Messages

Complete Message Docu Documentation From PLM_SE_PRS_MESSAGES0 up to PVS0C005

This documentation is copyright by SAP AG.
Count: 2377 Skipped: 38
Message Docu
Description
G/L account number &1 is not maintained in chart of accounts &2 ( PM 151 )
Clearing account with number &1 is not maintained in chart of accounts &2 ( PM 152 )
G/L account currency &1 and clearing account currency & are not identical ( PM 153 )
You must enter a company code for G/L account &1 ( PM 154 )
You must enter a company code for clearing account &1 ( PM 155 )
A name for G/L acct &1 in chart of accts &2 is not maintained ( PM 156 )
A name for clearing account &1 in chart of accounts &2 is not maintained ( PM 157 )
G/L account with number &1 is not maintained in the G/L account master ( PM 158 )
Clearing account with number &1 is not maintained in the G/L acct master ( PM 159 )
Enter a clearing acct; &1 already exists as a target account ( PM 161 )
Loops in the hierarchy structure not allowed ( PM 162 )
Clearing account &1 (company code &2) not in table TTRCD ( PM 163 )
Cash mgt account name for acct &1 (co.cd &2) not in table T035D ( PM 164 )
A negative lower limit is not allowed ( PM 165 )
The minimum transfer rate must be higher than zero ( PM 166 )
The upper limit must be higher than the lower limit ( PM 167 )
The minimum transfer rate can only be as much as the min.-max.-difference ( PM 168 )
Payment amount exceeds the house bank limit ( PM 213 )
Payment amount does not exceed the house bank limit ( PM 214 )
Indicator "TODAY" set; next value date not until &1 ( PM 215 )
Flag "TODAY" set because calculated and required value date identical ( PM 216 )
Flag 'TODAY' set, as calculated value date already overdue ( PM 217 )
Calculated time period up to specified value date is &1 days ( PM 218 )
Value date acc. to calculated date on &1 ( PM 219 )
Value date acc. to calculated date on &1 and therefore overdue ( PM 220 )
G/L account number &1 is not maintained in chart of accounts &2 ( PM 251 )
Clearing account with number &1 is not maintained in chart of accounts &2 ( PM 252 )
G/L account currency &1 and clearing acct currency &2 are not identical ( PM 253 )
A name for G/L acct &1 in chart of accts &2 is not maintained ( PM 256 )
A name for clearing account &1 in chart of accounts &2 is not maintained ( PM 257 )
G/L account &1 for company code &2 not maintained in G/L account master ( PM 258 )
Clearing account &1 for company code &2 not maintained in G/L acct master ( PM 259 )
First amount column already reached ( PM 260 )
Last amount column already reached ( PM 261 )
Loops in the hierarchy structure not allowed ( PM 262 )
Clearing account &1 (company code &2) not in table TTRCD ( PM 263 )
Cash management account name for acct &1 (co. code &2) not in table T035D ( PM 264 )
A negative lower limit is not allowed ( PM 265 )
The minimum transfer rate must be higher than zero ( PM 266 )
The upper limit must be higher than the lower limit ( PM 267 )
The minimum transfer rate can only be as much as the min.-max.-difference ( PM 268 )
Account &1 in co.code &2 flagged as only relevant for cash management ( PM 269 )
Target acct for co.code &1 and currency key &2 not found (table TTRCD) ( PM 270 )
G/L account &1 not maintained for company code &2 in table TTRCD ( PM 272 )
&1 is not a valid value; valid values are 0...5 ( PM 275 )
You do not have authorization for company code &1 ( PM 276 )
Planning type &1 not maintained ( PM 278 )
Planning level &1 is not maintained ( PM 279 )
Cash management and planning source symbol &1 not maintained ( PM 280 )
Level &1 is not part of the cash management position (source symbol &2) ( PM 281 )
Grouping &1 is not maintained in the system ( PM 282 )
Target acct &1 from comp. code &2 with currency &3 has balance 0 ( PM 284 )
More than one target acct for comp.code &1 and crrcy key & (table TTRCD) ( PM 285 )
Maintain number ranges (number range object &) ( PM 286 )
Account number or cash management account name expected ( PM 288 )
Target acct &1 from comp.code &2 and currency &3 not in grouping ( PM 293 )
Last selected company code reached ( PM 296 )
First selected company code reached ( PM 297 )
Last selected currency code reached ( PM 298 )
First selected currency code reached ( PM 299 )
Comparison with payment run parameters: possible payment methods &1 ( PM 313 )
Transport lane not created. Check long text for details. ( PMD_MSG 010 )
PME installation with errors ( PME 000 )
The PME cannot be started with this GUI ( PME 001 )
PME installation with errors ( PME 002 )
Dependency &1 cannot be released due to syntax errors ( PMEVC_UI 003 )
Table cells must not have multiple values ( PMEVC_UI 010 )
Runtime version date later than model date. Adapting simulation date ( PMEVC_UI 083 )
Adaption to global characteristic &1 is not needed ( PMEVC_UI 110 )
Not all descriptions for value &1 could be copied ( PMEVC_UI 112 )
Value &1 could not be copied ( PMEVC_UI 119 )
You are not authorized to set config. materials to IPC as config. engine ( PMEVC_UI 120 )
Maximum of groups with type "Tab" reached; group &1 gets "Pushbutton" ( PMEVC_UI 123 )
Reference characteristic &1 at material &2 has unusable table name: &3 ( PMEVC_UI 404 )
Reference characteristic &1 at material &2 has unusable field name: &3 ( PMEVC_UI 405 )
Action &1 exists at configuration profile &2 of material &3 ( PMEVC_UI 412 )
Procedures with initial sort fld exist at conf. prof. &1 of material &2 ( PMEVC_UI 413 )
Procedures with same val. in sort fld exist at conf. prof. &1 of mat. &2 ( PMEVC_UI 414 )
Class &1 (&2) contains overwritten characteristics/values ( PMEVC_UI 415 )
Characteristic &1 is not assigned to a class at material &2 ( PMEVC_UI 416 )
Variant table &1 contains empty cells in line &2 ( PMEVC_UI 417 )
Variant table &1 has more than 80,000 rows and no link to database table ( PMEVC_UI 418 )
Variant table &1 has more than 10000 rows by 10 columns and no link to DB ( PMEVC_UI 419 )
Variant table &1 has fewer than 10000 rows by 10 columns and a link to DB ( PMEVC_UI 420 )
Action &1 exists at characteristic &2 at material &3 ( PMEVC_UI 421 )
Action &1 exists at BOM item &2 of material &3 ( PMEVC_UI 422 )
Action &1 exists at value &2 (characteristic &3) at material &4 ( PMEVC_UI 423 )
Procedures with initial sort field exist for parent object char. &1 ( PMEVC_UI 424 )
Procedures with initial sort field exist at BOM item &1 of material &2 ( PMEVC_UI 425 )
Procedures with initial sort fld exist for parent obj. val. &1 (char. &2) ( PMEVC_UI 426 )
Procedures with same value in sort field exist for parent obj. char. &1 ( PMEVC_UI 427 )
Procedures with same value in sort field exist at BOM itm &1 of mat. &2 ( PMEVC_UI 428 )
Proc. with same val. in sort fld exist for parent obj. val. &1 (char. &2) ( PMEVC_UI 429 )
Variant table &1 contains empty cells ( PMEVC_UI 462 )
Dependency &1 at configuration profile &2 of material &3 is not released ( PMEVC_UI 481 )
Dependency &1 at characteristic &2 at material &3 is not released ( PMEVC_UI 482 )
Dependency &1 at BOM item &2 of material &3 is not released ( PMEVC_UI 483 )
Dependency &1 at value &2 (char. &3) at material &4 is not released ( PMEVC_UI 484 )
Constraint net &1 at config. profile &2 of material &3 is not released ( PMEVC_UI 485 )
Constraint net &1 at characteristic &2 at material &3 is not released ( PMEVC_UI 486 )
Constraint net &1 at BOM item &2 of material &3 is not released ( PMEVC_UI 487 )
Constraint net &1 at value &2 (char. &3) at material &4 is not released ( PMEVC_UI 488 )
Constraint &1 at constraint net &2 at material &3 is not released ( PMEVC_UI 489 )
Procedure &1 is used multiple times at material &2 ( PMEVC_UI 501 )
Material &1 is in constraint &2 but does not exist in the config. model ( PMEVC_UI 502 )
Class &1 (&2) is in constraint &3 but does not exist in the conf. model ( PMEVC_UI 503 )
( PMEVC_UI 608 )
Wizard can be called only for material numbers with maximum 30 digits ( PMEVC_UI 801 )
&1 expected ( PME_VC_GRAMMAR_MSG 009 )
Also assign representative &1 of COT grouping &2 as a COT ( PMIQBPCUS_E 102 )
Assignment is not allowed because COT groupings &1 and &2 contain COT &3 ( PMIQBPCUS_E 105 )
COT grouping &1 is assigned to appropriation &2 ( PMIQBPCUS_E 107 )
Grant with key & already exists in Grants Management ( PMIQBPCUS_E 108 )
Also enter a credit type for this quantitative requirement ( PMIQBPCUS_E 110 )
COT grouping &1 not found ( PMIQBPCUS_E 112 )
Your sort request was partly ignored ( PN 007 )
Simultaneous access via org.structure and search help not allowed ( PN 017 )
Accounting period and payroll accounting area not specified ( PN 023 )
No valid payroll area specified ( PN 024 )
Please also specify the payroll accounting area and year ( PN 027 )
The displayed report category overrides the SAP report category ( PN 040 )
Freely-defined delimitation and search helps not permitted simultaneously ( PN 041 )
Simultaneous freely-defined delimitations and org.structure not possible. ( PN 042 )
Search help with hot key &1 missing from the collective search help PREM ( PN 044 )
Enter the type of selection view ( PN 048 )
Report category &1 cannot be assigned to report &2 ( PN 049 )
No data available for your entries ( PN 050 )
This report was deleted. Use the Ad-hoc Query instead ( PN 051 )
Personnel no. & rejected because infotype & is missing ( PN 103 )
Specified date status is incorrect ( PN 106 )
Period too long for chart ( PN 107 )
Chart cannot be displayed for individual absence types ( PN 108 )
Form feed not permitted because sort criteria are not defined ( PN 109 )
Infotype &2 not available for personnel number &1 ( PN 111 )
No customizing activity for this error ( PN 117 )
Customizing activity not in this project ( PN 118 )
Do not delete payroll cluster & with this report, see long text ( PN 119 )
Incorrect key date ( PN 121 )
You cannot select this line ( PN 132 )
Line too long ( PN 133 )
Derived period modifier & does not match internal per.modifier & ( PN 135 )
Indicate the column for the sort ( PN 136 )
Impermissible entry ( PN 137 )
Page header options chosen are mutually exclusive ( PN 142 )
No file name specified ( PN 150 )
The selected input combination is not permissible ( PN 157 )
Schema &1 does not have program class 'C' ( PN 166 )
Schema &1 is not allowed for this country ( PN 167 )
Problems while accessing PC file ( PN 171 )
List not saved in PC file. Error number: & ( PN 172 )
Personnel number not specified ( PN 320 )
Country grouping not specified ( PN 321 )
Country grouping "&" does not exist in table T500L ( PN 323 )
You have no authorization for cluster "&" ( PN 324 )
Form pool "&" could not be loaded ( PN 325 )
A system error has occurred while generating the form pool ( PN 326 )
Could not load the payroll results ( PN 327 )
No payroll results are available ( PN 328 )
Payroll result "&" could not be read ( PN 329 )
Country grouping "&" is not correct (you have chosen "&") ( PN 330 )
There are several results with identical FOR and IN information ( PN 331 )
Could not reorganize new directory ( PN 332 )
Could not write new directory to the database ( PN 333 )
The old and new directory are different ( PN 334 )
No remuneration statement program found ( PN 350 )
The variant specified for the remuneration statement does not exist ( PN 351 )
HR form & does not exist ( PN 352 )
Remuneration statement variant & does not exist ( PN 353 )
The maximum number of 7 sort fields has been reached ( PN 359 )
Payment date not defined in period & & ( PN 500 )
Amount of wage type & is less than deduction amount & ( PN 501 )
System error ( PN 800 )
Place cursor on a data line ( PN 801 )
Employee & locked ( PN 802 )
Information messages for employee & deleted from & ( PN 803 )
Employee & is not flagged as processed ( PN 806 )
Internal error: No entry in table PTAB on &1 for personnel number &2 ( PN 809 )
Fatal RFC error. Program terminated. &1 &4 ( PN 861 )
Personnel numbers could not be determined. RFC link: & ( PN 864 )
Data export from & system started ( PN 865 )
Output routine REDEFINE does not exist in report program &1 ( PN 867 )
Variant &1 of report program &2 could not be correctly interpreted ( PN 868 )
Data from job & has been transferred successfully ( PN 881 )
Not able to calculate the start time for the job. ( PN 882 )
Check the selection screen version in the report characteristics ( PN 890 )
Inconsistency between report category and ACTIVE selection screen version ( PN 891 )
Spooler: Some other internal error (RSPOEINTERN) ( PO 001 )
Spooler: Network problems (RSPOENONET) ( PO 002 )
Spooler: Input/output error (RSPOEIO) ( PO 004 )
Spooler: Error in parameters (RSPOEINVAL) ( PO 005 )
Spooler: Warning: Manual control necessary (RSPOEINSPECT) ( PO 007 )
Spooler: Request not found (RSPOENOJOB) ( PO 008 )
Spooler: Request is being processed or is locked (RSPOEBUSY) ( PO 009 )
Spooler: Error from TemSe management (RSPOERSTS) ( PO 011 )
Spooler: Character set conversion cannot be carried out (RSPOECONV) ( PO 012 )
Spooler: Invalid handling (RSPOEBADH) ( PO 013 )
Spooler: End of data (RSPOEODATA) ( PO 014 )
Spooler: Database has performed a roll back (RSPOEROLLBACK) ( PO 015 )
Change mode is not supported ( PO 017 )
Cannot save ( PO 018 )
Unknown error occurred, no message available (RC = &1) ( PO 022 )
Use access method 'G' instead of 'F' ( PO 040 )
Reserve spool work processes for processing group ( PO 051 )
Restrict the number of spool work processes for a processing group ( PO 052 )
Monitoring object: spool service processing group "administration tasks" ( PO 060 )
Monitoring object: spool service processing group "normal requests" ( PO 061 )
Monitoring object: spool service processing group "frontend requests" ( PO 062 )
Monitoring object: spool service processing group "high volume printing" ( PO 063 )
Monitoring object: spool service processing group "production printing" ( PO 064 )
Monitoring object: spool service processing group "desktop printing" ( PO 065 )
Monitoring object: spool service processing group "test printing" ( PO 066 )
Monitoring summary: spool service processing groups ( PO 069 )
& spool requests deleted ( PO 101 )
Spool request & deleted ( PO 102 )
Error & ( & ) deleting spool request & ( PO 103 )
Output request created for spool request & ( PO 104 )
Error &1 ( &2 ) creating output request ( PO 105 )
Spool request & missing ( PO 106 )
No output request exists for this device ( PO 107 )
No output request exists for this spool request ( PO 108 )
No spool request exists for the specified selection ( PO 109 )
This is the first spool request ( PO 110 )
Output device & is not defined ( PO 111 )
Internal error &/& in spooler (&) ( PO 112 )
This is the last spool request ( PO 113 )
Select a request ( PO 115 )
Enter the physical name of the output device ( PO 117 )
Illegal expiration time ( PO 121 )
Only & lines of the spool request were printed ( PO 122 )
Spool request & no longer exists ( PO 126 )
Fatal I/O error in database (see system log; spool ID &) ( PO 127 )
Place the cursor on a valid line ( PO 128 )
Output device & could not be saved ( PO 131 )
Device type & could not be saved ( PO 134 )
No print controls exist for device type & ( PO 135 )
Page format & could not be saved ( PO 139 )
Page format & does not exist ( PO 140 )
Start the format with "X", "Y", or "Z" ( PO 142 )
Format & could not be saved ( PO 144 )
Format & already exists ( PO 145 )
Character set & could not be saved ( PO 148 )
SAP character & could not be saved ( PO 153 )
Manufacturer & could not be saved ( PO 156 )
Data record already exists ( PO 160 )
Invalid character set ( PO 161 )
No formats exist for device type & ( PO 164 )
Character number & already exists ( PO 166 )
Character number & is not defined ( PO 167 )
Invalid hex value ( PO 170 )
Specified character number was too big ( PO 172 )
Print request identical to print request & was created ( PO 173 )
Function not active for changed screen contents ( PO 174 )
Print control & already exists ( PO 184 )
Print control cannot be displayed ( PO 186 )
Action data was written to the temporary buffer ( PO 188 )
Action changes were not saved ( PO 189 )
No further changes made to action data ( PO 195 )
Format & does not exist ( PO 196 )
Invalid driver name ( PO 197 )
Field contents H, V and D are defaults ( PO 198 )
All standard print controls used ( PO 199 )
Print control & could not be saved ( PO 203 )
Print control & already exists ( PO 206 )
The device type & does not contain print control & ( PO 207 )
The device type & does not contain any print controls ( PO 208 )
Insertion is not possible at present ( PO 209 )
The print control field for this line is already filled ( PO 210 )
At least one print control field must be filled for printout ( PO 211 )
Device type & is already in use ( PO 212 )
Page format & & is already in use ( PO 213 )
Format type & is already in use ( PO 214 )
SAP character & is already in use ( PO 215 )
Character set manufacturer & is already in use ( PO 216 )
Character set & is already in use ( PO 217 )
Device type &1 has no format type &2 ( PO 220 )
Device type & already exists ( PO 223 )
Device &1 is already used in output requests or pools ( PO 227 )
The output was limited to & pages. ( PO 229 )
You do not have this authorization ( PO 230 )
No authorization to change device type & to & ( PO 233 )
No authorization to change number of copies ( PO 234 )
No authorization to change priority ( PO 235 )
No authorization to change title attributes ( PO 236 )
No authorization to change archive device ( PO 237 )
Output device "&" not known ( PO 238 )
No authorization to change fax number ( PO 239 )
No authorization for device "&" ( PO 240 )
Frontend printing was cancelled. ( PO 246 )
Action & already exists ( PO 248 )
Enter area / beginning / end ( PO 258 )
No ID available for local request ( PO 260 )
Page format &2 (orientation &3) not implemented by device type &1 ( PO 265 )
You must adjust the device configuration tables ( PO 269 )
&1 is not permitted as the first character of an output device name ( PO 272 )
Global diversion already active, try again later ( PO 273 )
No blank spaces allowed in host spool device names ( PO 274 )
Access method 'F' requires LPRINT version 20.33 for blank characters ( PO 279 )
Spool update: Time required for conversion: &1 ( PO 294 )
Spool update: unexpected entries for format type &1 (&2) ( PO 295 )
Spool update: &1 format types were applied for &2 device types ( PO 296 )
Spool update: &1 format types updated ( PO 297 )
Spool update: Error occurred creating format type &1 for device type &2 ( PO 298 )
Spool update: Unable to update format type &1 ( PO 299 )
Spool object & has a write lock ( PO 302 )
Multiple selection not supported ( PO 303 )
Device & does not have format & ( PO 304 )
Output request no longer exists ( PO 306 )
Output request already completed ( PO 307 )
Output requests deleted, host spool will continue ( PO 309 )
This request can only be archived ( PO 315 )
No display authorization ( PO 318 )
No authorization to delete request & ( PO 319 )
No authorization to repeat printout ( PO 320 )
No authorization for re-routing to a different printer ( PO 321 )
No authorization for re-routing to a different printer type ( PO 322 )
No authorization to change attributes ( PO 323 )
Attempt to archive this request was unsuccessful ( PO 324 )
The OTF module was initialized ( PO 327 )
The OTF module was called with the first command ( PO 328 )
The OTF module was ended after &1 OTF commands ( PO 329 )
OTF module: Failed to output print data ( PO 330 )
OTF module: Character set conversion &1 -> &2 failed ( PO 338 )
OTF module: Memory request for page buffer failed ( PO 340 )
OTF module: Bit-map screen not printed due to lack of memory ( PO 343 )
OTF module: Failed to set language environment for lang. & ( PO 344 )
No server definitions for external RFC destinations ( PO 346 )
Server definitions may have to be processed after the import ( PO 347 )
Device & is not a permitted print destination ( PO 350 )
Device & is not a permitted archive destination ( PO 351 )
You are not authorized to print to device & ( PO 352 )
Enter a destination host ( PO 357 )
No authorization to print this request. ( PO 358 )
No authorization to delete this print request. ( PO 359 )
Server & is not active ( PO 360 )
Server & does not have a spool work process ( PO 361 )
& output requests redirected to server & ( PO 362 )
The device pool must contain at least one device ( PO 364 )
The pool name & must not appear in the device list ( PO 365 )
Not all device types match the pool device type ( PO 367 )
Not all device classes match the pool device class ( PO 368 )
No print controls defined for tray selection for device type & ( PO 372 )
Specify a host printer name ( PO 379 )
This function is not possible in display mode ( PO 380 )
Protected connections only possible with access method 'S' ( PO 384 )
Operating system query not possible for protected connection ( PO 386 )
**** Device definitions MUST be processed later in the target system *** ( PO 394 )
Device cache reset as a long host name changed ( PO 397 )
*** ROMS/LOMS definitions must be processed later in the target syst. *** ( PO 398 )
Entry & does not exist ( PO 405 )
Entry & does not exists ( PO 407 )
Blanks are not allowed in the name ( PO 408 )
Incorrect classification of the format type server (&1) ( PO 416 )
Access error ( PO 418 )
Enter a character width (font metric) > 0 ( PO 426 )
A different driver (&) is used in the header entry for the device type ( PO 427 )
A different driver (&) is used for SAPscript printing ( PO 428 )
Format does not contain any syntactical errors ( PO 439 )
Self-reference in standard device type ( PO 441 )
Do not specify short printer URIs ( PO 444 )
No LPD running; A new (SAP)LPD could not be started ( PO 450 )
(SAP)LPD was started, but connection not possible ( PO 452 )
File &1 could not be created on the frontend (RC = &2) ( PO 457 )
Could not call program 'LPRINT' (RC = &1) ( PO 458 )
Alternate server &1 has never been active; check spelling ( PO 473 )
No spool service assigned to server &1 (either directly or indirectly) ( PO 478 )
Cannot find e-mail address ( PO 486 )
You are not authorized to print using e-mail ( PO 495 )
Device type &1 converted to compatible device type &2 ( PO 509 )
Not supported: ADS spool request can only contain one part ( PO 512 )
Server for frontend printing not started. Session missing ( PO 536 )
Unable to reach the remote host spool system ( PO 537 )
Frontend printing not possible from background processing. ( PO 540 )
Processing of &1 front-end requests restarted (&2 reactivated) ( PO 545 )
Reactivation is currently being executed ( PO 546 )
Processing of &1 front-end requests restarted ( PO 547 )
Parameter error (&1) calling a cache C call ( PO 549 )
Dispo 1 (Go/Hold) &1 ( PO 611 )
Failed to access rstsgci (Code &1) ( PO 633 )
Customer extension for authorization check in use. ( PO 642 )
Frontend control cannot be created ( PO 643 )
Host &1 cannot be reached or (SAP-)LPD is not running there ( PO 747 )
Connection security requested not possible by spool WP ( PO 761 )
Frontend printing already in process ( PO 778 )
Cannot read user data for &1 ( PO 779 )
Cannot read list of frontend printers ( PO 781 )
Name of frontend printer not found, using default printer ( PO 782 )
&1 ( PO 792 )
This scenario is not supported ( PO 795 )
XDC file does not exist on the default ADS server ( PO 796 )
Not possible to check XDC file (refer to long text) ( PO 797 )
Security required for data transfer not met ( PO 819 )
Not deleting print file (disk capacity?) ( PO 825 )
A log is always generated for output device &1 ( PO 826 )
Command record '&1' not maintained ( PO 827 )
This device type does not have a Unicode Reference Device Type ( PO 830 )
Change lock due to After Import Phase ( PO 833 )
Printer &1 is centrally managed and cannot be deleted ( PO 840 )
Alias name must not be longer than &1 character ( PO 842 )
Problem with device type in output device &1 ( PO 843 )
Seq. request proc. not possible with acc. method C/L and _AUTOSPOOLSERVER ( PO 862 )
Caution: additional settings required (see long text) ( PO 865 )
Spool request &1 is still being described; action is not possible. ( PO 894 )
An accrual object was created for purchase order &1 item &2 &3. ( POAC 011 )
Enter accrual type in field &1 for purchasing doc. type &2 / &3. ( POAC 013 )
No accrual object was created for the combination of &1, &2, and &3. ( POAC 014 )
Error; BOR event &1 for BOR object &2 was raised but could not be mapped ( POC_BOR 001 )
Could not map BO Type &1 to BOR Object Type in system &2 ( POC_BOR 003 )
Exception occured: &1 ( POC_MAIN 001 )
Error in finding the BRFplus ruleset &1 ( POC_MAIN 003 )
System error; cannot add message to application log header ( POC_MAIN 006 )
Current version is not set for process definition &1 ( POC_MAIN 010 )
An active job is already scheduled for 1 or more reports; see long text ( POC_MAIN 020 )
Business function not activated for Process Observer ( POC_MAIN 021 )
Logging is not active for Process Observer ( POC_MAIN 022 )
Tracing started in program &1 at &2 ( POC_MAIN 027 )
Error during mapping; process status is not mapped to system status ( POC_MAIN 041 )
Configuration value not found for parameter &1; enter a valid value ( POC_MAIN 042 )
System error; connection setting not maintained for logical system &1 ( POC_MAIN 081 )
Invalid classification KPI for process definition &1;&2, KPI ID &3 ( POC_MAIN 083 )
System error; cannot connect to the master registry ( POC_MAIN 131 )
Remote logical system not found; enter system in Customizing ( POC_MAIN 135 )
System error; cannot read federated process logs from remote system &1 ( POC_MAIN 136 )
&1: Cannot retrieve master system details ( POC_MAIN 137 )
&1: Cannot read master registry details from master system &2 ( POC_MAIN 138 )
Authorization checks for process definition are inactive. ( POC_MAIN 203 )
BRF application &1(&2) is missing; business rule cannot be created ( POC_MAIN 301 )
Deletion of process definition not possible; process instances exist ( POC_MODEL 001 )
Provide either the activity or the item level task information ( POC_MODEL 050 )
Inconsistent combination of activity/task and determiner activity/task ( POC_MODEL 053 )
Inconsistent combination of start activity/task and end activity/task ( POC_MODEL 054 )
System error; DataSource cannot be called ( POC_PROVIDER 000 )
Table &1 is not defined for portfolio type &2 ( POFO 030 )
You cannot enter a profile for BOM items; portfolio type is invalid ( POFO 132 )
You cannot enter an alternative BOM; portfolio type is invalid ( POFO 133 )
Cannot determine whether alternative BOM &1 exists ( POFO 134 )
Inconsistent field catalog; check corresponding feeder ( POWL 002 )
Refresh failed due to internal exception; contact your administrator ( POWL 015 )
Query '&' is already open in another session ( POWL 016 )
Last query refresh failed due to internal errors; contact your admin. ( POWL 019 )
Reading additional data ( POWL 032 )
Component details not available for POPUP_COMP in feeder implementation ( POWL 046 )
Object ID selections have been deleted due to change in object type ( PP 031 )
Report &1 is designated for deletion ( PP 032 )
Report &1 has been replaced by query &2, user group &3 ( PP 033 )
Report &1 has been replaced by report &2 ( PP 034 )
CUA with global role assignment is active. No indirect role assignment ( PP 037 )
Compare standard authorization with RHAUTUPD_NEW - Note 1865692 ( PP 038 )
Selected schedule too long, old values reset ( PP 247 )
System error: possible entries not possible with mode &1 ( PP 302 )
System error: invalid condition was used when calling possible entries ( PP 303 )
No unrelated objects found ( PP 305 )
System error: serious error occurred in possible entries ( PP 306 )
No possible entries can be displayed for object type &1 ( PP 307 )
Structure search could not be executed. ( PP 308 )
Line length greater than 3 ( PP 736 )
Factory Calendar ID & does not exist in BW ( PPBW 001 )
No order can be found for the selection criteria ( PPC0 001 )
Only &3 &4 have been confirmed for reporting point &1 of order &2 ( PPC0 002 )
Reporting point version for order &2 is locked by user &1 ( PPC0 004 )
Confirmation for reporting point &2 of order &3 is locked by user &1 ( PPC0 007 )
So far only &1 &2 for preceding reporting point &3 have been confirmed ( PPC0 008 )
Cause &1 is not defined in location &2 ( PPC0 009 )
A quantity has already been entered for rep. point &1 of matrix order &2 ( PPC0 011 )
Only &1 &2 yield has been confirmed so far ( PPC0 012 )
Only &1 &2 scrap has been confirmed so far ( PPC0 013 )
Confirmed start time after confirmed finish time ( PPC0 014 )
Input help for cause cannot be used without a location ( PPC0 018 )
Input help for reporting point cannot be used without order ID ( PPC0 020 )
Could not find highlighted orders ( PPC0 024 )
No authorization for activity &1 for location &2 and reporting point &3 ( PPC0 025 )
&1 &2 have been confirmed already for subsequent reporting point &3 ( PPC0 031 )
All confirmations are read in the system ( PPC0 032 )
Reporting point for predecessor &1 is not yet confirmed ( PPC0 033 )
Attention: Functionality can cause inconsistencies ( PPC0 034 )
Reporting point data is inconsistent ( PPC0 035 )
No output node for order &1 ( PPC0 036 )
No unique reporting point with which the goods receipt should occur ( PPC0 037 )
Distribution definition for location &1 is not maintained completely ( PPC0 040 )
Settings exist already: variances cannot be determined ( PPC0 041 )
Goods movements are determined again ( PPC0 042 )
Production activities are determined again ( PPC0 043 )
Goods movements and production activities are determined again ( PPC0 044 )
Could not determine the corresponding iPPE data ( PPC0 045 )
No version could be found for the reporting point structure ( PPC0 046 )
Mode cannot be changed ( PPC0 047 )
Mode cannot be changed, &1 already confirmed ( PPC0 048 )
Reporting point &1 cannot be confirmed in order &2 ( PPC0 049 )
The assignment of goods movements to reporting points is not unique ( PPC0 050 )
A quantity has already been created for reporting point &1 of order &2 ( PPC0 051 )
Subsequent processes are still open for a confirmation of order &1 ( PPC0 052 )
Order &1 has already been confirmed ( PPC0 054 )
Not possible to reset confirmation status for reporting point &1 ( PPC0 055 )
Cancellation has not yet taken place for reporting point &1 of order &2 ( PPC0 056 )
A conf. was created too quickly after the previous reporting point &1 ( PPC0 057 )
A confirmation with a later creation time already exists ( PPC0 058 )
Order data not current: Action cannot be carried out ( PPC0 059 )
Subsequent reporting point &1 has already been confirmed ( PPC0 061 )
Mode was changed ( PPC0 062 )
Cancellation indicator and quantity are not consistent ( PPC0 063 )
One or several errors have occurred during the creation of the conf. ( PPC0 064 )
Goods movements are not assigned to the confirmation ( PPC0 065 )
Error when reading the resource data in iPPE ( PPC0 103 )
Error when reading the activity data in iPPE ( PPC0 106 )
Corresponding source of supply could not be determined ( PPC0 114 )
Error reading run time object ( PPC0 115 )
Goods movements type is not permitted ( PPC0 116 )
Goods movements exist that contain errors ( PPC0 117 )
Only positive quantities are permitted ( PPC0 118 )
The duration of the production activities must be a positive value ( PPC0 119 )
Production activities with errors exist ( PPC0 120 )
At least one error occurred when entering the confirmation data ( PPC0 200 )
No Controlling data exists for resource &1 ( PPC0 214 )
Quantities have been rounded ( PPC0 226 )
New master data after confirmation was created (see long text) ( PPC0 500 )
Confirmation profile &1 does not exist ( PPC0 600 )
Enter a confirmation profile or maintain your user default ( PPC0 601 )
Maintain the confirmation profile in your user settings ( PPC0 602 )
Restriction for orders has priority over restriction for confirmations ( PPC0 610 )
Could not connect to liveCache ( PPC0 611 )
Error when changing the matrix entries ( PPC0 612 )
Cannot find an order that can be deleted for the selection criteria ( PPC0 613 )
Missing goods movement postings: order is not deleted ( PPC0 615 )
Confirmations for the cancelled order were not deleted ( PPC0 617 )
Planned orders with ATP-relevant components are not checked ( PPC0 620 )
& entries deleted ( PPC1AR 001 )
No entries were deleted ( PPC1AR 002 )
No backflushes for archiving found ( PPC1AR 003 )
No final backflush to be costed found ( PPC1CE 001 )
No goods receipt posting to be costed transferred ( PPC1CE 002 )
No backflush header transferred ( PPC1DM 001 )
Locking error reading the material data ( PPC1DM 004 )
Error reading material master record of &1 in plant &2 ( PPC1DM 005 )
Error reading material master record of &1 ( PPC1DM 006 )
Material &1 in plant &2 has no backflush profile ( PPC1DM 007 )
System cannot determine goods movement type ( PPC1DM 008 )
Incomplete material data in the component list ( PPC1DM 010 )
Incomplete data when creating a record for PPC_MAT_DET ( PPC1DM 011 )
Incomplete data when recording the backflush information ( PPC1DM 012 )
Master data for sales order &1 could not be determined ( PPC1DM 015 )
Non-valuated make-to-order production is not supported ( PPC1DM 016 )
No sales order specified although components from special stock ( PPC1DM 017 )
Data for determining reporting point structure missing ( PPC1DM 020 )
Production line does not exist in this version ( PPC1DM 021 )
Reporting point does not exist in this line ( PPC1DM 022 )
Production line already exists in this version ( PPC1DM 023 )
No reporting points transferred ( PPC1DM 024 )
Reporting point structure is inconsistent or too large ( PPC1DM 025 )
Not all necessary parameters were transferred ( PPC1DM 026 )
Line/version of an order may not change ( PPC1DM 027 )
The production version cannot be determined ( PPC1DM 028 )
One production line was copied several times ( PPC1DM 029 )
The unit of measure &1 cannot be converted to &2 ( PPC1DM 030 )
A goods movement without quantity was transferred ( PPC1DM 031 )
A production activity without duration was transferred ( PPC1DM 032 )
Backflush record with ID &1 already transferred with different contents ( PPC1DM 040 )
The BAPI structure for activities was not filled completely ( PPC1DM 051 )
Buckflush profile &1 does not exist ( PPC1DM 055 )
Number range object &1 not available ( PPC1DM 070 )
Interval &1 for number range object &2 not available ( PPC1DM 071 )
Critical error for number range object &1, interval &2 ( PPC1DM 072 )
Number range interval &1 for object &2 will soon be exceeded ( PPC1DM 073 )
Number range interval &1 for object &2 has been exceeded ( PPC1DM 074 )
Internal error: &1 (backflush terminated) ( PPC1DM 100 )
Internal error: &1 ( PPC1DM 101 )
Communication error during RFC in the target system &1 ( PPC1DM 320 )
System error in RFC in the target system &1 ( PPC1DM 321 )
Corrupt entry in table PPC_HEAD ( PPC1DM 322 )
Table with header information locked by user &1 ( PPC1DM 505 )
Error determining the line or reporting point structure ( PPC1DM 506 )
Backflush currently locked by user &1 ( PPC1DM 507 )
Line &1 does not exist in version &2 ( PPC1DM 508 )
Insufficient data for determining repetitive manufacturing profile ( PPC1DM 510 )
Reporting point level could not be determined ( PPC1DM 514 )
Backflush profile &1 not found ( PPC1DM 515 )
An error occurred in method &2 of BADI &1 ( PPC1DM 516 )
No repetitive manufacturing profile was transferred ( PPC1DM 520 )
No table key for postprocessing header table transferred ( PPC1DM 522 )
Production version &1 &2 &3 not found ( PPC1DM 523 )
Deletion indicator cannot be set ( PPC1DM 530 )
No scrap information exists for the specified backflush ( PPC1DM 540 )
No components can be determined as simultaneous backflush ( PPC1DM 550 )
An error occurred while reading the resource data in iPPE ( PPC1IP 003 )
An error occurred while reading the activity data in iPPE ( PPC1IP 006 )
Specify a server group for parallel processing ( PPC1PA 001 )
All processes were processed ( PPC1PR 010 )
Too many application errors: processing terminated ( PPC1PR 011 )
System error: processing terminated ( PPC1PR 012 )
Communication error: processing terminated ( PPC1PR 013 )
No process reversal: processing terminated ( PPC1PR 014 )
No free resource: processing terminated ( PPC1PR 015 )
Not all started processes reversed ( PPC1PR 016 )
Backflush processing is currently locked by & ( PPC1PR 020 )
Not possible to write postprocessing records for activities ( PPC1PR 050 )
Too many postprocessing records for activities exist ( PPC1PR 051 )
Inconsistency of postprocessing records ( 'RSNUM' = &, 'RSPOS' = & ) ( PPC1PR 100 )
User &1 locking postprocessing records for assemblies &2 &3 ( PPC1PR 101 )
Activity postings could only be completed partially ( PPC1PR 208 )
No movement type exists for backflush profile &1 ( PPC1PR 209 )
Error when deleting ( PPC1PR 210 )
No details found for account assignment object &1 ( PPC1PR 211 )
No order number found for account assignment object &1 ( PPC1PR 212 )
No backflush system for account assignment object &1 ( PPC1PR 213 )
Activity postings were not executed ( PPC1PR 215 )
Too many material document items were required for assemblies &1 and &2 ( PPC1PR 216 )
Make at least one entry for error selection ( PPC1PR 302 )
Server group &1 does not exist ( PPC1PR 503 )
Communication error for &1 &2 with &3 ( PPC1PR 512 )
System error for &1 &2 with &3 ( PPC1PR 513 )
Time exceeded for &1 with &2 ( PPC1PR 514 )
Time exceeded for &1 (maximum number of free processes) ( PPC1PR 515 )
Time exceeded for &1 (waiting for confirmation of all processes) ( PPC1PR 516 )
Error in posting request; no documents were created ( PPC1PR 517 )
Error deleting line ( PPC1RA 002 )
Reprocessing is currently running ( PPC1RA 003 )
User &1 has no backflush authorization ( PPC1RA 005 )
Material &1 does not exist in plant &2 ( PPC1VA 001 )
Production version &1 does not exist for material &2 in plant &3 ( PPC1VA 002 )
Enter backflush data ( PPC1VA 008 )
Entries in the list could not be deleted ( PPC1VA 009 )
Checks have found no error for the current line ( PPC1VA 010 )
Variances entered successfully ( PPC1VA 012 )
Enter an activity ( PPC1VA 013 )
No controlling data exists for resource &1 ( PPC1VA 014 )
At least one error occurred during the entry of the backflush data ( PPC1VA 016 )
Variances were posted successfully ( PPC1VA 022 )
No check was performed ( PPC1VA 023 )
Data was checked ( PPC1VA 024 )
&1: &2 &3 &4 ( PPCXPRA 009 )
Log cannot be displayed ( PPC_REORG 004 )
No reorganization data was selected ( PPC_REORG 005 )
Cannot make change to standard capacity interval ( PPDS_CUO 020 )
An internal error occurred ( PPE4 002 )
Internal error in iPPE access object; see long text ( PPE4 004 )
Breakdown of &1 &2 in variant &3 is not maintained ( PPE4 103 )
Decomposition of &4 &3 is not possible using alternative &1 at node &2 ( PPE4 108 )
Decomposition of &4 &3 is not possible using alternative &1 at variant &2 ( PPE4 110 )
Decomposition of &4 &3 is not possible using variant &2 at node &1 ( PPE4 113 )
You must not enter a line structure for this process structure ( PPE4 148 )
Change from &1 not possible as at least one access is maintained ( PPE4 158 )
The iPPE access &1 will be created/changed when you next save ( PPE4 161 )
The iPPE access &1 will be deleted when you next save ( PPE4 162 )
Select a line ( PPE4 169 )
Mark a row that is not a template ( PPE4 170 )
The usage '&1' cannot be used with the access type '&2' ( PPE4 171 )
Action not possible as there are dependent access objects ( PPE4 173 )
The usage &3 &1 cannot be used with &2 ( PPE4 174 )
Variant contains fixed quantities and cannot be assigned to any &1 ( PPE4 180 )
Reference to &1 of this type is not allowed ( PPE4 181 )
&1 is a key in a planning matrix and cannot be deleted ( PPE4 191 )
The production version &1/&2/&3 is locked (Lock &4) ( PPE4 201 )
Status '1' on production version &1/&2/&3 is not allowed ( PPE4 202 )
Unallowed status change to production version &1/&2/&3 ( PPE4 203 )
Obj. dependency for &4 &1 at node &2 &3 is invalid for current config. ( PPE8 101 )
Priority of object dependency for item &4 &1 at node &2 &3 is too low ( PPE8 102 )
Standard &4 &1 at node &2 &3 is invalid; a different &4 is valid ( PPE8 103 )
Node &1 &2 has more than one valid &3 ( PPE8 104 )
Node &1 &2 has no valid &3; the node requires at least one ( PPE8 105 )
Several items are valid for alternative item group &1 ( PPE8 106 )
Historical status &1 of variant &2 at node &3 &4 is invalid ( PPE8 107 )
Historical status &1 of mode &2 at node &3 &4 is invalid ( PPE8 108 )
At node &1 &2 there is more than 1 standard variant ( PPE8 109 )
Variant &1 at node &2 &3 is not valid for class &3 ( PPE8 110 )
Mode &2 at activity &1 has not been maintained for the &3 &4 ( PPE8 111 )
No (clear) configuration for side access at node &1 &2 ( PPE8 115 )
Configuration is missing for the selection of variants at node &1 &2 ( PPE8 116 )
Could not determine a configuration valuation ( PPE8 202 )
Could not determine the color code from the colored &2 &1 ( PPE8 301 )
No valid access could be determined in the structure ( PPE8 302 )
Matrix explosion without line is not possible for &2 &1 ( PPE8 305 )
Object dependencies cannot be maintained for &1 &2 ( PPEACT 012 )
Usage for object dependencies must be activated for routing type &1 ( PPEACT 013 )
Start: Generally set the indicator MATFLOW in database table PRSEQ ( PPEACT 051 )
Errors occurred when accessing database table PRSEQ ( PPEACT 052 )
Scheduling data is incomplete for &1 &2 ( PPEACT 108 )
No capacity requirements maintained at &1 &2 for resource &3 ( PPEACT 109 )
The object dependency at &1 &2 is not active ( PPEACT 111 )
There can only be one activity with a scrap value under &1 &2 ( PPEACT 115 )
Scrap is only possible at the last production activity under &1 &2 ( PPEACT 116 )
Master reporting point for &1 &2 with scrap value in &3 &4 not allowed ( PPEACT 118 )
Reporting point allowed only at the last production activity under &1 &2 ( PPEACT 120 )
Only the first setup activity under &1 &2 can have a setup group ( PPEACT 121 )
There can be only one activity with a reporting point under &1 &2 ( PPEACT 122 )
Setup act. with setup group below &1 &2 can only be located at beginning ( PPEACT 123 )
Change numbers &1 and &2 at &3 &4 have the same "Valid from" date ( PPEACT 124 )
&1 &2 requires a reporting point that posts goods movements ( PPEACT 125 )
No primary resource has been specified at &1 &2 ( PPEACT 126 )
Specify a reporting point for each change status of &1 &2 ( PPEACT 127 )
Object type of &1 cannot be changed because of relationships ( PPEACT 202 )
No suitable object types found for object &1 ( PPEACT 203 )
Mode of a SA assignment at &1 &2 with plant &4 and SA &3 does not exist ( PPEACT 414 )
&1 &2 of a SA assignment at &3 &4 is not assigned to the latter ( PPEACT 415 )
SA assignment is ambiguous at &1 &2 for mode &3 and component &4 ( PPEACT 416 )
&1 &2 cannot have a setup group and setup key ( PPEACT 423 )
Variant &1 of object &2 &3 &4 has already been assigned ( PPEACT 452 )
Variant &1 is already indirectly assigned through the object &2 &3 &4 ( PPEACT 453 )
Component &1 &2 is not assigned to activity &3 ( PPEACT 456 )
Component &2 cannot be assigned to setup activity &1 ( PPEACT 457 )
Resource &1 &2 &3 has not been created ( PPEACT 503 )
Resource &1 at &2 &3 is not set for capacity planning ( PPEACT 508 )
&1 is not a time unit at &2 &3 ( PPEACT 535 )
Resource &1 is already defined as a secondary resource/reqmnt at &2 &3 ( PPEACT 545 )
No standard value determination type is defined for time analysis ( PPEACT 547 )
Mode &1 with change status &2 has already been historically deleted ( PPEACT 549 )
Reporting point at &1 &2 must be constant for all change statuses ( PPEACT 551 )
Mode linkage at &1 requires identical modes at &2 and &3 ( PPEACT 576 )
Resource linkage at &1 requires identical resources at &2 and &3 ( PPEACT 577 )
Object type &4 of &2 is different from object type &3 of &1 ( PPEACT 603 )
Objects &1 and &2 are indirectly linked on a lower level ( PPEACT 606 )
Only one relationship is allowed between activity &2 and &3 ( PPEACT 607 )
Objects &1 and &2 are not assigned to the same object ( PPEACT 608 )
No superior object found for object &1 ( PPEACT 610 )
Relationship between &1 type &3 and &2 type &4 cannot be maintained ( PPEACT 614 )
Activity &1 has already been assigned to object &2 ( PPEACT 615 )
Relationship is not valid between &1 type &3 and &2 type &4 ( PPEACT 618 )
The assigned activity &1 does not belong to the routing of assignmnt list ( PPEACT 625 )
Only mode linkage is allowed between primary resources under &1 &2 ( PPEACT 627 )
Under &1 &2 only 'end-start' relationships are allowed between &3 and &4 ( PPEACT 628 )
'Continual load res.' must be set between &3 and &4 below &1 &2 ( PPEACT 637 )
Hierarchy relationship between &1 and &2 cannot be deleted ( PPEACT 641 )
Hierarchy relationship is not allowed between &1 type &3 and &2 type &4 ( PPEACT 642 )
Inconsistency in mode linkage between &1 and &2 at mode &3 ( PPEACT 703 )
Inconsistency in resource linkage between &1 and &2 at resource &3 ( PPEACT 704 )
Time analysis control could not be linked ( PPEACT 751 )
Internal error creating or changing a time analysis ( PPEACT 752 )
Internal error deleting a time analysis ( PPEACT 753 )
You do not have authorization to maintain time analysis &1 ( PPEACT 755 )
There is no time analysis defined in the user profile ( PPEACT 756 )
Customizing for the time analysis control could not be read ( PPEACT 757 )
Internal error when reading a mode ( PPEACT 758 )
Internal error in dialog with time analysis control ( PPEACT 759 )
Internal error calling the data provider ( PPEACT 760 )
Internal error reading a time analysis ( PPEACT 763 )
An internal error occurred when assigning the time analysis ( PPEACT 765 )
Time analysis is already assigned to mode &1 ( PPEACT 766 )
No time analysis assigned to mode &1 ( PPEACT 769 )
&1 &2 is not included in the relationships of &3 &4 ( PPEACT 812 )
Relationships between activities at &1 &2 are interrupted &3 times ( PPEACT 813 )
Object &1 &2 is used several times in &3 &4 ( PPEACT 814 )
The reporting/action point &1 is used several times in &2 &3 and &4 ( PPEACT 815 )
At least one mode at &1 &2 must be available for automatic selection ( PPEACT 816 )
You have not maintained an activity in &1 &2 ( PPEACT 825 )
You have not maintained a mode for &1 &2 ( PPEACT 826 )
Recursive relationships have been maintained under &1 &2 ( PPEACT 828 )
CTM planning for &1 &2 only allows linear assigned activities ( PPEACT 851 )
CTM planning disallows &1 at &2 as only allowed at last activity ( PPEACT 855 )
The changes made do not affect existing production data structures in APO ( PPEACT 871 )
All fields must be corrected before further actions can be executed. ( PPEALV 002 )
PDS is being maintained by another user ( PPEAPO_BAPI 004 )
Internal error when locking PDS ( PPEAPO_BAPI 005 )
The function module PVSHI_CONVERT_DOCUMENT_ID is obsolete ( PPEAPO_BAPI 101 )
&1 &2 does not allow a reference to a class ( PPEAPO_CLASS 005 )
&1 &2 requires a reference to a class ( PPEAPO_CLASS 006 )
Database error during read access of table &1 ( PPEAPO_XPR 004 )
Database error during read access of table &1 ( PPEAPO_XPR 005 )
XPRA &1 has not yet run; XPRA &2 cannot run before XPRA &1 ( PPEAPO_XPR 008 )
Choose a product and/or focus structure ( PPEARCHCMP 053 )
&1 &2 is linked to &3 &4 ( PPEARCHCMP 101 )
&1 &2 is used in &3 &4 ( PPEARCHCMP 107 )
The planning resource cannot be assigned to line objects ( PPEBAL 005 )
Keys for line balance &1 do not match the existing line balance ( PPEBAL 102 )
Valid line balance (&4) already exists for &1 &2 from the &3 ( PPEBAL 113 )
Line balance relationship contradicts the planned line assignment ( PPEBAL 136 )
Line balances can not be created for factory layouts of type &1 ( PPEBAL 201 )
Validity of line balance &1 is later than 31.12.2037 ( PPEBAL 208 )
The evaluation of the model mix may take a long time ( PPEBAL 307 )
Activate parameter effectivity on the parameter variant tab page ( PPEBAL 404 )
&1 &2 was moved from &3 to &4 ( PPEBAL 423 )
GUID could not be converted ( PPEBAPI 004 )
Error when creating the access object &1 in module &2 ( PPEBAPI 006 )
Side access &3 for &1 &2 could not be read ( PPEBAPI 007 )
Internal error has occurred when reading the access &1 ( PPEBAPI 011 )
Level &1 is not recognized ( PPEBAPI 016 )
Internal error when converting material &1 &2 ( PPEBAPI 017 )
Internal error when converting the document &1 &2 &3 &4 ( PPEBAPI 018 )
Object dependency for &1 &2 could not be read ( PPEBAPI 020 )
Internal error restoring buffer ( PPEBAPI 031 )
BAdI &1 could not be instantiated ( PPEBAPI 032 )
You have not specified a material ( PPEBAPI 033 )
You have not specified a variant ( PPEBAPI 035 )
You have not specified a concept ( PPEBAPI 036 )
The function module PVSHI_CONVERT_DOCUMENT_ID is obsolete ( PPEBAPI 037 )
You cannot maintain relationships of type &1 ( PPEBAPI 050 )
Line balance ID &1 does not match external key &2 ( PPEBAPI 053 )
Model mix ID &1 does not match external key &2 ( PPEBAPI 054 )
Internal error calculating the internal key ( PPEBAPI 055 )
Internal key for alternative is missing ( PPEBAPI 072 )
Internal key for reporting point missing ( PPEBAPI 074 )
Internal key for model mix is missing ( PPEBAPI 075 )
Internal key for line balance is missing ( PPEBAPI 076 )
Reporting point &1 does not agree with external key &2 ( PPEBAPI 079 )
Supply area assignment to node &1 could not be created ( PPEBAPI 080 )
Error reading Customizing ( PPEBAPI 201 )
Error during the explosion ( PPEBAPI 202 )
Assemblies could not be serialized ( PPEBAPI 204 )
Data of variant &1 &2 are inconsistent ( PPEBAPI 205 )
The assembly reference at &1 &2 does not exist ( PPEBAPI 206 )
Object &1 of relationship &2 does not exist ( PPEBAPI 207 )
Internal error reading relationship &1 &2 ( PPEBAPI 208 )
Class &1 does not exist ( PPEBAPI 209 )
Data of node &1 are inconsistent ( PPEBAPI 210 )
Data of mode &1 are inconsistent ( PPEBAPI 211 )
Resource node &1 could not be read ( PPEBAPI 212 )
Internal error reading accesses for &1 &2 ( PPEBAPI 213 )
Error sorting the variants ( PPEBAPI 268 )
Error occurred when sorting the alternatives ( PPEBAPI 269 )
Error linking the grid control ( PPEBAPI 456 )
Internal error when reading the production version ( PPEBAPI 457 )
Application object type &1 is not recognized ( PPEBAPI 705 )
Incorrect object assignment for alternative &1 ( PPEBAPI 727 )
Problems converting object dependencies ( PPEBAPI 730 )
Problems converting the extended object dependencies ( PPEBAPI 731 )
Error messages for the object dependencies could not be read ( PPEBAPI 733 )
Internal key for the iPPE access is missing ( PPEBAPI 771 )
Internal error when calling &1 ( PPEBAPI 884 )
TDPP mode duration & ChgNo Conf: Act.: &1, Mode: &2, ECN: &3, PlngVer: &4 ( PPECCTDP 000 )
TDPP Capacity Cons & ChgNo Conf: Act.: &1, Mode: &2, ECN: &3, PlngVer: &4 ( PPECCTDP 001 )
TDPP component con & ECN conf: str node: &1, var: &2, ECN: &3, plng: &4 ( PPECCTDP 002 )
Fixed quantity in change status &1 of &2 &3 not valid with &4 ( PPECHK 120 )
Indicator - fixed quantity of &2 &3 with &4 not taken into account ( PPECHK 121 )
&1 &2 has already been assigned to the activities &3 and &4 ( PPECHK 202 )
&1 &2 has not been assigned to an activity ( PPECHK 203 )
Component variant &1 has already been assigned to activity &4 above &2 &3 ( PPECHK 204 )
No reporting point type defined for &1 &2 ( PPECHK 215 )
Action point &1 at line network &2 cannot be assigned to a line resource ( PPECHK 314 )
No priority selected for alternative line &1 (&2 &3) ( PPECHK 322 )
&1 &2 has no alternative lines ( PPECHK 324 )
Alternative line &1 is assigned at start &2 ( PPECHK 325 )
Activity &1 is not assigned to alternative line &2 between &3 and &4 ( PPECHK 406 )
Internal error in iPPE access object; see long text ( PPECHK 502 )
Unit &1 of bucket requirement at mode &2 has invalid dimensions ( PPECHK_APO 201 )
&1 from &2 to &3 cannot be created due to phantom reference (&4) ( PPECMP 051 )
Phantom reference from &1 &2 to &3 &4 is not allowed. ( PPECMP 052 )
Maximum &3 characters allowed for name (&2) of &1. ( PPECMP 102 )
Name of &1 contains invalid characters (Characters &3 at position &4). ( PPECMP 103 )
More than one alternative segment maintained as a document at variant &1 ( PPECMP 182 )
Enter a unit of measure for the quantity ( PPECMP 302 )
Unit &1 is not valid for &2 &3 ( PPECMP 303 )
Unit &1 is not defined ( PPECMP 305 )
No decimal places are defined for unit &1 ( PPECMP 306 )
Unit &1 can have a maximum of &2 decimal place(s) ( PPECMP 307 )
Entry of quantity and/or unit is invalid without reference to object ( PPECMP 315 )
&1 changes are not allowed in &2 of access level (&3) ( PPECMP 316 )
Entry of &1 is only allowed with &2 entry ( PPECMP 321 )
&1 &2 does not allow a class entry for &3 &4 ( PPECMP 323 )
When the standard indicator is set, object dependencies are not evaluated ( PPECMP 326 )
&1 &2 is not an access object for a variant assembly ((V)As) ( PPECMP 332 )
Dimension &1 is not planned ( PPECMP 336 )
No formula is maintained for key &1 ( PPECMP 337 )
Maintain the dimension for formula (key &1) ( PPECMP 338 )
Enter a positive quantity as a 'factor' for the phantom reference ( PPECMP 340 )
&1 &2 of &3 &4 is still used in access object ( PPECMP 351 )
Change status &1 for &2 &3 has a configuration ( PPECMP 366 )
Configuration data of &1 &2 cannot be copied to &3 &4 ( PPECMP 370 )
DMU information for &1 &2 cannot be copied to &3 &4 ( PPECMP 371 )
Creation of configurable materials or material variants is not allowed ( PPECMP 380 )
Delete change status &1 for &2 &3 without history? ( PPECMP 402 )
&1 &2 is maintained as shared position for change status &3 ( PPECMP 404 )
More than one change status has been checked at variant & ( PPECMP 503 )
Material &1 in &2 creates recursion via bill of material ( PPECMP 601 )
Material &1 in &2 creates recursion via follow-up material in BOM ( PPECMP 602 )
Relationship of node &1 to node &2 creates recursion via bill of material ( PPECMP 603 )
Relationship of &1 to &2 creates recursion via follow-up material in BOM ( PPECMP 604 )
The internal selection conditions exceed the maximum size ( PPECMP_REP 001 )
Color key &1 of &2 &3 does not exist ( PPECOL 301 )
When the standard indicator is set, object dependencies are not evaluated ( PPECOL 303 )
Maximum of &1 characters allowed for color key ( PPECOL 305 )
Color key &1 does not exist ( PPECOL 307 )
Configuration data of &1 &2 cannot be copied to &3 &4 ( PPECOL 310 )
&1 &2 cannot be assigned to this variant ( PPECON 012 )
No concept groups found to be assigned ( PPECON 017 )
Error while reading cProjects URL in cProjects system ( PPECPRO 010 )
Parameters of cProjects message: ID = &1, number = &2, variables &3 &4 ( PPECPRO 012 )
Error in cProjects system ( PPECPRO 013 )
System could not connect to cProjects system ( PPECPRO 071 )
Enter the required data ( PPECPRO0C 010 )
&1&2&3&4 ( PPEDI_CMPID 017 )
Production version &1/&2/&3 still exists in integration model &4 ( PPEDI_EXPL 010 )
Manual setting of status 2 in production version &1 not allowed ( PPEDI_EXPL 011 )
The XPRA &1 is not relevant during the upgrade ( PPEDI_XPR 001 )
A database error occurred when updating table &1 ( PPEDI_XPR 002 )
The proxy object for APO resource &1(&4) could not be created ( PPEDI_XPR 003 )
The created iPPE node &1 &4 has no application data ( PPEDI_XPR 005 )
No iPPE resource data was found for the created proxy object &1(&4) ( PPEDI_XPR 006 )
GUID &1 (&3) of table &2 (client &4) cannot be converted ( PPEDI_XPR 007 )
XPRA &1 is not relevant for the current start release ( PPEDI_XPR 012 )
Logical system not defined ( PPEENG 096 )
&1 &2 does not have a type ( PPEENG 102 )
Type &1 of &2 &3 has not been defined ( PPEENG 103 )
Creation of &1 &2 to &3 &4 is not allowed ( PPEENG 104 )
Deletion of &1 &2 to &3 &4 is not allowed ( PPEENG 105 )
No relationship type found between &1 and &2 ( PPEENG 106 )
No relationship type was selected ( PPEENG 107 )
&1 between &2 and &3 has no type ( PPEENG 108 )
Type of &1 between &2 and &3 has not been defined ( PPEENG 109 )
&1 &2 already exists with different internal key ( PPEENG 110 )
&1 &2 already exists ( PPEENG 111 )
&1 &2 does not exist ( PPEENG 112 )
&1 &2 is being edited by &3 ( PPEENG 113 )
Application object type &3 of &1 &2 cannot be changed ( PPEENG 114 )
&1 between &2 and &3 already exists ( PPEENG 117 )
&1 between &2 and &3 already exists with a different internal key ( PPEENG 118 )
&1 between &2 and &3 is being processed by &4 ( PPEENG 119 )
&1 &2 has been changed; changes may be lost ( PPEENG 126 )
&1 &2 still has relationships to other iPPE Objects ( PPEENG 130 )
&1 &2 does not allow a reference to a class ( PPEENG 131 )
&1 &2 requires a reference to a class ( PPEENG 132 )
&1 &2 is still used in variant(s) ( PPEENG 136 )
&1 &2 is still used in alternative(s) ( PPEENG 137 )
Class type &1 does not support configured objects ( PPEENG 138 )
&1 between &2 and &3 does not allow a new relationship of type &1 ( PPEENG 140 )
&1 between &2 and &3 does not allow a new relationship at &2 ( PPEENG 141 )
&1 between &2 and &3 does not allow a new relationship to &3 ( PPEENG 142 )
&1 between &2 and &3 cannot be deleted because of cardinality ( PPEENG 143 )
&1 between &2 and &3 cannot be deleted because of cardinality to &2 ( PPEENG 144 )
&1 between &2 and &3 cannot be deleted because of cardinality to &3 ( PPEENG 145 )
&1 between &2 and &3 must be compatible with the class hierarchy ( PPEENG 151 )
&1 between &2 and &3 not allowed because it causes recursion ( PPEENG 156 )
Original of &1 &2 is in logical system &3 ( PPEENG 159 )
&1 &2 still has variants ( PPEENG 165 )
&1 &2 still has alternatives ( PPEENG 166 )
&1 &2 still has dependent iPPE objects ( PPEENG 167 )
Label for &1 &2 contains invalid character '&3' ( PPEENG 170 )
&1 &2 has relationships that are not allowed for node type &3 ( PPEENG 190 )
&1 &2 has dependent objects that are not allowed for node type &3 ( PPEENG 191 )
&1 from &2 to &3 can be edited only with a change number ( PPEENG 416 )
&1 from &2 to &3 cannot be edited with a change number ( PPEENG 417 )
&1 &2 cannot be changed because of archiving selection ( PPEENG 559 )
&1 between &2 and &3 cannot be changed due to archiving selection ( PPEENG 560 )
&1 &2 cannot be deleted due to archiving selection ( PPEENG 561 )
&1 between &2 and &3 cannot be deleted due to archiving selection ( PPEENG 562 )
Archiving selection for &1 &2 can no longer be changed ( PPEENG 563 )
Archiving selection for &1 between &2 and &3 can no longer be changed ( PPEENG 564 )
Archiving selection for &1 &2 can no longer be deleted ( PPEENG 565 )
Archiving selection of &1 between &2 and &3 can no longer be deleted ( PPEENG 566 )
Long text for node &1 could not be read ( PPEENGBAPI 001 )
Long text for node &1 could not be created ( PPEENGBAPI 002 )
Long text for node &1 could not be deleted ( PPEENGBAPI 003 )
Buffer could not be reset ( PPEENGBAPI 004 )
No change documents were written for iPPE objects ( PPEENGBAPI 007 )
&1 for internal key &2 could not be read ( PPEENGBAPI 010 )
Long text for alternative &1 &2 could not be read ( PPEENGBAPI 013 )
Long text for alternative &1 &2 could not be written ( PPEENGBAPI 014 )
Long text for alternative &1 &2 could not be deleted ( PPEENGBAPI 015 )
An internal error has occurred while reading the node ( PPEENGBAPI 016 )
Internal key for the node is missing ( PPEENGBAPI 040 )
Internal key for relationship is missing ( PPEENGBAPI 073 )
Internal key for the variant is missing ( PPEENGBAPI 242 )
Problems while determining destination ( PPEENGBAPI 720 )
Error while creating IDoc ( PPEENGBAPI 721 )
Internal error initializing object dependencies ( PPEENGBAPI 734 )
Internal error reading change pointer(s) ( PPEENGBAPI 735 )
Change pointers could not be evaluated ( PPEENGBAPI 736 )
Internal error in message handling ( PPEENGBAPI 739 )
Customer include &1 is not recognized ( PPEENGBAPI 752 )
The access has changed; if necessary, please save filter &4 again ( PPEFILT 017 )
Field &1 is not assigned to a tab page ( PPEFILT 070 )
You cannot change the number of takts for &1 &2 ( PPEFLO 101 )
&1 between &2 and &3 is not possible ( PPEFLO 106 )
&1 between &2 and &3 is not possible ( PPEFLO 107 )
&1 &2 is already assigned to &3 &4 ( PPEFLO 108 )
Assign &1 &2 to a line resource ( PPEFLO 110 )
Resource &1 is not a line resource ( PPEFLO 111 )
Line resource &1 is already assigned to &2 &3 ( PPEFLO 112 )
&1 is not allowed for &2 &3 ( PPEFLO 117 )
&1 &2 already has alternatives ( PPEFLO 118 )
Alternatives cannot be created for &1 &2 ( PPEFLO 119 )
&1 &2 is not a valid production line ( PPEFLO 121 )
The priority for alternative line &1 (&2 &3) still has to be maintained ( PPEFLO 131 )
Action points &1 (&2) and &3 (&4) are at the same position on the line ( PPEFLO 401 )
Line explosion: Invalid object type &1 (&2) ( PPEFLO 402 )
Line explosion for &1 &2 is not allowed ( PPEFLO 403 )
Line explosion in execution mode is not allowed for &1 &2 ( PPEFLO 404 )
Standard path indicator is missing for &1 &2. Alternative &3 selected ( PPEFLO 405 )
Standard path indicator not clear for &1 &2. Alternative &3 selected ( PPEFLO 406 )
In line balance relatshp &1 to &2, &1 is not within line bal. line (&3) ( PPEFLO 407 )
Mode &2 to &3 in line balance &1 results in repeated activity in order ( PPEFLO 409 )
&1 is not assigned to alternative line &2 (&3) (Assignment created) ( PPEFLO 410 )
Mode &1 not relevant ( PPEFLO 412 )
Mode &1 is not assigned to line &2 ( PPEFLO 413 )
Mode &1 was not assigned in an active line balance ( PPEFLO 414 )
&1 &2 is used within &3 &4 several times ( PPEFLO 415 )
Assignmt of altern. line from &1 &2 to part of line network &3 missing ( PPEFLO 416 )
Asssignment of &1 &2 to part of the line network &3 missing ( PPEFLO 417 )
No valid line balance relationship exists for line structure &1 ( PPEFLO 419 )
Relationship between &1 &2 and &3 &4 recreated during explosion ( PPEFLO 420 )
You must assign a storage location at supply area &1 (&2) ( PPEFLO 421 )
Alternative &1 already exists ( PPEFLO 601 )
Part of line network &1 already exists ( PPEFLO 602 )
Access used up to now is no longer valid and will be deleted ( PPEFOC 018 )
There is no valid access to the model ( PPEFOC 019 )
The type for focus &1 does not allow changes to the explosion parameter ( PPEFOC 051 )
Focus &1 was completed and transferred when locked. ( PPEFOC 052 )
The type for focus &1 does not allow assignments to general iPPE objects ( PPEFOC 054 )
Focus &1 was changed; changes could be lost ( PPEFOC 253 )
The context object 'Focus' cannot be loaded. &1 ( PPEFOC 898 )
Variant type for node type &1 is not clear ( PPEGUI 002 )
Variant type for node type &1 has not been found ( PPEGUI 003 )
Object type &1 cannot be loaded ( PPEGUI 054 )
Node type & cannot be assigned to a class and is copied without a class ( PPEGUI 201 )
Node of & type requires complete assignment to class ( PPEGUI 202 )
&1 cannot be created because no work context '&2' is active ( PPEGUI 205 )
&1 cannot be created because work context '&2' is active ( PPEGUI 206 )
You cannot load objects of type &1 with your profile ( PPEGUI 302 )
Program errors ( PPEGUI 306 )
Customizing settings for the profile stop the program being executed ( PPEGUI 307 )
Assign yourself to a user profile ( PPEGUI 308 )
Expand was stopped due to limit in the number of objects for &1 ( PPEGUI 327 )
No layout found for profile &1 and object types &2, &3 ( PPEGUI 401 )
No tab titles found for layout &1 ( PPEGUI 402 )
No screen assignments found for tab title &1 ( PPEGUI 403 )
No assignments defined for screen &1 ( PPEGUI 404 )
No text found for tab title &1 ( PPEGUI 405 )
Create a layout in Customizing for the current object ( PPEGUI 406 )
No valid screen can be found for layout &1 ( PPEGUI 414 )
Database error during read-only access to table &1 ( PPEGUI 610 )
Database errors during write access to table &1 ( PPEGUI 615 )
You are not assigned a user profile for the iPPE Workbench ( PPEGUI 812 )
The profile &1 cannot be assigned to profile &2 ( PPEGUI 818 )
Adjust layout size ( PPELUICUST 008 )
Could not update node &1 ( PPEMPL 020 )
Could not update variant &1 ( PPEMPL 021 )
Could not update alternative &1 ( PPEMPL 022 )
Could not update relationship &1 ( PPEMPL 023 )
Could not update node type &1 ( PPEMPL 024 )
Could not delete model definition &3 ( PPEMPL 025 )
Could not update relationship &1 ( PPEMPL 026 )
Could not delete relationship &3 for display profile &1 ( PPEMPL 027 )
Could not delete model definition &3 for display profile &1 ( PPEMPL 028 )
Could not delete profile assignment &3 for user &1 ( PPEMPL 029 )
Node &1 has impermissible type: &3 ( PPEMPL 040 )
Variant &1 has impermissible type: &3 ( PPEMPL 041 )
Alternative &1 has impermissible type: &3 ( PPEMPL 042 )
Relationship &1 has impermissible type: &3 ( PPEMPL 043 )
Model definition &1 has impermissible object type: &3 ( PPEMPL 045 )
Relationship type &1 has impermissible object type: &3 ( PPEMPL 046 )
Could not create model definition &4 ( PPEMPL 065 )
Could not create relationship &4 for display profile &1 ( PPEMPL 067 )
Could not create model definition &4 for display profile &1 ( PPEMPL 068 )
Could not create profile &4 for user &1 ( PPEMPL 069 )
Could not set database lock for the table of nodes ( PPEMPL 070 )
Could not set database lock for the table of variants ( PPEMPL 071 )
Could not set database lock for the table of relationships ( PPEMPL 073 )
Cannot convert due to errors ( PPEMPL 080 )
MPL node &1 is not permitted as color reference ( PPEMPL 100 )
Recursion between PVS and MPL is possible ( PPEMPL 101 )
Connection between MPL and PVS objects is not permitted ( PPEMPL 102 )
Conversion run only useful in connection with SAP DIMP ( PPEMPL 103 )
You do not have authorization to start the conversion report productively ( PPEMPL 104 )
Productive start of conversion report is documented ( PPEMPL 105 )
Cannot run report in SAP SCM ( PPEMPL 106 )
Document &1 already exists for &2 &3 on the access level (&4) ( PPER3E_DOCID 002 )
The change number sequence (&1 <-> &2) is not unique ( PPER3E_ECN 020 )
No characteristics found for configuration valuation for material &1 ( PPER3E_EXPL 201 )
MRP with iPPE is not supported (material &1 plant &2 version &3) ( PPER3E_MRP 000 )
Unit of measure adjusted to the base unit of measure for the material ( PPERES 014 )
Action point &1 has already been assigned to a different application obj. ( PPERPP 113 )
Report. point with type &3 cannot be assigned at the beginning of &1 &2 ( PPERPP 117 )
Status object selected without specifying person responsible ( PPESCMPV 513 )
Status object is already in the workflow ( PPESCMPV 514 )
Error locking &1 against changes with &2 ( PPESCMPV 810 )
The sequence relationships of the activities under &1 &2 contain errors ( PPESNP 034 )
Object-specific statuses should also be created for the new status ( PPESTATUS 002 )
Data records still exist for status &1 ( PPESTATUS 003 )
Object-specific statuses should also be deleted ( PPESTATUS 005 )
All entries must have the same application type ( PPESTATUS 012 )
You must not delete all the object types for status &1 ( PPESTATUS 016 )
No status management exists for this iPPE object type ( PPESTATUS 022 )
No target status found for object type &1, application &2 ( PPESTATUS 132 )
There is no object type defined for status &1 ( PPESTATUS 134 )
Enter a valid product ( PPETDP_ECN_CONF_REP 000 )
Enter the iPPE object ( PPETDP_ECN_CONF_REP 001 )
Select at least one type of TDPP for running the report ( PPETDP_ECN_CONF_REP 002 )
Enter a valid planning version ( PPETDP_ECN_CONF_REP 003 )
Select a production version ( PPETDP_ECN_CONF_REP 004 )
You do not have sufficient authorization to use the tabular maintenance ( PPETIGUI 013 )
The quantity calculation requires a clear split ( PPETIGUI 014 )
Planning version &1 does not exist; enter a valid planning version ( PPEUITDP 000 )
The TDPP record already exists ( PPEUITDP 001 )
Enter a quantity ( PPEUITDP 002 )
Enter a valid unit of measure for the product ( PPEUITDP 003 )
Maintain reporting point type before maintaining scrap TDPP ( PPEUITDP 061 )
System cannot explode alternative &1 ( PPEXPL_CMP 000 )
Class where-used list chosen is not supported ( PPEXPL_CMP 001 )
Change state &1 of variant &2 has configurable phantom assembly ( PPEXPL_CMP 011 )
Alternative &1 in configurable product structure found ( PPEXPL_CMP 021 )
Component variant &1 in configurable product structure found ( PPEXPL_CMP 022 )
Database errors during write access to table &1 ( PPE_HDR_FILL 013 )
Database error during read-only access to table &1 ( PPE_HDR_FILL 014 )
Geometric instance &1/&2 (&3) inconsistent in buffer ( PPE_INST 011 )
Geometric instance &1/&2 (&3) currently being processed by &4 ( PPE_INST 021 )
Geometric instance &1/&2 currently being processed by &3 ( PPE_INST 023 )
Geometric instance &1/&2 (&3) must not be unlocked ( PPE_INST 050 )
Unit of measure for component variant &1 / &2 is unsuitable ( PPE_INST 203 )
Unit &1 is treated like the unit Piece (ISO Code PCE) ( PPE_INST 204 )
Unit of measure for assembly item &1 /&2 is unsuitable ( PPE_INST 209 )
Internal error while changing object dependency ( PPE_INST 251 )
Item: Type &1 document &2 item number &3 event id &4 is part of a loop ( PPE_MESSAGE 015 )
Reference date routine &1 does not exist ( PPE_MESSAGE 026 )
Reference date routine &1 is already assigned to event &2 ( PPE_MESSAGE 027 )
Reference date routine &1 is not in the reserved number interval ( PPE_MESSAGE 028 )
Number range for MRP Live not maintained. See long text. ( PPH_MRP 026 )
Number range for MRP Live not maintained correctly. See long text. ( PPH_MRP 027 )
Function only available for the HANA database system ( PPH_MRP 028 )
Error: Duplicate internal key exists ( PPH_MRP 031 )
Planning with forecast demand not supported in MRP Live on HANA ( PPH_MRP 146 )
Period lot sizes only supported for one period ( PPH_MRP 168 )
Share of safety stock for planning not supported in MRP Live on HANA ( PPH_MRP 180 )
No valid BOM for top-level material ( PPH_MRP 183 )
No valid BOM for phantom material ( PPH_MRP 184 )
No valid BOM status (T415S-KZAMS) ( PPH_MRP 185 )
No valid BOM status (T415S-KZAMS) for sales order or project ( PPH_MRP 186 )
Configurable material and configuration is missing ( PPH_MRP 187 )
Error in BOM explosion ( PPH_MRP 188 )
Class item with cat.&1 for BOM comp.&2 not supported in MRP Live on HANA ( PPH_MRP 189 )
Direct proc. with cat. &1 for comp. &2 not supported in MRP Live on HANA ( PPH_MRP 190 )
Scheduling agreements without release documentation not supported ( PPH_MRP 205 )
MRP Live on HANA does not support VC change of BOM item field: &1 ( PPH_MRP 211 )
MRP Live on HANA technical error - expected material not found in RTO: &1 ( PPH_MRP 212 )
Production versions for BOM explosion not supported in MRP Live on HANA ( PPH_MRP 213 )
Configurable matls cannot be planned with MRP Live on HANA: VC not active ( PPH_MRP 214 )
Configd matls produced in-house cannot be planned in MRP Live on HANA ( PPH_MRP 215 )
Error While accessing Goods Movements ( PP_MRP_ODATA 701 )
No Data exists for the User Selection Criteria ( PP_MRP_ODATA 702 )
Filter String Conversion Error in the Goods Movements ( PP_MRP_ODATA 703 )
Error While Reading User Telephone Number for &1. ( PP_MRP_ODATA 704 )
User does not exist ( PP_MRP_ODATA 705 )
Text ID for purchase order texts from app is not available ( PP_MRP_ODATA_PURCH 009 )
Text ID for purchase requisition texts from app is not available ( PP_MRP_ODATA_PURCH 010 )
Purchase order not created; no price exists in purchasing info record ( PP_MRP_ODATA_PURCH 011 )
Released operations for work center &1 not found ( PP_PRODOPS_CNF_ODATA 003 )
Technical error occurred while retrieving confirmations ( PP_PRODOPS_CNF_ODATA 005 )
Technical error occurred while retrieving the details of order ( PP_PRODOPS_CNF_ODATA 006 )
Technical error occurred while retrieving the details of goods movement ( PP_PRODOPS_CNF_ODATA 007 )
Reasons for scrap assigned to plant &1 not found ( PP_PRODORD_CNF_ODATA 001 )
Technical error occurred during the confirmation of order ( PP_PRODORD_CNF_ODATA 004 )
Technical error occurred while retrieving the details of the order ( PP_PRODORD_CNF_ODATA 005 )
Confirmations have been entered at operation level for order &1 ( PP_PRODORD_CNF_ODATA 006 )
You do not have authorization to do this ( PQ 000 )
& "&" was not deleted ( PQ 007 )
Choose one entry only ( PQ 011 )
No entries could be created for this object ( PQ 012 )
& & & cannot be edited at the moment ( PQ 017 )
Enter a text ( PQ 019 )
Edit "&" in the original language & ( PQ 020 )
&1 "&2" could not be found ( PQ 024 )
Duplicate entries were deleted from the table ( PQ 038 )
No valid object type could be found ( PQ 044 )
No description has been maintained for '&1' ( PQ 048 )
Data is missing ( PQ 050 )
Could not apply the data ( PQ 053 )
Date corrected ( PQ 054 )
Error occurred in scale definition for & & ( PQ 100 )
The scales for "&" and "&" are not compatible with each other ( PQ 106 )
Position the cursor on a &1 ( PQ 111 )
"&" cannot be edited ( PQ 112 )
& "&" has dependent entries and therefore cannot be deleted ( PQ 114 )
Create a scale first ( PQ 115 )
The scales for & & are not the same as the scale for "&" ( PQ 116 )
&1 entries were not deleted ( PQ 118 )
&1 entries were deleted. &2 entries could not be deleted. ( PQ 119 )
&1 entry was deleted. &2 entries were not deleted. ( PQ 120 )
&1 entries were deleted. &2 entry was not deleted. ( PQ 121 )
&1 entry was deleted. &2 entry was not deleted. ( PQ 122 )
Function module &1 is invalid ( PQ 151 )
The processing module &1 for the subappraisal will be deleted. ( PQ 157 )
This constellation is not possible for results input ( PQ 163 )
You can only create proficiency descriptions for quality scales ( PQ 164 )
Profile for object "&" is either incorrect or not edited ( PQ 200 )
Define profiles first ( PQ 205 )
You cannot define &2 for &1 ( PQ 206 )
"Unevaluated" is not allowed for the scale "&" ( PQ 207 )
The & requirements indiccated cannot be deleted ( PQ 208 )
You have not defined any suitability ranges ( PQ 301 )
No requirements exist ( PQ 302 )
No qualifications could be found ( PQ 310 )
This relationship is not allowed ( PQ 311 )
No requirements could be defined for object type "&" ( PQ 401 )
Unable to display all objects in the graphic ( PQ 450 )
Unable to display all objects in the graphic ( PQ 451 )
The module '&' does not exist ( PQ 500 )
& mandatory career items have already been defined in the current ranking ( PQ 506 )
Unable to create notes for the combination specified ( PQ 508 )
No qualification proposals could be found ( PQ 513 )
Development plan & does not exist ( PQ 514 )
No development plan states have been created ( PQ 515 )
Career & does not exist ( PQ 550 )
You do not have authorization to do this ( PQ 603 )
You have not defined a scale ( PQ 607 )
Uncertainty regarding scale ( PQ 608 )
Invalid relationship period ( PQ 609 )
Invalid proficiency ( PQ 610 )
Incorrect date format ( PQ 611 )
Error delimiting time constraint 1 ( PQ 618 )
Unable to find a qualifications catalog for the root object specified ( PQ 620 )
Unable to find a root object for the object type specified ( PQ 622 )
Incorrect object type ( PQ 632 )
Error when completing appraisal ( PQ 641 )
No further processing was triggered ( PQ 642 )
The "Created on" date is earlier than the period to be appraised ( PQ 654 )
An appraisal with this data already exists ( PQ 658 )
Error occurred during automatic calculation ( PQ 700 )
No &2 exists for &1 ( PQ 701 )
No valid combination is possible ( PQ 702 )
&1 missing ( PQ 703 )
Workflow (period: &2 - &3) is no longer possible for &1 ( PQ 705 )
No &1 defined in system ( PQ 707 )
&1 "&2" cannot be edited anymore ( PQ 710 )
No further processing was triggered ( PQ 716 )
Select an individual or a complete appraisal ( PQ 719 )
&1 "&2" selected as reference appraisal ( PQ 720 )
The results were recalculated ( PQ 721 )
The 'to-do' list is empty ( PQ 723 )
No appraisal models defined in the system ( PQ 727 )
Rating for "&1" was corrected ( PQ 730 )
An appraisal with this data already exists ( PQ 731 )
You want to display more than 32 entries in the graphic... ( PQ 740 )
Comment editing is not possible ( PQ 750 )
Delete scale & with ID 0 ( PQ 800 )
Define the proficiencies of scale & as serial numbers ( PQ 805 )
Define proficiencies for scale & ( PQ 806 )
Scales have already been defined ( PQ 807 )
Enter proficiency text &1 for the scale &2 ( PQ 808 )
Create a unit for the proficiencies of the scale & ( PQ 809 )
You must enter a value greater than or equal to 100% in the first field ( PQ 810 )
Do not specify gaps between suitability ranges ( PQ 813 )
Cannot save scale & ( PQ 815 )
Infotype structure "&" does not exist ( PQ 821 )
Infotype structure "&" is not allowed for the object type "&" ( PQ 822 )
Infotype structure "&" does not have a "&" field ( PQ 823 )
Specify an organizational unit in the user parameters ( PQ 824 )
Form of appraisal &1: the combination &2 - &3 will not be saved ( PQ 825 )
Processing module '&1' is not allowed ( PQ 826 )
&1 "&2" was not deleted since it is still in use ( PQ 827 )
Status & not defined ( PR 001 )
Forecast will not be carried out with this forecasr model ( PR 003 )
Until now no forecast values were saved ( PR 004 )
The forecast date must lie within the current or following period ( PR 005 )
No historical data exists ( PR 011 )
Internal error; notify the system administrator. ( PR 017 )
Function is not defined (check this) ( PR 019 )
Basic value will be zero ( PR 020 )
Not sufficient historical values available for initialization ( PR 021 )
Accounting periods are not defined correctly ( PR 023 )
Material has not been created ( PR 026 )
Version for fiscal year variant & does not exist ( PR 027 )
Replenishment lead time is greater than 999 days (check this) ( PR 031 )
Preparation canceled after & runs (check the selection) ( PR 032 )
No forecast values exist for calculating the reorder level ( PR 033 )
Safety stock not calculated as servive level=0 ( PR 034 )
No authorization for this function ( PR 037 )
Function is only active with period indicator "P" ( PR 038 )
This forecast model allows no further field in the profile ( PR 039 )
MRP controller & does not exist ( PR 047 )
This input value is not valid ( PR 048 )
Allocation to multiple error classes is not possible ( PR 051 )
Forecast run for plant & already started ( PR 134 )
Forecast profile & will be deleted; background job will run tonight ( PR 301 )
Forecast profile & will be changed; background job will run tonight ( PR 303 )
Table 441M does not have the entry for transaction code & ( PR 308 )
These two indicators cannot be set simultaneously ( PR 309 )
Forecast profile & exists already ( PR 312 )
The description for forecast profile & is missing in table T441T ( PR 313 )
No. of periods for initialization based on no. of consumption values ( PR 318 )
Number of fixed periods based on number of forecast periods ( PR 319 )
The model selection is not relevant for this forecast model ( PR 321 )
Set a forecast model or enter a model selection ( PR 322 )
You chose a model selection; now specify a selection procedure ( PR 323 )
Forecast model & requires the entry of a weighting group ( PR 326 )
Weighting group & has not been defined ( PR 327 )
Weighting group is not necessary for forecast model & ( PR 331 )
Either the model selection or the forecast model must be entered ( PR 333 )
Model selection & requires entry of smoothing parameter & ( PR 335 )
& can only be included in the profile with & ( PR 337 )
Either & or & in profile, not both (check this) ( PR 340 )
Season test not possible ( PR 400 )
Forecast values will be negative ( PR 402 )
Time series characteristic changed ( PR 403 )
Basic value cannot be recalculated (season index = 0) ( PR 404 )
Forecast value is greater than maximum value ( PR 408 )
Not possible to determine season indices (basic value = 0) ( PR 409 )
Not sufficient historical values available for model choice ( PR 410 )
No ex-post forecast possible ( PR 411 )
Not enough historical values exist for ex-post forecast ( PR 412 )
Season index cannot be re-calculated ( PR 413 )
Fewer historical values than entered ( PR 415 )
Too few historical values for parameter optimization ( PR 417 )
Model choice process 1 accessed ( PR 418 )
Model choice process 2 accessed ( PR 419 )
Season test is positive ( PR 420 )
Trend test is positive ( PR 422 )
Ex-post forecast carried out ( PR 424 )
Parameter optimization accessed ( PR 425 )
Overflow when calculating a seasonal index; 0 or 99.99 is set ( PR 429 )
Make the correct field entry in record & & & & ( PRAT 004 )
Condition &1: Invalid Condition Rate '&2' ( PRC_MESSAGES 060 )
IPC Currently not Available ( PRC_MESSAGES 714 )
Pricing/EURO: Attention: EURO Customizing not maintained ( PRC_MESSAGES 777 )
Condition &1: Invalid Condition Rate '&2' ( PRC_MESSAGES_EXT 060 )
&1&2&3 ( PRC_MESSAGES_EXT 098 )
Pricing document is already locked by user &1 ( PRC_MESSAGES_EXT 100 )
Required operation (mode &1) not permitted ( PRC_MESSAGES_EXT 130 )
Mode Change (&1 -> &2) Not Permitted ( PRC_MESSAGES_EXT 131 )
Reference Document (source document) not found ( PRC_MESSAGES_EXT 140 )
Pricing doc. does not exist ( PRC_MESSAGES_EXT 220 )
Pricing doc. does not exist ( PRC_MESSAGES_EXT 260 )
Internal error when temporarily saving pricing item ( PRC_MESSAGES_EXT 310 )
Pricing item not available ( PRC_MESSAGES_EXT 320 )
Pricing item is already available ( PRC_MESSAGES_EXT 325 )
Item is not relevant for pricing ( PRC_MESSAGES_EXT 360 )
Internal error when temporarily saving pricing condition ( PRC_MESSAGES_EXT 410 )
Pricing condition not available ( PRC_MESSAGES_EXT 420 )
Pricing: Application missing ( PRC_MESSAGES_EXT 501 )
Pricing: Pricing procedure missing ( PRC_MESSAGES_EXT 502 )
Pricing: Document currency missing ( PRC_MESSAGES_EXT 503 )
Pricing: Local currency missing ( PRC_MESSAGES_EXT 504 )
Pricing: Pricing date missing ( PRC_MESSAGES_EXT 505 )
Pricing: Use &1 is not valid ( PRC_MESSAGES_EXT 506 )
Parameter GROUP_PROCESSING and PARTIAL_PROCESSING exclude each other ( PRC_MESSAGES_EXT 510 )
Pricing: Item Number Missing ( PRC_MESSAGES_EXT 550 )
Error when calling up IPC (RFC destination &1) ( PRC_MESSAGES_EXT 600 )
& entries could not be deleted because downloaded ( PRC_MESSAGES_EXT 701 )
Entry cannot be deleted because downloaded from external system ( PRC_MESSAGES_EXT 702 )
IPC currently not available ( PRC_MESSAGES_EXT 714 )
Group condition must be marked in this constellation ( PRC_MESSAGES_EXT 726 )
Maintain unit of measure ( PRC_MESSAGES_EXT 728 )
Pricing migration skipped: test mode: &1; system type: &2. See long text. ( PRC_MIG_TRANSL_MSG 090 )
Data found in field KONV-&1 that is not in PRCD_ELEMENTS. See long text. ( PRC_MIG_TRANSL_MSG 091 )
Data found in field KONV-&1 that is not in PRCD_ELEMENTS. See long text. ( PRC_MIG_TRANSL_MSG 092 )
Data in deprecated field KONV-&1 no longer exists in PRCD_ELEMENTS ( PRC_MIG_TRANSL_MSG 093 )
Data in custom field KONV-&1 no longer exists in PRCD_ELEMENTS ( PRC_MIG_TRANSL_MSG 094 )
Not all rows in PRCD_ELEMENTS were processed. See long text. ( PRC_MIG_TRANSL_MSG 195 )
There was an SQL error in joining table &1. See long text. ( PRC_MIG_TRANSL_MSG 197 )
Condition &1 cannot be entered manually due existing condition record. ( PRC_PRI 204 )
Enter a number of weeks ( PREPAY 008 )
Open items were already transferred ( PREPAY 022 )
It is not possible to read the open items for contract &1 ( PREPAY 023 )
An initialization transaction already exists ( PREPAY 031 )
Repayment time exceeds maximum limit of &1 weeks. ( PREPAY 035 )
A selected open item was already transferred ( PREPAY 038 )
There are no open items for automatic selection ( PREPAY 039 )
You &1 is not authorized to use PRF Dashboard, Contact administrator. ( PRF_CNTRL_MSG 023 )
No configuration found for country:&1, doc type: &2 and co-code: &3 ( PRF_CNTRL_MSG 053 )
Source Doc. &2 of type &1 could not be locked. ( PRF_CNTRL_MSG 103 )
Please relaunch Screen from source. You cannot refresh the page. ( PRF_CNTRL_MSG 128 )
Selection Parameter &1 is neither a Field of Header or Item table of PRF. ( PRF_CNTRL_MSG 143 )
Exception Occurred for Query &1 Type &2 of Appl &3.Contact Administrator. ( PRF_CNTRL_MSG 145 )
Field name &1 from Source &2 is required, no change to DB. ( PRF_POWL_HANDLING 034 )
Entered value for field mode of field name &1 is invalid ( PRICING_UI 011 )
You are not allowed to delete the delivered entry &1 &2 ( PRICING_UI 020 )
Price fixation option setting missing or invalid for this view ( PRICING_UI 107 )
The system assumes that HR is not active ( PRM_CENTRAL_PERSON 007 )
There is no employee role in the SAP business partner ( PRM_CENTRAL_PERSON 008 )
The organizational unit &1 is not consistent ( PRM_CENTRAL_PERSON 009 )
Parameter 'I_MSGV3' should not be transferred together with 'I_TOTAL' ( PROGRESS_INDICATOR 050 )
Missing variable in transferred text or in transferred message ( PROGRESS_INDICATOR 051 )
Variabel &1 missing in transferred text or in transferred message ( PROGRESS_INDICATOR 052 )
Unable to determine roots of organizational plan ( PRP 002 )
The object &1 &2 &3 does not exist ( PRP 003 )
The &1 form is not active or does not exist ( PRP 004 )
A formatting error has occurred in the &1 form ( PRP 005 )
Communication with the WFM Core system is not possible ( PRP 035 )
Database commit failed in WFM Core ( PRP 039 )
Factory calendar & does not return any gross working time ( PRP 042 )
Person & is not known in WFM Core ( PRP 043 )
Time specification type does not exist in WFM Core ( PRP 046 )
WFD Server add-on or WFM Core add-on has not been installed ( PRP 047 )
No logical system is defined ( PRP 051 )
Error while creating groupware resource & ( PRP 052 )
Error while accessing groupware data ( PRP 076 )
WFM Core change is not supported for business partner & ( PRP 077 )
Error while accessing WFM Core data ( PRP 080 )
Groupware change is not supported for business partner & ( PRP 082 )
WFM resource of business partner & is still used in WFM Core ( PRP 083 )
E-mail address of groupware resource & is already being used ( PRP 084 )
WFM Core data was adjusted ( PRP 085 )
Could not save; WFM Core data could not be adjusted ( PRP 086 )
No responsible organizational unit for staffing assignment ( PRP 087 )
You cannot staff role &2 with resource &1 ( PRP 088 )
Maximum allowed total demand or assigned effort was exceeded ( PRP 089 )
Transaction PRP_WFM_ADMIN is obsolete ( PRP 090 )
WFM Core event handling: Import table is empty ( PRP 100 )
WFM Core event handling: Project &1 is locked ( PRP 101 )
WFM Core event handling: Project &1: Lock removal failed ( PRP 102 )
WFM Core event handling: Assignment not found in project &1 ( PRP 103 )
WFM Core event handling: Change to project &1, business partner &2 failed ( PRP 104 )
Specify more search criteria ( PRP 105 )
Resource &1 is already assigned to the favorites ( PRP_UI 001 )
Resource &1 is already assigned to the current role ( PRP_UI 003 )
Resource &1 could not be deleted ( PRP_UI 004 )
Date &1 is invalid ( PRP_UI 005 )
Time &1 is invalid ( PRP_UI 006 )
The entry in the "Subject" field is invalid ( PRP_UI 007 )
Start time &1 must be before end time &2 ( PRP_UI 008 )
Start &1 must be before finish &2 ( PRP_UI 009 )
Number format &1 is invalid ( PRP_UI 010 )
Business partner &1 &2 is locked centrally ( PRP_UI 011 )
Search function using general criteria is not available ( PRP_UI 012 )
Business partner number &1 is invalid ( PRP_UI 013 )
Weekly recurrence &1 of the periodic time description is invalid ( PRP_UI 014 )
Monthly recurrence &1 of the periodic time description is invalid ( PRP_UI 015 )
Day of month &1 of periodic time description is invalid ( PRP_UI 016 )
No day of the week is selected in the periodic time description ( PRP_UI 017 )
At least one visible column must be selected ( PRP_UI 018 )
Unable to access transaction &1 ( PRP_UI 019 )
Person will be notified by means of a groupware task ( PRP_UI 020 )
Error while sending the groupware task ( PRP_UI 021 )
Error while sending the groupware appointment ( PRP_UI 022 )
Person will be notified by means of a groupware appointment ( PRP_UI 023 )
Error while deleting the groupware task ( PRP_UI 024 )
Error while deleting the groupware appointment ( PRP_UI 025 )
Task is deleted in the person's groupware ( PRP_UI 026 )
Appointment is deleted in the person's groupware ( PRP_UI 027 )
No entries found ( PRP_UI 029 )
Restrict the search: maximum no. of hits: &1 ( PRP_UI 030 )
Enter a name; business partner was not created ( PRP_UI 031 )
Appointment will be deleted ( PRP_UI 033 )
Error while deleting the appointment ( PRP_UI 034 )
Appointment was created ( PRP_UI 035 )
Error while creating the appointment ( PRP_UI 036 )
Appointment will be changed ( PRP_UI 037 )
Error while changing the appointment ( PRP_UI 038 )
Combination of period and appointment rule is not valid ( PRP_UI 039 )
Select a single resource and at least one assignment ( PRP_UI 053 )
Select the resource for creating or changing the staffing of assignments ( PRP_UI 057 )
Select at least one task or at least one assignment ( PRP_UI 058 )
Assignment of task &1 to the role cannot be deleted ( PRP_UI 059 )
Assignment of task &1 to resource &2 cannot be deleted ( PRP_UI 060 )
Cannot create assignment of task &1 to the role ( PRP_UI 063 )
Cannot create assignment of task &1 to resource &2 ( PRP_UI 064 )
Source file could not be opened ( PS 001 )
Target file could not be opened ( PS 002 )
Cannot read source file ( PS 003 )
Cannot write target file ( PS 004 )
Cannot close output file ( PS 005 )
Sizes of source and target file are different ( PS 006 )
Transmission canceled by user ( PS 007 )
Source file has incorrect size ( PS 008 )
Transmission restart failed ( PS 009 )
Connection failed ( PS 010 )
Incorrect call of function module ( PS 011 )
Could not create file list ( PS 012 )
Function not available ( PS 013 )
RFC connection to EPS client was interrupted ! ( PS 017 )
EPS customizing table could not be read ! ( PS 018 )
EPS server table TEPSS could not be read ! ( PS 019 )
Parameter RECORDS_PER_TRANSFER has an invalid value ( PS 020 )
Graphics error ( PS 021 )
Transmission monitor could not be started ( PS 022 )
Restart in text mode not possible ( PS 023 )
No authorization for EPS ( PS 092 )
RFC connection failed ( PS 100 )
Could not set up connection to server ( PS 101 )
Could not read delivery requests ( PS 102 )
Parcel could not be created (rc = &1) ( PS 140 )
Delivery request could not be created (rc = &1) ( PS 141 )
Parcel &1 was successfully unpacked ( PS 151 )
Patch &1 was successfully unpacked ( PS 152 )
Parcel &1 cannot be unpacked ( PS 153 )
Parcel &1 has already been deleted ( PS 154 )
Cannot access parcel &1 ( PS 155 )
Parcel &1 could not be unpacked ( PS 156 )
File '&1' already exists ( PS 157 )
Patch &1 could not be unpacked ( PS 158 )
Parcel &1 is only suitable for operating system &2 ( PS 160 )
Parcel &1 is only suitable for database system &2 ( PS 161 )
Patch &1 is only suitable for operating system &2 ( PS 163 )
Patch &1 is only suitable for database system &2 ( PS 164 )
No parcels in the inbox for processing ( PS 200 )
File &1 cannot be opened ( PS 201 )
&1 parcels were processed ( PS 202 )
File &1 cannot be opened ( PS 205 )
File &1 cannot be read ( PS 206 )
No files available for processing ( PS 207 )
&1 parcels added to the EPS inbox ( PS 208 )
The parcel already exist in the EPS inbox ( PS 209 )
Internal error occurred ( PS4S 002 )
Unable to read Customizing settings for mass data processing ( PS4S 006 )
Unable to determine a suitable reconciliation key ( PS4S 007 )
You have not specified any server group ( PS4S 014 )
User is not authorized to access status confirmations ( PS4S_STATUS 005 )
User is not authorized to send status confirmations ( PS4S_STATUS 006 )
User is not authorized to delete entries ( PS4S_STATUS 007 )
Documents in trigger table without RFC destination ( PS4S_STATUS 009 )
Unable to send bundle due to communication error ( PS4S_STATUS 013 )
Unable to send bundle due to system error ( PS4S_STATUS 014 )
Document &1 does not contain any relevant items ( PS4S_STATUS 015 )
No documents found for which status confirmations can be sent ( PS4S_STATUS 016 )
Patch &1 could not be created ( PS 510 )
Milestone not found ( PSB_API_MSGCL 006 )
Object "&1" does not exist, or is not active for short texts ( PSB_API_MSGCL 013 )
Changed milestone data not available ( PSB_API_MSGCL 031 )
Operative project does not contain some objects that are in the draft ( PSB_API_MSGCL 061 )
Operative project contains new objects that are not in the draft ( PSB_API_MSGCL 062 )
Assignments in the operative project differ from assignments in the draft ( PSB_API_MSGCL 063 )
Draft hierarchy is identical to the operative project hierarchy ( PSB_API_MSGCL 064 )
Some objects not found in the project or network ( PSB_API_MSGCL 103 )
Project or network contains new objects ( PSB_API_MSGCL 104 )
Object assignments changed in the project or network ( PSB_API_MSGCL 105 )
Enter a valid unit of work or duration ( PSB_API_MSGCL 126 )
&1:&2 deleted ( PSB_API_MSGCL 130 )
You cannot change fact category &1; see long text ( PSCD_FACTS_EN 302 )
You cannot delete fact type &1 sequence &2; see long text ( PSCD_FACTS_EN 303 )
You cannot change fact category for fact type &1/seq. &2; see long text ( PSCD_FACTS_EN 304 )
You cannot set the mandatory indicator for &1 &2; see long text ( PSCD_FACTS_EN 305 )
You cannot remove this indicator for fact type &1/seq. &2; see long text ( PSCD_FACTS_EN 306 )
You cannot change fact type for fact set &1/sequence &2; see long text ( PSCD_FACTS_EN 308 )
You cannot remove this indicator for Fact Set &1/Seq. &2; see long text ( PSCD_FACTS_EN 309 )
You can't switch off time depndncy for fact set &1/seq. &2; see long text ( PSCD_FACTS_EN 310 )
You cannot delete fact set &1/sequence &2; see long text ( PSCD_FACTS_EN 311 )
You cannot change time dependency type for fact set &1 ( PSCD_FACTS_EN 312 )
Enter a valid ID of an independent network ( PSHLP_MSG_CL 006 )
You cannot load this draft; choose an XML draft ( PSHLP_MSG_CL 053 )
Drafts exist either for the current object or at least for a subobject ( PSHLP_MSG_CL 089 )
Milestone functions do not allow the creation of drafts of this object ( PSHLP_MSG_CL 117 )
&2 &1: Changes are not saved to the operative project ( PSHLP_MSG_CL 120 )
Simulation version of the current object (or its subobjects) exists ( PSHLP_MSG_CL 121 )
Draft and simulation versions of this object (or its subobjects) exist ( PSHLP_MSG_CL 122 )
Draft comparison of the selected node is not possible ( PSHLP_MSG_CL 123 )
Data not saved to the operative project ( PSHLP_MSG_CL 129 )
Data not saved to the operative project ( PSHLP_MSG_CL 130 )
Object locked; draft and simulation versions exist ( PSHLP_MSG_CL 132 )
Object locked; draft of this object (or subobjects) exists ( PSHLP_MSG_CL 133 )
Object locked; simulation version of this object (or subobjects) exists ( PSHLP_MSG_CL 134 )
Creation of asset under construction is not possible for WBS &1 ( PSHLP_MSG_CL 141 )
Deletion of asset under construction is not possible for WBS &1 ( PSHLP_MSG_CL 142 )
Select a cell or a line ( PSISSO 002 )
Error when selecting data in function module &1 ( PSISSO 010 )
You cannot execute the report ( PSISSO 019 )
You cannot execute the function ( PSISSO 025 )
Error in a scheduling module ( PSISSO 026 )
The parameters were not set ( PSISSO 040 )
You cannot add a WBS subtree ( PSI_LEAN_MSGCL 003 )
Errors occurred while reading log entries from system &1 ( PSJ_CORE 000 )
More than one category &1 entry is not permitted on sender/receiver side ( PSJ_CORE 011 )
Category &1 entries are inconsistent ( PSJ_CORE 012 )
Business function &1 is not active ( PSM_CASH_FLOW 001 )
Public Sector Management component is not active ( PSM_CASH_FLOW 003 )
Scenario &1 is not assigned to a general ledger ( PSM_CASH_FLOW 005 )
Zero balancing is not defined for characteristic &1 ( PSM_CASH_FLOW 007 )
General ledger with totals table &1 not found ( PSM_CASH_FLOW 009 )
Zero-balance clearing account for cash not defined ( PSM_CASH_FLOW 011 )
Cash flow reporting is not active for PSM component ( PSM_CASH_FLOW 013 )
Check determination for the RE_Account field ( PSM_CASH_FLOW 015 )
Update determination for the RE_Account field if necessary ( PSM_CASH_FLOW 016 )
Cannot use totals table PSGLFLEXT ( PSM_CASH_FLOW 017 )
Changes cannot be reversed when you save active ( PSM_FA_FKBER 009 )
Cost of sales actng in ccode &1 active; fnctnl area not allowed as char. ( PSM_FA_FKBER 011 )
Local control has not been enabled for archiving object &1 ( PSSC_ARCHIVING 021 )
No documents that match the selection criteria found ( PSSC_ARCHIVING 030 )
No results for indexed archive access to object &1 ( PSSC_ARCHIVING 032 )
Selected documents have already been archived and are therefore skipped ( PSSC_ARCHIVING 036 )
Do not use program &1 in production mode ( PSSC_ARCHIVING 043 )
&1 billing documents created; &2 NCDs updated ( PSSC_BILLING 027 )
&1 reversals created; &3 reversals assigned; &2 NCDs updated ( PSSC_BILLING 028 )
Execution with latest due date &4 (start=&1, unit=&2, factor=&3) ( PSSC_BILLING 037 )
For NCD &1 (BP &2) a billing doc is not created (due to predecessor NCD) ( PSSC_BILLING 044 )
For NCD &4 a billing doc is not created; contract account not determined ( PSSC_BILLING 045 )
Execution with partition size &1 (&2) ( PSSC_BILLING 062 )
Customizing entry &1 is not a valid value for partition size ( PSSC_BILLING 063 )
Data missing, document can not be created; implement BAdI &1 (ES &2) ( PSSC_BILLING 099 )
Invalid parameters calling a method; ObjectID is missing ( PSSC_BUFFER 017 )
Consistency check failed: '&OBJECTTYPE&' '&VERSIONID&' '&ITEMID&' ( PSSC_BUFFER 026 )
Consistency check failed: '&OBJECTTYPE&' '&ITEMGROUPID&' '&ITEMID&' ( PSSC_BUFFER 027 )
Consistency check failed: '&OBJECTTYPE&' '&SXPVERSIONID&' '&PSSCSXD&' ( PSSC_BUFFER 028 )
Invalid parameters calling a method; NCD Header Status is missing ( PSSC_BUFFER 041 )
Invalid parameters calling a method; NCD Header Status is invalid ( PSSC_BUFFER 042 )
NCD Header ObjectID &1 not found in NCD buffer (internal error) ( PSSC_BUFFER 043 )
NCD Header ObjectID &1 has already been deleted in NCD buffer (int. err.) ( PSSC_BUFFER 044 )
Invalid parameters calling method &2 (&1) ( PSSC_BUFFER 045 )
Invalid parameters calling method &1 (&2) ( PSSC_BUFFER 046 )
Invalid parameters calling method AGGREGATE_NCD (CL_PSSC00_BUFFER_NCD) ( PSSC_BUFFER 047 )
Invalid parameters calling a method; ItemgroupID is missing ( PSSC_BUFFER 048 )
ItemgroupID is not assigned to NCD Header ObjectID &1 (internal error) ( PSSC_BUFFER 049 )
Only new created NCD headers can be deleted from buffer ( PSSC_BUFFER 052 )
Only new created NCD items can be deleted from buffer ( PSSC_BUFFER 053 )
Attribute ObjectID is not supported for the selection of GPD headers ( PSSC_BUFFER 054 )
Attribute VersionID is not supported for the selection of NCD headers ( PSSC_BUFFER 055 )
Invalid data base operation indicator &1 for NCD header &2 ( PSSC_BUFFER 056 )
Invalid data base operation indicator &1 for NCD item &2 ( PSSC_BUFFER 057 )
Invalid parameters calling a method; ItemgroupID is missing ( PSSC_BUFFER 058 )
Invalid parameters calling a method; ItemID is missing ( PSSC_BUFFER 059 )
For ItemgroupID &1 does not exist a corresponding NCD header (int. error) ( PSSC_BUFFER 060 )
NCD document &1 does not have a payment frequency begin and/or end date ( PSSC_BUFFER 062 )
Payment frequency begin date is not less than or equal the end date ( PSSC_BUFFER 063 )
No ItemgroupID assigned to NCD document header &1 ( PSSC_BUFFER 064 )
No items assigned to ItemgroupID &2 of NCD header &1 ( PSSC_BUFFER 065 )
No ItemgroupID assigned to NCD document header &1 ( PSSC_BUFFER 066 )
Invalid parameters calling a method; VersionID is missing ( PSSC_BUFFER 072 )
Invalid parameters calling a method; ItemID is missing ( PSSC_BUFFER 073 )
Enqueue: Object &1 &2 already in use by &3 ( PSSC_BUFFER 200 )
Enqueue: Use either single or multiple Enqueue/Dequeue ( PSSC_BUFFER 202 )
Enqueue: Object &1 &2 &3 already in use by &4 ( PSSC_BUFFER 214 )
The decision category could not be updated for at least one SSP ( PSSC_CONFIG 022 )
The main partner could not be updated for at least one SSP ( PSSC_CONFIG 029 )
The benefit program could not be updated for at least one SSP ( PSSC_CONFIG 030 )
The SSP index could not be updated for at least one SSP ( PSSC_CONFIG 031 )
Eligibility periods could not be updated for at least one SSP ( PSSC_CONFIG 032 )
nZDM upgrade is running. Execution of SSP data migration not possible ( PSSC_CONFIG 033 )
Net calculation simulation failed while building net calculation units ( PSSC_CONTR 018 )
Net calculation simulation failed while executing net calculation ( PSSC_CONTR 019 )
Net calculation simulation failed while querying result ( PSSC_CONTR 020 )
No net calculation units have been determined (internal error) ( PSSC_CONTR 023 )
Gross Payment Document &1 (VersionID) not found ( PSSC_CONTR 024 )
SwitchGroupID and SwitchValueID for bgRFC inbound destination missing ( PSSC_CONTR 025 )
Maintain a bgRFC inbound destination for the initial net calculation ( PSSC_CONTR 026 )
SwitchGroupID and SwitchValueID for bgRFC queue prefix missing ( PSSC_CONTR 030 )
Maintain a bgRFC queue prefix for the initial net calculation ( PSSC_CONTR 031 )
Could not start net calculation by bgRFC for payment recipient &1 ( PSSC_CONTR 036 )
GPD Item &1 (VersionID &2) has no payment recipient number assigned ( PSSC_CONTR 037 )
Invalid method call; data supplied for multiple payment recipients ( PSSC_CONTR 050 )
Cannot execute function in ERP system; save data and restart transaction ( PSSC_CONTR 051 )
Deduction types &1 and &2 share same ranking &3; cannot save ( PSSC_CUST 010 )
Frq.MType &1 and Pmnt Fam. &2 have different Pmnt Frq. Types &3, &4 ( PSSC_CUST 018 )
RFC destination call &1 failed or does not exist ( PSSC_DBA 003 )
Transport request &1 type &2 has been selected ( PSSC_DBA 102 )
No AET extension exists for selected entity type &1 (&2) ( PSSC_DBA 115 )
Entity type does not contain an AET extension reference ( PSSC_DBA 118 )
System client &1 is not a Customizing client ( PSSC_DBA 119 )
No replication logs have been stored in database for replication mode &1 ( PSSC_DBA 123 )
No authorization for authority object &1 ( PSSC_DBA 125 )
GED &1 item &2: Item period is longer than period of GED ( PSSC_GROSS 006 )
Hold flag for GED item &1 was cleared due to existing items ( PSSC_GROSS 045 )
Inconsistency in GED item ( PSSC_GROSS 106 )
The specified gross entitlement document can't be processed ( PSSC_GROSS 109 )
Error while clearing gross payment information from buffer ( PSSC_GROSS 111 )
SXP item &2 not found unambigously ( PSSC_GROSS 115 )
GPI representing predecessor SXP item &2 not found ( PSSC_GROSS 116 )
No value found for latest date of approval (due date rule &1) ( PSSC_GROSS 120 )
No value found for reference date (due date rule &1) ( PSSC_GROSS 121 )
Follow-up SSP must be related to the same entitlement frequency &4 ( PSSC_GROSS 130 )
The calculation period must start after &1 ( PSSC_GROSS 131 )
Calculation period must start after &1 ( PSSC_GROSS 133 )
Delimitation check: A GPI attempts to delimit an already due payment (&2) ( PSSC_GROSS 136 )
Overlap of items in period from &1 to &2 ( PSSC_GROSS 139 )
Due date &1 of GPI must be later than reference date &2 (SXP type &3) ( PSSC_GROSS 160 )
Execution with partition size &1 (&2) ( PSSC_GROSS 233 )
Customizing entry &1 is not a valid value for partition size ( PSSC_GROSS 234 )
Sum of amounts is negative between &1 and &2 ( PSSC_GROSS 237 )
List shows extension component setup in source system &1 ( PSSC_HELPER 135 )
Error adjusting extension table &1 &2 ( PSSC_HELPER 136 )
Object &1 type &2 already exists and will not be overwritten ( PSSC_HELPER 137 )
Note: Please don't forget to adjust component structure &1 ( PSSC_HELPER 138 )
No authorization for reading AET metadata in source system &1 ( PSSC_HELPER 139 )
No authorization for reading DDIC object &1 type &2 in source system &3 ( PSSC_HELPER 140 )
No authorization for authority object &1 ( PSSC_HELPER 141 )
Invalid data format for gross payment item &2 (VersionID &1) ( PSSC_NET 005 )
Net calculation unit period &3 can not be limited ( PSSC_NET 008 )
Obligatory parameter &1 is missing or initial (class &2, method &3) ( PSSC_NET 009 )
No BAdI implementation exists for deduction type &1 ( PSSC_NET 020 )
Net calculation process failed ( PSSC_NET 024 )
Net calculation is only supported for finite time intervals ( PSSC_NET 028 )
The successor NCD for NCD &1 is not unique (internal error) ( PSSC_NET 031 )
Could not determine gross payment items for NCU &2, pmnt. frq. period &3 ( PSSC_NET 032 )
Deduction &2 of deduction type &3, priority &4 applied only partially ( PSSC_NET 034 )
Deduction &2 of deduction type &3, priority &4 is not possible ( PSSC_NET 036 )
Deduction type &2, priority &3 must be either perc. or amnt, not both ( PSSC_NET 039 )
Overflow calculating deduction amount, deduction type &2, priority &3 ( PSSC_NET 040 )
Net calculation not required; no relevant GPD items for processing ( PSSC_NET 042 )
Obligatory attributes not filled for item rule-based deduction type &1 ( PSSC_NET 043 )
Internal error calling function module &1; net calculation cancelled ( PSSC_NET 045 )
Unkown error calling function module &1; net calculation canceled ( PSSC_NET 046 )
Invalid data format; customer BAdI rule-based deductions ( PSSC_NET 049 )
Net calculation processing executed successfully for NCU &2 ( PSSC_NET 053 )
Parameter &1 is initial (class &2, method &3) ( PSSC_NET 057 )
Due date rule type &1 is not supported for payment frequency type &2 ( PSSC_NET 061 )
Error while checking NCU criteria for NCU &2 ( PSSC_NET 068 )
Gross Payment Document &1 (VersionID) has not yet been net calculated ( PSSC_NET 086 )
Deduction amount must not be positive; deduction type &2, priority &3 ( PSSC_NET 094 )
Deduction percentage must not be positive; deduction type &2, priority &3 ( PSSC_NET 095 )
Percentage not allowed for gross payment items ( PSSC_NET 096 )
Gross payment amount must conform to entitl./reduction process category ( PSSC_NET 097 )
Gross payment amount NCU &2, payment period &3 not determined ( PSSC_NET 110 )
Buffer controller instances must be identical ( PSSC_NET 114 )
Net calculation can not be executed for periods greater that &4 ( PSSC_NET 115 )
Period &1 limited to &2, net calculation not possible for greater periods ( PSSC_NET 116 )
Net calculation for NCU &2 until infinity (&3) is not supported ( PSSC_NET 117 )
Error updating the gross payment document items for NCU &2 ( PSSC_NET 121 )
Gross payment document &1 (VersionID) does not have any items ( PSSC_NET 122 )
Internal error; net calculation units not determined ( PSSC_NET 124 )
Net calculation document &3 created ( PSSC_NET 125 )
Net calculation document &1 updated ( PSSC_NET 126 )
Gross payment item &2 updated ( PSSC_NET 127 )
Currency rule-based deduc. &1, priority &2 different from stand. curr. &3 ( PSSC_NET 128 )
Net calculation is only supported for a restricted period in the future ( PSSC_NET 130 )
Due date for net calculation limitation &1 must not be lower as period &2 ( PSSC_NET 131 )
Due date &1 for next net calc. is later than due date &2 for limitation ( PSSC_NET 136 )
Gross Payment Document &1 has invalid appl. and/or tech. status ( PSSC_NET 138 )
Net calculation is not executed due to GPD items with invalid data format ( PSSC_NET 139 )
Item &2 of GPD &1 has invalid appl. and/or tech. status ( PSSC_NET 140 )
Item &2 of GPD &1 has already been net calculated (second execution) ( PSSC_NET 141 )
Internal error checking date restrictions net calculation limitation ( PSSC_NET 142 )
Could not enqueue payment recipient &1 for processing of NCU &3 ( PSSC_NET 148 )
Net calculation processing failed for all involved NCU's ( PSSC_NET 150 )
Error accessing the NCD buffer by net recalculation ( PSSC_NET 151 )
Internal error accessing mapping data entitlement to payment frequency ( PSSC_NET 159 )
Net calculation processing failed due to an int. error in buffer layer ( PSSC_NET 162 )
Internal error clearing the memory of the central buffer layer ( PSSC_NET 163 )
Internal error clearing the memory of the central buffer layer ( PSSC_NET 164 )
A new NCD is not required for NCU &1 &2, payment period &3 &4 ( PSSC_NET 166 )
Parameter &1 is not allowed for processing mode &4 (class &2, method &3) ( PSSC_NET 167 )
NCD &1 not found in local buffer table CT_NCD (internal error) ( PSSC_NET 171 )
NCD &1 not found in local buffer table CT_NCD_OLD (internal error) ( PSSC_NET 172 )
Authorization check for payment family &1 for processing of NCU &3 failed ( PSSC_NET 174 )
Authorization check for payment family &1 for processing of NCU &3 failed ( PSSC_NET 175 )
Net recalculation for payment recipient &1 has failed; invalid input data ( PSSC_NET 176 )
No NCDs available for payment recipient &1 for net recalculation ( PSSC_NET 177 )
Gross payment item process category &4 is not supported ( PSSC_NET 180 )
Regular gross payment items do not allow a due date (wrong data format) ( PSSC_NET 181 )
Gross payment item process category &4 is not supported ( PSSC_NET 182 )
More than one payment period assigned to extraordinary NCU &2 ( PSSC_NET 183 )
Extraordinary NCU &2 cannot be processed; regular NCU has errors ( PSSC_NET 184 )
Extraordinary NCU &2 is not being processed ( PSSC_NET 185 )
Invalid data format for net calculation document &1 (ObjectID) ( PSSC_NET 186 )
No due date assigned to net calculation document &1 (ObjectID) ( PSSC_NET 187 )
Net calculation not executed; NCD has invalid data format ( PSSC_NET 188 )
Net calculation of NCU &2 failed for payment period &3 ( PSSC_NET 189 )
Regular gross payment items do not allow a due date (wrong data format) ( PSSC_NET 190 )
'Gross payment item process category' required ( PSSC_NET 191 )
'Due date' required for gross payment item (wrong data format) ( PSSC_NET 192 )
'Due date' required for gross payment item (wrong data format) ( PSSC_NET 193 )
'Gross payment item process category' required ( PSSC_NET 194 )
GPD item &4 not found in local buffer table CT_GPDITEM_ALL (int. error) ( PSSC_NET 195 )
Data inconsistency while accessing the GPD items for processing ( PSSC_NET 196 )
Execution date for net calculation can not be determined for period &3 ( PSSC_NET 197 )
Next due date for net calculation ex. &1 must not be lower than period &2 ( PSSC_NET 198 )
&1 NCU found; &2 successfully processed; &4 not relevant ( PSSC_NET 316 )
Execution with partition size &1 (&2) ( PSSC_NET 320 )
Customizing entry &1 not a valid value for partition size ( PSSC_NET 321 )
Delimitation check: A GPI is trying to delimit a payment already due (&2) ( PSSC_REPL 003 )
An exception (error situation) has occured without an assigned message ( PSSC_TOOLS 001 )
Requested Customizing entries not available in language &1 ( PSSC_TOOLS 015 )
No active Customizing entry for frequency type &1 ( PSSC_TOOLS 016 )
No active Customizing entry for frequency mapping type &1 ( PSSC_TOOLS 017 )
No active Customizing entry for frequency mapping category &1 ( PSSC_TOOLS 018 )
No active Customizing entry for due date rule type &1 ( PSSC_TOOLS 019 )
No active Customizing entry for due date rule modifier &1 ( PSSC_TOOLS 020 )
No customizing entries have been determined ( PSSC_TOOLS 021 )
Frequency type not maintained ( PSSC_TOOLS 022 )
Frequency mapping category &1 is not valid ( PSSC_TOOLS 034 )
No active BAdI implementation for frequency mapping category &1 ( PSSC_TOOLS 035 )
No active BAdI implementation for due date modifier &1 ( PSSC_TOOLS 036 )
Payment period for due date calculation not specified ( PSSC_TOOLS 037 )
SXP type not specified to build periods ( PSSC_TOOLS 040 )
Entitlement periods for frequency &1 cannot be generated for &2 / &3 ( PSSC_TOOLS 041 )
Payment periods for frequency &1 cannot be generated for &2 / &3 ( PSSC_TOOLS 042 )
Specify either an SXP type or a Frq.Map Type / DDR type combination ( PSSC_TOOLS 043 )
Due date rule &1 is not valid for specified payment frequency &2 ( PSSC_TOOLS 044 )
System's factory calendar &1 ends on &2; requested factory date is &3 ( PSSC_TOOLS 047 )
Due date rule in selected SXP type &1 not maintained ( PSSC_TOOLS 048 )
Frequency mapping type in SXP type &1 not maintained ( PSSC_TOOLS 049 )
Specify a valid gross payment calculation period ( PSSC_TOOLS 052 )
Maximum date (31.12.9999) reached; no further date increase allowed ( PSSC_TOOLS 054 )
Minimum date (01.01.1900) reached; no further date decrease allowed ( PSSC_TOOLS 055 )
Factory calendar date cannot be determined for calendar &1 / date &2 ( PSSC_TOOLS 056 )
Check your Customizing settings: SXP type: &1, FrqMType: &2, DDRType: &3 ( PSSC_TOOLS 058 )
Only date values between 01.01.1900 and 31.12.9999 are valid ( PSSC_TOOLS 059 )
Processing of due date rule &1 failed for period &2 to &3 ( PSSC_TOOLS 060 )
Maximum number of entitlement periods limited to &1 entries ( PSSC_TOOLS 068 )
Maximum number of entitlement years limited to &1 years ( PSSC_TOOLS 069 )
Mapping Entity 1:n is not allowed for Frequency Map Type &1 / &2 ( PSSC_TOOLS 071 )
Enqueue/dequeue error; use either single or multiple enqueue/dequeue ( PSSC_TOOLS 152 )
Enqueue error; at least one object is locked ( PSSC_TOOLS 153 )
Error in Social Services date calculation tools ( PSSC_TOOLS 200 )
Error in Social Services period and due date calculation tools ( PSSC_TOOLS 201 )
Guaranteed minimum might not be fulfilled in time ( PSSRM_GM_ACC 022 )
Customizing for earmarked funds in backend incorrect; contact sys. admin. ( PSSRM_GM_ACC 024 )
Unit of measurement conversion failed between '&1' and '&2' in item &3 ( PSSRM_GM_ACC 034 )
Contract w/ acct assign. cat. CostCenter can't be used f. direct material ( PSSRM_GM_ACC 042 )
Errors occurred during document & processing; posting canceled ( PSSRM_SELPROM 015 )
Invalid selective release filter settings; inconsistent general settings ( PSSRM_SELPROM 020 )
No back-end system data available for document & ( PSSRM_SELPROM 022 )
Budget exceeded for document &; check Funds Management ( PSSRM_SELPROM 031 )
Document &: replication check timed out ( PSSRM_SELPROM 034 )
Document has the status 'Rejected' / 'Returned to User for Editing' ( PSSRM_SELPROM 041 )
Planner profile & is not suitable for payment plg in Project Cash Mgt ( PSZ1 001 )
Planner profile & is not suitable for planning in Cash Budget Management ( PSZ1 002 )
No WBS elements match the selection criteria ( PSZ1 003 )
The specified group of WBS elements contains no valid entries ( PSZ1 004 )
WBS element &1 not valid ( PSZ1 005 )
WBS element &2 is not assigned to FM area &1 ( PSZ1 006 )
WBS element &1 is not assigned to an FM area ( PSZ1 007 )
See error log ( PSZ1 008 )
Status forbids payment planning for WBS element &1 ( PSZ1 009 )
No commitment items exist for FM area &1 ( PSZ1 011 )
No commitment item exists in interval &1 - &2 or is suitable ( PSZ1 013 )
Commitment item &1 does not exist or is unsuitable ( PSZ1 014 )
Error during document number assignment ( PSZ1 017 )
&1 must not be defined in the key column ( PSZ1 018 )
&1 must be defined as a key column ( PSZ1 019 )
Form-based processing not possible ( PSZ1 021 )
Currency may only accept input as a key column ( PSZ1 023 )
The transaction currency column must be able to accept input ( PSZ1 024 )
Transaction currency must not be defined as an interval ( PSZ1 025 )
The data records are being processed by user &1 ( PSZ1 026 )
The +/- sign before the amount in commitment item &1 is incorrect ( PSZ1 027 )
Only "Year" is permitted as a characteristic in value columns ( PSZ1 028 )
Variable not allowed in tranaction currency key field ( PSZ1 029 )
"*" not permitted for commitment item key column ( PSZ1 030 )
Output device "&" not defined ( PT 001 )
Format "&" not defined for output device "&" ( PT 002 )
Position cursor on a valid line ( PT 003 )
Output device & is not defined ( PT 004 )
Value for number of lines is less than 1 ( PT 005 )
Value for column number greater than 1 ( PT 006 )
& are too many lines for format & ( PT 007 )
System cannot print the last & columns of the report ( PT 008 )
Format "&" not suitable for &2 lines ( PT 009 )
Printer '&' not suitable for printing graphics ( PT 010 )
Reciever "&" is not a valid user name ( PT 011 )
Object type "&" not defined ( PT 012 )
Document type "&" not defined for object type "&" ( PT 013 )
Archive ID "&1" not defined for object type "&2" and document type "&3" ( PT 014 )
No authorization for printer "&" ( PT 015 )
Printer name "&" is invalid -> Cannot print spool request immediately ( PT 016 )
No authorization for printer "&" -> No immediate print of spool request ( PT 017 )
Format is not wide enough for this character representation ( PT 018 )
No archive information found for object type &1 and document type &2 ( PT 019 )
Specify printer name ( PT 020 )
The parameter OUT_PARAMETERS is mandatory ( PT 021 )
The parameter VALID is mandatory ( PT 022 )
The printer parameters specified here might be changed dynamically. ( PT 023 )
Position the cursor on a field before executing the function ( PT 024 )
Incomplete list print-out due to a width > 255 ( PT 025 )
Document type & is not of the document class "ALF" ( PT 026 )
User & does not have authorization for this archiving procedure ( PT 027 )
Object type & cannot be archived with the document class "ALF" ( PT 033 )
Page by page storage of a list with structure information ( PT 035 )
This value cannot be applied as a default ( PT 039 )
Unknown archiving device ( PT 040 )
No authorization for archiving device ( PT 041 )
Could not determine a suitable format ( PT 045 )
The system can only perform this operation on an SAP printer ( PT 052 )
Printer properties changed ( PT 060 )
Structure information could contain errors ( PT 067 )
This validity area is not available ( PT 071 )
Footer does not contain a valid control character ( PT 075 )
Print & is not valid in this client ( PT 080 )
Complete data in archive mode ( PT 090 )
Unable to simulate trips with status 'Draft' ( PTRA_DIALOGUE 023 )
Unable to settle trips with status 'Draft' ( PTRA_DIALOGUE 024 )
Unable to cancel trips with status 'Draft' ( PTRA_DIALOGUE 025 )
Unable to print trips with status 'Draft' ( PTRA_DIALOGUE 026 )
Unable to edit trips with status 'Draft' ( PTRA_DIALOGUE 027 )
Unable to copy trips with status 'Draft' ( PTRA_DIALOGUE 028 )
Unable to approve trips with status 'Draft' ( PTRA_DIALOGUE 029 )
Unable to settle trip &1 with 'Draft' status ( PTRA_DIALOGUE 034 )
Unable to print trip &1 with 'Draft' status ( PTRA_DIALOGUE 035 )
Unable to post trip &1 with 'Draft' status ( PTRA_DIALOGUE 036 )
File &1 could not be found; correction required (see long text) ( PTRA_DIALOGUE 075 )
Unable to display trips with status 'Draft' ( PTRA_DIALOGUE 076 )
Entry of addresses in trip schema must be activated ( PTRA_DIALOGUE 083 )
Weekly report cannot be used with 60-day rule for Denmark ( PTRA_DIALOGUE 085 )
The extended cost assignment of the entire trip is incomplete ( PTRA_DIALOGUE 091 )
Vehicle master data updated based on trip date ( PTRA_DIALOGUE 092 )
Tax code &1 is not permitted for company code &2 ( PTRA_DIALOGUE 097 )
Warning: Meals deductions must be entered on 2nd calendar day ( PTRA_DIALOGUE 098 )
Changing trip provision variant by changing travel times is not allowed ( PTRA_WEB_INTERFACE 018 )
Trip country & does not exist in the system (T005) ( PTRA_WEB_INTERFACE 026 )
Dynamic assignment for & activated ( PTRA_WEB_INTERFACE 161 )
Community code number &1 of main destination is invalid for date/time &2 ( PTRA_WEB_INTERFACE 199 )
Community code number &1 of stopover is invalid for date/time &2 ( PTRA_WEB_INTERFACE 219 )
Express expense sheets not available ( PTRA_WEB_INTERFACE 233 )
Trip break from &1 &2 to &3 &4 not possible ( PTRA_WEB_INTERFACE 248 )
Change causes retroactive accounting before earliest period possible ( PTRA_WEB_INTERFACE 256 )
SAL receipt can be used only once; delete the receipt ( PTRA_WEB_INTERFACE 258 )
No stopover exists after domestic return &1 &2 ( PTRA_WEB_INTERFACE 261 )
No stopover exists prior to domestic departure &1 &2 ( PTRA_WEB_INTERFACE 262 )
The SAL receipt allowed only for trips that are more than 12 hours long ( PTRA_WEB_INTERFACE 263 )
Enter a valid number of receipts to be created ( PTRA_WEB_INTERFACE 264 )
Error during calculation of value-added tax amount for tax code &1 ( PTRA_WEB_INTERFACE 267 )
The tax amount entered cannot be allocated to wage types ( PTRA_WEB_INTERFACE 269 )
Summarization of expense account is changed on line item for each receipt ( PTRA_WEB_INTERFACE 280 )
Expense reports not possible due to activation of VAT refunds ( PTRA_WEB_INTERFACE 290 )
There is no need to waive the VAT refund for this receipt ( PTRA_WEB_INTERFACE 291 )
You cannot delete &; set private expenses back to zero ( PTRA_WEB_INTERFACE 299 )
Enter the names of all passengers ( PTRA_WEB_INTERFACE 315 )
Adjust the changed number of passengers in the additional information ( PTRA_WEB_INTERFACE 316 )
Trips are assigned to the personnel number; cannot delete ( PTRA_WEB_INTERFACE 317 )
Archived trips exist; cannot delete ( PTRA_WEB_INTERFACE 318 )
Credit card receipts exist; cannot delete ( PTRA_WEB_INTERFACE 319 )
Itemized receipts exist; these must be deleted first ( PTRA_WEB_INTERFACE 321 )
Preferred mealcode has become invalid ( PTRM_WEB_UI 126 )
You cannot unmerge this receipt; see long text ( PTRM_WEB_UI 157 )
Cluster PC cannot be destroyed ( PT_ARCH 000 )
Leave entitlement (infotype 0005) cannot be destroyed ( PT_ARCH 001 )
Leave quotas (infotype 2006) cannot be destroyed ( PT_ARCH 002 )
Attendance quotas (infotype 2007) cannot be destroyed ( PT_ARCH 003 )
Compensation (infotype 0083) cannot be destroyed ( PT_ARCH 004 )
Select a function that processes a personnel calculation rule ( PT_CUST_BURUL_STEPS 002 )
The absence type must be valid for continuous or intermittent FMLA ( PT_FMLA 001 )
Error in reading table &1 &2 ( PT_FMLA 002 )
No FMLA rules have been set up for personnel number & ( PT_FMLA 003 )
No rules for determining the weekly working time apply to pers.no. & ( PT_FMLA 004 )
The deduction period for FMLA rule "&1" ends on &2 ( PT_FMLA 005 )
FMLA rules and rules for determining weeky working time are inconsistent ( PT_FMLA 007 )
The system is unable to process this employee's data ( PT_FMLA 008 )
The system is unable to process this employee's data ( PT_FMLA 009 )
You are not permitted to change the eligibility indicator for rule & ( PT_FMLA 011 )
Check the FMLA request before saving ( PT_FMLA 014 )
FMLA request & cannot be deleted ( PT_FMLA 015 )
Selected FMLA request & does not exist ( PT_FMLA 017 )
Error in determining seniority ( PT_FMLA 018 )
Unable to determine time evaluation variant for simulation ( PT_FMLA 020 )
Errors occurred during simulation of time evaluation ( PT_FMLA 021 )
The system is unable to determine the personal work schedule ( PT_FMLA 022 )
Customizing error in table &1 when processing FMLA rule "&2" ( PT_FMLA 023 )
Error in determining period for time evaluation ( PT_FMLA 024 )
Error in determining the weekly converter ( PT_FMLA 026 )
The employee is not active for the entire period of the request ( PT_FMLA 027 )
Attendance/absence type & is not an absence ( PT_FMLA 034 )
Profile & does not exist ( PT_FMLA 039 )
The FMLA reason has to be visible ( PT_FMLA 040 )
Enter a rule number that is not "000" ( PT_FMLA 041 )
This is an FMLA-relevant absence linked to FMLA request no. &. ( PT_FMLA 042 )
This is an FMLA-relevant absence. See the message long text for details. ( PT_FMLA 043 )
The interval cannot be fixed and rolling simultaneously ( PT_FMLA_MESSAGES 001 )
The FMLA request cannot be rejected ( PT_FMLA_MESSAGES 002 )
There is no approved FMLA request with sufficient remainder ( PT_FMLA_MESSAGES 003 )
You cannot change the date of absences that are already assigned ( PT_FMLA_MESSAGES 004 )
The end date of the FMLA request had to be changed ( PT_FMLA_MESSAGES 005 )
Unable to create FMLA request ( PT_FMLA_MESSAGES 006 )
This absence is assigned to an FMLA request ( PT_FMLA_MESSAGES 007 )
The FMLA request cannot be approved ( PT_FMLA_MESSAGES 008 )
Archiving run was interrupted ( PT_REQ 004 )
Archiving session was interrupted ( PT_TEVEN 004 )
Select a function that processes a personnel calculation rule ( PT_TE_BUSUB_CUST 002 )
Screen area &1 not defined ( PT_TMW_FLD_SEL_CUST 001 )
No field catalog defined for screen area &1 ( PT_TMW_FLD_SEL_CUST 002 )
Field catalog &1 not defined ( PT_TMW_FLD_SEL_CUST 003 )
No screen defined for object ID &1 ( PT_TMW_FLD_SEL_CUST 004 )
Several object IDs exist for the same screen ID ( PT_TMW_FLD_SEL_CUST 005 )
Screen &1 does not exist ( PT_TMW_FLD_SEL_CUST 006 )
Screen &1 contains no table control ( PT_TMW_FLD_SEL_CUST 007 )
Field selection &1 not defined for screen area &2 ( PT_TMW_FLD_SEL_CUST 008 )
Sort field &1 not defined ( PT_TMW_FLD_SEL_CUST 009 )
Runtime error occurred at CREATE OBJECT &1 ( PT_TMW_FLD_SEL_CUST 010 )
Runtime error occurred at CALL METHOD GET_FIELD_TAB ( PT_TMW_FLD_SEL_CUST 011 )
Exception &1 triggered in function module &2 ( PT_TMW_FLD_SEL_CUST 012 )
Interface &2 does not exist ( PT_TMW_FLD_SEL_CUST 013 )
&2 is a class, not an interface ( PT_TMW_FLD_SEL_CUST 014 )
Maintain using view cluster &1 only ( PT_TMW_FLD_SEL_CUST 015 )
Definition missing for field catalog &1 ( PT_TMW_FLD_SEL_CUST 016 )
Several definitions exist for field catalog &1 ( PT_TMW_FLD_SEL_CUST 017 )
Profile for user &3 either not created or incomplete ( PT_TMW_FLD_SEL_CUST 018 )
Save Customizing changes ( PT_TMW_FLD_SEL_CUST 019 )
Delete value &1 from the application indicator field (APPID) ( PT_TMW_FLD_SEL_CUST 020 )
Entry missing in application indicator field ( PT_TMW_FLD_SEL_CUST 021 )
Program and status must be specified together ( PT_TMW_FLD_SEL_CUST 022 )
Delete value &1 from the application indicator field (APPID) ( PT_TMW_FLD_SEL_CUST 023 )
Entry missing in application indicator field ( PT_TMW_FLD_SEL_CUST 024 )
Choose a different ID; ID & already exists ( PT_TMW_HEADER_CUST 001 )
Name range exhausted; no further entries permitted ( PT_TMW_HEADER_CUST 003 )
Table &1 already being processed by user &2 in client &3 ( PT_TMW_HEADER_CUST 004 )
Customer-specific names (IDs) must start with Y, Z, or special character ( PT_TMW_HEADER_CUST 006 )
Invalid ID; GUI object with ID &1 missing ( PT_TMW_HEADER_CUST 008 )
Infotype &1 not permitted (time constraint incorrect) ( PT_TMW_HEADER_CUST 015 )
Enter the number and unit ( PT_TMW_PROFILE_CUST 000 )
Initial scenario already set for task selection &1 ( PT_TMW_PROFILE_CUST 001 )
Enter at least one method for employee selection ( PT_TMW_PROFILE_CUST 002 )
You do not have an employee group assigned to you ( PT_UI_IA 000 )
&1 is not a valid client ( PU 001 )
The entered target client & is invalid ( PU 002 )
Background job & is not scheduled in client & ( PU 003 )
Background job could not be scheduled (see system log) ( PU 004 )
Background job & has already been scheduled in client & ( PU 005 )
Error scheduling background job & in client & ( PU 007 )
Event for starting &1 triggered in client &2 ( PU 008 )
Table TRBAT contains lock entry: &1 ( PU 011 )
Header &1: Invalid target client &2 for individual requests ( PU 034 )
Header &1: Background job &2 is not scheduled in client &3 ( PU 035 )
Header &1: Invalid target client &2 ( PU 036 )
Event to start &3 in client &4 could not be triggered ( PU 039 )
No authorization for scheduling transport programs ( PU 040 )
Background job &1 in client &2 has not been scheduled ( PU 041 )
Background job &1 did not end correctly ( PU 042 )
Program &1 does not exist ( PU 101 )
&1 is not an executable program ( PU 102 )
Global memory was destroyed after execution of XPRA &1 ( PU 103 )
Global memory was destroyed after execution of method &1 ( PU 104 )
Global memory destroyed after transport methods executed ( PU 105 )
Internal mode is destroyed after execution of method &3 ( PU 106 )
Report &1 not executed since it is not active in this system ( PU 107 )
Change/transport request & does not exist ( PU 112 )
There are no XPRA reports to execute ( PU 113 )
Report & started: & ( PU 115 )
Report & ended: & ( PU 116 )
Start of................ & ( PU 118 )
End of.................. & ( PU 119 )
Subsequent processing of & & already carried out in previous step ( PU 121 )
Post-import method & started for & &, date and time: & ( PU 122 )
Post-import method & completed for & &, date and time: & ( PU 123 )
Function module & does not exist (subsequent processing for & &) ( PU 124 )
The object & & has not been imported successfully yet ( PU 125 )
Transport step &: Background job & ended correctly ( PU 130 )
No objects requiring post-import methods exist ( PU 131 )
Errors occurred executing report & ( PU 132 )
Errors occurred during post-handling & for & & ( PU 133 )
The errors affect the following components: ( PU 136 )
&1 (&2) ( PU 137 )
Postprocessing necessary when upgrade has been completed ( PU 139 )
Start on & at & ( PU 145 )
Cross reference generation triggered ( PU 148 )
Ended on & at & ( PU 149 )
No. of programs /Min/Avg/Max (sec): & & & & ( PU 150 )
No. of variants /Min/Avg/Max (sec): & & & & ( PU 151 )
No. of dynpros /Min/Avg/Max (sec): & & & & ( PU 152 )
& & & already generated ( PU 154 )
& & & not yet imported ( PU 155 )
Program & does not exist ( PU 156 )
Report & : Variant catalog was updated ( PU 157 )
Dynpro &1 &2 not generated since it is not activated ( PU 158 )
Program &1 will not be generated since it is not activated ( PU 159 )
Program &: Generation error in line & ( PU 160 )
Program &: Syntax error in line & ( PU 161 )
Program &, Include &: Generation error in line & ( PU 162 )
Program &, Include &: Syntax error in line & ( PU 163 )
&& ( PU 164 )
Dynpro &1 &2: Generation error ( PU 167 )
Error synchronizing DB buffers of application server &1 ( PU 171 )
Program &1, include &2: Syntax warning line &3 ( PU 178 )
Post-import methods called without specified client ( PU 181 )
Post-processing for &2 &3 was already performed successfully earlier ( PU 182 )
Object &2 &3 has not yet been imported successfully ( PU 183 )
Post-processing for &2 &3 in client &4 was already performed earlier ( PU 184 )
The object &2 &3 has not yet been imported successfully into client &4 ( PU 185 )
Post-processing taking place in client &2 ( PU 186 )
Termination of post-import methods after TRBATC communication error ( PU 187 )
Code page type for system could not be determined ( PU 188 )
Cannot transport ADO objects for Unicode systems ( PU 189 )
Post-import methods called without unique client ( PU 190 )
Recursive call of activation methods of Switch Framework ( PU 191 )
Post-import method &1 in client &2 already ran ( PU 192 )
Error in call when executing XPRA reports ( PU 193 )
--> Messages from log file & ( PU 203 )
Start: Adjusting the object directory for the objects of the request &1 ( PU 231 )
Error in pre-export methods for request &1 ( PU 238 )
Request &1 is modifiable after error during release ( PU 240 )
Function module &1 does not exist (export pre-processing for &2 &3) ( PU 241 )
&1 is not a transportable request ( PU 254 )
Error accessing the database (for namespace tables) ( PU 258 )
Log does not contain any entries ( PU 293 )
Specify a transport request ( PU 303 )
Specify a system name ( PU 304 )
Specify an action type ( PU 305 )
Specify a valid directory type: T(ransport), P(ut) ( PU 306 )
Specify a log name ( PU 307 )
Specify a valid log type: F(ile system) ( PU 308 )
Could not write database log completely ( PU 309 )
Required log section not found ( PU 311 )
Enter a valid log type ( PU 313 )
Selection log (internal number &1, for delivery request &2) ( PU 325 )
Versioning was not activated ( PU 340 )
Respond to the following errors only after completing the upgrade ( PU 370 )
Layer & already exists. Creating the new layer & (&,&). ( PU 371 )
Position the cursor on a transport request ( PU 414 )
Position the cursor on a transport or a repair ( PU 415 )
Position the cursor on a transport request ( PU 416 )
Position the cursor on a reference to a log ( PU 417 )
Position the cursor on a transport request ( PU 418 )
Object &1 &2 &3 cannot be processed in Support Package ( PU 451 )
Request &1 is assigned to Support Package request; linking not possible ( PU 452 )
System change option "&1" cannot be changed here ( PU 453 )
System change option: & ( PU 454 )
XCLA &1: Package &2 canceled due to too many data records ( PU 479 )
Request/task &1 not deleted; see long text ( PU 647 )
File identifier &1 does not exist ( PU 649 )
Unknown system &1 from domain &2 with client &3 ( PU 657 )
R3TRANS deployment skipped for following requests (see long text): ( PU 679 )
Internal error; assertion skipped (see long text) ( PU 682 )
Action &1 canceled due to timeout ( PU 716 )
No further actions required for this transport ( PU 719 )
Distribution to system &2 canceled with error &1 ( PU 720 )
Target system &1.&2 rejects calls from system &3.&4 ( PU 745 )
Service &1 is not available ( PU 752 )
Invalid file access mode "&" ( PU 801 )
Type "&" invalid for transport directory ( PU 802 )
Identifier "&" invalid for naming convention ( PU 803 )
Invalid system name "&" ( PU 804 )
Error when calling the operating system ( PU 805 )
Parameter passing is inconsistent ( PU 806 )
No authorization to read file & ( PU 807 )
No authorization to change file & ( PU 808 )
You are not authorized to delete file & ( PU 809 )
No system name for system log file ( PU 811 )
Type "&" invalid for logging file ( PU 812 )
Command file for & locked by another process ( PU 813 )
Cannot access file & ( PU 814 )
SAP names file for & locked by another process ( PU 815 )
Specify a name unique in Change and Transport System ( PU 817 )
Error when changing sapnames file if user & ( PU 818 )
No transport information for specified user/transport found ( PU 820 )
Global information cannot be read ( PU 823 )
Global information cannot be read ( PU 824 )
No deletable entries found ( PU 825 )
Log is too big (& bytes); messages displayed up to level 3 only ( PU 826 )
No output possible for attendee &1 &2; no activity data available ( PV 023 )
Attendee could not be locked; no editing possible ( PV 056 )
You do not have authorization to perform function & ( PV 089 )
& There is already a booking for the same business event type ( PV 125 )
Attendees are already booked ( PV 194 )
Resources are already reserved ( PV 195 )
Other relationships exist; no change allowed ( PV 196 )
Other infotypes exist; no change allowed ( PV 197 )
No relationships found with the object specified ( PV 249 )
Choose an Object Type ( PV 251 )
No objects found in selected time period ( PV 252 )
Object & & does not exist ( PV 267 )
Result is incomplete (because of missing authorization) ( PV 275 )
No appraisals have been created yet ( PV 284 )
No relationships found between & and & ( PV 298 )
No object exists in the period specified ( PV 299 )
Attendees to be rebooked currently cannot be locked ( PV 315 )
Specify a valid appraisal type ( PV 344 )
Generate your factory calendar ( PV 345 )
Objects related with business event & & could not be locked ( PV 372 )
It is not possible to firmly book or cancel a session ( PV 391 )
Data is already consistent ( PV 397 )
Select events that have been firmly booked and/or planned ( PV 400 )
Select an object ( PV 401 )
Different objects (resource and reservation) have been selected ( PV 402 )
Selection period was changed by the system ( PV 403 )
Resource is already locked ( PV 407 )
Resource is reserved ( PV 408 )
Error when creating lock relationship ( PV 409 )
Service not maintained ( PV 410 )
Resource & locked from & to &. ( PV 411 )
Resource & unlocked from & to & ( PV 412 )
Error when deleting lock relationship ( PV 413 )
There are reservations in the lock period ( PV 416 )
The resource is already locked in the lock period ( PV 417 )
Error editing client & ( PV 423 )
Error when determining the budget year: endda = &1, begda = &2 ( PV 424 )
Error when determining organizational unit & ( PV 425 )
Error when determining the organizational hierarchy. ( PV 426 )
Error & when creating budget objects ( PV 427 )
Database update error occurred ( PV 428 )
Maintain all business event locations for the annual planning ( PV 434 )
Cost center or controlling area not maintained ( PV 436 )
No material exists for the business event ( PV 437 )
Error in ALE distribution ( PV 440 )
Financial year<>budget year to be converted ( PV 448 )
Position the cursor correctly ( PV 452 )
Complete demand for &1 business events could only be covered by &2 ( PV 457 )
External person &1 does not exist ( PV 470 )
External person &1 already exists ( PV 471 )
External person &1 was created ( PV 472 )
External person &1 could not be created ( PV 473 )
External person &1 was deleted ( PV 474 )
External person &1 could not be deleted ( PV 475 )
Simplified display (key date &1) ( PV 476 )
A person with the name &1 already exists ( PV 477 )
The short name &2 is not unique ( PV 478 )
Enter a shorter last name or first name ( PV 479 )
Business event location &1 does not exist ( PV 480 )
Business event location &1 already exists ( PV 481 )
Business event location &1 was created ( PV 482 )
Business event location &1 could not be created ( PV 483 )
Business event location &1 was deleted ( PV 484 )
Business event location &1 could not be deleted ( PV 485 )
Enter the calendar ID and currency ( PV 486 )
Select one object only ( PV 487 )
Enter at least system and user ( PV 488 )
Object &3 (&2) is already related (time constraint) ( PV 489 )
Company &1 does not exist ( PV 490 )
Company &1 already exists ( PV 491 )
Company &1 was created ( PV 492 )
Company &1 could not be created ( PV 493 )
Company &1 was deleted ( PV 494 )
Company &1 could not be deleted ( PV 495 )
Enter a change request (correction number) ( PV 496 )
Enter a street, postal code, city and country ( PV 498 )
This part of Training & Event Management is currently in processing ( PV 499 )
Training program &1 does not exist ( PV 500 )
Training program &1 already exists ( PV 501 )
Training program &1 was created ( PV 502 )
Training program &1 could not be created ( PV 503 )
Training program &1 was deleted ( PV 504 )
Training program &1 could not be deleted ( PV 505 )
You have no authorization to create ( PV 506 )
Enter a valid capacity (minimum =< optimum =< maximum) ( PV 507 )
No changes were transferred ( PV 508 )
Changes were transferred ( PV 509 )
Business event group &1 does not exist ( PV 510 )
Business event group &1 already exists ( PV 511 )
Business event group &1 was created ( PV 512 )
Business event group &1 could not be created ( PV 513 )
Business event group &1 was deleted ( PV 514 )
Business event group &1 could not be deleted ( PV 515 )
System error: the Object infotype (1000) is missing from action &1 ( PV 516 )
System error: object type &1 cannot be edited ( PV 517 )
Maintain one of the highlighted relationships ( PV 518 )
You have no authorization for the function or the object ( PV 519 )
Business event type &1 does not exist ( PV 520 )
Business event type &1 already exists ( PV 521 )
Business event type &1 was created ( PV 522 )
Business event type &1 could not be created ( PV 523 )
Business event type &1 was deleted ( PV 524 )
Business event type &1 could not be deleted ( PV 525 )
Business event type &1 was activated ( PV 526 )
Business event type &1 could not be activated ( PV 527 )
Enter a number ( PV 528 )
You have no authorization to relate this object ( PV 529 )
Resource type &1 does not exist ( PV 530 )
Resource type &1 already exists ( PV 531 )
Resource type &1 was created ( PV 532 )
Resource type &1 could not be created ( PV 533 )
Resource type &1 was deleted ( PV 534 )
Resource type &1 could not be deleted ( PV 535 )
System error: update is not possible without the 'Object' infotype (1000) ( PV 537 )
Short name &1 is numerical (could be confused with ID) ( PV 538 )
Object &1 &2 does not exist from &3 to &4 ( PV 539 )
Resource &1 does not exist ( PV 540 )
Resource &1 already exists ( PV 541 )
Resource &1 was created ( PV 542 )
Resource &1 could not be created ( PV 543 )
Resource &1 was deleted ( PV 544 )
Resource &1 could not be deleted ( PV 545 )
Resource &1 was activated ( PV 546 )
Resource &1 could not be activated ( PV 547 )
You have no authorization to delete &2 ( PV 548 )
Enter at least the form of address, nationality and language ( PV 549 )
No integration has been activated with Materials Management ( PV 577 )
Original document cannot be displayed ( PV 579 )
Document status was not updated ( PV 601 )
No objects were found for structure display ( PV 610 )
System error: root object type or evaluation path could not be found ( PV 611 )
Requested function is not possible for this object ( PV 612 )
The hierarchy was only expanded to the business event type level ( PV 613 )
The relationship to the superior object cannot be created ( PV 614 )
Object &1 was not deleted ( PV 615 )
The relationships to superior objects could not be deleted ( PV 616 )
Errors in availability check for material ( PV 619 )
Structure could not be created ( PV 620 )
Hierarchical list could not be displayed ( PV 621 )
Existing values for function will be taken ( PV 623 )
Text key will be shortened to &1 characters ( PV 624 )
Enter a different value for the menu ( PV 626 )
Save before testing ( PV 627 )
Service is used multiple times ( PV 628 )
Table could not be locked ( PV 629 )
Service was not entered correctly ( PV 631 )
The service entered does not exist ( PV 632 )
Entry still requires a text ( PV 633 )
The menu cannot call itself ( PV 635 )
The function was not entered correctly ( PV 636 )
Existing text will be transferred ( PV 638 )
Function is used multiple times ( PV 639 )
Data has not been converted yet; no delete possible ( PV 644 )
There are no allowed relationships for the form of appraisal & available ( PV 645 )
No text variables or too many exist (standard letter) ( PV 646 )
You have no authorization to create a business event ( PV 650 )
You have no authorization to plan a business event ( PV 651 )
Error when saving data ( PV 652 )
Menu / function must be at least 5 characters long ( PV 654 )
Use different values in the second column ( PV 655 )
No form has been assigned to notification abbreviation & ( PV 665 )
Structure & could not be activated ( PV 676 )
Error writing structure & to transport request ( PV 678 )
Error writing program & to transport request ( PV 679 )
HTML Control display is not possible; continue with editor ( PV 692 )
Capacity overrun: event will be firmly booked with maximum capacity ( PV 699 )
Business event &1 is locked by another user ( PV 701 )
Control parameters affecting activity allocation are missing ( PV 704 )
Attendee & & is no longer determined for activity allocation ( PV 709 )
Settlement data for attendee & has already been transferred ( PV 710 )
The control parameters relevant for integration are missing ( PV 715 )
The control parameters relevant for billing have not been maintained ( PV 720 )
No editing possible; billing and allocation document exists ( PV 721 )
Only the entries 'E-O-D' or 'E-D-O' are allowed ( PV 725 )
No demand exists for the selection conditions entered ( PV 728 )
Document & could not be found ( PV 731 )
No change to business event possible since cost transfer document exists ( PV 736 )
No document cancellation possible ( PV 740 )
Credit memo amount is greater than the net amount (/attendance fee) ( PV 742 )
No credit memo possible ( PV 744 )
No integration activated for this action ( PV 745 )
Attendance fee will be used since no net amount exists ( PV 747 )
Enter a valid reference unit combination ( PV 749 )
One of the resources reserved by you is currently locked by another user ( PV 761 )
The availability of one of the selected resources has changed ( PV 762 )
Qualification assignment is not allowed for attendee type & ( PV 763 )
Currency &1 is only valid until &2 ( PV 768 )
Currency &1 is no longer valid ( PV 769 )
Business event cannot be changed; development plans exist ( PV 773 )
Billing and activity allocation only possible in same controlling area &1 ( PV 780 )
No booking possible; archived attendance records exist ( PV 798 )
No change to business event possible; archived attendance records exist ( PV 799 )
Please enter a delimitation date between &1 and &2 ( PV 800 )
Object &1 &2 cannot be delimited ( PV 802 )
You have no authorization to delimit object &2 ( PV 803 )
Object &1 &2 has a historical record flag ( PV 804 )
There is no entry for the resource type for Room Reservations ( PV 806 )
System error: relationship &1 with resource type is not allowed ( PV 807 )
The resource type for the room reservation &1 does not exist ( PV 808 )
You have no authorization to assign the room ( PV 809 )
The resource type for the room reservation &1 is historically recorded ( PV 810 )
The resource type for the room reservation is being edited ( PV 811 )
Objects of type &1 cannot be maintained in basic transactions ( PV 814 )
The object is not related to another object ( PV 815 )
Enter the information "&1" ( PV 816 )
Specify internal currency, capacity, costs, and schedule. ( PV 818 )
&4 &1 was deleted ( PV 831 )
&3 &1 could not be deleted ( PV 832 )
&4 &1 was activated ( PV 833 )
&4 &1 could not be activated ( PV 834 )
&3 &1 was created ( PV 835 )
&3 &1 could not be created ( PV 836 )
&3 &1 does not exist ( PV 837 )
&3 &1 already exists ( PV 838 )
Enter a valid attendance type ( PV 849 )
Enter a valid region ( PV 850 )
Enter a valid form of address ( PV 851 )
Enter a valid name affix ( PV 852 )
Enter a valid name prefix ( PV 853 )
Enter a valid system name ( PV 854 )
Enter a valid nationality ( PV 855 )
Enter a valid country ( PV 856 )
Enter a valid building ( PV 857 )
Enter a valid currency ( PV 858 )
Exchange rate of currency &1 not defined in reference currency &2 ( PV 862 )
Exchange rate of currency &1 not defined in reference currency &2 ( PV 866 )
Exchange rate of currency &1 not defined in reference currency &2 ( PV 869 )
Enter a valid factory calendar ( PV 874 )
Error when opening WinWord file ( PV 877 )
Error when converting into reference currency & ( PV 879 )
Error converting currency &1 into currency &2 on &3 ( PV 881 )
Error converting into currency & ( PV 882 )
Select at least one booking priority ( PV 894 )
Value & does not exist ( PV 899 )
Database table PVCMPH could not be accessed ( PVCMPH_PVCMP 001 )
Serialization: A more recent IDoc has already been processed ( PVJ 003 )
Rebate conditions already exist; overwriting is not permitted ( PVJ 026 )
Enter assortment or receiver ( PVJ 033 )
The system cannot find one or more partner agreements ( PVJ 042 )
This condition download profile already exists ( PVJ 101 )
Condition download profile entered does not exist ( PVJ 102 )
The fields could not be determined ( PVJ 103 )
The conditions list does not exist ( PVJ 104 )
The condition download profile entered is currently being processed. ( PVJ 105 )
Selection screen for download could not be determined ( PVJ 106 )
The purpose of this condition download profile is not specified ( PVJ 107 )
No pricing procedure selected ( PVJ 108 )
You have no authorization for the activity requested ( PVJ 111 )
ILN determination: No address segment E1ADRM1 with FR ident. available ( PVJ 201 )
ILN determination: No additional address segment E1ADRE1 with ident. 100 ( PVJ 202 )
ILN determination: ILN &1 is not available in the table PRICAT_001 ( PVJ 203 )
ILN determination: No supplier can be determined for ILN &1 ( PVJ 204 )
Purchasing group determination: no purchsaing group entered for ILN &1 ( PVJ 205 )
ILN determination: The ILN &1 is assigned to several suppliers ( PVJ 206 )
Error during data assignment ( PVJ 214 )
Catalog &1 was not posted. Error in application log &2 ( PVJ 314 )
The base unit of measure for EAN &1 (&2) is missing ( PVJ 315 )
Material &1 only contains the generated EAN/UPC &2 ( PVJ 317 )
Unit of measure &3 for material &1 only has generated EAN/UPC &2 ( PVJ 318 )
Component &3 of BOM &2 is not contained in module &1 ( PVJ 319 )
Price catalog &1 was created. See information in application log ( PVJ 320 )
Price catlaog &1 has changed. See information in application log &2 ( PVJ 324 )
Material &1 does not have an EAN/UPC ( PVJ 340 )
Unit of measure &2 of material &1 does not have an EAN/UPC ( PVJ 341 )
The material &1 has not been posted. Warnings in error log. ( PVJ 353 )
Material &1 could not be posted. Error in application log. ( PVJ 354 )
If you do not enter the purchasing group, you cannot maintain the data ( PVJ 355 )
With this material type, ext. material no. must not contain only numbers ( PVJ 367 )
Number & not defined for material type & ( PVJ 369 )
Internal number assignment is not possible for the material type & ( PVJ 373 )
The component is not a single article ( PVJ 383 )
Entered data record already exists and can only be changed ( PVJ 389 )
Only partner type 'LS' is allowed for IDoc PriceCatalog ( PVJ 407 )
Profile &1 does not exist - price determination not possible ( PVJ 409 )
Error during assignment of catalog field &1 &2 ( PVJ 412 )
Internet template customer &1 is not transferred ( PVJ 416 )
You are not authorized to delete price catalog &1 ( PVJ 424 )
Transfer ID not saved - engineering change management overwrites errors ( PVJ 433 )
Changed fields are overwritten by engineering change management ( PVJ 434 )
A partner role is not allowed for partner type 'LS' for the IDoc PriceCat ( PVJ 467 )
Delete the assignment of the catalog type to structures ( PVJ 480 )
Only use structure types '01' to '09' ( PVJ 481 )

Length: 605544 Date: 20191121 Time: 050739

Count: 2377     sap01-206 ( 1101 ms ) This documentation is copyright by SAP AG.

Our Service

Looking for Support? Questions?

The

Consolut

Callback-Service

Leave us your contact details and we will call you back. Panels marked with * are mandatory.