Messages

Complete Message Docu Documentation From JH432 up to JS167

This documentation is copyright by SAP AG.
Count: 2845 Skipped: 11
Message Docu
Description
Contract deter.canceled since contract & is blocked. Price is provisional ( JH 433 )
Bank details &1 &2 &3 are blocked. Reason: &4 ( JH 434 )
Payer & has no bank details ( JH 435 )
Sales area &1 &2 &3 does not exist ( JH 458 )
Tax classification & has not been defined for tax category & ( JH 462 )
Interim settlement will not be performed for contrct & in coll.processing ( JH 464 )
Specify a percentage rate between 0 and 100 ( JH 467 )
Specify a positive amount below the net value &1 &2 ( JH 468 )
In settlement &1/&2 the P/I record has not been billed or cancelled ( JH 469 )
Bill.dataset &/&/&: Unexpected preceding document of bill.dataset type ( JH 470 )
Billing has not been performed for all assignments for contract & ( JH 471 )
No settlement required for unbilled billing dataset &/&/& ( JH 472 )
Condition type & not in pricing procedure & ( JH 475 )
No assessment basis for condition type (No gross contract determined) ( JH 480 )
Next scale level achieved by increasing target quantity & ( JH 481 )
The selected documents could not be cancelled ( JH 487 )
The documents selected cannot be charged off ( JH 489 )
In document &1 the charge-off amount was rounded from &2 to &3 &4 ( JH 491 )
External sales volume was not created ( JH 497 )
Enter price elements for external sales volume ( JH 498 )
Error reading condition basis for twinned billing dataset (Type &1) ( JH 503 )
Select the entries required and execute the function again ( JH 504 )
An assignment that cannot be settled exists for contract & ( JH 507 )
Please enter a number greater than 1 for parallel processing ( JH 508 )
Partial processing only possible in test mode ( JH 511 )
Too many rcrds for one job (Please increase level of parallel processing) ( JH 513 )
File & has already been imported into the IS-M/AM System ( JH 514 )
File & was already processed in part (restart) ( JH 515 )
Batch input session creation only possible for ad items ( JH 517 )
Item transfer for order & only possible with specified item number ( JH 523 )
Several booking units were assigned to the AI item ( JH 525 )
The dataset number could not be determined from field 'KPOSN' ( JH 529 )
Alternative payer &1 (sales area &2, sequence no. &3) ( JH 531 )
Coll.authoriz.for bank details for item &, adv.& has expired on bill.date ( JH 533 )
Alias BP &1 for BP &2 has the credit query &3 ( JH 534 )
Alias BP &1 for BP &2 has creditworthiness &3 ( JH 535 )
Payer & is already different (Payer not been changed) ( JH 536 )
Inadmissible bill.split for cntrct billing doc. (P=&1, A=&2, SP=&3,SA=&4) ( JH 539 )
The system could not determine a contract requirement for sales agent &1 ( JH 541 )
Sales agent, commission category or cntrct category is incorrect (lngtxt) ( JH 542 )
Position the cursor on a contract ( JH 545 )
Position the cursor on a contract requirement ( JH 546 )
No additional contract requirement exists for sales agent &1 ( JH 547 )
Entry & does not exist. Please enter a valid entry or & ( JH 550 )
Error occurred whilst generating sales order for voucher shipping ( JH 557 )
Voucher shipping error: Edition & & cannot be delivered on & ( JH 558 )
Sales document type & is not admissible ( JH 559 )
Order deadline reached on & at & ( JH 562 )
Competitor exclusion check not permitted in this sales area ( JH 563 )
Copy variant & is not intended for item type & but for & ( JH 567 )
An MC cannot be edited since an order is still being processed ( JH 568 )
The issue on & for edition & & does not have copy number & ( JH 569 )
No partner role & in partnr det.pr.for item type & and item category & ( JH 572 )
Incorrect combination of city, postal code and street ( JH 580 )
Entry reason for conditions &1 is not admissible ( JH 591 )
Select an entry ( JH 601 )
Select one entry only ( JH 604 )
No BU variant type maintained for issue variant type & ( JH 605 )
No PU for PPU & and publication date &. Internal error ( JH 606 )
Specify a sales area ( JH 609 )
The capacity of booking unit & has been exhausted for & ( JH 610 )
Booking unit & has already been booked ( JH 611 )
Booking unit &1 has been booked ( JH 612 )
Potential non-readers for "total market coverage" only ( JH 614 )
Name of contact person cannot be changed ( JH 619 )
Box number identifier / location cannot be changed ( JH 622 )
No collection authorization available for bank details & & ( JH 623 )
No suitable bank details available for payer & ( JH 624 )
Search restricted to processing type &. Category is ignored ( JH 629 )
No booking units matched the selection ( JH 631 )
No positioning attributes exist for sub-item & ( JH 651 )
No positioning alternatives exist for item & ( JH 652 )
Do not select the first line of the positioning alternatives ( JH 653 )
Incorrect billing type: Charge-off documents cannot be charged off ( JH 658 )
Choose a copying variant for copying billing datasets ( JH 663 )
No additional bank details can be created for BP & ( JH 665 )
Choose a copying variant for copying schedule lines ( JH 666 )
Reason & and reason & could not be entered simultaneously ( JH 669 )
M/SD is not active. Selections relating to carrier routes not possible ( JH 671 )
Postal quantity only for items subject to postal charges ( JH 673 )
Sales agent determination deactivated for client &1 ( JH 691 )
Sales agent determination deactivated for sales area &/&/& ( JH 692 )
General exclusion & prevents sales agent determination ( JH 693 )
Contract req. &1: Cancellation indicator set for &2 ( JH 695 )
Requirement type &1: Extra commission &2: Cancell.indicator set fr comm. ( JH 697 )
Sales agent & has no contract with a suitable requirement ( JH 702 )
Order & is from the technical system and cannot be modified ( JH 707 )
You can only perform a limited pricing analysis ( JH 715 )
Selected documents use more than one pricing procedure ( JH 721 )
The conditions found differ from those in the contract ( JH 722 )
Contract &1 is not suitable as a template: &2 ( JH 723 )
The system only displays assignments for contract item & ( JH 725 )
Item &: Requirement & has an incorrect barter deal indicator ( JH 728 )
No trivial amounts blocking reason recorded in sales area & & &. ( JH 737 )
Order cannot be posted with dummy sold-to party &1 ( JH 739 )
Error in internal lock management ( JH 747 )
Selected schedule lines do not have same BBU. Please make new selection ( JH 753 )
Log display for blocked orders only ( JH 756 )
The list is incomplete because display authorization(s) are missing ( JH 763 )
The list of notes for collective run & is incomplete ( JH 764 )
The document list for collective run & is incomplete ( JH 765 )
No generation periods exist as a result of TF generation ( JH 779 )
Only date or copy date categories admiss.when displaying till forbid ads ( JH 780 )
The selected sales areas do not exist ( JH 781 )
No results produced from the entire copy number selection for all BUs ( JH 794 )
Enter a required date for date type 'R' or 'S' ( JH 795 )
Please enter start and end date for date type 'R' or 'S' ( JH 796 )
Forbid only possible for date type 'F' ( JH 797 )
Do not access the function recursively ( JH 800 )
Document has incorrect billing category for processing with transaction & ( JH 802 )
Please place cursor in the line above a selected line in the table ( JH 804 )
Specify millimeters or columns ( JH 805 )
At least one schedule line selected contains no special publications ( JH 806 )
Content component & is a special publication ( JH 807 )
Booking unit & is not a basic booking unit ( JH 808 )
Commission basis could not be converted to settlement unit ( JH 810 )
Settlement could not be performed for contract &1 (see log and long text) ( JH 811 )
No valid commission keys were found ( JH 812 )
Condition reference could not be determined (see long text) ( JH 813 )
Pricing procedure could not be found - key & & & & ( JH 814 )
Vendor view could not be read for payee ( JH 815 )
Vendor view could not be read for invoicing party ( JH 816 )
Vendor view could not be read for sold-to party ( JH 817 )
Vendor view could not be read for supplier of goods ( JH 818 )
Condition key for condition reference could not be determined ( JH 819 )
Sales agent contract & is already being processed (user &) ( JH 821 )
Condition reference could not be determined (see long text) ( JH 823 )
Obligatory condition records for condition reference & are missing ( JH 826 )
Conversion of ad size from unit & to unit & is not possible ( JH 827 )
Conversion of basic commission qty from unit & to unit & is not possible ( JH 828 )
Sales agent assignment dataset incomplete - no settlement ( JH 829 )
No calculation type has been assigned to condition reference & ( JH 830 )
Condition reference & does not exist ( JH 831 )
Orders are being processed by user & ( JH 832 )
Error when converting commission basis currency ( JH 833 )
Parameter manual entry in cust. of condition type & must be B or C ( JH 835 )
No number range interval has been maintained for coll.process.type '&' ( JH 836 )
Payer & has no payment method ( JH 837 )
Specify a payment method for payer & ( JH 838 )
Payment method will be deleted ( JH 841 )
Intended purpose for the bank details does not match the order data ( JH 842 )
You can only change new bank details ( JH 843 )
No collection authorization has been issued for the bank details ( JH 844 )
Bank details & & & already exist ( JH 847 )
Bank details & & & already exist in a different sales area ( JH 848 )
You cannot enter a payment method if you specify a payment card ( JH 849 )
No header output determination procedure maintained ( JH 875 )
No item output determination procedure maintained ( JH 876 )
Alternative business partners not admissible for one-time customers ( JH 881 )
Internal error: Errored parameter transfer ( JH 882 )
Internal error: Incorrect parameter transfer to &1 ( JH 883 )
No media customer data found for BP & ( JH 884 )
Order &1 is a 'legacy' order (origin = A, creation not possible) ( JH 886 )
No industry sector exists ( JH 887 )
No account could be determined for account key &1 ( JH 888 )
Account determination for the document item contains errors (long text) ( JH 901 )
Structure &1, field &2: External key check failed for value &3 ( JHA12 006 )
You cannot delete all advertisers ( JHA12 011 )
No suitable advertiser assignment for business partner assignment &1 ( JHA12 021 )
Item &1, partner &2, role &3: Invalid address number &4 ( JHA12 031 )
Conditions for billing dataset &1/&2/&3 cannot be modified ( JHA12 034 )
The system was unable to determine any billing items (long text) ( JHBO_BUSISM010 001 )
&1 is not a marketing campaign ( JHCRM 000 )
This marketing campaign does not exist ( JHCRM 001 )
The system was unable to determine any RFC destination for the CRM System ( JHCRM 002 )
No data found for mailing number & ( JHCRM 004 )
No logical system found for RFC destination &1 ( JHCRM 005 )
No pricing procedure has been defined for revenue object determination ( JHE 001 )
No revenue object was determined (Error reported by pricing ( JHE 002 )
No revenue object could be determined ( JHE 003 )
Revenue object document &1 does not exist ( JHE 004 )
Partner object was changed from &1 to &2 ( JHE 006 )
Revenue recognition category &2 only admissible for item type &1 ( JHE 008 )
SD number range interval missing in client-wide settings ( JHE 009 )
Internal order changed from &1 to &2 ( JHE 011 )
Cost center changed from &1 to &2 ( JHE 012 )
Component &1 changed from &2 to &3 ( JHE 013 )
A sched.line cannot be changed since revenue recognition has been perfrmd ( JHE 015 )
Deactivation not possible. Documents already exist in the system ( JHE 016 )
Issue for publication &1, edition &2 on publication date &3 is missing ( JHE 018 )
Document for SD reference number &1 does not exist ( JHE 019 )
No account determination procedure found for revenue distribution ( JHE 021 )
No account for unbilled receivabales for reconcil.account for payer &1 ( JHE 022 )
No revenue recognition lines generated for order &1 ( JHE 023 )
No revenue recognition lines for bill.dataset &1 in item &2 of order &3 ( JHE 024 )
No revenue recognition lines for item &1 in billing document &2 ( JHE 025 )
New G/L account & identified in billing document ( JHE 030 )
Rev.recognition cat.F must apply to entire item with the same currency ( JHE 032 )
No rev.distribution since reference document does not require acct det. ( JHE 047 )
No revenue recognition because control lines for the order are missing ( JHE 048 )
You cannot delete all advertisers ( JHGP 001 )
You cannot delete all box number recipients ( JHGP 002 )
You can only specify one box number recipient ( JHGP 040 )
Partner role &1 not defined for item type &2 and item category &3 ( JHGP 051 )
You can only assign one partner in role &1 ( JHGP 052 )
Do not replace the sold-to party with a one-time customer ( JHGP 074 )
Contact person & does not have a home or business address ( JHGP 101 )
Payment mthd &1 requires bank details with valid collection authorization ( JHGP 112 )
Delete the payment method for advertiser &1 in item &2 ( JHGP 121 )
Program error: Contact person active as SAP BP, function module &1 ( JHGP 141 )
Sold-to party cannot be modified (billing dataset already billed) ( JHGP 152 )
Advertiser &1 cannot be replaced by sold-to party &3 in item &2 ( JHGP 156 )
Item &1 contains at least one billing dataset that has been billed ( JH_PACKAGE 001 )
Item &1 contains at least one schedule line that cannot be modified ( JH_PACKAGE 002 )
Package &1 is not saleable on &2 ( JH_PACKAGE 005 )
Package item &1 cannot be split up ( JH_PACKAGE 006 )
Package &1 cannot be modified ( JH_PACKAGE 007 )
You cannot select a service item for packages with several advertisers ( JH_PACKAGE 113 )
Different sales document category in initial item and package item ( JH_PACKAGE 115 )
Values for item &1 (&2:&3) do not correspond to the admissible values ( JH_PACKAGE 301 )
Package elements for package &1 were generated successfully ( JH_PACKAGE 502 )
Unable to create the entire package &1 ( JH_PACKAGE 503 )
Package attributes are incomplete ( JH_PACKAGE 504 )
Not all default values were possible for at least one package element ( JH_PACKAGE 507 )
Package &1 was generated (check log "admissible values" is available) ( JH_PACKAGE 510 )
Package &1 was generated. (Not all package elements are complete) ( JH_PACKAGE 511 )
Items with credit card attributes cannot be assigned ( JH_PACKAGE 520 )
Package element item &1 is still incomplete ( JH_PACKAGE 701 )
You have already changed single publications ( JH_PUB_CHANGE 027 )
You have already made changes to the publication group ( JH_PUB_CHANGE 028 )
Change is not possible, publication changes have been made ( JH_PUB_CHANGE 044 )
Function locked by another user. Display possible ( JI 011 )
If postal code areas are relevant, please also specify PCode area variant ( JI 021 )
Relevancy of price data: Pricing must take place in the order ( JI 022 )
Please specify a determining function module for relevant customer fields ( JI 023 )
Determining function module superfluous without relevancy of cust.field ( JI 024 )
CAR category & does not exist (please check your entry) ( JI 051 )
No text maintained for CAR category & in language & ( JI 052 )
No text maintained for CAR category & in language & or & ( JI 053 )
CAR hierarchy type & does not exist (please check your entry) ( JI 054 )
No text maintained for CAR hierarchy type & in language & ( JI 055 )
No text maintained for CAR hierarchy type & in languages & or & ( JI 056 )
Default circulation audit category does not exist (please check entry) ( JI 057 )
No text maintained for CAR category default in language & ( JI 058 )
No text maintained for CAR category default in language & or & ( JI 059 )
CAR hierarchy version & & was not yet created ( JI 060 )
CAR hierarchy entry & & & & was not yet created ( JI 061 )
Circulation record with key &1 does not exist ( JI 062 )
Canonical key for circulation book is not unique ( JI 063 )
No circulation record found for canonical key ( JI 064 )
Sales orders blocked by user &1 ( JI 081 )
Inconsistency has occurred for order &1 ( JI 082 )
Order &1 item &2: Error during determination of basic category default ( JI 083 )
Cancellation due to exceeding tolerance limit for problem orders ( JI 091 )
Category & is used in a default value (please delete default first) ( JI 101 )
Category & is used in an order (please change the order first) ( JI 102 )
Category & is used in a hierarchy (please delete usage first) ( JI 103 )
Maximum discount can only be maintained for basic categories ( JI 104 )
Indicator 'Price zero allowed' can only be maintained for basic categ. ( JI 105 )
New basic category is not yet used in active hierarchies ( JI 106 )
Indicator 'Calc.unpaid category' can only be maintd for basic CAR categs. ( JI 107 )
A maximum of one 'calculated unpaid category' is allowed ( JI 108 )
Category & (calculated unpaid copies) should not be used in orders ( JI 109 )
Discount & is not between 0 and 100 (please correct entry) ( JI 110 )
Discount entered without comparison operation (please enter operator) ( JI 111 )
There is at least one hierarchy version for hier.type & (no deletion) ( JI 151 )
There is a SAPscript long text for hierarchy type & (deletion not poss.) ( JI 152 )
The new issue cannot be identified uniquely ( JI 163 )
Plant data cannot be identified uniquely ( JI 169 )
External issue management not defined for publication & ( JI 171 )
Issues exist after publication date &. APPEND function not allowed ( JI 173 )
Copy number & already exists for the edition ( JI 174 )
Planning already performed on publication date & for the edition (&/&) ( JI 175 )
Issue variant types incomplete ( JI 176 )
Entry & in table & does not exist for field & ( JI 177 )
Quantity and unit of measure incomplete for field & ( JI 182 )
The plant data does not correspond to the issue ( JI 189 )
At least one plant was transferred more than once ( JI 190 )
No issues exist after publication date &. Function INSERT not possible ( JI 195 )
The issue cannot be identified uniquely ( JI 196 )
No issues exist on publication date & ( JI 197 )
Publication date & does not correspond to copy number & ( JI 198 )
No issues exist for copy number & ( JI 199 )
Category & is not a basic category ( JI 201 )
Basic category & is not used in active hierarchy version & & ( JI 202 )
Non-calculation category & is not a basic category ( JI 203 )
Non-calculation category & is not defined for free order ( JI 204 )
Item type & not allowed - NP, KL and PP would be advisable (please check) ( JI 205 )
Categories & and & do not belong to same audit report type ( JI 206 )
Lower purchase quantity limit is higher than upper limit (please check) ( JI 207 )
Category & has an inadmissible audit report type (&) ( JI 208 )
Edition & (publication &, edition &, pub.date &) is a synch.media issue ( JI 214 )
Enter media issue with number and publication date ( JI 219 )
The publication date cannot be moved from & to & ( JI 221 )
Error determining progress status of issue ( JI 222 )
Media issue number & and publication date & do not match ( JI 236 )
Media issue & is not synchronized with M/SD. Function not possible ( JI 245 )
The publication date cannot be moved from & to & ( JI 249 )
Hierarchy type & already has another version starting on & ( JI 251 )
Start date & is before & (please check entry) ( JI 252 )
Hierarchy type version & & is used in a hierarchy (deletion not possible) ( JI 254 )
Order & is blocked by user & - no category determination for item & ( JI 271 )
Internal error while blocking - no category det. for order & item & ( JI 272 )
Order & item & - incorrect or incomplete order data ( JI 277 )
Order & item & - no audit report type found for media product ( JI 278 )
Order & item & - no cat. function module found for audit report type & ( JI 279 )
Category &3 was defined for order &1 item &2 ( JI 282 )
Order categorization performed (see log) ( JI 287 )
You do not have authorization to perform order categorization ( JI 289 )
Please enter to-date of delivery period or sales documents ( JI 291 )
Too many records selected. Resulting set restricted to & records ( JI 293 )
The category can no longer be changed for order item &/& ( JI 296 )
Category & does not correspond to audit report type & for item ( JI 297 )
A category cannot be assigned to itself at a lower level ( JI 301 )
A category for the draw cannot be assigned at a lower level ( JI 302 )
A category for the draw cannot be assigned at a lower level ( JI 303 )
Basic category & cannot be used as a higher-level category ( JI 304 )
Error occurred while saving activation indicator (notify system admin.) ( JI 305 )
Hierarchy is not consistent (see log) - no graphics display ( JI 306 )
Current hierarchy version is not blank, copying not possible ( JI 307 )
The hierarchy version to be copied is blank, copying not possible ( JI 308 )
Category & does not belong to audit report type & ( JI 309 )
Hierarchy contains unknown categories (please check) ( JI 310 )
Hierarchy checked is consistent (activation possible) ( JI 311 )
Hierarchy checked is not consistent (please see log) ( JI 312 )
Copy template does not belong to audit report type & ( JI 313 )
Activation not possible, hierarchy inconsistent (see log) ( JI 315 )
Activation carried out though hierarchy inconsistent (system error) ( JI 316 )
Not activated although hierarchy consistent - system error ( JI 317 )
Hierarchy successfully checked and activated ( JI 318 )
Activation failed, hierarchy inconsistent (system error) ( JI 319 )
Hierarchy is inconsistent, was activated (see log) ( JI 320 )
Hierarchy was deactivated and can now be edited ( JI 321 )
Please enter an allowed combination of country and postal code (F1) ( JI 351 )
Postal code & is not allowed for country & (please correct) ( JI 352 )
A postal code interval is only allowed within one country(please correct) ( JI 353 )
Interval: Lower limit >= upper limit not permitted (please correct) ( JI 354 )
New entry & overlaps with entry & (please correct) ( JI 355 )
Postal code area evaluation variant & is invalid (please correct) ( JI 360 )
Update unsuccessful for & order items ( JI 371 )
Select start of block ( JI 372 )
Select end of block ( JI 373 )
No daily audit statistics found (please check your entry) ( JI 401 )
'From' date of period should not be later than 'to' date ( JI 402 )
IS-M/SD deliveries locked by user & ( JI 405 )
You do not have authorization to update CAR statistics ( JI 406 )
CAR statistics locked by user & ( JI 407 )
Internal error occurred when locking on enqueue server ( JI 408 )
Daily CAR statistics are locked by user & ( JI 409 )
Please specify either a period or lead time in days ( JI 410 )
Either close or open audit period ( JI 411 )
SD delivery &V1& is blocked by user & ( JI 412 )
SD delivery &V1&, no header data found although item &V2& exists ( JI 413 )
SD delivery item &V1&, &V2&: delivered media issue &V3& not found ( JI 414 )
SD delivery &V1&, no header status data found ( JI 415 )
Order item &1 / &2: Error during search for postal data (PCode ...) ( JI 417 )
Circulation book update blocked by user &1 ( JI 421 )
Internal error occurred when locking on enqueue server ( JI 422 )
Deliveries locked by user &1 ( JI 423 )
Inconsistent data: Edition &1 / &2 not found for delivery &3 ( JI 427 )
Program &1 is not intended for an audit report type in the Cust.settings ( JI 428 )
Deliveries to plant/publication/edition &1/&2/&3 blocked by user &4 ( JI 429 )
Circulation book for issue &1 blocked by user &2 ( JI 430 )
Edition &1/&2, order item &3/&4 no audit report category ( JI 431 )
Order item &1 / &2: No price data found ( JI 432 )
Order item &1 / &2: Error during search for postal data (PCode ...) ( JI 433 )
Circulation book blocked by user &1 ( JI 441 )
Audit reports exist for data area for deletion, resulting in cancellation ( JI 443 )
Media issue &1, order item &2 &3 no audit report category ( JI 448 )
SD single copy order &1 &2: no price data found ( JI 449 )
Please specify at least one date interval ( JI 451 )
Publication/edition & / &: No relevant audit report quantities found ( JI 452 )
Program &1 is not intended for an audit report type acc.to Customizing ( JI 453 )
Error during number assignment (number range &, object &) ( JI 454 )
No address determined for order item &1/&2, date &3 ( JI 456 )
No ABC zone determined for order item &1/&2, date &3 ( JI 457 )
Closing selected audit period (reports created) ( JI 471 )
Opening selected auditing period (existing reports deleted) ( JI 472 )
Edition &1 &2: Report already exists for period &3 to &4 (period closed) ( JI 473 )
Edition &1 &2: Overlapping report from &3 to &4: No change ( JI 474 )
Edition &1 &2: Report created from &3 to &4 (period closed) ( JI 475 )
Edition &1 &2: Existing report from &3 to &4 deleted (period reopened) ( JI 476 )
Edition &1 &2: Overlapping report from &3 to &4 not changed ( JI 477 )
Edition &1 &2: No existing report found in period from &3 to &4 ( JI 478 )
Data on publication or edition will be ignored ( JI 501 )
Please specify edition key and publication ( JI 502 )
Please enter audit period or issue number and year number ( JI 503 )
Issue number/year number will be ignored ( JI 504 )
Edition can only be specified when one publication is selected ( JI 507 )
Please specify at least the publication or audit report number ( JI 508 )
Please select one product ( JI 509 )
Please specify a publication period or issue number/year number ( JI 510 )
You did not enter selection criteria for a publication ( JI 511 )
Please select a unique time ( JI 512 )
Please specify a selected time ( JI 513 )
Entries are only allowed for publication/edition or CAR number ( JI 525 )
No entries in table JSTKGSPRO for district municipality keys ( JI 528 )
Country is not same as that in district municipality key - please check ( JI 529 )
Address not found for BP &1 (date &2) ( JI 535 )
Error while reading schedule line &1 &2 &3 (ret.update of circ.book) ( JI 555 )
Circ.book record from legacy dataset not found (retr.update of circ.book) ( JI 556 )
Program &1 is not intended for audit report type &2 (edition &3/&4) ( JI 573 )
Unable to block orders ( JI 574 )
Circulation book for issue &1 blocked by user &2 ( JI 575 )
Return &1: Error reading issue &2 ( JI 576 )
Inconsistency occurred during reorganization ( JI 577 )
Sales area-independent hierarchy work area found ( JI 603 )
Booking unit &1 is not allowed ( JI 605 )
You do not have authorization to perform AR migration ( JI 703 )
&1 new entries generated in table JITSTATMT ( JI 705 )
&1 new entries were generated in table JITCIRCBOOK ( JI 706 )
&1 entries from table JITSTAT processed ( JI 707 )
&1 entries from table JITSTAT were selected ( JI 708 )
Internal error - please notify your system administrator ( JI 801 )
Customizing incorrect for audit report hierarchy (type &1, version &2) ( JIAUDIT 004 )
Distributed value &1 exceeds the value of item &2 (Overpayment) ( JIPM_BYTITLE 003 )
Payment amount &1 exceeds open residual amount &2 (Overpayment) ( JIPM_BYTITLE 004 )
Split item &1/&2: Payment amount was restricted to &3 (Overpayment) ( JIPM_BYTITLE 006 )
Split item &1/&2: Difference amount was reduced to &3 ( JIPM_BYTITLE 008 )
Payment amount was not distributed completely ( JIPM_BYTITLE 009 )
No split ledger defined for partial payments in company code &1 ( JIPM_BYTITLE 010 )
Split item is credited (please check) ( JIPM_BYTITLE 012 )
Associated partial payment items were not activated (please check) ( JIPM_BYTITLE 014 )
Split item without partial payment or residual item posting ( JIPM_BYTITLE 015 )
Note the restrictions in SAP Note 1330814 ( JIPM_BYTITLE 016 )
DataSource is not admissible for S+P product hierarchy ( JISMAM_BW 015 )
No objects assigned that can be closed ( JISMGEO 010 )
Extraction of orders on hand: Please specify one key date only ( JISMSD_BW 101 )
System unable to create JIT call or components group ( JIT00 002 )
The external status change you requested is not planned ( JIT00 003 )
The action requested is not permitted for the internal processing status ( JIT00 004 )
The external status information that was transferred cannot be converted ( JIT00 005 )
JIT material does not exist in the system ( JIT00 008 )
System error detected during (un)lock procedure: call &3, cust.&2, user&1 ( JIT00 010 )
Error during internal number assignment ( JIT00 015 )
No corresponding entry in table &1 ( JIT00 017 )
JIT customer &1 has not been found ( JIT00 019 )
JIT components group type &1 has not been found ( JIT00 020 )
JIT material &1 has not been found ( JIT00 021 )
Unable to determine sold-to party (&1 &2 &3) ( JIT00 022 )
Corresponding entry is already available in table &1 ( JIT00 025 )
No JIT components group type found for values specified ( JIT00 031 )
No JIT scheduling agreement determined for customer material &2 ( JIT00 032 )
No customer found for values specified ( JIT00 033 )
Generation of expanded dialog structures failed ( JIT00 039 )
Internal error in module &1 ( JIT00 043 )
Error occurred when shared buffer was being deleted ( JIT00 045 )
The objects you have selected cannot be deleted ( JIT00 047 )
Call &1 has not been found and can therefore cannot be processed ( JIT00 049 )
Material &2 not found for JIT customer &1 ( JIT00 050 )
Material &2 not defined specifically for JIT customer &1 ( JIT00 051 )
JIT call &1 cannot be created/changed - data incomplete ( JIT00 052 )
JIT material table cannot be reorganized ( JIT00 053 )
No records were deleted from the JIT material table ( JIT00 055 )
External status &1 is not available ( JIT00 056 )
Material master data cannot be accessed ( JIT00 057 )
Delivery could not be created ( JIT00 058 )
JIT material missing for call component with customer material &1 ( JIT00 060 )
No valid BOM has been found for the key date ( JIT00 061 )
For material &1, plant &2, production version &3 was not found ( JIT00 062 )
No BOM could be defined for material &1 ( JIT00 063 )
No BOM was specifically defined for material &1 ( JIT00 064 )
No lead times maintained for customer &1 plant &2 time &3 status &4 ( JIT00 070 )
No display variants found. ( JIT00 071 )
Please enter at least one of the identification criteria ( JIT00 074 )
Interlinked actions cannot contain the action as a part action ( JIT00 075 )
Changes to call header not possible (components group status) ( JIT00 077 )
Control profile &1 (internal calls, buffer area) does not exist ( JIT00 080 )
No summarized JC profiles have been created or assigned ( JIT00 081 )
SumJC profile &1 has not been found ( JIT00 082 )
An interlinked action cannot contain any interlinked sub-actions ( JIT00 083 )
Interlinked actions cannot be created for action &1 ( JIT00 084 )
Select all component groups for call &1 ( JIT00 090 )
The JIT customer cannot be changed ( JIT00 096 )
JIT calls still exist for components group type &1 ( JIT00 099 )
Reference number type &1 not defined ( JIT00 100 )
Delete all delivery items for the components group ( JIT00 107 )
The definition of the additional data should not be deleted ( JIT00 109 )
Components group types still exist for destination &1 ( JIT00 113 )
You are not authorized to perform this operation in some plants ( JIT00 114 )
Sold-to party &1 is blocked; see long text ( JIT00 151 )
Operation no blocked data; see long text ( JIT00 152 )
User configuration could not be saved ( JIT00 202 )
You have restricted the number of JIT calls displayed for the subscreen ( JIT00 207 )
Display variant &1 already exists and will be overwritten ( JIT00 210 )
Deleting the current variant takes you to basic settings of the graphic ( JIT00 211 )
You have not selected a components group ( JIT00 221 )
Data selection was limited to a maximum of &1 components groups ( JIT00 224 )
HU creation not scheduled (control profile &1) ( JIT00 281 )
Enter as many production lines as possible ( JIT00 302 )
Call up action &1 &2 by pressing F9 ( JIT00 304 )
There are no components groups for this customer on this line ( JIT00 307 )
Progress confirmation executed. Max.no.of entry units not yet complete. ( JIT00 309 )
Progress confirmation executed. Report next entry units with F9. ( JIT00 310 )
Progress report not possible because sequence has changed in the meantime ( JIT00 311 )
No executable actions found for JIT call control &1, status &2 ( JIT00 314 )
System could not find any actions that can be executed ( JIT00 315 )
Internal processing error &1 ( JIT00 319 )
Production version not found for material &1 and line &2 in plant &3 ( JIT00 320 )
You have not selected a components group ( JIT00 322 )
Invalid code &1 in creating print file: &2 ( JIT00 324 )
No special actions defined for status &1 ( JIT00 330 )
Plant &1 not defined ( JIT00 332 )
Time zone not maintained for plant &1 ( JIT00 333 )
Cannot be assigned uniquely: production number &3, customer &1, plant &2 ( JIT00 335 )
Check parameters (&1) ( JIT00 336 )
Repeat order without components not possible! ( JIT00 337 )
Call for external call no. &3 from customer &1, plant &2 not available ( JIT00 338 )
VCall for external call number &3 from customer &1 plant &2 inconsistent ( JIT00 339 )
No corresponding JIT materials found in rejected scheduling agreements ( JIT00 340 )
&1 Components groups without line assignment (e.g. ext. call number &2). ( JIT00 342 )
Unable to create unique delivery ( JIT00 350 )
No corresponding delivery schedule items found ( JIT00 353 )
JIT materials not transferred completely ( JIT00 356 )
Component group not found for &1 &2 &3 &4 ( JIT00 359 )
No user parameters defined for user &1 ( JIT00 360 )
No valid print mode defined for action &1 ( JIT00 361 )
Time zone &1 not found, no conversion ( JIT00 362 )
Time stamp &1, date &2, or time &3 inconsistent ( JIT00 363 )
Progress not confirmed due to system error when processing the lock ( JIT00 365 )
In sched.agreement &1 Combining indicator is missing for item &2 ( JIT00 366 )
The delivery quantity is not correct for sched.agreement &1 item &2 ( JIT00 369 )
JIT calls without JIT material master found for MATID &1 ( JIT00 370 )
Sort variant &1 not found or faulty. ( JIT00 381 )
Error while converting time stamps in time zone &1 ( JIT00 382 )
No display variant available for selection parameters ( JIT00 383 )
No authorization to carry out this operation. ( JIT00 384 )
No authorization to carry out this operation. ( JIT00 385 )
No suitable print control parameters found. ( JIT00 386 )
For material &1 no storage locations could be found for stock transfer ( JIT00 387 )
Time zone missing ( JIT00 390 )
Selection of external calls (SumJC) ( JIT00 391 )
Dialog processing is not permitted for external call items ( JIT00 394 )
Error code &1 on creating data file: &2 with structure &3 ( JIT00 396 )
Stock transfer in/out component group buffer not possible ( JIT00 399 )
JIT action was not carried out: transfer data not correct ( JIT00 402 )
Action not permitted: (call control &1, processing status &2, action &3) ( JIT00 403 )
Action &1 has not been defined ( JIT00 404 )
Internal table management error ( JIT00 405 )
Asynchronous posting of action has been triggered ( JIT00 406 )
You cannot execute the action from this transaction ( JIT00 407 )
Action &1 not permitted (ext.call no.:&2, proc.status: &4) ( JIT00 408 )
Call with external call number &1 could not be modified ( JIT00 409 )
Action &1 cannot be carried out within this transaction ( JIT00 410 )
You can only create a delivery for a selected customer ( JIT00 411 )
Backflush / goods movement of the call components not possible ( JIT00 413 )
Update of database change has been canceled ( JIT00 414 )
Processing status of components group could not be updated ( JIT00 415 )
Unable to create delivery for these JIT call components ( JIT00 416 )
Reorganization of JIT transaction data has been canceled ( JIT00 417 )
Printing of shop floor papers has been canceled ( JIT00 418 )
Components group(s) already delivered ( JIT00 419 )
Goods movement of call components not possible ( JIT00 420 )
Update in BW could not be carried out ( JIT00 421 )
It is not possible to switch components groups ( JIT00 422 )
Prerequisites for creating a handling unit have not been fulfilled ( JIT00 423 )
No delivery has been created ( JIT00 426 )
There is already a HU reference for at least one components group ( JIT00 428 )
At least one components group has not yet been delivered ( JIT00 429 )
Action &1 &2 is carried out &3 times - refresh ( JIT00 434 )
Error in backflush: multiple entries in JITBACKFTMP ( JIT00 436 )
Error during backflush; Note messages ( JIT00 450 )
Not all records could be deleted ( JIT00 453 )
Record could not be deleted ( JIT00 454 )
Complete confirmation not possible; select again ( JIT00 456 )
It was not possible to delete any records. ( JIT00 457 )
Call is archived and marked for deletion - no action possible ( JIT00 458 )
Action &1 cannot be carried out by user dialogs ( JIT00 459 )
Errors occurred in posting the goods movements ( JIT00 460 )
Update records for backflush partly locked ( JIT00 461 )
Data has been changed in the meantime; Select again ( JIT00 462 )
Delivery split does not allow additions to delivery ( JIT00 463 )
Call &3 contains no item with material &2 ( JIT00 464 )
Material &1 is included in the delivery more than once ( JIT00 465 )
Emergency correction, see details, reason: "&1" ( JIT00 467 )
GI has already been posted for this delivery ( JIT00 469 )
Call &3 already contains an item with material &2 ( JIT00 470 )
The shift sequence for working days is not maintained in shift sequences ( JIT00 475 )
You do not have authorization to carry out this operation ( JIT00 484 )
Repeat order for &1 &2 not possible; no JIT call available ( JIT00 501 )
JIT call already exists ( JIT00 503 )
You must specify an external status ( JIT00 505 )
This JIT call does not exist ( JIT00 506 )
Entries with same material and components group type grouped together ( JIT00 507 )
Material number not yet determined; data cannot be saved ( JIT00 508 )
Quantity is zero; data cannot be saved ( JIT00 509 )
Lines &1 and &2 describe the same component / components group ( JIT00 511 )
Data inconsistent for components of a components group (unloading point) ( JIT00 512 )
Choose a status that is possible for the repeat order in question ( JIT00 516 )
Repeat order status not possible here ( JIT00 517 )
Errors occurred when assigning components groups ( JIT00 518 )
Manual processing of call has been canceled ( JIT00 519 )
There are several calls for external call number &3 ( JIT00 520 )
You must specify an external status ( JIT00 522 )
Select a header line ( JIT00 523 )
Tip: Copy existing data to speed up data entry! ( JIT00 525 )
Repeat orders have been defined for this external JIT call number ( JIT00 526 )
Please specify components ( JIT00 527 )
Processing terminated - JIT call has since been changed ( JIT00 528 )
Date and time change if status changes ( JIT00 536 )
Time specified, but no date specified ( JIT00 537 )
You are trying to create a repeat order for a non existent JIT call ( JIT00 538 )
Data inconsistent for components of a comp. group: installation point ( JIT00 540 )
Data inconsistent for components of a comp.group: comp. group material ( JIT00 541 )
Data inconsistent for components of a components group: external status ( JIT00 542 )
Data inconsistent for components of a components group: date ( JIT00 543 )
Data inconsistent for components of a components group: time ( JIT00 544 )
Data inconsistent for components of a components group: internal status ( JIT00 545 )
IDoc foreground processing: JIT call already exists ( JIT00 546 )
IDoc foreground processing: JIT call already exists several times ( JIT00 547 )
You create a repeat order for a call ( JIT00 548 )
No production number has been entered in the IDoc or online ( JIT00 549 )
This JIT call cannot be changed to a repeat order ( JIT00 552 )
Create a new repeat order for external call number &1 ( JIT00 553 )
It is not possible to change a repeat order ( JIT00 554 )
Several calls exist. Do you want create a repeat order? ( JIT00 555 )
Error in checking the JIT call, see further error messages ( JIT00 556 )
Component data in a components group is inconsistent: grouping index ( JIT00 559 )
Call type for JIT customer &1 is not maintained ( JIT00 560 )
Component data in a components group is inconsistent: grouping info ( JIT00 567 )
Call type &1 is not maintained ( JIT00 569 )
Call type entered and call type of existing JIT call do not match ( JIT00 571 )
Maintenance view is changed to 'Discrete material/summarized JIT call' ( JIT00 575 )
Summarized JIT call delivery creation from index list is not supported ( JIT00 576 )
Material &3 occurs several times in components group &1 ( JIT00 579 )
IDoc &1 does not exist ( JIT00 580 )
Grouping information must be entered ( JIT00 581 )
Action &1 is an internal action ( JIT00 582 )
Action &2 is not permitted in the components groups ( JIT00 602 )
No entry could be found in table &1 ( JIT00 604 )
Deletion program has been canceled ( JIT00 605 )
Target quantity &1 of summarized JIT call &2 cannot be changed ( JIT00 606 )
More than &2 characteristics for field &1 ( JIT00 612 )
Combined stock transfer not possible ( JIT00 617 )
Stock transfer of handling units to different warehouses not possible ( JIT00 618 )
Components group transferred is not assigned to a handling unit ( JIT00 619 )
Scheduling agreement &1 with document type &2 has no delivery block ( JIT00 621 )
Summarized JIT call profile '&1' from call &2 is not defined ( JIT00 623 )
Only &1 components group calls checked, if necessary change parameters ( JIT00 624 )
Invalid grouping indicator in sumJC profile &1 ( JIT00 626 )
There are still open scheduling agreements for JIT customer &1 ( JIT00 627 )
For JIT customer &1 there are still components group types ( JIT00 628 )
There are still destinations for JIT customer &1 ( JIT00 629 )
No summarized JIT call available for delivery &1 ( JIT00 631 )
No packing transaction profile has been specified ( JIT00 632 )
Error in customer exit EXIT_SAPLJIT14_001 ( JIT00 634 )
Table MAT_DD_CT has incorrect structure ( JIT00 653 )
Enter documentation data for material &1 ( JIT00 655 )
Maintain components group material for components group type &1 ( JIT00 660 )
Backflush and BOM explosion for material &1 are irrelevant ( JIT00 662 )
Material &1 and material &2 have different storage locations ( JIT00 666 )
Select all components groups for handling unit &1 ( JIT00 668 )
Handling unit profile &1 does not exist ( JIT00 669 )
JIT call &1 contains items that have already been delivered ( JIT00 672 )
Several JIT control cycles exist for material &1 ( JIT00 755 )
JIT calls outbound have already been generated for the selected JIT calls ( JIT00 756 )
Call usages for LP &1 and JIT customer &2 do not match ( JIT00 801 )
Action &4 not possible (for int.call no. &1, customer &2, ext.call no.&3) ( JIT00 805 )
Incorrect call parameter(s) in external action control ( JIT00 810 )
Qualifier &1 not defined (object &2) ( JIT00 813 )
Production number tables are not available ( JIT00 816 )
A general error occurred during the logistic quantity adjustment ( JIT00 817 )
For material &1 there is already JIT scheduling agreement &2 ( JIT00 829 )
Material &1 cannot be deleted (see long text) ( JIT00 830 )
For material &1 there are several JIT uncanceled scheduling agreements ( JIT00 831 )
No components group has been found with identical call component ( JIT00 832 )
Action &4 not possible (for int.call no. &1, customer &2, seq. no. &3) ( JIT00 836 )
No JIT calls were found for the production numbers ( JIT00 840 )
No components groups to be matched were found ( JIT00 841 )
Production number &1, CG type &2 has already been matched ( JIT00 842 )
No JIT call was found for production number &1 ( JIT00 843 )
No summarized JIT call deliveries found for reference &1 ( JIT00 844 )
Variances f. default delivery qty &1 from generated dely qty &2 (call &3) ( JIT00 845 )
You cannot change item &1 ( JIT00 847 )
Item has no reference to a JIT call ( JIT00 848 )
Default Del.Qty &1 <> gen.del. qty &2. completed acc. to profile(call &3) ( JIT00 850 )
Not all data records could be archived ( JIT00 888 )
Delivery &1 is no longer open ( JIT00 893 )
Automatically packed calls cannot be delivered gradually ( JIT00 894 )
Differnet call types when adding to deliveries (DELU) ( JIT00 895 )
There are no open deliveries ( JIT00 898 )
In components group &2 the unloading point is different in action DELU ( JIT00 899 )
Error during internal number assignment ( JITOUT 001 )
The delivery confirmations selected no longer exist ( JITOUT 005 )
Select incomplete delivery confirmations only ( JITOUT 006 )
Delivery confirmation &1 has already been sent ( JITOUT 007 )
Action not executed because delivery confirmation has changed ( JITOUT 009 )
Each vendor can only have one incomplete delivery confirmation ( JITOUT 010 )
Time definition &1 has not been found ( JITOUT 013 )
Action &1 is only inbound-relevant ( JITOUT 018 )
JIT call does not match vendor &1 ( JITOUT 019 )
Call does not match internal processing status &1 ( JITOUT 020 )
More than one JIT call was found for external call number &1 ( JITOUT 021 )
Call (internal call number &1, vendor &3) is locked ( JITOUT 101 )
System error while (un-)locking a call ( JITOUT 102 )
Production supply area &1 in plant &2 has not been found ( JITOUT 103 )
No source list entry found ( JITOUT 104 )
Specify an outline agreement number in source list ( JITOUT 105 )
You do not have the authorization to execute this action ( JITOUT 107 )
No source list entry exists for material &1 in plant &2 ( JITOUT 108 )
Control cycle &1 is not a JIT control cycle ( JITOUT 109 )
No call type could be determined for number &1 ( JITOUT 110 )
There are still JIT Outbound Calls for Control Cycle &1 ( JITOUT 111 )
Item &2 of scheduling agreement &1 is not suitable for JIT calls ( JITOUT 112 )
No goods receipt can be posted for scheduling agreement item &1 &2 ( JITOUT 113 )
Call &1 contains call items relating to different warehouse numbers ( JITOUT 115 )
Error when reading storage location control ( JITOUT 117 )
Inconsistency in the plant data ( JITOUT 118 )
Inconsistency in the storage location data ( JITOUT 119 )
Inconsistency between JIT call and generated transfer order ( JITOUT 121 )
Source list entry is not a scheduling agreement ( JITOUT 123 )
Transfer order (warehouse &1, transfer order &2) locked ( JITOUT 124 )
System error occurred during (un-)locking ( JITOUT 125 )
Call &1 locked ( JITOUT 126 )
System error occurred during (un-)locking ( JITOUT 127 )
Vendor is locked; see long text ( JITOUT 150 )
There are no JIT outbound calls among the selected calls ( JITOUT 301 )
No message has been created for outbound call &1 to vendor &2 ( JITOUT 302 )
Error during message generation ( JITOUT 303 )
Call profile &1 not found ( JITOUT 304 )
IDoc for components group &1 to vendor &2 has already been sent ( JITOUT 305 )
Select all JIT calls for material document &1 ( JITOUT 307 )
No output partner could be found for components group &1 ( JITOUT 309 )
Goods receipt posting is not possible with differing call types ( JITOUT 310 )
Message for component group &1 to supplier &2 already generated ( JITOUT 311 )
Goods receipt can only be canceled for sequenced JIT call ( JITOUT 313 )
Components group &1 missing for delivery confirmation &2 item &3 ( JITOUT 314 )
Transfer data for executing action is not correct ( JITOUT 401 )
Selection limit has been reached ( JITOUT 403 )
Delivery &1 has not yet been processed completely ( JITOUT 407 )
Error while posting goods movements; Posting was not carried out ( JITOUT 501 )
No IDOCs have yet been found for the selected calls ( JITOUT 502 )
No goods receipt has been booked yet by &3 &4 for requirement time &1 &2 ( JITOUT 511 )
Maintain the tolerance profile & ( JITOUT 514 )
No IDoc has been created for delivery confirmation &1 from vendor &2 ( JITOUT 602 )
No data has been found for delivery confirmation ( JITOUT 603 )
Delivery confirmation &1 to vendor &2 has status 'sent' ( JITOUT 606 )
Vendor & has an invalid source list entry ( JITOUT 801 )
Goods receipt posting for summarized JIT call &1 is not possible ( JITOUT 802 )
Part GR already posted. For additional GR postings use transaction PJWE ( JITOUT 804 )
Replenishment strategy &1 does not exist in plant &3 ( JITOUT 806 )
Change to delivery date is valid for the entire JIT call ( JITOUT 807 )
Cancelation of goods receipt is not possible for summarized JIT call &1 ( JITOUT 808 )
Available quantity from stock determination is too small ( JITOUT 809 )
Available quantity from batch determination is too small ( JITOUT 810 )
No JIT calls exist for this material document ( JITOUT 811 )
GR posting for SumJC &1 &2 must be done with reference to a confirmation ( JITOUT 812 )
Inconsistent data for JIT call &1 ( JITOUT 820 )
Transfer order not (completely) confirmed ( JITOUT 821 )
Not all transfer orders for call &1 have been confirmed ( JITOUT 822 )
Transfer order &3 in warehouse number &2 was processed ( JITOUT 823 )
Not all transfer orders for call &1 have been canceled ( JITOUT 825 )
Transfer order &3 in warehouse number &2 not processed ( JITOUT 826 )
Inconsistent WM data ( JITOUT 827 )
Inconsistent JIT outbound data ( JITOUT 828 )
Inconsistent WM data ( JITOUT 829 )
No summarized JIT call was found for delivery &1 &2 ( JITOUT 833 )
Replenishment strategy type for control cycle for stock transfer changed ( JITOUT 838 )
Booking unit & already exists ( JJ 002 )
Booking unit & does not exist ( JJ 003 )
Booking unit group & does not exist ( JJ 006 )
Reference BU is not of the same type ( JJ 008 )
Entry &, &, ISSUE TYPE & & overlaps with the previous entry ( JJ 025 )
No BU hierarchy of type & valid on & was found ( JJ 041 )
The booking unit & already exists in one of the sales hierarchy versions ( JJ 044 )
No active BU hierarchy version found of type & in period & to & ( JJ 047 )
Entry & & with overlapping period already exists ( JJ 055 )
No content components exist in booking unit & on & ( JJ 059 )
Booking unit & is not published on the given dates ( JJ 060 )
&1 content component not published in &2 BU on the selected dates ( JJ 068 )
The valid-from date & is later than the valid-to date & ( JJ 069 )
& & outside content component hierarchy version date & ( JJ 070 )
& & is not in period for higher level ( JJ 098 )
Please delete existing ad insert elements first ( JJ 099 )
Template BU does not have same use ( JJ 100 )
Insufficient publication dates for the number required ( JJ 102 )
No lower level booking units assigned ( JJ 107 )
No & active with this variant ( JJ 109 )
Difference in structural hierarchy variant - copying not possible ( JJ 118 )
Difference in price hierarchy variant - copy will be made ( JJ 119 )
Booking unit & is still being used in a valid order ( JJ 125 )
Booking unit &1 is not valid for item type &2 ( JJ 126 )
Booking unit &1 can no longer be sold on &2 ( JJ 127 )
Changing structure hierarchy variant not allowed -> see long text ( JJ 128 )
Nodes do not exist in the hierarchy, copying is not possible ( JJ 134 )
Please only select sub-trees with at least one lower level cont.comp. ( JJ 135 )
Date rule &1 could not be read ( JJ 139 )
The element you entered already exists ( JJ 141 )
Contract & between purch.organization & and sales agent & already exists ( JJ 153 )
Block unsuccessful: & requirements could not be copied ( JJ 154 )
Please specify a requirement type ( JJ 158 )
At least one requirement has an unsuitable validity period (long text) ( JJ 164 )
You must enter at least one inclusion element ( JJ 167 )
Only quantity dependent commission can be increased ( JJ 170 )
Standard settings have not been maintained for purchasing organization & ( JJ 172 )
The changed sales activity type has an effect on existing contracts ( JJ 177 )
Error occurred while reading positioning type & ( JJ 184 )
No positioning data can be maintained for BU & at schedule line level ( JJ 185 )
No positioning data can be maintained for BU & at sub-item level ( JJ 186 )
No entries marked as relevant to generation ( JJ 187 )
Change content per IsVar.type/PU variant type not allowed -> see long txt ( JJ 196 )
Booking unit & is marked for deletion ( JJ 197 )
Booking unit & is marked for deletion ( JJ 198 )
Content component & does not exist (please check your entry) ( JJ 201 )
Content component $ already exists ( JJ 202 )
Content component $ flagged for deletion ( JJ 203 )
Content component $ marked for deletion ( JJ 204 )
Template content component $ does not exist ( JJ 205 )
There should be at least one use for each content component ( JJ 206 )
Cont.component w/o sales area restriction: Cannot access sales area scrn ( JJ 207 )
Sales area $/$/$ does not exist. Please check your entry ( JJ 208 )
Sales area $/$/$ already created for content component ( JJ 209 )
Sales area $/$/$ not created for content component ( JJ 210 )
Sales areas will be deleted if cont.comp.is valid for all sales areas ( JJ 211 )
Inconsistencies determined in sales areas for content component & ( JJ 215 )
Error while deleting sales areas for content component & ( JJ 216 )
Content component & has already been blocked by user & ( JJ 221 )
Content components have already been blocked by user & ( JJ 222 )
No content component & exists below content component & ( JJ 224 )
Identical cont.components exist more than once on the first hier.level ( JJ 230 )
Identical content components exist more than once in a sub tree ( JJ 231 )
There is no space in the booking unit & on the dates determined ( JJ 235 )
Error occurred when interpreting date information ( JJ 236 )
Booking unit &1 is not valid for the current sales area &2/&3/&4 ( JJ 237 )
Production unit & already exists for basic booking unit & on & ( JJ 238 )
PU & with copy number & already exists for basic booking unit & ( JJ 239 )
Unauthorized call up of collective entry/processing of content components ( JJ 242 )
Content component & does not exist in the selection entries ( JJ 245 )
Sales area details are only allowed for a selected content component ( JJ 248 )
Cursor is positioned on a blank line. Sales area details not possible ( JJ 249 )
Content component & in collective entry is not unique. Please correct ( JJ 250 )
Cursor position invalid. Sales area details and doc. mgmt not possible ( JJ 251 )
No sales area exists for the selection entries ( JJ 252 )
Please select content components before executing the function ( JJ 253 )
Cursor is positioned on a blank line. Content compts cannot be deleted ( JJ 254 )
Cursor positioned incorrectly. Content component cannot be deleted ( JJ 255 )
No content components exist for the selection entries ( JJ 261 )
No external number assignment set up. Collective entry not possible ( JJ 262 )
Content component does not exist as a first level node in the hierarchy ( JJ 264 )
If booking unit update is required, please enter templates ( JJ 266 )
Templates/booking unit/content component do not exist ( JJ 267 )
No date-specific template booking unit/content components exist ( JJ 268 )
Planned circulation quantities for &1/&2 cannot be moved from &3 to &4 ( JJ 270 )
Date-specific capacities for &1 cannot be moved from &2 to &3 ( JJ 271 )
Unauthorized call up of content component hierarchy maintenance/display ( JJ 282 )
Root node & is assgnd at a lower lev. in the template (ty.& var.& vers.&) ( JJ 298 )
Content component & is not a structural content component ( JJ 299 )
CComp & has no structural use. Hierarchy level 2 not allowed ( JJ 300 )
CComp & not used for price. Hierarchy level 2 not allowed ( JJ 301 )
CComp & does not have statistical use. Hierarchy level 2 not allowed ( JJ 302 )
There are cont.comps on level 2 of the hierarchy template w/o.struct. use ( JJ 304 )
There are cont.comps on lev. 2 of the hier. template, not used for price ( JJ 305 )
There are cont.comps on level 2 of the hierarchy template w/o.stat.use ( JJ 306 )
Template (type &, var.&, vers.&) has repeated use. Not allowed here ( JJ 307 )
Special publications not at level 2 of the structural hierarchies ( JJ 311 )
&1 &2 could not be deleted from requirement &4 in sales agent contract &3 ( JJ 360 )
Entry is not unique ( JJ 366 )
No authorization for activity & in sales area & & & ( JJ 367 )
Only one default booking unit can be entered for BU &1 ( JJ 368 )
Specify a business partner ( JJ 381 )
Date & is invalid ( JJ 382 )
From-date cannot be later than to-date ( JJ 383 )
Error when creating business partner & ( JJ 384 )
Same super/subordinate business partner not possible ( JJ 385 )
The hierarchy node cannot be deleted ( JJ 386 )
Please do not enter a percentage value equal to zero ( JJ 387 )
Selected business partner does not exist ( JJ 388 )
BP hierarchy has been locked by another user. Changes are not possible ( JJ 389 )
System error when blocking tree ( JJ 390 )
No business partner hierarchy exists for the key date & ( JJ 391 )
Please do not enter a percentage value greater than 100 ( JJ 392 )
From-date is later than key date, rel.does not appear on current tree ( JJ 393 )
From-date cannot be earlier than the selection date ( JJ 394 )
Time slice already exists: Bpsub: & Dat_frm: & Dat_to & ( JJ 395 )
TO_DATE must not be earlier than selection date ( JJ 396 )
FROM_DATE is earlier than higher level relationship, new time slice ( JJ 397 )
Changes cannot be made in the past ( JJ 398 )
Time slice already exists: Bpsup: & Bpsub: & Dat_frm: & Dat_to & ( JJ 399 )
The 'from date' must not be earlier than the selection date ( JJ 400 )
No relationship was selected ( JJ 403 )
The BP cannot be selected ( JJ 404 )
Validity period is not between &1 and &2 ( JJ 406 )
The validity period of the elements was adjusted ( JJ 412 )
The element validity is outside the requirement validity ( JJ 413 )
Validity end &2 defined for &1 elements ( JJ 416 )
Elements overlap: Insertion is not possible (long text) ( JJ 417 )
Elements in the clipboard have a different requirement type (long text) ( JJ 418 )
Page format & does not exist ( JJ 451 )
Fixed format for page/column format & and format proposal & not found ( JJ 452 )
Error calling the technical system with destination & ( JJ 471 )
System error in technical system ( JJ 472 )
No editor maintained for design ad type & and BU & ( JJ 473 )
Cannot read front-end ID ( JJ 474 )
No destination maintained for technical system &1 and front-end ID &2 ( JJ 475 )
BU grouping positioning system & does not exist ( JJ 476 )
The technical interface has not been maintained in the current clients ( JJ 477 )
No order update system was found for sales area &/&/& ( JJ 478 )
No destination has been maintained for technical system & ( JJ 479 )
No technical system has been maintained for positioning information ( JJ 480 )
Specify a contact ( JJ 556 )
Please remove the standard indicator in contract &1 first ( JJ 639 )
The sales agent code ID & does not exist ( JJ 658 )
No condition type has been maintained in the customizing table TJJ73 ( JJ 659 )
No entries exist in the system table TJJ75 ( JJ 660 )
Requirement type &1: Will be skipped due to missing entries ( JJ 662 )
Requirement type &1: Required field &2: The field is initial ( JJ 663 )
Requirement type &1: Required field &2: The table is initial ( JJ 664 )
Requirement type &1: &2 valid contract requirements ( JJ 665 )
Requirement type &1: &2 suitable contract req. without inclusive element ( JJ 666 )
Requirement type &1: &2 contract req.to be checked with excluded element ( JJ 667 )
Requirement type &1: &2 excluded contract requirements ( JJ 668 )
Requirement type &1: &2 assigned contract requirements ( JJ 669 )
Contract req. &1: No longer found ( JJ 670 )
Contract req.&1: Validity start date &2 after &3 ( JJ 679 )
Contract req.&1: Validity end date &2 before &3 ( JJ 680 )
Contract req. &1: Invalid commission category: &2 ( JJ 681 )
Contract req. &1: The assignment was deleted due to errors ( JJ 683 )
Contract req. &1: Assignment is correct and will be retained ( JJ 684 )
Requirement type &1: &2 suitable contract req.without element ( JJ 685 )
Further checking of requirement types not performed due to cancel.indic. ( JJ 686 )
Contract req. &1: Check manual change ( JJ 687 )
Contract req.&1: Requirement type &2 no longer exists. ( JJ 689 )
Contract req. &1: No sales activity found ( JJ 691 )
Contract req. &1/sales activity &2: Start of validity period &3 before &4 ( JJ 692 )
Contract req. &1/sales activity &2: End of validity period &3 before &4 ( JJ 693 )
Contract Req. &1/Sales act.&2: SAct.type &3 is not suitable for SAt.ty.&4 ( JJ 694 )
Contract req. &1/Sales activity &2: The sales activity was added ( JJ 695 )
Contract req. &1/sales activity &2: The sales activity was modified ( JJ 696 )
Contract req. &1/ Sales activity &2: Sales activity was deleted ( JJ 697 )
Contract req. &1: Was skipped due to sales activity data ( JJ 698 )
Contract req. &1: Was kept for commission type &2 without being checked ( JJ 699 )
Contract req. &1: No sales activity occured with BP &2 ( JJ 712 )
Preliminary requirement would produce circular requirements ( JJ 716 )
Preliminary requirement &1 does not have any elements ( JJ 717 )
You are deleting all elements of a requirement which is part of a chain. ( JJ 718 )
Extra commission &3 '&4' cannot be granted (see long text) ( JJ 720 )
Form &1 does not exist in program &2 ( JJ 730 )
AI elements must be defined as homogeneous districts, geo.units or routes ( JJ 752 )
The AI elements were saved without check ( JJ 764 )
Checks were successful ( JJ 772 )
Public.,Edit w/o printing works in the elem. <> BBU. Please save again ( JJ 774 )
No PSD deliveries exist for this selection ( JJ 775 )
No PSD deliveries exist for this edition ( JJ 776 )
Entry &: Customer group can only be specified for postal ship.del.type ( JJ 777 )
Entry &: Either distr./geo.unit/route or generic entries ( JJ 778 )
Entry &: If carrier route/del.type defined, must have del.type home del. ( JJ 779 )
Entry &: Postal ship./direct delivery obligatory for geo.unit/del.type ( JJ 780 )
Entry &: If geo.unit/customer grp specified, you must also spec.del.type ( JJ 781 )
Additional specific entries are not required for a generic entry ( JJ 782 )
The AI elements were saved without being exploded ( JJ 783 )
Elements saved in spite of missing M/SD delivery viability for &1 ( JJ 784 )
Rules for defining AI M/SD elements ( JJ 785 )
Please specify reference publication and reference edition ( JJ 786 )
Please specify the positioning system grouping ( JJ 787 )
Please specify publication, edition and printing works ( JJ 788 )
The validity period does not overlap with the filter period ( JJ 791 )
The content component is of an inadmissible type ( JJ 792 )
No document flow exists for object & & & & ( JJ 802 )
This function is only possible for log entries with reference object ( JJ 805 )
You cannot navigate in the current document ( JJ 806 )
Existing BU hierarchy work areas were deleted ( JJBE 003 )
No BU variant type dataset maintained for AI (JJTBEVRGRP) ( JJBE 108 )
No variant types for ad inserts have been maintained (TJJ59) ( JJBE 109 )
Display variant &1 does not exist ( JJBE 110 )
No planned AI circulation quantity for BU &1, processing type &2, date &3 ( JJBE 111 )
No planned distribution qty for BU &1, distribution qty type &2, date &3 ( JJBE 112 )
Booking unit &1 cannot be booked for &2 ( JJBE 202 )
Conversion to a positioned AI selectively booked combi.BU not possible ( JJBE 213 )
Copying not possible. Not all BUs are published for the new date ( JJBE 214 )
Copying not possible. New BUs are published for the new date ( JJBE 215 )
Repeat insert ship.preps for public.&1, edition &2, print.works &3 for &4 ( JJBE 251 )
Repeat TMC shipping preparations for &1 ( JJBE 252 )
Repeat distribution shipping preparations for &1 ( JJBE 253 )
This function is only possible for combined booking units ( JJBE 301 )
Use transaction JHB1 to start the report ( JJBE 401 )
Use transaction JHB10 to start the report ( JJBE 402 )
Sold-to party &1 cannot be copied (error &2 &3) ( JJCAMP 007 )
Error in PC upload of file & & & (rc = & ) ( JJPRDH 001 )
Operating system (OPSYS) &1 is not assigned to any syntax group (FILESYS) ( JJPRDH 008 )
No restriction possible due to the modification indicator ( JJPRDH 061 )
You are not authorized to change the modification indicator ( JJPRDH 071 )
One or more records cannot be changed because of the modification ind. ( JJPRDH 072 )
Product hierarchy (S&&P) is not active ( JJPRDH 200 )
The customer solution from SAP SI AG does not exist in the system ( JJPRDH 301 )
&1 &2 with value &3 is not admissible (access sequence &4) ( JJ_PACKAGE 046 )
&1 &2 &3 mandatory field &4 does not contain an entry ( JJ_PACKAGE 052 )
&1 &2 &3 with value &4 is not unique ( JJ_PACKAGE 053 )
&1 &2 unit of measure &3 is not suitable for booking type &4 ( JJ_PACKAGE 054 )
&1 &2 unit of measure &3 is not suitable for service number &4 ( JJ_PACKAGE 056 )
&1 &2 &3 with &4 does not match the other item categories in the package ( JJ_PACKAGE 058 )
Customer order & locked by user & ( JK 007 )
Locking by system not possible at present ( JK 008 )
The document does not contain any items ( JK 010 )
Please determine the campaign framework first ( JK 011 )
Please specify the sales source ( JK 012 )
Sales agent & is not a reader ( JK 019 )
Please maintain the promotion data for item & ( JK 021 )
Business partner & has order block & & ( JK 023 )
Sales document type & must not be used ( JK 024 )
You cannot change the ship-to party ( JK 026 )
Service type for billing was changed ( JK 027 )
No delivery viability set found for the specified parameters ( JK 028 )
Mix offer & & & & does not exist ( JK 030 )
Change to item period, please check schedule lines ( JK 035 )
No changes to this item are allowed ( JK 036 )
No changes to this schedule line are allowed ( JK 037 )
Termination of WBZ subscription & cannot be reversed ( JK 041 )
Please mark one line as a default value for & & & ( JK 042 )
Billing block & (&) is transferred to the item ( JK 043 )
Business partner & has billing block & ( JK 044 )
Billing schedule & does not exist (please check your entry) ( JK 045 )
Billing procedures not maintained for publication & ( JK 047 )
Billing frequency & does not exist (please check your entry) ( JK 048 )
Billing arrangements do not exist for calendar & and publication & ( JK 049 )
Internal error (please notify the administrator responsible) ( JK 050 )
Overlapping delivery viability sets (please notify administrator respon.) ( JK 051 )
Delivery of item is only viable from & ( JK 052 )
Please specify an address ( JK 056 )
Please specify an edition ( JK 057 )
Please specify a delivery type ( JK 058 )
Please specify a mix type ( JK 059 )
Item & cannot be deleted as a subsequent item exists ( JK 060 )
Item & cannot be deleted as billing has already taken place ( JK 061 )
Item & cannot be deleted as it has already been delivered ( JK 062 )
Schedule line & cannot be deleted as a subsequent one exists ( JK 063 )
Schedule line & cannot be deleted as it has already been packed ( JK 064 )
Unlimited changes to this item are not allowed ( JK 065 )
Unlimited changes to this schedule line are not allowed ( JK 066 )
No payment method exists for country & ( JK 067 )
Address of BP & cannot be supplied using delivery type & ( JK 068 )
& is not a publisher ( JK 070 )
& is not an external publisher ( JK 071 )
Only publications from publisher & are allowed (please check entry) ( JK 072 )
The trial item must be limited ( JK 074 )
Enter either value days or a value date ( JK 075 )
Please specify only your own editions ( JK 077 )
Please specify only third-party editions ( JK 078 )
Please specify the sales agent/service company ( JK 084 )
Calendar & is already assigned billing frequency & ( JK 085 )
Delivery type & cannot be used for orders ( JK 086 )
Please save the order first (please see long text) ( JK 088 )
Item cannot end on & ( JK 091 )
Ship-to party is not an unloading point ( JK 094 )
A schedule line already exists with service type & ( JK 097 )
Please flag either delivery or schedule line ( JK 098 )
Release of a change number is currently running - save not possible ( JK 099 )
Renewal should not be selected for an initial introduction ( JK1 001 )
Restart cannot be selected for initial introduction ( JK1 002 )
Change of payment method cannot be selected for initial introduction ( JK1 003 )
Billing method cannot be selected for initial introduction ( JK1 004 )
Service type cannot be selected for initial introduction ( JK1 005 )
Delivery type change cannot be selected for initial introduction ( JK1 006 )
Please specify at least one classification for the event ( JK1 007 )
Sub-items cannot be deleted ( JK1 034 )
Select the weekdays in the sub-items for group & ( JK1 035 )
Address alternation not possible for order type &, publication & ( JK1 037 )
Unlimited change not possible for one main sub-item ( JK1 039 )
Limited changes already exist in the future for item &1 ( JK1 052 )
Deviating attributes in backdated shipping ( &1, &2 ), (&3, &4 ) ( JK1 058 )
Validity of trial/free item modified successfully ( JK1 061 )
Item &1 already has an unlimited change with a future date ( JK1 063 )
Order deadline set in the meantime for &1 &2 &3 ( JK1 100 )
The item contains several introduction records (overview) ( JK1 101 )
The mix offer cannot be used with sales document type & ( JK 111 )
Function not possible for this item ( JK1 113 )
Payments for payer & must be entered by means of payment lot ( JK1 114 )
Billing date in legacy system changed - check ( JK1 116 )
No matching contract account found for payer &1 ( JK1 119 )
An unlimited change already exists for a subitem ( JK1 121 )
Enter termination data for item &1 ( JK1 127 )
Unable to determine tax jurisdiction code for ship-to party &1 ( JK1 134 )
Item &1 results from change of publication, used in termination ( JK1 135 )
Delivery viability parameters changed, adjusting attributes ( JK1 139 )
An overlapping change has been billed to &1 ( JK1 230 )
Country & is not assigned to a country grouping for shipping costs ( JK 135 )
Data exists on shipping order and BP addresses - sel. criteria not met ( JK1 355 )
Data exists on shipping order and M/SD order - sel. criteria not met ( JK1 358 )
The item must be limited if you specify a delivery end reason ( JK 137 )
The new schedule line is before &1; change the selection period ( JK1 370 )
The item cannot be deleted as it has already been terminated ( JK 138 )
No employees can be specified for service company & ( JK 139 )
Specify & ( JK 140 )
The item is not limited ( JK 144 )
You must specify a bank connection for payment method & ( JK 147 )
Insert zone & could not be exploded ( JK 160 )
Alternative payer not allowed with this data constellation ( JK1 601 )
Items already exist for insert zone & and the carrying issue ( JK 161 )
The maximum number of inserts is exceeded ( JK 163 )
Please specify only your own editions ( JK 164 )
No inserts allowed for the carrying issue ( JK 165 )
No bank connection is required for payment method & ( JK 169 )
The item will be delivered normally from & ( JK 174 )
Collective transfer only poss.for payment via bank and w/o VAT liability ( JK 177 )
A schedule line already exists from & to & ( JK 179 )
Please specify delivery round for carrier route & ( JK 181 )
Shipping preparation has already taken place for this issue ( JK 183 )
Drop-offs exist on distribution date for ad pre-print issue ( JK 184 )
No delivery type exists yet for ad pre-print distribution ( JK 185 )
No delivery type exists yet for delta coverage ( JK 186 )
Ad pre-print not available for delivery in carrier route & ( JK 187 )
Item & cannot be deleted ( JK 190 )
The ad pre-print is already used in order & ( JK 191 )
Carrying issue is not available for delivery in all carrier routes ( JK 193 )
Carrying issue is not available for delivery in geo.unit specified ( JK 194 )
No rounding factors exist for ad pre-prints ( JK 195 )
The ad pre-print is not available for dist. in the geo.unit specified ( JK 196 )
No carrier routes/geo.units found that are available for delivery ( JK 197 )
No item deleted ( JK 199 )
No carrier routes available for delivery were found ( JK 205 )
Item cannot be terminated until & (order finalization deadline) ( JK 206 )
Unloading point & is not valid ( JK 212 )
Caution: Item is no longer available for delivery from & ( JK 216 )
Please set 'Perform termination' indicator ( JK 217 )
Terms of payment not required for payment method & ( JK 218 )
Item & cannot be deleted as commission settlement was already performed ( JK 219 )
Sales office responsible was not found ( JK 220 )
Carrier route & has a lock flag ( JK 222 )
Geographical unit & has a lock indicator ( JK 223 )
You are not authorized to create an item for document type & in & & & ( JK 224 )
You are not authorized to create a free item in & & & & ( JK 225 )
Orders were updated ( JK 226 )
The item is not limited ( JK 227 )
Item & does not have an unloading point, delivery type & ( JK 229 )
The subsequent sales document type & is invalid ( JK 230 )
Complaint sales document type & is invalid ( JK 231 )
Offer type or subsequent sales document type of the offer is inconsistent ( JK 232 )
Offer has already been transferred to order & ( JK 233 )
Do you want to terminate the item early? (minimum subscription &) ( JK 237 )
Payer & is not a customer (create business partner) ( JK 239 )
Item & cannot be deleted (order acceptance deadline) ( JK 240 )
No issues exist after & - please check your entry ( JK 241 )
Schedule line & cannot be deleted as billing already performed ( JK 242 )
Caution: Please check the quantity (warning limit = &) ( JK 243 )
Reference document does not have the appropriate sales document type ( JK 250 )
Reference document contains a different business partner ( JK 251 )
Template document & contains terminated items ( JK 252 )
Offer items are in the past ( JK 254 )
The 'billed to' date in the legacy system is initial ( JK 256 )
Data transfer not possible for sales document type & ( JK 257 )
The 'billed to' date is before the start of calculation ( JK 258 )
An error correction cannot be deleted (see long text) ( JK 264 )
An extra copies order cannot be deleted (see long text) ( JK 265 )
Please specify a logistical delivery type (see long text) ( JK 266 )
Credit memo will be transferred during next payment run (see long text) ( JK 267 )
Redirection is not relevant for billing (free standard item) ( JK 268 )
Caution: Relocation abroad on & (permanent change required) ( JK 269 )
Order deadline is incomplete for publication & (&) ( JK 270 )
Order deadline not maintained in full ( JK 271 )
Order deadline not maintained in full ( JK 272 )
Partial suspension of this item is not allowed ( JK 273 )
Caution: Shipping block will be set for gift ( JK 276 )
Address is not recognized in item period ( JK 279 )
Item & was not yet terminated ( JK 280 )
Item & cannot be deleted - last item ( JK 282 )
Change of address will be sent to WBZ company (see long text) ( JK 283 )
Caution: Long run time ( JK 284 )
You cannot specify a sales agent/gift (please delete your entry) ( JK 286 )
You cannot specify a sales agent for sales source & (delete your entry) ( JK 287 )
Item ends on & - minimum length of subscription to & ( JK 288 )
Sales agent's subscription ends before & (commitment period) ( JK 289 )
Home delivery quantity in item & will be initialized ( JK 290 )
Insertion in carrying issue can only take place on & (accep. deadline) ( JK 291 )
Ad pre-print can be delivered on & at the earliest - order deadline ( JK 292 )
Ad pre-print can be distributed on & at the earliest - order deadline ( JK 293 )
Order deadline not maintained for total market coverage ( JK 294 )
Function not possible ( JK 301 )
Document & is a & ( JK 303 )
Maximum quantity not maintained for sales doc. type & and sales area & ( JK 309 )
Payment arrangement is already being transferred from a different item ( JK 310 )
& & has been saved ( JK 311 )
Order items before & cannot be copied ( JK 313 )
Document & is no longer valid in the selection period ( JK 316 )
Number of business partners read was limited to 50 ( JK 317 )
Please flag one indicator for the authorized business partner ( JK 321 )
The item type already exists ( JK 322 )
Please specify the screen sequence group ( JK 324 )
Sales source & requires a campaign framework (please check your entry) ( JK 325 )
The indicator 'data transfer active' is not selected (gen.parameters) ( JK 326 )
Sales document type & cannot be deleted since orders still exist ( JK 330 )
Sales document type & cannot be deleted since assignments exist ( JK 331 )
Item type & cannot be deleted since items exist ( JK 332 )
Item type & cannot be deleted since assignments exist ( JK 333 )
Item type & cannot be deleted since a where-used list exists ( JK 334 )
Sales document type & - item type & assignment cannot be deleted ( JK 335 )
Schedule line type & cannot be deleted since schedule lines exist ( JK 336 )
Schedule line type & cannot be deleted since assignments exist ( JK 337 )
Schedule line type & cannot be deleted since a where-used list exists ( JK 338 )
Sales document type & - item type & assignment does not exist ( JK 339 )
& copies are delivered. Terminating all copies ( JK 340 )
& copies are delivered. Redirecting all copies ( JK 341 )
The maximum delivery suspension was exceeded ( JK 342 )
The item can only be delivered until & ( JK 347 )
Please position the cursor on a trial item ( JK 348 )
Only standard items can be restarted ( JK 349 )
Please position the cursor on a free item ( JK 350 )
Necessary data missing for item & ( JK 351 )
Document & is a & ( JK 355 )
Insert zone must be exploded for total market coverage ( JK 356 )
Item & cannot be deleted since returns exist ( JK 358 )
Item & cannot be deleted since retroactive calculation was performed ( JK 359 )
Item cannot be reversed since it was already terminated ( JK 360 )
Item & cannot be reversed since billing was already performed ( JK 361 )
Only original items or redirections can be reversed ( JK 362 )
Item & cannot be reversed since commission settlement was performed ( JK 363 )
Item & was already reversed; reversal reason: & ( & ) ( JK 364 )
Item & cannot be reversed, subsequent item exists ( JK 365 )
The item cannot be reversed as it was not saved ( JK 367 )
Please save the order first (please see long text) ( JK 368 )
Order item is not relevant for billing ( JK 371 )
Order item is now relevant for billing ( JK 372 )
Billing will not be performed for order item (calculation period) ( JK 373 )
No audit report type for edition & & ( JK 374 )
Combination of shipping outsorting not possible ( JK 375 )
No delivery type found for backdated shipping ( JK 377 )
Item cannot be delivered retroactively to & ( JK 378 )
Please select one type of documents for transfer only ( JK 380 )
Process input file in full or in part? ( JK 382 )
Parallel processing only allowed in background ( JK 385 )
Restart not possible for input file (initial transfer not yet performed) ( JK 386 )
Input file & already transferred ( JK 388 )
The session name for this input file should be &. Please correct. ( JK 391 )
Termination cannot be reversed (retroactive accounting performed) ( JK 397 )
Termination cannot be reversed (order deadline past) ( JK 399 )
Total partial suspension quantities greater than standard quantity ( JK 401 )
Total partial suspension quantities greater than standard quantity ( JK 402 )
Total of error corrections is greater than standard quantity ( JK 403 )
The item must be limited, regular delivery not possible ( JK 404 )
Relocation of business partner & already recorded in address mgmt ( JK 405 )
Schedule line quantity 1 not possible, partial suspension exists ( JK 407 )
The termination reversed must first be saved ( JK 413 )
Billing cannot be performed completely for item ( JK 419 )
Billing cannot be performed for item at end of calculation ( JK 420 )
Caution: Relocation abroad on & (permanent change required) ( JK 425 )
Termination transferred to WBZ company (see long text) ( JK 428 )
Issue does not exist before &. Please extend item ( JK 430 )
& is not a date on which publication & & is published (please check) ( JK 431 )
The end of billing is invalid (see long text) ( JK 433 )
The start of the item must be in the past ( JK 439 )
No schedule lines that can be changed for item & in this period ( JK 445 )
Item overlaps with a schedule line from the previous item ( JK 446 )
The previous item is only valid from & ( JK 447 )
The previous item is only valid to & ( JK 448 )
The item overlaps with a change to the previous item ( JK 449 )
Schedule line overlaps with a change to the previous item ( JK 452 )
Schedule line overlaps with a change to the previous schedule line ( JK 453 )
The item cannot be shortened this much ( JK 454 )
The schedule line cannot be shortened this much ( JK 455 )
No schedule lines that can be changed in this period ( JK 456 )
Change is not in the validity period for the item ( JK 458 )
The item cannot be shortened this much ( JK 459 )
The item can only start on & (order acceptance deadline) ( JK 461 )
The item can only start on & (order acceptance deadline) ( JK 462 )
The item can end on & at the earliest (order acceptance deadline) ( JK 463 )
Please record a day change for & (long text ...) ( JK 464 )
Please record a day change for & (long text ...) ( JK 465 )
The error correction quantity must not exceed & (long text ...) ( JK 466 )
The item can no longer be extended (order acceptance deadline) ( JK 472 )
Billing performed for basic delivery - create external error correction ( JK 473 )
Billing performed for item on & ( JK 474 )
Payer & is locked - bank data cannot be maintained ( JK 475 )
Commission clawback indicator was removed ( JK 501 )
Commission clawback indicator selected ( JK 502 )
Billing not performed for item & - no retroactive change necessary ( JK 506 )
Backdated change must be before & (order deadline) ( JK 507 )
Billing already performed for period after & ( JK 508 )
Reference document & does not contain items that can be copied ( JK 510 )
Combination of basic billing data and schedule line maint.variant invalid ( JK 512 )
New audit report category will be determined (see long text) ( JK 513 )
No info view defined in user parameters for user & ( JK 514 )
Item can begin on & at the earliest ( JK 515 )
The item can end on & at the earliest ( JK 516 )
Delivery type & is a direct delivery - this is not allowed here ( JK 518 )
Please specify reason for cancellation of delivery ( JK 519 )
Item cannot be shortened - please terminate ( JK 520 )
Billing is no longer performed for the order item ( JK 522 )
Business partner & is locked - address maintenance not possible ( JK 525 )
Overlap in item flow of item & ( JK 526 )
Delivery would only be viable until & for item being created ( JK 547 )
In order &, WBZ parameters &, &, & are already in use ( JK 566 )
File & already exists ( JK 570 )
System still contains & unprocessed records for comp.center & and date & ( JK 579 )
Ad pre-print processing is performed fully in IS-M/AM ( JK 609 )
Output determination not maintained for prom.rebate outbound processing ( JK 610 )
Allowed return quantity & exceeded ( JK 613 )
Please select either billing relevancy or expiration date relevancy ( JK 616 )
Please choose BP role (duplicate check) or create a new one ( JK 622 )
Order type & cannot be used (not subscription) ( JK 624 )
No payment card data required for payment method & ( JK 628 )
Period prices are critical in orders with liability account ( JK 630 )
Specify sales agent first ( JK 633 )
Please specify the commitment period ( JK 636 )
Period & - & was assigned unloading point & (please check) ( JK 637 )
No business partner found for social insurance number & ( JK 638 )
General parameters for renewal control not fully maintained ( JK 648 )
Data on initial introductions cannot be deleted ( JK 649 )
Item cannot be split, not limited ( JK 650 )
Item cannot be split, new address ( JK 651 )
Item cannot be split, new unloading point ( JK 653 )
Specify the sales agent ( JK 656 )
Commission recipient & was already assigned ( JK 657 )
Select one sales agent as main sales agent ( JK 658 )
Record for agency services cannot be deleted, commission sett. performed ( JK 659 )
Unable to delete all selected gifts ( JK 661 )
Unable to delete all selected commission recipients ( JK 662 )
Unable to delete record on agency services, gift shipped ( JK 663 )
Please specify the time unit for the liability period ( JK 665 )
Please specify the liability period ( JK 666 )
Please specify the percentage rate for commission for SC & ( JK 675 )
Sales agent & already recorded as an agent in the table ( JK 676 )
Data on agency services already recorded, create new record? ( JK 677 )
Item & already terminated: change of publication not possible ( JK 681 )
New item will be backdated, regular delivery from & ( JK 683 )
Automatic debit in renewal subs.only possible with individual transfer ( JK 684 )
Caution: New jurisdiction code on & (make unlimited change) ( JK 686 )
Suspension not possible at end of delivery ( JK 689 )
Records not processed are deleted when data is saved (file &1) ( JK 690 )
Publication & cannot be used (no issue account assignment) ( JK 692 )
A subsequent item for which billing was performed already exists ( JK 698 )
Manual credit memo will be ignored ( JK 699 )
Customer complaint already exists ( JK 708 )
Complaint date cannot be in the future ( JK 715 )
Please position cursor on line with checkbox ( JK 716 )
No delivery exists for return period & to & ( JK 729 )
No items found in return period & to & ( JK 740 )
No right of return ( JK 749 )
Return frequency & cannot be deleted since issue variant type assigned ( JK 750 )
There is no issue variant type for return frequency & ( JK 751 )
Return period & not maintained ( JK 752 )
No authorization for all orders ( JK 755 )
Audit report already made for returns - no changes allowed ( JK 759 )
Release not possible - all orders released ( JK 765 )
Release not possible for & orders - please repeat release ( JK 766 )
One order locked by user & - release not performed ( JK 767 )
The selected orders were released ( JK 768 )
Billing lock set - release procedure must be carried out ( JK 772 )
Suspension or no delivery on complaint date ( JK 781 )
Item already reversed (please see long text) ( JK 782 )
Complaint cannot be created without schedule lines ( JK 784 )
Please enter area code without * ( JK 785 )
Please enter telephone number ( JK 786 )
The number of selected orders is too large. Please delimit further ( JK 787 )
Returns can no longer be deleted ( JK 790 )
Complaint not in purchase period - only subsequent delivery possible ( JK 791 )
No order found in reference document from legacy system & ( JK 792 )
You cannot perform a search using the WBZ company only ( JK 795 )
You cannot perform a search using the payer/wholesaler only ( JK 796 )
No schedule line in order for return frequency & ( JK 799 )
Function not possible since there is no sales doc.type for free subs. ( JK 805 )
Carrier substitution: & & & Reason: & ( JK 813 )
Carrier substitution for & but no active carrier assigned ( JK 814 )
Shipping date in carrier info earlier than soonest possible date ( JK 815 )
Batch input session & generated for & selected distribution orders ( JK 822 )
No distribution order (quantity > 0) selected. No session created ( JK 823 )
Internal error (please notify system administrator) ( JK 824 )
Printing not allowed here. Dialog processing follows selection ( JK 826 )
Background processing not allowed. Dialog processing follows ( JK 827 )
Distribution quantity exceeds the maximum quantity of & units ( JK 828 )
& distribution orders not included because currently in process ( JK 829 )
Transfer distribution already performed for selected sales area on & ( JK 830 )
Only date, lead days or automatic determination allowed ( JK 831 )
Please specify either date, lead days or automatic determination ( JK 832 )
Business partner & does not have a company ID number in country & ( JK 835 )
Publication & is an ad pre-print. Only titles are allowed ( JK 836 )
Function was already carried out for publication & on & ( JK 841 )
Internal error (please notify system administrator) ( JK 845 )
No retail order schedule line (quantity > 0) selected. No session created ( JK 846 )
Batch input session & created for & selected retail order schedule lines ( JK 847 )
Please specify a date or choose automatic date determination ( JK 848 )
Business partner & does not have a company ID number ( JK 849 )
Sales document statistics group & not found (please check entry) ( JK 850 )
Text for sales doc.stats group & not found in language & ( JK 851 )
Text for sales doc.stats group & not found in languages & or & ( JK 852 )
No definition found for update group with key & for document header ( JK 853 )
No definition found for update group with key & for document item ( JK 854 )
No definition found for update group with key & for deliveries ( JK 855 )
Update group with key & not found for document header ( JK 856 )
Update group for document item not found with key & ( JK 857 )
Update group for delivery (header) not found with key & ( JK 858 )
No definition found for update group with key & for delivery-order assgmt ( JK 859 )
Update group for delivery-order assignment not found with key & ( JK 860 )
Country of departure & only allowed for chain transactions ( JK 866 )
& JJTBEPART records are incomplete (cannot be transferred) ( JK 869 )
& records transferred, & records not transferred (because incomplete) ( JK 870 )
All JJTBEPART records are complete (can be transferred) ( JK 871 )
Termination: Order data inconsistent (VBELN: &, POSNR: &) ( JK 872 )
Complaint quantity cannot be a subset ( JK 874 )
Subsequent delivery quantity cannot be a subset ( JK 875 )
Do not select clawback for commission clawback type 0 ( JK 878 )
Schedule line & cannot be deleted - change selection period ( JK 879 )
Billing frequency cannot be shortened this much ( JK 891 )
The basic delivery was replaced: create an external error correction ( JK 894 )
Changes on liability account, save order first ( JK 895 )
No billing document/billing index found: &1/&2/&3 ( JKACCOUNT 020 )
A change can lead to inconsistencies in the assigned orders ( JKACCOUNT 024 )
No billing index can be generated for renewal subscription ( JKACCOUNT 025 )
Order &1 does not have a liability account ( JKACCOUNT 032 )
Order & has liability account type &. Analysis not possible. ( JKACCOUNT 033 )
Currency change only allowed for orders with liability accounts ( JKACCOUNT 034 )
Order deadline not specified for delivery &1 ( JKACCOUNT 038 )
Amortization not in chronological order ( JKACCOUNT 039 )
Account key not assigned for refund type &1 ( JKACCOUNT 042 )
Enter a valid write-off date for the goodwill deliveries ( JKACCOUNT 103 )
Write-off not possible, since credit memo in liability account (long txt) ( JKACCOUNT 106 )
Order deadline not set completely for &1 on &2 ( JKACCOUNT 301 )
Deliveries locked by user &1 ( JKACCOUNT 302 )
Liability account for sales order &1 locked by user &2 ( JKACCOUNT 303 )
Orders are being processed by user &1 ( JKACCOUNT 305 )
The deliveries were amortized up to &1 ( JKACCOUNT 309 )
Publication &1 was not active in IS-M on &2 ( JKACCOUNT 312 )
Order &1/&2, cycle &3: Transfer has already taken place ( JKACCOUNT 320 )
Order &1/&2, cycle &3: amortization not possible --> See long text ( JKACCOUNT 322 )
Deliveries not yet amortized on &1 ( JKACCOUNT 323 )
Order &1/&2, cycle &3: error while generating billing index ( JKACCOUNT 324 )
Netchange records exist for &1 on &2 (see long text) ( JKACCOUNT 327 )
Order &1/&2: 1st copy not yet amortized ( JKACCOUNT 328 )
Order &1/&2, cycle &3: billing document already transferred ( JKACCOUNT 329 )
Order &1/&2, cycle &3: Credit memo from complaint to liability account ( JKACCOUNT 331 )
Document type determination not maintained for liability account transfer ( JKACCOUNT 407 )
Only transfer types 1 - 3 are possible with termination (check entry) ( JKACCOUNT 410 )
No recipient order for transfer type &, please remove ( JKACCOUNT 413 )
Unable to determine expiration date for order & & ( JKACCOUNT 416 )
Error occurred while generating transfer index for order & & ( JKACCOUNT 420 )
Recipient order already terminated with transfer type & ( JKACCOUNT 421 )
Recipient order already terminated on &. Transfer not possible ( JKACCOUNT 422 )
Liability account not found: &1/&2/&3 ( JKACCOUNT 423 )
Error while determining accounting document number for &1/&2/&3 ( JKACCOUNT 425 )
Cycle &1/&2/&3: Error in billing index for transfer to customer ( JKACCOUNT 426 )
Only transfer types 1 - 2 are possible for termination (check entry) ( JKACCOUNT 427 )
Cycle &1/&2/&3 is from data transfer ( JKACCOUNT 428 )
Transfer billing document not created for customer &1 -> amount &2 &3 ( JKACCOUNT 429 )
Transfer has already taken place for the subsequent cycle &1 / &2 / &3 ( JKACCOUNT 432 )
Reverse retroactive billing document &1 ( JKACCOUNT 437 )
Tax conditions different in donor and recipient orders ( JKACCOUNT 438 )
Subsequent transfers of type 3 exist for recipient order &3/&4 ( JKACCOUNT 442 )
The deliveries were amortized up to &1 ( JKACCOUNT 501 )
Order &1/&2 cycle &3 - incoming payment exists ( JKACCOUNT 601 )
Order &1/&2 cycle &3 - billing already performed for order item ( JKACCOUNT 602 )
Order &1/&2 cycle &3 - revenue has already been updated ( JKACCOUNT 603 )
Order &1/&2 cycle &3 - inconsistent amounts determined ( JKACCOUNT 604 )
Incorrect entry for the sales area ( JKBADCUST 002 )
A payment card of the type procurement card is not allowed ( JKCC 001 )
The card category could not be determined from card &1 &2 ( JKCC 002 )
Incorrect destination for performing authorization ( JKCC 003 )
Checking group &1 has not been defined ( JKCC 005 )
The payment card has expired ( JKCC 006 )
Please assign a checking group to billing type &1 ( JKCC 007 )
This payment card is only valid for &1 more day(s) ( JKCC 008 )
Please assign a checking group to billing type &1 ( JKCC 010 )
No payment card maintained in billing document &1 ( JKCC 011 )
Payment by payment card is not allowed for sales document type &1 ( JKCC 012 )
The system could not determine an account for card &1 &2 &3 ( JKCC 014 )
Control missing for account &1 ( JKCC 015 )
Assign an account determination procedure to billing type & ( JKCC 016 )
Billing document &1 was not authorized successfully ( JKCC 020 )
No response received from clearing house ( JKCC 021 )
Advance authorization must not be carried out for billing document &1 ( JKCC 025 )
G/L account for payment card claims does not exist ( JKCC 027 )
Payment card encryption is not active ( JKCC 036 )
Distribution error message does not exist for the complaint order ( JKCOMPL 001 )
Order &1 is a complaint ( JKCOMPL 002 )
Order &1 is a return ( JKCOMPL 003 )
Bank details &1 &2 &3 are blocked and cannot be used ( JKCOMPL 009 )
Billing block &1 will be copied into the complaint ( JKCOMPL 013 )
Error during preparation for pricing ( JKCOMPL 014 )
The complaint issues were redetermined ( JKCOMPL 015 )
Text contains formatting ( JKCOMPL 016 )
Billing lock set - release procedure must be carried out ( JKCOMPL 017 )
Complaint period must not be in the future ( JKCOMPL 019 )
Inadmissible complaint period ( JKCOMPL 020 )
Payer &1 is not a customer ( JKCOMPL 026 )
You are not authorized to use the function called up ( JKCOMPL 027 )
Complaint not possible for this order item ( JKCOMPL 028 )
Complaint not allowed without complaint issues ( JKCOMPL 029 )
The system has set the date category to 'Date' ( JKCOMPL 031 )
Complaint cannot be deleted since billing cycle complete ( JKCOMPL 033 )
Subsequent delivery quantity smaller than order quantity ( JKCOMPL 034 )
Complaints are not allowed for main items ( JKCOMPL 035 )
Enter bank details for payment method &1 ( JKCOMPL 038 )
Unable to save complaint - see long text ( JKCOMPL 039 )
The complaint category will be changed by the system ( JKCOMPL 041 )
Specify the order item ( JKCOMPL 042 )
You entered a complaint period of &1 days ( JKCOMPL 045 )
Inconsistent payment data ( JKCOMPL_ES 030 )
No space for new number &1. Please renumber first ( JKD 008 )
The sales document type must have sales document category &1 or &2 ( JKD 013 )
Entry &1 is not possible for transaction type &2 ( JKD 017 )
Optimization is not possible if only &1 values are entered ( JKD 018 )
No mix offer found for mix type ( JKD 021 )
Better delivery viab. parameter exists: Edition/mix type/del.type (&1) ( JKD 023 )
Delivery type for backdated shipping was changed: (&1) -> (&2) ( JKD 026 )
Output must be created during optimization for WBZ subscriptions ( JKD 030 )
Several addresses for order &1: Optim. only poss. in part during test run ( JKD 031 )
Caution: Certain data on the orders will be deleted ( JKEXT 006 )
Inconsistent order: &1/&2 (table &3) ( JKREMIND 000 )
No issues found from &1 to &2 for order &3 ( JKREMIND 014 )
Please perform billing first for cycle &3 for item &1/&2 ( JKREMIND 016 )
Please maintain only number of offset days or copies within a procedure ( JKREMIND 030 )
Offset days and copies cannot be combined ( JKREMIND 032 )
Function 'Suspension' is already selected at level & ( JKREMIND 037 )
Function 'Termination' is already selected at level & ( JKREMIND 038 )
Level & is the first level. Please select function 'Renewal offer' ( JKREMIND 039 )
Renewal offer at level & is not allowed ( JKREMIND 042 )
Account determination analysis not possible for renewal cycle &1 ( JKREMIND 064 )
Account determination for cycle & did not result in changes ( JKREMIND 065 )
Suspension not possible on &1. Reason: see message long text ( JKREMIND 091 )
Termination not possible on &1. Reason: see message long text ( JKREMIND 092 )
Logging all monitored orders may create a large volume of data ( JKREMIND 094 )
Cycle &3 for item &1/&2 has not been fully billed ( JKREMIND 202 )
Renewal control only possible with monetary liability account ( JKRENEW 004 )
Only chargeable subscriptions can have liability account ( JKRENEW 005 )
Unable to determine amortization procedure ( JKRENEW 011 )
Unable to determine amortization plan for item & (&) ( JKRENEW 012 )
Error in billing frequency, delivery account (please check entry) ( JKRENEW 013 )
Pricing procedures & and & must be marked as net procedures ( JKRENEW 014 )
Pricing procedures & and & must both be gross or net ( JKRENEW 019 )
Billing frequency & not allowed for sales document type & ( JKRENEW 020 )
No campaign framework found. Sales source &1 is not suitable for an offer ( JKRENEW 021 )
Billing recalculation only possible for renewal subscriptions ( JKRENEW 025 )
No authorization for processing of inbound payments (document: &) ( JKRENEW 118 )
Unable to process inbound payments in IS-M/SD: & / & ( JKRENEW 119 )
Payment amount and purchase price do not correspond: & / & / & ( JKRENEW 120 )
Unable to generate workflow for inbound payments error: &/& ( JKRENEW 121 )
Payer of order item and FI customer are not the same: &/& ( JKRENEW 122 )
Document &/& from inbound payments cannot be assigned to an IS-M/SD doc. ( JKRENEW 123 )
No offer found for order & / & / & ( JKRENEW 124 )
The payment amount for & / & was already posted to the liability account ( JKRENEW 125 )
Please perform billing first for cycle & ( JKRENEW 131 )
Assignment number changed and offer already accepted: & / & ( JKRENEW 132 )
Unable to reverse incoming payment: & / & ( JKRENEW 134 )
Unable to undo reversed incoming payment: & / & ( JKRENEW 135 )
Restart deadline past: &/& ( JKRENEW 146 )
FI reversal document was changed. Accept order manually: &/& ( JKRENEW 150 )
Commission settlement block missing in general parameters for renewal ( JKRENEW 151 )
Comp.code for incoming payment does not correspond to sales org. in order ( JKRENEW 153 )
Reversal not possible, subsequent TU exists: &/& FI-> & ( JKRENEW 154 )
Order &1/&2: Open cycle &3 without payment (delete cycle) ( JKRENEW 156 )
Different order currency: &/& ( JKRENEW 157 )
Order item already completed: &/& ( JKRENEW 158 )
Order changes exist - please save first ( JKRENEW 160 )
Item blocked to prevent further renewal; function not possible ( JKRENEW 161 )
Recal. not possible, cycle exists with advance billing doc. &1 &2 &3 ( JKRENEW 164 )
Reversal deadline exceeded for order & / & ( JKRENEW 165 )
Payment cannot be accepted, expiration date unlimited in &1/&2 ( JKRENEW 166 )
Recalculation not possible, since type 4 liability acct transfer found ( JKRENEW 167 )
Sales source and sales promotion in offer &1 differ from order &2 ( JKRENEW 168 )
Target cycle & must be open or simulated ( JKRENEW 174 )
Target cycle & does not contain a suitable payment ( JKRENEW 175 )
Payment &1 cannot be deactivated ( JKRENEW 179 )
Item cannot be accepted since no inbound payments found ( JKRENEW 205 )
Error occurred while accepting offer ( JKRENEW 208 )
Unable to determine monitoring procedure for billing frequency & ( JKRENEW 209 )
Monitoring block is not active ( JKRENEW 213 )
An incoming payment was already received. Please modify payment method ( JKRENEW 216 )
Unable to determine expiration date ( JKRENEW 218 )
Item changed - please modify renewal offer if necessary ( JKRENEW 220 )
Offer cannot be accepted - no payments exist ( JKRENEW 221 )
Recalculation is not possible ( JKRENEW 223 )
Payment method changed; now modify renewal offer if necessary ( JKRENEW 225 )
Order item & & completed ( JKRENEW 227 )
Offer & cannot be deleted, renewal not completed ( JKRENEW 228 )
Incorrect payment after change of publication: redirect payment ( JKRENEW 229 )
An open incoming payment exists for order & ( JKRENEW 232 )
Billing arrangements were to be changed on &1 ( JKRENEW 234 )
Reverse billing document & first ( JKRENEW 240 )
Transfer billing document & to Financial Accounting ( JKRENEW 241 )
Advance billing indicator removed, billing will be reversed ( JKRENEW 242 )
Advance billing indicator selected; billing document will be generated ( JKRENEW 243 )
Advance billing does not make sense for payment method & (-> Long text) ( JKRENEW 244 )
Potential revenue not found for cycle & ( JKRENEW 257 )
Unlimited change to offer not possible ( JKRENEW 259 )
Payment method cannot be changed in renewal subscription &1 &2 ( JKRENEW 261 )
Order w/del.-related liab.acct: data on liability account required ( JKRENEW 308 )
Publication date of first and last issues amortized cannot be initial ( JKRENEW 319 )
Publication date of first and last issues amortized must be the same ( JKRENEW 320 )
Publication date of last issue amortized must be later than that of first ( JKRENEW 321 )
Order &1/&2: Bonus item exists after actual end of delivery ( JKRENEW 363 )
Issue variant type & exists several times in template interval ( JKSD 011 )
Error while saving. Not all data was saved. ( JKSD 013 )
No data for this selection ( JKSD 024 )
Subsequent deliveries can only be created for the active version ( JKSD 044 )
Deleting subsequent deliveries for all versions ( JKSD 045 )
Quantity delivered for contract &1 &2 media issue &3 cannot be changed ( JKSD 047 )
Blocked quantity for contract &1 &2 media issue &3 cannot be changed ( JKSD 048 )
Locked quantity for contract &1 &2 media issue &3 cannot be changed ( JKSD 049 )
Subsequent delivery for contract &1 &2 already has orders ( JKSD 056 )
Orders can only be generated for the active version ( JKSD 058 )
Contract &1 &2 and issue &3 cannot be used as a template ( JKSD 072 )
Order exists for contract &1, &2 and issue &3 ( JKSD 078 )
Quantity planning locked due to cross-DC status &2 of media issue &1 ( JKSD 081 )
Warning: Media issue &1 has cross-DC status &2 for quantity planning ( JKSD 082 )
Quantity planning locked due to DC-spec. status &2 of media issue &1 ( JKSD 083 )
Warning: Media issue &1 has DC-specific status &2 for quantity planning ( JKSD 084 )
Fixing interval already exists ( JKSD 107 )
Fixing object with media issues already exists for date interval ( JKSD 110 )
Fixing with date already exists for media issue interval ( JKSD 111 )
Specify template media product and media issue ( JKSD 113 )
Specify target media product and media issue ( JKSD 114 )
Select one media product only ( JKSD 115 )
Unable to copy business partner &1 (more than one contract) ( JKSD 116 )
Contract &1, item &2, was not copied to target contract &3, item &4 ( JKSD 117 )
Version & not allowed for automatic creation of planning records ( JKSD 119 )
Template contract &1, item &2, was not copied ( JKSD 121 )
Delivery too late for media issue &1 and contract &2, &3 ( JKSD 144 )
Assortment contract is invalid ( JKSD 146 )
Next delivery date for customer is too late for issue &1 ( JKSD 147 )
Delivery sequence not found for specified parameters ( JKSD 149 )
Fixed quantity planning only allowed for chronological delivery sequences ( JKSD 187 )
No material master data found that corresponds to selection criteria ( JKSD 190 )
Partner index of deliveries will not be updated for sold-to party ( JKSD 288 )
Partner index of deliveries will not be updated for ship-to party ( JKSD 289 )
Order type determination is not defined for subsequent deliveries ( JKSD 312 )
Number range interval &1 &2 has not been maintained ( JKSD 329 )
Number range interval &1 &2 is not internal ( JKSD 330 )
Number range object &1 has not been maintained ( JKSD 331 )
Unable to determine standard role for role grouping &1 ( JKSDBPFAST 019 )
Request number is not unique ( JKSDCOLLECTION 054 )
Issue &1 plant &2: Item category is initial ( JKSDCOLLECTION 077 )
No recall dates defined for BP &1 ( JKSDCOLLECTION 103 )
Contract already scheduled for ship-to party &1 and media product &2 ( JKSDCONTRACT 001 )
Unable to find contracts that can be scheduled or that are scheduled ( JKSDCONTRACT 003 )
Contract validity is outside selection period ( JKSDCONTRACT 013 )
Quantity transfer of summarized returns not supported ( JKSDCONTRACT 103 )
Specify which logs are to be selected ( JKSDCONTRACT 110 )
Media product &1 will not be archived ( JKSDDEMANDCQP 007 )
No active quantities found on &2 ( JKSDDEMANDCQP 038 )
Quantity cannot be changed (weekday &2, date &3) ( JKSDDEMANDCQP 039 )
Quantity cannot be activated (weekday &2, date &3) ( JKSDDEMANDCQP 058 )
Quantity cannot be deactivated (weekday &2, date &3) ( JKSDDEMANDCQP 096 )
Choose only one media issue ( JKSDDEMANDCQP 113 )
You cannot copy to a weekday of your choice ( JKSDDEMANDCQP 114 )
No authorization to display constant quantity planning ( JKSDDEMANDCQP 115 )
No authorization to change constant quantity planning ( JKSDDEMANDCQP 116 )
No authorization to create constant quantity planning ( JKSDDEMANDCQP 117 )
Contract &1 &2, issue &3 is not supplied ( JKSDDEMANDCQP 128 )
Supply cannot be added on &1 ( JKSDDEMANDCQP 139 )
Supply cannot be ended on &1 ( JKSDDEMANDCQP 141 )
Delivery sequence not found for specified planned suspensions ( JKSDEUWVCAL 005 )
Document &1 with document type &2 &3 is not allowed for suspension &4 ( JKSDEUWVCAL 006 )
User &1 is not assigned to a user group ( JKSDFC 001 )
No planning groups found ( JKSDFC 002 )
No media products found ( JKSDFC 003 )
No segmentation variants found ( JKSDFC 004 )
No planning segments found ( JKSDFC 005 )
No planning group found for segmentation variant &1 ( JKSDFC 006 )
No products found for planning group &1 ( JKSDFC 007 )
No contracts assigned to variant &1, seg. product group &2 ( JKSDFC 013 )
Product &1 in contract does not match planning group &2 ( JKSDFC 014 )
Contract &1, item &2 already assigned variant &3 ( JKSDFC 015 )
Planning group &1, variant &2, segment &3 cannot be deleted ( JKSDFC 020 )
Assigned user group is not assigned to a segmentation group ( JKSDFC 040 )
Reference issues not created for issue &1 in &2 / &3 / &4 ( JKSDFC 050 )
No unique standard segmentation variant for product group &1 ( JKSDFC 069 )
No changes to factors for alternative units of measure in a test run ( JKSDGOODSRECEIPT 016 )
There must be a purchase order for each row in multiple selection ( JKSDGOODSRECEIPT 021 )
Entry quantity distributed in purchase order unit of measure ( JKSDGOODSRECEIPT 024 )
Assignment: &1 &2 - &3 &4 posted ( JKSDGOODSRECEIPT 031 )
&1 started with max. &2 items: &3 &4 ( JKSDGOODSRECEIPT 032 )
&1 returns read ( JKSDGOODSRECEIPT 033 )
Data summarized to &1 records ( JKSDGOODSRECEIPT 034 )
Group run &1 with &2 summarized records (&3 returns) ( JKSDGOODSRECEIPT 035 )
Record &1 &2 contains errors: &3; no further processing ( JKSDGOODSRECEIPT 036 )
Goods receipt control rule &1 &2 determined from table ( JKSDGOODSRECEIPT 042 )
Goods receipt control: No rule determined &1 &2 ( JKSDGOODSRECEIPT 043 )
Please specify a quantity ( JKSDORDER 004 )
Invalid data transfer from BAdI ISM_CHECK_REQUEST ( JKSDORDER 007 )
Transfer & (internal system number) not found ( JKSDORDER 009 )
Order &1 item &2 already created ( JKSDORDER 011 )
Return category & not maintained in system ( JKSDORDER 013 )
Unable to create return request ( JKSDORDER 015 )
Transfer request &1 created ( JKSDORDER 016 )
Media product assignment cannot be edited ( JKSDORDER 017 )
Selection includes more than 150 hits ( JKSDORDER 019 )
No item data is specified for return & ( JKSDORDER 020 )
Specify an admissible value for the maximum return quantity allowed ( JKSDORDER 021 )
Specify an admissible value for expected returns ( JKSDORDER 022 )
End of returns before start of returns ( JKSDORDER 023 )
Choose an operation ( JKSDORDER 026 )
No deliveries found for BP & in role RM ( JKSDORDER 029 )
Maintain and complete header data ( JKSDORDER 031 )
Media issue specified incorrectly ( JKSDORDER 035 )
Media issue & not found ( JKSDORDER 036 )
Media product not found ( JKSDORDER 037 )
Incorrect unit of measure maintained in user settings ( JKSDORDER 038 )
Item &: publication specified incorrectly ( JKSDORDER 047 )
Item &1: no deliveries found with BP &2 in role 'RM' ( JKSDORDER 049 )
No orders found for item ( JKSDORDER 061 )
Place the cursor on an item that contains values ( JKSDORDER 062 )
No orders/credit memos found for return ( JKSDORDER 063 )
No credit memos generated yet for this item ( JKSDORDER 064 )
Deletion not possible since credit memo already created ( JKSDORDER 066 )
Select the request or an item to accept ( JKSDORDER 068 )
Save data first or cancel ( JKSDORDER 069 )
Customizing error: request & not processed ( JKSDORDER 075 )
Sales area &1 &2 &3 does not exist in the system ( JKSDORDER 076 )
Save data or press 'Refresh' first ( JKSDORDER 077 )
BP & does not exist in the role of retailer ( JKSDORDER 080 )
Item &: different business partners in orders ( JKSDORDER 082 )
No media issues found for media family &1 and date &2 ( JKSDORDER 083 )
Orders can only be displayed for items ( JKSDORDER 084 )
Quantity for transfer greater than quantity delivered ( JKSDORDER 085 )
No deliveries found for business partner & with the specified material ( JKSDORDER 086 )
Unit incorrect for quantity for transfer ( JKSDORDER 093 )
Transfer request &1 processed successfully ( JKSDORDER 096 )
Error during transfer generation ( JKSDORDER 099 )
Transfer type & not maintained in Customizing ( JKSDORDER 103 )
-------- Errors in credit memo generation for return & ------------------ ( JKSDORDER 105 )
Specify transfer type ( JKSDORDER 108 )
Weekly recording cannot be set up for product &1 from &2 to &3 ( JKSDORDER 117 )
Mix &1 copied for media issue &2 ( JKSDORDER 120 )
Order already exists for contract &1 item &2 and media issue &3 ( JKSDORDER 121 )
Order item not created for contract &1 item &2 ( JKSDORDER 122 )
Order not created for contract & ( JKSDORDER 124 )
Order not created for contract & ( JKSDORDER 125 )
Followup error: missing data for generating orders for contract & ( JKSDORDER 126 )
Media issue &1 does not belong to media product from contract &2 item &3 ( JKSDORDER 130 )
No returning BP found for contract &1 item &2 ( JKSDORDER 131 )
Specification of media issue to be generated for contract & not clear ( JKSDORDER 133 )
Role 'RM' must not be specified at header level ( JKSDORDER 135 )
Program error ( JKSDORDER 137 )
Save request first before switching modes ( JKSDORDER 138 )
Item & not found in order & ( JKSDORDER 139 )
Inconsistency in program: parameter &1 &2 &3 ( JKSDORDER 140 )
Item &1 not found in order &2 ( JKSDORDER 142 )
Media issue &1 is not in the issue sequence for media product &2 ( JKSDORDER 145 )
Quantity change not possible for media issue &1 and contract &2 ( JKSDORDER 146 )
Invalid unit &1 for media issue &2 ( JKSDORDER 147 )
Quantity not yet created for order &1 item &2 and media issue &3 ( JKSDORDER 149 )
Order quantity not found for contract &1 item &2 and issue &3 ( JKSDORDER 150 )
No quantity found for item &1 in contract &2 for media issue &3 ( JKSDORDER 154 )
Attribute Internet user deleted from settings ( JKSDORDER 155 )
Item &: Conditions in the orders do not match ( JKSDORDER 160 )
Error in contract & ( JKSDORDER 161 )
Order &1 item &2 cannot be deleted due to follow-on document ( JKSDORDER 162 )
No right of return for media issue ( JKSDORDER 164 )
No right of return for media issue ( JKSDORDER 165 )
Item &: media issue not unique ( JKSDORDER 167 )
Item &1: Issue not found for family &2, copy &3 and year number &4 ( JKSDORDER 169 )
Media issue not unique ( JKSDORDER 171 )
No media issues found for media family &1 and date &2 ( JKSDORDER 172 )
No orders found for BP &1 in role &2 for media family &3 ( JKSDORDER 174 )
Item &: No right of return for the media issue ( JKSDORDER 176 )
Issue sequence for media product &1 does not exist in selected period ( JKSDORDER 178 )
Specify selection by date, copy number or issue number ( JKSDORDER 180 )
Specify media product and ship-to party or contract and contract item ( JKSDORDER 181 )
No returns found with the data specified ( JKSDORDER 197 )
Inconsistent data for orders for media issue &1 and BP &2 ( JKSDORDER 200 )
Order type & not intended for orders ( JKSDORDER 201 )
No media issue that is in an issue sequence corresponds to your entries ( JKSDORDER 203 )
Internal posting error: contact your system administrator ( JKSDORDER2 030 )
Internal error (contact your system administrator) ( JKSDORDER2 031 )
Media issue for publication date &1 not in issue sequence for product &2 ( JKSDORDER 204 )
Internal error (contact your system administrator) ( JKSDORDER2 042 )
Internal error (contact your system administrator) ( JKSDORDER2 043 )
Internal error (contact your system administrator) ( JKSDORDER2 044 )
Internal error (contact your system administrator) ( JKSDORDER2 049 )
System error during deletion ( JKSDORDER2 051 )
System error during insertion ( JKSDORDER2 052 )
Contract assignment is not possible for media issue &1 ( JKSDORDER2 068 )
Unit &1 for material &2 not defined for business partner ( JKSDORDER 207 )
Internal error (contact your system administrator) ( JKSDORDER2 071 )
Multiple planning areas have been assigned to one media product ( JKSDORDER2 077 )
Internal error (contact your system administrator) ( JKSDORDER2 082 )
Invalid call for selecting orders ( JKSDORDER 209 )
No contract found for order & ( JKSDORDER 210 )
Follow-on order type not specified for contract type &1 ( JKSDORDER2 151 )
Media issue not specified clearly ( JKSDORDER 220 )
&: No deliveries of issue & in role RM to returning BP ( JKSDORDER 229 )
&1: No right of return for media issue &2 ( JKSDORDER 230 )
&: Media issue not unique ( JKSDORDER 231 )
&: Base units of measure in media issues do not match ( JKSDORDER 234 )
&1: Media issue &2 not found ( JKSDORDER 236 )
&1: Media product &2 &3 &4 not found ( JKSDORDER 237 )
&1: Media issue not found for family &2, copy number &3 and year no. &4 ( JKSDORDER 238 )
&: Unit from user settings cannot be converted to unit for material ( JKSDORDER 239 )
&1: No media issues found for customer for media family &2 ( JKSDORDER 240 )
No media issues found for customer for media family &1 ( JKSDORDER 241 )
Conditions for customer &1 'RM' and media issue &2 not the same ( JKSDORDER 248 )
Internal error (contact your system administrator) ( JKSDORDER 255 )
Followup error (contact your system administrator) ( JKSDORDER 256 )
No orders found for business partner &1 in role &2 ( JKSDORDER 263 )
Quantity in schedule line &1 not same as order quantity &2 ( JKSDORDER 267 )
Media issue & belongs to several media products ( JKSDORDER 282 )
Media issue & indicator - no quantity change ( JKSDORDER 290 )
More than one returning retailer marked for & ( JKSDORDER 293 )
Item created by generation, deletion not possible ( JKSDORDER 296 )
CAUTION: This program is not released by SAP for Release 4.71 ( JKSDORDER 304 )
Media issue & not in issue sequence for specified media product ( JKSDORDER 307 )
Partner det.procedure &1 of order type &2 not suitable for order creation ( JKSDORDER 308 )
Deliveries exist for contract &1, &2 and issue &3 ( JKSDORDER 312 )
Customizing settings incomplete for operation & ( JKSDORDER 318 )
Distributed quantity not the same as return quantity ( JKSDORDER 319 )
Error object not initialized ( JKSDORDER 320 )
No returns processed ( JKSDORDER 329 )
Inconsistent data: item category & is no longer defined ( JKSDORDER 332 )
Result contains &1 entries (&2 are displayed) ( JKSDORDER 336 )
You have not selected a business partner role ( JKSDORDER 350 )
Item &: quantity greater than return quantity agreed acc.to contract ( JKSDORDER 352 )
Quantity greater than return qty agreed according to contract (max. &1) ( JKSDORDER 353 )
&: Quantity greater than return quantity agreed acc.to contract ( JKSDORDER 354 )
Order with quantity 0 cannot be created ( JKSDORDER 362 )
Programming error: a generated order always has a contract ( JKSDORDER 364 )
Not all hits displayed ( JKSDORDER 366 )
The basic orders have not yet been billed ( JKSDORDER 368 )
Returning BP &1 is not the same as sold-to party &2 in orders ( JKSDORDER 370 )
Specify reference document to accept item ( JKSDORDER 375 )
Reference order copied to all items ( JKSDORDER 378 )
No media products specified ( JKSDORDER 379 )
Customizing settings not maintained for individual order via Internet ( JKSDORDER 380 )
Error during implementation of method CHANGE for BAdI ISM_PRIORITY ( JKSDORDER 393 )
No contracts found for the selection criteria ( JKSDORDER 402 )
Sales of material &1 prohibited on &2 ( JKSDORDER 410 )
No orders found for return ( JKSDORDER 412 )
Delivery quantity cannot be negative ( JKSDORDER 414 )
Total of delivery quantities in the priorities not same as order quantity ( JKSDORDER 415 )
Inconsistent data for media issue & ( JKSDORDER 417 )
Inconsistent data for weekly view ( JKSDORDER 418 )
The system switched automatically to item recording ( JKSDORDER 419 )
Error during implementation of method CHANGE for BAdI ISM_PRIORITY ( JKSDORDER 420 )
Error in order generation for item &1 of contract &2 ( JKSDORDER 422 )
Exceptional system failure triggered during setup of RFC connection ( JKSDORDER 428 )
Incomplete order &1 was deleted ( JKSDORDER 431 )
Orders found that were not generated fully (regenerate log) ( JKSDORDER 434 )
Issue in delivery sequence but not generated ( JKSDORDER 453 )
Quantity from purchase quantity planning < 0 (orders cannot be changed) ( JKSDORDER 456 )
No user settings found for your user ( JKSDORDER 457 )
Save data first or cancel ( JKSDORDER 464 )
User is already assigned a profile ( JKSDORDER 466 )
The service profile cannot be deleted ( JKSDORDER 470 )
Use item recording ( JKSDORDER 475 )
Contract/item blocked because suspension exists ( JKSDORDER 476 )
Unable to delete all the selected items ( JKSDORDER 488 )
Customizing error for operation type &1 ( JKSDORDER 501 )
Flat rate credit memo was not generated ( JKSDORDER 502 )
Quantity-related credit memo was not generated ( JKSDORDER 503 )
Operation type &1 not admissible for generating credit memo requests ( JKSDORDER 506 )
A credit memo request has already been marked for order &1 item &2 ( JKSDORDER 515 )
Qty change indicator not selected for quantity planning version &1 ( JKSDORDER 526 )
Sub-items cannot be created with reference to billing documents ( JKSDORDER 529 )
Restart log cannot be locked ( JKSDORDER 530 )
Quantities cannot be copied ( JKSDORDER 531 )
Maximum number of modes reached (function cannot be executed) ( JKSDORDER 533 )
Data contains errors (cannot be saved) ( JKSDORDER 534 )
This is not a statistical return ( JKSDORDER 537 )
Return &1 processed successfully ( JKSDORDER 552 )
Serious error has occurred ( JKSDORDER 553 )
Order item was not created by generation ( JKSDORDER 557 )
Program error: this call is no longer supported ( JKSDORDER 570 )
Specify media issue more precisely ( JKSDORDER 572 )
Delivered quantity as new order quantity ( JKSDORDER 575 )
Order &1 item &2 not created by generation ( JKSDORDER 590 )
This class is no longer supported in Release 4.71 ( JKSDORDER 591 )
Service Cockpit cannot be started ( JKSDORDER 593 )
No business partner data selected ( JKSDORDER 594 )
Deletion of contract item not possible ( JKSDORDER 596 )
Deletion of item not possible since M/SD logistics already executed ( JKSDORDER 597 )
Error in BAdI implementation ISM_UNSOLDQUANTITY ( JKSDORDER 598 )
Error in BAdI implementation ISM_UNSOLDQUANTITY ( JKSDORDER 599 )
Issues cannot be determined for product &1 ( JKSDORDER 607 )
Quantity changes not possible since deliveries exist for shipping orders ( JKSDORDER 611 )
Customer selection parameters must begin with Z ( JKSDORDER 614 )
Errors occurred when releasing return &1 ( JKSDORDER 624 )
Program error (contact the software supplier) ( JKSDORDER 645 )
Program error (contact the software supplier) ( JKSDORDER 646 )
Deletion not possible due to subsequent document ( JKSDORDER 651 )
Please run upgrade report RJKSD_471_COMPONENT_QUANTITY ( JKSDORDER 652 )
Document is a return ( JKSDORDER 653 )
Document is a transfer posting ( JKSDORDER 654 )
Order generation currently in process ( JKSDORDER 656 )
Unable to update order ( JKSDORDER 657 )
Unable to update order ( JKSDORDER 658 )
Delivery dates not fully adjusted ( JKSDORDER 660 )
No mix found for carrying issue &1 and issue &2 ( JKSDORDER 670 )
Contract &1 item &2 is not assigned an issue mix ( JKSDORDER 671 )
These operation types cannot be used together in one operation ( JKSDORDER 680 )
Order generation locked due to cross-distrib. chain status &2 of issue &1 ( JKSDORDER 681 )
Media issue &1 has cross-distribution chain status &2 for order gen. ( JKSDORDER 682 )
Order generation locked due to DC-specific status &2 of issue &1 ( JKSDORDER 683 )
Media issue &1 has DC-specific status &2 for order generation ( JKSDORDER 684 )
This function module is no longer supported ( JKSDORDER 691 )
Schedule line date must not be in the past ( JKSDORDER 705 )
This program has been obsolete since release 4.64 ( JKSDORDER 710 )
Return &1 is not an old generation return ( JKSDORDER 712 )
Initial return &1 item &2 locked by &3 ( JKSDORDER 739 )
Return locked due to cross-DC status &2 of issue &1 ( JKSDORDER 781 )
Media issue &1 has cross-DC status &2 for return ( JKSDORDER 782 )
Return is locked due to DC-specific status &2 of issue &1 ( JKSDORDER 783 )
Media issue &1 has DC-specific status &2 for the return ( JKSDORDER 784 )
Item &1: Return not possible due to cross-DC status ( JKSDORDER 794 )
Item &1: Return not possible due to DC-specific status ( JKSDORDER 795 )
Enter the media product ( JKSDORDER 800 )
Configuration settings incomplete: Terminating program ( JKSDORDER 842 )
Enter the publication date or the number of days ( JKSDORDERBOOK 037 )
Unable to determine document type for purch.org. &1, plant &2, vendor &3 ( JKSDORDERBOOK 062 )
Calculation method &1 does not exist ( JKSDORDERBOOK 070 )
Document category &1 is not supported in purchase order generation ( JKSDORDERBOOK 071 )
Error reading stock type Return to Publisher &1 ( JKSDORDERBOOK 077 )
Material document &1: Stock type posted, &2, differs from master data &3 ( JKSDORDERBOOK 079 )
Stock type 'Return to Publisher' not defined for issue &1, plant &2 ( JKSDORDERBOOK 086 )
Movement type &1 is used several times in goods movement procedure &2 ( JKSDORDERBOOK 113 )
Display mode: Allowed number of locks reached for transaction ( JKSDORDERBOOK 127 )
Display mode: Allowed number of records reached for transaction ( JKSDORDERBOOK 128 )
Display mode: Limit reached for lock table ( JKSDORDERBOOK 129 )
Enter the media product, (family), and publication date ( JKSDQEVENT 003 )
No characteristics assigned for event &1 ( JKSDQEVENT 037 )
Maintain the Customizing settings for calculating the correction figures ( JKSDQEVENT 042 )
No rule defined in planning profile for media product &1 ( JKSDQEVENT 075 )
Class missing for rule &1 for calculating corrected sales figures ( JKSDQEVENT 077 )
An error occurred while creating the contract items ( JKSDRETAIL 014 )
Media issue &2 in assortment &1 is not assigned to a media product ( JKSDRETAIL 016 )
The contracts were already adjusted ( JKSDRETAIL 025 )
Contract data does not exist for contract &1 ( JKSDRETAIL 027 )
The periods for the contract data on contract &1 are inconsistent ( JKSDRETAIL 028 )
Assignment of contract item &1/&2: Assortment article inconsistent ( JKSDRETAIL 043 )
Partner roles not fully adjusted for contract &1 ( JKSDRETAIL 044 )
RFC problem: &1 ( JKSDRETAIL 051 )
You do not have authorization to display time-dependent partner roles ( JKSDRETAIL 055 )
You do not have authorization to maintain time-dependent partner roles ( JKSDRETAIL 056 )
Further partner roles of BP &1 have not yet been processed in full ( JKSDRETAIL 065 )
Adjustments of partner roles must be reset in chronological order ( JKSDRETAIL 072 )
Unable to determine a contract. Credit memo not generated ( JKSDRETURN 082 )
Specify either the group or the operation ( JKSDRETURN 110 )
Return cannot be reversed ( JKSDRETURN 125 )
Quantity check not possible ( JKSDRETURN 150 )
Return already reported as 'Sold Out' ( JKSDRETURN 158 )
Return cannot be saved ( JKSDRETURN 160 )
Quantity field &1 contains non-numeric entry &2 ( JKSDRETURN 185 )
Item number &1 not found in table ITEMSX ( JKSDRETURN 195 )
Item &1 cannot be deleted ( JKSDRETURN 201 )
Return locked by user &1, display only ( JKSDRETURN 202 )
Object cannot be accepted ( JKSDRETURN 203 )
Item &1 unit of measure not specified ( JKSDRETURN 210 )
Unable to determine a check procedure item ( JKSDRETURN 233 )
Unable to determine a check procedure header ( JKSDRETURN 234 )
Unable to determine sales data for retailer &1 ( JKSDRETURN 236 )
Unable to determine sales data for material &1 ( JKSDRETURN 237 )
Phase model type &1 is not allowed for promotions ( JKSDSBR 050 )
Media issue cannot be identified definitively ( JKSDSQP 009 )
Starting issue determined (&1) is not in the selected issue sequence ( JKSDSQP 017 )
Target field &1 for event assignment cannot be changed in current view ( JKSDSQP 020 )
You do not have authorization to process product &1 ( JKSDSQP 025 )
No settings found for start and stop issues ( JKSDSQP 032 )
No settings found for statistics configuration ( JKSDSQP 033 )
Horizon not moved for issue &1. It is assigned to more than one product ( JKSDSQP 061 )
Return &1 has the wrong preceding document ( JKSDUNSOLD 004 )
Return &1 has the wrong successor document ( JKSDUNSOLD 005 )
Planned quantity for contract &1 &2 media issue &3 cannot be changed ( JKSDVERSION 006 )
&3 duplicates not replaced when version &1 copied to &2 ( JKSDVERSION 007 )
Quantity for contract &1 &2 media issue &3 cannot be deleted ( JKSDVERSION 012 )
Order history displayed refers to active version &1 ( JKSDVERSION 024 )
Delivered field &1 from constant service is not locked in qty planning ( JKSDVIEW 030 )
Usage (sales or purchase order quantity planning) not found ( JKSDVIEW 044 )
Aggregation field &1 assigned more than once ( JKSDVIEW 047 )
Application &1 is assigned several quantity planning views ( JKSDVIEW 050 )
Calculation method &1 is not assigned source fields ( JKSDVIEW 051 )
No unique quantity planning view defined for user &1 ( JKSDVIEW 054 )
Characteristic field &1 assigned more than once ( JKSDVIEW 057 )
Unable to determine planning structure for media product &1 ( JKSDVIEW 061 )
Too many substructures assigned to quantity planning view &1 ( JKSDVIEW 064 )
Substructure not defined uniquely for application &1 ( JKSDVIEW 074 )
Planning organization &1 is not assigned any media products ( JKSDVIEW 080 )
Error while saving. Not all data was saved. ( JKSDWORKLIST 013 )
Error while saving. Changes not applied in full (see long text) ( JKSDWORKLIST 036 )
No selection criteria specified for media products or issues - check ( JKSDWORKLIST 039 )
Media issues and retail articles selected. Select separately ( JKSDWORKLIST 044 )
Some of the selected issues are already being processed ( JKSDWORKLIST 059 )
& is not a valid filter ID. Correct your entry ( JKSDWORKLIST 067 )
Canceling processing: default selection criteria incomplete ( JKSDWORKLIST 103 )
Start of suspension period has overlaps ( JKSECONTRACT 010 )
End of suspension period has overlaps ( JKSECONTRACT 011 )
Enter subsequent delivery date ( JKSECONTRACT 014 )
The suspension cannot be deleted since orders already exist ( JKSECONTRACT 015 )
The suspension period cannot be shortened ( JKSECONTRACT 017 )
Installation date already set to &1 contract &2 item &3 ( JKSECONTRACT 023 )
Sales document &1 is not a contract for quantity planning ( JKSECONTRACT 026 )
No deliveries found that match the selection criteria ( JKSECONTRACT 029 )
No deliveries found with the delivery status specified ( JKSECONTRACT 031 )
No contracts found that match the selection criteria ( JKSECONTRACT 032 )
Contract suspended; no subsequent delivery ( JKSECONTRACT 046 )
Item &1 has more than 1 active price group ( JKSECONTRACT 170 )
Items &1 have more than 3 active price groups ( JKSECONTRACT 171 )
Basic date of rule & is start or end date of contract ( JKSEORDER 010 )
Date rules for contract start and contract end are interdependent ( JKSEORDER 040 )
Unable to create suspension ( JKSERENEWAL 105 )
Unable to create suspension ( JKSERENEWAL 107 )
No pyt method type specified for pyt method &1 (Cust.: TJKPAYMODETYPE) ( JKSOCREATE 004 )
No payment method type specified for pyt method &1 and company code &2 ( JKSOCREATE 005 )
No pyt method specified for pyt method type &1 (Cust.: TJKPAYMODETYPE) ( JKSOCREATE 006 )
No payment method specified for pyt method type &1 and company code &2 ( JKSOCREATE 007 )
Date of ND notification must not be in the future ( JKUD 010 )
Enter the item number ( JKUD 026 )
The order item is maintained with several schedule lines ( JKUD 031 )
Unable to determine publication definitively ( JKUD 037 )
Publication &1 is not managed in copy numbers ( JKUD 038 )
Database update was unsuccessful (table: &1, key: &2) ( JKVIAC_SUSPEND 001 )
Changes by IACs suspended (date: &1; time: &2) ( JKVIAC_SUSPEND 005 )
Changes by IACs will be restored (date: &1, time: &2) ( JKVIAC_SUSPEND 013 )
The previous status was restored for the selected entries ( JKVIAC_SUSPEND 025 )
No Customizing entry for key KEY_CONTROL = & ( JKWWW 001 )
No Customizing entry for key KEY_FIX = & ( JKWWW 002 )
No Customizing entry for key KEY_CHECK = & ( JKWWW 003 )
Key KEY_CONTROL is initial ( JKWWW 004 )
Key KEY_FIX is initial ( JKWWW 005 )
Key KEY_CHECK is initial ( JKWWW 006 )
Ship-to party or bill-to party has same address as sold-to party ( JKWWW 008 )
The required checks could not be determined for payment method &1 ( JKWWW 012 )
Unable to identify business partner unambiguously ( JKWWW 018 )
Address not coded sufficiently ( JKWWW 020 )
No errors - data stored in the temporary table according to the settings ( JKWWW 034 )
Error in logon - check unsuccessful ( JKWWW 035 )
Business partner &1 is not assigned to billing document &2 ( JKWWW 037 )
The address data does not match ( JKWWW 038 )
The telephone numbers do not match ( JKWWW 039 )
The e-mail addresses do not match ( JKWWW 040 )
The indicator "Right to cancel read" is not selected ( JKWWW 043 )
The BP could not be checked successfully according to the data specified ( JKWWW 046 )
Change to payment data not possible at present ( JKWWW 049 )
Order &1 or a change begins on &2 - change is only possible after this ( JKWWW 053 )
Different customer numbers in check data and business partner ( JKWWW 077 )
No e-mail address recorded for business partner &1 ( JKWWW 081 )
Data required to create an Internet user is incomplete ( JKWWW 082 )
Conversion to Internet user unsuccessful ( JKWWW 084 )
No Customizing entry for key KEY_VACATION = &1 ( JKWWW 086 )
No Customizing entry for key KEY_PAYMENT = &1 ( JKWWW 087 )
No entry in Customizing for key KEY_ADDRESS = &1 ( JKWWW 088 )
This is not an error: error occurred in a dependent change ( JKWWW 091 )
The entry was deleted during runtime ( JKWWW 101 )
An order was already created for this entry ( JKWWW 102 )
Entries processed: New &1; Errors/duplicates &2; Other &3 ( JKWWW 109 )
Order &1 created. Internet user already existed for BP &2 ( JKWWW 112 )
Order &1 created. Internet user created for BP &2 ( JKWWW 113 )
This entry has already been processed ( JKWWW 120 )
Result: successful changes: &1, errors: &2, already processed: &3 ( JKWWW 121 )
Changes processed - at least one record was locked ( JKWWW 123 )
Delivery viability set exists, valid-from date moved from &1 to &2 ( JKWWW 127 )
Delivery viability set found, valid-from date moved from &1 to &2 ( JKWWW 129 )
Delivery is not viable for the limited item until &1 ( JKWWW 131 )
Trial or free item must be limited for automatic transform. to chargeable ( JKWWW 132 )
You cannot use city and postal code for PO box ( JKWWW 148 )
No Customizing entry for key KEY_USER = &1 ( JKWWW 151 )
Error in Customizing - no function module created (KEY_USER = &1) ( JKWWW 156 )
No Customizing entry for key KEY_ACCESS = &1 ( JKWWW 159 )
Error in Customizing - no function module defined (KEY_CONTROL = &1) ( JKWWW 165 )
Error in Customizing - no function module defined ( JKWWW 179 )
Trial or free item must be limited for automatic transform. to chargeable ( JKWWW 181 )
Order cannot be accessed (sales document number missing) ( JKWWW 204 )
Entry deleted ( JKWWW 264 )
No entry in Customizing for key KEY_COMPL = &1 ( JKWWW 301 )
No error: error occurred for another order in the Internet session ( JKWWW 314 )
A complaint was already created for this entry ( JKWWW 316 )
The entry from the temporary Internet table has been deleted ( JKWWW 317 )
The entry in the temporary Internet table has already been processed ( JKWWW 318 )
No entries were selected ( JKWWW 320 )
Complaint update was started ( JKWWW 325 )
Unable to determine the complaint item in order & ( JKWWW 327 )
A complaint already exists in the complaint period ( JKWWW 329 )
Complaint has not yet been created or has not yet been updated ( JKWWW 330 )
The selected entries have been processed (complaints: &1, errors: &2) ( JKWWW 334 )
A complaint for order type &1 can only last for one day ( JKWWW 337 )
This '&' does not allow '&' ( JL 002 )
Transfer type & not allowed for service company ( JL 010 )
No text found for reversal reason & in language & & ( JL 098 )
You have not flagged a selection ( JL 111 )
A maximum of one edition remuneration type can be flagged ( JL 121 )
Purchasing organization is not assigned to a sales area ( JL 123 )
Specified settlement date & is not a key date in calendar & ( JL 147 )
Search sequence missing ( JL 151 )
Deletion not allowed - assignments exist ( JL 153 )
At least one delivery was archived in collective settlement run &1 ( JL 168 )
At least one delivery was archived during settlement &1 ( JL 169 )
Document type for FI-CA cannot be derived from object type &1 ( JL 170 )
Main transaction/subtransaction cannot be derived from values &1 &2 &3 ( JL 171 )
Main transaction/subtransaction cannot be derived from values &1 &2 &3 ( JL 172 )
Settlement &1 does not have a contract account ( JL 173 )
Settlement &1 has a contract account ( JL 174 )
Service company &1 has membership status 'Own SC' ( JL 175 )
This arrangement is not allowed for deliveries from external interface ( JL 185 )
Sales area &/&/& is not assigned to a purchasing organization ( JL 201 )
Service company & is not assigned to company code & ( JL 249 )
Service company & does not exist ( JL 250 )
Service company & has a deletion indicator - settlement not possible ( JL 251 )
Error in configuration files for transfer ( JL 252 )
Arrangement 'edition average' not allowed for summarization at pub.level ( JL 417 )
Arrangement 'explode inserts for specific dates' is not allowed ( JL 418 )
No postal charges found ( JL 448 )
Selection includes several settlement documents ( JL 457 )
Please maintain weekly publication frequency for publication & edition & ( JL 459 )
Your selection does not include all goods arrival lists for document & ( JL 467 )
Postal charges for 'reduced charge package' do not exist ( JL 478 )
No authorization to change checking status for publ. in division & ( JL 484 )
No authorization for overview of goods arr. list for publ. in division & ( JL 485 )
No authorization for postal charge statistics for publ. in division & ( JL 486 )
No postal rate for package type & for (&/&) ( JL 495 )
No unit rate exists for transport channel 'Air' ( JL 496 )
Alternative currency: Condition type & ( JL 498 )
House currency (&1) different from remuneration currency (&2) ( JL 513 )
No control data found for client - please maintain in customizing ( JM 001 )
Material maintenance only possible in standard Materials Management sys. ( JM 002 )
Material & not found in standard tables ( JM 003 )
Material & has deletion indicator - processing not possible ( JM 006 )
Material & already exists in table & ( JM 007 )
Material & is flagged for deletion ( JM 008 )
Valid-from date of future prices not in future ( JM 009 )
Please enter future price and date or leave both fields blank ( JM 011 )
Material & was not created correctly ( JM 012 )
Material & was not changed correctly ( JM 013 )
Material & locked ( JM 014 )
Coupon booklet & does not exist ( JM 020 )
ID code contains characters that are not allowed ( JMM 001 )
Check digit of ID code is incorrect ( JMM 002 )
Media product master record & specified has incorrect hierarchy level ( JMM 003 )
Values for format, height/width/unit of measurement are contradictory ( JMM 006 )
Values for height, width and unit of measurement are overwritten ( JMM 008 )
Unit of measurement &1 not allowed ( JMM 009 )
Calculation of weight from size is only possible for pages (PG) ( JMM 011 )
Number entered is not in any of the available number intervals ( JMM 014 )
ID code area entered does not exist ( JMM 015 )
Number of characters in upper limit is incorrect, &1 chars is correct ( JMM 018 )
Incorrect number of characters in lower limit, &1 chars is correct ( JMM 019 )
Maximum ID code length of 18 characters exceeded ( JMM 020 )
An identical entry with an overlapping validity period exists ( JMM 025 )
Business partner has not been created in the specified role ( JMM 028 )
No template for addressee &1, announcement type &2, language &3 ( JMM 029 )
Several entries exist with the same role and sequence ( JMM 030 )
Number of characters for the upper limit is too large, maximum & chars ( JMM 032 )
Number of characters for the lower limit is too large, maximum & chars ( JMM 033 )
The lower and upper limit must have an identical number of characters ( JMM 034 )
ID code can no longer be assigned ( JMM 036 )
Material & specified has not been classified in class type 001 ( JMM 037 )
No business partner has been assigned to material & specified ( JMM 039 )
ID code & is blocked by another material ( JMM 040 )
The end date is earlier the start date ( JMM 042 )
No free number in ID code number range ( JMM 043 )
ID code has incorrect length ( JMM 045 )
ID code has wrong number of separators ( JMM 046 )
Enter the ID code type first ( JMM 048 )
Input help not available for this ID code type ( JMM 049 )
ID code &1 is already assigned to media issue &3 ( JMM 050 )
ID code &1 is already assigned to media product &3 ( JMM 051 )
ID code &1 is already assigned to media product family &3 ( JMM 052 )
Enter a multiple usage type ( JMM 053 )
The system cannot propose available ID codes ( JMM 054 )
Number of separators too small ( JMM 057 )
Specify the separator character ( JMM 058 )
Separator character before check digit requires check digit ( JMM 059 )
ID code type & does not use ID code areas ( JMM 061 )
Entry exists more than once ( JMM 062 )
Several ID codes marked as main ID code ( JMM 063 )
Several ID codes of type & assigned ( JMM 064 )
Inadmissible multiple usage of ID codes ( JMM 065 )
Too many business partners assigned in role &1 ( JMM 066 )
No assignment in required role &1 for business partner assignment ( JMM 067 )
Check digit algorithm &1 not defined ( JMM 068 )
No business partner assigned in role &2 ( JMM 071 )
Specified assignment does not exist ( JMM 072 )
Unable to read data on business partner & ( JMM 073 )
Internal error ( JMM 074 )
Enter a lower/upper limit of & characters ( JMM 075 )
Access not allowed without &1 ( JMM 076 )
Enter the name of an existing function module ( JMM 077 )
Enter the start and end dates ( JMM 078 )
ID code &1 has incorrect format ( JMM 079 )
ID code number range does not exist ( JMM 080 )
Enter the ID code ( JMM 081 )
ID code area contains invalid characters ( JMM 082 )
Correct the number of separator characters in the ID code area ( JMM 083 )
Enter the length ( JMM 084 )
No media product master record found for &1 &2 ( JMM 085 )
Media product master record for &1 &2 not unique ( JMM 086 )
Unable to determine ID code type for characteristic &1 ( JMM 087 )
No entry exists for internal ID code type &1 in language &2 ( JMM 088 )
ID code type &1 is invalid in language &2 ( JMM 089 )
Unable to read ID code types ( JMM 091 )
No SAP BP role maintained for partner role &1 ( JMM 092 )
Maintenance of media-specific fields not allowed for master record & ( JMM 099 )
Unit of measure for dimensions changed ( JMM 100 )
Values for length, width and thickness have been deleted ( JMM 101 )
ID code area exceeds maximum length allowed by & characters ( JMM 102 )
ID code cannot be changed ( JMM 103 )
Billing item could not be transferred to OR data collector ( JMM 114 )
Programming error: billing document &1 not found ( JMM 115 )
Error occurred while mapping data from SD to OR data collector ( JMM 116 )
Billing item could not be removed from OR data collector ( JMM 117 )
Billing type invoice list or credit memo list ( JMM 123 )
Quantity planning records still exist for media issue & ( JMM 145 )
Do not enter an audit report number for the WEMF audit report type ( JMM 201 )
Audit report type cannot be changed (please reset to '&') ( JMM 202 )
Period type '&1' is not a valid entry ( JMM 203 )
Invalid period ( JMM 204 )
Media product master record & does not exist ( JMM 205 )
No publication assigned to the higher-level media product family ( JMM 206 )
No publication or edition assigned to the higher-level media product ( JMM 207 )
Material number is longer than 8 characters ( JMM 208 )
Material number is longer than 8 characters ( JMM 209 )
Material number is longer than 10 digits ( JMM 210 )
Material number is longer than 10 digits ( JMM 211 )
Enter a division ( JMM 212 )
Media issue for the same media product. Publication date already exists ( JMM 213 )
Publication date is in the past (please check your entry) ( JMM 214 )
A publication period requires a publication period type ( JMM 215 )
Audit report ID requires audit report type ( JMM 216 )
Copy number &1 already assigned for media product &2. ( JMM 217 )
Availability date is not before publication ( JMM 218 )
Goods arrival is not before availability date ( JMM 219 )
Check ISPC number for this media product family ( JMM 220 )
ISPC object number is not unique in this media product family ( JMM 222 )
ISPC subobject number is not unique within the media product ( JMM 223 )
No external publisher assigned as business partner ( JMM 224 )
Frequency rule and factory calendar are both required for generation ( JMM 225 )
Creation with template not possible ( JMM 226 )
Material type & cannot be synchronized ( JMM 227 )
Material type &1 is not allowed for hierarchy level &2 ( JMM 229 )
Media product master &1 cannot be synchronized ( JMM 230 )
Choose a media product family that can be synchronized ( JMM 231 )
Assign a media product that is synchronized ( JMM 232 )
Assign a media product that is not synchronized ( JMM 233 )
Material number has already been assigned to a publication ( JMM 234 )
Material number has already been assigned to an issue ( JMM 235 )
Material type &2 is not synchronized ( JMM 236 )
Media product & is currently in the migration phase ( JMM 238 )
Edition & was already migrated ( JMM 239 )
Media issue &1 cannot be created before &2 ( JMM 240 )
Ad insert type not intended for material type &1 ( JMM 241 )
Assign a material type that is not synchronized ( JMM 242 )
Assign a material type that is synchronized ( JMM 243 )
There should be an even number of pages (please check your entry) ( JMM 244 )
Maintain the field 'Returns allowed' ( JMM 245 )
Maintain the start and end of the return ( JMM 246 )
Issue & is assigned to product & and is in sequence for product & ( JMM 247 )
Issue &1 has publ. date &2. Publ. date is invalid in seq. for product &3 ( JMM 248 )
Issue &1 has publ. date &2. Publ. date is invalid in seq. for product &3 ( JMM 249 )
Latest delivery date &1 must not be before publication date &2 ( JMM 250 )
Issue is in issue sequence for product &. Publication date & invalid ( JMM 253 )
Issue & is assigned to several synchronized products ( JMM 254 )
Media issue &: PEDEX fields maintained but PEDEX is inactive (long text) ( JMM 255 )
Media issue &: PDEX2 fields maintained but PDEX2 is not active ( JMM 256 )
Enter media product family or media product ( JMM 401 )
Media product master record &1 is &2 ( JMM 402 )
Selection by issue sequence is only allowed for media products ( JMM 403 )
Enter media product family or media product ( JMM 404 )
Media products without ref. to media product family are not selected ( JMM 405 )
Media issues without reference to media products are not selected ( JMM 406 )
Enter media product ( JMM 407 )
Reset indicator in additional data ( JMM 408 )
Maintain minimum entries ( JMM 409 )
Media product master &1 is not a media product family ( JMM 410 )
Media product master &1 is not a media product ( JMM 411 )
Enter one media product only ( JMM 412 )
Do not enter a period for issue sequence selection ( JMM 413 )
Material & is not a media product master record ( JMM 503 )
Media product master record & should not be edited with function & ( JMM 504 )
No business partner category allowed for role category &1 ( JMM 505 )
Template materal &1 is not suitable ( JMM 506 )
Template & has the wrong hierarchy level ( JMM 508 )
Unable to read master record ( JMM 509 )
Media product master record & specified has incorrect hierarchy level ( JMM 510 )
You cannot make this change to the material type for the media prod.mast. ( JMM 513 )
New material type &2 is not allowed for hierarchy level &3 ( JMM 514 )
Template &1 is not a media product master record ( JMM 516 )
Value '&2' cannot be copied for characteristic &1 ( JMM 518 )
Too many business partners assigned in role &1 ( JMM 519 )
Unable to create log ( JMM 522 )
Partner &2 in role &1 was not copied ( JMM 523 )
Valuation of characteristic &1 cannot be copied ( JMM 528 )
Unable to create &1. See log ( JMM 529 )
&1 created. &2 errors occurred ( JMM 530 )
&1 created. &2 warnings occurred ( JMM 531 )
Unable to copy document &2 to &1 ( JMM 536 )
Template &1 is a media product master record ( JMM 538 )
Unable to delete existing document assignments for &1 ( JMM 539 )
No log exists for WBS element &1 ( JMM 540 )
&2 was not created from WBS element &1 ( JMM 541 )
Entry not unique ( JMM 542 )
&1 was not created from a WBS element ( JMM 543 )
No log exists for appropriation request &1 ( JMM 544 )
&2 was not created from appropriation request &1 ( JMM 545 )
Entry not unique ( JMM 546 )
&1 was not created from an appropriation request ( JMM 547 )
Unable to create media product master & ( JMM 548 )
Template is a variant ( JMM 549 )
Weight cannot be calculated because leaf weight missing ( JMM 551 )
WBS element has already been used ( JMM 557 )
Appropriation request has already been used ( JMM 558 )
Valuation template does not exist ( JMM 559 )
Valuation template does not exist ( JMM 560 )
WBS element does not contain unit costs ( JMM 562 )
Several cost estimates found for WBS element ( JMM 564 )
&: & dependent publication exists ( JMM 601 )
&: & dependent edition exists ( JMM 602 )
&: & dependent issue exists ( JMM 603 )
&: & use in issue sequence ( JMM 604 )
&: & issue sequence exists for media product ( JMM 605 )
&: & dependent media product exists ( JMM 606 )
&: & dependent media issue exists ( JMM 607 )
&: & order for ad insert exists ( JMM 608 )
&: & "Archived" indicator missing for issue in issue sequence ( JMM 625 )
Media product master &1 assigned &2 &3 ( JMM 651 )
No parameters assigned for generation model ( JMM 652 )
Media product master &1 assigned &2 &3 ( JMM 653 )
No generation model transferred ( JMM 654 )
Unable to determine model value ( JMM 655 )
Unable to determine model value ( JMM 656 )
Maintenance of storage type data &1 &2 not possible for &3 ( JMM 661 )
Maintenance of warehouse number data &1 not possible for &2 ( JMM 662 )
Maintenance of valuation data &1 &2 not possible for &3 ( JMM 663 )
Maintenance of storage location data &1 &2 not possible for &3 ( JMM 664 )
Maintenance of sales data &1 &2 not possible for &3 ( JMM 665 )
Maintenance of plant data &1 not possible for &2 ( JMM 666 )
Maintenance of basic material data not possible for &1 ( JMM 667 )
Generation not possible due to status of generation profile ( JMM 681 )
Generation profile &1 is inconsistent ( JMM 683 )
You do not have authorization to execute master data generation ( JMM 684 )
Generation profile &1 already exists ( JMM 705 )
Master data template &1 is not released ( JMM 706 )
You do not have authorization to maintain generation profile &1 ( JMM 707 )
You do not have authorization to delete generation profile &1 ( JMM 708 )
You do not have authorization to display generation profile &1 ( JMM 709 )
Enter master data template ( JMM 710 )
Status must not be changed ( JMM 715 )
Generation profile &1 cannot be changed ( JMM 716 )
Generated code contains syntax errors ( JMM 717 )
Unable to determine ID of IP with GUID & ( JMM 751 )
Unable to determine IP with ID & ( JMM 752 )
IPM system unavailable ( JMM 753 )
Title master &1 cannot be processed with transaction &2 ( JMM 801 )
Material & is not a title master record ( JMM 802 )
Material & is not a title master record ( JMM 803 )
No changes necessary for unloading point &1 for SAP BP &2 ( JMSD2SD 058 )
You must first create a contract for unloading point & and product & ( JMSD2SD 071 )
Error occurred while inserting research & ( JN 001 )
Error occurred while updating research & ( JN 002 )
Research type & does not exist - please check your entry ( JN 005 )
Database error occurred while reading table & ( JN 007 )
Research & locked by user & ( JN 008 )
System is unable to lock at present ( JN 009 )
Research & is flagged for deletion ( JN 010 )
Research & is flagged for deletion ( JN 011 )
Please position cursor on a text line ( JN 013 )
Referenced research belongs to research type & ( JN 014 )
Research completed - only display mode possible ( JN 015 )
Resubmission group missing ( JN 017 )
Resubmission type or language not maintained ( JN 029 )
Database error occurred while accessing table TJN01 ( JN 045 )
Please specify either research type and org.data or ref.research ( JN 051 )
Research result & is not allowed for research type & ( JN 066 )
Research result & is not allowed for a bank returns research ( JN 067 )
Incoming payments for billing doc.& not executed via automatic debit ( JN 068 )
Research type & is not allowed for bank returns research ( JN 069 )
Research & is not bank returns research ( JN 072 )
Research & is a bank returns research ( JN 074 )
Please maintain bank returns research (&) in billing ( JN 075 )
The indicator 'Print invoice' is being reset ( JN 076 )
Research & cannot be deleted since it was already transferred ( JN 077 )
Error occurred when deleting research & ( JN 078 )
Cancelling indicator 'Delete collection authorization' ( JN 093 )
Messages were deleted for object - therefore no output determination ( JN 099 )
Enter bank details ( JN 111 )
Payer & is locked - bank data cannot be maintained ( JN 112 )
Bank returns research &1 was already transferred ( JN 216 )
Research result &1 not allowed in fast entry of bank returns ( JN 217 )
Payment method &1 is not allowed ( JN 218 )
Reversal reason &1 does not exist ( JN 219 )
Individual transfer required due to change of payment method ( JN 220 )
The incoming payment for pymt method &1 takes place via automatic debit ( JN 221 )
The transfer for payment method &1 must take place by individual transfer ( JN 222 )
Please enter a date ( JN 600 )
Parameter 'include terminated subscriptions' is not selected ( JN 601 )
Function not possible ( JO 001 )
Select an activity ( JO 006 )
Select a WBS element ( JO 007 )
Select a network ( JO 008 )
Time difference was calculated using Gregorian calendar ( JO 013 )
Profile & does not exist. (correct) ( JO 014 )
No suitable objects were found ( JO 015 )
Data updated ( JO 016 )
This variant cannot be used ( JO 017 )
Profile & cannot be changed ( JO 021 )
Selection profile & does not exist. (correct) ( JO 022 )
Profile & is protected by user & ( JO 024 )
No suitable object was selected ( JO 028 )
Variant & does not exist. (correct) ( JO 031 )
Text module & does not exist (correct) ( JO 032 )
All selected objects are displayed ( JO 035 )
You cannot save as project version (see long text) ( JO 037 )
Graphic display not possible, no suitable unit ( JO 038 )
Fields for earned value analysis are not used. ( JO 040 )
Fields for expenses/financing are not used ( JO 041 )
Status selection profile & does not exist: incomplete selection ( JO 052 )
Selection contains object with inconsistent status: incomplete selection ( JO 053 )
At least one display authorization does not exist ( JO 402 )
Not all milestones are displayed ( JO 403 )
The milestone no longer exists in current data ( JO 406 )
OCX control for graphical representation cannot be displayed ( JO 407 )
No milestones have been selected ( JO 410 )
Not all fields could be inserted ( JO 504 )
One field was shortened ( JO 505 )
Descriptions are not unique ( JO 515 )
You cannot use field & ( JO 517 )
Internal error occurred ( JO 700 )
Internal error occurred ( JO 701 )
Internal error occurred ( JO 702 )
Program cancelled ( JO 703 )
Communication problem has occurred. Check RFC destination & ( JO 704 )
Download table & contains & fields. MS Access supports only 255 ( JO 705 )
You cannot change more than one project at a time ( JO 750 )
Maintain the field values for mass changes ( JO 751 )
No changes made (see long text) ( JO 757 )
Table & is currently being processed by user & ( JO 805 )
System error: Table/view & could not be locked ( JO 806 )
Error & in time difference calculation ( JO 900 )
Scope-dependent job definitions need further maintenance. See longtext. ( JOBREPO 000 )
No authorization for changing Technical Job Definitions ( JOBREPO 016 )
Attention: Job Terminations will always be ignored (see longtext) ( JOBREPO 080 )
This multi-instance JD has no job instances (see longtext) ( JOBREPO 094 )
The given report variant is not a system variant (see longtext) ( JOBREPO 103 )
The job will be executed even when JobRepo is switched off (see longtext) ( JOBREPO 112 )
No value could be determined for attribute &1 (value &2, field &3) ( JOR 011 )
Error when determining data to the OR data collector ( JOR 012 )
Some existing projects already use this coding key. ( JP 001 )
The length of the coding key must not be greater than &. ( JP 002 )
You cannot use special characters & and & consecutively in a coding mask. ( JP 003 )
You must only use X,0 and special characters & in a coding mask. ( JP 004 )
The length of the coding mask must not be greater than &. ( JP 006 )
Lines 800-899 reserved ( JP 007 )
Line groups 800-899 reserved ( JP 008 )
Control key & is not defined ( JP 009 )
Network profile & does not exist ( JP 010 )
Projects/WBS elements with the editing mask & still exist. ( JP 011 )
Line group 850 is reserved for available plan ( JP 012 )
Line group 860 is reserved for available budget ( JP 013 )
Line 850 is reserved for available plan ( JP 014 )
Line 860 is reserved for available budget ( JP 015 )
Standard projects/WBS elements still exist with the editing mask & ( JP 016 )
(Internal) error while determining issue sequence default ( JPMGEN 003 )
Unable to create a new issue sequence ( JPMGEN 004 )
Activate factory calendar ( JPMGEN 005 )
Error: Required entries on issue sequence are incomplete ( JPMGEN 006 )
From-date for default setting must be between & and & ( JPMGEN 013 )
Error in issue sequence proposal: issue sequence remains unchanged ( JPMGEN 016 )
&3 media issues not assigned to issue sequence in sel.period (&1 - &2) ( JPMGEN 023 )
Issue sequence maintained from &. Correct from-date for proposal ( JPMGEN 024 )
Error: Material number & is not unique in the current issue sequence ( JPMGEN 049 )
Material number & already exists in issue sequence (outside selection) ( JPMGEN 050 )
Material number & already exists (not assigned to issue sequence) ( JPMGEN 051 )
Error: Publication date & is not unique in the current issue sequence ( JPMGEN 055 )
Error: Copy number & is not unique in the current issue sequence ( JPMGEN 056 )
Error: Copy number & already exists for media issue & ( JPMGEN 057 )
Error: Copy number & already exists for media issue & ( JPMGEN 058 )
Error: Publication date & already exists for media issue & ( JPMGEN 059 )
Error: Publication date & already exists for media issue & ( JPMGEN 060 )
Data saved. (Job has yet to be scheduled for issue generation.) ( JPMGEN 062 )
Selection either by publication date, copy number or media issue ( JPMGEN 066 )
Error: Issue sequence changed in planned period (in M/SD) ( JPMGEN 069 )
You do not have authorization to maintain issues ( JPMGEN 072 )
You do not have authorization to display issues ( JPMGEN 073 )
Info: Data on product &2 incomplete in template issue &1 ( JPMGEN 075 )
Media issue & cannot be deleted from issue sequence ( JPMGEN 076 )
To-date must be within selection period (between & and &) ( JPMGEN 077 )
Copy number & is not in issue sequence for product & ( JPMGEN 080 )
Media issue & is not in issue sequence for product & ( JPMGEN 081 )
Publication date & is not in issue sequence for product & ( JPMGEN 082 )
Error: Template issue & (&) without M/SD synchronization not allowed ( JPMGEN 091 )
Error: Template issue & (&) with M/SD synchronization not allowed ( JPMGEN 092 )
Error: Media issue & without M/SD synchronization is not allowed ( JPMGEN 093 )
Error: media issue & is not allowed with M/SD synchronization ( JPMGEN 094 )
Error: Template issue & is not allowed without M/SD synchronization ( JPMGEN 095 )
Error: Template issue & is not allowed with M/SD synchronization ( JPMGEN 096 )
Info: Product data for product &2 in template issue &1 is incomplete ( JPMGEN 097 )
Data was saved. Errors occurred during creation of media issues ( JPMGEN 101 )
Error: Issues with requirements planning deleted from issue sequence ( JPMGEN 102 )
Migration active: not all media issues are activated for generation ( JPMGEN 105 )
Error: Issue sequence changed before migration date & ( JPMGEN 106 )
Date & is outside selection. Switch to calendar maintenance not possible ( JPMGEN 107 )
Publication dates not all maintained: switch to calendar maint. not poss. ( JPMGEN 108 )
Publication dates not unique: switch to calendar maintenance not possible ( JPMGEN 109 )
M/SD keys for media issue are inconsistent ( JPMGEN 121 )
M/SD keys for ad insert are inconsistent ( JPMGEN 122 )
M/SD keys for media issue are inconsistent ( JPMGEN 123 )
M/SD keys for ad insert are inconsistent ( JPMGEN 124 )
Caution: Migration of publication & to media product is active ( JPMGEN 126 )
Publication &: migration is not active ( JPMGEN 129 )
Publication &: migration completed ( JPMGEN 130 )
Publication &: maintain from-date for migration ( JPMGEN 131 )
Publication &: generation trigger invalid from migration date & ( JPMGEN 137 )
Publication &: Media product family has not yet been created ( JPMGEN 138 )
Publication &: Media product has not yet been created for edition & ( JPMGEN 139 )
Publication &: Media issues already exist in issue seq. for edition & ( JPMGEN 145 )
Publication &1: data in media product &3 not consistent for edition &2 ( JPMGEN 180 )
Data in media product family &2 not consistent for publication &1 ( JPMGEN 181 )
Media product migration active for publication &: function cancelled ( JPMGEN 185 )
You do not have authorization to perform media product migration ( JPMGEN 186 )
Issues from migration date &3 not yet deleted for publ. &1, edition &2 ( JPMGEN 191 )
Publication &, edition &, issue &, pub.date &: issue not yet deleted ( JPMGEN 192 )
Publication &, edition &, issue &, pub.date &: issue not yet created ( JPMGEN 193 )
Publication &, edition &: issues not yet created from migration date & ( JPMGEN 194 )
Publication & edition &: production unit synchron.was not carried out ( JPMGEN 199 )
Publication & edition &: JFREVVA not completely converted from mig.date & ( JPMGEN 202 )
Publication & edition & issue & pub.date &: JFREVVA conversion not perfd. ( JPMGEN 203 )
Table JFREVVA is not active in the migration period ( JPMGEN 213 )
Revenue accrual table JFREVVA converted ( JPMGEN 214 )
Conversion of revenue accrual table JFREVVA incomplete ( JPMGEN 215 )
Unable to convert issue (old) & (publication/edition & publ.date &) ( JPMGEN 218 )
Family & (product &) was migrated (migration date: &) ( JPMGEN 219 )
Family & (product &) was migrated (migration date: &) ( JPMGEN 220 )
Planning complete for product & in MSD up to &. No changes bef.this date ( JPMGEN 221 )
Migration of product & is active. Migration Cust.settings incomplete ( JPMGEN 222 )
Error: Return data for template & (weekday &) is incomplete ( JPMGEN 232 )
Error: Return data for template & is incomplete ( JPMGEN 233 )
Quantity plan horizon can be moved by a maximum of & issue(s) ( JPMGEN 237 )
Quantity plan horizon start was moved into past ( JPMGEN 240 )
Error: Issues with shipping schedules deleted from issue sequence ( JPMGEN 248 )
No organizational units selected ( JPMGEN 249 )
Publ.dates not in chronological order: switch to calendar maint.not poss. ( JPMGEN 251 )
Maintenance mode not active for calendar ( JPMGEN 253 )
Error: Publication dates not in chronological order (M/SD synch. active) ( JPMGEN 260 )
Control settings for media prod.mig.incomplete. Seq.cannot be maintained ( JPMGEN 261 )
Media product migration complete. Publ. date is before migration date & ( JPMGEN 264 )
Media product migration not complete. Issue sequence cannot be maintained ( JPMGEN 265 )
Error: Publication dates not in chronological order (for subseq. procs) ( JPMGEN 268 )
Error creating media issue & ( JPMGEN 269 )
Error occurred while creating ID codes for media issue & ( JPMGEN 270 )
Error occurred while creating the classification for media issue & ( JPMGEN 271 )
Error occurred while creating the classification for media issue & ( JPMGEN 272 )
Error creating business partner assignment for media issue & ( JPMGEN 273 )
Error: Mat.no. & already included as plan value in another (synch.) seq. ( JPMGEN 274 )
No issues automatically assigned to media product & ( JPMGEN 295 )
Media issues cannot be created in issue sequences for the selected data ( JPMGEN 317 )
At least one publication date is outside of factory calendar & ( JPMGEN 321 )
Error creating planning areas for media issue & ( JPMGEN 329 )
Error creating listing for article & ( JPMGEN 330 )
Error creating purchasing info records for article & ( JPMGEN 331 )
Error creating purchasing info records for media issue & (see long text) ( JPMGEN 334 )
Error creating return collection index for media issue ( JPMGEN 335 )
Error in sales price calculation for article & ( JPMGEN 340 )
Product & has daily service type. Entry invalid ( JPMGEN 342 )
Product & has non-daily service type. Entry invalid ( JPMGEN 343 )
Error in purchasing info record conditions for media issue & ( JPMGEN 410 )
Issue & (product &): Archiving cannot be cancelled ( JPMGEN 430 )
Select materials and retail articles separately ( JPMGEN 434 )
Media product migration not complete. Issue sequence cannot be maintained ( JPMGEN 452 )
Changes to issue sequence attributes are not allowed ( JPMGEN 501 )
Unable to read file &1 ( JPOST 001 )
Record &1 contains alternative city &2 to city &3 ( JPOST 002 )
Record &1 does not contain a region ( JPOST 003 )
Record &1 does not contain a postal code or this is formatted incorrectly ( JPOST 004 )
Error occurred while reading in file &1 ( JPOST 006 )
Previous version of postal data is more recent than that being imported ( JPOST 007 )
File &1 already transferred successfully ( JPOST 011 )
File &1 currently being processed ( JPOST 012 )
House number range for record &1 could not be decoded ( JPOST 015 )
Record &1 contains an incorrect city ( JPOST 019 )
Error during number assignment ( JPOST 020 )
Record &1 does not contain a series indicator ( JPOST 021 )
Record &1 contains conflict with house numbers and/or series indicator ( JPOST 022 )
Record &1 contains conflict with house numbers and/or house number ID ( JPOST 023 )
Record &1 contains unknown record type &2 ( JPOST 024 )
Problem reading files. Please check ( JPOST 025 )
Specified version &1 does not correspond to imported version (&2) ( JPOST 032 )
Issue already assigned to split ( JPRODUCT 001 )
Enter a media issue, an ad insert or a material ( JPRODUCT 002 )
Carrying issue and issue for insertion are the same ( JPRODUCT 003 )
Inserts must originate from plant & ( JPRODUCT 006 )
Product & for insertion not found in system ( JPRODUCT 007 )
Truck route & has a deletion indicator. Processing not possible ( JR 002 )
Dimension of & is not length ( JR 003 )
Start time + duration exceeds end time ( JR 004 )
Time to be checked is not between start and end time ( JR 005 )
Value is not correct: Max. 71 hours, 59 minutes. No special symbols. ( JR 006 )
Truck route & could not be created ( JR 007 )
Truck route & could not be changed ( JR 008 )
Truck route & could not be deleted ( JR 009 )
Truck route contract & could not be created ( JR 010 )
Truck route contract & could not be deleted ( JR 011 )
Truck route contract & could not be deleted ( JR 012 )
Dimension of & is not 'time' ( JR 014 )
Truck route contract & already exists in table & ( JR 015 )
Truck route contract & has deletion indicator - processing not possible ( JR 016 )
Truck route contract & has no items ( JR 017 )
Template truck route contract & has no items ( JR 019 )
Validity period for item is outside header interval ( JR 020 )
Start date was not entered ( JR 021 )
End date was not entered ( JR 022 )
Truck route & is locked by user & ( JR 024 )
Truck route contract & is locked ( JR 025 )
Truck route is not assigned to a truck route contract ( JR 026 )
Truck route contract & does not exist ( JR 027 )
Truck route contract has no items ( JR 028 )
Truck route & for a truck route contract item does not exist ( JR 029 )
Forwarding agent is not assigned a truck route contract ( JR 030 )
Truck route & is flagged for deletion ( JR 031 )
Loaded running distance specified - please also enter load unit ( JR 032 )
Load unit specified - please also enter loaded running distance ( JR 033 )
Empty running distance specified - please also enter unit ( JR 034 )
Empty unit specified - please also enter empty running distance ( JR 035 )
Please make entries in all fields for pricing statistics ( JR 036 )
Validity period overlaps with item in truck route contract & ( JR 037 )
Truck route & does not exist ( JR 039 )
Indicator 'BP Post' can only be selected if BP is required ( JR 041 )
Indicator 'Printing works required' can only be selected if BP not req. ( JR 042 )
Unloading point for business partner: Please specify business partner ( JR 055 )
Loading point &1 must be of type "Plant" ( JR 071 )
Unloading point & is loading point for truck route & ( JR 076 )
Split routes cannot be deleted ( JR 090 )
The system could not delete all daily truck routes ( JR 091 )
Truck route & is not a basic route ( JR 094 )
Split route & is already assigned to a basic truck route ( JR 095 )
Basic truck route & and split route & depart from different plants ( JR 096 )
Transaction for 'old' unloading rule was replaced. New JR32 and JR33 ( JR 099 )
Error while calculating duration: Start time must be before end time ( JR 107 )
Function only possible one day before or after or on the planning date ( JR 108 )
'Truck departs' can only be executed if return time is initial ( JR 109 )
Actual availability time is in the future ( JR 110 )
No daily truck routes found for these selection criteria ( JR 111 )
Error in time specifications ( JR 141 )
Validity period cannot be shortened ( JR 199 )
First level reached ( JR 291 )
Last level reached ( JR 292 )
No detail analysis for this selection ( JR 293 )
No basic truck routes match your truck route selection criteria ( JR 301 )
Generation run not possible (daily truck routes locked by user &) ( JR 302 )
Generation run not possible (trigger locked by user &) ( JR 303 )
Generation run not possible (user & generating daily truck routes) ( JR 304 )
System is currently unable to lock ( JR 305 )
Prohibited program status - please notify your system administrator ( JR 313 )
Prohibited program status (internal error) ( JR 314 )
Prohibited program status (internal error) ( JR 315 )
Prohibited program status (internal error) ( JR 316 )
Error occurred while reading factory calendar & ( JR 318 )
Error occurred while reading public holiday calendar for factory cal.& ( JR 319 )
No public holiday calendar defined for factory calendar & ( JR 320 )
Prohibited program status - please notify your system administrator ( JR 321 )
There is more than 1 daily truck route for run date & for truck route & ( JR 322 )
A change number is currently being released. ( JR 323 )
Truck route & is not a basic truck route - check your entry ( JR 331 )
Prohibited program status - please notify your system administrator ( JR 399 )
Unloading viability sets may be deleted if changed ( JR 402 )
You are in copy mode ( JR 405 )
Unloading viability set locked by & (sales org. &, dist.channel &, DT &) ( JR 406 )
Lock not possible - system problem with lock server ( JR 407 )
No delivery viability set of this kind exists ( JR 411 )
Period for change number not completely within period for deliv.viability ( JR 412 )
Unloading viability set already exists in maintenance table ( JR 413 )
Unloading viability already exists in maintenance table ( JR 414 )
Unloading viability set already exists (on database) ( JR 415 )
Planned changes exist for the unloading viability set: deletion not poss. ( JR 416 )
Unloading viability set can only be deleted with change number & ( JR 418 )
Active records can only be deleted if they have same period as unl.VSet ( JR 419 )
The selected record is not a terminated record ( JR 420 )
Please specify loading/unloading point ( JR 421 )
Period for change number greater than validity period of load./unl.point ( JR 422 )
Unloading viability set must be active before it can be terminated ( JR 423 )
Record deleted - termination not possible ( JR 424 )
Record already terminated - termination cannot be repeated ( JR 425 )
Unloading viability set terminated on & ( JR 426 )
'Cancel unloading viability set deletion' not possible for this record ( JR 427 )
Cancelling unloading via.set deletion only possible with change number & ( JR 428 )
Cancelling deletion not possible - related delivery viability completed ( JR 429 )
Please make entries in all required fields ( JR 430 )
Shipping already performed in period for change number ( JR 431 )
Unloading point & was only replaced & times with unloading point & ( JR 435 )
Unloading point could not be substituted ( JR 436 )
Unable to create unloading viability set ( JR 439 )
No new unloading viability sets were created ( JR 440 )
Please assign all unloading points a sequence number first ( JR 441 )
Please assign all truck routes a sequence number first ( JR 442 )
Carrier route & does not have an unloading point for odd bundles ( JR 445 )
Access either via carrier route or unloading point ( JR 451 )
Unloading rule not required for selected publication/edition ( JR 452 )
No related unloading rules required for line selection ( JR 453 )
Line selection invalid - please choose a publication edition ( JR 454 )
Unloading rules were changed ( JR 455 )
Not all unl.points in unloading viability set have truck route assignment ( JR 456 )
Delete unloading rule only with change number & ( JR 458 )
Line selection invalid - please reposition the cursor ( JR 460 )
Maintain requested quantity of odd bundles for unloading point ( JR 461 )
There are unloading points with requested quantity 0 from & to & ( JR 462 )
Indicator missing for odd bundle from & to & ( JR 463 )
'Unloading point' indicator should only be selected once for odd bundle ( JR 464 )
Unloading rule must be active for completion ( JR 465 )
All related unloading rules completed on & ( JR 466 )
Unloading rule with number & does not exist - internal error ( JR 470 )
Maintenance of unloading rules not necessary for the selected object ( JR 471 )
Function not possible - first reset or delete 'Odd bundle' indicator ( JR 472 )
It is not possible to finish with the current change number & ( JR 473 )
Unloading point & is not a business partner unloading point ( JR 474 )
Unloading rules locked by user & ( JR 475 )
Rules for business partner unloading point never have unloading via.sets ( JR 476 )
Check of rules for selected publication/edition was successful ( JR 477 )
Record only displayed for information purposes - deletion not possible ( JR 478 )
Release procedure in process - unloading rules cannot be processed ( JR 479 )
Function only poss. for ad pre-print del.type and ad pre-print publ.type ( JR 481 )
Unable to create a new special rule ( JR 482 )
Deletion not possible - special rules exist. DT & public./edition & & ( JR 483 )
Deletion cannot be cancelled: please perform first for general rules ( JR 484 )
No line selected in upper section - please select line(s) first ( JR 485 )
No line selected in lower section - please select line(s) first ( JR 486 )
Invalid line selection ( JR 489 )
Unloading rules were generated for carrier route & ( JR 490 )
No rule could be created for carrier route & for unloading point & ( JR 491 )
& ( JR 492 )
No rule could be created for unloading point & for truck route & ( JR 493 )
Function modules missing for unloading rules in bundling ( JR 494 )
Please enter either the business partner or the plant, but not both ( JR 495 )
No bundling rule defined for edition &3 &1 with delivery type &2 ( JR 501 )
Production group & contains a number of elements ( JR 506 )
No packing guideline for address postal code &, country & ( JR 507 )
No unloading viability set created for carr.route/geo.unit &, publ. & ( JR 509 )
No packing guideline for postal code &, country &, packing level & ( JR 512 )
No function module exists for delivery type & ( JR 514 )
Unloading rule missing for unloading pnt &, route & (publict.&/edition &) ( JR 515 )
Odd bundle not assigned to unloading point & route & (public. & / edit.&) ( JR 516 )
No minimum quantities defined for delivery type & and shipp.network & ( JR 519 )
Several variants for edition & and delivery type & ( JR 524 )
No variant created for edition & and delivery type & ( JR 525 )
Several dispatch type sequences for shipp.schedule variant & and PCd & ( JR 526 )
Containers already packed for geo.unit &, edition &, delivery type & ( JR 528 )
Bundling not possible - daily truck routes are being processed ( JR 530 )
Bundling not possible - shipping schedule is currently being edited ( JR 531 )
Drop-offs are locked by user & ( JR 532 )
No authorization for bundling in plant & ( JR 533 )
Please either specify shipping date or have the system determine it ( JR 534 )
Minimum number of units in postal pack missing for packing rule & ( JR 535 )
Please specify date ( JR 536 )
Minimum number of units for bundle (rule type &) missing ( JR 538 )
Shipping run cancelled - different shipping dates ( JR 539 )
No planned weights maintained for issues & or their inserts ( JR 540 )
No availability times maintained for issue & at plant & ( JR 541 )
No daily truck route found in unloading point & for variant & ( JR 543 )
Shipping run cancelled - no valid shipping date ( JR 544 )
Please specify shipping group ( JR 545 )
No postal packs or drop-offs found for selection criteria specified ( JR 550 )
Deletion not possible - postal packs are still packed in containers ( JR 551 )
Postal pack & is already packed in container & ( JR 552 )
Deletion cancelled - no containers found ( JR 553 )
Deletion cancelled - common odd bundle ( JR 554 )
No container packing specified for delivery type & ( JR 555 )
Unable to determine a unique next shipping date ( JR 556 )
Drop-off & not packed since network missing ( JR 557 )
Deletion not possible - production data still exists ( JR 558 )
Unable to determine an unambiguous next date ( JR 559 )
Assignment does not exist for delivery & and network & ( JR 560 )
Deletion not possible. Drop-offs active in LES interface ( JR 562 )
Rule missing for plant &, delivery type &, network &, container type & ( JR 563 )
Internal error - system could not pack all packs on level & ( JR 564 )
Drop-offs exist that do not belong to the schema ( JR 570 )
Order deadline not reached for publication & deliv.type & ( JR 580 )
Please specify plant, publication and date ( JR 591 )
Please note access sequence ( JR 592 )
Function module for sort for repetition group & was not found ( JR 602 )
&: Invalid basic unit of measure (only ST, VP, %) ( JR 652 )
Unloading rule not required for & ( JR 653 )
No records selected according to the criteria specified ( JR 656 )
& &: Total of quantities < 100% ( JR 657 )
& &: You did not specify a quantity for unloading point & ( JR 660 )
&: No quantity specified for basic unit of measurement VP. ( JR 661 )
&: You did not specify a quantity for truck route & ( JR 662 )
No lines selected ( JR 663 )
Select only one line ( JR 664 )
Invalid issue variant type ( JR 665 )
Exception to issue variant type & already exists on & ( JR 666 )
Special rule already exists for ad pre-print & ( JR 667 )
No unloading rule found for the selection criteria specified ( JR 669 )
Invalid line selection ( JR 670 )
Invalid cursor position ( JR 671 )
Worklist has been processed ( JR 674 )
No unloading point sequence found for the selection criteria specified ( JR 675 )
Selection is restricted to one truck route ( JR 676 )
You can only move between drop-offs in one truck route ( JR 720 )
Bundles and containers cannot be selected ( JR 721 )
An unloading via.set already exists in the period for the new one ( JRABLBAR 007 )
Shipping already performed in period for change number ( JRABLBAR 012 )
Valid from date must be later than &. Please correct your entry ( JRABLBAR 018 )
Structures being edited by user & ( JRABLBAR 019 )
Locking by system not possible at present ( JRABLBAR 020 )
Unload.viability set not completed defined in subst.period (-> long text) ( JRABLBAR 027 )
Geographical unit & was deleted ( JS 012 )
Hierarchy type & does not exist - please correct your entry ( JS 019 )
Geographical unit & is assigned other geographical units ( JS 021 )
Key is numeric. Please check your entry ( JS 022 )
Postal units are assigned to geographical unit & ( JS 023 )
Assignment to carrier route & not possible - please correct your entry ( JS 024 )
Assignment to geographical unit & not possible ( JS 025 )
Geographical unit & is assigned other geographical units ( JS 026 )
Assignment not allowed ( JS 027 )
Assignment not possible - conflict betw.type of geo.unit + type of post.U ( JS 028 )
Split routes are assigned to truck route & ( JS 029 )
House number area overlaps with street already created ( JS 031 )
Check and correct overlap for & & ( JS 032 )
No overlaps found below & & ( JS 033 )
Entry & is too long - please correct ( JS 034 )
Assignment to an organizational unit not possible ( JS 035 )
Release not possible - organizational structures still being processed ( JS 038 )
Geographical units are assigned to organizational unit & at a lower level ( JS 040 )
Please enter a key ( JS 041 )
Suspension due to reassignment and cannot be deleted ( JS 063 )
Operation cannot be performed on level 0 ( JS 064 )
Object cannot be deleted using change number & ( JS 065 )
Object & cannot be deleted on level & ( JS 066 )
Deletion not possible - assignment is inactive ( JS 067 )
Exit only with change number that is valid for longer period than assgmt ( JS 069 )
Object & is not fully exploded ( JS 070 )
Object & cannot be created - periods overlap ( JS 071 )
Object & already in structure ( JS 072 )
Exclusive subordination of geo.unit & not possible for longer than & days ( JS 073 )
You cannot exit assignment of object & ( JS 074 )
Exiting or reassignment of object & not possible ( JS 075 )
Assignment of object & cannot be edited ( JS 076 )
You cannot exit assignment of object & ( JS 077 )
Suspension cannot be deleted ( JS 078 )
Periods for change number and suspension overlap ( JS 079 )
Operation not possible for assignment & (related inactive assignment) ( JS 080 )
Assignment & already exists on the same structure level ( JS 081 )
Operation not possible for suspensions ( JS 082 )
Valid-from date for change number before valid-from date for assignment & ( JS 083 )
Assignments can only be suspended with restricted change number ( JS 084 )
Period for change number not in period for assignment & ( JS 085 )
Assignment cannot be deleted with change number & ( JS 086 )
Object & cannot be processed with assignment type 'exclusive' ( JS 087 )
Dependent assignment exists - deletion not possible ( JS 088 )
Assignment to object & cannot be deleted ( JS 089 )
Period for change number greater than period for assignment to & ( JS 090 )
Time for change number not in period for assignment to object & ( JS 091 )
Valid-from date of change number after valid-to date of assignment & ( JS 092 )
Valid-from date of change number before valid-from date of assignment & ( JS 093 )
Valid-to date of change number after valid-to date of assignment & ( JS 094 )
Valid-to date of change number same as valid-from date of assignment & ( JS 095 )
Object & was already reassigned ( JS 096 )
Read depth extended to & ( JS 097 )
You are in the reassignment mode ( JS 098 )
Object & is not a root object in the selected structure ( JS 099 )
Creation not possible within postal hierarchy ( JS 100 )
Scrolling not possible - please position cursor on table ( JS 102 )
Assignment between carrier route & and geo. unit & already created ( JS 106 )
Assignment between insert zone & and carrier route & already created ( JS 107 )
Assignment between geo. unit & and postal unit & already created ( JS 108 )
Please position cursor on a valid line to explode further ( JS 112 )
Object was reassigned - transfer data ( JS 113 )
Object cannot be exploded any further ( JS 114 )
Active assignment cannot be deleted for object & ( JS 115 )
Please extend read depth first ( JS 121 )
Object & cannot be exploded any further ( JS 122 )
Street & cannot be exploded any further ( JS 124 )
Deletion of assignment was cancelled - please display detail screen ( JS 125 )
Assignment was changed by & - please save data first ( JS 126 )
Assignment of object & to object & already created ( JS 127 )
Assignment to object & created by reassignment ( JS 128 )
Release not possible - structures are still being edited ( JS 129 )
Period of assignment to object & is not in period for change number ( JS 131 )
Duration of suspension is longer than & days ( JS 132 )
No structure changes found for change number & ( JS 133 )
Suspension cannot be terminated for node & ( JS 134 )
Reassignment not possible - incorrect validity period for change number ( JS 162 )
No read routine for postal hierarchy for country & ( JS 163 )
Lower level assignment was cancelled ( JS 164 )
Release not possible - bundling running ( JS 165 )
Bundling not possible at present - release running ( JS 166 )

Length: 722047 Date: 20191022 Time: 005102

Count: 2845     sap01-206 ( 1401 ms ) This documentation is copyright by SAP AG.

Our Service

Looking for Support? Questions?

The

Consolut

Callback-Service

Leave us your contact details and we will call you back. Panels marked with * are mandatory.