Messages

Complete Message Docu Documentation From HRBAS00OFFICE002 up to HRPAY99OC029

This documentation is copyright by SAP AG.
Count: 2391 Skipped: 1
Message Docu
Description
The Excel macro version can not be determined ( HRBAS00OFFICE 002 )
System error: unknown error when &1 is called ( HRBAS00OFFICE 003 )
This operating system is not supported ( HRBAS00OFFICE 004 )
The system language may not be properly supported ( HRBAS00OFFICE 005 )
System error: the path indictator &1 is not allowed ( HRBAS00OFFICE 007 )
The file could not be deleted ( HRBAS00OFFICE 012 )
Could not save the file &1 ( HRBAS00OFFICE 014 )
Internal error: &1-->&2 (row &3) ( HRBAS00_PNPCE 001 )
Report category &1 is obsolete ( HRBAS00_PNPCE 002 )
Do not use the GET PERNR event ( HRBAS00_PNPCE 003 )
Personnel planning infotypes cannot be defined using 'AS PERSON TABLE' ( HRBAS00_PNPCE 004 )
Infotype &1 was defined several times ( HRBAS00_PNPCE 005 )
Report class &1 cannot be used for report &2 ( HRBAS00_PNPCE 006 )
Infotype &1 was defined with an invalid MODE ( HRBAS00_PNPCE 007 )
Infotype &1 has an invalid value for KIND ( HRBAS00_PNPCE 008 )
The payroll area &1 is invalid ( HRBAS00_PNPCE 011 )
The payroll area was not entered ( HRBAS00_PNPCE 012 )
Payroll period invalid ( HRBAS00_PNPCE 013 )
The payroll period was not entered ( HRBAS00_PNPCE 014 )
Start date is later than end date ( HRBAS00_PNPCE 015 )
No date was entered for the special run ( HRBAS00_PNPCE 016 )
The dynamic selections entered are not supported ( HRBAS00_PNPCE 021 )
Error while performing selection ID &1 ( HRBAS00_PNPCE 022 )
Function not possible: personnel numbers are already restricted ( HRBAS00_PNPCE 023 )
Specify one object or omit the evaluation path ( HRBAS00_SERVICE 102 )
Dependent objects still exist ( HRBAS00_SERVICE 103 )
Object has an external object type ( HRBAS00_SERVICE 104 )
Object occurs more than once in eval.path; will be archived later ( HRBAS00_SERVICE 105 )
No data found that is to be archived ( HRBAS00_SERVICE 106 )
Infotype 1000 is to be archived; other infotypes are not ( HRBAS00_SERVICE 107 )
Infotype record of planned operation does not have "active" status ( HRBAS00_SERVICE 404 )
Infotype record creation for planned op. with "active" status not allowed ( HRBAS00_SERVICE 406 )
Start/end of infotype record for planned op. same as object start/end ( HRBAS00_SERVICE 407 )
Planned operation for infotype &1 not allowed due to time constraint &2 ( HRBAS00_SERVICE 410 )
Planned operation for infotype 1000 not allowed ( HRBAS00_SERVICE 411 )
Entry of delimitation date for planned deletion not permitted ( HRBAS00_SERVICE 416 )
Use ABAP classes as far as possible ( HRBAS00_SERVICE 501 )
&1 "&2" already locked by user &3 ( HRBAS00_TOOLS 005 )
&1 "&2" already locked by you ( HRBAS00_TOOLS 006 )
&1 "&2" cannot be locked ( HRBAS00_TOOLS 007 )
&1 "&2" cannot be locked ( HRBAS00_TOOLS 008 )
Error during the lot inspection - negative VZ. Lot sending cancelled. ( HRBASCZ_NEMPRI 034 )
Delete EL &1 ( HRBASCZ_ONZ 001 )
Delete EL and SE &1 ( HRBASCZ_ONZ 002 )
Batch for regular corrective report cannot be created ( HRBASCZ_RPCPSAT1 005 )
Batch for additional report cannot be created ( HRBASCZ_RPCPSAT1 006 )
Batch for additional corrective report cannot be created ( HRBASCZ_RPCPSAT1 007 )
Batch for regular report cannot be created ( HRBASCZ_RPCPSAT1 008 )
No structural authorization for &1 and &2 ( HRBAS_ITF 000 )
No basic authorization for &1 &2 &3 &4 ( HRBAS_ITF 001 )
No structural authorization for creating the object ( HRBAS_ITF 002 )
Validity period does not intersect an authorization period ( HRBAS_ITF 003 )
Infotype 1000 cannot be archived ( HRBAS_ITF 008 )
Infotype 1001 is mandatory. Maintain relationship ( HRBAS_ITF 013 )
Changes to display fields are ignored ( HRBAS_ITF 030 )
Changes to unused fields are deleted ( HRBAS_ITF 031 )
Data record to be deleted does not exist before delete ( HRBAS_ITF 100 )
Data record to be changed does not exist before change ( HRBAS_ITF 101 )
You are not allowed to delete the data record ( HRBAS_ITF 102 )
You are not allowed to change the period of the data record ( HRBAS_ITF 103 )
Error in Customizing: Relationship &1 does not have allowed add.condition ( HRBAS_ITF 104 )
Directly assigned positions cannot be determined ( HRBAS_OM_REUSE 101 )
Directly assigned employees cannot be determined ( HRBAS_OM_REUSE 102 )
Cannot determine whether status of positions is Vacancy Open ( HRBAS_OM_REUSE 103 )
Cannot determine whether status of positions is Obsolete ( HRBAS_OM_REUSE 104 )
Authorization does not exist for all assignments in benefit area & ( HRBEN00CEWB 002 )
Not all assignments in benefit area & were selected ( HRBEN00CEWB 003 )
Action not possible; person is locked ( HRBEN00CEWB 004 )
Payroll areas & and & of assignments & and & are not identical ( HRBEN00CEWB 005 )
More than one main personnel assignment exists in benefit area & ( HRBEN00CEWB 006 )
Assignments that are not displayed exist in benefit area & ( HRBEN00CEWB 007 )
Payroll area & differs from payroll area & of assignment & ( HRBEN00CEWB 008 )
This action is only valid until & ( HRBEN00CEWB 009 )
Concurrent Employment has not been activated for the Benefits component ( HRBEN00CEWB 016 )
Personnel number & could not be locked again after exiting application ( HRBEN00CEWB 017 )
You cannot set the "Copy Infotype" flag for infotype & ( HRBEN00CEWB 018 )
This operation is not permitted for personnel number & ( HRBEN00CEWB 019 )
Employee's organizational assignment infotype not available for feature ( HRBEN00FEATURES 001 )
Employee's personnel area/personnel subarea not available for feature ( HRBEN00FEATURES 002 )
Employee's exempt indicator/job category (CAN) not available for feature ( HRBEN00FEATURES 003 )
Employee's exempt indicator/job category (USA) not available for feature ( HRBEN00FEATURES 004 )
Employee's personal data infotype not available for feature ( HRBEN00FEATURES 005 )
Employee's addresses infotype not available for feature ( HRBEN00FEATURES 006 )
Employee's planned working time infotype not available for feature ( HRBEN00FEATURES 007 )
Employee's residence status infotype not available for feature ( HRBEN00FEATURES 008 )
Employee's memberships infotype not available for feature ( HRBEN00FEATURES 009 )
Employee's "General Benefits Info" infotype not available for feature ( HRBEN00FEATURES 010 )
Employee's benefit area could not be obtained from feature ( HRBEN00FEATURES 011 )
Employee's first program grouping could not be obtained from feature ( HRBEN00FEATURES 012 )
Employee's eligibility grouping could not be obtained from feature ( HRBEN00FEATURES 013 )
Employee's second program grouping could not be obtained from feature ( HRBEN00FEATURES 014 )
Employee's cost grouping could not be obtained from feature ( HRBEN00FEATURES 015 )
Employee's credit grouping could not be obtained from feature ( HRBEN00FEATURES 016 )
Employee's disibility indicator not available for feature ( HRBEN00FEATURES 017 )
Employee's termination grouping could not be obtained from feature ( HRBEN00FEATURES 018 )
Variable key could not be obtained from the feature ( HRBEN00FEATURES 019 )
Family member grouping could not be obtained from the feature ( HRBEN00FEATURES 020 )
Data on employee's family/related person not available for feature ( HRBEN00FEATURES 021 )
Employee's basic pay not available for feature ( HRBEN00FEATURES 022 )
Highly compensated indicator not available for feature ( HRBEN00FEATURES 023 )
Adjustment grouping could not be obtained from feature ( HRBEN00FEATURES 024 )
Coverage grouping could not be obtained from feature ( HRBEN00FEATURES 025 )
Employee contribution grouping could not be obtained from feature ( HRBEN00FEATURES 026 )
Employer contribution grouping could not be obtained from feature ( HRBEN00FEATURES 027 )
Last weekday could not be obtained from feature ( HRBEN00FEATURES 028 )
Employee's personnel action not available for feature ( HRBEN00FEATURES 029 )
Pre-tax indicator for plan & has incorrect value ( HRBEN00FMODULES 001 )
Multiple plans were chosen for plan type & ( HRBEN00FMODULES 002 )
Inconsistent benefit areas for plan & and adjustment reason & ( HRBEN00FMODULES 003 )
Inconsistent benefit areas for plan & and general benefits information ( HRBEN00FMODULES 004 )
Employee & is not eligible for plan & on & ( HRBEN00FMODULES 005 )
Employee & is not enrolled in all prerequisite plans for & ( HRBEN00FMODULES 006 )
Employee & is not enrolled in all corequisite plans for & ( HRBEN00FMODULES 007 )
Inconsistent permissions for adjustment reason & in benefit area & ( HRBEN00FMODULES 008 )
Number of additional units for plan & must lie between & and & ( HRBEN00FMODULES 009 )
Pre-tax contribution for plan & cannot be expressed as a percentage ( HRBEN00FMODULES 011 )
Pre-tax contribution for plan & cannot be expressed as an amount ( HRBEN00FMODULES 012 )
Post-tax contribution for plan & cannot be expressed as a percentage ( HRBEN00FMODULES 013 )
Post-tax contribution for plan & cannot be expressed as an amount ( HRBEN00FMODULES 014 )
Post-tax indicator must be selected for plan & ( HRBEN00FMODULES 015 )
Percentage pre-tax contribution for plan & must lie between & and & % ( HRBEN00FMODULES 016 )
Pre-tax contribution amount for plan & must lie between & and & & ( HRBEN00FMODULES 017 )
Percentage post-tax contribution for plan & must lie between & and & % ( HRBEN00FMODULES 018 )
Post-tax contribution amount for plan & must lie between & and & & ( HRBEN00FMODULES 019 )
Contribution for plan & must lie between & and & & ( HRBEN00FMODULES 020 )
Contributions are not allowed for plan & ( HRBEN00FMODULES 021 )
Credits are not allowed for plan & ( HRBEN00FMODULES 022 )
You cannot use an insurance coverage for plan & ( HRBEN00FMODULES 023 )
You cannot set the pre-tax indicator for plan & ( HRBEN00FMODULES 024 )
Plan & does not have insurance characteristics ( HRBEN00FMODULES 025 )
Employee contributions are not allowed for plan & ( HRBEN00FMODULES 026 )
Condition for combined coverage limit & for plan & not fulfilled ( HRBEN00FMODULES 027 )
Condition for combined contribution limit & for plan & not fulfilled ( HRBEN00FMODULES 028 )
For plan & in benefit area & dependent coverage is not allowed ( HRBEN00FMODULES 029 )
For plan & in benefit area & beneficiaries are not allowed ( HRBEN00FMODULES 030 )
For plan & in benefit area & contingent beneficiaries are not allowed ( HRBEN00FMODULES 031 )
For plan & in benefit area & investments are not allowed ( HRBEN00FMODULES 032 )
For plan & a maximum of & beneficiaries are allowed ( HRBEN00FMODULES 033 )
For plan & a maximum of & contingent beneficiaries are allowed ( HRBEN00FMODULES 034 )
For plan & a maximum of & investments are allowed ( HRBEN00FMODULES 035 )
For dependent coverage & (plan &) a maximum of & dependents are allowed ( HRBEN00FMODULES 036 )
Dependent & not allowed for plan & ( HRBEN00FMODULES 037 )
Beneficiary &/& not allowed for plan & ( HRBEN00FMODULES 038 )
Contingent beneficiary &/& not allowed for plan & ( HRBEN00FMODULES 039 )
Employee cannot be a beneficiary for plan & ( HRBEN00FMODULES 040 )
Enter period for credit override for plan & ( HRBEN00FMODULES 041 )
Adjustment authorizations for plan & are inconsistent ( HRBEN00FMODULES 042 )
Additional units are not allowed for plan & ( HRBEN00FMODULES 043 )
Beneficiary &/& cannot be a contigent beneficiary at the same time ( HRBEN00FMODULES 044 )
Pre-tax contribution units are not allowed for plan & ( HRBEN00FMODULES 046 )
Post-tax contribution units are not allowed for plan & ( HRBEN00FMODULES 047 )
Number of pre-tax contribution units for plan & must lie between & and & ( HRBEN00FMODULES 048 )
Number of post-tax contribution units for plan & must lie between & and & ( HRBEN00FMODULES 049 )
Enter currency for credit override for plan & ( HRBEN00FMODULES 050 )
Enter period for cost override for plan & ( HRBEN00FMODULES 051 )
Enter currency for cost override for plan & ( HRBEN00FMODULES 052 )
Percentage bonus pre-tax contribution for & must lie between & and & % ( HRBEN00FMODULES 053 )
Bonus pre-tax contribution amount for & must lie between & and & & ( HRBEN00FMODULES 054 )
No. of bonus pre-tax contrib. units for plan & must lie between & and & ( HRBEN00FMODULES 055 )
Percentage bonus post-tax contribution for & must lie between & and & % ( HRBEN00FMODULES 056 )
Bonus post-tax contribution amount for & must lie between & and & & ( HRBEN00FMODULES 057 )
No. of bonus post-tax contrib. units for plan & must lie between & and & ( HRBEN00FMODULES 058 )
Bonus pre-tax contribution for plan & cannot be expressed as a percentage ( HRBEN00FMODULES 059 )
Bonus pre-tax contribution for plan & cannot be expressed as an amount ( HRBEN00FMODULES 060 )
Bonus pre-tax contribution units are not allowed for plan & ( HRBEN00FMODULES 061 )
Bonus post-tax contribution for plan & cannot be expressed as percentage ( HRBEN00FMODULES 062 )
Bonus post-tax contribution for plan & cannot be expressed as an amount ( HRBEN00FMODULES 063 )
Bonus post-tax contribution units are not allowed for plan & ( HRBEN00FMODULES 064 )
Post-tax indicator for bonus must be selected for plan & ( HRBEN00FMODULES 065 )
Enter period for monetary pre-tax contribution for plan & ( HRBEN00FMODULES 066 )
Enter period for pre-tax contribution units for plan & ( HRBEN00FMODULES 067 )
Enter period for monetary post-tax contribution for plan & ( HRBEN00FMODULES 068 )
Enter period for post-tax contribution units for plan & ( HRBEN00FMODULES 069 )
Enter currency for monetary pre-tax contribution for plan & ( HRBEN00FMODULES 070 )
Enter currency for monetary post-tax contribution for plan & ( HRBEN00FMODULES 071 )
Enter currency for monetary bonus pre-tax contribution for plan & ( HRBEN00FMODULES 072 )
Enter currency for monetary bonus post-tax contribution for plan & ( HRBEN00FMODULES 073 )
Enter currency for employee contribution for flexible spending account & ( HRBEN00FMODULES 074 )
Cont. beneficiaries allowed only if regular beneficiaries exist (plan &) ( HRBEN00FMODULES 075 )
Only enter start/end of fixed period for & if indicator is selected ( HRBEN00FMODULES 076 )
Enter either regular period or fixed period for plan & ( HRBEN00FMODULES 077 )
Start/end of fixed period for & : both filled or both empty ( HRBEN00FMODULES 078 )
Percentage contributions are not allowed for a fixed period (plan &) ( HRBEN00FMODULES 079 )
Enter currency for salary override for plan & ( HRBEN00FMODULES 080 )
Enter currency for coverage override for plan & ( HRBEN00FMODULES 081 )
Start date of & must not be before start date of fixed period ( HRBEN00FMODULES 082 )
Start date of fixed period of & not consistent with previous record ( HRBEN00FMODULES 083 )
New record of & not consistent with fixed period of following record ( HRBEN00FMODULES 084 )
Number of additional units for plan & cannot be increased ( HRBEN00FMODULES 085 )
Number of additional units for plan & cannot be decreased ( HRBEN00FMODULES 086 )
Pre-tax contribution for plan & cannot be increased ( HRBEN00FMODULES 087 )
Pre-tax contribution for plan & cannot be decreased ( HRBEN00FMODULES 088 )
Post-tax contribution for plan & cannot be increased ( HRBEN00FMODULES 089 )
Post-tax contribution for plan & cannot be decreased ( HRBEN00FMODULES 090 )
Bonus pre-tax contribution for plan & cannot be increased ( HRBEN00FMODULES 091 )
Bonus pre-tax contribution for plan & cannot be decreased ( HRBEN00FMODULES 092 )
Bonus post-tax contribution for plan & cannot be increased ( HRBEN00FMODULES 093 )
Bonus post-tax contribution for plan & cannot be decreased ( HRBEN00FMODULES 094 )
Contribution for plan & cannot be increased ( HRBEN00FMODULES 095 )
Contribution for plan & cannot be decreased ( HRBEN00FMODULES 096 )
Start and/or end of fixed period for & not specified ( HRBEN00FMODULES 097 )
Error calculating length of service ( HRBEN00FMODULES 100 )
For plan & you require at least & additional units ( HRBEN00FMODULES 101 )
Percentage pre-tax contribution for plan & must be at least & percent ( HRBEN00FMODULES 102 )
Pre-tax contribution amount for plan & must be at least & & ( HRBEN00FMODULES 103 )
At least &2 pre-tax contributions must selected for plan &1 ( HRBEN00FMODULES 104 )
Percentage post-tax contributions for plan & must be at least & percent ( HRBEN00FMODULES 105 )
Post-tax contribution amount for plan & must be at least & & ( HRBEN00FMODULES 106 )
At least &2 post-tax contribution units must be selected for plan &1 ( HRBEN00FMODULES 107 )
Percentage pre-tax bonus contribution for & must be at least & percent ( HRBEN00FMODULES 108 )
Pre-tax bonus contribution amount for plan & must be at least & & ( HRBEN00FMODULES 109 )
At least &2 bonus pre-tax contribution units must be selected for plan &1 ( HRBEN00FMODULES 110 )
Percentage post-tax bonus contribution for plan & must be at least & % ( HRBEN00FMODULES 111 )
Post-tax bonus contribution amount for plan & must be at least & & ( HRBEN00FMODULES 112 )
At least &2 bonus post-tax contribution units must be selected for &1 ( HRBEN00FMODULES 113 )
Contribution for plan & must be at least & & ( HRBEN00FMODULES 114 )
End of time is not permissible as the end of a fixed period for plan & ( HRBEN00FMODULES 115 )
No plans offered on & ( HRBEN00FMODULES 118 )
No existing benefits between &1 and &2 ( HRBEN00FMODULES 119 )
& is a corequisite plan and cannot be deleted ( HRBEN00FMODULES 122 )
Details cannot be determined for related person &/& ( HRBEN00FMODULES 124 )
Details cannot be determined for external organization &/& ( HRBEN00FMODULES 125 )
Details cannot be determined for employee & ( HRBEN00FMODULES 126 )
Employee's address could not be determined ( HRBEN00FMODULES 127 )
Pre-tax rollover not possible for plan & ( HRBEN00FMODULES 128 )
Bonus pre-tax rollover not possible for plan & ( HRBEN00FMODULES 129 )
Enter currency for plan &, since investment amount is existing ( HRBEN00FMODULES 130 )
Enter period for plan &, since investment amount is existing ( HRBEN00FMODULES 131 )
Enter currency for investment amount for & (plan &) ( HRBEN00FMODULES 132 )
Currencies for plan & and assigned investment must match ( HRBEN00FMODULES 133 )
Currency conversion on the & lies between the start and end date ( HRBEN00FMODULES 134 )
Error occurred during conversion of amount & from period & to & ( HRBEN00FMODULES 135 )
Error occurred during currency conversion from & to & ( HRBEN00FMODULES 136 )
Error determining the decimal place factor of currency & ( HRBEN00FMODULES 142 )
Address of family member/related person could not be determined ( HRBEN00FMODULES 145 )
Spouse approval missing for beneficiary selection for plan & ( HRBEN00FMODULES 146 )
Employee's zip code lies outside the permitted group ( HRBEN00FMODULES 147 )
Employee not eligible because too young ( HRBEN00FMODULES 148 )
Employee is eligible as of the & (after the evaluation date) ( HRBEN00FMODULES 149 )
Employee not eligible as he/she works less than minimum working hours ( HRBEN00FMODULES 151 )
Birth date could not be determined ( HRBEN00FMODULES 152 )
Employee not eligible because to old ( HRBEN00FMODULES 153 )
No payroll period found for the period parameter & ( HRBEN00FMODULES 154 )
Costs for the total coverage could not be calculated ( HRBEN00FMODULES 156 )
Gender could not be determined ( HRBEN00FMODULES 157 )
Spouse's birth date could not be determined ( HRBEN00FMODULES 159 )
Total contributions already paid (& &) greater than selected contribution ( HRBEN00FMODULES 172 )
Total refunded contributions (& &) greater than selected contribution ( HRBEN00FMODULES 173 )
A claim still exists for the plan & which is to be deleted ( HRBEN00FMODULES 174 )
Processing data inconsistent for benefit areas & and & ( HRBEN00FMODULES 178 )
No plans found for benefit area & between & and & ( HRBEN00FMODULES 180 )
PDC retroactive accounting date for employee could not be determined ( HRBEN00FMODULES 181 )
Employee hire date could not be determined ( HRBEN00FMODULES 182 )
Error occured when calculating salary ( HRBEN00FMODULES 186 )
Infotype 0171 could not be read for person &1 on &2 ( HRBEN00FMODULES 187 )
Time evaluation results incomplete between & - & ( HRBEN00FMODULES 194 )
Error collecting time evaluation results for & - & ( HRBEN00FMODULES 195 )
Inconsistent values for pre-tax indicator for plan & ( HRBEN00FMODULES 197 )
Required number of actual working hours for eligibility not reached ( HRBEN00FMODULES 202 )
Employee's address (type &) does not exist ( HRBEN00FMODULES 203 )
You cannot print a form for this type of offer ( HRBEN00FMODULES 205 )
Employee is not enrolled in a benefit plan of type & ( HRBEN00FMODULES 210 )
Claim submission date is after the end of the submission period on & ( HRBEN00FMODULES 211 )
Reimbursement of claims in this plan year is only possible until & & ( HRBEN00FMODULES 212 )
The claim can only be fully reimbursed at a later date ( HRBEN00FMODULES 213 )
The status 'Not yet approved' is not permitted for this claim ( HRBEN00FMODULES 214 )
This claim can no longer be deleted ( HRBEN00FMODULES 215 )
Plan type and date cost incurred can no longer be changed ( HRBEN00FMODULES 216 )
Dependent &/& not found in infotype 0021 on & ( HRBEN00FMODULES 219 )
At least &3 dependents are required for dependent coverage &1 (plan &2) ( HRBEN00FMODULES 224 )
At least &2 person(s) of type &3 are required for dependent coverage &1 ( HRBEN00FMODULES 225 )
A max. of &2 person(s) of type &3 is permitted for dependent coverage &1 ( HRBEN00FMODULES 226 )
A min. of &2 non-taxable persons of type &3 required for dep. coverage &1 ( HRBEN00FMODULES 227 )
A max. of &2 non-taxable persons of type &3 permitted for dep.coverage &1 ( HRBEN00FMODULES 228 )
For dependent coverage & no persons of the type & are allowed ( HRBEN00FMODULES 229 )
A min. of & taxable persons of type & is required for dep. coverage & ( HRBEN00FMODULES 231 )
A max. of & taxable persons of type & is permitted for dep. coverage & ( HRBEN00FMODULES 232 )
Personnel number & is main personnel assignment for benefits on & ( HRBEN00FMODULES 233 )
No main personnel assignment for benefits found on & ( HRBEN00FMODULES 234 )
Personnel assignment is not assigned a benefit area on & ( HRBEN00FMODULES 235 )
Exception error during method call to determine Concurrent Employment ( HRBEN00FMODULES 236 )
Document could not be found ( HRBEN00FORMS 015 )
You cannot print Office forms in the background ( HRBEN00FORMS 018 )
No validity date entered for length of service or retirement benefit ( HRBEN00IDOC 006 )
Unknown segment (&1) at position &2 ( HRBEN00IDOC 010 )
Plan at position &1 is not allocated to the current provider ( HRBEN00IDOC 011 )
IDoc contains >1 E1BENRET08 segment per plan(&1)/type of service(&2) ( HRBEN00IDOC 012 )
IDoc contains more than one E1BENRET09 segment per plan(&1) ( HRBEN00IDOC 013 )
Conversion error in segment E1BENRET08 for plan & ( HRBEN00IDOC 014 )
E1BENRET08 segment for plan &1 contains invalid service type (&2) ( HRBEN00IDOC 015 )
The last results could not be determined for plan &. ( HRBEN00IDOC 016 )
Benefit vesting percentage could not be determined for plan &. ( HRBEN00IDOC 017 )
Error writing results for plan &. ( HRBEN00IDOC 018 )
Provider does not support the transfer of savings plan data ( HRBEN00IDOC 020 )
No cumulations found for retirement plans between &1 and &2 ( HRBEN00IDOC 021 )
Length of service for plan & ignored as not part of TPA service ( HRBEN00IDOC 022 )
& persons were excluded from processing. ( HRBEN00IDOC 023 )
&1 of &2 persons selected have been processed successfully ( HRBEN00IDOC 026 )
No length of service data found for plan & ( HRBEN00IDOC 027 )
'&' cannot be interpreted as a number ( HRBEN00IDOC 028 )
The service segments for plan & do not have the same evaluation date ( HRBEN00IDOC 029 )
No data found for service type '&1' for plan &2. ( HRBEN00IDOC 030 )
Evaluation date & not written in correct format (YYYYMMDD) ( HRBEN00IDOC 031 )
Provider does not support transfer of insurance plan data ( HRBEN00IDOC 032 )
Provider does not support transfer of stock purchase plan data ( HRBEN00IDOC 033 )
Provider does not support transfer of flexible spending account data ( HRBEN00IDOC 034 )
Provider does not support transfer of miscellaneous plan data ( HRBEN00IDOC 035 )
You do not have authorization to read infotype &1 ( HRBEN00IDOC 036 )
Previous benefit area will be replaced by current benefit area ( HRBEN00INFOTYPES 001 )
For start date &, the new currency & is valid ( HRBEN00INFOTYPES 002 )
You cannot choose dependents for this plan ( HRBEN00INFOTYPES 004 )
You cannot choose beneficiaries for this plan ( HRBEN00INFOTYPES 005 )
You cannot choose investments for this plan ( HRBEN00INFOTYPES 006 )
Other data is relevant for plan & on &. Check entries ( HRBEN00INFOTYPES 010 )
Records of this infotype cannot be delimited ( HRBEN00INFOTYPES 012 )
Manual deleting, copying, and delimiting of this record not permitted ( HRBEN00INFOTYPES 023 )
Benefit area not the same as employee benefit area ( HRBEN00INFOTYPES 024 )
Before the record is deleted, the record for child & must be deleted ( HRBEN00INFOTYPES 025 )
Record for domestic partner must exist for entire validity period ( HRBEN00INFOTYPES 026 )
Record for spouse overlaps with record for domestic partner ( HRBEN00INFOTYPES 027 )
Benefit area & already used for personnel assignment & ( HRBEN00INFOTYPES 032 )
The system calculated elgibility date is &The end date informed is differ ( HRBEN00ITDECO 001 )
Deduction model &1 could not be assigned (RP_CHECK_PAY_PERIODS) ( HRBEN00PAYROLL 001 )
Period parameter &1 of deduction model &2 does not correspond with &3 ( HRBEN00PAYROLL 003 )
Date modifier &1 of deduction model &2 does not correspond with &3 ( HRBEN00PAYROLL 004 )
Incorrect parameter for determining evalution period ( HRBEN00PAYROLL 005 )
Incorrect V0 type &2 for wage type &1 ( HRBEN00PAYROLL 007 )
No entry in table V0 for combination &1 / &2 ( HRBEN00PAYROLL 008 )
Payroll period not maintained for period parameter &1 on &2 ( HRBEN00PAYROLL 012 )
Payroll driver program & not found ( HRBEN00PAYROLL 013 )
Variant &1 not found for payroll driver &2. ( HRBEN00PAYROLL 014 )
Error occurred during payroll simulation for personnel number & ( HRBEN00PAYROLL 015 )
Variant & not found for printing payroll forms. ( HRBEN00PAYROLL 016 )
Error creating payroll form. ( HRBEN00PAYROLL 017 )
Function module for cumulation of durations is missing in conv. rule &1 ( HRBEN00SERVICE 005 )
Equivalent length of service is not defined for plan &1 ( HRBEN00SERVICE 007 )
Function module '&1' for cumulation of durations does not exist ( HRBEN00SERVICE 009 )
Benefit area & cannot be deleted because it occurs in infotypes ( HRBEN00TOOLREPORTS 015 )
You cannot convert the currency of infotype records for a past date ( HRBEN00TOOLREPORTS 021 )
Dependent infotype records exist. Deletion not possible. ( HRBEN00TOOLREPORTS 025 )
Application "Benefits Administration" (PA-BN), client & ( HRBEN00TOOLREPORTS 702 )
Benefit area &, plan &: Inconsistent entries; only last valid converted ( HRBEN00TOOLREPORTS 703 )
Benefit area &: Plan & not converted since variant already exists ( HRBEN00TOOLREPORTS 704 )
For client & not all entries could be created in table T74HT ( HRBEN00TOOLREPORTS 708 )
&1 not defined ( HRBEN00TOOLREPORTS 801 )
&1 not used in &2 ( HRBEN00TOOLREPORTS 802 )
&1/&2 not defined ( HRBEN00TOOLREPORTS 803 )
&1/&2 not used in &3 ( HRBEN00TOOLREPORTS 804 )
&1 not used in &2 or &3 ( HRBEN00TOOLREPORTS 805 )
&1/&2 not used in &3 ( HRBEN00TOOLREPORTS 806 )
&1/&2 does not occur ( HRBEN00TOOLREPORTS 807 )
&1 not allowed ( HRBEN00TOOLREPORTS 808 )
Wrong value for &1 ( HRBEN00TOOLREPORTS 809 )
No entry in table &1 ( HRBEN00TOOLREPORTS 810 )
No entry for &1 ( HRBEN00TOOLREPORTS 811 )
Field &1 not filled ( HRBEN00TOOLREPORTS 812 )
Criterion &1 not selected ( HRBEN00TOOLREPORTS 813 )
Criterion for &1 never selected ( HRBEN00TOOLREPORTS 814 )
Validity times of &1 differ ( HRBEN00TOOLREPORTS 815 )
Validity times of &1 inconsistent ( HRBEN00TOOLREPORTS 816 )
Validity times of &1 and &2 different ( HRBEN00TOOLREPORTS 817 )
Validity times of &1 and &2 inconsistent ( HRBEN00TOOLREPORTS 818 )
Validity times of &1 differ ( HRBEN00TOOLREPORTS 819 )
Validity times of &1 inconsistent ( HRBEN00TOOLREPORTS 820 )
Validity times in &1 inconsisitent ( HRBEN00TOOLREPORTS 821 )
&1 cannot be selected ( HRBEN00TOOLREPORTS 822 )
&1/&2 not used ( HRBEN00TOOLREPORTS 823 )
&1 not used ( HRBEN00TOOLREPORTS 824 )
&1 is not generally available and is not otherwise used. ( HRBEN00TOOLREPORTS 825 )
Plan for dynamic eligibility is also used for other plan. ( HRBEN00TOOLREPORTS 826 )
Indicator &1 is irrelevant for plans other than savings plans ( HRBEN00TOOLREPORTS 827 )
Maximum number of date specifications already exist from & - & ( HRBEN00TREEREPORTS 010 )
You cannot create infotype & from & - & ( HRBEN00TREEREPORTS 012 )
You cannot delete infotype & from & - & ( HRBEN00TREEREPORTS 014 )
Infotype 0001 could not be read for person &1 on &2 ( HRBEN00TREEREPORTS 031 )
No authorization for personnel assignment & of person ID & ( HRBEN00TREEREPORTS 032 )
Off-cycle reason does not have the category 'Bonus' ( HRBEN00VIEWS 003 )
An address type with time constraint 3 is not allowed ( HRBEN00VIEWS 007 )
End date cannot be later than end date & from the general data view ( HRBEN00VIEWS 078 )
You cannot assign an investment group to this plan ( HRBEN00VIEWS 079 )
You cannot specify two plans of the same plan type ( HRBEN00VIEWS 128 )
COBRA letter and enrollment form: both Office or both SAPScript ( HRBEN00VIEWS 131 )
Investment wage type must be filled because there are several providers. ( HRBEN00VIEWS 132 )
Compensation wage type & already used for plan & ( HRBEN00VIEWS 136 )
Relevant COBRA events cannot be set for this subtype ( HRBEN00VIEWS 154 )
Not all events selected are allowed for this subtype ( HRBEN00VIEWS 155 )
One of the maximum number fields must be filled ( HRBEN00VIEWS 157 )
Birth date for & & & could not be determined ( HRBENUSCOBRA 009 )
& of &: Processing unnecessary due to preceeding event ( HRBENUSCOBRA 010 )
& of &: Error calculating dates for the COBRA letter ( HRBENUSCOBRA 013 )
Event & on &: Preceeding event & on & has not been processed yet ( HRBENUSCOBRA 015 )
Please process '&' on & for this personnel number first ( HRBENUSCOBRA 016 )
On & there are no possible entries ( HRBENUSCOBRA 025 )
No consistent dependent coverage exists for plan & / option & ( HRBENUSCOBRA 036 )
Several consistent dependent coverages exist for plan & / option & ( HRBENUSCOBRA 037 )
Enrollment not allowed in plan & due to carryover to HSA-compatible FSA ( HRBENUSPAYROLL 017 )
Error while generating letters for '&' on & ( HRBENUSUSEREXITS 003 )
Enter data in Part IV for ALETM &1. ( HRBENUS_ACA 026 )
The Aggregated Group Indicator is missing for ALETM &1 ( HRBENUS_ACA 027 )
Employee &1 locked but XML submission status is not final ('&2'). ( HRBENUS_ACA 030 )
Original Record not found for Employee &1 while processing correction ( HRBENUS_ACA 032 )
Employee &1 has changes although submission status is rejected. ( HRBENUS_ACA 033 )
The employees you entered are not reported in the ReceiptID. ( HRBENUS_ACA 034 )
Qualifying Offer Method Transition Relief is valid only for year 2015 ( HRBENUS_ACA 046 )
Correction needed for RunID &1 to update 1094-C data for Auth. Trasm. ( HRBENUS_ACA 051 )
Employees of Replacement not consistent with the Original ( HRBENUS_ACA 052 )
Section 4980H Transition Relief is valid until 2016 ( HRBENUS_ACA 054 )
Last known address for employee &1 has an end date in the past. ( HRBENUS_ACA 115 )
Plan Start Month of Health Plan &1 is not configured. ( HRBENUS_ACA 151 )
Employee &1: Plan Start Month not configured. ( HRBENUS_ACA 152 )
Not possible to process RunID &1. Submission status is not final. ( HRBENUS_ACA 213 )
No Authoritative Transmittal RunID found with a valid status. ( HRBENUS_ACA 215 )
No valid reporting ALE found for the informed ReceiptID. ( HRBENUS_ACA 216 )
Update all Reporting ALEs ( HRBENUS_ACA 413 )
Status Partially Accepted invalid. ( HRBENUS_ACA 414 )
Enter one ReceiptID and one Submission ID. ( HRBENUS_ACA 459 )
Submission ID not allowed for multiple Receipt IDs. ( HRBENUS_ACA 460 )
Issuer data reported; please create another correction for employee data. ( HRBENUS_ACA 513 )
Maintain the field Max. points or Max. percentage ( HRBPS00POINT 006 )
Parameter grp needed if you select salary, age, seniority or point grp ( HRBPS00POINT 009 )
There is no working day before the start date of absence ( HRCALARREPORTING 006 )
ID of undefined agreement type ( HRCALARREPORTING 011 )
No legal contract type for Argentina defined for contract type &1. ( HRCALARREPORTING 013 )
Undefined payment date for &3/&4 ( HRCALARREPORTING 020 )
Payment date of absence &1 has been modified ( HRCALARREPORTING 021 )
Impossible to calculate off-cycle payroll run for absence of &1 ( HRCALARREPORTING 022 )
Reference date for tax calculation not defined ( HRCALARREPORTING 024 )
Employee incorporated &1, after end of the fiscal period ( HRCALARREPORTING 027 )
Employee left &1 ; their final settlement was &2 ( HRCALARREPORTING 028 )
Creation date for wage type &1 after leaving date &2 ( HRCALARREPORTING 029 )
There already exists a batch input generated for this year's results ( HRCALARREPORTING 031 )
The function ( Form &1 / Program &2 ) could not be executed ( HRCALARREPORTING 032 )
The tax calculation function has not saved the wage type &1 ( HRCALARREPORTING 033 )
There is no contribution reduction percentage for area &1 in &2 ( HRCALARREPORTING 042 )
There is no reduction area for Area &1 and Subarea &2 ( HRCALARREPORTING 043 )
Employee already run, not possible to execute process in test form ( HRCALARREPORTING 057 )
There was an error in the leave execution ( HRCALARREPORTING 071 )
The employee must leave company but does not have a valid ANSeS reason ( HRCALARREPORTING 081 )
The date of payment entered corresponds to a non-working day ( HRCALARREPORTING 087 )
An error occurred in the final settlement ( HRCALARREPORTING 091 )
Impossible to calculate off-cycle run for leaving with date &1 ( HRCALARREPORTING 092 )
You cannot open the temSe file ( HRCALARREPORTING 095 )
The employee is on leave but does not have a valid reason for SIJP ( HRCALARREPORTING 101 )
Report HARLIBR1 is no longer used. Use report HARLIBR0. ( HRCALARREPORTING 116 )
Program: My simplification can not be run before 01/01/2007 ( HRCALARREPORTING 117 )
Infotype 0021 does not exist for infotype 0875 ( HRCALARREPORTING 119 )
No working day found before the start date of absence ( HRCALCOREPORT 006 )
Identification for undefined pay scale category ( HRCALCOREPORT 011 )
No legal contract type for Argentina defined for contract type &1 ( HRCALCOREPORT 013 )
Payment date for &3/&4 not defined ( HRCALCOREPORT 020 )
Special future settlement not allowed for absence &1, only current per. ( HRCALCOREPORT 021 )
Special settlement update not allowed for absence &1, only simulation ( HRCALCOREPORT 022 )
Reference date for tax calculation has not been defined ( HRCALCOREPORT 024 )
Employee entered on the &1, after the end of the fiscal period ( HRCALCOREPORT 027 )
Employee left &1 ;his/her final settlement was &2 ( HRCALCOREPORT 028 )
Creation date for wage type &1 after a leaving date &2 ( HRCALCOREPORT 029 )
There already exists a batch input generated for this year's results ( HRCALCOREPORT 031 )
The function ( Form &1 / Program &2 ) could not be executed ( HRCALCOREPORT 032 )
The tax calculation function has not saved the wage type &1 ( HRCALCOREPORT 033 )
There is no contribution reduction percentage for area &1 in &2 ( HRCALCOREPORT 042 )
There is no reduction area for area &1 and subarea &2 ( HRCALCOREPORT 043 )
Employee already settled, impossible to execute process in test form ( HRCALCOREPORT 057 )
There was an error in leave deduction ( HRCALCOREPORT 071 )
The employee must leave company but does not have a valid ANSeS reason ( HRCALCOREPORT 081 )
The date of payment entered corresponds to a non-working day ( HRCALCOREPORT 087 )
An error occurred in the final settlement ( HRCALCOREPORT 091 )
Impossible to calculate off-cycle run for leaving with date &1 ( HRCALCOREPORT 092 )
TemSe file cannot be opened ( HRCALCOREPORT 095 )
The employee is on leave but does not have a valid reason for SIJP ( HRCALCOREPORT 101 )
Report HARLIBR1 is no longer used. Use report HARLIBR0 ( HRCALCOREPORT 116 )
Please select a Tax Reference Number from T7FI1P. ( HRCALFIREPORTING 200 )
Tax code & is not defined. ( HRCALFIREPORTING 201 )
Unable to find dataset & ( HRCALFIREPORTING 202 )
Cumulation of wage types for ATS started with wrong parameter(s). ( HRCALFIREPORTING 203 )
No organizational assignment could be found. ( HRCALFIREPORTING 204 )
No field assigned in T7FIA1 for tax code & ( HRCALFIREPORTING 206 )
Please maintain calc. rule grouping (ABART) for employee subgroup & ( HRCALFIREPORTING 250 )
Please maintain quota type grouping (T001P) for & & ( HRCALFIREPORTING 252 )
Please maintain quota type grouping (KONTY) for employee subgroup & ( HRCALFIREPORTING 253 )
Please maintain bonus payment period in T7FIV0 for & ( HRCALFIREPORTING 254 )
No valuation basis found: Specify own daily rate from payroll results ( HRCALFIREPORTING 255 )
Please select today's date as key date. ( HRCALFIREPORTING 256 )
No record stored for infotype 2006 Absence Quota ( HRCALFIREPORTING 257 )
Inconsistent use of "Not BIK Relevant" indicator with the same subtype ( HRCARXX 008 )
This SAP grouping reason must not be overwritten ( HRCCE00GROUPINGS 002 )
No grouping rule for &1 found ( HRCCE00GROUPINGS 024 )
Prerequisite for using the F4 help was ignored ( HRCCE00GROUPINGS 031 )
Calling report &1 ( HRCCE00MSG_S 000 )
Distribution method &1 does not exist ( HRCCE00PAY 010 )
Invalid processing class &1 in distribution basis &2 ( HRCCE00PAY 011 )
Invalid cumulation &1 in distribution basis &2 ( HRCCE00PAY 012 )
No entry in GROUPING table for reason &1 between &2 and &3. ( HRCCE00PAY 030 )
Wage type &1 is not a deduction wage type; check Customizing ( HRCCE00PAY 031 )
There are no main bank details for grouping &1 from &2 to &3 ( HRCCE00PAY 032 )
Group pers assigt &2 for grping reason &1 cannot be changed from &3 to &4 ( HRCCE00PAY 035 )
Bank details for off-cycle of &1 and &2 are different. ( HRCCE00PAY 036 )
Pers.assignment &1 has no grouping value for reason &2 between &3 and &4 ( HRCCE00PAY 037 )
Error when processing grping reason &1 for pers.assig. &2 in period &3-&4 ( HRCCE00PAY 041 )
Invalid Change of Net Grouping for Personnel Assignment &1 ( HRCCE00PAY 050 )
Missing Entry for GrpgReason XXNT for PersAssignment &1 in GROUPING Table ( HRCCE00PAY 051 )
Grouping &1 overlaps with grouping by payroll area ( HRCCE00PAY 053 )
Technical Error Occurred When Determining Grouping &1 ( HRCCE00PAY 054 )
Wage type &1 is not a person wage type ( HRCCE00PAY 060 )
Task processing cancelled due to &1; data is incomplete ( HRCCE_BIW 000 )
Parallel processing: Internal error ( HRCCE_BIW 001 )
Parallel processing: Server group & does not exist ( HRCCE_BIW 004 )
Parallel processing: All available servers are overloaded ( HRCCE_BIW 005 )
PY area also changed for other pers. assignments to be run in PY together ( HRCCE_CHG_PY 000 )
Payroll area &1 is not allowed as other assignment with PY area &1 exists ( HRCCE_CHG_PY 001 )
PY areas transferred from pers. assignments to be run in PY together ( HRCCE_CHG_PY 003 )
Personnel assignment &1: Payroll has already run ( HRCCE_CHG_PY 005 )
No tax company is defined for personnel area &1 / personnel subarea &2 ( HRCCE_CHG_PY 006 )
Missing coding: T77S0 switch CCURE CHGPY cannot be used ( HRCCE_CHG_PY 007 )
PY area is set to &1 (adjustment to pers. assgmt with the same employer) ( HRCCE_CHG_PY 011 )
Employee's compensation area could not be obtained from feature ( HRCMP00FEATURES 001 )
Organizational assignment between & and & not available for feature ( HRCMP00FEATURES 002 )
Personnel area & not available for feature ( HRCMP00FEATURES 003 )
Employee's compensation group could not be obtained from feature ( HRCMP00FEATURES 004 )
Employee's eligibility group could not be obtained from feature ( HRCMP00FEATURES 005 )
Employee's guideline group could not be obtained from feature ( HRCMP00FEATURES 006 )
Guideline could not be applied to &1 on &2 ( HRCMP00LTI 040 )
Unable to delete entry ( HRCMP00LTI 102 )
You cannot save the selected grantings ( HRCMP00LTI 122 )
Market value from price information is no longer taken into account ( HRCMP00LTI 200 )
Market Value is Being Read from the Treasury ( HRCMP00LTI 203 )
Organizational assignment for manager & between & and & not found ( HRCMP00MODULES 001 )
Managing position & is not filled between & and & ( HRCMP00MODULES 002 )
Employee does not have a manager ( HRCMP00MODULES 003 )
Country grouping for personnel area & not found ( HRCMP00MODULES 004 )
Award &1 does not exist ( HRCMP00MODULES 102 )
No pricing information has been specified for award & ( HRCMP00MODULES 107 )
No information for award &1 has been specified for compensation area &2 ( HRCMP00MODULES 109 )
No change maintained for award &2 as a result of life event &1 ( HRCMP00MODULES 122 )
Currency for granting changed from &1 to &2. Check grant price ( HRCMP00MODULES 145 )
Currency for granting changed from &1 to &2. Check market value ( HRCMP00MODULES 146 )
Award could not be determined ( HRCMP00MODULES 157 )
Award &1, granting &2: maximum number of life events reached ( HRCMP00MODULES 159 )
Award &1, granting &2: granting lies in the future ( HRCMP00MODULES 160 )
Award &1, granting &2: conflict with exercises in the future ( HRCMP00MODULES 161 )
Award &1, granting &2 could not be saved ( HRCMP00MODULES 162 )
Exercises or grantings after the cancellation date will be deleted ( HRCMP00MODULES 163 )
Award &1, granting &2: term of award will not be changed ( HRCMP00MODULES 164 )
Can only change status by leaving this screen ( HRCMP00REPORTING 001 )
There are no adjustments with status &1 ( HRCMP00REPORTING 002 )
No currency or time units are maintained for the salary structure ( HRCMP00REPORTING 109 )
The chosen salary structure does not exist ( HRCMP00REPORTING 110 )
The chosen pay scale structure does not exist ( HRCMP00REPORTING 111 )
No period parameter is maintained for the payroll area ( HRCMP00REPORTING 123 )
No reference value available for pay grade &1 for time &2 ( HRCMP00REPORTING 131 )
Error formatting form ( HRCMP00REPORTING 302 )
Employee's address according to feature ADDRS on &1 not found ( HRCMP00REPORTING 312 )
No active categories found for Total Compensation Statement ( HRCMP00REPORTING 314 )
No active subcategories found for category & ( HRCMP00REPORTING 315 )
No wage type found for subcategory &1 (category &2) for &3 ( HRCMP00REPORTING 317 )
Long-term incentive plan &1 already exists ( HRCMP00REPORTING 503 )
Compensation adjustment &1 already exists ( HRCMP00REPORTING 504 )
Employee not permitted on &2 for adjustment type &1 ( HRCMP00REPORTING 601 )
Employee not permitted on &2 for adjustment type &1 ( HRCMP00REPORTING 604 )
Adjustment type &1 not available. Employee not eligible ( HRCMP00REPORTING 605 )
Employee not eligible for award &1 on &2. ( HRCMP00REPORTING 606 )
Employee not eligible for award &1 on &2. ( HRCMP00REPORTING 607 )
Employee not eligible for compensation adjustments ( HRCMP00REPORTING 608 )
Employee not eligible for compensation adjustments ( HRCMP00REPORTING 611 )
Employee not eligible for award ( HRCMP00REPORTING 655 )
Comparison wage type & is already included in the basic pay ( HRCMP00REPORTING 717 )
Component &1 does not exist ( HRCMP00TABLES 001 )
Fixed compensation component &1 for area &2 on &3 does not exist ( HRCMP00TABLES 002 )
Variable compensation component &1 for area &2 on &3 does not exist ( HRCMP00TABLES 003 )
Stock compensation component &1 for area &2 on &3 does not exist ( HRCMP00TABLES 004 )
Compensation area &1 does not exist ( HRCMP00TABLES 005 )
Compensation adjustment &1 on &2 does not exist ( HRCMP00TABLES 006 )
Compensation component &1 can not be defined as "variable" ( HRCMP00TABLES 007 )
Compensation type &1 not valid for fixed components ( HRCMP00TABLES 008 )
Compensation type &1 not valid for stock components ( HRCMP00TABLES 009 )
Compensation adjustment &1 for area &2 on &3 does not exist ( HRCMP00TABLES 017 )
Eligibility rule &1 for eligibility group &2 on &3 does not exist ( HRCMP00TABLES 018 )
Plan period &1 does not exist ( HRCMP00TABLES 019 )
Compensation adjustment type &1 for adjustment reason &2 does not exist ( HRCMP00TABLES 020 )
Adjustment reason & does not exist ( HRCMP00TABLES 021 )
Guidelines for wage type &1 in compensation area &2 on &3 do not exist ( HRCMP00TABLES 024 )
Appraisal criterion &3 for PSG &1 and ESP &2 does not exist on &4 ( HRCMP00TABLES 027 )
Country grouping for personnel area &1 not found ( HRCMP00TABLES 029 )
HCM, Declustering Tools business function is switched off ( HRDCT_MSG 000 )
Declustering of table &1 is skipped due to database connection &2 failure ( HRDCT_MSG 001 )
Declustering is not possible; one or more tables do not exist ( HRDCT_MSG 004 )
Database connection to &1 failed; contact system administrator ( HRDCT_MSG 005 )
Internal error &1; contact system administrator ( HRDCT_MSG 006 )
Declustering tool for CE with RELID &1 is switched off ( HRDCT_MSG 009 )
HCM, Concurrent Employment business function is not activated ( HRDCT_MSG 011 )
Business function HCM, Declustering for CE is not activated ( HRDCT_MSG 012 )
Error during Test-Payroll Result generation ( HRDCT_MSG 013 )
Documentation is not dependent on the client ( HRDSYS 008 )
The documentation from client &1 is displayed ( HRDSYS 009 )
Changes are not transported ( HRDSYS 017 )
Object &1 &2 &3 has no TADIR entry, or does not exist ( HRDSYS 034 )
The documentation must not be deleted (a link still exists) ( HRDSYS 058 )
The documentation was not saved ( HRDSYS 321 )
Save your entries ( HRDSYS 323 )
Docu can only be deleted using maintenance transaction for object ( HRDSYS 504 )
Docu can only be transported using maintenance transaction for object ( HRDSYS 505 )
Docu can only be created using maintenance transaction for object ( HRDSYS 506 )
Documentation for class &1 must be maintained in client &2 ( HRDSYS 510 )
The entered number is not a binary number ( HRDSYS 515 )
Do not enter object information for docu that is not object-dependent ( HRDSYS 523 )
Specify a development class for the translation ( HRDSYS 542 )
Documentation for &1 &2 &3 does not exist in the relevant language ( HRDSYS 551 )
No procedure selected ( HRDSYS 601 )
LOIO creation error (client &1, obj.type &2, ctry gr. &3, obj.name &4) ( HRDSYS 602 )
Customizing client specified incorrectly ( HRDSYS 603 )
Preferred master language has not been specified for texts ( HRDSYS 604 )
Feature DSYSL has not been generated ( HRDSYS 605 )
Conversion not allowed in client &1 ( HRDSYS 608 )
System includes customer-specific RPDSYS docu - PLEASE read the long text ( HRDSYS 612 )
Conversion not possible ( HRDSYS 613 )
&1 write errors occurred when creating LOIOs in client &2 ( HRDSYS 614 )
PHIOs (texts) were not created ( HRDSYS 615 )
&1 write errors occurred when creating PHIOs in client &2 ( HRDSYS 617 )
Conversion of texts is incomplete because of previous errors ( HRDSYS 618 )
Customer-specific documentation class &1 could not be created ( HRDSYS 619 )
System type could not be determined ( HRDSYS 620 )
Conversion of RPDSYS documents successful ( HRDSYS 621 )
Conversion of HRDSYS documents successful - XPRA end ( HRDSYS 630 )
HRDSYS documents not converted ( HRDSYS 631 )
Program only runs when notes 183116 and 395586 are in the system ( HRDSYS 713 )
No objects missing from table SMODILOG ( HRDSYS 714 )
Employee Currency for &1 not read; no Basic Pay found from &2 to &3 ( HRECM00ADJUST0759 050 )
Changes to compensation data ITs cannot be undone - read long text! ( HRECM00ADMINFOTYPES 006 )
Use the Change Process Status transaction to set the status to "Active" ( HRECM00ADMINFOTYPES 011 )
Guideline not allowed for LTI plan because it is defined by amounts/perc. ( HRECM00ADMVIEWS 015 )
Guideline only allowed for LTI plan because it is defined by numbers ( HRECM00ADMVIEWS 016 )
Guideline not allowed for salary adjustment because frequency not defined ( HRECM00ADMVIEWS 017 )
Cannot create budget; check your data ( HRECM00BDG 003 )
Cannot read object & & from database ( HRECM00BDG 006 )
Mismatch between objects when creating internal budget ( HRECM00BDG 010 )
Mismatch in structure when creating internal budget ( HRECM00BDG 011 )
Financing organizational unit &1 &2 is locked by user &3 ( HRECM00BDG 012 )
Mismatch between budget structure and Budget Admin. IT (1500) for & & ( HRECM00BDG 018 )
All budgets must have the status 'Released'; check budget & ( HRECM00BDG 024 )
Customizing and budget data are inconsistent for & & ( HRECM00BDG 026 )
Stock unit inconsistency for &1 &2 with stock unit &3 ( HRECM00BDG 027 )
No function module name when calling HR_ECM_RECURSE_DOWN_BUDGET ( HRECM00BDG 030 )
Could not delete budget ( HRECM00BDG 035 )
Could not delimit budget during deletion ( HRECM00BDG 036 )
Mismatch between budget structure and object & & ( HRECM00BDG 038 )
Inconsistent parameters for changing parent budget values ( HRECM00BDG 039 )
Mismatch between budget structure and budget when calculating own budget ( HRECM00BDG 040 )
Mismatch between budget structure and budget when checking status ( HRECM00BDG 041 )
Mismatch between budget structure and budget when updating values ( HRECM00BDG 042 )
Mismatch between budget structure and budget during assigment ( HRECM00BDG 053 )
Cannot assign to budget; check your data ( HRECM00BDG 065 )
Mismatch between budget structure and budget during operation ( HRECM00BDG 070 )
Incorrect parameter when calling function HR_ECM_CHANGE_BUDGET_VALUE ( HRECM00BDG 078 )
Unable to update spent values for employee &1 for budget &2 ( HRECM00BDG 102 )
Budget reassignment not possible; budget spent and control param. not set ( HRECM00BDG 106 )
No entry for pay category &1 in attributes table T71JPR29 ( HRECM00JPR 048 )
New salary &1 of &2 on &3 is no longer within the range (&4) ( HRECM00MASTERDATA 004 )
Future basic pay record of &1 on &2 could not be updated ( HRECM00MASTERDATA 008 )
&1 does not have a salary structure acc. to basic pay record on &2 ( HRECM00MASTERDATA 012 )
Specify an organizational unit by using one of the input fields ( HRECM00PROCTRACKING 112 )
Specify an organizational unit with subordinates ( HRECM00PROCTRACKING 113 )
The org. unit was changed. Update planning for the org. unit ( HRECM00PROCTRACKING 123 )
Errors occurred for the org. unit. The org. unit is locked ( HRECM00PROCTRACKING 125 )
The org. unit was processed because it is superior to org. unit &1 ( HRECM00PROCTRACKING 130 )
Employee with NI no &1 could not be matched to a personnel number ( HREFIGB 007 )
Employee is inactive on the date of the infotype update ( HREFIGB 008 )
Incoming form is ready for update to the infotype ( HREFIGB 009 )
This record has the same key as another record; update is not possible ( HREFIGB 011 )
More than one personnel number matched to National Insurance number ( HREFIGB 012 )
Form cannot be processed as the effective date is in a previous tax year ( HREFIGB 016 )
Unprocessed form with an earlier issue date: &1 exists ( HREFIGB 019 )
Form updates more than one infotype; select all related records ( HREFIGB 020 )
Student loan record does not exist for this employee ( HREFIGB 023 )
Student loan already exists on the effective date &1 of the new SL1 ( HREFIGB 034 )
No credentials found for tax ref &1/&2; maintain the appropriate IMG step ( HREFIGB 035 )
PAYE Incoming record = &1 &2 ; employee assignment = &3 &4 ( HREFIGB 038 )
Move record to a processing section; all associated duplicates checked ( HREFIGB 039 )
New &1 has zero values for previous pay/tax. ( HREFIGB 042 )
&1 previous pay/tax differ from IT 0065 record; new values will be used ( HREFIGB 043 )
National Insurance number not provided ( HREFIGB 045 )
P9 record has an effective date &1; this is not between 06 and 30 April ( HREFIGB 046 )
P9 record has an effective date of &1; normally this date is 06 April ( HREFIGB 047 )
No record associated with this duplicate has been moved to processing ( HREFIGB 048 )
No records to display for given selection ( HREFIGB 050 )
Personnel number entered is not a valid personnel number in the system ( HREFIGB 052 )
Incoming record was changed manually to an error status ( HREFIGB 053 )
Student Loan Form SL1 has blank for plan type. ( HREFIGB 059 )
Incoming P6 form has an 'NT' tax code; Week1/Month1 indicator will be set ( HREFIGB 060 )
PE/Tax values will be copied from IT0065, as new form has blanks. ( HREFIGB 068 )
PE/Tax will be set to zero(0.00) as incoming record has 0 values. ( HREFIGB 070 )
Role of current client could not be determined; system error suspected ( HREFIGB 101 )
&1 with &2 as &3 will create Arrears. No Arrears created with &4 as &3 ( HREFIGB 701 )
&1 with &2 as &3 will refund Student Loan. No refund made with &4 is &3. ( HREFIGB 702 )
XML Business Error &1 ( HREFIGB 899 )
Invalid format entered; see long text ( HREG_PA01 001 )
This report is only for monthly payroll. ( HREG_PY01 003 )
Please exclude &1 payroll areas. ( HREG_PY01 004 )
Enter a parameter and tab page. ( HREIC 102 )
Check if the contact type is correct ( HREIC_APPL_VP 013 )
You do not have authorization to process employee number & ( HREIC_APPL_VP 800 )
The value of authorization & is unknown. Save canceled ( HREIC_APPL_VP 806 )
An authority instance could not be created for user &1 ( HREIC_APPL_VP 808 )
The owner org. unit does not have authorization for this activity ( HREIC_APPL_VP 814 )
The owner does not have the authorization to change this activity ( HREIC_APPL_VP 815 )
The processor org. unit does not have the authorization for this activity ( HREIC_APPL_VP 816 )
The processor does not have the authorization to change this activity ( HREIC_APPL_VP 817 )
You do not have the authorization to edit activities for employee &1 ( HREIC_APPL_VP 818 )
No authorization to change the activity. Change owner/processor ( HREIC_APPL_VP 819 )
Owner does not have activity authorization. Save canceled ( HREIC_APPL_VP 820 )
Owner processor does not have authorization. Save canceled ( HREIC_APPL_VP 821 )
Owner does not have authorization for employee. Save canceled ( HREIC_APPL_VP 822 )
Processor responsible does not have auth. for employee. Save canceled ( HREIC_APPL_VP 823 )
Owner org. unit does not have authorization for employee. Save canceled ( HREIC_APPL_VP 824 )
Processor org. unit does not have auth. for employee. Save canceled ( HREIC_APPL_VP 825 )
Note that the assigned process is not destroyed ( HREIC_ARC 025 )
Invalid personnel number &1 ( HRESS 016 )
An error has occurred in program &2, line &3 ( HRESS 031 )
Attributes of Roster Point &1 are not maintained. ( HRESS_CLMS_MSG 042 )
The total roster points are more than the cadre strength. ( HRESS_CLMS_MSG 050 )
Number of Loans granted for this loan type cannot exceed 99 in IT-0045. ( HRESS_CLMS_MSG 519 )
BADI must be implemented to fill number of required multiple line items ( HRESS_CLMS_MSG 565 )
Do not configure Payment not Required for this reimbursement type ( HRESS_CLMS_MSG 579 )
Do not set period frequency as the reimbursement type ( HRESS_CLMS_MSG 580 )
Dependents should be used at Header Level or Both ( HRESS_CLMS_MSG 581 )
Off-cycle reason &1 is invalid for infotype &2 ( HRESS_HRPADBR_LVP 003 )
Document type &1 is not linked to an archive link ( HRESS_PTARQ 200 )
Document type &1 is not configured ( HRESS_PTARQ 201 )
File type is not configured ( HRESS_PTARQ 204 )
Error occurs while opening the document ( HRESS_PTARQ 208 )
LDAP key &1 is assigned more than once ( HREXP 016 )
Entries with errors exist (compare the status) ( HREXP 017 )
Only use the characters 'A..Z' '0..9' and '_'; Elements -> Long Text ( HREXP 054 )
Required entry for elements from external systems not allowed ( HREXP 055 )
Changes to input help can cause data loss ( HREXP 056 )
You must enter an icon for recorded actions 2 and 3 ( HREXP 058 )
Profile type &1 is still being used in communities &2 ( HREXP 060 )
Search scenario &1 is still being used in communities &2 ( HREXP 061 )
Automatic set up only possible for specified key field ( HREXP 062 )
Flexible benefits is not activated for benefit area &1 ( HRFBN00GENERAL 001 )
No standard option defined for &1/&2/&3/&4 ( HRFBN00GENERAL 002 )
Non-company car plan is not allowed under the adjustment reason &1 ( HRFBN00GENERAL 004 )
Employee holiday buy/sell grouping cannot be obtained from feature BSGRP ( HRFBN00GENERAL 007 )
Flex fund overspending limit exceeded ( HRFBN00GENERAL 010 )
You must enrol in &1 option &2 first ( HRFBN00GENERAL 021 )
You must also enrol &1 option &2 ( HRFBN00GENERAL 022 )
&1 option must be &2 ( HRFBN00GENERAL 023 )
You cannot stop participation in &1 while &2 remains enroled ( HRFBN00GENERAL 024 )
Annual post-flex salary is less than the required minimum amount &1 &2 ( HRFBN00GENERAL 026 )
Multiple actions have occurred for plan &1; please check ( HRFBN00TOOLREPORTS 002 )
Report date &1 is earlier than comparison TemSe file date &2 ( HRFBN00TOOLREPORTS 005 )
Plan type & cannot be used in this view ( HRFBN00VIEWS 003 )
Do not maintain plan &1 using this maintenance view ( HRFBN00VIEWS 005 )
Quota type & is not permitted ( HRFBN00VIEWS 006 )
You must maintain the percentage field and set the underspend indicator ( HRFBN00VIEWS 009 )
You must maintain the percentage field and set the overspend indicator ( HRFBN00VIEWS 011 )
Validity period of plan &1 is different from infotype validity period ( HRFBNGBSPECIFIC 002 )
Class 1A NI contributions percentage is not defined ( HRFBNGBSPECIFIC 003 )
Ensure National Insurance category stored in infotype 0069 is correct ( HRFBNGBSPECIFIC 004 )
Current value of pension selling surplus not permitted ( HRFBNGBSPECIFIC 005 )
You must join pension scheme & before salary sacrifice plan & enrollment ( HRFBNGBSPECIFIC 111 )
You have no valid pension scheme for plan enrollment. Please contact HR. ( HRFBNGBSPECIFIC 115 )
There is no infotype 0442 record for personnel number &1 on &2 and &3 ( HRFBNGBSPECIFIC 153 )
You cannot enrol &1 at this stage of the process ( HRFBNGBSPECIFIC 154 )
Flexed value period is not defined for benefit area &1 on &2 ( HRFBNGBSPECIFIC 155 )
Last car record is taken for company car enrolment ( HRFBNGBSPECIFIC 156 )
Value of regular payment in Infotype 0442 not initial, will be replaced ( HRFBNGBSPECIFIC 158 )
Option &1 cannot be integrated to infotype Company Car (0442) ( HRFBNGBVIEWS 001 )
Generated print program contains a syntax error ( HRFORMS 011 )
Generated DDIC structures for dimension &1 contain errors ( HRFORMS 012 )
Generated DDIC structures for InfoStar &1 contain errors ( HRFORMS 013 )
Generated DDIC structure for form &1 contains errors ( HRFORMS 014 )
Form name &1 not active for form &2 ( HRFORMS 021 )
MetaStars that are not allowed in form class &1 are inactive ( HRFORMS 027 )
Print program not activated for form &1 ( HRFORMS 031 )
DDIC structures not activated for form &1 ( HRFORMS 032 )
Generation not possible; InfoStar &1 is empty ( HRFORMS 033 )
There is an inactive version of the form name for this form ( HRFORMS 035 )
Enter the correct form name ( HRFORMS 038 )
Interface &1 already exists ( HRFORMS 041 )
Form &1 already exists ( HRFORMS 042 )
Could not create form &1 or interface &1 ( HRFORMS 043 )
Control framework cannot be initialized ( HRFORMS 100 )
Drag&Drop and/or pasting not allowed for the selected object ( HRFORMS 151 )
Selection of MetaStars and MetaDimensions not allowed ( HRFORMS 154 )
Selection of MetaDimensions not allowed ( HRFORMS 155 )
InfoObject & already exists ( HRFORMS 156 )
InfoObject &1 is not permitted in InfoStar &2 ( HRFORMS 157 )
&1 is in the international part of &2 ( HRFORMS 610 )
Text is in the international part of &2 ( HRFORMS 612 )
Enter the start and end date fields or leave them both blank ( HRFORMS 614 )
MetaNet &3 and MetaStar &1 have different country groupings ( HRFORMS 623 )
&1 was not deleted ( HRFORMS 647 )
The documentation is included in the international part of &1 ( HRFORMS 648 )
MetaDimension WAGETYPE cannot be read by a function module ( HRFORMS 650 )
Clipboard cannot be pasted here ( HRFORMS 666 )
MetaStars cannot be passed from country &2 to country &4 ( HRFORMS 669 )
Inheritance is contained in the international part of MetaNet &1 ( HRFORMS 677 )
Error when reading data for PAYMENTS MetaStar for PerNo &1, SeqNo &2 ( HRFORMS 707 )
Company code data could not be read for company code &1 ( HRFORMS 708 )
Data on payee key &1 could not be read for date &2 ( HRFORMS 709 )
Check number could not be read: PerNo &1, SeqNo &2, BTLNo &3 ( HRFORMS 710 )
You are not allowed to use the logical database to sort ( HRFORMS 712 )
No employee language if all employees are in one form ( HRFORMS 715 )
Object does not exist ( HRFPM 000 )
No active plan variant found, Customizing setting required ( HRFPM 001 )
Error handling could not be completed ( HRFPM 002 )
Error during reading of infotype &1; see long text ( HRFPM 003 )
Error when object collector initialized ( HRFPM 004 )
Error during database table update ( HRFPM 006 )
Only one instance of object collector is allowed for a run. ( HRFPM 007 )
No logs found for the selected values ( HRFPM 009 )
No filter value for BAdI implementation of object collector ( HRFPM 010 )
Parameters of variant &1 of object collector not allowed ( HRFPM 011 )
Parameter type defined for variant is invalid ( HRFPM 012 )
Object collector failed ( HRFPM 013 )
No parameter types maintained for the current variants ( HRFPM 015 )
The parameter type or corresponding DDIC object are initial ( HRFPM 016 )
The parameter type of the two import parameters do not match ( HRFPM 019 )
The person/position does not participate in automatic bdgt/cmmt creation ( HRFPM 020 )
The object table & for this run should be empty ( HRFPM 023 )
There are already entries in table & for this run ( HRFPM 024 )
Error when inserting records in table & ( HRFPM 025 )
Error occured when processing dependent objects ( HRFPM 026 )
Error when determining the dependent objects ( HRFPM 027 )
Error during transfer of objects; see long text ( HRFPM 031 )
Only select one variant as the standard variant ( HRFPM 033 )
Check the log on run &1 ( HRFPM 036 )
Internal error reading feature &1 ( HRFPM 042 )
No currency found for document creation ( HRFPM 046 )
Payroll Sim.: Error determining country grouping (&1, &2) ( HRFPM 055 )
Payroll Sim.: No pay scale indicator for PERSG &1 and PERSK &2 ( HRFPM 056 )
Payroll simulation: error during determination of program for LdGrp &1 ( HRFPM 057 )
Payroll simulation: error in variant determination (feature PM004) ( HRFPM 058 )
Payroll Simulation: No variants found for payroll program ( HRFPM 059 )
Payroll Simulation: Error transferring for person &1 ( HRFPM 061 )
You are not authorized to process all documents ( HRFPM 065 )
Error while deleting ( HRFPM 079 )
Person &1 is flagged for refinancing; see long text ( HRFPM 100 )
No commitment periods defined between &1 and &2; see long text ( HRFPM 101 )
Error determining new number from number range &1 ( HRFPM 102 )
Error during 'Two Face Commit' ( HRFPM 105 )
A serious error has occurred ( HRFPM 106 )
No filter found for BAdI (participation in automatic commitment creation) ( HRFPM 108 )
Error when creating job ( HRFPM 110 )
Person locked for commitment creation ( HRFPM 111 )
Error when activating personnel cost savings; check Customizing ( HRFPM 112 )
Choose a permitted object type ( HRFPM 117 )
Business Information Warehouse (BW) update failed ( HRFPM 118 )
No own logical system defined; adjust Customizing ( HRFPM 122 )
Error when determining commitment periods; check Customizing ( HRFPM 126 )
Gaps found in definition of commitment periods; correct Customizing ( HRFPM 132 )
Error during database update ( HRFPM 141 )
Error in document processing; see long text ( HRFPM 147 )
Internal error when creating document ( HRFPM 148 )
Error in PBC document ( HRFPM 149 )
Inconsistent PBC document - missing positions ( HRFPM 150 )
Dependent PBC document is missing ( HRFPM 151 )
Error during reconciliation of PBC document ( HRFPM 152 )
Error when reconciling personnel cost savings for &1 &2 ( HRFPM 159 )
Parameter type &1 of object collector is not allowed; check Customizing ( HRFPM 161 )
Filter for variant &1 of object collector does not exist ( HRFPM 162 )
No parameter type found for variant &1 of object collector ( HRFPM 163 )
DDic type &1 of parameter type &2 does not exist; see long text ( HRFPM 164 )
Determination of commitment period incorrect ( HRFPM 180 )
Document & could not be locked ( HRFPM 184 )
Customizing for budget creation in FM incorrect; see long text ( HRFPM 185 )
Wrong date determined in BAdI HRFPM_DC_PERIOD ( HRFPM 186 )
Wrong date determined in BAdI HRFPM_REQUIREMENTS_FILTER ( HRFPM 188 )
Missing variant for module &2; adjust Customizing ( HRFPM 190 )
No period found for automatic commitment creation; check Customizing ( HRFPM 191 )
Only select one active variant for the commitment period ( HRFPM 192 )
Run variant &1 does not exist; check Customizing ( HRFPM 193 )
Filter in variant &1 of object collector is initial; check Customizing ( HRFPM 194 )
Variant &1 of object collector does not exist; check Customizing ( HRFPM 195 )
Filter for variant &1 of error handling does not exist; see long text ( HRFPM 200 )
Variant &1 of error handling does not exist; check Customizing ( HRFPM 201 )
Filter for variant &1 of output does not exist; check Customizing ( HRFPM 202 )
Variant &1 of output does not exist; check Customizing ( HRFPM 203 )
Report variant &1 for report &2 does not exist; check Customizing ( HRFPM 205 )
Inconsistent variant &1 of data collector; check Customizing ( HRFPM 208 )
Detail variant &1 of data collector does not exist; check Customizing ( HRFPM 209 )
Detail variant &1 of data collector inconsistent (filter missing) ( HRFPM 210 )
Filter for determination of requirements BAdI missing; check Customizing ( HRFPM 211 )
Error in number range object for run numbers ( HRFPM 221 )
Unknown Error ( HRFPM 227 )
Person responsible for current run missing; check Customizing ( HRFPM 233 )
Define a run variant as standard in Customizing; see long text ( HRFPM 234 )
Run log cannot be saved ( HRFPM 235 )
Inconsistent entry in table HRFPM_EXC_ACCASS (&1) ( HRFPM 237 )
Error in start of run ( HRFPM 240 )
Mark a line that only one line item refers to ( HRFPM 248 )
Only one receiver line can be specified; see long text ( HRFPM 249 )
Major error: Error during error handling ( HRFPM 250 )
Error raising Workflow event (object = &3 / event = &2 / key &1) ( HRFPM 251 )
Error during deletion of workflow item (item &1) ( HRFPM 252 )
Workflow error handling not successful ( HRFPM 253 )
Error when triggering workflow event &1 ( HRFPM 254 )
Error in structure evaluation during workflow ( HRFPM 255 )
Transfer not possible; see long text ( HRFPM 258 )
Unknown error ( HRFPM 261 )
Referenced document (&1) has incorrect posting status &2; see long text ( HRFPM 266 )
Document & could not be locked ( HRFPM 267 )
Inconsistent object table ( HRFPM 270 )
Error in dependent object &1 (responsible object &2) ( HRFPM 275 )
Error when determining participation in automatic commitment creation ( HRFPM 276 )
Internal Error -> source object registration incorrect ( HRFPM 277 )
Internal Error -> registration of dependent object incorrect ( HRFPM 278 )
Change in commitment creation: object cannot be registered ( HRFPM 282 )
Change in commitment creation: new status cannot be saved ( HRFPM 283 )
Authorization missing for determining dependent objects ( &1 ) ( HRFPM 284 )
Decoupled doc. creation not possible for prsnnl cost savings; s. longtext ( HRFPM 287 )
Person &1 is flagged for (decoupled) update ( HRFPM 288 )
You have no authorization to display the data ( HRFPM 314 )
Incorrect definition of structure &1 and target field &2 (enhancement &3) ( HRFPM 333 )
Enter message interval; generic entries are not allowed ( HRFPM 335 )
Inconsistent completed indicator in document &1 &2 ( HRFPM 340 )
A financing requirement could not be locked after &1 attempts ( HRFPM 347 )
No responsible person defined for run &1 (variant &2) ( HRFPM 370 )
Position and holder unlocked for commitment creation and payroll ( HRFPM 450 )
Position and holder locked for commitment creation and payroll ( HRFPM 451 )
Person and position unlocked for commitment creation and payroll ( HRFPM 452 )
Person and Position locked for commitment creation and payroll ( HRFPM 453 )
Position &1 locked for commitment creation and payroll ( HRFPM 454 )
Person &1 locked for commitment creation and payroll ( HRFPM 455 )
Actions flagged for line item (&1/&2/&3) were reset ( HRFPM 492 )
Line item (&1/&2/&3) has not been approved in Acctng; see long text ( HRFPM 495 )
Personnel number &1 was marked for retroactive accounting for &2 ( HRFPM 501 )
Personnel number &1 could not be marked for retroactive accounting ( HRFPM 502 )
Closed document &1 cannot be processed in open period &2 ( HRFPM 505 )
Open document &1 cannot be processed in closed period &2 ( HRFPM 506 )
Closed line item &1 cannot be processed in open period &2 ( HRFPM 507 )
Open line item &1 cannot be processed in closed period &2 ( HRFPM 508 )
Inconsistent profile ( HRFPM 509 )
Person responsible for run &1 variant &2 could not be determined ( HRFPM 604 )
The PCB individual document referenced by (&1) does not exist ( HRFPM 801 )
Different account assignment in PBC individual docs (&1) and (&2) ( HRFPM 802 )
PBC totals document (&1): difference is &2 ( HRFPM 803 )
Accounting document (&1): difference is &2 ( HRFPM 804 )
Change to original budget (FTE) only in year slices ( HRFPMCUSTOM 011 )
Change to original budget (funds) only in year slices ( HRFPMCUSTOM 012 )
Infotype change before &1 ( HRFPMCUSTOM 014 )
Activation of note before &1 ( HRFPMCUSTOM 015 )
Create, delimit, delete before &1 ( HRFPMCUSTOM 016 )
Currency key is not filled. Please check. ( HRFPMCUSTOM 102 )
**** Mass Finance ********* ( HRFPMCUSTOM 110 )
Select a reporting set or a personnel number ( HRFPMCUSTOM 111 )
Error occurred when infotype & was being created ( HRFPM_FTE 020 )
It can only be hierarchically included BS elements & ( HRFPM_FTE 027 )
Changes before the & are not allowed; system splits the sentence ( HRFPM_FTE 034 )
You are not allowed to change/delete this record; see longtext ( HRFPM_FTE 035 )
Budget structure element cannot be used for financing ( HRFPM_FTE 038 )
Customizing V_T7PMM_S not performed for budget type grp 01, infotype 1504 ( HRFPM_FTE 056 )
Financing using a split with infotype 1520 is not permitted ( HRFPM_FTE 136 )
Person &1 is financed in leaving period &2 - &3 ( HRFPM_FTE 215 )
You have open dates for budget structure elements ( HRFPM_FTE 403 )
No availability check was carried out for object &1 &2 ( HRFPM_FTE 424 )
Activation of budgeting rule takes effect on &1 ( HRFPM_FTE 688 )
It is not possible to delete temporary locks; see long text ( HRFPM_FTE 694 )
Budget update for this BS element category is not possible; see long text ( HRFPM_FTE 718 )
Transfer postings for this BS element category not possible;see long text ( HRFPM_FTE 719 )
Value of the pay scale evaluation for conversions not found ( HRFPM_FTE 720 )
End date adjusted to maximum possible value; see long text ( HRFPM_FTE 721 )
Missing valuation in budget structure element &1 ( HRFPM_FTE 723 )
Infotype for pay scale evaluation not found; see long text ( HRFPM_FTE 751 )
Use the quantity-based transfer posting; see long text ( HRFPM_FTE 752 )
Quantity-based conversion not possible; see long text ( HRFPM_FTE 753 )
You are not allowed to execute the workflow; see long text ( HRFPM_FTE 757 )
Position is staffed from &1 to &2 by person &3; see long text ( HRFPM_FTE 762 )
Change to note type not permitted; see long text ( HRFPM_FTE 782 )
&2 (&1): From &3 to &4 ( HRFPM_FTE 803 )
You are not authorized to use grouping &1; see long text ( HRFPM_FTE 804 )
Check result for financing &3 in period &4: &1 &2 ( HRFPM_FTE 808 )
Check result for staff assignment &3 in period &4: &1 &2 ( HRFPM_FTE 809 )
Exception &1 is not an exception for financing rules ( HRFPM_FTE 810 )
Exception &1 is not an exception for availability control ( HRFPM_FTE 811 )
National Insurance Number Invalid (&1 &2-&3: Check &4) ( HRGB 023 )
EPS contains insufficient data. Check long text for more information ( HRGB_GBRTI 127 )
For Flexible Draw down,either taxable or non taxable field must be filled ( HRGB_GBRTI 129 )
Start date found but other required fields are missing. Check long text ( HRGB_GBRTI 131 )
Collision occurred during NCALE processing on &1 ( HRGB_GBSXP 001 )
GBSXP failed to update all the "P"eriod marks that need to be updated ( HRGB_GBSXP 002 )
Period history corrupted for absence &1 between &2 - &3 ( HRGB_GBSXP 003 )
NCALE "P"eriod mark missing on &1 ( HRGB_GBSXP 004 )
Period mark on &1 cannot be processed by period &2 - &3 ( HRGB_GBSXP 008 )
&1 Exclusion; On &2, employee AWE &3 is less than Weekly LEL &4 ( HRGB_GBSXP 011 )
DTO check error: infotype 0014 contains no entry for &1 (&2 - &3) ( HRGB_GBSXP 014 )
Payroll Go-Live date &1 must equal period start date &2 (Feature GBPLG) ( HRGB_GBSXP 018 )
DTO check warning: infotype 0014 contains no entry for &1 (&2 - &3) ( HRGB_GBSXP 023 )
No record exists for &1 and &2 in SxP Exclusion Reasons(Table T5G2F_DATE) ( HRGB_GBSXP 029 )
No part day valuation class exists (T5GPBS25:MOLGA &1 KLBEW &2) ( HRGB_GBSXP 053 )
No valuation basis in table T512W (MOLGA &1 LGART &2 on &3) ( HRGB_GBSXP 054 )
Wage type group &1 contains no wage types (Table T52D7) ( HRGB_GBSXP 057 )
SAP payment; No SSP paid during SAP week (&1 - &2), so SAP paid on &3 ( HRGB_GBSXP 060 )
SPP payment; No SSP paid during SPP week (&1 - &2), so SPP paid on &3 ( HRGB_GBSXP 061 )
Fill RT Error; On &1, MSA exists without a corresponding AB record ( HRGB_GBSXP 062 )
Invalid entry in table T554C (MOABW &1 KLBEW &2 on &3 implies LGART &4) ( HRGB_GBSXP 063 )
SSP/SMP wage type not in table IT, check PCRs (ABZNR &1 LGART &2) ( HRGB_GBSXP 064 )
No offsetting possible, no OXP entries exist &1 - &2 (COVER) ( HRGB_GBSXP 065 )
Wage type &1 must be in table &2 to perform offsetting on &3 ( HRGB_GBSXP 069 )
Wage type &1 is defined in more than one OXP Wage Type Group ( HRGB_GBSXP 070 )
Fill IT Error; On &1, MSA exists with no corresponding AB record ( HRGB_GBSXP 071 )
Incorrect valuation basis in table T512W (MOLGA &1 LGART &2 on &3) ( HRGB_GBSXP 072 )
OXP wage type not in table IT; Check PCRs (ABZNR &1 LGART &2). ( HRGB_GBSXP 073 )
DTO wage type &1 not stored in IT0015 for first live payroll (&2 - &3) ( HRGB_GBSXP 074 )
No KIT day payment in table IT (ORT) for AB split &1 on &2 ( HRGB_GBSXP 075 )
SAP Error; Table PERIOD HISTORY contains no entries for absence &1 - &2 ( HRGB_GBSXP 112 )
SMP Error; Table PERIOD HISTORY contains no entries for absence &1 - &2 ( HRGB_GBSXP 208 )
SMP Warning; MPP previously excluded on &1 due to low AWE ( HRGB_GBSXP 220 )
SMP exclusion: On &1, employee has a new employer ( HRGB_GBSXP 224 )
SPP Error; Table PERIOD HISTORY contains no entries for absence &1 - &2 ( HRGB_GBSXP 311 )
SSP Error; Table PERIOD HISTORY contains no entries for absence &1 - &2 ( HRGB_GBSXP 420 )
SSP Error: Employee Grpg &1 &2 has no default QDP on &3 (Table T5G22) ( HRGB_GBSXP 427 )
SSP Error: QDP reference Sunday &1 after &2 T5GQDP_GPG ( HRGB_GBSXP 429 )
SSP Error: No weeks for QDP &1 in table T5GQDP_QDP ( HRGB_GBSXP 431 )
SSP Error: QDP generation error in QDP Grouping &1 on &2 table T5GQDP_GPG ( HRGB_GBSXP 432 )
SSP QDP Warning: On &1, old and new QPD solutions differ ( HRGB_GBSXP 434 )
SSP1 Warning: On &1, employee has been paid &2 weeks SSP ( HRGB_GBSXP 435 )
SSP1L Error: The form SSP1(L) is obsolete from 27.10.2008. ( HRGB_GBSXP 436 )
ME &1: Inconsistent absence between &2 and &3 ( HRGB_GBSXP 501 )
ME &1: Inconsistent SxP record between &2 and &3 (infotype 0088) ( HRGB_GBSXP 502 )
SPL/ShPP &1: Entitlement ceased &2 (DURING revocation period &3 - &4) ( HRGB_GBSXP 793 )
SPL/ShPP &1: Entitlement ceased &2 (AFTER revocation period &3 - &4) ( HRGB_GBSXP 794 )
MSAX-BFCUR must not be filled during retro periods (&1 &2) ( HRGB_GBSXP 801 )
MSAX-BFPRV must not be filled during non-retro periods (&1 &2) ( HRGB_GBSXP 802 )
The factor field in table &1 is empty. Run RPLABSG0_FILL_MSA_FACTOR ( HRGB_GBSXP 803 )
PMSAX-CFPRV must not be filled during non-retro periods (&1 &2) ( HRGB_GBSXP 804 )
MSAX-BFTYP must be filled for brought forward amounts (&1 &2) ( HRGB_GBSXP 805 )
No WPBP split exists on &1 ( HRGB_GBSXP 806 )
&1 Warning: The end of the placement(&2) has implications(Read Long Text) ( HRGB_GBSXP 821 )
&1 Warning: The death of the mother (&2) has implications(Read Long Text) ( HRGB_GBSXP 822 )
&1 Warning: The death of the adopter(&2) has implications(Read Long Text) ( HRGB_GBSXP 823 )
&1 Warning: The death of the partner(&2) has implications(Read Long Text) ( HRGB_GBSXP 824 )
&1 Warning: The death of the child (&2) has implications (Read Long Text) ( HRGB_GBSXP 825 )
LGPS: Contribution rate changed: &1 &2 &3 &4 ( HRGB_LGPS 001 )
LGPS: No LGPS schemes defined ( HRGB_LGPS 002 )
LGPS: Previous calculation of this pay period missing ( HRGB_LGPS 003 )
LGPS: Calculation of the previous pay period missing ( HRGB_LGPS 004 )
LGPS: Dates BADI has forced no re-assessment ( HRGB_LGPS 005 )
LGPS: Dates BADI has forced re-assessment ( HRGB_LGPS 006 )
LGPS: T5GPBSP_UNP entry missing (Sch/Date/PenPay &1 &2 &3) ( HRGB_LGPS 007 )
LGPS: T5GPBSP_PRO entry missing (Sch/Date &1 &2) ( HRGB_LGPS 008 )
LGPS: Wage Type Group &1 contains no Wage Types (Table T52D7) ( HRGB_LGPS 009 )
GBLGP Error: If Parameter &1 is set to &2, Parameter &3 must be set to &4 ( HRGB_LGPS 010 )
GBLGP Error: If Parameter &1 is set to &2 ( HRGB_LGPS 011 )
LGPS: 1st payroll in year flag overridden ( HRGB_LGPS 012 )
LGPS: WPBP and PENS must be kept in-sync if pro-ration is necessary ( HRGB_LGPS 013 )
Joining the 50/50 Scheme has an impact of additional pension contracts ( HRGB_LGPS 054 )
MPT Error: Wage Type &1 exists in RT during cleared payroll result (&2) ( HRGB_MPT 003 )
MPT Error: Wage Type &1 exists in RT during normal payroll result (&2) ( HRGB_MPT 004 )
MPT Error: NI Category change could not be processed ( HRGB_MPT 005 )
MPT Warning: P45 details should be present ( HRGB_MPT 006 )
MPT Error: Incomplete payroll result(s) prior to Mid-period Transfer ( HRGB_MPT 007 )
Processing date should be the first Monday in October. Please check! ( HRGB_NFI 000 )
Employee rejected as they do not have &1 on &2 ( HRGB_NFI 001 )
Transitional Period: Employee meets conditions (Read Long Text!) ( HRGB_PAE 352 )
Transitional Period: Employee no longer meets conditions(Read Long Text!) ( HRGB_PAE 353 )
PAE Error; Please check your feature GBAE8. (Read Long Text!) ( HRGB_PAE 462 )
PAE Transitional Period Applied: Automatic Enrolment on &1 into AES &2 ( HRGB_PAE 537 )
Employment Type could not be derived ( HRGB_SWF 001 )
Employment Type defaulted to '4' for central staff ( HRGB_SWF 002 )
Employment Type defaulted to &1 from T5GPBS_ALL entry ( HRGB_SWF 003 )
Staff Validation : Check &1 failed (details in "Long Text") ( HRGB_SWF 007 )
Contract Validation : Check &1 failed (details in "Long Text") ( HRGB_SWF 008 )
Payment Validation : Check &1 failed (details in "Long Text") ( HRGB_SWF 009 )
Absence Validation : Check &1 failed (details in "Long Text") ( HRGB_SWF 010 )
Qualification Validation: Check &1 failed (details in "Long Text") ( HRGB_SWF 011 )
Generic Validation : Check &1 failed (details in "Long Text") ( HRGB_SWF 012 )
Generic Validation : QT Status is required for &1 ( HRGB_SWF 018 )
Generic Validation : HLTA Status is required for &1 ( HRGB_SWF 019 )
Generic Validation : Pay Scale, Spine and Spine Point Mandatory ( HRGB_SWF 020 )
Vacancy Validation: Check &1 failed (details in "Long Text") ( HRGB_SWF 042 )
Staff Information Validation: Check &1 failed (details in "Long Text") ( HRGB_SWF 043 )
Educ.Psch. Validation: Check &1 failed (details in "Long Text") ( HRGB_SWF 044 )
TP MDC Error; Override wage type TPXW only allows value of 0, 1, 2 and 3 ( HRGB_TPS 038 )
TRANSITION Warning; TRANSITION employee, but has scheme &1 on &2 ( HRGB_TPS 130 )
TRANSITION Warning; PROTECTED employee, but has scheme &1 on &2 ( HRGB_TPS 131 )
TRANSITION Warning; TAPERED employee, but has scheme &1 on &2 ( HRGB_TPS 132 )
TRANSITION Error; TRANSITION employee cannot join &1 on &2 ( HRGB_TPS 133 )
TRANSITION Error; PROTECTED employee cannot join &1 on &2 ( HRGB_TPS 134 )
TRANSITION Error; TAPERED employee cannot join &1 on &2 ( HRGB_TPS 135 )
TRANSITION Error; Change from Final Salary to CARE has not taken place ( HRGB_TPS 136 )
TRANSITION Warning; Change from Final Salary to CARE will not take place ( HRGB_TPS 137 )
GBLGP: Teachers' Pension: Employee percentage changed from &1 to &2 ( HRGB_TPS 201 )
If you select 'No sending Per.', do not maintain any other fields ( HRGP0000 001 )
Type of data exchange and 'master-servant' do not go together ( HRGP00GENERAL 006 )
Appraisal document status set to '&1' (&2) ( HRHAP00_ACTION_LOG 000 )
Appraisal document status set to 'In Preparation' (&1) ( HRHAP00_ACTION_LOG 011 )
Appraisal document status set to 'In Planning' (&1) ( HRHAP00_ACTION_LOG 012 )
Appraisal document status set to 'In Review' (&1) ( HRHAP00_ACTION_LOG 013 )
Appraisal document status set to 'In Process' (&1) ( HRHAP00_ACTION_LOG 014 )
Appraisal document status set to 'Completed' (&1) ( HRHAP00_ACTION_LOG 015 )
Appraisal document status set to 'Approved' (&1) ( HRHAP00_ACTION_LOG 016 )
Appraisal document status set to 'Rejected' (&1) ( HRHAP00_ACTION_LOG 017 )
Appraisal document status set to 'Closed Approved' (&1) ( HRHAP00_ACTION_LOG 018 )
Appraisal document status set to 'Closed Rejected' (&1) ( HRHAP00_ACTION_LOG 019 )
Part appraisal deleted (Appraiser: &1) ( HRHAP00_ACTION_LOG 059 )
Attachment '&1' has been added ( HRHAP00_ACTION_LOG 120 )
Attachment '&1' has been deleted ( HRHAP00_ACTION_LOG 121 )
Enter a valid date for goal '&1' ( HRHAP00_CASCADING 012 )
Too many forms selected ( HRHAP00_CASCADING 030 )
No allowed object type found ( HRHAP00_DOCUMENT 007 )
Form does not exist ( HRHAP00_DOCUMENT 015 )
Template '&1' is not released ( HRHAP00_DOCUMENT 016 )
Cannot prepare appraisal document for the selected entries ( HRHAP00_DOCUMENT 019 )
Smart Form template does not exist ( HRHAP00_DOCUMENT 033 )
Administrator functions not available ( HRHAP00_DOCUMENT 034 )
Detailed definition not possible; select one template only ( HRHAP00_DOCUMENT 036 )
Appraisal document closed ( HRHAP00_DOCUMENT 046 )
You cannot make the requested status change ( HRHAP00_DOCUMENT 048 )
Combination of sequence and execution period is not allowed ( HRHAP00_DOCUMENT 075 )
&1 '&3' is not permitted ( HRHAP00_DOCUMENT 076 )
Notes are not allowed for column '&1' ( HRHAP00_DOCUMENT 104 )
No implementation of BAdI '&1' ('&2' of column '&3') ( HRHAP00_DOCUMENT 152 )
Appraisal '&1' has status 'In Preparation'; cannot be processed offline ( HRHAP00_DOCUMENT 181 )
Offline-appraisal-document ID &1 not found ( HRHAP00_DOCUMENT 193 )
Function for creating attachments does not exist ( HRHAP00_DOCUMENT 205 )
Value '&1' corrected automatically (element: &2; column: &3) ( HRHAP00_DOCUMENT 210 )
Value '&1' invalid (element: &2, column: &3) ( HRHAP00_DOCUMENT 211 )
No value list maintained for the chosen cell ( HRHAP00_DOCUMENT 212 )
All cell values are valid and consistent ( HRHAP00_DOCUMENT 213 )
No base object given for this selection ( HRHAP00_DOCUMENT 260 )
No dependent entry found for &1 '&2' ( HRHAP00_DOCUMENT 261 )
&1 '&2' does not head an organizational unit ( HRHAP00_DOCUMENT 262 )
Only one template allowed in combination with the Without Document option ( HRHAP00_DOCUMENT 278 )
No part appraisers allowed in combination with Without App.Document optn ( HRHAP00_DOCUMENT 279 )
No further participants allowed in combination with Without App.Document ( HRHAP00_DOCUMENT 280 )
Only validity period is allowed in combin. with the Without Doc. option ( HRHAP00_DOCUMENT 281 )
At least one appraiser or appraisee must exist ( HRHAP00_DOCUMENT 282 )
To-Do list function is not supported by the chosen template ( HRHAP00_DOCUMENT 283 )
No self-appraisal allowed ( HRHAP00_DOCUMENT 305 )
Maximum of &1 part appraisers allowed for template ( HRHAP00_DOCUMENT 309 )
Only one appraisal document allowed ( HRHAP00_DOCUMENT 310 )
Part appraisal(s) still being processed ( HRHAP00_DOCUMENT 315 )
Previous part appraisals not yet complete ( HRHAP00_DOCUMENT 316 )
Part appraisal does not exist; appraisal has status 'In Preparation' ( HRHAP00_DOCUMENT 318 )
Appraiser &1 '&2' not allowed ( HRHAP00_DOCUMENT 320 )
Appraisee &1 '&2' not allowed ( HRHAP00_DOCUMENT 321 )
You are not registered to perform anonymous appraisals ( HRHAP00_DOCUMENT 322 )
Error occurred during follow-up processing ( HRHAP00_DOCUMENT 325 )
Mandatory part appraisal(s) in process ( HRHAP00_DOCUMENT 336 )
Further participant &1 '&2' not allowed ( HRHAP00_DOCUMENT 337 )
Your registration for this appraisal has already been completed ( HRHAP00_DOCUMENT 339 )
Appraisal doc. structure differs from reference appraisal doc. structure ( HRHAP00_DOCUMENT 400 )
Appraisal document contains more than 20 elements; download not possible ( HRHAP00_DOCUMENT 401 )
Status &1 is not allowed, appraisal document reset canceled ( HRHAP00_DOCUMENT 402 )
Reset status: the new status must be before the old status ( HRHAP00_DOCUMENT 403 )
Status reset is not allowed ( HRHAP00_DOCUMENT 405 )
Ranking list is not possible for part appraisals ( HRHAP00_DOCUMENT 407 )
Part appraisal and appraisal are used together ( HRHAP00_DOCUMENT 411 )
Appraisal for employee &1 could not be prepared ( HRHAP00_DOCUMENT 769 )
Incorrect object types ( HRHAP00_DOC_PA 001 )
Value determination (&1) is not possible ( HRHAP00_DOC_PA 003 )
Value determination (&1) is not possible ( HRHAP00_DOC_PA 004 )
No valid appraisal document found ( HRHAP00_DOC_PA 007 )
Mandatory note if value too low ('&1') ( HRHAP00_DOC_PA 023 )
No valid appraisal process available ( HRHAP00_PMP_PROCESS 024 )
Template has already been used; you cannot use it anymore ( HRHAP00_PMP_PROCESS 090 )
System could not find any informatin to copy ( HRHAP00_PMP_PROCESS 092 )
Appraisal documents already exist for this process ( HRHAP00_PMP_PROCESS 093 )
Appraisal document could not be updated for &1 ( HRHAP00_PMP_PROCESS 152 )
An unexpected technical error has occurred ( HRHAP00_TEMPLATE 000 )
&1 '&2' was not deleted ( HRHAP00_TEMPLATE 010 )
Settings only take effect when the function is restarted ( HRHAP00_TEMPLATE 011 )
No template found ( HRHAP00_TEMPLATE 013 )
Web service is not activated ( HRHAP00_TEMPLATE 015 )
Choose a valid element ( HRHAP00_TEMPLATE 019 )
Element not copied ( HRHAP00_TEMPLATE 022 )
Template structure adjusted ( HRHAP00_TEMPLATE 023 )
The file is damaged ( HRHAP00_TEMPLATE 033 )
Sort not possible ( HRHAP00_TEMPLATE 062 )
Sorting is inconsistent ( HRHAP00_TEMPLATE 063 )
Status '&1' has to be set to complete appraisal ( HRHAP00_TEMPLATE 065 )
No category group found ( HRHAP00_TEMPLATE 097 )
Column owner '&1' not allowed for '&2' ( HRHAP00_TEMPLATE 114 )
Numbering type '&1' is not defined ( HRHAP00_TEMPLATE 120 )
Numbering error ( HRHAP00_TEMPLATE 124 )
Value determination '&1' is not allowed for non-numeric value list '&2' ( HRHAP00_TEMPLATE 156 )
Value determination '&1' is not possible without a note ( HRHAP00_TEMPLATE 157 )
Value determination '&1' is not possible without an appraisee ( HRHAP00_TEMPLATE 158 )
Value determination '&1' is not possible with more than one appraisee ( HRHAP00_TEMPLATE 159 )
Value determination '&1' is not possible for elements other than '&2' ( HRHAP00_TEMPLATE 160 )
Value determination '&1' in column '&2' is only possible with value list ( HRHAP00_TEMPLATE 161 )
Value determination '&1' without dependent elements is of limited use ( HRHAP00_TEMPLATE 163 )
Columns '&2' and '&3' must have the same value list ( HRHAP00_TEMPLATE 166 )
Chosen scale for column '&4' is not permitted ( HRHAP00_TEMPLATE 167 )
Desription is not maintained consistently in all required languages ( HRHAP00_TEMPLATE 168 )
Qualifications profile cannot be displayed without an appraisee ( HRHAP00_TEMPLATE 170 )
Column order is incorrect ( HRHAP00_TEMPLATE 206 )
You can only select column '&1' with the 'Final Appraisal' column ( HRHAP00_TEMPLATE 207 )
Element '&1' is already being used in an appraisal document ( HRHAP00_TEMPLATE 219 )
Element '&1' has the wrong column assignment ( HRHAP00_TEMPLATE 226 )
You cannot delete object types ( HRHAP00_TEMPLATE 331 )
You cannot delete decision maker '&1' ( HRHAP00_TEMPLATE 332 )
Only select column OBJ1 with column OBJL ( HRHAP00_TEMPLATE 351 )
Only select column OBJL with column OBJH ( HRHAP00_TEMPLATE 352 )
Only select column PAPP with column PWGT ( HRHAP00_TEMPLATE 353 )
Only select column FAPP with column FWGT ( HRHAP00_TEMPLATE 354 )
The 'Next State' indicator can only be set for goal status '&1' ( HRHAP00_TEMPLATE 369 )
Status '&1' is required ( HRHAP00_TEMPLATE 372 )
Status 'In Review' is inconsistent with setting 'No Review' ( HRHAP00_TEMPLATE 374 )
Appraisal document can never be closed ( HRHAP00_TEMPLATE 375 )
Status change from '&1' to '&2' not allowed ( HRHAP00_TEMPLATE 376 )
Indicator 'Next State' must be set for pushbutton '&1' ( HRHAP00_TEMPLATE 377 )
Indicator 'Next State' must be set for status '&1' ( HRHAP00_TEMPLATE 378 )
&1 cannot be set to optional ( HRHAP00_TEMPLATE 402 )
The 'Next State' indicator must be set for status 'In Preparation' ( HRHAP00_TEMPLATE 405 )
'&1' may not be set to optional entry ( HRHAP00_TEMPLATE 411 )
'&1' is an invalid entry option ( HRHAP00_TEMPLATE 412 )
Cannot delete element ( HRHAP00_TEMPLATE 501 )
Appraisal document cannot be enhanced ( HRHAP00_TEMPLATE 503 )
You cannot change the status from '&1' to '&2' ( HRHAP00_TEMPLATE 504 )
Prerequisite &1 is not activated for changing from status &2 to &3 ( HRHAP00_TEMPLATE 508 )
Appraisal template &1 is not fully supported ( HRHAP00_TEMPLATE 615 )
Employee &1 is still entered as appraiser ( HRHAP_ARCHIVE 100 )
Employee &1 is still entered as appraisee ( HRHAP_ARCHIVE 101 )
Employe &1 is still entered as part appraiser ( HRHAP_ARCHIVE 102 )
Employee &1 is still entered as additional appraiser ( HRHAP_ARCHIVE 103 )
Only a single value is allowed for selection criterion & ( HRHCP00_BW 001 )
Only single values and intervals are allowed for selection criterion & ( HRHCP00_BW 002 )
Choose an existing data collection method ( HRHCP00_COLLECTION 001 )
Cannot read the "Planned Compensation" infotype (1005) ( HRHCP00_COLLECTION 002 )
Enter the start and end date of the data selection period ( HRHCP00_COLLECTION 004 )
You cannot enter additional parameters ( HRHCP00_COLLECTION 006 )
Enter the mandatory parameter &2 for the interface &1 ( HRHCP00_COLLECTION 007 )
Error while reading infotype &1 ( HRHCP00_COLLECTION 008 )
The data selection query (&1) has not been executed ( HRHCP00_COLLECTION 010 )
Error in indirect valuation for infotype &1 ( HRHCP00_COLLECTION 012 )
Valuation for infotype "Planned Compensation" (1005) not executed ( HRHCP00_COLLECTION 013 )
Working time data not determined for object ( HRHCP00_COLLECTION 014 )
End date of data record is earlier than start date ( HRHCP00_COLLECTION 015 )
End date of data selection period is earlier than start date ( HRHCP00_COLLECTION 016 )
End date of data collection period is earlier than begin date ( HRHCP00_COLLECTION 017 )
Valid to date for cost planning object is earlier than valid from date ( HRHCP00_COLLECTION 018 )
Data collection was not performed for a data collection method ( HRHCP00_COLLECTION 019 )
Internal error in data collection; data record not found ( HRHCP00_COLLECTION 020 )
Internal error in data collection; no periods can be determined ( HRHCP00_COLLECTION 021 )
Error in currency translation ( HRHCP00_COLLECTION 022 )
Translation error for amounts between periods ( HRHCP00_COLLECTION 023 )
Error determinung periods for infotype "Basic Pay" ( HRHCP00_COLLECTION 024 )
Data collection for employees only allows object type "P" ( HRHCP00_COLLECTION 025 )
Error in period conversion ( HRHCP00_COLLECTION 026 )
Expected parameter &1 not transferred to data collection method &2 ( HRHCP00_COLLECTION 027 )
No entry in control table for supplying of organizational objects ( HRHCP00_COLLECTION 028 )
Error reading alternative account assignment for infotype &1 ( HRHCP00_COLLECTION 029 )
Error determining employee's organizational data ( HRHCP00_COLLECTION 033 )
Missing cost data for collection of costs for organizational objects ( HRHCP00_COLLECTION 034 )
No organizational assignment found for &1 ( HRHCP00_COLLECTION 035 )
Incorrect object type for collecting data from vacant positions ( HRHCP00_COLLECTION 036 )
No cost data found when collecting data for vacant positions ( HRHCP00_COLLECTION 038 )
Error when summarizing overlapping periods ( HRHCP00_COLLECTION 040 )
Error reading infotype Plannning of Personnel Costs (0666) ( HRHCP00_COLLECTION 041 )
Error when delimiting overlapping infotype periods (IT 0666) ( HRHCP00_COLLECTION 042 )
Error whilst writing newly created infotype records (IT 0666) ( HRHCP00_COLLECTION 043 )
Enter a data collection period ( HRHCP00_COLLECTION 044 )
Personnel number &1 does not exist in the quantity of selected objects ( HRHCP00_COLLECTION 046 )
Incorrect data collector registered in data records ( HRHCP00_COLLECTION 047 )
No cost data could be determined using method &3 ( HRHCP00_COLLECTION 064 )
Data status "all" and no staus overlap not permitted ( HRHCP00_COLLECTION 067 )
Error reading relationship &1 between position and employee ( HRHCP00_COLLECTION 070 )
Error reading relationship &1 between position and job ( HRHCP00_COLLECTION 071 )
Error reading relationship &1 between employee and position ( HRHCP00_COLLECTION 072 )
Error reading relationship &1 between organizational unit and position ( HRHCP00_COLLECTION 073 )
No read authorization for infotype &1 ( HRHCP00_COLLECTION 075 )
Error reading infotype Plannning of Personnel Costs (0666) ( HRHCP00_COLLECTION 076 )
Unit &1 is not a time unit; unit will be deleted ( HRHCP00_COLLECTION 077 )
Data selection period is not the same as data collection period ( HRHCP00_COLLECTION 078 )
Combination of time units &1 -> &2 cannot be processed ( HRHCP00_COLLECTION 079 )
No data basis from payroll found for employee &1 ( HRHCP00_COLLECTION 082 )
Error whilst creating background job ( HRHCP00_COLLECTION 085 )
Error whilst closing background job ( HRHCP00_COLLECTION 086 )
Manual adjustments for personnel number &1 are not overwritten ( HRHCP00_COLLECTION 092 )
Error whilst finding structure in data collection method &1 ( HRHCP00_COLLECTION 093 )
Time unit for non-cumulative values not permitted ( HRHCP00_COLLECTION 094 )
External call of data collection report with incorrect parameters ( HRHCP00_COLLECTION 099 )
Data collection without object lock not possible ( HRHCP00_COLLECTION 100 )
Data collection without object lock; cost object &1 &2 is not locked ( HRHCP00_COLLECTION 101 )
Object &1 is fixed. Changes to the database cannot be carried out. ( HRHCP00_COLLECTION 109 )
Properties of semiretirement work phase cannot be determined ( HRHCP00_COLLECTION 113 )
Supplemnt percentage rate for semiretirement model cannot be determined ( HRHCP00_COLLECTION 114 )
No statistical key figures are assigned to cost item &1 ( HRHCP00_CUSTOMIZING 002 )
The symbolic account assignment for cost item type 2 is not allowed ( HRHCP00_CUSTOMIZING 003 )
Assign a symbolic account to the cost item ( HRHCP00_CUSTOMIZING 004 )
Symbolic account &1 is already assigned to cost item &2 ( HRHCP00_CUSTOMIZING 005 )
The statistical key figure assignment is not permissible ( HRHCP00_CUSTOMIZING 006 )
There is no valuation entry in Customizing for the key &1 ( HRHCP00_CUSTOMIZING 015 )
There are no limits in Customizing for the key &1 ( HRHCP00_CUSTOMIZING 016 )
Enter at least one month as a base ( HRHCP00_CUSTOMIZING 017 )
Enter at least one month for creating the cost item ( HRHCP00_CUSTOMIZING 018 )
Enter at least one month for creating the cost item ( HRHCP00_CUSTOMIZING 019 )
Enter a currency for the amount field ( HRHCP00_CUSTOMIZING 020 )
In the customer namespace the interface group "M" is not permissible ( HRHCP00_CUSTOMIZING 021 )
Symbolic account &1 does not have type '&2' ( HRHCP00_CUSTOMIZING 024 )
Cost item &1 is not assigned to any wage type via symbolic account &2 ( HRHCP00_CUSTOMIZING 025 )
You cannot assign cost item &1 of type &2 to a symbolic account ( HRHCP00_CUSTOMIZING 026 )
Cannot determine a G/L account for the search key &1 HRC &2 &3 &4 ( HRHCP00_CUSTOMIZING 029 )
Cost element &1 in controlling area &2 does not exist ( HRHCP00_CUSTOMIZING 030 )
Employee grouping for account determination does not exist ( HRHCP00_CUSTOMIZING 031 )
&1: No error ( HRHCP00_CUSTOMIZING 032 )
Cost item &1 is not assigned to a statistical key figure from &2 to &3 ( HRHCP00_CUSTOMIZING 033 )
Cost item &2 has the cost item type &1, which is not permitted ( HRHCP00_CUSTOMIZING 034 )
Cost item &1 in planning context &2 is derived recursively ( HRHCP00_CUSTOMIZING 036 )
Cost item &1 in scenario &3 has not been valuated ( HRHCP00_CUSTOMIZING 037 )
Valuation using percentage is only possible for dependent cost items ( HRHCP00_CUSTOMIZING 040 )
Valuation using an absolute amount is only possible for add. cost items ( HRHCP00_CUSTOMIZING 041 )
You have no authorization to perform the action (authorization obj. &1) ( HRHCP00_PLAN 004 )
Cannot delete cost planning run &1: incorrect status ( HRHCP00_PLAN 005 )
Select a cost plan ( HRHCP00_PLAN 007 )
You are not authorized to determine cost distribution for pers. no. &1 ( HRHCP00_PLAN 011 )
Error while determining cost distribution for personnel number &1 ( HRHCP00_PLAN 012 )
You are not authorized to determine compensation info. for pers. no. &1 ( HRHCP00_PLAN 013 )
Enter the data basis for evaluating the employee data ( HRHCP00_PLAN 021 )
Invalid definition of dependent cost items ( HRHCP00_PLAN 022 )
Could not find attributes for plan &2 in plan version &1 ( HRHCP00_PLAN 023 )
Changing and deleting is only possible for plans without planning runs ( HRHCP00_PLAN 024 )
Internal Error: Cannot determine org. grouping for object &1 (&2) ( HRHCP00_PLAN 030 )
No evaluation possible for organizational grouping &4 (object &1) ( HRHCP00_PLAN 031 )
Select data from one plan only for display ( HRHCP00_PLAN 036 )
Selection for plan versions is not supported ( HRHCP00_PLAN 037 )
Select at least one cost planning run ( HRHCP00_PLAN 040 )
You can only release planning runs with the status "plan data generated" ( HRHCP00_PLAN 041 )
It is not possible to create an original document for runs with status &1 ( HRHCP00_PLAN 042 )
Assign cost item &1 to a cost element ( HRHCP00_PLAN 044 )
Assign the cost item to a statistical key figure ( HRHCP00_PLAN 045 )
Error while creating document in planning run &1 ( HRHCP00_PLAN 046 )
Cannot determine cost element for search key &1 HRC &2 &3 &4 ( HRHCP00_PLAN 047 )
Error while determining country grouping for personnel number &1 ( HRHCP00_PLAN 048 )
Organizational unit &1 has no direct cost center assignment ( HRHCP00_PLAN 053 )
Date table was not created ( HRHCP00_PLAN 054 )
Error while reading planning results from cluster PCL5 ( HRHCP00_PLAN 055 )
Error while checking format ( HRHCP00_PLAN 056 )
Internal error: planning run does not contain entry for object &1 &2 ( HRHCP00_PLAN 057 )
The Web browser for detail planning was not started ( HRHCP00_PLAN 058 )
Database error while reading job texts ( HRHCP00_PLAN 059 )
It is not possible to update the original document for runs in status &2 ( HRHCP00_PLAN 061 )
The icon entered for object type &1 does not exist ( HRHCP00_PLAN 066 )
Error message was not assigned to a line item ( HRHCP00_PLAN 068 )
Error occurred during posting ( HRHCP00_PLAN 069 )
Error while saving planning data to the cluster ( HRHCP00_PLAN 070 )
Error in evaluation path for org. units in area of responsibility ( HRHCP00_PLAN 073 )
Error while converting documents: cannot assign period &1 to amount field ( HRHCP00_PLAN 074 )
Error when converting documents: cannot assign period &1 to number field ( HRHCP00_PLAN 075 )
Plan &1 is not released for Accounting ( HRHCP00_PLAN 084 )
The program cannot be executed ( HRHCP00_PLAN 088 )
Program was not executed ( HRHCP00_PLAN 090 )
Error in BAdI implementation; no period for start date of plan ( HRHCP00_PLAN 091 )
Error in BAdI implementation; no period for end date of plan ( HRHCP00_PLAN 092 )
Error in BAdI implementation; periods have gaps ( HRHCP00_PLAN 093 )
Error in BAdI implementation; periods overlap ( HRHCP00_PLAN 094 )
Error in BAdI implementation; cost item period is invalid ( HRHCP00_PLAN 095 )
Error in BAdI impl.; incorrect assignment to alternative account assgmt ( HRHCP00_PLAN 096 )
Error in BAdI implementation; invalid period ( HRHCP00_PLAN 097 )
Error in BAdI implementation; employee not permissible for method ( HRHCP00_PLAN 098 )
Error in BAdI implementation; objects have incorrect object type ( HRHCP00_PLAN 099 )
No authorization for performing the action ( HRHCP00_PLAN 102 )
Cannot determine real (non-statistical) account assignment object ( HRHCP00_PLAN 103 )
Organizational unit &1 is planned twice ( HRHCP00_PLAN 104 )
No account assignment could be determined for organizational units ( HRHCP00_PLAN 106 )
No cost data exists for the object &3 (&4) ( HRHCP00_PLAN 108 )
Alternative account assignment &1 does not exist ( HRHCP00_PLAN 110 )
No cost assignment available for period &1 - &2 ( HRHCP00_PLAN 111 )
No 100% cost assignment for period &1 - &2 ( HRHCP00_PLAN 112 )
It is not possible to reset the release; run &1 already transferred ( HRHCP00_PLAN 113 )
Cannot read the "Planned Compensation" infotype (1005) ( HRHCP00_PLAN 117 )
Cost item changed manually found; no derivation or valuation ( HRHCP00_PLAN 124 )
Copy function only possible for plans in organizational view ( HRHCP00_PLAN 126 )
No organizational unit could be determined for derivation ( HRHCP00_PLAN 129 )
No data exists in target plan for cost unit &1 &2 &3 ( HRHCP00_PLAN 132 )
Target plan contains detail planning changes for cost unit &1 &2 &3 ( HRHCP00_PLAN 133 )
Original pay scale group/level not identical in source and target plan ( HRHCP00_PLAN 134 )
Source plan contains detail planning changes without event assignment ( HRHCP00_PLAN 135 )
Source plan contains detail planning changes that cannot be copied ( HRHCP00_PLAN 136 )
Not possible to change capacity utilization level in target plan ( HRHCP00_PLAN 137 )
Cannot be deleted. Original document contains posted document lines ( HRHCP00_PLAN 138 )
Status overlap must be set ( HRHCP00_PLAN 140 )
Check the application log ( HRHCP00_PLAN 142 )
Organizational reassignment not possible in target plan ( HRHCP00_PLAN 146 )
No amount/number of base cost item &2 for object &1 ( HRHCP00_PLAN 147 )
No amount/number of base cost item &2 (current year) for object &1 ( HRHCP00_PLAN 148 )
&1. Restriction to cost unit not taken into account ( HRHCP00_PLAN 150 )
Source plan &1 &2. Copying with detail plan changes not possible ( HRHCP00_PLAN 151 )
Cannot extend assignment and costs in target plan ( HRHCP00_PLAN 154 )
Start the detail plan in the Portal or NWBC. (See long text) ( HRHCP00_PLAN 200 )
Cancel "&1": &2 of &3 events could not be canceled ( HRHCP00_PLAN 201 )
Activate the business function HCM_HCP_CI_1 ( HRHCP00_PLAN 205 )
Customizing is incomplete for unit of measurement &1 (&2) in table T538A ( HRHCP00_PLAN 206 )
Enter the plan version together with a pers. cost plan/selection date ( HRHCP_PLAN_ARC 019 )
Change pointer for &1 &2 cannot be inserted ( HRICP_CH_PTR 002 )
Infotypes to be tracked are not maintained for consumer &1 ( HRICP_CH_PTR 003 )
No consumer found ( HRICP_CH_PTR 004 )
Timestamp of consumer &1 could not be adjusted ( HRICP_CH_PTR 005 )
Consumer &1 could not be found ( HRICP_CH_PTR 006 )
Not authorized to change table &1 ( HRICP_CH_PTR 009 )
An error occured while generating the report program for query &1 ( HRIDMWIZ 029 )
This period is not permitted for the infotype. ( HRITFAT 001 )
The data relating to the maintenance beneficiary is incomplete. ( HRITFAT 051 )
No data found for family member & &. ( HRITFAT 052 )
Invalid value for insurance grouping "&1" ( HRITFCH 001 )
Internal personnel subarea "&1" is not permitted for UVG grouping "&2" ( HRITFCH 002 )
Check mode could not be determined for the AHV number ( HRITFCH 003 )
Unable to read infotype &1 for key date &2 ( HRITFCH 004 )
No address exists in table T536A for creation rule "&2" ( HRITFCH 007 )
Attribute class &1 according to T5CAS not compatible with field no. &3 ( HRITFCH 501 )
No EE attribute class defined for field &3 ( HRITFCH 502 )
EE attribute &1 not defined in class &2 for date &3 ( HRITFCH 503 )
Attribute class not specified for field no. &3 ( HRITFCH 504 )
No employee attribute class specified for EE attribute &1 ( HRITFCH 505 )
Length of Personal Id is incorrect ( HRITFCN_0185 001 )
Application status is incorrect ( HRITFCN_0185 002 )
Personal Areas/Subarea &1 / &2 is not defined in table T7CN0P ( HRITFCN_0531 001 )
Input tax area &1 is different from the default value &2 ( HRITFCN_0531 002 )
Team &1 not available (completely) in period from &2 to &3 ( HRITFDECI 000 )
Team &1 does not have a workplace assignment in the period from &2 to &3 ( HRITFDECI 001 )
Model for flexible working time &1 not (completely) available ( HRITFDECI 002 )
Partners of work cooperative &1 are not (completely) available ( HRITFDECI 003 )
Cannot create team substitution &1, subtype &2 from &3 to &4 ( HRITFDECI 007 )
Invalid entry for wage type &1 ( HRITFDECI 104 )
Error deleting the corresponding infotype &1, subtype &2, date &3 ( HRITFDECI 205 )
Corresponding time infotype &1, subtype &2 does not exist ( HRITFDECI 206 )
Selected interest calculation type does not fit with interest type ( HRITFDEPF 002 )
Enter only the amount for seizability '&1' ( HRITFDEPF 010 )
The selected seizabilities must not be mixed ( HRITFDEPF 011 )
Do not enter either an amount or percentage for seizability &1 ( HRITFDEPF 012 )
Enter only the percentage for seizability &1 ( HRITFDEPF 013 )
Infotype &1 cannot be created without infotype 0111 data ( HRITFDEPF 020 )
BDA suggestion not possible due to missing date of birth ( HRITFDEPS 000 )
Digits with empty spaces are not permitted in the employer number ( HRITFDEPSVADM 001 )
Calculation type &1 does not permit entry for "Pens. Percentage Sec. 53a" ( HRITFDEPSVADM 002 )
Calculation type &1 does not permit entry for "Reduced Age Pay Scale" ( HRITFDEPSVADM 003 )
Value in 'Other Special Paymt' although 'Specify Manually' not selected ( HRITFDEPSVADM 004 )
'W/o Adjustment Factors' checkbox only if 'PerNo. Int. System' is initial ( HRITFDEPSVADM 005 )
Start and end dates are not the same ( HRITFDEPSVADM 006 )
Dates in 'Effective From' and 'Eff. From' must be identical ( HRITFDEPSVADM 007 )
'Eff. from' date must be specified for this type of court hearing ( HRITFDEPSVADM 008 )
No entry is permitted for individual increase &1 ( HRITFDEPSVADM 009 )
No entry is permitted for individual increase 1990 ( HRITFDEPSVADM 010 )
Entry in 'Reason' field although 'Reduction Suspended' is not selected ( HRITFDEPSVADM 011 )
'Temporary Granting' selected but 'Pension-Rel. Period' is not selected ( HRITFDEPSVADM 012 )
Entry in 'Income Thresh.' field only permitted for type 02 (care period) ( HRITFDEPSVADM 013 )
'Key Date' field contains an invalid date ( HRITFDEPSVADM 014 )
Entries for 'Income Thresh.' are permitted only for types PZ and KPZ ( HRITFDEPSVADM 015 )
Entry in 'No.Childr.' is permitted for type KEEZ only ( HRITFDEPSVADM 016 )
No further entries are permitted for legal basis 99 ( HRITFDEPSVADM 017 )
Reference number (REFNR) is already assigned ( HRITFDEPSVADM 018 )
Reference number (REFNR) has the value '00' ( HRITFDEPSVADM 019 )
Percentage 'Manual' is not permitted without a reimbursement reason ( HRITFDEPSVADM 020 )
Specified OBJPS is already used ( HRITFDEPSVADM 021 )
There is no corresponding infotype 0845 record for this OBJPS ( HRITFDEPSVADM 022 )
Corresponding infotype 0845 record has legal basis '99' ( HRITFDEPSVADM 023 )
Infotype 0845 records with legal basis '02' are assigned more than once ( HRITFDEPSVADM 024 )
Value in field 'Provider Reimbursement' is not permitted ( HRITFDEPSVADM 025 )
Percentage 'Automatic' is not permitted without a reimbursement reason ( HRITFDEPSVADM 026 )
Enter an amount in the 'Income Thresh.' field ( HRITFDEPSVADM 027 )
Enter the currency in the 'Income Thresh.' field ( HRITFDEPSVADM 028 )
Maximum rate of 75 percent no longer permitted after Eighth Adjustment ( HRITFDEPSVADM 029 )
The name &1 exists more than once in Business Address Services ( HRITFDEPSVADM_UI 001 )
New contract model: All modules were deleted ( HRITFDEST 010 )
Employee is insured in the miners'/mine-workers' fund from & to & ( HRITFDESV 002 )
Employee is not insured in the miners'/mine-workers' fund from & to & ( HRITFDESV 003 )
Branch office &1 of health insurance fund &2 is not allowed ( HRITFDESV 004 )
Health insurance fund &1 is not allowed ( HRITFDESV 005 )
Employee will become insured in miners'/mine-workers fund from & ( HRITFDESV 006 )
Employee is insured in miners'/mine-workers fund up to & ( HRITFDESV 007 )
Contribution scale &1 of health insurance fund &2 is not allowed ( HRITFDESV 008 )
No amounts maintained in the scale table for health insurance fund &1 ( HRITFDESV 010 )
Enter the contribution scale ( HRITFDESV 011 )
Contribution rates not available for health insurance fund &1 ( HRITFDESV 012 )
Feature DDU03 returns an invalid return value ( HRITFDESV 013 )
Create infotype 0126 with subtype &1 first ( HRITFDESV 014 )
Institution &2 is not allowed ( HRITFDESV 015 )
Special rule &2 is not allowed ( HRITFDESV 016 )
Contribution for contribution scale &2 is not available ( HRITFDESV 017 )
Workers' compensation association &1 is not allowed ( HRITFDESV 018 )
Hazard pay area &1 of workers' compensation association &2 is not allowed ( HRITFDESV 019 )
Infotype 13 is not available in period & - & ( HRITFDESV 022 )
Professional status & contradicts HI indicator & ( HRITFDESV 023 )
Professional status & contradicts PI indicator & ( HRITFDESV 024 )
Professional status & contradicts UI indicator & ( HRITFDESV 025 )
Employee group & contradicts professional status & or SI key & ( HRITFDESV 026 )
Employee group key & contradicts SI attribute & ( HRITFDESV 027 )
Employee group key & contradicts occupational code & ( HRITFDESV 028 )
Employee group key & contradicts training key & ( HRITFDESV 029 )
Delete the entry in the "DEUEV Lock" field ( HRITFDESV 030 )
Enter the federal miners' and mine-employees' insurance as HI fund ( HRITFDESV 031 )
Do not enter a health insurance fund ( HRITFDESV 032 )
You must enter the SI data completely before you enter the DEUEV data ( HRITFDESV 033 )
Contribution personnel area &1/subarea &2 incomplete ( HRITFDESV 034 )
There are gaps existing between the repetitive blocks. ( HRITFIN 011 )
Dedn.Int.Start A/c month or/and Dedn.Int.End A/c month are not valid. ( HRITFIN 012 )
Section 24 Deduction Interest Limit constant is not valid. ( HRITFIN 013 )
There are duplicate field entries existing in the repetitive block. ( HRITFIN 014 )
Educational establishment has been changed. Please check institute code. ( HRITFJP_0022 002 )
The pattern you entered is invalid. ( HRITFJP_0140 000 )
The combination of Social Ins. Deduction and Acquired/lost is invalid. ( HRITFJP_0140 001 )
Check SI exemption modifier. ( HRITFJP_0140 002 )
Pension number is not used for subtype &. ( HRITFJP_0140 003 )
Combination of taxation information indicators is inappropriate. ( HRITFJP_0145 002 )
There is no corresponding spouse data in infotype 0021. ( HRITFJP_0146 002 )
Specify the begin date for the credit. ( HRITFJP_0146 004 )
Begin date must be before the end date of "1stPayYear / Period", &1. ( HRITFJP_0559 003 )
Number of weekly working hours (&2) exceeded. ( HRITFMX 010 )
Invalid Income Tax No. - Tax Prefix must contain one or two alphabets ( HRITFMY 010 )
Enter name of Related Person completely ( HRITFMY 019 )
Enter name of City ( HRITFMY 020 )
Record already processed in payroll run ( HRITFNA_0221 001 )
Attribute Class &1 According to T5CAS not Compatible with Field No. &3 ( HRITFPFXX 001 )
No EE Attribute Class Defined for Field &3 ( HRITFPFXX 002 )
EE Attribute &1 not Defined in Class &2 for Date &3 ( HRITFPFXX 003 )
Attribute Class not Specified for Field No. &3 ( HRITFPFXX 004 )
No Employee Attribute Class Specified for EE Attribute &1 ( HRITFPFXX 005 )
Mismatch between Dependant Info and Tax Status in Infotype "Taxation". ( HRITFPH 008 )
Mismatch between Tax Status and Dependant Information. ( HRITFPH 009 )
Employee cannot have Qualified Dependent Children ( HRITFPH 010 )
Relationship text is not allowed! ( HRITFPH 011 )
Invalid Type of Dependant for BIR 2316 ( HRITFPH 012 )
The 'Income tax borne by employer' field should be marked ( HRITFSG 021 )
You have entered 'Block number' without 'Sty/Unit' ( HRITFSG 037 )
You have entered 'Sty/Unit' without 'Block number' ( HRITFSG 038 )
Must be valid till last day of any Tax year ( HRITFTH 004 )
Obsolete field, must be blank! ( HRITFTH 006 )
Error while getting valid Currency key ( HRITFTH 008 )
No Input Allowed in this field for Thailand! ( HRITFTH 009 )
Records for Sequence Number can not be changed! ( HRITFTH 016 )
Fill either the USRID or the USRID_LONG field ( HRITFXX_0105 000 )
The query does not contain the field Personnel Number (P0000-PERNR) ( HRLDAP 003 )
The query mapping is incomplete ( HRLDAP 005 )
The query has not yet been generated ( HRLDAP 006 )
Error when creating data in the LDAP directory ( HRLDAP 021 )
Error when updating the LDAP directory ( HRLDAP 022 )
Enter a valid Home Personnel number ( HRMGE00GENERAL 020 )
Enter a valid Sending Personnel number ( HRMGE00GENERAL 021 )
Create a record for infotype Assignment Details (0710) and Status (0715) ( HRMGE00GENERAL 038 )
Circular reference exists on &1 for the compensation package calculation ( HRMGE00GENERAL 051 )
CPI &1 is not eligible for this assignment ( HRMGE00GENERAL 059 )
Customizing of CPI &1 has changed ( HRMGE00GENERAL 064 )
No global assignment details found in planned or active status ( HRMGE00GENERAL 075 )
Error during calculation of annual salary of the home side: &1 ( HRMGE00GENERAL 092 )
Enter one of the fields Home Pernr or Home Country ( HRMGE00GENERAL 111 )
Enter one of the fields Sending Pernr or Sending Country ( HRMGE00GENERAL 112 )
Merge is impossible ( HRMGE00GENERAL 147 )
Assigment status (infotype 0715) is not: '&1' ( HRMGE00GENERAL 608 )
Some new data were suggested by the system ( HRMGE00GENERAL 619 )
Indirect evaluation module of wage type &1 must be equal to 'EXPAT' ( HRMGE00GENERAL 622 )
Activation date could not be changed for the host personnel no. &1 ( HRMGE00GENERAL 623 )
Wage type(s) &1 suggested from feature LGMST and not by the CPIs ( HRMGE00GENERAL 625 )
All necessary items are not completed ( HRMGE00GENERAL 626 )
Error while formatting form ( HRMGE00GENERAL 702 )
Make sure you have selected a home assignment ( HRMGE00GENERAL 703 )
Items suggested by the system ( HRMGE00GENERAL 751 )
Home subtype for assignment status does not exist for personnel no. &1 ( HRMGE00GENERAL 752 )
No Office template define for this assignment. ( HRMGE00GENERAL 814 )
Some candidates cannot be processed due to bgRFC error (Unit ID: &1) ( HRMP_UI_MSG 025 )
Employees without e-mail ID do not receive reminders: contact admin. ( HRMSS_CATS_APPR_WDA 019 )
Buffer not updated for the managers ( HRMSS_OADP 010 )
Error in program &2, line &3; contact administrator ( HRMSS_WDA 002 )
You currently have no active substitutions ( HRMSS_WDA 016 )
No Personnel Number assigned to &1 ( HRMSS_WDA 017 )
The application cannot be started because the person ID is missing ( HRMSS_WDA 019 )
Substitution rule with type Fill In not created for Travel management ( HRMSS_WDA 024 )
No email maintained for &1.Notification not sent ( HRMSS_WDA 026 )
The new object name could not be saved. ( HRNQFZA 002 )
This will create a Unit Standard - for a Qualification use INSERT. ( HRNQFZA 010 )
You cannot create any object within an outcome. ( HRNQFZA 011 )
Object &1 does not carry the necessary NQF attributes. ( HRNQFZA 012 )
Error during object deletion. ( HRNQFZA 016 )
&1 id is already being used in table &2 in client &3 ( HRNQFZA 021 )
Table reference unusable (structure '&1' from TABLEREF_AND_INFOS) ( HRPAD00ALV 001 )
Report is stopped due to generation rule not set ( HRPAD00CEGENPERID 001 )
BADI & is not implemented ( HRPAD00CEGENPERID 002 )
Wrong Personid_ext generated by BADI ( HRPAD00CEGENPERID 009 )
Preview is not available for BADI generation ( HRPAD00CEGENPERID 010 )
Table T582G is not correctly maintained for infotype 0709 ( HRPAD00CEGENPERID 012 )
&1 (class &2) selected ( HRPAD00DD 007 )
Personnel number &1: Object is completed from a business perspective (&2) ( HRPAD00DD 008 )
Test run; no data was saved or destroyed ( HRPAD00DD 009 )
Class &1 not intended for processing ( HRPAD00DD 011 )
Naming convention violated (&1); see long text ( HRPAD00DD 027 )
Personnel number &1 locked; see long text ( HRPAD00DD 028 )
Definition of a retroactive accounting limit is required (MOLGA &1) ( HRPAD00DD 033 )
Destruction date was set to &1 due to retroactive account limit. ( HRPAD00DD 034 )
Personnel number &1: Destruction log &2, status &3 already exists ( HRPAD00DD 035 )
Subtype &1 for infotype 0283 is not defined (completely) ( HRPAD00DD 037 )
Archiving subobject &1 is not defined ( HRPAD00DD 038 )
Personnel number &1: Destruction log AO &2 subobject &3 created ( HRPAD00DD 039 )
Personnel number &1: Destruction lock exists, no destruction ( HRPAD00DD 042 )
Personnel number &1: IT 0283 (&2 &3) contradicts destruction date &4 ( HRPAD00DD 043 )
Evaluation for &1 not possible due to destruction log &2 &3 (&4) ( HRPAD00DD 046 )
It is not possible to "interrupt" the write run. ( HRPAD00DD 058 )
Evaluation for &1 not possible due to destruction logs &2 (&3). ( HRPAD00DD 059 )
&1 &2 not generated by this program ( HRPAD00MY42 007 )
Insufficient space available ( HRPAD00MY42 008 )
This program cannot be deleted as it is still active ( HRPAD00MY42 009 )
Error deleting program &1 ( HRPAD00MY42 010 )
Configuration Error in BAdI ( HRPAD00_ERD 001 )
The input help for the "Reason" field has been adjusted. ( HRPAD00_ERD 007 )
No reasons exist for country grouping &1 for personnel no. &2. ( HRPAD00_ERD 008 )
Deactivate "Print Immediately" in the following dialog box. ( HRPAD00_ERD 010 )
An output area must be predefined before data is selected. ( HRPAD00_ERD 015 )
Enter at least one position assignment. ( HRPAD00_ORGINTEG 001 )
Line operation cannot be executed. ( HRPAD00_ORGINTEG 002 )
At least 2 entries were made. Please correct this. ( HRPAD00_ORGINTEG 004 )
The organization unit does not exist in the complete period ( HRPAD00_ORGINTEG 006 )
Mandate &1 is not valid on the change date ( HRPAD00_SEPA_MANDATE 011 )
A newer version of mandate &1 exists ( HRPAD00_SEPA_MANDATE 014 )
New destruction solution using archiving object HRTIM_ABS exists ( HRPAD99ILM 134 )
Test data container &1 does not contain any active variants ( HRPAD99_ADMIN 005 )
No entry in table T510_PSRCL for pay scale &1, &2, &3 on &4 ( HRPAD99_ADMIN 006 )
Invalid Emirates ID number entered; see long text ( HRPADAE 016 )
No family member for family allowances ( HRPADARINFOTYPES 001 )
More than one Family infotype subtype ( HRPADARINFOTYPES 002 )
No Family infotype data between &1 and &2 ( HRPADARINFOTYPES 003 )
No Family infotype &3 between dates &1 and &2 ( HRPADARINFOTYPES 004 )
You do not have authorization to view Family infotype data ( HRPADARINFOTYPES 005 )
There is no data for the subtype requested ( HRPADARINFOTYPES 008 )
CUIT or CUIL &1 erroneous ( HRPADARINFOTYPES 032 )
CUIT or CUIL already exists for other personnel number ( HRPADARINFOTYPES 033 )
Company code &1 is different to Legal person &2 ( HRPADARINFOTYPES 034 )
Welfare fund &1 is not part of any agreement ( HRPADARINFOTYPES 040 )
Dates for absence record overlap with RPI period: & & & & ( HRPADBE_ABSENCES 044 )
Working days between absence end and RPI begin date: & & & & ( HRPADBE_ABSENCES 045 )
No absence found during RPI period: & & & ( HRPADBE_ABSENCES 046 )
Invalid number for Live Birth Certificate ( HRPADBR00 013 )
Invalid number for National Health Card ( HRPADBR00 014 )
Registration number of the eSocial must be different from personnel no. ( HRPADBR00 015 )
Employee &1 has already registration number &2 for the eSocial ( HRPADBR00 016 )
Registration number equals personnel number of other employee ( HRPADBR00 017 )
There are eSocial events already generated for personnel number ( HRPADBR00 019 )
There are eSocial events already generated for current registration ( HRPADBR00 020 )
There are eSocial events already generated for previous registration ( HRPADBR00 021 )
Check the document validity &1. ( HRPADBR00 024 )
The eSocial registration number was already used for that employee. ( HRPADBR00 026 )
Invalid PC ( HRPADBR99 004 )
Invalid city name; maintain table T7BRCITY ( HRPADBR99 006 )
Absence type &1 must be handled by report &2 ( HRPADBR99 016 )
Current date later than quota transfer date. Adjust manually ( HRPADBR99 017 )
Error while reading characteristic &1 ( HRPADBR99 030 )
Subtype &1: Insert other reason or exclude the entry and create a new. ( HRPADBR99 053 )
To change validity of subtype BR01, exclude entry and create a new one. ( HRPADBR99 054 )
Begin date of absence was shifted ( HRPADCASTD 010 )
Absence record cannot be created due to working day definition for STD ( HRPADCASTD 011 )
STD &1 is not defined for this sick pay plan ( HRPADCASTD 016 )
Absence period is longer than &1. STD pay period. ( HRPADCASTD 017 )
This visa is not available any more ( HRPADCN 011 )
Certificate's number is not useful while in processing ( HRPADCN 012 )
No default contribution area exists ( HRPADCN 030 )
Invalid wage type or period ( HRPADCN 038 )
Inconsistent wage type for indicator & ( HRPADCN 039 )
No entry in &1 for &2 ( HRPADCN 080 )
The person does not have such a certificate &1 ( HRPADCN 082 )
Create &1 with corresponding &2 during this period ( HRPADCN 084 )
Enter a &2 value for &1 ( HRPADCN 085 )
&1 and &2 are conflicting ( HRPADCN 086 )
Enter a correct Personal ID number ( HRPADCN 089 )
Going abroad date should be earlier than return date ( HRPADCN 120 )
Enter correct visa number ( HRPADCN 121 )
No valid visa during this period ( HRPADCN 122 )
This visa expired ( HRPADCN 123 )
Sick leave has reached &1M in acc. period &3M, exceeds entitlement &2M ( HRPADCN 130 )
Sick leave with begin date &1 exceeds entitlement &2M in acc. period &3M ( HRPADCN 131 )
Error occurs when creating insurance type &1 for pers. no. &2 ( HRPADCN 133 )
Records for other ins. types created as ins. type &1 for pers. no. &2 ( HRPADCN 134 )
Plan &; employee is not fullfil customer developed requisites ( HRPADCN 166 )
Pension plan &; new status does not match customer settings ( HRPADCN 168 )
Business function HCM_LOC_CI_56 is not activated ( HRPADCN 192 )
No suitable entry exists in T588UICONVCLAS ( HRPADCONVERSION 100 )
Exception: &1&2 ( HRPADCONVERSION 101 )
Text case recording not possible for screen logic ( HRPADCONVERSION 105 )
Multiple MAIN structures defined for infotype &1 in table T588UICONVCLAS ( HRPADCONVERSION 108 )
Some data records are depicted incorrectly in the overview ( HRPADCONVERSION 109 )
No entry exists in table T582ITVCLAS ( HRPADCONVERSION 200 )
Entry exists in table T582ITVCHCK but not in T582ITVCLAS ( HRPADCONVERSION 201 )
No check class specified in table T582ITVCHCK ( HRPADCONVERSION 202 )
No check class specified in table T582ITVCLAS ( HRPADCONVERSION 203 )
No container class (CONT_DB) specified in table T582ITVCLAS ( HRPADCONVERSION 204 )
Check class &2 specified in table T582ITVCLAS does not exist ( HRPADCONVERSION 205 )
Container class CONT_DB &2 specified in table T582ITVCLAS does not exist ( HRPADCONVERSION 206 )
Container class CONT_GUI &2 specified in table T582ITVCLAS does not exist ( HRPADCONVERSION 207 )
Check class &3 specified in table T582ITVCHCK does not exist ( HRPADCONVERSION 208 )
No entry in table T582ITVCHCK; International BL is used ( HRPADCONVERSION 209 )
No conversion class specified in table T588UICONVCLAS ( HRPADCONVERSION 210 )
Conversion class &3 specified in table T588UICONVCLAS does not exist ( HRPADCONVERSION 211 )
No entry for MAIN structure and version 99 in table T588UICONVCLAS ( HRPADCONVERSION 212 )
No version-specific entry specified in table T588UICONVCLAS ( HRPADCONVERSION 213 )
No entry specified for MAIN structure in table T588UICONVCLAS ( HRPADCONVERSION 214 )
More than one entry for MAIN structure (vers. 99) in table T588UICONVCLAS ( HRPADCONVERSION 215 )
Screen structure &3 specified in table T588UICONVCLAS does not exist ( HRPADCONVERSION 216 )
No entry specified for MAIN structure in table T588UICONVCLAS ( HRPADCONVERSION 218 )
Employee does not have reported registration yet or anymore ( HRPADCZ_RPCERGT0 020 )
Measure &1/&2 - &3 received from ISoSS that was not sent ( HRPADCZ_RPCERGT0 021 )
The same employee splitted in the response --> input XML adjustment req. ( HRPADCZ_RPCERGT0 022 )
Program error -> chg document not expanded ( HRPADCZ_RPCERGT0 023 )
XML file in not supported format ( HRPADCZ_RPCERGT0 024 )
XML file of the 'Status' type not supported. Use 'Result' type file. ( HRPADCZ_RPCERGT0 025 )
XML file of the 'Result' type does not match with the original batch. ( HRPADCZ_RPCERGT0 026 )
Confirmation for execution of the service action on the DB item [&1]. ( HRPADCZ_RPCERGT0 027 )
Execution of the service action aborted. ( HRPADCZ_RPCERGT0 028 )
Execution of the service action confirmed. ( HRPADCZ_RPCERGT0 029 )
Retroactive acc. date falls after existing retroactive acc. date &1. ( HRPADDERR 003 )
Retroactive accounting date falls after "Run Payroll Up To" &1 date. ( HRPADDERR 004 )
No further payroll run: &3. Payroll area &2 is already accounted (&1). ( HRPADDERR 005 )
The wage type restriction was not fulfilled. ( HRPADDERR 007 )
Retroactive accounting date requested is changed to entry date &1. ( HRPADDERR 008 )
Retroactive accounting date req. is same as existing retro. acc. date &1. ( HRPADDERR 010 )
Tax ID is identical to tax ID in infotype 0012. ( HRPADDE_IT0118 001 )
Different ID nos have been stored for child no. &1 in IT0118 records. ( HRPADDE_IT0118 002 )
This ID no. has already been stored for child number &1. ( HRPADDE_IT0118 003 )
Error While Simulating the Infotype Operation ( HRPADDE_IT0118 004 )
Unnecessary maintenance of fields for ID. No. Ctrl Proc. Child Allowance ( HRPADDE_IT0118 005 )
The date in the child allowance control procedure is not permitted. ( HRPADDE_IT0118 006 )
The family equalization fund responsible has already handed over dataset. ( HRPADDE_IT0118 007 )
Enter only rate 1, amount 1, rate 2 for tax card type 'P', 'M' 'S'. ( HRPADFI 024 )
Run employee net payment and other payments separately. ( HRPADFI 037 )
Payroll period &2 in year &3 not defined in T549Q for modifier &1. ( HRPADFI 040 )
No age group found in T7FIC0 for car of age &1 valid as of &2. ( HRPADFI 041 )
Could not find period parameter & in table T549R. ( HRPADFI 042 )
No. of channels &1 in template &2 differs from the actual no. &3. ( HRPADFI 049 )
Define trade unions (T7FIT0). ( HRPADFI 060 )
Please enter a valid Personnel Area defined for Finland. ( HRPADFI 065 )
Please enter a valid Personnel Subarea defined for Finland. ( HRPADFI 066 )
Check your entries. Exception is only for Abroad or Source tax cards. ( HRPADFI 071 )
Select a month within the vacation year (ends on &1). ( HRPADFI 100 )
Error caused by date '&1' when evaluating leap year. ( HRPADFI 101 )
Invalid combination of pension company and pension group ( HRPADFI 108 )
Invalid combination of pension company and pension department ( HRPADFI 109 )
No receiver program defined for TemSe object &. ( HRPADFI 120 )
Function upload/download file to front-end not allowed in batch mode. ( HRPADFI 150 )
A file write error occurred. ( HRPADFI 151 )
Some contributions have not been taken into account ( HRPADFR_DUCS 044 )
Please confirm that start of selection period is within year/quarter ( HRPADFR_DUCS 046 )
Check with your OPS that the DUCS paper is still accepted. ( HRPADFR_DUCS 048 )
Change of SIREN without reset to zero of CICE ( HRPADFR_DUCS 049 )
Entered text is shortened as it has more than 90 characters. ( HRPADFR_INFOTYPES 000 )
End date after planned end ( HRPADFR_INFOTYPES 015 )
( HRPADIN01 000 )
Pay scale grpg for allowances for & is not defined on & ( HRPADIN01 084 )
Fiscal year not defined for &1 in Year &2 ( HRPADIN01 088 )
No entries in table & ( HRPADIN01 090 )
Error in finding fiscal period, in period & - & ( HRPADIN01 093 )
Driver perk value not available for the finacial year & - & ( HRPADIN01 106 )
Conveyance amount not available ( HRPADIN01 119 )
No automatic updation for IT0008. Relevant Wagetype not found. ( HRPADIN01 177 )
Disbursement date (&) CANNOT be earlier than the latest payment date (&) ( HRPADIN01 218 )
Eligibility amount for conveyance type & is zero for employee & on &. ( HRPADIN01 223 )
Enter the correct payroll area ( HRPADIN01 224 )
No automatic updation for IT0008. Relevant Wagetype not found. ( HRPADIN01 252 )
Only one record can exist between Jan. 1800 to Dec. 9999 ( HRPADIN01 257 )
Late comp. poss. only if no further 483 records exist ( HRPADIT_DECLARATION 136 )
Tax payer with TN '&1' fr. CC with TN '&2' locked in the table ( HRPADIT_DECLARATION 183 )
The number of instalments entered is too high ( HRPADIT_DECLARATION 278 )
Enter correct add. information for the event &1 of day &2 ( HRPADIT_DECLARATION 294 )
Participant contribution for this plan is not required ( HRPADJP_CP 008 )
Incorrect input; see long text to ensure correct contribution combination ( HRPADJP_CP 009 )
Participant status is not necessary for pre-paid plan ( HRPADJP_CP 015 )
Cannot assign company & as a representative company ( HRPADJP_CP 022 )
Cannot assign company & as an implementing company ( HRPADJP_CP 025 )
Company & does not participate in this retirement benefits plan ( HRPADJP_CP 026 )
Not necessary to set benefit payment period ( HRPADJP_CP 032 )
Cannot select return pension assets for this plan ( HRPADJP_CP 043 )
Calculation reference date is not required ( HRPADJP_CP 051 )
Active Personal type DC plan & exists ( HRPADJP_CP 065 )
You cannot maintain & type plan ( HRPADJP_CP 070 )
You cannot use parameter & for & type plan ( HRPADJP_CP 086 )
& ( HRPADJP_CP 087 )
Plan &; checking seniority requisite is failed ( HRPADJP_CP 113 )
Plan &; checking probation is failed ( HRPADJP_CP 115 )
Plan &; Customizing settings for contibution calculation are not complete ( HRPADJP_CP 118 )
Plan &1; &2 ( HRPADJP_CP 141 )
Select Other Date; then specify a day ( HRPADJP_CP 206 )
Parameter &1 does not exist for calculation of point &2 ( HRPADJP_CP 308 )
No proper entry is found for point &; check V_T7JPBP_PNTTBL ( HRPADJP_CP 319 )
Not necessary to select Key Date ( HRPADJP_CP 321 )
Not necessary to select birthday check rule ( HRPADJP_CP 322 )
Rounding unit cannot be less than 1 ( HRPADJP_CP 340 )
Not necessary to enter formula here ( HRPADJP_CP 342 )
The proper start date should be & ( HRPADJP_CP 419 )
Contribution method of this plan is not periodical Shoyo ( HRPADJP_CP 507 )
Entered absence hours not consistent with 1-day off nor half-day off ( HRPADJP_LA 102 )
Leave duration is too short to qualify for leave benefits ( HRPADJP_LVE 325 )
The input telephone number follow up the format: xxxx-xxx-xxxx. ( HRPADKR01 014 )
You cannot carry forward donation that is made in year &1 ( HRPADKR01 043 )
Enter a date between &1 and &2 ( HRPADKR01 045 )
Enter an amount between KRW &1 and KRW &2 ( HRPADKR01 046 )
Employee is not eligible for monthly rent deduction ( HRPADKR01 048 )
Create an infotype 3542 record of last year's income ( HRPADKR01 057 )
Employee & is not assigned to a social insurance association yet ( HRPADKR01 105 )
Med. ins. assoc. code &1 is assigned to a different company code already ( HRPADKR01 111 )
No entry in the pension insurance grade table for the amount &1 on &2 ( HRPADKR01 121 )
No entry in the pension insurance grade table for grade &1 on &2 ( HRPADKR01 122 )
Calculated medical insurance grade is greater than 9999 ( HRPADKR01 123 )
No pers. subarea was assigned to medical insurance association &1 yet ( HRPADKR01 125 )
The section code &1 cannot be assigned to personnel area &2 ( HRPADKR01 402 )
Business place &1 cannot be assigned to personnel area &2 ( HRPADKR01 403 )
This combination of business place &1 and section code &2 is not allowed ( HRPADKR01 404 )
Business place &1 was set according to definition of section code &2 ( HRPADKR01 405 )
Inconsistent customizing of section code &1 in Financial Accounting ( HRPADKR01 406 )
Enter an insurance number or correct the representative business place ( HRPADKR01 407 )
Combination of insurance number and representative bus. place not allowed ( HRPADKR01 408 )
Business place &1 cannot be assigned to the medical insurance assoc. &2 ( HRPADKR01 409 )
No employment insurance data maintained for business place &2 ( HRPADKR01 412 )
No pension insurance data maintained for business place &2 ( HRPADKR01 413 )
Business place of head quarter not maintained for company code &1 ( HRPADKR01 414 )
Cannot create more than 1 records using wage type &1 or &4 from &2 to &3 ( HRPADKW 012 )
No valuation rule found with key &1 &2 &3 and absence type &4 ( HRPADKW 033 )
No record with the G type exists in T77PAYKZTS ( HRPADKZREPORTS 132 )
&1 &2 Work time overlaps without an E-element specification in T77PAYKZTS ( HRPADKZREPORTS 135 )
ID number (KZ IIN) doesn't correspond to Birth date ( HRPADKZ_IT 002 )
ID number (KZ IIN) doesn't correspond to Birth century ( HRPADKZ_IT 003 )
ID number (KZ IIN) doesn't correspond to Gender / Title ( HRPADKZ_IT 004 )
Control digit of ID number is not correct (KZ IIN) ( HRPADKZ_IT 005 )
End date &1 is before current date &2 for educational establishment &3 ( HRPADKZ_IT 018 )
End date &1 exceeds current date &2 for educational establishment &3 ( HRPADKZ_IT 019 )
Other institutes with abbreviation &1 exist on date &2 for country &3 ( HRPADKZ_IT 020 )
Institute &1 not found on date &2 for country &3 ( HRPADKZ_IT 021 )
Education Form Code &1 not found on date &2 for country &3 ( HRPADKZ_IT 022 )
Profession &1 not found on date &2 for country &3 ( HRPADKZ_IT 023 )
Qualification &1 not found on date &2 for country &3 ( HRPADKZ_IT 024 )
Profession &1 is not connected with qualification &2 on date &3 ( HRPADKZ_IT 025 )
Code &1 for country &2 is not valid within all interval &3-&4 ( HRPADKZ_IT 029 )
Tax authority code &1 is absent in table T521B ( HRPADKZ_IT 044 )
Vendor &1 does not exist ( HRPADKZ_IT 060 )
For vendor &1, the &2 bank account or other vendor details do not exist ( HRPADKZ_IT 061 )
Payment method &1 does not exist ( HRPADKZ_IT 062 )
Vendor &1 is blocked ( HRPADKZ_IT 063 )
Vendor &1 is marked for deletion ( HRPADKZ_IT 064 )
For vendor &1 IBAN does not exist ( HRPADKZ_IT 065 )
System processes RFC connection with errors ( HRPADKZ_IT 066 )
Code &1 is not present in the military card catalog ( HRPADKZ_IT 090 )
Authentication information for user &1 has been successfully verified. ( HRPADNO_ACF 073 )
Authentication information for user &1 are not correct. ( HRPADNO_ACF 074 )
Unable to determine granularity for record &1 in T7NOEDG_WT_B1. ( HRPADNO_EDG 048 )
Inc.recip.data for PERNR:&1,BUSNR:&2 are stored in incorrect version. ( HRPADNO_EDG 101 )
Executing without direct ACF integration. Credentials for ACF not found. ( HRPADNO_EDG 156 )
No authorization to display data of enterprise: &1. ( HRPADNO_EDG 165 )
Start date of LoA &1 cannot be more than &2 years back in time. ( HRPADNO_EDG_EMP 025 )
End date of LoA &1 cannot be more than &2 years into the future. ( HRPADNO_EDG_EMP 026 )
Wage type &1 has wrong APZNR split &2 which cannot be connected to WPBP ( HRPADNO_EDG_INC 021 )
Personal ID:&1[Org.nr. &2] - Invalid personal nr. or D-number (PERNR:&3) ( HRPADNO_ETC 041 )
Personal ID:&1[Org.nr. &2] - D-number not valid anymore (PERNR:&3) ( HRPADNO_ETC 042 )
Ticket and/or Amount not allowed; Record for encashment already exists ( HRPADOM 084 )
Employee does not meet the age criteria ( HRPADOM 101 )
IT2006 quotas were updated, but excessive consumption occured. ( HRPADPL_LEAVES 003 )
Manual change of IT2006 quotas detected for year &1. ( HRPADPL_LEAVES 004 )
Default value not found; check Customizing settings ( HRPADQA 027 )
Cannot calculate default value; wage type not found in table T7QA42 ( HRPADQA 028 )
Get value from BAdI 'PADQA_WT_VALUATION'; it need be Implement ( HRPADQA 039 )
Employee does not meet eligibility criteria set in BAdI; check long text ( HRPADQA 044 )
Employee does not meet eligibility criteria set in BAdI; check long text ( HRPADQA 045 )
Cannot find the number range interval; make Customizing setting first ( HRPADQA 146 )
Processing is not possible; the employee is a citizen of the GCC ( HRPADQA 305 )
Enter a valid number for the pension insurance certificate ( HRPADRUINFOTYPES 010 )
Driving categories are not defined for country grouping & ( HRPADRUINFOTYPES 027 )
Driving category & is already used for the driving license ( HRPADRUINFOTYPES 028 )
Driving category & is not supported for country grouping & ( HRPADRUINFOTYPES 029 )
Enter a correct type of bonus reserve for the & modifier ( HRPADRUINFOTYPES 060 )
Employee does not have &1 (check V_T7RU0290PRIOR for Doc. Grouping &2) ( HRPADRUINFOTYPES 227 )
Bank account number is not assigned to vendor &1 ( HRPADRUINFOTYPES 738 )
Creditor key &1: bank details and address data missing ( HRPADRUINFOTYPES 739 )
Several Statuses Simultaneously: Collision with Status &1 from &2 to &3 ( HRPADRUIT 008 )
You have not assigned an application type to the subtype &1 ( HRPADRUIT 080 )
Enter a correct type of bonus reserve for the & modifier ( HRPADRUIT 107 )
Absence of same type exists for assignment &1 for period from &2 to &3 ( HRPADRUIT 140 )
Conflicts with sick leave &1 for assignment &2 for period from &3 to &4 ( HRPADRUIT 141 )
Org. reassignment not possible; it would change grouping value &1 &2 ( HRPADRUIT_CE 002 )
Head unit does not exist for personnel assignment ( HRPADRUIT_CE 004 )
Absence of same type exists for assignment &1 for period from &2 to &3 ( HRPADRUIT_CE 010 )
Conflicts with sick leave &1 for assignment &2 for period from &3 to &4 ( HRPADRUIT_CE 011 )
Absence type in copied record must match original; restore orig. value & ( HRPADRUIT_CE 031 )
Start date in copied record must match original; restore orig. value & ( HRPADRUIT_CE 032 )
End date in copied record must match original; restore original value & ( HRPADRUIT_CE 033 )
Authorized detached subdivision that you have selected is set by default ( HRPADRUIT_CE 111 )
This detached subdivision is not authorized for corresponding reports ( HRPADRUIT_CE 112 )
This authorized detach.sub. does not exist within the whole stated period ( HRPADRUIT_CE 113 )
Data that you have changed has no influence on the grouping value ( HRPADRUIT_CE 114 )
Payroll recalculation is not performed automatically ( HRPADRUIT_CE 115 )
This authorized detached subdivision is not found ( HRPADRUIT_CE 117 )
Responsibility flag &1 is not set for the head unit. ( HRPADRUIT_CE 119 )
Responsibility flag &1 is automatically adjusted. Save the infotype. ( HRPADRUIT_CE 120 )
Structure contains object &1 &2 without legal properties ( HRPADRULSC 005 )
Detached subdivision &1 &2 has subordinate legal entity &3 &4 ( HRPADRULSC 006 )
Head unit &1 &2 has superior legal entity &3 &4 ( HRPADRULSC 007 )
Organizational structure does not exist for &1 &2 ( HRPADRULSC 008 )
Ambiguous legal properties for &1 &2 ( HRPADRULSC 009 )
Object &1 &2 is not related to the legal entity ( HRPADRULSC 010 )
Detached subdivision &1 &2 assigned to another detached subdivision ( HRPADRULSC 011 )
Object &1 &2 is not relevant to grouping reason &3 ( HRPADRULSC 012 )
Legal structure does not contain the &1&2 authorized detached subdivision ( HRPADRULSC 016 )
Authorized det.subd. &1 &2 is not responsible for the &3 grouping reason ( HRPADRULSC 017 )
Authorized detached subdivision &1 &2 has no legal properties ( HRPADRULSC 018 )
Detached subdivision &1 &2 is not assigned to a head unit ( HRPADRULSC 019 )
Object &1 &2 is assigned to multiple head units ( HRPADRULSC 020 )
No legal entities exist for the &1 &2 object ( HRPADRULSC 022 )
No head units exist for the &1 &2 object ( HRPADRULSC 023 )
Country grouping &1 is not supported ( HRPADRULSC 101 )
Legal properties infotype does not exist in the system ( HRPADRULSC 102 )
To use this infotype, activate the HCM_LOC_CI_80 business function ( HRPADRUPS 005 )
Personnel assignment &1 is not in public sector on &2 ( HRPADRUPS 010 )
Value of field "&1" is not in value table "&2" ( HRPADRUPS 011 )
Value of field "&1" is not valid during the entire period "&2-&3". ( HRPADRUPS 012 )
Rank Group "&1" is absent in Service Area "&2" ( HRPADRUPS 014 )
Rank "&1" is absent in Rank Group "&2" of Service Area "&3" ( HRPADRUPS 015 )
End date of infotype "&1" is "&2". Check end date of additional payment. ( HRPADRUPS 018 )
No record with Service Area &1 Rnk Group &2 Rank &3 on date &4 ( HRPADRUPS 019 )
The KBK structure for Grouping Value &1 is not set ( HRPADRUPS 020 )
Feature 33PKN returned unexpected value. ( HRPADRUPS_INFTY 004 )
Maintain cost assignment for this infotype. ( HRPADRUPS_INFTY 005 )
Record of this infotype can be created only up to "&1" ( HRPADRUPS_INFTY 006 )
Explicit cost assignment will be used for infotype record ( HRPADRUPS_INFTY 007 )
Variant & of form type & has not been maintained correctly ( HRPADRUREPORTS 108 )
You have selected more than one department; see long text ( HRPADRUREPORTS 138 )
Employee data has been found in package & ( HRPADRUREPORTS 151 )
No data found in infotype 0294 ( HRPADRUREPORTS 153 )
No payroll data can be read for employee ( HRPADRUREPORTS 215 )
No data exists in T7RU9A for organization with key '&1' ( HRPADRUREPORTS 252 )
Wrong Customizing for wage code &1(IN period) and DAQ field &3 section &2 ( HRPADRUREPORTS 263 )
Variant &1 does not contain selected fields ( HRPADRUREPORTS 264 )
Wrong master data. There is overlapping of records in table &1 ( HRPADRUREPORTS 270 )
Error reading current status &. See long text ( HRPADRUREPORTS 521 )
Permitted statuses are not found for status &. See long text ( HRPADRUREPORTS 522 )
Error reading message status. Check Customizing settings for status & ( HRPADRUREPORTS 524 )
Subtype &1 in infotype 0298 is not assigned to a document type ( HRPADRUTRV 101 )
Target subtype is not compatible with source subtype ( HRPADRUTRV 102 )
Wage type codes &1 and &2 assigned to privilege &3 overlap ( HRPADRUTRV 111 )
Wrong Customizing for wage code &1(IN period) and DAQ field &3 section &2 ( HRPADRU_COMMON_REPS 001 )
Enter Payroll Date for Application for Allocation of Funds ( HRPADRU_COMMON_REPS 004 )
System calculates amount &1 times for DAQ field &2 section &3 ( HRPADRU_COMMON_REPS 005 )
&1 is not maintained for the employee ( HRPADRU_COMMON_REPS 227 )
Employee is not insured in Pension Fund ( HRPADRU_COMMON_REPS 229 )
Employee without &1 cannot be processed in report SZV-M ( HRPADRU_COMMON_REPS 230 )
No off-cycle payroll results exist for this employee ( HRPADRU_COMMON_REPS 241 )
Payroll areas must use the same period parameter. See long text ( HRPADRU_COMMON_REPS 242 )
For Org.Key &1, heads for Object IDs &2 and &3 are different ( HRPADRU_COMMON_REPS 273 )
For Org.Key &1, two organization definitions exist in T7RU9A ( HRPADRU_COMMON_REPS 274 )
System has already migrated several entries ( HRPADRU_COMMON_REPS 401 )
Migrate to the new reference table for specifying OGRN ( HRPADRU_COMMON_REPS 402 )
Parameter RECNUM of program HRUURU30 has no value ( HRPADRU_COMMON_REPS 506 )
Entry that contains PERNR=&1, SEQNR=&2, NUMPO=&3 cannot be deleted ( HRPADRU_COMMON_REPS 520 )
Row &4 contains a dublicated entry with PERNR=&1, SEQNR=&2, NUMPO=&3 ( HRPADRU_COMMON_REPS 521 )
Business function HCM_LOC_CI_19 is not active ( HRPADRU_COMMON_REPS 667 )
Infotype records overlap at the time period ( HRPADRU_COMMON_REPS 752 )
Enter a registration number in PFR for &1 form type ( HRPADRU_COMMON_REPS 754 )
Organization does not have &1 ( HRPADRU_COMMON_REPS 755 )
DAQ: sec. &1 / field &2: &3 DAQ field not found; check customizing ( HRPADRU_COMMON_REPS 761 )
&1 is not maintained for organization with key '&2' in T7RU9A ( HRPADRU_COMMON_REPS 764 )
&1 is not maintained for legal entity &2 &3 ( HRPADRU_COMMON_REPS 765 )
Multiple organizations for org. type &1, data type &2, INN &3, KPP &4 ( HRPADRU_COMMON_REPS 776 )
No organizations found for org. type &1, data type &2, INN &3, KPP &4 ( HRPADRU_COMMON_REPS 777 )
Multiple legal enitites with INN &1, KPP &2 for grouping reason &3 ( HRPADRU_COMMON_REPS 778 )
No legal entities found with INN &1, KPP &2 for grouping reason &3 ( HRPADRU_COMMON_REPS 779 )
Default values for RUSP organization used: org. type &1 and data type &2 ( HRPADRU_COMMON_REPS 780 )
Default value of grouping reason &1 used. ( HRPADRU_COMMON_REPS 781 )
Number range for ID &1 with key &2 on date &3 exceeded ( HRPADRU_COMMON_REPS 801 )
Number range for ID &1 with key &2 on date &3 is locked ( HRPADRU_COMMON_REPS 802 )
Number range for ID &1 with key &2 on date &3 not updated ( HRPADRU_COMMON_REPS 803 )
DAQ structure generation error: &1 &2 &3 &4 ( HRPADRU_COMMON_REPS 805 )
DAQ: Data element not specified for field &1, default &2 used ( HRPADRU_COMMON_REPS 806 )
DAQ: Data type &1 for field &2 is not supported ( HRPADRU_COMMON_REPS 807 )
DAQ: Data element & for field &2 does not exist ( HRPADRU_COMMON_REPS 808 )
Enter FSS file name ( HRPADRU_COMMON_REPS 810 )
Employee does not have applications to FSS in this period ( HRPADRU_COMMON_REPS 811 )
No data to display in ALV List ( HRPADRU_COMMON_REPS 812 )
To use this report, activate FSS direct payment functions ( HRPADRU_COMMON_REPS 826 )
No address data defined for OGRN &1 ( HRPADRU_COMMON_REPS 827 )
&4: No data in IT 0021 for subtype '&1', object ID '&2' and number '&3' ( HRPADRU_COMMON_REPS 828 )
Table RUAVE is empty ( HRPADRU_COMMON_REPS 829 )
Employee does not have identification document in grouping &1 ( HRPADRU_COMMON_REPS 830 )
&4: No linked absence for application with type &1 on date &2 number &3 ( HRPADRU_COMMON_REPS 831 )
&4: No record in IT 0006 for subtype '&1', object ID '&2' and number '&3' ( HRPADRU_COMMON_REPS 832 )
&4: No reсord in IT 0009 for subtype '&1', object ID '&2' ( HRPADRU_COMMON_REPS 833 )
No XSLT program defined for this period ( HRPADRU_COMMON_REPS 835 )
Batch size changed since productive run; file inconsistent ( HRPADRU_COMMON_REPS 836 )
No payroll calculation exists for application &1 &2 &3 &4 ( HRPADRU_COMMON_REPS 838 )
Certificate missing for an FSS application of type &1 and start date &2 ( HRPADRU_COMMON_REPS 855 )
Kind of work for employee is not defined ( HRPADRU_COMMON_REPS 862 )
Your settings for &1 field in the &2 form are incorrect ( HRPADRU_COMMON_REPS 863 )
&4:Payment start date does not exist for &1 statement (date &2;number &3) ( HRPADRU_COMMON_REPS 864 )
Add the BIRTH_CERT_GROUP parameter or enter its value ( HRPADRU_COMMON_REPS 865 )
DAQ subapplication &1 does not exists in country grouping &2 on date &3 ( HRPADRU_COMMON_REPS 867 )
&3: Wrong KLADR Code &1 related to Infotype 0006 Subtype &2 ( HRPADRU_COMMON_REPS 868 )
Return value &1 of feature 33ONM does not match pattern NNNN/99999999 ( HRPADRU_COMMON_REPS 876 )
Use country-specific report: transaction HRPAYRU_CRT ( HRPADRU_COMMON_REPS 891 )
Customizing of client with FIAS tables is absent ( HRPADRU_FIAS 001 )
Current client &1 differs from the one customized ( HRPADRU_FIAS 002 )
All file names are invalid (not found). ( HRPADRU_FIAS 005 )
City &1 &2 not found in the FIAS ( HRPADRU_FIAS 008 )
District &1 &2 not found in the FIAS ( HRPADRU_FIAS 009 )
Plan structure &1 &2 not found in the FIAS ( HRPADRU_FIAS 010 )
Street &1 &2 not found in the FIAS ( HRPADRU_FIAS 011 )
Post index &1 differs from recommended &2 ( HRPADRU_FIAS 012 )
House number &1 not found in the FIAS ( HRPADRU_FIAS 014 )
Building number &1 not found in the FIAS ( HRPADRU_FIAS 015 )
County &1 &2 not found in the FIAS ( HRPADRU_FIAS 018 )
Address & & & is inconsistent - check the address data ( HRPADRU_FIAS 019 )
Address cannot be validated, FIAS source is not available ( HRPADRU_FIAS 022 )
Structure number &1 not found in the FIAS ( HRPADRU_FIAS 023 )
Estate status &1 not found in the FIAS ( HRPADRU_FIAS 024 )
Structure status &1 not found in the FIAS ( HRPADRU_FIAS 025 )
Address is probably incomplete; check the address data ( HRPADRU_FIAS 027 )
Object &1 is not created due to no income tax classes defined ( HRPADRU_NDFL 002 )
One payment should not be classified by several income tax rates ( HRPADRU_NDFL 003 )
Class &2 defined for tax class &1 is not compatible with report ( HRPADRU_NDFL 005 )
Employee has payment without classification by % wage code &1 period &2 ( HRPADRU_NDFL 006 )
Employee has payment without payment fact by wage code &1 period &2 ( HRPADRU_NDFL 007 )
Tax agent is not defined for employee ( HRPADRU_NDFL 008 )
View operations must be customized to form legal XML file ( HRPADRU_NDFL 011 )
Wrong format of OKSO ( HRPADRU_OKSO 000 )
Version of OKSO &1 is not found ( HRPADRU_OKSO 001 )
OKSO &1 is not found ( HRPADRU_OKSO 002 )
Actual version of OKSO is not found ( HRPADRU_OKSO 003 )
Qualification with code &1 and OKSO &2 is not found ( HRPADRU_OKSO 004 )
Wrong format of OKSO version ( HRPADRU_OKSO 005 )
OKSO must contain only digits ( HRPADRU_OKSO 006 )
OKSO &1 is not found. Enter the whole code ( HRPADRU_OKSO 007 )
Incomplete information can be stored in the infotype: qualification text ( HRPADRU_OKSO 008 )
Ambiguous selection. Enter OKSO completely or use the search help ( HRPADRU_OKSO 009 )
Insertion of the new OKSO failed ( HRPADRU_OKSO 010 )
OKSO &1 is not found.If you save, the record will be added to the table ( HRPADRU_OKSO 012 )
Employee does not have ranks data in the current period ( HRPADRU_PS_REPS 000 )
Employee does not have public service length data ( HRPADRU_PS_REPS 001 )
Employee has no reserves in the reporting period ( HRPADRU_RESERVES 011 )
Enter a rank with a sequence number assigned ( HRPADSA 185 )
Valuated records cannot be edited ( HRPADSA 187 )
Check the legal assignment of employee &1 ( HRPADUAIT_CE 112 )
Error during seniority processing.See func.mod. HR_SEN_CALCULATE_COMPLETE ( HRPADUAOS 000 )
Specified subtype for passport data will be ignored ( HRPADUAREPORTS 031 )
Conditions for processing of passport data are not defined ( HRPADUAREPORTS 032 )
Option for categories for full month insured persons is not activated ( HRPADUAREPORTS 033 )
Download path should be "&1" as configured for logical file name &2 ( HRPADUAREPORTS 176 )
XML parser: Error in row &1 column &2, error &3 ( HRPADUAREPORTS 177 )
Select a field with wage codes (@) in the Field Selection ( HRPADUAREPORTS 179 )
Data selection period end date & must be prior reclassification date & ( HRPADUN 035 )
Reclassification date & prior to the begin date of selection period ( HRPADUN 038 )
Payscale level obsolete. You are not authorized to maintain this level ( HRPADUN 802 )
Entry for Key '&' '&' '&' '&' and ( HRPADUN 804 )
Record starting from the implementation date of USSC will be updated ( HRPADUN 815 )
End Date is set equal to Start date; no customized default value exist ( HRPADUNEG 020 )
Maintain Proration Factor by overriding it or changing to required value ( HRPADUNEG 048 )
Staff Member changed Duty Station during Schoolyear ! See also long Text. ( HRPADUNEG 157 )
No positions customized for user &1 ( HRPADUN_AAP 010 )
Caution! PN &1 has pending approvals; you are now maintaining PN &2 ( HRPADUN_AAP 200 )
Pay Scale Area Not Available for Pay scale type &1 in Duty station &2 ( HRPADUN_EVE 509 )
Password missing (see documentation) ( HRPADUN_GEN 001 )
Entered password &1 incorrect (see documentation) ( HRPADUN_GEN 002 )
Illegal combination of parameters - see specification ( HRPADUN_GEN 200 )
No entry in funding type in IT 1081. Necessary before creating IT1018. ( HRPADUN_GEN 210 )
Position has "OPEN" vacancy record. Obsolete record not allowed. ( HRPADUN_GEN 230 )
Position has no holder. Delimit Position to abolish. ( HRPADUN_GEN 240 )
Not applicable to General Service staff ( HRPADUN_GEN 701 )
The employee ID card number has not been entered ( HRPADVE 000 )
Select the tax deduction amount option ( HRPADVE 001 )
Employee has reached maximum age for paying RPVH ( HRPADVE 007 )
Employee must contribute to RPVH until & ( HRPADVE 008 )
Employee RPVH contributions must begin from hiring date ( HRPADVE 009 )
Error in social insurance file header ( HRPADVE 010 )
Error when searching for data in the directory cluster ( HRPADVE 011 )
Error when writing in TEMSE file ( HRPADVE 012 )
Error in function module & ( HRPADVE 013 )
Error when importing payroll results ( HRPADVE 014 )
Error when calling feature & ( HRPADVE 016 )
Payroll results for employee cannot be found ( HRPADVE 018 )
Employee does not possess wage type for period ( HRPADVE 019 )
The calculation base unit for the employee cannot be found ( HRPADVE 020 )
Employee does not have retirement date ( HRPADVE 024 )
Collective agreement key not found ( HRPADVE 025 )
Employee does not have &1 in infotype &2 ( HRPADVE 026 )
The employee does not have a wage type &1 for payroll period &2 ( HRPADVE 027 )
The SSO retirement code is not valid ( HRPADVE 029 )
Form & cannot be processed ( HRPADVE 030 )
Quarter invalid ( HRPADVE 031 )
Employee does not possess cumulated amount for requesting specified loan ( HRPADVE 032 )
There are no absence attributes ( HRPADVE 033 )
The employee is of legal age ( HRPADVE 034 )
The period does not correspond to the record start date ( HRPADVE 039 )
The entry start date must be the first day of the month ( HRPADVE 040 )
The entry end date must be the last day in the month ( HRPADVE 041 )
The company address & cannot be found ( HRPADVE 042 )
There is no minimum wage value ( HRPADVE 044 )
There is no long text for function code &1 ( HRPADVE 046 )
There is no text for condition &1 ( HRPADVE 047 )
There is no country text &1 ( HRPADVE 048 )
There is no marital status &1 ( HRPADVE 049 )
The retirement date does not match the report run period ( HRPADVE 050 )
There is no risk code for Personnel Area &1 and Personnel Subarea &2 ( HRPADVE 052 )
Complete all of the data required for an External Entity: Bank Data ( HRPADVE 053 )
Entries missing in the text table for states (T005U) ( HRPADVE 062 )
The record cannot be deleted because it is the only existing one for RPVH ( HRPADVE 063 )
Error on opening TemSe file ( HRPADVE 064 )
Error when reading TemSe file ( HRPADVE 065 )
No record has been selected ( HRPADVE 066 )
Object specification missing ( HRPADVE 067 )
The authorization date &1 must be later than the last payroll &2 ( HRPADVE 072 )
Cannot find number of minimum wages for Social Insurance ( HRPADVE 085 )
No &1 type records found. ( HRPADVE 099 )
It is not possible to open TemSe file ( HRPADVE 100 )
Relation name &1 is inconsistent with the naming convention ( HRPAD_BOL 038 )
Inconsistent relation &1 is deleted from infotype object &2 ( HRPAD_BOL 039 )
Personal ID number already exists (see Per.no. &) ( HRPAD_CNT_ADDON 001 )
Deletion not permitted; validity period of personnel area is specified ( HRPAD_DELIMIT 002 )
Personnel area is valid until &1; adjust the organizational assignment ( HRPAD_DELIMIT 005 )
Personnel subarea is valid until &1; adjust the organizational assignment ( HRPAD_DELIMIT 008 )
Employee group is valid until &1; adjust the organizational assignment ( HRPAD_DELIMIT 011 )
Employee subgroup is valid until &1; adjust the organizational assignment ( HRPAD_DELIMIT 014 )
Deletion is not permitted; validity period of employee group is specified ( HRPAD_DELIMIT 015 )
Validity period of personnel area does not match personnel subarea(s) ( HRPAD_DELIMIT 016 )
Validity period of employee group does not match employee subgroup(s) ( HRPAD_DELIMIT 017 )
Validity period must lie between &1 and &2 ( HRPAD_DELIMIT 018 )
Assigned personnel subareas are adjusted; see long text ( HRPAD_DELIMIT 023 )
Assigned employee subgroups are adjusted; see long text ( HRPAD_DELIMIT 024 )
Activate switch ADMIN DELIM in table T77S0 ( HRPAD_DELIMIT 025 )
Validity period must lie between &1 and &2 ( HRPAD_DELIMIT_ACTION 000 )
Administrator &1 is valid until &2; assign a valid one as of &2 ( HRPAD_DELIMIT_SACHX 002 )
End date of data record &1 is after end date of data record infotype 0710 ( HRPAD_MGE_ARC 000 )
Debit memo procedure is not permitted for payment method &1, country &2 ( HRPANL_EN 001 )
Life-Course Saving/Withdrawal selected for employee with AOW age ( HRPANL_EN 003 )
Employee is labour disabled or functional limited but reason is missing ( HRPANL_EN 052 )
The employee is automatically marked as labour disabled in form 0-10 ( HRPANL_EN 053 )
It is not possible to display PDF and SAPScript forms at the same time ( HRPANL_EN 054 )
There is no suitable PDF form found to display the annual tax statement ( HRPANL_EN 082 )
No information available for this annual tax statement ( HRPANL_EN 083 )
Address of employee is missing ( HRPANL_EN 084 )
Error during processing. Please contact your payroll administrator. ( HRPANL_EN 085 )
T511K Constant &1 could not be read at &2 for MOLGA &3 ( HRPANL_EN 107 )
Inconsistency between error message code '02' and column 'AP' ( HRPANL_EN 152 )
Inconsistency between error message code '&1' and column 'AC', 'AE, 'AG' ( HRPANL_EN 153 )
Inconsistency between error message code '25' and column 'AJ' ( HRPANL_EN 154 )
Start date for Inc. Std Education not within validity period of infotype ( HRPANL_EN 204 )
Already another payment reduction education selected; check your choice ( HRPANL_EN 205 )
Increase Std of Education payment reduction valid once per employee ( HRPANL_EN 206 )
Illness is less than the Poortwachter threshold; check or delete IT0764 ( HRPANL_EN 221 )
Infotype status is "New" and can only be changed to "Obsolete" ( HRPANL_EN 241 )
Field '&1' is mandatory for the notification and is filled automatically ( HRPANL_EN 258 )
No payroll paramenter available for payroll area &1 ( HRPANL_EN 259 )
Payroll Periods are not generated for Period Parameter &1 ( HRPANL_EN 261 )
No default entries in fields of IT3250 due to error in payroll simulation ( HRPANL_EN 262 )
No-Risk policy migration date error ( HRPANL_EN 270 )
No proxy assigned to notification type &1 ( HRPANL_EN 317 )
Payroll tax number for communication with tax office missing ( HRPANL_EN 320 )
Payroll tax number of Chain Party missing ( HRPANL_EN 321 )
Phone number (&1) of contact person &2 is invalid ( HRPANL_EN 322 )
Code Welfare Claimnt &1 assigned to employee; enter mandatory information ( HRPANL_EN 328 )
Provide a reason for the message cancellation ( HRPANL_EN 343 )
You must select a saving scheme in group &1 ( HRPANL_EN 412 )
Deleting EIR data not allowed in productive system ( HRPANL_EN 451 )
Select only tasks that need IT0019 records to be created ( HRPANL_EN 471 )
The method &1 in class &2 cannot be used ( HRPANL_EN 504 )
This report is no longer used ( HRPANL_EN 511 )
Report &1 cannot not be used. ( HRPANL_EN 512 )
Conversion rule '&' only valid for persons at AOW age or over ( HRPANL_EN 864 )
Special Provision 0005 is only possible as of 01.01.2016 ( HRPANL_EN 866 )
Conversion rule &1 not allowed in comb. with special provision 0005 ( HRPANL_EN 869 )
The date calculation method has returned an invalid date ( HRPAO_DPR_GENERAL 002 )
&1 is not a valid field; enter a valid field ( HRPAO_DY_CUST 013 )
Field &1 is not available for Configuration ID &2 ( HRPAO_DY_CUST 014 )
Do not set the OR indicator on the final line ( HRPAO_DY_CUST 018 )
Correct the notation for &1 ( HRPAO_DY_CUST 020 )
&1 is not a valid operation ( HRPAO_DY_CUST 023 )
Return type &1 of method &2 not valid; must be character-like ( HRPAO_DY_CUST 024 )
Value &1 is not a valid operation ( HRPAO_DY_CUST 025 )
Value &1 cannot be used as Configuration ID ( HRPAO_DY_CUST 027 )
&1 is not a valid Configuration ID ( HRPAO_DY_CUST 028 )
&1 is an invalid Configuration ID for the Infotype Version &2 ( HRPAO_DY_CUST 029 )
Operations are processed in a predefined order; please see long text ( HRPAO_DY_CUST 030 )
Class &1 is not a subclass of CL_HRPAO_DY_BASE_GET_OPERATION ( HRPAO_DY_CUST 036 )
Class &1 of parameter group &3 is not identical with class &2 ( HRPAO_DY_CUST 039 )
&1 is not a valid date ( HRPAO_DY_CUST 041 )
Method &1 of parameter group &3 is not identical with method &2 ( HRPAO_DY_CUST 042 )
Specify class name and method name in parameter group &1 ( HRPAO_DY_CUST 047 )
Value &1 is not a valid field name for default values ( HRPAO_DY_CUST 052 )
&1 is not a general field ( HRPAO_DY_CUST 053 )
Name for the dynamic processing rule &1 contains invalid characters ( HRPAO_DY_CUST 058 )
Enter a valid general field; field &1 is an invalid general field ( HRPAO_DY_CUST 070 )
Define a parameter group for calculation method &1 ( HRPAO_DY_CUST 071 )
Class &1 is not a subclass of CL_HRPAO_DY_BASE_CALC_METH ( HRPAO_DY_CUST 072 )
&1 has a data type which is not supported ( HRPAO_DY_CUST 073 )
Enter a valid name for parameter group; &1 contains invalid characters ( HRPAO_DY_CUST 074 )
Enter an order number that is greater than or equal to 100 ( HRPAO_DY_CUST 085 )
Class &1 is not a subclass of CL_HRPAO_DY_BASE_ANY_OPERATION ( HRPAO_DY_CUST 097 )
You are not authorized to change the customer status ( HRPAO_DY_CUST 099 )
No further checks for parameters because class &1 contains syntax errors ( HRPAO_DY_CUST 103 )
Choose a different name; Rule &1 already exists for Configuration ID &2 ( HRPAO_DY_CUST 131 )
These converted rules are not yet saved to the database ( HRPAO_DY_CUST 134 )
You cannot save rules with names in the customer name space (&1) ( HRPAO_DY_CUST 135 )
You cannot save rules with names in the SAP name space (&1) ( HRPAO_DY_CUST 136 )
You are not authorized to save the converted rules ( HRPAO_DY_CUST 200 )
Converted rule for dynamic action (Key: &1) already exists on DB ( HRPAO_DY_CUST 203 )
Choose a different name; Rule &1 already exists for Configuration ID &2 ( HRPAO_DY_CUST 204 )
No text can be read for BAdI field - &1 in Employee short profile ( HRPAO_MASTERDATA 015 )
Config ID &1 does not exist ( HRPAO_MASTERDATA 051 )
&1 cannot be displayed for config ID &2 of OTYPE &3, Version &4 ( HRPAO_MASTERDATA 053 )
Hook Class &1 of configuration &2 can not be used. ( HRPAO_MASTERDATA 061 )
No OADP data view is available in the extended value help ( HRPAO_MASTERDATA 121 )
No search category is available in the extended value help ( HRPAO_MASTERDATA 123 )
No evaluation path is available in the extended value help ( HRPAO_MASTERDATA 125 )
Field '&1' does not contain a valid object ID for navigation. ( HRPAO_MASTERDATA 301 )
No data found that matches filter criteria. ( HRPAO_MASTERDATA 302 )
Data not created due to missing information, please create manually. ( HRPAO_MASTERDATA 303 )
Default values provided in customizing cannot be fully set. ( HRPAO_MASTERDATA 304 )
An error occured during Dynamic Processing ( HRPAO_MASTERDATA 306 )
A warning was returned during Dynamic Processing ( HRPAO_MASTERDATA 307 )
An error occured. Navigation could not be triggered. ( HRPAO_MASTERDATA 310 )
Sorry, we have truncated your notes because they exceed the allowed space ( HRPAO_MASTERDATA 313 )
Query &1 does not contain required output fields ( HRPAO_SEARCH 002 )
Field &1 cannot be used as a selection field ( HRPAO_SEARCH 032 )
Category &1 is still used in view cluster VC_T77PAOSCATGRP ( HRPAO_SEARCH 035 )
Category &1 is still used in view cluster VC_T77PAOSQUINFO ( HRPAO_SEARCH 036 )
Query &1 could not be deleted - Return code: &2 ( HRPAO_SEARCH 072 )
Not all required fields are available in the infoset &2 of category &1 ( HRPAO_SEARCH 073 )
No connector exists for model &1 ( HRPAO_SEARCH 313 )
Collision with &1. Existing record will be deleted from &2 to &3 &4. ( HRPAO_TIMEDATA 004 )
Collision with &1. Existing record will now be valid from &2 to &3 &4. ( HRPAO_TIMEDATA 005 )
Collision with &1 from &2 to &3 &4. Record cannot be created ( HRPAO_TIMEDATA 008 )
Collision with &1 from &2 to &3 &4 ( HRPAO_TIMEDATA 009 )
No time recording according to infotype Planned Working Time (0007) ( HRPAO_TIMEDATA 021 )
No time recording for person &1 during validity period of infotype 0050 ( HRPAO_TIMEDATA 023 )
End date of absence record automatically changed to &3 ( HRPAO_TIMEDATA 030 )
Begin date of military service record automatically changed to &3 ( HRPAO_TIMEDATA 031 )
T51P6 setting &1 for non-retro (ARRS) not supported ( HRPAY00DEC 014 )
T51P6 setting &2 for retro (RETRO) not supported ( HRPAY00DEC 015 )
Negative Payments ('NP' T7PBSDEC_WTGRP) don't include wage type &1 ( HRPAY00DEC 023 )
Costs table is empty for period &, run in period &. ( HRPAY00DEC 041 )
Payee key &1: bank details and address data missing ( HRPAY00DME 001 )
Address data for bank &2 (ctry &1) missing in bank master rec.(tab. BNKA) ( HRPAY00DME 002 )
Payment method for payee key &1 not entered ( HRPAY00DME 003 )
House bank account &3 does not exist (house bank &2, company code &1) ( HRPAY00DME 004 )
House bank &1 does not exist in company code &2 (table T012) ( HRPAY00DME 005 )
SEPA purpose code &1 not permitted for country grouping &2 ( HRPAY00DME 010 )
Negative transfer amount for & & & &. ( HRPAY00DME 020 )
Error when evaluating feature & ( HRPAY00DME 021 )
Error during name formatting ( HRPAY00DME 022 )
Infotype 0001 (Organizational Assignment) not available ( HRPAY00DME 023 )
Incorrect country grouping: & instead of & ( HRPAY00DME 024 )
Payment run still not executed from preliminary period ( HRPAY00DME 025 )
Payment run & & is already reserved ( HRPAY00DME 026 )
No authorization for reading the payroll results ( HRPAY00DME 027 )
Error when reading the payroll results ( HRPAY00DME 028 )
No authorization for writing the payroll results ( HRPAY00DME 029 )
Error when writing the payroll results ( HRPAY00DME 030 )
Selected personnel numbers ( HRPAY00DME 032 )
Evaluated personnel numbers ( HRPAY00DME 033 )
Personnel numbers with collective bank transfer ( HRPAY00DME 034 )
Personnel numbers rejected ( HRPAY00DME 035 )
Processed payments ( HRPAY00DME 036 )
Payments already executed ( HRPAY00DME 037 )
Payments not processed ( HRPAY00DME 038 )
Collective Bank Transfers to Be Executed ( HRPAY00DME 039 )
Collective bank transfers executed successfully ( HRPAY00DME 040 )
Collective bank transfers contain errors ( HRPAY00DME 041 )
Retroactive conversion to a collective bank transfer is not possible ( HRPAY00DME 101 )
Collective bank transfer clashes with a single bank transfer ( HRPAY00DME 102 )
The logging level with value &1 should be checked ( HRPAY00MSG_HANDLER 003 )
Table to be logged &1 cannot be output ( HRPAY00MSG_HANDLER 011 )
Example output of error message with Message Handler ( HRPAY00MSG_HANDLER 801 )
Logging with a long text ( HRPAY00MSG_HANDLER 804 )
Example exception via Message Handler with T100 ( HRPAY00MSG_HANDLER 805 )
There are no tasks for the selection criteria. ( HRPAY00_NT_MSG 002 )
No status entries were found for the tasks. ( HRPAY00_NT_MSG 003 )
No context entries were found for the tasks. ( HRPAY00_NT_MSG 004 )
The Customizing for the class names is missing in table &1 and &2. ( HRPAY00_NT_MSG 005 )
There is no Customizing for the administrator assignment in table &1. ( HRPAY00_NT_MSG 006 )
The Customizing for the customer documentation is missing in table &1. ( HRPAY00_NT_MSG 007 )
There is no Customizing for the admin class in table &1 for MOLGA = &2. ( HRPAY00_NT_MSG 008 )
No processor and/or administrator group was found for task. ( HRPAY00_NT_MSG 012 )
Error occurred generating instance for cntry grp &1 area &2 subarea &3. ( HRPAY00_NT_MSG 014 )
Only select entries with the same type of administrator list. ( HRPAY00_NT_MSG 015 )
Error evaluating the selection parameters ( HRPAY00_NT_MSG 052 )
The instance of admin. class &1 coule not be created. ( HRPAY00_NT_MSG 054 )
Select at least one line. ( HRPAY00_NT_MSG 101 )
The parameter MOLGA was not specified. ( HRPAY00_NT_MSG 103 )
You may only implement interface &1. ( HRPAY00_NT_MSG 105 )
Only select tasks with the same free text. ( HRPAY00_NT_MSG 106 )
As status change is only possible in the assigned administrator list. ( HRPAY00_NT_MSG 151 )
Only select tasks from the same area/subarea.. ( HRPAY00_NT_MSG 152 )
Only select tasks with a link to an administrator list. ( HRPAY00_NT_MSG 153 )
Reference &1 cannot be opened. ( HRPAY00_NT_MSG 154 )
Please select a date that lies in the future. ( HRPAY00_NT_MSG 155 )
Processor &1 is not permitted on date &2. ( HRPAY00_NT_MSG 201 )
Processor &1 is not permitted for personnel number &2 on date &3. ( HRPAY00_NT_MSG 202 )
Administrator group &1 for personnel number &2 on &3 not permitted ( HRPAY00_NT_MSG 203 )
Invalid parameter entry for saving the test run in the NT ( HRPAY00_NT_MSG 212 )
File type &1 is not supported for display ( HRPAY00_NT_MSG 251 )
Customer-specific MIME type &1 does not have the required format. ( HRPAY00_NT_MSG 252 )
No authorization to read &1 ( HRPAY00_NT_MSG 253 )
Not all tasks can be displayed due to missing authorizations. ( HRPAY00_NT_MSG 301 )
Target status &1 is set for the selected tasks. ( HRPAY00_NT_MSG 404 )
Adjustment rule &1 in cumulation rule &2 does not exist ( HRPAY99AVERA 100 )
Check the Views V_T51AV_A and V_T51AV_P ( HRPAY99AVERA 110 )
Retr.date &1 is before earliest retr.acc.date &2 of the payroll areas ( HRPAY99CALC 001 )
HR_PAYROLL: Payroll &1 cannot be executed for country grouping &2 ( HRPAY99CALC 003 )
HR_PAYROLL: Variant &1 does not exist for payroll program &2 ( HRPAY99CALC 004 )
HR_PAYROLL: Parameter &1 not specified or specified incorrectly ( HRPAY99CALC 005 )
Parameter error when calling HR_PAYROLL function ( HRPAY99CALC 006 )
HR_PAYROLL: Country group. &1 of payroll run not equal to trans. para. &2 ( HRPAY99CALC 007 )
There is a cost distrib.of &3% without company code from &1 to &2 ( HRPAY99CALC 010 )
Payment method &1 is not defined as check ( HRPAY99CALC 015 )
Payment method is blank in infotype 9 for personnel number &1 ( HRPAY99CALC 016 )
Application &1 not defined (table T596A) ( HRPAY99CALC 021 )
Cumulation wage type &1 not defined (table T596G) ( HRPAY99CALC 022 )
No assignment to cumulation wage type &1 (table &2) ( HRPAY99CALC 023 )
The operation ADDWTC is no longer allowed (calculation rule &1) ( HRPAY99CALC 031 )
This is a test for personnel number &1 ( HRPAY99CALC 032 )
Enter a country grouping ( HRPAY99CALC 101 )
There are more up-to-date results for personnel number &1 ( HRPAY99CALC 201 )
RGDIR already contains an entry with the same logical key ( HRPAY99CALC 698 )
RGDIR contains entries with the same sequence number ( HRPAY99CALC 699 )
Payment date &1 is below the cumulation window (&2 - &3) ( HRPAY99CALC 701 )
Payment date &1 is above the cumulation window (&2 - &3) ( HRPAY99CALC 703 )
Payroll area &1 still has no control record ( HRPAY99CALC 705 )
Payroll area &1 does not yet exist ( HRPAY99CALC 706 )
The payment date (&1) is below the permitted window (&2 - &3) ( HRPAY99CALC 711 )
The payment date (&1) is above the permitted window (&2 - &3) ( HRPAY99CALC 712 )
HR preparation for archiving is currently running for this pers.no. ( HRPAY99CALC 718 )
Ret.Acc. date of EE: &1 before the earliest Ret.Acc &2 of payroll area &3 ( HRPAY99CALC 726 )
Manual check payable on &1 can not be added (after &2) ( HRPAY99CALC 736 )
Invalid payroll area change in personnel assignment &1 ( HRPAY99CALC 737 )
Payment date does not exist for &1 &2 &3 &4 ( HRPAY99CALC 738 )
Payroll with Off-Cycle Reason Type "On-Demand" Is Not Allowed ( HRPAY99CALC 745 )
It is not possible to call payroll again. Maximum calls: &1 ( HRPAY99CALC 747 )
No time window is defined for the cumulations for country &1 ( HRPAY99CUMU 001 )
Cumulation type &2 is missing for country &1 ( HRPAY99CUMU 002 )
The parameter for cumulation type &1 is not yet defined ( HRPAY99CUMU 003 )
Version number for payroll result no. &1 not current ( HRPAY99CUMU 004 )
Table HRPY_RGDIR already includes an entry for the following key: ( HRPAY99CUMU 011 )
Table HRPY_WPBP already has an entry for the following key: ( HRPAY99CUMU 012 )
No entry in table T512W for wage type & at time & ( HRPAY99CUMU 101 )
No parameter for cumulation type & in table T56C2 ( HRPAY99CUMU 102 )
No cumulation interval in T56C3 for parameter & on key date & ( HRPAY99CUMU 103 )
Internal error when assigning to Table & ( HRPAY99CUMU 104 )
Cumulation table & does not have a component called BEGDA ( HRPAY99CUMU 105 )
Cluster & was not converted in this step ( HRPAY99CUMU 154 )
Conversion is not necessary for cluster & ( HRPAY99CUMU 156 )
Personnel number & could not be locked ( HRPAY99CUMU 159 )
Personnel no. & has more PCL2(Rx) data records than entries in RGDIR ( HRPAY99CUMU 161 )
Only 01 is possible as the start of the cumulation interval ( HRPAY99CUMU 501 )
You must not start the report for country version &1 ( HRPAY99CUMU 506 )
Only 36 clusters can be processed simultaneously! ( HRPAY99IMPEXP 007 )
Export of payroll directory (RGDIR) not allowed ( HRPAY99IMPEXP 017 )
No authorization for payroll cluster ( HRPAY99IMPEXP 018 )
No authorization for PCLx cluster ( HRPAY99IMPEXP 019 )
Currency &1 is not valid on &2 ( HRPAY99LOAN 003 )
Error when converting amount for constant &1 from T511P ( HRPAY99LOAN 006 )
Loan condition &1 &2 does not exist on &3 ( HRPAY99LOAN 010 )
First delete the associated payments ( HRPAY99LOAN 015 )
Loan infotype not allowed for this employee (s. feature ALOAN) ( HRPAY99LOAN 017 )
Value date is not maintained for payroll area &1 ( HRPAY99LOAN 021 )
Employee &1 changes company code on &4 ( HRPAY99LOAN 022 )
Operation Vakey &1 is only permitted together with function P0045 and PRT ( HRPAY99LOAN 023 )
Operatn &1 with specificatn 'N' only permitted together with funct. P0045 ( HRPAY99LOAN 024 )
Operation &1 specification 'ANRTE, TILBT' is only possible with P0045 ( HRPAY99LOAN 025 )
Operatn &1 specificatn 'N' is only possible together with P0045 and PRT ( HRPAY99LOAN 026 )
Complete repayment exists; you must first delete it ( HRPAY99LOAN 029 )
There are several records for this loan, adjust the end date ( HRPAY99LOAN 035 )
On &1 no balance is available; check the repayment ( HRPAY99LOAN 037 )
After loan balance has been transferred, no further payments are possible ( HRPAY99LOAN 039 )
The loan has been delimited too early ( HRPAY99LOAN 040 )
Parameters have been changed. Transfer not possible ( HRPAY99LOAN 041 )
Loan already repaid in full on &1 ( HRPAY99LOAN 042 )
You are not allowed to change the installment; it is a fixed value ( HRPAY99LOAN 043 )
Calculated installment &1 is greater than maximum allowed input value &2 ( HRPAY99LOAN 045 )
Loan conditions do not include repayment up to specified end date ( HRPAY99LOAN 046 )
Installment cannot be calculated; error in repayment plan ( HRPAY99LOAN 047 )
Calculation of installment terminated because of timeout ( HRPAY99LOAN 048 )
Installment is imprecise; calculation terminated because of timeout ( HRPAY99LOAN 049 )
Payroll periods (table T549Q) not generated up to &1 ( HRPAY99LOAN 050 )
No balance remains open at the start of regular repayments on &1 ( HRPAY99LOAN 051 )
Valid to date cannot be calculated; error in repayment plan ( HRPAY99LOAN 052 )
End of loan on &1 comes before the start of the infotype record ( HRPAY99LOAN 053 )
End of loan on &1 is in different period than complete repayment on &2 ( HRPAY99LOAN 055 )
Currency &1 is not in the whole period from &2 to &3 ( HRPAY99LOAN 056 )
Amount for payment &1 from &2 could not be determined ( HRPAY99LOAN 057 )
A loan with the sequence number &1 already exists ( HRPAY99LOAN 058 )
Currency &1 is not valid for default or fixed values ( HRPAY99LOAN 060 )
Payment Model &1 &1 Has Other Periodicity As Loan Condition ( HRPAY99LOAN 066 )
Condition &1 requires individual reference interest rate for loan &2 &3 ( HRPAY99LOAN 071 )
Only payroll type 'A' is permitted for absence payment ( HRPAY99OC 001 )
Only off-cycle reasons with the type 'Absence Payment' are permitted here ( HRPAY99OC 002 )
Only payroll type ' ' is permitted for advance payments ( HRPAY99OC 004 )
Only payroll type 'A' is permitted for bonus payments ( HRPAY99OC 005 )
Only payroll type ' ' is allowed for on-demand payments ( HRPAY99OC 006 )
Personnel area/subarea combination &1/&2 is invalid ( HRPAY99OC 008 )
The off-cycle reason &1 does not exist for country grouping &2 ( HRPAY99OC 010 )
Please enter an off-cycle reason ( HRPAY99OC 012 )
Please enter a pay date ( HRPAY99OC 013 )
Wage type & is invalid ( HRPAY99OC 014 )
Wage type & is not permitted for infotype 0267 ( HRPAY99OC 015 )
Currency &1 does not correspond to country currency &2 ( HRPAY99OC 016 )
Off-cycle reason and payroll type do not match ( HRPAY99OC 017 )
Only one record with bank details type 5 is permitted ( HRPAY99OC 021 )
One of the new records must have bank details type 5 ( HRPAY99OC 022 )
Enter either a default value or percentage ( HRPAY99OC 023 )
Only bank details types 5 and 6 are permitted ( HRPAY99OC 024 )
& is not a valid payment method ( HRPAY99OC 025 )
This payment method is not a check! Is this correct? ( HRPAY99OC 026 )
Start and end date must correspond to the pay date ( HRPAY99OC 027 )
Start and end date must be within the range of the selected periods ( HRPAY99OC 028 )

Length: 666071 Date: 20191121 Time: 035741

Count: 2391     sap01-206 ( 2656 ms ) This documentation is copyright by SAP AG.

Our Service

Looking for Support? Questions?

The

Consolut

Callback-Service

Leave us your contact details and we will call you back. Panels marked with * are mandatory.