Messages

Complete Message Docu Documentation From BUS_LOCATOR104 up to CACSPY251

This documentation is copyright by SAP AG.
Count: 3044 Skipped: 8
Message Docu
Description
More than &1 &2 found; the display is restricted to &1 ( BUS_LOCATOR 107 )
Input server does not exist ( BUS_ROUTING 001 )
Routing attributes cannot be checked. Scenario uses inactive server ( BUS_ROUTING 056 )
Attribute & can not be deleted as long as assignment exists ( BUS_ROUTING 060 )
Choose the type of scenario you want to create ( BUS_ROUTING 061 )
No user available for processor. Business partner was & ( BUS_ROUTING 414 )
Position the Cursor in the Tab in Which You Want to Navigate ( BUS_TOOLS 120 )
Change the time constraint only after a check ( BUX_EEW 008 )
Maximum length of the field with data type Character is 254 ( BUX_EEW 022 )
Maximum length of the field with data type Amount is 31 ( BUX_EEW 027 )
Data has been changed. ( BUX_EEW 060 )
Maximum decimal length of the field with data type Amount is 14 ( BUX_EEW 066 )
User type & is not active ( BV 003 )
DDIC lock module for object &1 is not available or not activated ( BV 006 )
Measurement data is locked for transfer ( BV 007 )
None of the clients in this system is a production client ( BV 015 )
SAPNet status cannot be set ( BV 051 )
Internal error: could not create the SDCCN session ( BV 055 )
Measurement is currently locked ( BV 097 )
Internal error calling function VCM_TRANSFER_STATUS_GET ( BV 101 )
Internal error calling function VCM_TRANSFER_STATUS_GET ( BV 104 )
&1 users that are not classified are counted as &2 ( BV 105 )
Internal error: unknown value &1 in "Period" field of table TUAPP ( BV 106 )
A measurement of application &1 is still running ( BV 107 )
Database error processing the job status for application &1 ( BV 108 )
Could not start job &3 for application &1 ( BV 109 )
Could not start job &3 for application &1 ( BV 110 )
Could not start job RSUVM007 for application &1 ( BV 111 )
Could not start job RSUVM008 for application &1 ( BV 112 )
Could not get print parameters ( BV 113 )
Lock entry for application &1 does not need to be updated ( BV 114 )
Lock entry for application &1 not found in table TUJOB ( BV 115 )
Selection option for the period can only include intervals to "include" ( BV 116 )
Only intervals are allowed in the select option for the period ( BV 117 )
Measurement of application &3 terminated ( BV 118 )
Internal error: Could not find client &1 in internal table ( BV 119 )
Internal error: Could not find clients in internal table ( BV 120 )
The TUREP records of application &1 are from different measurements ( BV 123 )
Lock entry for application &1 set to status "A" (aborted) ( BV 125 )
Could not set lock entry for application &1 to "A" ( BV 126 )
Could not start background job for HR measurement ( BV 127 )
Standard function modules for HR measurement do not exist ( BV 128 )
Standard function modules for HR measurement not uniform ( BV 129 )
Measurement job for application &1 does not have status "scheduled" ( BV 130 )
Measurement job for application &1 does not have status "started" ( BV 131 )
State of measurement job: &1 not yet finished, &2 canceled ( BV 132 )
&1 measurement job(s) terminated ( BV 134 )
Application &1: FM &2 does not have the requested interface ( BV 135 )
InternalError: FORM check_and_save does not recognize value &1 for TextID ( BV 137 )
Check the classification of &1 users with SSCR key ( BV 146 )
The user type "substitute" cannot be a new type ( BV 148 )
The user type "multiclient/multisystem" cannot be a new type ( BV 149 )
User type &2 unknown ( BV 156 )
Select at least one active price list ( BV 157 )
Migrate user types after the change (See long text) ( BV 158 )
Internal error: Could not find lic_type &3 in selection_table ( BV 160 )
Error during update of DB table usr06 ( BV 161 )
No default setting for users who are not classified (long text) ( BV 164 )
No default setting for users who are not classified (long text) ( BV 165 )
&1 users are classified according to inactive price lists ( BV 166 )
Internal error: &1 sets with REPORTTYPE = 'BP' in table TUREP ( BV 167 )
Migration works in the current client only ( BV 169 )
Data was already passed to SDCC for transport to SAP ( BV 171 )
Data has already been transferred to SAP ( BV 173 )
No measurement data exists ( BV 174 )
Internal error: Cannot create SDCC session ( BV 177 )
Internal error while calling a function module ( BV 178 )
The transfer of the measurement data was scheduled ( BV 179 )
You do not have authorization to transfer the data ( BV 180 )
Internal error: Cannot schedule transfer ( BV 181 )
Internal error while saving the transfer status in table TUSTAT ( BV 182 )
&1 users inherit their user classification from reference user ( BV 183 )
&1 users could not inherit their classification from reference user ( BV 184 )
SDCC is incorrectly installed ( BV 187 )
SDCC is incorrectly installed ( BV 188 )
Error while locking table TUCNT ( BV 189 )
Unknown error while consolidating object counters ( BV 190 )
Special version of &1 users transferred from table USR14 to table USR06 ( BV 191 )
Error while calling SLIM_CNT_CONSOLIDATE_COUNTERS ( BV 193 )
The object counters were consolidated ( BV 194 )
Internal error while updating the object counters ( BV 195 )
Select at least one user ( BV 196 )
No standard user type defined ( BV 199 )
No default setting for users who are not classified (long text) ( BV 201 )
Internal error when rolling the table control ( BV 202 )
Select at least one active price list ( BV 203 )
You are authorized to change the &1 users ( BV 204 )
Internal error occurred while searching internal table IT_USR06_RAW ( BV 205 )
You are not authorized to change &1 users ( BV 207 )
Cannot classify &1 users with empty names ( BV 209 )
Internal error: Unknown exception received from FM VCM_GET_MEAS_DATA ( BV 212 )
Internal error: Cannot set new transfer status ( BV 213 )
Internal error: Multiple measurements are locked ( BV 214 )
Internal error: Multiple measurements are locked ( BV 215 )
Internal error saving time data for data transfer to SDCC ( BV 216 )
Measurement data was passed to transaction SDCC ( BV 217 )
Internal error: Cannot read transfer status ( BV 218 )
Internal error occurred while saving transfer time ( BV 219 )
&1 users that are not classified are counted as &2 ( BV 221 )
User type 92 "External Contact" is no longer valid (&1 users) ( BV 223 )
Error when locking table TULTRANS ( BV 233 )
User type &1 is unknown ( BV 250 )
Special version &1 is unknown ( BV 251 )
Data missing for system &1; check only in child system ( BV 264 )
User type &1 is not active in child system &2 ( BV 265 )
User type &1 is unknown in child system &2 ( BV 266 )
No system-specific user classification: license data not "global" ( BV 267 )
Invalid CUA model ( BV 268 )
System &1 is not assigned to the user or not part of the CUA landscape ( BV 269 )
Substituted user &1 does not exist in logical system &2 ( BV 270 )
Specification of a special version is not permitted for user type &1 ( BV 271 )
Special version &1 is unknown in child system &2 ( BV 272 )
Child system &1 does not support global user classification ( BV 273 )
License Measurement: Multiple entries for system &1 ( BV 274 )
License Measurement: Multiple entries for central system &1 ( BV 275 )
No system-specific user classification in a standalone system ( BV 276 )
No system-specific user classification in a CUA child system ( BV 277 )
No system-specific user classification: Not a central system ( BV 278 )
No system-specific user classification: No CUA ( BV 283 )
Maintain user classification only in the central system ( BV 285 )
Error when consolidating the CPU data ( BV 286 )
RFC destination &1 created ( BV 296 )
Client measurement: incorrect entry in table TUCON ( BV 350 )
&1: No meas. start, since a meas. is already running (SAP Note 750243) ( BV 425 )
Extraction not possible: First execute initialize from & ( BWFIAA 000 )
BAdI implementation & inactive in source system & ( BWFIAA 001 )
Extraction of & not possible. Extract & first ( BWFIAA 004 )
Errors occurred in the depreciation simulation for attachment & &-& ( BWFIAA 006 )
Posting run in OLTP for company code & in period & & terminated. ( BWFIAA 007 )
Extraction of &1 not possible - first request delta ( BWFIAA 008 )
Timestamp information in table TABA not complete ( BWFIAA 009 )
Ledger-group-specific extraction not possible (company code &1) ( BWFIAA 010 )
Error with the FI-AA Extraction (Additional Information): &1 &2 &3 &4 ( BWFIAA 013 )
Timestamp information inconsistent in table TABA ( BWFIAA 014 )
Invalid selection criterion in the interface ( BWFS_TECHNICAL 001 )
A Customizing entry is missing for the InfoSource &1 in table &2 ( BWFS_TECHNICAL 002 )
No initialization with InfoSource &1 and selection &2 ( BWFS_TECHNICAL 003 )
Table &1 locked with argument &2 ( BWFS_TECHNICAL 005 )
DeltaInfoSource &1 is not uniquely assigned to one position InfoSource ( BWFS_TECHNICAL 006 )
Delta procedure with InfoSource &1 and selection &2: No position initial. ( BWFS_TECHNICAL 007 )
&2 time stamps have been deleted for InfoSource &1 ( BWFS_TECHNICAL 008 )
Initial infosource &1, selection &2, time stamp &3 ( BWFS_TECHNICAL 053 )
Delta infosource &1, selection &2, time stamp to &3, time stamp from &4 ( BWFS_TECHNICAL 054 )
Time stamp converted to: &1 &2 through &3 &4 ( BWFS_TECHNICAL 055 )
Records &1 - &2 of FS package &3 were transferred to the delta queue ( BWFS_TECHNICAL 059 )
Report row hierarchy header is not unique -> ( BWOM2 011 )
Line &1 refers to totals row &2, which does not exist -> ( BWOM2 012 )
A totals row (&2) cannot refer to a cost element group -> ( BWOM2 013 )
A cost element group has to be assigned to a base row (&1) -> ( BWOM2 014 )
Generation process started for easy query &1 ( BW_BICS_EQ 005 )
Checking dependencies of &1 to easy queries... ( BW_BICS_EQ 007 )
This easy query is obsolete. Regenerate it. ( BW_BICS_EQ 011 )
Deletion process started for easy query &1 ( BW_BICS_EQ 014 )
Query &1 does not comply with the prerequisites for the easy query ( BW_BICS_EQ 019 )
The columns in query &1 do not contain key figs. Easy query not possible. ( BW_BICS_EQ 025 )
Characteristics in the columns in query &1. Easy query cannot be created. ( BW_BICS_EQ 026 )
Query &1 contains two structures. Easy query cannot be generated. ( BW_BICS_EQ 027 )
Query &1 is configured as an easy query. Only change if necessary. ( BW_BICS_EQ 028 )
&1 is not authorized to edit easy queries ( BW_BICS_EQ 031 )
Native service creation for &1 runs in background. Add service manually. ( BW_BICS_EQ 100 )
Delete related GW service to stop external usage (/iwfnd/main_service) ( BW_BICS_EQ 104 )
Navigation failed; variables and query result are probably out of sync. ( BW_REPORTING_FPM 040 )
Unable to read Dictionary information ( BX 700 )
Message &3 already exists for &1 of business object &2 ( BXX 082 )
Mass processing is not supported for message &1 ( BXX 101 )
Function module &1 has too many parameters ( BXX 104 )
Employee - Single Employment/Employment Detail can not be combined ( BYD_ODT_ERP_INT 011 )
Employee - Single Employment is not recommended - see long text ( BYD_ODT_ERP_INT 012 )
Employee - Employment Detail should be used - but restrictions apply ( BYD_ODT_ERP_INT 013 )
Customizing for feedback functions missing ( B~ 020 )
Message type & does not exist ( C! 001 )
Sytem message & from work area & does not exist ( C! 002 )
User-defined message & from work area & does not exist ( C! 003 )
Error management is not active ( C! 005 )
Internal error: Object ID & <> & ( C! 006 )
Internal Error: Application ID or object ID does not exist ( C! 007 )
Transaction was cancelled because of termination message &1 &3 ( C! 008 )
Internal error ( C! 012 )
Log could not be found ( C! 013 )
No assignment of the system message(s) to mail partner(s) found ( C! 014 )
Tolerance limit was exceeded when number & was assigned ( C! 017 )
You cannot save the error log as the number range is exhausted ( C! 018 )
Error in application &: System message &2 &3 contains unknown msg. type ( C! 019 )
Department does not exist ( C! 020 )
Output of error log in spool request & ( C! 021 )
The message type cannot be changed for system message & & ( C! 023 )
Msg.severity must be greater than that specified in the SAP applic. ( C! 024 )
Object structure & does not exist or is too long ( C! 025 )
Sub-object structure (DDIC) & does not exist or is too long ( C! 026 )
Log table has more than 99999 entries ( C! 028 )
Log table has more than 99999 entries ( C! 029 )
Message severity must be lower than that defined by the application ( C! 030 )
The additional info structure (DDIC) & does not exist ( C! 031 )
Internal error in error management table ( C! 800 )
A serious error occurred when processing the program ( C# 001 )
Profile & does not exist ( C# 003 )
Availability can only be displayed for personnel resources ( C# 004 )
Assignment not possible since work center & was not found ( C# 009 )
The work distributed to personnel resource &1 was rescheduled ( C# 014 )
No hit list could be produced for network activity &1 &2 ( C# 015 )
Object type & cannot be selected ( C# 019 )
Work center &1/personnel resource &2 contains inconsistent data ( C# 020 )
Error defining the planning period ( C# 021 )
Planning period is longer than period display ( C# 023 )
Assignment not possible: &1 activity &2 &3 &4 ( C# 034 )
Activity &1/&2 is already been processed by &3. ( C# 049 )
Program error: There is distributed work without capacity requirements ( C# 101 )
All messages called within the project must be defined ( C$ 002 )
You have reached the first data record ( C$ 101 )
You have reached the last data record ( C$ 102 )
This function has not been implemented yet ( C$ 103 )
Could not save data ( C$ 106 )
No data found ( C$ 109 )
Cannot find parameter "&1" ( C$ 110 )
Could not start job. Error in function & (exception &) ( C$ 112 )
Abnormal termination & (&) ( C$ 113 )
Could not find interval &1 in number range &2 ( C$ 114 )
Number range error: number range & is not internal/external ( C$ 115 )
Number range error: Could not find number range & ( C$ 116 )
Could not get number from number range & ( C$ 117 )
Operation & was terminated ( C$ 118 )
Operation & is not supported in this area of the screen ( C$ 119 )
You do not have authorization for the required action ( C$ 120 )
System does not support function & ( C$ 121 )
Error in buffer: incorrect mode '&' in interface table ( C$ 122 )
No entry selected ( C$ 123 )
Internal error in function & (exception &) ( C$ 125 )
Background job is already running ( C$ 127 )
Error in buffer: update of nonexistent record &1 ( C$ 128 )
The & key & is used by deleted & ( C$ 129 )
&1 key &2 is used already ( C$ 130 )
Could not lock table &1 ( C$ 135 )
& & & & ( C$ 137 )
Cannot find usage for change number & ( C$ 138 )
Internal error: &1 &2 &3 ( C$ 139 )
Cannot lock object & ( C$ 141 )
Error in buffer: update failed (&1, &2) ( C$ 142 )
Overflow in interval &1, number range &2 ( C$ 143 )
Internal error in interval &1, number range &2 ( C$ 144 )
Cannot get number from interval &1, number range &2 ( C$ 145 )
Assigned number from interval &1 in number range &2 is in critical range ( C$ 146 )
Assigned last number of interval &1, number range &2 ( C$ 147 )
Cannot lock & ( C$ 149 )
Cannot find object & ( C$ 150 )
Variant &1 of report &2 does not exist ( C$ 152 )
Internal program error; (&1 &2 &3 &4) ( C$ 153 )
Cannot open file &1&3 (&2) ( C$ 155 )
Error when reading, writing, or deleting file &1 ( C$ 156 )
You have no read or write authorization for file &1 ( C$ 157 )
Error when transferring file &1 to &2 ( C$ 158 )
You have no authorization for some of the selected & ( C$ 160 )
Field &1 is a mandatory field ( C$ 161 )
Some of the selected &1 are being processed ( C$ 162 )
You cannot perform this activity for &1 used ( C$ 163 )
File &1 already exists ( C$ 164 )
&1 &2 does not exist ( C$ 165 )
User log could not be initialized ( C$ 168 )
No authorization for &1 &2 ( C$ 169 )
Select at least 2 entries ( C$ 170 )
File &1 is empty ( C$ 171 )
Some of &1 are already available for &2 ( C$ 172 )
Error in user exit parameters (&1;&2) ( C$ 174 )
Environment parameter &1 does not exist ( C$ 175 )
You do not have authorization for phrase library and phrase group ( C$ 177 )
Periodic scheduling of job not possible here ( C$ 179 )
Error &3 in program &1 when calling APIs &2 (object: &4) ( C$ 180 )
Table & not in DDIC or not permitted for the activity ( C$ 182 )
An error occurred when saving table &1 ( C$ 183 )
Check Customizing for user exit: Category &1 name &2 ( C$ 184 )
Unit of measurement profile &1 does not exist ( C$ 185 )
Required action is not possible in the WebGUI ( C$ 186 )
Specification key & is tagged as deleted ( C$ 188 )
Specification &1 is currently being edited ( C$ 189 )
End status already reached ( C$ 190 )
System status not available; create the system status ( C$ 191 )
Search not possible; search pattern is too long due to quotation marks ( C$ 193 )
Table &1 does not contain field &2 ( C$ 194 )
Buffer for &1 was not initialized on application server ( C$ 195 )
Field '&1' is not being used by program ( C$ 196 )
Function '&1' may no longer be used ( C$ 197 )
Table LOADTAB in buffer does not contain entry searched for ( C$ 198 )
Lock modes in buffer are different (&1 <> &2) ( C$ 199 )
& may only contain alphanumeric characters ( C$ 201 )
Language field for & has been deleted as it is not language-dependent ( C$ 202 )
No data provider is entered for authorization group ( C$ 203 )
& & & ( C$ 204 )
Cannot lock & ( C$ 205 )
Number range & is incorrect ( C$ 206 )
Specification key & outside of permitted range ( C$ 207 )
Change number & is unknown; using validity date ( C$ 208 )
Could not find material & ( C$ 210 )
Enter a valid material-plant combination ( C$ 211 )
&: & ( C$ 212 )
The reference specification you entered does not exist ( C$ 213 )
Some of the selected specifications are being processed ( C$ 214 )
Specification &1 is currently used in &2 ( C$ 215 )
Reference specification collision; use another reference ( C$ 216 )
Spec. is referenced by &; its reference & already assigns values to '&' ( C$ 217 )
A specification cannot reference itself ( C$ 218 )
The specification you entered already references other specifications ( C$ 219 )
The identifier is longer than & characters and must be abbreviated ( C$ 220 )
You cannot assign materials to specification type & ( C$ 221 )
Referencing or inheriting with specification type & is not permitted ( C$ 222 )
The specified specification is being processed ( C$ 223 )
Check function '&' is inactive ( C$ 224 )
You are not authorized to delete the specification & ( C$ 225 )
Syntax error: &1 ( C$ 226 )
Object '&1' already exists ( C$ 227 )
You cannot enter a generic and a plant-specific material ( C$ 228 )
Specify a material ( C$ 229 )
You cannot create specifications for authorization group &1 ( C$ 230 )
Identification type &1 is language-dependent; specify a language ( C$ 232 )
Identificat. type &1 is language-dependent; entry valid for all languages ( C$ 233 )
Define a target specification ( C$ 234 )
Cannot find copy template ( C$ 235 )
Unable to find referencing specifications that meet the search criteria ( C$ 236 )
Enter category, type, and identifier ( C$ 237 )
Error during secondary data determination or check ( C$ 240 )
Secondary data function &1 is not available ( C$ 241 )
Secondary data function &1 is not active ( C$ 242 )
Error in specification data server ( C$ 244 )
Error when calling secondary data determination using &1 ( C$ 245 )
&1: &2, correction: &3 ( C$ 246 )
User-defined text has a long text; changes cannot be made to text type & ( C$ 249 )
Invalid value assignment type '&' ( C$ 252 )
Invalid value assignment category for value assignment type '&' ( C$ 253 )
Invalid class assignment for value assignment type '&' ( C$ 254 )
Data has changed, but no transfer to dialog ( C$ 255 )
Value assignment header of '&' has been deleted ( C$ 256 )
System does not support value assgnmt items for value assignment type '&' ( C$ 257 )
Error when processing step loop block ( C$ 258 )
Error &1 when loading characteristic value assignment ( C$ 259 )
Could not create default usage ( C$ 261 )
Invalid usage profile for value assignment type '&' ( C$ 262 )
Default usage created ( C$ 263 )
Could not completely delete value assignment ( C$ 264 )
Assigned usage has been deactivated ( C$ 265 )
Could not deactivate usage ( C$ 266 )
Assigned usage has been activated ( C$ 267 )
Could not activate assigned usage ( C$ 268 )
Property tree & does not exist ( C$ 269 )
Could not process entry '&2' for property tree '&1' ( C$ 270 )
All data saved except & ( C$ 271 )
Default assessment created ( C$ 273 )
Could not create default assessment ( C$ 274 )
You can only assign one value to characteristic & ( C$ 275 )
Property trees &1 and &2 do not exist ( C$ 276 )
Property tree &1 was set as the default ( C$ 277 )
Cannot display property tree ( C$ 278 )
Cannot find tree '&1'; system selected tree '&2' ( C$ 279 )
Could not copy all value assignment data (&1) ( C$ 280 )
Internal error during determination of class for value assignment type & ( C$ 281 )
Cannot find default assessment ( C$ 282 )
Cannot create value assignment header; data is not saved ( C$ 283 )
System error: current value assgnmt header not identical to read header ( C$ 284 )
Error in node no. &1 (&2: &3) of property tree ( C$ 285 )
Error when processing a characteristic value assignmt with change number ( C$ 286 )
Characteristic not assigned to phrase set features phrase check function ( C$ 287 )
This activity deletes a min. of one phrase in the value assignment ( C$ 288 )
Class key & is incomplete ( C$ 289 )
Enter a characteristic name ( C$ 293 )
Cannot find object with key & ( C$ 297 )
No phrase set is assigned to characteristic & ( C$ 299 )
Could not find source & ( C$ 301 )
Cannot find regulatory list & ( C$ 302 )
The long text indicator is set, but no long text exists ( C$ 303 )
You cannot assign specifications to this component type ( C$ 304 )
Enter a component type first ( C$ 305 )
Enter a specification key ( C$ 306 )
You cannot enter the selected specification here ( C$ 307 )
Error when calling long text processing ( C$ 308 )
Enter an exponent ( C$ 309 )
Maximum no. &1 for user-defined texts of user-def. text type &2 exceeded ( C$ 311 )
Char-dep. user-def.txt type &1 not assgnd to a char. of val. ass. type &2 ( C$ 312 )
Enter a user-defined text type ( C$ 313 )
Phrase &1 in characteristic &2 is from passive library ( C$ 314 )
Phrase &1 in characteristic &2 not contained in phrase set ( C$ 315 )
User-def. text type &1 may only be used once in value assgnmt type &2 ( C$ 316 )
Key & already exists ( C$ 323 )
Fill all key fields ( C$ 326 )
Property tree &1 has no root node ( C$ 328 )
Root node of property tree &1 contains error ( C$ 329 )
Active property tree contains error ( C$ 330 )
Internal system error &1 for node &2 of property tree &3 ( C$ 331 )
Invalid value in "Level" field for node &1 of property tree &2 ( C$ 332 )
Value assignment type &2 does not exist in property tree &1 ( C$ 333 )
No authorization to maintain a usage with rating &1 ( C$ 334 )
No authorization to maintain usage &1 / &2 ( C$ 335 )
No authorization to delete rating &1 ( C$ 336 )
The component tree cannot be displayed ( C$ 338 )
No phrase-enabled characteristic is available for class & ( C$ 339 )
TCG11: cannot find name for class &1 in value assignment type &2 ( C$ 341 )
TCG66: cannot find name for characteristic &1, value assignment type &2 ( C$ 343 )
&1: Cannot convert table due to errors during update ( C$ 345 )
Application: EHS Client: &1 ( C$ 346 )
No phrase set selected ( C$ 352 )
Could not find phrase set &1 ( C$ 353 )
Phrase group &2 does not exist in phrase library &1 ( C$ 354 )
Cannot find phrase library &1 ( C$ 355 )
Phrase language &1 does not exist in Customizing ( C$ 356 )
No authorization for phrase group &1, phrase library &2 ( C$ 357 )
You have specified a phrase text but no language ( C$ 358 )
Drilldown reporting impossible: Insufficient criteria ( C$ 359 )
Cannot delete the phrase text in the source language ( C$ 360 )
No active library available ( C$ 361 )
More than one library is marked as active ( C$ 362 )
This function can only be used for phrases in the active library ( C$ 363 )
No language identifier: Cannot save phrase set name ( C$ 364 )
Phrase key & is already being used ( C$ 365 )
Phrase key & is not within valid range ( C$ 366 )
Phrase is not linked to phrase set ( C$ 367 )
The phrase text within an item is a required field ( C$ 368 )
Phrase set & already exists ( C$ 372 )
No phrases assigned to phrase set ( C$ 374 )
Cannot save change because of lock ( C$ 375 )
Phrase &1 does not exist ( C$ 378 )
Phrases saved to the backup library ( C$ 379 )
Only select phrases from one phrase library ( C$ 380 )
Description already exists in language & ( C$ 382 )
Some phrases are still assigned to phrase sets ( C$ 383 )
Phrase sets are still assigned to phrases ( C$ 384 )
Phrase sets are still assigned to characteristics ( C$ 385 )
The phrase key & you entered is rejected by the syntax check ( C$ 387 )
Enter a number range for the phrase library in Customizing ( C$ 388 )
No phrase has been selected as the new main phrase ( C$ 389 )
The system has found non-unique characteristic assignments ( C$ 390 )
Reference phrase &1 from library &2 does not exist in the system ( C$ 391 )
Error when combining phrases ( C$ 394 )
Backup phrase library does not exist ( C$ 396 )
Phrase group for backup phrase library does not exist ( C$ 397 )
A phrase cannot have several reference phrases with text transfer ( C$ 399 )
Application & is not assigned to a log ( C$ 401 )
Could not read syntax ( C$ 402 )
Symbol &: Identification category & is not defined ( C$ 403 )
Symbol &: Identification type & is not defined ( C$ 404 )
Symbol &1: Regulatory list &2 is not defined ( C$ 405 )
Repeating group &1&2: Invalid logical operator &3 ( C$ 407 )
No short text for symbol & ( C$ 408 )
Symbol &1&2: nesting of special repeating groups is not supported ( C$ 409 )
System error: Unknown symbol type & ( C$ 410 )
Maximum recursion depth & for environment & has been exceeded ( C$ 411 )
Environment & is not defined in this syntax ( C$ 412 )
You cannot access environment & here ( C$ 413 )
Repeating group &1&2 ended without being open ( C$ 414 )
Nesting error: repeating group &1&2 exited, but &3&4 is active ( C$ 415 )
System error when accessing status stack ( C$ 416 )
Symbol & is not defined ( C$ 417 )
No right parenthesis for symbol parameter & ( C$ 419 )
Index & for symbol & is not numeric ( C$ 420 )
Symbol &1&2: environment &3 is not defined ( C$ 421 )
Value assignment type & is not defined ( C$ 422 )
Expansion category is not defined correctly ( C$ 423 )
Value assignment type & is not defined ( C$ 424 )
No parameters permitted when exiting repeating group &1&2 ( C$ 425 )
No parameters permitted when accessing repeating group &1&2 ( C$ 426 )
Recursion depth &1 for repeating group &2&3 is not numeric ( C$ 427 )
Repeating group &1&2: user-defined text type &3 is not defined ( C$ 428 )
Repeating group &1&2: unknown sort sequence &3 ( C$ 429 )
Repeating group &1&2&3 features unknown control command &4 ( C$ 430 )
Repeating group &1&2: unable to identify parameter ( C$ 431 )
Repeating group &1&2: parameter &3 is not correct ( C$ 432 )
Symbol &1&2: closing parenthesis missing ( C$ 433 )
Repeating group &1&2: No logical operator ( C$ 434 )
Repeating group &1&2: Error in parameter list ( C$ 435 )
Symbol &: Indirection requires three parameters separated by commas ( C$ 436 )
Symbol &: No expansion method specified ( C$ 437 )
Symbol &: Cannot process processing mask & ( C$ 438 )
Symbol &: Cannot process processing function & ( C$ 439 )
Symbol &: Unknown expansion parameter & ( C$ 440 )
Symbol &: No phrase identifier ( C$ 441 )
Repeating group &&: No left parenthesis for parameter definition ( C$ 442 )
Repeating group &&: No environment parameter ( C$ 443 )
Nesting error: No end specified for repeating group && ( C$ 444 )
Nesting error in repeating groups ( C$ 445 )
Version number & is not defined ( C$ 446 )
Symbol &: Bar code expansion needs two parameters ( C$ 447 )
Symbol &: Invalid bar code type ( C$ 448 )
Symbol &: Expansion method & is not defined ( C$ 449 )
Date of phr. lib. to be imported is identical to date of current library ( C$ 451 )
Date of phr. lib. to be imported is older than date of current library ( C$ 452 )
First use function "Check file" ( C$ 453 )
Error during "Check file". Transfer impossible ( C$ 454 )
Data provider &1 does not exist in address management ( C$ 455 )
&1: &2 could not be inserted ( C$ 456 )
Transfer file & does not exist ( C$ 457 )
Could not start job. Error in procedure & (exception &) ( C$ 458 )
&1: Phrase set assignment cannot be imported for phrase &2 ( C$ 459 )
Phrase libraries have different dates ( C$ 460 )
Phrase &1 for characteristic &2 cannot be converted in library &3 ( C$ 461 )
Could not find specifications in transfer file ( C$ 462 )
Cannot transfer all specifications directly ( C$ 463 )
Could not open file & ( C$ 464 )
&1: The object '&2' already exists ( C$ 465 )
Error during check. Note the check log ( C$ 466 )
Administration data of file does not match that of initial check ( C$ 467 )
No identification or error during identification of phrase library ( C$ 468 )
Could not find a correct phrase group ( C$ 469 )
Could not find any correct phrases ( C$ 470 )
Could not find any correct sources ( C$ 471 )
Specification &1 not transferred due to error ( C$ 472 )
Could not find any parameters ( C$ 473 )
Error in initialization of export generator for object &1 ( C$ 474 )
&1: field &2 in table &3 not available in system ( C$ 475 )
&1: &2: Value longer than &3: "&4" ( C$ 476 )
First call of program & ( C$ 477 )
Rebooting program &1 after "&2" ( C$ 478 )
Number of errors: & ( C$ 479 )
&: Cannot find phrase set & ( C$ 480 )
&1: Phrase &2 not found in phrase library &3 ( C$ 481 )
&: Table/field &/& contains unpermitted value: "&" ( C$ 482 )
&1: mandatory field &2 in table &3 does not exist ( C$ 483 )
&1: Transfer terminated ( C$ 484 )
&: Transaction & was undone and skipped ( C$ 485 )
Transfer not possible: No authorization for insertion in & ( C$ 486 )
&: Specification & is not to be transferred ( C$ 487 )
&: Specification & is not unique in the system ( C$ 488 )
&: Referenced specification & does not exist; it will be created ( C$ 489 )
No transfer possible due to syntax errors ( C$ 490 )
Conversion of user settings to "&1" and "&2" ( C$ 491 )
&: Table/field &/& is contained twice in the transfer file ( C$ 493 )
&1: Error for &2 (&3) ( C$ 494 )
Enter &1 ( C$ 495 )
Total number &1: &2 ( C$ 496 )
Number of &1 created: &2 ( C$ 497 )
Number of &1 updated: &2 ( C$ 498 )
&1: Error when creating object in classification system (class &2) ( C$ 499 )
Incorrect segment &2 in line &1 of transfer file, segment &3 expected ( C$ 500 )
Line &: Incorrect delimiter & in transfer file ( C$ 501 )
Line &: Key field & is missing ( C$ 502 )
No entry & in communication table ( C$ 503 )
File or path name of transfer file & too long ( C$ 504 )
Change number and spec. deletion type & can only be used together ( C$ 505 )
Cannot open transfer file & ( C$ 506 )
Entry & in log file is missing ( C$ 507 )
You are not authorized to delete object & ( C$ 508 )
& lines contained in transfer file have been processed ( C$ 509 )
Internal error when saving log entries ( C$ 511 )
Character standard &1 could not be set ( C$ 512 )
Line &: Object & does not meet conventions ( C$ 513 )
Line &: Incorrect date format & in transfer file ( C$ 514 )
Function not possible due to syntax errors ( C$ 515 )
No key fields in source file ( C$ 516 )
Description for phrase library incomplete ( C$ 518 )
No correct phrase group in transfer file ( C$ 519 )
&1: No authorization for importing object &2 ( C$ 520 )
Import not possible; transfer file contains syntax error ( C$ 521 )
No correct specification in transfer file ( C$ 522 )
& syntax errors, permissible number exceeded ( C$ 523 )
&: & ( C$ 524 )
Line &: Invalid length & in transfer file ( C$ 525 )
&1: Referenced specification created with specification key &2 ( C$ 526 )
Cannot find characteristic or class group &1 ( C$ 527 )
You cannot edit characteristic &1; it starts with &2 ( C$ 528 )
Characteristic &1 is in namespace &2 of specification database ( C$ 529 )
Restrict characteristic &1 to class type 100 ( C$ 530 )
Namespace &1 not valid ( C$ 531 )
You have not specified search identifier &1/&2 ( C$ 532 )
&1: Value assignment type &2 is not imported (&3) ( C$ 533 )
Error searching for specification in system; refer to check log ( C$ 534 )
Could not locate any correct identifiers ( C$ 535 )
Error searching for specification with key & in system ( C$ 536 )
&1: Transferring specification with specification key &2 ( C$ 537 )
&: Unable to assign value "&" (&/&) correctly ( C$ 538 )
&: &/&: Value does not exist: "&" ( C$ 539 )
Transfer program was already terminated ( C$ 540 )
Specification & exists at least twice in the file ( C$ 541 )
Specification & from file cannot be uniquely identified (system: &, &) ( C$ 542 )
Specification &1 with key &2 already exists in the system ( C$ 543 )
&: Error when creating a characteristic for class &2 (&3) ( C$ 544 )
&: Unable to find suitable identifiers for reference specification ( C$ 545 )
Number of phrases assigned to phrase sets: & ( C$ 546 )
&: Number is incorrect: & ( C$ 547 )
&1: Could not write long text ( C$ 548 )
&1: Characteristic &2 in class &3 does not exist ( C$ 549 )
Entries were not correct ( C$ 550 )
Could not generate value file correctly ( C$ 551 )
Call of Microsoft Word terminated with error & ( C$ 552 )
DMS application type & is not known, document will be displayed ( C$ 553 )
Error during generation of value file ( C$ 554 )
Could not load value file to front end ( C$ 555 )
Could not load file to front end ( C$ 556 )
Neither your terminal & nor DEFAULT are contained in table TDWD ( C$ 557 )
No entry for data carrier type & and data carrier & in table TDWN ( C$ 558 )
Status of &1 documents converted ( C$ 559 )
Cannot upload file ( C$ 560 )
Path or file name of document &1 version &2 incorrect ( C$ 561 )
Cannot start Word ( C$ 562 )
Cannot display document &1 version &2 ( C$ 563 )
Could not copy template for Word document ( C$ 564 )
Document &1 with version &2 has a status that prevents changes ( C$ 565 )
Cannot find released report body ( C$ 566 )
Cannot find report body for the specified criteria ( C$ 567 )
No WWI document exists for document &1, version &2 ( C$ 568 )
The specification &1 was found for at least 2 specs from the file ( C$ 571 )
Error when triggering a WWI batch process ( C$ 573 )
A report template is already being edited or displayed at front end ( C$ 574 )
Incorrect WWI version installed on front end ( C$ 576 )
Error occurred adapting application objects (RGV) to template &1 &2 ( C$ 577 )
&1 template(s) were not deleted; they are being used ( C$ 578 )
Problem occurred during report generation; check the report log ( C$ 579 )
Inconsistent values could not be copied (&1) ( C$ 581 )
Switching property trees is not possible ( C$ 582 )
The characteristic GLP has the value &1 ( C$ 583 )
You cannot go to the previous/next specification ( C$ 584 )
Phrase set-to-characteristic assignment table is empty ( C$ 585 )
Value assignment type has values assigned by reference ( C$ 586 )
UoM & does not correspond to the dimension of the selected value assgmt ( C$ 592 )
Enter a valid unit of measurement ( C$ 593 )
First enter a value assignment and then save ( C$ 594 )
Enter a valid component type; &1 is invalid ( C$ 595 )
Enter a valid source; &1 is invalid ( C$ 596 )
Enter a valid user-defined text type; &1 is invalid ( C$ 597 )
Enter a valid authorization group; &1 is invalid ( C$ 598 )
Enter the key without the hyphen ('-') ( C$ 599 )
Change document management: & ( C$ 600 )
Report symbol types 11 - 14 and 99 may only be used by SAP ( C$ 601 )
Sort number & already exists ( C$ 602 )
Enter a valid value assignment type ( C$ 604 )
You cannot delete the value assignment type & ( C$ 608 )
No deletable value assignments exist for selected value assignment types ( C$ 612 )
User-defined text type &1 is not intended for this application ( C$ 616 )
Cust./material combination already exists for this value assign. instance ( C$ 620 )
For validity date &1 exist components not (yet) valid ( C$ 621 )
From-date and to-date have been set to the same value ( C$ 625 )
The representation day is the current date ( C$ 626 )
An error occurred in the information system ( C$ 632 )
You can only move entries within a property ( C$ 636 )
Cannot find identification listing & ( C$ 637 )
You have not selected a value assignment type ( C$ 640 )
Unable to find specifications ( C$ 641 )
Error during component search; unit &1 does not exist ( C$ 642 )
Parameter input not possible; value asst types specified in Customizing ( C$ 645 )
Output variant &1 &2 does not exist ( C$ 647 )
Error &1 calling output function &2 ( C$ 648 )
Template does not exist; specify template and version ( C$ 651 )
Report generation for specification & failed ( C$ 654 )
Unable to find generation variant & ( C$ 655 )
The specification you entered does not exist ( C$ 656 )
Error generating report request for specification <&> ( C$ 657 )
Error during generation of report body ( C$ 663 )
False document status ( C$ 664 )
Cannot create value file ( C$ 665 )
Cannot find original document ( C$ 666 )
Error when starting report generation ( C$ 667 )
Specification not found ( C$ 668 )
Cannot find generation variant ( C$ 669 )
Error when changing status of document <&1> for specification <&2> ( C$ 670 )
Error during report generation ( C$ 671 )
Generation and print job completed ( C$ 672 )
Report selection not unique ( C$ 673 )
Report request for specification <&> created successfully ( C$ 674 )
Error during generation of report body &1 for specification <&2> ( C$ 675 )
Your PC is not configured correctly for WWI ( C$ 676 )
Cannot change to status &(&) during dialog ( C$ 677 )
Cannot find document for report body ( C$ 678 )
Document &1 &2 was not generated correctly (exception '&3') ( C$ 679 )
Specification <&> has not been maintained for validity date & ( C$ 680 )
Found none or several report bodies for specification <&> ( C$ 681 )
Generation of report body & for specification <&> triggered successfully ( C$ 682 )
Error during report body processing for specification <&> ( C$ 683 )
Report body processing for specification <&> completed ( C$ 684 )
Error when transferring customer data for specification <&> ( C$ 685 )
Report shipping order for specification <&> was created successfully ( C$ 686 )
Report body for specification &1 does not have the status "released" ( C$ 687 )
Specify a language ( C$ 688 )
Cannot find log record ( C$ 689 )
No entry found in table TCGS1 ( C$ 690 )
Error during creation of parameter list for spool call ( C$ 691 )
Error during insertion in spool list ( C$ 692 )
Error during spool polling ( C$ 693 )
Incorrect WWI destination ( C$ 694 )
General error when accessing report body generation ( C$ 695 )
The status you entered does not exist ( C$ 696 )
Enter a status ( C$ 697 )
A report with this number and version already exists ( C$ 698 )
Cannot change status of document &1 version &2 ( C$ 699 )
Function & is not active in the system ( C$ 701 )
Unable to read interface of reference function & ( C$ 702 )
Unable to read interface of function & ( C$ 703 )
Function &: Import parameter & missing ( C$ 704 )
Function &: Import parameter & does not have the correct structure ( C$ 705 )
Function &: Import parameter & does not have the correct type ( C$ 706 )
Function &: Import parameter & has an incorrect change attribute ( C$ 707 )
Function &: Import parameter & does not have the correct type (pool) ( C$ 708 )
Function &: Invalid import parameter & ( C$ 709 )
Function &: No export parameter & ( C$ 710 )
Function &: Export parameter & does not have the correct structure ( C$ 711 )
Function &: Incorrect export parameter type & ( C$ 712 )
Function &: Incorrect export parameter type & (pool) ( C$ 713 )
Function &: No changing parameter & ( C$ 714 )
Function &: Changing parameter & does not have the correct structure ( C$ 715 )
Function &: Incorrect changing parameter type & ( C$ 716 )
Function &: Incorrect change attribute for changing parameter & ( C$ 717 )
Function &: Changing parameter & does not have the correct type (pool) ( C$ 718 )
Function &: Invalid changing parameter & ( C$ 719 )
Function &: No table parameter & ( C$ 720 )
Function &: The table parameter & does not have the correct structure ( C$ 721 )
Function &: Incorrect table parameter type & ( C$ 722 )
Function &: Incorrect table parameter type & (pool) ( C$ 723 )
Function &: Invalid table parameter & ( C$ 724 )
Conditions for blank compression are inconsistent ( C$ 725 )
Repeating group && contains symbols with different expansion fences ( C$ 726 )
Cannot assign application parameter && to a symbol ( C$ 727 )
Symbol group & is not allowed for symbol type & ( C$ 728 )
Symbol groups are not allowed for symbol type & ( C$ 729 )
Reference object & is not an active data dictionary table ( C$ 730 )
The reference object class type &, class & is not defined ( C$ 731 )
Table & does not contain field & ( C$ 732 )
Class &, class type & does not contain characteristic & ( C$ 733 )
No value assignment types allowed for symbol type & ( C$ 734 )
Symbol type & and reference parameter & require a value assignment type ( C$ 735 )
Value assignment type & is not defined in the system ( C$ 736 )
The class you specified is not consistent with the value assignment type ( C$ 737 )
Expansion fence & is not allowed for symbol type & ( C$ 738 )
Expansion mode & is not allowed for identifier tables ( C$ 739 )
This definition is not allowed for expansion mode & ( C$ 740 )
Expansion mode & is not allowed for phrase-related symbols ( C$ 741 )
Expansion parameter & is not compatible with expansion mode & ( C$ 742 )
Generation source & is not an active table ( C$ 743 )
Generation source & is not a class of class type & ( C$ 744 )
Generation source & is not a value assignment type ( C$ 745 )
Expansion time & is not allowed for source category & ( C$ 746 )
Generation sources of category & cannot be restricted ( C$ 747 )
Invalid combination of symbol type &, symbol group &, access parameter & ( C$ 751 )
You cannot specify tables or fields for access parameter & ( C$ 752 )
You cannot specify classes or characteristics for access parameter & ( C$ 753 )
You cannot specify value assignment types for access parameter & ( C$ 754 )
Symbols exported ( C$ 755 )
No structure file exists for the document you specified ( C$ 756 )
Specify an output medium ( C$ 757 )
Cannot assign parameter value (&) to a symbol ( C$ 759 )
Unable to write log record for document &1 version &2 ( C$ 760 )
Last version of document &1 not released; no new version possible ( C$ 761 )
There is no next status for status & ( C$ 762 )
Cannot find structure file for document & ( C$ 763 )
You cannot use expansion value & for expansion parameter & ( C$ 764 )
You cannot use an expansion value for expansion parameter & ( C$ 765 )
The mask may contain a maximum of & places behind the decimal point ( C$ 766 )
The mask must contain at least one place before the decimal point ( C$ 767 )
Unable to create template on database ( C$ 768 )
There is no status log for this report ( C$ 769 )
The report does not yet contain a document ( C$ 770 )
There is no path for temporary files on your front-end PC ( C$ 771 )
An error occurred when starting the display application ( C$ 772 )
The report does not contain parameter symbols ( C$ 773 )
Activity '&' could not be carried out for certain reports ( C$ 774 )
The status entered is not permitted as initial status ( C$ 775 )
Report version is not permitted ( C$ 776 )
Report status is not permitted ( C$ 777 )
Report may not be processed in this status ( C$ 778 )
No initiator was entered ( C$ 779 )
Unable to convert symbol & & in client & ( C$ 787 )
The system found symbols that could not be converted ( C$ 790 )
Error when deleting data records from database table &1 ( C$ 791 )
Error when deleting temporary table &1 with deletion status &2 ( C$ 795 )
Error when inserting data records into database table &1 ( C$ 797 )
Buffer: System error during locking (&1) ( C$ 801 )
Buffer: Non-processed lock combination & -> & ( C$ 802 )
Error in data interface between SD and EHS (&1) ( C$ 811 )
The check is run in packages with a maximum of &1 reports ( C$ 818 )
No appropriate WWI server was found for generating the document &1 ( C$ 821 )
An error occurred when creating the work process for WWI server &1 ( C$ 822 )
A communication error occurred in the RFC call for the WWI server &1 ( C$ 823 )
System error occurred during an RFC call of WWI server &1 ( C$ 824 )
Error on WWI server &1: Invalid job number for generation ( C$ 825 )
Error on WWI server &1: Writing the source document failed ( C$ 826 )
Error on WWI server &1: Writing the value file failed ( C$ 827 )
Error on WWI server &1: Another generation service is blocking Word ( C$ 828 )
Error on WWI server &1: &2 failed ( C$ 829 )
Error on WWI server &1: Results file not found ( C$ 830 )
Error on WWI server &1: Generated files not found ( C$ 831 )
Creating structure data has failed ( C$ 832 )
Saving document data has failed ( C$ 833 )
Generation error on WWI server &1 ( C$ 834 )
Error file : &1&2&3 ( C$ 835 )
No active WWI server was found for generating the document &1 ( C$ 836 )
Replacing the report is not possible ( C$ 852 )
No shipping authorization for report ( C$ 853 )
Report was not assigned a material ( C$ 854 )
No print parameters were entered ( C$ 856 )
Cannot find any & reports ( C$ 857 )
Reports exist for specification &, assignment not possible ( C$ 858 )
Report & & cannot be released ( C$ 859 )
Formatting &1 is not permitted for current output device ( C$ 860 )
Not necessary to enter a variant and a validity area ( C$ 862 )
Not necessary to enter both a variant and report category ( C$ 863 )
Several reports are blocked by other users, & not executed ( C$ 864 )
Formatting &3 is defined for communication &1 &2 ( C$ 865 )
No authorization for reports for specification & and variant & ( C$ 867 )
Template for variant & is in status '&', action is not possible ( C$ 868 )
Action '&' is not allowed for reports in status & ( C$ 869 )
No export authorization for report ( C$ 870 )
Some data missing for report comparison ( C$ 871 )
Some of the variants selected are used in reports ( C$ 872 )
Action '&' is not allowed for deleted reports ( C$ 875 )
Incorrect WWI application ( C$ 876 )
Worklist is already being generated (started from &1) ( C$ 881 )
It is not necessary to generate the worklist ( C$ 882 )
Enter a unique reference object ( C% 021 )
Correct the reference object ( C% 022 )
No measurement method & defined. ( C% 050 )
Enter values between 0 and & only ( C% 070 )
"Estimates" for percentage of completion is not allowed ( C% 071 )
Entry combination invalid, enter a correct combination. ( C% 101 )
Base field & invalid, enter a correct field. ( C% 150 )
Percentage of completion: invalid field type, enter a correct type. ( C% 151 )
You have defined too many fields with type & & ( C% 152 )
Condition type &1, appl &2 cannot be maintained for table &4 usage &3 ( C( 001 )
There is no entry in table &1 for the record with VARNUMH &2 ( C( 050 )
The newly assigned costing number is incorrect ( C+ 002 )
Material & not converted for the material ledger ( C+ 004 )
Manual creation of ML master data is not supported ( C+ 005 )
Currency type &1 not defined in valuation area &2 ( C+ 006 )
No master record exists for period &1 of fiscal year &2 ( C+ 007 )
No material ledger master data exist ( C+ 009 )
Material ledger master data already exist ( C+ 010 )
Material ledger type & does not exist ( C+ 011 )
Material ledger is not active in valuation area & ( C+ 012 )
Inconsistent data. No master data for the current period ( C+ 013 )
Material price determination & performed ( C+ 014 )
Material description for material &1 not available ( C+ 015 )
Material &1 &3 does not exist in valuation area &2 ( C+ 016 )
Explanation component material ledger not active in valuation area & ( C+ 018 )
No material ledger header data found for material &1 ( C+ 019 )
Valuation area & not yet productive with material ledger ( C+ 020 )
Component split from &1 &2 corrected. Check the results ( C+ 022 )
Valuation area & unable to be locked ( C+ 023 )
No texts for currency types in logon language found ( C+ 024 )
Currency settings in T169P are incorrect for company code &1 ( C+ 025 )
No data found for period and year ( C+ 026 )
Price units for & & in val. area & unchanged in foreign currencies ( C+ 036 )
Price would be 0. Change in price unit not possible ( C+ 038 )
Material ledger currencies were changed ( C+ 039 )
Currency was not defined at production startup ( C+ 040 )
Multilevel price variances &1 in currency &2 amount to &3% ( C+ 041 )
Comparison price &2, new price &3, change &4 %, currency &1 ( C+ 042 )
Material ledger inconsistencies found for &1 &2 in &3 ( C+ 045 )
Price no longer zero after price determination ( C+ 047 )
Valuation of material &1 &2 in valuation area &3 inconsistent ( C+ 048 )
Field ACCIT-MLMAA incorrectly filled ( C+ 049 )
Different unit of measure for material & in valuation area & ( C+ 051 )
Valuation of material &1 &2 in valuation area &3 would be inconsistent ( C+ 052 )
You are not authorized to release a cost estimate ( C+ 053 )
You have no authorization for valuation area & ( C+ 054 )
No authorization to work with material type & ( C+ 055 )
Field overflow during price calculation ( C+ 056 )
Please enter a valuation type ( C+ 058 )
No valuation types found for material &1 ( C+ 059 )
You are not authorized to start up production ( C+ 060 )
Material &1 is managed without a valuation view ( C+ 062 )
Material &1 is not carried in the material ledger ( C+ 063 )
Accounting view for material &1 &2 in &3 is not maintained ( C+ 064 )
Error reading material ledger header record ( C+ 065 )
New price determination &1 = previous price determination &2 ( C+ 067 )
Internal error: Price determination &1 cannot be processed ( C+ 070 )
Material update structure for valuation area &1 not found ( C+ 071 )
Error reading price table CKMLPR for material &1 ( C+ 072 )
Error reading material ledger period records ( C+ 073 )
Error reading the material ledger currency record ( C+ 074 )
Application: Material Ledger, Client: &1, Valuation area &2 ( C+ 078 )
The production indicator could not be deleted ( C+ 081 )
No authorization to execute the conversion ( C+ 084 )
The material ledger is productive in valuation area & ( C+ 085 )
Valuation area & was not converted ( C+ 086 )
Material ledger is already productive in valuation area &2 ( C+ 087 )
Conflict: Material ledger in valuation area &2 with profile &1 ( C+ 088 )
Conflict: material ledger in company code &4 with profile &1 ( C+ 089 )
Currency types and valuations in material ledger not constant in CO ( C+ 091 )
The material ledger is not supported in a SAP Retail system ( C+ 093 )
Valuation area &1 in client &2 contains no productive indicator ( C+ 094 )
Function not available ( C+ 095 )
Material ledger closing entry & was saved ( C+ 096 )
Material &1 is not available ( C+ 097 )
Internal error in FORM/FUNCTION &1 in position &2 with RC &3 ( C+ 099 )
Valuation area & is not maintained fully ( C+ 100 )
Account determination not maintained ( C+ 103 )
Material &1 &2 blocked by another user ( C+ 105 )
Account determination for material &3 &2 not maintained ( C+ 106 )
Error while blocking material &3 &2 in valuation area &1 ( C+ 107 )
Reference to material could not be found ( C+ 109 )
No period record for material ledger found ( C+ 115 )
Table entry for company code & missing ( C+ 116 )
Table entry for company code & missing ( C+ 117 )
Table entry for transaction code & missing ( C+ 118 )
Table entry for transaction code & missing ( C+ 119 )
No ML doc. found for mat.doc. &1, &2, item &3: Documents are translated ( C+ 120 )
Price not determined for material & & (negative price) ( C+ 121 )
& & & : field overflow during currency translation to & ( C+ 123 )
Please determine the material price with the appropriate function. ( C+ 130 )
The price for material &1 &2 will be negative ( C+ 131 )
Caution: Only stock materials will be displayed -> Long text ( C+ 132 )
No authorization to execute in plant & ( C+ 133 )
No authorization to execute in company code & ( C+ 134 )
The material's price changes in currency/valuation &1 by &4 % / &2% ( C+ 139 )
&1 materials have no period records in period &2 ( C+ 155 )
&1 material has no period records in period &2 ( C+ 156 )
Text module & is not available in language & ---> Long Text ( C+ 159 )
Client &1, number range object &2: Insufficient free numbers available ( C+ 162 )
Number range object &1 not maintained in client &2 ( C+ 163 )
Information for index &1 in table &2 could not be read ( C+ 165 )
Attributes for index &1 in table &2 could not be set ( C+ 166 )
Secondary index &1 from table &2 could not be activated ( C+ 167 )
Secondary index &1 from table &2 could not be created ( C+ 168 )
Error in table &4: No entry for company code &1 &2 &3 ( C+ 169 )
This function cannot be performed in company code &1 ( C+ 170 )
Error &1 while determining the currency types for &2 &3 ( C+ 171 )
Problem with error collector initialization ( C+ 203 )
Error collector not active ( C+ 204 )
No valuation area found for plant & ( C+ 205 )
Negative price in one or more currencies. 0 will be set ( C+ 208 )
Negative price activated. Posting not allowed ( C+ 209 )
Only materials with price determination indicator 1 or 2 will be settled. ( C+ 211 )
Price changes are not permitted for all materials ( C+ 212 )
The material ledger can be reconciled with FI in valuation area &1 ( C+ 214 )
Table &1 is not a valid input value here. ( C+ 216 )
Material Ledger is not activated for the valuation area &1 ( C+ 243 )
New moving average price (MAP) logic is not activated ( C+ 244 )
Please synchronize Material Ledger currency settings ( C+ 245 )
Material &1 does not have currency type &3 in period &2 ( C+ 250 )
Material &1 in period &3 already exists for currency type &4 ( C+ 255 )
Price control can not be changed in the previous year ( C+ 256 )
Price control can not be changed in the previous period ( C+ 257 )
No unique Costing run for accounting principle &1 ( C+ 261 )
No range of periods possible for company codes &1 &2 ( C+ 262 )
Material ledger not active in plant & ( C+ 302 )
Material ledger already productive in plant & ( C+ 303 )
No material ledger type assigned to valuation area & ( C+ 304 )
Exchange rate type & not defined ( C+ 305 )
Error while issuing costing numbers ( C+ 306 )
Error updating material ledger period records ( C+ 308 )
Error updating material ledger header records ( C+ 309 )
Error updating valuation data for material & ( C+ 310 )
Valuation area could not be flagged internally as in production ( C+ 311 )
Error updating material ledger administrative data ( C+ 312 )
Balance on acct &1, CoCd/BusArea &2 cannot be explained by subledger ( C+ 313 )
Document type could not be determined ( C+ 314 )
Valuation area cannot be put into production ( C+ 315 )
Material ledger already in production in valuation area & ( C+ 317 )
Material ledger not active in valuation area & ( C+ 318 )
Error evaluating stock account: &1 ( C+ 320 )
Error updating material ledger currency entries ( C+ 321 )
Material &1 &2 contains no costing number in valuation area &3 ( C+ 322 )
Threshold value for warning message smaller than for error message ( C+ 323 )
Company code & can be put into production for material ledger ( C+ 325 )
If material ledger planned for further valuation areas -> see long text ( C+ 326 )
No company code found for valuation area & ( C+ 327 )
No plants found for valuation area & ( C+ 328 )
Production startup only possible at company code level &2 (see long text) ( C+ 329 )
Differing material ledger currencies in company code &1 ( C+ 332 )
Functionality required for deactivating Material Ledger missing ( C+ 335 )
Please refer to the long text ( C+ 336 )
Material ledger not active in valuation area & ( C+ 337 )
Valuation area &1 is already productive in the material ledger ( C+ 338 )
More than 3 currencies / valuations are assigned to valuation area &1 ( C+ 339 )
Plant & can be set to productive for the material ledger ( C+ 340 )
The material ledger is not set to productive in valuation area & ( C+ 341 )
Company code &1 was already reconciled ( C+ 342 )
Adjustment account &1 does not have the required attributes ( C+ 352 )
Plant &1 was already productive in Release &2 -> conversion program ( C+ 358 )
Material ledger productive in valuation area &1 ( C+ 359 )
Material ledger is not active and binding in company code & ( C+ 361 )
Material ledger is already productive in company code & ( C+ 362 )
Company code &1 was already productive in release &2 ->Conversion program ( C+ 363 )
Company code & can be put into production for material ledger ( C+ 365 )
Either only a sales document, WBS element or vendor number ( C+ 374 )
Enter either the sales document/item or WBS element ( C+ 375 )
Enter either the sales document/item or vendor number ( C+ 376 )
Enter either only WBS element or only vendor number ( C+ 377 )
Select the type of special stock ( C+ 378 )
Ledger & does not exist in company &; inconsistency with ML setup ( C+ 391 )
Rules table is defective, please maintain rules manually ( C+ 404 )
Marking date is in the past ( C+ 406 )
Currencies with the rule "No changes" are not displayed ( C+ 408 )
Missing connection of material &1 in plant &2 to the material ledger ( C+ 470 )
Error updating in table &1 ( C+ 503 )
ML currencies missing in the MLBECR for the EKBE-&1 (&2/&3) ( C+ 507 )
ML currencies missing in the MLBECR for the EKBZ-&1 (&2/&3) ( C+ 508 )
Internal error in program &1 in position &2 (RC = &3) ( C+ 509 )
Process category could not be determined ( C+ 510 )
No material update structure is assigned to valuation area &1 ( C+ 511 )
No entry in table CKMLMV009 for process type &1. ( C+ 512 )
Check settings for material update structure &1 ( C+ 513 )
Internal error in function module &1 ( C+ 514 )
Error in function module CKMW_CREATE_PO_HISTORY in table &1 ( C+ 515 )
Error in function module CKMO_POST_ORDER_HISTORY in table &1 ( C+ 516 )
Wrong currency for currency type &1: Currency &2 instead of &3 ( C+ 517 )
Document header missing for the material price determination ( C+ 602 )
Number assignment for ML document is incorrect ( C+ 606 )
Document header missing for the price change ( C+ 607 )
Document not found ( C+ 608 )
Transaction type does not exist ( C+ 609 )
No currency key for currency type & could be found ( C+ 612 )
Material Ledger: inconsistency in buffer table & ( C+ 617 )
You are not authorized to use currency or valuation & ( C+ 618 )
Enter only price change documents ( C+ 619 )
Please check number range interval (approaching interval end) ( C+ 620 )
Please check number range interval (end of interval reached) ( C+ 621 )
&2 materials could not be archived in valuation area &1 ( C+ 627 )
New table records for material &1 &2 already exist ( C+ 628 )
No material update structure has been assigned to valuation area & ( C+ 629 )
Number range interval for the material ledger document is incorrect ( C+ 630 )
Error in account maintenance in valuation area & ( C+ 632 )
Current currency settings in valuation area & differ from the archive ( C+ 633 )
Not all documents selected were archived ( C+ 636 )
No automatic translation into foreign currency occurred ( C+ 637 )
Negative prices! Display fields affected are set to 999999999.99 ( C+ 660 )
No period records were found for material & valuation type & ( C+ 700 )
Data in internal interface not able to be processed ( C+ 701 )
A system error occurred during the blocking procedure ( C+ 702 )
Material &1 &2 in valuation area &3 has inconsistant ML data ( C+ 704 )
Price for material &1 determined ( C+ 706 )
Cumulated quantity is zero, therefore the valuation will not be changed. ( C+ 707 )
Material &1 locked by user &2: price determination not possible ( C+ 710 )
Error reading master data for material &1 &2 in valuation area &3 ( C+ 711 )
You cannot perform price determination in period &1 / &2 ( C+ 712 )
Buffer for material &1 &2 could not be updated ( C+ 713 )
You are not allowed to execute closing entries in period &1 / &2 ( C+ 715 )
You can not reverse closing entries in period &1 /&2 ( C+ 716 )
No data is avaliable for material & in period &. ( C+ 721 )
No data is avaliable for material & in period &. ( C+ 722 )
Periodic unit price of the material will be negative ( C+ 723 )
Internal error: not all periods were read from the buffer ( C+ 724 )
Periodic unit price will be zero in currency/valuation &1 ( C+ 725 )
Consumption for newly created materials is valuated with standard price ( C+ 726 )
The material has been changed since the beginning of the iteration ( C+ 729 )
Inventory values exist for valuation area &, S/4 ML migration required ( C+ 741 )
No apportionment structure found. Costs are copied over completely ( C+ 750 )
No apportionment structure found. Costs were not copied ( C+ 751 )
Input quantities are reduced to avoid negative price in the proc. alt. ( C+ 752 )
Input quantities reduced to reduce price variances in the procurement alt ( C+ 753 )
Price of procurement alternative &1 is negative ( C+ 754 )
Price of procurement alt. &4 changes in currency/valuation &1 by &2 % ( C+ 755 )
Material price determination performed with reduced actual BOM ( C+ 756 )
Checking against the V price in the previous period is not possible ( C+ 757 )
Data in internal interface not able to be processed ( C+ 801 )
Updating values for material &1 &2 is not possible ( C+ 803 )
Price determination is only possible for materials with price control 'S' ( C+ 804 )
Carry out period-end closing for material &1 &2 in the previous period ( C+ 805 )
Closing entry for material &1 &2 already made ( C+ 806 )
The closing entry for material &1 &2 is not allowed ( C+ 807 )
Closing entry for material &1 &2 must be canceled in following period ( C+ 808 )
Closing entry for material &1 &2 not possible ( C+ 809 )
Closing entry for material &1 &2 must be canceled in following period ( C+ 810 )
Price changes for material &1 &2 is not possible ( C+ 811 )
Changing master data is not allowed for material &1 &2 ( C+ 812 )
No Authorization to grant permission for valuation area & ( C+ 813 )
No authorization for material type & ( C+ 814 )
First determine prices (1-lvl) for input material &1 &2 valuation area &3 ( C+ 815 )
First determine price (m-lvl) for input material &1 &2, valuation area &3 ( C+ 816 )
First determine price (1-lvl) for material &1 &2, valuation area &3 ( C+ 817 )
Multi-level price determination is not possible ( C+ 818 )
Price change not possible for material &1 &2 in the previous month ( C+ 819 )
Closing entry for material &1 &2 already made ( C+ 820 )
Closing entry for material &1 &2 already reversed ( C+ 821 )
First reverse the closing entry for input material &1 &2 val.area &3 ( C+ 822 )
First reverse closing entries for material &1 &2 valuation area &3 ( C+ 823 )
Perform the selection and sequencing again ( C+ 824 )
Price determination for period &1 / &2 was already allowed ( C+ 825 )
Closing entries for period &1 / &2 were already allowed ( C+ 828 )
You must first allow price determination for period &1 / &2 ( C+ 830 )
You must first allow closing entries for period &1 / &2 ( C+ 831 )
First determine material prices before performing closing entries ( C+ 832 )
Execute WIP price determination for material &1 &2 first ( C+ 837 )
No WIP was determined for material &1 &2 in this period ( C+ 838 )
Determine price for material &1 &2 first ( C+ 839 )
Closing entry for material &1 &2 already made ( C+ 840 )
Price control &1 is mandatory for material type &2 ( C+ 873 )
Price determination IDs are different: MBEW = &1, CKMLHD = &2 ( C+ 874 )
Changing the valuation type may cause problems. See long text ( C+ 875 )
Enter a company code ( C+ 876 )
After activation of Actual Costing in Val. Area &1 FCML4H_STARTUP needed ( C+ 895 )
& is not a list name ( C- 006 )
List name & still has objects ( C- 007 )
& is not a profile ( C- 015 )
Profile & still has display blocks assigned to it ( C- 016 )
Delete assignment to list name & first ( C- 017 )
& is not a maximum block ( C- 025 )
Maximum block & must be assigned to a list name ( C- 026 )
Maximum block & is still used in display block & ( C- 027 )
Delete assignment to list name & first ( C- 028 )
Buffer for profile & reset ( C- 030 )
Delete assignment to profile/display block & first ( C- 031 )
& is not a display block ( C- 035 )
Display block & still has objects ( C- 036 )
List object & is already being processed ( C- 037 )
List object & has not yet been created ( C- 038 )
List object & has already been created ( C- 039 )
This object contains invalid characters ( C- 041 )
You have no authorization for & ( C- 042 )
Texts are displayed in default language & ( C- 043 )
Maximum block does not have any fields; enter a table ( C- 044 )
Display block does not have any fields; enter a maximum block ( C- 046 )
Not all fields are defined as characteristics ( C- 047 )
& already assigned to & ( C- 048 )
Maximum block and profile have different list names ( C- 049 )
There are maximum blocks that do not belong to the list name ( C- 050 )
List object & does not have a predecessor or successor ( C- 052 )
Block name & is already used in a maximum block of this list name ( C- 053 )
Standard objects must start with SAP.. ( C- 054 )
Non-standard objects cannot start with SAP.. ( C- 055 )
List name & does not contain a standard profile ( C- 056 )
List name & does not contain a standard maximum block ( C- 057 )
List name & does not contain a standard display block ( C- 058 )
List name & is not a standard list name ( C- 059 )
Characteristic & does not exist in maximum block ( C- 060 )
You cannot maintain standard objects ( C- 061 )
Caution transporting customer objects: see long text! ( C- 062 )
Error during data exchange with optimization system &1 ( C/ 020 )
External and internal work center keys entered ( C/ 023 )
External work center key &1 could not be determined ( C/ 024 )
Incorrect number of fields for entry of operation dates ( C/ 026 )
Fields for date and time do not agree ( C/ 027 )
Incorrect combination of fields for entry of operation dates ( C/ 028 )
Changes to operation &1 not possible (order &2, sequence &3) ( C/ 029 )
Invalid value for packet size (download). Standard value will be used ( C/ 068 )
Data changes cannot be downloaded due to contradictory Customizing ( C/ 069 )
Invalid value for number of IDOCs per LUW (download). Set standard value ( C/ 070 )
Message does not contain an inspection lot number ( C0 100 )
Message does not contain an operation or phase number ( C0 101 )
Message does not contain a characteristic number ( C0 102 )
A message with no. & has already been posted ( C0 103 )
An inspection lot with no. & does not exist ( C0 104 )
- Assign a characteristic to the process instruction ( C0 200 )
- Assign characteristic PPPI_NOTE after PPPI_BUTTON_TEXT ( C0 201 )
- Only use characteristics defined for process parameters ( C0 202 )
- Assign characteristic PPPI_NOTE after PPPI_BUTTON_TEXT ( C0 203 )
- Assign all required characteristics to process instruction ( C0 204 )
- Assign PPPI_VARIABLE before the corresponding mess. characteristic ( C0 205 )
- Assign PPPI_CALCULATION_FORMULA after PPPI_CALCULATED_VALUE ( C0 206 )
- Define the value to be transferred immediately after & & ( C0 207 )
- Define the variable for the parameter value immediately after & & ( C0 208 )
- Define a value or variable for each parameter ( C0 209 )
- Assign PPPI_EXTERNAL_VALUE after PPPI_DEFAULT_VARIABLE ( C0 210 )
- Characteristic & & cannot be used in this position ( C0 211 )
- Enter a correct value for characteristic & & ( C0 212 )
- Assign a value to characteristic & & ( C0 213 )
- Assign PPPP_INPUT_REQUEST before PPPI_REQUESTED_VALUE ( C0 214 )
- Assign the function to be called (PPPI_FUNCTION_NAME) ( C0 215 )
- Assign PPPI_DEFAULT_VARIABLE before PPPI_EXTERNAL_VALUE ( C0 216 )
- Assign PPPI_VARIABLE before the corresponding mess. characteristic ( C0 217 )
- Assign PPPI_INPUT_REQUEST before & & ( C0 218 )
- Assign PPPI_VALIDATION_FORMULA before PPPI_TEXT_FOR_INVALID_INPUT ( C0 219 )
- Assign PPPI_VALIDATION_FORMULA before PPPI_TEXT_FOR_INVALID_INPUT ( C0 220 )
- Assign PPPI_MESSAGE_CATEGORY only once (simple data request) ( C0 221 )
- PPPI_DEFAULT_VARIABLE is not defined for manual value assignment ( C0 222 )
- PPPI_EXTERNAL_VALUE is not defined for manual value assignment ( C0 223 )
- Char. & & has not been defined for val. assigment using variables ( C0 224 )
- Characteristic & & cannot be used in this position ( C0 225 )
- Assign PPPI_INPUT_REQUEST before & & ( C0 226 )
- Assign PPPI_INPUT_REQUEST and PPPI_CALCULATED_VALUE before & & ( C0 227 )
- Charact. & & cannot be used after PPPI_VARIABLE ( C0 228 )
- Assign PPPI_INPUT_REQUEST before the corresponding parameter ( C0 229 )
- Assign charact. of preceding mess. cat. before & & ( C0 230 )
- Characteristic & & cannot be used in this position ( C0 231 )
- Define output value ( C0 232 )
- Assign PPPI_VARIABLE before the corresponding mess. characteristic ( C0 233 )
- Assign PPPI_ACCEPT_INVALID_INPUT after PPPI-VALIDATION_FORMULA ( C0 234 )
- Assign PPPI_ACCEPT_INVALID_INPUT after PPPI_TEXT_FOR_INVALID_INPUT ( C0 235 )
- Define column header for value to be displayed ( C0 236 )
- Characteristic & & cannot be used in this position ( C0 237 )
- Process instructions of type 0 are not supported ( C0 238 )
- Error in proc. instr. type & for cntrl. rec. dest. & ( C0 250 )
PIs for control recipe destinations of type & will not be checked ( C0 251 )
You cannot use process message subscriptions for PI sheets ( C0 252 )
Characteristic &2 does not exist in client &1 ( C0 253 )
Process instr. type &1 not intended for use in ctrl recipe dest. type &2 ( C0 254 )
- Assign a value to characteristic & & ( C0 301 )
- Charact. & &: Assign message category ( C0 302 )
- Charact. & &: Message category & is not defined ( C0 303 )
- Charact. & &: No characteristics assigned to message cat. & ( C0 304 )
- Assign required characteristic &2 to message category &1 ( C0 305 )
- Characteristic & & cannot be used in this position ( C0 306 )
- Charact. & &: Assign a variable ( C0 307 )
- Charact. &3 &2: Define variable &1 first ( C0 308 )
- Charact. & &: Assign variable name ( C0 309 )
- Charact.& &: Choose a unique variable name ( C0 310 )
- Charact.& &: Maintain maximum formula length of eight characteristics ( C0 311 )
- Charact.& &: Error in formula "&" ( C0 312 )
- Charact.& &: Enter larger value than for PPPI_MINIMUM_TABLE_SIZE ( C0 313 )
- Charact.& &: Enter smaller value than for PPPI_MAXIMUM_TABLE_SIZE ( C0 314 )
- Charact.& &: Assign function name ( C0 315 )
- Charact.& &: Function module & expecting unallowed tables ( C0 316 )
- Charact.& &: Error in function & ( C0 317 )
- Charact.& &: Assign name of existing function ( C0 318 )
- Charact.& &: Assign valid function name ( C0 319 )
- Characteristic & & cannot be used in this position ( C0 321 )
- Characteristic & & cannot be used in this position ( C0 322 )
- Error when assigning interface parameter & ( C0 323 )
- Error when assigning interface parameter & ( C0 324 )
- Error when assigning interface parameter & ( C0 325 )
- Charact.& &: Assign numeric characteristic ( C0 326 )
- Charact.& &: Assign message characteristic ( C0 327 )
- Charact.& &: & does not belong to mess. category & ( C0 328 )
- Charact.& &: Val. assignment type for & not permitted ( C0 329 )
- Complete settings for parameter & ( C0 330 )
- Complete settings for parameter & ( C0 331 )
- Complete settings for parameter & ( C0 332 )
- Charact.& &: Parameter & already assigned ( C0 333 )
- Charact.& &: Parameter & already assigned ( C0 334 )
- Charact.& &: Parameter & already assigned ( C0 335 )
- Specify the type of data request (&) ( C0 336 )
- Assign a message category (&) ( C0 337 )
- Assign a message category (&) ( C0 338 )
- Charact.& &: Error in function & ( C0 339 )
- Assign function to be called (&) ( C0 340 )
- Charact.&1 : Define requested characteristic for message category (&3) ( C0 341 )
- Characteristic & & cannot be used in this position ( C0 342 )
- Only define message characteristics as output values ( C0 343 )
Unable to call up PI sheet & ( C0 400 )
Error in the definition of the overview variant ( C0 405 )
PI sheet status "&" is not defined ( C0 500 )
PI sheet cannot be displayed due to its status (&) ( C0 501 )
Error when transferring the control recipe data ( C0 502 )
The PI sheet cannot be maintained due to its status (&) ( C0 503 )
Error when transferring the control recipe data ( C0 504 )
You cannot use this transaction to access browser-based PI sheets ( C0 505 )
Batch determination /check not possible: reservation data is missing ( C0 540 )
Batch determination/check not possible: material quantity is missing ( C0 541 )
Batch determination/check: you have not entered a unit of measure ( C0 542 )
System error: No batch determination/check carried out ( C0 543 )
Batch determination/check not possible: Input field for batch is missing ( C0 544 )
Batch determination: Not all selected batches may be transferred ( C0 546 )
No characteristics assigned to process instruction & in phase & ( C0 547 )
Message for process instruction & in phase & cannot be created ( C0 548 )
Batch number is assigned within QM, not in the PI sheet ( C0 549 )
System error during number assignment (message ID) ( C0 550 )
Message no. &: Message header cannot be found ( C0 551 )
No message characteristics found for message cat. & ( C0 552 )
PI sheet & has been set to "complete" ( C0 554 )
Assign value to required characteristic & ( C0 556 )
Message category & is not defined ( C0 557 )
Assign value to required characteristic & ( C0 558 )
Message no. &: Message header cannot be found ( C0 559 )
No object selected, or the processing type is not valid for the object ( C0 560 )
System error: Process instruction & in phase & not found ( C0 561 )
The text could not been saved ( C0 563 )
Maintain process instruction no. & for phase & ( C0 564 )
PI sheet has status "complete": Display only ( C0 565 )
PI sheet does not exist or it has not yet been sent ( C0 566 )
Please report all data first ( C0 567 )
System error: Problems with message number range ( C0 568 )
Message has been created ( C0 569 )
Status of PI sheet & has been set to "technically complete" ( C0 570 )
Status "technically complete" has been revoked ( C0 571 )
Message not found ( C0 572 )
System error: Message not found ( C0 573 )
Change in status cannot be reported ( C0 575 )
Required message characteristic missing in proc. instruction &, phase & ( C0 576 )
System error when accessing the PI sheet (during locking) ( C0 577 )
System error when creating or maintaining the message ( C0 578 )
System error: Message not found ( C0 579 )
Warning triggered, but no text defined for warning ( C0 582 )
Select control instruction first ( C0 583 )
PI sheet & is blocked by another user ( C0 584 )
System error when generating the comment sheet ( C0 586 )
Complete the process step first ( C0 587 )
System error: The text no longer exists ( C0 592 )
System error when assigning text name ( C0 593 )
Phase &3, proc. instr. &4: Enter allowed value for characteristic &2 ( C0 595 )
Phase &, process instruction &: Formula too long ( C0 599 )
Phase &, instr. &: Division by 0 in formula & ( C0 600 )
Phase &, instr. &: Error during exponentiation in formula & ( C0 601 )
Phase &, instr. &: Invalid arithmetic expression in formula & ( C0 603 )
Phase &, instr. &: Error when taking a logarithm in formula & ( C0 604 )
Phase &, instr. &: Invalid parameter in formula & ( C0 605 )
Phase &, instr. &: Error when taking a root in formula & ( C0 606 )
Phase &, instr. &: No formula definition found ( C0 608 )
Phase &, instr. &: Value missing for the calculation of formula & ( C0 609 )
Error in validation rule: phase &, instr. &, char. & ( C0 610 )
Message category missing in phase &, proc. instruction & ( C0 611 )
Automatic value assignment not possible with characteristic & ( C0 612 )
Characteristic & not found: phase &, instr. &, char. & ( C0 613 )
Invalid type of data request (&): phase &, instr. & ( C0 614 )
Charact. & is not allowed here: phase &, instr. &, charact. & ( C0 615 )
Process instruction not active: Maintenance not possible ( C0 620 )
No process instruction selected or function not possible ( C0 622 )
Phase &, proc. instruction &: Error in formula & ( C0 624 )
You do not have a display authorization for plant & , address & ( C0 625 )
You do not have a delete authorization for plant &, address & ( C0 626 )
You do not have the authorization to delete PI sheets ( C0 627 )
You do not have a maintenance authorization for plant &, address & ( C0 628 )
You do not have a change authorization for plant & address & ( C0 629 )
You do not have an archiving authorization for plant & address & ( C0 630 )
Message category & in phase &, process instruction & not defined ( C0 631 )
Error when editing the archiving/print parameters ( C0 632 )
You do not have the authorization to archive PI sheets ( C0 634 )
You are not authorized to create messages ( C0 635 )
Comment sheet for the PI sheet could not be read ( C0 636 )
Text for phase &, instr. & could not be read ( C0 637 )
You do not have the authorization to create messages in plant & ( C0 638 )
Creation of long texts in tables is not permitted ( C0 639 )
Please specify an operation/a phase in proc. instr. & for phase & ( C0 640 )
Processing of inspection characteristics in simulation is not possible ( C0 642 )
Current position: phase &, instruction & ( C0 643 )
Signature missing: Data for the processing step cannot be reported ( C0 644 )
PI sheet set to "technically complete" ( C0 646 )
Changing parameter & is not defined ( C0 647 )
Changing parameter & is missing in the function call ( C0 648 )
Function name missing in dyn. function call: phase & instr. & ( C0 649 )
Import parameter & missing in function call ( C0 650 )
Export parameter & missing in function call ( C0 651 )
Function module &: Invalid table parameters expected ( C0 652 )
Invalid name of function module & to be called ( C0 654 )
Called function module & is not defined ( C0 655 )
System error when accessing function module & ( C0 656 )
Export parameter & is not defined ( C0 657 )
Import parameter & is not defined ( C0 658 )
Variable & is not defined ( C0 659 )
Invalid characteristic sequence in function call (charact. no. &) ( C0 660 )
Invalid use of characteristic in function call (charact. no. &) ( C0 661 )
Characteristic no. & is invalid for this process instruction ( C0 662 )
Called function & has triggered exception & ( C0 663 )
Function cannot be carried out now; try again later ( C0 664 )
Parameter & has been defined twice ( C0 665 )
Error in definition of process instruction ( C0 666 )
Invalid definition for table ( C0 667 )
Maintain the headings of characteristic & ( C0 668 )
Characteristic not defined for long text assignment ( C0 669 )
PI sheet & is blocked by another user ( C0 670 )
System error: PI sheet & could not be locked ( C0 671 )
Internal error while accessing a digital signature ( C0 673 )
You are not authorized to set the PI sheet to "Technically complete" ( C0 674 )
Phase &, proc. instr. &: & is greater than & ( C0 675 )
Invalid use of global variable &1 ( C0 676 )
You may not delete PI sheet &1 ( C0 677 )
System error when deleting browser-based PI sheets ( C0 678 )
Assigned message numbers are within the critical range ( C0 690 )
The last message number within the number range has been assigned ( C0 691 )
There are more message numbers required than left in number range ( C0 692 )
Phase &, instruction &: No variable defined for characteristic & ( C0 695 )
Phase &, instruction &: Variable & is not defined ( C0 696 )
Phase &, instruction &: No value could be assigned to charact. & ( C0 697 )
System error: message cannot be created ( C0 699 )
You have not entered a signature: Your entry is rejected ( C0 700 )
No authorization for entering the signature: Entry rejected ( C0 701 )
User could not be identified: Entry is rejected ( C0 702 )
Message category & is not defined ( C0 703 )
System cannot continue processing ( C0 705 )
Unable to display message(s) ( C0 706 )
The text could not be edited ( C0 707 )
The text could not be read ( C0 708 )
System could not scroll ( C0 709 )
System error: Value assignment in display mode ( C0 711 )
System error: Characteristic not found ( C0 712 )
System error: Characteristic is locked ( C0 713 )
System error: internal error when setting the characteristic value ( C0 714 )
Multiple value assignment not possible with this characteristic ( C0 715 )
Invalid value ( C0 716 )
System error: Characteristic cannot be selected ( C0 717 )
System error when deleting a characteristic value ( C0 718 )
System error: Value assignment terminated ( C0 719 )
System error: No characteristics intended for processing ( C0 720 )
Function may not be called in display mode ( C0 721 )
Confirmation recording impossible; display only ( C0 722 )
Unable to find status object & for order & ( C0 723 )
Function module & not active ( C0 724 )
Object characteristic "&1" not allowed - message is not created ( C0 725 )
&1 of &2 entries you have selected were deleted ( C0 754 )
Maximum number of selected entries was reached ( C0 755 )
Selection range was restricted to & PI sheets ( C0 757 )
Selection range restricted to & entries. No PI sheet selected ( C0 758 )
Max. number of orders exceeded. Restrict your selection ( C0 759 )
- Characteristic & not created or not released ( C0 800 )
You cannot enter a long text for this characteristic ( C0 802 )
You cannot delete message characteristics ( C0 803 )
Select a group ( C0 804 )
Select a message category to continue processing ( C0 806 )
Enter a text for each entry ( C0 809 )
Assign the unit of measure to one characteristic only ( C0 813 )
Internal error when accessing the characteristic data ( C0 814 )
Further processing not possible (contact system administrator) ( C0 815 )
Further processing not possible (contact system administrator) ( C0 816 )
PI assistant does not support process instruction type & ( C0 817 )
Text exceeds field length. Text is truncated ( C0 818 )
Internal error when executing the function ( C0 819 )
Internal error: long text not found ( C0 820 )
Only use function modules without table parameters ( C0 823 )
Function module & not active ( C0 824 )
Internal error when converting the characteristic overview ( C0 825 )
Internal error when calling the error log ( C0 826 )
Field not long enough to accommodate entire text symbol ( C0 828 )
Output value of characteristic was adjusted ( C0 829 )
Default value of input characteristic adjusted ( C0 830 )
Variable name "&" already used in the process instruction ( C0 833 )
Only use characeteristics whose value is assigned autom. in the order ( C0 834 )
- Text symbol &1: Invalid reference to control characteristic &2 ( C0 840 )
- Unable to assign a characteristic to text symbol & ( C0 841 )
- Unable to find characteristic &2 assigned to text symbol &1 ( C0 842 )
- Repeated data request: Define at least one input value ( C0 845 )
- Assign a variable to parameter & ( C0 846 )
- Assign a value to the required parameter & ( C0 847 )
- You cannot use characteristic &1 for process instructions of type &2 ( C0 848 )
- ==> All connected characteristics are ignored ( C0 849 )
- No characteristics assigned to characteristics group & ( C0 850 )
- No description for characteristic &1 in language &2 ( C0 851 )
- Unable to assign characteristic &. Characteristic is ignored. ( C0 852 )
- Function name missing -> Unable to assign parameter & ( C0 853 )
- You cannot use characteristic & here. Characteristic is ignored. ( C0 854 )
- Internal error: Unknown data type allocated to parameter & ( C0 855 )
- Error occurred when converting formula: unable to split formula ( C0 856 )
- Enter a message category. Otherwise, characteristics will be lost ( C0 857 )
- Characteristic & is not created/released. Characteristic is ignored. ( C0 858 )
- You cannot use characteristic &1 as a text symbol ( C0 859 )
- A long text has been assigned to char. &. Long texts are not supported ( C0 860 )
- Unable to find message characteristics for message category & ( C0 861 )
- Required message characteristic & has no value or initial value ( C0 862 )
- Unable to check characteristic values ( C0 865 )
- Allocate a function module to the process instruction ( C0 867 )
- Unable to calculate characteristic & as it is not numeric ( C0 868 )
Characteristic & is locked and cannot be changed ( C0 880 )
You may not be able to "copy" process instruction changes ( C0 881 )
Locked characteristic & was changed in the PI assistant ( C0 882 )
Unable to copy process instruction ( C0 883 )
Characteristics added to char. list because message category was changed ( C0 890 )
You cannot use fct &1 as a check function as it contains no exceptions ( C0 892 )
Caution: You can only use asyn. signature process at the end of PI sheet ( C0 893 )
Format data used from ABAP Dictionary ( C1 001 )
Characteristic & already exists ( C1 002 )
Characteristic & not found or not valid ( C1 003 )
Characteristic group & not found ( C1 004 )
Language key & already entered ( C1 005 )
Enter check report ( C1 006 )
Function module & does not exist ( C1 007 )
Check table & does not exist ( C1 008 )
Check routine & does not exist in check report & ( C1 009 )
No changes were made ( C1 010 )
Select one field only ( C1 011 )
Select a field ( C1 012 )
Interval values already assigned to characteristic ( C1 013 )
Internal unit of measure & not supported ( C1 014 )
Unit of measure & does not exist ( C1 015 )
Maintain format first ( C1 016 )
Value & is not numeric ( C1 017 )
Value & contains more than one decimal point ( C1 018 )
Enter the number of characters ( C1 019 )
No documentation exists ( C1 020 )
Characteristic & saved ( C1 021 )
Characteristic & changed ( C1 022 )
Table & does not exist ( C1 023 )
Field & not found in table & ( C1 024 )
Enter the name of a value table ( C1 025 )
Characteristic & deleted ( C1 026 )
You cannot enter more than & decimal places here ( C1 027 )
Minimum number of characters for exponent display is & ( C1 028 )
Select a value ( C1 029 )
Characteristic name already exists ( C1 030 )
Characteristic & is being processed by & ( C1 031 )
Internal error calling SAPscript ( C1 032 )
Only one value can be selected as default value ( C1 033 )
Value & entered more than once ( C1 034 )
This indicator cannot be deleted ( C1 035 )
Characteristic & still used ( C1 036 )
Enter a text for this characteristic in language & ( C1 037 )
Select at least one block ( C1 038 )
Change document & ( C1 039 )
Maintain allowed values ( C1 040 )
No document data found ( C1 041 )
Check headings ( C1 042 )
Characteristic from reserved name range: change not allowed ( C1 043 )
Choose a data type ( C1 044 )
Enter a field from table & ( C1 045 )
Enter either a check table or a function module ( C1 046 )
Language-dependent value & already exists in language & ( C1 047 )
The indicator "multiple values" cannot be deleted ( C1 048 )
End of screen sequence ( C1 049 )
"Case sensitive" indicator cannot be deleted ( C1 050 )
Allowed values overwritten for this object ( C1 051 )
Characteristic & contains characters that are not allowed ( C1 052 )
This characteristic is used in a class with class type & ( C1 053 )
This characteristic is used in a class with class type & ( C1 054 )
Indicate where you want the entries to be inserted ( C1 055 )
You are not allowed to delete characteristics ( C1 056 )
Documentation not found ( C1 057 )
Overwrite could not be deleted ( C1 058 )
Select the end of the block ( C1 059 )
Invalid selection ( C1 060 )
Internal Error ( C1 061 )
Selected table field is longer than defined characteristic length ( C1 062 )
Data type & not supported ( C1 063 )
Data redundancy only allowed with link to a table field ( C1 064 )
Redundant storage not possible ( C1 065 )
Class is being processed by another user ( C1 066 )
Language indicator cannot be deleted ( C1 067 )
Check the characteristic description and headings ( C1 068 )
Delete the allowed values first ( C1 069 )
Language indicator cannot be deleted ( C1 070 )
Set language indicator ( C1 071 )
Characteristic & already linked to this table field ( C1 072 )
Class type not supported ( C1 073 )
This indicator cannot be deleted ( C1 074 )
Allowed values are not consistent ( C1 075 )
Allowed values are not consistent ( C1 076 )
Allowed values are not consistent ( C1 077 )
Allowed values are not consistent ( C1 078 )
Allowed values are not consistent ( C1 079 )
Allowed values are not consistent ( C1 080 )
Allowed values are not consistent ( C1 081 )
Command cannot be interpreted ( C1 082 )
Characteristic length can only be increased ( C1 083 )
Number of decimal places can only be reduced ( C1 084 )
Characteristic & already released ( C1 085 )
No object dependencies found ( C1 086 )
The characteristic name cannot contain only figures ( C1 087 )
Characteristic name is within reserved name range ( C1 088 )
Internal error: characteristic name is not unique ( C1 089 )
Internal error: characteristic name not consistent with number ( C1 090 )
Enter either a selected set or the valid values ( C1 091 )
Enter a plant for the selected set ( C1 092 )
Plant &1 is not defined ( C1 093 )
Enter a selected set and plant ( C1 094 )
Field & in table & has a different data format ( C1 096 )
Invalid data type ( C1 097 )
Characteristic name & is reserved ( C1 098 )
Reference to table & already exists ( C1 099 )
The number of characters cannot be reduced ( C1 100 )
"Entry required" indicator cannot be set ( C1 101 )
"Multiple values" indicator cannot be deleted ( C1 102 )
Indicator allowing interval values cannot be deleted ( C1 103 )
Indicator for additional values cannot be deleted ( C1 104 )
Inconsistent change to allowed values ( C1 105 )
Value & cannot be deleted ( C1 106 )
Reference to field & in table & cannot be deleted ( C1 107 )
Enter a change number ( C1 108 )
On & you need to use change number & for processing ( C1 109 )
Characteristic & not valid as of & ( C1 110 )
Characteristic & is being processed ( C1 111 )
Data type & not supported ( C1 112 )
Classification data for characteristic could not be deleted ( C1 113 )
You cannot change object dependencies with change number & ( C1 114 )
Characteristic & not valid as of & ( C1 115 )
Characteristic renamed as & on this date ( C1 116 )
Characteristic not found ( C1 117 )
Characteristic & cannot be renamed ( C1 118 )
Characteristic & cannot be used in object dependencies ( C1 119 )
Characteristic name & does not begin with a letter ( C1 120 )
No subordinate values can be entered for value & ( C1 121 )
Enter characteristics group in customer name range ( C1 122 )
Object dependencies cannot be defined for value & ( C1 123 )
Characteristic description in language & restored ( C1 124 )
Multiple-values indicator refers to a reference characteristic ( C1 125 )
No subordinate values exist ( C1 126 )
Initialization error ( C1 127 )
Too many decimal places ( C1 128 )
Number of characters is too low for exponent display ( C1 129 )
Up to 15 characters of characteristic can be displayed ( C1 130 )
Data type of characteristics cannot be changed ( C1 131 )
Unit used cannot be changed ( C1 132 )
Indicator for case-sensitive entry cannot be changed ( C1 133 )
Enter a characteristic name ( C1 134 )
Enter a characteristic status ( C1 135 )
Template character not defined ( C1 136 )
Language key not supported in characteristic descriptions ( C1 137 )
Document not found ( C1 138 )
Value &: error in currency entry ( C1 139 )
Value &: error in date entry ( C1 140 )
Value &: value entered is not compatible with data format ( C1 141 )
Value &: internal unit missing ( C1 142 )
Value &: error in interval entry ( C1 143 )
Value &: error in time entry ( C1 144 )
Value &: no other unit allowed ( C1 145 )
Value &: unit not supported ( C1 146 )
Currency & not defined ( C1 148 )
Error during IDoc processing - see log for details ( C1 149 )
Enter a currency ( C1 150 )
Characteristic & not found ( C1 152 )
Class &(&) not found ( C1 153 )
Object &(&) not found ( C1 155 )
No values can be updated ( C1 156 )
Check table & has too many key fields ( C1 157 )
Check table & has no key fields ( C1 158 )
Data format of check table does not match data format of characteristic ( C1 159 )
Date for changes to characteristic & cannot be changed ( C1 160 )
Date for changes to characteristic & cannot be changed ( C1 161 )
Date for changes to characteristic & cannot be changed ( C1 162 )
Characteristic status & not defined ( C1 163 )
Table entries cannot be deleted ( C1 164 )
Length of key field in check table & is different to char. values ( C1 165 )
Data type of characteristic is not CHAR ( C1 167 )
No characteristics value exists ( C1 168 )
You cannot change the format data ( C1 169 )
Characteristic cannot be transformed to a reference characteristic ( C1 170 )
Enter a class and a class type ( C1 171 )
Enter a class and a class type ( C1 172 )
Select one type of value check ( C1 173 )
You cannot change a characteristic with this status in this system ( C1 174 )
This characteristic cannot be changed by distribution ( C1 175 )
Characteristic is "Entry required" but is not available for entry ( C1 176 )
Check the "default value" indicator for value & ( C1 177 )
You have no authorization for authorization group & ( C1 178 )
Date & is ignored if you do not enter a change number ( C1 179 )
Superior value for & does not exist ( C1 180 )
You cannot set the "restrictable" indicator ( C1 181 )
The characteristic has too many characters ( C1 182 )
Number of characters must be greater than the number of decimal places ( C1 184 )
Format changed ( C1 185 )
Allowed values will be lost if you change the checking method ( C1 186 )
Enter a new data type ( C1 187 )
The data type already exists ( C1 188 )
Select an existing data type ( C1 189 )
The data type currently being used cannot be deleted ( C1 190 )
The search engine index must be reorganized ( C1 192 )
Selected table field is longer than defined characteristic length ( C1 193 )
Where-used list in dependencies is only possible for character values ( C1 198 )
Report program can only be started in batch mode ( C1 201 )
Characteristic & has no allowed values ( C1 202 )
Characteristic & has not been overwritten in any class ( C1 203 )
No characteristic value selected ( C1 204 )
No class selected ( C1 205 )
Allowed values for characteristic & overwritten ( C1 206 )
Value & cannot be deleted by report program ( C1 207 )
Value & is still in use ( C1 208 )
Class & class type & is being processed by & ( C1 209 )
Table & cannot be used in class type & ( C1 210 )
More hits were found ( C1 211 )
Choose a date before &2. Characteristic &1, class &3/&4 ( C1 218 )
Choose a date after &2. Characteristic &1, class &3/&4 ( C1 219 )
Internal error: &1 (OMERK=&2), overwrite deleted ( C1 221 )
Dependency for characteristic & cannot be deleted ( C1 222 )
Maximum of one space character allowed in template ( C1 303 )
Length of exponent must be 4. Example: E-__ ( C1 305 )
Exponents must be numeric or in format && or SS ( C1 306 )
Units are only supported for numeric templates ( C1 307 )
Interval values not possible ( C1 309 )
No. of places before decimal point for standard exp format: 1 ( C1 312 )
No. of places before decimal point for scientific format: 3 ( C1 313 )
Section before the decimal point must have this form: & ( C1 314 )
Maximum number of characters: & ( C1 316 )
You can only enter exponent in exp. display format 2 ( C1 318 )
Template character not supported: & allowed ( C1 320 )
Number of characters entered is ignored due to template ( C1 321 )
Number of places changed; check the existing template ( C1 322 )
Template character & already used in characteristic & ( C1 328 )
Template characters ".", ".", "-" and "E" are reserved ( C1 329 )
Characteristic & does not have a name in language '&' ( C1 501 )
The characteristic has not been changed ( C1 506 )
Obsolete function module & called ( C1 666 )
Function cannot be executed because SAP System is incomplete ( C1 667 )
Characteristic & has the assigned value & ( C1 700 )
You cannot position on characteristic & and/or assigned value & ( C1 701 )
Characteristic & / assigned value & is part of UDEF & ( C1 702 )
&: Value "&" not found ( C1 801 )
Characteristic "&" is being processed ( C1 802 )
Value "&" not possible because object is assigned to class "&" ( C1 803 )
Display mode - value cannot be selected ( C1 804 )
Inherited characteristics cannot be assigned values right now ( C1 806 )
Reference characteristic - value cannot be selected ( C1 807 )
Required characteristic '&' was excluded ( C1 809 )
Selections for Customizing are inconsistent ( C1 811 )
You cannot select "&" ( C1 814 )
Entry at "Entries" is incorrect ( C1 815 )
Confirm "&" ( C1 816 )
No value was assigned to "&" ( C1 817 )
Object "&" already classified with same characteristic values ( C1 818 )
More than one object already classified with same characteristic values ( C1 819 )
Value "&" cannot be restricted ( C1 820 )
Inconsistent characteristic value assignment ( C1 821 )
Only one value allowed for "&" ( C1 822 )
The assigned values are incomplete ( C1 823 )
Enter display options for the characteristic ( C1 824 )
Value documentation could not be displayed. No values found ( C1 825 )
Select according to type of characteristic ( C1 826 )
Select according to assigned values ( C1 827 )
Inheritance data prevents selection for "&" ( C1 828 )
Not all characteristic values could be inserted in the clipboard ( C1 836 )
No runtime object exists ( C1 840 )
Object & - characteristic &: value "&" does not exist ( C1 841 )
Select the characteristics you require ( C1 850 )
Value "&" cannot be deleted ( C1 851 )
Value "&" cannot be expanded ( C1 852 )
Value "&" cannot be selected ( C1 853 )
You cannot maintain a condition for value "&" ( C1 855 )
No characteristics selected for matrix processing ( C1 860 )
You must select exactly two characteristics for a matrix ( C1 861 )
Characteristic "&" not allowed for matrix processing ( C1 862 )
No matrix has been defined yet ( C1 863 )
No planning variant found ( C1 867 )
& was found to be the most similar planning variant ( C1 868 )
Characteristic cannot be shown ( C1 871 )
Characteristic(s) not in knowledge base (modeling) ( C1 873 )
Change is not possible on "&" ( C1 889 )
Value &2 no longer allowed for characteristic &1 ( C1 890 )
You cannot change "&" with change number "&" ( C1 891 )
There are no changes ( C1 892 )
Characteristic "&" has no object dependencies ( C1 893 )
Value "&" has no object dependencies ( C1 894 )
Characteristic "&" has no document ( C1 895 )
Value "&" has no document ( C1 896 )
Use transaction CT04 for characteristics management ( C1 898 )
& ( C1 899 )
There are no entries in the availability log for material components ( C2 012 )
There are no entries in the availability log for PRTs ( C2 013 )
Material & not available in full quantity for order & ( C2 015 )
No current dates exist for item & (carry out new availability check) ( C2 016 )
No current missing parts list exists for order & (new availability check) ( C2 017 )
Item &1 material &2 not checked (see long text) ( C2 021 )
Item & & not checked due to final posting indicator ( C2 022 )
No availability check for components with final posting indicator ( C2 023 )
No availability check for deleted components (item &1, material &2) ( C2 024 )
Material &: Production version not maintained ( C2 025 )
No availability check for co-products (item &1, material &2)) ( C2 026 )
No availability check if requirements quantity is zero (item &1, mat. &2) ( C2 027 )
Item &1 material &2: an error occurred in the availability check ( C2 037 )
Dependent orders have not been read - order cannot be released ( C2 046 )
No availability check for bulk material (item &1, material &2) ( C2 047 )
Operation does not have capacity requirements ( C2 053 )
Order not locked - order changes not allowed ( C2 054 )
Order routing and production version routing differ ( C2 055 )
Order BOM and production version BOM differ ( C2 056 )
Transfer date of routing not in validity period of production version ( C2 057 )
Explosion date of BOM not in validity period of production version ( C2 058 )
No availability check for components with direct procurement (item & &) ( C2 067 )
Availability check cannot be executed for capacities ( C2 072 )
Enter at least one selection criterion ( C2 077 )
All the planned orders in the system are read ( C2 078 )
Availability check only for information purposes (see long text) ( C2 082 )
Incorrect planned order no. &. Replan material & plant & ( C2 083 )
There are no current test results for order & ( C2 086 )
Serial numbers cannot be maintained (see long text) ( C2 093 )
Characteristic valuation does not exist ( C2 094 )
There is no status management for this object type ( C2 095 )
CO data does not exist ( C2 096 )
Field & in profile & can no longer be displayed ( C2 101 )
All the selection criteria were deleted ( C2 114 )
The component list chosen contains no entries ( C2 115 )
The pick list chosen contains no entries ( C2 116 )
All selected reservations are locked by another user ( C2 117 )
Item &1 material &2: manually confirmed quantity was cancelled ( C2 118 )
Order & was confirmed ( C2 120 )
Order & is partially confirmed ( C2 121 )
Order & already printed ( C2 122 )
Order & is partially printed ( C2 123 )
Order & - Inspection lots were already created ( C2 124 )
Order & already delivered ( C2 125 )
Order & partially delivered ( C2 126 )
Order &: Goods withdrawal carried out ( C2 127 )
Order & purchase orders exist ( C2 128 )
Order & goods receipt posted ( C2 129 )
Order &: purchase orders already exist for operation & ( C2 130 )
Order & routing cannot be read in collective order! ( C2 131 )
Order & is released ( C2 133 )
Order & is partially released ( C2 134 )
Order &: transport requirements generated ( C2 135 )
Status of released order is reverted to "Created" ( C2 136 )
Order &: Partial network scheduling with finish date as framework date ( C2 137 )
Order &: Subnetwork scheduled backwards ( C2 138 )
Order &: Sales order & is assigned ( C2 140 )
No valid production version found for material & ( C2 142 )
Subnetwork for component &1 &2 cannot be created ( C2 145 )
The production version used is not valid ( C2 146 )
No production order belongs to sales order &1 ( C2 153 )
Processing steps not in continuous sequence ( C2 156 )
Please select a sales order or a change number ( C2 157 )
Simulation order does not yet exist ( C2 161 )
No changes have so far been determined ( C2 162 )
Order &: Assembly order can only be deleted via customer order & ( C2 163 )
Production version selected is not allowed in quota planning ( C2 164 )
No detailed screen available for function &1 ( C2 165 )
Internal: Error when compressing or decompressing data ( C2 166 )
The function &1 does not support the selected function code ( C2 167 )
Internal: Error due to repeated generation of a function selection ( C2 168 )
Column width in profile & initial - the default width is used ( C2 169 )
Read error for function selection for &1 to &2 ( C2 171 )
Mass processing executed - &1 log(s) created (&2) ( C2 176 )
&1 function selections generated ( C2 177 )
No function selected for mass processing ( C2 187 )
Initiating object record &1 is locked by user &2 ( C2 188 )
Procurement element change record &1 is locked by user &2 ( C2 189 )
Initiating object record &1 is locked by user &2 ( C2 190 )
No change profile could be determined for order & ( C2 191 )
Procurement element change record &1 is locked by user &2 ( C2 192 )
There is no simulation order for production order & ( C2 193 )
Status selection profile for order & not valid ( C2 194 )
Mass processing in background triggered ( C2 196 )
Material & is configured in the sales order ( C2 197 )
Reference order & is part of a configurable collective order ( C2 199 )
Collective order (assembly orders) not completely read ( C2 201 )
Component &1 (pos. &2) has no requirements date ( C2 204 )
Serial numbers cannot be mantained ( C2 206 )
Split order &1 cannot be archived ( C2 207 )
Document version &1 for date &2 not valid (current version: &3) ( C2 218 )
Function cannot be executed for order & ( C2 220 )
Characteristic change for material & does not lead to a new BOM explosion ( C2 222 )
A valid bill of material could not be found for material &1 ( C2 223 )
The reference operation set & you selected is not valid ( C2 224 )
Settlement rule cannot be copied ( C2 225 )
Backflush indicator cannot be set for material &1 ( C2 226 )
Settlement rule cannot be created with settlement profile & ( C2 230 )
A valid bill of material could not be found for material &1 ( C2 232 )
Change to the WBS element. Components are adjusted ( C2 234 )
Procurement element change records still exist for order &1 ( C2 235 )
Leading order &1 has a procurement element change record ( C2 236 )
Order &1 has the status "Change forbidden" ( C2 237 )
Enter a distribution rule for &1 ( C2 240 )
Component &1 with backflush indicator cannot be reassigned ( C2 241 )
BOM for planned order &1 not valid for orders ( C2 242 )
Order & created by order split. ( C2 244 )
Quality notification &2 still exists for order &1 ( C2 245 )
Goods receipt taking place => Settlement rule cannot be changed ( C2 246 )
Settlement rule cannot be changed as is already being used ( C2 247 )
Change settlement rule, as automatic change is not possible ( C2 248 )
Sales order/item &1/&2 does not exist (see long text) ( C2 251 )
Batch &1 was deleted from split record for material &2 (see long text) ( C2 252 )
Planned order &1 cannot be converted - order network incomplete ( C2 256 )
Material &1 is not copied due to mat.status &2 (&3) ( C2 257 )
Operation &1 for order &2 sequence &3 has dependent objects ( C2 260 )
Material withdrawal already posted for order ( C2 274 )
Goods receipt posted: You cannot add a co-product ( C2 276 )
Goods receipt posted: Co-product is added as a by-product ( C2 277 )
Change to the WBS element: Collective order not completely imported ( C2 278 )
WM-relevant component &1 cannot be reassigned ( C2 279 )
Negative quantity not allowed for externally-procured component &1 ( C2 281 )
Master data in order &1 are no longer current ( C2 283 )
Master data in reference order are no longer current ( C2 284 )
Component &1 with backflush indicator cannot be reassigned ( C2 286 )
Backflush: Control key & should allow confirmation ( C2 287 )
Updating superordinate reservation with changed data ( C2 289 )
Material &1/&2: Components and operations can only be copied together ( C2 290 )
Selection of production version in the batch input ( C2 292 )
It was not possible to select a routing automatically ( C2 294 )
Unexpected COMMIT WORK ( C2 295 )
No SAPscript form defined for list &1 (ref. order type &2, report &3) ( C2 298 )
No PDF form defined for list &1 (reference order type &2, report &3) ( C2 299 )
Status text for object & in order & could not be determined ( C2 300 )
Number of displayed orders limited to &1 (&2 orders selected) ( C2 301 )
Collective availability check cancelled (error while resetting) ( C2 302 )
A previously used distribution rule already exists ( C2 303 )
Configuration in order & is invalid for current date ( C2 304 )
Order &1 is assigned to account of order &2 ( C2 305 )
Planned order &1 does not contain any reservations for phantom assemblies ( C2 308 )
First execute planning run (multi-level) for material &1 ( C2 309 )
Component & item & cannot be deleted (see long text) ( C2 311 )
No more free item numbers (Please check) ( C2 312 )
User status & prohibits scheduling. Enter a date ( C2 313 )
Choose the object 'components' ( C2 316 )
User status prevents deletion of inspection lot &2 ( C2 317 )
Number of selected planned orders restricted to 9999 ( C2 318 )
Registration for configuration is not possible for order & and object & ( C2 319 )
Production scheduling profile &1 is already being used ( C2 320 )
Scheduling terminated: Total commitment date does not exist ( C2 321 )
Settlement rule contains errors and has not been saved ( C2 323 )
Error occurred during creation of purchase requisition for operation & ( C2 325 )
Inconsistent data: &1, duplicate entry &2 ( C2 327 )
Plan was not exploded due to errors! ( C2 337 )
A purchase order with parts already exists for operation & ( C2 339 )
The system was unable to create the settlement rule ( C2 345 )
Comp. &1 deleted because material &2 is locked (discontinuation group &3) ( C2 346 )
Purchase requisition could not be created during mass conversion ( C2 347 )
Long text will be overwritten with standard text ( C2 349 )
Error during generation of settlement rules for co-products ( C2 350 )
No storage location maintained for order item &2 ( C2 351 )
Plant/storage location combination &3/&4 not assigned to a warehouse no. ( C2 352 )
Warehouse number &4 in order item &3 is not EWM-managed ( C2 353 )
Order & contains no or too many items ( C2 354 )
Reservation item &1: Direct production not possible in order network ( C2 355 )
Reservation number &1: Direct procurement not possible ( C2 356 )
Reservation item &1: By-products not possible ( C2 357 )
Reservation item &1: Backflushing not possible ( C2 358 )
No storage location maintained for reservation item &1 ( C2 359 )
Plant/storage location combination &3/&4 not assigned to a warehouse no. ( C2 360 )
Warehouse number in reservation item &1 not correct ( C2 361 )
Requirement dates/times of components in order &1 do not match up ( C2 362 )
Operation &1: Automatic goods receipt not possible ( C2 363 )
Operation &1: Parts provided (subcontracting components) not supported ( C2 364 )
Operation &1: Non-supported trigger points assigned ( C2 365 )
Operation release not possible in case of kit-to-stock orders ( C2 366 )
Order &1 is part of an order network ( C2 367 )
WM staging cannot be carried out for order &1 ( C2 368 )
Data for plant &4 incompletely maintained ( C2 373 )
Order &1: Automatic goods receipt not possible ( C2 377 )
Postprocessing records exist for delivery &1 ( C2 383 )
Business area required to release order &1 ( C2 387 )
Inspection lot &1 for order &2 does not have necessary status ( C2 498 )
Order & not archivable - order hierarchy not complete LOEKZ ( C2 502 )
Internal error; No business configuration object ( C2_EXCEPTION 002 )
Selection conditions are not supported for text fields ( C2_EXCEPTION 004 )
Internal error; Object &1 missing ( C2_EXCEPTION 051 )
Data record locked for distribution ( C2_EXCEPTION 052 )
Costing variant & does not exist ( C3 001 )
Costing variant & does not belong to material cost estimate ( C3 002 )
Description for costing variant &1 missing in language &2 ( C3 003 )
Costing type & does not exist ( C3 004 )
Description for costing type &1 missing in language &2 ( C3 005 )
No date control ID assigned to costing variant & ( C3 006 )
No reference object assigned to costing type & ( C3 007 )
Reference object &2 assigned to costing type &1 does not exist ( C3 008 )
Description missing for ref. obj. & in language & ( C3 009 )
Val. variant &2 assigned to costing variant &1 does not exist ( C3 010 )
Description missing for valuation variant & in language & ( C3 011 )
Costing relev. ind. &2 assigned to vltn vrnt &1 does not exist ( C3 012 )
Description missing for costing relev. ind. & in language & ( C3 013 )
No costing relevancy indicator assigned to valuation variant & ( C3 014 )
No costing sheet is assigned to valuation variant & ( C3 015 )
Costing sheet & assigned to valuation variant & does not exist ( C3 016 )
Qty struct. control & assigned to costing variant & does not exist ( C3 017 )
Plant & assigned to quantity structure control & does not exist ( C3 018 )
Qty struct. &, plant &: BOM application & does not exist ( C3 019 )
BOM application & also includes BOM not released for costing ( C3 020 )
Altve BOM selection through multiple BOM table for BOM application & ( C3 021 )
No BOM usage found for BOM application & ( C3 022 )
Qty struct. &, plant &: Selection ID & for routings does not exist ( C3 023 )
Qty struct. & is not assigned to a routing appl. or order type ( C3 024 )
Order type &2 assigned to qty struct. &1 does not exist ( C3 025 )
Order type & not assigned to a valid order category ( C3 026 )
Rtg appl. & for qty str. & unsuitable for rtg appl. of order type & ( C3 027 )
No parameters exist for order type/plant & / & ( C3 028 )
Appl. & in qty str/plant & differs from appl. & of order type/plant & ( C3 029 )
Sel.ID & of qty str/plant & differs from sel. ID & of order type/plant & ( C3 030 )
No parameters for order type & ( C3 031 )
No cost component structure assigned to costing variant & ( C3 032 )
Date control &2 assigned to costing variant &1 does not exist ( C3 033 )
Short text missing for date control ID & in language & ( C3 034 )
No number range assigned to costing variant & ( C3 035 )
Factors for relevancy to costing not valid for std cost est & ( C3 037 )
Factors for relevancy to costing not valid for cost est. with qty struct. ( C3 038 )
No qty structure control assigned to costing variant & ( C3 039 )
Cost comp. structure &2 for costing variant &1 does not exist ( C3 040 )
Name missing for cost component structure &1 in language &2 ( C3 041 )
Cost comp. structure requires cost element/origin assignment ( C3 042 )
Overlapping cost elements/origins with chart of accts/cost comp. str. & ( C3 043 )
Cost comp. &2 assigned to cost comp. structure &1 does not exist ( C3 044 )
Name missing for cost component &1 in language &2 ( C3 045 )
Internal error: Cost comp. & in cstg sheet & not assigned to cost field ( C3 046 )
Internal error: Error on total cost field and fxd cost field assgnmnt ( C3 047 )
Internal error: KEPH cost field assigned more than once ( C3 048 )
Scheduling parameters for order type & in plant & does not exist ( C3 049 )
Quantity structure control &1 has no name in language &2 ( C3 050 )
Transfer control &2 assigned to costing variant &1 does not exist ( C3 051 )
Transfer control ID &1 has no name in language &2 ( C3 052 )
Cost comp. view &2 assigned to costing type &1 does not exist ( C3 053 )
Costing variants & and & would overwrite each other ( C3 054 )
Val. variant & has no valuation strategies for material components ( C3 055 )
Val. variant & has no valuation strategies for internal activities ( C3 056 )
Val. variant & has no valuation strategies for external processing ( C3 057 )
Val. variant & has no valuation strategies for subcontracting ( C3 058 )
Factors for relev. to costing are 0 or 1 for stand. cost est. & ( C3 063 )
No authorization for costing variant & ( C3 501 )
Value & does not exist ( C4 000 )
Value "&" is not numeric ( C4 001 )
Value "&" is incompatible with template "&" ( C4 002 )
Upper limit "&" is less than or equal to lower limit "&" ( C4 003 )
"&" in first value is incompatible with "&" in second value ( C4 004 )
& does not allow interval values ( C4 005 )
& only allows you to enter one value ( C4 006 )
Unit & not defined ( C4 007 )
Unit cannot have more than six characters ( C4 008 )
Currency & not defined ( C4 009 )
Entry "&" longer than maximum of & characters ( C4 010 )
Date entry & does not have format & ( C4 011 )
The month of & only has & days ( C4 012 )
Error in month specified ( C4 013 )
Negative value & not allowed ( C4 014 )
Second value & & is less than or equal to first value & & ( C4 015 )
Time & does not have the format & ( C4 016 )
Values for hours must be between "00" and "24" ( C4 017 )
Values for minutes must be between "00" and "59" ( C4 018 )
Values for seconds must be between "00" and "59" ( C4 019 )
Calculated value "&" is incompatible with template ( C4 020 )
Value "&" is not numeric ( C4 021 )
You cannot enter a time > "24:00:00" ( C4 022 )
& does not allow another unit ( C4 023 )
Internal base unit "&" does not exist ( C4 024 )
Entry "&" is too long ( C4 025 )
Values you entered were merged ( C4 026 )
Error in day specified ( C4 027 )
Value "&" is incompatible with the template ( C4 030 )
Value "&" is too high as a converted base quantity ( C4 031 )
Only one value can be selected for & ( C4 100 )
Class "&" is locked ( C4 200 )
Subordinate class "&" is locked ( C4 201 )
The increment must be less than the number of characteristic values (&) ( C4 811 )
Enter an increment between 1 and & ( C4 812 )
Place the cursor on the characteristic value you want to select ( C4 813 )
Select only one line or column that you want to copy ( C4 816 )
Values copied to clipboard for line or column ( C4 817 )
Place cursor on the value in the row/column to which you want to copy ( C4 818 )
No values assigned to node ( C4 821 )
The line clipboard is empty ( C4 822 )
The column clipboard is empty ( C4 823 )
Values for object & incomplete (characteristic & has no value) ( C4 828 )
To display initial list, place cursor on a variant article ( C4 832 )
You cannot combine characteristic value '&1' and date &2 ( C4 836 )
Read Table & with SUBRC & in program & & ( C5 001 )
Change table &: of & records & have been updated ( C5 003 )
Delete in table &: of & records & have been updated ( C5 004 )
Insert in table &: of & records & have been updated ( C5 005 )
Requested function & not supported here ( C5 008 )
Internal error in function module & & ( C5 009 )
Internal error in form routine & & ( C5 010 )
Internal error in module & & ( C5 011 )
System could not scroll ( C5 012 )
Note the change rule "&" assigned to the profile ( C5 014 )
Change document creation for table &: Error at "GET_NAMETAB" ( C5 016 )
Change document creation for table &: Command "OPEN" is missing ( C5 017 )
Change document creation for table &: Error at command "INSERT" ( C5 018 )
Change document creation for table &: Internal error ( C5 019 )
Use change rule & or one that is more restrictive ( C5 020 )
Assign material &1 in plant &2 to recipe group &3 with recipe number &4 ( C5 022 )
Changes to change rule and change type are not allowed ( C5 023 )
Enter a valid downtime element ( C5 026 )
Key date was copied and change number was reset ( C5 083 )
Intra material &1 for product flow is not identical to header material &2 ( C5 084 )
Product flow has already been defined at phase &1 of the operation for &2 ( C5 086 )
You can only maintain relationships between phases ( C5 451 )
You cannot maintain relationships between different recipes of one group ( C5 452 )
Unable to create relationships ( C5 454 )
Generation terminated; at least one phase is used twice ( C5 457 )
Line & is blocked ( C5 501 )
No recipes exist for plant & ( C5 503 )
No recipes exist for line & ( C5 504 )
Enter the plant allocated to recipe group & ( C5 505 )
No recipes exist for this selection criteria ( C5 506 )
Enter a plant ( C5 507 )
Network & in plant & does not exist ( C5 508 )
Master recipe & & does not exist ( C5 512 )
The recipe group contains several master recipes. Enter recipe number. ( C5 513 )
Plant & already allocated to recipe group & ( C5 516 )
No recipe found for &. Enter a valid one. ( C5 517 )
Select another secondary resource number, this one already exists ( C5 555 )
No production versions exist for material $ $ ( C5 603 )
Select a valid production version for the recipe ( C5 606 )
Enter a new production version, & already exists ( C5 607 )
You cannot branch to another material list ( C5 608 )
No valid BOM exists for material & plant & ( C5 609 )
The material does not exist for & & & ( C5 610 )
Date of production version does not match BOM alternative ( C5 612 )
Lot size of production version does not match BOM alternative ( C5 613 )
The "from" lot size must not exceed the "to" lot size ( C5 615 )
The "to" date is in the past ( C5 616 )
Run schedule headers with a different validity exist for production vers. ( C5 617 )
BOM alternative is used in a different master recipe ( C5 618 )
No production version exists ( C5 619 )
You cannot convert the charge quantity unit to the material quantity unit ( C5 620 )
Production version & uses the BOM & in recipe & & ( C5 621 )
Production version & for the recipe does not have a BOM alternative ( C5 625 )
Material master &2 &3 is locked by user &1 ( C5 626 )
You do not have authorization to edit the production version ( C5 628 )
Production versions still exist ( C5 629 )
Detailed plan &1 &2 requires approval ( C5 632 )
No material/recipe allocation found ( C5 633 )
Formula results in quantity of zero; results are not transferred to BOM ( C5 643 )
Error occurred when exploding BOM in &1 in master recipe &2 ( C5 645 )
Recipes exist in the past or in the future ( C5 658 )
You do not have authorization to delete this recipe ( C5 660 )
You cannot change task list/recipe & because of change rule & ( C5 666 )
Not all recipes are displayed due to missing display authorization ( C5 667 )
No data displayed as you do not have the required display authorization ( C5 668 )
Data for class type & has not been converted yet ( C5 701 )
Resource & is marked for deletion ( C5 702 )
Resource & is locked ( C5 703 )
For operations, choose control key without external processing ( C5 704 )
Resource & does not exist in plant &. Operation & was copied w/o resource ( C5 705 )
Control recipe destination & does not exist in plant & (phase &) ( C5 706 )
Res. & does not exist in plant &. Sec.res. for op. & was copied w/o res. ( C5 708 )
Materials is available in the material list more than once ( C5 709 )
Place the cursor on a line containing a phase ( C5 754 )
Enter a control recipe destination for phase & ( C5 757 )
Enter the number of an existing operation ( C5 759 )
Mark as a phase ( C5 760 )
& is a phase, enter the number of an operation ( C5 761 )
The resource of a phase is automatically copied from the operation ( C5 762 )
Enter the number of the superior operation ( C5 763 )
Ctrl recipe destinations assigned to operations are deleted automatically ( C5 764 )
Check the standard values for the phase ( C5 765 )
Control recipe destination & not found ( C5 766 )
Control recipe dest. & is not supported for a PI sheet ( C5 767 )
The phases you selected do not have the same control recipe destinations ( C5 768 )
Phase & does not exist in recipe & & ( C5 772 )
Select another number, this one already exists. ( C5 801 )
Process instr. cat. & does not exist (check entry) ( C5 808 )
& process instruction characteristics deleted ( C5 815 )
& process instruction characteristics created ( C5 816 )
& process instruction characteristics deleted and & created ( C5 817 )
Process instruction number &/&/&/& is not unique ( C5 818 )
Process instruction date &: Number & is not unique ( C5 819 )
Process instruction & does not exist in plant & ( C5 820 )
Unable to copy long text for process instruction characteristic & ( C5 858 )
The system could not select a process instruction characteristic ( C5 859 )
Process instruction characteristic & does not exist (check entry) ( C5 860 )
Select a characteristic with a long text assignment ( C5 862 )
PIC number &/&/&/& is not unique ( C5 863 )
PI characteristic date & number & (process instruction &) is not unique ( C5 864 )
Order & not found or not permitted for goods movement ( C6 001 )
System error when locking object & key & ( C6 005 )
No order items exist in order & ( C6 006 )
No valid order item exist in order & ( C6 007 )
No valid order items exist for order & ( C6 008 )
Current order status & does not allow goods receipt ( C6 009 )
Order not found in internal table - system error ( C6 010 )
Item not found in internal table - system error ( C6 011 )
Current order status & does not allow goods withdrawals ( C6 013 )
Current network status & does not allow goods withdrawals ( C6 014 )
No valuation variant found for valuation area & ( C6 015 )
No orders could be selected ( C6 017 )
Costing variant & is not permitted ( C6 019 )
Quantity conversion not possible for price determination ( C6 020 )
No objects selected ( C6 024 )
The order value is too rough - goods receipt not possible ( C6 025 )
Settlement documents for order partly archived -> long text ( C6 026 )
Goods receipt items must be entered ( C6 041 )
Goods movement not possible (Order &1 is a kit-to-stock order) ( C6 051 )
Goods receipt not possible for EWM-managed warehouse &1 ( C6 052 )
Internal error occurred while calling a container method ( C6 100 )
Internal error occurred while calling a tree control method ( C6 101 )
Internal error occurred while calling a textedit control method ( C6 102 )
Internal error while calling method cl_gui_cfw=>flush ( C6 103 )
Environment display not supported for selected object ( C6 104 )
Select purchase order or purchase order item ( C6 105 )
Internal error occurred while calling a workflow toolbox method ( C6 106 )
Scheduling terminated: Check date and scheduling type ( C7 001 )
Scheduling terminated: Check lot size unit of measure ( C7 002 )
Scheduling terminated: Check lot size unit of measure ( C7 003 )
All standard values not maintained in the operation ( C7 005 )
No dates found for restrictions ( C7 006 )
Date for restriction could not be converted ( C7 007 )
Date is not defined in factory calendar ( C7 008 )
Scheduling terminated: No time unit defined for day ( C7 012 )
Time units are not fully defined ( C7 013 )
No working/operating time maintained in work center for scheduling ( C7 014 )
No capacity category maintained in work center for scheduling ( C7 015 )
Calender not found ( C7 016 )
No calendar specified ( C7 017 )
Work center not found ( C7 018 )
Entry not found in move time matrix ( C7 019 )
Field overflow when calculating PRT quantities ( C7 020 )
Field overflow when calculating PRT usage values ( C7 021 )
Date cannot be converted into the internal format ( C7 022 )
Error when converting into other quantity units ( C7 023 )
Field overflow when calculating duration ( C7 024 )
Scheduled start is after scheduled finish ( C7 025 )
Scheduling type not defined, scheduling type = "only capacity reqmts" ( C7 026 )
Quantity unit of the operation/activity is invalid ( C7 027 )
No release period key defined for scheduling ( C7 029 )
Start date is in the past: today scheduling ( C7 030 )
Control key & not found ( C7 031 )
Scheduling terminated: Scheduling parameters are missing ( C7 032 )
Constraint is before basic start date ( C7 033 )
Constraint is after basic finish date ( C7 034 )
Schedule conflict: Constraint is too early ( C7 037 )
Schedule conflict: Constraint is too late ( C7 038 )
Cannot keep within time constraint ( C7 039 )
Schedule conflict: Contradicting time constraints ( C7 040 )
Relationship: No operating time maintained in work center for scheduling ( C7 042 )
Rel: No capacity category maintained in work center for scheduling ( C7 043 )
Relationship: Calendar does not exist ( C7 044 )
Relationship: No calendar specified ( C7 045 )
Rel: Work center does not exist ( C7 046 )
Rel: Field overflow when calculating the time interval ( C7 047 )
Rel: Date is not defined in factory calendar ( C7 048 )
Rel: Date cannot be converted into the internal format ( C7 049 )
Rel: Error when converting into different quantity unit ( C7 050 )
Operating time not maintained for move in the move time matrix ( C7 051 )
Division by 0 when calculating operation quantity ( C7 055 )
Capacity & not available ( C7 056 )
No valid capacity for finite scheduling ( C7 057 )
Relationships to other standard networks exist ( C7 058 )
Overlapping could not be maintained ( C7 063 )
Minimum overlap time could not be maintained ( C7 064 )
Error during scheduling of splits ( C7 066 )
Not all standard values maintained ( C7 067 )
Can delivery date for material & be kept? Realistic date: & ( C7 068 )
Relationship: Maximum duration could not be kept ( C7 070 )
WBS element &: Forwards scheduling is not possible without a start date ( C7 078 )
WBS element &: Backwards scheduling is not possible without a finish date ( C7 079 )
Program CX_TCX00 executed with a warning ( C7 081 )
Time units exist that are smaller and larger/equal to the day ( C7 082 )
Repetitive maufacturing: Midpoint sched. around work center &1 not poss. ( C7 085 )
In-house production time determined is greater than 999 days ( C7 086 )
Lot size is not within selected lot size range ( C7 108 )
Check if rate-based scheduling is appropriate -> see long text ( C7 111 )
Dates do not exist in the forecast dates ( C7 145 )
Statusselection is locked by user & ( C8 022 )
Status &1 does not exist in language &2 ( C8 030 )
Status profile cannot be changed in selection profile &2 ( C8 040 )
Invalid combination of application &/type & ( C9 010 )
Material and task list & do not belong to same company code ( C9 013 )
Material and task list & do not belong to same controlling area ( C9 014 )
Material-routing assignment already exists in the future ( C9 015 )
W: Printing not allowed for order &1 ( C= 004 )
E: Original/partial print of order &1 requested (order already printed) ( C= 006 )
E: Order &1 is already being processed ( C= 012 )
E: Error in reading order &1 - print terminated ( C= 014 )
E: Error in status update of order &1 - print terminated ( C= 015 )
Field can only be allocated to title or heading ( CA 260 )
Internal error: Transaction '&' cannot be initialized ( CA 263 )
Select an object ( CA 271 )
Enter the new PRT ( CA 272 )
Process session & ( CA 278 )
You cannot change the task list with type & ( CA 279 )
The work centers have different standard value keys (& and &) ( CA 282 )
The work centers belong to different controlling areas & & ( CA 293 )
The work centers are assigned to different cost centers & & ( CA 294 )
Values have been added in data element "BDCFKT" (adjust program) ( CA 300 )
You cannot exit BDCDATA using FCode "bu" ( CA 301 )
New transaction ( CA 302 )
No header overview found for & ( CA 304 )
Object overviews not maintained. Transaction cannot be carried out ( CA 305 )
Object cannot be edited ( CA 306 )
Object is used in an operation marked for deletion. ( CA 314 )
Function cannot be carried out as object was already changed. ( CA 315 )
You cannot replace: Validity of old object in the past. ( CA 316 )
Object & & is no longer used ( CA 325 )
Cannot cancel document & ( CABALOCO 013 )
A currency could not be determined for personnel no. & on & ( CABA_EXTERN_HR 000 )
Combining data did not succeed ( CACSAC 004 )
Actual commission for remuneration &1 requires settlement scheduling ( CACSAC1 006 )
Error while creating fulfillment level periods for item &3 ( CACSAC1 008 )
Error while creating fulfillment level for item &3 ( CACSAC1 009 )
The document posting is locked by another process ( CACSAC 101 )
Error while creating fulfillment level ( CACSAC1 010 )
System cannot read fulfillment level of GUID &1 ( CACSAC1 012 )
Threshold value reached for settlement schedule item with GUID &1 ( CACSAC1 013 )
Threshold value reached for settlement schedule item with GUID &1 ( CACSAC1 014 )
Error in transfer of actual commn notification to log of calling program ( CACSAC1 015 )
Error while determining release rules for commission contract ( CACSAC1 016 )
Deletion of fulfillment level for stt.schedule item(s) &1/&2 failed ( CACSAC1 017 )
The result of release rule determination is invalid ( CACSAC1 018 )
Update mode V3: Schedule CACS_TRIGGER_V3 report daily ( CACSAC 102 )
Transfer of fulfillment periods for remuneration line &1 not possible ( CACSAC1 022 )
Update mode V3 deactivated: CACS_TRIGGER_V3 report no longer necessary ( CACSAC 103 )
Technical error: incorrect call of module CACS00_DOC_POST2 ( CACSAC 104 )
Copying step of cross-client data is missing ( CACSAPPK 098 )
Copying step of client-dependent data is missing ( CACSAPPK 099 )
Copying step of master data is missing ( CACSAPPK 100 )
You can only delete separately ( CACSAPPK 139 )
&1 is an application delivered by SAP ( CACSAPPL 003 )
&1 is not a valid name for a transport application ( CACSAPPL 008 )
Application can only be changed in the original system &1 ( CACSAPPL 011 )
Application can only be changed in the original client &1 ( CACSAPPL 012 )
Application can only be changed in the original language &1 ( CACSAPPL 013 )
This name is not permitted (see long text) ( CACSAPPL 015 )
No commission application defined for the user parameter ( CACSAPPL 106 )
Currently only one application domain can be selected ( CACSAPPL 200 )
No task has been defined for application &1 ( CACSAPPL 503 )
Processing has been terminated ( CACSAPPL 526 )
Implementing class &1 for step &2 contains errors ( CACSAPPL 527 )
More than one upgrade is active for application &1 ( CACSAPPL 528 )
Task "&1" is already being excecuted ( CACSAPPL 536 )
Incomplete parameters for job scheduling ( CACSAPPL 540 )
Not all steps have been executed for preceding time-spots ( CACSAPPL 542 )
Client settings for generation client &1/&2 is incorrect ( CACSAPPL 543 )
It is not possible to determine the necessary adjustments ( CACSAPPL 547 )
Determine necessary adjustments ( CACSAPPL 548 )
Task cannot be found ( CACSAPPL 549 )
Required steps have not yet been executed ( CACSAPPL 550 )
Automatic adjustment of application ( CACSAPPL 554 )
Parameters for function module &1 incorrect ( CACSBAS 001 )
Message handler not active, software problem ( CACSBAS 002 )
You have no authorization for commission applications ( CACSBAS 003 )
No messages for the log are displayed ( CACSBAS 019 )
Not possible to display log for commission case -> see long text ( CACSBAS 023 )
Not possible to display log for commission document -> see long text ( CACSBAS 024 )
Wrong message type for following message ( CACSBAS 025 )
Exception &1 was triggered in program &2 ( CACSBAS 030 )
An exception was triggered while accessing log ( CACSBAS 031 )
Function module &1 ended with errors ( CACSBAS 032 )
Unknown message type in the function module CACS_BUFFER_OVERVIEW ( CACSBAS 100 )
Function module "&1" for tool "&2" does not exist or is inactive ( CACSBAS 151 )
No tool maintained for logical service &1 ( CACSBAS 152 )
No logical service maintained ( CACSBAS 153 )
No tool found for object type '&1', object ID &2 (&3) ( CACSBAS 156 )
No tool/function found for object type "&1", method "&2", tool "&3" ( CACSBAS 157 )
No function module found for tool '&1', function '&2' (&3) ( CACSBAS 158 )
No parameter view found for tool "&1", function "&2" ( CACSBAS 159 )
View (&1) not found ( CACSBAS 160 )
No view has been defined for this tool ( CACSBAS 161 )
Parameter view (&1) is not based on expected table (&2) ( CACSBAS 162 )
Calculation procedure not found for object "&1" with tool "&2" ( CACSBAS 163 )
Call method "&1" for object "&2" ( CACSBAS 166 )
RFC error: &1&2 ( CACSBAS 170 )
No function module specified ( CACSBAS 171 )
Tool &4 could not be assigned to object &1 (&2) ( CACSBAS 188 )
Calculation service & not available ( CACSBAS 250 )
Rule object type & for calculation services not maintained ( CACSBAS 251 )
Rule &2 of object type &1 for calculation services not found ( CACSBAS 252 )
Rule &2 of object type &1 has no calculation service ( CACSBAS 253 )
Calculation service & not fully maintained ( CACSBAS 254 )
Event &1 for copying services is being executed ( CACSBAS 267 )
Running copy service &1 (pool &2) for structure &3 => &4 ( CACSBAS 268 )
Event &1 for copy service &2 => &3 not maintained ( CACSBAS 269 )
Event &1 for copy service &2 => &3 not known ( CACSBAS 270 )
Event & not recognized in system (copy service) ( CACSBAS 271 )
Generating copy service pool: & ( CACSBAS 272 )
Copying method &3 in pool &4 unknown (event &2 for application &1) ( CACSBAS 273 )
Copy service &3 => &4 for event &2 of application &1 failed ( CACSBAS 274 )
Event &2 for application &1 not known (copy service) ( CACSBAS 275 )
Event &1 does not recognize any active copy service &2 => &3: &4 ( CACSBAS 276 )
Copy source &3 has no field &4 (event &2 for application &1) ( CACSBAS 277 )
Copy target &3 has no field &4 (event &2 for application &1) ( CACSBAS 278 )
Generating copy service for event &1: &2 => &3 ( CACSBAS 279 )
Unused message ... ( CACSBAS 280 )
Unknown copying strategy &3 for tables ( CACSBAS 281 )
Missing index field "MAP_INDEX" in structure &3 ( CACSBAS 282 )
Field rule &1 in copy service &2 must not be changed ( CACSBAS 284 )
Not all form routine pools deleted! See long text! ( CACSBAS 298 )
Lock conflict in table &2 in form routine &1 ( CACSBAS 299 )
Object type &1 has no combination identification ( CACSBAS 303 )
More than one agreement found for object type &1 and COMB_ID &2 ( CACSBAS 305 )
More than one standard agreement found for standard contract &1 ( CACSBAS 312 )
BTE: Errors with remote function call in system &1 ( CACSBAS 400 )
BTE: Interface for event &1 not active ( CACSBAS 401 )
BTE: &1 active record(s) found for event &2 ( CACSBAS 402 )
BTE: More than one active record found for event &1 ( CACSBAS 407 )
Invalid changes to valuation item in user exit '&1' ( CACSBAS 408 )
Invalid changes to remuneration item in user exit '&1' ( CACSBAS 409 )
Invalid change to settlement item in user exit '&1' ( CACSBAS 410 )
Function module "&1" does not exist in the local installation ( CACSBAS 500 )
Viewcluster "&1" does not exist in the local installation ( CACSBAS 501 )
Viewcluster "&1" does not exist in installation &2 ( CACSBAS 502 )
You do not have authorization for object &1 in application &2 ( CACSBAS 701 )
User has not been assigned to a quantifying authorization group ( CACSBAS 702 )
Your authorization group has not been assigned any profiles ( CACSBAS 703 )
No entries for interface control in user master record ( CACSBAS 712 )
Authorization check of interface dispatcher: Internal error ( CACSBAS 713 )
Incorrect call of quality authorization check: object &1 ( CACSBAS 714 )
Enter a positive value ( CACSBAS 715 )
Enter a negative value ( CACSBAS 716 )
At least one entry in a reference table & is not covered in terms of time ( CACSBAS 751 )
Error (no. &) when carrying out changes in version management ( CACSBAS 754 )
Error when creating object ( CACSBAS 755 )
Because of versioning, Customizing entry may not be deleted ( CACSBAS 757 )
This entry is not in table & ( CACSBAS 758 )
One parameter was not transferred when calling up version management ( CACSBAS 761 )
No active entry was found in table &1 for event &2 - object: &3 ( CACSBAS 763 )
Start and end date may not be the same ( CACSBAS 767 )
Save data records before making changes ( CACSBAS 768 )
There is no active entry in table &1 ( CACSBAS 771 )
Minimum amount <= Standard amount, Standard amount <= Maximum amount ( CACSBAS 781 )
You have no authorization for this function ( CACSBAS 782 )
SAP Extension ICM is not active ( CACSBAS 799 )
Content "&2" in the &1 field does not correspond to the DDIC category ( CACSBAS 801 )
Error in screen layout &1: Category field incorrectly filled ( CACSBAS 830 )
Undefined, grouped conversion exit (TCACS_CONVGRP, &1) ( CACSBAS 831 )
Content of field &2 too large for grouped conversion exit &1 ( CACSBAS 832 )
Warning screen layout &1: Category field may have incorrect entry ( CACSBAS 833 )
Data element &1 does not exist ( CACSBAS 834 )
A data element with the specified text does not exist ( CACSBAS 835 )
We strongly recommend you do NOT change valuation type &1 ( CACSBAS 870 )
No internal number counter for field &1 found ( CACSBAS 885 )
Renumbering for &1 incorrect ( CACSBAS 886 )
Error in message transfer ( CACSBAS 888 )
Provisional number & does not fit the required variable ( CACSBAS 889 )
Future function - not available in this release ( CACSBAS 892 )
Missing message type or type "X" ( CACSBAS 894 )
Function not possible - reason: &1 ( CACSBAS 899 )
The system could not find a maintenance transaction ( CACSBDT 107 )
Template name (&1) begins with application (&2) ( CACSBS 002 )
Name of template (&1) does not allow for copying ( CACSBS 004 )
Foreign key for entry &1 is not entered ( CACSBS 060 )
Foreign key for entry &1 is located in wrong ISF package ( CACSBS 061 )
The application is also entered in table TISIS_APPL ( CACSCG 011 )
The application cannot be entered in table TISIS_APPL ( CACSCG 012 )
Maintain the commission application and client in table TISIS_APPL ( CACSCG 016 )
No entry found in log ( CACSCG 073 )
No currency defined for commission model & ( CACSCG 092 )
No workcenter scenario maintained for application & ( CACSCG 200 )
Commissions application & does not have a currency ( CACSCG 201 )
Navigation is not supported ( CACSCG 210 )
Not possible to save - see long text ( CACSCG 247 )
Not possible to save - see long text ( CACSCG 248 )
Not possible to save - see long text ( CACSCG 249 )
Not possible to save - see long text ( CACSCG 250 )
Not possible to save - see long text ( CACSCG 305 )
Not possible to save - see long text ( CACSCG 306 )
Not possible to save - see long text ( CACSCG 307 )
Deletion not possible ( CACSCG 340 )
&1 - Avoid locking and inconsistencies (see long text) ( CACSCG 359 )
Error while checking table TCACS_MTDTAB ( CACSCG 400 )
Global remuneration clearing agreement can have a maximum of 5 places ( CACSCG 402 )
Use transaction SM37 to track the generation status ( CACSCG 501 )
You cannot delete the database update for message types A or E ( CACSCG 706 )
&1 ( CACSCHECK 011 )
Table/structure &1 was ignored due to reason in exception table: &2 ( CACSCHECK 151 )
Cannot generate object for commission contract &1 ( CACSCOR 020 )
Cannot generate list of correspondence types (contract &1) ( CACSCOR 021 )
&1 commission document(s) is (are) being processed... ( CACSCR 102 )
&1 commission document(s) is (are) being processed... ( CACSCR1 102 )
&1 - Avoid locking and inconsistencies (see long text) ( CACSCUST 359 )
Target package &1 is already defined as an application ( CACSCUST 401 )
Unexpected error in class CL_CACS_TIMESTAMP_CONVERT ( CACSDBC 006 )
Inconsistent entries in fields &1 _DATE, &1 _TIME and &1 _TIMESTAMP ( CACSDBC 017 )
Inconsistencies between date/time fields and time stamp fields ( CACSDBC 021 )
Generated objects must not be used as source for additional fields ( CACSDESGEN 203 )
Field &1 is not contained in table/structure of origin &2 ( CACSDESGEN 411 )
Field &1 is already included in template &2 ( CACSDESGEN 413 )
Field &1 does not exist in any of the &2 structures ( CACSDESIGN 125 )
Process not possible as field already exists ( CACSDESIGN 133 )
Limits for number and length of fields in table &1 exceeded ( CACSDESIGN 139 )
Template object for &1 could not be determined ( CACSDESIGN 301 )
No object types found ( CACSDESIGNDB 421 )
The categories of business objects are defined elsewhere ( CACSDESIGNUI 152 )
The selected object already exists ( CACSDESIGNUI 204 )
You can only create objects in nodes without subnodes ( CACSDESIGNUI 208 )
Data inconsistency in the object hierarchy ( CACSDESIGNUI 451 )
Invalid processing mode &1 ( CACSDET 001 )
Error during dynamic generation of data for table &1 ( CACSDET 003 )
"Force" parameter must only be used in analysis mode ( CACSDET 015 )
Force parameter has invalid determination type &1 ( CACSDET 016 )
No valid version found for standard contract &1 ( CACSDET 017 )
No valid version found for standard agreement &1 (settlement type &2) ( CACSDET 019 )
No valid version found for combination ID &1 ( CACSDET 020 )
No valid version found for commission contract &1 ( CACSDET 021 )
No valid version found for check object ( CACSDET 031 )
Maximum depth &1 of determination process reached for combination '&2' ( CACSDET 033 )
Error in determination of combination type for combination '&1' ( CACSDET 034 )
Determination of generic result type must only be used in analysis mode ( CACSDET 039 )
Invalid entry point '&1' supplied - entry point '&2' expected ( CACSDET 040 )
Cannot use determination combination of analysis mode ( CACSDET 053 )
No valid version of selection rule &1 found ( CACSDET 084 )
&1 selection ID(s) determined successfully ( CACSDET 086 )
No selection IDs could be determined from selection table &1 ( CACSDET 087 )
No entries found for attributes ( CACSDET 089 )
Combination assignment failed ( CACSDET 091 )
No valid version of rule group &1 found ( CACSDET 122 )
No valid version of participation construction found ( CACSDET 125 )
No valid version of settlement type &1 found ( CACSDET 126 )
Assignment combination &1 for selection ID &2 has filled filter values ( CACSDET 129 )
No valid version of attributes of assignment rule found ( CACSDET 135 )
No contract data was transferred for determination of ELT rule ( CACSELT 000 )
Technical error; no structures for settlement scheduling exist ( CACSELT 013 )
Quantities and amounts are mixed ( CACSELT 014 )
More than one set with &1 found for remuneration line &2 ( CACSELT 023 )
Only customer fields may be changed in method &1 of BAdI &2 ( CACSELT 028 )
Package CACS44 must be active ( CACSELT 034 )
A technical error occurred while attempting to copy standard Customizing ( CACSELT 037 )
Specify an enterprise commission contract for &1 ( CACSELT 050 )
Corrected disbursable entitlement is incorrect ( CACSELT 055 )
Set contains no entitlement and liability transfer ( CACSELT 057 )
Transfer share for &1 must be between 0% and 100% ( CACSELT 058 )
&1 is not permitted as a recalculation indicator ( CACSELT 059 )
&1 is not a valid type of remuneration scheduling ( CACSELT 060 )
&1 is not a permitted type of payout ( CACSELT 061 )
Receiving contract &1 is included in more than one set for &2 ( CACSELT 063 )
More than one instruction exists for receiving contract &1 and remun. &2 ( CACSELT 064 )
Remuneration type &1 is excluded from entitlement and liability transfer ( CACSELT 065 )
Entitlement cannot be recalculated (no commission case) ( CACSELT 068 )
No recalculation due to result value splitting of source entitlement ( CACSELT 075 )
Remuneration agreement for original remuneration is unknown ( CACSELT 076 )
Remuneration agreement &1 is not permitted for contract &2 ( CACSELT 077 )
Reduction as a result of difference commission: &1 &2 ( CACSELT 081 )
Technical error: transfer document &1/&2 incorrect on database ( CACSELT 086 )
Remuneration agreement &1 is not assigned to contract &2 ( CACSELT 088 )
Remuneration agreement &1 not found for contract &2 ( CACSELT 089 )
Remuneration share cannot be determined ( CACSELT 092 )
No remuneration scheduling found for remuneration line &1 ( CACSELT 094 )
Different currency in &1 &2: &3 instead of &4 ( CACSELT 095 )
Different unit of measure in &1 &2: &3 instead of &4 ( CACSELT 096 )
&1 is not a valid value for indicator &2 ( CACSELT 097 )
Assignment share for &1 must be between 0% and 100% ( CACSELT 098 )
Total of assignment share for &1 must be between 0% and 100% ( CACSELT 099 )
Internal error: Parameter record for assignment instruction &1/&2/&3/&4 ( CACSELT 100 )
Inconsistency: stt. item and stt. schedule of transferring remuneration ( CACSELT 102 )
Unable to transfer the date details ( CACSELT 103 )
No settlement scheduling for entitlement &1, no dates transferred ( CACSELT 104 )
Internal error: distribution table could not be generated ( CACSELT 105 )
Internal error: generation of local work areas failed ( CACSELT 106 )
Amounts and quantities are mixed in remuneration to be transferred ( CACSELT 107 )
Status of settlement schedule &1 is set to 'inactive' ( CACSELT 109 )
No settlement scheduling possible in incorrect transfer document &1 ( CACSELT 110 )
New settlement schedule being created for remuneration line &1 ( CACSELT 111 )
Scheduling rule &2 is not assigned to contract &1 ( CACSELT 112 )
Release rule &2 is not assigned to contract &1 ( CACSELT 113 )
New settlement schedule being created for remuneration line &1 ( CACSELT 115 )
Error while determining release rules for commission contract ( CACSELT 116 )
Scenario is not supported: groupings of due dates ( CACSELT 117 )
Error while determining ELT rule for assignment rule '&1' ( CACSELT 118 )
Entitlement cannot be recalculated (no performance-related remuneration) ( CACSELT 119 )
&1 is not a valid value for basis of liability transfer percentage rate ( CACSELT 120 )
Remuneration line &1/&2/&3 has no transferable entitlement ( CACSELT 122 )
Remuneration line &1/&2/&3 does not have any transferable liability ( CACSELT 123 )
Total of settlement items is different from disbursable entitlement ( CACSELT 126 )
Inconsistent update of enterprise commission contract ( CACSELT 130 )
Possible error in update of difference &1/enterprise commission contract ( CACSELT 131 )
Liability transfer is not possible; package CACS03 is not selected ( CACSELT 132 )
Commission case is inconsistent; fields for liability are missing ( CACSELT 133 )
Document type &1 is not permitted for transfer documents ( CACSELT 137 )
Document type &1 can only be posted in the process ( CACSELT 139 )
Transfer doc. must not have any reference to triggering commission case ( CACSELT 140 )
Business object is not fully specified ( CACSELT 141 )
Remunerating business transaction specified incompletely or not at all ( CACSELT 142 )
Triggering business transaction not fully specified ( CACSELT 143 )
&1: document identification incorrect (&2 does not equal &3) ( CACSELT 146 )
Contract currency of remaining remuneration must be &2 ( CACSELT 153 )
Contract of remaining remuneration must be &2 ( CACSELT 154 )
Reference to remunerating commission case must be complete ( CACSELT 155 )
No valuation line &1 exists in document &2 ( CACSELT 158 )
Contract currency for entitlement or liability recipient must be &2 ( CACSELT 161 )
New entitlement/liability must reference commission case &2 ( CACSELT 162 )
New entitlement/liability must reference valuation &2 ( CACSELT 163 )
Entitlement total in transfer doc. does not equal original entitlement ( CACSELT 164 )
Disbursement total in transfer doc. does not equal original disbursement ( CACSELT 165 )
Liability total in transfer doc. does not equal original liability ( CACSELT 166 )
Offsetting total in transfer doc. does not equal original offsetting ( CACSELT 167 )
Remuneration line to be transferred (&1/&2/&3) must not be reversed ( CACSELT 173 )
Remuneration line to be transferred (&1/&2/&3) must not be corrected ( CACSELT 174 )
Transfer document corrects more than one remuneration line ( CACSELT 176 )
No document reference set in remuneration &1 to be transferred ( CACSELT 177 )
Document reference of remuneration line &1 is not correct ( CACSELT 178 )
Remuneration line to be transferred (&1/&2/&3) must have 'posted' status ( CACSELT 180 )
Contract &1 has no settlement agreement for remuneration type &2 ( CACSELT 181 )
Settlement schedule &1 is inconsistent ( CACSELT 183 )
Settlement schedule item must not have status &1 ( CACSELT 185 )
Canceled due to failed credentials check ( CACSELT 186 )
Amounts or quantities in the clearing item are incorrect ( CACSELT 189 )
Clearing items cannot be transferred ( CACSELT 190 )
Transfer documents exist for commission document &1/&2 ( CACSELT 210 )
Settlement schedule for remuneration &1 has no open items ( CACSELT 214 )
ELT document &1: &2/&3 will not be reversed ( CACSELTENH 001 )
Cannot transfer commission document &1 ( CACSELTENH 003 )
Calculation date &1 is before start date &2 of agreement &3 ( CACSFLATTD 028 )
Calculation date &1 is after/same as end date &2 of agreement &3 ( CACSFLATTD 029 )
Contract &1 remuneration type &2 period rule &3 period &4 was not reset ( CACSFLATTD 030 )
Reset contract &1 with remun.type &2 period rule &3 and period &4 ( CACSFLATTD 031 )
Commission contract &1 is legally terminated on &2 (end date &3) ( CACSFLATTD 034 )
Standard contract &1 is not of category &2 in valuation period ( CACSFM 205 )
No entries found in table &1 for these input values ( CACSFM 206 )
No valid selection tables exist for application &1 ( CACSFM 207 )
Inconsistent structure or table &1 during dynamic assignment ( CACSFM 209 )
You are not authorized to change a commission application ( CACSGEN 005 )
Software component &1 not yet involved in generation ( CACSGEN 011 )
Commission application or system is out of date ( CACSGEN 012 )
Unexpected software component involved in generation (such as &1) ( CACSGEN 013 )
The selection may not contain gaps ( CACSGEN 023 )
Cross-application generation (log under YYYALL) ( CACSGEN 027 )
Structure &1 could not be activated (see long text!) ( CACSGEN 114 )
Field &1 from table &2 could not be included in view &3 ( CACSGEN 207 )
Not able to activate class/interface &1 ( CACSGEN 257 )
Errors occurred when generating the maintenance function for &1 ( CACSGEN 517 )
Multiple entries found for package &1 in TCACS_REG_PART table ( CACSGEN 865 )
Interface is in simulation mode - no DB update ( CACSIB 007 )
Commission case &1: &2/&3 (&4) accepted at interface ( CACSIB 012 )
Commission case &1: &2/&3 (&4) set to pending ( CACSIB 013 )
Commission case &1: &2/&3 (&4) - Status change cancelled ( CACSIB 019 )
Commission case &1: &2/&3 (&4) - Posting cancelled by processor ( CACSIB 020 )
Commission case &1: &2/&3 (&4) - Change cancelled by processor ( CACSIB 021 )
Commission case key is inconsistent ( CACSIB 037 )
Inconsistent commission case; Action not possible ( CACSIB 038 )
Inconsistent commission case; Data inconsistent ( CACSIB 039 )
Required calculation date &1 is in the future ( CACSIB 040 )
Select a participant ( CACSIB 042 )
Invalid external number &1 in field &2 for number counter &3 ( CACSIB 043 )
Error during renumbering of &1 ( CACSIB 044 )
Unknown processing category '&' ( CACSIB 050 )
Subobjects were assigned to commission case &1/&2 (&3) ( CACSIB 052 )
Document header: Invalid entries in commission case reference ( CACSIB 054 )
Invalid valuations filled ( CACSIB 055 )
Invalid object reference in remuneration ( CACSIB 056 )
Document header: Invalid entries in business object/transaction ref. ( CACSIB 058 )
Document header: Invalid entries in document reference ( CACSIB 059 )
Document must not contain a remuneration balance ( CACSIB 061 )
Invalid amount in commission model currency in remuneration line ( CACSIB 063 )
Invalid field filled in remuneration row ( CACSIB 064 )
Invalid remuneration amount in contract currency in remuneration row ( CACSIB 066 )
No reference to remuneration line ( CACSIB 068 )
No reference exists to remuneration line ( CACSIB 069 )
Contract numbers for remuneration and settlement do not match ( CACSIB 070 )
Special commission: More than one instance of variance record & ( CACSIB 072 )
Document must not have a balance for transfer postings ( CACSIB 073 )
Special commission: More than one instance of variance record & ( CACSIB 076 )
Settlement item(s) removed ( CACSIB 077 )
Case/document &2: Field &1 does not contain a numeric value ( CACSIB 081 )
Unknown document type '&1' ( CACSIB 082 )
&1 entries removed from &2 ( CACSIB 090 )
Table &1 has key &2 more than once ( CACSIB 095 )
No number range available for application &1 processing ( CACSIB 099 )
Work mode & is not allowed in the commission interface ( CACSIB 101 )
Requested system version different from version found ( CACSIB 104 )
Business object &/& (&) not fully specified ( CACSIB 105 )
Business transaction &/& (&) not fully specified ( CACSIB 106 )
Special commission recipient & is not part of the commission case ( CACSIB 110 )
Higher-level object &/& for object &/& unknown ( CACSIB 113 )
Business transaction &/& for business object &/& not unique ( CACSIB 117 )
Businuess object &/& for business transaction &/& already in the system ( CACSIB 118 )
Object &/& was entered under object &/& ( CACSIB 123 )
&: & participants of the participation & do not have a share ( CACSIB 125 )
&: Total of the participation & is greater than 100% ( CACSIB 126 )
&: Total of the particpation & less than 100% ( CACSIB 127 )
Business transaction &/& for business object &/& is not changeable ( CACSIB 130 )
Business object &1/&2 already in the system in version &3 ( CACSIB 133 )
Business object &1/&2 waiting in the system in version &3 ( CACSIB 134 )
Particpation relationship &1 (&2) does not belong to a participant ( CACSIB 136 )
Relationship &3/&2 has invalid higher-level participant &1/&2 ( CACSIB 137 )
Role &4 does not have entitlement category &3 ( CACSIB 138 )
Entitlement refers to invalid, triggering participant ( CACSIB 139 )
Entitlement does not refer to any triggering participant ( CACSIB 140 )
Entitlement may not come from own participation ( CACSIB 141 )
Correction to entitlement object and initiator ( CACSIB 142 )
Business object &1/&2 does not allow entitlement categories (&3, &4) ( CACSIB 143 )
Participant &1/&2 has an inconsistent entitlement category '&3' ( CACSIB 144 )
Hierarchy cycle for participants &1/&2 for entitlement category &3 ( CACSIB 145 )
External subobject &/& for business object &/& already in system ( CACSIB 152 )
External subobject &/& for business object &/& not in system ( CACSIB 153 )
External subobject &/& in commission case not named in bundling ( CACSIB 154 )
External subobject &/& in business object &/& already bundled ( CACSIB 155 )
External subobject &/& in business object &/& not bundled ( CACSIB 156 )
Appliction &1 has currency &2, commission case currency &3 not allowed ( CACSIB 157 )
No data for external subobject &/& for bundle in business object &/& ( CACSIB 158 )
Special commission type & is performance-related ( CACSIB 162 )
Special commission item &1 has not been maintained correctly: &2 ( CACSIB 163 )
Special remuneration &2 in item &1 is not performance-related ( CACSIB 164 )
Special remuneration currency in item &1 set to &2 ( CACSIB 165 )
Special remuneration type & is performance-related ( CACSIB 167 )
Business object &/& (&) already has more recent version & in system ( CACSIB 168 )
Remunerating business transaction &1/&2 contains version &3 ( CACSIB 171 )
Enter either remuneration type or settlement type ( CACSIB 172 )
Settlement type references remuneration group ( CACSIB 173 )
Special remuneration item & contains invalid character '*' ( CACSIB 180 )
External subobject &/& for business object &/&: Internal error ( CACSIB 182 )
Business object &1/&2 has been locked ( CACSIB 185 )
External subobject &1 for business object &2 still being used by &3 ( CACSIB 186 )
No commission case for business transaction &2 in business object &1 ( CACSIB 187 )
External subobject &1/&2; Rebundling in a business object ( CACSIB 188 )
Check special remuneration item &1; &2 ( CACSIB 189 )
Business object &/& (&) already version for & in the system ( CACSIB 190 )
Subobject &/& for business object &/& is unknown (rebundling) ( CACSIB 191 )
Business object &1/&2 already in system with start date &3 ( CACSIB 192 )
Application & is live - version '*' is therefore not allowed ( CACSIB 197 )
Cancellation of interface function, no pending posting ( CACSIB 199 )
Commission case &/&/& (&) does not exist in the required form ( CACSIB 201 )
Business object &1 needs unique detailed description ( CACSIB 206 )
Interface data is inconsistent; Record category & ( CACSIB 207 )
Transaction currency not filled, commission model currency &2 is set ( CACSIB 209 )
Process event &1 (ID &2) ( CACSIB 307 )
Processing target &1 was not possible: Status - &2 ( CACSIB 314 )
Exception &2 was triggered while calling function module &1 ( CACSIB 348 )
Call of function &1 by RFC in system &2 contains errors (&3) ( CACSIB 382 )
Portfolio assignment structure &1 must be known in calling system ( CACSIB 385 )
Local structure &1 must match structure &2 in system &3 ( CACSIB 386 )
No commission contract could be determined for business object &1/&2 ( CACSIB 390 )
Maximum length of field &1 is &2 ( CACSIB 392 )
&1 row(s) copied, &2 row(s) ignored ( CACSIB 399 )
Contract number & is not maintained in PD-Org ( CACSIB 402 )
Contract & was not assigned at &: & ( CACSIB 403 )
Position & not assigned to any organizational unit ( CACSIB 404 )
No current plan variant set ( CACSIB 406 )
No more objects found for object & & with evaluation method & ( CACSIB 418 )
Enter the correct relationship between client and application ( CACSIB 432 )
Enter the correct contract type '02' for commission application & ( CACSIB 433 )
Participation &: Alt. ind. participant & has no indirect role category ( CACSIB 440 )
Participation &: Direct participant & has no direct role category ( CACSIB 443 )
Delete old assignment ( CACSIB 449 )
Undescribed error when calling qualification management ( CACSIB 460 )
Contract & is stopping commission case (obsolete) ( CACSIB 466 )
Historical commission case &1/&2 is stopping current commission case ( CACSIB 467 )
Business partner & does not exist in the required BP role ( CACSIB 468 )
Commission case to wait for business trans. &1/&2 before rebundling ( CACSIB 469 )
Contract period (&, &) and object period (&, &) are not the same ( CACSIB 471 )
Position - org. unit; Period does not cover staff assignment period ( CACSIB 472 )
Business partner ID &2 overwritten by commission contract partner &3 ( CACSIB 473 )
Entitlement category &1 not allowed for business object type &2 ( CACSIB 481 )
Entitlement category &1 cannot be processed ( CACSIB 482 )
Contract &1 cannot be used for date &2 ( CACSIB 483 )
New processing target &1 not allowed ( CACSIB 484 )
New processing target &1 set ( CACSIB 485 )
New processing target &1 not allowed ( CACSIB 486 )
Contract could not be found ( CACSIB 487 )
Contract &2 was found for business partner &1 ( CACSIB 488 )
Percentage not entered for share key ( CACSIB 490 )
Staff reassignment not allowed from time of link start ( CACSIB 491 )
You do not have processor authorization ( CACSIB 501 )
You are not authorized to change & ( CACSIB 502 )
You do not have posting authorization ( CACSIB 503 )
You do not have authorization for application & ( CACSIB 504 )
You do not have authorization for dual releases in application "&" ( CACSIB 505 )
Error while contract brought forward; Object & only starts from & ( CACSIB 506 )
Staff assignment changes are saved actively ( CACSIB 508 )
Enter a disbursement recipient ( CACSIB 509 )
Pending cases log entry &1 could not be written ( CACSIB 601 )
Application & unknown ( CACSIB 603 )
Application & ist operational - DATA WILL BE DELETED ( CACSIB 604 )
You are not authorized for this action ( CACSIB 605 )
WARNING: ALL transaction data will be deleted from the tables ( CACSIB 606 )
Application & is operational - deletion not possible ( CACSIB 607 )
Table &: Techn. error: "version" not last key field ( CACSIB 657 )
Program started to delete sample data *** & *** ( CACSIB 660 )
&1/&2: Ext.ID for superior subobj. missing; no determination possible ( CACSIB 703 )
Identical constellation for several participants ( CACSIB 801 )
Error during determination of installed packages for application &1 ( CACSIB 863 )
Enter a business object category and a business object ID ( CACSIB 864 )
Only invalid remunerations exist for the selection ( CACSIB 867 )
Error in determination of periods in function module &1 ( CACSIB 870 )
Calculation of potential entitlements ended with errors ( CACSIB 872 )
Simulation of target agreements requires a unique posting date ( CACSIB 873 )
Participation cannot be deleted ( CACSIB_BDTI 050 )
Data selection too large ( CACSIB_BDTI 060 )
Participants may have been renumbered after deletion ( CACSIB_BDTI 062 )
A variant name must not begin with an underscore (_), reserved for import ( CACSIB_BDTI 107 )
Function group &1 does not exist ( CACSIB_BDTI 115 )
Copying successful ( CACSIB_BDTI 160 )
Error during copying ( CACSIB_BDTI 161 )
Entitlement object type for entitlement cat. &1 could not be determined ( CACSIB_BDTI 200 )
Case to be checked; Display only ( CACSIB_BDTI 222 )
Requested business object &2 is currently locked by user &1 ( CACSIB_CASE 001 )
Business object &1 locked in RCP worklist &2 with status &3 ( CACSIB_CASE 003 )
Business object has no subobject of type &1 ( CACSIB_CASE 102 )
Business object has multiple subobjects of type &1 ( CACSIB_CASE 103 )
Commission case & ( CACSIB_COI 011 )
Commission case '&1' was manually changed; resetting is not possible ( CACSIB_COI 015 )
Commission case '&1'/'&2' ended with errors; status: '&3' ( CACSIB_COI 020 )
Subroutine pool not known ( CACSIB_EDT 118 )
Error while positioning pointer in file &1 ( CACSIB_EDT 201 )
File &1 is not open ( CACSIB_EDT 202 )
Generation of data container failed during runtime ( CACSIB_EDT 203 )
Accessing data container &3 failed ( CACSIB_EDT 204 )
Unknown record type '&1' ( CACSIB_EDT 205 )
Record type &1 may only be used once in file &2 ( CACSIB_EDT 206 )
Incorrect sequence of record types ( CACSIB_EDT 207 )
Parameter &1(&2) must only be defined once for each file ( CACSIB_EDT 208 )
Unknown DDIC information file ( CACSIB_EDT 209 )
Opening DDIC information file &1 failed ( CACSIB_EDT 210 )
Error when reading from file &1 ( CACSIB_EDT 211 )
DDIC information file &1 could not be analyzed ( CACSIB_EDT 212 )
Incorrect grouping criterion ( CACSIB_EDT 213 )
Value of grouping criterion in commission case is not unique ( CACSIB_EDT 215 )
Error while accessing field &1(record type &2) ( CACSIB_EDT 216 )
Error in SUBPOOL row & word & offset &: & ( CACSIS 100 )
Error & occurred in FM RKD_SHORT_TEXT_GENERATE_30 ( CACSIS 102 )
Include: & row: & word: &: & Read the long text ( CACSIS 104 )
Only call this report using report/report interface ( CACSIS 108 )
Fields & have not been clearly restricted ( CACSIS 109 )
The name entered & is neither a table nor a view ( CACSIS 110 )
Select exactly one document ( CACSIS 111 )
No standard report defined for transactions for contract ( CACSIS 113 )
Contract number could not be assigned to report & ( CACSIS 114 )
Select a root node for hierarchy display ( CACSIS 120 )
Customizing error: No evaluation path defined for drilldown report ( CACSIS 121 )
Customizing error: No report defined for service "&" ( CACSIS 122 )
Report "&" not configured for this function ( CACSIS 123 )
No report defined for menu path ( CACSIS 125 )
Report type &1 not active ( CACSIS 301 )
Generated report type &1 could not be activated ( CACSIS 302 )
Incorrect source structure &1 ( CACSIS 305 )
Report type &1: &2 fields entered in field catalog ( CACSIS 310 )
Report type &1: &2 / &3 fields entered in field catalog ( CACSIS 311 )
Report type &1: &2 fields entered in charact. dependencies ( CACSIS 312 )
Report type &1: &2 / &3 fields entered in characteristic dependencies ( CACSIS 313 )
No model currency defined for the ICM application in table TCACS_GLOB ( CACSLCC 001 )
More than one model currency valid for application in table TCACS_GLOB ( CACSLCC 002 )
Condition currency <> application currency for busi_begin=&1 busi_end=&2 ( CACSLCC 005 )
Calculation timestamp &1 earlier than application conversion timestamp &2 ( CACSLCC 022 )
No condition needs to be converted ( CACSLCC 059 )
Jobs for rebuild of total tables created successfully; check job log ( CACSLCC 150 )
Check job log ( CACSLCC 151 )
No ISF packages exist for application &1 ( CACSLCC 300 )
No template matching events for ISF package &1 ( CACSLCC 301 )
Run definition for event &1 of application &2 ( CACSLCC 310 )
Run started for process ID & ( CACSLCC 312 )
SQL error in function module & ( CACSLCC 315 )
Matching process completed successfuly for application & ( CACSLCC 318 )
Matching process ended with errors for application & ( CACSLCC 319 )
Source program CACS_LCC_MATCH_PRG is not registerd in EWUPGSTAT ( CACSLCC 323 )
Execute transaction CACS_LCC_MATCH_LOG to see matching process detail log ( CACSLCC 325 )
Value "&" cannot be converted to a valid currency format ( CACSMD 021 )
Selected function is not possible in initial screen ( CACSMD 022 )
Remuneration type cannot be added in the target system ( CACSMD 027 )
Enter a version number for the contract template ( CACSMD 031 )
Technical time stamp for time spot A reset to current one ( CACSMD 038 )
Technical timestamp for time spot B reset to current one ( CACSMD 039 )
Enter all date details ( CACSMD 040 )
Enter version number & or & ( CACSMD 046 )
You are not authorized to use contract & as a contract template ( CACSMD 049 )
No active version is available ( CACSMD 060 )
No database field name could be found ( CACSMD 061 )
&1 &2 cannot be saved actively ( CACSMD 070 )
&1 &2 cannot be saved actively ( CACSMD 071 )
Version template from application &1 was not transferred completely ( CACSMD 072 )
&1 &2 cannot be transferred from the version template ( CACSMD 073 )
Not all BDT applications have been assigned ( CACSMD 075 )
Not all BDT events have been set up correctly ( CACSMD 076 )
The number specified is in the critical area of number range & ( CACSMD 081 )
The specified number is the last in number range & ( CACSMD 082 )
No more numbers are free in number range & ( CACSMD 083 )
Commission contract & does not exist ( CACSMD 102 )
No valid commission contract exists for date & ( CACSMD 103 )
Standard contract & does not exist ( CACSMD 104 )
Business partner & does not exist ( CACSMD 105 )
Enter a contract currency ( CACSMD 107 )
Business partner & was only created on & ( CACSMD 111 )
Effective date limitation ( CACSMD 121 )
To renew a contract, the new start date must equal the old end date ( CACSMD 138 )
Standard contract &1 only covers the period between &2 and &3 ( CACSMD 140 )
Version template is parked: Use time interval &1 ( CACSMD 143 )
Standard contract &1 has not been released as a contract template for &2 ( CACSMD 146 )
Contract & only saved inactively ( CACSMD 164 )
Invalid settlement type for disbursement ( CACSMD 173 )
Business partner & does not exist in role "commission contract partner" ( CACSMD 202 )
There are &2 due date document items for commission contract &1 ( CACSMD 213 )
There are &2 remuneration rows for commission contract &1 ( CACSMD 214 )
There are &2 commission case participations for commission contract &1 ( CACSMD 215 )
There are &2 different commissions for commission contract &1 ( CACSMD 216 )
Contract currency change ( CACSMD 221 )
There is already a commission contract for commission contract partner & ( CACSMD 222 )
No standard contract in the system with this validity date ( CACSMD 223 )
When you save contract &, & active versions become invalid ( CACSMD 225 )
Start of commission contract & is moved back ( CACSMD 227 )
Not all agreements are taken over from the contract template ( CACSMD 228 )
The previous version is overwritten when you save ( CACSMD 229 )
Agreement bundle number chosen (BUCAGR_ID) &1 has already been assigned ( CACSMD 233 )
Change of contract currency with effective start date &1 ( CACSMD 238 )
Different currencies found - select a different period ( CACSMD 239 )
No retroactive changes possible for selected version ( CACSMD 241 )
You cannot issue flat-rate remuneration (remuneration type &) > & ( CACSMD 251 )
You cannot issue guarantee confirmation (remuneration type &) > & ( CACSMD 252 )
You may not make disbursements > & ( CACSMD 253 )
You may not make a disbursement < & ( CACSMD 254 )
Commission contract partner &1 has already been flagged for archiving ( CACSMD 265 )
Std commission contract for commission contract partner &1 not permitted ( CACSMD 281 )
Partner type '&' not permitted due to existing commission contracts ( CACSMD 282 )
External partner number &1 for contract &2 not processed when changed ( CACSMD 283 )
Higher-level &1 already assigned at lower-level in the processing period ( CACSMD 289 )
Contract bundle & does not exist ( CACSMD 302 )
No valid contract bundle for date & ( CACSMD 303 )
If you wish to change the standard contract, read the message long text ( CACSMD 309 )
Contract &1 is currently being processed by &2 ( CACSMD 310 )
Contract &1 is currently being processed by &2 ( CACSMD 311 )
Effective date limitation ( CACSMD 321 )
Contract bundle & was only saved inactively ( CACSMD 364 )
Commission contract &1 is only valid until &2 ( CACSMD 367 )
Contract bundle &1 is only valid until &2 ( CACSMD 368 )
Contract bundle &1 is not legally valid at time-spot &2 ( CACSMD 374 )
No retroactive changes possible for selected version ( CACSMD 441 )
The start of contract bundle & is put back ( CACSMD 442 )
No combination ID found for agreement category &1 ( CACSMD 505 )
Table &1: No entry found for these attributes ( CACSMD 511 )
Generated selection tables/evaluation objects determined for comb. ID &1 ( CACSMD 521 )
The correspondence type does not exist in the system ( CACSMD 601 )
External correspondence type & invalid ( CACSMD 606 )
& & invalid ( CACSMD 608 )
& & invalid ( CACSMD 609 )
Position not defined ( CACSMD 701 )
The organizational unit does not exist ( CACSMD 702 )
No valid evaluation path for event (&1, &2) ( CACSMD 712 )
&1: Internal error ( CACSMD 713 )
Function &1 could not be carried out for application &2 ( CACSMD 714 )
Start of scheduling rule is outside the period ( CACSMD 832 )
End of scheduling rule is outside the period ( CACSMD 833 )
Cannot determine staff role ( CACSMD 851 )
The HR -> BP interface is not active ( CACSMD 852 )
Central person &1 of employee &2 was deleted ( CACSMD 855 )
Business partner &1 was linked to central person &2 ( CACSMD 856 )
Employee &1: No data found for infotype &2 ( CACSMD 860 )
No employee found for business partner &1 ( CACSMD 861 )
HR is not the settlement target system in any application ( CACSMD 864 )
Business partner &1 was partially adjusted to HR employee &2 ( CACSMD 865 )
Problems with connecting BP &1 and HR employee &2 ( CACSMD 868 )
No business partners/employees to be assigned were found ( CACSMD 869 )
Linking of central person &1 with BP &2 changed to BP &3 ( CACSMD 870 )
You do not have the necessary authorization for this operation ( CACSMD 871 )
HR -> BP interface is not active ( CACSMD 872 )
No target system has been specified ( CACSMD 873 )
Employee &1 not entered yet -> no adjustment ( CACSMD 874 )
Job for adjustment report could not be created (return code &1) ( CACSMD 881 )
Saving is not possible; See long text ( CACSMD 899 )
Error messages cannot be collected ( CACSMENUE 011 )
No applications can be selected yet ( CACSMENUE 012 )
No data is maintained for this action ( CACSMENUE 017 )
Database operation &1 for updating worklist is not possible ( CACSOA 003 )
Number assignment error during update of worklist ( CACSOA 005 )
Invalid call of database interface for worklists ( CACSOA 006 )
A database error has occurred during worklist update ( CACSOA 007 )
Method '&1' is not valid in applicion plug '&2' ( CACSOA 009 )
Error while deleting assignment instructions in assignment set &1 ( CACSOA 013 )
Error while deleting assignment instructions in group &1 ( CACSOA 014 )
Error while deleting elements of assignment group &1 ( CACSOA 016 )
Error while deleting elements of assignment set &1 ( CACSOA 017 )
Error while reading assignment groups for worklist &1 ( CACSOA 019 )
Error while reading parameters in assignment set &1 ( CACSOA 021 )
Error while making assignments for assignment set &1 ( CACSOA 022 )
Error during exchange of data definition for returning object data ( CACSOA 023 )
No configuration for assignment rule &1 in &3 at time-spot &2 ( CACSOA 024 )
Error while reading assignment instructions in assignment set &1 ( CACSOA 025 )
Error while reading object data in the connected application ( CACSOA 026 )
Error while executing method &1 on worklist &2 ( CACSOA 027 )
Error while scheduling background processing of process step &1 ( CACSOA 028 )
Error while executing step &1 in process &2 ( CACSOA 029 )
Error while attempting to send user interface for process control ( CACSOA 030 )
Error while determining step to be executed in process &1 ( CACSOA 032 )
Error while reading process step &1 in process &2 ( CACSOA 033 )
No interface for '&1', structure '&2', method '&3', type '&4' ( CACSOA 038 )
Error while creating assignment group ( CACSOA 041 )
Error while reading elements of assignment group &1 ( CACSOA 047 )
Number assignment error during update of process ( CACSOA 050 )
Invalid call of update for assignment process ( CACSOA 051 )
Hitlist with &1 elements exceeds the specified maximum number ( CACSOA 062 )
A period-dependent assignment is only possible with a validity period ( CACSOA 063 )
Error while attempting to create worklist with definition &1 ( CACSOA 065 )
A technical error has occurred while executing method '&1' ( CACSOA 068 )
Technical error while creating or activating the selected workflow ( CACSOA 070 )
Error while updating Customizing ( CACSOA 071 )
Error while determining next release level for process step ( CACSOA 075 )
User interface could not be added to transport ( CACSOA 081 )
Error while attempting to create application log ( CACSOA 085 )
Error while deleting worklist &1 ( CACSOA 088 )
Error while deleting assignment groups for worklist &1 ( CACSOA 089 )
Error while saving workflow ( CACSOA 091 )
Technical error while generating interface ( CACSOA 092 )
Error while reading application log ( CACSOA 094 )
Error while attempting to read configuration of application plug &1 ( CACSOA 095 )
Error while writing application log ( CACSOA 100 )
Error while instancing assignment process &1 ( CACSOA 101 )
Error while saving assignment process &1 ( CACSOA 102 )
Error while saving worklist &1 ( CACSOA 103 )
Error while attempting to start workflow &1 for process &2 ( CACSOA 104 )
No description exists for objects types participating in assignment ( CACSOA 105 )
Technical error during dynamic typing of object data ( CACSOA 106 )
Error while attempting to create process with definition &1 ( CACSOA 110 )
Error while scheduling background processing of worklist &1 ( CACSOA 111 )
Error while selecting object based on current selection set ( CACSOA 112 )
Error during exchange of table definition for returning object data ( CACSOA 113 )
Error while attempting to display application log ( CACSOA 118 )
Error during registration of generated user interface ( CACSOA 121 )
Error while executing customer implementation for for BAdI definition &1 ( CACSOA 122 )
Error while instancing process step &1 ( CACSOA 124 )
Error while attempting to read variant &1 for interface &2 ( CACSOA 126 )
A technical error has occurred in the user interface ( CACSOA 127 )
Error while reading elements in assignment set &1 ( CACSOA 128 )
A database error has occurred while updating assignment processes ( CACSOA 130 )
Error while reading process &1 ( CACSOA 132 )
No workflow started for process &1 ( CACSOA 133 )
Error while attempting to display related list of background jobs ( CACSOA 134 )
Error while attempting to set a lock ( CACSOA 138 )
A techical error has occurred while attempting to set up a workflow event ( CACSOA 142 )
Error while reading attributes of process step &1 ( CACSOA 144 )
Job &1 with method &2 scheduled in worklist &3 for event &4 ( CACSOA 151 )
Job &1 for process step &2 scheduled in process &3 for event &4 ( CACSOA 155 )
Selection set with no restrictions for selecting from table &1 ( CACSOA 157 )
No workflow template has been specified for process '&1' ( CACSOA 165 )
Not all interfaces defined for worklist exist ( CACSOA 170 )
Not all functions defined in application plug '&1' exist ( CACSOA 171 )
&1 hit(s) excluded due to current assignment activity ( CACSOA 182 )
Worklist '&1' can only be edited with process '&2' ( CACSOA 183 )
Cannot lock worklist '&1' due to long-term lock ( CACSOA 194 )
Step &1 in process &2 cannot be locked due to long-term lock ( CACSOA 197 )
Long-term lock for step '&1' in process '&2' was successfully deleted ( CACSOA 198 )
None or multiple active implementations for BAdI &1 and filter &2 ( CACSOA 207 )
Dialog processing is not allowed due to expected runtime ( CACSOA 218 )
Assignment group '&1' has no open assignment sets ( CACSOA 219 )
Assignment group '&1' has no instructions for processing ( CACSOA 220 )
No worklist can be created for the chosen definition ( CACSOA 231 )
No process can be created for the chosen definition ( CACSOA 232 )
Error on external database during commit change ( CACSOA 233 )
Error on local database during commit change ( CACSOA 234 )
Error in package dependencies ( CACSPACK 012 )
Package &1 requires other packages that have not yet been selected ( CACSPACK 102 )
Packages &1 and &2 are mutually exclusive ( CACSPACK 103 )
The selection has more than one core package ( CACSPACK 105 )
The selection does not contain a core package ( CACSPACK 107 )
Cannot create transport request ( CACSPACK 109 )
Chosen end date &1 is outside permitted period ( CACSPH 006 )
Maximum number of periods reached for period rule &1 (&2) ( CACSPH 008 )
Period &1 (&2) and period &3 (&4) overlap ( CACSPH 010 )
It is not possible to change periodicity of period rule &1 ( CACSPH 027 )
Period rule was either not found or it has been deleted ( CACSPH 028 )
No follow-on period exists for period &1 (&2), period rule &3 (&4) ( CACSPH 031 )
Error while calculating follow-on prd for prd &1 (&2), prd rule &3 (&4) ( CACSPH 032 )
Cannot generate: Existing periods are inconsistent ( CACSPH 034 )
Calculation only possible up to and incl. &1, period &2, period rule &3 ( CACSPH 050 )
Document header cannot be registered for posting ( CACSPOST 005 )
Line item(s) cannot be registered for posting ( CACSPOST 006 )
Cannot generate process object (process type &1, process method &2) ( CACSPRC 000 )
No class found for process type &1 and process method &2 ( CACSPRC 001 )
Application &1, process type &2: No number range interval was defined ( CACSPRC 016 )
Effective time-spot; &1, technical time-spot: &2 ( CACSPRC 022 )
Database conversion of application &1 has not yet run ( CACSPRC 060 )
Database conversion of application &1 has already run ( CACSPRC 061 )
Field &1 does not exist in structure &2 ( CACSPSCASE 001 )
Alternative participation of a partnership has no participants ( CACSPSCASE 008 )
Unknown direct participant &1 in different partnership ( CACSPSCASE 010 )
At least one member must be identified as the responsible party ( CACSPSCASE 016 )
Partnership &1(contract &2) does not use any activity participation ( CACSPSCASE 020 )
Difference commission for participant &3/&4 is not permitted ( CACSPSCASE 022 )
Result value distribution for participant &3/&4 not permitted ( CACSPSCASE 023 )
OTC42(GET_SPLIT_ID):No.of split IDs not equal to no.of criteria combinats ( CACSPSCASE 026 )
OTC42(GET_SPLIT_ID): Table IT_SELCRIT must not be changed ( CACSPSCASE 027 )
Distrib.ratio for contract &1 although contract is not in partnership &2 ( CACSPSCASE 028 )
No distribution ratios for partnership &2 and split ID &1 ( CACSPSCASE 029 )
No distribution ratio for contract &1 in partnership &2 (split ID &3) ( CACSPSCASE 030 )
Distribution ratios of type &1 are not supported ( CACSPSCASE 031 )
Call of function module &1 was terminated with exception &2 ( CACSPSCASE 033 )
Invalid database operation &1 on table &2 ( CACSPSCASE 039 )
Inconsistency in partnership &2: distribution ratio for non-member ( CACSPSCASE 045 )
Function module &3 finds no records for partnership &2 and split ID &1 ( CACSPSCASE 050 )
Inconsistency in partnership &2: no distribution ratio for contract &1 ( CACSPSCASE 051 )
Inconsistency in partnership &2: unknown distribution category &1 ( CACSPSCASE 052 )
Inconsistency in Customizing: unknown determination category &1 ( CACSPSCASE 054 )
An error has occurred while posting distribution ratio lines in document ( CACSPSCASE 055 )
Participant &1/&2 (contract &3) must reference a direct participant ( CACSPSCASE 056 )
Dedicated partnership contract &3 only within framework of partnerships ( CACSPSCASE 057 )
Base value distribution is not permitted for participant &3/&4 ( CACSPSCASE 058 )
Group contract may only be specified in context of partnerships ( CACSPSCASE 059 )
Specifying group contracts for dedicated contracts is critical ( CACSPSCASE 061 )
Group contract filled although entitlement cat.6 (group) is not permitted ( CACSPSCASE 062 )
Dedicated contracts although entitlement cat.6 (group) is not permitted ( CACSPSCASE 063 )
Participant &1 (contract &2) has no partnership ( CACSPSCASE 064 )
Indicator for dedicated partnership contracts for appl. &1 not specified ( CACSPSCONFIG 001 )
Interval from &1 to &2 is not completely covered in table &3 ( CACSPSCONFIG 105 )
Table &1 has no relevant key fields ( CACSPSCONFIG 106 )
Field &1 is missing in transfer structure of selection criteria ( CACSPSCONFIG 109 )
Indicator is already set ( CACSPSCONFIG 118 )
Indicator is already set, no complete view ( CACSPSCONFIG 119 )
Number range interval &1 does not exist for number range &2 ( CACSPSCONFIG 122 )
Number range &1 of number range object &2 is not internal ( CACSPSCONFIG 123 )
Field with description in line &1 is too short ( CACSPSCONFIG 124 )
Structure for characteristic combinations is inconsistent ( CACSPSCONFIG 126 )
Commission contract &1 &2 is a member of several partnerships ( CACSPSMD 001 )
No valid settings found for partnership type &1 ( CACSPSMD 005 )
Commission contract is already group contract of partnership &1 ( CACSPSMD 017 )
No default separation rule is defined for bundle type & ( CACSPSMD 022 )
You must specify a separation rule if you enter an end date ( CACSPSMD 023 )
No interpretation was found for distribution ratio &1 ( CACSPSMD 028 )
Table &1 for contract bundle type &2 cannot be accessed ( CACSPSMD 029 )
Incomplete title for the description of distribution ratios ( CACSPSMD 030 )
No selection table found for bundle type &1 ( CACSPSMD 031 )
You have changed the members; now specify new distribution ratios ( CACSPSMD 036 )
Commission contract &1 &2 has contract type 'group contract' ( CACSPSMD 038 )
Selection table &1 for contract bundle type &2 has no entries ( CACSPSMD 047 )
No values (shares) found for distribution ratios ( CACSPSMD 048 )
System error: Run journal cannot be written ( CACSPY 007 )
No counter for database commits found ( CACSPY 008 )
&2: No standard contract found with number &1 ( CACSPY 017 )
&2: No standard contract elements found with number &1 ( CACSPY 018 )
&3: No standard rule found with number &1 in table &2 ( CACSPY 019 )
&2: No entry found in table TCACS_PERIODRULE with &1 ( CACSPY 020 )
Insert into table &1 not possible ( CACSPY 021 )
Change to target system for settlement type ( CACSPY 023 )
Changed disbursement application or service module ( CACSPY 024 )
Update not possible; Return value &1 ( CACSPY 027 )
Contract &1 has no settlement items up to key date ( CACSPY 037 )
Contracts without settlement items ( CACSPY 038 )
Errors have occurred during process; read log ( CACSPY 048 )
Contract lock cannot be lifted ( CACSPY 102 )
Run log &1 cannot be created ( CACSPY 103 )
Offsetting selection is incorrect for standard contract/rule: &1 &2 ( CACSPY 114 )
Remuneration type recall does not appear in standard contract/rule: &1 &2 ( CACSPY 115 )
Remuneration type excess earnings is not in std contract/rule: &1 &2 ( CACSPY 116 )
No update category for process step &1, result type &2 ( CACSPY 117 )
Calculation (retroactive accounting) for period: &1 - &2 ( CACSPY 119 )
Log for commission case &1 could not be written; Cause &2 ( CACSPY 158 )
No number range was found ( CACSPY 204 )
No account assignment information was found for settlement type: &1 ( CACSPY 223 )
No account assignment information was found for remuneration type: &1 ( CACSPY 224 )
Added document &1/ ; amount &2 ( CACSPY 230 )
Remuneration type &1 must not be included ( CACSPY 231 )
Contract &1 / business partner &2 is locked and will not be settled ( CACSPY 232 )
Contract &1 for period &2/&3 will be settled during the period ( CACSPY 236 )

Length: 758066 Date: 20191022 Time: 015038

Count: 3044     sap01-206 ( 2565 ms ) This documentation is copyright by SAP AG.

Our Service

Looking for Support? Questions?

The

Consolut

Callback-Service

Leave us your contact details and we will call you back. Panels marked with * are mandatory.