OS/400 Messages

Are you looking for the description of OS/400 (System i) messages e.g. CPF9801? Then you have come to the right place. Below you can see a (hoefully) complete list of of all OS/400 messages with all "second level texts".

 

Complete OS/400 Messages Documentation From CPI0307 up to CPIE002

This documentation is copyright by IBM.
Count: 4630 Skipped: 0
OS/400 Messages
Description
COPYRIGHT command ignored.
Character CL variable declared for datalink &1.
Program &1 created in library &2 on &3 at &4.
Character CL variable declared for large object (LOB) &1.
Module &1 created in library &2 on &3 at &4.
Character CL variable declared for DBCS field &1.
Installed main storage less than recommended.
&6M of &7M for shared pool &5 allocated.
Pending system name now current system name.
Accounting data not being journaled.
Operating system cannot be serviced.
*ATTENTION* Controlling subsystem &1 should be started.
User not authorized to change system value &1.
Restore shipped objects into QGPL.
Request to change storage pool allocation failed.
Network attributes have been restored from the medium.
QSYSSBSD in QSYS library will be used.
Some network attributes have not been restored.
Backup job description will be used for job &3/&2/&1.
QSYSSBSD in QSYS library will be used.
Program specified will not be run.
Network attributes have been initialized. Reason &1.
Network attributes may or may not have changed.
Some network attributes reset during IPL.
Automatic IPL may not have occurred.
Backup class used for job.
Default output queue used for job.
Subsystem does not end with other jobs on device.
Previous ending abnormal, reason code &1.
Double IPL for PTF apply failed, reason code &1.
PWRDWNSYS &1 command in progress.
Error occurred on disk unit &1.
No pool definitions
No autostart job entries
No work station name entries
No work station type entries
No job queue entries
No routing entries
No communications entries
No remote location name entries
No active jobs to display
Shared member locks option valid only for logical files.
Job has no locks
File has no member locks
Member has no shared locks
Job is not active.
Member damaged, cannot obtain shared member locks.
No call stack
The object being displayed has been deleted.
Object damaged, see job log for more information.
Press F6 to see member locks.
Thread has no locks
There are no locks for the specified object
Member damaged, cannot obtain shared member locks.
Member has no shared locks
No group jobs to display.
No jobs to display
Mirrored protection is suspended on disk unit &1.
Mirrored protection is suspended on disk unit &1.
Mirrored protection is suspended on disk unit &1.
Mirrored protection is suspended on disk unit &1.
Mirrored protection suspended on disk unit &1.
Job &3/&2/&1 lost.
Storage unit now available.
No prestart job entries
Start of prestart jobs in progress.
ASP &5 storage threshold reached.
Storage limit exceeded for ASP &1.
System ASP unprotected storage limit exceeded.
Mirrored protection suspended on disk unit &1.
Mirrored protection suspended on disk unit &1.
Mirrored protection suspended on disk unit &1.
Mirrored protection suspended on disk unit &1.
IASP &1 mirror copy storage threshold reached.
Geographic mirroring for IASP &1 has started flow control.
Geographic mirroring for IASP &1 has ended flow control.
Cross-site Mirroring (XSM) synchronization for IASP &1 is &2% complete.
Key lock is in wrong position for automatic IPL.
Uninterruptible power supply (UPS) no longer attached.
Uninterruptible power supply (UPS) now attached.
System on auxiliary power.
Weak battery condition exists.
Failure of battery backup feature in system unit.
Failure of the battery backup feature in expansion unit.
&1 description is damaged and will be deleted.
Attributes of &1 description changed after last IPL.
Console values lost.
Batch restricted state ended, reason code &4.
Geographic mirroring is suspended for IASP &1.
Geographic mirroring is still suspended for IASP &1.
Copy of IASP has been rejected.
Disk unit connection is missing.
Failure detected on Mirror Copy node.
Disk unit &1 not operating.
DST still has control of the console device.
End of prestart jobs in progress.
Weak battery condition no longer exists.
UPS has been bypassed.
UPS no longer bypassed.
Notification of message &1 failed.
Not all requested prestart jobs started.
System powered down previously.
System powered down previously.
System power restored at &3.
CPM recovery successful.
CPM recovery not successful.
Previous system shutdown successful.
Previous system shutdown not successful.
Load source disk unit not in valid location.
System powered down previously.
Automatic IPL not allowed.
&1 changed, but may be adjusted.
Function check during performance adjustment at IPL.
&1 subsystem description was not changed.
Interactive pool and QBASACTLVL were not changed.
Performance values were adjusted.
Main storage dump space not available.
Mirrored protection resuming on disk unit &1.
Mirrored protection resumed on disk unit &1.
Number of processors changed to &1.
Main storage size change to &1M in progress.
Main storage size changed to &1M.
QPWRDWNLMT is less than or equal to QENDJOBLMT.
Previous ending was abnormal because ENDJOBABN used.
QLUS job ended abnormally.
Errors occurred on disk unit &1.
Elapsed time can not be calculated.
System power is restored.
PWRDWNSYS command issued with parameters specified.
Error occurred on disk unit &1.
Nearly all available machine addresses used.
Error occurred on disk unit &1.
Storage directory threshold reached.
Main storage dump automatically copied.
Critical storage condition exists.
Critical storage lower limit reached.
System starting in storage restricted state.
Storage lower limit exit program error occurred.
PWRDWNSYS &1 command in progress.
Time zone description &1 changed but warnings exist.
Time zone description &1 created but warnings exist.
No time zone descriptions to display
Errors occurred while setting system value QTIMZON.
Partition suspend request in progress.
Partition not ready for suspend request.
Partition suspend request canceled.
Partition resumed after migration.
Partition resumed from hibernation.
Remove of disk unit from ASP &1 completed successfully.
Remove of disk unit from ASP &1 failed.
Records written to &5 of &6 members.
Active collection ended.
No selected interval data produced.
CRTPFRDTA waiting for next interval.
No data written to file &1.
Repository for category &1 empty.
Performance files moved from library &1 to &2
Collection Services active.
Collection Services server job (QYPSPFRCOL) cannot end.
Collection Services started with profile &1.
No registered applications to display
No properties to display
No application instances to display
No registered transactions to display
Short lifespan reporting threshold override not valid.
Internal failure in system.
System Resource Management internal object &1 failed to create.
Attempt to copy System Resource Management data failed.
System Resource Management internal objects not available.
Failure while attempting to initialize SRM internal objects.
System Resource Management object has been created.
Data missing in System Resource Manager.
Resource entry not valid.
Data typed not valid.
Service activity performed on System Resource Management data.
System Resource Management data could not be copied.
System Resource Management index is not correct.
Remove operation not allowed for resource &1.
Remove operation successful for resource &1.
Print operation completed successfully.
This resource can not be changed.
Option &1 not valid for specified resource.
Configuration description does not exist.
Output file operation completed successfully.
Configuration description can not be added.
Configuration description cannot be added.
Requested level of information is currently displayed.
Resource changes detected.
Work station controller &6 moved.
Storage I/O processor &6 moved.
Communications I/O processor &6 moved.
Storage device &6 moved.
Communications I/O Adapter &6 moved.
Work station controller &6 removed or failed.
Storage I/O processor &6 removed or failed.
Communications I/O processor &6 removed or failed.
Storage device &6 removed or failed.
Communications port &6 removed or failed.
Communications I/O adapter removed or failed
Internal failure in system.
Install device description &1 not found.
Install device description &1 not useable.
Install device description &1 could not be updated.
Local work station not operating.
Storage device not ready.
Work station controller &6 replaced.
Storage I/O processor &6 replaced.
Communications I/O processor &6 replaced.
Storage device &6 replaced.
Communications I/O adapter &6 replaced.
Internal failure in system.
Storage controller &6 removed or failed.
Unknown I/O processor &6 detected.
Combination I/O processor &6 moved.
Combination I/O processor &6 replaced.
Combination I/O processor &6 removed or failed.
Internal failure in system.
Communications input/output adapter &6 not operating.
Storage controller &6 not ready.
Communications port &6 not operating.
I/O processor &6 not operating.
Storage controller &6 moved.
Communications port &6 moved
Internal failure in system.
System resource manager database being initialized.
Input/output processor &6 not detected.
Description of file &1 in library &2 not saved.
File &1 in library &2 not created.
File &1 in library &2 cannot be allocated.
File &1 in library &2 deleted then created.
Creation of file &1 in library &2 failed.
File &1 in library &2 not deleted. Recovery stopped.
Main storage card &6 replaced.
Main storage card &6 removed or failed.
Bus adapter &6 replaced.
Bus adapter &6 removed or failed.
Communications channel &6 not operating.
Channel &6 moved
System type could not be determined.
SRM object has been converted.
Attempt to convert SRM data failed
Old resource name &1 has already been used.
Old resource name format or type not correct.
SRM database not restored.
Invalid duplicate serial number detected.
SRM data base processing has stopped.
An attempt to update the SRM database failed.
No updates made from the previous selection display.
Coupled adapter &6 not operating.
Coupled system adapter &6 removed or failed.
Possible update problem. QAUTOCFG = '1' (ON).
Change option not valid on this resource.
Machine programs were installed in machine area &1.
IPL from machine area &1.
Permanent changes installed in machine area &1.
Licensed product information not available.
Temporary PTFs installed in machine area &1.
Temporary PTFs removed from machine area &1.
Error retrieving LIC INT code data from machine area &1.
Error in module &1 return code &2.
Product &1 release &2&5 option &3 load &4 correctly installed.
Product &1 release &2 option &3 load &4 correctly packaged.
Product &1 release &2 option &3 load &4 only defined.
Product &1 release &2 option &3 load &4 only created.
Product cannot be completely checked.
*PRDAVL object &1 in library &2 not restored.
All product loads checked are only defined.
*PRDLOD for option &3 load &4 found for release &2.
Message text for product &1 not found.
Product &1 release &2 option &3 load &4 packaged successfully.
Language load object names not recommended.
No job schedule entries to display
Job schedule entry &3 change interrupted.
Damaged job schedule &1 in library &2 deleted.
Unexpected error detected in module &1.
Job not submitted for job schedule entry &3 number &4.
Job not submitted for job schedule entry &3 number &4.
Scheduled job &3/&2/&1 did not run.
Subsystem library list entry &3 cannot be allocated.
Subsystem library list entry &3 not added.
Subsystem library list entry &3 in library list.
Job &3/&2/&1 submitted.
Job &3/&2/&1 has not been active.
All jobs at work station &1 ended.
Job &3/&2/&1 is ending immediately.
User library list limited to 25 libraries.
ASP group &1 not used by the subsystem.
Subsystem library list entry &1 not added.
ASPGRP for SBSD not used for verification.
Job &3/&2/&1 is ending immediately.
CPI1131 Job &3/&2/&1 disconnected by user &4.
All jobs at work station &1 disconnected.
Subsystem &1 had an error on obtaining system values.
&1 changed, but may be adjusted.
Mirrored protection still suspended.
CCSID for the job changed from &1 to &2.
Storage overflow recovered for ASP &1.
Storage overflow recovery failed for ASP &1.
Activation group information not available
Job not submitted for job schedule entry &3 number &4.
Job not submitted for job schedule entry &3 number &4.
Job not submitted for job schedule entry &3 number &4 because the entry is held.
Job scheduling function not active. Job schedule &1 in library &2 not available.
Unexpected error occurred while processing scheduled job &3/&2/&1.
Job not submitted for job schedule entry &3 number &4.
Job &3/&2/&1 not waiting for a specific message.
User profile &1 not found.
System password bypass period ended.
System password bypass period will end in &5 days.
No system values to display
SRTSEQ for the job changed to *HEX.
Duplicate jobs found.
Auxiliary storage exceeds system limits.
System Unique Identifier will expire with &1 more installs.
Temporary system capacity activation period ends in &1 days; resource type &2.
Temporary system capacity activation period has ended; resource type &2.
Capacity on demand resources are not available for system use.
Capacity on demand resources are not available for system use.
&1 system capacity resources have not been reclaimed by the system; resource type &2.
Metered system capacity request period is active.
System Unique Identifier expired or not valid.
Unit &1 with device parity protection not fully operational.
Unit &1 with device parity protection not fully operational.
No hot spare disk units remain on I/O adapter.
Hot spare disk unit not operating.
One or more device parity protected units still not fully operational.
Units with device parity protection fully operational.
Temporary I/O processor error occurred.
Error occurred on disk unit &1.
Disk unit &1 not operating.
Mirrored protection suspended on the load source disk unit.
Mirrored protection still suspended on the load source disk unit.
Compressed disk unit &1 is full.
Server entry index &1 in library &2 damaged.
Mirrored protection has changed unit.
Hot spare disk unit not in valid location.
Damaged internal system object deleted.
Internal system object cannot be recovered.
Duplicate job &3/&2/&1 found.
Job is being traced.
Disk unit &1 replaced by hot spare disk unit.
Metered system capacity request period has ended.
Trial system capacity request period ends in &1 days; resource type &2.
Trial system capacity request period has ended; resource type &2.
PWRDWNSYS *IMMED command in progress.
PWRDWNSYS *IMMED command in progress.
System powered down previously.
An error occurred while processing the Attn key.
Internal system object is damaged.
Insufficient storage in machine pool to start job &3/&2/&1.
Subsystem &1 varied off device &3.
Start of job log server in progress.
Ending of job log server in progress.
Writing job log for &3/&2/&1.
Fewer server jobs started than number requested.
No job logs to display
Starting position 1 assumed for change from *ANY compare value.
Alert backup focal point not used.
Change effective next time subsystem starts.
Active jobs using previous values.
Active jobs using previous values.
Work station entry &1 updated, function code &2.
Job holds large number of locks.
System lock table nearing capacity.
System job tables nearing capacity.
System value &1 and &4 changed.
System job tables are full.
Library in initial library list not found.
Disk reorganization successfully started for ASP &1.
Disk reorganization for ASP &1 ended.
Disk reorganization started for all configured ASP's.
ASP balancing successfully started for ASP &1.
ASP balancing for ASP &1 ended.
ASP tracing successfully started for ASP &1.
ASP tracing for ASP &1 ended.
ASP tracing data successfully cleared for ASP &1.
Interactive activity has exceeded installed capacity.
User authorizations exceeded.
Nearly all available addresses for ASP &1 used.
System values &1 and &4 changed.
Save entry was not deposited for data area &1.
Print buffer overrun on device &9.
File label &8 exists on diskette. Diskette skipped.
Diskette formatted incorrectly. Diskette skipped.
Diskette full. Diskette skipped.
Diskette not initialized. Diskette skipped.
Diskette not coded in &8. Diskette skipped.
Diskette has extended label area. Diskette skipped.
VTOC read error for diskette. Diskette skipped.
Two-sided diskette required. Diskette skipped.
Resume or end allocation selection has completed.
Resume or end allocation selection failed.
Unit &1 is selected for end allocation.
No units are selected for end allocation.
Balancing type &1 is active for ASP &2 with name &3.
Balancing is not active for ASP &1 with name &2.
ASP tracing is active for ASP &1 with name &2.
ASP tracing is not active for ASP &1 with name &2.
Breakpoint received in secondary thread.
Breakpoint received in secondary thread.
Service Entry Point has stopped at line &1 in program &2 in job &3.
Message file needed for alert table &1.
The &1 job has not been started.
Course &1 already open.
Course &1 already closed.
Course information and modules cannot be changed.
Enrolled in saved audience path.
Audience path &1 has already been removed.
Course &1 has already been removed.
No associated files found in course
IBM i Online Education Student Bookmark Status Folder.
Student &1 enrollment has been changed.
Student record changed.
Course now available to students.
Course has been deleted.
No module list available
Cursor not in list field.
Student &1 has been enrolled.
No student list available
No course list available
No audience path list available
No category list available
All bookmarks removed.
There are no bookmarks to remove for this course.
Course &1, file &2 being converted.
No jobs to display for the specified user
No job queues to display for the specified user
Can only enter a Y or N.
User does not exist; enter the name again or press F4
User does not exist; no job queues to display
Job accounting journal created.
No printer output to display
No printer output waiting
No printers to display
Printer output not assigned to any printer
Number of copies must be 1 through 255.
Status must be 1 or 2.
Last page to print must be 1 through 99999 or *LAST.
First page to print must be 1 through 99999.
You are not authorized to see all libraries and folders.
Scheduled power off has been canceled.
Scheduled power off has been delayed until &4 on &3.
Cleanup has started.
Error submitting job &1.
Power off program, QEZPWROFFP, not found.
System not powered off at scheduled time.
Powering off of system close to power on.
Database files &1 and &2 created in library &3.
Database files &1 and &2 used from library &3
Function key &1 not allowed.
User name &1 does not exist.
No completed printer output to sort.
&1 is not a valid choice.
Cannot select more than one user.
Specified user name does not exist.
Could not send message to user &1.
Message sent. User &1 not signed on.
Message needs a reply field must be Y or N.
Interrupt user field must be Y or N.
Message text field cannot be blank.
Messages needing reply cannot be sent to *ALLACT.
Message sent to &1.
Enter name of user to send message to.
Press F10 to send message.
Cannot specify *ALL and other users.
Message not sent. No one else signed on.
Message successfully sent to all signed-on users.
Roll or page key cannot be used.
Printer output being created for problem &1.
Printer output &1 of &2 being created.
Processing Attn key...
Unable to send message to &1.
Backup options and library backup list created.
Folder backup list created.
&1 backup not successful or not complete (&2).
Library backup list reformatted.
Not authorized to run backup in batch
Not authorized to run backup interactively.
Backing up security data.
Backing up configuration.
Backing up user libraries.
Backing up folders.
Backing up calendars.
Backing up mail.
Backing up user directories.
Intermediate assistance level used.
No devices
&1 days used for problem log cleanup value.
&1 of &2 messages deleted from &3.
Cleanup of user messages started.
Cleanup of user messages successfully completed.
Cleanup of operator and work station messages started.
Cleanup of operator and work station messages successfully completed.
Cleanup of system journals and system logs started.
Cleanup of system journals and system logs successfully completed.
Cleanup of QSYSMSG message queue successfully completed.
User cleanup program started.
User cleanup program successfully completed.
Cleanup of job logs and other system output started.
Cleanup of job logs and other system output successfully completed.
Problem occurred when communicating cleanup status.
Job QPRTLIBRPT submitted.
Job QPRTFLRRPT submitted.
Job QPRTOBJRPT submitted.
Job QPRTOWNRPT submitted.
No users found for specified values. Press F14 to select users.
Backup schedule set to defaults.
Collected disk space information not complete.
Job QPRTSUMRPT submitted.
Collected disk space information not complete.
Disk space information not scheduled to be collected.
Specific date and time collection scheduled on &1, at &2.
Weekly collection scheduled on &1, &2, at &3.
Monthly collection scheduled on &1, &2, at &3.
Specific date and weekly collections scheduled.
Specific date and monthly collections scheduled.
Cannot find object to match specified name.
Object &1 type &2 deleted.
Object &1 type &2 deleted by RTVDSKINF.
Hierarchical file systems may need to be registered.
File system &1 has been registered.
User modifications to object &1 in library &3 type *&2 were lost.
Subsystem description &1 not customized.
Start of customization of descriptions.
End of customization of descriptions.
Start of operating system installation.
End of operating system installation.
CPI2085 - Installing data base files in library &1.
Entry &1 added to &2.
Entry &1 added to &2.
Subsystem description &2 conflicts with media version.
Job description &1 was not customized.
Entry &1 not added to &2.
Subsystem &1 not customized.
Job description &1 not customized.
Errors found customizing job description &1.
Errors found customizing subsystem description &1.
CPI2092 - Console not ready. Attempting recovery.
CPI2093 - Installing data base files in library &1.
CPI2094 - Operating system has been installed. IPL in progress.
Changing primary language not complete
CPI2096 - Deleting obsolete objects in library &1.
Storage limit for user profile &1 increased.
License information not processed during installation.
Job description &1 not customized.
Object &1 in &2 type *&3 created.
Object &1 in &2 has invalid type &3.
AUT and USRPRF parameter values were ignored.
&1 entries removed from library list
Journal inherit rules lost for library &1.
Recovery of library &1 successful.
Library &1 created.
Records of PTF activity for library &1 deleted.
Object attributes lost for some objects in library &1.
Ownership of library &1 transferred to QDFTOWN.
Storage limit exceeded for user profile &2.
Library &1 size exceeded system limit.
Information lost for some objects in library &1.
Object attributes lost for all objects in library &1.
Library &1 ownership transferred to QDFTOWN.
Library &1 OIR not in format for current release.
Library IPL cleanup failed.
Replaced object &1 type *&4 was moved to QTEMP.
AUT and USRPRF parameter values were ignored.
No objects to display.
Replaced object &1 type *&4 was moved to &5.
No libraries to display.
There are no objects to be displayed
Library list not available
Object &1 in &2 type *&3 not duplicated.
AUT parameter ignored.
Replaced object &2 type *&3 has been deleted.
Replaced object &2 type *&3 has been deleted.
Entry &1 changed to point to program &2 in &3.
No EPT entries
Authority given to user &4 for object &1 in &3 object type *&2.
Authority revoked from user &4 for object &1 in &3 object type *&2.
User &7 not authorized to *&5 &6/&4 when processing generic request.
Authority given to &1 objects. Not given to &2 objects. Partially given to &3 objects.
Authority revoked from &1 objects. Not revoked from &2 objects. Partially revoked from &3 objects.
GRPAUT value changed to *NONE.
GRPAUT and OWNER values changed because GRPPRF(*NONE) specified.
Defaults used for user profile &1 security information.
User profile &1 deleted because it was damaged.
MAXSTG value less than storage currently used.
Set password to expired value set to *NO.
There are no objects for this primary group.
&1 objects were not included in this list.
Option 8 is not allowed.
Path name is greater than 5000 characters.
Default security values used for user profile &1.
User &2 added to authorization list &1.
User &2 changed on authorization list &1.
User &2 removed from authorization list &1.
Authorization list &4 revoked from object.
Public authority for object &1 changed.
Authorization list securing object &1 changed.
Object secured by authorization list.
Authority *ALL or *AUTL revoked from *PUBLIC.
User profile &1 does not have all special authorities.
User profile &1 not found.
An internal system object associated with user profile &1 was found damaged and has been deleted.
&1 objects were not included in this list.
EIM association processing successful for user &1.
Set password to expired value set to *NO.
Deleting user profile.
User profile &1 is damaged.
Special authorities granted &2.
Special authorities for user &1 do not match default authorities for current security level.
User profile &1 *ALLOBJ authority removed.
User class and special authorities do not match system supplied values.
No objects are secured by this authorization list
There are no authorized users for this object.
User does not have specific authority to any commands.
User does not have specific authority to any devices.
User does not have specific authority to any objects.
User profile &1 is the primary group for directory objects that do not have links.
There are no server authentication entries for this user.
Start removing EIM associations for user &1.
End removing EIM associations for user &1.
EIM identifier created for user &1.
EIM identifier not created for user &1 because it already exists.
The user does not own any objects.
No authority holders exist.
Object &1 associated with its authority holder.
User profile &1 created during signon.
No objects of specified type adopt user profile.
User profile &1 owns objects that are not in a library.
Deleting owned objects.
Changing ownership of owned objects.
Searching for all owned objects for &1.
QAUDCTL system value changed to &1.
Changing primary group of objects.
User profile &1 is primary group for objects not in a library.
There are no members for this group.
*SECADM special authority required to see usage information
No function IDs found
No user profiles have usage information
Not allowed to change password.
Object &1 in &2 type *&3 cannot be deleted.
Ownership of &1 in &2 type *&3 cannot be changed.
Object &1 in library &2 not found.
&1 objects secured by authorization list QRCLAUTL.
Object &1 type *&2 in library &3 secured by QRCLAUTL.
User &29 not authorized to object &21/&20 type &22.
Domain violation by program &27 for object &20.
User &16 not authorized to user profile &29 during job submission or job scheduling.
Sign-on requested using default user profile &29.
Validation check failed for object &21/&20 object type &22.
Password entered by user &20 from device &21 not valid.
User ID &20 entered from device &21 not valid.
Authority for object &21/&20 type &22 changed by user &16.
Ownership of object &21/&20 type &22 changed to &24 by user &16.
Program &21/&20 changed to adopt owning user profile &23.
System value or service attribute &20 changed by user &16.
Network attribute &20 changed by user &16.
Restored program &21/&20 adopts owning user profile.
Restored job description &21/&20 contains user name &23.
Object &21/&20 type &22 restored. Owner changed to user &24.
Object &21/&20 type &22 restored. Object authority changed.
Authority restored for user profile &21/&20 type &22.
Object &21/&20 object type &22 deleted by user &16.
Job description &21/&20 contains user profile &25.
Routing entry changed for &21/&20 type &22 sequence number &25.
User profile &21/&20 type &22 values changed by user &16.
DST security officer password reset or profile change requested by user &16.
Program &28/&27 uses a restricted instruction.
Public authority &4 used for object &1.
Network profile changed on server &20.
Status change of server &20.
No directory objects are secured by this authorization list
No library objects are secured by this authorization list
ProfileHandle specified during set process user profile processing was not valid.
User does not own any objects, press Enter to remove
Profile handle generated for user &20.
Pass-through target user profile &22 changed to &23.
Read only violation by program &27 for object &20.
CCSID value &1 not compatible with the system.
User profile name &1 shortened to &2.
Object &21/&20 object type &22 created by user &16.
Object &21/&20 object type &22 created by user &16.
Object &21/&20 object type &22 restored by user &16.
File closed on server &20.
Account limit exceeded on server &20.
Network logon or logoff from server &20.
Password failure on server &20.
Resource access on server &20.
Start or stop of session on server &20.
Object &21/&20 object type &22 restored by user &16.
Object &21/&20 object type &22 moved to library &24.
Object &21/&20 object type &22 renamed to new name &23.
QAUDCTL system value changed to *NONE.
QAUDCTL system value changed to *NONE.
Audit attributes for object &21/&20 type &22 changed by user &16.
&20 in library &21 entered by user &16.
Adopted authority from user &23 started or ended for user &16.
Information about job &24/&23/&22.
Mail log opened for user &20 by user &16.
Document library object &24 type &22 changed by user &16.
Document library object &24 type &22 read by user &16.
Object &20 in library &21 type &22 changed by user &16.
Object &20 in library &21 type &22 read by user &16.
System management tool used by user &16 in job &13/&12/&11.
System service tool used by user &16 in job &13/&12/&11
Output created in job &23/&22/&21 by user &24 was printed.
Work on behalf of user &25 began or ended by user &24.
APPC bind failure occurred on device &21.
System distribution directory updated by user &23.
Spool file information for user &16 in job &13/&12/&11.
Security auditing journal QAUDJRN created in library QSYS.
User &32 not authorized to work on behalf of user &36.
User profile &1 owns directory objects that do not have links.
Object &21/&20 type &22 changed to run under owning user profile.
A socket was given from job &13/&12/&11 to job &20/&21/&22.
Directory information for object &21.
Primary group changed for object &21/&20 type &22.
Object &21/&20 type &22 with the *OWNER attribute restored.
Object &21/&20 type &22 restored. Primary group changed to user &24.
Access control list changed on server &20.
Start, stop or reject of connection on server &20.
User profile &1 is authorized to objects that are not in a library.
There are no objects for this user profile.
Some system values will be ignored.
User profile &1 restored with STATUS set to *DISABLED.
User profile &1 changed to STATUS of *DISABLED.
Authorization list &1 is attached to directory objects that do not have links.
Unable to write audit record to QAUDJRN.
There are no objects that can be displayed.
EIM association operation for user &1 not successful.
Password does not meet all password rules.
User profile &1 has authority to directory objects that do not have links.
Copy library command canceled.
No change to the library list was requested.
Library list edit canceled with Exit or Cancel key.
Error occurred during display of IPLDEFINE menu.
Selection was not made from the list.
&1
&1 messages merged; &2 messages left to be merged.
* - Work with problem allowed for message.
Waiting for reply to message on message queue &2.
Message queue &1 in library &2 was deleted and created again.
All messages were deleted from message queue &1 in &2.
A recovery program was run to recover message queue &1 in library &2.
A recovery program was run to recover message queue &1 in library &2.
Starting recovery for damaged message queue &1.
All messages were deleted from message queue &1 in &2.
A cleanup program was run to clean up the job message queue for &3/&2/&1.
Starting a cleanup program for QJOBMSGQ - Please Wait.
Run priority for SCPF has been changed to 0.
Original run priority for SCPF has been reinstated.
F17 or F18 request has been ended.
QJOBMSGQFL system value locked, so *NOWRAP value used when job message queue is created.
Job message queue for &3/&2/&1 has been wrapped.
Job &6/&5/&4 was ended.
Message queue &1 was wrapped.
Unanswered messages removed to wrap message queue &1.
Delivery mode of message queue &1 changed.
Initial program ended and *SIGNOFF specified for initial menu.
Attention key handling program was not set.
Starting dump for message &1, program &2.
Job structure dump in progress for message &1, program &2.
Mode of message queue &1 in &2 not changed.
Inquiry handling exit program provided a reply.
Device &1 recovery failed.
Maximum length request unit changed to *CALC.
Synchronous vary on for line &1 did not complete in the time allotted.
Local location entry &1 not added.
Class-of-service description &1 not found.
Mode description &1 not found.
Remote location entry &1 not added.
Parameters must match for auxiliary printer and display.
Printer name ignored for local and virtual displays.
Keyboard language type changed for system console.
Output queue &1 in &2 already exists.
Printer error message ignored for ASCII non-LAN printers.
Parameters must match modem settings.
Connection number is too long.
Synchronous vary on for NWI &1 did not complete.
Parameter ignored for nonswitched network interface.
Keyboard type value *SYSVAL ignored for device.
Form feed value changed to &2.
Description for NWI &1 deleted with line &2 attached.
Emulating ASCII device value changed for device &1.
No switched network interfaces attached
No controllers attached
No switched controllers attached
No switched lines attached
No devices attached
No auxiliary devices attached
Connection list &1 does not exist.
Entry &2 does not exist in connection list &1.
No active switched controllers attached
No group addresses found
Connection list &1 changes will affect calls.
Local number presentation value ignored.
Nonspacing underline character found in byte &1.
Substitution characters encountered converting to CCSID &2.
Workstation customizing object does not exist.
Parameter ignored for third party call control.
No functional addresses found
Separator program &1 in &2 not found.
Full inquiry interval and polling interval parameters are not used.
Logging level and local manager mode parameters not used.
Line description &1 not found.
NetBIOS description &1 not found.
Synchronous vary on for network server &1 did not complete.
Description for server &1 deleted with line &2 attached.
ONLINE at IPL changed to *NO
Not authorized to NetBIOS description &1.
No storage space links found
No attached lines
No host adapter VE paths
User-defined data transform program &1 in library &2 not found.
User-defined object &1 in library &2 not found.
User-defined driver program &1 in library &2 not found.
IPX description &1 not found.
Not authorized to IPX description &1.
Operation in progress, performing hardware reset.
Operation in progress, updating configuration files.
Operation in progress, shutdown being performed.
Entry already exists in configuration list.
No TCP/IP port configuration found
No TCP/IP route configuration found
Required parameters assumed for LINKTYPE(*DLUR)
XON and XOFF characters reset.
Object not usable.
System device list changed.
NETTYPE parameter has changed.
No active modes
No objects matching name &1 found.
Parameter ignored for network server &1.
OS shutdown had errors
Storage path &3 has been removed.
Virtual Ethernet path port number &3 has been removed.
SHUTDTIMO value changed to 31 minutes.
Parameter ignored for NWSH device &1.
Parameter &3 value changed to &6 for &1.
No aggregated resource list entries
FRCVRYOFF parameter value changed to *NO for device &1.
Currently processing a request.
Records in &3 in &4 are in arrival sequence.
Authority holder exists for &1 in &2.
Substitution characters may have been used.
File &1 in library &2 was created.
Null capable field copied to a field not null capable.
Null values not copied to created file &1 in &2.
Record updated in to-file &1 library &2 member &3.
No authority to any question and answer databases in library &1.
No authority to question and answer database.
Selection must be made.
Make only one selection.
Database &1 created in &2.
Database created. Press Help in this field for code page.
Question and answer database &1 loaded.
Recovery not possible. Reload question and answer database.
A question title must be entered.
Question and answer database already exists.
Not able to create question and answer database.
Not authorized to create a load for &1.
Question and answer database &1 changed.
&1 specified more than once.
Not able to create list of devices.
Question and answer database &1 deleted.
Not able to allocate question and answer database.
Question and answer database already exists.
Communication with remote system not successful.
Not able to complete remote function.
Question cannot be changed or deleted now.
Primary topic not correct on remote system.
Secondary topic not found.
Search word &1 is not found. Press Enter to search anyway.
Connecting to remote system - please wait
Remote system sign on in progress.
Successful sign on to remote question and answer database.
Searching remote question and answer database &1.
Getting titles from remote question and answer database.
Getting text from remote question and answer database.
Submitting item to remote question and answer database.
Adding text to remote question.
Deleting item from remote question and answer database.
Topic or identifier not specified or not correct.
All question titles have been deleted.
No list available.
Cursor not in list field.
Cursor not in text field.
Remote question and answer function did not complete.
Primary topic not found.
Values not correct.
More than four search words selected.
Question identifier &1 is not correct.
List submitted for printing.
Print error.
Communications problem occurred.
Press Enter to confirm delete request.
Delete successful.
Delete not successful.
Search word or topic &1 not deleted.
Copy successful.
Question text required.
Current question is first on the list.
Not authorized to access the remote system.
You only have authority to search a database.
Current question is last on the list.
No question to forward.
Maximum allowable number of titles found.
Maximum allowable text found.
Question added to database &1.
Question ID &1 available as &2 item.
Recovery in progress.
Recovery complete
&1 added
No text available.
Maximum allowable text written.
Not able to load database.
Support contact information created or changed.
Supplied question and answer database present. Press Enter to load.
Error loading database &1 in library &2 . Recovery is needed.
Creating load for &1 from library &2.
Loading question and answer database &1.
Creating question and answer database &1.
Deleting question and answer database &1.
Processing your request.
&1 change in process.
&1 not deleted.
&1 already exists.
Not able to remove install files.
Database &1 has been loaded and default values were used.
Question ID &1 has been answered.
Topics cannot be deleted from this display.
Question &1 has been forwarded and cannot be altered.
Remote conversation will be lost.
Remote conversation will be lost with option &1.
Invalid label entered.
Opening question and answer database. Please wait.
Search Words Used field must contain a 1 or a 2.
Install failure.
Database name not supplied or incorrect.
Primary topic must be supplied.
Label must be supplied
Question type is not valid.
&1 may not contain an asterisk (*)
A Y or an N must be entered.
Enter the label and device name.
Source type not correct.
Source ID not correct.
Edit status not correct.
From date not correct.
To date not correct.
Owner field not correct.
Reviewer field not correct.
Search word not correct.
Duplicates of search words entered.
Remote database does not support data translation.
No &1 questions available for publication.
No titles available.
No topics available.
No search words available.
Forwarded items included in your choices for deletions.
No Q & A databases available
Question &1 may be a duplicate of &2
Question and Answer database &1 has already been deleted.
Not authorized to perform this option on this database.
The database information needs to be updated.
Question and Answer database &1 missing files. Consult a coordinator.
Supplied IBM i Q and A database
Question and Answer database &1 does not exist in library &2.
Question and Answer database &1 is in use.
Question and Answer database &1 is in use by a coordinator.
No configuration description exists for resource name.
Port number specified is not valid.
Message file &2 in library &1 not found.
Message ID &3 not found in message file &2 in library &1.
Line description no longer exists.
Exit program &2 in library &1 not found.
Controller description no longer exists.
Check code specified is not permitted.
No problem analysis was run on problem.
Device description no longer exists.
Network interface description no longer exists.
Parameter value for panel display indicator is not valid.
Number of keywords returned not valid.
Keyword contains characters that are not valid.
Parameter value for direction indicator is not valid.
Message not found for keyword &1
Copying records to file &1 in library &2 member &3.
Copying file &1 in library &2 label &3 to work file.
Copying records from file &1 in library &2 member &3.
MRT Job Statistics
Trace storage full, trace ended.
Error occurred, trace ended.
Member &3 opened to copy of database records.
File &1 overridden.
Field &2 changed to input-only in open query file.
Query result may differ from intended value of &1.
Building path for member &3 file &2 in &4.
Member &3 renamed to &4 during recovery.
Rename of member &3 to &4 failed.
&3 logical access paths saved or restored.
File &1 in &2 found damaged.
Member &3 file &1 in library &2 not restored.
Member &3 damaged by restore.
Member &3 larger than maximum size of file.
Not all attribute changes put in effect for file &1.
Access path ownership given to QDFTOWN.
File level identifiers do not match.
Member level identifiers do not match.
Too many members for the MAXMBRS value.
SRCTYPE option ignored for file &1 in &2.
Member list for view &1 has been changed.
Member list for an unique index &1 has been changed.
File &1 in &2 shares access path.
UNIT parameter ignored for file &1 in &2.
Dependent file &1 in library &2 deleted.
No record locks
No record locks found for specified member
File not valid for save.
Member &1 file &2 not saved.
Access path attribute changed.
Program &1 not eligible program for job.
System access path protection in progress.
Trigger &3 in library &4 was added to file &1 in library &2.
Trigger &3 in library &4 was removed from file &1 in library &2.
Dependent triggers removed from file &1 in library &2.
File not valid for save.
File &1 in library &2 deferred.
Restore of file &1 in library &2 completed successfully.
No access paths to display
No constraints to display
File &1 is journaled to a damaged journal.
Sort sequence table contains substitution characters.
Sort sequence table for file &1 not used.
System access path protection processing has started.
System access path protection processing has completed.
No DataLinks to display
The user-defined type is not found.
The total length of the fields of the file is greater than 3.5 gigabytes.
Journaling not ended for file &1 in library &2.
Cross-reference message
Starting cross-reference merge processing for primary ASP &1.
Ending cross-reference merge processing for primary ASP &1.
Problems were encountered during cross-reference vary on merge processing for primary ASP &1.
Problems were encountered with a cross-reference echo reciever queue type &2, for primary ASP &1.
&1 Objects (&2 of &3 libraries) processed.
Cross-reference notification &3 for request &2, type &1.
Recreating views in QSYS2 and SYSIBM.
Cross-reference message
Cross-reference message
Cross-reference message
Cross-reference message
Cross-reference message
Cross-reference message
Cross-reference message
Cross-reference message
Constraint was added.
Constraint was removed.
Constraint was changed.
Referential constraint defined but not established.
Parent file &5 is not journaled.
Multiple or duplicate referential constraints exist.
Constraint was changed to the defined state.
Secondary referential constraint was added.
Secondary referential constraint defined but not established.
Primary key constraint implicitly added.
Key specifications not removed from file &1 in library &2.
DataLink request entries sent to database server job.
DataLink request successfully completed.
Constraint verification successful for file &1.
Reconcile unlinked DataLinks.
Trigger was changed.
Normal cleanup of excess spool members in progress.
Member &2 added to file &1 in &3.
RLSWTR changed to OPTION(*CURRENT) for writer &1.
Output queue for printer &1 created.
Error occurred while trying to create output queue for printer &1.
Output queue for printer &1 was created again.
No spooled output files
No inline data files
No jobs in job queue
No job queues
No output queues
No readers
No writers
No printers
Position must be number from 1-9,999 or filled with blanks.
Status is pending
Press F5 (Refresh).
No status
An entry was not put on data queue &1 in library &2.
Writer &1 cannot send spooled file &2.
Writer &1 cannot send spooled file &2.
Writer &1 can not process file &2 on remote server.
Operator action required on printer servicing remote print queue &1.
&2 of &3 &1 converted.
Jobs exist on job queue QSPRCLJOBQ in library QRCL.
Spooled files exist on output queue QSPRCLOUTQ in library QRCL.
Job or file separator not printed for file &4.
Overlay not printed on printer &9 for file &4.
Writer &1 cannot re-direct file &4 to device &9.
Writer &1 found AFPDS command in file &4.
Writer &1 cannot re-direct file &4 to printer &9.
Writer &1 cannot re-direct file &4 to device &9.
OPTION changed from *PAGEEND to *IMMED.
OPTION changed from *IMMED to *PAGEEND.
Writer &1 cannot re-direct file &4 to device &9.
Writer &1 cannot re-direct file &4 to device &9.
AFP was not started to device &4.
Writer &1 cannot re-direct file &4 to device &9.
Highlighting ignored by device &9.
Writer &1 found bar code data that is not allowed.
Writer &1 found command reject error.
Writer &1 found bar code check.
Writer &1 found graphics check.
Writer &1 found specification check.
Writer &1 found image check.
Writer &1 found data check.
Intelligent Printer Data Stream (IPDS) data ignored by writer &1.
Character identifier of file &4 not available on device &9.
Unrecoverable position check detected on device &9.
File &4 exceeded the maximum number of fonts allowed.
OPTION changed to *CNTRLD for writer &1.
Writer &1 cannot re-direct file &4 to device &9.
Value of PAGESIZE, CPI, or IGCCPI parameter of file QPSPLPRT in QSYS not supported by device &9.
Value of PAGESIZE, CPI, or IGCCPI parameter of file QPSPLPRT in QSYS not supported on device &9.
Font pitch or character identifier of file &4 changed.
Font identifier of file QPSPLPRT in QSYS not supported on device &9.
Font identifier of file QPSPLPRT in QSYS not supported on device &9.
Remaining output for file &4 number &10 may not be correct.
OPTION changed to *CNTRLD for writer &1.
Writer &1 not able to allocate device &9.
SPLFASP set to *OUTQASP for output queue &1 in library &2.
Time conversion error &1 occurred.
Spooled file &1 number &8 in job &5/&4/&3 not moved to position requested.
Value &1 for spooled file attribute at offset &2 not valid.
Last page in created spooled file did not end.
Value in buffer &6 of user space &4 in library &5 not valid.
Control field requires valid value.
Page requested is before first page of file.
Record requested before first record of file.
Page requested after last page in file.
Record requested after last record in file.
Character string not found before end of file reached.
Character string not found in file.
String found in position &5.
Window moved to display string.
Only printer files allow paging.
'B' or '*BOT' cannot be followed by any characters.
Control field requires number after '+' or '-'.
Scan string not specified.
Empty scan string not allowed.
To find a character string, press F16.
Starting position greater than record length of &1.
End position for scan string comes after end of record.
End position number for scan string is before start position.
Scan string too long.
Overprinting not displayed.
Scan string is too long.
Scan string is too long.
Scan string is too long.
Variable characters per inch or font size not supported.
Specified window starts before column 1.
Specified window starts after last position of the record.
End of file already shown.
Empty ideographic scan string not allowed.
Print position adjustments were made on data line(s).
Line numbers of file adjusted.
Line numbers of file adjusted.
Ideographic data detected on data line(s)&1 not valid.
Text functions not displayed.
Graphics not displayed.
Bar codes not displayed.
Intelligent Printer Data Stream (IPDS) data not displayed.
Intelligent Printer Data Stream (IPDS) data not displayed.
'T' or '*TOP' cannot be followed by any characters.
Advanced Function Printing Data Stream (AFPDS) data not displayed.
Job saved for possible reuse.
Advanced Function Printing Data Stream (AFPDS) data not copied.
Incorrect database record length for S/36 COPYPRT command.
Images not displayed.
Data displayed may not be correct.
Some spooled output file attributes not supported.
Print attribute value not supported.
Sending of file &4 complete from output queue &2.
Printing of file &4 complete on printer &9.
Number of PTF files selected not valid.
Licensed internal code fixes set to be temporarily applied.
Double-IPL switch turned off.
PTF IPL actions partially complete.
Licensed internal code fixes set for delayed permanent apply.
Licensed internal code fixes have been permanently applied.
Licensed Internal Code fixes will be processed immediately.
Incorrect status for licensed internal code PTF &1.
Perform the following &4 actions for PTF &1-&2 &3.
PTF requisite validation completed successfully for product &1.
PTF &1-&2 requires PTF &3 to be permanently applied.
Apply PTF started.
Licensed internal code fix &1-&2 was bypassed.
Applying PTFs failed.
Applying of PTFs failed for product &1.
Error log identifier &1 not found.
Error log information not included.
Spooled file &4 not found.
Trace records will be stored in trace table &1
Request to automatically apply PTFs for product &1 has been canceled.
Request to automatically remove PTFs for product &1 has been canceled.
MPTFI for Licensed Internal Code not restored due to error.
MPTFI for licensed internal code not saved due to error.
PTFs have been identified to be automatically removed for product &1.
Superseded licensed internal code fixes not applied.
Superseded PTFs were applied.
Licensed internal code PTFs have been removed.
Licensed internal code fixes have been processed.
PTFs are identified to be applied for product &1.
PTF save file not found
Cannot determine which licensed internal code copy in use.
MPTFI for licensed internal code has been cleared.
PTF &1-&2 &3 has special instructions.
PTF information for licensed program &1 may be incomplete.
PTF &1-&2 cannot be permanently applied.
Updating PTF information &1 of &2 processes complete.
This is a subsetted list of PTFs.
Specified corequisite PTF &1-&2 &3 not found.
No requisites applicable. Use F14 to display all.
Waiting for lock.
Updating PTF information for file &1 of &2 in library QGPL.
PTFs are not applicable to the active server firmware.
PTF &1-&2 &3 cannot be copied to release &4.
Applying PTFs
Removing PTFs
Applying PTF &1 of &2.
Setting IPL action for Licensed Internal Code PTF &1 of &2.
Loading from PTF file &1 of &2 on volume &3 of &4.
Loading PTFs for &1 of &2 licensed programs.
File &1 in library &2 not processed.
PTF group &1 level &2 created.
PTF group &1 level &2 deleted.
Server IPL information changed for PTF &2-&1 &3.
Cover letter has been copied to file &1 member &2.
Cover letter not copied.
PTF &1-&2 exit program failed during permanent apply.
PTF &1-&2 exit program failed during permanent remove.
PTF ID range threshold exceeded.
Object &1 type &2 not in object list.
PTF object &1 corresponds to system object &4.
MPTFI for licensed internal code has been restored.
PTF installation process started.
Error occurred while removing PTFs.
Resource name &1 not found.
Volume type &1 or model &2 not correct.
No error log entries were found for &1 &2.
More than twenty options typed.
Job &3/&2/&1 not found.
&1.
&1 for &2.
QIPLTYPE system value changed during install process.
Save-while-active checkpoint processing for library &1 complete.
Save-while-active request ended abnormally on library &1.
Save-while-active checkpoint processing complete.
&2 of &3 libraries processed. &4 objects saved from &1.
&2 of &3 libraries processed. &4 objects restored to &1.
&1 type *&2 specified more than once.
Save submitted at &2. Save will start at &1.
&1 objects saved on media file.
Output data not complete in user space &1.
&2 &1 has authorization list &4.
Owner changed for object &2.
&3 is the primary group for object &2.
Authorization list changed for object &2.
Owner changed for object &2.
Primary group *NONE for restored object &2.
Authorization list changed for object &2.
Public authority *EXCLUDE for restored object &2.
Save-while-active request ended abnormally.
Objects not saved for directory &1.
&2 of &3 libraries processed. Started &1 at &4.
Save-while-active checkpoint processing in progress.
Save history not updated for objects in &1.
Cannot save or restore security data using ASP &1.
OBJ parameter value changed, &1.
Started processing &1 objects, completed &2 objects.
Cleanup step &1 of &2.
Cleanup step &1 of &2 is &3% complete.
&2 &1 created again while it was being restored to library &3.
&2 libraries processed. &4 objects restored to &1.
Object created again while being restored, &2.
Altered object restored, &2.
*&2 &1 saved with partial transaction.
Parent directory created, &1.
&1 existing spooled files not restored.
PTF &1-&2 &3 should be removed.
Save operation started for synchronization ID &1.
Object &1 type &2 in library &3 not freed. Object in use.
Additional recovery may be needed for object &2.
All authorizations revoked for &2.
Authority not restored for user &4.
Authority not restored for user &3.
All objects completed for DFRID &1.
DFRID &1 has &3 objects remaining.
Authority not restored for user &4.
Checkpoint complete for synchronization ID &1.
Waiting for all synchronization ID &1 operations to start.
SAVFDTA(*YES) ignored for file &1 in library &2.
SAVFDTA(*YES) ignored for file &1 in library &2.
Data compaction not performed.
Omit library &1 not included.
Signature verification failed for restored object &2.
&2 &1 was excluded.
&2 &1 in library &3 restored with failed signature verification.
Applying program temporary fixes for &1.
Starting to restore library &1.
Starting to restore licensed program &1 option &2.
Starting to restore spelling aid dictionary &1.
Starting to restore secondary language &1.
Library &1 not restored.
Licensed program &1 option &2 not restored.
Spelling aid dictionary &1 not restored.
Loading program temporary fixes for &1.
Device name specified not valid.
Installed programs specified and none on system.
Spelling aid dictionary &1 not deleted.
Licensed program &1 option &2 not deleted.
Error on tape drive.
Program temporary fixes (PTF) processing did not complete.
Saving licensed program &1 option &2.
Licensed program &1 option &2 not saved.
Deleting spelling aid dictionaries.
Deleting secondary language &3.
Deleting licensed program &1 option &2.
&2 &1 in library &3 restored with primary group *NONE.
UID for user profile &1 already exists.
GID for user profile &1 already exists.
&4 is the primary group of &2 &1 in &3.
Data compression not performed.
&4 owns &2 &1 in &3.
Not all members in file &1 displayed.
Security object portion of profile &1 not saved.
Security object portion of user profile &1 not saved.
VOL(*SAVVOL) specified with optical device.
Data compression not performed.
Tape files with sequence numbers greater than 9999.
Authorities processed for &1 of &2 user profiles.
Media file &1 of &2 information.
SAVACT(*SYNCLIB) used with media definition.
&2 &1 in library &3 restored with owner &4.
&2 &1 in library &3 restored with primary group &4.
Mail no longer saved by this command.
Watch session &17 ended. Reason code: &5
Integrated file system object saved.
Integrated file system object not saved.
Object not saved to a save file.
Integrated file system object not dumped
Not authorized to API QSPCRTSP
Spooled file not restored
Problem record not restored
Problem record not created
User space &1 not deleted
User space &1 not created
Problem &1 not printed
Spooled file &1 not saved
Problem &1 not updated
Override to output queue &1 not done
Output queue &1 not cleared
Output queue &1 not created
Spooled file not copied from user space
Spooled file &1 not copied to user space
User space &1 not found
Program temporary fixes saved
Program temporary fixes not saved
Active jobs saved
Active jobs not saved
System values saved
System values not saved
Problem log entries saved
No problem log entries saved
Value not valid for system object type
Value not valid for object type
System object &1 saved
System object &1 not saved
Problem log entry &1 saved
Job &3/&2/&1 attributes saved
Job &3/&2/&1 attributes not saved
Job &3/&2/&1 log saved
Job &3/&2/&1 log not saved
Internal configuration saved
Internal configuration not saved
VLIC log identifier &1 saved
VLIC log identifier &1 not saved
VLIC log entries saved
VLIC log entries not saved
Error log identifier &1 saved
Error log identifier &1 not saved
Error log entries saved
Error log entries not saved
Document library object &1 saved
Document library object &1 not saved
Spooled file &1 saved
Spooled file &1 not saved
Software resources saved
Software resources not saved
Hardware resources saved
Hardware resources not saved
Hardware resources partially saved
Problem log entry &1 not saved
History log saved
History log not saved
Not authorized to object &1 in &2 type &3
Object &1 in &2 type &3 not found
Saving of problem log entries not successful
Object &1 type &2 not saved
Object &1 type &2 saved
Object &1 type &2 in library &3 saved
Object &1 type &2 in library &3 not saved
APAR library &1 not created
APAR library &1 not deleted
Object &1 not copied
Save file &1 not created
Save file &1 not deleted
Object &1 not saved to a save file
Object &1 not dumped
Object &1 not displayed
Problem data automatically saved
Command &1 failed
Command &1 not found
Spooled file &1 not found
Not authorized to command &1.
Save APAR Data problem
SNADS *SVDS sender &3/&2/&1 deleted request from distribution queue &4.
Starting recovery for SNADS *SVDS sender &3/&2/&1 serving distribution queue &4.
Recovery failed for SNADS *SVDS sender &3/&2/&1 serving distribution queue &4.
Object &2 of &3 being compressed in library &1.
Compressing object &1 with size &2KB.
Object &2 of &3 being decompressed in library &1.
Decompressing object &1 with size &2KB.
Operation in progress, please wait.
Decompression of library &1 complete.
&4 *&2 objects decompressed in library &1.
Decompression of library &1 complete.
&4 *&2 objects decompressed in library &1.
Trace storage full, trace ended.
Internal error occurred, trace ended.
CDRA resource in use. Try again later.
CDRA update resource not available.
&4 records added to file &1 in library &2, member &3.
&1 records were added to the output data buffer.
Job attributes not set from locale.
Environment variable not set.
Requested function is not available.
Processing line &1 of &2 in source.
Required option &1 is not available.
Object &1 in &2 type &3 was converted to system domain.
One or more libraries specified was not found.
&1 exit programs removed. &2 exit programs not removed.
An exit program was called in a multithreaded job.
QUSEXRGOBJ in QUSRSYS cannot be accessed.
Exit registration facility repository is full.
User installation processing started.
Initialize System (INZSYS) started.
&3 objects for licensed program &1 option &2 already installed.
Marking of PTFs for delayed application started.
New licensed program &1 option &2 found on volume number &4.
New licensed program &1 option &2 found on volume &3.
Installing minimal products. Not all licensed programs installing.
&3 objects for compatible licensed program &1 option &2 not found on installation media.
User exit program QLPUSER did not run.
User exit program QLPUSER did not run.
Licensed program installation process failed.
User installation processing failed.
Automatic installation not complete.
Some licensed programs not found on media.
Licensed program installation process started.
Licensed program installation partially complete.
&1 option &2 not found on media for preselection.
Marking of PTFs for delayed application failed.
Licensed program installation failed.
No licensed programs processed.
Loading of PTFs started.
Loading of PTFs failed.
&3 objects for sample licensed program &1 option &2 not found on installation media.
&3 objects for licensed program &1 option &2 may require installation.
No recovery information found.
RMVLNK is starting.
Message queue for device &1 changed to &2 in *LIBL.
Message queue for device &1 changed back to &2 in library &3.
Folder name cannot be specified for FLR parameter.
Folder name cannot be specified for FLR parameter.
&1 option &2 selected for removal from the preparation list for the target release.
Database cross-reference files are in error.
&1 &2 was added to the list of products.
Some software agreement documents not restored.
Software agreement accepted. Install of licensed program is continuing.
IPL required to allocate additional LIC space.
Agreement not accepted for *MCHCOD.
Restoring software agreement for *MCHCOD.
All licensed programs were found on media
Allocating additional space is not necessary.
Additional LIC space will be allocated next IPL.
Additional LIC space will not be allocated next IPL.
LIC started allocating additional space for &1.
Agreement not accepted for licensed program &1 option &2.
Agreement not accepted for licensed program &1 option &2.
No licensed programs need their software agreements accepted.
Restoring software agreement for &1 option &2.
Missing information on volumes in device &1.
Software agreements were not restored.
Software agreements were not restored.
Software agreements were restored.
Allocating additional space is not necessary.
*PGM objects for product &1 option &2 are installed at release &4.
*LNG objects for NLV &3 for product &1 option &2 are installed at release &4.
Checking objects for product &1 option &2 release &4.
Processing objects for product &1 option &2 release &4.
Saving *PGM objects for product &1 option &2 release &4.
Saving *LNG objects for product &1 option &2 release &4 NLV &3.
No installation profiles
Keep disk configuration set to *NO.
Keep disk configuration set to *YES.
No &3 objects restored in library &6 for product &1 option &2 release &4.
Some &3 objects restored in library &6 for product &1 option &2 release &4.
No &3 folders restored in folder &5 for product &1 option &2 release &4.
Some &3 folders restored in folder &5 for product &1 option &2 release &4.
*LNG objects for product &1 option &2 release &4 cannot be deleted.
*PGM objects for product &1 option &2 release &4 cannot be deleted.
Installed programs specified but system has none.
No user installation processing defined.
Directory not restored for product &1 option &2 release &4.
Value for parameter &5 not valid.
Software agreements not accepted.
NLV &3 objects for licensed program &1 option &2 not found on installation media.
Local relational database accessed by &1.
Local relational database access ended.
Connection to relational database &1 ended.
DDM TCP/IP server already active.
DDM TCP/IP server does not support security mechanism type &1.
DDM TCP/IP server job successfully submitted.
DDM TCP/IP server successfully ended.
DDM job &3/&2/&1 servicing user &4 on &5 at &6.
Prestart job entry for program QRWTSRVR in QSYS does not exist.
Connection to relational database &1 ended.
Too many selections made.
Error with data dictionary &2.
Data dictionary &1 is not complete.
Data dictionary &2 contains DBCS information.
&2 source file contains DBCS information.
Error with field definition &1.
Field definition &1 is not complete.
Field definition &1 cannot be restored.
Field definition &1 has name exceeding 6 characters.
Field definition &1 DBCS data type is now Either.
Field definition &1 data type is now hexadecimal.
Field definition &1 data type is now character.
DBCS data type has changed.
Error with format definition &1.
Format definition &1 is not complete.
Format definition &1 cannot be restored.
Format definition &1 contains newly named fields
Some attributes of format definition &1 are ignored.
Error with file definition &1.
File definition &1 is not complete.
File definition &1 cannot be restored.
Device file &1 in &3 not created.
Device file &1 created in &3.
Ideographic Table is full.
The extension character was not defined on output.
Incorrect double-byte character on output.
The cancel option is not allowed.
Incorrect character in input data stream.
Unmatched shift-out character on input from a work station.
Unmatched shift-out character on output to a work station.
Incorrect display control characters detected on output.
Volume &5 is ready for file &2 in &3.
Communication link started on line &2 for writer &1.
Communication link not started on line &2.
Communication link not started on line &2.
Writer &1 can not print file &4.
Contact with printer &4 could not be established.
Writer &1 can not process file &4.
Get Cancel is not allowed.
Query running. &2 records selected, &1 processed.
&1 value not supported for spooled file.
Kana Kanji change is not allowed.
Character &4 cannot be printed on printer &3.
Character cannot be printed on device &3 for file &1 in library &2.
Forms error on device &3 for file &1 in library &2.
Print check on device &3.
Cover open on device &3.
Ribbon error on device &3.
Volume ID does not match cartridge ID
End of forms or forms jam on device &3.
USEOPTBLK parameter ignored.
Common block size used.
Print head overheating on device &3.
Extended error recovery was performed on volume &5.
TERM-SELF command received for program device &4 in file &2, library &3.
Remote location &5, device description &4 not available for retail pass-through session.
The print operation used the default printer device file.
A paper jam has occurred on device &1.
Device &1 not ready.
Problem with device &1.
A door, cover, or interlock is open on device &1.
An input tray needs attention on device &1.
An output bin needs attention on device &1.
A printer supply needs attention on device &1.
A paper path needs attention on device &1.
Query running.
Query running. Building access path for &2 in &1.
Query running. Creating copy of file &1 in &2.
Query running. &1 records selected. Selection complete.
Query running. Sorting copy of file *N in *N.
Query running. Building access path from file &1 in &2.
Query running. Building hash table from &2 in &1.
COMMIT(*ALL) or COMMIT(*CS) specified but files locked *SHRNUP.
COMMIT(*CHG) specified but ignored.
ROLLBACK ignored for cursor positioning.
Intermediate result less precise than derived field &5.
Selection operands compared using reduced decimal positions.
Join fields compared using reduced decimal positions.
Join default values cannot be identified.
Comparison of selection operands may never be equal.
IDDU definition does not exist for member &3.
Set operation done using reduced decimal positions.
Arrival sequence ignored for member &3.
Substitution characters may result from use of alternative collating sequence table.
Value number &3 was changed to contain substitution characters.
Substitution characters used in literal value for item &1.
Substitution characters may be used for field.
Sort sequence table caused substitution characters to be used in literal value.
Substitution characters can result from use of sort sequence table.
Sort sequence table caused substitution characters to be used in variable field value.
Query's sort sequence was applied to the file ordering.
Access path built for &18 &19.
Access path built from keyed file &1.
The query access plan has been rebuilt.
Temporary file built for file &1.
Temporary result file built for query.
&12 &13 processed in join position &10.
&12 &13 processed in join position &10.
Access path of file &3 was used by query.
Arrival sequence access was used for &12 &13.
Query optimizer timed out for file &1.
Subselects processed as join query.
All access paths were considered for file &1.
Additional access path reason codes were used.
Selection fields mapped to different attributes.
Access path suggestion for file &1.
&6 tasks used for parallel &10 scan of file &1.
&6 tasks used for parallel index created over file &1.
&1 host variables used in query.
Hashing algorithm used to process join.
Query implemented as reusable ODP.
Optimizer debug messages for hash join step &1 follow:
Group processing generated.
Temporary hash table built for hash join step &1.
&1 Access path(s) used for bitmap processing of file &2.
Query options retrieved file &2 in library &1.
Unable to retrieve query options file.
Unable to update query options file.
Library &1 not found.
Query options used to build the query access plan.
User-defined function &4 found in library &1.
Multiple join classes used to process join.
Optimizer debug messages for join class step &1 follow:
Performing distributed query.
Performing distributed join for query.
Optimizer debug messages for distributed query step &1 of &2 follow:
Temporary distributed result file &3 built for query.
Optimizer debug messages for query join step &1 of &2 follow:
Query being processed in multiple steps.
The ODP associated with the cursor was hard closed.
Fast past refresh of the host variable values is not possible.
&1 Starting optimizer debug message for query &2.
&1 Ending debug message for query &2.
The query access plan was not rebuilt.
Member &3 was opened with fewer open options than were specified.
Query could not be run using SQE.
Materialized query tables were considered for optimization.
Additional reason codes for query access plan has been rebuilt.
Database monitor started for job &1, monitor ID &2.
Device &1 did not follow SNA rules or it sent a wrong format request response unit.
A negative response was sent to device &1.
Certificate Store recreated for network server description &1.
Certificate store was not found and will be recreated for network server description &1.
The Certificate store is out of date for network server description &1.
Controlled end job initiated during end-of-file delay.
Process initialization parameter data has field indicators that are not valid.
Process initialization parameter data contains field length that is not valid.
Number of process initialization parameters exceeds maximum.
Process initialization parameter data could not be received.
Unexpected system error code received on mode &3 for device description &2.
Program start request on mode &2 of device description &1 rejected.
Internal object damaged.
Moved from member &4 to member &3.
System cannot call out on line &23. Channel service mode not available.
Network server description &30 not usable at this time.
Network server &30 failed. Local configuration problem.
Line &23 failed - LEC join failure.
Line &23 failed - LEC join failure.
Frame size too small for HPR operation.
Line &23 failed - LECS error.
Line &23 failed - Protocol error.
Remote frame size too small for HPR operation.
Line &23 failed. LEC address registration.
Invalid link level ERP combination for HPR.
Server &30 shutdown.
Network server &30 failed.
Network server &1 varied on successfully.
Network server &30 failed.
Network server &1 varied off successfully.
Network server &30 failed.
HPR not supported at remote system.
Device &25 failed. LIC error.
Object &1 type &3 messages redirected from &7/&6 to &5/&4.
Device &25 failed.
Modem connection error on line &1.
Line &23 failed - unsupported configuration.
Line &23 not contacted. Protocol not available.
Network interface &30 failed. No response from NT.
An incoming packet-mode call received on Network Interface &30 was rejected by the local system.
The local system rejected an incoming ISDN call received on Network Interface &30.
The local system rejected an incoming ISDN call received on Network Interface &30.
Incoming X.25 call for Controller &24 was rejected by the local system.
An incoming packet-mode call received on Network Interface &30 was rejected by the local system.
An incoming call received on Network Interface &30 was rejected by the local system.
Device &25 on controller &24 on line &23 failed.
Device &25 on controller &24 on line &23 failed.
Contact with device &1 was unsuccessful.
Contact with controller &1 was unsuccessful.
Attempt to lock device &25 during recovery failed.
An incoming packet-mode call received on Network Interface &30 was rejected by the local system.
An incoming-packet mode call received on Network Interface &30 was rejected by the local system.
An incoming packet-mode call received on Network Interface &30 was rejected by the local system.
An incoming packet-mode call received on Network Interface &30 was rejected by the local system.
An incoming packet-mode call received on Network Interface &30 for Controller &24 was rejected.
Cannot retrieve configuration information.
Line &23 failed. Transmit complete timeout.
NWI &30 failed.
NWI &30 failed.
Incoming call request on line &23 rejected.
Error occurred on SNA pass-through session on control point &43.
Group name &42 for device &25 does not exist.
Associated device not configured for device &25.
Session activation for device &25 and associated device &41 failed.
Session cannot be established for device &25.
Session for device &25 and associated device &41 ended abnormally.
Dial attempt for session for device &25 failed.
Downstream SNPT device &25 rejected activation.
Controller &1 has disconnected.
Incoming call request on line &23 rejected.
Network password received for line &23 not valid.
No logical channel available for incoming call on line &23.
Incoming call request on line &23 rejected.
Local system sent SNA negative response data to controller &1 on device &2.
Controller &1 deactivated by remote system.
Remote system trying to contact device &25. Device varied off or not responding.
Controller not known to local system. Call came in on line &1.
Line &23 failed. Configuration error or internal system failure.
No keyboard translate table for device &25.
Device &25 not contacted. Probable device failure.
Local system rejected call from remote system on line &23.
Local system rejected call from remote system on line &23.
Local system rejected call from remote system on line &23.
Controller on line &1 not varied on, or not recognized by local system.
Line &1 disconnected before contact complete.
Controller on line &1 not varied on or not in RJE mode.
System cannot call controller &24. Application has been canceled.
Line &23 failed. Data received in Contention State.
Device &25 on controller &24 on line &23 failed.
Incoming call request on line &23 rejected.
Automatic error recovery has started for controller &1.
Line &23 has failed.
Customized table for device &25 not found.
Controller on line &23 varied off or not recognized by local system.
Device &25 on controller &24 failed. Internal system failure.
Controller on line &1 varied off or not known to local system.
Device &25 on controller &24 on line &23 failed.
Resources for controller &24 not sufficient.
Resources for controller &24 not sufficient.
Network interface description &30 not usable at this time.
SNA protocol error on line &1.
Device description &25 is not usable at this time.
Controller description &24 in use.
Controller description &24 in use.
Controller description &24 in use.
Cannot change line description &1 to answer state.
Line description &23 in use.
Line &23 could not process an incoming call request.
Line description &23 in use. The switched connection may not have disconnected.
Resources for line &23 not sufficient.
Resources not sufficient for line &23.
SSAP and DSAP names are already in use on the ILAN
Line &23 failed. Local DCE problem.
Line &23 failed. Address in use.
Message &1 reply ignored with error code &2.
Controller &24 on line &23 not contacted. Recovery in progress.
Line &1 is ready to answer.
Internal operating system error in arbiter job.
Message &1 reply ignored.
Controller &1 ready for switched connection.
Controller &1 failed. Automatic recovery started.
Line &1 failed. Automatic recovery started.
Controller &1 failed. Recovery in progress.
Line &1 failed. Recovery in progress.
Device &1 failed. Automatic recovery started.
Controller &24 failed. Probable network configuration problem.
Controller &24 failed. Probable network configuration problem.
Controller &24 failed. Probable network configuration problem.
Line &23 failed. Automatic recovery started.
Controller &24 failed. Automatic recovery started.
Controller &24 failed. Probable local configuration problem.
Recovery for controller &1 failed.
Controller description &24 not usable at this time.
Line description &23 not usable at this time.
Call from controller on line &23 not accepted.
Call from controller on IDLC line &23 rejected.
Automatic error recovery for network interface &30 canceled during IPL.
Automatic error recovery for line &23 canceled during IPL.
Automatic error recovery for controller &24 canceled during IPL.
Automatic error recovery for device &25 canceled during IPL.
An incoming X.25 call received on line &23 was rejected by the local system.
LOCADR parameter for device &25 not correct.
A networking device incompatible with device &25.
A networking device incompatible SNGSSN parameter with device &25.
Controller &24 on line &23 not contacted. Recovery in progress.
Call from controller on line &23 not accepted.
Call from controller on line &23 not accepted.
Network interface &1 failed. Automatic recovery started.
Network interface &30 failed. Automatic recovery started.
Network interface &1 failed with error code &2. Recovery in progress.
Remote system data not valid. Mode &2 device &1 affected.
Remote system sent data that is not valid. Device &1 affected.
Function check occurred in a system job.
Internal failure in system. Controller &1 affected.
Zero session maximum for mode &2 device &1.
SNA sense code &2 received for device &1.
Call from controller on line &23 not accepted.
Call from controller on line &23 not accepted.
Call from controller on line &23 not accepted.
SNA negative response sense code &3 sent by local system to controller &1 on device &2.
Line &1 has disconnected.
Line &1 has disconnected.
Device &1 cannot be used. Internal failure in system.
Device &25 cannot be used. Internal failure in system.
Session maximum not established for mode &2 device &1.
Session maximum not changed for mode &2 device &1.
Session maximum not changed for mode &2 device &1.
Session maximum not established for mode &2 device &1.
Session maximum not changed. Affected device is &1.
Error occurred during vary off of device &1.
Internal failure in system on device &1.
Session maximum not established for mode &2 device &1.
Session maximum not established for mode &2 device &1.
Session maximum not established for mode &2 device &1.
Session maximum not established for mode &2 device &1.
Session maximum not changed for mode &2 device &1.
Session maximum not established for mode &2 device &1.
Request from remote system to change session maximum for device &1 not valid.
Session maximum change reply from remote system for mode &2 device &1 not valid.
Reply to change session maximum from remote system for mode &2 device &1 not valid.
System sent UNBIND sense code to remote system affecting mode &2 device &1.
Internal failure in system. Affected controller is &1.
An incoming packet-mode call received on Network Interface &30 was rejected by the local system.
Controller &1 is connected to a new host control point &2.
Controller not known to local system. Call came in on line &1.
SNA sense code &3 received for mode &2 device &1.
UNBIND sense code received for mode &2 device &1.
Remote system protocol error affecting mode &2 device &1.
Time-out while processing a negative response from remote system. Affected mode &2 device &1.
Session maximum not established for mode &2 device &1.
Session maximum not changed. Affected device is &1.
Session maximum not changed for mode &2 device &1.
Internal failure in system job. Affected device is &1.
System sent UNBIND sense code to remote system affecting device &1.
BIND sense code &3 received for mode &2 device &1.
Transmission priority mismatch between networks.
An incoming packet-mode call received on Network Interface &30 for Controller &24 was rejected.
An incoming packet-mode call received on Network Interface &30 for Controller &24 was rejected.
An incoming packet-mode call received on Network Interface &30 for Controller &24 was rejected.
An incoming packet-mode call received on Network Interface &30 for Controller &24 was rejected.
An incoming packet-mode call received on Network Interface &30 for Controller &24 was rejected.
UNBIND sense code received for device &1.
Wrong remote system protocol affecting device &1.
Session maximum not changed. Affected device is &1.
UNBIND sense code received for mode &2 device &1.
UNBIND sense code received. Affected device is &1.
Session maximum not changed for mode &2 device &1.
Session maximum not changed. Affected device is &1.
Session maximum not established for mode &2 device &1.
Data that was not expected was received for mode &2 device &1.
Data that was not expected was received affecting device &1.
The local system rejected an incoming ISDN call received on Network Interface &30.
An incoming call received on Network Interface &30 was rejected by the local system.
An incoming packet-mode call received on Network Interface &30 was rejected by the local system.
An incoming packet-mode call received on Network Interface &30 was rejected by the local system.
An incoming packet-mode call received on Network Interface &30 was rejected by the local system.
An incoming packet-mode call received on Network Interface &30 was rejected by the local system.
Dialing &2 for controller &1.
The local system rejected an incoming ISDN call received on Network Interface &30.
Connection on device &25 failed. Internal system failure.
Connection on device &25 failed. Internal system failure.
Unacknowledged service on device &25 failed. Internal system failure.
Unacknowledged service on device &25 failed. Internal system failure.
X.25 incoming call request on line &23 rejected.
Internal failure during automatic creation of controller description.
Line &1 has disconnected.
Line &1 has disconnected.
The local system rejected an incoming ISDN call received on Network Interface &30.
Automatic recovery completed successfully for controller &24.
Attempt to recover controller &24 failed.
The local system rejected an incoming ISDN call received on Network Interface &30.
The local system rejected an incoming ISDN call received on Network Interface &30.
Internal system failure while setting thresholds for line &23.
Internal system failure while setting thresholds for line &23.
Line &23 failed.
Controller &24 failed. Maximum errors allowed exceeded.
Device &25 failed. Maximum errors allowed exceeded.
The local system rejected an incoming ISDN call received on Network Interface &30.
The local system rejected an incoming ISDN call received on Network Interface &30.
The local system rejected an incoming ISDN call received on Network Interface &30.
The local system rejected an incoming ISDN call received on Network Interface &30.
The local system rejected an incoming ISDN call received on Network Interface &30.
The local system rejected an incoming ISDN call received on Network Interface &30.
The local system rejected an incoming ISDN call received on network interface &30.
The local system rejected an incoming ISDN call received on Network Interface &30.
The local system rejected an incoming ISDN call received on Network Interface &30.
The local system rejected an incoming ISDN call received on Network Interface &30.
The local system rejected an incoming ISDN call received on Network Interface &30.
Network interface &1 varied on successfully.
Network interface &30 failed. Cable or hardware problem.
Network Interface &1 varied off successfully.
Vertical Licensed Internal Code load failed for network interface &30.
Vertical Licensed Internal Code unload failed for network interface &30.
The local system rejected an incoming ISDN call received on Network Interface &30.
Internal system failure while setting counters for network interface &30.
Internal system failure while setting counters for network interface &30.
Internal system failure while setting counters for line &23.
Internal system failure while setting counters for line &23.
Network interface &30 selected for line &23, some network interfaces not chosen by the system.
The local system can no longer process incoming ISDN or X.25 calls.
The local system is temporarily unable to process incoming ISDN or X.25 calls.
The system is now ready to process incoming ISDN and X.25 calls.
Network interface &30 failed, channel error occurred.
No entries found for this problem
Unacknowledged service on device &25 was not successful.
Unacknowledged service on device &25 was not successful.
Controller &24 vary on failed while downloading PTFs.
Automatic error recovery for network interface &30 canceled during IPL.
Automatic error recovery for line &23 canceled during IPL.
Automatic error recovery for controller &24 canceled during IPL.
Automatic error recovery for device &25 canceled during IPL.
Internal operating system error in system job.
Line &1 has been disconnected by the local system.
Line &1 has been disconnected by the remote system.
Network interface &30 failed.
Resources for Network Interface &30 not sufficient.
Line &23 selected for controller &24, some line descriptions not chosen by the system.
Network interface &30 failed, hardware error occurred.
Network interface &30 failed, TEI assignment failed.
Network interface &30 failed, TEI removed.
Line &23 failed, channel error on network interface &30.
Line &23 failed, hardware error occurred.
Line &23 failed. Resource already in use.
Network interface &30 failed. Resource already in use.
An incoming packet-mode call received on Network Interface &30 was rejected by the local system.
An incoming packet-mode call received on Network Interface &30 was rejected by the local system.
An incoming packet-mode call received on Network Interface &30 was rejected by the local system.
An incoming packet-mode call received on Network Interface &30 was rejected by the local system.
An incoming packet-mode call received on Network Interface &30 was rejected by the local system.
An incoming packet-mode call received on Network Interface &30 was rejected by the local system.
An incoming packet-mode call received on Network Interface &30 was rejected by the local system.
An incoming packet-mode call received on Network Interface &30 was rejected by the local system.
Line &23 failed. Cable or hardware problem.
Line &23 failed due to normal NWS shutdown.
Device &25 session ended. Inactivity time-out.
Line &23 failed. Internal system failure.
Line &23 failed. Internal system failure.
Controller &24 failed. Internal system failure.
Controller &24 failed. Internal system failure.
Line &23 failed. Internal system failure.
Controller &24 failed. Internal system failure.
Network interface &30 failed. Internal system failure.
Network interface &30 failed. Internal system failure.
Associated device or group not configured for device &25.
Session activation for device &25 and associated device &41 failed.
Session cannot be established for device &25.
Session for device &25 and associated device &41 ended abnormally.
Dial attempt for session for device &25 failed.
Associated device &41 not compatible with activating device &25.
Internal system failure related to device &25.
No exported defined symbols
No imported undefined symbols
No referenced system objects
No procedure list
No copyright information
No binding directory entries for this binding directory.
No module information
No service program information
No activation group exports
No activation group imports
No procedure exports
No data exports
No signatures
The DETAIL parameter has been ignored.
ALWUPD(*NO) not valid with the TGTRLS parameter value of &1. ALWUPD(*YES) is used.
ALWRINZ(*YES) not valid with the TGTRLS parameter value of &1. ALWRINZ(*NO) is used.
Exports retrieved for object &1, in library &2, object type &3.
*REPLACE or *ADD specified for source file member that does not exist, source file member is created.
Converting &2 &1 in library &3 to 64-bit RISC.
Program &1 in library &2 no longer enabled to collect profiling data.
Service program &1 in library &2 no longer enabled to collect profiling data.
Program &1 in library &2 enabled to collect profiling data.
Service program &1 in library &2 enabled to collect profiling data.
*TRIM not valid for programs or service programs with applied profiling data. *NOTRIM is used.
Licensed Internal Code options will not be changed for this object.
Deferred activation cannot be specified for bound service program &1.
TERASPACE attribute cannot be changed for module &1.
TERASPACE attribute cannot be changed for this object.
Argument optimization (ARGOPT) cannot be specified for object &1 type *&3.
Parameter &1 value of *YES is not valid. &1 is set to *NO.
Service program &1 requires conversion.
Syntax error on or before line &1.
Tag &1 not found.
System monocase table not found.
Comment starting on line &1 not closed.
Ending delimiter on hexadecimal value not valid.
Hexadecimal value on line &1 not correct.
Starting delimiter on hexadecimal value not valid.
Format of keyword starting on line &1 not valid.
Ending period missing on last parameter for tag &1.
Keyword &1 not allowed on &2 tag.
Tag &1 on line &2 not allowed.
Ending period not found for tag &1.
Required tag &1 not found.
Required keyword &1 not found for tag &2.
Keyword &1 is not allowed.
Length of associated value for &1 keyword incorrect.
Value for keyword &1 not allowed.
Combination of keyword values not valid.
Too many &1 tags found.
Start comment delimiter found inside comment.
Too few &2 tags found.
Combination of keyword values already specified.
Required mapping for code page not found.
Mapping for code page occurred multiple times.
Internal error occurred, reference point &1,&2.
Source CCSID is 65535, default used.
Hexadecimal value on line &1 not correct.
Code page value on line &3 not correct.
Length of associated value for &1 keyword too long.
Length of associated value for &1 keyword incorrect.
Length of associated value for &1 keyword incorrect.
CP-SVR pipe to DLUS &3.&4 has been established.
CP-SVR pipe to DLUS &3.&4 ended normally.
CP-SVR pipe to DLUS &3.&4 on controller &7 not established.
CP-SVR pipe to DLUS &3.&4 on controller &7 not established.
CP-SVR pipe to DLUS &3.&4 on controller &7 not established.
CP-SVR pipe to DLUS &3.&4 on controller &7 not established.
CP-SVR pipe to DLUS &3.&4 ended.
CP-SVR pipe to DLUS &3.&4 ended.
Controller &7 on DLUS &3.&4 not contacted.
Controller &7 at DLUS &3.&4 not contacted.
DLUS &3.&4 sent incorrect data on CP-SVR pipe.
CP-SVR pipe to DLUS &3.&4 on controller &7 not established.
CP-SVR pipe to DLUS &3.&4 on controller &7 not established.
CP-SVR pipe to DLUS &3.&4 on controller &7 not established.
CP-SVR pipe to DLUS &3.&4 on controller &7 not active.
REQACTPU rejected by DLUS &3.&4 on controller &7.
Local system rejected ACTPU from DLUS &5.&6.
Local system rejected ACTPU request from DLUS &3.&4.
ACTPU request not received from DLUS &3.&4 for controller &7.
UNBIND received on CP-SVR pipe to DLUS &3.&4 for controller &7.
CP-SVR pipe to DLUS &3.&4 on controller &7 not established.
CP-SVR pipe to DLUS &3.&4 not active.
Device &1 not available for use by commitment control.
An internal error occurred during the vary on of device &1. Automatic recovery in progress.
Automatic error recovery failed for internal control blocks used by commitment control.
Automatic error recovery successful.
Internal system error occurred while varying off device &1.
Internal operating system error in QLUR job.
Input/output (I/O) error detected for device &1.
SNA negative response received for device &1.
Error detected during TDLC automatic configuration.
Program canceled or session ended abnormally for location name &1.
A system time-out occurred while responding to communications device &1.
Message received from remote system for remote location &2
Default values changed. Warning messages exist.
Alerts are being processed normally.
Controller description &1 not valid for sending alerts.
Alert not sent.
Remote system rejected alert. Alert processing still active.
Function check while processing alerts.
Alert processing ended on &1 at &2.
Alert controller description &1 not found.
Alert not sent.
Media library &1 door open, please close door.
Volume set &2 duplication complete.
&5 blocks processed for sequence &2, volume &3, on device &4.
Category not deleted on device &1.
File &1 not duplicated.
Dataarea specified value for USEOPTBLK.
Unknown cartridge identifer for device &1.
Cartridge &2 volume &3 mounted on device &1.
End of volume &3 reached on device &1.
Device &1 in automated operational mode.
Device &1 in paused operational mode.
Device &1 in manual mode.
Expired file &3 was not duplicated.
Data compaction value was ignored.
Volume &2 duplication complete.
VOL list for device &1 ignored.
Tape on device &1 initialized to density &2 code &3.
Ending file sequence number not correct.
Cartridge ID &2 changed to &3.
User exit message control value specified.
Job &1 identified as user of &2.
No MLB attributes list available
Volume ID does not match cartridge ID
Category not available
Convenience station not found
Cartridge &2 removed.
Cartridge &2 not available
High capacity station not found
Last entry, F3 to exit
Function not successful
Status not available for library device &1
List of tape drives not available
Duplicate cartridge &2 found.
&1 errors on parameters not prompted.
Searching for all available journals.
Searching all available libraries for journal &1.
Remote journal &1 created in &2.
Object &1 could not be journaled.
Problem with data area QDFTJRN in library &1, reason code &2.
Not able to call exit programs.
Unable to obtain library &1 inherit rules.
Searching for damaged receivers associated with journal.
No journaled files
No journaled access paths
No associated receivers
No journals match specified name
No journaled files
No journaled access paths
No journaled file members matching selection criteria
No journaled file members
No damaged receivers
No remote journals
No attached journal receivers
No associated journal receivers
Existing remote journal &1 in library &2 used.
No journaled data areas
No journaled data queues
No journaled integrated file system objects
No journaled data areas matching selection criteria
No journaled data queues matching selection criteria
No journaled integrated file system objects matching selection criteria
Associating receivers with journal &1 in &2.
No journaled libraries
QHSS1 deleted from user profile.
Panel &4 in panel group &1 in library &2.
Menu &1 in library &2.
XX
Menu removed by end request.
File &3 in &4 not deleted.
Remote location &7 connected.
Device &4 received a partial program start request.
Device &4 waiting for program start request. Data received not expected.
Information marked with a '>' changed.
Years before 1940 or after 2039 not supported.
Unsupported information in document not shown.
Invitee list truncated.
Meeting occurrences beyond 500th date not supported.
Text truncated.
Dates and times adjusted to local time zone.
Other security levels found in meeting notice.
Accessing remote calendars on system &1. Please wait.
Calendar not on system &1 &2. Accessing system &3 &4.
Meeting times converted to local time.
Calendar &1 &2 &3 times converted to local time.
&1. Calendar &2 &9 &10 removed from meeting on &3 at &4 by user &5 &6.
&1. Calendar &2 &9 &10 removed from &8 meetings from &3 to &7 by user &5 &6.
&1. &8 meetings from &3 to &7 postponed, canceled, or removed on calendar &2 &9 &10 by user &5 &6.
No remote definitions in list.
Lotus Calendar Connector for OV/400 monitor was started.
Panel group created again after being added to search index.
Position cursor to desired topic and press Enter.
Selected search indexes appended to list
Search index, &1, added to list of indexes
Search index list being created
Command documentation file created for &1 in &2. File is &3.
Command documentation file created for &1 in &2. File is &3.
GENOPT(*SERVICE) specified.
Device description &2 for this device is not varied on.
Apply failed. &9 entries applied to *&10 object.
Remove failed. &9 entries removed from *&10 object.
Dual receiver ignored.
Object name not found for journal receiver.
Journal &1 restored with single receiver.
Object &1 in &2 ended journaling.
Object &1 started journaling to journal &4.
Object &3 ended journaling.
Object &3 started journaling.
*&4 object created as part of operation.
Apply failed. &7 entries applied to &8 objects.
Remove failed. &7 entries removed for &8 objects.
Include access path value modified in ASP &1.
Include access paths value is changed to &1.
Base operating system option 42 not installed or license key not valid.
Base operating system option 42 not installed or license key not valid.
Threshold value set to 100,000 kilobytes.
Delay in obtaining object name, no recovery is necessary.
Recovery procedures for messages CPF70D4 and CPF70D5.
Value too large for the defined field.
Journal state *INACTIVE not valid for a local journal.
RCVSIZOPT values not valid.
Recovery procedures for messages CPF70C4 and CPF70C5.
The count of the entries applied or removed is too large for defined field in the print format.
Recovery text for message CPD7016.
Journal &1 approaching limit of journaled objects.
Interrupted Change Journal operation completed.
Threshold for journal receiver &1 was changed to &3.
Journaling ended for &1 of &2 objects.
Journaling started for &1 of &2 objects.
Journal receivers consuming extra space.
RCVSIZOPT values not valid.
Journal &1 may affect performance.
Internal system journal may affect performance.
Access path too complex to journal.
Collecting information for &1 of &2 objects.
Library journaling inherit rules ignored.
Sending entries for receiver &1 in &2.
Inherit rules overridden for library &1.
Remote journal failed to restart.
Remote journal could not be restarted.
Base operating system option 42 not installed or license key not valid.
Could only start journaling file &1 locally.
Recovery procedures for messages CPF70D4 and CPF70D5.
Could only end journaling file &1 locally.
See the journal for additional object information.
Journaling attributes for file &1 in &2 changed.
No entry specific data
No filtering by program
Changes for object failed to force to disk.
Changes for object failed to force to disk.
Access path recovery time for &1 set to *NONE.
DLTJRNRCV required to continue DLTRCV(*YES)
Potential problem managing journal receiver.
CHGJRN required to continue MNGRCV(*SYSTEM)
IPL required for internal system journal support.
Journal or journal receiver not available.
Journal or journal receiver not available; reason code &6.
CHGJRN required for journal &1 in library &2 in ASP group &5.
Specified system recovery time rounded to &2.
Specified ASP recovery time for ASP &4 rounded to &2.
QDBSRV01 or QDBSxxxV01 system job abnormally ended.
Journal recovery may not be complete.
Interrupted CHGRCYAP or EDTRCYAP completed.
System access path recovery time changed to &1.
Object &1 no longer in a library.
Access path recovery time for ASP &3 changed to &1.
Access path recovery time for &1 recovered.
Damage detected on an internal system journal object.
No user ASP configured or information not available
User profile QDBSHR not available for internal system journal operation.
User profile QDFTOWN not available for internal system journal operation.
Unable to determine system ASP configuration.
Block mode started by the RCVJRNE exit program.
Damage to internal system journal object.
Journal recovery may not be complete for ASP group &3.
No access path information available
Remote journal environments ended for journal &1 in library &2.
User profile &8 used instead of &7.
Access path recovery time for &1 cannot be saved.
Primary group not transferred.
Internal system journal environment recreated.
Internal system journal function failed.
FTS-1001 File transfer support started with &1.
FTS-1002 File transfer support ended with &1.
FTS-1010 Received member &1/&2/&3 from remote location &4.
FTS-1011 Member &1/&2/&3 sent to remote location &4.
APAR data for problem &1 was not deleted.
Secondary APAR data for problem &1 was not deleted.
Query problem status in progress.
No status found for problem &1 on service provider &2.
Text added by &1 to &2 on &3 at &4.
Problem reoccured on the system.
Problem log information not sent to data queue &2.
External Service Tool created problem.
Option not allowed for this PTF ID.
No problem records available containing requested data.
The format used in the release field is not valid.
No selection made.
Too many selections made.
Value &1 for PTF ID must be 7 characters.
Option not allowed for this PTF ID.
Problem changed by CHGPRB command.
Problem deleted by DLTPRB command.
Automatic problem analysis failed
Problem not automatically analyzed - SBMJOB
Problem not automatically analyzed - SRC
Problem automatically analyzed
No text associated with problem.
No PTFs associated with problem.
No spooled files associated with problem.
DAYS value specified too small, DLTPRB used system value.
Query status sent
Query status changed
Problem entry closed
APAR data deleted
APAR data restored
APAR data saved
APAR created
Alert created
Remote recovery ran
Remote verification ran
Analyzed remotely
Problem entry opened
Request received
Opened by Alert
Problem analyzed
Verification test ran
Recovery procedure ran
Prepared to report
Service request sent
Problem answered
Change request &1/&2 submitted
Change request &1/&2 ended
Response sent
Reported by voice
Fixes transmitted
Fix verified
Problem sent automatically
Problem not sent automatically - SRC off
Problem not sent automatically - SBMJOB
Automatic problem notification failed
Problem analysis failed
Positioned to &2 in Network ID &1.
Exact match not found for &2 in network ID &1.
Removal of control point &1.&2 is pending.
Copy Screen Image from &1 to &2 has started.
Copy Screen Image from &1 has ended.
Output file for Copy Screen Image is full.
Screen image not displayed.
Primary focal point processing not active.
No entries in sphere of control
List printed on default printer device.
Control point &1.&2 revoked.
No alert entries matching selection criteria
Line was dropped while alerts were flowing.
No device description was varied on.
Network attributes not available. Alerts not initialized.
Data received from &1.&2 not allowed.
Internal error occurred in alert processing.
Alert session to control point &1.&2 failed.
New alert focal point is &1.&2.
Alert focal point request from &1.&2 rejected.
Focal point request from &1.&2 rejected.
Default alert focal point request rejected.
Alert focal point &1.&2 revoked.
Communications session for alerts not available.
Attempt to send alert failed.
Backup alert focal point &1.&2 is being used.
Focal point request from &1.&2 rejected.
Request for alert focal point rejected.
System is alert focal point for &1.&2.
System is alert focal point for &1.&2.
Alert received from &4 was not valid.
Error in accessing alert file.
Alert has been received from &3.
Alert has already been processed by this system.
Internal error in alert function.
Alert processing started for attended system.
Alert processing started for system that is not attended.
Alert processing is no longer active.
Alerts are no longer being logged.
Only local alerts are being logged.
Only received alerts are being logged.
All alerts are being logged.
System is primary alert focal point.
System no longer primary alert focal point.
System is default alert focal point.
System is no longer default alert focal point.
Focal point loop detected.
&1.&2 not found, alert session failed.
Device varied off. Alert session to &1.&2 failed.
Alert session to &1.&2 failed.
Alert session to &1.&2 failed.
Alert program not found or not active on &1.&2.
Alert session to &1.&2 failed.
Internal error in alert processing.
Alert controller description not defined.
Alert controller description is &1.
Alert session to &1.&2 failed.
Alert could not be sent.
Alert description &1 will not be used when creating an alert.
Alert type &1 not found in code point message file.
Alert description &1 not found in code point message file (QALRMSG).
User cause &1 not found in code point file.
Install cause &1 not found in code point file.
Failure cause &1 not found in code point file.
Recommended action &1 not found in code point file.
User cause &1 does not have the correct number of detailed qualifiers.
Install cause &1 may not have the correct number of detail qualifiers.
Failure cause &1 does not have the correct number of detail qualifiers.
Recommended action &1 does not have the correct number of detailed qualifiers.
Alert description cannot be displayed, it has been deleted.
Message ID &1 not found in message file &2.
Message identifier &1 not found in message file &2.
Probable cause &1 not found in code point file.
Detailed data ID &1 not found in code point file.
Alert Hold Count is set to *NOMAX.
Alert Hold Count is set to &1
Alert filter is &2/&1.
No active alert filter.
Alert processing started on &1 at &2.
Alert filter &2/&1 not found.
Alert not sent to system &1.&2.
Alerts being sent to system &1.&2.
SNMP trap was not generated from an alert for reason code &1.
Connection established to remote system - please wait
Connecting to remote application - please wait
Total bytes is &1. Largest file is &2 bytes.
TIE function could not be performed.
Send request completed successfully.
No files to receive.
REXX interpreter starting.
No exit programs specified in REXX profile
File &1 in library &2 written to media.
Order information files copied from media.
Processing order assistance request. Please wait.
Transmitting file &1.
Building order information file. Please wait.
Error on line &23. Unsolicited response received.
Contact name and telephone number are required fields.
No order assistance requests
Saved information displayed.
Order ID &1 created.
No system configuration files
Communications I/O processor &26 removed or failed.
Communications I/O adapter &27 removed or failed.
High Speed Communications Adapter resource &27 failed.
Communications I/O adapter &27 removed or failed.
Workstation controller &26 removed or failed.
High Speed Communications Adapter resource &27 failed.
High Speed Communications Adapter resource &27 failed.
High Speed Communications Adapter resource &27 failed.
High Speed Communications Adapter resource &27 failed.
High Speed Communications Adapter resource &27 failed.
I/O Attachment Processor resource &26 failed.
Attachment I/O Processor resource &26 failed.
Attachment I/O Processor resource &26 failed.
Resource &26 failed.
Attachment I/O Processor resource &26 failed.
Attachment I/O Processor resource &26 failed.
Attachment I/O Processor resource &26 failed.
Distributed Data Interface resource &27 failed.
Distributed Data Interface resource &26 failed.
Distributed Data Interface resource &27 failed.
Distributed Data Interface resource &27 failed.
Distributed Data Interface resource &27 failed.
FAX adapter &27 failed.
Communications error detected by fax adapter &27.
Internal system error in fax adapter &26.
Distributed Data Interface resource &27 failed.
Cryptographic subsystem &26 failed
Cryptographic subsystem &26 failed
Line &23 failed.
Call failure. Active telephone line is not connected to port &28.
Internal system error detected by resource &26.
Wrong command value sent by operating system.
Wrong command value sent by operating system.
Controller on line &23 failed.
Invalid M/Q bit sequence on logical channel on line &23.
Error on line &23. Internal system failure.
Error on line &23. Internal system failure.
Line &23 has entered a wrapped configuration
Line &23 has recovered from a wrapped configuration
Line &23 on adapter &27 has switched active connection from primary port to backup port
A test of the IOA internal data paths has failed
Cryptographic subsystem &26 failed
Cryptographic subsystem &26 failed
Cryptographic subsystem &26 failed
Cryptographic subsystem &26 failed
Cryptographic subsystem &26 failed
Cryptographic subsystem &26 failed
Error on network interface &30.
Optical Bypass Switch is stuck
Line &23 has entered an undesirable configuration
Retrying call Line &23. Dial tone error.
Retrying call Line &23. No answer tone.
Retrying call Line &23. No answer.
Retrying call Line &23.
X.25 Line &23 exceeded maximum configuration
No dial tone detected by fax adapter &27 on port &28.
Wireless Local Area Network adapter resource &27 failed.
Fax adapter port &28 failed
Fax adapter &27 failed
Fax adapter port &28 has detected a failed or missing coupler.
Retrying call Line &23. Modem aborted call.
Error with device &25 on workstation controller &24.
Error with device &25 on workstation controller &26.
Device &25 on resource &24 failed.
Token-ring resource &27 failed.
Token-ring resource &27 failed.
Ethernet resource &27 failed.
Error on line &23. Unsolicited response received.
Retrying call on line &23. Time-out on call.
Retrying call Line &23. Remote Busy.
Retrying call Line &23. No answer tone.
Ethernet resource &27 failed.
Clear packet sent on logical channel on line &23.
Clear packet sent on logical channel on line &23.
Token-ring resource &27 failed.
Token-ring resource &27 failed.
Ethernet resource &27 failed.
Line &23 failed.
Ethernet line &23 failed.
Attachment I/O Processor resource &26 information.
Communications I/O adapter &27 removed or failed.
Ethernet adapter &27 detected a recoverable error.
Ethernet resource &27 failed.
Ethernet resource &27 failed.
Ethernet resource &27 failed.
Ethernet resource &27 status information
Ethernet network adapter &27 detected recoverable error.
Resource &27 failed.
Resource &27 failed.
Local area network resource &27 failed.
I/O Processor card &27 removed or failed.
Local area network adapter port &28 failed.
Local area network adapter port &28 failed.
Resource &27 failed.
Resource &27 failed.
Informational only. External wrap test passed.
Informational only. External wrap test failed.
Resource &27 failed.
Informational only. External wrap test failed.
Error on ATM network interface &30
Error on ATM resource &26.
Error on ATM network interface &30
Asynchronous Transfer Mode Input/Output Processor &26 failed.
Error on ATM network interface &30.
Communications adapter &27 failed.
Informational only. Full Duplex not supported for adapter &27.
*Attention* The network does not support the configured line speed for line &23
*Attention* The network does not support the configured DUPLEX mode for line &23
Informational Only. Error on network interface &23
The network device does not support the current line &23 configuration.
Unable to establish a network link on Ethernet line &23
Resource &26 status information, line is running.
Resource &26 status information, line is running.
Error on network interface &30. Internal system failure.
Network interface &30 information. Outgoing call limit exceeded.
Network interface &30 information. Outgoing calls rejected has exceeded limits.
Controller &26 detected a recoverable bus error.
Controller &26 detected a non-recoverable bus error.
Controller &26 detected temporary congestion on the system I/O bus.
Disconnect retry limit reached on network interface &30.
Disconnect retry limit reached on line &23 network interface &30 during disconnect processing.
Frame reject type W received on network interface &30.
Frame reject type W received on network interface &30, line &23.
Frame reject type X received on network interface &30.
Network interface &30 information. Incoming calls limit exceeded.
Network interface &30 information. Incoming calls rejected limit exceeded.
Lack of transmit buffers on network interface &30.
Frame reject type X received on network interface &30, line &23.
ISDN message received on network interface &30 was not correct.
Invalid call reference value detected on network interface &30.
Error on network interface &30.
No response from remote equipment on network interface &30.
Protocol message received with an unexpected cause code on network interface &30.
Error on network interface &30. Internal system failure.
Error on network interface &30.
Error on network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
Frame reject type Y received on network interface &30.
Frame reject type Y received on network interface &30, line &23.
Frame reject type Z received on network interface &30.
Frame reject type Z, receive sequence count error, received on network interface &30, line &23.
Error on network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
Network interface &30 failed. Internal system fail ure.
Error on network interface &30 during get configuration request.
I/O card Licensed Internal Code for network interface &30 cannot start due to lack of resource.
Network interface &30 failed.
Protocol message received with unexpected or incorrect contents on network interface &30.
Line &23 failed.
Error on network interface &30. I/O card Licensed Internal Code has ended abnormally
Network interface &30 threshold information. Far end code violation.
Network interface &30 threshold information. Local end code violation.
Resource &27 failed.
Resource &27 failed.
Error on network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
Network interface &30 failed.
Resource &27 failed.
Error on line &23 attached to network interface &30. Internal system failure.
Token ring resource &27 status information.
Token-ring resource &27 failed.
Resource &27 failed.
Resource &27 detected a temporary error.
Overrun error threshold limit reached on line &23, network interface &30.
Short frame error threshold limit reached on line &23, network interface &30.
Aborted frames threshold limit reached on network interface &30, line &23.
Token-ring resource &27 failed.
Token ring network adapter &27 detected recoverable error.
Network interface &30 line &23 threshold information. Send sequence counter (NS) error.
Token ring resource &27 failed.
Resource &27 failed.
Error on line &23, network interface &30 failed; insufficient resource.
Error on network interface &30. Internal system failure.
Resource &27 detected temporary congestion on the system I/O bus.
Error on line &23 attached to network interface &30. Internal system failure.
Error on line &23 attached to network interface &30. Internal system failure.
Error on line &23 attached to network interface &30. Internal system failure.
Error on line &23 attached to network interface &30. Internal system failure.
Error on line &23 attached to network interface &30. Internal system failure.
Error on line &23 attached to network interface &30. Internal system failure.
Error on line &23 attached to network interface &30. Internal system failure.
Line &23 on network interface &30 failed. Internal system failure.
Frame retry limit reached on network interface &30.
Error on line &23 attached to network interface &30. Internal system failure.
Resource &27 detected a non-recoverable bus error.
Token-ring resource &26 failed.
Controller &27 detected a random interrupt.
Error on network interface &30. Internal system failure.
Error on line &23 attached to network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
Controller &26 failed.
Controller &26 failed.
Controller &26 failed.
Controller &26 failed.
Controller &27 failed.
Controller &26 failed.
Controller &26 failed.
Controller &26 detected a random interrupt.
Controller &26 failed.
Controller &26 failed.
Error on network interface &30. Internal System Failure.
Error on network interface &30. Received command field was not correct.
Error on network interface &30. A frame with an incorrect format or response was received.
Error on network interface &30.
Error on Network interface &30. A frame with an oversized information field was received.
Controller &26 failed.
Controller &26 detected a temporary error.
Controller &26 failed.
Underrun errors threshold limit reached on network interface &30.
Aborted frames threshold limit reached on network interface &30.
Retransmitted frames limit reached on network interface &30.
Send sequence errors threshold limit reached on network interface &30.
Total frames transmitted limit reached on network interface &30.
Set-asynchronous-balance-mode-extended (SABME) frame received on network interface &30.
A disconnect-mode frame was received on network interface &30.
An unsolicited disconnect-mode frame was received on network interface &30.
Receive CRC threshold limit reached on network interface &30.
Overrun errors threshold limit reached on network interface &30.
Error on line &23 attached to network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
A set-asynchronous-balance-mode-extended frame was received on line &23, network interface &30.
Disconnect-mode frame with final bit off received on line &23 attached to network interface &30.
Disconnect-mode frame with final bit on received on line &23 attached to network interface &30.
Network interface &30, line &23 failed. Frame with incorrect command field received
Frame with incorrect format or response received on line &23 attached to network interface &30.
A frame with an incorrect count was received on line &23 attached to network interface &30.
Frame with oversized information field received on line &23 attached to network interface &30.
Line &23 on network interface &30 failed, recovery stopped. Internal system failure.
Error on line &23 attached to network interface &30. Internal system failure.
Error on network interface &30.
Receive CRC limit reached on line &23, attached to network interface &30.
Line &23 attached to network interface &30, underrun errors threshold reached.
Retransmitted frames limit reached on line &23, network interface &30.
Total frames transmitted limit reached on network interface &30, line &23.
Network interface &30, line &23 status information. Counter overflow, line is running.
Network interface &30 status information. Counter overflow, network interface operational.
Resource &27 failed.
Resource &26 failed
Resource &27 failed.
Line &23 failed, recovery stopped.
Total frames received limit reached on network interface &30, line &23.
Network interface &30, line &23 Threshold Information.
Insufficient resource to start communications trace on network interface &30.
Error on network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
Line &23 on network interface &30 failed, recovery stopped. ISDN channel already in use.
Error on line &23 attached to network interface &30. Adapter card not installed.
Error on line &23 attached to network interface &30. Internal system failure.
Error on line &23 attached to network interface &30. Internal system failure.
Error on line &23 attached to network interface &30. Internal system failure.
Error on line &23 attached to network interface &30. Internal system failure.
Error on line &23 attached to network interface &30. Internal system failure.
Error on line &23 attached to network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
Error on line &23 attached to network interface &30. Internal system failure.
Error on line &23 attached to network interface &30. Internal system failure.
Error on line &23 attached to network interface &30. Internal system failure.
Error on line &23 attached to network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
Network interface &30 failed. Internal system failure.
Error on network interface &30. Internal system failure.
Network interface &30 failed. Internal system failure.
Error on line &23 attached to network interface &30.
Error on &23 attached to network interface &30. Internal system failure.
Network interface &30 threshold information. Loss of synchronization errors.
Short frame error limit reached on network interface &30.
Network interface &30 threshold information. DTSEIN error.
Network interface &30 threshold information. DTSEOUT error.
Network interface &30 threshold information.
*Attention* Resource &27 failed.
*Attention* Resource &27 failed.
*Attention* Ethernet resource &27 failed.
*Attention* Resource &27 failed.
*Attention* Resource &26 failed.
*Attention* Resource &27 failed.
*Attention* Resource &27 failed.
*Attention* Resource &26 failed.
*Attention* Resource &26 failed.
*Attention* Resource &26 failed.
Information only. External wrap test passed.
*Attention* Resource &27 removed or failed.
*Attention* Resource &26 removed or failed.
*Attention* Resource &27 failed.
*Attention* Resource &26 failed.
*Attention* Resource &26 status information
*Attention* Deferred maintenance on I/O Processor &26 is required.
*Attention* Resource &26 failed.
*Attention* Integrated Server Input/Output Processor &26 failed.
Informational only. Resource &27 detected a temporary error.
*Attention* Resource &26 failed.
*Attention* Fax adapter port &28 failed
*Attention* FAX adapter &27 failed.
*Attention* Fax adapter &27 detected a communications error.
*Attention* Fax adapter port &28 has detected a failed or missing coupler.
*Attention* Call failure. Active telephone line is not connected to port &28.
*Attention* No dial tone detected by fax adapter &27 on port &28.
*Attention* Resource &27 failed.
*Attention* Resource &24 failed.
*Attention* Resource &24 failed.
*Attention* Resource &26 failed.
*Attention* Resource &26 failed.
*Attention* Resource &26 failed.
*Attention* Deferred maintenance on I/O Processor &26 is required.
*Attention* Deferred maintenance on I/O Adapter &27 is required.
*Attention* Integrated Server Input/Output Processor &26 failed.
*Attention* Device &25 on resource &24 failed.
Informational only. Too many devices varied on to resource &24
*Attention* Error with device on work station controller &24.
*Attention* Device &25 on resource &24 failed.
*Attention* Device &25 on resource &24 failed.
*Attention* Device &25 on resource &24 failed.
*Attention* Device &25 failed.
*Attention* Resource &27 failed.
Information only. External wrap test failed.
*Attention* External wrap test failed.
*Attention* One port on Resource &27 failed.
Informational only. Too many devices varied on to resource &24
*Attention* Resource &27 failed.
*Attention* Resource &27 not supported by resource &26.
*Attention* Device configuration error occurred on resource &24.
*Attention* Integrated Server Input/Output Processor &26 failed.
*Attention* The Integrated xSeries Adapter (IXA) &27 failed.
*Attention* Integrated Server Input/Output Processor &26 failed.
*Attention* The Integrated xSeries Adapter (IXA) &27 failed.
*Attention* Integrated Server I/O Adapter &27 error.
*Attention* Resource &27 failed.
*Attention* Resource &27 failed.
*Attention* Resource &27 failed.
*Attention* Adapter &28 on Integrated Server I/O Adapter &27 failed.
*Attention* Integrated Server Input/Output Adapter &27 failed.
*Attention* Integrated Server Input/Output Processor &26 failed.
*Attention* The Integrated xSeries Adapter (IXA) &27 failed.
*Attention* Integrated Server I/O Processor &26 error.
*Attention* Resource &26 failed.
*Attention* Resource &26 failed.
File &5 member &6 number &7 received from user &1 &2.
Spooled file &5 received and placed on output queue &11 in library &12.
Input stream file &5 member &6 received from user &1 &2. &11 jobs submitted. &12 jobs not submitted
Input stream file &5 member &6 from user &1 &2 filed.
Input stream file &5 member &6 from user &1 &2 rejected.
Job &11 from user &12 job &13 not scheduled.
String not found before end of file reached.
String not found in file.
String found in column &4 in record &3.
From . . . : &1 &2 &9 &13
File &5 member &6 number &7 from user &1 &2 not filed.
Input stream file &5 member &6 number &7 from user &1 &2 not distributed.
Spooled file &5 from user &1 &2 not distributed.
Network message from user &1 &2 not distributed.
Specify string to find.
String to find cannot be null.
To find a string, press F16.
Column number not valid.
To column is before From column.
File &5 member &6 number &7 received for user &3 &4.
Hexadecimal string specified was not correct.
Spooled file &5 received for user &3 &4.
Input stream file &5 member &6 received for user &3 &4. &11 jobs submitted. &12 jobs not submitted.
Input stream file &5 member &6 for user &3 &4 filed.
Input stream file &5 member &6 for user &3 &4 rejected.
Distribution of file &5 member &6 to user &3 &4 failed.
Distribution of input stream &5 member &6 to user &3 &4 failed.
Distribution of spooled file &5 to user &3 &4 failed.
Distribution of message to user &3 &4 failed.
Message sent to &3 &4 not delivered.
File &5 member &6 number &7 for user &3 &4 not filed.
Input stream file &5 member &6 number &7 for user &3 &4 not distributed.
Spooled file &5 for user &3 &4 not distributed.
Network message for user &1 &2 not distributed.
Last record shown.
End of record shown.
First record shown.
Start of record shown.
Control field requires valid value.
Text and source information not changed on target system.
File type not recognized or file incomplete.
Last available record shown.
No network job entries
No network files
Spooled file &5 for user &3 &4 not distributed.
Kind of match not valid.
String to find is too long.
Error on distribution of spooled file to user &3 &4.
Maximum number of records exceeded for file &5 member &6.
*Attention* AIX Server &26 failed.
*Attention* AIX Server &26 failed.
*Attention* AIX Server &26 failed.
*Attention* AIX Server &26 failed.
*Attention* AIX Server &26 failed.
*Attention* AIX Server &26 failed.
*Attention* AIX Server &26 failed.
*Attention* Error on AIX Server &26
*Attention* AIX Server &26 failed.
*Attention* AIX Server &26 failed.
*Attention* AIX Server &26 failed.
*Attention* Deferred maintenance on I/O Processor &26 is required.
*Attention* Integrated Server I/O Processor &26 error.
*Attention* Optical Library resource &28 detected a failure.
*Attention* Optical Library resource &28 detected an optical drive failure.
Information only. Optical Library detected a media failure.
*Attention* Optical Library resource &27 detected a failure.
*Attention* Optical Library resource &27 detected an optical drive failure.
Information only. Optical Library detected a media failure.
*Attention* The Integrated xSeries Adapter (IXA) &27 failed.
*Attention* The Integrated xSeries Adapter (IXA) &27 detected an error.
Information only. Integrated server &27 initiated a restart.
*Attention* Windows server &27 failed.
*Attention* Resource &28 removed or failed.
*Attention* Windows server &26 failed.
*Attention* Windows server &26 detected an error.
Information only. Integrated server &26 initiated a restart.
*Attention* Deferred maintenance on I/O Processor &26 is required.
*Attention* Integrated Server I/O Processor &26 error.
*Attention* Windows server &26 failed.
Information only. Integrated PC Server &26 keyboard not detected.
Information only. Integrated PC Server &26 mouse not detected.
Information only. Integrated xSeries Adapter (IXA) &27 keyboard not detected.
Information only. The Integrated xSeries Adapter (IXA) &27 mouse not detected.
Information only. An error was detected on Integrated PC Server &27
Failure during an operation with an I/O processor
Reclaim of system cross reference files required.
Database cross reference files processed successfully.
Size of list increased.
&2 of &3 objects not in a library processed for user profile &1.
&3 &1 inserted into library &2.
&1% of objects read from disk.
File Identifier table recovery in progress.
Processing data base relationships.
Data base/library/directory recovery in progress.
Processing objects on the system.
All permanent objects have valid owners.
Object description verification in progress.
Final clean up in progress.
Mail Server Framework cleanup in progress.
Directory recovery in progress.
Directory cleanup in progress.
Message queue QSYSOPR in *HOLD delivery mode.
Estimated time for reading objects from disk is &1 hours &2 minutes &3 seconds.
Estimated time for file ID table recovery is &1 hours &2 minutes &3 seconds.
Estimated time for directory recovery is &1 hours &2 minutes &3 seconds.
Estimated time for object description verification is &1 hours &2 minutes &3 seconds.
Estimated total time is &1 hours &2 minutes &3 seconds.
Commit operation performed before ending commitment control; reason code &7.
&1 pending changes being rolled back.
Pending changes rolled back for remote resources; reason &14.
No object level changes under commitment control
No relational databases under commitment control
No remote files under commitment control
IPL recovery of commitment definition &7 for job &3/&2/&1 started.
Notify object &1 in &2 updated.
No record level changes under commitment control
Object &2 in library &3 deallocated.
Object &2 in library &3 allocated.
Commitment control implicitly started.
Local location voted read only.
Logical unit of work identifier &4 assigned to job &3/&2/&1.
&11 selected as last agent.
No remote locations under commitment control
Commitment control recovery may not be complete.
The job is not active
Commitment definition &1 has been ended.
No commitment definitions are active
No API commitment resources under commitment control
Save-while-active request requires commit or rollback for job &6/&5/&4.
Save-while-active request prevented by commitment definition.
Save-while-active request for job &3/&2/&1 ended.
Rollback operation performed during commitment control recovery; reason code &7.
&1 pending changes rolled back; reason &14.
Conflicting resource manager initialization string values ignored.
Save-while-active request prevented by externally managed transaction.
No TCP/IP connections under commitment control
Resynchronization started for commitment definition &1.
Resynchronization with location &12, device &13 attempted.
Resynchronization with location &12, device &13 complete.
No journals used for commitment control
Table &1 contains maximum number of entries.
Errors occurred during start of finance job.
Errors occurred during finance job processing.
Finance transaction in &4 failed.
Finance device &4 failed.
See second level text for commit identification.
Resynchronization with location &13, device &14 failed.
Partner LU &1.&2 is known to this system.
Journal &6 in library &7 associated with commitment definition &8.
Resynchronization with location &12, device &13 transferred to database server jobs.
Commitment definition &1 forced to &4.
Forced &7 started for commitment definition &1.
Commitment definition recovery index destroyed.
Cancel resynchronization request has started.
Local resources prepared.
One or more commitment definitions not displayed.
Post-IPL recovery of commitment definition &7 for job &3/&2/&1 started.
Partner LU &1.&2 cleared.
Save-while-active request prevented by commitment definition.
Save-while-active request for job &3/&2/&1 ended.
Resynchronization with relational database &10 attempted.
Resynchronization with relational database &10 complete.
Resynchronization with relational database &11 failed.
Forget of XA transaction branch started.
Cancel resynchronization request has started.
Resynchronization with relational database &10 transferred to database server jobs.
Image for DBCS code &2 (DBCS number &3) not copied.
Entry &1 not added to DBCS conversion dictionary.
Entry &1 not added or updated for DBCS conversion dictionary &2 in &3.
MOVE or COPY pending.
BEFORE or AFTER pending.
Emulation configuration entry &1 not found. Default values used.
Maximum screen size specified not supported by device.
Printer emulation job &3/&2/&1 resubmitted.
Dummy device support &1 provided for DSOPEN request.
Dummy device support &2 provided for DSOPEN request.
Dummy device support &2 provided for DSOPEN request.
Dummy device support provided for DSOPEN request.
Word contains consecutive hyphens. Extras removed.
Keyboard identifier accepted.
Source processed with keyboard identifier &1.
Source processed with CHRID(&1 &2).
Source file(&1 in &2) CCSID is not *HEX as recommended.
OSI Message Services journal not created.
Error occurred during OSI Message Services reclaim storage.
Error occurred during OSI Message Services recovery.
Primary keyboard map active.
Alternate keyboard map active.
An ASCII line mode connection to an IBM i host system has been opened.
This connection will end if no host program assigns device &1 within the TELNET inactivity timeout.
Connection to an IBM i host system ended because no NVT device description is available.
Connection to an IBM i host system is operational.
Data received from remote system not recognized.
SNADS recovery not complete.
Distribution queue &1 error held by sender job.
Library QUSRSYS not found.
Error occurred while sending an entry on &1 &2 queue.
Starting recovery for SNADS sender &5/&4/&3, serving *SNADS distribution queue &1
Error occurred while the QSNADS subsystem was being started.
Error(s) logged by SNADS while a distribution request was being routed.
Error occurred while doing SNADS recovery.
SNADS router &3/&2/&1 started.
SNADS cannot allocate queue space.
Errors detected on SNADS internal queues.
Error occurred while SNADS processes were being submitted.
Error occurred while using QSNADS journal.
SNADS recovery not complete. No more storage available.
No entries exist in the table.
Recovery failed for SNADS sender &3/&2/&1, serving *SNADS distribution queue &5
SNADS &5 distribution queue &4 error held by sender job.
Starting recovery for SNADS gateway sender &3/&2/&1, serving &5 distribution queue &4
Recovery failed for SNADS gateway sender &3/&2/&1, serving &5 distribution queue &4
Error occurred in SNADS exit program &2.
Extended bridge function serving &1 started.
Unable to establish session with host system.
&1
DSNX error while journaling.
List for specified DSNX/PC distribution queue is empty.
List of entries for DSNX/PC distribution queue is empty.
Queue entry deleted.
Could not create &1/&2 message queue.
&1
&5 dump for &3/&2/&1 &4
&1
Informational Only. Licensed Internal Code error.
Failure during an operation with I/O processor &26
I/O processor with resource name &26 is not operational.
Bus failure during operation with I/O processor.
Missing I/O processors or failing system bus.
Processor cannot communicate with bus extension unit
An optical system bus failure is detected.
IOP &26 has been lost due to failure of Optical Bus.
An optical system bus is lost due to a failure.
A wrap plug is installed on System bus adapter card. A bus is not used.
Processor cannot communicate with System Unit Expansion unit.
Optical bus cable is connected incorrectly.
An OptiConnect problem exists.
No matching device on remote system. Function limited.
Pass-through started at system &1.
Virtual device &1 selected at system &2.
Source system has old software. Pass-through not allowed.
Work station function started.
Automatic sign-on not allowed.
Writer &1 not held.
Writer &1 not ended.
Immediate end of target display station pass-through servers overriding a controlled end.
Target display station pass-through secondary server ended.
Target display station pass-through servers ended.
Error in exit program for the Virtual Device Selection exit point. Reason code is &1.
Immediate end of utilities server overriding a controlled end.
&1. Item on &3 at &4 added to calendar &2 &9 &10 by user &5 &6.
&1. Item on &3 at &4 changed on calendar &2 &9 &10 by user &5 &6.
&1. Item on &3 at &4 removed from calendar &2 &9 &10 by user &5 &6.
&1. &8 occurrences of item from &3 to &7 added to calendar &2 &9 &10 by user &5 &6.
&1. &8 occurrences of item from &3 to &7 changed on calendar &2 &9 &10 by user &5 &6.
&1. &8 occurrences of item from &3 to &7 removed from calendar &2 &9 &10 by user &5 &6.
&8 items from &3 to &7 added to calendar &2 &9 &10 by user &5 &6.
&8 items from &3 to &7 removed from calendar &2 &9 &10 by user &5 &6.
&1. Meeting on &3 at &4 was postponed, canceled, or removed on calendar &2 &9 &10 by user &5 &6.
User profile &1 automatically added to the local system.
Local directory entry &1 &2 was replaced.
Directory entry &1 &2 could not be updated during shadow processing.
Rename previously ended in error.
Rename job &1 submitted.
Given name has been truncated.
X.400 O/R name updates are pending. Press Enter to update.
Directory change log entry ignored for reason code &9.
Department &1 changed to &2.
Mail item has been reset from FILED status to OPENED status.
Recipient information could not be sent with the distribution because there were over &1 recipients.
Document details updated for document &2 in folder &1.
Document details deleted for document &2 in folder &1.
Document details updated for folder &2 in folder &1.
Document details deleted for folder &2 in folder &1.
System folder &3 created.
Folder &2 in folder &1 reclaimed as system folder &3.
&1 of &2 documents compared with document details.
&1 of &2 folders compared with document details.
&1 of &2 document library objects reclaimed.
All document library objects are being reclaimed.
Document details changed for &4 document library objects.
Inconsistencies possible between document library and text search index.
QDOC library nearing system object limit.
QDOC library has exceeded system object limit.
&1 of &2 objects processed for reorganization.
Distribution documents not requested for reorganization.
File &1 in library &2 not restored.
File &1 in library &2 not restored.
Exit program &5 in library &6 detached from document &2 in folder &1.
&1 of &2 objects processed.
Distribution documents not processed.
Processing &1.
Required fields displayed again with default data.
PTF &2-&1 &3 not available on the service provider system.
Problem not analyzed. Cannot send to *IBMSRV.
Value must be specified.
IBM i5/OS Software Maintenance contract will expire in less than 30 days.
IBM i5/OS Software Maintenance contract will expire in less than 60 days.
Option not allowed for this PTF order.
Part number &1 received from IBM service.
File received from &1 is not recognizable.
File arrived from unknown service provider.
Message received for QSRVBAS is not recognizable.
Problem reported to service by voice.
Machine type and serial number not recognized.
File for PTF &1 cannot be stored.
User detected a hardware problem on this AS/400.
User detected a software problem on this AS/400.
User detected a hardware problem on a different AS/400.
User detected a software problem on a different AS/400.
User detected a hardware problem not related to an AS/400.
User detected a software problem not related to an AS/400.
Preventive service planning information requested.
PTF summary information requested.
Service request did not complete.
Order supported product PTFs.
Unable to receive PTFs, message queue QSRVBAS is in use.
PTF or cover letter not found.
PTF file &1 cannot be received.
Error occurred while receiving PTFs.
Job for receiving PTFs has ended.
Error occurred while processing PTF file &1.
File received from &1 is not recognizable.
PTF object could not be deleted.
PTF object could not be renamed.
Problem &1 sent by Auto Problem Notification.
Local support dispatched.
Call in support center waiting for action.
Local support onsite.
Call delayed for first A.M. dispatch of local support.
Local support enroute to customer location.
Parts on Order.
Product engineering researching
Waiting for PTF to be generated
Product engineering onsite
Support center researching.
Problem resolved.
Waiting for documentation from customer.
Waiting for customer feedback
Problem waiting for next scheduled action.
Customer contact attempted - unsuccessful.
Customer contact attempted - please call support center
Waiting for test fix verification.
Waiting for APAR to close.
Development/Change team researching problem
Status of problem - Opened
Status of problem - Opened, service has been dispatched.
Status of problem - Closed.
Support center on site.
Development on site.
Status of problem - Closed, service was dispatched.
Universal Connection has not been configured for Electronic Customer Support.
Record requested for display was removed by another user.
Copy to *IBMSRV not allowed.
Service provider &1.&2 already exists.
Copy of *IBMSRV not allowed.
Removal of *IBMSRV not allowed.
Not allowed to add *IBMSRV.
Service provider &1.&2 added.
Service provider entry &1.&2 in use.
Type information into the highlighted fields.
No data bases installed.
Support contact information updated.
Support contact information created.
Information for service provider &1.&2 changed.
Serial number input not in correct format.
Route to IBM service cannot be deleted.
More than one option typed.
The data was pulled from the Hardware Management Console (HMC).
WRKCNTINF twice not allowed.
Required fields are missing.
Some values defaulted to system values.
The database information needs to be updated.
Cursor not in list field.
Selection must be made.
Service provider &1.&2 was removed.
Network ID not allowed when *IBMSRV specified.
Distribution queue &1 was not added.
Distribution queue &1 was added.
Route to IBM service was not changed.
Directory entry &1.&2 was not added, it already exists.
Local support dispatched.
Call in support center waiting for action.
Local support onsite.
Call delayed for first A.M. dispatch of local support.
Local support enroute to customer location.
Parts on Order.
Product engineering researching
Waiting for PTF to be generated
Product engineering onsite
Support center researching.
Problem resolved.
Waiting for documentation from customer.
Waiting for customer feedback
Problem waiting for next scheduled action.
Customer contact attempted - unsuccessful.
Customer contact attempted - please call support center
Waiting for test fix verification.
Waiting for APAR to close.
Development/Change team researching problem
Status of problem - Opened
Status of problem - Opened, service has been dispatched.
Status of problem - Closed.
Support center on site.
Development on site.
Status of problem - Closed, service was dispatched.
Received &1% of &2 total bytes, &3 minutes remaining at &4 bps.
CIM indication was generated.
Action of *CIM not allowed.
SNA DBCS 3270PCEM not started
Document name &2 not correct. It has been changed to &4.
Subdirectory name &8 not correct. It has been changed to &7.
Document &2 already exists. It has been renamed to &4.
Folder name &1 not correct. It has been changed to &4.
No remote control points exist
No link destination nodes exist
Value entered not correct.
No location names exist
List entries were removed. Refresh the list.
No locations printed for control point name &1/&2.
Control point name &1/&2 removed.
No active nodes exist
No inactive nodes exist
Session information not found
No intermediate sessions active
Intermediate session no longer active.
No endpoint session information exists
No session PCIDs exist for this job
No intermediate sessions allowed on system.
No route exists for this session
No UNBIND exists for this session
BIND contains data that is not valid.
PIU information not available for this session
Pacing information not available for this session.
Path switch requested for TCID &1.
Path switch already in progress for TCID &1.
TCID &1 not found.
End connection initiated for TCID &1.
HPR subnet route not found.
No sessions exist for the selection.
No selected RTP connections exist.
No location pairs are using the selected controller or RTP connection.
Internal error occurred in &1 operation.
No modes found for device
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Call-Progress-Signal 00 threshold on line &23.
Call-Progress-Signal 01 threshold on line &23.
Call-Progress-Signal 02 threshold on line &23.
Call-Progress-Signal 03 threshold on line &23.
Call-Progress-Signal 04 threshold on line &23.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Error occurred on Line &23.
Line &23 failed, recovery stopped.
Line &23 status information, CTS dropped warning.
Line &23 status information, line is running.
Line &23 status information, line is running.
Line &23 status information, line is running.
Line &23 status information, line is running.
Line &23 status information, line is running.
Line &23 status information, line is running.
Line &23 status information, line is running.
Port &28 failed to come up on line &23.
Communication port &28 of line &26 is already being used.
Communication port &28 of line &23 not installed.
Line &23 failed, recovery stopped.
Line &23 failed.
Line &23 error information.
Line &23 failed.
Network interface &30 status, network is running.
Line &23 failed.
Network interface &30 status, network is running.
Line &23 error information.
Communication port &28 of network interface &30 not installed.
An error occurred on line &23.
Line &23 failed.
Line &23 error information.
Error on line &23.
Line &23 failed.
Error on line &23.
No cable was detected on communication port &28 of line &23.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Error on line &23; connection cleared by network equipment.
Line &23 failed.
Line &23 failed, token-ring line is no longer connected to the ring.
Line &23 status information, token-ring active monitor reassigned, line running.
Line &23 failed during connection to the token-ring network.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Network interface &30 failed.
Network interface &30 error information.
Line &23 threshold information.
Line &23 failed during insertion into the token-ring network.
Line &23 failed during insertion into the token-ring network
Line &23 threshold information.
Line &23 threshold information.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 failed during insertion into the token-ring network.
Line &23 failed.
Line &23 failed during insertion into the token-ring network.
Line &23 failed.
Error on network interface &30.
Line &23 failed
Line &23 failed
Line &23 failed.
Line &23 failed
Line &23 failed
Line &23 failed.
Line &23 failed
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Logical channel on line &23 was reset by the local system.
Line &23 threshold information.
Line &23 threshold information.
Device &25 failed, recovery stopped.
Device &25 failed, recovery stopped.
Device &25 failed.
Device &25 failed, recovery stopped.
All logical channels on line &23 were restarted by the local system.
Logical channel on line &23 was reset by the network.
Logical channel on line &23 was cleared by the network.
Port &28 error has recovered. Line &23 is running.
Logical channel on line &23 was cleared by the local system.
All logical channels on line &23 were restarted by the network.
RESTART CONFIRM packet not received on line &23 within required time.
RESET CONFIRM packet not received on line &23 within required time.
Frame received on line &23 rejected by local system.
HDLC frame received on line &23 was rejected by the local system.
HDLC frame received on Line &23 was rejected by the local system.
HDLC frame received on line &23 was rejected by the local system.
Frame received on line &23 rejected by network.
HDLC frame sent on line &23 was rejected by the network.
HDLC frame sent on line &23 was rejected by the network.
HDLC frame sent on line &23 was rejected by the network
HDLC frame retry limit reached on line &23.
HDLC data link has been disconnected on line &23.
HDLC data link establishment failed on line &23
Line &23 status information, the system workload may be too heavy.
CLEAR CONFIRM packet not received on line &23 within required time.
Error on port &28.
The HDLC data link on line &23 was reset by the network.
Line &23 data link reset, disconnect mode (DM) frame received from network.
Resource &27 failed.
Resource &27 failed.
Resource &27 failed.
Resource &27 failed.
Line &23.
Line &23 failed.
Line &23 status information, line is running.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Port &28 status information. Line &23 is running.
Line &23 status information, CTS dropped warning.
Port &28 status information. Line &23 is running.
Line &23 failed because of configuration error.
Resource &27 failed.
Resource &27 failed.
Resource &26 failed.
Resource &26 failed.
Resource &26 failed.
Resource &26 failed.
Resource &26 failed.
Resource &26 failed.
Resource &26 failed.
Resource &26 failed.
Resource &26 failed.
Resource &27 failed.
Resource &26 failed.
DCE on network interface &30 not ready.
Resource &27 failed.
Resource &27 failed.
Resource &27 failed.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Error on Port &28.
Error on port &28.
Error on line &23.
Network interface &30 failed.
Error on communication port name &28.
Probable local hardware failure on network interface &30.
Probable local hardware failure on network interface &30.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 status information, line is running.
Line &23 status information, line is running.
Line &23 status information, line is running.
Line &23 status information, line is running.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 status information, line is running.
Line &23 failed.
Line &23 failed.
Line &23 status information, line is running.
Line &23 status information, line is running.
Line &23 failed.
Line &23 threshold information.
Port &28 status information. Line &23 is running.
Network time-out type 1 occurred on Port &28. Line &23 is running.
Network time-out type 2 occurred on Port &28. Line &23 is running.
Network time-out type 3A occurred on Port &28. Line &23 is running.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Error with device &25 on work station controller &24.
Device &25 on resource &24 failed.
Error with device &25 on work station controller &24.
Error with device &25 on work station controller &24.
Line &23 failed.
Line &23 failed.
No cable was detected on port &28 of network interface &30.
Line &23 threshold information.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 status information, token-ring adapter single station ring status.
Line &23 failed.
Line &23 status information, signal loss on token-ring network.
Line &23 status information, token-ring adapter card received beacon frame.
Line &23 status information, beacon frame transmitted, line running.
Line &23 failed, token-ring line is no longer connected to the ring.
Line &23 failed, token-ring line no longer connected to the ring.
Network call-progress-signal type 23 on port &28. Line &23 running.
Line &23 failed.
Line &23 failed.
Line &23 failed, recovery stopped.
Line &23 failed.
Line &23 failed.
Network time-out type 3B on Port &28. Line &23 running.
Line &23 failed.
Line &23 failed.
A network time-out type 7 occurred on line &23.
An error occurred on Line &23.
A network time-out type 6 occurred on line &23.
Line &23 failed.
Line &23 failed.
Line &23 error information.
Line &23 failed.
Line &23 status information, line is running.
Line &23 status information, line is running.
Line &23 status information, line is running.
Line &23 status information, line is running.
Error on network interface &30; adapter card transmit error.
Line &23 failed.
Line &23 failed.
Error on line &23; adapter card transmit error.
Line &23 failed.
Call not completed within specified time limit on line &23.
Error on port &28.
Error on line &23.
Network interface &30 failed.
Network interface &30 failed.
Network not active on network interface &30.
Line &23 status information.
Line &23 status information: Connection cleared after answer and XID exchange.
Line &23 status information: call cleared after answer, session reset.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 failed.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Token-ring resource &27 failed.
Resource &27 failed.
Token-ring resource &27 failed.
Line &23 failed.
DSR signal connection failed.
Line &23 failed.
Line &23 failed.
Line &23 status information, the system work load may be too heavy.
DIAGNOSTIC packet received on line &23.
X.25 Network Layer Protocol Error Detected on line &23.
Line &23 failed during insertion into the token-ring network.
Line &23 failed during insertion into the token-ring network.
Line &23 failed during insertion into the token-ring network.
Line &23 failed during insertion into the token-ring network.
Line &23 failed.
Line &23 failed.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Port &28 status information. Line &23 is running.
Call cannot be received for line &23. No connections available.
Line &23 cannot be varied on due to lack of IOP resources
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Line &23 threshold information.
Ethernet resource &27 failed.
Ethernet resource &26 failed.
Line &23 threshold information.
Message queue &1 in &2 not found for user &3.
Command value not supported
A command value was specified more than once.
Document interchange session started for user &1.
Negative response received from session requester.
Document interchange session partner ended processing of document interchange unit.
User ID or address field is incomplete.
No distribution lists found
User ID &1, user address &2 has more than one description.
Too many department members contained in selections made.
There are no office users
You are not authorized to work on behalf of others
Nickname selections processed.
No selections made.
Licensed program product &4 is not installed.
&1 changes made to distribution lists.
Password received from device &1 not valid.
System name and group not found. Press Enter to confirm.
Department does not exist. Press Enter to add.
No department exists in the directory
No access codes exist
No access code authorities exist
No user permissions granted
No authorized users
No access codes
No search results found.
To verify remote user access to local library, press Enter.
Storage not changed for distributions.
Information about &1 distributions not printed.
Damaged distribution &2&1&3 will be restored as new.
&6 remains the owner of document &3.
System not in restricted state, check job log after this SAVDLO command completes.
&1 user permissions changed.
&6 remains the owner of folder &4.
Document &1 restored and renamed &2.
Search results list was printed.
Manager user ID/address must exist.
Department &1 added.
Department list was printed.
Details for department &1 were printed.
Document content changes will be lost.
Too many items were selected.
Permanent error from the DIA File Server.
Reports to department does not exist. Press Enter to add.
QDOC user profile not found or damaged.
No information exists for the reports to department value.
Nickname details printed.
Details for private nickname &1 printed.
Document &3 has system object name &6.
QDOC library damaged.
Selections from the Search Results display were processed.
Department selections were processed.
No authority to change the security of document library object &1.
&1 members added to department. &2 members not added.
Input list is full. Press Enter to add members.
No authorization list to display.
Folder &4 has system object name &6.
Department has no members
Distribution to user identifier &3 &4 failed.
Distribution to user identifier &3 &4 failed.
File of document failed for user &2 at &3.
Distribution failed for user &2 at &3.
Filing of document &1 failed for user &2 at &3.
Authority changes made to document library object &1.
Mail &3 has arrived from &1 &2.
Request to index document &1 was submitted.
Request to index document &1 was not submitted.
Outfile processing successfully completed.
Distribution '&1' failed for user &2 at &3.
Some interchange document profile information not returned.
The value typed is not correct.
No document libraries exist
Library name already exists.
Name of a remote document library must be specified.
Value must be specified.
You can change only your own directory entry.
Only &2 selections allowed. &3 selections made.
Search result list name &1 changed to &2.
List is empty
&1 document library objects changed.
Auditing level changed for folder &1 in folder &2.
Distribution list has no entries
New user ID and address cannot be the same as the original.
Folder &1 cannot be restored from the save media. A new folder object will be created.
Request submitted &1 to file document into library &2 failed.
Request submitted &1 to search document library &2 failed.
Request submitted &1 to copy document from document library &2 failed.
Request submitted &1 to delete document from library &2 failed.
Request submitted &1 to change document details in library &2 failed.
Request submitted &1 to print document from library &2 failed.
&1 specified more than once.
The root folder public authority value is &1.
An important distribution arrived from &1 &2.
Private nickname &1 changed successfully.
Folder name &1 specified more than once.
Document name &1 specified more than once.
Document content not replaced.
Select options pending; other options processed.
The complete distribution directory has been printed.
The document is in use.
Directory entry for &1 &2 has been printed.
All distribution lists have been printed.
Document &1 restored as document &3.
Folder &1 restored with new name.
An important priority distribution that is private, personal or confidential has arrived.
An important and priority distribution arrived from &1 &2.
An important distribution that is private, personal or confidential has arrived.
Activate shadowing controller job using STRDIRSHD command.
Shadow controller job was not started.
Internal distribution recipient index (*DRX) is being built again for user ID and address &1 &2.
Entries in distribution list &1 &2 have been printed.
This distribution contains only a message.
Options cannot be pending when adding entries to the list.
Possible partial restore of folder &1.
User &1 in job &4/&3/&2 not authorized to use library object &5 of type *&6.
Document &3 restored without mail log entry.
New system object names not created for distributions.
Damaged mail log for user &1 will be restored as new.
No nicknames defined
Private nickname &1 added successfully.
Press Enter to accept undefined user or list ID.
A private, personal or confidential distribution has arrived.
A priority distribution that is private, personal or confidential has arrived.
&4
&4
Priority distribution arrived from &1 &2.
&1 processing for directory shadow system &2 has started.
User ID and address &2 &3 is manager for department &1.
Description '&3' added for user ID and address &1 &2.
Department manager does not exist.
User's department &1 cannot be created because the department has not been shadowed to this system.
User's location &1 cannot be created because the location has not been shadowed to this system.
Entry back out completed with errors. See previously listed messages.
No shadow systems
Rename completed with errors. See previously listed messages.
&1 processing for directory shadow system &2 has ended.
Shadowing resumed. Use Option 2 to change values for this system.
Distribution list created.
Reports to department will not exist. Press Enter to add.
Directory shadowing retry limit has been exceeded.
&1 lists copied to list &2 &3. &4 lists not copied.
&1 entries added to list &2 &3. &4 entries not added.
No locations defined
Input list is full. Press Enter to combine locations.
Location could not be combined.
Department &1 changed.
Directory attributes have been reset to default values.
Location already exists. Press Enter to confirm.
Remote database job started.
Remote database job ended.
Target DDM job started by source system.
&1 DDM conversations ended, &2 remain active.
Ending of not used DDM conversations in progress.
Following messages created on target system &1.
Additional messages created on target system.
Start of messages from command execution.
Database connection started over TCP/IP or a local socket.
Database TCP/IP or local socket connection ended.
Target job assigned to handle DDM connection started by source system over TCP/IP.
Line &1 exists as &2 type.
Line &1 already exists.
Automatic configuration turned on system-wide.
Description for controller &1 deleted.
Line &1 automatically adds personal computers.
Description for device &1 deleted.
Controller &1 or device(s) must be varied on.
Line &1 and controller &2 must be varied on.
Vary on controller &1 after attaching device(s).
Line &1 must be varied on.
Address changed to match resource &1.
Line &1 created.
Controller &1 created.
Device &1 created.
Automatic configuration was not turned on.
User &1 not enrolled to use IBM i Access.
PC added. Add another or press F3 to exit.
Auto create controllers turned on.
Auto create controllers not turned on.
Description for device &1 was not deleted.
Description for controller &1 was not deleted.
&1 needs to enroll in IBM i Access. Press Enter to enroll.
Unauthorized user ID found. User ID not listed.
&1 needs to enroll in the system directory.
&1 needs *ALL object and *AUTLMGT authority.
Administrator already exists.
No administrators in list
Application program &1/&2 ended.
Verifying APPC connection to remote location &2 on mode &1.
Allocate took &1 seconds.
Remote system type is &1.
Initial exchange took &1 seconds.
Iteration &1 took &2 seconds.
Remote location &1 submitted command &2.
No current alert focal point.
Action &4 should be specified.
No filters match the selection criteria
Data queue &4/&5 is not keyed.
Qualified filter name required.
Data queue &4/&5 not found.
X.25 network error occurred.
ISDN network error occurred.
DDM object &2 in &3 uses remote object &5.
Declare name &4 already in use for file &1 in &2 member &3.
Number of records changed to DDM target system maximum.
Declare name &4 for file &1 in &2 member &3 cannot be deleted.
Release of file &1 in &2 member &3 failed.
Some file description values ignored.
File description values ignored.
Some RGZPFM CL command parameters ignored.
*EXCLUDE authority used for USER *PUBLIC.
Some DLTF CL command parameters ignored.
The following first level text was issued by the target but did not exist on this source system
CCSID value ignored.
Declare name &4 already in use for object &1 in &2.
Declare name &4 for object &1 in &2 cannot be deleted.
Select option. Then press Enter.
Error with work station adapter &24.
A LIC error occurred on work station adapter &24.
Too many devices attached to work station adapter &24.
Job &10/&9/&8 running for controller &1.
Licensed program offering &4 is not installed.
Error with device &25 on work station controller &24.
Error with device &25 on work station controller &24.
Error with device &25 on work station controller &24.
Too many devices attached to work station controller &24.
Error with work station controller &24.
A Licensed Internal Code error occurred on work station controller.
Error with magnetic stripe reader on device &25
Error with magnetic stripe reader or selector light pen on device &25
Too many devices varied on to work station controller &24.
Device configuration error occurred on work station controller &24.
Error with device on work station controller &24.
Error with workstation I/O processor &24.
Error with workstation I/O processor &24.
Error with remote workstation controller
Failure on storage device controller card &26.
Device format error reported by storage device controller card &26.
Informational message from storage device controller card &26.
Device communication error reported by storage device controller card &26.
Failure reported by storage device controller card &26.
Failure reported by storage device controller card &26.
Failure reported by storage device controller card &26.
Failure on storage device controller card &26.
Failure reported by storage device controller card &26.
Failure on storage device controller card &26.
Device configuration error detected by storage device controller card &26.
Communication failure between system and storage device controller card &26.
Non-supported device detected by storage device controller card &26
Error on line &23.
Error on line &23.
Line &23 status information, line is running.
Line &23 status information.
Controller &24 status information.
Line &23 status information.
Error on network interface &30. Internal system failure.
Error on line &23 attached to network interface &30. Internal system failure.
Error on network interface &30. Internal system failure.
Software problem data for &1 has been logged. Refer to help text for additional information.
Software problem data for &1 has been logged. Refer to help text for additional information.
Software problem data for &4 has been detected.
Remote support VPN connection enabled for system machine type &1, serial number &2.
First Failure Data Capture data was dumped, but a problem log entry was not created.
LIC problem data has been logged for &1. Refer to help text for additional information.
Software problem data for &1 has been logged. Refer to help text for additional information.
Client software problem data for &1 has been logged. Refer to help text for additional information.
Client hardware problem data has been logged. Refer to help text for additional information.
Client software problem data for &1 has been logged. Refer to help text for additional information.
Client hardware problem data has been logged. Refer to help text for additional information.
Client usage problem data has been logged. Refer to help text for additional information.
Client problem data has been logged. Refer to help text for additional information.
Suspected program &1 not found.
Point-of-failure value not valid.
Object &1 in library &2 not found.
Error occurred in data selection exit program.
Job not authorized to object &1 in library &2.
Data length or data offset not valid.
&1 is not a valid value for the Print job log parameter.
&1 is not a valid value for the Problem log entry creation parameter.
Controller &26 failed.
Controller &26 indicates control panel problem.
Controller &26 indicates adapter &27 error.
Controller &26 indicates error on tape or disk unit.
Controller &26 indicates error on diskette unit &28.
Controller &26 failed.
Error on tape reel or cartridge, tape unit &25.
Controller &26 indicates error on device &28.
I/O processor &26 error log full.
Document &3 restored with public authority *EXCLUDE.
Folder &4 restored with public authority *EXCLUDE.
Document &3 remains secured by authorization list &6.
Line &23 status information, line is running.
Folder &4 remains secured by authorization list &6.
Text search information not restored for any documents.
Document &3 restored with public authority *EXCLUDE.
Folder &4 restored with public authority *EXCLUDE.
&6 remains the primary group of document &3.
&6 remains the primary group of folder &4.
Document &3 restored and available.
Interface error: Tape unit &25 (resource &28) or IOP &26.
IOP resource &26 recovered from temporary error.
The threshold has been reached on I/O processor &26.
I/O processor &26 failed.
A lack of resources was detected on I/O processor &26.
Partial I/O processor &26 failure occurred.
I/O processor &26 recovered from a non-critical situation.
Partial I/O processor &26 failure occurred.
Temporary Device Error.
Disk subsystem configuration error.
Disk command timeout error.
Disk Media Error.
Disk motor problem.
Data decompression hardware failure on IOP &26. IOP &26 is still operational.
Time-of-Day function has failed on IOP &26, IOP &26 is operational
IOP &26 indicates adapter &27 error.
Data compression hardware failure on IOP &26. IOP &26 is still operational.
IOP &26 failed.
Address switch setting changed on tape device &25.
Address switch failed on tape device &25.
Error on tape device &25.
Error when power turned on to tape device &25.
Error while loading tape on tape device &25.
Disk error on device &28.
Disk error on device &25.
Read error on device &25.
Diskette write error on diskette device &25.
Error on diskette device &25.
Diskette on device &25 type is not correct.
Error on diskette device &25.
Controller card failed in diskette device &25.
Address changed on diskette device &27.
Diskette device &25 failed read or write buffer test.
Diskette device &25 error.
Failure on diskette device &25.
Diskette device &25 failed and has recovered.
Diskette device &25 exceeded error threshold.
Diskette device &25 cannot respond.
Parity error on diskette device &25.
Error occurred on diskette device &25 during tests.
System logged temporary errors for diskette device &25.
Volume statistics reported to system for diskette device &25.
This service mode is not supported for diskette device &25.
Error recovery performed by diskette device &25.
One track on diskette has failed and cannot be used. Diskette can still be used.
Error detected in bus expansion adapter, bus extension adapter, System Processor, or cables
Main Storage card failure is detected.
Control panel battery either discharged or not connected.
Service processor card real time clock failed.
Control panel display not operating properly.
A tape media or tape unit &25 failure was detected.
The format of the data for the tape unit &25 is not compatible.
Licensed Internal Code error, tape unit &25.
Tape unit &25 failed.
Tape unit &25 received incorrect command or command parameter.
Two tracks on diskette have failed and cannot be used. Diskette can still be used.
User detected a diskette unit &25 problem.
Input/output processor &26 failed.
Licensed Internal Code error, I/O processor resource &26.
Input/output processor &26 does not recognize the attached device.
Read error on tape reel or cartridge, tape unit &25.
Write error on tape reel or cartridge, tape unit &25.
Asynchronous device not expected.
Either tape controller &26 or tape unit &25 failed.
Tape I/O Processor &26 failed.
Either Tape I/O Processor &26 or tape device &25 failed.
Tape I/O Processor &26 program failed.
Tape I/O Processor &26, tape device &25, or S/370 interface failure.
Tape I/O Processor &26 detected non supported device configuration.
Disk error on device &28.
Cartridge removed from tape unit &25 before processing completed
Cartridge changed in tape unit &25 before processing completed
Tape Unit &25 lost power before end-of-tape processing completed
Save entry was not deposited for data queue &1.
Optical Library &25 error occurred.
Optical Library &25 did not become ready.
Optical Library &25 data cartridge could not be moved.
Optical Library &25 autochanger failure.
Optical Library &25 autochanger failure.
Optical Library &25 power supply error.
Optical Library &25 power supply error.
Optical Library &25 optical drive not responding.
Optical Library &25 data cartridge could not be moved.
Optical Library &25 data cartridge could not be moved.
Optical Library &25 internal disk unit error recovered.
Optical Library &25 initialize element failure.
Optical Library &25 I/O station failure.
Optical Library &25 storage slot failure.
Optical Library &25 optical drive failure.
Optical Library &25 optical drive read failure.
Access panel open on Optical Library &25.
Optical Library &25 SCSI bus error.
Optical Library &25 recovered from error.
Optical Library &25 IOP error recovery.
Optical Library &25 optical drive failure.
Optical Library &25 optical drive failure.
Optical Library &25 media or drive failure.
Optical Library &25 optical drive write failure.
Optical Library &25 autochanger failure.
Optical Library &25 cartridge configuration not valid.
Optical Library &25 power on cartridge movement failure.
Optical Library &25 still contains cartridges.
Incompatible media detected by Optical Library &25.
Optical Library &25 data cartridge misplaced.
Optical Library &25 device error.
Optical Library &25 optical drive failure.
Optical Library &25 media error.
Optical Library &25 media error.
Unexpected data cartridge found for Optical Library &25.
Optical Library &25 drive status not valid
Optical Library &25 SCSI bus error.
Optical Library &25 internal failure.
Optical Library &25 failed to respond.
More cartridges than storage slots in Optical Library &25.
Optical Library &25 IOP LIC failure.
Optical Library &25 found an optical drive which is not supported.
Optical Library &25 media error occurred.
Optical Library &25 internal disk unit failed.
Optical Library &25 internal disk unit format error.
Problem ID &1 does not exist.
Problem origin ignored.
Problem origin ignored.
Positioned to &2 in address type &1.
Exact match not found for &2 in address type &1.
Node list &1 in library &2 converted.
No entries in node list
No node list entries match the selection criteria
Protected password could not be validated.
Sign-on request GDS variable was not correct.
User password could not be changed.
Message &4 returned on system call.
Password not correct for user profile.
User &4 does not exist.
Return code &4 received on call to CPI-Communications.
System failure in APPC sign-on transaction program.
NWS configuration &1 - VLDL
Automatic recovery of storage path &1 attempted.
Automatic recovery of storage path &1 successful.
Automatic recovery of virtual Ethernet path &1 attempted.
Automatic recovery of virtual Ethernet path &1 successful.
Network server storage path &1 failed.
Network server virtual Ethernet path &1 failed.
No IP security rules
Record format for file &1 in &2 does not match model file.
Unit of work identifier &4-&5-&6 assigned to job &3/&2/&1.
IBM application generated alert: &2.
User application generated alert: &2.
Operator generated alert: &2.
************************************************************************
Restore entry not deposited for object &1.
Cannot start journaling for object &1.
The journal entry for a save operation was not deposited.
Journal error, automatic journaling will be attempted.
User ID/address does not exist in SMTP table. Press Enter to add, F12 to cancel.
Private nickname &1 renamed to &2 successfully.
Press Enter to change to private nickname.
SMTP name exists for this user. Press Enter to change, F12 to cancel.
Press Enter key to add O/R name.
*ANY not allowed in user ID field.
Details for public nickname &1 printed.
SMTP table updates pending. Press Enter to update.
Private nickname &1 successfully changed to public nickname.
Public nickname &1 successfully changed to private nickname.
Owner of public nickname &1 changed from &2 to &3.
Owner of distribution list &1 &2 changed from &3 to &4.
Distribution list &1 &2 changed successfully.
Distribution list &1 &2 renamed to &3 &4.
Public nickname &1 changed successfully.
Public nickname &1 added successfully.
Public nickname &1 renamed to &2 successfully.
Private nickname &1 removed successfully.
Public nickname &1 removed successfully.
Nickname for &1 &2 not valid.
Command &1 will be replaced by command &2.
Output to file &1 in library &2 complete.
X.400 O/R name does not exist. Press Enter to add, F12 to cancel.
Search data does not exist.
User-defined field updates pending. Press Enter to update.
System message store does not exist. Press Enter to continue.
Wildcard character entered is not valid.
Field name &1 &2 does not exist.
No mail service level fields defined
Search values can affect performance. Press enter.
Press F14 to display X.400 field in error.
Press F20 to display user-defined field in error.
System directory search data created successfully.
SMTP user-defined field updates pending. Press Enter to update.
Press F19 to display the SMTP user-defined field in error.
No lines, controllers, or devices
No lines or controllers
No communications ports
Attach type &1 cable to the communications port.
SMTP data exists for this user. Press Enter to replace, F12 to cancel.
Retrieving configuration information. Please wait.
Cannot remove line &1. Line not found.
Attempting to make network operational. Please wait.
The Debug (DBG) server is currently active.
The IDP was not written to the outfile.
The original distribution will be used because the filed distribution was deleted.
Usage limit threshold exceeded for product &1.
License user &4 with &5 uses released.
All license users and their uses released.
No products to display
No product options to display
No license users to display
No license usage audit information to display.
License key information added for &1.
License key information removed for &1.
License key information installed for &1.
No license key information to display
Grace period expires in &5 days on &4.
Expiration date will be reached in &5 days on &4.
License key will not be valid in &8 days on &9.
Product &1 license information does not match.
Product &1 enabled for enterprise license keys.
A problem occurred restoring the cryptographic master keys.
The KVV is &1.
A master key value could not be restored for Master Key &1.
A restored master key value has replaced the existing value for Master Key &1.
Device description &1 may not be configured correctly.
Unrecognized device found on controller description &2.
Device description &1 is not configured correctly.
Record format processing occurred during copy.
Record format processing occurred during copy.
Object &1 in &2 has invalid type &3.
More than one name matches pattern.
Extended attribute file is not available for file system &2. Reason &1. Error number &3.
End-of-file found before physical end of file.
Stream file copied to object with truncated records.
&1 in ASP &3 is using the &2 directory format.
&1 in ASP &3 converted to the &2 directory format.
&1 in ASP &5 cannot be converted to the &2 directory format.
&1 in ASP &5 has &2 links. Estimated conversion time is &3 minutes.
&1 percent of &2 links processed. &3 minutes remaining.
&1 links processed.
Object name has been changed.
Object ownership has been changed.
Maximum storage allowed for user profile &1 has been increased.
Journaling information for object &2 with file ID &1 destroyed.
Error occurred while processing object during conversion to the *TYPE2 directory format.
Unable to find jobs with references to the object. Object has &1 reference(s).
Approximately &1 megabytes of not used disk storage is needed during directory conversion.
Approximately &3 megabytes of total disk storage will be needed after directory conversion.
Journaled file system object recovery failed. Object is &6.
Operation failed to access independent ASP scan information. Reason code &1.
A conversion function is currently processing file system &1 in ASP &2. &3 links processed.
The current run priority for the convert directory function is &1.
Scan key list inconsistencies were found. Reason code &1.
&1 in ASP &2 being converted to the *TYPE2 directory format.
Directory changed. Object is &1.
Deleted object &1.
Link removed for object &1.
Internal problem corrected for object &1.
Ownership transferred for object &1.
RCLLNK running with SUBTREE(&2) for object &1.
&1 object links reclaimed; &4 problems found. Object &5.
Default attributes may have been set for user-defined file system &2.
&1 of &2 object links processed during step &3 of &4.
&1 objects checked out. &2 objects failed.
&1 objects checked in. &2 objects failed.
&1 object links removed. &2 object links not removed.
Processing started for the &1 file system on ASP &2, reason &3.
Processing completed for the &1 file system in ASP &2, reason &3.
Processing suspended for the &1 file system in ASP &2, reason &3.
NFS version 4 locks and state released. Object is &1.
Local byte-range locks released. Object is &1.
NFS version 4 locks and state were released. File system of &1.
Encoding schemes may not be compatible.
IP over SNA activated.
No location entries
IP over SNA activated; however, all interfaces not started.
IP over SNA deactivated.
An authentication problem was encountered.
A problem was encountered in the RPC client.
TI-RPC encountered a problem in the transport protocol.
TI-RPC encountered a problem in the server.
An incorrect transport entry was found in the /etc/netconfig file.
An incorrect nettype was given.
The previous Name-to-Address Translation function has completed.
A problem occurred while trying to contact the RPCBind daemon.
RPCBind daemon cannot find an appropriate transport protocol.
Start of NFS server daemon or daemons of type &1 was successful.
End of NFS server daemon or daemons of type &1 was successful.
Failure in processing the /etc/rpcbtab file.
The file /etc/netconfig cannot be opened.
RPCBind daemon detected a remote attempt to register or unregister a service.
Move cursor and press Enter.
Window resized to maximum size.
Window resized to minimum size.
Network server &1 put in restricted state.
Network server &1 reset to active state.
Started formatting storage space &2 for server &1.
Monitor job for network server &1 ended.
Network server &1 is active.
Storage space &2 formatted for server &1.
Monitor job for network server &1 ended.
Print operation completed successfully.
User profile &2 changed successfully on server &1.
User profiles disabled on server &1
User profile &2 disabled on server &1
Vary on of the NetWare server not successful.
IPL required to complete this function for 5716SS1 Option 25, Enhanced Netware.
Unexpected error in monitor job for network server &1.
Monitor job for network server &1 started.
Partition operation started for storage space &2 on server &1.
Partition complete for storage space &2 on server &1.
Enterprise Identity Mapping (EIM) processing &2 completed for &1.
Not able to allocate object &1.
Subsystem &1 not active.
Contact successful with Enhanced Integration NLM on server &1.
Network server storage &1 found on user ASP &2.
Job or thread has no mutexes
There are no locks for the specified mutex
Job or thread is not active
&1% of directories processed.
Printing QDFTJOBD job description.
Printing list of user libraries.
Printing list of folders.
Printing system values.
Printing network attributes.
Printing edit descriptions.
Printing list of installed PTFs.
Printing reply list entries.
Printing access path recovery times.
Printing power on/off schedule.
Printing list of hardware resources.
Printing remote job entry configurations.
Printing SNADS configuration.
Printing software resources.
Enhanced Upgrade Assistant for i5/OS task &1 job submitted.
Enhanced Upgrade Assistant for i5/OS task &1 selected.
Non-observable program
Unsupported compiler
Unsupported object type
Unable to determine program observability.
&5 type &1 is not supported.
Disk preparation not complete.
CMTOPTDIR command ran.
System checksum protection currently active in ASP &1.
System is approaching IPL limit.
No objects owned by this user profile
No potential problems detected
No unsupported objects detected
Resource type &1 is not supported.
Licensed program &1 option &2 is not supported.
Delete unwanted licensed programs.
Unusable program
System value QAUTOCFG not set to 0.
System value QIPLTYPE not set to 2.
CMTOPTDIR command needs to be run.
Alternate compiler support
&3 of &2 objects in library &1 converted.
Support for licensed program &1 option &2 moved.
Disk preparation must be attended.
Disk preparation function may not be available.
Support for PRPQ &1 option &2 moved.
Disk preparation scheduled to begin at &1.
Saving reply list entries to library &1.
Saving edit descriptions to library &1.
Saving service providers to library &1.
Saving service attributes to library &1.
No media devices
Unable to reference connection profile for service configuration &1.
Unable to reference modem for service configuration &1.
Unable to reference line description for service configuration &1.
Unable to reference service mapping table for service configuration &1.
Verify processing started.
Network attribute MDMCNTRYID set to &1.
Profile &1 must be started if it has not been started already.
Service &1 is already configured.
Verification for &1 was successful.
Verification for &1 was not successful.
The value &1 does not match an existing service destination.
Subsystem QSERVER initialization complete.
User &1 from client &2 connected to server.
Protected password could not be validated.
Password not correct for user profile.
Host server error occurred with reason code &1.
Host server communications error occurred on &1.
User &4 from client &8 connected to job &3/&2/&1 in subsystem &6 in &7 on &5.
Service &1 with protocol &2 not found.
*SIGNON server job &3/&2/&1 processing request for user &4 on &5 in subsystem &6 in &7.
Servicing user profile &1 from client &2.
Ended service for user &1 on client &2.
Library &2 must be in a system or user auxillary storage pool which is not independent.
Job &1/&2/&3 started on system &4.
OptiConnect connection manager started at &1.
OptiConnect connection manager shutdown started at &1.
OptiConnect connection manager shutdown complete at &1.
OptiConnect connected to &1 using &5 at &6.
OptiConnect disconnected from &1 using &5 at &6.
An OptiConnect connection was varied off from &1 using &5 at &6.
OptiConnect disconnected normally using &1 using &5 at &6.
Testing OptiConnect connection to system &1.
OptiConnect test to system &1 successful.
Option not valid for task &1.
ENDJOB submitted for remote OptiConnnect JOB &1 on &2.
Corresponding source information from system &1.
Starting session &1
Purging session &1
Removing data member name &1 from database files.
Converting session data &1 to database files
Saving session &1.
Processed &1 Kb of data.
Adding definition &1.
Changing definition &1.
Processing &1 percent complete.
Some Performance Explorer Event Identifiers cannot be counted.
Event Counter value for Event Identifier &1 will be ignored.
Creating files. Processing &1 percent complete.
Adding file members. Processing &1 percent complete.
Clearing file members. Processing &1 percent complete.
ENDPEX is running in a secondary thread. Performance may deteriorate.
Drive &1 associated with network server &2 not deleted.
Vary on of the network server was not successful.
Command in progress, please wait.
Error occurred while using MSF log.
MSF configuration type or exit point program did not install properly.
PM Agent Scheduler successfully installed.
PM Agent job already running.
Collection Services is not running. PM Agent requires the Collection Services to be running.
PM Agent is activated. Update contact information at earliest convenience.
PM Agent not activated. Activate at earliest convenience.
PM Agent already started.
Network server &2 has been added as a directory entry under /QNTC, but is not a recognized server.
Ending all subsystems.
Restoring library &1.
No licensed programs on the source release are replaced by this selection
** - Some conversion times not estimated.
Saving libraries at priority &1.
All values reset to their original default values.
Recovering from a damaged upgrade environment.
Processing information, please wait.
&1 information successfully collected.
Object conversion time for library &1 estimated.
No modifications required for user profiles.
No modifications required for output queues.
No modifications required for job descriptions.
System information for type &1 not updated.
Restoring objects into library &1.
*&1 completed successfully.
Printing list of journals.
Printing subsystem descriptions.
Printing journaling information.
Printing configuration lists.
Printing network server storage information.
Printing service attributes.
Printing cleanup information.
Restoring upgrade environment.
Restoring user profiles.
Restoring device configuration objects.
Restoring *NONSYS libraries.
Reclaiming document library objects.
Restoring document library objects.
Restoring directories.
Restoring private authorities.
Updating system information for type &1.
Configuring media devices.
Varying on attached controllers and devices.
No libraries with unsupported objects found
No disk preparation jobs scheduled.
Setting system values to transition settings.
No priority entries
No libraries in conversion list
Setting user profile storage limits to *NOMAX.
Setting QUSRLIBL and QSYSLIBL system values.
Granting authority for disk preparation.
Setting system value QPFRADJ for upgrade.
Setting system directory entries.
Digital signature lost for object &1.
Setting job descriptions.
Setting QSECOFR user profile values.
Profiling data lost for object &2.
Resetting user profile storage limits.
Resetting QUSRLIBL and QSYSLIBL system values.
Setting QDFTJOBD job description.
State of object &2 changed to *USER.
Resetting QSECOFR user profile values.
Resetting job descriptions.
&1 option &2 selected for removal from the planning list for the target release.
Printing current disk configuration.
No software to be deleted
No user libraries found
Object &2 has not been converted.
Printing optical device configurations.
Object has not been converted. Object is &3.
Values set from previous downtime estimate.
Updating maximum allowed storage for user profile &1.
Saving system values to library &1.
Saving network attributes into library &1.
Maximum allowed storage for user profile &1 changed from &2 to *NOMAX.
No priorities found
Compressed object
Library &1 removed from system value &2.
Ownership of output queue &1 in library &2 changed from &3 to &4.
Library list entry &1 removed from job description &2 in library &3.
Maximum allowed storage for user profile &1 changed from *NOMAX to &2.
Library &1 added to system value &2.
Library list entry &1 added to job description &2 in library &3.
Printing user profile information for QSECOFR.
Licensed program &1 must be upgraded.
Disk units may need to be reformatted.
Source system contains too many disk units to migrate.
Digital signature for object removed. Object is &2.
Resetting QDFTJOBD job description.
There are no publicly authorized DLO objects to list
There are no user profiles to list
No publicly authorized job descriptions with a user name specified
There are no objects to list
There are no authorization lists to list
There are no queues to list
There are no DLO objects to list
No subsystem descriptions that contain default users were found.
There is no communications information to list
There are no user profiles with default passwords to list
No objects that adopt user profile authority were found.
User profile &1 disabled.
User profile &1 not disabled.
There are no publicly authorized objects to list
User profile &1 deleted.
User profile &1 not deleted.
Error occurred during &1 processing.
User profile &1 not enabled.
User profile &1 enabled.
User profile &1 not enabled.
User profile &1 disabled.
User profile &1 not disabled.
User profile &1 disabled.
User profile &1 not disabled.
User profile &1 already disabled.
Request of statistic collection(s) running.
Delete of statistic collection(s) running.
Update of statistic collection running.
Cancel of statistic collection request(s) running.
&1 currently exported.
There are no objects currently exported.