Messages

Complete Message Docu Documentation From BDT_CONSISTENCY_CHCK up to BUS_LOCATOR104

This documentation is copyright by SAP AG.
Count: 3767 Skipped: 6
Message Docu
Description
Invalid combination of &1 views, &2 applications, and &3 data sets ( BDT_SUBSCREEN 100 )
Handle &1 not found ( BDT_SUBSCREEN 101 )
All available subscreen containers with tab strips are in use ( BDT_SUBSCREEN 104 )
Controlling area & does not exist ( BE 001 )
Area currency & used as transaction currency ( BE 002 )
Document number & already exists ( BE 003 )
Document number & does not exist ( BE 006 )
Document item & does not exist ( BE 007 )
Document number & belongs to another document category ( BE 008 )
Deletion indicator already set in document -> display mode ( BE 009 )
No item deleted ( BE 010 )
& item(s) deleted/completed ( BE 011 )
No completion indicator reset ( BE 012 )
& completed item(s) reset ( BE 013 )
Enter conversion factors ( BE 015 )
No conversion factors necessary for item & ( BE 017 )
No history exists for item & ( BE 018 )
No item marked as completed ( BE 019 )
& item(s) marked as completed ( BE 020 )
Number range & does not exist ( BE 022 )
Number range interval & for number range object & almost exhausted ( BE 023 )
Number range interval & for number range object & exhausted ( BE 024 )
Number range interval & for number range object & not maintained ( BE 025 )
Number range object & does not exist ( BE 026 )
External number assignment not available ( BE 027 )
External number range: enter document number ( BE 028 )
Document number & is outside the valid range ( BE 029 )
Company code & does not exist ( BE 030 )
Retention period is less than the minimum prescribed by SAP ( BE 035 )
Document type & for document & does not exist ( BE 037 )
The key date must not be in the future ( BE 040 )
Material number & does not exist ( BE 050 )
Vendor & does not exist ( BE 051 )
WBS element & does not exist ( BE 052 )
Order & does not exist ( BE 053 )
Purchase order number & does not exist ( BE 054 )
Purchase order item & does not exist ( BE 055 )
Purchase requisition & does not exist ( BE 056 )
Purchase requisition & item & does not exist ( BE 057 )
Document number & does not exist ( BE 058 )
No data exists ( BE 060 )
Document & already being processed ( BE 080 )
System error when locking & ( BE 081 )
The line has already been canceled ( BE 083 )
Negative amounts not allowed ( BE 084 )
Reduction amount must not exceed the open amount ( BE 085 )
Reservation amount must not be less than the amount reduced ( BE 086 )
CO reference document & will not be canceled automatically ( BE 087 )
Item &: Reduction record for reservation &/& will not be canceled ( BE 088 )
Positive amounts not permitted ( BE 089 )
Amount must not be more than the amount open in & ( BE 090 )
Amount must not be less than & ( BE 091 )
Amount & is too much ( BE 092 )
Enter due date ( BE 095 )
Cost element & is not a primary cost element ( BE 098 )
Enter a cost element ( BE 099 )
Cost element & does not exist ( BE 100 )
Order & does not exist ( BE 101 )
Order & not assigned to controlling area & ( BE 102 )
Enter amount ( BE 103 )
Enter amount or price/quantity combination ( BE 104 )
Enter unit of measure ( BE 105 )
Enter price ( BE 106 )
Enter a quantity ( BE 107 )
Enter a positive quantity ( BE 108 )
Enter a negative quantity ( BE 109 )
Quantity unit/price unit conversion factor set at 1 ( BE 110 )
Document number & does not exist in company code &, fiscal year & ( BE 120 )
Item & for document & does not exist ( BE 121 )
No create authorization for document type & in company code & ( BE 140 )
No change authorization for document type & in company code & ( BE 141 )
No display authorization for document type & in company code & ( BE 142 )
No archiving authorization for document type & in company code & ( BE 143 )
No reduction authority for document type & in company code & ( BE 144 )
Enter a revenue element ( BE 201 )
& is not a revenue element ( BE 202 )
WBS element & is the top element in the WBS hierarchy ( BE 210 )
WBS elements & and & both belong to subproject & ( BE 211 )
Activity not allowed for statistical WBS element & ( BE 212 )
Activity not allowed across company codes ( BE 213 )
Transaction not valid across business areas ( BE 214 )
Enter a version for the fixed price document update ( BE 220 )
Version & already in use ( BE 221 )
Data may be lost if you change the version. ( BE 222 )
DB error in fixed price version update ( BE 224 )
No text for fixed price version in language & ( BE 225 )
Agreed amount must not be less than the the amount cleared ( BE 230 )
Fixed price agreement & does not exist ( BE 301 )
Document & is not a fixed price agreement ( BE 302 )
Fixed price agreement & no longer exists ( BE 303 )
Document & contains no items relevant to clearing ( BE 310 )
Item &: cost element & does not agree with the reservation ( BE 401 )
Transaction currency & does not agree with reservation currency & ( BE 402 )
Item &: account assignment does not agree with the reservation ( BE 403 )
Item &: reservation document item &/& already created ( BE 404 )
Item &: reservation document item &/& already deleted ( BE 405 )
Item &: sender account assignment does not agree with the reservation ( BE 406 )
Select at least one document type ( BE 501 )
Specify a document type ( BE 525 )
You must not use document type & ( BE 530 )
Document type & does not exist ( BE 535 )
Internal error for & & & ( BE 899 )
Inconsistent data in control ( BEA 000 )
Function module &1& not called correctly ( BEA 001 )
Application was reset ( BEA 003 )
Report &2 not found in application &1 - application reset ( BEA 004 )
Serious error in data management (action was terminated) ( BEA 050 )
No applications found ( BEA 099 )
Error during INSERT to table &1 (RC = &2) ( BEA 100 )
Error during UPDATE to table &1 (RC = &2) ( BEA 101 )
Error during DELETE in table &1 (RC = &2) ( BEA 102 )
Invalid unit of measure for BDL item &1 of transaction &2 ( BEA 105 )
Different integration types for billing types &1 and &2 (transaction &3) ( BEA 107 )
Billing unit cannot be determined from business scenario &1 ( BEA 109 )
Cannot determine billing unit ( BEA 110 )
Cannot check for intercompany billing ( BEA 111 )
Assign an item category for customer billing ( BEA 113 )
Assign an item category for intercompany billing ( BEA 114 )
No condition type available for determining the billing unit ( BEA 117 )
Error in transaction history for bill. due list item &1 (transact. &2) ( BEA 119 )
Error in transaction history for billing document &1, item &2 ( BEA 120 )
Error in transaction history for billing document &1 ( BEA 121 )
Select one document ( BEA 122 )
Could not create billing document ( BEA 125 )
Invalid billing status (&1) detected in billing due list ( BEA 126 )
No cancelled document found for cancellation billing document &1 ( BEA 129 )
No log is available ( BEA 134 )
You are not authorized to select all the records ( BEA 136 )
Collective run number &1 is not numerical ( BEA 137 )
No creator/changer was selected; check entry &1 ( BEA 138 )
Derivation not intended for item category &2, determination procedure &1 ( BEA 145 )
Intercompany billing not intended for billing relevance &1 ( BEA 146 )
No supplementary invoice recipient is contained in the billing due list ( BEA 147 )
No split-relevant condition type is contained in the billing due list ( BEA 148 )
Payer &1 is not intended for the condition split ( BEA 149 )
The condition for intercompany billing is not met ( BEA 150 )
Assignment of the vendor is missing for the company code ( BEA 152 )
You can change texts but not conditions ( BEA 161 )
Unable to transfer billing document &1 ( BEA 162 )
You can run a split analysis for two entries only ( BEA 163 )
Serious error in data management (action was terminated) ( BEA 164 )
Serious error in control processing (action was terminated) ( BEA 165 )
Serious error in ALV instance management (action terminated) ( BEA 166 )
No split reason found for billing document &1 and &2 ( BEA 167 )
Billing document &1 does not have any items ( BEA 169 )
Certain items have been excluded from processing ( BEA 173 )
The dependent billing due list item could not be defined ( BEA 175 )
Database access error ( BEA 180 )
Item category &1 of item &2 for transaction &3 is not available ( BEA 205 )
Due list items for preceding item &1 trans &2; product does not match ( BEA 207 )
Define the usage "Product" in the metadata ( BEA 208 )
Document number pool almost empty ( BEA 210 )
The last possible document number has just been assigned ( BEA 211 )
Billing document &1 is blocked (user &2) and cannot be transferred ( BEA 214 )
Billing document &1 is blocked - cancellation not possible ( BEA 216 )
You cannot perform this action for cancellation document &1 ( BEA 217 )
Unable to offset billing item &1 &2 ( BEA 218 )
You cannot cancel billing document &1 due to its transfer status ( BEA 219 )
Billing due list item &1 has aleady been billed ( BEA 221 )
Item &1 of transaction &2 not available; billing not possible ( BEA 222 )
Inconsistent input for billing document &1 - cancellation rejected ( BEA 224 )
Unable to cancel billing document &1 in its entirety ( BEA 225 )
Item &2 for billing document &1 was already cancelled ( BEA 227 )
Settled billing due list item &1 trans &2 has no reference to bill. item ( BEA 229 )
No billing document found for internal ID &1 ( BEA 231 )
Billing due list item &1 is blocked for billing ( BEA 232 )
Billing item &1 was not cancelled due to data inconsistency ( BEA 233 )
Transfer status of billing document &1 inconsistent ( BEA 234 )
No accounting documents exist for the selected billing document ( BEA 236 )
Item &1 of transaction &2 is incomplete ( BEA 237 )
Billing document &1 may not be cancelled as it was selected for archiving ( BEA 239 )
Assignment of item &1 of transaction &2 to a difference group was changed ( BEA 242 )
No tax document can be saved for billing document &1 ( BEA 243 )
It is not necessary to save a tax document for &1 billing documents ( BEA 249 )
DL item &1 transaction &2 has billing relevance &3, but no dependent item ( BEA 253 )
No accounting documents exist for the settlement document selected ( BEA 257 )
Change for interco. billing: Due list item &1 for trans. &2 incomplete ( BEA 261 )
Change for interco. billing: Due list item &1 for trans. &2 incomplete ( BEA 262 )
BDL item &1 transaction &2 not available; derivation for IB not possible ( BEA 263 )
Due list item &1, trans. &2 cannot be processed because of incorrect data ( BEA 264 )
Change to condition split: BDL item &1 for transaction &2 incomplete ( BEA 267 )
Cancellation not possible; currency &2 of &1 has expired ( BEA 270 )
Billing failed due to missing exchange rate between &1 and &2 ( BEA 272 )
Expired currency &2 replaced by currency &3 in billing document &1 ( BEA 273 )
Cannot replace expired currency &1 of transaction &3, item &2 ( BEA 274 )
Item &1 of transaction &2 has not yet been billed ( BEA 282 )
Billing item for item &1 of transaction &2 not available ( BEA 283 )
Billing document &1 is blocked; difference calculation not possible ( BEA 284 )
Billing header for item &1 of transaction &2 not available ( BEA 285 )
Data inconsistency: item &1 of transaction &2 not in difference group ( BEA 286 )
Difference group for item &2/&1 contains unbilled items ( BEA 287 )
Difference group for item &2/&1 has gaps ( BEA 288 )
Data inconsistency: item &1 of transaction &2 has no predecessors ( BEA 289 )
The requested number is greater than the amount of available numbers ( BEA 290 )
Collective run GUID not the same as that of buffer (internal error) ( BEA 301 )
A collective processing run has already been created ( BEA 302 )
Function module &2 does not exist ( BEA 303 )
You are not authorized to change billing documents of billing type &1 ( BEA 309 )
You are not authorized to change billing docs from billing org. unit &2 ( BEA 310 )
Value date cannot be changed for documents with this transfer status ( BEA 311 )
Item category &1 does not exist in application &2 ( BEA 402 )
Billing type &1 does not exist in application &2 ( BEA 403 )
No billing types exist for application &1 ( BEA 404 )
No item categories exist for application &1 ( BEA 405 )
Billing details deleted for all dependent items ( BEA 406 )
Transfer block will be deleted for pro forma billing types ( BEA 411 )
Partial settlement not possible for billing type &1 ( BEA 412 )
Availability control profile ID cannot be set for billing type &1 ( BEA 413 )
Partial settlement not possible for due list item &1 (transaction &2) ( BEA 414 )
You are not authorized to output documents for &1/&2/&3 ( BEA 420 )
Structure names of repository for application &1 are inconsistent ( BEA 422 )
Table type names of repository for application &1 are inconsistent ( BEA 423 )
Function module names of repository for application &1 are inconsistent ( BEA 424 )
&1 &2: Error occurred during partner processing ( BEA 426 )
&1 &2: Payment term &3 does not exist ( BEA 427 )
&1 &2: Error occurred when reading pricing document ( BEA 428 )
Container name not defined for billing header in application &1 ( BEA 429 )
Container name not defined for billing item in application &1 ( BEA 430 )
Unable to process actions immediately ( BEA 431 )
You are not authorized to execute the archiving program ( BEA 502 )
Billing document &1 is blocked (user &2); archiving is not possible ( BEA 503 )
&2 &3 still exists in system &4; archiving of billing doc &1 not possible ( BEA 504 )
No active archive information structures are available for object &1 ( BEA 505 )
Cancelled billing doc &2 was not archived; no archiving cancellation &1 ( BEA 506 )
No residence times maintained for document ( BEA 507 )
Unable to determine item category for BDL item &1 for transaction &2 ( BEA 551 )
Select only whole documents for individual billing ( BEA 607 )
You are not authorized to process one or more of the items selected ( BEA 612 )
Determination of CO account assignment was canceled due to an error ( BEA 650 )
No Business Add-Ins defined for application &1 ( BEA 700 )
The business add-ins for application &1 do not have any methods ( BEA 701 )
Unable to execute function in question for this line ( BEA 706 )
Business Add-In definition &1 does not exist ( BEA 707 )
There is no error log for collective run number &1 ( BEA 750 )
A collective processing run has not yet been created in this transaction ( BEA 757 )
No error messages found; illegal transfer status &1 ( BEA 758 )
No BDoc with error messages could be found for billing document &1 ( BEA 762 )
No error messages found for billing document &1, BDoc &2 ( BEA 764 )
&1 &2 &3 &4 ( BEA 766 )
The component &1 is not defined in structure &2 (program &3) ( BEA 780 )
It is not possible to allocate type &2 to structure &1 (program &3) ( BEA 781 )
Application &1 object not determined from classic part of BDoc ( BEA 782 )
Collective billing is only relevant when several entries are selected ( BEA 797 )
Documentation? -> Long Text ( BEA 798 )
Billing type &1: partner det. proc. not defined, "&2" cannot be displayed ( BEA 800 )
Billing type &1: pricing proc. not defined, "&2" tab cannot be displayed ( BEA 801 )
Billing type &1: text det.proc. not defined, "&2" tab cannot be displayed ( BEA 802 )
Billing type &1: action profile not defined, "&2" tab cannot be displayed ( BEA 803 )
Item cat. &1: partner det.proc. not defined, "&2" tab cannot be displayed ( BEA 804 )
Item cat. &1: text det. proc. not defined, "&2" tab cannot be displayed ( BEA 805 )
Item cat. &1: partner det.proc. not defined, "&2" tab cannot be displayed ( BEA 806 )
Item cat. &1: pricing procedure not defined, "&2" tab cannot be displayed ( BEA 807 )
Item cat. &1: text det. proc. not defined, "&2" tab cannot be displayed ( BEA 808 )
Billing document item is not relevant for pricing ( BEA 809 )
Internal logging error ( BEA 863 )
Unidentified error occurred when calling &1 ( BEA 874 )
Internal error in function module &1 ( BEA 879 )
A log handle already exists in the global memory of the function group ( BEA 899 )
Collective billing is only relevant when several entries are selected ( BEA 997 )
Documentation? -> Long Text ( BEA 998 )
No condition generation type assigned for the planning type &1 ( BEAS_CNPL 017 )
No campaign determination procedure found ( BEAS_CNPL 018 )
The system could not find a representative product for category &1 ( BEAS_CNPL 023 )
The system could not find a representative product for group &1 ( BEAS_CNPL 024 )
Could not lock preceding transactions for billing document &1 ( BEA_ACC 010 )
Could not update preceding transactions for billing document &1 ( BEA_ACC 011 )
You can review the process log in transaction SLG1 ( BEA_ACC 020 )
Not enough authorized amount available for billing document &1 ( BEA_ACC 022 )
Transaction BEA_ACD_START was called without a function code ( BEA_ACD 000 )
Select a Billing Engine Application ( BEA_ACD 001 )
No condition technique application was determined ( BEA_ACD 002 )
Determined transaction code &1 is not defined in the system ( BEA_ACD 003 )
Function code &1 is not defined as a fixed value in domaine &2 ( BEA_ACD 004 )
No action defined for function code &1 (report &2) ( BEA_ACD 005 )
No account determination type is assigned to application &1 ( BEA_ACD 006 )
No revenue account determined for bill doc &1 / item &2 / cond. type &3 ( BEA_ACD 007 )
Account determination type &1 not available for condition tech. appl &2 ( BEA_ACD 008 )
Error in control processing. Objects of class &1 were not generated ( BEA_ACD 009 )
Field name &1 not found in working set ( BEA_ACD 010 )
Input value &1 does not exist; specify a permitted value ( BEA_ACD 011 )
Account determination for document &1, item &2, cond. type &3 incomplete ( BEA_ACD 012 )
Feature &1 of application &2 has not yet been activated ( BEA_ACD 013 )
No reconciliation account found for billing doc &1 item &2, cond. type &3 ( BEA_ACD 014 )
Item &1 of transaction &2 cannot be settled due to a technical error ( BEA_CFM 001 )
Prepayment should not be canceled; referenced by invoice claim &1 item &2 ( BEA_CFM 005 )
Prepayment should not be canceled; contains errors ( BEA_CFM 006 )
Cannot cancel settlement; Control of claim submission returned to ERP ( BEA_CFM 008 )
System cannot find an account for price simulation ( BEA_CLASS_N1_UI 000 )
System cannot find price simulation settings ( BEA_CLASS_N1_UI 002 )
System cannot find the condition generation type ( BEA_CLASS_N1_UI 005 )
Document number pool almost empty ( BEA_CNPL 210 )
The last possible document number has just been assigned ( BEA_CNPL 211 )
Price list type &1 not available ( BEA_CNPL 403 )
Item threshold &1 exceeded; price document closed ( BEA_CNPL_EN 010 )
Data are outdated, restart your process from the result list ( BEA_DL_UIU 007 )
Invoice document must be cancelled ( BEA_FCB 001 )
No tax code mapping found for dep.country &1/tax code &2/dest. country &3 ( BEA_ICV 001 )
You cannot cancel billing doc. &1 due to its IC payables status ( BEA_ICV 010 )
IC payables status of billing document &1 inconsistent ( BEA_ICV 011 )
Intercompany payables status of billing document &1 inconsistent ( BEA_ICV 052 )
You can change texts but not conditions ( BEA_ICV 055 )
Cannot determine which country billing unit &1 is in ( BEA_ITL 051 )
Error has occured when processing data for POR inpayment slip ( BEA_ITL 073 )
Print character not maintained for tax groups &1 and &2 &3 ( BEA_ITL 102 )
Number group not maintained for official document numbering ( BEA_ITL 103 )
Cannot generate official document number ( BEA_ITL 105 )
Cannot generate official document number ( BEA_ITL 106 )
Cannot generate official document number ( BEA_ITL 107 )
Business place not assigned to billing unit &1 ( BEA_ITL 109 )
Number Format &1 contains non numeric fields ( BEA_ITL 110 )
Official Document Number is not set ( BEA_ITL 111 )
Billing Document &1 has not been transfered to R/3 back-end system ( BEA_ITL 112 )
Almost no more possible official document numbers left ( BEA_ITL 113 )
The last possible official document number has just been assigned ( BEA_ITL 114 )
Document class &1 does not exist ( BEA_ITL 116 )
Reference billing document missing ( BEA_ITL 117 )
Cannot determine official document number ( BEA_ITL 118 )
Official Document Number &1 contains non mumeric fields. ( BEA_ITL 125 )
Print character needs to be maintained only for Argentina ( BEA_ITL 127 )
Enter a valid format ( BEA_ITL 128 )
Enter a valid number range ( BEA_ITL 129 )
Number format &1 is longer than the allowed length of 10 digits ( BEA_ITL 130 )
One of the braces ({) or (}) is missing ( BEA_ITL 139 )
Official document number format does not support the character "&1" ( BEA_ITL 140 )
You cannot use asterisks (*) in conjunction with other characters ( BEA_ITL 141 )
The official document number is longer than the allowed length of 16 ( BEA_ITL 144 )
Combination of format and generation time not supported ( BEA_ITL 147 )
Document class has no official document number format ( BEA_ITL 148 )
Official document no range not found for generation of digital signature ( BEA_ITL 175 )
Official document &1 not found in /1bea/crmb_bdh table; a gap exists ( BEA_ITL 176 )
Cannot generate digital signature; feature not enabled in customization ( BEA_ITL 179 )
Enter Valid Format for country Portugal ( BEA_ITL 182 )
No Official document number is transferred to accounting ( BEA_ITL_BR 002 )
Error has occured when processing data for Indian excise duties output ( BEA_ITL_IN 001 )
Excise group not assigned to billing unit &1 ( BEA_ITL_IN 002 )
Due list item &1 for transaction &2 incomplete due to rejection ( BEA_LCB 000 )
Change made to a billed settlement period ( BEA_LCB 001 )
Unable to create any partners for the billing due list item ( BEA_PAR 002 )
Unable to supplement data with partner data ( BEA_PAR 003 )
Check was run on partner determination procedure &1 - errors detected! ( BEA_PAR 009 )
Unable to determine &2 for the billing header ( BEA_PAR 010 )
Unable to determine &2 for the billing item ( BEA_PAR 011 )
Item &1 for transaction &2 is incomplete due to missing partner data ( BEA_PAR 012 )
Partner function &1 category &2 - parameters transferred incorrectly ( BEA_PAR 016 )
Unable to open pricing document ( BEA_PRC 003 )
Error in Business Add-In management (mapping for pricing) ( BEA_PRC 004 )
Internal error during pricing ( BEA_PRC 005 )
Pricing Incomplete ( BEA_PRC 007 )
Unable to create pricing doc. for procedure &1 - header data incorrect ( BEA_PRC 102 )
Error copying tax data to the cancellation document ( BEA_PRC 116 )
Attribute &1 is not considered in pricing at present ( BEA_PRC 306 )
Extract type for preceding document &1 could not be determined ( BEA_R1 008 )
Error when determining the pricing procedure ( BEA_R1 009 )
The extract reference table could not be determined ( BEA_R1 010 )
The extract index table could not be determined ( BEA_R1 011 )
Extract item for deletion is not in database ( BEA_R1 012 )
Error when writing off old extract entries from the rebate due list ( BEA_R1 013 )
An extract document for the preceding document &1 is being transferred ( BEA_R1 014 )
Access analysis can only be displayed after reprocessing ( BEA_R1 031 )
Extract document &1 could not book into the due list ( BEA_R1 040 )
Function module &1 does not exist ( BEA_R1 052 )
No period information available ( BEA_R1 056 )
This extract type cannot be processed with this transaction ( BEA_R1 057 )
Enter a document ID ( BEA_R1 058 )
Requested value could not be granted ( BEA_R1 059 )
Preceding document &1 not updated; item &2: error for block ( BEA_R1 100 )
An extract type with the same key already exists ( BEA_R1 122 )
A settlement document type with the same key already exists ( BEA_R1 123 )
Agreement &1: Process in settlement profile &2 not permitted ( BEA_R1 151 )
It was not possible to determine a BDoc with error msgs for sett. doc. &1 ( BEA_R1 158 )
Settlement document &1 cannot be transferred ( BEA_R1 160 )
It was not possible to determine error msgs for sett. doc. &1 - BDoc &2 ( BEA_R1 163 )
No items found for settlement document &1 ( BEA_R1 164 )
Sett. type &1: no partner determ. proc. maintained: Tab &2 not visible ( BEA_R1 165 )
Settlement document item is not relevant to pricing ( BEA_R1 166 )
Settlement type &1: no pricing procedure maintained; tab &2 not visible ( BEA_R1 167 )
Determination of CO account assignment was cancelled due to an error ( BEA_R1 171 )
Settlement document &1 is being transferred ( BEA_R1 181 )
Error in BAdI management (mapping of rebate relevance check) ( BEA_R1 182 )
Plus/minus sign of rollover amount was changed automatically ( BEA_R1 191 )
Agreement &1: billing unit could not be determined ( BEA_R1 210 )
Agreement &1 created with error due to lock error ( BEA_R1 211 )
Agreement &1 created incorrectly due to authorization error ( BEA_R1 212 )
Agreement &1: reference currency could not be determined ( BEA_R1 213 )
Agreement &1: rebate profile could not be determined ( BEA_R1 214 )
Agreement &1: cumulation profile could not be determined ( BEA_R1 215 )
Agreement &1: no payment records exist ( BEA_R1 216 )
Condition &1 for agreement &2 not updated; not all data processed ( BEA_R1 218 )
&1: No valid settlement date until default date ( BEA_R1 220 )
Changes made to agreement &1 after final settlement ( BEA_R1 221 )
Some entries have been excluded from processing ( BEA_R1 223 )
Settlement is not possible ( BEA_R1 301 )
Customizing mismatch; item &1 is relevant for fund-based accruals ( BEA_SDB 003 )
No company code found for billing unit &1 ( BEA_SLL 001 )
Select a billing document ( BEA_SLL 002 )
Select one billing document only ( BEA_SLL 003 )
No foreign trade documents found for selected billing document ( BEA_SLL 004 )
Text determination for text object &1: error detected in method &2 ( BEA_TXT 000 )
Mandatory texts missing for billing header &1 ( BEA_TXT 052 )
Text processing error occurred for billing item &1 &2 ( BEA_TXT 057 )
Text processing error occurred for billing header &1 ( BEA_TXT 058 )
Text processing error occurred for billing due list item &1 in trans &2 ( BEA_TXT 059 )
Mandatory texts are missing for billing due list item &1 in trans &2 ( BEA_TXT 060 )
Mandatory texts are missing for billing item &1 &2 ( BEA_TXT 061 )
Item rejected due to incompleteness ( BEA_XIF 001 )
Transaction &1/&2/&3/&4 exists more than once ( BEA_XIF 002 )
No header information on container &1 structure &2 ( BEF_BASICS 201 )
Error occurred when calling where-used list for metadata ( BEF_BASICS 202 )
Structure of Container &1 is inconsistent ( BEF_BASICS 203 )
Error when determining interface for method &1 ( BEF_BASICS 501 )
Unable to read template &1 ( BEF_BASICS 800 )
Messages that could not be writted to the generation log ( BEF_BASICS 866 )
Messages that resulted errors when being written to the Application Log ( BEF_BASICS 867 )
Error occurred when calling &1 ( BEF_BASICS 874 )
There are no logs for application &1 ( BEF_BASICS 881 )
There is no log for this generation run ( BEF_BASICS 883 )
Error occurred when calling &1 (when writing message &3&1(&2)) ( BEF_BASICS 890 )
Error message issued when writing message &3&1(&2) ( BEF_BASICS 891 )
Unable to write message &3&1(&2): log &4 is full ( BEF_BASICS 892 )
Message &3&1(&2) inconsistent ( BEF_BASICS 893 )
Message &3&1(&2) was issued before the log header was created ( BEF_BASICS 896 )
Message &1(&2) was issued using unknown message type (&3) ( BEF_BASICS 897 )
The log header is inconsistent ( BEF_BASICS 898 )
A log handle already exists in the global memory of the function group ( BEF_BASICS 899 )
Data inconsistency in metadata table &1 (program terminated) ( BEF_CUSTOMIZING 100 )
Container &1 does not exist ( BEF_CUSTOMIZING 138 )
No function group defined for applic. &1, obj. &2, service &3, layer &4 ( BEF_CUSTOMIZING 139 )
The metadata entry you specified does not exist ( BEF_CUSTOMIZING 302 )
The metadata entry you specified already exists ( BEF_CUSTOMIZING 303 )
The entry in question is flagged for deletion - you cannot change it ( BEF_CUSTOMIZING 304 )
The entry in question has been changed - save it before you delete it ( BEF_CUSTOMIZING 305 )
Specify a reference field for currency/quantity field "&1" ( BEF_CUSTOMIZING 312 )
Ref. field &1 must have domain CUKY (currencies) or UNIT (quantities) ( BEF_CUSTOMIZING 313 )
Do not specify a reference field for data element &1 ( BEF_CUSTOMIZING 314 )
Usage &1 has already been defined for container &2 ( BEF_CUSTOMIZING 317 )
Object "&1" has already been defined as a predecing object ( BEF_CUSTOMIZING 319 )
Only one element can be assigned to usage &1 ( BEF_CUSTOMIZING 322 )
Entry is in a different namespace (action terminated) ( BEF_CUSTOMIZING 323 )
The entry you selected belongs to a protected SAP application ( BEF_CUSTOMIZING 324 )
No fields for display in selection group &1 ( BEF_CUSTOMIZING 325 )
There are still dependent metadata entries (entry cannot be deleted) ( BEF_CUSTOMIZING 326 )
Selection group &1 has no elements for application &2 / object &3 ( BEF_CUSTOMIZING 329 )
The key &1 for identifying a service already exists. ( BEF_CUSTOMIZING 330 )
Execution sequence &1 can be found in the customer name space ( BEF_CUSTOMIZING 334 )
Execution sequence &1 can be found in SAP name space ( BEF_CUSTOMIZING 335 )
Event &1 does not comply with naming conventions ( BEF_CUSTOMIZING 340 )
Only one field may be assigned to usage &1 ( BEF_CUSTOMIZING 341 )
Usage &1 is already in use as a predecessor ( BEF_CUSTOMIZING 342 )
Index group &1 already in use as a predecessor ( BEF_CUSTOMIZING 343 )
Selection group &1 already in use as a predecessor ( BEF_CUSTOMIZING 344 )
Subscription &1 already in use as a predecessor ( BEF_CUSTOMIZING 345 )
Unable to transport the metadata of application &1 ( BEF_CUSTOMIZING 350 )
Class &4 does not exist in application &1 ( BEF_CUSTOMIZING 360 )
Function group for layer &4 does not exist in application &1 ( BEF_CUSTOMIZING 361 )
The BAdI for service &3 does not exist in application &1 ( BEF_CUSTOMIZING 362 )
Report &1 does not exist in application &2 ( BEF_CUSTOMIZING 363 )
Structure type &2 is not contained in container &1 ( BEF_CUSTOMIZING 607 )
Structure &2 occurs more than once in container &1 ( BEF_CUSTOMIZING 608 )
Database structure for container &2 incorrectly defined ( BEF_CUSTOMIZING 610 )
No 'COM' structure is present in container &1 ( BEF_CUSTOMIZING 612 )
No 'WRK' structure is present in container &1 ( BEF_CUSTOMIZING 613 )
No key was entered for container &1 ( BEF_CUSTOMIZING 617 )
The primary key is not at the beginning in container &1 ( BEF_CUSTOMIZING 619 )
In container &1, an incorrect structure was flagged as a key ( BEF_CUSTOMIZING 620 )
Interlinkage of structures is inconsistent in BEFM_CONSTI ( BEF_CUSTOMIZING 623 )
Characteristics of attribute &1 are not unique ( BEF_CUSTOMIZING 625 )
Naming conventions not observed for attribute &1 ( BEF_CUSTOMIZING 627 )
In template &1, event &2 is listed several times ( BEF_CUSTOMIZING 635 )
In application &1, container &2 was assigned to more than one object ( BEF_CUSTOMIZING 638 )
DDIC structure &1 is not classified correctly ( BEF_CUSTOMIZING 640 )
A feature variable has name &1. This is not allowed ( BEF_CUSTOMIZING 643 )
Field &2 and reference field &1 have different structure types ( BEF_CUSTOMIZING 648 )
Reference field &1 for attribute &2 is not in container &3 ( BEF_CUSTOMIZING 649 )
No reference structure determined for field &1 with reference field &2 ( BEF_CUSTOMIZING 651 )
Service &1 is implemented several times in object &2 of application &3 ( BEF_CUSTOMIZING 660 )
Feature &2 does not redefine parameter &1 of service &3 ( BEF_CUSTOMIZING 661 )
Feature &2 redefines parameter &1 of service &3 incorrectly ( BEF_CUSTOMIZING 662 )
Only use variables of typing Q and S in service features ( BEF_CUSTOMIZING 663 )
Service feature &1 may not be assigned to application objects ( BEF_CUSTOMIZING 665 )
Variable &1 of feature &2 may not have typing Q or S ( BEF_CUSTOMIZING 666 )
Variable &1 of feature &2 may not have typing A ( BEF_CUSTOMIZING 667 )
Default variable &1 of feature &2 is not redefined ( BEF_CUSTOMIZING 668 )
Using an mBDoc of type &1 is not supported for application &2 ( BEF_CUSTOMIZING 700 )
Container &1: The database structure must not be a basis structure ( BEF_GENERATOR 109 )
Basic structure &1 created. Type &2: based on Feature attributes ( BEF_GENERATOR 111 )
Application object &1/&2 does not exist ( BEF_GENERATOR 112 )
Structure &2 of container &1 is empty ( BEF_GENERATOR 114 )
Field &1 was automatically entered in the structure ( BEF_GENERATOR 124 )
No function groups defined for application &1 / object &2 / service &3 ( BEF_GENERATOR 131 )
Service &3 not active for application &1 / object &2 ( BEF_GENERATOR 136 )
Container &1 does not exist ( BEF_GENERATOR 138 )
Service container &1 does not exist ( BEF_GENERATOR 139 )
Interface module &2 (for function &1) does not exist ( BEF_GENERATOR 155 )
Archive information structure &1 created but not active; no generation ( BEF_GENERATOR 157 )
Application &1 not generated correctly. No generation log available. ( BEF_GENERATOR 161 )
Lock object not supposed to be generated for container &1 ( BEF_GENERATOR 173 )
Container &1 has no attributes (i.e. no user-definable fields) ( BEF_GENERATOR 176 )
No objects defined for application &1 ( BEF_GENERATOR 177 )
&2 has been called in incorrect context: variable &1 not resolved ( BEF_GENERATOR 178 )
Container &1 has no persistent service parameters ( BEF_GENERATOR 179 )
Container &1 has no dynamic service parameters ( BEF_GENERATOR 180 )
The container structure of container &1 is not consistent ( BEF_GENERATOR 181 )
&2 has been called in incorrect context: Parameter &1 not filled ( BEF_GENERATOR 182 )
Module &3, parameter &1: value &2 not possible ( BEF_GENERATOR 183 )
Object &2 is not assigned to application &1 ( BEF_GENERATOR 186 )
No container defined for application &1 / object &2 ( BEF_GENERATOR 187 )
No structures defined for container &1 ( BEF_GENERATOR 193 )
Transaction &1 already exists - but in package &3 (and not in package &2) ( BEF_GENERATOR 195 )
No elements defined for selection group &1 (container &2) ( BEF_GENERATOR 197 )
Screen &1 (program &2) was NOT copied to screen &3 (program &4) ( BEF_GENERATOR 204 )
Usage &1 not relevant to generation process ( BEF_GENERATOR 209 )
No function group defined for applic. &1, obj. &2, service &3, layer &4 ( BEF_GENERATOR 211 )
No Business Add-Ins defined for application &1 / object &2 ( BEF_GENERATOR 213 )
Data inconsistency in metadata table &1 (program terminated) ( BEF_GENERATOR 248 )
Interface function &2 for class &1 does not exist ( BEF_GENERATOR 253 )
Interface function &3 for method &1 of class &2 does not exist ( BEF_GENERATOR 263 )
Error in object &1 &2 &3 (see activation log) ( BEF_GENERATOR 282 )
Warning for object &1 &2 &3 ( BEF_GENERATOR 283 )
Template already exists (see message long text) ( BEF_GENERATOR 404 )
Specify the system type of the current development system ( BEF_NAVIGATOR 050 )
Activation/deactivation of feature cannot be transported ( BEF_NAVIGATOR 051 )
Inherited metadata cannot be changed ( BEF_NAVIGATOR 100 )
Using an mBDoc of type &1 is not supported for application &2 ( BEM_BDOC 171 )
Structure &1 is not available as active in application &2 ( BEM_BDOC 172 )
Application &1 is in the customer namespace ( BEM_BDOC 176 )
No objects defined for application &1 ( BEM_BDOC 177 )
Application &1 is in the SAP namespace ( BEM_BDOC 178 )
Object &2 is not assigned to application &1 ( BEM_BDOC 186 )
You do not have to generate BDoc substructure &1 ( BEM_BDOC 191 )
Data inconsistency in metadata table &1 (program terminated) ( BEM_BDOC 248 )
No data in file for selected countries ( BF00 001 )
Checking rule not defined correctly for bank key ( BF00 002 )
The selected bank key is not maintained ( BF00 003 )
Version &2 does not exist for country &1 ( BF00 005 )
The file contains errors ( BF00 006 )
The entered object type &1 does not correspond to expected object type &2 ( BF00 008 )
IBAN cannot be generated ( BF00 012 )
Bank number and bank account number cannot be generated ( BF00 013 )
Bank key not found; see long text ( BF00 018 )
Bank no. from IBAN (&) is not the same as no. of bank (&); see long text ( BF00 019 )
IBAN proposed was overwritten ( BF00 024 )
The bank country and ISO code of the IBAN are not identical ( BF00 025 )
Check and confirm the proposed IBAN ( BF00 026 )
Bank key is obsolete; you can only generate the bank data ( BF00 028 )
Enter a valid CFOP code ( BF00 034 )
Bank key in table BNKA contains invalid characters ( BF00 038 )
Country must be Italy ( BF00 042 )
Country must be Spain ( BF00 043 )
Error closing file & ( BF00 044 )
Create a country with vehicle country key "D" ( BF00 045 )
BANK SORT CODE is not unique (error in file for import) ( BF00 046 )
For Austria only ( BF00 049 )
Do not enter a CNPJ in conjunction with a natural person ( BF00 051 )
Enter a CPF only in conjunction with a natural person ( BF00 052 )
Amount & is too big to be converted into words ( BF00 074 )
No entry found for argument & & & in table T015Z ( BF00 075 )
Entry & & & in table T015Z does not have a delimiter (;) ( BF00 076 )
Country & is not defined ( BF00 122 )
No deleted objects exist ( BF00 126 )
No deleted objects exist for & ( BF00 127 )
No entered objects exist ( BF00 128 )
No entered objects exist for & ( BF00 129 )
You are not authorized to display changes to banks ( BF00 154 )
Invalid character in text "&" in customer system ( BF00 194 )
Invalid character "&" in text & ( BF00 196 )
No payment history was recorded up to now ( BF00 200 )
Search was unsuccessful. ( BF00 201 )
Country & is not defined ( BF00 202 )
Bank & marked for deletion in country & ( BF00 210 )
Bank & & (internal number assignment) already exists ( BF00 216 )
Bank keys are assigned internally in country & ( BF00 217 )
IBAN without BIC cannot be activated; see long text ( BF00 218 )
Number range cannot be changed since it has not yet been created ( BF00 221 )
This IBAN can be changed in application &1 only ( BF00 224 )
You are not authorized to display bank data ( BF00 226 )
You are not authorized to change bank data ( BF00 227 )
You are not authorized to create bank data ( BF00 228 )
Create a new internal SEPA bank; see long text ( BF00 229 )
The IBAN cannot be deleted because a where-used list cannot be generated ( BF00 233 )
No country matches the selection criteria ( BF00 252 )
The bank key is not the bank number in any selected country ( BF00 253 )
Create a country with vehicle country key "D" ( BF00 254 )
Country must be Germany ( BF00 256 )
Bank number is not defined as the bank key in country & ( BF00 257 )
Bank data cannot be deleted; company code & is a production code in & ( BF00 258 )
Bank data cannot be deleted as still defined as house bank & in CoCd & ( BF00 259 )
Archiving object & is still running ( BF00 300 )
Undeleted archive files exist for & ( BF00 301 )
Blocking is not possible at present ( BF00 302 )
System error: Error inserting & ( BF00 304 )
System error: Error updating & ( BF00 305 )
SYST: POST_BANK_ADDRESS, invalid update flag passed ( BF00 306 )
System error: Table T_BNKA does not contain any entries ( BF00 307 )
System error: Error in routine & & & & ( BF00 308 )
List is incomplete because of authorization restrictions ( BF00 314 )
Error reading the first record of the file & ( BF00 315 )
File & does not contain a record end indicator ( BF00 316 )
File & presumably contains record end indicator ( BF00 317 )
File & cannot be processed ( BF00 318 )
Error closing file & ( BF00 319 )
File & cannot be opened for INPUT ( BF00 320 )
File & cannot be opened for OUTPUT ( BF00 324 )
Message number & is not allowed ( BF00 400 )
Message type & is not allowed here ( BF00 401 )
Specified CNPJis not valid ( BF00 420 )
CPF specified is not valid ( BF00 421 )
CFOP and CFOP enhancement must be entered in the correct format ( BF00 422 )
No payments were selected ( BFIBL02 151 )
No payment groups found for payment run &1 &2 ( BFIBL02 154 )
No Payment Groups for Payment Run &1 &2 Found ( BFIBL02 156 )
No Payment Media Created in Format &1 ( BFIBL02 159 )
Too many payment mediums created for this payment group ( BFIBL02 160 )
You don't have the necessary authorization to start payment medium job &1 ( BFIBL02 164 )
All payment media have already been created for this payment group ( BFIBL02 166 )
Document & either not found or reversed, payment not on payment medium ( BFIBL02 167 )
Posting of payment documents was not completed after &1 seconds ( BFIBL02 169 )
Format &1 of payment run and format &2 in Customizing are not consistent ( BFIBL02 170 )
Payment medium format &1 has no level of detail ( BFIBL02 172 )
Payment medium format &1 not assigned to a payment method ( BFIBL02 173 )
Variant &1 has already been entered and will not be transferred ( BFIBL02 187 )
You have no authorization for changing of payment medium variants ( BFIBL02 198 )
You have no authorization for payment medium variants ( BFIBL02 199 )
Payment run/group (&1) locked by user &2 ( BFIBL02 202 )
No payment media were created ( BFIBL02 203 )
Maintain the company number for house bank &1 &2 ( BFIBL02 210 )
Supplement &2 does not exist for payment medium format &1 ( BFIBL02 211 )
Format supplement &2 for format &1 is not maintained ( BFIBL02 213 )
Enter a format structure for this format ( BFIBL02 214 )
No format entered for this payment method ( BFIBL02 217 )
The instruction key &3 is not maintained ( BFIBL02 218 )
No payment medium log exists for this run ( BFIBL02 220 )
Payment media created in format &1 ( BFIBL02 222 )
Error when writing to TemSe ( BFIBL02 229 )
TemSe file could not be closed ( BFIBL02 230 )
Payment advice note created for payment document &1 ( BFIBL02 231 )
During the setup of the note to payee lines were reduced ( BFIBL02 232 )
The amount of this payment is too high ( BFIBL02 240 )
Customizing changes have no effect on payment mediums already created ( BFIBL02 253 )
Payments were left out during payment medium creation ( BFIBL02 260 )
Creation of payment medium completed ( BFIBL02 261 )
Internal error &1 in function module &2 ( BFIBL02 264 )
Error occured when creating link to HR System ( BFIBL02 265 )
Variant &1 for report RFFODTA0 is not present ( BFIBL02 273 )
Letter text in payment advice note output in language &3 instead of &2 ( BFIBL02 274 )
Letter text &1 for payment advice note not found ( BFIBL02 275 )
Payment %1 not made, payment recipient account number is missing ( BFIBL02 280 )
Bank chain contains too many sender correspondence banks ( BFIBL02 300 )
Bank chain contains too many intermediary banks ( BFIBL02 301 )
Bank chain contains too many recipient correspondence banks ( BFIBL02 302 )
Bank data is incomplete (Bank country &1, bank key &2) ( BFIBL02 303 )
Bank chain contains an invalid number of intermediary banks ( BFIBL02 304 )
Issuer details for paying company code &1 are missing ( BFIBL02 305 )
Sender bank SWIFT code of payment medium in format MT&1 is missing ( BFIBL02 306 )
Recipient bank SWIFT code of payment medium in format MT&1 is missing ( BFIBL02 307 )
Recipient bank is in prefix although this is not active ( BFIBL02 308 )
The recipient bank can either only be read or set directly ( BFIBL02 309 )
Prefix and trans. record separator entered although prefix is not active ( BFIBL02 310 )
The payer account number is missing ( BFIBL02 311 )
Alternative country key for country & is not maintained ( BFIBL02 312 )
Couldn't create reporting section for payment & ( BFIBL02 313 )
Document &3 has too many central state bank indicators ( BFIBL02 314 )
Missing state central bank indicators from document &3 ( BFIBL02 315 )
Document &3: Text for state central bank indicator &1 is too long ( BFIBL02 316 )
No reporting data created for house bank &1 &2 ( BFIBL02 317 )
Bank chain in document &1 does not completely fit in DME file ( BFIBL02 318 )
Invalid instruction word &4 in document &2 ( BFIBL02 330 )
Invalid combination of instructions in document &2 ( BFIBL02 331 )
Instruction &2 must not have any additional text ( BFIBL02 332 )
SWIFT code for bank &2 missing ( BFIBL02 333 )
Technical error when saving payment data ( BFIBL02 401 )
The system could not find the payment data key ( BFIBL02 402 )
Error '&2' with RFC call of &1 ( BFIBL02 403 )
Next lot &1 of lot &2 is not permitted for payment method &3 ( BFIBL02 404 )
Both lot &1 and &2 are permitted for payment method &3 ( BFIBL02 405 )
No check lot could be determined ( BFIBL02 406 )
Check number maintenance currently blocked by user & ( BFIBL02 407 )
Payment medium format &1 is not defined ( BFIBL02 601 )
Texts are not defined for payment medium format &1 ( BFIBL02 602 )
Payment medium formats transferred ( BFIBL02 603 )
Format parameters for payment medium format &1 are not defined ( BFIBL02 604 )
Required fields for payment medium format &1 not defined ( BFIBL02 605 )
Level of detail on payment medium format &1 is not defined ( BFIBL02 606 )
Event has not been defined for payment medium format &1 ( BFIBL02 607 )
Note to payee field for payment medium format &1 not defined ( BFIBL02 608 )
Supplement for payment medium format &1 is not defined ( BFIBL02 609 )
Text of supplement for payment medium format &1 not defined ( BFIBL02 610 )
Event &2 for payment medium format &1 not defined ( BFIBL02 611 )
No level of detail has been set for payment medium formats ( BFIBL02 614 )
Transaction & not maintained for warranty processing ( BG 000 )
Invalid warranty type & ( BG 001 )
Control for warranty category & not created ( BG 002 )
No master warranty number entered ( BG 003 )
Warranty type & not allowed ( BG 005 )
Warranty type & is initial ( BG 006 )
Warranty category ist initial for warr.type & ( BG 007 )
Activity category & not allowed ( BG 008 )
Text for warranty type & not maintained ( BG 009 )
No number range created for warranty type & ( BG 010 )
Error during number assignment: Interval not found ( BG 011 )
Error during number assignment: Object not found ( BG 012 )
External master warranty number not entered ( BG 013 )
Master warranty number & already exists ( BG 014 )
Master warranty number & locked by & ( BG 015 )
Error when locking master warranty number ( BG 016 )
Number range does not allow external number assignment ( BG 018 )
System: Error occurred during locking ( BG 025 )
Only internal numbers allowed ( BG 027 )
Master warranty & locked by & ( BG 028 )
Master warranty number & is still being saved ( BG 029 )
System error: No entry in the internal header table ( BG 030 )
System error: Temporary master warranty number is initial ( BG 031 )
System error: Temporary master warranty item number is initial ( BG 032 )
System error: Temporary master warranty counter number is initial ( BG 033 )
Internal error: No master warranty exists in the internal table ( BG 034 )
No service number or item text entered ( BG 036 )
Enter a service item first ( BG 039 )
No service item exists ( BG 040 )
Enter at least warranty counter and value ( BG 042 )
System: More than 999999 entries in field & ( BG 043 )
No unit was defined for the warranty counter ( BG 044 )
System: Internal error in function module & ( BG 045 )
Warranty counter & has no text ( BG 046 )
You may only use values with a numerical format ( BG 047 )
Maintain unit for warranty counter & ( BG 048 )
Maintain at least the warranty type and text ( BG 049 )
Internal error: The system could not assign an item number ( BG 050 )
Master warranty & does not exist ( BG 051 )
Master warranty locked --> Display ( BG 052 )
Master warranty & locked by & ( BG 053 )
Error during locking of master warranty ( BG 054 )
Master warranty is not classified ( BG 055 )
No warranty counter exists ( BG 058 )
Invalid key while processing print protocol ( BG 059 )
Check print control, return code & ( BG 060 )
No further selected records ( BG 061 )
Service number & has invalid material type & ( BG 062 )
Service number & cannot be configured (Reason: &) ( BG 063 )
Entry & or & missing for configuration control ( BG 064 )
Service number & cannot be configured ( BG 065 )
System error: Configuration could not be initialized ( BG 066 )
Service item does not contain a service number ( BG 068 )
Configuration: No link to configuration for service & ( BG 069 )
Configuration: No configuration characteristics exist for service & ( BG 070 )
Configuration: Service & may not be configured ( BG 071 )
Configuration: Error while locking service & ( BG 072 )
Configuration data to & will be lost ( BG 074 )
Configuration changes for & will be lost ( BG 075 )
System: Sort field for index table is initial ( BG 077 )
Service number & does not exist ( BG 079 )
Warranty counter & entered twice ( BG 081 )
Transaction & not yet maintained in customizing ( BG 082 )
Warranty check: Void warranty counter ( BG 092 )
Warranty counter & does not have a time dimension unit ( BG 099 )
Subsequent validation is required ( BG 110 )
Posting terminated in file & return code & number & ( BG 800 )
Posting terminated during insert BGMP ( BG 801 )
Posting terminated during update BGMP ( BG 802 )
Posting terminated during delete BGMP ( BG 803 )
Posting terminated during insert BGMZ ( BG 804 )
Posting terminated during update BGMZ ( BG 805 )
Posting terminated during delete BGMZ ( BG 806 )
Posting terminated during insert BGMK ( BG 807 )
Posting terminated during delete BGMK ( BG 808 )
Posting terminated during update BGMK ( BG 809 )
Posting terminated during insert BGMT ( BG 810 )
Posting terminated during update BGMT ( BG 811 )
Posting terminated during delete BGMT ( BG 812 )
Posting terminated during insert BGMS ( BG 813 )
Posting terminated during delete BGMS ( BG 814 )
Posting terminated during update BGMS ( BG 815 )
Posting of change document terminated: error & ( BG 820 )
Posting of word processing terminated: error & ( BG 821 )
Current throughput of a bgRFC Scheduler instance (units per hour) ( BGRFC 057 )
Average throughput of a bgRFC Scheduler instance (units per hour) ( BGRFC 058 )
Current number of parallel tasks for this bgRFC destination ( BGRFC 059 )
Error rate (%) ( BGRFC 060 )
Average data rate for this bfRFC destination (bytes per second) ( BGRFC 061 )
bgRFC needs more than two dialog WPs; only &1 WP(s) currently available ( BGRFC 066 )
Destination &1 does not support configured protocol basXML ( BGRFC 067 )
basXML conversion; error in metadata collection: &1 ( BGRFC 068 )
basXML conversion; error in conversion: &1 ( BGRFC 069 )
Instance &1: Supervisor call locked in Autoabap ( BGRFC 070 )
due to resource problems in server group &1 ( BGRFC 071 )
&1 converting basXML to classic RFC for destination &2 on server &3 ( BGRFC 080 )
Destination configured for basXML but not implemented on target system ( BGRFC 081 )
bgRFC Supervisor: Server group &1 does not exist ( BGRFC 093 )
Invalid queue &1 ( BGRFC 102 )
No destination name found ( BGRFC 105 )
Unit &1 deleted ( BGRFC 106 )
Queue &1 of destination &2 deleted ( BGRFC 113 )
Invalid unit ID ( BGRFC 116 )
More than &3 units in queue &1 of destination &2 ( BGRFC 120 )
No data for this selection ( BGRFC 121 )
Locks exist for queue &1 of destination &2 ( BGRFC 122 )
Unit &1 is being debugged ( BGRFC 124 )
Resource problem: &1 ( BGRFC 128 )
Communication error: &1 ( BGRFC 129 )
Unit display not supported for chosen node ( BGRFC 206 )
No authorization to display destination ( BGRFC 207 )
No authorization for cross-client display ( BGRFC 208 )
bgRFC Supervisor: User &1 does not have sufficient authorization ( BGRFC 311 )
Cannot check RFC server name of application server &1 ( BGRFC 315 )
Check class &1 returns the following for destination &2: &3 ( BGRFC 319 )
Cannot delete queue prefix &1 ( BGRFC 322 )
bgRFC Supervisor: Authorization check for user &1 only in client &2 ( BGRFC 327 )
Server group &1 is not defined ( BGRFC 351 )
Server &1: Number of schedulers &2 is incorrect ( BGRFC 354 )
Server &1: Number of possible connections &2 is incorrect ( BGRFC 355 )
Server &1: Idle time for scheduler &2 must be greater than 60 seconds ( BGRFC 357 )
Server &1: Invalid number of destinations &2 (see long text) ( BGRFC 358 )
Server &1: Expiration time for load balancing entries &2 is incorrect ( BGRFC 359 )
Invalid application server &1 ( BGRFC 360 )
Invalid wait time between restarts of unit (long text) ( BGRFC 362 )
Invalid wait between restart attempts for destination (see long text) ( BGRFC 363 )
Invalid processing time for destination (see long text) ( BGRFC 364 )
Destination &1 not entered ( BGRFC 365 )
Not authorized to edit destination &1 ( BGRFC 366 )
Incorrect bgRFC version for destination &1 ( BGRFC 368 )
Invalid deletion time for processed units ( BGRFC 369 )
Application server &1 is not active ( BGRFC 371 )
Logon group &1 not entered ( BGRFC 372 )
Incorrect lifetime for logging ( BGRFC 374 )
Inbound destination &1 not entered ( BGRFC 377 )
Too few dialog work processes configured on application server &1 ( BGRFC 378 )
Configure a sufficient number of dialog work processes (see long text) ( BGRFC 379 )
Cannot delete inbound destination &1; &2 units exist ( BGRFC 382 )
bgRFC Supervisor: User &1 does not exist; this user must exist ( BGRFC 384 )
bgRFC Supervisor: Could not clean up user: &1 ( BGRFC 389 )
bgRFC Inbound Destination &1: Queues with prefix &2 not empty ( BGRFC 394 )
bgRFC Inbound Destination &1: Units still exist ( BGRFC 395 )
bgRFC Inbound Destination: qRFC LUWs still exist for queue prefix &2 ( BGRFC 396 )
Scheduler runs under user &3 and client &4, not &1 and &2 ( BGRFC 400 )
Scheduler runs on a server other than &1 ( BGRFC 401 )
Cannot create connection to destination &1: &2 ( BGRFC 450 )
&1: &2 units with errors ( BGRFC 451 )
Destination &1 is locked ( BGRFC 452 )
Number of units executed in the last five minutes: &2 (&1) ( BGRFC 453 )
Number of executable units in the last five minutes: &2 (&1) ( BGRFC 454 )
Max. and average time in executable state: &2 and &3 (&1) ( BGRFC 455 )
&1 units exist with basXML to RFC protocol conversion errors ( BGRFC 456 )
Server &1: Configured inbound schedulers &2, currently available &3 ( BGRFC 458 )
Server &1: Configured outund schedulers &2, currently available &3 ( BGRFC 459 )
&1: Unexpected exception: &2 &3 &4 ( BGRFC 460 )
Destination &1 does not have enough resources for a unit size of &2 bytes ( BGRFC 461 )
Destination &1 is locked due to errors ( BGRFC 462 )
No authorization to run health checks ( BGRFC 463 )
User does not have authorization &1 for RFC destination &2 ( BGRFC 464 )
Not authorized to edit bgRFC configuration (see long text) ( BGRFC 500 )
Not authorized to display bgRFC configuration (see long text) ( BGRFC 501 )
Not authorized to edit bgRFC configuration (see long text) ( BGRFC 502 )
Not authorized to display bgRFC configuration (see long text) ( BGRFC 503 )
Not authorized to edit bgRFC configuration (see long text) ( BGRFC 504 )
Not authorized to display bgRFC configuration (see long text) ( BGRFC 505 )
Not authorized to edit bgRFC configuration (see long text) ( BGRFC 506 )
Not authorized to display bgRFC configuration (see long text) ( BGRFC 507 )
Not authorized to edit bgRFC configuration (see long text) ( BGRFC 508 )
Not authorized to display bgRFC configuration (see long text) ( BGRFC 509 )
Not authorized to edit bgRFC configuration (see long text) ( BGRFC 510 )
Not authorized to display bgRFC configuration (see long text) ( BGRFC 511 )
Not authorized to edit inbound destinations (see long text) ( BGRFC 512 )
No authorized to display inbound destinations (see long text) ( BGRFC 513 )
Not authorized to edit supervisor destination of bgRFC (see long text) ( BGRFC 514 )
No authorization to create entry in NW bgRFC configuration ( BGRFC 515 )
No authorization to create entry in NW bgRFC configuration ( BGRFC 516 )
No authorization to create entry in NW bgRFC configuration ( BGRFC 517 )
No authorization to create entry in NW bgRFC configuration ( BGRFC 518 )
No authorization to create an inbound destination ( BGRFC 519 )
No authorization to create entry in NW bgRFC configuration ( BGRFC 520 )
No authorization to edit scheduler settings for destination &1 ( BGRFC 521 )
No authorization to delete entry in bgRFC configuration ( BGRFC 522 )
No authorization to delete entry in bgRFC configuration ( BGRFC 523 )
No authorization to delete entry in bgRFC configuration ( BGRFC 524 )
No authorization to delete entry in bgRFC configuration ( BGRFC 525 )
No authorization to delete inbound bgRFC destination ( BGRFC 526 )
No authorization to delete bgRFC server configuration ( BGRFC 529 )
No authorization to change the bgRFC supervisor destination ( BGRFC 530 )
bgRFC Inbound Destination &1: Name contains invalid characters ( BGRFC 539 )
No authorization to change destination configurations ( BGRFC 540 )
bgRFC dest. config. &1: Incorrect value for application check activation ( BGRFC 541 )
bgRFC Dest. Config. &1: Incorrect value for automatic unit check &2 ( BGRFC 542 )
bgRFC Dest. Config. &1: Incorrect value for max. processing time &2 ( BGRFC 543 )
bgRFC Dest. Config. &1: Incorrect value for max. unit retries &2 ( BGRFC 544 )
bgRFC Dest. Config. &1: Incorrect value for max. dest. wait time &2 ( BGRFC 545 )
bgRFC Dest. Config. &1: Incorrect value for no. of schedulers &2. ( BGRFC 546 )
bgRFC Dest. Config. &1: Incorrect value for max. no. of connections &2 ( BGRFC 547 )
bgRFC Dest. Config. &1: Incorrect value for unit history activation &2 ( BGRFC 548 )
bgRFC Dest. Config. &1: Incorrect time between two automatic retries &2 ( BGRFC 549 )
bgRFC Dest. Config. &1: Entry is invalid and cannot be edited ( BGRFC 551 )
No authorization to display bgRFC destination configuration ( BGRFC 554 )
bgRFC Dest. Config. &1: Incorrect qRFC version ( BGRFC 556 )
bgRFC Dest. Config. &1: Destination has an incorrect type ( BGRFC 557 )
Server &1: Too few dialog WPs. &2 are required and &3 are available ( BGRFC 561 )
bgRFC Supervisor Destination not created ( BGRFC 562 )
bgRFC Dest. Config. &1: Appl. check and appl. check active wrong comb. ( BGRFC 563 )
bgRFC System Config: No display authorization ( BGRFC 564 )
bgRFC System Config: No change authorization ( BGRFC 565 )
Alternative portion &1 for contract &2 installation &3 will be ignored ( BIL 005 )
Installation role &1 not relevant for distribution for grouping type &2 ( BIL 006 )
Negative consumption for secondary installation &1 ( BIL 007 )
Distribution not possible due to zero consumption ( BIL 008 )
Error changing from rate category &1 to rate category &2 ( BIL 010 )
Installation &1 requires you to specify a higher-level installation ( BIL 012 )
Higher-level installation not permitted for installation &1 ( BIL 013 )
Installation &1 is not a suitable higher-level installation ( BIL 014 )
Installation &1 does not have a clear hierarchy level ( BIL 015 )
The hierarchy for secondary installation &1 changes on &2 ( BIL 016 )
Secondary installation &1: No billing doc. available from installation &2 ( BIL 017 )
Secondary installation &1: Billing period of higher-level inst. not valid ( BIL 018 )
Secondary installation &1: Billing period of higher-level inst. not valid ( BIL 019 )
Input operand can only be provided by the secondary installation ( BIL 020 )
Negative serial switching consumption in installation &1 ( BIL 021 )
Distribution not possible due to zero consumption ( BIL 022 )
Operand &1 from ERCHV contains overlapping values ( BIL 023 )
Device &1, register &2: Missing meter reading for transformer allocation ( BIL 024 )
Device &1, register &2 is not a reactive or active meter ( BIL 025 )
Transformer &1 and consumption in inactive period ( BIL 026 )
Device &1, register &2 without transformer allocation ( BIL 027 )
Device &1, register &2 is allocated to an inactive transformer ( BIL 028 )
Transformer device &1 has the rating &2 ( BIL 029 )
Active power loss at power transformer &1 exceeds the maximum value ( BIL 030 )
Reactive power loss at power transformer &1 exceeds the maximum value ( BIL 031 )
Incorrect interval for simulation &1 - &2 for contract &3 in BAdI &4 ( BIL 032 )
Invalid parameter allocation between &1 and &2 ( BIL 033 )
Basic charge is not determined in billing transaction &1 ( BIL 034 )
Error date is empty ( BIL 041 )
Enter an RTP interface or the category of RTP billing ( BIL 042 )
Operand category &1 not permitted for time-of-use interfaces ( BIL 043 )
You cannot delete all currencies ( BIL 061 )
Joint invoicing not possible; final billing already done for contract &1 ( BIL 067 )
Profile value (profile &1, date &2, time &3) does not have valid status ( BIL 080 )
Meter reading document &1 date &2 is not suitable for reference doc. &3 ( BIL 100 )
Inconsistent quantity determination procedure in MR document &1 date &2 ( BIL 101 )
Quantity determ.procedure &1 is not admissible for dynamic period control ( BIL 104 )
Quantity determination proced.&1 is not admissible for demand registers ( BIL 105 )
Dynam.period control not admissible for quantity determination proc.&1 ( BIL 106 )
Conversion to an interim dimension not possible with QD procedure &1 ( BIL 107 )
Gas factor &1 cannot be defined uniquely ( BIL 108 )
Enter a rate type that has the same rounding type ( BIL 109 )
Specify a schema with a conditional billing program ( BIL 110 )
Schema &1 is used in rate category &2 with a conditional billing program ( BIL 111 )
Schema &1 is not admissible for conditional billing programs ( BIL 112 )
Fact group &1 is not used in schema &2 ( BIL 113 )
Rate &1 is not used in schema &2 ( BIL 114 )
Rate &1 does not have fact group &2 from the rate relationship group &3 ( BIL 115 )
Cond.billing program &1 is assigned to condit.rate with fact group &2 ( BIL 119 )
The combination of basic rate &1 and fact group &2 already exists ( BIL 120 )
Rate determination for rate relationship group &1 is incomplete ( BIL 124 )
Various conditional billing programs reference one TOU exception prog.&1 ( BIL 125 )
Rate &1 and &2 are both assigned to TOU exception program &3 ( BIL 126 )
TOU exception prog. &1 triggers same rate via billing programs &2 and &3 ( BIL 127 )
TOU excpt.prog.&1 triggers rates &2 and &3 that substitute the basic rate ( BIL 128 )
Condit.bill.program &1 is assigned to condit.rates, deletion not allowed ( BIL 129 )
Rate &1 used in rate rel.group &2 and &3 (same fact group) ( BIL 130 )
No TOU interface assigned to rate &1 fact group &2 ( BIL 131 )
TOU interface &1 in rate &2 is not admissible for the conditional rate ( BIL 132 )
TOU exception response for TOU exception &1 is not consistent ( BIL 134 )
A TOU exception response is missing for TOU exception &1 ( BIL 135 )
Conditional billing not possible if the switch is activated ( BIL 138 )
TOU exception &1 exceeds the billing period ( BIL 139 )
Proration dates exist for conditional rate that cannot be split ( BIL 140 )
Exception can be split differently in TOU exception program &1 and &2 ( BIL 141 )
TOU exceptions for rate &1 have overlapping time periods ( BIL 143 )
TOU exceptions with overlapping time periods for TOU exception program &1 ( BIL 144 )
Assign TOU exception programs to the conditional billing programs ( BIL 145 )
A schema extension is available for schema &1 ( BIL 146 )
Rate &1 is used in the schema enhancement ( BIL 147 )
Schema extension for schema &1 is incomplete ( BIL 148 )
Schema extension for schema &1 is incomplete ( BIL 149 )
TOU exception not found in validity period for a rate category ( BIL 152 )
Different interval lengths in TOU interfaces for rate &1 and &2 ( BIL 153 )
TOU exception program &1 is not executed for contract &2 ( BIL 159 )
TOU exception is found in a billed period for contract &1 ( BIL 160 )
Time zone for TOU exception program &1 is not suitable for contract &2 ( BIL 161 )
Schema &1 was created. Add the schema extension ( BIL 162 )
A schema extension already exists for schema &1 ( BIL 163 )
Rate &1 is not admissible for interval meters ( BIL 164 )
To copy the schema extension, select 'Execute Cond.Bll.Prg' ( BIL 165 )
Inconsistent rate relationship: Rate relationship group &1 does not exist ( BIL 166 )
Basic rate &1 is not admissible (interval meter, device, facts) ( BIL 167 )
Conditional rate &1 is not admissible (interval meter, device, facts) ( BIL 168 )
Basic rate &1 and conditional rate &2 have different RTP categories ( BIL 169 )
No TOU interface assigned to basic rate &1 ( BIL 170 )
No TOU interface assigned to conditional rate &1 ( BIL 171 )
Billing schema extension for schema &1 is empty ( BIL 172 )
Rate relationship grp &1 (schema &2) does not have any conditional rates ( BIL 173 )
Conditional rate &1 (ref. size &2, schema &3) without cond. billing prog. ( BIL 174 )
Cond.rate &1 w. bllng prog.&2 (ref.size &3, schema &4) w/o TOU exptn prg. ( BIL 175 )
Conditional billing program &1 (schema &2) is not allocated to a rate ( BIL 176 )
Cond. billing prog. &1 (schema &2) does not apply; assignments missing ( BIL 177 )
More than &1 schemas match the selection criteria ( BIL 179 )
TOU exceptions for rate &1 have overlapping time periods ( BIL 182 )
No data exch.task (PoD &3) for MR doc &2 (MR reas. &4)(outsorting chk &1) ( BIL 190 )
Document number &1: Error in BAdI ISU_BI_REVERSAL_UPDATE ( BIL 192 )
Document &1: Update error in BAdI ISU_BI_REVERSAL_UPDATE ( BIL 193 )
Error in method UPDATE_PREPARE in the BAdI ISU_BI_UPDATE ( BIL 194 )
Error during tax determination for old line items to be reversed ( BIL 221 )
You are not authorized to import prices ( BIL 301 )
You cannot move the start date ( BIL 315 )
You cannot move the start date; the history is limited ( BIL 316 )
Choose a shorter period ( BIL 323 )
CRM fixed prices cannot be changed ( BIL 327 )
CRM fixed price &1 has the validity period &2 to &3 ( BIL 328 )
Price does not meet the conditions for a CRM fixed price ( BIL 329 )
Parameter name for attribute &1 not found ( BIL 331 )
Colocation group not specified in &1 &2 ( BIL 333 )
Business function &1 is not activated for this process ( BILL_ACC_IF 001 )
You must start from the right and work left when you make generic entries ( BILL_ACC_IF 002 )
No document type defined for billing type &1 ( BILL_ACC_IF 003 )
No FI-CA document type is define for document type &1 ( BILL_ACC_IF 006 )
No main/sub-transaction is defined in FI-CA for document type &1 ( BILL_ACC_IF 007 )
No accounting document type is defined for rebate document type &1 ( BILL_ACC_IF 008 )
Payment cards: authorized amount exceeded ( BILL_ACC_IF 102 )
Unable to determine revenue account for billing document &1-&2: key &3 ( BILL_ACC_IF 105 )
No default tax codes defined for country &1 ( BILL_ACC_IF 106 )
No tax transaction key exists for billing document &1 - &2 ( BILL_ACC_IF 108 )
Account assignment group & does not exist ( BILL_ACC_IF 201 )
Error while instantiating BAdI & ( BIZC 003 )
Specify an XSLT transformation when calling function & ( BIZC 019 )
Remote connections to Solution Manager are not supported ( BIZC_FW_REMOTE 002 )
Standard WBS & already exists. ( BJ 010 )
Standard WBS & does not exist. ( BJ 011 )
Project & is allocated to standard WBS &. ( BJ 016 )
Project & is not allocated to a standard WBS. ( BJ 017 )
Another standard WBS is used for this material ( BJ 018 )
Standard WBS element & does not exist. ( BJ 021 )
Standard WBS & has not been released. ( BJ 680 )
Standard WBS & has already been closed. ( BJ 681 )
System error in program & (&) ( BJ 895 )
Controlling area & does not exist ( BK 001 )
Cost center & is not created for & ( BK 002 )
Document is posted under number & ( BK 003 )
Fiscal year variant & is not allowed ( BK 004 )
Cost element & is not allowed for repostings ( BK 005 )
Cost element & is not created for & ( BK 006 )
Record quantities in combination &/&. ( BK 007 )
Posting of & to & & is not allowed ( BK 008 )
Select at least one sender. ( BK 009 )
Insertion is not possible (clipboard is empty) ( BK 010 )
Enter the item data completely. ( BK 011 )
Enter & ( BK 012 )
Enter your data for the new item. ( BK 013 )
No place holders are possible within item 1 ( BK 014 )
Sender and receiver are identical; change one or the other ( BK 015 )
No update possible; enter values. ( BK 016 )
Setting & is not possible ( BK 017 )
Reduce the activity quantity entered. ( BK 018 )
Reduce the amount entered. ( BK 019 )
Function & is not possible (maximum number of items = &) ( BK 020 )
& is not possible; position the cursor clearly. ( BK 021 )
Select the end of the block ( BK 022 )
No documents exist for the data specified ( BK 023 )
Insertion terminated for item & (maximum number of items = &) ( BK 024 )
Enter a quantity with the unit of measure. ( BK 025 )
Stat. key figure & does not exist in controlling area & ( BK 026 )
The document numbered & does not exist ( BK 027 )
Only & & were entered ( BK 028 )
Order & does not exist ( BK 029 )
Currency & cannot be translated to & for exchange rate type & ( BK 030 )
Enter & ( BK 031 )
& is not allowed between objects of different company codes. ( BK 032 )
Cost centers and orders are not active in & ( BK 033 )
Controlling area & is not allowed for & ( BK 034 )
& is set with contents & ( BK 035 )
Setting & is not possible (field contents are empty) ( BK 036 )
& with content & is reset again ( BK 037 )
Select at least one receiver. ( BK 038 )
Select at least one sender and one receiver. ( BK 039 )
The original document has already been reversed by & ( BK 040 )
Activity type & is not created for & ( BK 041 )
Unit of measure & cannot be converted to & ( BK 042 )
& item(s) & ( BK 043 )
Only one field can be pre-allocated ( BK 044 )
Number already assigned; select another number. ( BK 045 )
Transaction & is not allowed in order & ( BK 046 )
Order & is not assigned to controlling area & ( BK 047 )
Enter & ( BK 048 )
An internal error occurred during block command ( BK 049 )
This document has already been reversed ( BK 050 )
This document is a reverse document ( BK 051 )
For version &, no period is defined for the & ( BK 052 )
Enter a true object only ( BK 053 )
For primary repostings, no revenues are allowed ( BK 054 )
No primary costs are allowed for revenue repostings ( BK 055 )
Orders are not allowed as senders of activities ( BK 056 )
No activity prices exist for &/& ( BK 057 )
One object should be real for double-account assignments ( BK 058 )
The object is statistical. Enter a true object ( BK 059 )
Activity type & cannot be allocated from cost center & ( BK 060 )
You cannot use external numbering for transaction & ( BK 061 )
Assign a number range to business transaction &. ( BK 062 )
The number entered is not in the external number range ( BK 063 )
The reference document was not generated by this transaction ( BK 064 )
The last internal number was assigned for this transaction ( BK 065 )
The internal number is in the critical area for this transaction ( BK 066 )
Activity type & can only be allocated indirectly for & ( BK 067 )
Type & of cost center & is not allowed for activity type & ( BK 068 )
Item(s) with fixed values are ignored at posting ( BK 069 )
You cannot have internal numbering for transaction & ( BK 070 )
Cost center accounting and activity-based costing are not active for & ( BK 071 )
Activity type & is not a non-allocatable activity type ( BK 072 )
Enter only one cost accounting object for each item ( BK 073 )
Function "&" not possible (max. items = &) ( BK 074 )
You cannot move to item &. (maximum number of items = &) ( BK 075 )
Maintain version & for fiscal year &. ( BK 076 )
It is not possible to turn to the next item (max. no. of items = &) ( BK 077 )
Sort is not possible; position the cursor clearly. ( BK 078 )
Reduce the activity quantity entered. ( BK 079 )
Cost object & is not assigned to the controlling area & ( BK 080 )
Project/WBS element & is not assigned to the CO area & ( BK 081 )
This sender/receiver combination is not allowed ( BK 082 )
Assignment objects are not active for & in controlling area & ( BK 083 )
Reduce the quantity entered. ( BK 084 )
Reduce the given output. ( BK 085 )
Enter only one statistical object. ( BK 086 )
Position the cursor on the entry you wish to select. ( BK 087 )
You cannot move to item &. (maximum number of items = &) ( BK 088 )
Select the items before executing the function. ( BK 089 )
Variant & from document & is invalid; processing on detail screen. ( BK 090 )
Object & cannot be a sender of activity ( BK 091 )
Only & item(s) have been entered ( BK 092 )
Business process & is not assigned to controlling area & ( BK 093 )
Transaction currency & has been transferred from controlling area & ( BK 094 )
You cannot run the & function for the field you selected. ( BK 095 )
You cannot select the transaction currency. It is adopted automatically. ( BK 096 )
The document date is in the future; check the date. ( BK 097 )
Th document date and posting date are in different fiscal years ( BK 098 )
The posting date is in the future; check the date. ( BK 099 )
Revenue reposting from & & to cost center is not allowed ( BK 100 )
Revenue reposting from cost center to & & is not allowed ( BK 101 )
Reduce the quantity entered. ( BK 102 )
Reduce the consumption given in item &. ( BK 103 )
Posting made to cost center & of the statistical order ( BK 104 )
Assignment to project/network is not permitted for order & ( BK 105 )
Network & is not assigned to controlling area & ( BK 106 )
Sales order & is not assigned to controlling area & ( BK 107 )
No object number could be determined for & & ( BK 108 )
Enter a network number ( BK 109 )
Enter a sales order number. ( BK 110 )
Edit item & ( BK 111 )
Select at least one line item. ( BK 112 )
Posting date is not within fiscal year & ( BK 113 )
The amount entered is larger than the amount to be reposted ( BK 114 )
The quantity entered is larger than the quantity to be reposted ( BK 115 )
Reference item & is not fully reposted ( BK 116 )
Amount from reference item & has already been fully reposted ( BK 117 )
No CO document exists for accounting document & ( BK 118 )
Enter a cost center for activity type &. ( BK 119 )
Enter material, plant, and production version ( BK 120 )
Run schedule & is not assigned to controlling area & ( BK 121 )
Run schedule & has not been created ( BK 122 )
No run schedule exists for material &/version & on & ( BK 123 )
System cannot determine run schedule for material &/version & on & ( BK 124 )
Posting date is not within validity period of run schedule & ( BK 125 )
Run schedule & is not created for material &/production version & ( BK 126 )
Activity type & cannot be indirectly allocated ( BK 127 )
Activity type & is not allowed for business transaction & ( BK 128 )
Reposting is not permitted for accounting doc. & from company code & ( BK 129 )
Document & does not exist in company code & ( BK 130 )
Document & & does not exist in fiscal year & ( BK 131 )
& belong to different company codes ( BK 132 )
& belong to different business areas ( BK 133 )
& have different profit centers ( BK 134 )
& & is not assigned to a business area ( BK 135 )
System variant & was set ( BK 136 )
Screen variant & was transferred from document & ( BK 137 )
Document & was created with system variant & (detailed screen) ( BK 138 )
Screen variant & is not valid ( BK 139 )
Document & is being processed by user & ( BK 140 )
& & is not assigned to any company code ( BK 141 )
No production cost collector created for serial order & ( BK 142 )
Cost center &/activ. type & is not yet planned in version &/& ( BK 143 )
Cost center &/activ. type & being edited by user & ( BK 144 )
Transaction currency & was determined automatically by the system ( BK 145 )
Maintain the exchange rate type for version & in &. ( BK 154 )
Revenue posting to/from cost center: Reconciliation object update. ( BK 155 )
Enter non-statistical, revenue-carrying objects. ( BK 156 )
Business transaction & for document & is not supported here ( BK 157 )
Enter only one receiver per object type. ( BK 161 )
Selection w/o restrictions for document numbers or acct assign. objects ( BK 165 )
Document &1 has already been reposted through document &2. ( BK 169 )
A document is always completely reversed. ( BK 171 )
Period entry is ignored by the system ( BK 174 )
No true sender object entered ( BK 175 )
No true receiver object entered ( BK 176 )
No documents have been reposted or reversed so far. ( BK 180 )
Select at least one line item. ( BK 181 )
Flag documents for reversal first. ( BK 184 )
Document with external ref. cannot be reversed through internal number. ( BK 185 )
Transfer prices are active. Use reposting for line items. ( BK 187 )
Document incomplete; transaction cannot be executed. ( BK 188 )
You can select only single values and intervals for field &1 ( BK 189 )
Only individual values may be selected for the & field ( BK 190 )
The external number is not unique, enter an internal number ( BK 191 )
The external number is not unique, enter an internal number ( BK 192 )
No line items have been changed. Posting is not possible ( BK 194 )
Document has an external original system; transaction cannot be processed ( BK 195 )
Document to be reversed has a reference to another document. ( BK 196 )
Reference document & is not suitable for the current transaction ( BK 199 )
This row is already reserved for line item settlement ( BK 200 )
Internal error: Use a different reference document ( BK 201 )
Reposting not possible, as all possible periods are locked ( BK 203 )
Reposting not poss. due to summarization using aux. account assignments ( BK 206 )
Amount must be splitted before quantity can be reduced ( BK 207 )
Posting row & of document & cannot be reposted ( BK 208 )
Accounting indicator entered without order ( BK 209 )
Accounting indicator may only be entered with a service order ( BK 210 )
No cost-accounting-relevant account assignment - reposting not possible ( BK 212 )
Processing not possible as posting exists on CCtr/activity type ( BK 213 )
Reposting period is earlier than the original posting period ( BK 214 )
Allocation of revenues on cost centers is not possible ( BK 215 )
CO document &1 has already been reposted through document &2 ( BK 216 )
Enter an object type first ( BK 217 )
You can only select accounting document fields during entry ( BK 220 )
Object type & cannot be used here ( BK 222 )
Transfer prices are active; Use automatic allocation ( BK 223 )
Inconsistent planning: Price in object curcy 0; in CO area curcy <> 0 ( BK 225 )
Multiple posting of same key figure (type 1) to one object is redundant ( BK 226 )
This row is already reserved for line item billing ( BK 229 )
Values are only kept in controlling area currency &1 ( BK 230 )
If necessary, check the document header for document &1 ( BK 231 )
Document & was partially reversed ( BK 232 )
Document &2 is too big; The system is only reposting the first &1 row(s) ( BK 233 )
The document was only partially archived; &1 ( BK 234 )
The document's original system is external; &1 ( BK 235 )
The new posting date is older than the old posting date ( BK 237 )
Selection by FI document without document numbers ( BK 238 )
Row &1 in document &2 can only be reposted in fiscal year &3 ( BK 239 )
&1 allocates inconsistent quantity ( BK 240 )
Document &1, row &2 cannot be reposted ( BK 241 )
This row is already reserved for line item settlement ( BK 242 )
Reposting for cost element &1 not possible ( BK 243 )
Not possible to reverse actual costs: No doc. for confirmation &1/&2 ( BK 244 )
Valuation period &1 is not valid ( BK 246 )
Error while converting to internal data structures ( BK 247 )
Reduce the quantity also ( BK 249 )
Company code &1 does not belong to controlling area &2 ( BK 250 )
The total of the subquantities is greater than the quantity for reposting ( BK 252 )
Profitability segment cannot be changed by reposting ( BK 255 )
Statistical cost elements cannot be reposted ( BK 256 )
Item & of document & cannot be reposted ( BK 262 )
Document number & is already in use. ( BK 402 )
No activity prices are planned for process &. ( BK 501 )
Business process & does not support sender activity entry. ( BK 502 )
Business process & has no non-allocable performance types. ( BK 503 )
Business process & has no indirectly allocable performance types. ( BK 504 )
Business process & is not yet planned in version &/&. ( BK 505 )
Business process & is being processed by user &. ( BK 506 )
Business process & has no directly allocable performance types. ( BK 507 )
The document is not consistent and cannot be posted ( BK 508 )
The table transferred with lines of data contains no entries ( BK 601 )
Error while reading table & ( BK 602 )
Online parameters can only have the values Space, A, E, or N ( BK 603 )
Currency key specified ignored because only one currency in CO ( BK 605 )
Errors occurred when converting the entries & & & & ( BK 651 )
Entry K-BELEG & & already exists. & inserted later ( BK 652 )
Entry K-BELEG & 999 already exists, & not inserted ( BK 653 )
Conversion of table TRWPR completed. ( BK 654 )
Task: CO client &: Table: TRWPR ( BK 655 )
The transaction is obsolete (see SAP Note 441872) ( BK 750 )
The number range was not found ( BK 801 )
The number range is not external ( BK 802 )
The number range object was not found ( BK 803 )
The number range is not internal ( BK 804 )
You can no longer assign another internal number ( BK 805 )
System error: Termination when updating act. primary data ( BK 807 )
System error: Termination when updating line-item index ( BK 809 )
System error: Termination when reading the reversal document header ( BK 810 )
System error: Termination when writing reverse document header ( BK 811 )
System error: Parameter initialization has failed ( BK 813 )
System error: Company code & is not in Table 001 ( BK 814 )
System error: Error when inserting CCtr/activity type master records ( BK 815 )
System error: No cost object for cost collector &/& ( BK 816 )
System error: No line items exist for document & ( BK 817 )
System error: No cost center in credit during cost allocation ( BK 818 )
System error: No line items exist for document & ( BK 819 )
System error: No line items exist for document & ( BK 820 )
System error: No posting rows in document &/& despite document header. ( BK 821 )
Only line items containing key ratios of type 1 (fixed value) exist ( BK 822 )
System error: Cost center missing in document &, item & ( BK 823 )
Statistical object not same as order or CCtr in document item & ( BK 824 )
Convert the old repostings first ( BK 825 )
Revenues on cost centers are not permitted ( BK 826 )
System error: Entry does not exist for material/plant &/& in file & ( BK 827 )
System error: Missing line items from file & for item &, docum. & ( BK 828 )
The document has too many line items (maximum number = &) ( BK 829 )
System error: Reposting document for document &1 is inconsistent ( BK 832 )
Domain & not found ( BKKBENCH 003 )
Bank area &2, Acct &1: Clos. proc. terminated; remove the &3 lock ( BKK_CLS 003 )
Bank area &2, Acct &1: Cls. proc. termtd; term agrmt has &3 status ( BKK_CLS 004 )
Bank area &2, Acct &1: Balncng will fail; unreleased ovrdrft limits exist ( BKK_CLS 006 )
Bank area &2, Acct &1: Unreleased conditions exist; clos. proc. termtd ( BKK_CLS 007 )
Bank area &2, Acct &1: Term agreement with Created status exists ( BKK_CLS 009 )
Bank area &2, Acct &1: Closure process terminated since IVA exists ( BKK_CLS 013 )
Bank area &2, Acct &1: Closure process terminated since RBD acct exists ( BKK_CLS 014 )
Bank area &2, Acct &1: Is a root acct; closure process terminated ( BKK_CLS 015 )
Bank area &2, Acct &1: Is part of an acct hierarchy; clos. proc. termntd ( BKK_CLS 017 )
Bank area &2, Acct &1: Has payt items in postprocessing; cls proc termntd ( BKK_CLS 019 )
Bank area &2, Acct &1: Has payt items with value dte after closure dte ( BKK_CLS 020 )
Bank area &2, Acct &1: Has payt items in release proc.; cls. proc. termtd ( BKK_CLS 021 )
Bank area &2, Acct &1: Clos. proc. terminated since planned items exist ( BKK_CLS 022 )
Bank area &2, Acct &1: Has payt orders in postprocessing; cls proc termtd ( BKK_CLS 023 )
Bank area &2, Acct &1: Has payt orders in dual control; cls. proc. termtd ( BKK_CLS 024 )
Bank area &2, Acct &1: Closure process terminated since fwd orders exist ( BKK_CLS 025 )
Validity of BP &2 in BP role &1 was set to &3 ( BKK_CLS 047 )
Bank area &2, Acct &1: Account locked by user &3 ( BKK_CLS 048 )
Define dependent object behavior for bank area &1 ( BKK_CLS 052 )
Define the account closure balancing date for bank area &1 ( BKK_CLS 053 )
Bank area &2, Acct &1: Limits will be updated ( BKK_CLS 056 )
Bank area &2, Acct &1: Planned closure date is in the future ( BKK_CLS 058 )
Bank area &2, Acct &1: Acct is locked by EOD process; cls. proc. termntd ( BKK_CLS 060 )
Bank area &2, Acct &1: Error in account balancing; see long text ( BKK_CLS 061 )
Bank area &2, Acct &1: Account balancing successful; see long text ( BKK_CLS 062 )
Specify when acct closure prenotification correspondence must be genrtd ( BKK_CLS 067 )
Bank area &2, Acct &1: Cls. proc. failed; acct sts enhancement chg. to &3 ( BKK_CLS 069 )
Enter a valid Closure Reason ( BKK_CLS 072 )
Enter a valid number of prenotification days ( BKK_CLS 079 )
Bank area &2, Acct &1: Cls. proc. terminated; payment items SFP exist ( BKK_CLS 088 )
Bank area &2, Acct &1: Cls proc termntd; Acct holder &3 blocked centrally ( BKK_CLS 090 )
Bank area &2, Acct &1: Limits will be deleted ( BKK_CLS 098 )
Enter account holder as correspondence recipient for account &1 ( BKK_CLS 106 )
Bank area &2, Acct &1: Is reference acct for acct &4 in bank area &3 ( BKK_CLS 123 )
Bank area &2, Acct &1: Closure process terminated; locking reasons exist ( BKK_CLS 125 )
Bank Area &1: No accts selected for acct closure prenotif. correspondence ( BKK_CLS 133 )
Bank area &2, Acct &1: Unrel conditions exist; clos. proc. will be termtd ( BKK_CLS 142 )
You can run report only if business function EAFS_BCA_BUSOPR is activated ( BKK_CLS 147 )
Bank area &2, acct &1: Balancing will fail; data in release exist ( BKK_CLS 156 )
Valid-To date of prenote is not valid ( BKK_PRENOTE 003 )
Prenote with reference number &1 cannot be edited ( BKK_PRENOTE 007 )
Limit check failed for prenote due to locked account balance ( BKK_PRENOTE 011 )
Prenote with reference number &1 cannot be deleted ( BKK_PRENOTE 012 )
No active prenote &1 in bank area &2, account &3 ( BKK_PRENOTE 015 )
Currency &1 of prenote &2 does not match account currency &3 ( BKK_PRENOTE 022 )
Amount &1 of prenote &2 does not match payment item amount &3 ( BKK_PRENOTE 028 )
Prenote &1 cannot be edited since the validity has expired ( BKK_PRENOTE 046 )
Enter a prenote reference number ( BKK_PRENOTE 051 )
Locks exists on account for certain Transactions ( BKK_PRENOTE 054 )
Medium &1 is locked for certian transaction types ( BKK_PRENOTE 055 )
Error while locking the prenote &1, account &2, bank area &3 ( BKK_PRENOTE 106 )
Prenote feature is inactive in the product or it is locked in the account ( BKK_PRENOTE 119 )
Internal number of prenote not generated; Number range overflow ( BKK_PRENOTE 201 )
Locking failed for prenote reference number &1 ( BKK_PRENOTE 202 )
Error occurred; Release not allowed ( BKK_PRENOTE 506 )
Row &1 is removed from the reference due to insufficient authorization ( BKN 001 )
No authorization for row &1: The reversal is not possible ( BKN 002 )
No authorization for screen variants ( BKN 003 )
Deletion is not possible because you have not chosen a row ( BKN 005 )
Copying is not possible because you have not selected a row. ( BKN 006 )
Data cannot be held - current row contains no data ( BKN 007 )
No data held. Holding of data cannot therefore be finished ( BKN 008 )
You have not specified a reference document - copying not possible ( BKN 009 )
Enter valid selection criterion ( BKN 011 )
Value &1 not intended for selection criteria &2 ( BKN 012 )
Select a suitable column that contains values ( BKN 509 )
Select a suitable column ( BKN 510 )
Profitability segments can only be entered under single entry ( BKN 511 )
To delete the line, delete all input fields ( BKN 514 )
Also select cost center as receiver ( BKN 517 )
Specify the object first (not generically) ( BL 002 )
No log was created for object & ( BL 007 )
No log created for object & and subobject & ( BL 008 )
Object & is not defined ( BL 010 )
Subobject &2 not defined for object &1 ( BL 011 )
Specify a subobject for object & ( BL 012 )
No header created yet for the specified object/subobject ( BL 013 )
No text or user exit specified for the object/subobject ( BL 014 )
Reorganize number range for application log ( BL 015 )
The last log number has been allocated ( BL 016 )
No log was found for these selection criteria ( BL 018 )
& log(s) deleted ( BL 019 )
None of the marked logs could be deleted ( BL 020 )
Only & log(s) could be deleted ( BL 021 )
The log was deleted ( BL 022 )
No text or user exit was specified for the specified message ( BL 023 )
Select entries for deletion ( BL 032 )
The expiration date of this log can only be increased ( BL 033 )
You do not have authorization to display all specified logs ( BL 034 )
No messages were found for the specified view ( BL 035 )
You are not authorized to display the specified log ( BL 037 )
You are not authorized to delete the specified log ( BL 038 )
You do not have authorization to archive the required logs ( BL 039 )
Number range interval not defined for application log ( BL 040 )
The application log number range interval is not internal ( BL 041 )
The application log number range object does not exist ( BL 042 )
The documentation module &1 could not be found ( BL 046 )
The standard text output type must be specified ( BL 047 )
Text module (long text) &1 conversion unsuccessful. ( BL 048 )
&1 application log(s) not deleted ( BL 051 )
Job step definition error ( BL 059 )
The created job could not be selected. ( BL 063 )
Job &1 could not be deleted after a definition error. ( BL 065 )
Message could not be formatted (too complex). ( BL 100 )
Message &1 is not defined in language &3 and work area &2. ( BL 101 )
The parameter &1 has an invalid length. ( BL 102 )
Log currently locked by user &1. ( BL 200 )
Log cannot be saved: Object/subobject not specified ( BL 201 )
The DDIC structure &1 does not exist or has errors ( BL 202 )
Message incomplete (severity, area, number, or exception missing) ( BL 203 )
Context inconsistent (see long text) ( BL 204 )
Parameters inconsistent (see long text) ( BL 205 )
Inconsistent context-dependent statistics definition ( BL 217 )
Only the first & deletable logs are displayed ( BL 227 )
Number of deletable logs: &1 (&2 % of &3 logs in all clients) ( BL 230 )
Disp. prof.: Field catalog level &1: No table/field name (see long text) ( BL 233 )
Disp. prof.: Field catalog messages: No table/field name (see long text) ( BL 234 )
Display profile: Field catalog level &1: No structure &2 (see long text) ( BL 235 )
Display profile: Field catalog messages: No structure &1 (see long text) ( BL 236 )
Display profile: Field catalog level &1: No field &2-&3 (see long text) ( BL 237 )
Display profile: Field catalog messages: No field &1-&2 (see long text) ( BL 238 )
Display profile: Field catalog level &1: Internal error (see long text) ( BL 239 )
Display profile: Sort order level &1 is inconsistent (see long text) ( BL 240 )
Display profile: Inconsistent message sort order (see long text) ( BL 241 )
Display profile: Message field catalog is empty (see long text) ( BL 242 )
Display profile: Message field catalog: Internal error (see long text) ( BL 243 )
Display profile: Field catalog level &1: Duplicate table/field name ( BL 248 )
Display profile: Field catalog messages: Duplicate table/field name ( BL 249 )
Message number 999999 reached. Log is full ( BL 252 )
Display profile: Field catalog level &1: Field &2-&3: Wrong position ( BL 255 )
Log is not complete ( BL 256 )
Not all logs from the archive could be displayed ( BL 259 )
&1 log(s) are being edited and are not displayed ( BL 263 )
Cannot lock log &1 (deadlock) ( BL 264 )
Delete in the background ( BL 267 )
&1 logs deleted in &2 background jobs ( BL 268 )
Maximum weight exceeded ( BL 301 )
The flight is overbooked ( BL 302 )
Aircraft &1 is not available at this time ( BL 303 )
Payment by passenger &1 has not yet been checked ( BL 304 )
Flight permission has not yet been granted ( BL 305 )
Crew breaks cannot be kept ( BL 309 )
Incomplete address data for customer &1 in document &2 ( BL 321 )
Invoice &1 incomplete. Bank a/c details missing ( BL 322 )
New price: Special offer in document &1 is no longer valid ( BL 323 )
The options list for a selected purchasing document type cannot be empty ( BLGL 002 )
System error in instance for BAdI method &1, return code &2 ( BLGL 011 )
In table &, entry & & & is missing ( BM 001 )
Error when adding a data record: & & & & ( BM 002 )
Error when changing a data record: & & & & ( BM 003 )
Error when deleting a data record: & & & & ( BM 004 )
Entry cannot be deleted while in use ( BM 005 )
Entry cannot be deleted while in use ( BM 006 )
Overlap with dimension & is not permitted ( BM 008 )
Commercial unit & already exists ( BM 009 )
Technical unit & already exists ( BM 010 )
Language-dependent keys were amended ( BM 011 )
Mark primary unit for ISO code only once ( BM 012 )
ISO code & belongs to another dimension ( BM 013 )
Unit & is not defined ( BM 014 )
Unit & does not correspond to dimension & ( BM 015 )
SI units must have specific conversion factors ( BM 016 )
Unable to display possible entries ( BM 017 )
Specify at least 1 unit ( BM 018 )
Use a number field for field & ( BM 019 )
Place the cursor on a valid line ( BM 020 )
You have deleted & unit(s) ( BM 021 )
First mark the units to be deleted ( BM 022 )
Dimension & does not exist ( BM 023 )
You have deleted unit of measure & ( BM 024 )
Unit of measure & already exists ( BM 025 )
This unit is not defined ( BM 027 )
Division by zero caught ( BM 029 )
This is the last entry ( BM 030 )
This is the first entry ( BM 031 )
Enter a valid number of decimal places ( BM 033 )
No measurement unit is assigned to ISO code & ( BM 034 )
Measurement unit & has no ISO code ( BM 035 )
The number cannot be split into a 5-digit numerator and denominator ( BM 037 )
Internal keys cannot contain '&'. ( BM 052 )
ISO code & is already used for measurement unit & ( BM 060 )
Check T006A and setup of tables T006B and T006C started ( BM 100 )
Check T006A and setup of tables T006B and T006C completed ( BM 101 )
Language-dependent key & is not unique ( BM 102 )
Only uppercase characters possible in 3-character units of measurement ( BM 103 )
The 3 figure commercial key & is not unique ( BM 104 )
The 6 figure technical key & is not unique ( BM 105 )
The table T006A contains duplicate keys ( BM 106 )
Initial entries not allowed ( BM 107 )
EDI problems can occur if no ISO code is defined ( BM 200 )
System error: Field for unit does not have three or six characters ( BM 301 )
No language-specific unit defined in language &2 for internal unit &1 ( BM 302 )
No commercial unit of measurement defined for unit & in language & ( BM 303 )
No technical unit of measurement defined for unit & in language & ( BM 304 )
Unit & is not created in language & ( BM 305 )
Choose a unit that matches the dimension ( BM 309 )
Use a number field for the input value ( BM 310 )
Units of different dimensions cannot be converted ( BM 311 )
(Internal) unit & not defined in the unit table ( BM 312 )
Dimension is not defined ( BM 314 )
Conversion of dimensionless units is not possible ( BM 315 )
Use a number field for the output value ( BM 316 )
Units of measurement are assigned to different dimensions ( BM 393 )
Division by zero caught. Field: & & & ( BM 394 )
Units of measurement are assigned to different dimensions ( BM 395 )
Field overflow: Field &; value & ( BM 398 )
Specify a valid temperature unit ( BM 403 )
Specify a temperature value ( BM 404 )
There are temperature-dependent units for this dimension ( BM 405 )
Select the entries to be transported ( BM 406 )
Specify a valid pressure unit ( BM 407 )
The dimension 'pressure' is not defined ( BM 408 )
Specify a pressure value ( BM 409 )
& is not a time unit ( BM 499 )
SI units must have specific conversion factors ( BM 803 )
Additive constant is usually only relevant for temperatures ( BM 806 )
Could not find programs that use BOR constants ( BMA_GEN 002 )
Control error in BMA navigation component ( BMA_GEN 003 )
Cannot change the selected migration task ( BMA_GEN 004 )
Worklist update (table BMA_WLST) canceled ( BMA_GEN 006 )
Internal error when changing the navigation display ( BMA_GEN 007 )
Migration task locked. Cannot be changed. ( BMA_GEN 010 )
Write access not permitted for migration task ( BMA_GEN 011 )
Inconsistent data in the migration task display ( BMA_GEN 012 )
Worklist empty ( BMA_GEN 014 )
Migration tasks delegated from & to & (on & by &) ( BMA_GEN 016 )
Incorrect number range object & for worklist ( BMA_GEN 017 )
Could not load MIME resource (&) ( BMA_GEN 018 )
You have no authorization to import the object ( BMEN 001 )
Area menu referred to does not exist ( BMEN 088 )
Reference creates endless structure ( BMEN 089 )
Transaction code of menu option does not exist ( BMEN 090 )
The texts for the entry are not available in the system language ( BMEN 105 )
Cannot add new entries (Logon language <> Original language (&)) ( BMEN 107 )
This report is obsolete. ( BMEN 140 )
Report tree & does not exist ( BMEN 303 )
Can only be executed in display mode ( BMEN 351 )
The transaction cannot be executed in the background ( BMEN 352 )
Reference to area menu & causes recursion (Note 1277962) ( BMEN 356 )
Lexicon for search engine not yet generated ( BMEN 550 )
The material number is longer than the length set ( BMG 140 )
Execute this feature in production system also. ( BMG 145 )
Error occurred when converting bank data in table BU0BANK ( BNK 013 )
Grouping fields &2 &3 too long (&4 > &1) ( BNK_GENERAL 018 )
No authorization to create an HMAC key ( BNK_GENERAL 030 )
No Batch created in Format &2 ( BNK_GENERAL 123 )
Not all batches are created: Check application log ( BNK_GENERAL 124 )
Unable to resubmit a SEPA direct debit ( BNK_GENERAL 225 )
Delete the line on the detail screen of the dynamic selection ( BNK_GENERAL 229 )
Do not change value date or instructions after first approval ( BNK_GENERAL 230 )
Maximum posting amount is 13 digits 2 decimals. ( BNK_GENERAL 280 )
The FI-BNK can process documents with amount of 13 digits at maximum. ( BNK_GENERAL 281 )
The amount in Payment Doc.No. &1 in company code &2 is too high. ( BNK_GENERAL 282 )
The Appl. FI-BNK is active. Maximum amount is 13 digits including 2 dec. ( BNK_GENERAL 283 )
Problem with Workflow settings for Bank Communication Management ( BNK_UTIL 005 )
System error: object number was already assigned & ( BO 001 )
System error: Object type &1 does not exist ( BO 002 )
General object number: Incorrect object type passed, &1 not &2 ( BO 003 )
Object &1 not found ( BO 004 )
A program error occurred ( BO 005 )
Enter a valid object type & ( BO 010 )
Enter an ID that does not yet exist & ( BO 011 )
Caution when entering an object number ( BO 012 )
Function module & was called up incorrectly ( BO 020 )
Choose a valid name for the object type ( BO 101 )
Company code & is not maintained as BoE activated company ( BOE_MESSAGE 288 )
Error when saving BOM. Please see the application log. ( BOM 002 )
BOM processed successfully (see application log for more information) ( BOM 003 )
Use message type &2 to distribute &1 ( BOM 005 )
Distribution is locked due to BOM status ( BOM 006 )
Only result-oriented and non-configurable order BOM distribution ( BOM 007 )
Object was distributed successfully ( BOM 008 )
Object was not distributed ( BOM 009 )
Selection finds & BOMs ( BOM 013 )
No bill of material exists on &3 for &1/&2 ( BOM 014 )
Error in customer-specific event handling ( BOM 015 )
You can only update one IDoc at a time ( BOM 016 )
You can only update one bill of material at a time ( BOM 017 )
No entry in the distribution model for message type &2, system &1 ( BOM 019 )
No material variants exist ( BOM 030 )
Configurable material is not the same in source and target system ( BOM 031 )
No configurable material found for material variant & ( BOM 032 )
The IDOC contains no configurable material for material variant & ( BOM 033 )
Only positive values are valid for &1 = &2 ( BOM 041 )
&1 = &2 may not be greater than &3 = &4 ( BOM 042 )
Update indicator &1 is invalid (valid : I, D, R) ( BOM 044 )
Configurable materials are not the same ( BOM 045 )
Sales order requires BOM category "K" ("order BOM") ( BOM 101 )
BOM category requires alternative BOM 1 ( BOM 104 )
Consistency check when creating BOM item & was not successful ( BOM 201 )
Consistency check when changing BOM item & was not successful ( BOM 202 )
BOM item is not valid ( BOM 204 )
BOM item dependencies cannot be updated ( BOM 211 )
Consistency check when creating BOM header & was not successful ( BOM 251 )
Consistency check when changing BOM header & was not successful ( BOM 252 )
Bill of material is not valid ( BOM 254 )
New alternative is not allowed ( BOM 260 )
New variant does not exist ( BOM 261 )
Error during update: of &1 records, &2 records were updated ( BOM 302 )
Error during insert: of &1 records, &2 records were updated ( BOM 303 )
Error during delete: of &1 records, &2 records were updated ( BOM 304 )
Error during update: of &1 records, &2 records were updated ( BOM 306 )
Error during insert: of &1 records, &2 records were updated ( BOM 307 )
Error during delete: of &1 records, &2 records were updated ( BOM 308 )
Error during update: of &1 records, &2 records were updated ( BOM 310 )
Error during insert: of &1 records, &2 records were updated ( BOM 311 )
Error during delete: of &1 records, &2 records were updated ( BOM 312 )
Error during update: of &1 records, &2 records were updated ( BOM 314 )
Error during insert: of &1 records, &2 records were updated ( BOM 315 )
Error during delete: of &1 records, &2 records were updated ( BOM 316 )
Error during update: of &1 records, &2 records were updated ( BOM 318 )
Error during insert: of &1 records, &2 records were updated ( BOM 319 )
Error during delete: of &1 records, &2 records were updated ( BOM 320 )
Error during update: of &1 records, &2 records were updated ( BOM 322 )
Error during insert: of &1 records, &2 records were updated ( BOM 323 )
Error during delete: of &1 records, &2 records were updated ( BOM 324 )
Error during update: of &1 records, &2 records were updated ( BOM 326 )
Error during insert: of &1 records, &2 records were updated ( BOM 327 )
Error during delete: of &1 records, &2 records were updated ( BOM 328 )
Error during update: of &1 records, &2 records were updated ( BOM 330 )
Error during insert: of &1 records, &2 records were updated ( BOM 331 )
Error during delete: of &1 records, &2 records were updated ( BOM 332 )
Assembly for material &1 and sales order &2 &3 already exists ( BOM 601 )
Entry parameters are not complete ( BOM 602 )
Processing of knowledge-based structures not possible ( BOM 603 )
Alternative BOM &1 of the &2 was ignored ( BOM 604 )
It is not possible to copy the configuration ( BOM 608 )
Source plant is different to target plant ( BOM 611 )
An error occured during automatic component assignment ( BOM 614 )
Before executing the function please leave the detail screen ( BOM 615 )
No current log available ( BOM 616 )
An error occured when importing the BOMs ( BOM 617 )
No suitable logs exist for today's date ( BOM 618 )
An error occured during multi-level copying ( BOM 619 )
Reference date &1 exceeded - current date is used ( BOM 621 )
Explosion date could not be determined, today's date is used ( BOM 627 )
Input can not be displayed ( BOM 628 )
Browser can not be displayed correctly ( BOM 629 )
You do not have any user settings - create settings ( BOM 632 )
Subitem for item &1 &2 in BOM &3 &4 was not transferred. ( BOM 633 )
Assembly &1 was read in plant &2, and will not be fixed ( BOM 634 )
Update routines for indirect sales do not exist ( BON_ENH_MESS 001 )
Structure &1 is not contained in info structure &2 ( BON_ENH_MESS 007 )
Note: This function affects all clients ( BON_ENH_MESS 016 )
No rules for VAKEY formation defined for agreement type &1 ( BON_ENH_MESS 101 )
Source field &1 is not contained in structure &2 ( BON_ENH_MESS 102 )
Target field &1 is not contained in structure KOMFKGN ( BON_ENH_MESS 103 )
Error converting from &1 to &3 ( BON_ENH_MESS 104 )
No confirmations for agreement type &1 in settlement period (&2-&3) ( BON_ENH_MESS 105 )
Partial settlement not required (agreement: &1 - period: &2 to &3) ( BON_ENH_MESS 106 )
There are no sales to be settled for agreement &1 ( BON_ENH_MESS 108 )
&1 - partial settlements already exist in future periods (>&2) ( BON_ENH_MESS 110 )
No Customizing errors found ( BON_ENH_MESS 200 )
Agreement type &1: source structure &3 is not allowed ( BON_ENH_MESS 202 )
Agreement type &1: field &4 is not contained in structure &3 ( BON_ENH_MESS 203 )
Agreement type &1: do not use value or quantity fields ( BON_ENH_MESS 204 )
Agreement type &1: too many fields in the VAKEY ( BON_ENH_MESS 205 )
Agreement type &1: field &3 is not contained in target structure KOMFKGN ( BON_ENH_MESS 206 )
Agreement type &1: data was already updated ( BON_ENH_MESS 207 )
Agreement type &1: field length for target and source fields differs ( BON_ENH_MESS 208 )
Extended rebate active in agreement &1: standard settlement not allowed ( BON_ENH_MESS 787 )
Extended rebate not active: use the standard program ( BON_ENH_MESS 788 )
New rebate processing not active ( BON_ENH_MESS 789 )
Partial settlement not possible: there are open documents (doc &1) ( BON_ENH_MESS 791 )
Extended rebate is not active in agreement &1. ( BON_ENH_MESS 792 )
No confimration control key maintained in purchasing document &1 &2 ( BOR01 101 )
Point does not refer to a time zone; tracking not possible for this point ( BOR01 204 )
Inbound delivery &1: Delivery date and time have been changed ( BOR01 212 )
Dialog data automatically refreshed ( BORGR 002 )
Enter selection criteria for one object only ( BORGR 006 )
This function is not supported here ( BORGR 007 )
Internal error processing the function code ( BORGR 009 )
Posting is not possible as the object displayed is affected ( BORGR 013 )
Exiting object displayed as it no longer matches the display criteria ( BORGR 014 )
Unloading zone & does not exist or is not permissible ( BORGR 022 )
Unloading point & does not exist or is not permissible ( BORGR 023 )
Shipment & is being explained; you cannot add inbound deliveries ( BORGR 026 )
Invalid or inconsistent filter settings ( BORGR 028 )
Shipment view switched to "Display all" to display selected objects ( BORGR 037 )
No inbound deliveries could be transferred ( BORGR 038 )
&1 inbound deliveries transferred, others not considered ( BORGR 040 )
Do not mix inbound deliveries, inb. delivery groups and shipments in '&1' ( BORGR 041 )
Inbound deliveries found are not relevant for transport ( BORGR 042 )
Inbnd dely &1: The route sched.in the shipment are different, no transfer ( BORGR 044 )
In Item &: Pur. documents from SumJCs and/or standard value inconsistent ( BORGR 048 )
Purchasing documents for summarized jit calls determined again in item & ( BORGR 049 )
Unloading point &3 in document &1 &2 matches the current unloading point ( BORGR 052 )
Unloading point &2 in document &1 matches the old unloading point ( BORGR 060 )
Purchasing doc. &1 &2 is flagged as the preferred source of supply ( BORGR 061 )
The validity of source list entry &1 is outside delivery date &2 ( BORGR 064 )
Only PDs from the source list are taken into consideration for plant & ( BORGR 065 )
Quantity notified is greater than the &1 &2 qty ordered in document &3 &4 ( BORGR 080 )
The validity of document &1 is outside delivery date &2 ( BORGR 081 )
There are several preferred purchasing documents in the source list. &4 ( BORGR 092 )
Document & & is locked according to source list. &4 ( BORGR 096 )
Docs from source list are taken into consideration for matl &2 plant &1 ( BORGR 097 )
Not possible to unambiguously assign a material in purchasing doc. & ( BORGR 098 )
Document & & from IDoc and & & from summarized jit calls do not match ( BORGR 099 )
You can only make entries for one object type ( BORGR 102 )
Enter only the delivery note number or the group of inbound deliveries ( BORGR 103 )
Only objects that do not match the profile were found ( BORGR 104 )
The function is not allowed for node & ( BORGR 108 )
Inconsistent data transfer between objects; program canceled ( BORGR 112 )
You can only select one entry for function '&1' ( BORGR 113 )
Inb. dely &2 from vendor &1 is still packed in a shipment HU ( BORGR 150 )
Do not mix entries for an individual delivery or a group ( BORGR 151 )
Enter the vendor for the delivery note number or enter '*' for the vendor ( BORGR 152 )
Enter the vendor for the inb. delivery group or enter '*' for the vendor ( BORGR 153 )
Enter the delivery note no. or the inb. dely group (or *) for the vendor ( BORGR 154 )
Status of the HU is not 'Inspected' or 'Not inspected' ( BORGR 160 )
Several HUs found for these entries: Status not set ( BORGR 161 )
Some inbound deliveries in shipment &1 are still packed in shipment HUs ( BORGR 167 )
The shipment data is not up-to-date: Refresh the interface ( BORGR 168 )
&1 inbound delies have not been transferred due to the filter settings ( BORGR 172 )
Missing delivery with the same vendor/delivery note not allowed ( BORGR 182 )
Adding inbound delivery &1 to shipment with missing inb. dly. failed ( BORGR 185 )
Do not assign a material staging area to a door ( BORGR 200 )
Always assign a door to a material staging area ( BORGR 201 )
HUs are visually inspected in goods receipt only ( BORGR 202 )
Status &1 should be set ( BORGR 203 )
Status &1 should not be set ( BORGR 204 )
The inb. dely. displayed does not match the inb. dely. group; save first ( BORGR 250 )
Shipment &1 is planned; you cannot edit the inbound deliveries ( BORGR 302 )
Function canceled: You are not assigned to a profile ( BORGR 402 )
Select a transaction for a Customizing profile ( BORGR 403 )
User &2 already has user group &1 as default user group ( BORGR 410 )
User input help (F4) to enter an inbound delivery type ( BORGR 508 )
Vendor in the purchase order does not match vendor in the inb. delivery ( BORGR 509 )
&1 is already packed: Quantity reduction under &2 is not possible ( BORGR 513 )
The material entered does not match material &1 in the purchase order ( BORGR 524 )
The plant entered does not match plant &1 in the purchase order ( BORGR 525 )
Plant &1, storage location &2 for warehouse number &3 is not allowed ( BORGR 527 )
PO determination only simulated for this item ( BORGR 529 )
Comparison of delivery qties and planned qties for automatic packing ( BORGR 539 )
Summarized JIT calls for delivery items are inconsistent ( BORGR 544 )
Inbound delivery &1 still has items that do not refer to a PO ( BORGR 552 )
The inbound delivery could not be created ( BORGR 553 )
The inbound delivery still has items that do not refer to a PO ( BORGR 558 )
Total comparison of packing data with delivery items shows differences ( BORGR 592 )
&1 inbound deliveries created; not possible to transfer all to shpt &2 ( BORGR 602 )
Purchasing document &1 is not valid for an inbound delivery item ( BORGR 604 )
Purchasing document item &1 &2 is returns item ( BORGR 605 )
Reference to preceding document deleted ( BORGR 608 )
Inbound delivery is on hold an can only be displayed ( BORGR 609 )
The packaging data you have entered cannot be saved ( BORGR 610 )
Qty to be posted is larger than quantity &2 for which posting is possible ( BORGR 611 )
The amount to be posted has to be between &1 and &2: &3 ( BORGR 615 )
Quantities in selected HUs do not match quantities to be posted ( BORGR 616 )
Picked quantity cannot be smaller than the posted quantity: &3 ( BORGR 617 )
The delivery quantity cannot be smaller than the posted quantity: &3 ( BORGR 618 )
Storage location in item &1 adopted from summarized JIT calls ( BORGR 619 )
Auto. GR for inbound delivery &1 only partially possible (mat. doc. &2) ( BORGR 620 )
Movement type &1 is not allowed here; &2 &3 &4 ( BORGR 621 )
Transferred packaging data for inbound delivery has been rejected ( BORGR 629 )
Inbound delivery is on hold; no follow-on function possible ( BORGR 630 )
Item &1 is not relevant for goods receipt; increase quantity to &2 ( BORGR 634 )
Inbound delivery cannot contain summarized JIT call ( BORGR 636 )
Inbound delivery cannot be packed ( BORGR 637 )
Summarized JIT call &1 and item &2 cannot be deleted ( BORGR 641 )
Goods movement status was corrected ( BORGR 643 )
Goods supplier in purchase order is not the same as in inbound delivery ( BORGR 645 )
Freight forwarder in purchase order not the same as in inbound delivery ( BORGR 646 )
Due to automatic ordering movement type &1 is not allowed ( BORGR 647 )
Movement type &1 not allowed; follow-on movement type is not maintained ( BORGR 648 )
Movement type &1 not allowed as it is not assigned to the item category ( BORGR 649 )
Internal inconsistency: Item &1 not found ( BORGR 650 )
No inbound deliveries for pick-up list &1 found ( BORGR 651 )
Reference item &3 for item &2 not found ( BORGR 652 )
GR has already been posted for inb. delivery &1; no changes possible ( BORGR 653 )
Referenced pick-up list is ambiguous ( BORGR 654 )
Reference to pick-up list has not been specified ( BORGR 655 )
Existing inbound delivery &1 contains items with different pick-up list ( BORGR 656 )
Reference of inbound delivery item for item of pick-up list is empty ( BORGR 657 )
Mat. &3 of the inbound delivery is not mat. &4 of change IDoc ( BORGR 658 )
No changes received for inbound delivery &1, item &2 ( BORGR 659 )
HU &1 &2 contains several internal inbound deliveries (example &3) ( BORGR 660 )
Item &3: PO item &1 &2 of IDoc does not match existing PO item ( BORGR 661 )
Delivery quantity and quantity put away/picked cannot be changed ( BORGR 667 )
Reason is not valid here; movement type &1 ( BORGR 668 )
You can return a maximum of &2 for &1 ( BORGR 671 )
Difference quantity specified (&1) in &2 is not between 0 and &3 ( BORGR 672 )
Inbound delivery contains summarized JIT Calls; use GR dialog Automotive ( BORGR 700 )
Summarized JIT calls exist; item &1 &2 cannot be deleted ( BORGR 701 )
A goods receipt has already been posted for summarized JIT call &1 &2 ( BORGR 702 )
Inb. delivery contains SumJCs for which a GR has already been posted ( BORGR 703 )
Inbound delivery contains HUs; use goods receipt for Automotive ( BORGR 704 )
Inbound delivery is WM-relevant; use goods receipt for Automotive ( BORGR 705 )
Shipment contains references to missing inbound deliveries ( BORGR 707 )
Text &2 for object &1 (&3) could not be deleted ( BORGR 710 )
Text &2 in text determination procedure for object &1 (&3) does not exist ( BORGR 711 )
Error occurred when saving text &2 for object &1 (&3) ( BORGR 712 )
Reversal of mat. document &3 impossible (follow-up documents for &1/&2) ( BORGR 721 )
HU &1 belongs to several summarized JIT calls ( BORGR 750 )
HU &1 belongs to several items which contain summarized JIT calls ( BORGR 751 )
Summarized JIT call for handling unit &1 does not exist ( BORGR 752 )
Inbound delivery item for summarized JIT call &1 &2 not found ( BORGR 753 )
Handling unit &1 contains summarized JIT calls and lower-level HUs ( BORGR 754 )
The item has not been packed completely in handling units ( BORGR 755 )
HU &1: Error occurred during quty. conversion HU quty. - delivery quty. ( BORGR 756 )
Link HUs and summarized JIT calls in item &1 first ( BORGR 759 )
Item &1, summarized JIT call &2 &3: Posting of individual HUs impossible ( BORGR 762 )
Create a suitable database index for table VTTK ( BORGR 801 )
Value is obsolete; use valid values ( BORGR 805 )
Reference route & does not correspond to route & ( BORRT 004 )
Maintain route schedule determination conditions for vendor & ( BORRT 021 )
Point & for route & does not contain a reference ( BORRT 030 )
Route &1 has no stages ( BORRT 031 )
Route & has no conn. points with reference to the receiving point ( BORRT 032 )
Receiving point & is not the end point of route & ( BORRT 033 )
Shipment &2 already exists for schedule &1 ( BORRT 035 )
Shipment &2 for schedule &1 created ( BORRT 036 )
Delivery date and route adjusted to route schedule ( BORRT 041 )
Delivery date differs to that of the route schedule ( BORRT 042 )
Node &1 of route &2 does not refer to a receiving point ( BORRT 054 )
Route adapted in accordance with route schedule ( BORRT 055 )
Route schedule in this variant is not initial ( BORRT 064 )
Route schedule & in shipment does not match route schedule of the variant ( BORRT 065 )
Inbound delivery &1 &2 does not exist; reference is saved ( BORVII 001 )
Vendor (&1) or delivery note (&2) missing; reference not saved ( BORVII 002 )
There are references to missing vendor; status cannot be set ( BORVII 003 )
There are still references to missing vendor; status should still be '0' ( BORVII 004 )
Int. shipping notification &1: Time deviation shipment -> delivery ( BORVII 107 )
Creation of shipping notifications in shipment is not possible at present ( BORVII 108 )
Delivery &: Shipment type does not correspond to the delivery type ( BORVII 109 )
Sales document item for creating service entry not found ( BOS01 036 )
Cannot assign to superior outline level in hierarchy ( BOS01 042 )
Service lines not available for outline level ( BOS01 043 )
Service line (package number &1) not assigned to any outline level ( BOS01 044 )
Package number of outline level (data record &1) is incorrect ( BOS01 045 )
Superior outline level missing for outline level (data record &1) ( BOS01 046 )
Short text not available for service line (data record &1) ( BOS01 058 )
Internal line is not allowed in combination with altern. or line category ( BOS01 081 )
Error occurred on changing a service line ( BOS01 083 )
Error on reading costing items for cost estimate number &1 ( BOS01 084 )
Cannot transfer complete bill of services ( BOS01 160 )
Total takeoff quantity for & is getting < 0. ( BOS01 169 )
Detail missing for document &1: &2 ( BOS01 180 )
Set SD status flag in customizing ( BOS01 230 )
Delivery of item &1 not possible, because item with BOS ( BOS01 301 )
Unit price contract with relevancy to billing &1 not allowed ( BOS01 304 )
Billing plan for unit price contract not allowed ( BOS01 305 )
Flat-rate price contract with relevancy to billing &1 not allowed ( BOS01 306 )
Assignment of service number only for same unit of measure: &1 / &2 ( BOS01 400 )
Release exisiting billing documents to Accounting for the order item ( BOS02 003 )
No service lines exist that can be costed ( BOS03 004 )
Costing tool not determined ( BOS03 005 )
Descr. for structure &1 does not exist in logon language &2 ( BOS03 006 )
Descr. for addition/deduction &1 does not exist in logon language &2 ( BOS03 007 )
Cost transfer not possible; cond. types missing in pricing procedure &1 ( BOS03 008 )
Definition of cost component structure &1 is incomplete ( BOS03 009 )
Cost component structure &1 has not been assigned to pricing procedure &2 ( BOS03 010 )
Cost component &1 (struct. &2) has not been assigned to pricing proc. &3 ( BOS03 011 )
Condition type &1 does not exist in pricing procesure &2 ( BOS03 012 )
Disallowed status change for addition/deduction procedure &1, version &2 ( BOS03 050 )
Action cancelled; costing item cannot be changed ( BOS03 107 )
Account assignment cannot be determined ( BOS03 108 )
Quantity &1 &2 cannot be changed in simulation/mass change mode ( BOS03 109 )
No match between service lines/costing items and project/subproject ( BOS04 042 )
Cumulative quantity of &1 &2 is greater than service quantity of &3 &4 ( BOS04 064 )
Calculation rule is value for A/D &1 ( BOS04 071 )
Calculation rule is percent for A/D &1 ( BOS04 072 )
Percent field &1 is attached to a schema &2 and version &3 for A/D &4 ( BOS04 073 )
Value field &1 is attached to a schema &2 and version &3 for A/D &4 ( BOS04 074 )
Calculation rule value is not allowed ( BOS04 075 )
Percent field not allowed; calculation rule is fixed portion for A/D &1 ( BOS04 076 )
You cannot transfer additions/deductions; check the customizing entry ( BOS04 080 )
This report is no longer supported . ( BOS04 088 )
Multiple CO version is ON, but versions are not created. ( BOS04 094 )
Save the Cost estimate by saving the Sales Document. ( BOS04 097 )
Changes to the cost estimate should be done in ECP ( BOS04 098 )
Transaction is obsolete ( BOS04 099 )
Invalid date of birth ( BP00 022 )
Enter date in the format & ( BP00 065 )
Function module call up error: & parameter: & ( BP 001 )
Object does not exist ( BP 002 )
Object does not exist ( BP 003 )
Field overflow - Input not accepted ( BP 004 )
System error in : & Table: & Report: & Routine: & ( BP 005 )
No $ available for processing ( BP 008 )
You do not have authorizations ( BP 010 )
Sender and receiver are in the same hierarchy branch ( BP 011 )
Maintain interval & number ranges for budgeting and planning ( BP 012 )
Maintain profile & ( BP 013 )
No annual, overall, or period values allowed - correct profile & ( BP 014 )
Annual value maintenance not allowed ( BP 015 )
Overall value maintenance not allowed ( BP 016 )
Assign a plan or budget profile to the object ( BP 018 )
System is activating availability control -> see long text ( BP 021 )
Planning permitted in planning elements only ( BP 024 )
Define planning elements ( BP 025 )
Field overflow during value transfer from cost element planning ( BP 039 )
Profile & does not exist ( BP 045 )
WBS element & is not a billing element ( BP 048 )
Enter a year ( BP 050 )
Sender and receiver are identical ( BP 052 )
Only & lines were created ( BP 053 )
Place cursor on permitted input line ( BP 055 )
Receiver year must immediately follow sender year ( BP 056 )
Maximum of 999 input lines possible ( BP 061 )
You must not use version & ( BP 067 )
For & &, availability control is & ( BP 070 )
No data was selected for copying ( BP 099 )
Errors found --> Access the error log ( BP 101 )
Target version & does not exist ( BP 104 )
Reference version & does not exist ( BP 105 )
You must not use target version & ( BP 106 )
You must not use reference version & ( BP 107 )
You must not copy reference version & ( BP 108 )
You cannot change target version & ( BP 109 )
The budget has already been updated ( BP 115 )
Capital investment budget exists for & - transfers not allowed ( BP 121 )
Version & locked ( BP 128 )
Version & unlocked ( BP 129 )
Budgeting is not possible: Missing link to program item ( BP 136 )
Different exchange rate types/values in reference year & and tgt year & ( BP 162 )
You can only maintain overall values via a cap. investment program ( BP 163 )
Unit costing is not allowed in plan integrated objects ( BP 165 )
Maintain plan profile &1 for detailed planning ( BP 170 )
Fiscal year variant & must not be changed ( BP 175 )
Maintain a currency type in the budget-/plan profile & ( BP 179 )
Detailed planning was not copied for cost element planning ( BP 180 )
Combination &1 / &2 / &3 is blocked by user &4 ( BP 184 )
No annual values allowed - Please correct profile & ( BP 191 )
Inconsistent release records available ( BP 192 )
Release approval group &1 inconsistent regarding cover eligibility ( BP 196 )
The reference base for percentage entry is 0 ( BP 198 )
You cannot make a transfer between funds with differing number of periods ( BP 214 )
You cannot make transfer between funds with diff. fiscal year variants ( BP 215 )
Specify sender and receiver periods ( BP 216 )
Start dates differ for sender and receiver periods ( BP 217 )
No FM account assignments were selected. ( BP 219 )
Line cannot be changed or deleted because values still exist ( BP 230 )
Select at least one of the options, total or annual values ( BP 232 )
Source or target year were specified without selecting annual values ( BP 233 )
Version may not be copied onto itself ( BP 234 )
All FM account assignments of the fund & are blocked for other users ( BP 236 )
The selected combination of checks is invalid ( BP 237 )
Enter a budget subtype ( BP 240 )
Advance or carryforward with budget subtype not possible ( BP 242 )
Budget increase by revenues in commitment budget not possible ( BP 243 )
Define a valid budget subtype for revenues increasing the budget ( BP 244 )
The budget subtype is not allowed for manual postings ( BP 245 )
Define a valid budget subtype for cover eligibility ( BP 246 )
All FM account assignments in fund/functional area & are locked ( BP 248 )
Function not allowed ( BP 251 )
Functional area not possible on revenues side ( BP 253 )
Define a valid budget subtype for the HR budget ( BP 258 )
Maximum number of assigned budget subtypes has been exceeded ( BP 259 )
Chosen setting not possible ( BP 280 )
Planning horizon has been changed -> Check Customizing ( BP 281 )
Maintain the value date for &1 &2 &3 ( BP 284 )
PB: &1 / &2 is an assignment object, but not a budget object ( BP 290 )
CB: &1 / &2 is an assignment object, but not a budget object ( BP 291 )
Group assignments cannot be deleted ( BP 299 )
No superior budget object is defined for & ( BP 300 )
& is not defined as a budget object ( BP 301 )
& not defined as posting object ( BP 302 )
You have not defined a superior payment budget object for & ( BP 306 )
You have not defined a superior commitment budget object for & ( BP 307 )
PB: &1 / &2 has a superior assignment object ( BP 308 )
CB: &1 / &2 has a superior assignment object ( BP 309 )
Please choose the same amount for the commitment and payment budgets ( BP 310 )
Please enter a sender item ( BP 311 )
Please enter a receiver item ( BP 312 )
Please add a receiver item ( BP 313 )
Balance in commitment budget is not zero (balance:&) ( BP 315 )
Balance in payment budget is not zero (balance: &) ( BP 316 )
Item total is not the same as the control total in the commitment budget ( BP 319 )
Item total is not the same as the control total in the payment budget ( BP 320 )
System error in text processing ( BP 323 )
Reference document & has budget type & ( BP 324 )
Reference document & is a & ( BP 325 )
Reference document & contains commitments ( BP 326 )
The year in reference document & is not valid ( BP 327 )
The total values in reference document & are not permitted ( BP 328 )
There are no total values in reference document & ( BP 329 )
There is no year for the sender in reference document & ( BP 330 )
The annual values in reference document & are not permitted ( BP 331 )
There is no year for the receiver in reference document & ( BP 332 )
Please enter an expenditure item ( BP 333 )
& has no commitment budget ( BP 334 )
Year entered &1 is not in the interval from &2 to &3 ( BP 336 )
Please enter a year ( BP 341 )
Please enter a revenue item ( BP 351 )
Either enter the period on all or none of the lines ( BP 360 )
For distribution enter only one sender per group. ( BP 361 )
All years of cash effectivity must be the same ( BP 362 )
All budget types must be the same ( BP 363 )
Budget type & can not be used ( BP 365 )
All value types must be the same ( BP 366 )
No release groups possible ( BP 367 )
Only release groups are allowed ( BP 368 )
Line group & does not exist in the sender ( BP 369 )
No line group & exists in receiver ( BP 370 )
All funds and fiscal years must be the same ( BP 371 )
All budget subtypes must be the same ( BP 375 )
Only an FM account assignment is allowed as a sender ( BP 377 )
Change of BS template can lead to inconsistent budget data ( BP 378 )
Changes to the budget structure can cause inconsistencies in budget data ( BP 379 )
Function not allowed - budget structure being generated ( BP 383 )
Choose "Overall" ( BP 384 )
Changes to the budget structure can cause inconsistencies in budget data ( BP 385 )
BS templates cannot be maintained with direct input ( BP 387 )
Enter a fiscal year that is not '0000' ( BP 388 )
Enter "0000" as fiscal year ( BP 389 )
Choose "Overall" or a fiscal year for processing ( BP 390 )
&1/&2 cannot be defined as posting object ( BP 393 )
&1/&2 can not be defined as budget objects ( BP 395 )
Transaction currency is copied from the CO area currency ( BP 400 )
Transaction currency is copied from the object currency ( BP 401 )
Transaction currency is copied from the CO area currency ( BP 402 )
Currency settings in budget profile &1 are incorrect ( BP 403 )
Currency settings in budget profile &1 are incorrect ( BP 404 )
Transaction currency &3 is not equal to budgeting currency &4 ( BP 405 )
Transaction currency &3 is not equal to budgeting currency &4 ( BP 406 )
Enter a transaction currency ( BP 407 )
Transaction currency &1 is not equal to object curr. &2 for the receiver ( BP 408 )
Transaction currency &1 is not equal to area currency &2 of receiver ( BP 409 )
Receiver for budgeting currency inconsistent with transaction currency ( BP 410 )
Receiver for budgeting currency inconsistent with transaction currency ( BP 411 )
Receiver for budgeting currency inconsistent with transaction currency ( BP 412 )
Receiver for budgeting currency inconsistent with transaction currency ( BP 413 )
No update in foreign currency planned for controlling area &1 ( BP 414 )
Values were already entered in a currency different than &1 ( BP 415 )
The scaling settings selected cannot be used ( BP 416 )
The scaling settings forbid views in the object currency ( BP 417 )
Changes to the budgeting currency affect already budgeted objects ( BP 418 )
Incorrect currency setting in planning profile &1 ( BP 419 )
Incorrect currency setting in planning profile &1 ( BP 420 )
Values were already entered in a currency different than &1 ( BP 421 )
Transaction currency is copied from the object currency ( BP 422 )
Values in a different currency have already been entered ( BP 423 )
Values in a different currency have already been entered ( BP 424 )
Activity not allowed for FM area: &1 FYear: &2 Fund: &3 Bdgt version: &4 ( BP 451 )
Year-dependent activating of bdgt versions in FM area &1 is not possible ( BP 452 )
The year-independent budget versions block is not active in FM area &1 ( BP 453 )
Transaction not allowed for FM Area:&1 Fund:&2 Budget version:&3 ( BP 455 )
Deleting entry FM area &1, Version &2, Year &3 is not allowed ( BP 456 )
Deleting entry FM area &1, Version &2, Year &3 is not allowed ( BP 458 )
Number of financial bdgt years is less than cash effectivity years ( BP 459 )
Budget values on & could not be reconciled: Key fields I: & & & ( BP 460 )
Budget subtypes exist, euro reconciliation can only be partially executed ( BP 465 )
Error converting customizing in budgeting; Client/FM area: &1/&2 ( BP 467 )
No budget values exist for FM area &1 ( BP 469 )
FM area & is not an euro FM area ( BP 471 )
Euro FM area & is not active. ( BP 472 )
Euro FM area &1 has already been created for FM area &2 ( BP 473 )
Euro FM area & contains errors. ( BP 474 )
FM area &1 is assigned to euro FM area &2 ( BP 476 )
Chart of commitment items &1 is locked in year &2 ( BP 478 )
Budget data exists in Euro FM area & ( BP 482 )
Euro FM area & must not be deleted ( BP 484 )
Table TBP0L locked by &. Ledger for currency & cannot be inserted ( BP 490 )
Error during conversion of table &1 key: &2 ( BP 492 )
Error during conversion of table &1 key: &2 ( BP 496 )
Error during conversion of table &1 ( BP 497 )
The use of former budgeting is not supported ( BP 498 )
Order & already being processed ( BP 500 )
Order & cannot be processed (system error) ( BP 501 )
Order & is not a CO production order ( BP 502 )
Specify the project or a top WBS element of the project ( BP 552 )
Update run only possible for closed financial years ( BP 595 )
& & budget exceeded ( BP 601 )
& budget exceeded year & ( BP 602 )
Item & budget exceeded ( BP 603 )
Item & budget exceeded ( BP 604 )
& & budget exhausted ( BP 605 )
& budget for year & exhausted ( BP 606 )
Item & budget exhausted ( BP 607 )
Item & budget exhausted ( BP 608 )
& & budget almost exhausted ( BP 611 )
& budget for year & almost exhausted ( BP 612 )
Item & budget almost exhausted ( BP 613 )
Item & budget almost exhausted ( BP 614 )
Enter either an origin group or cost type ( BP 617 )
Cost type & does not exist ( BP 618 )
Origin group & does not exist ( BP 619 )
Item & budget item & & locked by user & ( BP 620 )
Budget item & & locked by user & ( BP 621 )
Availability control cannot be activated ( BP 623 )
Planning for WBS element & blocked at present ( BP 624 )
Error in lock management ( BP 625 )
& & payment budget exceeded ( BP 626 )
& payment budget for year & exceeded ( BP 627 )
Item & payment budget exceeded ( BP 628 )
Item & payment budget exceeded ( BP 629 )
& & payment budget exhausted ( BP 630 )
& payment budge for year & exhausted ( BP 631 )
Item & payment budget exhausted ( BP 632 )
Item & payment budget exhausted ( BP 633 )
& & payment budget almost exhausted ( BP 636 )
& payment budget for year & almost exhausted ( BP 637 )
Item & payment budget almost exhausted ( BP 638 )
Item & payment budget almost exhausted ( BP 639 )
No tolerance limits maintained in controlling area &, profile & ( BP 640 )
Time horizon and settings for availability control are contradictory ( BP 641 )
No tolerance limits yet maintained for profile & ( BP 642 )
Usage with no effect is relevant for background activation only ( BP 643 )
Enter usage for background activation ( BP 644 )
Enter at least one tolerance limit ( BP 645 )
Please assign a number range to activity & ( BP 652 )
Timeframe invalid ( BP 653 )
No currency key assigned to controlling area & ( BP 654 )
Settings in budget profile of measures have been changed ( BP 668 )
Reconstruct Availability Control ( BP 669 )
Budget profile can only be used when object currencies are the same ( BP 670 )
The object currencies in the budgeting hierarchy are not the same ( BP 671 )
Object currencies of && and WBS element & do not match ( BP 672 )
Object currencies in the hierarchy branch of WBS element & not the same ( BP 673 )
You cannot reverse the budget carryforward (fiscal year &1) ( BP 674 )
& & commitment budget exceeded ( BP 711 )
& commitment budget for year & exceeded ( BP 712 )
Item & commitment budget exceeded ( BP 713 )
Item & commitment budget exceeded ( BP 714 )
& & commitment budget exhausted ( BP 715 )
& commitment budget for year & exhausted ( BP 716 )
Item & commitment budget exhausted ( BP 717 )
Item & commitment budget exhausted ( BP 718 )
& & commitment budget almost exhausted ( BP 721 )
& commitment budget for year & almost exhausted ( BP 722 )
Item & commitment budget almost exhausted ( BP 723 )
Item & commitment budget almost exhausted ( BP 724 )
Availability control cannot be activated in partial access ( BP 727 )
Availability control activated without "suitable" budget ( BP 730 )
Activation type not maintained in budget profile & ( BP 732 )
Settings in budget profile & have been changed ( BP 733 )
No budget exists --> Availability control not activated ( BP 734 )
Report can only be started using another transaction -> ( BP 737 )
No agent could be determined for the message to be sent ( BP 738 )
"Activate availability control" function not active in partial access ( BP 739 )
Availability control cannot be deactivated ( BP 740 )
Different settings exist for availability control ( BP 741 )
Availability control can not be activated for hierarchical projects ( BP 744 )
CB: No assignment object determined for &3 / &4 ( BP 745 )
PB: No assignment object determined for &3 / &4 ( BP 746 )
PB item &1: No assignment object determined for &2 / &3 ( BP 747 )
CB item &1: No assignment object determined for &2 / &3 ( BP 748 )
Check against first BS element with budget ( BP 752 )
Check against first budget object ( BP 753 )
Availability control against total despite year-dependent master data ( BP 755 )
Caution: You are changing the hierarchy settings for avail. control -> ( BP 756 )
Availabty ctrl against total, despite abilty to only maintain annual vals ( BP 757 )
Caution: You are changing the hierarchy settings for avail. control -> ( BP 758 )
Perform reconstruction of releases and assigned values for &1/&2 ( BP 759 )
The assigned data for the posting is locked by user &1 ( BP 760 )
System error when locking the assigned data you processed ( BP 761 )
System error when accessing the lock table ( BP 762 )
PB: Check against first BS element with budget ( BP 765 )
PB: Check against first budget object ( BP 766 )
PB: Check against first assignment object ( BP 767 )
AB: Check against first BS element with budget ( BP 768 )
AB: Check against first budget object ( BP 769 )
AB: Check against first assignment object ( BP 770 )
Budget structure is not correct ( BP 777 )
Activating cover eligibility is not possible ( BP 779 )
Cannot use commitment type profiles together with cover eligibility ( BP 780 )
Cover eligibility and assignment object cannot be used together ( BP 781 )
There are too few own assigned funds in superior element ( BP 782 )
Use of budget objects is necessary if cover eligibility is active ( BP 783 )
Use of budget objects is necessary if cover eligibility is active ( BP 784 )
Cover eligibility relationships are being demanded ( BP 785 )
Deleting cover eligibility profile &1 not allowed ( BP 786 )
Entry is invalid; &1 / &2 must be eligible for cover ( BP 787 )
Functional area and cover eligibility can not be used simultaneously ( BP 788 )
Entry is not permitted; it is still assigned to a commitment type profile ( BP 790 )
Entry not permitted; a cover eligibility profile is still assigned ( BP 791 )
Av. control error message converted to less severe response by customer ( BP 795 )
Availability control activated without "suitable" budget ( BP 796 )
& & payment budget exceeded ( BP 801 )
& payment budget for year & exceeded ( BP 802 )
Item & payment budget exceeded ( BP 803 )
Item & payment budget exceeded ( BP 804 )
& & payment budget exhausted ( BP 805 )
& payment budget for year & exhausted ( BP 806 )
Item & payment budget exhausted ( BP 807 )
Item & payment budget exhausted ( BP 808 )
& & payment budget almost exhausted ( BP 811 )
& payment budget for year & almost exhausted ( BP 812 )
Item & payment budget almost exhausted ( BP 813 )
Item & payment budget almost exhausted ( BP 814 )
& & commitment budget exceeded ( BP 821 )
& commitment budget for year & exceeded ( BP 822 )
Item & commitment budget exceeded ( BP 823 )
Item & commitment budget exceeded ( BP 824 )
& & commitment budget exhausted ( BP 825 )
& commitment budget for year & exhausted ( BP 826 )
Item & commitment budget exhausted ( BP 827 )
Item & commitment budget exhausted ( BP 828 )
& & commitment budget almost exhausted ( BP 831 )
& commitment budget for year & almost exhausted ( BP 832 )
Item & commitment budget almost exhausted ( BP 833 )
Item & commitment budget almost exhausted ( BP 834 )
& Multiple revenue in the payment budget for year & exceeded ( BP 835 )
Item & multiple revenue in payment budget is exceeded ( BP 837 )
& Multiple revenue in the commitment budget for year & is exceeded ( BP 840 )
Item & multiple revenue in commitment budget is exceeded ( BP 842 )
All budget types must be the same for each line group ( BP 850 )
All value types must be the same per line group ( BP 851 )
All years of cash effectivity must be the same per line group ( BP 852 )
All budget subtypes must be the same per line group ( BP 853 )
The transaction currency and FM area currency entered differ ( BP 854 )
Commitment item types must be the same for sender and receiver ( BP 855 )
Budget object & cannot be deleted ( BP 856 )
Budgetary ledger is not active in FM area &, do not enter a posting date ( BP 860 )
Budgetary ledger is active in FM area &, enter a posting date ( BP 861 )
Enter a fiscal year that corresponds to the posting date ( BP 862 )
Enter a period that corresponds to the posting date entered ( BP 864 )
Enter a decision reason corresponding to the activity ( BP 867 )
First place the cursor on the required text line ( BP 870 )
Do not enter a document type: BL is not active in FM area & ( BP 871 )
Enter a document type: Budgetary ledger is active in FM area & ( BP 872 )
You can only apply for budget for one object ( BP 880 )
The network or network activity is not assigned to a WBS element ( BP 882 )
Costings have already been created in this project using Project Builder ( BP 885 )
A costing has already been created for the order, using the master data ( BP 886 )
The costing could not be saved ( BP 887 )
An individual costing was already created for the order in planning ( BP 888 )
A unit costing in currency & already exists ( BP 889 )
Unknown test case Type &1 for third-party tool &2 ( BPCA_3PTM_EN 015 )
This is a T100 test message ( BPCA_3PTM_EN 017 )
Parameter '&1' is unknown ( BPCA_3PTM_EN 020 )
Invalid value '&1' for parameter '&2' ( BPCA_3PTM_EN 021 )
Only one value is allowed for parameter '&1' ( BPCA_3PTM_EN 022 )
You cannot set a value for parameter '&1' ( BPCA_3PTM_EN 023 )
Wrong combination of parameter '&1' and option '&2' ( BPCA_3PTM_EN 024 )
Logical system &1 not in logical component &2 ( BPCA_AT_EN 066 )
Batch jobs not finished or TBOMs already created ( BPCA_BTCJ_EN 018 )
You cannot create a TBOM enhancement without new objects ( BPCA_EN 007 )
You cannot create a TBOM without content objects ( BPCA_EN 009 )
TBOM work item exists for executable &1. TBOM cannot be changed ( BPCA_EN 015 )
You cannot select the current test case ( BPCA_EN 017 )
The current executable object assignment does not exist ( BPCA_EN 022 )
Could not find test object info. TBOM recording not possible ( BPCA_EN 024 )
You can only record dynamic TBOM for the current executable ( BPCA_EN 035 )
Create TBOM failed due to communication problems with RFC destination &1. ( BPCA_EN 100 )
Communication to managed system not possible. ( BPCA_EN 101 )
Selected Business Process Hierarchy node reports no managed system! ( BPCA_EN 103 )
Check of managed system (&2) failed with exception "&1" ! ( BPCA_EN 104 )
E2E_TESTING_AGENT responded ! (see longtext) ( BPCA_EN 106 )
The static TBOM enhancement has been rerecorded ( BPCA_EN 112 )
BPCA-TBOM Error: &1 ( BPCA_EN 120 )
System-ID &1 does not exist in Solution Manager System Landscape ( BPCA_EN 125 )
No logical component found for logical system &1 and system role &2 ( BPCA_EN 126 )
Table is locked by another user (&1) or in another session. ( BPCA_EN 180 )
Dynamic TBOM creation is not supported in the managed system. ( BPCA_EN 200 )
Static depth without UPL filtering is greater than 10 ( BPCA_EN 227 )
System Role missing. Test Case Data possibly incorrect. See long text ( BPCA_EN 250 )
E2E functionality supported on 'ST-PI 2005_1_700' or higher ( BPCA_EN 355 )
TBOM: Get Internal Statistics failed (see long text) ( BPCA_EN 700 )
TBOM: Get internal statistics failed (see longtext). ( BPCA_EN 900 )
No Test Cases available. Optimization by changed objects ( BPCA_TST_SC_EN 005 )
You cannot add further attribute values ( BPCA_TST_SC_EN 017 )
Manual selection of test cases not possible ( BPCA_TST_SC_EN 022 )
Area adjusted automatically. Check ( BPCA_TST_SC_EN 025 )
Asynchronous optimization aborted. Close and reopen optimization ( BPCA_TST_SC_EN 032 )
Use this function only for partner test cases ( BPCA_TST_SC_EN 050 )
Total statistics not available ( BPCA_TST_SC_EN 101 )
No business partner role was selected ( BPOB 010 )
Business partner must exist in the business partner role category &1 ( BPOB 011 )
Cardinality of roles in role category &1 is inconsistent with Customizing ( BPOB 012 )
Assign the "person responsible" roles in contract processing ( BPOB 013 )
No FI customer exists for the main borrower &1 ( BPOB 023 )
Object type &1 not supported ( BPREP_BW 009 )
Corrupt data &1 on tab &2 not saved; create ticket ( BPR_TAB_EXTENSION 001 )
Changes will not be saved ( BPT_CRM 000 )
Changes will not be saved ( BPT_CRM 001 )
No Customizing entries exist for RFC destination ( BPT_CRM 006 )
There are already planned changes to business partner &1 ( BPU 012 )
There are already planned changes to contract account &1 ( BPU 013 )
Activating this function can cause problems ( BP_ADDON 010 )
Authorization group for non-activated transaction maintained ( BP_ADDON 020 )
Number of columns was adjusted to the budget data ( BP_ADDON 050 )
Payments &1: &2 &3 smaller than distributed budget &4 ( BP_ADDON 051 )
Commitments &1: &2 &3 smaller than distributed budget &4 ( BP_ADDON 052 )
Overall budget less than distributed budget ( BQ 001 )
- &: & <& (&) ( BQ 002 )
Annual budget & less than distributed budget ( BQ 003 )
- &: & <& (&) ( BQ 004 )
Overall budget less than cumulative budget ( BQ 007 )
- &: & <& (&) ( BQ 008 )
Annual budget & less than cumulative budget ( BQ 009 )
- &: & <& (&) ( BQ 010 )
- &: & <& (&) ( BQ 012 )
- &: & <& (&) ( BQ 013 )
- &: & <& (&) ( BQ 014 )
- &: & <& (&) ( BQ 015 )
Overall budget less than distributed budget ( BQ 016 )
Annual budget & less than distributed budget ( BQ 017 )
Overall budget less than cumulative budget ( BQ 018 )
Overall budget less than cumulative budget ( BQ 024 )
- &: & <& (&) ( BQ 025 )
Annual budget & less than distributed budget ( BQ 026 )
- &: & <& (&) ( BQ 027 )
Releases less than distributed budget ( BQ 030 )
- &: & <& (&) ( BQ 031 )
Releases less than distributed budget ( BQ 032 )
- &: & <& (&) ( BQ 033 )
Releases less than cumulative budget ( BQ 034 )
- &: & <& (&) ( BQ 035 )
Overall release less than distributed release ( BQ 036 )
- &: & <& (&) ( BQ 037 )
Annual release & less than distributed release ( BQ 038 )
- &: & <& (&) ( BQ 039 )
Overall release less than cumulative release ( BQ 040 )
- &: & <& (&) ( BQ 041 )
Overall budget less than overall release ( BQ 042 )
- &: & <& (&) ( BQ 043 )
Annual budget less than annual release ( BQ 044 )
- &: & <& (&) ( BQ 045 )
Overall budget less than overall release ( BQ 046 )
- &: & <& (&) ( BQ 047 )
Annual budget & less than annual release ( BQ 048 )
- &: & <& (&) ( BQ 049 )
Overall plan value less than plan value distributed ( BQ 051 )
- &: & <& (&) ( BQ 052 )
Annual plan value & less than plan value distributed ( BQ 053 )
- &: & <& (&) ( BQ 054 )
Overall plan value less than cumulative plan value ( BQ 057 )
- &: & <& (&) ( BQ 058 )
Annual plan value & less than cumulative plan value ( BQ 059 )
- &: & <& (&) ( BQ 060 )
Overall release less than distributed release ( BQ 070 )
- &: & <& (&) ( BQ 071 )
Annual release & less than distributed release ( BQ 072 )
- &: & <& (&) ( BQ 073 )
Overall release less than cumulative release ( BQ 074 )
- &: & <& (&) ( BQ 075 )
Overall budget less than overall release ( BQ 076 )
- &: & <& (&) ( BQ 077 )
Annual budget & less than annual release ( BQ 078 )
- &: & <& (&) ( BQ 079 )
Overall budget is negative ( BQ 090 )
- &: & (&) ( BQ 091 )
Annual budget & negative ( BQ 092 )
- &: & (&) ( BQ 093 )
Overall plan value less than cumulative plan value ( BQ 101 )
- &: & <& (&) ( BQ 102 )
Annual plan value & less than cumulative plan value ( BQ 103 )
- &: & <& (&) ( BQ 104 )
Overall budget less than cumulative budget ( BQ 105 )
- &: & <& (&) ( BQ 106 )
- &: & <& (&) ( BQ 110 )
- &: & <& (&) ( BQ 111 )
- &: & <& (&) ( BQ 112 )
Commitments (overall budget) less than distributed budget ( BQ 113 )
Commitments (annual budget) & less than distributed budget ( BQ 114 )
Commitments for the overall budget are less than the cumulated budget. ( BQ 115 )
Commitments for the full release are less than the distributed release. ( BQ 116 )
- &: & <& (&) ( BQ 117 )
Annual release of commitments & less than distributed release ( BQ 118 )
- &: & <& (&) ( BQ 119 )
Commitments for the full release are less than the cumulated release. ( BQ 120 )
- &: & <& (&) ( BQ 121 )
Commitments for the overall budget are less than the full release. ( BQ 122 )
- &: & <& (&) ( BQ 123 )
Annual budget for commitments & less than annual release ( BQ 124 )
- &: & <& (&) ( BQ 125 )
- &: & <& (&) ( BQ 127 )
- &: & <& (&) ( BQ 129 )
Annual budget & less than distributed budget ( BQ 152 )
- &: & <& (&) ( BQ 153 )
Overall budget less than cumulative budget ( BQ 154 )
- &: & <& (&) ( BQ 155 )
Overall plan value less than plan value distributed ( BQ 160 )
- &: & <& (&) ( BQ 161 )
Annual plan value & less than plan value distributed ( BQ 162 )
- &: & <& (&) ( BQ 163 )
Overall plan value less than cumulative plan value ( BQ 164 )
- &: & <& (&) ( BQ 165 )
Overall plan value less than cumulative plan value ( BQ 166 )
- &: & <& (&) ( BQ 167 )
- &: & <& (&) ( BQ 170 )
- &: & <& (&) ( BQ 171 )
- &: & <& (&) ( BQ 172 )
Payments (overall budget) less than distributed budget ( BQ 173 )
Payments (annual budget) & less than distributed budget ( BQ 174 )
Payments for the total budget are less than the cumulated budget. ( BQ 175 )
Payments for the full release are less than the distributed release. ( BQ 176 )
- &: & <& (&) ( BQ 177 )
Annual release for payments & less than distributed release ( BQ 178 )
- &: & <& (&) ( BQ 179 )
Payments for the full release are less than the cumulated release. ( BQ 190 )
- &: & <& (&) ( BQ 191 )
Payments for the total budget are less than the full release ( BQ 192 )
- &: & <& (&) ( BQ 193 )
Annual budget for payments & less than annual release ( BQ 194 )
- &: & <& (&) ( BQ 195 )
Overall budget is negative ( BQ 200 )
- &: & (&) ( BQ 201 )
Annual budget & negative ( BQ 202 )
- &: & (&) ( BQ 203 )
Overall budget payments negative ( BQ 204 )
- &: & (&) ( BQ 205 )
Annual budget payments & negative ( BQ 206 )
- &: & (&) ( BQ 207 )
Overall budget commitments negative ( BQ 208 )
- &: & (&) ( BQ 209 )
Annual budget commitments & negative ( BQ 210 )
- &: & (&) ( BQ 211 )
Total release is negative ( BQ 212 )
- &: & (&) ( BQ 213 )
Total release of payments is negative ( BQ 214 )
- &: & (&) ( BQ 215 )
Total release of commitments is negative ( BQ 216 )
- &: & (&) ( BQ 217 )
Annual release & is negative ( BQ 218 )
- &: & (&) ( BQ 219 )
Annual release of payments & is negative ( BQ 220 )
- &: & (&) ( BQ 221 )
Annual release of commitments & is negative ( BQ 222 )
- &: & (&) ( BQ 223 )
Financial budget value & less than distributed financial budget ( BQ 224 )
- &: & <& (&) ( BQ 225 )
Financial budget value & negative ( BQ 226 )
- &: & (&) ( BQ 227 )
- &: & <& (&) ( BQ 228 )
Annual value net vote & less than distributed net vote ( BQ 229 )
Balance fincl bud.value & less than distributed balance finan.bud.value ( BQ 230 )
- &: & <& (&) ( BQ 231 )
Financial budget value & less than commitment budget ( BQ 232 )
- &: & <& (&) ( BQ 233 )
Payment budget & less than commitment budget & ( BQ 234 )
- &: & <& (&) ( BQ 235 )
Financial budget value & less than commitment budget total ( BQ 236 )
- &: & <& (&) ( BQ 237 )
- &1: &2 <&3 (&4) ( BQ 239 )
- &1: &2 <&3 (&4) ( BQ 241 )
- &: & <& (&) ( BQ 243 )
- &: & <& (&) ( BQ 249 )
- &: & <& (&) ( BQ 251 )
- &: & (&) ( BQ 253 )
- &: & (&) ( BQ 255 )
- &: & <& (&) ( BQ 257 )
- &: & <& (&) ( BQ 259 )
- &: & <& (&) ( BQ 261 )
- &: & <& (&) ( BQ 263 )
- &: & (&) ( BQ 265 )
- &: & (&) ( BQ 267 )
- &: & (&) ( BQ 269 )
- &: & <& (&) ( BQ 271 )
- &: & <& (&) ( BQ 273 )
- &: & <& (&) ( BQ 275 )
- &: & <& (&) ( BQ 277 )
- &: & <& (&) ( BQ 279 )
- &: & (&) ( BQ 282 )
- &: & (&) ( BQ 284 )
- &: & <& (&) ( BQ 286 )
- &: & <& (&) ( BQ 288 )
Reassigning commitment item & causes budget inconsistencies;See long text ( BQ 400 )
Reassigning funds center & causes budget inconsistencies; See long text ( BQ 401 )
The query is not correctly defined; the fiscal year variant is missing ( BRAIN 006 )
The query cannot be executed as the data is inconsistent ( BRAIN 007 )
You can only work in client & ( BRAIN 009 )
The SAP BW system must not be operated in client & ( BRAIN 010 )
Error in number range for characteristic & ( BRAIN 011 )
The query & now reads on demand when navigating ( BRAIN 014 )
Query & now reads all the data at once ( BRAIN 015 )
Query & now selects data on demand when navigating and expanding hierchs ( BRAIN 016 )
Invalid read mode ( BRAIN 017 )
Date format in user master record cannot be interpreted ( BRAIN 020 )
Query contains too many selection elements ( BRAIN 028 )
Fiscal year variant must be uniquely specified for this query ( BRAIN 030 )
Cannot calculate calculated key figure &1 ( BRAIN 031 )
No authorization for element &1 &2. Cannot apply condition ( BRAIN 032 )
Number range object for characteristic & does not exist ( BRAIN 034 )
Query &1/&2 contains non-cumulative values but no time restriction ( BRAIN 035 )
Key figure &1 was not defined correctly ( BRAIN 036 )
A node entry is not possible here ( BRAIN 040 )
Element &1 not defined correctly ( BRAIN 044 )
Variable &1 for characteristic &2 has been converted to a required entry ( BRAIN 045 )
The cache was used despite virtual characteristics / key figures ( BRAIN 047 )
Number range interval for characteristic & is missing ( BRAIN 049 )
Error when reading cluster table RSIX for query & ( BRAIN 050 )
Error when writing in the internal buffer. See OSS note 156957 ( BRAIN 051 )
Characteristic &1 &2 is not in the InfoProvider. Elimination not possible ( BRAIN 053 )
Formula &1 with attribute &2 cannot be properly calculated ( BRAIN 054 )
Characteristic &1 has no hierarchies ( BRAIN 055 )
Cannot calculate character key figures ( BRAIN 058 )
Value '&1' (hex. '&3') of characteristic &2 contains invalid characters ( BRAIN 060 )
The node name '&1' contains not permitted characters ( BRAIN 061 )
Sheet '&1' contains not permitted characters ( BRAIN 062 )
Permitted charctrs for char. values in the Business Information Warehouse ( BRAIN 063 )
&1 &2: Normalization not possible for character key figures ( BRAIN 069 )
No SID found for value '&' of characteristic & (&) -> see longtext ( BRAIN 070 )
Could not enter characteristic value &1 with SID &2 in table &3 ( BRAIN 071 )
Internal structure for hierarchy & is inconsistent ( BRAIN 072 )
Hierarchy has been adjusted. Start the query again. ( BRAIN 074 )
Read mode is converted to 'Read query when navigating' ( BRAIN 075 )
You cannot place a presentation hierarchy on characteristic &1 ( BRAIN 076 )
You cannot change variable &1 for charact. &2 during query navigation ( BRAIN 077 )
A summation is not possible for character key figures &1 &2 ( BRAIN 080 )
Constant selection special function not available on 0INFOPROV ( BRAIN 081 )
Constant selection special function not available on 0INFOPROV ( BRAIN 082 )
A query cannot have globally constant elements in both structures ( BRAIN 083 )
The property 'display non accounted values' is not allowed here ( BRAIN 084 )
Variable &1 is not supported in exceptions ( BRAIN 085 )
Different hierarchies are used for characteristic &1 ( BRAIN 087 )
'Calculating result as...' was not executed ( BRAIN 090 )
Calculated single values as ... has priority ( BRAIN 092 )
Calculated key figure &1 is not defined correctly ( BRAIN 093 )
Some numbers are scaled. They are parenthesized in debug mode [ ] ( BRAIN 095 )
Numbers recalculated locally; paren. in debug mode [ ]; LPC_OFF = '&1' ( BRAIN 096 )
Characteristic &3 not available in InfoProvider ( BRAIN 101 )
Query & uses deleted key figure & ( BRAIN 102 )
Cannot use variable &1 in structure elements ( BRAIN 103 )
Conditions are active. Results are parenthesized in debug mode [ ] ( BRAIN 104 )
Char. &1 is cumulated. Values are parenthesized in debug mode [ ] ( BRAIN 105 )
A key figure has to be uniquely specified in all cells ( BRAIN 106 )
The query has to specify a key figure ( BRAIN 107 )
Currency translation cannot be carried out for element &1 ( BRAIN 108 )
Key figure definition shows other value for key figure &1 ( BRAIN 110 )
Constant selection is activated. Figures are bracketed [ ] ( BRAIN 112 )
Some key figures have exception aggregation. Figures are bracketed [ ] ( BRAIN 113 )
There are calculated elements. These results are bracketed [ ] ( BRAIN 115 )
Variable &2 is not permitted for the target currency ( BRAIN 117 )
SQL error occurred while reading value set table &1 ( BRAIN 118 )
Variable &2 is not allowed for the conversion key date ( BRAIN 119 )
Variable &2 is not allowed for the exchange rate type. ( BRAIN 120 )
&1 is not a valid key figures for InfoProvider &2 ( BRAIN 121 )
&1 is not a valid characteristic for InfoProvider &2 ( BRAIN 122 )
Query &1/&2 may not have read mode 'A' ( BRAIN 123 )
Transfer table THX_FORM is not correct ( BRAIN 124 )
Unable to generate query &2 without errors ( BRAIN 125 )
The program generated exceeds generation limits ( BRAIN 126 )
*---Deleted----* ( BRAIN 128 )
Too many characteristics (&1) are relevant for authorization ( BRAIN 129 )
Fiscal year variant should be established for key figure &1 ( BRAIN 130 )
A results row cannot be calculated ( BRAIN 131 )
Variable &2 is not permitted for the source currency ( BRAIN 132 )
Presentation hierarchy &2 acts as a dynamic filter ( BRAIN 133 )
Variable &1 for query key date has been changed to a required entry ( BRAIN 134 )
Key figure &2 (&1) contains an unknown operation. ( BRAIN 135 )
The query cannot be released for OLE DB for OLAP ( BRAIN 136 )
The query cannot be released for OLE DB for OLAP ( BRAIN 137 )
Normalization to query result not possible due to insufficient authoriz. ( BRAIN 138 )
Variable &1 obsolete. Data currentness set to '&3' instead ( BRAIN 139 )
Cumulated and ranked list exclude each other ( BRAIN 140 )
'Calculating result as...' was not executed ( BRAIN 141 )
Condition on &1, results row suppression active for &2 ( BRAIN 144 )
Function 'Calculate as...' cannot be executed ( BRAIN 145 )
Partitioning type '&3' is not appropriate for query &1/&2 ( BRAIN 147 )
The 'Display Non Postable Values' option has been activated ( BRAIN 149 )
InfoProvider &2 is not defined correctly. Compounding of &1 is incorrect. ( BRAIN 152 )
Characteristic &1 of PartProvider &2 is supplied with two diff. values ( BRAIN 153 )
Characteristic &1 is not filled by part provider &2 ( BRAIN 154 )
The characteristic &1 has to have a fixed value &3 in InfoProvider &2 ( BRAIN 155 )
Key figure &1 cannot be processed consistently in InfoProvider &4 ( BRAIN 156 )
Key figure &2 cannot be processed consistently in InfoProvider &3 ( BRAIN 157 )
Currency/unit cannot be initial ( BRAIN 158 )
Key figures are input for currency/units &1 &2 &3 ( BRAIN 159 )
&1 cannot be input-ready. It is a formula element. ( BRAIN 160 )
&1 cannot be input. &2 is not a basic key figure. ( BRAIN 161 )
&1 cannot be input. &2 has aggregation &3. ( BRAIN 162 )
&1 cannot be input-ready. &3 does not belong to an InfoProvider. ( BRAIN 163 )
&1 cannot be input-ready ( BRAIN 167 )
The settings for characteristic &1 and input mode &2 are incompatible ( BRAIN 168 )
The change data record &4 is not consistent ( BRAIN 170 )
Key figure &2 has exception aggr. &3, thus ref.char. &1 must be filled ( BRAIN 171 )
The change data record &2 is not consistent ( BRAIN 172 )
In aggregation level &1, char. &2 must always be filled ( BRAIN 177 )
Values cannot be entered in this context ( BRAIN 178 )
&1 is compounded and can only be set when &2 is fixed as well ( BRAIN 181 )
&1 cannot be input ready. Translation key &2 is complex. ( BRAIN 182 )
Exception aggregation reference characteristic &1 not in InfoProvider &2 ( BRAIN 184 )
Data in underlying InfoProvider has changed ( BRAIN 185 )
Exception aggregation ignored; &2 has no fixed time characteristic ( BRAIN 186 )
The selection element &1 includes too many rows ( BRAIN 187 )
Key figure & is not correctly defined ( BRAIN 190 )
Query & is not correctly defined. ( BRAIN 191 )
The key figure definition may not display the correct value for &2 ( BRAIN 194 )
The key figure definition may not display the correct value for &2 ( BRAIN 195 )
The key figure definition may not display the correct value for &1 ( BRAIN 196 )
The key figure definition shows another value for "&1" ( BRAIN 198 )
Key figure & is not correctly defined. ( BRAIN 199 )
Query contains selection elements with 'Constant Selection' only ( BRAIN 200 )
Property constant selection for element &1 is not necessary ( BRAIN 201 )
Test &1 &2 &3 &4 ( BRAIN 202 )
&1 cannot be input-ready. &2 has ref. characteristic for exception &3. ( BRAIN 204 )
Characteristic relationships for &1 are inconsistent, no input possible ( BRAIN 205 )
Formula & uses operands with incompatible dimensions ( BRAIN 206 )
The key figure defintion may not display the correct value ( BRAIN 208 )
Formula &1 (&2) contains a formal error ( BRAIN 209 )
Query is not input-ready (temporal hierarchy join active on &1) ( BRAIN 210 )
Key figure &1 is not correctly defined ( BRAIN 212 )
Key figure &1 is not correctly defined ( BRAIN 213 )
InfoProvider &1 is inactive. Please activate it. ( BRAIN 214 )
No data found; dummy record generated for key figure definition ( BRAIN 216 )
Number entered for &1 &2 has too many digits ( BRAIN 217 )
Property "Constant Selection" is not possible for &1 ( BRAIN 218 )
&1 cannot be input ready. &3 is not a real key figure. ( BRAIN 219 )
There may not be more than 199 fiscal year variants ( BRAIN 220 )
Fiscal year variant must be specified uniquely in query ( BRAIN 221 )
Characteristic &1 has a constant value (&2) and cannot be used ( BRAIN 222 )
InfoProvider &1 does not permit entries in this application ( BRAIN 223 )
Query is input ready; &1 will be added as a free characteristic ( BRAIN 224 )
Query &1/&2 changed to "Read Current Data" ( BRAIN 225 )
Variable &1[&2] must not have an offset, length, boolean or dimension ( BRAIN 226 )
Ref. char. is incorrectly assigned for InfoProvider &1 and key figure &3 ( BRAIN 227 )
MultiProvider &1 contains two instances of InfoCube &2 ( BRAIN 228 )
Could not buffer query structures. Buffer too small ( BRAIN 230 )
For &1, parameter &2 can only have references to &3 (current value = &4) ( BRAIN 231 )
Get data for aggregate part &1 of exactly one DTP from delta part &2 ( BRAIN 232 )
Aggregate part &1 must not be a real-time InfoCube ( BRAIN 233 )
Property 'All Basic Key Figures Input Ready' is not permitted for &1 ( BRAIN 234 )
For &1, aggregate part &2 must have a fully-fledged delta method ( BRAIN 235 )
Reading of aggregate part &2 deactivated ( BRAIN 236 )
Reading of delta part &3 deactivated ( BRAIN 237 )
Reading of delta pair &2 &3 was switched off ( BRAIN 238 )
&2 is not correct for variable &1. Changed from '&3' to '&4'. ( BRAIN 243 )
Query & is not correctly defined. ( BRAIN 253 )
Variable &2 is ignored if no entries are made at runtime ( BRAIN 255 )
Query & is not correctly defined. ( BRAIN 257 )
Key figure '&1' is not correctly defined ( BRAIN 258 )
Characteristic &1 no longer exists in InfoProvider ( BRAIN 260 )
Characteristic &1 has a constant value (&2) and cannot be used ( BRAIN 261 )
Characteristic &1 has a constant value (&2) and cannot be used ( BRAIN 262 )
&1 matches &2, but in InfoProvider &4, &3 has a larger value ( BRAIN 263 )
For non-cumulative InfoCubes, time chars must be assigned identically ( BRAIN 264 )
Characteristic &1 is not in InfoProvider &2 or is not visible ( BRAIN 265 )
MultiProvider &1 is not consistent; input not possible ( BRAIN 266 )
Characteristic &1 does not exist; exception aggregation not possible ( BRAIN 267 )
Web application processing terminated ( BRAIN 278 )
Bookmarking not possible ( BRAIN 279 )
Disaggregation not possible. No reference data found ( BRAIN 280 )
Error when generating dataProvider & ( BRAIN 282 )
A presentation hierarchy must be active for characteristic '&1' ( BRAIN 283 )
Variable &1[&2] is not defined properly ( BRAIN 284 )
Variable &1 contains too many values ( BRAIN 286 )
Cannot enter foreign currency in cell ("&1, &2") ( BRAIN 287 )
Error while reading data; navigation is possible ( BRAIN 289 )
Error while writing master record "&1"/SID "&4" of characteristic &2 ( BRAIN 290 )
Combination of top-down budgeting and disaggregation ( BRAIN 291 )
Query uses selection on 0REQUID; data status '&1' -> '&2' ( BRAIN 292 )
Query uses selection on 0REQUID; but data status = '&1' ( BRAIN 293 )
No input for variable &2; variable will therefore not be interpreted ( BRAIN 294 )
System error in program & and form & ( BRAIN 299 )
System error: & & & & (internal error) ( BRAIN 302 )
InfoProvider &1 contains complex aggregation level &2 ( BRAIN 303 )
Aggregation level &1 contains &2 as InfoProvider ( BRAIN 305 )
InfoObject &1 cannot be found in InfoProvider &2 ( BRAIN 306 )
InfoObject &1 is not suited to be of data type DELTACHANM ( BRAIN 307 )
&1 is restricted in element &2/&3 ( BRAIN 308 )
Explicit sel. on NLS InfoProvider in MultiProvider are not supported ( BRAIN 312 )
CMP problem occurred in characteristic &1 for InfoProvider &2 ( BRAIN 313 )
Selection on characteristic &1 is not supported here ( BRAIN 314 )
Value "&1" (HEX &4) of characteristic &2 contains an error at position &3 ( BRAIN 315 )
Aggregates for InfoCube &1 cannot be used ( BRAIN 316 )
SID = &2 does not exist for characteristic &1 or is not selected ( BRAIN 317 )
InfoProvider &1 does not exist or was changed at runtime ( BRAIN 321 )
InfoObject &1 is no longer in MultiProvider &2 ( BRAIN 324 )
&1 has &2, but &1 has a higher value in MultiProvider &3 ( BRAIN 325 )
Compounding inconsistency in aggregation level &3 for InfoObject &1 ( BRAIN 326 )
Hierarchy "&1" is defective because fiscal year variant &2 does not exist ( BRAIN 328 )
Specify &2 dependent on the fiscal year variant &1 ( BRAIN 334 )
Characteristic &1: Interval hierarchy + key day from data not supported ( BRAIN 335 )
Hierarchy "&2" from characteristic &1 cannot be used here ( BRAIN 336 )
Invalid parameterization of sorting for characteristic &1 in the DATA_SET ( BRAIN 337 )
Characteristic &1 is not included in aggregation level &2 ( BRAIN 338 )
Selection &1 = '&2' is not supported or is not useful ( BRAIN 339 )
Factory calendar &1 does not exist ( BRAIN 341 )
Date &1 lies outside of the factory calendar &2 validity ( BRAIN 342 )
Char. &1 is not a time char.; exception aggregation &2 is not possible ( BRAIN 344 )
No hierarchies in characteristic &1;exception aggregation &2 not possible ( BRAIN 345 )
&1: The disaggregation settings will be ignored ( BRAIN 346 )
Time characteristic &1 must be assigned identically for &2 ( BRAIN 348 )
More than one hierarchy/derivation type used for characteristic &1 ( BRAIN 357 )
Characteristic &1 must have the same hierarchy as characteristic &2 ( BRAIN 359 )
Variable &1 cannot be used in an exception/condition ( BRAIN 361 )
Technical error in class &2 &3 characteristic &1 ( BRAIN 364 )
Access type not possible for "characteristic relationships" result values ( BRAIN 365 )
Time stamp &1 in table RSMDATASTATE is invalid (InfoCube = &2) ( BRAIN 368 )
Incorrect identification of characteristic &1 in PartProvider &2 ( BRAIN 370 )
Query uses the virtual characteristic &1; input not possible ( BRAIN 371 )
&1 cannot be input-ready; &3 is calculated by user exit ( BRAIN 372 )
The InfoProvider properties for &1 are not the same as the system default ( BRAIN 376 )
Variable for "Data Integrity" cannot be used ( BRAIN 377 )
Formula element '&1 &2' cannot be input-ready ( BRAIN 378 )
InfoProvider &1 inconsistent: PartProvider &2 is not actively available ( BRAIN 379 )
Cannot get a valid target currency - currency translation &1 ( BRAIN 381 )
Error occurred during currency conversion (&1) ( BRAIN 390 )
InfoCube &1 has been switched to 'Load'; It cannot be saved ( BRAIN 391 )
Key figures with formula aggregation are in square brackets [ ] ( BRAIN 394 )
Key figures with internal business volume are in square brackets [ ] ( BRAIN 395 )
Reference characteristic &1 is probably not suitable for &2 ( BRAIN 396 )
InfoSet &1 does not return any data. See long text ( BRAIN 398 )
Characteristic &1 must be contained in the navigation. ( BRAIN 401 )
Characteristic & must be uniquely selected in the query. ( BRAIN 404 )
InfoObject &1 does not exist in InfoProvider ( BRAIN 407 )
Characteristic &1 is not permitted for selection. ( BRAIN 408 )
Characteristic &1 is not permitted for navigation. ( BRAIN 409 )
Variable &1 is not allowed in a calculated key figure ( BRAIN 414 )
Incorrect FRANGE row in FORM/DIM/FAC for InfoObject &1 ( BRAIN 415 )
InfoObject & is used in both structures of the query ( BRAIN 416 )
Variable &1 does not exist or is incorrectly used in "&4" ( BRAIN 418 )
SELOPT/query variable &4 (&1) does not allow any further selections ( BRAIN 420 )
Element &1 is not correct ( BRAIN 421 )
Formula operation &1 is not correct (formula &2) ( BRAIN 422 )
Calculation time 'before aggregation' is not allowed for &1 ( BRAIN 425 )
Element &1 is not correct ( BRAIN 428 )
Operation &1 is not allowed here (formula &2) ( BRAIN 429 )
Constant &1 is not permitted ( BRAIN 430 )
InfoObject &1 must be selected uniquely in all cells ( BRAIN 431 )
Variable &1 (&2) is not used in the query definition ( BRAIN 433 )
Structure &1 contains no selection items ( BRAIN 434 )
Variable &1 cannot be used in InfoProvider &3 ( BRAIN 436 )
Variable &1 is used for two different characteristics ( BRAIN 437 )
Variable &1 cannot be used in this query ( BRAIN 438 )
Variable &1 cannot be used in this query ( BRAIN 439 )
Variable &1 cannot be used in this query ( BRAIN 440 )
Variable &1 cannot be used in this InfoProvider ( BRAIN 441 )
Variable &1 cannot be replaced in this query ( BRAIN 442 )
Various aggregations are added in &. ( BRAIN 443 )
Not possible possible to move variables &1 ( BRAIN 444 )
Variable &1 cannot be used in this query ( BRAIN 445 )
Variable &1 is used for two different characteristics ( BRAIN 446 )
Time of calculation 'Before Aggregation' is obsolete ( BRAIN 447 )
Formula variable &1 cannot be replaced from text ( BRAIN 453 )
Query &1 is too large. ( BRAIN 457 )
Key figure &1 is incorrect. ( BRAIN 458 )
Only "Equal To" and "Not Equal To" selections are permitted for char. &1 ( BRAIN 459 )
Characteristic &1 set to '&2'; PartProvider &3 will not be read ( BRAIN 462 )
Characteristic &1 is set to '&2'; PartProvider &3 returns just some data ( BRAIN 463 )
Characteristic &1 set to '&2'; PartProvider &3 will not be read ( BRAIN 464 )
Query is input-ready; &1 will be added as a free characteristic ( BRAIN 466 )
Proposed values for characteristic &1 match filter ( BRAIN 469 )
Key figure &1 &2 is not correctly defined. ( BRAIN 471 )
Variables for characteristic &1 cannot be processed ( BRAIN 473 )
Error in calculated key figure [&1] &2 ( BRAIN 476 )
MultiProvider hint for &1 in PartProvider &2 cannot be checked (&3) ( BRAIN 483 )
Key figure definition does not correspond to definition ( BRAIN 484 )
'Always Suppress Results Rows' not used for &1 ( BRAIN 485 )
&1: The disaggregation settings will be ignored ( BRAIN 486 )
InfoProvider &1 not activated correctly ( BRAIN 499 )
Unknown or deleted query ( BRAIN 501 )
Invalid filter on &1: Filter changed ( BRAIN 502 )
The key date derivation type &1 for InfoProvider &3 not applicable ( BRAIN 504 )
Two different hier. not allowed for elimination of int. business volume ( BRAIN 505 )
Illegal combination of bucket with compounding for characteristic &1 ( BRAIN 506 )
Illegal entry: Selection &2 on characteristic &1 contains operator "CP" ( BRAIN 508 )
Break point RRK_RTO_OPEN reached ( BRAIN 511 )
Break point RRK_LIST_NOTIFY reached ( BRAIN 512 )
Break point RSDRC_SELDR_SPLIT reached ( BRAIN 513 )
Break point RRK_DATA_GET reached ( BRAIN 514 )
Break point FILL_SP_1 reached ( BRAIN 515 )
Display query definition break point reached ( BRAIN 516 )
Display table break point reached ( BRAIN 517 )
Display generated report ( BRAIN 518 )
Elimination of internal business volume - breakpoints reached ( BRAIN 519 )
Breakpoints - Instantiation of Input Help ( BRAIN 520 )
Breakpoint - Display SQL Statement (F4) ( BRAIN 521 )
Breakpoint - Read Data ( BRAIN 522 )
Breakpoint - Read Data for Hierarchies ( BRAIN 524 )
'Delta buffer' breakpoint reached ( BRAIN 526 )
'Saving of application data' breakpoint reached ( BRAIN 527 )
'Plan buffer' breakpoint reached ( BRAIN 528 )
Break points overview ( BRAIN 529 )
Breakpoint MultiProvider SPLIT ( BRAIN 531 )
Query & is reading the data ( BRAIN 541 )
&1 is ready for input but is hidden ( BRAIN 542 )
Only basic key figures are allowed with 'Before Aggregation' calculation ( BRAIN 545 )
&3 is not allowed with 'Before Aggregation' calculation ( BRAIN 546 )
Print request does not exist ( BRAIN 550 )
The print parameters need to be reset ( BRAIN 552 )
Unposted values cannot be displayed for &1 ( BRAIN 554 )
Software error (see long text). To correct, implement Note &1. ( BRAIN 555 )
'&4' needs to be defined for variable &1[&2] with dimension '&3' ( BRAIN 556 )
Applied condition "&4" does not return a unique result ( BRAIN 557 )
Input-ready property of query &1/&2 has been revoked ( BRAIN 558 )
Inverse formulas: General formal error ( BRAIN 559 )
Inverse formulas are not permitted if the key figure is in the filter ( BRAIN 560 )
Inconsistent carrier &1 of a formula group (see long text) ( BRAIN 561 )
Inconsistent formula group: Element &1 is in the wrong structure ( BRAIN 562 )
Carrier &1 of the formula group is not in the key figure structure ( BRAIN 563 )
Input-ready formula &1 does not have any inverse formulas ( BRAIN 564 )
Input-ready %GT formula &1 has an illegal operand ( BRAIN 565 )
Input-ready deactivated; cell redefinition in inverse formula ( BRAIN 566 )
Input-ready deactivated: Cell redefinition in inverse formula ( BRAIN 567 )
Inverse formula is missing for &2 for input-ready formula &1 ( BRAIN 568 )
Illegal operands in inverse formula &2 ( BRAIN 569 )
Input-ready formula &1 uses illegal exception cell &2 ( BRAIN 570 )
Input-ready %GT formula &1 is not correct: Data type not correct ( BRAIN 571 )
Input-ready deactivated; cell redefinition in inverse formula ( BRAIN 572 )
Input-ready deactivated; a > formula is being used ( BRAIN 573 )
'&1 &2' cannot be disaggregated because of cyclical references ( BRAIN 574 )
BWA/SAP HANA will be used despite virtual characteristics/key figures ( BRAIN 575 )
The value for '&1 &2' cannot be calculated ( BRAIN 576 )
Input-ready formula '&1 &2' cannot be inverted ( BRAIN 581 )
Element '&1 &2' is temporarily fixed or not input-ready ( BRAIN 585 )
Distribution targets are not changeable or have already been changed ( BRAIN 589 )
The compounded display attribute &1 is not supported ( BRAIN 598 )
An error occurred with the maintenance of the query directory. ( BRAIN 600 )
Handle & is unknown to the message collector. ( BRAIN 610 )
Text variable &1 in "&3" cannot be replaced - value is not unique ( BRAIN 612 )
Number variable & cannot be replaced in element &3 ( BRAIN 613 )
Moved value &1 is not within the allowed value range ( BRAIN 617 )
Unable to move &1; fiscal year variant is ambiguous ( BRAIN 618 )
Value &2 is too long for variable &1 ( BRAIN 619 )
Please enter a valid value for characteristic &. ( BRAIN 626 )
Value '&2' is not valid for variable &1 or does not exist ( BRAIN 627 )
Specify a value for variable & ( BRAIN 629 )
No value could be determined for variable &. ( BRAIN 632 )
Enter a valid value for the variable &1 ( BRAIN 642 )
Value '&2' for variable &1 is invalid ( BRAIN 643 )
Error for variable &2 in customer enhancement &1 ( BRAIN 649 )
Could not determine a value for variable & from the authorizations ( BRAIN 656 )
Value "&1" for user-exit variable &2 is invalid ( BRAIN 657 )
Function module does not exist for SAP exit variable &1 ( BRAIN 659 )
Maximum number of columns (&) exceeded. Result is incomplete. ( BRAIN 674 )
Maximum number (&) of drilldown characteristics is exceeded ( BRAIN 696 )
Cannot apply currency translation type & in InfoCube & ( BRAIN 698 )
CATT: Trace termination (short dump) when recording ( BRAIN 726 )
CATT: Inconsistency with data staging ( BRAIN 727 )
CATT: Tables have changed ( BRAIN 728 )
Reporting Agent setting already exists: &1 ( BRAIN 730 )
Key figure &1 cannot be triggered ( BRAIN 731 )
Variable &1 not in query ( BRAIN 738 )
Variable &1[&2] must be input ready ( BRAIN 739 )
Variable &1[&2] cannot be input-ready ( BRAIN 741 )
Invalid input for variable "&1" ( BRAIN 742 )
Text variable &1 in "&3" cannot be replaced - value not found ( BRAIN 748 )
A query must be selected first ( BRAIN 758 )
Maximum number of pages exceeded: Sort number &1 ( BRAIN 759 )
Characteristic sequence has changed: Check break areas ( BRAIN 761 )
No print parameters for the batch mode printing are maintained ( BRAIN 762 )
A sort number must first be chosen ( BRAIN 764 )
Only queries with structures are allowed when printing ( BRAIN 766 )
Scheduling package is empty ( BRAIN 767 )
Select a query variant for the selected setting ( BRAIN 768 )
Characteristic and Attribute columns are too wide ( BRAIN 769 )
No columns chosen for the output ( BRAIN 770 )
Scheduling a job is only possible in display mode ( BRAIN 771 )
Technical name &1 is not in the customer namespace ( BRAIN 777 )
The setting is still being used in scheduling packets ( BRAIN 779 )
Scheduling packet &1 is not available ( BRAIN 788 )
Setting &1 is not available ( BRAIN 789 )
Setting &1 is not suitable for printing in the background ( BRAIN 790 )
Setting &1 is not suitbale for Exception Reporting ( BRAIN 791 )
Query &1 for setting &2 is not available (active) ( BRAIN 792 )
Enter valid values for variables "&1" and "&2" ( BRAIN 799 )
You do not have the authorization for component &3 ( BRAIN 800 )
You do not have the authorization for the selected InfoCatalog ( BRAIN 801 )
You do not have the authorization for workbook &1 ( BRAIN 802 )
Unposted values on navigation attribute &1 are not displayed ( BRAIN 803 )
You do not have authorization to read object &1 '&2' ( BRAIN 804 )
Your user master record is not sufficiently maintained for object &1 ( BRAIN 805 )
No authorization for evaluation along hierarchy &3 ( BRAIN 806 )
Error in the authorization check for authorization object &1; '&2' ( BRAIN 807 )
Please transfer the InfoObject 0TCTAUTHH from technical content ( BRAIN 810 )
Could not successfully write transport request (&1) ( BRAIN 811 )
The interval [&3,&4] for authorization &2, object &1 is not permitted ( BRAIN 814 )
Characteristic &1 does not exist. Check authorizations. ( BRAIN 817 )
You have no authority for a characteristic value from characteristic &1 ( BRAIN 818 )
No authority for the node from characteristic &1, hierarchy &2 (&3,&4) ( BRAIN 819 )
Object & cannot be changed because it still contains authorizations ( BRAIN 821 )
Authorization field & still being used in authorization objects ( BRAIN 823 )
Name &1 for the authorization object is not in the correct namespace ( BRAIN 830 )
Activity (ACTVT) field could not be added to &1 ( BRAIN 839 )
Some characteristics require aggregation authorization, for example, &1 ( BRAIN 840 )
No variable specified for authorization-relevant characteristic &1 ( BRAIN 841 )
Metadata for InfoObject &1 is inconsistent ( BRAIN 860 )
For characteristic &1, input help mode &2 was executed instead of mode Q ( BRAIN 861 )
For characteristic &1, input help mode &2 was executed instead of mode P ( BRAIN 862 )
Cannot execute search; hierarchy is too large ( BRAIN 863 )
No unposted values displayed on compound parent &1 ( BRAIN 866 )
No exception aggregation in BWA for &1. There is no obvious reason why. ( BRAIN 878 )
No exception aggr. in BWA for &1 because user decision is overridden ( BRAIN 887 )
No exception aggr. in BWA for constant &1. User decision overridden. ( BRAIN 888 )
Program "&1" for characteristic &2 not available ( BRAIN 889 )
Shared memory overflow while writing cache. Check your memory settings. ( BRAIN 895 )
Delta method not possible for non-cumulative key figures ( BRAIN 896 )
'&1 &2' is not input-ready. The restriction is not in the filter. ( BRAIN 900 )
'&1 &2' is not input-ready: Data slices, characteristics relationships ( BRAIN 901 )
Compound parent &1 is not in the MultiProvider ( BRAIN 910 )
Database is inconsistent! The selection could deliver incorrect data ( BRAIN 999 )
Error occurred when starting the parser: &1 ( BRAINOLAPAPI 011 )
Method &1 call not permitted. See long text ( BRAINOLAPAPI 134 )
Variables defined at invalid postion. See long text ( BRAINOLAPAPI 136 )
Using NON EMPTY is not permitted. See long text ( BRAINOLAPAPI 137 )
Using calculated members is not permitted. See long text ( BRAINOLAPAPI 138 )
Using named sets is not permitted. See long text ( BRAINOLAPAPI 139 )
The request for properties is not permitted. See long text ( BRAINOLAPAPI 140 )
You may not use more than one hierarchy per dimension ( BRAINOLAPAPI 142 )
Transaction (name &1) not found ( BRAINOLAPAPI 145 )
The XML document for the MDX statement is invalid ( BRAINOLAPAPI 146 )
Error while reading the OLAP data. See long text. ( BRAINOLAPAPI 151 )
Destination &1 is a unicode RFC destination. See long text. ( BRAINOLAPAPI 152 )
Variable &2 cannot be calculated using &1 before aggregation ( BRAIN_DEV 001 )
Calculation before aggregation is not possible ( BRAIN_DEV 006 )
Cell &1 cannot be calculated. Filter not part of a time interval. ( BRAIN_DEV 007 )
Consistency of time dimension on InfoProvider &1 cannot be checked ( BRAIN_DEV 008 )
Time dimension on InfoProvider &1 is inconsistent ( BRAIN_DEV 009 )
Characteristics can't be added to queries on providers supporting input ( BRAIN_DEV 010 )
Characteristics can't be added to queries with non-cumulative key figures ( BRAIN_DEV 011 )
Add. virtual key figures cannot be defined when adding characteristics ( BRAIN_DEV 012 )
An untreatable error has occurred. You need to restart the process. ( BRAIN_DEV 022 )
Variable &1 cannot process compound values ( BRAIN_DEV 025 )
Cache in database cannot be used ( BRAIN_DEV 027 )
Element &4: Stock coverage not compatible with free characteristic &1 ( BRAIN_DEV 029 )
Row (&1) in formula "&2" uses an operator that is not supported ( BRAIN_DEV 031 )
The condition applied (&1) does not return a unique result ( BRAIN_DEV 032 )
Input-enabledness of "&1" has been reset ( BRAIN_DEV 033 )
No exception aggregation in HANA/BWA because of free char. currency/unit ( BRAIN_DEV 034 )
Operator '&1' in formula '&3(&2)' is only allowed with constant arguments ( BRAIN_DEV 035 )
Query has been changed and generated after current session was started ( BRAIN_DEV 036 )
Session metadata of InfoProvider for input-enabled query is too old ( BRAIN_DEV 037 )
Exc. aggr. ref. characteristic &1 of &2 is not a total time char. ( BRAIN_DEV 038 )
Cache in database restricted to the application server ( BRAIN_DEV 039 )
Element &4: Stock coverage not compatible with selection char. &1 ( BRAIN_DEV 046 )
Element &4: Stock coverage not compatible with mandatory char. &1 ( BRAIN_DEV 047 )
Characteristic &1 cannot be added due to incompatibility with element &3 ( BRAIN_DEV 048 )
Characteristic &1 cannot be added due to incompatibility with element &3 ( BRAIN_DEV 049 )
Element &3: CURRENT MEMBER not compatible with free characteristic &1 ( BRAIN_DEV 050 )
Element &4: CURRENT MEMBER not compatible with mandatory char. &1 ( BRAIN_DEV 051 )
Element &3: CURRENT MEMBER not compatible with selection char. &1 ( BRAIN_DEV 052 )
Consistency of time dimension on InfoProvider &1 cannot be checked ( BRAIN_DEV 053 )
Time dimension on InfoProvider &1 is inconsistent ( BRAIN_DEV 054 )
Element &1: CURRENT MEMBER and stock coverage need same reference ( BRAIN_DEV 055 )
Element &1: Stock coverage does not allow interval with CURRENT MEMBER ( BRAIN_DEV 056 )
Time characteristic '&1' must be assigned identically for '&2' ( BRAIN_DEV 057 )
Time characteristic '&1' must be assigned identically for '&2' ( BRAIN_DEV 058 )
CKF &1 does not redefine exception aggr. of stock coverage key figure &2 ( BRAIN_DEV 062 )
Query uses audit characteristic '&1'; entry not possible ( BRAIN_DEV 063 )
Cannot input &1; &2 is a stock coverage key figure ( BRAIN_DEV 064 )
Key figure "&1" uses generic aggregation "&2". Only "SUM" is supported. ( BRAIN_DEV 065 )
Exception aggr. in SAP HANA/BWA and calculation without high precision ( BRAIN_DEV 066 )
Time characteristic &1 of stock coverage key fig. &2 not in InfoProv &3 ( BRAIN_DEV 067 )
FIX operator in formula "&2" (&1) requires an exception aggregation ( BRAIN_DEV 070 )
Element &1: Unique value for fiscal variant needed in global filter ( BRAIN_DEV 073 )
Element &1: "Constant Selection" on CURRENT MEMBER variable not possible ( BRAIN_DEV 076 )
Characteristic value "&1" of &2 not available in master data ( BRAIN_DEV 079 )
Cache mode of partition '&1' (XWGR: 0x&2) changed from '&3' to '&4' ( BRAIN_DEV 081 )
Cache inactive for Provider &1. Cache usage mode for &1 reset to default ( BRAIN_DEV 083 )
Cache is inactive for provider &1. Read mode 'All' impairs performance. ( BRAIN_DEV 084 )
Data integrity of Provider &1 not possible with cache usage mode ( BRAIN_DEV 086 )
Switching off cache usage temporarily resets the data integrity scenario ( BRAIN_DEV 088 )
Define a technical name for structure element &1 of structure &2 ( BRAIN_DEV 089 )
Settings for &1 reset. See long text. ( BRAIN_DEV 090 )
Element &1 &2 cannot be used in formulas. See long text. ( BRAIN_DEV 091 )
Text variable &1 in "&3" cannot be replaced - no selection ( BRAIN_DEV 092 )
Element &1: CURRENT MEMBER variable not allowed for &2 ( BRAIN_DEV 093 )
Simple linear regression with reference char. &1 cannot be calculated ( BRAIN_DEV 094 )
&1: multiple exception aggregation reference characteristics not allowed ( BRAIN_DEV 095 )
&1: multiple exception aggregation reference characteristics not allowed ( BRAIN_DEV 096 )
&1: "Exclude All from Reference characteristics" not allowed ( BRAIN_DEV 097 )
&1: "Exclude All from Reference characteristics" not allowed ( BRAIN_DEV 098 )
&1: exception aggregation ref. characteristic has incorrect data type ( BRAIN_DEV 099 )
&1: exception aggregation ref. characteristic has incorrect data type ( BRAIN_DEV 100 )
Unit conversion '&1' not applied for stock coverage key figure '&2' ( BRAIN_DEV 101 )
&1: Internal business volume elimination and exception aggregation on &3 ( BRAIN_DEV 103 )
Element &1 uses quantity conversion type &2 (source unit from attribute) ( BRAIN_DEV 105 )
Artificial characteristic "Currency/Unit" (1CUDIM) is used ( BRAIN_DEV 106 )
Artificial characteristic "Currency/Unit" (1CUDIM) cannot be added ( BRAIN_DEV 107 )
No indexes are created for tables in SAP HANA systems ( BRAIN_DEV 108 )
&1 cannot be input-ready. See long text. ( BRAIN_DEV 111 )
&1 cannot be input-ready. See long text. ( BRAIN_DEV 112 )
Navigation attribute &1 mapping does not match with mapping of &2 ( BRAIN_DEV 113 )
Formula after explicit currency/unit handling is not supported ( BRAIN_DEV 116 )
Formula "&2" (&1) requires at least one operand without FIX operator ( BRAIN_DEV 117 )
Variable (replacement path) and currency/unit handling not supported ( BRAIN_DEV 118 )
Intersection of fixed validity and fixed time filters empty for CSID &1 ( BRAIN_DEV 131 )
Intersection of fixed time filters is empty for CSID &1 ( BRAIN_DEV 132 )
Intersection of dynamic validity with filters is empty for CSID &1. ( BRAIN_DEV 133 )
Intersection of dyn time filter with fixed filter/val is empty. CSID &1. ( BRAIN_DEV 134 )
Too much data requested; Add filter or remove drilldown characteristic. ( BRAIN_DEV 135 )
The formula "&1"(&2) contains different exception aggregations: &3, &4 ( BRAIN_DEV 136 )
&1: exception aggregation ref. characteristic is compounded ( BRAIN_DEV 137 )
&1: exception aggregation ref. characteristic is compounded ( BRAIN_DEV 138 )
Formula &1 with variable &2 cannot be calculated before aggregation ( BRAIN_DEV 141 )
Class has been released. FREE method will be called by: '&1' '&2' '&3'. ( BRAIN_DEV 142 )
Element &1: Incorrect use of CURRENT MEMBER variable. Reason: &2. ( BRAIN_DEV 143 )
Setting &1 is not allowed for this query. ( BRAIN_DEV 147 )
Setting &1 is not allowed due to a dependency on setting &2. ( BRAIN_DEV 148 )
Setting &1 can't be changed for this query. ( BRAIN_DEV 151 )
The cache will be used despite virtual characteristics / key figures ( BRAIN_DEV 152 )
Element &1 should not use the 'Data Extension' setting ( BRAIN_DEV 153 )
Data integrity scenario 'G Guaranteed Stable Data' reduced to 'S' ( BRAIN_DEV 154 )
Data integrity has been adapted from &3 to &1 because of profile &2. ( BRAIN_DEV 201 )
Ambiguities for key figure &1 cannot be resolved. Remodelling required. ( BRAIN_DEV 300 )
Value '&2' is not valid for variable &1 or does not exist ( BRAIN_DEV 627 )
Value '&3' is not valid for variable &2 ( BRAIN_DEV 644 )
Query contains non-cumulative key figures and incompatible formulas ( BRAIN_DEV 645 )
MultiProvider with compounding problem - no exception aggregation in HANA ( BRAIN_DEV 646 )
No PartProvider with HANA persistency - no exeption aggregation in HANA ( BRAIN_DEV 647 )
Formula &1 &2 contains discontinued feature formula before aggregation ( BRAIN_DEV 649 )
No exception aggr in HANA/BWA: mandatory char. with high cardinality ( BRAIN_DEV 651 )
Number of elements in structure &2 exceeds limit &1 ( BRAIN_DEV 652 )
Number of helper elements in structure &2 exceeds limit &1 ( BRAIN_DEV 653 )
Total number of structure element combinations exceeds allowed limit ( BRAIN_DEV 654 )
FIRST/LAST with non-convex time filters can produce unexpected results ( BRAIN_DEV 655 )
Virtual key figure &1 depends on non-matching key figure &2 ( BRAIN_DEV 656 )
InfoProvider fill states have been auto-refreshed ( BRAIN_DEV 657 )
&1 is marked as cell-unique, but it is missing/not unique in drilldown ( BRAIN_DEV 659 )
Duplicate technical name (mapname) &1 exists in &2 and &3. ( BRAIN_DEV 700 )
&2 &3 cannot be generated. Wrong COMPTYPE: '&1'. ( BRAIN_SUP 001 )
Compound parent &1 is not in the MultiProvider ( BRAIN_SUP 010 )
Variable &1[&2] cannot be replaced from variable &3[&4] ( BRAIN_SUP 014 )
You want to replace variable &1[&2] from &3[&4], but &2 is a node var. ( BRAIN_SUP 015 )
Selection variable &1[&2] cannot be replaced from &3[&4] ( BRAIN_SUP 016 )
Range variable &1[&2] cannot be replaced from &3[&4] ( BRAIN_SUP 017 )
Variable &1[&2] cannot be replaced from &3[&4] ( BRAIN_SUP 018 )
Variable &1[&2] must not be input ready ( BRAIN_SUP 019 )
Variable &1[&2] cannot be replaced from &3[&4] ( BRAIN_SUP 020 )
Variable &1[&2] cannot be replaced from &3[&4] ( BRAIN_SUP 021 )
Variable &1 cannot be replaced from &2 ( BRAIN_SUP 022 )
The default value for variable &1[&2] must not be '#' ( BRAIN_SUP 023 )
&1 cannot be changed. USER_EXIT_MODE set to '1'. ( BRAIN_SUP 026 )
Characteristic identification added for &1 and PartProvider &2 ( BRAIN_SUP 027 )
Characteristic identification not possible for &1 and PartProvider &2 ( BRAIN_SUP 028 )
Add time characteristic &1 to PartProvider &2 ( BRAIN_SUP 029 )
Query &1 does not exist ( BRAIN_SUP 033 )
Default query for InfoProvider &1 could not be generated uniquely ( BRAIN_SUP 035 )
Exception aggregation &1 not applicable in context of aggregation &2 ( BRAIN_SUP 037 )
You cannot use the same dimension on different axes ( BRAIN_SUP 040 )
Action not possible; switch to the technical view ( BRF 024 )
First enter a result type ( BRF 025 )
You are not permitted to use result type &1 to build formulas ( BRF 026 )
Correct the dependent tables ( BRF 027 )
Class &1 does not exist ( BRF 130 )
General error in data source &1 - &2 ( BRF 134 )
Operand category and operator are not compatible "&1 &2 &3" ( BRF 152 )
Expression &1: No access module found for structure/table &2 ( BRF 180 )
First create application class &1 cross-client ( BRF 216 )
Decision expression &1 cannot be evaluated in RANGE &2 ( BRF 231 )
No uniform result typing is possible ( BRF 254 )
No errors found ( BRF 262 )
No errors found, but dependent tables will be changed ( BRF 263 )
You have not specified any WHERE condition ( BRF 267 )
The short text does not have any first message variable ( BRF 271 )
The short text does not have any second message variable ( BRF 272 )
The short text does not have any third message variable ( BRF 273 )
The short text does not have any fourth message variable ( BRF 274 )
Object group '&1' does not exist ( BRF 279 )
The short text requires a first message variable ( BRF 281 )
The short text needs a second message variable ( BRF 282 )
The short text needs a third message variable ( BRF 283 )
The short text needs a fourth message variable ( BRF 284 )
Too many decimal places: &1 - max. &2 decimal places possible ( BRF 285 )
You are still using the "old" context. Switch to new one as soon as poss. ( BRF 293 )
Use the new BRF context concept ( BRF 297 )
Structure/table &1 does not exist ( BRF 303 )
Field &1 does not belong to structure/table &2 ( BRF 304 )
Expression for &1-&2 (&3) already exists ( BRF 349 )
Variable for "&1" is missing in task text ( BRF 354 )
No data source exists for structure/table &1 ( BRF 379 )
Error in tree structure in TBRF230 - Node could not be added ( BRF 407 )
F4 input help is not available for literals ( BRF 409 )
You are not permitted to output multiple identical messages ( BRF 412 )
Deletion of object &1 is not possible; object is still being used ( BRF 414 )
Enter a valid name/description ( BRF 434 )
Parameter &1 is missing in function module &2 - see template &3 ( BRF 436 )
The result type of expression &1 must be Boolean ( BRF 446 )
Specify a reference expression (result type R) ( BRF 458 )
Calculation of object &1 not possible; object contains errors ( BRF 493 )
Operation &2 is not permitted for result type of &1 (&3) ( BRF 498 )
WHEN value is not unique ( BRF 508 )
Node &1 must not contain a condition ( BRF 535 )
Remove the condition in node &1 ( BRF 536 )
&1: Subexpression &2 is not part of the dependent objects ( BRF 543 )
System unable to repair expression &1 (&2) automatically ( BRF 548 )
Incorrect result typing of CASE expression &1 ( BRF 562 )
System unable to interpret WHEN value '&1' as a figure ( BRF 563 )
WHEN value '&1' produces an overflow ( BRF 564 )
BRF expression '&1' cannot be calculated ( BRF 565 )
BRF expression '&1' cannot be calculated ( BRF 566 )
BRF expression '&1' cannot be calculated ( BRF 567 )
Subexpression &2 used with expression &1 is buffered ( BRF 577 )
Maximum length of &1 is exceeded ( BRF 578 )
BRF is obsolete and works in S/4HANA with restrictions ( BRF 583 )
Generation for table &1 deactivated; transport class is missing ( BRF 610 )
Missing conversion class for &1 ( BRF 652 )
System unable to convert expression &1 automatically ( BRF 656 )
System unable to interpret parts of the expression '&1' ( BRF 658 )
It is not possible to convert the expression with result type '&1' ( BRF 670 )
Dependent object types have been marked ( BRF 675 )
Assignment of BRF rule &1 is not possible ( BRF 676 )
Migration of object "&1(&2)" not possible; object contains errors ( BRFMIG 001 )
Migration of expression &1 with result type "&2" is not possible ( BRFMIG 002 )
System unable to determine the namespace for object &1 (&2) ( BRFMIG 014 )
Function &1 and rule set function &2 of rule &3 do not match ( BRFMIG 021 )
Structure/table definition for DDIC object &1 is missing ( BRFMIG 030 )
Error during migration of object with category &1; category conflict ( BRFMIG 032 )
Conversion of BRFplus expression &1 not possible; result not elementary ( BRFMIG 042 )
Creation of a data object for field &1 with category &2 is not possible ( BRFMIG 047 )
Use of BRFplus application &1 is not possible ( BRFMIG 056 )
Migration of object &1 is not possible for technical reasons ( BRFMIG 070 )
The parameter is a BOR object and cannot be changed ( BRF_FDT_WD 100 )
Selected object has already been expanded ( BROWSER 000 )
Selected object cannot be expanded any further ( BROWSER 001 )
No statuses found for document type &1 ( BROWSER 002 )
Select an object ( BROWSER 003 )
You cannot delete the first tree ( BROWSER 006 )
Filter &1 is already locked by &2 ( BROWSER 011 )
System locking error occurred ( BROWSER 012 )
You cannot delete filter &1 ( BROWSER 014 )
Filter &1 is incomplete ( BROWSER 016 )
You cannot change filter &1 ( BROWSER 017 )
Object excluded by filter &1 ( BROWSER 018 )
Connection to system &1 could not be established ( BROWSER 019 )
A system error occurred in system &1 ( BROWSER 020 )
Private filter & is still in use by & -> deletion not possible ( BROWSER 100 )
No status object exists for & ( BS 001 )
"&" is not allowed (& &) ( BS 002 )
Warning: '&' (&) ( BS 003 )
Process & is not supported (&) ( BS 005 )
"&" is not allowed (&) ( BS 006 )
"&" is not allowed (&) ( BS 007 )
Status profile & does not exist ( BS 008 )
System status & does not exist ( BS 009 )
User status & does not exist in status profile & ( BS 010 )
System status & is active (&) ( BS 011 )
User status & is active (&) ( BS 012 )
System status & is active (&) ( BS 013 )
User status & is active (&) ( BS 014 )
Business transaction & not allowed for object type & ( BS 015 )
Status is inconsistent (&) ( BS 016 )
Status object & already exists ( BS 017 )
Object type & is not supported ( BS 018 )
Object type & cannot have a status profile ( BS 019 )
Status profile & is not allowed for "&" ( BS 020 )
Old object number is not temporary ( BS 021 )
New object number is temporary ( BS 022 )
User status & is not allowed (&) ( BS 023 )
Status for object type & is maintained externally ( BS 024 )
Status is inconsistent (&) ( BS 025 )
Old and new object numbers are incompatible ( BS 026 )
"&" is not allowed (&) ( BS 027 )
System status & is not allowed (&) ( BS 028 )
Status & is not a system status (&) ( BS 029 )
& has no user status ( BS 030 )
Cannot delete status & (&) ( BS 032 )
This function is only allowed for user status ( BS 034 )
Object type & is not supported for object type & ( BS 035 )
User status & must not be deleted ( BS 036 )
Maximum number of system statuses exceeded (&) ( BS 037 )
Maximum number of user statuses exceeded (&) ( BS 038 )
No authorization for activating user status & ( BS 039 )
No authorization for deleting user status & ( BS 040 )
Status & has no text assignment ( BS 041 )
Status & is not allowed (&) ( BS 042 )
Status & is not allowed (&) ( BS 043 )
Status profile & does not exist ( BS 044 )
Status selection profile & does not exist ( BS 045 )
Status management: Status number not unique (&) ( BS 046 )
Write change document is not active for object &. ( BS 047 )
"&" not allowed (&, object &) ( BS 051 )
Status object not assigned to status profile ( BS 056 )
User status & does not exist ( BS 057 )
No authorization for activating user status & ( BS 059 )
No authorization for deleting user status & ( BS 060 )
Status profile & already exists ( BS 203 )
Status & already exists ( BS 205 )
No further statuses can be created ( BS 206 )
New entries can be created ( BS 207 )
Specify a status ID ( BS 208 )
Data not changed ( BS 210 )
First translate user status to & language ( BS 211 )
User status & already active ( BS 212 )
First define allowed object types ( BS 218 )
No further entries can be made ( BS 229 )
Status & is used in business transaction control ( BS 230 )
Specify an object type ( BS 232 )
Define status administration processes first ( BS 234 )
Define allowed statuses first ( BS 236 )
Translation to & language not complete ( BS 237 )
Foreign language and maintenance language must be different ( BS 238 )
Foreign language and logon language must be different ( BS 239 )
Object type & already exists ( BS 240 )
User & already working on data ( BS 241 )
System error in lock management ( BS 242 )
Statuses & and & are initial statuses ( BS 246 )
You are not authorized to maintain status profiles ( BS 247 )
You are not authorized to display status profiles ( BS 248 )
System status & is not supported ( BS 249 )
Process & is still used in T022 ( BS 250 )
The business transaction cannot start with 'Z' ( BS 251 )
Business transaction & is not allowed for status administration ( BS 253 )
Business transaction & is still used in status administration ( BS 254 )
Statuses & and & have the same position and priority ( BS 255 )
Specify/remove the position and priority ( BS 256 )
Business transaction & is not used ( BS 258 )
System status & is not used ( BS 259 )
Object type & has no default status or allowed business transactions ( BS 260 )
Status profile & has not been maintained ( BS 261 )
Specify a status number ( BS 262 )
Business transaction & already exists ( BS 264 )
Statusus & and & have the same status number ( BS 265 )
Specify the lowest and highest status numbers ( BS 267 )
The lowest status number is greater than the status reference number ( BS 268 )
The highest status number is less than the status reference number ( BS 269 )
Specify a status reference number ( BS 270 )
Status & still influencing business transactions ( BS 271 )
Status & is not a display status ( BS 272 )
User status & is not supported ( BS 273 )
You are not authorized to maintain & ( BS 274 )
You are not authorized to display & ( BS 275 )
This table is maintained by SAP ( BS 276 )
Status & is marked as initial status ( BS 288 )
Status & is deleted by business transaction & ( BS 289 )
Status cannot disallow business transaction which it is deleted by. ( BS 290 )
Status &1 still influenced by business transaction &2 ( BS 291 )
Business transaction '&' sets status '&' and '&' ( BS 292 )
"&" could not be deleted (object locked). ( BS 293 )
"&" could not be saved (object locked). ( BS 294 )
"&" cannot be created (object locked). ( BS 295 )
Internal error ( BS 299 )
The system status cannot be deleted ( BS 305 )
No user status for direct input available ( BS 311 )
Enter an authorization key ( BS 401 )
Archive not opened for deletion (Handle &) ( BS 501 )
Archive not opened for reloading (Handle &) ( BS 502 )
Status object for object number & exists ( BS 503 )
Archive not opened for writing (handle &) ( BS 504 )
Archive not opened for reading (handle &) ( BS 505 )
The system has tried to read all status objects. ( BS 506 )
No client specified ( BS 507 )
Object number & does not exist ( BS 601 )
No status or business transaction selected. ( BS 602 )
Business transaction & is not allowed for object type & (object no. &). ( BS 603 )
Internal status management error. ( BS 607 )
The object is not yet assigned to a status profile. ( BS 608 )
Status &2 is not known in language &3 in status profile &1. ( BS 609 )
Status with status number cannot be deleted. ( BS 610 )
UPDATE_JEST:PROGRAM_ERROR OBJNR: & STATUS: & INACT: & ( BS 700 )
UPDATE_JEST:STATUS_INCONSISTENT: OBJNR: & STATUS: & ( BS 701 )
UPDATE_JCDS:PROGRAM_ERROR OBJNR: & STATUS: & INACT: & ( BS 702 )
UPDATE_JCDS:STATUS_INCONSISTENT: OBJNR: & STATUS: & ( BS 703 )
You cannot change the status profile for '&2' to '&1' ( BS 802 )
System &1 does not support all remote BI Content functionality ( BSANLY_CONT_ACT_MSG 010 )
A previous activation process is still running ( BSANLY_CONT_ACT_MSG 015 )
Local BW RFC connection not defined ( BSANLY_CONT_ACT_MSG 020 )
Missing authorization for BI Content activation workbench ( BSANLY_CONT_ACT_MSG 030 )
Data saved only locally ( BSANLY_CONT_ACT_MSG 033 )
Mismatch of master language &1 and current language ( BSANLY_CONT_ACT_MSG 039 )
Logical system &1 is no source system for RFC connection &2 ( BSANLY_CONT_ACT_MSG 040 )
BI Content bundle cannot be expanded ( BSANLY_CONT_ACT_MSG 042 )
Format error in file &1 at line &2 ( BSANLY_CONT_ACT_MSG 050 )
Implement BAdI in the target system ( BSANLY_CONT_ACT_MSG 058 )
Check log of BI Content bundle &2 ( BSANLY_CONT_ACT_MSG 059 )
Bundle &1 belongs to a different package than surrounding bundle &3 ( BSANLY_CONT_ACT_MSG 065 )
Different BAdIs defined for bundle &1 and &3 in source system ( BSANLY_CONT_ACT_MSG 066 )
Different BAdIs defined for bundle &1 and &3 in local BI system ( BSANLY_CONT_ACT_MSG 067 )
Different BAdIs defined for bundle &1 and &3 in remote BI system ( BSANLY_CONT_ACT_MSG 068 )
Bundle &1 has status '&2' ( BSANLY_CONT_ACT_MSG 076 )
Software component &2 not available in target system &3 ( BSANLY_CONT_ACT_MSG 086 )
Patch level not sufficient in target system &4 ( BSANLY_CONT_ACT_MSG 087 )
System &1 supports only installation of all objects ( BSANLY_CONT_ACT_MSG 088 )
The Business Function &1 can only be activated if a HANA DB is available ( BSCBN_CMN_MSG 002 )
Name of class or object type &1 &2 contains invalid characters ( BSCL 026 )
List ID &1 contains invalid letters ( BSCL 033 )
The Business Function &1 can only be activated if a HANA DB is available ( BSESH_SAPAPPLH_MSG 002 )
The Business Function &1 can only be activated if a HANA DB is available ( BSESH_SBSFNDH_BF_MSG 002 )
It is not possible to change older versions ( BSFC 012 )
This question is already in use at a higher level ( BSFC 017 )
This question only has one answer ( BSFC 030 )
Maximum column width was exceeded (current sum is &1%) ( BSP_DLC_TOOLS 038 )
Check assignment of this view to a window in the runtime repository ( BSP_DLC_TOOLS 068 )
The configuration language (&1) does not match the login language (&2) ( BSP_DLC_TOOLS2 072 )
Attribute &1 does not exist in BOL object &2 (design object &3) ( BSP_DYN_MSG_DESIGN 002 )
BOL object &1 does not exist (design object &2, parent BOL object &3) ( BSP_DYN_MSG_DESIGN 015 )
Attribute &1 of design object &2 is different from BOL attribute &3 ( BSP_DYN_MSG_DESIGN 016 )
UI object type &1 already exists as generic UI object type ( BSP_DYN_MSG_DESIGN 018 )
Information for reference design object in design object &1 is incomplete ( BSP_DYN_MSG_DESIGN 019 )
Design obj. &1 and ref. design obj. &2 use different genIL components ( BSP_DYN_MSG_DESIGN 020 )
BOL objects of design obj. &1 and ref. design obj. &2 are not identical ( BSP_DYN_MSG_DESIGN 021 )
Use customer namespace "WRAPPED_" + (X,Y,Z) for wrapped BOR object types ( BSP_DYN_MSG_DESIGN 026 )
Assignment block &1 (&2) is no longer available in configuration ( BSP_DYN_PERS_CHECK 000 )
Assignment block &1 (&2) is missing in personalization ( BSP_DYN_PERS_CHECK 003 )
Table column &1 (&2) is no longer available in configuration ( BSP_DYN_PERS_CHECK 004 )
Table column &1 (&2) is missing in personalization ( BSP_DYN_PERS_CHECK 005 )
Assignment block &1 (&2) has been removed from personalization ( BSP_DYN_PERS_CHECK 006 )
Table column &1 (&2) has been removed from personalization ( BSP_DYN_PERS_CHECK 007 )
Assignment block &1 (&2) has been added to personalization ( BSP_DYN_PERS_CHECK 008 )
Table column &1 (&2) has been added to personalization ( BSP_DYN_PERS_CHECK 009 )
Redefinition of method CONNECT_NODES() is missing in class &1 ( BSP_WD 000 )
An exception has occurred during program processing ( BSP_WD 005 )
Required entry fields not filled; click here to continue anyway ( BSP_WD 007 )
You do not have authorization for debugging ( BSP_WD 015 )
Expression '&1' with wildcard '*' is invalid here: Check search criterion ( BSP_WD 020 )
A configuration of view &1 appears to contain obsolete fields ( BSP_WD 021 )
Redefinition of method GET_MAIN_ENTITY is missing in controller class &1 ( BSP_WD 028 )
Application '&1' does not offer BOL object to embed into ( BSP_WD 029 )
Cannot paste (&1) criteria. Entries truncated to pasting maximum of (&2). ( BSP_WD 103 )
&1 &2 exists only in SAP repository ( BSP_WD_CC 020 )
&1 &2 exists only in enhanced repository ( BSP_WD_CC 021 )
Interface element &1 is not allowed for component &2 ( BSP_WD_CUST 005 )
Context class in &1 cannot be replaced ( BSP_WD_TOOLS 032 )
Error while loading the runtime repository via HTTP ( BSP_WD_TOOLS 033 )
Controller class &1 is cannot be extended ( BSP_WD_TOOLS 041 )
Context class & cannot be extended ( BSP_WD_TOOLS 042 )
Context node class &1 cannot be extended ( BSP_WD_TOOLS 043 )
BSP application &1 is not startable ( BSP_WD_TOOLS 048 )
Could not determine BOL object for context node &1 ( BSP_WD_TOOLS 075 )
Enhancement of component &1 is not empty and cannot be deleted ( BSP_WD_TOOLS 089 )
Enhancement set &1 contains component enhancements and cannot be deleted ( BSP_WD_TOOLS 092 )
Context cannot be enhanced ( BSP_WD_TOOLS 094 )
Only attribute methods were created; context node is bound ( BSP_WD_TOOLS 095 )
Not possible to lock runtime repository ( BSP_WD_TOOLS 216 )
Source view '&2' in navigational link '&1' is not assigned ( BSP_WD_TOOLS 223 )
Target view '&3' in navigational link '&2' is not assigned ( BSP_WD_TOOLS 224 )
Multiple usage of view '&' is not allowed ( BSP_WD_TOOLS 225 )
No inconsistencies found ( BSP_WD_TOOLS 229 )
Window name &1 does not have a prefix ( BSP_WD_TOOLS 230 )
Embedded view '&1' is invalid ( BSP_WD_TOOLS 232 )
Interface view ID '&1' of usage '&2' ends with a space ( BSP_WD_TOOLS 236 )
BSP application &1 for enhanced objects does not exist or is not active ( BSP_WD_TOOLS 240 )
Context node &1 not available in view enhancement ( BSP_WD_TOOLS 350 )
Attribute &2 of context node &1 not available in view enhancement ( BSP_WD_TOOLS 351 )
Page attributes of view enhancement do not contain context node &1 ( BSP_WD_TOOLS 354 )
Page attribute &1 not available in view enhancement ( BSP_WD_TOOLS 355 )
Are you sure that you want to convert this context node to a mixed node? ( BSP_WD_TOOLS 356 )
The entries are not completely converted ( BSP_XSRF 011 )
BSP application &1 could not be locked ( BSP_XSRF 014 )
BSP application &1: Inconsistent meta-entries ( BSP_XSRF 015 )
BSP application &1: The temporary entries are no longer available ( BSP_XSRF 016 )
BSP application &1: Temporary entries cannot be deleted ( BSP_XSRF 017 )
BSP application &1: Security flag could not be set ( BSP_XSRF 018 )
BSP application &1, page &2: Could not set flag for home page ( BSP_XSRF 019 )
BSP application &1: Temporary entries were deleted ( BSP_XSRF 020 )
BSP application &1 is not available ( BSP_XSRF 021 )
BSP application &1: inconsistent information about security relevance ( BSP_XSRF 022 )
BSP application &1, page &2: page is no longer available ( BSP_XSRF 024 )
The attachment cannot be replaced ( BSSP1 004 )
The attachment cannot be deleted ( BSSP1 005 )
The e-mail could not be sent ( BSSP1 010 )
The e-mail outbox could not be opened ( BSSP1 013 )
A private note exists already ( BSSP1 022 )
Maximum number of 255 analysis paths per application exceeded ( BS_ANLY_APF 001 )
Maximum number of 32 analysis steps exceeded ( BS_ANLY_APF 004 )
Chart Customizing file &1 does not exist ( BS_ANLY_CHART 002 )
Enter a valid transport request ( BS_ANLY_CHART 004 )
The file &1 could not be saved ( BS_ANLY_CHART 006 )
The chart Customizing file &1 is not correctly defined ( BS_ANLY_CHART 013 )
The display type separator cannot be assigned to the action &1 ( BS_ANLY_CHART 015 )
The action &1 is not defined in the feeder class ( BS_ANLY_CHART 018 )
The selected elements cannot be moved ( BS_ANLY_CHART 022 )
The display type button choice cannot be assigned to the action &1 ( BS_ANLY_CHART 030 )
Cannot create new lines for this query ( BS_ANLY_LIST 001 )
Parametrized call with role &1 and instance &2 ( BS_ANLY_LIST 009 )
No active version of query &1 exists ( BS_ANLY_LIST 011 )
Data type of attribute is invalid ( BS_ANLY_LIST 012 )
Variable &1 &2 cannot be displayed for manual input ( BS_ANLY_LIST 013 )
Query &1 cannot be displayed in the hierarchical list ( BS_ANLY_LIST 020 )
Structure &1 cannot be removed from drilldown, action was not executed ( BS_ANLY_LIST 021 )
Column &1 has been removed from the list ( BS_ANLY_LIST 022 )
Chart type is not allowed ( BS_ANLY_LIST 025 )
Check update to input fields ( BS_ANLY_OIP_MODELING 007 )
Authorization class required for BIA-enabled InfoSet ( BS_ANLY_OIP_MODELING 008 )
Set at least one field as authorization-relevant ( BS_ANLY_OIP_MODELING 009 )
Only single values are allowed for &1 ( BS_ANLY_OP_BIA 001 )
InfoSet &1 cannot be chosen ( BS_ANLY_OP_BIA 002 )
Characteristic &1 cannot be chosen ( BS_ANLY_OP_BIA 003 )
Immutable node selected as target ( BS_CC_MESSAGES 001 )
Cleansing process cannot be started ( BS_CC_MESSAGES 008 )
&1 '&2' is already assigned ( BS_CC_MESSAGES 009 )
Maintenance of flexible checkbox might be disabled after save ( BS_PERIOD 023 )
Maintenance of flexible checkbox will be disabled after save ( BS_PERIOD 024 )
System's Factory Calendar &1 ends on &2. Requested Date is &3. ( BS_PERIOD 047 )
Frequency Type &1 does not fit to Frequency Map Type &2 ( BS_PERIOD 048 )
Attribute & is not supported ( BS_SOA_COMMON 000 )
Switch &1 is switched off in client &2 ( BS_SOA_COMMON 050 )
A message is missing for sequencing object &1 and context &2 ( BS_SOA_COMMON 060 )
bgRFC is not configured yet. Execute report RBS_SOA_IAS_SETUP_BGRFC. ( BS_SOA_COMMON 071 )
No message category group assigned to proxy class &1, proxy method &2 ( BS_SOA_ERR_CAT 001 )
Cannot find element &1 in structure of parameter &2 ( BS_SOA_ERR_CAT 009 )
Element &1 of parameter &2 does not have the appropriate type &3 ( BS_SOA_ERR_CAT 010 )
Error during RFC call: &1 ( BS_SOA_SIW_TMPL 002 )
Configuration valid for synchronous inbound services only ( BS_SOA_SIW_TMPL 003 )
& service requests not yet confirmed ( BS_SSC_SR 019 )
& entries deleted ( BS_SSC_SR 020 )
& entries would be deleted ( BS_SSC_SR 021 )
CRM Service Request UI being launched in a browser ( BS_SSC_SR 023 )
End balance &1 is not correct ( BS_UPLOAD 019 )
Specify a start time ( BT 001 )
Job & does not exist or does not have matching status. ( BT 004 )
Specify a complete start time ( BT 005 )
Start date is in the past ( BT 006 )
Specify latest possible start time in full ( BT 007 )
Latest start time is earlier than start time ( BT 008 )
Start time and latest start time are more than one year apart ( BT 009 )
Choose an operation mode for the object ( BT 012 )
Select only one operation mode for the object ( BT 013 )
Choose a trace level ( BT 014 )
Choose only one trace level ( BT 015 )
Choose a trace activation type ( BT 016 )
Specify an object ID ( BT 022 )
This entry already exists ( BT 023 )
Error saving the new entry in database table BTCCTL ( BT 024 )
Variant & is invalid (see system log) ( BT 025 )
Failed to schedule job & (see system log) ( BT 026 )
Failed to create job step & (see system log) ( BT 027 )
Failed to execute job & (see system log) ( BT 028 )
This entry is no longer in table BTCCTL ( BT 029 )
Invalid object ID ( BT 030 )
Period values are not permitted when specifying a previous job ( BT 031 )
The control object editor was called with an invalid operation code (&) ( BT 035 )
No edit authorization exists ( BT 037 )
System event names must begin with the prefix 'SAP_' ( BT 039 )
The prefix 'SAP_' is only permitted for system events ( BT 040 )
Event & does not exist ( BT 042 )
Error saving the new event & in the database ( BT 043 )
Error reading the BTCCTL entry from an internal table ( BT 044 )
Failed to delete BTCCTL entry in internal table ( BT 052 )
Failed to delete BTCCTL entry in database ( BT 053 )
Failed to update BTCCTL entry in internal table ( BT 054 )
Failed to update BTCCTL entry in database ( BT 055 )
Error when updating event & in the database ( BT 057 )
Control objects are being edited by user & - only display is possible ( BT 060 )
The enqueue subsystem reports an internal error; see the system log ( BT 061 )
Event & locked by user & ( BT 062 )
You are not authorized to use transaction & ( BT 063 )
The step list editor was called with an invalid operation code (&) ( BT 064 )
Failed to read user print parameters ('GET_PRINT_PARAMETERS') ( BT 065 )
The specifications for the external program are incomplete ( BT 070 )
User & is unknown ( BT 071 )
Failed to read the selected variant from internal table ( BT 073 )
Program & is invalid or does not exist ( BT 074 )
Variant & is invalid ( BT 075 )
You must first define variants for program & ( BT 076 )
Program & cannot be scheduled (not of type 1 or J) ( BT 077 )
Program & has no variants ( BT 078 )
Variant check failed. See system log ( BT 080 )
Failed to update internal step list ( BT 081 )
Error reading step list entry from internal table ( BT 082 )
Failed to delete step in internal table ( BT 084 )
& was called with invalid operation code (&) ( BT 090 )
& was called with invalid dialog mode (&) ( BT 091 )
Unknown error (&) checking ABAP and variant ( BT 092 )
Specify a valid job class (A, B or C) ( BT 095 )
Invalid start date values ( BT 096 )
Define at least 1 step. A job is invalid without a step ( BT 097 )
Step & contains invalid data ( BT 098 )
Job & no longer has status 'Scheduled' and cannot be edited ( BT 101 )
You are not authorized to schedule report & for user & ( BT 102 )
User & cannot be scheduled for background processing (incorrect type) ( BT 103 )
Internal error during user confirmation prompt (notify SAP) ( BT 106 )
User & is not authorized to schedule program & as a background job ( BT 107 )
You are not authorized to release background jobs ( BT 108 )
Could not save job & to database; see system log ( BT 109 )
Job &/& is currently locked by user & ( BT 110 )
Error locking table & ( BT 111 )
Job & saved with status: & ( BT 112 )
Event table is locked; try again later ( BT 115 )
Error saving job & to database ( BT 117 )
Previous job & is no longer available ( BT 118 )
Error saving event for previous job & ( BT 119 )
Failed to save step values for job & ( BT 120 )
Previous job & is locked; try again later ( BT 121 )
Target host or target server & is not defined in an operation type ( BT 123 )
Error saving event data for job & ( BT 124 )
No delete authorization for job & ( BT 125 )
Failed to lock job & ( BT 126 )
Job & no longer exists ( BT 127 )
Job & is active. The selected function cannot be performed ( BT 128 )
Failed to delete steps for job & ( BT 129 )
Failed to delete log for job &1, count &2 ( BT 130 )
Failed to delete job & from the job scheduler timetable ( BT 131 )
Failed to delete job & from the job scheduler event table ( BT 132 )
Failed to lock previous job & ( BT 133 )
Failed to lock subsequent job & ( BT 134 )
Failed to cancel release of subsequent job & ( BT 135 )
Failed to delete job & from job definition table ( BT 136 )
Failed to update number of jobs before job & ( BT 137 )
Failed to update number of jobs after job & ( BT 138 )
No steps in database found for job & ( BT 139 )
You can only change your own jobs. ( BT 140 )
Job & cannot be modified due to its status ( BT 141 )
Parameter & is empty or has invalid contents ( BT 142 )
Error deleting release data in table & ( BT 143 )
Failed to change job status for job & in database ( BT 144 )
No job matches the selection criteria ( BT 145 )
& jobs have been deleted ( BT 146 )
Of the & jobs selected, & were not deleted ( BT 147 )
COMMIT WORK failed ( BT 148 )
Failed to generate job copy & ( BT 149 )
No job matches the selection criteria ( BT 151 )
The step list is empty; create at least one step ( BT 152 )
Failed to read job data from internal job list table ( BT 153 )
Failed to update job data in internal job list table ( BT 154 )
Error reading job data (job &) ( BT 155 )
Job & scheduled ( BT 156 )
Repeated scheduling of job & failed ( BT 157 )
Failed to save start date data for job & ( BT 158 )
Failed to delete job data in internal job list ( BT 161 )
Recordings for job & deleted ( BT 162 )
Select the end of the block first ( BT 163 )
You are not authorized to display job logs ( BT 164 )
Error determining the job log ( BT 165 )
No log entries exist for the selected job ( BT 166 )
Error reading job log & ( BT 167 )
Failed to read job log data from internal job log table ( BT 168 )
The job list processor was called with an invalid operation code (&) ( BT 169 )
Sources of external programs cannot be displayed ( BT 170 )
Documentation for external programs cannot be displayed ( BT 171 )
Variants for external programs cannot be displayed ( BT 172 )
Program & has no selection screen or variants ( BT 173 )
You are not authorized to display authorizations for user & ( BT 174 )
No list exists ( BT 175 )
Job & has no previous jobs ( BT 176 )
Job & has no subsequent jobs ( BT 177 )
Period values are only possible for jobs marked 'Periodic' ( BT 178 )
Job is event-periodic. Period values cannot be specified ( BT 180 )
Definition for job & is incomplete. Job cannot be released ( BT 181 )
Definition of job & is incomplete. Operation is not possible ( BT 182 )
The job list is empty ( BT 189 )
Choose a job ( BT 190 )
Forced mode: The preceding error will be ignored during deletion ( BT 191 )
You can only copy your own jobs ( BT 194 )
Status of job & is OK ( BT 245 )
Execute & again with permission & in dialog mode as user & ( BT 319 )
Execute & again in dialog mode as user & ( BT 320 )
No Logical SAP Commands found! ( BT 321 )
Specifications for the external command are incomplete ( BT 326 )
Error accessing the central system repository ( BT 344 )
Could not send spool list for step &1 due to error &2 ( BT 347 )
Print parameters of step &1 not restored due to error &2 ( BT 348 )
Spool number &1 has been reused in the meantime ( BT 350 )
<Could not convert message> ( BT 360 )
First date is later than second date ( BT 400 )
Incorrect line selection. No information available. ( BT 402 )
Enter a program name ( BT 404 )
Enter an external program ( BT 405 )
Job display from & & to & & ( BT 406 )
No SAP system is currently active on the specified computer ( BT 501 )
No SAP batch system is currently active on the specified computer ( BT 502 )
Unable to check the name of the target server ( BT 503 )
No target host for background processing is currently active ( BT 504 )
Unable to generate overview of currently active SAP servers ( BT 505 )
Failed to read step table ( BT 510 )
Job does not contain any steps ( BT 511 )
Job has print parameters with errors ( BT 512 )
Job has exceeded its latest start date ( BT 513 )
Previous job was not completed correctly ( BT 514 )
No free work process on host & for your job ( BT 516 )
All servers for background processing are currently in use ( BT 517 )
Unable to find date in calendar. (Is the calendar correct?) ( BT 518 )
Rescheduling of periodic job failed. Three reasons are possible: ( BT 519 )
Invalid start time displayed. Job chain ended. ( BT 522 )
- Period.job, scheduled for particular day in month, cannot find new date ( BT 523 )
Job & is not a standard job ( BT 532 )
Standard job with program & already exists ( BT 535 )
Job & is predefined ( BT 537 )
Unable to delete job definition & ( BT 538 )
Spool list recipient of job &1 can only be displayed in client &2 ( BT 545 )
Cannot display spool list recipient ( BT 546 )
Start the consistency check in dialog. ( BT 553 )
Maximum &1 lines sent from spool request &2 ( BT 554 )
Unable to determine the SAP system number ( BT 601 )
CPIC error & ( BT 602 )
Parameter & is empty or invalid (&) ( BT 603 )
Failed to receive external program protocol ( BT 604 )
Failed to start external program ( BT 605 )
Ext. prog.: &1&2&3&4 ( BT 606 )
Job finished ( BT 607 )
Status check: Job status was corrected from 'Active' to 'Canceled' ( BT 608 )
Failed to receive scheduling status of external program ( BT 609 )
The scheduling status of the external program is unclear ( BT 610 )
Step & started ( BT 611 )
External program: & ( BT 612 )
Related parameter: & ( BT 613 )
External program was canceled ( BT 614 )
You are copying jobs from client & into your client: & ( BT 648 )
Job cannot currently be started "Immediately" ( BT 655 )
Name of target server group & unknown ( BT 662 )
Target server group & is empty or does not contain a suitable server ( BT 664 )
& of & jobs were corrected; & jobs remain in status "Ready" ( BT 669 )
You are not authorized to schedule user & ( BT 680 )
Runtime information could be determined (& & & &) ( BT 803 )
Test for system exception ERROR_MESSAGE (message type: '&1') ( BT 804 )
System exception ERROR_MESSAGE was caught (correctly) ( BT 805 )
System exception ERROR_MESSAGE was not raised (not correct) ( BT 806 )
Another exception was raised (not correct) ( BT 807 )
Invalid PBT server group name: & ( BT 831 )
PBT environment was already initialized for group ( BT 833 )
No PBT resources available in system ( BT 834 )
Internal error in PBT function module & ( BT 835 )
All servers are busy: No resources available ( BT 837 )
PBT environment not yet initialized ( BT 838 )
All PBT resources are currently busy ( BT 856 )
Init. group & not possible as another group & is already init. ( BT 859 )
Printer not suitable for job step; automatic output not possible ( BT 864 )
This job is scheduled by a job definition (see long text) ( BT 891 )
Invalid concept ID ( BTFR_MESS 006 )
At least one of the newly created alias names exists in the new package ( BTFR_MESS 008 )
Enter an object type ( BTFR_MESS 100 )
No text was found that meets the selection criteria ( BTFR_MESS 102 )
The fuzzy search did not find any suitable texts ( BTFR_MESS 103 )
Text does not exist ( BTFR_MESS 116 )
The text belongs to object type &1 ( BTFR_MESS 119 )
The text belongs to package &1 ( BTFR_MESS 120 )
The text has the type &1 ( BTFR_MESS 121 )
A TADIR entry is created for the texts in package &1 ( BTFR_MESS 122 )
There is no TADIR entry for texts in package &1 in original system &2 ( BTFR_MESS 123 )
Error when checking TADIR entry (&1, RC = &2) ( BTFR_MESS 124 )
The package in the alias name does not correspond to current package &1 ( BTFR_MESS 125 )
Alias name abbreviated ( BTFR_MESS 126 )
The alias name contains the character '&1', which is not permitted ( BTFR_MESS 127 )
There are multiple concepts for the alias name &1 ( BTFR_MESS 132 )
The text length will be set to &1 ( BTFR_MESS 134 )
Texts are also used in other objects ( BTFR_MESS 141 )
Could not update at least one text ( BTFR_MESS 170 )
The concept &1 could not be updated ( BTFR_MESS 171 )
At least one text could not be deleted ( BTFR_MESS 172 )
Not all concepts could be deleted ( BTFR_MESS 173 )
Context has length &1; the original text however has length &2 ( BTFR_MESS 176 )
Text has length &1; though only &2 is allowed ( BTFR_MESS 177 )
The alias name has changed; change the calling positions too ( BTFR_MESS 180 )
The text will be displayed in secondary language &1 ( BTFR_MESS 182 )
The text will be displayed in the original language &1 ( BTFR_MESS 183 )
The fuzzy search is not active ( BTFR_MESS 600 )
Only texts from one language can be passed ( BTFR_MESS 609 )
No phase type assigned to solution ( BTP_DL 001 )
No execution plan variant assigned to solution ( BTP_DL 002 )
Non of the assigned phase types is contained in the pattern &1 ( BTP_DL 003 )
No roadmap contained in solution item list of &1 ( BTP_DL 004 )
Only one roadmap allowed per solution ( BTP_DL 005 )
Combined conversion packages, analyses, and LTR solutions are forbidden ( BTP_DL 006 )
Only one analysis allowed in a solution ( BTP_DL 007 )
No conversion package, no analysis, and no LTR solution contained ( BTP_DL 008 )
Solution has no portfolio items ( BTP_DL 011 )
No master parent set for requirement ( BTP_DL 012 )
No docu object assigned ( BTP_DL 019 )
No DOCUTYPE specified ( BTP_DL 021 )
No DOCUOBJ specified ( BTP_DL 022 )
Different roadmaps for '&1' and '&2' ( BTP_DL 029 )
No items contained in project template ( BTP_DL 033 )
Not all mandatory RFC connections are specified ( BTP_DL 034 )
Not all mandatory systems are specified ( BTP_DL 035 )
System type &1 is not source or target of an RFC connection ( BTP_DL 036 )
RFC connection &1 from &2 to &3 is mandatory but &4 is optional ( BTP_DL 037 )
No default Solution Manager project found ( BTP_DL 040 )
No work center project found for Solution Manager project &1 ( BTP_DL 041 )
Neither HTTPS nor HTTP is configured. Check transaction SMICM. ( BTP_DL 068 )
System landscape &1 uses same RFC connections ( BTP_DL 070 )
There is a newer version available of &1 ( BTP_DL 082 )
Required solution &2 of requirement &1 is missing ( BTP_DL 083 )
Item &1 has a different scenario ( BTP_DL 084 )
Check step &1 for combining with step &2 ( BTP_DL 087 )
Combining of '&1' with '&2' is not possible ( BTP_DL 088 )
Combining of '&1' with '&2' is possible ( BTP_DL 089 )
Solutions &1 and &2 differ in used system landscape type ( BTP_DL 091 )
TDMS solutions '&1' and '&2' are not compatible ( BTP_DL 094 )
Step has already been started ( BTP_DL 095 )
'&1' is obsolete ( BTP_DL 096 )
No help portal path specified ( BTP_DL 099 )
TDMS requirements '&1' and '&2' are not compatible ( BTP_DL 104 )
Enter project &1 and deactivate package &2 ( BTP_PCI 001 )
'Remote Logon' test for RFC destination &1 failed in &2 ( BTP_PCI 012 )
DMIS is not installed in &1 ( BTP_PCI 014 )
Do you really want to allow changing the status of an activity manually? ( BTP_PWD 019 )
Cannot Add or Remove Activity ( BTP_PWD 042 )
Cannot remove user &1 ( BTP_PWD 043 )
Process Execution Plan was already stopped ( BTP_PWD 045 )
Activity with other prefix than '&1' cannot be inserted. ( BTP_PWD 047 )
Class CL_SPROJECT_HTML_SCOPING not existing ( BTP_SMI 001 )
Method CREATE_PROJECT does not exist in class CL_SPROJECT_HTML_SCOPING ( BTP_SMI 002 )
SAP note 1431950 is missing in the system ( BTP_SMI 003 )
Server &1 is not of server type "Server"; see long text ( BTP_WD 031 )
Server &1 is not of server type "Group"; see long text ( BTP_WD 032 )
HTML client for NWBC can't be launched, use fallback if required. ( BTP_WD 100 )
No action possible at present; There are still jobs to be completed. ( BU 007 )
The industry sector tools for Release & were not yet imported ( BU 008 )
Industry &1 is active in the system and therefore has to be imported ( BU 011 )
Industry sector tool locked; An action is still running. ( BU 012 )
Industry &1 only partially active. A reset is not possible. ( BU 039 )
Replaced industry texts were saved ( BU 101 )
The texts could not be saved (system error) ( BU 102 )
As you requested, the replaced texts were not saved ( BU 103 )
Line to be replaced was not found (program error) ( BU 104 )
There is no replacement term in table TSKTW for language & industry & ( BU 105 )
No language description for language & in language & ( BU 106 )
Business agreement class not filled (contract account &1) ( BUAG 001 )
No FI-CA payment cond. found for terms of payment &2 (contract acct &1) ( BUAG 004 )
No FI-CA acct determ. charac. (SD) found for tax type (contract acct &1) ( BUAG 005 )
Same numbers cannot be ensured (contract account &1) ( BUAG 006 )
Same numbers cannot be ensured (contract account &1) ( BUAG 007 )
The function business agreement for collective bill is not active ( BUAG 012 )
Adapt customer function module &1 ( BUAG 013 )
System error during access of the enqueue table ( BUAVC 010 )
System error in: &1, Table: &2, Report: &3, Routine: &4 ( BUAVC 011 )
RFC task &1 failed during parallel processing ( BUAVC 012 )
Invalid number of parallel RFC tasks ( BUAVC 013 )
Availability control: ambiguous conditions for checking the document ( BUAVC 030 )
Availability control: ambiguous conditions for checking the document ( BUAVC 031 )
Derivation of the activity group failed: no value found ( BUAVC 100 )
Derivation strategy &2 (&1) is not available in client &3 ( BUAVC 101 )
The leading characters are reserved for a ledger number ( BUAVC 102 )
More than one AVC data source defined for &1 ( BUAVC 507 )
Availability control ledger &1 does not belong to application &2 ( BUAVC 508 )
Invalid tolerance limit for activity group &1 ( BUAVC 509 )
Invalid combination of message type and availability control event ( BUAVC 512 )
Data source &1 is not valid for ledger &3: wrong application component ( BUAVC 514 )
Currency key missing for the tolerance profile &1 ( BUAVC 515 )
Invalid tolerance profile &1: incompatible currency key &3 ( BUAVC 516 )
Absolute variance not taken into account ( BUAVC 517 )
Usage rate not taken into account ( BUAVC 518 )
Event combined with message type 'Error' has potentially no effect ( BUAVC 524 )
Change to BUAVC* tables: &1 entries require manual update in client &2 ( BUAVC 804 )
Derivation strategy &2 (&1) is not available in client &3 ( BUBAS 101 )
Multiple implementations active for BAdI &1 ( BUBAS 406 )
Connection to SAP HANA database is not available; expect long runtimes ( BUBAS 410 )
Library &1 saved ( BUCC 000 )
Library &1 not saved ( BUCC 001 )
Check rule &1 of library &2 saved ( BUCC 002 )
Library &1/Rule &2: Rule definition is not consistent in the database ( BUCC 111 )
Specify a key for the library ( BUCC 201 )
Specify a key for the check rule ( BUCC 202 )
No library defined for FM area &1/ fiscal yr &2/ version &3 ( BUCC 302 )
Inconsistent customizing of the consistency check for budget entry doc. ( BUCC 303 )
Inconsistent customizing of the consistency check for budget addresses ( BUCC 304 )
The transfered data is inconsistent ( BUHI_INTERFACE 002 )
The transfered data is inconsistent ( BUHI_INTERFACE 003 )
The operation 'create_node ( &1,&2,&3,&4 )' is inconsistent ( BUHI_INTERFACE 005 )
The operation 'assign_node( &1,&2,&3,&4 )' is inconsistent ( BUHI_INTERFACE 006 )
Key figure &1 not saved ( BUKF 001 )
Key figure &1 already exists ( BUKF 002 )
Key figure &1 does not exist ( BUKF 003 )
No field group found for data source &1 ( BUKF 004 )
Key figure &1 recorded in a transport request ( BUKF 005 )
Key figure &1 not or only partially recorded in a transport request ( BUKF 006 )
Key figure &1 deleted ( BUKF 007 )
Key figure &1 not deleted ( BUKF 008 )
Category &1 already exists ( BUKF 020 )
Category &1 does not exist ( BUKF 021 )
Category &1 is not supported by key figure &2 ( BUKF 022 )
&1 is not in the SAP namespace ( BUKF 101 )
&1 is not in customer namespace ( BUKF 102 )
Incorrect value. Use F4 help ( BUKF 201 )
'*' is not a supported meta-value ( BUKF 202 )
'#' is not a supported meta-value ( BUKF 203 )
SPACE is not a supported meta-value ( BUKF 204 )
Specify a name for the key figure ( BUKF 205 )
Specify a heading for the key figure ( BUKF 206 )
Relative meta-values are not supported ( BUKF 207 )
Specify an identifier for the key figure ( BUKF 208 )
Unable to make change due to error in parameters ( BUP 015 )
Not possible to maintain business partner data using APIs ( BUP 017 )
&1 entries stored in &2 enrichment file: &3 &4 ( BUPA_BIP 207 )
Cleansing case &1 created with ID no. &2 ( BUPA_BIP 244 )
BP &1 &2 stored in system as 'No Hit'record ( BUPA_BIP 249 )
No target Business Partner exists ( BUPA_CLEAR 000 )
Data could not be saved for target business partner ( BUPA_CLEARING 003 )
Entries for time &1, object &2 not activated ( BUPA_CURRENT_DATA 002 )
Business partner maintenance is already active ( BUPA_DIALOG_JOEL 104 )
Enter the Required Data ( BUPA_DIALOG_JOEL 109 )
When your changes are saved, they are marked for activation on &1 ( BUPA_DIALOG_JOEL 141 )
Business partner &1 is already assigned to a pricing node ( BUPA_HIERARCHY 010 )
Hierarchy node &1 already exists ( BUPA_HIERARCHY 014 )
Node &1 does not belong to the hierarchy tree to be processed ( BUPA_HIERARCHY 018 )
You cannot create hierarchy trees of this category ( BUPA_HIERARCHY 025 )
You cannot change hierarchy trees of this category in this system ( BUPA_HIERARCHY 026 )
&1 business partners from &2 could not be assigned ( BUPA_HIERARCHY 041 )
Business partner &1 could not be assigned to node &2 ( BUPA_HIERARCHY 042 )
Processing started according to Customizing settings ( BUPA_INTERFACE 004 )
Could not find business partner using ID type &1 ID &2 ( BUPA_INTERFACE 009 )
Partner with ID &1 does not exist ( BUPA_INTERFACE 010 )
Partner with ID &1 already exists and cannot be created again ( BUPA_INTERFACE 011 )
Partner &3 already exists with ID type &1 ID &2; cannot create again ( BUPA_INTERFACE 012 )
Distribution of business partner data is not active ( BUPA_INTERFACE 013 )
Not all data of business partner &1 was updated in the ERP system ( BUPA_MW_EXCHANGE 101 )
Not all data of BP relationship &1-&2-&3 was updated in the ERP system ( BUPA_MW_EXCHANGE 102 )
No user status defined in Customizing for object type &1 ( BUPA_STATUS 010 )
Status &1 deactivated and replaced by subsequent status ( BUPA_STATUS 011 )
Status &1 cannot be deleted, only replaced ( BUPA_STATUS 013 )
Business partner &1 assigned to different status profile &2 ( BUPA_STATUS 014 )
Status object group TUS is not permitted ( BUPA_STATUS_BW 000 )
Status object &1 was already used in the user status maintenance ( BUPA_STATUS_BW 001 )
Status object &1 was already used in the system status maintenance ( BUPA_STATUS_BW 002 )
System error occurred in program &1 [&2] ( BUPA_STATUS_BW 003 )
Template type &1 does not have category "only reference possible" ( BUPA_TFW 001 )
A template is already assigned to template type &1 ( BUPA_TFW 019 )
Simultaneous time-dependent operations are not permitted ( BUP_CENT 017 )
Error occurred when deleting partner addresses ( BUP_CENT 030 )
BP &3: Change of field &2 not permitted using data source &1 ( BUP_EEWA 051 )
BP &1 already has max. no. of rel.ships possible for rel.ship category &2 ( BUP_RELATIONS 174 )
Max. no of relationships (&1) of category &2 exceeded in relationship set ( BUP_RELATIONS 175 )
There is no relationship between partner &1 and partner &2 ( BUR 102 )
Calculation formula &1 does not exist ( BURB 502 )
Invalid currency &3 assigned to calculation formula &1 ( BURB 601 )
Inconsistent calculation formula &1: upper limit lower than lower limit ( BURB 602 )
Error occurred during evaluation of calculation formula &1 ( BURB 603 )

Length: 952025 Date: 20191019 Time: 084757

Count: 3767     sap01-206 ( 4290 ms ) This documentation is copyright by SAP AG.

Our Service

Looking for Support? Questions?

The

Consolut

Callback-Service

Leave us your contact details and we will call you back. Panels marked with * are mandatory.