Complete Message Docu Documentation From CNV_MBT_DEX015 up to CON_FIN_CO009

This documentation is copyright by SAP AG.
Count: 2402 Skipped: 7
Message Docu
Description
Import path: & ( CNV_MBT_DEX 036 )
Variant to predefine the DEX_TYPE is missing in table CNVMNTIMG ( CNV_MBT_DEX 062 )
RFC mode has been activated for package & ( CNV_MBT_DEX 205 )
DEX header save was cancelled ( CNV_MBT_DEX 211 )
& & ,merged with the Standard TDMS process. ( CNV_MBT_IS 007 )
& & ,can not be merged with the standard TDMS process. ( CNV_MBT_IS 008 )
Merge Operation Successful. ( CNV_MBT_IS 009 )
Merge Operation unsuccessful. ( CNV_MBT_IS 010 )
& & ,can not be merged with the Std.TDMS process. Error: Table-& client-& ( CNV_MBT_IS 015 )
Insert Failed for object type & Object & ( CNV_MBT_IS 018 )
Insert Failed for object type & Object & table & ( CNV_MBT_IS 019 )
Merge Operation unsuccessful, Check Activity Log ( CNV_MBT_IS 021 )
& & ,de-activated from the Standard TDMS process. ( CNV_MBT_IS 022 )
Merge operation has not been saved, Rollback has been done. ( CNV_MBT_IS 023 )
Activity &,merged with the Standard TDMS process. ( CNV_MBT_IS 024 )
Modification behaviour not specified for & &. ( CNV_MBT_IS 030 )
Simulation of table &1 did not generate log entries ( CNV_MBT_ME 002 )
Activity started successfully ( CNV_MBT_NE 001 )
Activity started with error(s) ( CNV_MBT_NE 002 )
Activity finished successfully ( CNV_MBT_NE 003 )
Activity finished with warning(s) ( CNV_MBT_NE 004 )
Activity finished with error(s) ( CNV_MBT_NE 005 )
Activity terminated ( CNV_MBT_NE 006 )
Could not change RFC Destination &1. ( CNV_MBT_SNAP 203 )
Logging of message &2(&1) type &3 suppressed (limit of &4 msgs. reached) ( CNV_MBT_ULV 001 )
Message &2(&1) type &3 occured &4 more times ( CNV_MBT_ULV 002 )
Too many messages with callback logged (limit &1) ( CNV_MBT_ULV 003 )
Too many messages with context data logged (limit &1) ( CNV_MBT_ULV 004 )
Error downloading protocol. Check if you have another protocol open. ( CNV_MBT_ULV 030 )
Table &1 is client independant ( CNV_MBT_XAPP_A 004 )
Transaction does not exist ( CNV_MBT_XAPP_A 006 )
Activity &1 does not exist ( CNV_MBT_XAPP_A 007 )
Switch off the &1 parameter; see setting from transaction &2 ( CNV_MBT_XAPP_A 021 )
'Database logging' is set to &1 mode; switch to &2 mode ( CNV_MBT_XAPP_A 022 )
Conversion of logical system names is activated ( CNV_MBT_XAPP_A 028 )
Conversion of logical system names is deactivated ( CNV_MBT_XAPP_A 029 )
Logical system name &1 will be renamed as &2 ( CNV_MBT_XAPP_A 030 )
&1 is invalid; enter a valid logical system ( CNV_MBT_XAPP_A 058 )
New logical system name for &1 is &2 ( CNV_MBT_XAPP_A 059 )
Sender and receiver logical systems & are identical ( CNV_MBT_XAPP_A 061 )
Object &1: knowledge base does not contain info. about customer objects ( CNV_NCE_BAS 004 )
&1 &2 New temporary interval &3 (&4) ( CNV_NCE_BAS 027 )
&1 &2 Actual number level of interval &3 is &4 ( CNV_NCE_BAS 028 )
Subobject &1, Range &2: new interval with year &3 (subobject mapping) ( CNV_NCE_BAS 036 )
Subobject mapping has been changed since the last analysis run ( CNV_NCE_BAS 038 )
&1 Range &2 &3: no analysis data ( CNV_NCE_BAS 039 )
&1 Range &2 &3: unable to define target interval ( CNV_NCE_BAS 042 )
&1 New interval &2 &3 &4 ( CNV_NCE_BAS 043 )
&1 &2 Single mapping for &3 conflicts with no. range interval mapping ( CNV_NCE_BAS 045 )
Number range object &1 is excluded from conversion ( CNV_NCE_BAS 055 )
&1 Range &2 &3: number range interval is alphanumeric ( CNV_NCE_BAS 056 )
Table NRIV was changed: &1 range &2 &3 was deleted ( CNV_NCE_BAS 069 )
Table NRIV was changed: &1 range &2 &3 was created ( CNV_NCE_BAS 070 )
All number range intervals for object &1 are excluded from the conversion ( CNV_NCE_BAS 071 )
Invalid pattern &1 for interval &2 &3 &4 ( CNV_NCE_BAS 072 )
New relevant SAP number range object &1 found ( CNV_NCE_BAS 074 )
Customer number range object &1 found ( CNV_NCE_BAS 075 )
&1 Range &2 &3: mapping values result in duplicate numbers ( CNV_NCE_BAS 076 )
Serious changes detected for Object &1, execute initialization step again ( CNV_NCE_BAS 088 )
One to One Mapping not changeable ( CNV_NCE_BAS 090 )
NR interval &1: unable to define interval limits due to ambiguity ( CNV_NCE_BAS 102 )
NR interval &1 overlaps with another NR interval ( CNV_NCE_BAS 103 )
NR interval &1: interval for year &2 extracted ( CNV_NCE_BAS 104 )
NR mapping values for &1 and &2 result in duplicates (number &3) ( CNV_NCE_BAS 108 )
1:1 and NR mapping values for &1 and &2 result in duplicates (number &3) ( CNV_NCE_BAS 110 )
NR mapping values for &1 and &2 could result in duplicates ( CNV_NCE_BAS 111 )
1:1 and NR mapping values for &1 and &2 could produce duplicates (no. &3) ( CNV_NCE_BAS 112 )
Changes detected in table NRIV, initialization of mappings is required ( CNV_NCE_BAS 123 )
NR interval &1: no one-to-one mapping values found ( CNV_NCE_BAS 137 )
NR interval &1: offset &2 is not valid ( CNV_NCE_BAS 139 )
NR interval &1: offset &2 is invalid (out of range) ( CNV_NCE_BAS 140 )
NR interval &1: function module name is not specified ( CNV_NCE_BAS 141 )
NR interval &1: function module &2 is not found ( CNV_NCE_BAS 142 )
NR interval &1: alphanumeric pattern '&2' is not allowed ( CNV_NCE_BAS 144 )
NR interval &1: pattern '&2' is not valid ( CNV_NCE_BAS 145 )
NR interval &1: pattern '&2' has an incorrect length ( CNV_NCE_BAS 146 )
NR interval &1: offset mode is not possible ( CNV_NCE_BAS 147 )
NR interval &1: shifting mode is not possible ( CNV_NCE_BAS 148 )
NR interval &1: pattern '&2' is not valid (out of range) ( CNV_NCE_BAS 150 )
NR interval &1: source and target NR intervals are not identical ( CNV_NCE_BAS 151 )
NR interval &1: source and target NR interval limits must be equivalent ( CNV_NCE_BAS 152 )
NR interval &1: non-shifting conv. rule exists for the target interval ( CNV_NCE_BAS 155 )
NR interval &1: order in a shifting group is incorrect ( CNV_NCE_BAS 157 )
NR interval &1: interval cannot be excluded (one-to-one mappings exist) ( CNV_NCE_BAS 159 )
NR interval &1: conflict with a NR number mapping ( CNV_NCE_BAS 160 )
NR interval &1: target NR number differs from the source NR number ( CNV_NCE_BAS 161 )
NR interval &1: function module &2 differs from a predefined pattern ( CNV_NCE_BAS 162 )
Number &1: one-to-one and NR mappings have different target intervals ( CNV_NCE_BAS 169 )
NR interval &1: target interval is too short (out of range) ( CNV_NCE_BAS 174 )
No customizing settings for object &1 exist ( CNV_NCE_BAS 176 )
Changes in subobject mappings are detected ( CNV_NCE_BAS 177 )
New numbers without mapping values are found (number &1) ( CNV_NCE_BAS 182 )
Conversion tracking is switched OFF for object &1 ( CNV_NCE_BAS 200 )
Conversion tracking is switched ON for object &1 ( CNV_NCE_BAS 201 )
Number &1: target number is changed from &2 to &3 ( CNV_NCE_BAS 203 )
Temporary interval &1: target numbers fall into NR interval &2 ( CNV_NCE_BAS 204 )
NR interval &1: pattern results in duplicates ( CNV_NCE_BAS 232 )
New NR interval &1 created in the target subobject ( CNV_NCE_BAS 243 )
Mapping values are not valid; conversion simulation is not possible ( CNV_NCE_BAS 246 )
Number range interval &1; no changes of target numbers allowed ( CNV_NCE_BAS 248 )
No relevant mapping values found in file &1 ( CNV_NCE_BAS 251 )
Row &1: conversion rule is ambiguous ( CNV_NCE_BAS 253 )
Row &1: conversion rule &2 is not valid ( CNV_NCE_BAS 255 )
No relevant number range objects found ( CNV_NCE_BAS 407 )
No mapping data found for this conversion package ( CNV_NCE_BAS 417 )
Source number range interval could not be determined ( CNV_NCE_BAS 420 )
Target number range interval could not be determined ( CNV_NCE_BAS 421 )
Source and target number range intervals could not be determined ( CNV_NCE_BAS 422 )
Fiscal year is required ( CNV_NCE_BAS 423 )
Information is not complete ( CNV_NCE_BAS 424 )
Number range interval &1/&2/&3/&4 is excluded from conversion ( CNV_NCE_BAS 425 )
Number range must have order = 1 ( CNV_NCE_BAS 426 )
Duplicate mapping values for number range intervals found ( CNV_NCE_BAS 427 )
Duplicate one-to-one mapping values found ( CNV_NCE_BAS 428 )
This number range interval must have the highest shifting order ( CNV_NCE_BAS 429 )
Cannot skip simulation for overlapping no. range intervals ( CNV_NCE_BAS 430 )
Non-shifting mapping exists for the target interval ( CNV_NCE_BAS 431 )
Project identifier for package &1 could not be found ( CNV_NCE_BAS 432 )
Simulation for number range interval &1 will run during system lock ( CNV_NCE_BAS 434 )
Number range intervals for object &1 were changed ( CNV_NCE_BAS 436 )
Number range object &1 is not analyzed yet ( CNV_NCE_BAS 437 )
Activities must be repeated for number range object &1 (s. long text) ( CNV_NCE_BAS 438 )
Pattern '&2' is too long ( CNV_NCE_BAS 440 )
Error while calling user interface ( CNV_NCE_BAS 441 )
Number range object &1 does not exist ( CNV_NCE_BAS 442 )
One-to-one mappings for object will not be processed ( CNV_NCE_BAS 451 )
No conversion rule maintained for object ( CNV_NCE_BAS 452 )
Conflict with another unique target number range interval detected ( CNV_NCE_BAS 453 )
Target number range is not alphanumeric ( CNV_NCE_BAS 454 )
Duplicate values in number range interval detected ( CNV_NCE_BAS 500 )
Evaluate a date before selecting it as the data slice date ( CNV_TDMS_01_SCEN_A 009 )
'Find' can be done only for one field at a time ( CNV_TDMS_01_SCEN_A 012 )
Evaluation failed for date &1 ( CNV_TDMS_01_SCEN_A 014 )
Data is already saved ( CNV_TDMS_01_SCEN_A 022 )
Select a row from the list ( CNV_TDMS_01_SCEN_A 023 )
Selected date is invalid ( CNV_TDMS_01_SCEN_A 024 )
Selected data slice date is &1 ( CNV_TDMS_01_SCEN_A 026 )
Required data not available ( CNV_TDMS_01_SCEN_A 027 )
Client IDs of sender system and receiver system differ ( CNV_TDMS_01_SCEN_A 028 )
Client & customized as 'Production' ( CNV_TDMS_01_SCEN_A 031 )
Evaluation failed; required customizing data not available ( CNV_TDMS_01_SCEN_A 033 )
Automatic calculation of data slice date failed ( CNV_TDMS_01_SCEN_A 035 )
Predecessor &1 of Activity &2 not completed in Package &3 for Phase &4 ( CNV_TDMS_01_SCEN_A 036 )
Organizational units were not updated ( CNV_TDMS_01_SCEN_A 042 )
Organizational units not maintained in the sender system ( CNV_TDMS_01_SCEN_A 043 )
Required customizing data not available ( CNV_TDMS_01_SCEN_A 048 )
Organizational units for transfer not copied to the refresh package ( CNV_TDMS_01_SCEN_A 050 )
Some org. units are inconsistent; see protocol and continue ( CNV_TDMS_01_SCEN_A 051 )
RFC Error: &1 &2 ( CNV_TDMS_01_SCEN_A 068 )
Inconsistent customizing of org. units and their fiscal year variants ( CNV_TDMS_01_SCEN_A 078 )
For '&1': '&2', Posting Period assigned based on assumption ( CNV_TDMS_01_SCEN_A 081 )
Calculated data transfer volume is &1 KB ( CNV_TDMS_02_SIZE_A 006 )
Uploaded file is not in the correct format ( CNV_TDMS_02_SIZE_A 050 )
Predecessor activity &1 is not finished yet ( CNV_TDMS_02_SIZE_A 054 )
SAP Standard settings are used ( CNV_TDMS_02_SIZE_A 060 )
RFC Error: &1 &2 ( CNV_TDMS_02_SIZE_A 068 )
Phase &1 has already been confirmed ( CNV_TDMS_02_SIZE_A 069 )
Size and index details could not be obtained for table &1 ( CNV_TDMS_02_SIZE_A 074 )
Selection group cannot be changed for selected table & ( CNV_TDMS_02_SIZE_A 111 )
Settings for selected table cannot be changed ( CNV_TDMS_02_SIZE_A 113 )
Table &1 (&2 KB) is large; use table splitting before data export ( CNV_TDMS_02_SIZE_A 201 )
Settings are confirmed for Migration Package &1 ( CNV_TDMS_03_REDUC_A 003 )
No selection groups are available for Migration Package &1 ( CNV_TDMS_03_REDUC_A 009 )
No master selection group values are maintained for selection group &1 ( CNV_TDMS_03_REDUC_A 010 )
Not all activities of phase &1 have been executed yet ( CNV_TDMS_03_REDUC_A 011 )
No entries found in table CNVTDMS_01_SELEC for org. unit &1 ( CNV_TDMS_03_REDUC_A 012 )
Change will affect all tables in the migration object ( CNV_TDMS_03_REDUC_A 017 )
Select a single row ( CNV_TDMS_03_REDUC_A 019 )
Mig. object &1: selection group not assigned ( CNV_TDMS_03_REDUC_A 021 )
Mig. object &1 table &2: Both 'No Transfer' and 'Full Transfer' are set ( CNV_TDMS_03_REDUC_A 022 )
Mig. object &1 table &2: Sel. group is active though 'No Transfer'is set ( CNV_TDMS_03_REDUC_A 023 )
Mig. object &1: A Sel. group is active though 'Full Transfer' is set ( CNV_TDMS_03_REDUC_A 024 )
You are marking a Standard Reduced table as 'Full Transfer' ( CNV_TDMS_03_REDUC_A 033 )
No organizational unit members for selection groups are defined ( CNV_TDMS_03_REDUC_A 036 )
No details are available for sel. group &1, org.unit &2=&3, field type &4 ( CNV_TDMS_03_REDUC_A 038 )
No details are available for selection group &1, field type &2 ( CNV_TDMS_03_REDUC_A 039 )
No field name has been maintained for Element Type &1 in Mig. Package &2 ( CNV_TDMS_03_REDUC_A 040 )
Field details not found for table &1 in migration object &1 ( CNV_TDMS_03_REDUC_A 041 )
Values assigned to selection groups successfully ( CNV_TDMS_03_REDUC_A 042 )
No selection groups are available for Table &1 ( CNV_TDMS_03_REDUC_A 076 )
Error in Selection group reference for Migration object &1 ( CNV_TDMS_03_REDUC_A 083 )
Tables with size GT &1 and tableclass other than &2 only are displayed ( CNV_TDMS_03_REDUC_A 084 )
Number of entries selected by this selection criteria exceeds 500 ( CNV_TDMS_04_A 057 )
Size prediction will be executed within System Analysis phase ( CNV_TDMS_05_A 021 )
The header table &1 is not filled ( CNV_TDMS_05_A 160 )
For table &1, deletion TECHNIQUE is set to A, SELECTION is set to R ( CNV_TDMS_05_A 512 )
For table &1, deletion TECHNIQUE is set to A, SELECTION is set to F ( CNV_TDMS_05_A 513 )
Selection is incomplete due to wrong execution of one of Predecessor ( CNV_TDMS_05_A 806 )
Inappropriate use of cluster technique for one of predecssor activity ( CNV_TDMS_05_A 807 )
Object &1 switched off ( CNV_TDMS_05_CT_A 009 )
In table &1, the field &2 does not exist; no selection group is assigned ( CNV_TDMS_05_CT_A 039 )
No table entries found in & ( CNV_TDMS_05_CT_A 042 )
Entry for migration object & not found in table TMC4 ( CNV_TDMS_05_CT_A 043 )
New Jest Solution Can not be Activated.Please see long text. ( CNV_TDMS_05_JEST 000 )
Exclusion of all text objects can cause inconsistency in the receiver ( CNV_TDMS_06_A 037 )
No additional tables have been included/excluded for transfer ( CNV_TDMS_06_A 052 )
Maintaining user-defined HR tables activity is canceled by the user ( CNV_TDMS_06_A 053 )
Receiver client &1 is a production client ( CNV_TDMS_08_A 054 )
Client &1 is flagged as a production client in customizing ( CNV_TDMS_08_A 055 )
Data transfer is carried out including a client conversion ( CNV_TDMS_08_A 061 )
You can change the RFC connection now ( CNV_TDMS_08_A 062 )
Processing of the client check (RFC) has been terminated ( CNV_TDMS_08_A 063 )
Report cannot be deleted ( CNV_TDMS_08_A 070 )
No client was selected for deletion; changes were saved into database ( CNV_TDMS_09_A 028 )
Client(s) other than the transfer client selected for deletion ( CNV_TDMS_09_A 033 )
No data exists in Table & for Migration Package & ( CNV_TDMS_09_A 101 )
Table & does not exist ( CNV_TDMS_09_A 106 )
Table TADIR is empty ( CNV_TDMS_09_A 110 )
Profile parameter dbs/db4/use_hints do not allow SQL hints ( CNV_TDMS_09_A 111 )
Client-specific table & for package & does not exist in CNVTDMS_09_TABLE ( CNV_TDMS_09_A 204 )
Table & for Migration Package & does not exist ( CNV_TDMS_09_A 208 )
Determination of not active indexes successfully executed ( CNV_TDMS_09_A 355 )
Previously not active indexes successfully checked ( CNV_TDMS_09_A 356 )
Scheduling error ( CNV_TDMS_09_A 405 )
Error while modifying table & ( CNV_TDMS_09_A 406 )
Error while starting subactivity & ( CNV_TDMS_09_A 412 )
Error in writing/updating the parameter &1 ( CNV_TDMS_09_A 414 )
RFC error while calling Function &1 ( CNV_TDMS_09_A 415 )
'Overall Array-Delete' technique is active ( CNV_TDMS_09_A 502 )
It is not possible to define the deletion method at the package level ( CNV_TDMS_09_A 509 )
Field SELECTION of table CNVTDMS_09_PACK is empty; check entry ( CNV_TDMS_09_A 511 )
The copy variant &1 does not exist ( CNV_TDMS_10_COPY 002 )
No valid root package found for Migration Package &1 ( CNV_TDMS_10_COPY 003 )
No status found for Activity &2 of Migration Package &1 ( CNV_TDMS_10_COPY 007 )
No TDMS-specific copy Customizing for Migration Package &1 found ( CNV_TDMS_10_COPY 012 )
Activity &1 (&3) could not be deleted from Migration Package &2 ( CNV_TDMS_10_COPY 020 )
Error by replacing of Activity &1 (&3) in Migration Package &2 ( CNV_TDMS_10_COPY 021 )
Error when inserting Activity &1 after &2 (&4) in Migration Package &3 ( CNV_TDMS_10_COPY 022 )
Deletion of customer=X records terminated with RC = &1 ( CNV_TDMS_10_COPY 032 )
Package &1 not usable as template for Refresh package ( CNV_TDMS_10_COPY 033 )
Number range for address number allocation is inconsistent ( CNV_TDMS_11_ADRSCR_A 005 )
No address number could be determined ( CNV_TDMS_11_ADRSCR_A 006 )
Error at Address scramble ( CNV_TDMS_11_ADRSCR_A 012 )
Error in range number determination: check your number ranges database ( CNV_TDMS_11_ADRSCR_A 014 )
Generation Code MODEL error; see long text ( CNV_TDMS_13_SHELL 057 )
Subroutine Generation error; see long text ( CNV_TDMS_13_SHELL 058 )
Enter a valid standard or package template number (F4) ( CNV_TDMS_13_SHELL 062 )
Output values will only be refreshed after you press ENTER twice ( CNV_TDMS_13_SHELL 065 )
Function CNV_TDMS_13_SHELL_MODIFY_CODE "INCLUDE" error; see long text ( CNV_TDMS_13_SHELL 066 )
Function CNV_TDMS_13_SHELL_MODIFY_CODE "SEARCH" error; see long text ( CNV_TDMS_13_SHELL 067 )
Function CNV_TDMS_13_SHELL_MODIFY_CODE "GENERATE" error; see long text ( CNV_TDMS_13_SHELL 068 )
You do not have S_DATASET read authorizations in the system & ( CNV_TDMS_13_SHELL 071 )
Template switch rejected; return to the previous selection ( CNV_TDMS_13_SHELL 074 )
File contains lines that are wider than data element CNVTDMS_13_REC ( CNV_TDMS_13_SHELL 076 )
Structure of file & unknown ( CNV_TDMS_13_SHELL 081 )
Specified directory does not contain the required files ( CNV_TDMS_13_SHELL 106 )
Enter the e-mail address for your user (&1) using transaction SU01 ( CNV_TDMS_16_CHECK_TS 001 )
Schedule a job to monitor used tablespace after data transfer starts. ( CNV_TDMS_16_CHECK_TS 028 )
Your e-mail ID must be configured on the mail server used by this system. ( CNV_TDMS_16_CHECK_TS 029 )
Job to monitor receiver system tablespace statistics is already running. ( CNV_TDMS_16_CHECK_TS 037 )
No data retrieved for your selection criteria; see long text ( CNV_TDMS_BANK_X 012 )
RFC destination is not set; see long text ( CNV_TDMS_BP_MODELER 000 )
Enter valid time-based TDMS package for SAP ERP ( CNV_TDMS_BW_P 018 )
F4 help not available ( CNV_TDMS_BW_P 019 )
No entries to be displayed ( CNV_TDMS_BW_P 027 )
Data slice date selected from the TDMS package for SAP ERP ( CNV_TDMS_BW_P 043 )
No tables identified with client in intransparent fields ( CNV_TDMS_BW_P 068 )
No aggregates are marked for fill ( CNV_TDMS_BW_P 076 )
Fiscal year variant & not found ( CNV_TDMS_BW_P 080 )
No additional tables selected for reduction ( CNV_TDMS_BW_P 086 )
No data to be calculated ( CNV_TDMS_BW_P 088 )
Fiscal Year variants not maintained! See Longtext ( CNV_TDMS_BW_P 091 )
Change Mode not possible as settings are confirmed ( CNV_TDMS_BW_P 092 )
Conversion objects cannot be reduced based on org. characteristics ( CNV_TDMS_BW_P 094 )
&1 is invalid; enter a valid logical system ( CNV_TDMS_BW_P 095 )
Some invalid entries made under Logical System Name in the Receiver Syst. ( CNV_TDMS_BW_P 096 )
Log. sys. name of the sender sys. copied to the recver sys.; see long txt ( CNV_TDMS_BW_P 112 )
You have not made an entry under Logical System Name of the Receiver Sys. ( CNV_TDMS_BW_P 114 )
SAP Standard settings applied for technical content and cannot be edited ( CNV_TDMS_BW_P 117 )
Data needed for integration collected successfully ( CNV_TDMS_BW_P 137 )
Logical system for ERP receiver not found ( CNV_TDMS_BW_P 138 )
New data selection logic prepared for Object &1 ( CNV_TDMS_BW_P 145 )
Error while preparing new data selection logic for object &1 ( CNV_TDMS_BW_P 146 )
Systems are already in sync ( CNV_TDMS_BW_P 158 )
This package is not a valid ERP package ( CNV_TDMS_CRD_P 000 )
This package is not a valid TDMS package for SAP CRM ( CNV_TDMS_CRD_P 001 )
The dates and data required for the delta load were obtained ( CNV_TDMS_CRD_P 012 )
Execute the TDMS package for SAP ERP before the TDMS package for SAP CRM ( CNV_TDMS_CRD_P 020 )
TDMS R/3 package ID &1 was inserted as TLI activity parameter ( CNV_TDMS_CRD_P 022 )
TDMS R/3 package ID &1 could not be inserted as TLI activity parameter ( CNV_TDMS_CRD_P 023 )
Invalid return code from BPL API ( CNV_TDMS_CRD_P 029 )
Transaction data could not be saved ( CNV_TDMS_CRD_P 032 )
Transaction ID could not be obtained ( CNV_TDMS_CRD_P 034 )
RFC Destinations to the reference ERP systems are now available ( CNV_TDMS_CRD_P 046 )
No data was selected for the type &1 ( CNV_TDMS_CRD_X 000 )
Data for BDOC type &1 and BDOC ID &2 does not exist; message text: &3 ( CNV_TDMS_CRD_X 001 )
Start date and end date for the activity were not selected ( CNV_TDMS_CRD_X 003 )
Enter valid time based TDMS package for SAP ERP ( CNV_TDMS_CRM_P 003 )
Text not found ( CNV_TDMS_CRM_P 004 )
Data related to the data slice date could not copied for Mig. Pkg. &1 ( CNV_TDMS_CRM_P 005 )
Error in updating database; data slice date not copied for Mig. Pkg. &1 ( CNV_TDMS_CRM_P 006 )
&1 is not a valid TDMS package for SAP ERP ( CNV_TDMS_CRM_P 017 )
RFC Destination &1 does not exist in the sender system ( CNV_TDMS_CRM_P 030 )
RFC Destination &1 does not exist in the receiver system ( CNV_TDMS_CRM_P 031 )
Enter a valid RFC Destination ( CNV_TDMS_CRM_P 034 )
You have selected an RFC dest. that does not exist in the receiver system ( CNV_TDMS_CRM_P 038 )
Program supports Oracle and MSSQL as the Database ( CNV_TDMS_CRM_P 039 )
No further processing (contact your system administrator) ( CNV_TDMS_CRM_X 006 )
Rel. Ver. of &1 in sender sys. and recvr sys. not identical; see long txt ( CNV_TDMS_CROSS_APPS 002 )
IBASE records not inserted into the CNVTDMSCRM_IBASE table ( CNV_TDMS_CRU_X 017 )
DDIC comparison should not be performed on same system ( CNV_TDMS_DDIC_CMP 003 )
DDIC Comparison is still in process for this RFC Combination ( CNV_TDMS_DDIC_CMP 005 )
There are no new migr. objs. relavant to EhP Version &1 to be added ( CNV_TDMS_EHP 000 )
Migration objects related to EhP Version &1 not added; see long text ( CNV_TDMS_EHP 004 )
Modification behavior not specified for &1 ID:&2; see long text ( CNV_TDMS_EHP 005 )
Obj. Type: &1 ID: &2 not modified for mig. pkg.; see long text ( CNV_TDMS_EHP 009 )
Destination for sender system not found - SUBRC &1 ( CNV_TDMS_HCM 003 )
Destination for receiver system not found - SUBRC &1 ( CNV_TDMS_HCM 004 )
No countries have been customized for the current package ( CNV_TDMS_HCM 005 )
The number of records you selected for OTYPE & is greater than allowed ( CNV_TDMS_HCM 007 )
Error with generation of cluster import and export code ( CNV_TDMS_HCM 009 )
Table CNVHCM_CLSTDEF contains no data for the given cluster criteria ( CNV_TDMS_HCM 010 )
Error with generation of TDMS export code ( CNV_TDMS_HCM 013 )
No valid data was selected with this criteria ( CNV_TDMS_HCM 018 )
The number range object & does not exist ( CNV_TDMS_HCM 022 )
The target range table contains no valid data for your user ( CNV_TDMS_HCM 023 )
The target range table contains no valid data for the object type & ( CNV_TDMS_HCM 025 )
You do not have sufficient authorizations to execute this program ( CNV_TDMS_HCM 026 )
Destination for control system not found - SUBRC &1 ( CNV_TDMS_HCM 029 )
Target range for OTYPE & is not clear and DELETE option not selected ( CNV_TDMS_HCM 033 )
Specify an internal number range ( CNV_TDMS_HCM 047 )
Choose a number to be assigned which is greater than 0 ( CNV_TDMS_HCM 049 )
No transfer of interval for object &1 ( CNV_TDMS_HCM 051 )
An error occurred in FM NUMBER_RANGE_INTERVAL_UPDATE &1 &2 &3 &4 ( CNV_TDMS_HCM 056 )
No personal data (PA) could be found with the current selection criteria ( CNV_TDMS_HCM 058 )
ASSIGN error in the CNV_TDMS_HCM_SCRAMBLE_DATA function module ( CNV_TDMS_HCM 059 )
You have selected a target PERNR range for which you are not authorised ( CNV_TDMS_HCM 062 )
No country specific data was selected ( CNV_TDMS_HCM 064 )
There is no appropriate selection criteria for this display function ( CNV_TDMS_HCM 066 )
Table & is not registered as being released ( CNV_TDMS_HCM 068 )
Key selected for PLVAR &1, OTYPE &2, FROM &3; transferred to &4 ( CNV_TDMS_HCM 078 )
Scrambling rules exist for cluster & but there is no structure definition ( CNV_TDMS_HCM 083 )
You have incomplete selection criteria for OTYPE &1 ( CNV_TDMS_HCM 087 )
The table &1 does not exist in the sender system ( CNV_TDMS_HCM 088 )
You must successfully execute the "Confirm" function of the last activity ( CNV_TDMS_HCM 099 )
Execute the "Confirm" function of the last activity ( CNV_TDMS_HCM 100 )
No internationally relevant tables could be found ( CNV_TDMS_HCM 102 )
No customer tables could be found; they must be defined in customizing ( CNV_TDMS_HCM 103 )
An error occurred when initializing the scrambling; SUBRC &1 ( CNV_TDMS_HCM 104 )
An error occurred when defining the cursor for table &1 SUBRC &2 ( CNV_TDMS_HCM 105 )
The scrambling sequence is incorrect ( CNV_TDMS_HCM 107 )
No 'CP' Object Type records will be transferred from the sender system ( CNV_TDMS_HCM 122 )
No 'CP' Object Type records can be transferred to the receiver system ( CNV_TDMS_HCM 123 )
No 'CP' Object can be selected - a higher HR support package is needed ( CNV_TDMS_HCM 124 )
You have no more free OBJID for OTYPE &. ( CNV_TDMS_HCM 125 )
You have entered an invalid constellation of Project-Subproject-Pack ID ( CNV_TDMS_HCM 126 )
The table & had to be removed from the table transfer list ( CNV_TDMS_HCM 127 )
No HCM RFC destination could be found ( CNV_TDMS_HCM 129 )
You lack authorizations for certain data - see long text ( CNV_TDMS_HCM 158 )
Logical database authorisations should be switched off --> Long Text ( CNV_TDMS_HCM 159 )
Generic entry error. This is explained in the long text ( CNV_TDMS_HCM 164 )
The sender system user is non-dialog and the SND_LOGON value is not set ( CNV_TDMS_HCM 171 )
Please check validity of object type ( CNV_TDMS_HCM 172 )
The target PERNR & is registered as having multiple sources ( CNV_TDMS_HCM 173 )
The cluster & was skipped because of insufficient authorizations ( CNV_TDMS_HCM 175 )
& Number range error. Number range &1; SUBRC &2 - see long text ( CNV_TDMS_HCM 177 )
You do not have sufficient authorisations to execute the confirm function ( CNV_TDMS_HCM 181 )
Error writing access plan data ( CNV_TDMS_HCM 182 )
You have entered an invalid Domain / Data Element / Field combination ( CNV_TDMS_HCM 183 )
You do not have the PE03 authorization for the object & ( CNV_TDMS_HCM 184 )
There is no entry in the CNVHCM_SWITCH for the value & ( CNV_TDMS_HCM 185 )
The table & from table grouping & isnt in the Table Transfer Status table ( CNV_TDMS_HCM 201 )
The VADM cluster NO can not be scrambled. It is excluded from transfer ( CNV_TDMS_HCM 204 )
No data was selected. Check the log. ( CNV_TDMS_HCM 207 )
The TDMS4HCM BADI has been implemented ( CNV_TDMS_HCM 215 )
& appraisers were added to the list of personnal numbers to transfer ( CNV_TDMS_HCM 225 )
The appraiser & was added to the list of personnal numbers to transfer ( CNV_TDMS_HCM 226 )
Selection ID "&1 - &2" has multiple plan versions ( CNV_TDMS_HCM 233 )
Selection ID "&1 - &2" contains objects other than P and CP ( CNV_TDMS_HCM 234 )
Report to generate Central Person for the transfered personnels executed ( CNV_TDMS_HCM 240 )
Report to generate posting run for the transfered personnels executed ( CNV_TDMS_HCM 241 )
Report to generate external personnel ID's executed ( CNV_TDMS_HCM 243 )
Choose refresh on migration process tree after execution of the activity ( CNV_TDMS_HCM 250 )
& & ,merged with the Standard TDMS process. ( CNV_TDMS_ISSOL_A 007 )
& & ,can not be merged with the standard TDMS process. ( CNV_TDMS_ISSOL_A 008 )
Merge Operation Successful. ( CNV_TDMS_ISSOL_A 009 )
Merge Operation unsuccessful. ( CNV_TDMS_ISSOL_A 010 )
& & ,can not be merged with the Std.TDMS process. Error: Table-& client-& ( CNV_TDMS_ISSOL_A 015 )
Insert Failed for object type & Object & ( CNV_TDMS_ISSOL_A 018 )
Insert Failed for object type & Object & table & ( CNV_TDMS_ISSOL_A 019 )
Merge Operation unsuccessful, Check Activity Log ( CNV_TDMS_ISSOL_A 021 )
& & ,de-activated from the Standard TDMS process. ( CNV_TDMS_ISSOL_A 022 )
Merge operation has not been saved, Rollback has been done. ( CNV_TDMS_ISSOL_A 023 )
Activity &,merged with the Standard TDMS process. ( CNV_TDMS_ISSOL_A 024 )
Modification behaviour not specified for & &. ( CNV_TDMS_ISSOL_A 030 )
Component &1 is not activated; see long text ( CNV_TDMS_SCM_P 001 )
Order Type &1 is not activated; see long text ( CNV_TDMS_SCM_P 002 )
Order Area &1 is not activated; see long text ( CNV_TDMS_SCM_P 003 )
Time Series Profile &1 is not activated; see long text ( CNV_TDMS_SCM_P 004 )
Time Series Data Type &1 is not activated; see long text ( CNV_TDMS_SCM_P 005 )
Time Series Area &1 is not activated; see long text ( CNV_TDMS_SCM_P 006 )
Enter a valid planning version; see long text ( CNV_TDMS_SCM_P 014 )
No planning versions specified; Planning Version 000 will be transferred ( CNV_TDMS_SCM_P 015 )
Planning Version 000 does not exist in the system; see long text ( CNV_TDMS_SCM_P 017 )
System-generated tables are not available in the sender system ( CNV_TDMS_SCM_P 018 )
Details of the background job are not available; see long text ( CNV_TDMS_SCM_P 020 )
Master data is not uploaded into the SAP liveCache in the receiver system ( CNV_TDMS_SCM_P 022 )
SAP liveCache table is not available for transfer; see long text ( CNV_TDMS_SCM_P 024 )
Maintain planning versions in the sender system ( CNV_TDMS_SCM_P 027 )
Issue with predecessor activity ( CNV_TDMS_SCR 039 )
Issue with successor activity ( CNV_TDMS_SCR 040 )
Rule &1 and Rule &2 have the same Table-Field comb.: &3; see long text ( CNV_TDMS_SCR_UI 040 )
Error while saving data; see long text ( CNV_TDMS_SCR_UI 041 )
Error while retrieving data from the database; see long text ( CNV_TDMS_SCR_UI 042 )
Error while deleting the scrambling object; see long text ( CNV_TDMS_SCR_UI 043 )
Error during the creation of the scrambling ID; see long text ( CNV_TDMS_SCR_UI 044 )
Error while deleting the scrambling ID; see long text ( CNV_TDMS_SCR_UI 050 )
Error while saving scrambling values; see long text ( CNV_TDMS_SCR_UI 051 )
Error while assigning scrambling objects; see long text ( CNV_TDMS_SCR_UI 052 )
Error while unassigning scrambling objects; see long text ( CNV_TDMS_SCR_UI 053 )
Error while transferring scrambling values; see long text ( CNV_TDMS_SCR_UI 054 )
Solution category assigned to the Rule &1 cannot be changed; see long txt ( CNV_TDMS_SCR_UI 068 )
Soln Cat. assigned to the Global mapping &1 cannot be changed;see lng txt ( CNV_TDMS_SCR_UI 069 )
Solution Category assigned to the Group &1 cannot be changed; see lng txt ( CNV_TDMS_SCR_UI 070 )
Field cannot be fetched without a table name; enter a valid table name. ( CNV_TDMS_SCR_UI 149 )
Include &1 exceeds the maximum allowed character restriction(72) chars ( CNV_TDMS_SCR_UI 169 )
No supergroup exists for the selected solution category ( CNV_TDMS_SCR_UI 171 )
No group exists under the selected supergroup ( CNV_TDMS_SCR_UI 172 )
Old logical system name &1 that you entered does not exist; see long text ( CNV_TDMS_SCR_UI 175 )
Personnel Number scrambling is selected for a HR Package; ( CNV_TDMS_SCR_UI 178 )
Enter old values in the same format as that of data in the sndr/exc. sys ( CNV_TDMS_SCR_UI 179 )
Rule&1 uses the same fields as Rule&2,but condition sets are not assigned ( CNV_TDMS_SCR_UI 207 )
Rule &1 uses the same table-field combinations as Rule &2; see long text ( CNV_TDMS_SCR_UI 208 )
Procurement records not stored; see long text ( CNV_TDMS_SRM_X 003 )
No relevant records retrieved for &1 table; see long text ( CNV_TDMS_SRM_X 005 )
Object status records not stored; see long text ( CNV_TDMS_SRM_X 006 )
Texts not stored; see long text ( CNV_TDMS_SRM_X 007 )
SUS client is not available for Migration Package &1; see long text ( CNV_TDMS_SRM_X 009 )
Data uploaded is in the incorrect format; see Row & of the .CSV file ( CNV_TDMS_WD_A 001 )
Table &1 is cross-client ( CNV_TDMS_XAPP_A 004 )
Transaction does not exist ( CNV_TDMS_XAPP_A 006 )
Activity &1 does not exist ( CNV_TDMS_XAPP_A 007 )
Switch off the &1 parameter; see the settings from transaction &2 ( CNV_TDMS_XAPP_A 021 )
'Database logging' is set to &1 mode; switch to &2 mode ( CNV_TDMS_XAPP_A 022 )
Conversion of logical system names is activated ( CNV_TDMS_XAPP_A 028 )
Conversion of logical system names is deactivated ( CNV_TDMS_XAPP_A 029 )
Logical system name &1 will be renamed as &2 ( CNV_TDMS_XAPP_A 030 )
&1 is invalid; enter a valid logical system ( CNV_TDMS_XAPP_A 058 )
New logical system name for &1 is &2 ( CNV_TDMS_XAPP_A 059 )
Sender and receiver logical systems & are identical ( CNV_TDMS_XAPP_A 061 )
Uploaded excel not in progress analysis workbench (PAWB) format ( CN_EVWB 100 )
OBJNR missing in the uploaded excel ( CN_EVWB 101 )
Company code & is not defined (check entry) ( CO 001 )
You have no authorization for company code & ( CO 002 )
You have no authorization for plant & ( CO 004 )
You have no authorization for MRP group & ( CO 007 )
You have no authorization for order type & ( CO 008 )
Material & not found ( CO 009 )
Material & not found in plant & (check entry) ( CO 010 )
You have no authorization for Transaction & ( CO 011 )
Planned order & not found (check entry) ( CO 014 )
Missing entry in Table TCO01 for order type & ( CO 015 )
No valid entry in TC10 for Transaction & (transaction is terminated) ( CO 023 )
No lead time scheduling (enter start and finish date) ( CO 029 )
& is not a working day (next working day: &) ( CO 031 )
Date & is later than the validity period of the factory calendar ( CO 032 )
Date & is earlier than the validity period of the factory calendar ( CO 033 )
The factory calendar & does not exist (contact system administrator) ( CO 034 )
Date & is not a working day (previous working day: &) ( CO 035 )
Planned order & is not to be converted ( CO 041 )
You have no authorization in plant & for order type & ( CO 042 )
No authorization for converting pld. order in plant & MRP group & ( CO 043 )
Material & not found in plant & ( CO 044 )
Material type & is not defined (check entry) ( CO 045 )
Material & cannot be produced in-house ( CO 046 )
Material & is planned for external procurement ( CO 047 )
In-house production is not intended for material & status & ( CO 050 )
The order/network type & is not defined ( CO 051 )
Material status &1 of material &2 in plant &3 is not defined ( CO 053 )
No valid bill of material found ( CO 057 )
Object type & is not allowed for status ( CO 064 )
Status object already exists ( CO 065 )
Operation & is reference operation of sequence & (deletion not possible) ( CO 066 )
Availability log does not exist ( CO 067 )
MRP data of material & is not maintained ( CO 068 )
Accounting data of material & is not maintained ( CO 069 )
Work scheduling data of material & is not maintained ( CO 070 )
Purchasing data of material & is not maintained ( CO 071 )
Valuation type & is not defined (check entry) ( CO 075 )
Accounting data of material & is not maintained ( CO 076 )
External number assignment (enter valid order number) ( CO 080 )
External number is not in the number interval (&-&) ( CO 081 )
Order type & has internal number assignment (entry not required) ( CO 083 )
No text in language & plant & for scrap reason & (check entry) ( CO 095 )
Conversion between unit of entry and base unit of measure not possible ( CO 098 )
BOM & not found (check entry) ( CO 103 )
Present status of order & does not allow partial release ( CO 104 )
No routing application is defined for order type & in plant & ( CO 109 )
Changes cannot be carried out, since order & is locked ( CO 113 )
Release of order not possible ( CO 118 )
Scrap quantity is not smaller than the total order quantity ( CO 119 )
Order quantity is smaller than delivered quantity ( CO 120 )
Order quantity & increased by & & due to scrap ( CO 123 )
No parameters defined in plant & for generating operations ( CO 124 )
Present status of order & does not allow order release ( CO 127 )
Enter an item category ( CO 130 )
Bulk material indicator can no longer be set (qty already withdrawn) ( CO 132 )
Enter material for item category & ( CO 133 )
Do not enter material for item category & ( CO 134 )
Material type & cannot be used with item category & ( CO 135 )
Quantity must be positive for item category & ( CO 136 )
Quantity must be negative for item category & ( CO 137 )
Bulk material not allowed for items relevant to costing ( CO 140 )
Material release only possible via operation release ( CO 144 )
Bulk material and backflushing are mutually exclusive ( CO 149 )
Enter valid field name ( CO 163 )
Maintain a number range for order type & ( CO 166 )
Error occured in number assignment for completion confirmation ( CO 167 )
Error occured in number assignment for object & ( CO 168 )
Original- and partial printouts are not possible in display mode ( CO 175 )
Report & not found ( CO 193 )
Form not found (contact system administrator) ( CO 195 )
Report not found (contact system administrator) ( CO 196 )
Form not found (check entries) ( CO 198 )
Report not found (check entries) ( CO 199 )
No routing alternative could be selected ( CO 205 )
Control key & is not defined for routing application & ( CO 206 )
No suitable alternative found for lot size & date & ( CO 207 )
Routing application is not defined for order category & ( CO 218 )
There is no routing application defined for routing type & ( CO 219 )
Operation release rejected (order is locked) ( CO 221 )
Operation release rejected (order is technically complete) ( CO 225 )
Operation release is rejected (order is deleted) ( CO 226 )
Operation cannot be released (op. &, order &, sequence & is not released) ( CO 229 )
Operation cannot be released ( CO 230 )
Branch operation & not found in sequence & ( CO 231 )
Return operation & not found in sequence & ( CO 232 )
Smallest op. no. in parallel seq. & is smaller than the branch op. no. ( CO 235 )
Largest op. no. in parallel seq. & is greater than the return op. no. ( CO 236 )
Sub-operation & of operation & cannot be released ( CO 246 )
Operation & is a reference operation ( CO 250 )
You cannot delete the standard sequence ( CO 253 )
Order type &1 requires a routing (transaction terminated) ( CO 257 )
Order quantity & is outside planned lot sizes & - & & ( CO 260 )
Material &: No operations exist (transaction terminated) ( CO 262 )
Operation &: Deleted operations cannot be released ( CO 269 )
The last active operation cannot be deleted ( CO 274 )
Selective printing is only possible when creating reprints ( CO 275 )
You cannot create a sub-operation for deleted operation & ( CO 279 )
Price cannot be determined for material & ( CO 283 )
PRT availability could not be checked ( CO 285 )
Order type & plant &: No checking rule maintained for operation ( CO 288 )
Order & has missing parts (see log) ( CO 292 )
Material availability check cannot be carried out ( CO 293 )
Order type &: Maintain availability control for order creation ( CO 294 )
No PRTs allocated - availability check cannot be carried out ( CO 295 )
No materials allocated - availability check cannot be carried out ( CO 296 )
No planned order was selected for conversion ( CO 299 )
Multiple allocation of a component is not allowed ( CO 302 )
Quantity change carried out in dependent components ( CO 311 )
Project definitions differ ( CO 318 )
WBS element must not be entered for this customer order ( CO 319 )
Customer order item & & has no project --> acct assmt not at activity lvl ( CO 321 )
WBS element assignment not allowed ( CO 322 )
Sales order has no CO object ( CO 323 )
Sales document provides for project settlement - maintain WBS element ( CO 324 )
Current date scheduling: Start is set to current date ( CO 332 )
Order already posted ( CO 333 )
Item category &: Only base unit of measure & allowed ( CO 344 )
Component & already withdrawn ( CO 348 )
Overhead key & not found ( CO 362 )
Costing sheet & not found (check entry) ( CO 363 )
Number range & is not created for object & ( CO 367 )
Changes in order & critical due to rel. status of requisition ( CO 369 )
Invalid controlling area & (order controlling area &) ( CO 372 )
Requisition & cannot be processed after release ( CO 374 )
Availability check for phantom components (item &, mat. &) not possible ( CO 379 )
Availability & not defined with checking rule & - please create ( CO 387 )
Operation cannot be released (order is locked) ( CO 388 )
No requisition exists for operation & ( CO 390 )
No requisition exists for sub-operation & & ( CO 391 )
Number & for object & within critical area ( CO 393 )
Highest number & assigned for object & ( CO 394 )
Number & for order type & within critical area ( CO 395 )
Highest number & assigned for order type & ( CO 396 )
No lists could be determined for printing (&1, &2) ( CO 408 )
Error in form control ( CO 412 )
Order &: error in document control ( CO 420 )
Order &: error in list control ( CO 421 )
Order &: error in form control ( CO 422 )
Order &: error in report control ( CO 423 )
Order &: Error in transaction control ( CO 424 )
Printer & is not suitable for form & ( CO 427 )
Routing required - planned order cannot be converted ( CO 431 )
Order & does not have the correct order category ( CO 436 )
Inspection lot & for order & does not have necessary status ( CO 440 )
Reference & not used since it does not contain any text lines ( CO 450 )
Costing variant & is not permitted ( CO 452 )
Costs already calculated - you can no longer delete the costing variant ( CO 458 )
Order is already confirmed - costing variant can no longer be changed ( CO 459 )
Costing variant is not maintained - planned costs cannot be calculated ( CO 460 )
Costing variant is not maintained - no actual costs for actual activity ( CO 461 )
Order type &, plant &: Checking rule missing (see long text) ( CO 462 )
Costing variant does not exist for material valuation ( CO 465 )
Valation variant does not exist for material valuation ( CO 466 )
Error occurred during material valuation ( CO 467 )
Error occurred while creating purchase requisition for component & & ( CO 468 )
Order & is already being processed by & ( CO 469 )
Reservation &1 is already being processed by &2 ( CO 470 )
Requisition & is already being processed by & ( CO 471 )
Order type-dependent parameters are missing for order type &1 in plant &2 ( CO 490 )
Routing type does not correspond to order cat. due to routing application ( CO 492 )
Routing selection ID & is not defined (check entry) ( CO 496 )
Date not in the factory calendar (future) ( CO 500 )
Date not in the factory calendar (past) ( CO 501 )
You can no longer select new master data ( CO 506 )
Order creation terminated due to missing BOM authorization ( CO 512 )
Outline date & is after the requirements date & ( CO 531 )
Basic & is after the requirements date & ( CO 532 )
Scheduled date & is after the requirements date & ( CO 533 )
Material & is pipeline material - changes not possible ( CO 534 )
Material & is not a pipeline material - changes not possible ( CO 535 )
Planned order & has two different controlling areas ( CO 538 )
Standard production only allowed with ref. to indivual customer stock ( CO 542 )
Select the object 'operation' ( CO 543 )
Order is created using the reference plant (plant &1) ( CO 544 )
Order created with order type specified ( CO 545 )
Select a material-related order as a reference ( CO 546 )
Select an order without material as a reference ( CO 547 )
Material &1: automatic generation of inspection lot failed ( CO 548 )
Material &1 is not activated for the quality inspection! ( CO 552 )
Unit & not permitted for co-product & ( CO 553 )
Errors occurred during staging of materials (see log) ( CO 554 )
Control key &: Maintain external processing data ( CO 558 )
Minimum send-ahead qty & should not exceed operation qty & ( CO 566 )
Inspection lot & does not exist (see long text) ( CO 568 )
Maintain availability check for material & in material master (order &) ( CO 570 )
Create order network: Only internal number assignment permitted ( CO 575 )
No authorization for printing ( CO 578 )
Order &1: Master data incorrect for parallel discontinuation (Matl &2) ( CO 579 )
Required qty exceeds total qty & ( CO 582 )
Batch split deviation &% for &. Required = &, allocated = & ( CO 583 )
Batch entry/batch split not allowed for component &2 ( CO 584 )
Operation release rejected (order marked for deletion) ( CO 585 )
Operation release rejected (order completed) ( CO 586 )
Item &: Co-products cannot be deleted ( CO 587 )
Sequences in order & cannot be exchanged ( CO 591 )
Collective orders are not allowed as reference ( CO 592 )
You cannot use a collective order as a reference ( CO 608 )
Numbering not possible => operations inserted with increment of 1 ( CO 609 )
Collective order for planned order & will be converted ( CO 610 )
Satus profile & not allowed for object type & ( CO 622 )
During scheduling only the lead time is taken into account. ( CO 629 )
Distribution rule could not be created automatically ( CO 630 )
Indicator 'Functions' is not set ( CO 631 )
BOM item & deleted due to invalid item category & ( CO 635 )
Order category & not in table TCO09 (text IDs) ( CO 638 )
Please carry out (multi-level) planning run for material & first ( CO 639 )
Realistic delivery date & ? (please check) ( CO 641 )
Batches are selected for & according to & ( CO 642 )
A withdrawal has already taken place for component &. ( CO 643 )
Manufacture of co-products in collective order not permitted.(Material &) ( CO 647 )
Misssing parts information system cannot be used (start report PPCOXPR1) ( CO 648 )
All checked materials are available (look in log). ( CO 649 )
Batch determination for & without selection data ( CO 653 )
Inconsistent master data for assembly & ( CO 657 )
Characteristic values were copied - you can only display ( CO 661 )
Status of production order does not allow a change in configuration ( CO 662 )
Components have been issued for order & ( CO 663 )
Assembly order - changes have effect on sales order ( CO 665 )
Inconsistencies occurred in configuration of collective orders ( CO 669 )
Output device for order type &, plant &, MRP & not correctly maintained ( CO 672 )
Invalid unit of measure for component & (see long text) ( CO 674 )
Invalid unit of measure for component & (see long text) ( CO 675 )
You have no archiving authorization ( CO 677 )
Superior order & is technically completed ( CO 678 )
Dependent orders for assembly & are currently not being processed ( CO 681 )
Inspection lot &1 could not be read ( CO 682 )
You cannot make an assignment to make-to-order stock ( CO 684 )
Only collective requirements are possible for material & ( CO 685 )
Only individual requirements possible for material & ( CO 686 )
Unprocessed future change recs for order & prevent del. flag/completion ( CO 688 )
There must be a serial number for material & in plant & ( CO 689 )
Error record for rework exists - no change possible ( CO 696 )
The settlement rules are recreated because of manufacture of co-products ( CO 697 )
You have not selected any operations ( CO 701 )
Please enter a checking rule ( CO 702 )
Routing & group counter & seq. & op. &: Error in object characteristics ( CO 704 )
Changing Field Values of Invalid Fields using Object Characteristics ( CO 705 )
Order qty cannot be converted from &1 to &2 (unit of meas., mast. recipe) ( CO 706 )
Assembly order/network & could not be marked for deletion ( CO 707 )
Sales order cannot be changed ( CO 708 )
Order type &: Documentation of goods movements is not active ( CO 710 )
Order & has no missing parts (see long text) ( CO 711 )
Postprocessing records for order &1 prevent technical closing ( CO 718 )
MRP controller & cannot be checked because no plant has been entered ( CO 719 )
Order & has already been printed ( CO 720 )
For checking group & a check with reqmts quantities is not permitted ( CO 725 )
Messages for WM staging: Check order &1 ( CO 727 )
Check the number of serial numbers assigned ( CO 729 )
Order category & not in table TCO09 (text IDs) ( CO 735 )
Material exists without valid BOM items (see log) ( CO 740 )
WBS element & is not an account assignment object ( CO 742 )
Production orders cannot be assigned to the WBS element ( CO 743 )
Controlling area & varies from that of the WBS element ( CO 744 )
Company code & varies from that of the WBS element ( CO 745 )
Project & does not allow make-to-order stock ( CO 746 )
A purchase order with parts already exists for operation & ( CO 747 )
Serial number management is not possible for material & ( CO 749 )
Routing type & is not allowed for order type & ( CO 751 )
Control key & is not permitted ( CO 753 )
Control key & is not permitted (check entry) ( CO 754 )
Control key & does not exist ( CO 757 )
Maintain acct assgt cats./document types for creation purch. reqs. ( CO 758 )
Status of operations forbids deletion of sequence ( CO 760 )
Control key &1 does not allow ext.processing in spite of goods receipt ( CO 761 )
Control key &2 does not allow ext.processing in spite of confirmation ( CO 762 )
Selection orders without exceeding of delivery date ( CO 763 )
Quantity structure control &1 for material &2 item &3 not found ( CO 765 )
Backflush: Control key & does not allow confirmation ( CO 766 )
Backflush: Control key & should allow confirmation ( CO 767 )
Component with multi-level configuration cannot be created ( CO 773 )
No address could be determined ( CO 776 )
Routing &: Base unit of measure & and order unit & are incompatible ( CO 777 )
Material &: Consignment batch does not exist ( CO 778 )
The bill of material for component & could not be exploded ( CO 779 )
No movement type can be assigned to component & ( CO 780 )
Serial numbers can be managed only if base unit of measure is discrete ( CO 782 )
Dynpro for & & & & in table TCO36 is not defined ( CO 783 )
Production scheduler & cannot be checked because no plant was entered ( CO 784 )
Choose a valid object ( CO 785 )
Function could not be executed because (sub-)network is being processed ( CO 788 )
No delay data exists for order & ( CO 790 )
Production cost collector exists - joint production is not allowed ( CO 791 )
It does not make sense selecting sales document item without sales order ( CO 793 )
Resetting the WBS element is not allowed ( CO 794 )
WBS element is not allowed to be changed ( CO 795 )
No product cost collector could be determined for material & ( CO 796 )
No pegged requirement can be found for element &1 &2 ( CO 797 )
Enter sales order/project/WBS element or order ( CO 799 )
System error when locking object & key & ( CO 800 )
Update termination - NRFD with Table & ( CO 801 )
Update termination - DUPREC with Table & ( CO 802 )
Termin.: DELETE Tab. &: Of & records, & records have been updated ( CO 803 )
Termin.: INSERT Tab. &: Of & records, & records have been updated ( CO 804 )
Termin.: UPDATE Tab. &: Of & records, & records have been updated ( CO 805 )
No order type for routing type & plant & in Table TCK20 ( CO 808 )
No entries found in table AFVC - system error ( CO 810 )
Order type & for routing type & in plant & without order category ( CO 814 )
Planned order & is not converted (missing material availability) ( CO 816 )
Planned order & is not converted (missing available capacity) ( CO 817 )
Planned order & is not converted (missing PRT availability) ( CO 818 )
Error during availability check for order &1 (see log) ( CO 820 )
Requirements for part to be discontinued & is partly copied to successor ( CO 821 )
Reqmts for part to be discontinued & is completely copied to successor ( CO 822 )
Automatic goods receipt is planned for order & ( CO 823 )
Please select one element only ( CO 824 )
Settlement rule or product cost collector cannot be changed ( CO 828 )
No default value maintained for op. generation for order type &1 (mat &3) ( CO 831 )
The old test result is displayed ( CO 833 )
The dates for at least one order are not current ( CO 834 )
No conversion of header quantity into production unit ( CO 838 )
Internal error in order & ( CO 839 )
Collective order for order & is not completely read ( CO 840 )
Changes may only be made in leading order & ( CO 841 )
Normal reservation created for component & ( CO 842 )
Sequence &1 for order &2 cannot be deleted due to dependent operations ( CO 843 )
Units of measure for material & cannot be converted (see long text) ( CO 844 )
Unplanned insp. characteristics not permitted for sub-operations (&1/&2) ( CO 846 )
Settlement rule or product cost collector cannot be changed ( CO 847 )
External number assignment (select order number in number range (&1-&2)) ( CO 848 )
Installation of component & cannot be confirmed ( CO 850 )
Error while converting order unit of measure &1 ( CO 851 )
Change to object: & cannot be rejected ( CO 852 )
Target item does not exist ( CO 854 )
No controlling area assigned to comp. cd. & in operation & / & ( CO 856 )
Cost center & is invalid ( CO 857 )
No company code found for plant & ( CO 858 )
No controlling area found for plant & ( CO 859 )
G/L account & is invalid ( CO 860 )
Price is not defined for material & ( CO 861 )
Cost element & & is not found (check entry) ( CO 862 )
The order has no planned costs ( CO 863 )
You do not have the authorization for displaying costs ( CO 868 )
Material &: No operations exist - planned order conversion terminated ( CO 869 )
BOM cannot be read for order & ( CO 870 )
Routing cannot be read for order & ( CO 871 )
Error occurred during creation of purchase requisition for operation & ( CO 876 )
Material & was replaced by material & ( CO 877 )
Error in enhancement PPCO0008 - Inform system administration ( CO 878 )
Profile may not be changed ( CO 879 )
Availability check for order & not allowed due to status ( CO 882 )
No authorization for activity & for order type & in plant & ( CO 883 )
Periodic settlement not allowed in collective orders ( CO 884 )
No conversion log exists for planned order & ( CO 886 )
No availability check function has been selected ( CO 887 )
Characteristic value assignment for material & cannot be changed ( CO 890 )
You are not authorized to delete profile & ( CO 891 )
Ref. operation set & is not valid according to the selection conditions ( CO 892 )
External batch number assignment: Enter a batch number ( CO 894 )
No parameter variant in the referenced sales order item ( CO 896 )
Order unit of measure &1 will be changed to unit of measure &2 ( CO 897 )
Program PR1_XPRA: Error in processing table & ( CO 899 )
Program error (contact your system administrator) ( CO 901 )
Note that purchase requisition &1 &2 must be manually adjusted ( CO 911 )
Purchase order &1 &2 must be adjusted manually ( CO 912 )
Order &1 item &2 must be processed manually ( CO 913 )
Only one target cost version with alternative material costing allowed ( COA 501 )
No valid preliminary cost estimate found for product cost collector ( COA 502 )
Order &: Function not possible for collective orders ( COBAPI 009 )
More than one reason for deviation entered in layout &1 ( COCF 001 )
Objects with order status &1 will not be selected ( COCF 015 )
Objects with transaction/phase status &1 will not be selected ( COCF 016 )
No variants found for selected object type &1 ( COCF 018 )
Notification type &1 contains no screen area ( COCF 100 )
Not possible to create shift report for work center &1 ( COCF 203 )
User &1 not authorized to create a shift report ( COCF 205 )
Shift report (&1 - &2) not yet completed ( COCF 206 )
User &1 not authorized to display shift report ( COCF 209 )
User &1 not authorized to change shift report ( COCF 210 )
User &1 not authorized to discard shift report ( COCF 211 )
You can only discard the last shift report ( COCF 212 )
Document type &1 cannot be used ( COCF 216 )
Notification &1 is not a shift note ( COCF 218 )
Shift note cannot be created for work center &1 ( COCF 219 )
No input help implemented for reference object &1 ( COCF 222 )
Start date and start time set automatically ( COCF 226 )
Notification type &1 is not a shift note ( COCF 227 )
Document &1 could not be checked for changes ( COCF 228 )
Stored document &1 was subsequently changed ( COCF 229 )
User &1 has no authorization to display shift note ( COCF 230 )
User &1 has no authorization to change shift note ( COCF 231 )
It may not be possible to use shift note in shift report ( COCF 235 )
KPro: Content repository not assigned ( COCF 250 )
Internal error during creation of a document in KPro (&1) ( COCF 251 )
Internal error during loading of a document in KPro (&1) ( COCF 252 )
Internal error during full text search in KPro (&1) ( COCF 253 )
Only some of the shift reports found are displayed ( COCF 254 )
Work center &1 cannot be used ( COCF 255 )
Event allowed in current shift only (There is no active shift) ( COCF 264 )
No active shifts found ( COCF 265 )
Set the usage to "Screen Area" and save ( COCF 273 )
Attachments cannot be used (notif. type &1 does not include screen 131) ( COCF 275 )
Notification type &1 cannot be used with transaction &2 ( COCF 277 )
Selected tabs page division may lead to display errors ( COCF 278 )
Function normally not possible (Expert mode) ( COCF 279 )
No shift notes can be displayed for work center &1 ( COCF 280 )
Use of multiple classes not supported by ADS ( COCF 282 )
Text module &1 for text ID &2 is &3 characters too long ( COCF 288 )
No shift notes can be created ( COCF 291 )
The event cannot depend on the shift ( COCF 292 )
Pushbutton definition incorrect ( COCF 451 )
No group button defined ( COCF 452 )
System error when scrolling ( COCI_PP_CB 000 )
Cancelled, because inspection point processing planned for prod. order &1 ( COCI_PP_CB 007 )
No text found for characteristic &, order &, phase &, operation & ( COCI_PP_CB 210 )
No order positions exist for production order &1 ( COCI_PP_CB 342 )
Production order & does not contain any valid order items ( COCI_PP_CB 343 )
No valid order item exists for material &1 in production order &2 ( COCI_PP_CB 344 )
Production order &1 has not been created ( COCI_PP_CB 346 )
No inspection characteristics have been maintained for operation ( COCI_PP_CB 384 )
"Last Partial Lot Assignment" indicator has not been set ( COCI_PP_CB 385 )
Sequence &1 in order &2 not created ( COCI_PP_CB 520 )
Internal error when changing the status in the process order ( COCI_PP_CB 526 )
Goods receipt posting for item &1 of production order &2 ( COCI_PP_CB 536 )
Change profile & does not exist ( COCM 020 )
No change profile could be determined ( COCM 021 )
Overall profile & does not exist ( COCM 022 )
You cannot insert/delete a directly produced component ( COCM 023 )
Adding object &&& results in a conflict ( COCM 024 )
Deleting object &&& results in a conflict ( COCM 025 )
Reassign, component & & has a conflict ( COCM 026 )
The configuration of the order is not up-to-date ( COCM 030 )
There are requests for confirmations for order/collective order & ( COCM 080 )
Unprocessed conflicts from warning/error category still exist ( COCM 081 )
You cannot change the dummy indicator and simultaneously reassign it ( COCM 098 )
Insertion of phantom item is not possible ( COCM 099 )
Operation & in order & is already released ( COCM 101 )
Operation & in order & is already partially confirmed ( COCM 102 )
Operation & in order & has already been confirmed ( COCM 103 )
A purchase order already exists for component & item &. ( COCM 104 )
Goods were already removed from the warehouse for component & and item & ( COCM 105 )
Operation or suboperation &1 already exists in order &2 ( COCM 106 )
Operation &, to which the components should be reassigned,does not exist ( COCM 107 )
Change comparison is incomplete ( COCM 110 )
Preceding change process has not yet been completed ( COCM 111 )
Direct production components cannot be inserted automatically ( COCM 112 )
Direct production components cannot be deleted automatically ( COCM 113 )
The newer superior order cannot be inserted automatically ( COCM 116 )
Higher-level order cannot be entered automatically ( COCM 117 )
Higher-level operation & cannot be entered automatically ( COCM 119 )
Higher-level sequence & cannot be entered automatically ( COCM 120 )
Higher-level operation & was entered with a flag ( COCM 121 )
Higher-level sequence & was entered with a flag ( COCM 122 )
Lower-level order & cannot be deleted automatically ( COCM 123 )
Lower-level order & cannot be reassigned automatically ( COCM 124 )
Dependent order & cannot be deleted automatically ( COCM 125 )
Dependent order & cannot be reassigned automatically ( COCM 126 )
Suboperation & cannot be deleted automatically ( COCM 127 )
Component & cannot be deleted automatically ( COCM 128 )
Production resource/tool & cannot be deleted automatically ( COCM 129 )
Operation & cannot be deleted automatically ( COCM 130 )
Component & was created manually or changed ( COCM 131 )
Production resource/tool & was created manually ( COCM 132 )
Suboperation &/& was created manually ( COCM 133 )
Operation & was created or changed manually ( COCM 134 )
Sequence & was created manually ( COCM 135 )
Order & has been released ( COCM 136 )
Order & has been partially confirmed ( COCM 137 )
Order & has been confirmed ( COCM 138 )
Component &/& cannot be automatically reassigned ( COCM 139 )
Adding a co-product is not allowed ( COCM 140 )
Subsequent operation & in order & has already been released ( COCM 141 )
Subsequent operation & in order & has already been partially confirmed ( COCM 142 )
Subsequent operation & in order & has already been confirmed ( COCM 143 )
Object marked 'to be deleted' is still needed ( COCM 151 )
Object marked as 'inserted' is no longer needed ( COCM 152 )
Object marked as 'inserted' will be changed ( COCM 153 )
Component marked as 'inserted' will be reassigned ( COCM 154 )
Intended or incorrect goods movements exist for component &/& ( COCM 155 )
Addition of the plus order cannot be rejected ( COCM 158 )
Addition of the plus components cannot be rejected ( COCM 159 )
Process step &1 was revoked by user &2 ( COCM 163 )
Process step &1 was executed by user &2 ( COCM 165 )
The change process for procurement element &1 cannot be executed ( COCM 170 )
Order &1: Process for initiator &4 is not yet closed ( COCM 171 )
The change process for procurement element &1 cannot be executed ( COCM 172 )
The change process for procurement element &1 cannot be executed ( COCM 173 )
No search for proc.elements can be carried out for init.object record &1 ( COCM 176 )
&1 cannot be executed for procurement element change record &2 ( COCM 180 )
Initiating object record &1 cannot be deleted ( COCM 182 )
Neither plan.nor purch. orders for change numbers are being searched for ( COCM 183 )
Initiating object record & cannot be deleted ( COCM 189 )
Procurement element change record &1 cannot be deleted ( COCM 190 )
Order &1 is already being processed in another change process ( COCM 191 )
No simulation order is created if the reason is & ( COCM 192 )
No processing steps were selected for execution ( COCM 195 )
Process steps for procurement element change record & cannot be reversed ( COCM 196 )
No processing steps to be undone were selected ( COCM 197 )
List entry for initiating object record &1 has been updated ( COCM 198 )
Initiating object record &1 has been locked by user &2 ( COCM 199 )
Dependent order &1 is already being processed in another process ( COCM 200 )
No procuremnt elements found for sales order &1, direct assignment &2 ( COCM 202 )
Primary and secondary objects have different material numbers ( COCM 216 )
The comparison objects have different quantities ( COCM 219 )
Inconsistent state due to move. See long text ( COCM 226 )
The network configuration is not up-to-date ( COCMN 030 )
Activity & in network & has been released ( COCMN 101 )
Activity & in network & has been partially confirmed ( COCMN 102 )
Activity & in network & has been confirmed ( COCMN 103 )
Activity or activity element & already exists in network & ( COCMN 106 )
Activity &, to which the components should be reallocated, does not exist ( COCMN 107 )
The preceding change comparison is not yet completed ( COCMN 111 )
Conflicts occurred during the change comparison for network & ( COCMN 112 )
Superior operation & is marked for deletion ( COCMN 118 )
Higher-level operation cannot be entered automatically ( COCMN 119 )
Activity element & cannot be deleted automatically ( COCMN 127 )
Component & cannot be deleted automatically ( COCMN 128 )
Production resource/tool & cannot be deleted automatically ( COCMN 129 )
Activity & cannot be deleted automatically ( COCMN 130 )
Activity element & was created manually ( COCMN 133 )
Activity & was created manually ( COCMN 134 )
Network & has already been released ( COCMN 136 )
Network & is already partially confirmed ( COCMN 137 )
Network & is already confirmed ( COCMN 138 )
Component & cannot be automatically reallocated ( COCMN 139 )
Only the standard transaction is possible in a global system ( COCORE 000 )
This planning is not possible in an exclusively HR system ( COCORE 004 )
You are not in the logical system for master data maintenance ( COCORE 080 )
This is not the logical system of controlling area & ( COCORE 081 )
Controlling area & does not exist ( COCORE 101 )
Control indicators for controlling area & do not exist ( COCORE 102 )
No company code was selected ( COCORE 104 )
No company code assigned to controlling area & ( COCORE 105 )
Assign a controlling area to company code & ( COCORE 200 )
Company code & is not assigned to controlling area & ( COCORE 203 )
Cost accounting is not active in company code & ( COCORE 205 )
Company code &1 does not exist ( COCORE 206 )
Invalid CO area determination for company code & ( COCORE 207 )
Selection via groups is only allowed in the cost accounting system ( COCORE 221 )
Do not use a controlling area with company code & ( COCORE 259 )
No controlling areas exist ( COCORE 602 )
Exception in SLD Client ( CODEGEN 002 )
Select a node ( COIB 000 )
Select one node only in the assignment area ( COIB 001 )
As-built configuration(s) &1 has/have been saved ( COIB 002 )
Enter order number or material and serial number ( COIB 003 )
Enter a material number and a serial number ( COIB 004 )
Component & has already been assigned ( COIB 010 )
Entry & already exists ( COIB 011 )
First set the check indicators ( COINT_ERR 005 )
Automatic check not possible ( COINT_ERR 006 )
Firstly a report must be assigned ( COINT_ERR 010 )
Automatic check possible ( COINT_ERR 014 )
Object is not recognized in Accounting ( COINT_ERR 015 )
The cockpit cannot be initialized for object &2/&3 ( COINT_ERR 023 )
None of the selectable lists allow the selection of planned orders ( COIS 000 )
Enter either a profile or a layout ( COIS 005 )
Trace message (&1) during background processing: &2 &3 &4 ( COIS 009 )
Called method not implemented ( COIS 010 )
Parallel processing not active (server group &1) ( COIS 012 )
A variant from another transaction (&2) was selected ( COIS 016 )
There is no data for the selection ( COIS 024 )
One or more field texts reset ( COIS 035 )
Specified class cannot be used ( COIS 036 )
Specified structure not in Data Dictionary ( COIS 037 )
Specified table type not in Data Dictionary ( COIS 038 )
Function &1 not intended for list type &2 and order category &3 ( COIS 041 )
List type &1 not intended for order category &2 ( COIS 042 )
Scrap type: No reporting point and/or no scrap quantity entered ( COIS 049 )
Enter at least one selection criterion ( COIS 053 )
Conversion of variants for PPIO_ENTRY: &1 successful, &2 with errors ( COIS 899 )
Value &1 for Attribute &2 cannot be converted from the ISO Format ( COMXIF_IOEH 003 )
Value &1 for Attribute &2 is not in SAP Internal Format ( COMXIF_IOEH 004 )
Field name &1 not found in working set ( COM_ACCOUNTING 000 )
Input value &1 does not exist; specify a permitted value ( COM_ACCOUNTING 001 )
Set up of condition technique for acct determination is incorrect &1 &2 ( COM_ACCOUNT_DETERM 000 )
Condition record for account determination could not be read &1 &2 &3 ( COM_ACCOUNT_DETERM 001 )
No condition type is maintained for application &1 ( COM_ACCOUNT_DETERM 002 )
Condition type &1 is not maintained for application &2 ( COM_ACCOUNT_DETERM 003 )
No accesses are maintained for application &1 ( COM_ACCOUNT_DETERM 004 )
No accesses are defined for condition types in application &1 ( COM_ACCOUNT_DETERM 005 )
Error in control processing. Objects of class &1 were not generated ( COM_ACCOUNT_DETERM 007 )
Inconsistent data in control ( COM_ACCOUNT_DETERM 008 )
Error occurred when calling method &1 of the tree model ( COM_ACCOUNT_DETERM 009 )
Error calling method &1 of class &2 ( COM_ACCOUNT_DETERM 010 )
Inconsistent data in function code &1 ( COM_ACCOUNT_DETERM 011 )
Function module &1& not called correctly ( COM_ACCOUNT_DETERM 014 )
No data determined for pricing procedure &2 (application &1) ( COM_ACCOUNT_DETERM 015 )
No condition type determined for step &3 in pricing procedure &2 ( COM_ACCOUNT_DETERM 016 )
No condition record determined for ID &1 (symbolic account key) ( COM_ACCOUNT_DETERM 017 )
Field name &1 not found in working set ( COM_ACCOUNT_DETERM 018 )
ID of condition record is initial (symbolic account key) ( COM_ACCOUNT_DETERM 019 )
Symbolic account key &1 determined (&2) ( COM_ACCOUNT_DETERM 020 )
Symbolic account key &1 and &2 determined (&3) ( COM_ACCOUNT_DETERM 021 )
ID type &1 is unique and ID &2 is already being used in product &3 ( COM_ALTER_IDENT 000 )
No generation possible for ID type & ( COM_ALTER_IDENT 010 )
Data of alternative ID type was adjusted ( COM_ALTER_IDENT 020 )
Function group &1 is already locked in request &2 ( COM_ALTER_IDENT 021 )
No alternative ID type has been assigned to the product ( COM_ALTER_IDENT 023 )
No profile assigned for the PC-UI screen structure & ( COM_ALTER_IDENT 024 )
Class & already exists ( COM_ALTER_IDENT 026 )
ID type subsequently identified as "Unique" ( COM_ALTER_IDENT 035 )
Automatic generation is not possible ( COM_ALTER_IDENT 201 )
Automatic generation is not possible for data type &1 ( COM_ALTER_IDENT 205 )
Intervals overlap ( COM_ATTRFRG_GEN 001 )
Value &1 exists twice or the intervals overlap ( COM_ATTRFRG_GEN 002 )
Single value &1 is contained in one of the previous intervals (&2 - &3) ( COM_ATTRFRG_GEN 003 )
Objects in customer namespace must begin with Y or Z ( COM_ATTRFRG_GEN 015 )
Object name & is in the customer namespace ( COM_ATTRFRG_GEN 016 )
An attribute is not active; contact your system administrator ( COM_ATTRFRG_GEN 020 )
A serious error has occurred; contact SAP ( COM_ATTRFRG_GEN 022 )
Set type & already exists or not fully defined ( COM_ATTRFRG_GEN 023 )
Attribute & is not active; contact your system administrator ( COM_ATTRFRG_GEN 027 )
Single values and intervals are not allowed with this data type ( COM_ATTRFRG_GEN 029 )
Enter a shorter value ( COM_ATTRFRG_GEN 030 )
Attribute &1 already exists in set type &2 ( COM_ATTRFRG_GEN 032 )
Attribute & can only be partly changed; already being used in set types ( COM_ATTRFRG_GEN 036 )
Set type & cannot be deleted; it is already assigned to an object ( COM_ATTRFRG_GEN 039 )
Set type & can only be partly changed; already assigned to an object ( COM_ATTRFRG_GEN 040 )
Set type table & still contains data and cannot be deleted ( COM_ATTRFRG_GEN 045 )
Set type & is not active in the database ( COM_ATTRFRG_GEN 047 )
Administrative data of attribute & could not be deleted ( COM_ATTRFRG_GEN 048 )
Description of attribute & could not be deleted ( COM_ATTRFRG_GEN 049 )
An object with the same name already exists for attribute & ( COM_ATTRFRG_GEN 050 )
Lower limit of interval (&1 - &2) is greater than or equal to upper limit ( COM_ATTRFRG_GEN 061 )
Property cannot be changed as attribute is already used in set types ( COM_ATTRFRG_GEN 062 )
Template for generating set type objects missing ( COM_ATTRFRG_GEN 069 )
An object with the same name already exists for set type & ( COM_ATTRFRG_GEN 073 )
You have assigned too many attributes to the set type & ( COM_ATTRFRG_GEN 074 )
Attribute & is not defined as a multiple-value attribute ( COM_ATTRFRG_GEN 078 )
No attributes found for set type & ( COM_ATTRFRG_GEN 079 )
Number of decimal places (&1) exceeds attribute length &2 ( COM_ATTRFRG_GEN 081 )
Attribute & predefined by SAP; change with caution ( COM_ATTRFRG_GEN 083 )
You are not authorized to change the SAP attribute & ( COM_ATTRFRG_GEN 084 )
Maximum number of set types has been reached ( COM_ATTRFRG_GEN 088 )
Internal error when creating set type screen ( COM_ATTRFRG_GEN 103 )
Error when writing set type information ( COM_ATTRFRG_GEN 104 )
Error when deleting set type information ( COM_ATTRFRG_GEN 105 )
Not enough space available on the screen ( COM_ATTRFRG_GEN 107 )
Specified value table & does not have a suitable key field ( COM_ATTRFRG_GEN 113 )
Data type of key field of table & is not suitable ( COM_ATTRFRG_GEN 114 )
Set type cannot be assigned an object family ( COM_ATTRFRG_GEN 116 )
Field name contains blanks or non-alphanumeric characters ( COM_ATTRFRG_GEN 117 )
Set type &1 predefined by SAP; change with caution ( COM_ATTRFRG_GEN 120 )
You are not authorized to change SAP set type &1 ( COM_ATTRFRG_GEN 121 )
You are not authorized to delete SAP set type &1 ( COM_ATTRFRG_GEN 122 )
You are not authorized to delete SAP attribute & ( COM_ATTRFRG_GEN 123 )
Attribute &1 has data type &2; cannot be used in configuration ( COM_ATTRFRG_GEN 124 )
Set type &1 cannot be displayed ( COM_ATTRFRG_GEN 125 )
Regenerate set type ( COM_ATTRFRG_GEN 127 )
Key attributes must be at the beginning ( COM_ATTRFRG_GEN 128 )
Decimal places are adjusted to &1 and the output length is adjusted to &2 ( COM_ATTRFRG_GEN 129 )
A set type must contain at least one data field ( COM_ATTRFRG_GEN 133 )
Invalid data type for key field (Example: Checkbox, Quantity, Amount ...) ( COM_ATTRFRG_GEN 134 )
Single value or value of lower limit cut off ( COM_ATTRFRG_GEN 135 )
Value of upper limit cut off ( COM_ATTRFRG_GEN 136 )
Set type &1 is already being used in client &2 ( COM_ATTRFRG_GEN 138 )
Set type cannot be edited with transaction COMM_ATTRSET ( COM_ATTRFRG_GEN 141 )
'Multiple Values' and "Field Is Key" exclude each other ( COM_ATTRFRG_GEN 144 )
Set type cannot be maintained with this transaction (CRMC_PPR_ATTRSET) ( COM_ATTRFRG_GEN 146 )
Select a line to enter a language-dependent short text ( COM_ATTRFRG_GEN 148 )
Fixed value/limit for data type & must be a positive integer ( COM_ATTRFRG_GEN 151 )
Attribute lengths corrected to maximum value for multi-value attributes ( COM_ATTRFRG_GEN 157 )
Fixed values converted to uppercase ( COM_ATTRFRG_GEN 161 )
Objects in different packages ( COM_ATTRFRG_GEN 162 )
Internal error in &1 ( COM_ATTRFRG_GEN 179 )
Attribute &1 cannot be assigned ( COM_ATTRFRG_GEN 181 )
& is a reserved word; choose another field name ( COM_ATTRFRG_GEN 184 )
Key fields of set type can only be & characters long ( COM_ATTRFRG_GEN 187 )
Multiple use and "distribution-chain-dependent' are mutually exclusive ( COM_ATTRFRG_GEN 188 )
Multi-value integer-attributes with fixed values are restricted in length ( COM_ATTRFRG_GEN 190 )
Attribute short text is longer than 20 characters ( COM_ATTRFRG_GEN 192 )
Data type is limited to a maximum 255 characters ( COM_ATTRFRG_GEN 195 )
Attribute &1 not suitable as key field due to attribute type ( COM_ATTRFRG_GEN 217 )
Data type permits a maximum length of 75 characters for PC-UI ( COM_ATTRFRG_GEN 227 )
Note the restrictions for downloading bills of material ( COM_BOM_EXCHANGE 000 )
Cannot download bills of material for multiple plants ( COM_BOM_EXCHANGE 002 )
Note the restrictions for downloading with adapter object BOM_ERP ( COM_BOM_EXCHANGE 010 )
Change your filter settings for the BOM_ERP adapter object ( COM_BOM_EXCHANGE 011 )
Parent objects have not been downloaded ( COM_BOM_EXCHANGE 012 )
Numeric equality cannot be guaranteed (partner &1) ( COM_BUPA 030 )
Select an address ( COM_BUPA_BSP 000 )
Tax jurisdiction code determined ( COM_BUPA_BSP 001 )
There are possible duplicates ( COM_BUPA_BSP 002 )
Address was not created/changed ( COM_BUPA_BSP 003 )
Master records already exist with this data ( COM_BUPA_BSP 007 )
You cannot manually remove the indicator for the standard card ( COM_BUPA_BSP 016 )
Your search was not selective enough; restrict the search criteria ( COM_BUPA_BSP 017 )
No business partner found; see long text for entry rules ( COM_BUPA_BSP 021 )
No products can be assigned to category &1 ( COM_CATEGORY 015 )
Categories are from different hierarchies ( COM_CATEGORY 019 )
Category &1 can only be changed in the original system &2 ( COM_CATEGORY 026 )
Higher-level category of category &1 contains errors ( COM_CATEGORY 029 )
There are products / individual objects for category &1 ( COM_CATEGORY 047 )
Category &1 does not belong to the base hierarchy for this product type ( COM_CATEGORY 052 )
Error when converting category descriptions to table COMM_CATEGORYT ( COM_CATEGORY 705 )
Duplicate cleansing case &1 already exists ( COM_CLEAR 000 )
Key of the duplicate cleansing case has not been transfered ( COM_CLEAR 001 )
Duplicate cleansing case &1 does not exist ( COM_CLEAR 002 )
Internal error, ID &1 ( COM_CLEAR 005 )
Error during number assignment ( COM_CLEAR 006 )
Invalid Object Class &1 ( COM_CLEAR 007 )
Target object number &1 has been deleted because it has no key ( COM_CLEAR 008 )
Duplicate cleansing not active for &1 &2 &3 ( COM_CLEAR 009 )
Duplicate cleansing: Error in job scheduling ( COM_CLEAR 011 )
There are no duplicate cleansing cases for object &1 ( COM_CLEAR 013 )
There is no detailed information for this object ( COM_CLEAR 014 )
Termination occurred during updating of dependent objects in DB table ( COM_CLEAR 020 )
Target object &1 does not exist ( COM_CLEAR 021 )
Target object list is empty ( COM_CLEAR 022 )
Enter valid single value or '*' ( COM_CLEAR 023 )
Duplicate cleansing case &2 for application object &1 already exists ( COM_CLEAR 025 )
Object Cannot Be Reassigned ( COM_CLEAR 026 )
Do not mark all objects for deletion! ( COM_CLEAR 027 )
Assign the object to an appropriate folder ( COM_CLEAR 032 )
Object was not inserted as it has already been deleted ( COM_CLEAR 034 )
Invalid category &1 in data cleansing case &2 ( COM_CLEAR 035 )
Object &1 must not be changed ( COM_CLEAR 038 )
Class &1 object must not be copied ( COM_CLEAR 039 )
Detailed comparison not possible between different object types ( COM_CLEAR 043 )
Unknown product type &1 ( COM_CUIB1 020 )
Generation not possible, Customizing missing ( COM_DIFF_BSP 012 )
Generation not possible; Inconsistency in Link Handler ( COM_DIFF_BSP 016 )
Generation not possible ( COM_DIFF_BSP 017 )
Generation not possible ( COM_DIFF_BSP 018 )
Generation not possible; Screen structure does not exist ( COM_DIFF_BSP 019 )
Generation not possible ( COM_DIFF_BSP 020 )
Generation not possible; Customizing missing ( COM_DIFF_BSP 021 )
Generation not possible; Customizing missing ( COM_DIFF_BSP 023 )
Generation not possible; Product type does not exist ( COM_DIFF_BSP 024 )
No authorization to maintain object types ( COM_DML_CUST 115 )
No authorization to transport object types ( COM_DML_CUST 116 )
When you create a version, you must specify the base object ( COM_DML_ENGINE 009 )
Object type & only allows a strict hierarchy ( COM_DML_ENGINE 013 )
Hierarchy must be cycle-free ( COM_DML_ENGINE 034 )
Objects of owner & cannot be processed in this system ( COM_DML_ENGINE 081 )
Do not change independent subobjects using superior object ( COM_DML_ENGINE 123 )
An inactive state (user &) is already being processed ( COM_DML_ENGINE 188 )
A record with the same logical key already exists ( COM_EVENTHISTORY 004 )
Unable to read program &1 ( COM_GENERATOR 101 )
'&1' is not a valid function module name ( COM_GENERATOR 103 )
Internal error in function module '&1' ( COM_GENERATOR 104 )
Unable to activate table &1 ( COM_GENERATOR 106 )
Table &1 was activated, but warnings were issued (see activation log) ( COM_GENERATOR 107 )
Error occurred when activating table &1 (see activation log) ( COM_GENERATOR 108 )
Index &1 of table &2 was activated but warnings were issued (see log) ( COM_GENERATOR 110 )
Error occurred when activating index &1 of table &2 (see activation log) ( COM_GENERATOR 111 )
Unable to activate structure &1 ( COM_GENERATOR 113 )
Structure &1 was activated, but warnings were issued (see activation log) ( COM_GENERATOR 114 )
Errors occurred when activating structure &1 (see activation log) ( COM_GENERATOR 115 )
Error occurred when calling &1 to create a table type for structure &2 ( COM_GENERATOR 116 )
Unable to activate table type &1 ( COM_GENERATOR 119 )
Table type &1 was activated but warnings were issued (see activation log) ( COM_GENERATOR 120 )
Errors occurred when activating table type &1 (see activation log) ( COM_GENERATOR 121 )
Internal error in &1 for development class &2 ( COM_GENERATOR 122 )
Error occurred when calling &1 with function group &2 ( COM_GENERATOR 123 )
Unable to generate Include &1 in function group &2 ( COM_GENERATOR 127 )
Unable to generate main program for &1 ( COM_GENERATOR 129 )
Unable to copy (all) documentation for report &1 ( COM_GENERATOR 131 )
Unable to activate lock object &1 ( COM_GENERATOR 133 )
Lock object &1 was activated but warnings were issued -see activation log ( COM_GENERATOR 134 )
Errors occurred when activating lock object &1 (see activation log) ( COM_GENERATOR 135 )
Error occurred when splitting name of function group &1 ( COM_GENERATOR 136 )
Namespace of function module &1 different than that of function group ( COM_GENERATOR 137 )
Unable to write program &1 ( COM_GENERATOR 138 )
Check transport before inserting in TADIR ( COM_GENERATOR 144 )
Description of table type or row type entry is missing ( COM_GENERATOR 145 )
Syntax error - generation command "&1" unknown ( COM_GENERATOR 203 )
Syntax error - option for command &1 not finished off correctly ( COM_GENERATOR 206 )
Syntax error - argument for command &1 not finished off correctly ( COM_GENERATOR 207 )
Placeholder '&1' not specified in replacement table ( COM_GENERATOR 210 )
Syntax error - placeholder does not end with '%' ( COM_GENERATOR 211 )
Unable to perform line break in program code ( COM_GENERATOR 212 )
The argument for generation command &1 is too long ( COM_GENERATOR 214 )
The function &1 does not exist ( COM_GENERATOR 215 )
A blank placeholder is not allowed ( COM_GENERATOR 216 )
Syntax error - a placeholder must not contain any special characters ( COM_GENERATOR 218 )
Syntax error - arguments for command &1 are invalid ( COM_GENERATOR 219 )
Syntax error - the option for command &1 contains special characters ( COM_GENERATOR 220 )
Syntax error - the argument for command &1 contains special characters ( COM_GENERATOR 221 )
Syntax error - placeholder too long ( COM_GENERATOR 222 )
The option for generation command &1 is too long ( COM_GENERATOR 223 )
Generation command &1 is not designed to process arguments ( COM_GENERATOR 224 )
Pretty Printer error ( COM_GENERATOR 225 )
Class &1 does not exist ( COM_GENERATOR 226 )
Class &1 does not implement interface &2 ( COM_GENERATOR 227 )
Error during instantiation of class &1 ( COM_GENERATOR 228 )
Error calling up method &2 of class &1 ( COM_GENERATOR 229 )
Unable to read template &1 ( COM_GENERATOR 304 )
Non-generated (modified) objects found ( COM_GENERIC_BW_OLTP 003 )
Messages with errors when inserting into generation log ( COM_GEN_FRAME 807 )
Messages that could not be inserted into the generation log ( COM_GEN_FRAME 808 )
Impermissible character in ID '&1' of the generation log ( COM_GEN_FRAME 810 )
Generation log has not been created because of consistency problems ( COM_GEN_FRAME 811 )
Generation log was not saved ( COM_GEN_FRAME 812 )
The generation log does not contain any messages ( COM_GEN_FRAME 818 )
Hierarchy &1 may only be changed in the original system &2 ( COM_HIERARCHY 008 )
Assign a hierarchy to application &1 ( COM_HIERARCHY 016 )
Entry missing in COMS_HIER_R3IMP (Note &1) ( COM_HIERARCHY 032 )
Hierarchy &1 is used for application &2 and &3 (Note &4) ( COM_HIERARCHY 033 )
Trans. 'Assign Category Hierarchies to Applications' is locked by user &1 ( COM_HIERARCHY 103 )
Application &1 cannot be assigned manually ( COM_HIERARCHY 105 )
Hierarchies still assigned to standard schema '&1' ( COM_HIERCUST 101 )
Error while writing data to table & ( COM_HIERCUST 854 )
Table &1 in client &2 contains several numbering schemes with the same ID ( COM_HIERCUST 856 )
Relationship cannot be created because relationship type not reversible ( COM_IL 002 )
A relationship with the same source already exists ( COM_IL 003 )
A relationship with the same destination already exists ( COM_IL 004 )
Another relationship with the same source is not possible ( COM_IL 005 )
Another relationship with the same destination is not possible ( COM_IL 006 )
Relationship type & does not allow opposite relationships ( COM_IL 012 )
Relationship type & does not allow an object to be assigned to itself ( COM_IL 013 )
Inconsistencies/errors in parameters when calling a programming unit ( COM_IL 101 )
Relationship-type name not unique; choose another name ( COM_IL_GEN 055 )
Enter another source-object type / target-object type combination ( COM_IL_GEN 060 )
BAdI: Implementation for checking the validity of a relationship ( COM_IL_GEN 101 )
PC-UI: Assignment of the relationship type to a tab page ( COM_IL_GEN 102 )
PC-UI: Assignment of a relationship type to an application ( COM_IL_GEN 103 )
PC-UI: Assignment of a relationship type to an application set ( COM_IL_GEN 104 )
PC-UI: Change or addition to field group entries ( COM_IL_GEN 105 )
PC-UI: Layout generation ( COM_IL_GEN 106 )
PC-UI: Adjustment of class for controlling the user interface ( COM_IL_GEN 107 )
SAP GUI: Adjustment of class for controlling the user interface ( COM_IL_GEN 108 )
Maintain Customizing settings for locations for current object family ( COM_IOBJ_LOCAT 002 )
Business partner address not found in partner function & ( COM_IOBJ_LOCAT 005 )
Geolocation data cannot be calculated automatically ( COM_IOBJ_LOCAT 006 )
Displayed business partner address is not the standard address ( COM_IOBJ_LOCAT 007 )
Enter values within the range permitted for geolocation data ( COM_IOBJ_LOCAT 009 )
No knowledge base could be found &1 &2 &3 &4 ( COM_IPC_API_CONFIG 000 )
Error creating configuration for product &1 ( COM_IPC_API_CONFIG 001 )
IPC: User parameter (&) is no longer valid ( COM_IPC_UI 008 )
Enter an admissible value for the share ( COM_IPM_IL 006 )
Enter an admissible value for the share ( COM_IPM_IL 007 )
Enter an admissible value for the share ( COM_IPM_IL 008 )
IP edited is not a title grouping ( COM_IPM_IL 009 )
Relationship of 'title grouping' type with IP & is not possible ( COM_IPM_IL 010 )
Shares add up to a total of over 100% ( COM_IPM_IL 011 )
Relationship of this type is not admissible for title grouping &1 ( COM_IPM_IL 012 )
Title level of IP &2 is lower than or the same as the level of current IP ( COM_IPM_IL 017 )
Relationship with underlying title rel.lower than higher-level exists ( COM_IPM_IL 018 )
IP &1 is already assigned to a superordinate title ( COM_IPM_IL 020 )
IP &1 linked as Underlying Component is set up for Rights Owned (Gr.Ref.) ( COM_IPM_IL 021 )
IP &1 linked as Underlying Component (Gr.Ref.) is set up for Rights Owned ( COM_IPM_IL 022 )
No assignment for Underlying Component is allowed ( COM_IPM_IL 024 )
IP &1 and &2 have circular title relationship ( COM_IPM_IL 028 )
Missing parameter &1 when calling &2 ( COM_LINK_PARTNER 001 )
Table &1 does not contain an entry for &2 ( COM_LINK_PARTNER 002 )
No data found for &1 ( COM_LINK_PARTNER 003 )
Internal error in &1 ( COM_LINK_PARTNER 004 )
No partner schema maintained for category &1 of product or ind. object ( COM_LINK_PARTNER 005 )
Illegal value &1 for parameter &2 ( COM_LINK_PARTNER 006 )
Illegal value for parameters when calling &1 ( COM_LINK_PARTNER 007 )
Technical key of source is missing ( COM_LINK_PARTNER 101 )
Technical key of partner is missing ( COM_LINK_PARTNER 102 )
Illegal value &1 for indicator 'main partner' ( COM_LINK_PARTNER 104 )
Start date is missing ( COM_LINK_PARTNER 105 )
End date is missing ( COM_LINK_PARTNER 106 )
Start date &1 is greater than end date &2 ( COM_LINK_PARTNER 107 )
Partner function is missing ( COM_LINK_PARTNER 108 )
Numerator occurs without denominator ( COM_LINK_PARTNER 109 )
Partner function &1 occurs less often than specified in Customizing ( COM_LINK_PARTNER 110 )
Partner function &1 occurs more often than specified in Customizing ( COM_LINK_PARTNER 111 )
Combination of partner and function occurs more than once ( COM_LINK_PARTNER 112 )
Illegal value for field &1 ( COM_LINK_PARTNER 113 )
The reference number for the Nota Fiscal has more than one dash ( COM_LOC_BR 001 )
Error in updating object &1 ( COM_PARTNER 002 )
Corresponding partner function for function category &1 missing! ( COM_PARTNER 005 )
Circle reference for partner function &1 (access sequence &2, access &3) ( COM_PARTNER 010 )
Only partner functions for scenario displayed ( COM_PARTNER 011 )
Maintain competitor product ID to maintain other comp. product details ( COM_PARTNER 038 )
No changes possible without entering a partner det. procedure ( COM_PARTNER 102 )
No more changes can be made to address field (&1) ( COM_PARTNER 103 )
Partner determination procedure &1 not found ( COM_PARTNER 112 )
Partner function with internal identification &1 does not exist ( COM_PARTNER 114 )
Partner function &1 is not allowed at this point ( COM_PARTNER 115 )
Attribute &1 (&2) is not available for partner function &3 ( COM_PARTNER 118 )
No sales data can be determined for partner &1 (&2) ( COM_PARTNER 121 )
No pricing data could be determined for partner &1 (&2) ( COM_PARTNER 122 )
No shipping data could be determined for partner &1 (&2) ( COM_PARTNER 123 )
No classification data could be determined for partner &1 (&2) ( COM_PARTNER 124 )
No sales tax data could be determined for partner &1 (&2) ( COM_PARTNER 125 )
Changes to address of type &1 not possible ( COM_PARTNER 134 )
Partner &1 (&2) is not an employee ( COM_PARTNER 135 )
Partner &1 (&2) is neither an employee nor an organizational unit ( COM_PARTNER 136 )
Partner &1 (&2) is not a competitor ( COM_PARTNER 137 )
Partner &1 (&2) is not a bidder ( COM_PARTNER 138 )
Partner &1 (&2) is not a vendor ( COM_PARTNER 139 )
No partner determination procedure determined for item category &1 ( COM_PARTNER 140 )
No partner determination procedure determined for business trans. &1 ( COM_PARTNER 141 )
Partner &1 may not be used in partner function &2 ( COM_PARTNER 142 )
Partner &1 (&2) is not a portal provider ( COM_PARTNER 143 )
Partner &1 (&2) is not clear (remove an entry) ( COM_PARTNER 144 )
&1 &2 (&3) is not a business partner ( COM_PARTNER 145 )
You may not use the private address of &1 (&2) ( COM_PARTNER 146 )
&1 (&2) is not specified ( COM_PARTNER 147 )
Partner function &4 is designed for &1 (&2 &3) ( COM_PARTNER 148 )
Partner determination was interrupted by an incorrect partner ( COM_PARTNER 149 )
Enter mandatory partner ( COM_PARTNER 151 )
Partner function &1 may not be used in this document ( COM_PARTNER 155 )
Partner &1 (&2) is marked for deletion ( COM_PARTNER 156 )
Use the business partner &3 as a successor to &2 &1 ( COM_PARTNER 157 )
Group hierarchies (&1) may not be used as &2 ( COM_PARTNER 168 )
Only group hierarchies can be used as &2 ( COM_PARTNER 169 )
Partner Attribute &1 DOes Not Exist ( COM_PARTNER 172 )
Attribute &1 is not assigned to attribute group &2 ( COM_PARTNER 175 )
No partner function for category &1 in determination procedure &2 defined ( COM_PARTNER 178 )
Competitor product &1 already assigned to competitor &2 ( COM_PARTNER 184 )
Errors when processing address ( COM_PARTNER 265 )
Contradictory requirements w/ ref.to mandatory funct. &3 (obj. &1 and &2) ( COM_PARTNER 551 )
Contradictory requirements w/ ref. to occurrence &3 (object &1 and &2) ( COM_PARTNER 552 )
There are no inconsistencies according to the check. ( COM_PARTNER 554 )
It was not possible to check partner determ. procedure &1 for deadlocks. ( COM_PARTNER 555 )
Partner function &1 must not be used for object &2. ( COM_PARTNER 556 )
Partner function &1 is not defined correctly. ( COM_PARTNER 557 )
A partner function of function category &1 is mandatory in object &2 ( COM_PARTNER 558 )
Only one partner function of function category &1 is allowed ( COM_PARTNER 559 )
Partner function &3 must occur &4 times in object &2 ( COM_PARTNER 560 )
Partner function &3 must only occur &4 times at maximum in object &2 ( COM_PARTNER 561 )
Partner function &3 must occur exactly &4 times in object &2 ( COM_PARTNER 562 )
Changeability of partner function &1 is not as required. ( COM_PARTNER 563 )
Changeability of address of partner function &1 is not correct. ( COM_PARTNER 564 )
Calendar maintenance for partner function &1 is not as recommended ( COM_PARTNER 565 )
For usage in object &2 a partner function of category &1 is recommended. ( COM_PARTNER 566 )
Identification / short text entered already exists ( COM_PARTNER 800 )
Not all source parameters permitted for this source ( COM_PARTNER 802 )
For this source, the function type "contact person" must be used. ( COM_PARTNER 809 )
Multiple mapping to partner function (&1) can lead to problems ( COM_PARTNER 813 )
Relationship type does not fit the partner function category ( COM_PARTNER 815 )
Automatic partner determination using access sequence '&1' ( COM_PARTNER_BAL 022 )
Access &1 executed (&3) ( COM_PARTNER_BAL 030 )
Identification / short text entered already exists ( COM_PARTNER_MD 800 )
Relationship type does not fit the partner function category ( COM_PARTNER_MD 815 )
RFC error - RFC text: &1&2&3&4 ( COM_PAYCARD_AUTH 020 )
Error when determining setting for card type ( COM_PAYCARD_AUTH 121 )
Determination of open values not successful. ( COM_PAYCARD_AUTH 122 )
Error when determining setting of checking group &1. ( COM_PAYCARD_AUTH 128 )
Transaction data not complete. Authorization not possible. ( COM_PAYCARD_AUTH 131 )
No line to be authorized ( COM_PAYCARD_AUTH 132 )
Cannot delete original line with card number &1 ( COM_PAYPLAN 330 )
Date category &1 for payment plan type &2 does not exist ( COM_PAYPLAN 403 )
Customer payment guarantee procedure & does not exist ( COM_PAYPLAN 405 )
Card type & does not exist ( COM_PAYPLAN 407 )
Card type &1 with selection condition &2 does not exist ( COM_PAYPLAN 409 )
Card type & does not exist ( COM_PAYPLAN 410 )
Organizational unit &1 with card type &2 does not exist ( COM_PAYPLAN 412 )
Merchant identification does not exist at clearing house & ( COM_PAYPLAN 413 )
Checking group for authorization & does not exist ( COM_PAYPLAN 415 )
Blocking reason & does not exist ( COM_PAYPLAN 417 )
Checking results of &1 and &2 do not exist ( COM_PAYPLAN 419 )
Limit all payment cards except one ( COM_PAYPLAN_CHECK_OA 005 )
When payment method payment card is selected, enter card data ( COM_PAYPLAN_CHECK_PC 004 )
For OrgUnit &1 and card &2, no merchant ID could be determined ( COM_PAYPLAN_CHECK_PC 008 )
This payment method is not supported; choose another payment method ( COM_PAYPLAN_CHECK_PC 009 )
If you do not specify the CVV for card &1 &2, set CVV state accordingly ( COM_PAYPLAN_CHECK_PC 011 )
Payment card data differ from data from business agreement ( COM_PAYPLAN_CHECK_PC 020 )
Document type '&' is not permitted ( COM_PCAT_CUSTOMIZING 001 )
Global Customizing for the product order number has not been done ( COM_PCAT_CUSTOMIZING 002 )
Enter the requested format of the product order number ( COM_PCAT_CUSTOMIZING 003 )
Format &1 is not permitted ( COM_PCAT_CUSTOMIZING 004 )
Separator is a mandatory field that is dependent on global Customizing ( COM_PCAT_CUSTOMIZING 005 )
Separator cannot be alphanumeric ( COM_PCAT_CUSTOMIZING 006 )
Parameter cannot be used in connection with the format &1 ( COM_PCAT_CUSTOMIZING 007 )
Specify a catalog ( COM_PCAT_D 101 )
Product catalog & does not exist ( COM_PCAT_D 102 )
Description not found in language & ( COM_PCAT_D 103 )
User & is already processing the header data of catalog & ( COM_PCAT_D 106 )
Enter a variant ( COM_PCAT_D 201 )
Product catalog variant & & does not exist ( COM_PCAT_D 202 )
Price information '&1' '&2' for the variant '&3' is not available ( COM_PCAT_D 203 )
Price information with GUID & does not exist ( COM_PCAT_D 204 )
User &1 is already processing catalog variant &2 ( COM_PCAT_D 205 )
Specify a view ( COM_PCAT_D 251 )
Product catalog view & & is not available ( COM_PCAT_D 252 )
Specify a catalog area ( COM_PCAT_D 301 )
Catalog area & & does not exist ( COM_PCAT_D 302 )
Catalog area version does not exist ( COM_PCAT_D 303 )
Enter a catalog or a catalog area ( COM_PCAT_D 304 )
Catalog area & & does not exist in active version ( COM_PCAT_D 305 )
User & is processing catalog area & already ( COM_PCAT_D 306 )
You do not have authorization to change catalog area & ( COM_PCAT_D 307 )
You do not have authorization to display or change catalog area & ( COM_PCAT_D 308 )
You do not have authorization to delete catalog area & ( COM_PCAT_D 309 )
You do not have authorization to activate or deactivate area & ( COM_PCAT_D 311 )
Product catalog item with GUID & does not exist ( COM_PCAT_D 401 )
Specify an item ( COM_PCAT_D 402 )
Item version does not exist ( COM_PCAT_D 403 )
Product catalog item & & & does not exist in active version ( COM_PCAT_D 404 )
Object with GUID & does not occur as an item in catalog ( COM_PCAT_D 405 )
Enter an assigned item ( COM_PCAT_D 409 )
Enter a relationship between the items ( COM_PCAT_D 410 )
Characteristics list & does not exist ( COM_PCAT_D 601 )
Enter a characteristics list ( COM_PCAT_D 602 )
Enter a charcteristics list text ( COM_PCAT_D 603 )
User &1 is working on list of catalog characteristics &2 ( COM_PCAT_D 604 )
Enter catalog item characteristic '&1' ( COM_PCAT_D 605 )
Internal error: Function module & wrongly called; contact hotline ( COM_PCAT_D 898 )
Internal error: & & &; inform SAP hotline ( COM_PCAT_D 899 )
Variant &1 does not support list prices ( COM_PCAT_EXPORT 009 )
Catalog &1 does not support any product order numbers ( COM_PCAT_EXPORT 010 )
Specify a business partner and an export profile ( COM_PCAT_EXPORT 017 )
Specify a business partner for export profile &1 ( COM_PCAT_EXPORT 018 )
Specify an export profile for business partner &1 ( COM_PCAT_EXPORT 019 )
Transaction is obsolete, use transaction COMM_PCAT_EXPORT ( COM_PCAT_EXPORT 030 )
Assign partners to catalog view &1 ( COM_PCAT_EXPORT 055 )
The system settings for catalog export are incomplete ( COM_PCAT_EXPORT 061 )
No data records were found for search request ( COM_PCAT_IMS 500 )
Current index for &1 &2 does not exist ( COM_PCAT_IMS 709 )
No delta indexing allowed for the specified variants ( COM_PCAT_IMS 710 )
Characteristics list altered; area index will be re-constructed ( COM_PCAT_IMS 800 )
Index category could not be created; exception &1 ( COM_PCAT_IMS 812 )
Index category could not be created; error code &1 ( COM_PCAT_IMS 813 )
End of indexing with errors; return code &1 ( COM_PCAT_IMS 834 )
Error; publication terminated => &1&2 ( COM_PCAT_IMS 852 )
Error in FTP link to publishing target: &1 ( COM_PCAT_IMS 870 )
A catalog characteristics list already exists with the number &1 ( COM_PCAT_LOC_O 001 )
Characteristics list is used in catalogs; you cannot delete it ( COM_PCAT_LOC_O 003 )
Enter a number for the catalog characteristics list ( COM_PCAT_LOC_O 005 )
Catalog characteristics list number must be alphanumeric ( COM_PCAT_LOC_O 006 )
A catlog item characteristic already exists with the number &1 ( COM_PCAT_LOC_O 101 )
Enter a number for the catalog item characteristic ( COM_PCAT_LOC_O 106 )
Values for master characteristics cannot be changed ( COM_PCAT_LOC_O 107 )
Set type table &1 could not be read ( COM_PCAT_LOC_O 112 )
The set type &1 entered does not contain field &2 ( COM_PCAT_LOC_O 114 )
Enter an attribute or a field name ( COM_PCAT_LOC_O 115 )
Attribute "&1" does not exist ( COM_PCAT_LOC_O 116 )
Characteristic number '&1' is not permitted ( COM_PCAT_LOC_O 117 )
The list already contains a characteristic for the attribute &1 ( COM_PCAT_LOC_O 120 )
You have no authorization to display or change characteristics lists ( COM_PCAT_LOC_O 204 )
Attribute &1 could not be added to the characteristics list &2 ( COM_PCAT_LOC_O 205 )
Set type for list of catalog characteristics &1 could not be created ( COM_PCAT_LOC_O 206 )
Unknown error in program &1; contact the hotline ( COM_PCAT_LOC_O 899 )
Active version of catalog cannot be changed ( COM_PCAT_O 102 )
Product catalog type cannot be changed ( COM_PCAT_O 104 )
Product catalog & does not exist ( COM_PCAT_O 105 )
Catalog identified by ID & alone ( COM_PCAT_O 106 )
Catalog already published. Do you want to delete anyway? ( COM_PCAT_O 109 )
Product catalog &1 is being deleted in the background ( COM_PCAT_O 112 )
Changing the basic characteristics list can have serious consequences ( COM_PCAT_O 114 )
The validity period of variant & is adapted to validity period of catalog ( COM_PCAT_O 118 )
Catalog is used in Web shops. Do you still want to delete? ( COM_PCAT_O 119 )
You are not authorized to create catalogs ( COM_PCAT_O 120 )
You are not authorized to change catalogs ( COM_PCAT_O 121 )
You are not authorized to display catalogs ( COM_PCAT_O 122 )
You are not authorized to delete catalogs ( COM_PCAT_O 123 )
ID of a published catalog cannot be changed ( COM_PCAT_O 125 )
Product catalog &1 is copied in the background ( COM_PCAT_O 128 )
Characteristics list is already used in area & ( COM_PCAT_O 130 )
Variant identified only by ID & and catalog ( COM_PCAT_O 201 )
Variant & not found ( COM_PCAT_O 203 )
Catalog variant & already exists ( COM_PCAT_O 204 )
Deleting a published variant can have serious consequences ( COM_PCAT_O 208 )
You cannot change the sales organization of a catalog variant ( COM_PCAT_O 211 )
You cannot change the distribution channel for a catalog variant ( COM_PCAT_O 214 )
Variant &1 is being deleted in the background ( COM_PCAT_O 218 )
Changing the language of a catalog variant can have serious consequences ( COM_PCAT_O 222 )
Changing the type of unit of measure can have serious consequences ( COM_PCAT_O 224 )
Unit of measure type & is not permitted ( COM_PCAT_O 233 )
Changing the condition type can have serious consequences ( COM_PCAT_O 239 )
Changing the condition access can have serious consequences ( COM_PCAT_O 240 )
Deleting a price informaion can have serious consequences ( COM_PCAT_O 242 )
Purchasing unit of measure cannot be used in the purchasing catalog ( COM_PCAT_O 243 )
Enter the distribution chain before the pricing procedure ( COM_PCAT_O 245 )
Pricing procedure is not permitted for the distribution chain of variants ( COM_PCAT_O 246 )
Enter a distribution chain before the responsible organizational unit ( COM_PCAT_O 247 )
The organizational unit &1 does not match this distribution chain ( COM_PCAT_O 248 )
Maintain a suitable organizational unit ( COM_PCAT_O 249 )
View is only identified on the basis of ID & and catalog ( COM_PCAT_O 251 )
View & does not exist ( COM_PCAT_O 253 )
Catalog view & already exists ( COM_PCAT_O 254 )
The organizational unit &1 does not match this service organization ( COM_PCAT_O 262 )
Identify the catalog area with a GUID ( COM_PCAT_O 301 )
Catalog area type cannot be changed ( COM_PCAT_O 304 )
Area version already exists ( COM_PCAT_O 305 )
Catalog area & already exists ( COM_PCAT_O 306 )
Catalog area & does not exist ( COM_PCAT_O 307 )
Product assignment type cannot be changed ( COM_PCAT_O 308 )
No versions exist for catalog area & => area is deleted ( COM_PCAT_O 309 )
Catalog area & is not available in inactive version ( COM_PCAT_O 310 )
Catalog area & is not available in active version ( COM_PCAT_O 311 )
Identify the catalog area version with a GUID ( COM_PCAT_O 312 )
A work version already exists for the catalog area & ( COM_PCAT_O 313 )
The active version of a catalog area cannot be changed ( COM_PCAT_O 314 )
You cannot delete active versions of a catalog area ( COM_PCAT_O 316 )
Specify a product category when working with automatic product assignment ( COM_PCAT_O 320 )
Changing the area characteristics list can have serious consequences ( COM_PCAT_O 321 )
Changing the product category can have serious consequences ( COM_PCAT_O 322 )
Automatic product assignment is not permitted for product catalog & ( COM_PCAT_O 323 )
Manual product assignment is not permitted for catalog & ( COM_PCAT_O 324 )
Changing the global set type can have serious consequences ( COM_PCAT_O 325 )
Catalog area does not permit maintenance of catalog characteristic lists ( COM_PCAT_O 326 )
Inactive area version already exists: Active version was deleted ( COM_PCAT_O 327 )
Active area version already exists: Inactive version was deleted ( COM_PCAT_O 328 )
Global set type does not match product category of catalog area ( COM_PCAT_O 329 )
Activation indictaor & is not allowed ( COM_PCAT_O 334 )
Indicator & for automatic product assignment is not allowed ( COM_PCAT_O 335 )
Changing the product assignment can have serious consequences ( COM_PCAT_O 336 )
Product category is not permitted for manual product assignment ( COM_PCAT_O 337 )
Local set type is not permitted for automatic product assignment ( COM_PCAT_O 338 )
A work version already exists for the catalog area & ( COM_PCAT_O 339 )
Catalog area & is active. Do you still want to delete it? ( COM_PCAT_O 340 )
Catalog area & contains active objects. Do you still want to delete it? ( COM_PCAT_O 341 )
Catalog area does not permit maintenance of catalog item characteristics ( COM_PCAT_O 343 )
Catalog area(s) are/will be generated from hierarchy & in the background ( COM_PCAT_O 345 )
Active area version does not exist; Not possible to change prod. assign. ( COM_PCAT_O 348 )
Incompatible prod. assign in source and target; copying is not possible ( COM_PCAT_O 349 )
One or more catalog areas could not be copied ( COM_PCAT_O 350 )
Characteristics list used is already used as a basis characteristics list ( COM_PCAT_O 351 )
Catalog areas are/will be copied from catalog & in the background ( COM_PCAT_O 353 )
One or more catalog items could not be copied ( COM_PCAT_O 355 )
Catalog areas and catalog items could not be copied ( COM_PCAT_O 356 )
One or more catalog items could not be transferred ( COM_PCAT_O 357 )
Catalog type & cannot be used for the target catalog ( COM_PCAT_O 358 )
Product & does not exist ( COM_PCAT_O 401 )
Identify the item using a GUID ( COM_PCAT_O 402 )
Item version is only identified on the basis of status ( COM_PCAT_O 403 )
Item with GUID & does not exist ( COM_PCAT_O 405 )
Item version already exists ( COM_PCAT_O 406 )
A work version for item & already exists. Deactivation is not possible ( COM_PCAT_O 407 )
The active version of an item cannot be changed ( COM_PCAT_O 410 )
The active version of an item cannot be deleted ( COM_PCAT_O 411 )
Product catalog item & does not exist with status inactive ( COM_PCAT_O 412 )
Item & does not exist with status active ( COM_PCAT_O 413 )
Catalog area does not permit item maintenance ( COM_PCAT_O 415 )
Product &1 already exists in catalog area &2 ( COM_PCAT_O 418 )
Specify either a language or a catalog variant ( COM_PCAT_O 419 )
Product &1 is not permitted for catalog variant &2 ( COM_PCAT_O 422 )
Product &1 is not permitted for any distribution chains of catalog &2 ( COM_PCAT_O 423 )
Product & does not exist ( COM_PCAT_O 424 )
Inactive item version & already exists => active version deleted ( COM_PCAT_O 425 )
Active item version & already exists => inactive version deleted ( COM_PCAT_O 426 )
Product & does not belong to the product category of the catalog area ( COM_PCAT_O 427 )
Create a catalog variant before creating items ( COM_PCAT_O 428 )
Work version for item & already exists; version is deleted ( COM_PCAT_O 431 )
Product item & is active. Do you still want to delete it? ( COM_PCAT_O 432 )
Product &1 is not permitted for catalog &2 ( COM_PCAT_O 433 )
Product &1 is blocked ( COM_PCAT_O 434 )
Product &1 is not of type &2 and is therefore not allowed ( COM_PCAT_O 436 )
Product &1 is archived ( COM_PCAT_O 437 )
Product &1 does not have data for sales management ( COM_PCAT_O 439 )
At least one of the assigned products for &1 is faulty ( COM_PCAT_O 443 )
Modification affects all occurrences of & in the catalog area ( COM_PCAT_O 519 )
Data imported from & => Changes can be lost ( COM_PCAT_O 522 )
Accessory relationship between item &1 and &2 cannot be created ( COM_PCAT_O 523 )
Item & cannot be used as an accessory item ( COM_PCAT_O 524 )
Item & cannot be the main item of an accessory relationship ( COM_PCAT_O 525 )
Items &1 and &2 are not contained in the same catalog area ( COM_PCAT_O 526 )
Catalog area does not permit maintenance of accessory relationships ( COM_PCAT_O 527 )
Product &1 and &2 do not have the same distribution chain ( COM_PCAT_O 529 )
You have no authorization to create catalog characteristic lists ( COM_PCAT_O 530 )
You have no authorization to change catalog characteristic lists ( COM_PCAT_O 531 )
You have no authorization to display catalog characteristic lists ( COM_PCAT_O 532 )
You have no authorization to delete catalog characteristic lists ( COM_PCAT_O 533 )
Access (&1) without condition type is not possible ( COM_PCAT_O 535 )
Condition type (&1) is not possible without access ( COM_PCAT_O 536 )
Access (&1) cannot be used; see long text ( COM_PCAT_O 537 )
Access (&1) for condition type (&2) is not allowed; see long text ( COM_PCAT_O 538 )
Catalog price type (&1) is not allowed ( COM_PCAT_O 539 )
BBP condition type (&1) is not allowed; see long text ( COM_PCAT_O 542 )
BBP access (&1) for condition type (&2) is not allowed; see long text ( COM_PCAT_O 543 )
No organizational unit was found ( COM_PCAT_O 546 )
Display only ( COM_PCAT_PON_CD 001 )
First select the line that you want to move ( COM_PCAT_UI 002 )
Select the line that you want to move the item to ( COM_PCAT_UI 003 )
Select the target catalog or target area ( COM_PCAT_UI 005 )
The highest node of the catalog structure cannot be deleted ( COM_PCAT_UI 006 )
Display and maintenance of item text is being closed ( COM_PCAT_UI 010 )
Display and maintenance of text for catalog area is being closed ( COM_PCAT_UI 011 )
Catalog type set from '&' to '&' ( COM_PCAT_UI 020 )
Specify a catalog type ( COM_PCAT_UI 021 )
Changing the product category can have serious consequences ( COM_PCAT_UI 031 )
First choose a product hierarchy ( COM_PCAT_UI 032 )
User &1 is currently processing area &2. It will be excluded as a result ( COM_PCAT_UI 033 )
User &1 is currently processing area &2. It will be excluded as a result ( COM_PCAT_UI 034 )
Choose the area that you want to move in front of or under ( COM_PCAT_UI 042 )
Select the corresponding push button to move or reassign ( COM_PCAT_UI 045 )
Error reading product category & ( COM_PCAT_UI 050 )
Error reading global set type & ( COM_PCAT_UI 051 )
Error reading local set type & ( COM_PCAT_UI 052 )
Error while generating data structures for item maintenance ( COM_PCAT_UI 053 )
Product &1 is not permitted for variant &2 ( COM_PCAT_UI 060 )
Product ID of &1 is not clear, identify the product more specifically ( COM_PCAT_UI 082 )
Changes to the catalog structure take place without activation ( COM_PCAT_UI 083 )
The catalog is used in campaigns; it is impossible to delete it ( COM_PCAT_UI 111 )
The catalog is used in ICSS; you cannot delete ( COM_PCAT_UI 112 )
The catalog variant is used in ICSS; you cannot delete ( COM_PCAT_UI 113 )
An error occured during the generation of a screen element ( COM_PCAT_UI 251 )
Internal error: The desired object is not in the tree ( COM_PCAT_UI 301 )
Internal error: The object tree could not be built ( COM_PCAT_UI 302 )
The object tree could not be built ( COM_PCAT_UI 303 )
An error occured during the updating of internal data ( COM_PCAT_UI 304 )
Error when reading file &1 ( COM_PCAT_UI 702 )
Fatal error during RFC call for IPC server (long text) ( COM_PME_DEPEDI 081 )
Explanation Only Maintained in Other Language (Description) ( COM_PME_DEPEDI 082 )
No syntax errors were found &1 ( COM_PME_PARSER 000 )
Error in syntax check &1 ( COM_PME_PARSER 002 )
Dependency cannot be checked because there are too many errors ( COM_PME_PARSER 004 )
Invalid character ( COM_PME_PARSER 011 )
Missing quote mark ( COM_PME_PARSER 012 )
Missing comma ( COM_PME_PARSER 015 )
Expression too long ( COM_PME_PARSER 016 )
Semicolon missing ( COM_PME_PARSER 017 )
Error: remaining part of expression cannot be interpreted ( COM_PME_PARSER 021 )
Error: no source code entered ( COM_PME_PARSER 022 )
Error in syntax check for simple condition ( COM_PME_PARSER 023 )
Syntax error in simple action/procedure ( COM_PME_PARSER 024 )
Syntax error in constraint ( COM_PME_PARSER 025 )
Syntax check for rule found errors ( COM_PME_PARSER 026 )
Comparison operator required ( COM_PME_PARSER 031 )
Alphanumeric operator required ( COM_PME_PARSER 032 )
Link operator "=" required ( COM_PME_PARSER 033 )
Boolean expression expected ( COM_PME_PARSER 034 )
Key expected ( COM_PME_PARSER 035 )
Object variable expected ( COM_PME_PARSER 036 )
Logical expression required ( COM_PME_PARSER 037 )
Numeric expression required ( COM_PME_PARSER 038 )
Symbolic expression required ( COM_PME_PARSER 039 )
Language element &1 only allowed in procedures ( COM_PME_PARSER 040 )
Condition entered is inconsistent ( COM_PME_PARSER 041 )
Partial condition not allowed: NOT SPECIFIED &1&2 ( COM_PME_PARSER 042 )
Partial condition not allowed: NOT TYPE_OF ( COM_PME_PARSER 043 )
Partial condition not allowed: NOT &1 = ... ( COM_PME_PARSER 044 )
Partial condition not allowed: &1 <> ... ( COM_PME_PARSER 045 )
Attribute description with master data reference expected ( COM_PME_PARSER 046 )
Partial condition not allowed: NOT PART_OF ( COM_PME_PARSER 047 )
Simple condition without variables not allowed ( COM_PME_PARSER 048 )
Attribute &1 is not restrictable ( COM_PME_PARSER 049 )
Attribute is multiple value &1 ( COM_PME_PARSER 050 )
Reference to attributed required ( COM_PME_PARSER 051 )
No attribute: &1 ( COM_PME_PARSER 052 )
No single-vale attribute &1 ( COM_PME_PARSER 053 )
&1 is not a multiple-value attribute ( COM_PME_PARSER 054 )
&1 is not a numeric attribute ( COM_PME_PARSER 055 )
Attribute &1 not alphanumeric ( COM_PME_PARSER 056 )
Reference to object required: &1 found ( COM_PME_PARSER 057 )
Attribute not valid for class (&1)&2: &3 ( COM_PME_PARSER 058 )
Attribute not valid for object &1: &2 ( COM_PME_PARSER 059 )
Partial condition not allowed: NOT &1 &2 ( COM_PME_PARSER 060 )
Reference to a class/object required ( COM_PME_PARSER 061 )
Invalid object type: &1 ( COM_PME_PARSER 062 )
Reference to object $ROOT, $PARENT or $SELF required ( COM_PME_PARSER 063 )
Set (&1)&2 not valid ( COM_PME_PARSER 064 )
Syntax error in class entry: expression required in form <(...)...> ( COM_PME_PARSER 065 )
Invalid combination of object identifier/set type: (&1)(&2) ( COM_PME_PARSER 066 )
Object name expected in parantheses ( COM_PME_PARSER 068 )
Partial key expression <formal_param> = <partial_key> expected ( COM_PME_PARSER 069 )
Object reference/variable used more than once: &1 &2 ( COM_PME_PARSER 071 )
Attribute reference/variable used more than once: &1 &2 ( COM_PME_PARSER 072 )
Object Does Not Exist ( COM_PME_PARSER 073 )
Error in object key entry &1 for object type &2 ( COM_PME_PARSER 074 )
Character string required in inverted commas ( COM_PME_PARSER 075 )
Key too long: &1. Maximum length &2. ( COM_PME_PARSER 076 )
Key for object type &1 incomplete ( COM_PME_PARSER 077 )
Description for object key too long: &1 ( COM_PME_PARSER 078 )
Punctuation: Character &1 expected ( COM_PME_PARSER 081 )
Keyword incorrect: closed with ':' ( COM_PME_PARSER 082 )
Reserved name &1 invalid as key/variable name ( COM_PME_PARSER 084 )
Invalid variable name &1 ( COM_PME_PARSER 085 )
Formal parameter &1 not valid for: &2 ( COM_PME_PARSER 086 )
Data type error: formal parameter &1 is of type &2 ( COM_PME_PARSER 087 )
Error in standard dependency: &1 ( COM_PME_PARSER 091 )
Invalid value &1 for attribute &2 ( COM_PME_PARSER 101 )
Variable declaration for object expected ( COM_PME_PARSER 102 )
Value &1 has no subordinate values ( COM_PME_PARSER 103 )
Invalid value &1 for attribute &2 with class/object &3 ( COM_PME_PARSER 104 )
Invalid value &1 for parameter &2 in table/function &3 ( COM_PME_PARSER 105 )
Value &1 has subordinate values ( COM_PME_PARSER 106 )
Invalid value &1 for parameter &2 ( COM_PME_PARSER 107 )
Error in predefined function &1 ( COM_PME_PARSER 109 )
Keyword RESTRICTION: expected ( COM_PME_PARSER 110 )
'PART_OF'/'SUBPART_OF' dependency incorrect ( COM_PME_PARSER 111 )
Table/function argument incorrect &1 ( COM_PME_PARSER 112 )
Error in table/function declaration ( COM_PME_PARSER 113 )
Error in generic function module interface (ABAP): &1 ( COM_PME_PARSER 114 )
Error in conditional restriction (with IF) ( COM_PME_PARSER 116 )
Restriction not possible: expression not linear ( COM_PME_PARSER 117 )
Table/function does not allow inference of values ( COM_PME_PARSER 121 )
Multiple-value formal parameter &1 in table/function &2 ( COM_PME_PARSER 122 )
Formal parameter &1 in table/function &2 is restrictable ( COM_PME_PARSER 123 )
Current parameter &1 in table/function &2 is multiple value ( COM_PME_PARSER 124 )
Inference of default value for &1 in table/function not possible ( COM_PME_PARSER 125 )
Required formal parameter missing for inference in &1 ( COM_PME_PARSER 126 )
No values can be inferred for action/procedure ( COM_PME_PARSER 127 )
Net complete - constraint/rule cannot be entered in net ( COM_PME_PARSER 130 )
Constraint has too many value assignment alternatives: &1 ( COM_PME_PARSER 131 )
Inference for attribute variable &2 (facet &1) not possible ( COM_PME_PARSER 132 )
Restrictable and other attribute cannot be inferred simultaneously ( COM_PME_PARSER 133 )
Dependency cannot be compiled: reason #&1 ( COM_PME_PARSER 135 )
Attribute variable &2 (facet &1) is declared but not used ( COM_PME_PARSER 136 )
Object variable &1 is declared but not used ( COM_PME_PARSER 137 )
Attribute variable &2 (facet &1) does not appear in the execution section ( COM_PME_PARSER 138 )
Object variable &1 does not appear in the execution section ( COM_PME_PARSER 139 )
Incorrect BOM item number &1 ( COM_PME_PARSER 141 )
Expression has incorrect length &1. Length &2 was expected ( COM_PME_PARSER 142 )
Table &1 does not exist ( COM_PME_PARSER 151 )
Function &1 is not declared ( COM_PME_PARSER 152 )
ABAP function module does not exist ( COM_PME_PARSER 156 )
ABAP function module is not activated ( COM_PME_PARSER 157 )
&1: expected facet &2, found &3 ( COM_PME_PARSER 160 )
&1: expected <inferbl> facet, found &3 ( COM_PME_PARSER 161 )
&1: expected Boolean facet, found &2 ( COM_PME_PARSER 162 )
&1: expected facet ALL_OFFERS or ALL_REQUIRES, found &3 ( COM_PME_PARSER 163 )
&1: expected numeric facet, found &2 ( COM_PME_PARSER 164 )
&1: expected attribute type &2, found: &3 ( COM_PME_PARSER 169 )
New version of net compilation: &1 &2 &3 &4 ( COM_PME_PARSER 391 )
Internal error in function & & & & ( COM_PME_PARSER 400 )
Restriction of value set via dependencies not yet supported: &1 ( COM_PME_PARSER 406 )
Attribute &1: data type "UDEF" not yet supported ( COM_PME_PARSER 407 )
Runtime error in constraint condition: #&1 &2 ( COM_PME_PARSER 471 )
Runtime error in constraint restriction: #&1 &2 ( COM_PME_PARSER 472 )
Error in dependency processing: condition &1 is empty ( COM_PME_PARSER 501 )
Error in dependency processing: action &1 is empty ( COM_PME_PARSER 502 )
Error processing dependency &1: instance &2 not known ( COM_PME_PARSER 508 )
Error in dependency processing: division by 0 in dependency &1 ( COM_PME_PARSER 510 )
Error in dependency processing: dependency &1, function &2 ( COM_PME_PARSER 511 )
Error in dependency processing: dependency &1, table &2 ( COM_PME_PARSER 512 )
No value could be inferred from table &2: dependency &1 ( COM_PME_PARSER 513 )
Error in dependency processing: dependency &1, function &2 ( COM_PME_PARSER 514 )
Error in dependency processing: dependency &1, function &2 ( COM_PME_PARSER 515 )
Error in dependency &1: negative value for attribute &2 ( COM_PME_PARSER 516 )
Compilation of dependency &1 incorrect: code line &2 not found ( COM_PME_PARSER 520 )
Compilation of dependency &1 incorrect: action expected in line &2 ( COM_PME_PARSER 530 )
Compilation of dependency &1 incorrect: condition expected in line &2 ( COM_PME_PARSER 540 )
Compilation of dependency &1 incorrect: invalid operator in line &2 ( COM_PME_PARSER 542 )
Compilation of dependency &1 incorrect: alphan. term expected in line &2 ( COM_PME_PARSER 546 )
Compilation of dependency &1 incorrect: variable required in line &2 ( COM_PME_PARSER 547 )
Compilation of dependency &1 incorrect: obj. variable required in line &2 ( COM_PME_PARSER 548 )
Compilation of dependency &1 incorrect: type required in line &2 ( COM_PME_PARSER 549 )
Compilation of dependency &1 incorrect: attrib. key missing from line &2 ( COM_PME_PARSER 550 )
Compilation of dependency &1 incorrect: value qty required in line &2 ( COM_PME_PARSER 554 )
Compilation of dependency &1 incorrect: literal required in line &2 ( COM_PME_PARSER 556 )
Compilation of dependency &1 incorrect: list element required in line &2 ( COM_PME_PARSER 558 )
Trace settings saved ( COM_PME_PARSER 568 )
Object instance &1 entered for item &2 in instance &3 ( COM_PME_PARSER 570 )
Deleted: object instance &1 ( COM_PME_PARSER 572 )
Confirmed: object instance &1 ( COM_PME_PARSER 573 )
Value &2 entered for attribute &1 ( COM_PME_PARSER 574 )
Deleted: Attribute &1 with value &2 ( COM_PME_PARSER 576 )
Confirmed: Attribute &1 with value &2 ( COM_PME_PARSER 577 )
Conflict of values: Attribute &1 with value &2 ( COM_PME_PARSER 578 )
Specialized: object instance &1 ( COM_PME_PARSER 581 )
Specialization withdrawn for object instance &1 ( COM_PME_PARSER 582 )
Constraint &1 is violated ( COM_PME_PARSER 610 )
Inconsistent values inferred for attribute &1 ( COM_PME_PARSER 613 )
No further explanation available ( COM_PME_PARSER 640 )
Invalid cursor position ( COM_PME_PARSER 642 )
Maximum nesting depth for explanation reached ( COM_PME_PARSER 643 )
No text found for dependency ( COM_PME_PARSER 646 )
No value assigned to mandatory field &1 ( COM_PONCAT_O 000 )
Catalog &1 has no catalog ID ( COM_PONCAT_O 001 )
Catalog &1 does not work with product order numbers ( COM_PONCAT_O 002 )
Global Customizing for product order number has not been maintained yet ( COM_PONCAT_O 003 )
ID is not permitted: No product order number exists in Customizing ( COM_PONCAT_O 005 )
ID contains characters that are not permitted ( COM_PONCAT_O 006 )
ID must be &1 characters long ( COM_PONCAT_O 008 )
Search for free IDs is not possible with &1 ( COM_PONCAT_O 009 )
Campaign cannot be coded in product order number ( COM_PONCAT_O 011 )
Campaign &1 cannot be coded in product order number ( COM_PONCAT_O 012 )
&1 is neither a product order number, nor a valid product ID ( COM_PONORD_O 000 )
&1 is not a product order number; it is a valid product ID ( COM_PONORD_O 001 )
&1 is not a valid campaign ID ( COM_PONORD_O 002 )
No variant from the product catalog &2 is assigned to campaign &1 ( COM_PONORD_O 003 )
Product type cannot be changed as set types assigned to subcategories ( COM_PRCAT 006 )
Set type &2 is already used in the category hierarchy &1 ( COM_PRCAT 007 )
Products of this category already exist; Set type cannot be deleted ( COM_PRCAT 008 )
Products of subcategory already exist; Set type cannot be deleted ( COM_PRCAT 009 )
You can only change the category data in the original system & ( COM_PRCAT 010 )
Assignment to a category may be deleted only in the original system & ( COM_PRCAT 012 )
You can only assign the product to the category in the original system & ( COM_PRCAT 013 )
Set type &1 cannot be deleted: Inherited from higher-level category ( COM_PRCAT 014 )
Category &1 contains set type &2 that is maintained for the product ( COM_PRCAT 015 )
Assign product &1 to a category from hierarchy &2 ( COM_PRCAT 016 )
Assignment to category &1 cannot be deleted ( COM_PRCAT 017 )
Set type &1 is not allowed for product type &2 ( COM_PRCAT 018 )
Value &1 is not permitted for attribute &2 ( COM_PRCAT 020 )
Range &1 to &2 is not allowed for attribute &3 ( COM_PRCAT 021 )
Set type &1 contains multiple-value attributes ( COM_PRCAT 025 )
Product type cannot be changed as products exist for subcategories ( COM_PRCAT 040 )
Attribute values already being used cannot be deleted ( COM_PRCAT 041 )
Value &1 is too long or does not correspond to attribute type (attr. &2) ( COM_PRCAT 042 )
No product type maintained for category &; no set types can be assigned ( COM_PRCAT 043 )
Cannot change object family; set types assigned to category & ( COM_PRCAT 045 )
Cannot change object family; set types assigned to sub-categories ( COM_PRCAT 046 )
Cannot change object family; objects already exist for sub-categories ( COM_PRCAT 049 )
Cannot change object family; products exist for sub-categories ( COM_PRCAT 050 )
Objects of this category already exist: Reference indicator cannot be set ( COM_PRCAT 057 )
Objects of subcategory already exist; reference indicator cannot be set ( COM_PRCAT 058 )
Alternative ID type &1 uses set type &2, which is not assigned ( COM_PRCAT 059 )
Category ID &1 not unique ( COM_PRCAT 065 )
Relationship "&1" cannot be created for product &2 ( COM_PRCAT 066 )
Relationship type &2 is already being used in category hierarchy &1 ( COM_PRCAT 067 )
No product type specified for category &: Relship type cannot be assigned ( COM_PRCAT 068 )
Relationship type cannot be deleted; inherited from higher-level category ( COM_PRCAT 070 )
Products of this category already exist: Relnship type cannot be deleted ( COM_PRCAT 071 )
Products of subcategory already exist: Relnship type cannot be deleted ( COM_PRCAT 072 )
All other relationship types no longer displayed in product ( COM_PRCAT 073 )
Set type &1 cannot be assigned to categories for individual objects ( COM_PRCAT 077 )
Ind. "Competitor Product" cannot be changed; products exist for category ( COM_PRCAT 080 )
Product references not active: Set type &1 cannot be assigned ( COM_PRCAT 081 )
Partner det. procedure cannot be maintained; category has no obj. family ( COM_PRCAT 084 )
Product &1 is not assigned to category &2 ( COM_PRCAT 088 )
Certain set types can only be assigned to the base categories ( COM_PRCAT 095 )
Category /set type &2 is locked by user &1 ( COM_PRCAT 109 )
System error occurred when calling &1 (communication with IPC) ( COM_PRCAT 116 )
Values for multi-value attributes deleted for &1 ( COM_PRCAT 214 )
Documents of &1 will not be displayed in future ( COM_PRCAT 220 )
Conditions of &1 will not be displayed in future ( COM_PRCAT 221 )
According to config. model &2, product &1 must be assigned to category &3 ( COM_PRCAT 222 )
RFC destination & does not exist ( COM_PRCAT 301 )
Hierarchy & already exists in target system ( COM_PRCAT 303 )
Logical system & is not in table & ( COM_PRCAT 305 )
Variant condition key & does not exist ( COM_PRCAT 401 )
Moving category &1 to category &2 is not possible ( COM_PRCAT 602 )
Moving category &1 to category &2 is not possible ( COM_PRCAT 603 )
Moving category &1 to category &2 is not possible ( COM_PRCAT 604 )
Moving category &1 to category &2 is not possible ( COM_PRCAT 605 )
Moving category &1 to category &2 is not possible ( COM_PRCAT 606 )
Moving category &1 to category &2 is not possible ( COM_PRCAT 607 )
Moving category &1 to category &2 is not possible ( COM_PRCAT 608 )
Moving category &1 to category &2 is not possible ( COM_PRCAT 609 )
Moving category &1 to category &2 is not possible ( COM_PRCAT 610 )
Moving category &1 to category &2 is not possible ( COM_PRCAT 611 )
Moving category &1 to category &2 is not possible ( COM_PRCAT 612 )
Moving category &1 to category &2 is not possible ( COM_PRCAT 613 )
Moving category &1 to category &2 is not possible ( COM_PRCAT 614 )
Error while writing data to table & ( COM_PRCUSTUI 854 )
Table &1 in client &2 contains several views with the same ID ( COM_PRCUSTUI 856 )
The imported hierarchy identifiers are not consistent ( COM_PRDCATHIERXI 000 )
No catalog views could be defined for catalog &1 ( COM_PRDCAT_CVIEWS 010 )
Catalog &1 has been edited by another user ( COM_PRDCAT_CVIEWS 011 )
Catalog &1 contains errors, it cannot be processed ( COM_PRDCAT_CVIEWS 012 )
Catalog &1 is being processed, data is still being updated ( COM_PRDCAT_CVIEWS 013 )
Catalog copy &1 is incomplete, area &2 is missing ( COM_PRDCAT_CVIEWS 014 )
Catalog copy &1 is incomplete, item &2 is missing in area &3 ( COM_PRDCAT_CVIEWS 015 )
Catalog &1 has copies for collaborative views ( COM_PRDCAT_CVIEWS 016 )
The imported product IDs are not consistent ( COM_PRDXI_DISTR 001 )
Internal error & in authorization check for products ( COM_PRODUCT 010 )
You require an authorization to create products in authorization group & ( COM_PRODUCT 018 )
You require an authorization to change products in authorization group & ( COM_PRODUCT 019 )
You require an authorization to display products in authorization group & ( COM_PRODUCT 020 )
You require an authorization to delete products in authorization group & ( COM_PRODUCT 021 )
Specified ID & is not used by any vendor ( COM_PRODUCT 023 )
Specified ID & is not used by any content provider ( COM_PRODUCT 024 )
No relevant active product & found ( COM_PRODUCT 028 )
Specified ID & is not used by any manufacturer ( COM_PRODUCT 029 )
Specified ID & is not used by any customer ( COM_PRODUCT 030 )
No set types assigned to object family & ( COM_PRODUCT 036 )
Inconsistencies in parameters when calling a function module ( COM_PRODUCT 041 )
No relevant product was found for configuring product &1 ( COM_PRODUCT 042 )
Product ID not unique; call up F4 Help for product ID ( COM_PRODUCT 043 )
Note 418886: Data inconsistency exists for product &1 ( COM_PRODUCT 045 )
Configurable products are not permitted for product type &1 ( COM_PRODUCT 046 )
Competitor product &1 can be displayed only ( COM_PRODUCT 059 )
Object type & has several subtypes ( COM_PRODUCT 071 )
90% of the internal product IDs for category &1 have been assigned ( COM_PRODUCT 101 )
The last internal product ID for category &1 has been assigned ( COM_PRODUCT 102 )
Product &1 cannot be assigned as an accessory ( COM_PRODUCT 121 )
Status '&1' is not permitted for product '&2' ( COM_PRODUCT 208 )
Invalid state '&1' for status '&2' ( COM_PRODUCT 209 )
Status '&1' is not permitted for set type '&2' ( COM_PRODUCT 210 )
Relationships for &1 &2 were not copied. Please create manually ( COM_PRODUCT 485 )
Data cannot be maintained for set type & ( COM_PRODUCT 503 )
This function is not supported for set type & ( COM_PRODUCT 505 )
Assign a hierarchy to the application 'Product' ( COM_PRODUCT 553 )
Assign a base category to the product ( COM_PRODUCT 554 )
Category &1 is locked; set type &2 cannot be saved ( COM_PRODUCT 602 )
Category &1 is locked by user &2; product cannot be changed ( COM_PRODUCT 606 )
Simulation not possible; save product &1 first ( COM_PRODUCT 607 )
Enter a valid validation class ( COM_PRODUCT 691 )
The description of product &1 in language &2 consists of blanks only ( COM_PRODUCT 703 )
The description of product &1 cannot be changed in language &2 ( COM_PRODUCT 706 )
Enter a logical system ( COM_PRODUCT 707 )
There is no history of the description in language &2 for the product &1 ( COM_PRODUCT 709 )
Logical system &1 does not exist in table TBDLS ( COM_PRODUCT 714 )
The long text only contains blanks (&1, &2, &3, &4) ( COM_PRODUCT 751 )
Text object &1 is not valid for materials or services ( COM_PRODUCT 752 )
Text ID &1 is not valid for materials or services ( COM_PRODUCT 754 )
Sales organization &1 is not assigned to a CRM sales organization ( COM_PRODUCT 756 )
Distribution channel &1 is unknown in the CRM System ( COM_PRODUCT 757 )
No sales data for distribution chain &1 &2 ( COM_PRODUCT 759 )
Deletion without archiving is not allowed in the productive client ( COM_PRODUCT 807 )
You do not have the authorization for deletion without archiving ( COM_PRODUCT 808 )
Register to execute this report ( COM_PRODUCT 809 )
Serious error in tables or in program ( COM_PRODUCT 812 )
Specified category &1 is not allowed for individual objects ( COM_PRODUCT 816 )
Changes can affect individual objects ( COM_PRODUCT 817 )
Product &1 does not allow category &2 references ( COM_PRODUCT 818 )
Reference product data no longer available ( COM_PRODUCT 819 )
Maintenance of references not allowed ( COM_PRODUCT 824 )
Only one category may be marked as 'Default' per hierarchy ( COM_PRODUCT 825 )
Category &2 is not assigned to any object family ( COM_PRODUCT 828 )
Reference product &1 does not have the same type as the object ( COM_PRODUCT 829 )
Internal error in &1 ( COM_PRODUCT 897 )
Hierarchy for material types does not exist ( COM_PRODUCT_API 000 )
Category for material type & does not exist ( COM_PRODUCT_API 001 )
Category for material group & does not exist ( COM_PRODUCT_API 002 )
Category for product hierarchy & does not exist ( COM_PRODUCT_API 003 )
Category for service category & does not exist ( COM_PRODUCT_API 004 )
Hierarchy for service categories does not exist ( COM_PRODUCT_API 005 )
Contains no materials which can be uploaded ( COM_PRODUCT_API 006 )
No bills of material ( COM_PRODUCT_API 007 )
Bill of material &1 cannot be loaded (material &2 missing) ( COM_PRODUCT_API 008 )
API error: Set type &1 for product type &2 unknown ( COM_PRODUCT_API 011 )
Internal API error: &1 can only be called once per transaction ( COM_PRODUCT_API 012 )
Error ocurred when a function was called in the SAP System ( COM_PRODUCT_API 051 )
Input parameter &1 contains invalid value ( COM_PRODUCT_API 053 )
Input data for industrial material is not fully maintained ( COM_PRODUCT_API 054 )
Input data for retail material is not fully maintained ( COM_PRODUCT_API 055 )
Specified RFC destination &1 is not defined ( COM_PRODUCT_API 057 )
An RFC destination could not be determined for the upload ( COM_PRODUCT_API 058 )
Upload is not allowed for product type &1 ( COM_PRODUCT_API 059 )
Material type &1 specified for industrial material is not allowed ( COM_PRODUCT_API 061 )
Material type &1 specified for retail material is not allowed ( COM_PRODUCT_API 062 )
No default value defined for the base unit of measure for product type &1 ( COM_PRODUCT_API 064 )
No SAP sales organization found for CRM sales organization &1 ( COM_PRODUCT_API 065 )
Product &1 &3 with type &2 could not be uniquely identified ( COM_PRODUCT_API 066 )
Material &1 does not exist in SAP System ( COM_PRODUCT_API 067 )
Material master data for material &1 is inconsistent ( COM_PRODUCT_API 068 )
Errors occurred when uploading product ( COM_PRODUCT_API 069 )
Product uploaded successfully ( COM_PRODUCT_API 070 )
Product uploaded successfully ( COM_PRODUCT_API 071 )
Errors occurred when uploading product &1 &2 &3 ( COM_PRODUCT_API 072 )
Material category &1 entered for retail material is not allowed ( COM_PRODUCT_API 073 )
Errors occurred during automatic upload ( COM_PRODUCT_API 076 )
No history read module specified for set type & ( COM_PRODUCT_API 101 )
No history table data type specified for set type & ( COM_PRODUCT_API 102 )
Archiving terminated: PME interface error occured ( COM_PRODUCT_ARCHIVE 033 )
Archiving terminated: PME server not active ( COM_PRODUCT_ARCHIVE 034 )
Termination: Error when reading archive file &1; Details log number & ( COM_PRODUCT_ARCHIVE 043 )
Program &1: Termination due to different archive and database structure ( COM_PRODUCT_ARCHIVE 045 )
Program &1: Termination due to access error to database for product &3 ( COM_PRODUCT_ARCHIVE 046 )
Program &1: Product &4 no longer exists on the database ( COM_PRODUCT_ARCHIVE 047 )
Unable to delete product data, for details see log number &1 ( COM_PRODUCT_ARCHIVE 051 )
Unable to lock product &1: Will not be deleted ( COM_PRODUCT_ARCHIVE 053 )
Product &1 not deleted: PME server not active ( COM_PRODUCT_ARCHIVE 054 )
Product &1 not deleted: PME interface not active ( COM_PRODUCT_ARCHIVE 055 )
Internal error occurred during method call ( COM_PRODUCT_BOM 001 )
There is more than one relationship type ( COM_PRODUCT_BOM 002 )
Product &1 may not be a header product in logical system &2 ( COM_PRODUCT_BOM 003 )
Product &1 may not be a component product in logical system &2 ( COM_PRODUCT_BOM 004 )
Multi-level component lists are not allowed ( COM_PRODUCT_BOM 005 )
Error reading logical system ( COM_PRODUCT_BOM 009 )
An error occurred when posting the bill of material in the OLTP System ( COM_PRODUCT_BOM 011 )
Upload of structured products does not support mass data ( COM_PRODUCT_BOM 012 )
Error converting unit of measure &1 to ISO unit of measure ( COM_PRODUCT_BOM 013 )
Internal error occurred when calling a function module ( COM_PRODUCT_BOM 014 )
First upload the header product to the OLTP System ( COM_PRODUCT_BOM 015 )
Component list of product was successfully uploaded ( COM_PRODUCT_BOM 016 )
First upload component &1 to OLTP System ( COM_PRODUCT_BOM 017 )
Maintain component list of product &1 in original system &2 ( COM_PRODUCT_BOM 018 )
Item number &1 already contained in overview ( COM_PRODUCT_BOM 101 )
Component quantity must be greater than 0 ( COM_PRODUCT_BOM 102 )
Enter a maximum quantity that is greater than the minimum quantity &1 ( COM_PRODUCT_BOM 103 )
Header product &1 is not configurable ( COM_PRODUCT_BOM 104 )
Enter an item number ( COM_PRODUCT_BOM 105 )
Specify a unit of measure ( COM_PRODUCT_BOM 106 )
Drag a maximum of one product onto the component list ( COM_PRODUCT_BOM 107 )
Configurable products are not allowed in structured products ( COM_PRODUCT_BOM 108 )
Financing products are not allowed in structured products ( COM_PRODUCT_BOM 109 )
You are assigning a service product as a component (see long text) ( COM_PRODUCT_BOM 110 )
Non-generated (modified) objects found ( COM_PRODUCT_BW_OLTP 003 )
&1 condition maintenance has returned 'high' priority errors ( COM_PRODUCT_CONDITIO 001 )
No condition group maintained for application & ( COM_PRODUCT_CONDITIO 002 )
&1 condition maintenance has returned 'medium' priority errors ( COM_PRODUCT_CONDITIO 003 )
&1 condition maintenance has returned 'low' priority errors ( COM_PRODUCT_CONDITIO 004 )
&1 condition maintenance has returned 'very high' priority errors ( COM_PRODUCT_CONDITIO 006 )
Pricing conditions exist for the changed unit of measure & ( COM_PRODUCT_CONDITIO 008 )
Function module &1 returns error &2 in the condition technique ( COM_PRODUCT_CONDITIO 009 )
Cond. maintenance group &1: Condition table &3 does not contain field &2 ( COM_PRODUCT_CONDITIO 011 )
No number range elements (base categories) can be determined ( COM_PRODUCT_CUST 000 )
Very few numbers left ( COM_PRODUCT_CUST 001 )
Assigned number & is the last free number ( COM_PRODUCT_CUST 002 )
A number could not be determined ( COM_PRODUCT_CUST 003 )
Product ID cannot be determined internally ( COM_PRODUCT_CUST 004 )
An internal number range interval cannot be determined for category & ( COM_PRODUCT_CUST 005 )
Numbers cannot be assigned externally for product type & / category & ( COM_PRODUCT_CUST 008 )
Product ID & is not in the valid range ( COM_PRODUCT_CUST 009 )
Numeric product IDs can have a maximum of 20 digits in your system ( COM_PRODUCT_CUST 010 )
RFC destination & was not found ( COM_PRODUCT_CUST 011 )
Client & was not found in destination & ( COM_PRODUCT_CUST 012 )
You cannot reset the indicator as inactive products still exists ( COM_PRODUCT_CUST 013 )
& cannot be used as a reference product type ( COM_PRODUCT_CUST 014 )
& is already being used as a reference product type for number assignment ( COM_PRODUCT_CUST 015 )
Product type & has a different product type as reference product type ( COM_PRODUCT_CUST 016 )
You cannot make this change as configurable products still exist ( COM_PRODUCT_CUST 017 )
Product &1 is being used in Customizing as a product template ( COM_PRODUCT_CUST 020 )
Country & is not defined in the system ( COM_PRODUCT_CUST 022 )
Region &2 is not defined in the system for country &1 ( COM_PRODUCT_CUST 023 )
Description for region &2 is not defined in the system for country &1 ( COM_PRODUCT_CUST 025 )
No product types activated for product maintenance ( COM_PRODUCT_CUST 051 )
Product type &1 already being used; deactivation therefore not possible ( COM_PRODUCT_CUST 054 )
Product type & is deactivated in the system ( COM_PRODUCT_CUST 055 )
No descriptions exist for product &1 ( COM_PRODUCT_CUSTMSG 000 )
GTIN &1 (&2) has already been assigned ( COM_PRODUCT_CUSTMSG 001 )
Product &2 already exists for product type &1 ( COM_PRODUCT_CUSTMSG 002 )
Category ID '&1' contains special characters ( COM_PRODUCT_CUSTMSG 003 )
Enter a base unit of measure ( COM_PRODUCT_CUSTMSG 006 )
&1 is a reserved term ( COM_PRODUCT_CUSTMSG 007 )
Descriptions do not exist ( COM_PRODUCT_CUSTMSG 008 )
Product ID &2 too long; shorten your entry to &1 characters ( COM_PRODUCT_CUSTMSG 009 )
Attribute value &1 does not conform to the 7-bit ASCII standard ( COM_PRODUCT_CUSTMSG 010 )
Product ID &1 contains invalid special characters ( COM_PRODUCT_CUSTMSG 011 )
Attribute alternative ID must begin with a letter ( COM_PRODUCT_CUSTMSG 012 )
Category ID '&2' too long; shorten your entry to &1 characters ( COM_PRODUCT_CUSTMSG 013 )
Attribute alternative ID &2 too long; shorten your entry to &1 characters ( COM_PRODUCT_CUSTMSG 014 )
Attribute value &2 too long; shorten your entry to &1 characters ( COM_PRODUCT_CUSTMSG 015 )
Category ID '&1' contains invalid special characters ( COM_PRODUCT_CUSTMSG 016 )
Attribute alternative ID &1 contains invalid special characters ( COM_PRODUCT_CUSTMSG 017 )
Category ID should not begin with an underscore ( COM_PRODUCT_CUSTMSG 018 )
Check-digit in GTIN &1 (unit of measure &2) is invalid ( COM_PRODUCT_CUSTMSG 020 )
Only attribute lengths of up to 26 characters are permitted ( COM_PRODUCT_CUSTMSG 021 )
Only attribute lengths of up to 75 characters are permitted for the PC-UI ( COM_PRODUCT_CUSTMSG 022 )
Attribute value &1 contains invalid special characters ( COM_PRODUCT_CUSTMSG 026 )
No set type is available for table &1 ( COM_PRODUCT_SERVICE 000 )
Storage form of product ID not yet defined in Customizing ( COM_PRODUCT_SETTINGS 000 )
Product ID is longer than the Customizing setting allows ( COM_PRODUCT_SETTINGS 001 )
Enter a shorter ID; product ID must have the format & ( COM_PRODUCT_SETTINGS 002 )
Product ID entered does not have the format & ( COM_PRODUCT_SETTINGS 003 )
No storage form defined for product type & / logical system & ( COM_PRODUCT_SETTINGS 006 )
Product ID could not be transferred because it has more than & characters ( COM_PRODUCT_SETTINGS 007 )
Numerical product IDs already exist ( COM_PRODUCT_SETTINGS 009 )
Product ID contains invalid special characters ( COM_PRODUCT_SETTINGS 011 )
Internal error converting product ID & ( COM_PRODUCT_SETTINGS 012 )
No storage form for product type &/object family &/logical system & ( COM_PRODUCT_SETTINGS 013 )
No product ID determined for material number & of logical system & ( COM_PRODUCT_SETTINGS 015 )
Product ID & has an invalid format ( COM_PRODUCT_SETTINGS 016 )
Assignment of product taxes inconsistent for country & ( COM_PRODUCT_TAX 009 )
A tax group already exists for country & (and region &) ( COM_PRODUCT_TAX 015 )
No assignment for country &1 (region &2)/tax type &3/tax group &4 ( COM_PRODUCT_TAX 028 )
Assignment of tax data for product &1 in country &2 not unique ( COM_PRODUCT_TAX 029 )
Note 454249 for table &2 country &1 ( COM_PRODUCT_TAX 033 )
Tax assignment not possible for country &1, sequence &2, value &3 ( COM_PRODUCT_TAX 038 )
Assignments to templates changed: Follow-up activities necessary ( COM_PRODUCT_TFW 017 )
Mini-template type &1 is not assigned to a product component ( COM_PRODUCT_TFW 023 )
Error in set type &1 when the product details screen is initialized ( COM_PRODUCT_UI 000 )
No description exists for set type & in language & ( COM_PRODUCT_UI 007 )
Conversion factors are greater than 99999 or exponent is not equal to 0 ( COM_PRODUCT_UNIT 010 )
& cannot be used as alternative UoM; resulting unit would be too long ( COM_PRODUCT_UNIT 011 )
Alternative units of measure are inconsistent; correct the values ( COM_PRODUCT_UNIT 014 )
& is not a unit of measure ( COM_PRODUCT_UNIT 015 )
Unit of measure &1 is not allowed for the product ( COM_PRODUCT_UNIT 016 )
No units of measure found for the product ( COM_PRODUCT_UNIT 022 )
Net weight of alternative unit of measure calculated automatically ( COM_PRODUCT_UNIT 033 )
GTIN &1 must be exactly 14 characters long ( COM_PRODUCT_UNIT 202 )
GTIN &1 contains invalid characters ( COM_PRODUCT_UNIT 205 )
GTIN &1 does not have a unit of measure ( COM_PRODUCT_UNIT 208 )
No configurable product exists for product variant & ( COM_PRODUCT_VARIANTS 003 )
Transaction COMMPR03 is obsolete (see long text) ( COM_PRODUCT_VIEW 004 )
Transaction COMMPR05 is obsolete (see long text) ( COM_PRODUCT_VIEW 005 )
Save not possible ( COM_PRODUCT_WB_UI 003 )
Object cannot be saved due to serious processing errors ( COM_PRODUCT_WB_UI 004 )
You do not have authorization for objects in product maintenance ( COM_PRODUCT_WB_UI 021 )
You are not authorized to change objects of this object type ( COM_PRODUCT_WB_UI 022 )
Product &1 is an accessory of product &2 ( COM_PRODUCT_WB_UI 033 )
Relationship type &1 is one-way; choose a direction ( COM_PRODUCT_WB_UI 051 )
Obj.type &1 corresponds to neither source nor destination in rel.type &2 ( COM_PRODUCT_WB_UI 052 )
Object type &1 does not correspond to source object type in rel. type &2 ( COM_PRODUCT_WB_UI 053 )
Obj. type &1 does not correspond to destination obj. type in rel. type &2 ( COM_PRODUCT_WB_UI 054 )
Subscreen &1 &2 is already used for relationship type &3 ( COM_PRODUCT_WB_UI 055 )
More than & products found; display limited to & ( COM_PRODUCT_WB_UI 103 )
Object &1: Only structured products can be loaded ( COM_PROD_EXCHANGE 008 )
& & & & ( COM_PROD_EXCHANGE 051 )
Description of language '&1' is missing in &2 ( COM_PROD_EXCHANGE 052 )
&1 in language '&2': &3 <> &4 ( COM_PROD_EXCHANGE 053 )
Unit of measure '&1' is missing in &2 ( COM_PROD_EXCHANGE 054 )
&1 of unit of measure '&2': &3 <> &4 ( COM_PROD_EXCHANGE 055 )
GTIN '&1' is missing in &2 ( COM_PROD_EXCHANGE 056 )
&1 of GTIN '&2': &3 <> &4 ( COM_PROD_EXCHANGE 057 )
Taxes of country '&1' are missing in &2 ( COM_PROD_EXCHANGE 058 )
&1 for country '&2': &3 <> &4 ( COM_PROD_EXCHANGE 059 )
Distribution chain '&1' is missing in &2 ( COM_PROD_EXCHANGE 060 )
&1 in distribution chain '&2': &3 <> &4 ( COM_PROD_EXCHANGE 061 )
&1 in language '&2' is missing in &3 ( COM_PROD_EXCHANGE 062 )
Category of application '&1' is missing in &2 ( COM_PROD_EXCHANGE 064 )
Category of application '&2': &3 <> &4 ( COM_PROD_EXCHANGE 065 )
&1: &3 <> &4 ( COM_PROD_EXCHANGE 070 )
Two different product type exist in one message ( COM_PROD_IOBJ 000 )
Set type and object family have different product types ( COM_PROD_OBJFAM 000 )
Category and object family have different product types ( COM_PROD_OBJFAM 002 )
ID can have &1 characters only ( COM_SCHEME 005 )
No attribute data found for set type & ( COM_SETTYPE_PME 000 )
No customer attributes could be found for conversion ( COM_SETTYPE_UPDA_20C 001 )
Internal error occurred when reading attribute &1 (&2 &3) ( COM_SETTYPE_UPDA_20C 003 )
Could not convert attribute &1 (&2 &3) ( COM_SETTYPE_UPDA_20C 004 )
No customer set types could be found for conversion ( COM_SETTYPE_UPDA_20C 021 )
Internal error occurred when reading set type &1 (&2 &3) ( COM_SETTYPE_UPDA_20C 023 )
Internal error occurred when reading product type information ( COM_SETTYPE_UPDA_20C 024 )
Could not convert set type &1 (&2 &3) ( COM_SETTYPE_UPDA_20C 026 )
No set type exists in table COMM_FRGTYPE for the value &1 ( COM_SET_ATTRIBUTE 001 )
Entry &2 &3 &4 missing in table &1 ( COM_SE_SEARCH 001 )
Error during dynamic call of method ( COM_SE_SEARCH 005 )
The business object &2 &3 is currently being indexed by user &1 ( COM_SE_SEARCH 013 )
No spool list exists for the selected line ( COM_SE_SEARCH 023 )
Currently you not need to trigger a flush to process any of the queues ( COM_SE_SEARCH 034 )
Exception triggered without error message assignment ( COM_SE_SEARCH 037 )
Check the Customizing for business objects ( COM_SE_SEARCH 039 )
An error occured for the business object &1 &2 ( COM_SE_SEARCH 041 )
The required index has not been created yet in the search engine ( COM_SE_SEARCH 044 )
Business object &1 does not support relations ( COM_SE_SEARCH 050 )
The Business Object &1 &2 is enabled for Embedded Search ( COM_SE_SEARCH 072 )
SES does not support this function for Business Object &1 (see longtext) ( COM_SE_SEARCH 075 )
SES does not support this function for Business Objects (see longtext) ( COM_SE_SEARCH 076 )
The Business Object &1 &2 is enabled for Embedded Search ( COM_SE_SEARCH 093 )
Text object &1 not defined in SAPscript ( COM_TEXT 001 )
Text name missing ( COM_TEXT 002 )
Error in calling function module &1 ( COM_TEXT 003 )
Invalid parameters for calling form &1 in program &2 ( COM_TEXT 004 )
Text object missing ( COM_TEXT 005 )
Text type &1 not in text determination procedure &2 of text object &3 ( COM_TEXT 008 )
Text type &1 in text det. procedure &2 of text object &3 read dynamically ( COM_TEXT 009 )
Text type &1 in text det. proc. &2 of text object &3 for display only ( COM_TEXT 010 )
Obligatory text '&' not maintained ( COM_TEXT 011 )
Structure &1 could not be found ( COM_TEXT 012 )
Unknown function code '&' ( COM_TEXT 013 )
Unknown screen number '&' ( COM_TEXT 014 )
Enter the language ( COM_TEXT 201 )
Text contains formatting (see detail screen) ( COM_TEXT 202 )
Text object &1 does not exist ( COM_TEXT_CUST 001 )
Error during program execution ( COM_TEXT_CUST 002 )
Table/structure &1 not available ( COM_TEXT_CUST 007 )
Field &2 not available in table &1 ( COM_TEXT_CUST 008 )
Field category &3 of field &2 for table &1 not allowed ( COM_TEXT_CUST 009 )
Key structure &1 still used for &2 / &3 / &4 ( COM_TEXT_CUST 010 )
Communication structure &1 still used for &2 / &3 / &4 ( COM_TEXT_CUST 011 )
Access sequence &4 still used in &1 / &2 / &3 ( COM_TEXT_CUST 012 )
Object &1 not yet referenced for &2 / &3 / &4 ( COM_TEXT_CUST 013 )
Value should be numeric ( COM_TEXT_CUST 022 )
&1 field &2 has an invalid category ( COM_TEXT_CUST 114 )
Display mode only for dynamically read texts ( COM_TEXT_CUST 127 )
Dynamically read texts may not be mandatory texts ( COM_TEXT_CUST 128 )
Referenced text object &1 not available ( COM_TEXT_CUST 139 )
Text object &1: Saving in processing via SAP script interface ( COM_TEXT_CUST 159 )
TExt object &2: No explicit saving in SAP script interface ( COM_TEXT_CUST 160 )
Reference object, text ID and function module contain a value ( COM_TEXT_CUST 161 )
Reference or function module contain a value ( COM_TEXT_CUST 162 )
Function module &1 is not active ( COM_TEXT_CUST 164 )
Internal error ( COM_TEXT_CUST 165 )
Text type in the schema is inconsistently defined ( COM_TEXT_CUST 166 )
Function modules: &2 Parameter &1 is defined differently ( COM_TEXT_CUST 167 )
Function modules: &2 Parameter &1 is an obligatory parameter ( COM_TEXT_CUST 168 )
Function modues: &2 Parameter &1 is missing ( COM_TEXT_CUST 169 )
Selection only useful for an individual text object ( COM_TEXT_CUST 170 )
Either select a text object or set 'All Text Objects' ( COM_TEXT_CUST 172 )
Restrictions for text determination proc. and access sequences are reset ( COM_TEXT_CUST 173 )
Key structure (length &1) too long for log (maximum &2) ( COM_TEXT_CUST 174 )
You should only use simple criteria for field &1 ( COND_API 003 )
Field &1 checked - there is an error ( COND_API 201 )
Scales cannot currently be checked ( COND_API 202 )
Scales copied without being checked ( COND_API 203 )
The validity period of record &1 has been overwritten ( COND_API 216 )
"Valid from" is ignored ( COND_SRV 001 )
"Valid to" date is ignored ( COND_SRV 002 )
Missing implementation for COND_USAGE_BADI ( COND_SRV 100 )
Configuration data for purchasing document item copied ( CONF_IN_PURCH 004 )
You are processing an invent.-managed item that is not handled in batches ( CONF_IN_PURCH 005 )
Configuration for &1 from sales doc. &2, item &3, adopted ( CONF_IN_PURCH 006 )
Not possible to display (item has not yet been configured) ( CONF_IN_PURCH 011 )
Internal error (Please contact your system administrator) ( CONF_IN_PURCH 013 )
Configuration not possible for material &1 ( CONF_IN_PURCH 014 )
Leave unit of measure for calculation type &1 empty. ( CONNECT_PRC_SAPCND 004 )
Unit of measure for calculation type &1 must be completed. ( CONNECT_PRC_SAPCND 005 )
Unit of measure &1 cannot be checked. ( CONNECT_PRC_SAPCND 006 )
Unit of measure &1 (for product) unknown. ( CONNECT_PRC_SAPCND 007 )
Unit of measure &1 not known. ( CONNECT_PRC_SAPCND 008 )
Unit of measure &1 is not a base unit of measure or order unit. ( CONNECT_PRC_SAPCND 009 )
Condition amount symbol must be positive ( CONNECT_PRC_SAPCND 014 )
Scale amount is not increasing. ( CONNECT_PRC_SAPCND 015 )
Scale amount is not decreasing. ( CONNECT_PRC_SAPCND 016 )
Dimension of the unit of measure &1 does not fit with calc. type &2. ( CONNECT_PRC_SAPCND 017 )
Two identical scale levels exist in dimension &1 ( CONNECT_PRC_SAPCND 020 )
Field &1 in table &2 does not correspond to database contents. ( CONNECT_PRC_SAPCND 024 )
The first scale level of scale &1 must have value &2. ( CONNECT_PRC_SAPCND 025 )
There are two scale lines with the same scale levels. ( CONNECT_PRC_SAPCND 026 )
There is more than one calculation type in EVL scale table. ( CONNECT_PRC_SAPCND 033 )
More than one calculation type available in the VAL scale table ( CONNECT_PRC_SAPCND 044 )
Currency differs in two scale rows (&1 and &2) ( CONNECT_PRC_SAPCND 046 )
Price unit differs in two scale rows (&1 and &2) ( CONNECT_PRC_SAPCND 047 )
Unit of measure differs in two scale rows (&1 and &2) ( CONNECT_PRC_SAPCND 048 )
Calculation differs in two scale rows (&1 and &2) ( CONNECT_PRC_SAPCND 049 )
Cannot use hierarchical access with &1 (see long text) ( CONNECT_PRC_SAPCND 056 )
Customizing may not be deleted in the current client ( CONNECT_PRC_SAPCND 309 )
IPC currently not available ( CONNECT_PRC_SAPCND 501 )
Own maintenance dialog available for condition types for pricing ( CONNECT_PRC_SAPCND 503 )
Invalid Control Name ( CONTROL_COMPOSER_MSG 004 )
No log exists for this selection. See long text ( CONT_TOOLS 005 )
The activation job with object &1, &2 has been cancelled. See longtext ( CONT_TOOLS 006 )
Object &1 successfully deleted. Write object to a job ( CONT_TOOLS 022 )
The object is in the data flow &1 (&2). However collection failed ( CONT_TOOLS 111 )
&1(&2) is in the data flow of &3(&4) although it is not being delivered ( CONT_TOOLS 112 )
BCT: &1 (&2) is newer in the A version than in the D version ( CONT_TOOLS 113 )
More than one GUID exists for the query (see long text) ( CONT_TOOLS 114 )
Incorrect selection. A syntax check is not possible ( CONT_TOOLS 116 )
There is no active table &1. ODS is most likely inactive. ( CONT_TOOLS 117 )
BCT: InfoObject cannot be activated because of data in the ODS or cube ( CONT_TOOLS 201 )
BCT: Object cannot be activated: Table has to be converted ( CONT_TOOLS 202 )
BCT: Error occurred when checking the update rules ( CONT_TOOLS 281 )
BCT: Missing unit of measure (see SAP Note 400217) ( CONT_TOOLS 282 )
BCT: Missing data target or data source ( CONT_TOOLS 283 )
BCT: Additional information required on the cause of the error ( CONT_TOOLS 284 )
BCT: Procedure for collection errors ( CONT_TOOLS 285 )
BCT: ISMP ... refers to invalid object 'IOBJ::' ( CONT_TOOLS 301 )
BCT: InfoSet cannot be activated because objects have been changed ( CONT_TOOLS 331 )
Check category SND. No D version available ( CONT_TOOLS 501 )
Check category SNA. No A version available ( CONT_TOOLS 502 )
Check category SDA. D version is newer than A version ( CONT_TOOLS 503 )
Check category SAD. A version is newer than the D version ( CONT_TOOLS 504 )
Check category COT. Objects saved temporarily ( CONT_TOOLS 505 )
Check category CCE. Collection error ( CONT_TOOLS 506 )
Check category ARL. Roles contain objects that do not exist ( CONT_TOOLS 507 )
Check category ANC. Naming conventions have not been observed ( CONT_TOOLS 508 )
Check category AIC. InfoObject does not have an InfoObject catalog ( CONT_TOOLS 509 )
Check category ADG. Query elements have duplicated GUIDs ( CONT_TOOLS 510 )
Check category ABI. Routines have references to BW DDIC structures ( CONT_TOOLS 511 )
Check category ATA. Transfer structure is not active ( CONT_TOOLS 512 )
Check category IOD: InfoObject &1 was deleted ( CONT_TOOLS 601 )
Check category IAD: InfoObject &1, attribute &2 was deleted ( CONT_TOOLS 602 )
Check category IRD: InfoObject &1, reference to InfoObject &2 was deleted ( CONT_TOOLS 603 )
Check category IRN: InfoObject &1, reference to InfoObject &2 was created ( CONT_TOOLS 604 )
Check category IRC: InfoObject &1, reference was changed from &2 to &3 ( CONT_TOOLS 605 )
Check category ICN: InfoObject &1, new compounding to InfoObject &2 ( CONT_TOOLS 606 )
Check category ICC: InfoObject &1, order of compounding changed ( CONT_TOOLS 607 )
Check category IDC: InfoObject &1, data type changed form &2 to &3 ( CONT_TOOLS 608 )
Check category IKT: InfoObject &1, key figure type changed from &2 to &3 ( CONT_TOOLS 609 )
Check category IDK: InfoObject &1, key figure data type &2 changed to &3 ( CONT_TOOLS 610 )
Check category IUN: InfoObject &1, currency/unit changed from &2 to &3 ( CONT_TOOLS 611 )
Check category IAT: InfoObject &1, aggregation type &2 changed to &3 ( CONT_TOOLS 612 )
Check category ITD: InfoObject &1, text tables was deleted ( CONT_TOOLS 613 )
Check category ITL: InfoObject &1, language dependency was deactivated ( CONT_TOOLS 614 )
Check category ITT: InfoObject &1, time dependency was deactivated ( CONT_TOOLS 615 )
Check category ITC: InfoObject &1, lower-case allowance was deactivated ( CONT_TOOLS 616 )
Check category ICR: InfoObject &1, compounding to &2 replaced with &3 ( CONT_TOOLS 617 )
Check category ICD: InfoObject &1, compounding to &2 was deleted ( CONT_TOOLS 618 )
Check category ILC: InfoObject &1, data type length changed from &2 to &3 ( CONT_TOOLS 619 )
Check &1, &2 Errors, &3 Warnings ( CONT_TOOLS_E 001 )
The object &2 (&1) couldn´t be collected for object &3. ( CONT_TOOLS_E 006 )
The object &2 (&1) is stored localy ($TMP) (see long text) ( CONT_TOOLS_E 007 )
The job &1 is not maintained for BI Content Checks. ( CONT_TOOLS_E 021 )
There is no message available for this object. ( CONT_TOOLS_E 101 )
There is no message available in the message ODS. ( CONT_TOOLS_E 102 )
The Short text of the Query Element is &1 ( CONT_TOOLS_E 153 )
GUID of the Routine &1 is &2 (see long text for details) ( CONT_TOOLS_E 154 )
Transport request &1 has been changed since the last check run. ( CONT_TOOLS_E 156 )
This selection is not supported. ( CONT_TOOLS_E 157 )
The selected job name &1 does not exist. ( CONT_TOOLS_E 161 )
Please schedule the check reports first. ( CONT_TOOLS_E 163 )
Connection to RFC destination &1 failed. ( CONT_TOOLS_E 164 )
The customizing for job &1 is not correct maintained. ( CONT_TOOLS_E 165 )
The field &2 in Comm: Structure &1 is not assigned to any InfoObject. ( CONT_TOOLS_E 216 )
The InfoObject &1 doesnt use Alpha conversion in the InfoSource &2. ( CONT_TOOLS_E 221 )
The routine &1 refers to a BW DDIC structure in line &2. ( CONT_TOOLS_E 231 )
The &3 object &2 is assigned to a role &1 and &2 doesn't exist. ( CONT_TOOLS_E 236 )
The transfer structure &1 has a field change in basis release &2. ( CONT_TOOLS_E 241 )
Longtext for &1 object &4 is not availible. ( CONT_TOOLS_E 261 )
Longtext for &1 object &4 is identical to technical name. ( CONT_TOOLS_E 262 )
No entry in corresponding texttable for &1 object &4. ( CONT_TOOLS_E 263 )
The Object &1(&2) is stored as a local object. ( CONT_TOOLS_E 266 )
Data Transfer method for the Object &1(&2) is not specified. ( CONT_TOOLS_E 271 )
The Datasource &1(release &3) doesnt have a Transfer Structure. ( CONT_TOOLS_E 276 )
No Entry in shadow table for the DataSource &1 of source system &2. ( CONT_TOOLS_E 281 )
Aggregation is not equal to 'SUM' for the InfoObject &1. ( CONT_TOOLS_E 282 )
No Text DataSource is mapped to InfoObject &1. ( CONT_TOOLS_E 291 )
No Hierarchy DataSource is mapped to InfoObject &1. ( CONT_TOOLS_E 292 )
No Masterdata DataSource is mapped to InfoObject &1. ( CONT_TOOLS_E 293 )
No Text and Hierarchy DataSource is mapped to InfoObject &1. ( CONT_TOOLS_E 294 )
No Text and Masterdata DataSource is mapped to InfoObject &1. ( CONT_TOOLS_E 295 )
No Masterdata and Hierarchy DataSource is mapped to InfoObject &1. ( CONT_TOOLS_E 296 )
No Text, Hierarchy and Masterdata DataSource is mapped to InfoObject &1. ( CONT_TOOLS_E 297 )
Transformation is not available for object &1 with sourcename &2. ( CONT_TOOLS_E 311 )
Transformation not available with sourcesys sourcename &1 & targetname &2 ( CONT_TOOLS_E 312 )
Transformation &1 has no corresponding Source &2 or target &3 in 'D' vers ( CONT_TOOLS_E 313 )
Transformation &1 has no corresponding Source &2 or target &3 in 'A' vers ( CONT_TOOLS_E 314 )
Object &1 is reusable object ( CONT_TOOLS_E 322 )
Not all resources available: Job will be started later ( CONV 101 )
Original file no longer exists in document ( CONV 114 )
BOMs cannot currently be locked: Job will be restarted later ( CONV 117 )
Start writing the transformation matrices ( CONV 118 )
Finished converting original application file or assembly &1 ( CONV 124 )
Windows NT does not support file storage &1 ( CONV 126 )
&1 original application files can be converted ( CONV 130 )
Two original application files are already checked in. ( CONV 133 )
The converter &1 does not exist in table "CONVERTER" ( CONV 134 )
Connection error to RFC destination &1 ( CONV 135 )
Family tables are not currently supported ( CONV 137 )
Cannot delete directory &1&2&3 on the conversion server ( CONV 138 )
Conversion &1 does not exist ( CONV 150 )
Convesion process ended with status &4 ( CONV 151 )
Time limit (transformation matrices) expired ( CONV 152 )
Time limit (converter or documents) expired. Document: &1 ( CONV 153 )
All converters &1 for this conversion are not available at this time ( CONV 154 )
Incorrect program in RFC Destination in CONVERTER-CONV_UTIL_DEST ( CONV 163 )
Incorrect program in RFC Destination in CONVERTER-CONV_DEST ( CONV 164 )
Incorrect program in RFC destination in CONVERTER-FTP_DEST ( CONV 172 )
Incorrect program in RFC destination in CONVERTER-HTTP_DEST ( CONV 173 )
No authorization to release job &1. Release cancelled. ( CONV 175 )
Error while changing the BOM (transformation matrix) ( CONV 198 )
Warning when changing the BOM (transformation matrix) ( CONV 199 )
No document assigned to the header of the BOM ( CONV 200 )
No documents/transformation matrices found for the BOM ( CONV 201 )
No conversion specification for converting this assembly ( CONV 202 )
The conversion for this assembly was started with &1 ( CONV 203 )
No conversion specification for converting this document ( CONV 204 )
Conversion started with &3 ( CONV 205 )
The return value of the system command for starting the converter is &1 ( CONV 211 )
Error message from converter: &1&2&3&4. ( CONV 212 )
Neither ConvPath.txt nor ConvPathAndMatrix.txt were created. ( CONV 213 )
Error while reading file &1&2&3&4 ; Line too short ( CONV 215 )
Error while starting command: &1&2&3&4 ( CONV 221 )
The RFC Server you started is not responding ( CONV 222 )
No CORBA conversion server &1 is running ( CONV 230 )
Update type does not exist: &1 ( CONVERT_OTC 101 )
Create the accounting view for material &1 in plant &2 ( CON_ACC_MATERIAL 100 )
Error in INVENTORY journal ( CON_ACC_PRICE 004 )
Base quantity for price is too large or contains decimal places ( CON_ACC_PRICE 005 )
Caution: G/L account and secondary cost element have the same number ( CON_FIN_ACCE 007 )
Comp. code &1: change of local currencies, please adjust posted data ( CON_FIN_ACCE 010 )
Comp. code &1: change of local currencies, please adjust Inventory Acctg ( CON_FIN_ACCE 011 )
Internal error: unallowed access to inventory accounting ( CON_FIN_ACCE 012 )
Internal error while building document structure for Inventory Accounting ( CON_FIN_ACCE 201 )
Inventory Accounting active: Vendor billing documents not supported ( CON_FIN_ACCE 202 )
INV active: Price/exch. rate diff. in invoice verification not supported ( CON_FIN_ACCE 203 )
Read structure for RWIN structure inconsistent ( CON_FIN_ACCE 251 )
Posting key missing for transaction key &1, D/C indicator &2 ( CON_FIN_ACCE 254 )
Posting string &1 does not exist (T156W) ( CON_FIN_ACCE 255 )
Internal error in zero balance check ( CON_FIN_ACCE_01 000 )
Error in configuration of Inventory Accounting ( CON_FIN_ACCE_01 301 )
Object &1 / &2 does not exist ( CON_FIN_ACCE_01 303 )
Company code missing in object &1 / &2 ( CON_FIN_ACCE_01 304 )
Plant or purchasing document missing in object &1 / &2 or &3 / &4 ( CON_FIN_ACCE_01 305 )
Error while deriving document number in inventory ledger ( CON_FIN_ACCE_01 306 )
Error in transfer of prima nota number ( CON_FIN_ACCE_01 307 )
Enter only single values for the controlling area ( CON_FIN_ACCE_01 701 )
Error while extracting AC documents: configuration not activated ( CON_FIN_ACCE_01 702 )
Error while determining partner object for accounting documents ( CON_FIN_ACCE_01 703 )
Error while determining actual version for accounting documents ( CON_FIN_ACCE_01 704 )
Error while determining valuation view for accounting documents ( CON_FIN_ACCE_01 705 )
Error while determining value type for accounting documents ( CON_FIN_ACCE_01 706 )
Error while extracting quantities from accounting documents ( CON_FIN_ACCE_01 707 )
Error while extracting values from accounting documents ( CON_FIN_ACCE_01 708 )
Error while determining order number ( CON_FIN_ACCE_01 710 )
Error while determining material being produced ( CON_FIN_ACCE_01 711 )
Error while determining accounting system ( CON_FIN_ACCE_01 712 )
Error in configuration of Inventory Accounting ( CON_FIN_ACCE_01 801 )
Error in configuration of Inventory Accounting ( CON_FIN_ACCE_01 802 )
Controlling area & does not exist ( CON_FIN_ACCE_01 803 )
Error in configuration of Inventory Accounting ( CON_FIN_ACCE_01 804 )
Error in configuration of Inventory Accounting ( CON_FIN_ACCE_01 805 )
Inventory Accounting not active in controlling area &1 ( CON_FIN_ACCE_01 806 )
Error in configuration of Inventory Accounting ( CON_FIN_CALC 001 )
No inventory price update possible with costing run &1/&2 ( CON_FIN_CALC 101 )
No allowance for price update in plant &1 ( CON_FIN_CALC 102 )
No allowance for price update ( CON_FIN_CALC 103 )
Price update for "costing date from" &1 no longer possible ( CON_FIN_CALC 104 )
Price update for period &1/&2 no longer possible ( CON_FIN_CALC 105 )
You cannot release the costing run in company code & ( CON_FIN_CALC 106 )
Cost component view &1 does not exist ( CON_FIN_CALC 107 )
Price type &1 does not exist ( CON_FIN_CALC 109 )
Price type &1 and costing type &2 have different time bases ( CON_FIN_CALC 110 )
Costing variant &1 cannot update price type &2 ( CON_FIN_CALC 111 )
Costing variant &1 cannot update prices with price type &3 ( CON_FIN_CALC 114 )
Error while updating prices in price table ( CON_FIN_CALC 118 )
Cost component split in controlling area currency missing ( CON_FIN_CALC 126 )
Update for material &1 in plant &2 not possible ( CON_FIN_CALC 127 )
Valuation unit of measure for material &1 in plant &2 was changed ( CON_FIN_CALC 128 )
Costing variant &1 cannot update prices with price type &3 ( CON_FIN_CALC 129 )
Costing variant &1 cannot update prices ( CON_FIN_CALC 130 )
Cost estimate was already used for price update &3 ( CON_FIN_CALC 131 )
Price already updated by other cost estimate ( CON_FIN_CALC 132 )
Cost estimate has errors ( CON_FIN_CALC 133 )
Cost estimate already updated price type &3 ( CON_FIN_CALC 137 )
Order &1 not allowed for account assignment ( CON_FIN_CO 001 )
Account assignment not allowed ( CON_FIN_CO 006 )
Order &1 not allowed for account assignment ( CON_FIN_CO 008 )

Length: 641114 Date: 20140901 Time: 153944

Count: 2402     sap01-206 ( 1611 ms ) This documentation is copyright by SAP AG.

consolut Transport Check

The consolut Transport Check is a simple and reliable tool that helps you identify dependencies between transport orders.

consolut Transport Check