Messages

Complete Message Docu Documentation From PVS0C005 up to R7318

This documentation is copyright by SAP AG.
Count: 3734 Skipped: 34
Message Docu
Description
Change can cause problems when variants have class entries ( PVS0C 014 )
Caution! Serious error: profile was not recognized ( PVS0C 019 )
Changes were made with a history for the node type &1 ( PVS0C 155 )
Changes with history have been made to relationship type &1/&2 ( PVS0C 309 )
Entry &3 from table &1 already exists in table &2 ( PWPCMANAGER46B 002 )
&1 records from table &2 were successfully moved to table &3 ( PWPCMANAGER46B 003 )
Error while inserting records from table &1 into table &2 ( PWPCMANAGER46B 004 )
Entry &3 from table &1 or table &4 already exists in table &2 ( PWPCMANAGER46B 006 )
&1 records from tables &2 and &4 successfully moved to table &3 ( PWPCMANAGER46B 009 )
User &2 already exists for employee &1 ( PWWW 102 )
User &1 was related to employee &2 ( PWWW 104 )
Error occurred when creating relationship for user &1 to employee &2 ( PWWW 105 )
Error occurred when creating relationship for user &1 to role &2 ( PWWW 106 )
User &1 related to role &2 ( PWWW 107 )
No authorization profile exists for role &1 ( PWWW 108 )
Profile for role &1 is possibly out of date ( PWWW 109 )
Profile &1 could not be assigned to user &2 ( PWWW 110 )
Profile &1 was assigned to user &2 ( PWWW 111 )
Error when accessing exit module for password/user ID ( PWWW 112 )
Date of birth not found for employee &1 - user &2 gets password 'INIT' ( PWWW 113 )
User &1 was delimited for &2 ( PWWW 114 )
Personnel number &1 does not have 'active' status ( PWWW 115 )
Profile(s) for role &1 assigned to user &2 ( PWWW 119 )
Error when writing log ( PWWW 126 )
Please enter an initial password ( PWWW 127 )
User &1 is already related to an employee ( PWWW 128 )
No role was specified ( PWWW 129 )
Relationship is not valid for today's date, profile not assigned. ( PWWW 137 )
Log created ( PWWW 139 )
Error when assigning &1 to &2 in workplace system &3 ( PWWW 140 )
Activity is not possible in child system ( PWWW 141 )
No RFC destination found for logical system &1 ( PWWW 142 )
Role selection was deleted ( PWWW 143 )
System error when saving ( PWWW 500 )
Settings have been saved and will be active when you restart a service ( PWWW 501 )
Error when formatting photo '&1' ( PWWW 503 )
System error when archiving a photo ( PWWW 504 )
Photo has been archived and can now be accessed by your colleagues ( PWWW 505 )
Country grouping & is different for personnel area & personnel subarea & ( PX 001 )
Allocation of titles for genders is not clear ( PX 002 )
Table &: Text in language & is entered several times ( PX 003 )
No data definition for table & ( PX 004 )
Wrong entry: & ( PX 005 )
Error occurs when updating table PA0090 (see long text) ( PX 027 )
Entry with & key already exists in table & ( PX 031 )
Entry & from & has not be converted to &, since it is not in & ( PX 033 )
XPRA &1: no entry in table &2 for &3 ( PX 034 )
Several currencies for country grouping &1 (currency used: &2) ( PX 035 )
Invalid company code &1 ( PX 036 )
Different company code currencies for a personnel number ( PX 037 )
Several currencies for country &1 (selected currency &2) ( PX 038 )
No entry in table &1 for &2 &3 ( PX 039 )
The time unit &1 is assigned to several period parameters ( PX 040 )
The time unit &1 is not assigned to a period parameter ( PX 041 )
Time unit &1 is invalid ( PX 042 )
Table T510F unconverted in client &1, since there are entries in T510W ( PX 043 )
Field &1 cannot be replaced in T588J, client &2 ( PX 044 )
T582A client &1 infotype &2 differs from the entry in T777D ( PX 045 )
XPRA &1: No conversion required for source release &1 ( PX 046 )
Number of relevant records in table &1 : &2 ( PX 060 )
Number of records inserted into table &1 : &2 ( PX 061 )
Number of existing records for infotype &1 : &2 ( PX 062 )
Number of changed records for infotype &1 : &2 ( PX 063 )
Number of unchanged records for infotype &1 : &2 ( PX 064 )
Records already exist in table &1 ( PX 065 )
An error has occurred when importing table &1 to the database ( PX 066 )
AN error has occurred when changing the records for IT &1 on the database ( PX 068 )
A record for infotype &1 already contains entries ( PX 070 )
Include MPPAUTSW is incorrect or does not exist ( PX 072 )
Include MPPAUTSW was already converted ( PX 073 )
Subtype for communication infotype can not be determined in client &1 ( PX 075 )
Inconsistent personnel number &3 exists in client &1 for user &2 ( PX 076 )
Personnel number &2 is assigned several times in client &1 ( PX 077 )
Personnel number &2 is not available in client &1 ( PX 078 )
Personnel number &2 is already assigned in client &1 ( PX 079 )
User &2 is already assigned in client &1 ( PX 080 )
User &2 is not available in client &1 ( PX 081 )
Employee &1 has more than 359 records for infotype 0442 ( PX 086 )
The active plan version is set to 01 ( PX 090 )
The number range for the central person is specific to the plan version ( PX 091 )
There are no actions for employee &1 ( PX 092 )
There is no organizational assignment for employee &1 ( PX 093 )
Employees in client &1 are not converted, as ALE is active. ( PX 095 )
The Reference Personnel Number (0031) infotype was enhanced ( PX 097 )
Generation of schemes/cycles suppressed due to ZDO; handle later in PE04 ( PX 101 )
No entry in RGDIR for personnel number & sequence number & ( PYBAPI 011 )
Entries with the same key & exist in the PERIODS table ( PYBAPI 016 )
Entries with the same key & exist in the WAGETYPES table ( PYBAPI 017 )
Entries with the same key & exist in the ARREARS table ( PYBAPI 018 )
Entries with the same key & exist in the WAGETYPES table ( PYBAPI 019 )
Policy type &1 does not exist ( PYC_CONF 004 )
No validation rules have been maintained ( PYC_CONF 008 )
Check type &1 is not correct ( PYC_CONF 011 )
Process &1 can only be maintained using the frontend wizard ( PYC_CONF 055 )
Recurrence &1 has a duplicate key in another process ( PYC_CONF 067 )
Specified parent off-cycle process is not allowed ( PYC_CONF 068 )
Parent off-cycle process is not maintained ( PYC_CONF 069 )
Process name does not exist for process &1 in the current language ( PYC_CONF_CONS_CHECK 002 )
Process &1 has more than one process template assigned to it ( PYC_CONF_CONS_CHECK 003 )
Process &1 has no process template assigned ( PYC_CONF_CONS_CHECK 004 )
Process &1 has invalid country grouping &2 against &3 of process template ( PYC_CONF_CONS_CHECK 006 )
Process template category must be Monitoring if Event Handler is active ( PYC_CONF_CONS_CHECK 011 )
Process &1 has invalid administrator group &2 ( PYC_CONF_CONS_CHECK 012 )
Process &1 does not contain a Monitoring step ( PYC_CONF_CONS_CHECK 013 )
Process &1 has a monitoring step but does not contain KPI class ( PYC_CONF_CONS_CHECK 015 )
Process &1 has a monitoring step but does not contain any policy ( PYC_CONF_CONS_CHECK 016 )
Policy &2 in process &1 is not in the whitelist ( PYC_CONF_CONS_CHECK 017 )
Data source type &3 of policy &2 in process &1 is of wrong category &4 ( PYC_CONF_CONS_CHECK 019 )
KPI &3 of KPI class &2 in process &1 has incorrect input parameters ( PYC_CONF_CONS_CHECK 020 )
Check type &3 of policy &2 in process &1 has incorrect input parameters ( PYC_CONF_CONS_CHECK 021 )
Process &1 has passed consistency check but is not in process whitelist ( PYC_CONF_CONS_CHECK 022 )
KPI class &2 in process &1 is of wrong class category &3 ( PYC_CONF_CONS_CHECK 024 )
Policy class &2 in process &1 is of wrong class category &3 ( PYC_CONF_CONS_CHECK 025 )
Process authority prefix &1 does not match process type auth. prefix &2 ( PYC_CONF_CONS_CHECK 035 )
Step context parameter &1 has a different value in step &2 for process &3 ( PYC_CONF_CONS_CHECK 036 )
Process instance parameter value &1 not allowed by process context PERMO ( PYC_CONF_CONS_CHECK 037 )
Process &1 and policy type &2 have different country groupings ( PYC_CONF_CONS_CHECK 038 )
Process type text does not exist for process type &1 in current language ( PYC_CONF_CONS_CHECK 052 )
Process type &1 ctry. group &2 is different from its proc.template's &2 ( PYC_CONF_CONS_CHECK 054 )
Process template &2 for process type &1 is of invalid category &3 ( PYC_CONF_CONS_CHECK 055 )
Process template &2 for process type &1 should be of Monitoring category ( PYC_CONF_CONS_CHECK 056 )
Process type &1 has invalid administrator group &2 ( PYC_CONF_CONS_CHECK 057 )
Specify an authority prefix for process type &1 ( PYC_CONF_CONS_CHECK 058 )
Process type &1 has no policy type assigned ( PYC_CONF_CONS_CHECK 059 )
Process type &1 does not match its policy type &2 ( PYC_CONF_CONS_CHECK 060 )
Step instance for step template &1 does not exist for process &2 ( PYC_CONF_CONS_CHECK 101 )
Fixed and mandatory parameter &1 is empty in step &2 for process &3 ( PYC_CONF_CONS_CHECK 102 )
Process &1 has no check instance generated ( PYC_CONF_CONS_CHECK 105 )
Process &1 has no KPI instance created ( PYC_CONF_CONS_CHECK 106 )
Auth. prefix &2 of process &1 exceeds 4 digits ( PYC_CONF_CONS_CHECK 107 )
HTTP connection &1 is not defined ( PYC_CONT 233 )
This is not an Employee Central Payroll system ( PYC_CONT 234 )
Par. type &1 does not refer to Personnel Number ( PYC_CONT 235 )
We suggest that you not assign : ( PYC_FRW 030 )
Parameter value for &1 must not be edited ( PYC_FRW 031 )
Enter a prefix for the process authority object ( PYC_FRW 033 )
Process template &1 and process &2 have different instance parameters ( PYC_FRW 038 )
Instance parameter value &1 is invalid; enter a valid value ( PYC_FRW 041 )
Select a process template first ( PYC_FRW 042 )
Process &1 has no process templates assigned ( PYC_FRW 047 )
Prefix "&1" has been used for the process; use the same prefix ( PYC_FRW 051 )
Instance parameter values have different Period Parameters (PERMO) values ( PYC_FRW 052 )
Business function HCM_LOC_CI_68 is not activated ( PYC_FRW 058 )
Business function HCM_LOC_CI_72 is not activated ( PYC_FRW 081 )
Parameter type & does not exist ( PYC_FRW 102 )
No process template assigned to process & in the period ( PYC_FRW 104 )
Step template & does not exist ( PYC_FRW 106 )
Instance & is inconsistent ( PYC_FRW 108 )
Step & has not been assigned parameter type PYP_PROC ( PYC_FRW 109 )
Step & has not been assigned parameter type PYP_PROC_TEMPLATE ( PYC_FRW 111 )
Process has no process step groups ( PYC_FRW 112 )
Step group & has no steps ( PYC_FRW 113 )
Step & has not been assigned parameter type PYP_PROC_GRP_TEMPLATE ( PYC_FRW 115 )
Process step group instance & is inconsistent ( PYC_FRW 117 )
You have not defined process instance parameter values for the process ( PYC_FRW 120 )
Parameter type PYP_PROC_INST not found ( PYC_FRW 125 )
No process template assigned to process & in the period ( PYC_FRW 127 )
Input parameter type &1 missing in configuration ( PYC_FRW 133 )
Run time class for step template cannot be instantiated ( PYC_FRW 134 )
Process template &1 of instance diff. from process template of process &2 ( PYC_FRW 142 )
Step template has changed since last report run; regenerate steps first ( PYC_FRW 145 )
Process authority object ID &1 has already been used by process &2 ( PYC_FRW 147 )
Inconsistent process step &1 found and deleted ( PYC_FRW 149 )
There are inconsistent process step templates. ( PYC_FRW 200 )
Logic version is inconsistent between process &1 and process template &2 ( PYC_FRW 202 )
Fields in Selection group box must be empty in variant &1 program &2 ( PYC_FRW 253 )
Cannot generate check instances; max 100000 instances allowed ( PYC_FRW 300 )
No suitable policy step found in process instance &1 ( PYC_FRW 302 )
No suitable check instance found in process instance &1 ( PYC_FRW 303 )
No suitable step for re-execution in process instance &1 ( PYC_FRW 304 )
Step template &1 should support DS_ALLOWED and IS_SHADOWABLE ( PYC_FRW 306 )
Step template &1 should support additional activity ( PYC_FRW 307 )
Process &1 does not contain instance selection parameter value ( PYC_FRW 312 )
Check instance &1 has incorrect input par value &2 for par type &3 ( PYC_FRW 314 )
No check type assigned to the process ( PYC_FRW 350 )
Data source type &1 is not a check type ( PYC_FRW 351 )
Incorrect input parameters for check type &1 in policy &2 ( PYC_FRW 352 )
No auth. prefix for process &1; run report PYC_GENERATE_STEP first ( PYC_FRW 356 )
No policies assigned to process &1 ( PYC_FRW 359 )
Invalid class category for policy &1 ( PYC_FRW 360 )
Invalid category for check type &1 ( PYC_FRW 361 )
Duplicate data source type &1 assigned in process &2 ( PYC_FRW 362 )
Process instance selection parameter value not defined for process &1 ( PYC_FRW 363 )
Check instance &1 has no PYP_PROC or proc. instance par. as input type ( PYC_FRW 365 )
HAS-TO-BE-FIXED input type parameter &1 not found for check instance &2 ( PYC_FRW 366 )
Input parameter &1 not filled with value for check instance &2 ( PYC_FRW 367 )
Auth. prefix of check instance &1 differs from that of payroll process ( PYC_FRW 370 )
The value of input parameter PYP_PROC_INST for &1 must not be maintained ( PYC_FRW 371 )
Process &1 does not have instance selection parameter type assigned ( PYC_FRW 376 )
Data source type &1 has no PYP_PROC or proc. instance par. as input type ( PYC_FRW 377 )
No active process instance found in process &1 ( PYC_FRW 378 )
Pay date &1 pay ID &2 already used for another process instance ( PYC_FRW 402 )
Process assigned to different categories of proc. templates in the period ( PYC_FRW 404 )
Process assigned to different categories of proc. templates in the period ( PYC_FRW 408 )
Country grouping of process &1 is empty or * ( PYC_FRW 409 )
Off-cycle reason does not exist with country grouping &1 ( PYC_FRW 410 )
No parent proc. instance exists with pay date &1 and pay ID &2 ( PYC_FRW 413 )
No sequence number can be used for generated process instance ID ( PYC_FRW 414 )
Process is not assigned an off-cycle reason ( PYC_FRW 415 )
No parent instance found for process instance &1 ( PYC_FRW 416 )
No parent process has been defined for the process ( PYC_FRW 423 )
Parent process does not have off-cycle reason assigned ( PYC_FRW 424 )
Process template &1 is not a productive planned off-cycle (PO) template ( PYC_FRW 427 )
No parent instance found for off-cycle process instance &1 ( PYC_FRW 428 )
Payroll area, pay date and OC reason must be unique for proc. instance &1 ( PYC_FRW 430 )
No employees are selected for the process, please check ( PYC_FRW 437 )
Special value * cannot be used with other values in dimension &1. ( PYC_TM 001 )
Team criteria combination (&1&2&3) is already used by team &4. ( PYC_TM 002 )
Team Monitoring process is assigned to multiple process templates. ( PYC_TM 004 )
No team dimensions are assigned to the process. ( PYC_TM 005 )
Special value * cannot be used with other values in dimension &1. ( PYC_TM 013 )
Selected value might have been added before. Please check and try again. ( PYC_TM 019 )
You are not authorized to edit team configuration for process &1 ( PYC_TM 026 )
Team criteria combination (&1&2&3) is already used by team &4. ( PYC_TM 031 )
You are not authorized to manage team for process &1. ( PYC_TM 051 )
You are not authorized to forward alerts to a team. ( PYC_TM 052 )
You are not authorized to add notes. ( PYC_TM 053 )
You are not authorized to change teams. ( PYC_TM 054 )
No authorization for activity &1 when accessing variants of other users ( PYD_FND 006 )
ID contains invalid characters ( PYD_FND 025 )
DLM Group &1 does not use parameter type ( PYD_FND 026 )
Data source instances might be invalidated by change of country grouping ( PYD_FND 200 )
Please make corresponding changes in Details of Data Source Instance ( PYD_FND 201 )
Duplicate data source type &1 in different folders ( PYD_FND 205 )
Value of instance input parameter(s) is not set correctly ( PYD_FND 300 )
The policy cannot be edited because it falls in defined policy namespace ( PYD_FND 305 )
Process cannot be edited because it falls in defined process namespace ( PYD_FND 306 )
Enter DLM groups of the same category ( PYD_FND 401 )
Bank sub-account in T042Y not maintained & & & & ( PZ 004 )
Entry missing for planning level &1 for View V_T036R ( PZ 005 )
Payment methods identical - read the long text ( PZ 020 )
Log created for all accounts ( PZ 022 )
Clearing account for & & not maintained in V_T018V ( PZ 023 )
> Reference to accounting document is ignored ( PZ 028 )
No valid method of payment was transferred ( PZ 035 )
> Document line item & & is already cleared ( PZ 036 )
> There are inconsistencies between payment request and document ( PZ 038 )
Upper limit &1 of company code interval &2 has been corrected ( PZ 052 )
No clearing account for company code &1 found ( PZ 088 )
Reversal only permitted for bank account carry-forwards ( PZ 089 )
Payment request &1 has been cleared: Reversal not possible ( PZ 096 )
> Payment method is not defined for ALE distribution ( PZ 107 )
No receiver system defined for message type & and comp.code & ( PZ 108 )
Data for payment request selection is not sufficient ( PZ 110 )
Number range for payment requests is full ( PZ 120 )
The payment request &1 is already canceled in the buffer ( PZ 129 )
Document &1 / &2 in year &3 is not reversed ( PZ 130 )
Not all payments could be carried out (See long text) ( PZ 138 )
Payment request &1 has status &2, therefore release is not possible ( PZ 146 )
Entries not used for generic search ( PZ 150 )
Payment requests contain too many different payment methods ( PZ 151 )
Payment run &1/&2 not completed during waiting period ( PZ 152 )
Read note 301600 before continuing. ( PZ 193 )
Customer & & : Payee & missing, processing not possible ( PZ 202 )
No further processing of this item due to dynamic selections ( PZ 371 )
> Value date calculation: No valid table entry ( PZ 413 )
> Debit value date on & was calculated ( PZ 415 )
> You have not defined a payment method for item & and partner & ( PZ 418 )
> House bank & / & / & is not defined in table T042A ( PZ 419 )
> Pmnt method determin: G/L acct &: no pmnt method defined ( PZ 424 )
Pmnt method determination for item &: payment methods do not match ( PZ 425 )
Following payment orders balance out to zero and are cleared ( PZ 430 )
Tax adjustment not permitted (company codes: &, &, tax procedure: &, &) ( PZ 432 )
> Value date from request has been changed to posting date ( PZ 437 )
Payment not to be made until &1, next payment run on &2 ( PZ 438 )
G/L account payment: No G/L account for & /& specified for bank ( PZ 445 )
You cannot enter a required value ( PZ 447 )
A cross-company code transaction not known ( PZ 448 )
Bill of exchange, bill/ex. pymt req., and check/bill/ex. not allowed ( PZ 587 )
Creation of payment orders is not supported ( PZ 588 )
No settings made in payment program for company code &1 ( PZ 589 )
Parked payment requests must not be released for payment ( PZ 590 )
You are not authorized to display all payment requests ( PZ 600 )
You are not authorized to display all data ( PZ 601 )
No selections defined for house banks or payment methods ( PZ 620 )
Value date invalid ( PZ 634 )
Payment currency missing & ( PZ 678 )
> Inconsistency SWIFT/IBAN Bank/Payt. Request & & ( PZ 683 )
Payment to G/L account &: partner bank data is incomplete ( PZ 692 )
> Partner bank not valid, payment is not possible ( PZ 696 )
> Additional documents from cross-country bank-to-bank transfer: Trans. & ( PZ 750 )
Error during posting of cross-country bank-to-bank transfer ( PZ 751 )
Payment run &1/&2 must not be scheduled (authorization check) ( PZ 830 )
An entry &1 variant &2 already exists ( PZ 833 )
Report variants for & have been inserted automatically ... ( PZ 834 )
Database tables T042I and T042Y are not consistent ( PZ 850 )
No suitable data could be selected in T042I and T042Y ( PZ 851 )
> Currcy &1, pmnt method &2, house bank &3/&4: Bank subaccount missing ( PZ 854 )
Error in clearing account initialization for house banks ( PZ 855 )
> Currcy &1, pmnt method &2, house bank &3/&4: Bank subaccount missing ( PZ 857 )
You must specify a valid payment block reason ( PZ 858 )
By Customizing message PZ 850 consistency is not necessary ( PZ 859 )
Copy tax number 1 from master record ( PZ 860 )
Hide Info button for tax number 1 ( PZ 861 )
Bank chains are not active ( PZ 876 )
Incorrect bank in bank chain. Bank chain is ignored. ( PZ 882 )
Batch class & & is already being processed ( Q0 108 )
Plan & is already being processed ( Q0 109 )
You must first define the text ID & ( Q0 110 )
A long text already exists ( Q0 115 )
Only field names of type "VMENGE.." are allowed ( Q0 118 )
Set the indicator for the selected set ( Q0 120 )
No follow-up action defined in Customizing ( Q0 122 )
Follow-up action &1 not permitted for tasks ( Q0 124 )
Follow-up action &1 not permitted for usage decision ( Q0 125 )
Batch & & & is already being processed ( Q0 126 )
Text assignment history is displayed ( Q0 128 )
Number range interval &1 for number range object &2 not found ( Q0 130 )
Number range &1 of number range object &2 is not internal ( Q0 131 )
Number range object &1 could not be found ( Q0 132 )
The number assignment (object &1) is in the critical range ( Q0 133 )
The last free number for object &1 has been assigned ( Q0 134 )
More numbers requested than available (object &1) ( Q0 135 )
System error during number assignm. (obj. &1, no. range &2) ( Q0 136 )
Internal error occurred during authorization check ( Q0 137 )
There is an invalid authorization in user master data ( Q0 138 )
No authorization profiles are stored in user master data ( Q0 139 )
You are not authorized for status change &3 -> &4 at work center &1 &2 ( Q0 140 )
You are not authorized to perform this activity ( Q0 141 )
You have no authorization for catalog type &1 ( Q0 142 )
You have no authorization for catalog type &1 code group &2 ( Q0 143 )
You have no authorization for selected set &1 &2 ( Q0 144 )
You do not have authorization for selected set &1 &2 &3 ( Q0 145 )
No authorization for selecting codes from code group &1 &2 ( Q0 146 )
No authorization for selecting codes from catalog type &1 ( Q0 147 )
You do not have authorization for status &3 ( Q0 148 )
You have no authorization for the status &4 ( Q0 149 )
You have no authorization for master record maintenance with status & ( Q0 150 )
You have no authorization for notification type &1 ( Q0 151 )
You have no authorization for notification type &1 and plant &2 ( Q0 152 )
You have no authorization for SPC criterion &1 in plant &2 ( Q0 153 )
You have no authorization for certificate type &1 ( Q0 154 )
You are not authorized to carry out transaction &1 ( Q0 155 )
You have no authorization to enter data for work center &1 &2 ( Q0 156 )
You are not authorized to perform this activity ( Q0 157 )
No Quality Management view has been created for material &1 ( Q0 161 )
Detail information is in the application log ( Q0 162 )
You do not have authorization for this task ( Q0 163 )
You can find detailed processing information in the application log ( Q0 170 )
You can find detailed processing information in the application log ( Q0 171 )
You can find detailed processing information in the application log ( Q0 172 )
You can find detailed processing information in the application log ( Q0 173 )
You can find detailed processing information in the application log ( Q0 174 )
You are not authorized to create or change this code group ( Q0 180 )
You are not authorized to display this code group ( Q0 181 )
You do not have authorization for this code group ( Q0 182 )
You are not authorized to create this inspection method ( Q0 190 )
You are not authorized to change this inspection method ( Q0 191 )
You are not authorized to display this inspection method ( Q0 192 )
You are not authorized to delete this inspection method ( Q0 193 )
You are not authorized to create a validity period ( Q0 194 )
You are not authorized to edit this authorization group ( Q0 195 )
You are not authorized to use this inspection method ( Q0 196 )
Dependent control indicators will be canceled ( Q0 202 )
Calculated characteristic will be reset ( Q0 205 )
You can only record classed values using both specification limits ( Q0 208 )
Set the indicator "Characteristic attribute" ( Q0 209 )
Check whether recording measured values is required ( Q0 210 )
Set the indicator "Measured values" ( Q0 211 )
You cannot valuate according to number of defects and selected sets ( Q0 212 )
The indicator for valuating according to number of defects will be reset ( Q0 213 )
The required characteristics must be documented in results recording ( Q0 214 )
Inspection scope "fixed" should be set for SPC charac. ( Q0 215 )
No print variant is set for the inspection type ( Q0 216 )
Batch classification for this char. is not possible in standard process ( Q0 217 )
Internal error in search help &1: Parameter &2 not recognized ( Q0 250 )
You are not authorized to create this quality info record ( Q0 260 )
You are not authorized to change this quality info record ( Q0 261 )
You are not authorized to display this quality info record ( Q0 262 )
You are not authorized to create a characteristic group ( Q0 270 )
You are not authorized to change a characteristic group ( Q0 271 )
You are not authorized to display a characteristic group ( Q0 272 )
Only individual signatures are permitted ( Q0 310 )
Strategy &1 is a multilevel strategy, signature is not permitted ( Q0 311 )
Dependent data for the digital signature was deleted ( Q0 312 )
Text element &1 for digital signature in form &2 does not exist ( Q0 314 )
Save notification first so that a notification number can be assigned ( Q0 320 )
Digital signature is still open, operation '&1' is not set ( Q0 322 )
Continue digital signature process for operation '&1' ( Q0 325 )
Signature process completed successfully; Continue operation '&1' ( Q0 327 )
Execute activity '&1' ( Q0 328 )
Table entry TQ80_DS for notifictn type &1 and status &2 is inconsistent ( Q0 340 )
Only individual signatures are permitted ( Q0 346 )
You are not authorized to create the master inspection characteristic ( Q0 420 )
You are not authorized to change the master inspection characteristic ( Q0 421 )
You are not authorized to display the master inspection characteristic ( Q0 422 )
You are not authorized to delete the master inspection characteristic ( Q0 423 )
You are not authorized to assign the master inspection characteristic ( Q0 424 )
You are not authorized to use a master inspection characteristic ( Q0 425 )
You are not authorized to assign an unplanned master insp. characteristic ( Q0 426 )
You are not authorized to create or change the selected set ( Q0 430 )
You are not authorized to display the selected set ( Q0 431 )
You are not authorized to create a quality level ( Q0 440 )
You are not authorized to change a quality level ( Q0 441 )
You are not authorized to display a quality level ( Q0 442 )
You are not authorized to create the sampling procedure ( Q0 443 )
You are not authorized to change the sampling procedure ( Q0 444 )
You are not authorized to display the sampling procedure ( Q0 445 )
You are not authorized to create the sampling scheme ( Q0 446 )
You are not authorized to change the sampling scheme ( Q0 447 )
You are not authorized to display the sampling scheme ( Q0 448 )
You are not authorized to create the dynamic modification rule ( Q0 450 )
You are not authorized to change the dynamic modification rule ( Q0 451 )
You are not authorized to display the dynamic modification rule ( Q0 452 )
DB parameter &1 successfully changed - change is not permanent ( Q2 029 )
Connection name SYSTEMCON not maintained for user SYSTEM in DB &1 ( Q2 030 )
Cannot create condition of type &1 again ( Q2 222 )
Cannot delete condition &1 (object-independent condition) ( Q2 227 )
$$$$$$$$ ( Q2 230 )
$ $ $ $ ( Q2 231 )
&1&2&3&4 ( Q2 232 )
&1 &2 &3 &4 ( Q2 233 )
Place cursor on valid line ( Q2 300 )
No job log found matching criteria ( Q2 301 )
Database system not supported ( Q2 302 )
Place cursor on valid column ( Q2 303 )
Could not read detail log &.& ( Q2 304 )
No application server found on database host - rsh/gateway will be used ( Q2 305 )
Place cursor on valid position ( Q2 306 )
COMMIT failed in &, object &, function &, return code & ( Q2 307 )
Could not lock planning table SDBAP - Only display possible ( Q2 308 )
You do not have authorization & - Only display possible ( Q2 309 )
Choose an action ( Q2 310 )
Internal error: BPLAN record not found ( Q2 311 )
No action log found for this action ( Q2 312 )
Internal error: no action log found ( Q2 313 )
This selection has no function ( Q2 314 )
No action logs found for this day ( Q2 315 )
Nothing was changed ( Q2 316 )
This function cannot be used for past days ( Q2 317 )
This is a repeat job ( Q2 318 )
Channot change selected action ( Q2 319 )
Cannot delete selected action ( Q2 320 )
Action changed ( Q2 321 )
Action deleted ( Q2 322 )
The selected action does not use any tapes ( Q2 323 )
No jobs found to delete ( Q2 324 )
Immediate start canceled ( Q2 325 )
Action started ( Q2 326 )
Processing canceled ( Q2 327 )
Automatic redo log backup switched on ( Q2 328 )
Automatic redo log backup switched off ( Q2 329 )
Internal error: incorrect status & ( Q2 330 )
Internal error: problem deleting job ( Q2 331 )
Internal error: problem scheduling a job ( Q2 332 )
Internal error: problem deleting action ( Q2 333 )
Internal error: problem scheduling a job ( Q2 334 )
Internal error: problem changing an action ( Q2 335 )
Action cannot be scheduled to start in the past ( Q2 336 )
Start date conflicts with a scheduled action ( Q2 337 )
Parameter type & unknown ( Q2 338 )
Internal error: action unknown ( Q2 339 )
Scheduling of an action canceled ( Q2 340 )
Action scheduled ( Q2 341 )
Change of an action canceled ( Q2 342 )
No parameters exist for action ( Q2 343 )
Scheduling of an action pattern canceled ( Q2 344 )
Action pattern not scheduled due to conflicts ( Q2 345 )
Action pattern scheduled ( Q2 346 )
Background job not found ( Q2 347 )
Error accessing a background job ( Q2 348 )
More than one background job found ( Q2 349 )
The number of weeks displayed must be greater than 0 ( Q2 350 )
The index for the current week must be between 1 and & ( Q2 351 )
The number of actions displayed must be greater than 0 ( Q2 352 )
No tape names specified - these will be taken from profile ( Q2 353 )
No tablespaces selected ( Q2 354 )
Internal error: option & unknown ( Q2 355 )
Internal error: no option found ( Q2 356 )
Internal error: resource not found ( Q2 357 )
No dbspaces selected ( Q2 358 )
No tables selected ( Q2 359 )
Choose a system ( Q2 360 )
Internal Error: SPLAN data record not found ( Q2 361 )
Delete "Unknown" actions and replace with "UpdateStats" ( Q2 362 )
Database System & is not supported ( Q2 363 )
No (new) systems found in respository ( Q2 381 )
No volume sets selected ( Q2 405 )
No logs exist for function ID &1 ( Q2 500 )
There are no logs that are not categorized ( Q2 502 )
No object entries exist ( Q2 700 )
No phase information exists for selected object ( Q2 701 )
Choose a node in the tree. ( Q2 703 )
No platform-specific log viewer exists for &1 (&2, &3) ( Q2 708 )
Function not supported on non-SAP databases of type & ( Q2 709 )
Problems with background processing (&) ( Q2 711 )
Invalid system ID ( Q2 716 )
Deletion of operations on remote systems is not supported ( Q2 723 )
Log cannot be displayed ( Q2 735 )
You can only process new entries collectively ( Q3 011 )
Customizing prevents changing or creation of links to codes ( Q3 051 )
Internal error: Long text indicator is not compatible with long text ( Q3 091 )
A long text already exists with the new long text key ( Q3 092 )
This structure is not supposed to have a long text key ( Q3 093 )
Internal error: This object is not defined ( Q3 094 )
No long text exists with this key ( Q3 096 )
The system does not allow for the long text ID used ( Q3 097 )
An error occurred during printing ( Q3 098 )
Internal error occurred during processing ( Q3 099 )
The class does not exist ( Q3 100 )
The class is invalid ( Q3 101 )
You can only access the initial screen using a change number ( Q3 102 )
The change number is not allowed for the classification ( Q3 103 )
You do not have authorization for the class type ( Q3 104 )
Classification data was not deleted ( Q3 105 )
Date in record is the same as the date for change number: Not allowed ( Q3 106 )
Errors occurred during update of long texts ( Q3 108 )
You are not in "display" or "change" mode ( Q3 111 )
The system does not allow for multiple classification of the object ( Q3 114 )
No standard class type is defined for code groups ( Q3 115 )
The object is linked to another client ( Q3 121 )
Object is locked by another user ( Q3 122 )
Internal error: View cluster does not exist ( Q3 123 )
Internal error: View cluster definition is inconsistent ( Q3 124 )
Internal error: Generated view-maintenance modules are missing ( Q3 125 )
You are not authorized to create or change data ( Q3 126 )
You do not have display authorization ( Q3 127 )
Internal error: Object could not be found in DDIC ( Q3 128 )
Internal error: Object is not in table TVDIR ( Q3 129 )
You do not have authorization for cross-client objects ( Q3 130 )
Internal error: MAINTENANCE_ACTION contains invalid value ( Q3 131 )
Internal error: Error when saving corrections ( Q3 132 )
Internal error: System error occurred during locking procedure ( Q3 133 )
Internal error: Selection table contains unknown fields ( Q3 134 )
Error: Correction number is missing ( Q3 135 )
Internal error during authorization check ( Q3 137 )
There is an invalid authorization in user master data ( Q3 138 )
Internal error: The lock could not be removed ( Q3 141 )
You do not have authorization for &1 code group(s) in the catalog &2 ( Q3 143 )
Code &1 &2 is part of a selected set; deactivation not possible ( Q3 145 )
Internal error: Required entries for code group & have not been made ( Q3 151 )
Internal error: No entries in required fields for selected set & ( Q3 152 )
Data locked by user & (display only) ( Q3 161 )
No task list from task list type "S" found for material ( Q3 185 )
The update was canceled (mode &, table &, RC &) ( Q3 204 )
Error occurred during update ( Q3 205 )
Code & is being used and cannot be deleted ( Q3 221 )
Group code is assigned to a selected set. You cannot delete it ( Q3 253 )
No entry exists for catalog & in the Customizing table ( Q3 299 )
Use the transaction & to avoid data inconsistencies ( Q3 338 )
You need to maintain catalog &1 (&2) in Customizing ( Q3 340 )
Code group &2 is currently being processed by &1 ( Q3 407 )
There is no text for the catalog entry &1 in language &2 ( Q3 410 )
No inspection results were selected (&). ( Q4 001 )
Evaluation method & does not exist. ( Q4 102 )
There are no RFC destinations maintained for evaluation method &. ( Q4 103 )
Evaluation method & is not active. ( Q4 105 )
RFC destination & is not compatible with evaluation method &. ( Q4 106 )
No active evaluation method was selected. ( Q4 107 )
No evaluation methods are maintained for & language. ( Q4 108 )
The data entered is not sufficient for this evaluation ( Q4 112 )
Operation & for inspection & is not unique ( Q5 019 )
No assignments available ( Q5 020 )
Application '&1' cannot call any work packages from '&2' ( Q5 022 )
You (&1) cannot call work packages from inspector (&2) ( Q5 023 )
No entries are available for INSPLOT '&1' and INSPOPER_INT '&2' ( Q5 024 )
Operation '&1' is not allowed for inspection lot '&2' ( Q5 025 )
Defects occured during confirmation ( Q5 026 )
HANDHELD_WORKLIST table is empty ( Q5 032 )
Results confirmation is not allowed in status & ( Q5 035 )
Handheld application &1 may not change results of inspector &2 ( Q5 037 )
Conditional chars for controlling char. &1 cannot be considered ( Q5 040 )
Enter an existing info structure ( Q6 001 )
The info structure & is already active ( Q6 002 )
Delete the structure table(s) first ( Q6 003 )
The info structure & is not active ( Q6 004 )
The info structure & already contains data ( Q6 006 )
Deactivate info structure &1 first ( Q6 007 )
Deactivate the info structure & first ( Q6 008 )
Choose a database table or structure ( Q6 009 )
Enter another field catalog (&V1& is inconsistent) ( Q6 011 )
Enter an info structure first ( Q6 012 )
Activate the info structure & first ( Q6 013 )
You are not authorized to change infostructures for &1 ( Q6 014 )
You are not authorized to display table & ( Q6 015 )
Info structure & already exists ( Q6 016 )
Enter an existing field catalog ( Q6 017 )
You are not authorized to display infostructures for &1 ( Q6 019 )
Comply with the namespaces (see long text) ( Q6 020 )
The info structure & is in the customer namespace ( Q6 022 )
The info structure & is in the SAP namespace ( Q6 023 )
Enter an existing archving object ( Q6 024 )
Enter archiving object and field catalog appropriately ( Q6 025 )
Enter a field catalog ( Q6 026 )
Enter the info structure name ( Q6 027 )
Info structure & is active and can only be displayed ( Q6 029 )
Call the info structure maintenance with the correct transaction ( Q6 030 )
Info-structure & does not exist ( Q6 031 )
Info structure &1 no longer suitable for field catalog &2 ( Q6 032 )
The field &1-&2 does not exist ( Q6 034 )
Problems with transport: info structure &1 will not be created ( Q6 037 )
Problems with transport: info structure &1 will not be deleted ( Q6 038 )
Field catalog &1 cannot be deleted because it is still being used ( Q6 039 )
Select a field from the field catalog &1 ( Q6 040 )
Enter a valid field ( Q6 041 )
You can only remove valid fields from the info structure ( Q6 042 )
Select the fields to be removed ( Q6 043 )
Select the fields to be incorporated ( Q6 044 )
Transport problems: the info structure &1 cannot be saved ( Q6 045 )
Place the cursor on a field name ( Q6 046 )
Info structure &1 cannot be transported ( Q6 047 )
Enter a valid name for the infostructure ( Q6 048 )
Enter an existing table or structure ( Q6 049 )
Table &1 does not belong to archiving object &2 ( Q6 050 )
Enter a field from table &1 ( Q6 051 )
The client cannot be included in a field catalog ( Q6 052 )
It seldom makes sense to use the indicator "mandatory key field" ( Q6 053 )
&1 could be incompatible with &2 ( Q6 054 )
&1 could be incompatible with &2 ( Q6 055 )
Enter a field name ( Q6 056 )
Enter a field name ( Q6 057 )
Enter the name of the reference field ( Q6 058 )
Place all key fields at the beginning of the field catalog ( Q6 059 )
Field catalog &1 does not have any key fields ( Q6 060 )
Source field &1-&2 is the reference field ( Q6 061 )
Delete the structure table(s) for information structure &1 first ( Q6 073 )
Fixed tables for infostructure &1 are inconsistent ( Q6 078 )
A log could not be created for the activation of table & ( Q6 101 )
A problem occurred when activating table & ( Q6 102 )
Archiving object & structure table name determination error ( Q6 104 )
Structure table & could not be created in ABAP Dictionary ( Q6 105 )
The object directory entry for the structure table could not be deleted ( Q6 108 )
There is no database table for the info structure &1 ( Q6 109 )
The field &1-&2 does not exist ( Q6 113 )
Generation of structure tables is currently locked ( Q6 115 )
An index &1 for table &2 already exists with the same name ( Q6 151 )
The system could not create the index &1 for table &2 ( Q6 152 )
Error when activating the index &1 for table &2 ( Q6 153 )
Information structure &1: the index ID '&2' is not permitted ( Q6 154 )
A field name (position &3) is missing from the index &2 ( Q6 155 )
Information structure &1: error in the field selection for index &2 ( Q6 156 )
Field &3 does not belong to information structure &1 ( Q6 157 )
No repository information (nametab) was found for the table & ( Q6 158 )
Fieldname &1 does not exist in information structure &2 ( Q6 161 )
Field name &1 already exists for index ID &2 ( Q6 163 )
The index ID contains a non-alphanumeric character ( Q6 164 )
Analysis program could not be deleted ( Q6 218 )
The reporting program for info structure & is currently being edited ( Q6 219 )
Table & is not active ( Q6 221 )
Table field & is not in table & ( Q6 222 )
Data element & of table field &-& is not active or does not exist ( Q6 223 )
Info structure & analysis program could not be deleted ( Q6 225 )
Error in info structure & analysis program in line & ( Q6 227 )
No reporting program exists for info structure &1 ( Q6 228 )
No info structure found for selection ( Q6 229 )
No analyzable info structures for archiving object & ( Q6 230 )
No active info structures exist for archiving object &1 ( Q6 231 )
Info struct. &2 does not exist, is not suitable for object or is inactive ( Q6 233 )
Info structure &1 is inconsistent ( Q6 234 )
Info structure & no longer exists ( Q6 235 )
Info structure & no longer active ( Q6 236 )
Enter an active info structure ( Q6 238 )
Info structure &1 does not exist or is inactive ( Q6 239 )
No archiving object with active info structure exists ( Q6 240 )
No archiving object with info structures exists ( Q6 241 )
No archiving objects exist for which field catalogs exist ( Q6 242 )
No authorization to maintain database connection for SAP AS ( Q6 255 )
Default connection already exists: &1 ( Q6 256 )
Database connection &1 saved as default connection ( Q6 257 )
Database connection &1 not supported by SAP AS ( Q6 258 )
Delete the structure table(s) for information structure &1 first ( Q6 264 )
Database &1 with user &2 is already being used for system &3 ( Q6 267 )
Database connection &1: incorrect format for SYBASE_IQ_LOCKWAIT ( Q6 271 )
Key length too long: infostructure created on standard DB ( Q6 273 )
Key length of table to be created is greater than 255 bytes ( Q6 274 )
No object exists for info structure & ( Q6 311 )
Operation not possible for selected archive files and info structures ( Q6 312 )
Mark the info structures which you want to edit ( Q6 313 )
Inactive info structures cannot be edited ( Q6 314 )
Info structure status management inconsistency ( Q6 315 )
New fill for archive for which fill was not completed ( Q6 316 )
Mark the archive which you want to edit ( Q6 317 )
Info structure &1 for archive file &2 already constructed ( Q6 318 )
Info structure &1 for archive file &2 is not completely built ( Q6 319 )
The info structure fill program cannot be scheduled periodically ( Q6 320 )
Invalid job schedule parameter: Error & ( Q6 322 )
Job cannot currently be scheduled ( Q6 323 )
There are no analyzable archives ( Q6 325 )
A new job for editing archive info structures has been scheduled ( Q6 326 )
Archive & structure construction canceled ( Q6 327 )
Info structure constructed for archive & ( Q6 328 )
Internal error: archive key inconsistent: & <-> & ( Q6 329 )
Records not inserted in info structure & (see long text) ( Q6 330 )
You have no display authorization for archiving object & ( Q6 331 )
no authorization for transaction SARI ( Q6 332 )
Infostructure(s) was (were) removed ( Q6 334 )
Infostructure(s) was (were) built ( Q6 335 )
No analyzable archive for &1 found for this selection ( Q6 338 )
Records not inserted in infostructure & (forbidden characters) ( Q6 340 )
Place the cursor on the info record ( Q6 401 )
Display Data Object: Generation Error ( Q6 402 )
Field catalog &1 does not exist ( Q6 501 )
Incorrect type for parameter I_SELECTIONS, function module AS_API_READ ( Q6 502 )
Field &1 is not in field catalog &2 ( Q6 503 )
There is no active info structure for field catalog &1 ( Q6 504 )
No suitable infostructure found ( Q6 505 )
Enter an existing table ( Q6 506 )
There is no suitable active info structure ( Q6 507 )
Enter a suitable archiving object ( Q6 508 )
Enter a suitable infostructure ( Q6 509 )
Enter a suitable infostructure for object &1 ( Q6 510 )
No suitable infostructure found ( Q6 511 )
The value for selection field &1 is too long ( Q6 512 )
Infostructure &1 is being built (file &2) ( Q6 601 )
Infostructure &1 was built for file &2 ( Q6 602 )
Error in build of infostructure &1 for file &2 ( Q6 603 )
Unknown status &1 for infostructure &2, file &3 ( Q6 604 )
Infostructure &1 was built for file &2, although delete not complete ( Q6 605 )
Infostructure &1, file &2: Delete program running ( Q6 606 )
Error in build of infostructure &1 for file &2 ( Q6 607 )
First, select a node (object, session, file, or infostructure) ( Q6 608 )
Program error (&1) ( Q6 609 )
First, select an object or an infostructure ( Q6 610 )
Infostructure &1 has fixed table &2 ( Q6 659 )
Field catalog &1 already exists and has not been generated ( Q6 701 )
Infostructure &1 already exists and is not generated ( Q6 702 )
Field catalog &1 does not exist ( Q6 703 )
Field &1 is not in field catalog &2 ( Q6 704 )
Infostructure &1 is not a generated infostructure ( Q6 705 )
Field catalog &1 is not a generated field catalog ( Q6 706 )
Infostructure &1 no longer matches changed field catalog &2 ( Q6 707 )
Delete the structure table(s) for infostructure &1 ( Q6 708 )
Info structure &1 was adjusted to amended field catalog &2 ( Q6 709 )
Infostructure &1 was not generated ( Q6 712 )
You can only process new entries collectively ( Q7 011 )
Internal error: Long text indicator is not compatible with long text ( Q7 091 )
A long text already exists with the new long text key ( Q7 092 )
Long text key is not defined for use with this structure ( Q7 093 )
Internal error: This object is not defined ( Q7 094 )
No long text exists with this key ( Q7 096 )
Long text ID used is not allowed by the system ( Q7 097 )
An error occurred during printing ( Q7 098 )
Internal error occurred during processing ( Q7 099 )
Class does not exist ( Q7 100 )
Class is invalid ( Q7 101 )
You can only access the initial screen using a change number ( Q7 102 )
Change number is not allowed for the classification ( Q7 103 )
You do not have authorization for the class type ( Q7 104 )
Classification data was not deleted ( Q7 105 )
Date in record is the same as the date for change number: Not allowed ( Q7 106 )
Errors occurred during update of long texts ( Q7 108 )
You are not in "display" or "change" mode ( Q7 111 )
The system does not allow for multiple classification of the object ( Q7 114 )
No standard class type is defined for code groups ( Q7 115 )
Copy the selected data using F4 function key ( Q7 116 )
The object is linked to another client ( Q7 121 )
Object is locked by another user ( Q7 122 )
Internal error: View cluster does not exist ( Q7 123 )
Internal error: View cluster definition is inconsistent ( Q7 124 )
Internal error: Generated view-maintenance modules are missing ( Q7 125 )
You are not authorized to create or change data ( Q7 126 )
You do not have display authorization ( Q7 127 )
Internal error: Object could not be found in DDIC ( Q7 128 )
Internal error: Object is not in table TVDIR ( Q7 129 )
You do not have authorization for cross-client objects ( Q7 130 )
Internal error: MAINTENANCE_ACTION contains invalid value ( Q7 131 )
Internal error: Error when saving corrections ( Q7 132 )
Internal error: System error occurred during locking procedure ( Q7 133 )
Internal error: Selection table contains unknown fields ( Q7 134 )
Error: Correction number is missing ( Q7 135 )
Internal error during authorization check ( Q7 137 )
There is an invalid authorization in user master data ( Q7 138 )
Internal error: The lock could not be removed ( Q7 141 )
You do not have authorization for &1 code group(s) in the catalog &2 ( Q7 143 )
Entries have not been made in required fields for code group &1 ( Q7 151 )
Internal error: No entries in required fields for selected set & ( Q7 152 )
Data locked by user & (display only) ( Q7 161 )
No task list from task list type "S" found for material ( Q7 185 )
The update was canceled (mode &, table &, RC &) ( Q7 204 )
Error occurred during update ( Q7 205 )
Code & is being used and cannot be deleted ( Q7 221 )
Group code is assigned to a selected set. You cannot delete it ( Q7 253 )
No entry exists for catalog & in the Customizing table ( Q7 299 )
Use the transaction & to avoid data inconsistencies ( Q7 338 )
Short text table for code group &1/inspection catalog &2 has no entries ( Q7 374 )
& code groups found to be distributed ( Q7 378 )
Transaction no longer valid for catalog '3' ( Q7 400 )
Data not yet transmitted from statistics buffer ( Q8 001 )
Begin of statistical records ( Q8 002 )
Function is not yet supported ( Q8 003 )
F12 = Cancel, Enter = Ok ( Q8 004 )
End of statistical records reached ( Q8 005 )
No statistical record for & found with given criteria ( Q8 006 )
Enter data ID between A1 and ZZ ( Q8 007 )
Data ID has already been used by & ( Q8 008 )
New stat. data found in dataset & ( Q8 009 )
Choose one item for selection ( Q8 010 )
Select only ONE item ( Q8 011 )
Select one function ( Q8 012 )
Select only ONE function ( Q8 013 )
No statistical data available for server & ( Q8 014 )
Analysis data &/&/&/& not available ( Q8 015 )
No analysis data for period (Try to reorg. statistical data) ( Q8 016 )
No analysis data for period (Try to reorg. statistical data) ( Q8 017 )
& stat.file & cannot be opened ( Q8 018 )
Data is not statistical data ( Q8 019 )
No data available for selected period ( Q8 020 )
No data available for selected period/application server ( Q8 021 )
Stat.file is nonlocal (Examine data from server &) ( Q8 022 )
Table MONI is locked by user & ( Q8 023 )
Table MONI cannot be locked due to system failure ( Q8 024 )
Use time >= & sec or stat/recno <= & for good monitor ( Q8 025 )
Place cursor on selection line for new selection ( Q8 026 )
Statistical file has been deleted & ( Q8 027 )
Data is only available for the last days stored (max. & days) ( Q8 029 )
Beginning of server list reached ( Q8 030 )
End of server list reached ( Q8 031 )
A file already exists with this name ( Q8 032 )
Unable to open file with specified path ( Q8 033 )
No more indexes for data available (delete other external data) ( Q8 034 )
Data & can only be analyzed from application server & ( Q8 035 )
Print request was submitted ( Q8 036 )
Incomplete statistics for this period (Start time of statistics is &) ( Q8 038 )
Pickup aggregation level has to be lower than main aggregation level ( Q8 039 )
No data for previous period available ( Q8 041 )
No data available for next period ( Q8 042 )
No data available for selected period/application server ( Q8 043 )
No stat. record available with key & ( Q8 044 )
List created today, (HHMMSS) & ago ( Q8 045 )
No statistical data available ( Q8 046 )
Data extract transferred successfully to perf.database MONI/PAHI/OSMON ( Q8 047 )
MONI ---> seq. file transfer aborted (&). Record = & ( Q8 048 )
Transfer completed: MONI/PAHI/OSMON --> & ( Q8 049 )
MONI has & entries with key & & ( Q8 050 )
'LO' (log book) records can only be deleted as last records ( Q8 051 )
Original sequential file will not be deleted ( Q8 052 )
Mismatch in structure of & in DDIC and extract file ( Q8 053 )
Data coll. for TOTAL server manually switched off since & ( Q8 054 )
Data collection for TOTAL server set to sleeping status since & ( Q8 055 )
Workload data transferred to spool & & ( Q8 056 )
Check the time format ( Q8 058 )
The statistic file cannot be read ( Q8 071 )
The statistic is not available ( Q8 072 )
Internal error: Statistic version conflict ( Q8 075 )
Cannot read profile of instance & ( Q8 079 )
Max.number of records updated (Refresh to get most recent records) ( Q8 080 )
Parameter changes saved ( Q8 081 )
Error saving parameter changes ( Q8 082 )
Last parameter modification on & / & by user & ( Q8 083 )
Parameters are set to default parameters ( Q8 084 )
Time slot data displayed will not be saved to performance database ( Q8 085 )
Displayed data saved to performance database ( Q8 086 )
Select valid time interval ( Q8 087 )
No alert parameters found in Table TSEXC ( Q8 088 )
Alerts: dialog = '&' / update = '&' ( Q8 089 )
Authorization & missing (Only your records are shown with name) ( Q8 090 )
No table statistics found for application server & ( Q8 091 )
Table statistics has not been reset ( Q8 092 )
No table access statistics for day & found ( Q8 093 )
Table stat. for & successfully transfered to MONI (&) ( Q8 094 )
Place cursor on valid line with table entries ( Q8 095 )
No DDIC information for selected table found ( Q8 096 )
No statistics available (Profile & is set to &) ( Q8 097 )
Select one function ( Q8 099 )
No data available for file systems ( Q8 102 )
Table & not in SAP data dictionary ( Q8 103 )
No DB object selected ( Q8 104 )
DB object & is not defined in the SAP data dictionary ( Q8 105 )
Specify a DB object ( Q8 106 )
Date is not in the past ( Q8 107 )
No parameters found for criteria specified ( Q8 108 )
Place cursor on valid & ( Q8 109 )
Active parameter values are only available for current system ( Q8 110 )
Today's parameter changes might not be logged ( Q8 111 )
DB object & is of type & ( Q8 114 )
No table DB statistics are available; profile & is set to & ( Q8 140 )
Internal error at call of DB_RSQLSTA in RSTABSTA, rc = & ( Q8 141 )
Internal error at call of DB_BUFINFO in RSTABSTA, rc = & ( Q8 142 )
Only client & is to be buffered, was set in profile & ( Q8 143 )
Buffer statistics for & transferred to MONI ( Q8 144 )
Missing CALL 'SAPTUNE' ID '&'. SY-SUBRC & ( Q8 150 )
Buffer & not supported ( Q8 159 )
Table buffer cannot be reset ( Q8 160 )
Partial table buffer cannot be reset ( Q8 161 )
Table buffer reset ( Q8 162 )
Partial table buffer reset ( Q8 163 )
CUA buffer reset ( Q8 164 )
Unable to reset CUA buffer ( Q8 165 )
No statistics available for selected table & ( Q8 181 )
Area & in table MONI was deleted ( Q8 194 )
Unable to delete area & in table MONI (see long text) ( Q8 195 )
Could not convert area & & in table MONI ( Q8 197 )
No data found ( Q8 200 )
You do not have authorization & ( Q8 202 )
& is not available ( Q8 203 )
Explain SQL is not possible for & ( Q8 212 )
Complete information only for activated RFC calls (> settings) ( Q8 249 )
RFC error: & ( Q8 250 )
SAP statistic is turned off ( Q8 251 )
Invalid profile parameter detected ( Q8 252 )
Internal error (SAP statistic is not available) ( Q8 253 )
No detailed information about the program buffer available ( Q8 254 )
No detailed information about the SAP cursor cache available ( Q8 255 )
Buffer summary report is available only on the local server ( Q8 256 )
Storage overview is available only on the local server ( Q8 257 )
Number range buffer statistic is available only on the local server ( Q8 258 )
Semaphore statistic is available only on the local server ( Q8 259 )
Buffer not supported ( Q8 262 )
Reset of buffer failed ( Q8 263 )
Sorted by & ( Q8 264 )
Not sorted. Position the cursor on a column. ( Q8 265 )
No selection made, nothing changed ( Q8 266 )
No buffer statistic history available ( Q8 267 )
Outdated maximum values cleared ( Q8 268 )
No maximum values changed ( Q8 269 )
No data for SAP executables (disp+work) for operating system & ( Q8 271 )
Call C-function SYSTEM failed. No data for SAP executables (disp+work) ( Q8 272 )
No data about generic regions available ( Q8 273 )
Select a synchronization class ( Q8 274 )
Enter a table name or a description pattern ( Q8 275 )
User & does not exist ( Q8 286 )
SAPOSCOL not running (shared memory available) ( Q8 300 )
SAPOSCOL busy, try again (should not appear twice) ( Q8 301 )
Collector - Internal error: Get address failed ( Q8 302 )
Version conflict: Uncompatible version of collector and applications ( Q8 303 )
No network collector running on any & application server ( Q8 304 )
& & & & & ( Q8 333 )
Table &1 does not exist ( Q8 350 )
No authorization to perform the detailed table row analysis ( Q8 354 )
System & on & is not a dialog system ( Q8 400 )
No operation for this selection ( Q8 409 )
Internal error: bplan entry not found ( Q8 410 )
No action logs are available for this action ( Q8 411 )
Where is the action log ? ( Q8 412 )
Select a day for this function ( Q8 413 )
No action logs found for this day ( Q8 414 )
Selected function not useful for past days ( Q8 415 )
Nothing changed ( Q8 416 )
No jobs found to delete ( Q8 417 )
Select an action ( Q8 418 )
Immediate start cancelled ( Q8 419 )
Action started ( Q8 420 )
What shall I do with status & ? ( Q8 421 )
Job cannot be scheduled in the past ( Q8 422 )
Given time collides with existing action ( Q8 423 )
Parameter type & unknown ( Q8 424 )
Error occurred ( Q8 425 )
Internal error: Unknown action ( Q8 426 )
Add action cancelled ( Q8 427 )
New action added ( Q8 428 )
Nothing changed ( Q8 429 )
Change action cancelled ( Q8 430 )
Action successfully changed ( Q8 431 )
Action has no parameters ( Q8 432 )
Select an action entry ( Q8 433 )
Entering pattern parameters cancelled ( Q8 434 )
Collisions found - operation cancelled ( Q8 435 )
This is a follow-up entry ( Q8 436 )
Applying action pattern cancelled ( Q8 437 )
Action pattern successfully applied ( Q8 438 )
Automatic log save switched off ( Q8 439 )
Internal error: problem during delete ( Q8 440 )
Internal error: problem during insert ( Q8 441 )
Automatic log save turned on ( Q8 442 )
Internal error: Problem while deleting job ( Q8 443 )
Internal error: Problem while adding job ( Q8 444 )
Internal error: Attempt to repair error failed ( Q8 445 )
Internal error: problem during update ( Q8 446 )
No old job found ( Q8 447 )
Error while searching job ( Q8 448 )
More than one old job found ( Q8 449 )
Operation cancelled ( Q8 465 )
No application server found on this server ( Q8 470 )
Action successfully deleted ( Q8 471 )
The selected action cannot be changed ( Q8 472 )
The selected action cannot be deleted ( Q8 473 )
Where is the action log? ( Q8 474 )
The selected action does not use any volumes ( Q8 475 )
Add pattern cancelled ( Q8 476 )
Number of weeks must be > 0 ( Q8 477 )
Index for current week must be within 1 and & ( Q8 478 )
Entries per day must be > 0 ( Q8 479 )
No volumes specified (take them from INIT_SAP) ( Q8 480 )
Choose at least one tablespace ( Q8 481 )
Option & unknown ( Q8 482 )
No option ? ( Q8 483 )
Undefined error occurred (Sy-subrc = &) ( Q8 488 )
Old data sorted ( Q8 496 )
No information available & ( Q8 497 )
Error in & ( Q8 498 )
Fatal error in & ( Q8 499 )
There are no critical tables/indexes ( Q8 501 )
No data found for this selection ( Q8 521 )
Not possible to create index & on a runtime table ( Q8 530 )
Create missing indexes - see background job & ( Q8 531 )
No write authorization for & ( Q8 552 )
Unable to open & ( Q8 553 )
No volume set selected ( Q8 580 )
No dbspace selected ( Q8 581 )
No table selected ( Q8 582 )
Trace is switched on for user & on & ( Q8 630 )
Trace is switched on for & on & ( Q8 634 )
Display statistics of SQL DB were transferred to MONI ( Q8 700 )
Database and log statistics were transferred to MONI ( Q8 701 )
Devspace statistics of SQL DB were transferred to MONO ( Q8 702 )
SQL DB data transfer to MONI aborted ( Q8 703 )
Position the cursor on a valid line for selection ( Q8 705 )
File & with SQL DB operating messages not found ( Q8 706 )
No tables found for this selection ( Q8 707 )
No SAP DBA backup tables can be accessed ( Q8 708 )
No scheduling of backup operations possible ( Q8 709 )
There are active action records in client & (updates not possible here) ( Q8 800 )
Unable to lock the planning table sdbap --> check SAP Enqueue Admin. ( Q8 801 )
Commit failed in &, object &, function & ( Q8 802 )
No job logs available for this selection ( Q8 803 )
Unable to read detail log &.& ( Q8 804 )
No application server found on the database server ( Q8 805 )
GET_JOB_RUNTIME_INFO failed (internal error) ( Q8 806 )
STRING_CONCATENATE failed (internal error) ( Q8 807 )
JOB_CLOSE failed, return code & (internal error) ( Q8 808 )
JOB_SUBMIT failed, return code & (internal error) ( Q8 809 )
JOB_OPEN failed, return code & (internal error) ( Q8 810 )
Operating system & not supported ( Q8 811 )
Operator & is not permitted for one of the specified values ( Q8 850 )
You must specify at least one value to be checked ( Q8 851 )
At least two of the specified check values agree ( Q8 853 )
You have specified operator & but no value area ( Q8 854 )
Operator & was specified, but the values are in descending order ( Q8 855 )
Operator & was specified, but the values are in ascending order ( Q8 856 )
Unable to find the specified parameter & ( Q8 862 )
Configuration error for parameter & with operator & ( Q8 864 )
The results of the system check may not be exact ( Q8 869 )
Values saved in table TNETMAC ( Q8 870 )
Table TNETMAC is locked (try again) ( Q8 871 )
RSINFINI successfully completed ( Q8 890 )
Incorrect value specified ( Q8 891 )
&1&2&3&4 ( Q8 897 )
Place cursor on a valid line ( Q8 898 )
&1 &2 &3 &4 ( Q8 899 )
Order &2 is already being processed by user &1 ( QA 005 )
Order &1 cannot be processed (system error) ( QA 006 )
Inspection lot &2 is being processed by &1 ( QA 007 )
Inspection lot &1 cannot be processed (system error) ( QA 008 )
Order &1 is not assigned to material &2 ( QA 009 )
Order &1 is not available or is not a QM order ( QA 010 )
Order &1 cannot be assigned to plant &2 ( QA 011 )
Material &2 is being processed by user &1 ( QA 012 )
Entry for material &1, plant &2 was already changed ( QA 013 )
The data was saved ( QA 014 )
No data was found for the specified selection criteria ( QA 015 )
Function could not be performed - check your selection ( QA 016 )
Valuation type cannot be determined for material &1 ( QA 017 )
Check the entry for the plant ( QA 018 )
Enter either a cost center or an order ( QA 019 )
Cost center &2 is not available in controlling area &1 ( QA 020 )
Controlling area &1 is not compatible with plant &2 ( QA 022 )
A statistical order cannot be used as an account assignment ( QA 024 )
Company code &1 from order &2 is not compatible with plant &3 ( QA 025 )
You have entered &1 order type - only type 01 is allowed ( QA 026 )
Inspection lot & is already being processed - changes cannot be made ( QA 027 )
Partial lot &1 &2 is already being processed ( QA 029 )
A fatal error occurred during the cancellation of inspection lot & ( QA 031 )
A fatal error occurred during the cancellation of partial lot & & ( QA 032 )
Position the cursor before calling the function ( QA 035 )
You cannot cancel the confirmation ( QA 036 )
There is no operation that can be confirmed ( QA 037 )
No inspection results are available for the partial lot ( QA 040 )
Fatal error - no inspection point records exist for partial lot ( QA 042 )
No account assignment is specified for order generation ( QA 044 )
You cannot cancel GR, since inspection lot is already partly posted ( QA 046 )
GR cannot be canceled - document qty does not equal inspection lot qty ( QA 047 )
QM order is assigned to a material ( QA 048 )
Quantity correction is no longer possible- lot quantity already posted ( QA 049 )
Either maintain all entries for transaction data or none at all ( QA 050 )
Deletion periods for lots must be longer than the other periods ( QA 051 )
Deletion period for operations/characteristics is too short ( QA 052 )
Deletion period for samples is too short ( QA 053 )
Archiving period is not compatible with deletion periods ( QA 054 )
Only '06' order types are allowed (QM order) ( QA 055 )
The lowest value for the confrmed quantity is &1 &2 ( QA 056 )
You cannot immediately cancel a confirmation that has just been made ( QA 057 )
The inspection lot cannot be created because of an error ( QA 058 )
Material is maintained with revision level ( QA 059 )
Inspection lot &2 is blocked for user &1 - item without activity ( QA 060 )
Information about the insp. lot list when there are inventory differences ( QA 061 )
Selection(s) insufficient for complete difference posting ( QA 062 )
No division has been assigned to material &1 ( QA 063 )
Error: Duplicated inspection lot in memory table (lot no: &1) ( QA 064 )
After change, stock type no longer compatible with document item ( QA 066 )
Movement type for required transfer posting is missing from table TQ07M ( QA 067 )
You cannot make a quantity transfer posting for insp. lot &1 ( QA 068 )
You cannot make a quantity transfer posting for blocked stock ( QA 069 )
Error when saving the mat. document data for the insp. lot ( QA 070 )
You have already recorded confirmations for the insp. lot ( QA 071 )
Samp. calculation can't be reset because of the status of mat. sample &1 ( QA 072 )
Sample calculation can't be reset because material sample &1 is locked ( QA 073 )
Sample calculation cannot be reset due to a system error ( QA 074 )
No inspection lot could be determined for document item & & & & ( QA 077 )
Inspection lot & cannot be used for document item & & & ( QA 078 )
& were found for distributed inspection types ( QA 079 )
The quality score procedure &2 does not exist for inspection type &1 ( QA 080 )
Material doc. cancellation not possible since insp. stock transferred ( QA 082 )
Material doc. cancellation not possible since insp. stock transferred ( QA 083 )
Customizing prevents changing or creation of links to inspection lots ( QA 086 )
First maintain table TQ01 for transaction & ( QA 103 )
You must enter a material for the origin specified ( QA 105 )
The end date of the inspection is in the past ( QA 113 )
The start date of the inspection is in the past ( QA 115 )
No plan specification could be found for the selection criteria ( QA 117 )
You cannot enter a material for the specified origin ( QA 119 )
Delete the long text first ( QA 122 )
Additional inspection types are being modified ( QA 123 )
Enter the start date as well as the end date ( QA 129 )
A date you have entered is not compatible with the calculated date ( QA 132 )
Specification(s) not yet assigned ( QA 134 )
No document data is available for the lot ( QA 135 )
No operations were generated for the inspection lot ( QA 136 )
Inspection type & is not defined ( QA 139 )
Origin & is not defined ( QA 141 )
To activate QM, the inspection stock for the material must be empty ( QA 142 )
To deactivate QM, the inspection stock for the material must be empty ( QA 148 )
Instruction cannot be printed- no sample was calculated ( QA 151 )
Certain purchase orders are still open ( QA 158 )
No inspection lot could be selected ( QA 164 )
Maintain a quality score procedure for inspection type & ( QA 165 )
Lot stock is fully posted - quantity postings therefore completed ( QA 167 )
You do not have authorization for inspection type &1 in plant &2 ( QA 170 )
Sample size could not be calculated ( QA 185 )
No inspection lot could be created for item & ( QA 186 )
Preparation for the quality inspection could not be completed ( QA 187 )
No routing was assigned to the order ( QA 188 )
No purchasing organization was maintained ( QA 189 )
No material is assigned to the order ( QA 192 )
The order does not contain any items ( QA 193 )
In the production order the quantity to be produced is 0 ( QA 194 )
A routing was already assigned via the order ( QA 195 )
The date is after the specified end of the factory calendar ( QA 196 )
The date is before the specified start of the factory calendar ( QA 198 )
No Q-info record found for material &, rev.level &, suppl. & and plant & ( QA 203 )
Edit the entries for the blocking functions completely ( QA 204 )
Maintain certificate type & ( QA 205 )
Maintain control key & ( QA 206 )
Goods receipt for material &1 and supplier &2 is blocked ( QA 208 )
Goods receipt for supplier & is blocked ( QA 209 )
Certificate of type & is required ( QA 210 )
A certificate of type & is also required for subsequent deliveries ( QA 211 )
The batch is copied from the order ( QA 213 )
Inspection type & has already been assigned ( QA 214 )
There is no Q-info record for material &1 and supplier &2 ( QA 215 )
Inspection type & is not assigned to origin & ( QA 216 )
Inspection type & is not available in the QINF record ( QA 218 )
An inspection lot already exists for order & ( QA 219 )
QM in procurement is not active ( QA 220 )
No inspection types available in the QINF record ( QA 224 )
Error while changing QINF record & & & ( QA 225 )
The data was not completely transferred to the QINF update ( QA 226 )
No variants for inspection type are possible for origin & ( QA 227 )
No inspection lot can be opened for this material and supplier ( QA 228 )
The QINF record & & & is being processed ( QA 229 )
You have already recorded an item for material & supplier & ( QA 230 )
Error while importing from memory & & ( QA 232 )
No plan selection can be made for plan type & ( QA 233 )
No inspection lot origin was assigned to inspection type &1 ( QA 235 )
Internal error while creating inspection lot ( QA 236 )
You cannot make a transfer posting without a serial number ( QA 238 )
The sample drawing instruction is printed when you leave the transaction ( QA 239 )
The inspection instruction is printed when you leave the transaction ( QA 240 )
Sample was not calculated ( QA 241 )
Customizing for inspection type definition is not completely maintained ( QA 242 )
Fatal error - inspection lot & not found ( QA 243 )
Inspection type &1 must not be deactivated ( QA 245 )
Check the Customizing table for inspection type & ( QA 246 )
You must mark at least one partial lot for the UD selection ( QA 249 )
Incorrect call for inspection lot maintenance function module ( QA 251 )
Enter a batch number ( QA 252 )
The preparatory steps for the quality inspection could not be completed ( QA 253 )
Maintenance of sample size is only permitted for lots without plan ( QA 254 )
You cannot create an inspection lot ( QA 257 )
Material document for lot was not found- quantity correction not possible ( QA 258 )
Quantity correction for origin &1 is not supported ( QA 259 )
Order type &1 of the QM order does not correspond to plant specifications ( QA 260 )
You must specify a business area ( QA 261 )
The QM order does not contain any costs ( QA 262 )
Cost display- report group does not exist ( QA 263 )
Costs were determined- see cost overview ( QA 264 )
You are not authorized to display the costs ( QA 265 )
You cannot correct the actual quantity, since a serial number is required ( QA 267 )
You cannot correct actual quantities for insp. lots of origin &1 ( QA 268 )
Batches cannot be classified with this inspection lot ( QA 273 )
Inspection stock available for material &1 &2 ( QA 274 )
Sample size could not be calculated ( QA 275 )
Task list could not be found although it was defined for this inspection ( QA 276 )
There is no specification for this material ( QA 277 )
No inspection plan could be found ( QA 278 )
There is no specification for this material ( QA 279 )
No valid inspection type for material &2 was found or selected ( QA 280 )
Manual lots cannot be used for origin & ( QA 282 )
Set 'Preferred inspection type' indicator for either insp. type &1 or &2 ( QA 283 )
No inspection results were entered for partial lot &1 ( QA 284 )
Insp. point field combination &1 does not exist ( QA 285 )
Unit of measure &1 cannot be converted to material base unit of measure ( QA 286 )
Sample processing during inspections for delivery is not allowed ( QA 287 )
No relevant objects exist in the object list for the order ( QA 288 )
Act. qty. corrections not possible, due to stock transfer to other plant ( QA 289 )
Error in inspection lot management (QPL1_CHECK_LOT_COLLECTION) ( QA 290 )
The inspection lot for the sample requires insp. point type for samples ( QA 292 )
Defective QMAT record (&1 &2) transferred to update ( QA 294 )
The inspection lot &1 is locked and could not be updated ( QA 295 )
Order changes are not copied to the inspection lot ( QA 296 )
There should be entries for these three fields ( QA 297 )
You cannot correct actual qty, since insp. lot created by reversal doc. ( QA 298 )
Inspection type is activated and insp. lots are created for insp. type & ( QA 299 )
Inspection type &1 (goods issue) is already active ( QA 300 )
Inspection type &1 (delivery) is already active ( QA 301 )
At least one additional inspection type was not activated ( QA 302 )
Actual qty correction is not poss., because the insp. lot has no mat. doc ( QA 303 )
No data is available, since 'Insp. lot w/o task list and chars' was set ( QA 304 )
The 'Active' indicator is canceled for inspection type & ( QA 305 )
The indicator 'Preferred inspection type' is canceled for insp. type &1 ( QA 306 )
The 'Active' indicator is canceled for inspection type &1 ( QA 307 )
You can longer confirm for the order & ( QA 308 )
Goods receipt blocked for this purchasing document item by QM ( QA 309 )
Customer enhancement QAAT0002 has been incorrectly implemented ( QA 310 )
Could not read the text for the inspection type ( QA 311 )
A category &1 inspected certificate is required ( QA 312 )
A category &1 inspected cert. is also required for follow-up deliveries ( QA 313 )
& materials cannot be processed because of missing authorizations ( QA 314 )
Transfer posting not possible since the stock is managed using HUs ( QA 315 )
Inspection lot cannot be created ( QA 317 )
Specify whether a certificate of type &1 is included ( QA 319 )
Number of containers in inspection lot must not be larger than 999,999 ( QA 321 )
No inspection points have been created for the material samples ( QA 322 )
Insp. point field combination for inspection plan &1 counter &2 incorrect ( QA 323 )
Follow-up action & cannot be used ( QA 330 )
Follow-up action &1 not allowed for usage &2 ( QA 331 )
Inspection lot &1 for order &2 not updated; usage decision already made ( QA 340 )
Inspection lot &1 for order &2 not updated; inspection lot blocked ( QA 341 )
Inspection lot &1 for order &2 not updated; error when changing ( QA 342 )
You are not authorized to create this inspection lot ( QA 400 )
You are not authorized to change this inspection lot ( QA 401 )
You are not authorized to display this inspection lot ( QA 402 )
You are not authorized to correct actual quantities for this insp. lot ( QA 403 )
You are not authorized to complete this lot with open charcs or insp. pts ( QA 404 )
You are not authorized for inspection completion and usage decision ( QA 405 )
You are not authorized to display usage decisions for this inspection lot ( QA 406 )
You are not authorized to digitally sign this usage decision ( QA 407 )
You are not authorized for quantity transfer postings for this insp. lot ( QA 408 )
You are not authorized to cancel sample determination for this insp. lot ( QA 409 )
You are not authorized to digitally sign the sample-drawing confirmation ( QA 410 )
You are not authorized to display inspection results for this insp. lot ( QA 411 )
You are not authorized to edit inspection results for this insp. lot ( QA 412 )
You are not authorized to sign inspection results for this inspection lot ( QA 413 )
You are not authorized to create inspection points for this insp. lot ( QA 414 )
You are not authorized to change inspection points for this insp. lot ( QA 415 )
You are not authorized to display inspection points for this insp. lot ( QA 416 )
Inspection type &1 not taken into account as authorization missing ( QA 480 )
Inspection type &1 is not relevant and is not taken into account ( QA 481 )
You cannot transfer stock; batch settings differ in relevant plants ( QA 494 )
Change the inspection stock of material & in QM only ( QA 495 )
Material &1 &2 is not inspection-relevant for inspection type &3 ( QA 496 )
You cannot transfer stock of material &1 to plant &2 ( QA 497 )
Enter the sample size manually ( QA 498 )
The indicator 'Post to inspection stock' is not set for inspection type & ( QA 500 )
No quality score procedure is planned for inspection type &1 ( QA 501 )
You cannot cancel inspection lot &1 ( QA 515 )
Cancelation of inspection lot &1 is not possible ( QA 518 )
Inspection type &1 is not maintained ( QA 520 )
Application: QM Client: & ( QA 801 )
Database modification for status conversion was not fully completed ( QA 802 )
Existing status information from QM will be deleted ( QA 803 )
Note the format when entering code group and code ( QA 898 )
Stock-relevant inspection types are not activated ( QA 899 )
Could not update time stamp of last worklist ( QACT 006 )
Wrong client & for transport route configuration (ctc=&); see long text ( QACT 008 )
Error when generating/updating worklist ( QACT 009 )
Select entries before executing the function & ( QACT 012 )
Error when saving the QA settings ( QACT 021 )
You can activate approval steps for QA systems only ( QACT 022 )
You cannot save approval step & in the status 'Active' ( QACT 023 )
You cannot change requests that have already been processed ( QACT 026 )
Error when saving the data ( QACT 033 )
Data changed by user &; update the QA worklist ( QACT 035 )
Error when checking the consistency of the worklist ( QACT 036 )
No authorization for editing approval step of type & ( QACT 037 )
No authorization for deleting requests ( QACT 039 )
Error during authorization check ( QACT 040 )
No authorization for distributing the QA status ( QACT 041 )
Choose an approval step to edit the requests ( QACT 042 )
Select an approval step and a target client ( QACT 043 )
Choose one target client to edit the requests ( QACT 044 )
Error when editing note (program &1/method &2/return code &3) ( QACT 046 )
Create a note ( QACT 047 )
Cache for CCMS Alert Monitor was reset ( QACT 049 )
Action terminated, cannot process worklist ( QACT 055 )
Dual control principle was not followed ( QACT 059 )
Could not execute command &1 ( QACT 100 )
Command &1 exited with a warning ( QACT 101 )
System could not be included in CCMS Alert Monitor ( QACT 203 )
There is no account assignment object assigned to notification & ( QALK 001 )
The notification is not assigned to a company code ( QALK 002 )
You have no authorization to display costs ( QALK 003 )
You have no authorization to create/display costs ( QALK 004 )
Execution Service not allowed for task & & ( QALK 006 )
Execution Service not allowed for notification & ( QALK 007 )
Newly-created costing items will not be assigned to a task ( QALK 008 )
Enter a currency ( QALK 009 )
No account assignment object was determined for notification & ( QALK 010 )
No costing items were determined for notification & ( QALK 011 )
Missing costing model/model valuation for notification & ( QALK 012 )
No execution service could be determined ( QALK 013 )
No items exist for execution service ( QALK 015 )
No WBS element is assigned to the person ( QALK 050 )
No WBS element is uniquely assigned to a person ( QALK 051 )
User is not assigned ( QALK 052 )
No RFC destination found for logical system &1 ( QAM 012 )
Structure &1 does not exist (step &2, mapping &3) ( QAM 016 )
Search result structure missing (step &1, mapping &2) ( QAM 018 )
Category &1 is excluded from the selection (invalid criterion) ( QAM 023 )
No response to &1 of &2 search queries due to timeout ( QAM 037 )
More than &1 hits in category &2 (system &3) ( QAM 050 )
Code selection &1 is not permitted (input template 'n_nnnnnnnn_nnnn') ( QAM 056 )
Root node of BOPF object &1 does not contain action &2 ( QAM 065 )
Search query results in more hits than the max. defined for the worklist ( QAM 070 )
Default navigation was executed for this workflow ( QAM 074 )
Method for status change in system &1 not available ( QAM 136 )
Activity &1 has a valid copy &2 and cannot therefore be copied ( QAM 138 )
Activity &1 cannot be copied; prerequisites are not fulfilled ( QAM 139 )
Enter a supplier, or set to "Only for purchasing info" ( QB 002 )
No suitable material/supplier combinations exist ( QB 008 )
The status you entered cannot be converted into an internal status ( QB 052 )
Inspection type was not entered ( QB 053 )
Inspection lot number for achieved status will be cancelled, if required ( QB 054 )
Status maintenance is not possible- insp.lot for status change is open ( QB 055 )
Status profile cannot be changed- status is set ( QB 056 )
Status management for Q info record will be initialized ( QB 057 )
Status profile is assigned ( QB 058 )
No GR inspection should take place ( QB 059 )
Check the source inspection and GR inspection ( QB 060 )
Select purchase order item ( QB 061 )
Maintain inspection type(s) &1 for material &2 ( QB 062 )
Indicator for preventing GR inspection will be canceled ( QB 063 )
Set only one indicator ( QB 064 )
Deletion flag not allowed for active status profile ( QB 067 )
Q-info record not allowed for material & (manufacturer part profile) ( QB 068 )
No purchasing organization for plant & could be determined ( QB 071 )
You can only enter a date, if a QS system has been entered ( QB 072 )
Enter a date ( QB 073 )
QM system is certified / An inspection is to take place ( QB 074 )
Create the system settings for transaction & ( QB 100 )
Quality info record does not exist ( QB 101 )
Quality info record already exists ( QB 102 )
A quality info record for material & is being created ( QB 103 )
Copy model does not exist ( QB 105 )
Quantity is not a release criterion ( QB 108 )
Quality agreement was not assigned yet ( QB 113 )
Supplier is not released ( QB 115 )
Release date is in the past ( QB 120 )
Set only one indicator ( QB 121 )
Quantities cannot be converted ( QB 122 )
Blocks are not active because of the control key in material master ( QB 123 )
You have not entered a release quantity yet ( QB 124 )
Inspection type & for GR origin is not available ( QB 125 )
Material is maintained with revision level ( QB 126 )
Revision level &1 for material &2 does not exist ( QB 127 )
Inconsistency with assigned Q agreement ( QB 128 )
QM system &1 does not fulfill material requirements &2 ( QB 129 )
A source inspection for the selection criteria is not possible ( QB 150 )
No source inspections are required ( QB 151 )
Selection is only allowed if enhanced certificate processing is active ( QB 152 )
Certificate &2 is being processed by &1 ( QB 200 )
Supplier's/manufacturer's QM system only valid to &1 ( QB 301 )
Supplier's/manufacturer's QM system no longer valid for & items ( QB 302 )
Blocking is not permitted - assignments still exist ( QC 001 )
Assignment not permitted- cert.profile &1 &2 &3 not yet released ( QC 002 )
No certificate type was indicated ( QC 003 )
No profile number was indicated ( QC 004 )
The name of the layout set contains impermissible characters ( QC 005 )
Rejected lots can also be selected ( QC 006 )
Select a score between &1 and &2 ( QC 007 )
The certificate type indicated does not exist ( QC 008 )
A profile &1 &2 is not available ( QC 009 )
Material &1 is not available ( QC 010 )
A certificate profile &1 certificate type &2 version &3 was not found ( QC 011 )
Not all data was found for characteristic &1 in cert.profile &2 ( QC 012 )
Master inspection characteristic &1 plant &2 is not available ( QC 013 )
Version &1 of characteristic &2 plant &3 was not released ( QC 014 )
Version &1 of characteristic &2 plant &3 is not available ( QC 015 )
Number &1 is already available ( QC 016 )
The profile name contains impermissible characters ( QC 017 )
No profile was found for the indicated selection &1 &2 ( QC 018 )
The last selected characteristic was reached ( QC 019 )
No material was assigned to certificate profile &1 &2, version &3 ( QC 020 )
The material specification was not maintained ( QC 021 )
No keys were assigned to certificate profile &1 &2, version &3 ( QC 022 )
Class characteristic &1 is not released for use ( QC 024 )
There are no specifications for class characteristic &1 ( QC 025 )
Class characteristic &1 has more than two intervals ( QC 026 )
Class characteristic &1 is not available ( QC 027 )
Class characteristic &1 cannot be linked to a master inspection char. ( QC 028 )
For the new version &1, you can copy data from an earlier version ( QC 029 )
No certificate profile was found ( QC 030 )
No characteristics exist for certificate profile &1 &2, version &3 ( QC 031 )
A material specification can only be read with a material ( QC 032 )
The material specification has not been maintained for material &1 ( QC 033 )
An active version of layout set &1 is not yet available ( QC 034 )
No short text was found for domain &1, fixed value &2 in language &3 ( QC 035 )
The QM transaction control for &1 has not been maintained ( QC 036 )
You cannot scroll in an empty list ( QC 039 )
You have not defined a restriction for the selection ( QC 040 )
Certificate profile &1 &2, version &3, was not changed ( QC 041 )
Layout set &1 cannot be opened ( QC 043 )
No text elements were found for layout set &1 ( QC 044 )
No symbols were found for layout set &1 ( QC 045 )
No long text is available for this certificate profile ( QC 046 )
Position the cursor on a valid item ( QC 047 )
Position the cursor on a valid item ( QC 048 )
Indicate an output strategy in case of a skip ( QC 049 )
Customer order item &1 &2 was not found ( QC 050 )
Condition record &1 was not found ( QC 051 )
Customer order item is not fully specified ( QC 052 )
No object key could be found for material &1 &2, batch &3 ( QC 053 )
No lot was found for cert.profile &1, material &2, batch &3 ( QC 054 )
Entry &1 was not found in the table for the origin of values ( QC 055 )
Entry &1 was not found in the table for skip output strategies ( QC 056 )
Entry &1 was not found in the table for the origin of specifications ( QC 057 )
Entry &1 was not found in the table for the origin of short texts ( QC 058 )
No characteristics were found for inspection lot &1 &2 ( QC 059 )
A batch class is not assigned to batch &1 &2 &3 ( QC 060 )
Internal error during batch classification ( QC 061 )
No characteristics were found for class &1, type &2 ( QC 062 )
No target specifications were found for batch &1 &2 &3 ( QC 063 )
No possible entries can be displayed here ( QC 064 )
Characteristic &1 is used more than once ( QC 065 )
The specifications for charac. &3 were not found in cert.profile &2 ( QC 066 )
No value was found for characteristic &3 in certificate profile &2 ( QC 067 )
No short text was found for characteristic &3 in certificate profile &2 ( QC 068 )
No short text was found for class characteristic &1 ( QC 069 )
The table for the origins of the values is inconsistent ( QC 070 )
The table for the origins of the values is inconsistent ( QC 071 )
No certificate profile was found for object number &1 ( QC 072 )
No data was deleted ( QC 074 )
No version number was entered ( QC 075 )
Desired function not carried out- characteristic inputs have priority ( QC 076 )
Text element &3 is not present in window &2 of layout set &1 ( QC 077 )
Operation &1 cannot be used here ( QC 078 )
Enter a characteristic category for characteristic &1 ( QC 079 )
Enter a value between 1 and 9999 ( QC 080 )
No version was found for profile &1 &2 ( QC 081 )
No released version found for specified selection &1 &2 ( QC 082 )
It may not be possible to print out the certificate ( QC 083 )
Unit &1 cannot be converted to unit &2 ( QC 084 )
No released version was found for characteristic &1 plant &2 ( QC 085 )
The address of sales organization &1 was not found ( QC 086 )
Enter a valid version number ( QC 087 )
Number &1 was already available ( QC 088 )
A result is not possible from batch classification- there is no batch ( QC 089 )
The specifications for characteristic &2 were not found in batch &1 ( QC 090 )
The results for characteristic &2 were not found in batch &1 ( QC 091 )
The short text for characteristic &2 was not found in batch &1 ( QC 092 )
No specifications possible from batch classification- there is no batch ( QC 093 )
Text &2 not available for layout set &1 ( QC 094 )
Standard text &1 cannot be found in language &2 ( QC 095 )
Inspection lot &1 cannot be found ( QC 096 )
Customer &1 cannot be found ( QC 097 )
Supplier &1 cannot be found ( QC 098 )
Contact person &1 cannot be found ( QC 099 )
The certificate was created ( QC 100 )
No master inspection characteristic is assigned to characteristic &1 ( QC 102 )
No class characteristic is assigned to master inspection char. &1 ( QC 103 )
A maximum of 15 decimal places are permitted ( QC 104 )
No change documents were found ( QC 105 )
No data was deleted ( QC 107 )
Material &1 already exists ( QC 108 )
There is no entry for sort number &1 in the list of materials ( QC 110 )
You cannot use the combination of specifications (&1) and results (&2) ( QC 111 )
The links between the characs. and material &1 will also be deleted ( QC 112 )
No values were found for batch &1 &2 &3 ( QC 113 )
The certificate profile was released ( QC 114 )
The certificate profile was blocked ( QC 115 )
The certificate profiles you selected were deleted ( QC 116 )
Not all of the certificate profiles could be blocked ( QC 117 )
No certificate profiles were found that can be deleted ( QC 118 )
Not all characteristics can be transferred (sort number is too large) ( QC 119 )
You do not have authorization to add characteristic &1 &2 &3 ( QC 120 )
No assignments were found for certificate profile &1 &2, version &3 ( QC 121 )
Not all materials can be transferred (sort number too large) ( QC 122 )
Text element &1 does not exist in form &2 ( QC 123 )
The links for the charac. to material no. &1 will also be changed ( QC 125 )
The task list you selected does not contain any characs. ( QC 126 )
The selected task list does not contain any master insp. characs. ( QC 127 )
No characteristic short texts have been created yet ( QC 128 )
The origin of the characteristic short text may not be correct ( QC 129 )
Characteristic type and origin of the specifications are not compatible ( QC 130 )
Characteristic type and origin of values are not compatible ( QC 131 )
The origins of the specifications and values may not be correct ( QC 132 )
Inspection lot &1 does not contain any material ( QC 133 )
Form &1 does not contain all the text elements specified in the characs. ( QC 134 )
Category &1 and origin &2 are not compatible for characteristic &3 ( QC 135 )
The certificate was created, but not archived ( QC 136 )
The error message log was deactivated ( QC 137 )
The data for batch &1 &2 &3 could not be printed ( QC 138 )
Material &1 origin '&2' inspection type '&3' already exists ( QC 139 )
Setting indicator for display by columns ( QC 140 )
Enter the number of columns ( QC 141 )
Original-value recording is not planned for master inspection charac. ( QC 142 )
Text element &1 does not exist in form &2 ( QC 143 )
No classification for material &1 found ( QC 144 )
Material &1: Internal error in material classification ( QC 145 )
No values for characteristic &2 were found in material &1 ( QC 146 )
Maximum number of characteristics reached ( QC 147 )
Text element &1 does not exist in form &2 ( QC 148 )
Certificates are not defined for the Internet release at present ( QC 162 )
Internet Transaction Server not available ( QC 163 )
Internet output: Dispatch time &1 not allowed ( QC 164 )
Internal error occurred in program &2 ( QC 200 )
Version &2 is used instead of version &1 ( QC 201 )
There is already an assignment with this key combination ( QC 202 )
The long text was created in language &1 ( QC 204 )
Logon on through a different application server ( QC 206 )
Enter a language ( QC 207 )
Description &1 is used more than once ( QC 208 )
Description &1 is used more than once ( QC 209 )
The characteristic descriptions used are unique ( QC 210 )
Text elements exist in form &1, check advisable ( QC 224 )
Text elements exist in config. of charac. field &1, check advisable ( QC 225 )
Char. field config. &1 does not contain all text elements used ( QC 226 )
The cert. file size is too great for the selected transmission medium ( QC 301 )
Conversion required from unit &2 to &3 for certificate charac. "&1" ( QC 303 )
The incoming quality certificate could not be stored ( QC 304 )
The status of inspection characteristic "&1" does not allow data transfer ( QC 307 )
Values for insp. charac. "&1" are missing in the electronic certificate ( QC 308 )
Different charac. type from insp. charac. "&1" and cert. charac. "&2" ( QC 309 )
The insp. scope in the certificate for insp. char. "&1" is incorrect ( QC 310 )
No data origin is available for certificate values ( QC 311 )
Unit of measurement for certificate characteristic "&1" cannot be used ( QC 312 )
There is no summarized result for inspection characteristic "&1" ( QC 313 )
There is no sample result for inspection characteristic "&1" ( QC 314 )
There are no original values for inspection characteristic "&1" ( QC 315 )
The attribute code of the certificate charac. "&1" is not identified ( QC 316 )
No certificate record could be created in procurement ( QC 319 )
Incorrect unit of measure of the insp. scope for the cert. char. "&1" ( QC 320 )
Cert. value for inspection charac. "&1" outside plausibility limits ( QC 322 )
Values in certificate must be summarized for inspection charac. "&1" ( QC 323 )
Too few decimal places have been spec. on the cert. for insp. char. "&1" ( QC 324 )
No transfer of cert. data to inspection lot &1 because of insp. points ( QC 325 )
Only the first entry with source "Electronic certificate" is supported ( QC 327 )
No suitable address has been specified for electronic cert. dispatch ( QC 328 )
Recipient address has not been defined in the partner profile ( QC 329 )
Data transfer from the cert. was not planned for the insp. lot char. ( QC 331 )
Data reset. Lot status will not be updated. ( QC 510 )
Check the date of receipt ( QC 512 )
Quality certificate &2 is being processed by &1 ( QC 516 )
Error in workflow - Object: &1 Key: &2 ( QC 517 )
Inspection lot &2 is being processed by &1 ( QC 519 )
Document could not be assigned ( QC 522 )
Invalid certificate type &1 ( QC 600 )
Enter an inspection lot and then select a specification ( QCMS 001 )
No specification could be assigned to the sales document ( QCMS 003 )
Characteristic &1 has no specification for object &2 ( QCMS 005 )
Selection of object (multiple specification) has been deleted ( QCMS 006 )
No logical port in customizing ( QC_INTEGRATION 008 )
Project &1 not in Quality Center ( QC_INTEGRATION 009 )
User &1 is not authorized to access projects ( QC_INTEGRATION 016 )
The communication user is not authorized to transfer data ( QC_INTEGRATION 032 )
Quality Center project &1 is not in domain &2 ( QC_INTEGRATION 034 )
No connection to Quality Center. See long text ( QC_INTEGRATION 036 )
Data transfer error ( QC_INTEGRATION 042 )
Only documents from Quality Standards tab are allowed ( QC_INTEGRATION 050 )
You cannot delete object &1, it is usd by requirement &2 ( QC_INTEGRATION 052 )
QC project &2 (SM project &1) not found ( QC_INTEGRATION 060 )
Unknown exception: SM project &1 <-> QC project &2 (see long text) ( QC_INTEGRATION 061 )
Error transferring application componentsn: QC project &2 ( QC_INTEGRATION 069 )
No user-defined fields. Details in long text ( QC_INTEGRATION 070 )
Service '&1' is not released ( QC_INTEGRATION 103 )
No log. port for proxy class &1 ( QC_INTEGRATION 104 )
Caution: The deselected nodes are removed in Quality Center ( QC_INTEGRATION 110 )
Overflow at sample determination ( QD 003 )
No corresponding sampling procedure was found ( QD 032 )
You cannot use the sampling procedure here ( QD 034 )
There is no manual valuation for sampling procedure & ( QD 036 )
Proposed short text in language & ( QD 070 )
Proposal of all short texts in language & ( QD 071 )
The sampling scheme &1 is incomplete ( QD 092 )
The inspection lot origin is not fully maintained in customizing ( QD 094 )
The dynamic modification criteria are not fully maintained ( QD 095 )
Activation is not allowed, if there is no dynamic mod. level reference ( QD 096 )
You cannot delete sampling type & ( QD 103 )
You cannot use sampling type & because it is blocked ( QD 104 )
No appropriate valuation rule is available ( QD 123 )
Select a valuation rule ( QD 124 )
Only the valuation rule that is already assigned is available ( QD 125 )
You can only select valuation rules for independent multiple sampling ( QD 126 )
You cannot delete valuation mode & ( QD 127 )
You cannot use valuation mode & because it is blocked ( QD 128 )
Do not set any indicators for the sample determination rule & ( QD 143 )
You cannot delete the sample determination rule & ( QD 144 )
You cannot delete the valuation rule & ( QD 146 )
Do not set any indicators for valuation rule & ( QD 147 )
Sample determination rule & cannot be deleted ( QD 149 )
Valuation rule & cannot be deleted ( QD 150 )
Valuation rule & cannot be deleted ( QD 151 )
No dynamic modification level selected ( QD 180 )
Enter the sampling type and the valuation mode ( QD 201 )
No appropriate sample determination rule is available ( QD 205 )
Sampling procedure & is being processed ( QD 206 )
Select a rule for sample determination ( QD 208 )
Only the sample determination rule that is already assigned is available ( QD 209 )
You cannot delete sampling procedure & ( QD 214 )
You can only enter up to four digits after the decimal point ( QD 215 )
If you change the sampling type, data for the sample will be deleted ( QD 217 )
If you change the valuation mode, data for the sample will be deleted ( QD 218 )
For a 100% insp., you cannot have an attributive insp. by no.of defects ( QD 221 )
For a 100% inspection, you cannot have a variable inspection ( QD 222 )
The number of samples cannot be zero ( QD 223 )
Sampling scheme & is not compatible with this sampling procedure ( QD 227 )
The combination inspection severity and AQL is not available ( QD 233 )
You have entered a value greater than 5 for the k factor ( QD 234 )
You cannot enter a k factor greater than 100 ( QD 235 )
You cannot change a sampling procedure with a sampling scheme ( QD 236 )
You cannot delete the procedure- allowed relationships are blocked by & ( QD 237 )
Error when blocking allowed relationships (RC &) ( QD 238 )
The control chart in the sampling method does not match the insp. char. ( QD 240 )
Sampling procedure is not permitted for insp.point-related inspection ( QD 241 )
The sampling procedure can only be used for inspections with insp. points ( QD 242 )
The sampling procedure requires summarized recording and selected sets ( QD 243 )
Valuation mode of the sampling procedure does not match the insp.charac. ( QD 244 )
The control chart is not available in the sampling procedure ( QD 245 )
The sampling procedure is not suitable for SPC characteristics ( QD 246 )
The sampling procedure is only suitable for SPC characteristics ( QD 247 )
There is no suitable sampling procedure ( QD 248 )
The valuation mode & for the sampling procedure is invalid ( QD 250 )
Insp. points require a valuation mode with valuation parameters ( QD 251 )
No suitable sampling scheme was found ( QD 252 )
No sampling procedure found for sample determination ( QD 256 )
Reducing the sample size to the maximum value ( QD 257 )
Only sampling type with sampling scheme allowed ( QD 259 )
Only attributive valuation allowed ( QD 260 )
Sampling proc. &1 is not compatible with char. &2, task list &3, op. &4 ( QD 261 )
The inspection stage number was already assigned ( QD 500 )
Select the inspection stage that you want to process ( QD 501 )
You must enter a number for the inspection stage ( QD 503 )
Either enter an inspection severity or set the skip indicator ( QD 505 )
Only one beginning insp. stage allowed. Indicators will be reset ( QD 506 )
Select one inspection stage as the beginning inspection stage ( QD 507 )
You have not completely maintained the inspection stage change ( QD 509 )
You have not defined inspection stage & yet ( QD 510 )
You have not completely maintained the inspection stage change ( QD 511 )
Dynamic modification rule & is being processed ( QD 514 )
You cannot delete dynamic modification rule & ( QD 518 )
Select the inspection stage that you want to delete ( QD 520 )
No inspection stages were created ( QD 523 )
Any references to the stage you are deleting will also be deleted ( QD 525 )
Any references to the stages you are deleting will also be deleted ( QD 526 )
The new inspection stage & in stage & is not defined yet ( QD 527 )
Dynamic modification rule & has no inspection stages ( QD 541 )
The copied dynamic modification rule & has no inspection stages ( QD 542 )
Deletion is not possible - The allowed relationship is locked by & ( QD 552 )
Error when blocking allowed relationships (RC &) ( QD 553 )
No dynamic modification rule is defined in the inspection plan ( QD 613 )
Inspection stage & corresponds to a skip ( QD 615 )
Operation cannot be processed - quality level is locked ( QD 616 )
There is still an inspection lot to be completed ( QD 621 )
You have not yet completed all inspection lots ( QD 622 )
The quality level is completely deleted with all characteristic records ( QD 629 )
Quality level that should be updated is not available ( QD 701 )
The dynamic modification rule &1 contains only skip stages ( QD 706 )
Missing key fields in the operation when updating the quality level ( QD 708 )
Maximum lot size missing in at least one table of sampling instructions ( QD 816 )
You have entered a value greater than 5 for the k factor ( QD 831 )
You cannot save- no table entries are available ( QD 835 )
The sampling scheme cannot be saved ( QD 836 )
Sampling table exists already ( QD 837 )
Acceptance number &1: '-1' is the only negative value allowed ( QD 838 )
The number of columns with entries varies ( QD 839 )
The valuation parameter for the sampling plan is updated ( QD 842 )
Sampling procedure & has no sampling scheme ( QD 871 )
The entry will not be accepted unless you correct the error ( QD 872 )
You cannot delete the entry ( QD 873 )
Check the rule for sample determination &1 (client &2) ( QD 951 )
Check valuation rule &1 (client &2) ( QD 952 )
Sample determination rules - error while replacing dummy function modules ( QD 953 )
Valuation rules- error while replacing dummy function modules ( QD 954 )
Sample determination rules: dummy function modules successfully replaced ( QD 955 )
Valuation rules: dummy function modules successfully replaced ( QD 956 )
Rule for sample determination &1 (client &2) created ( QD 957 )
Rule for sample determination &1 (client &2) already exists ( QD 958 )
Valuation rule &1 (client &2) created ( QD 959 )
Valuation rule &1 (client &2) already exists ( QD 960 )
Not supported in browser. Please use SAP GUI for Windows or alternative. ( QE 001 )
The characteristic was not selected. Characteristic navigation not poss. ( QE 025 )
The program sets the attribute ( QE 026 )
Attribute is only used for defects in the formula calculation ( QE 027 )
You can only create &1 single values for each characteristic in this view ( QE 028 )
The parameter value for the user parameter &2 is invalid. ( QE 029 )
No further inspection units can be created ( QE 037 )
Results confirmation already exists for insp. unit &1 ( QE 038 )
You have not created any partial samples for the characteristic ( QE 043 )
View for characteristic overview was changed ( QE 044 )
For insp. unit &1 of charac. 2, no catalog confirmation posssible ( QE 047 )
No inspection description can be recorded for insp. unit &1, charac. &2 ( QE 048 )
Insp. unit &1 was not transferred because of defective results ( QE 049 )
No inspection characteristic exists for confirmation no. &1, insp. lot &2 ( QE 078 )
Program cannot be called up directly (include program) ( QE 079 )
The values should have a maximum of &1 decimal places ( QE 080 )
Unplanned characteristic must be a long-term characteristic ( QE 081 )
Function cannot be performed ( QE 082 )
Operation &1 cannot be processed ( QE 083 )
The inspection lot is blocked by user & ( QE 084 )
Process messages exist for operation &1 ( QE 087 )
Results transfer from process interface not possible ( QE 089 )
Results confirmation error. Characteristics cannot be created. ( QE 091 )
The results transaction cannot be used for this inspection ( QE 093 )
The results transaction cannot be used for this inspection ( QE 094 )
The inspection lot is blocked completely ( QE 096 )
No inspection characteristic exists for confirmation no. & ( QE 098 )
Characteristic in skip. Set to status "Being processed" for confirmation ( QE 114 )
No entry for unplanned characteristics in control table TQSS ( QE 115 )
The last operation to be processed has been reached ( QE 116 )
Not all characteristics were selected ( QE 119 )
Characteristic & is an unplanned characteristic ( QE 132 )
Dependent characteristics were loaded for controlling characteristic & ( QE 133 )
Internal error reading calculated characteristic &1 &2 ( QE 135 )
The serial number you entered is not assigned to the inspection lot ( QE 136 )
Formula cannot be evaluated for unplanned characteristics ( QE 140 )
Inspection characteristic & was not read ( QE 141 )
Inspection characteristic must be saved before it can be processed ( QE 142 )
Only completely maintained master inspection characteristics are allowed ( QE 144 )
The list is incomplete ( QE 146 )
You can only create new samples for characteristics IN PROCESS ( QE 156 )
If you enter an * the target value is entered in the offset field ( QE 157 )
You have not yet entered a single value ( QE 158 )
Position the cursor on a valid table line ( QE 168 )
The inspection unit number or serial number you entered already exists ( QE 174 )
The number of nonconforming units is 0 ( QE 176 )
The number of nonconforming units is not 0 ( QE 177 )
Only enter the reference for one document ( QE 178 )
Internal error generating defect record ( QE 179 )
Characteristic results cannot be recorded for inspection lot & ( QE 181 )
Results cannot be recorded ( QE 182 )
You have reached the first operation to be processed ( QE 183 )
Characteristic &1 was not found ( QE 184 )
A long text still exists for the insp. description ( QE 185 )
For charac. &1, first line of long text in the insp. description is empty ( QE 186 )
For single value &1, first line of long text in insp. descr. is empty ( QE 187 )
For class &1, first line of long text in inspection description is empty ( QE 188 )
For sample &1, first line of long text in insp. description is empty ( QE 189 )
No characteristics were found ( QE 214 )
Function module for charac. &1 with valuation rule &2 does not exist ( QE 278 )
Conversion factor for sample UoM & not maintained for charac. & & ( QE 300 )
The operation control key does not specify any inspection characteristics ( QE 306 )
Maximum number of samples is already reached ( QE 321 )
The partial samples have not been created yet ( QE 336 )
No authorization for this function ( QE 337 )
Characteristic/Sample must be processed before it can be valuated ( QE 350 )
The attribute is invalid- the selected function is not supported ( QE 358 )
The function could not be carried out ( QE 369 )
& linked characteristic(s) have yet to be closed ( QE 387 )
The input value must be between 0 and 1 ( QE 400 )
The number of nonconforming units is greater than the inspection scope ( QE 401 )
The required inspection scope has been reached ( QE 402 )
The inspected sample size does not correspond to the required insp. scope ( QE 403 )
The input value & is too large. Check your entry ( QE 405 )
The mean value is outside the tolerance range ( QE 412 )
All individual values are outside the tolerance range ( QE 413 )
The value you have entered is too high. Check your entry ( QE 415 )
The use of partial samples is not supported for this characteristic ( QE 416 )
You have not yet created partial samples for characteristic &1 &2 &3 ( QE 420 )
Sample &1 does not exist in characteristic &2 &3 &4 ( QE 421 )
Single values or classes are not allowed for characteristic &1 &2 &3 ( QE 422 )
The valuation is incorrect. Setting the attribute to invalid. ( QE 424 )
Further samples are required ( QE 425 )
For charac. &1 &2 &3 single values can only be recorded for samples ( QE 426 )
No partial samples defined for characteristic &1 &2 &3 ( QE 427 )
The minimum value is greater than the mean value ( QE 438 )
The maximium value is smaller than the mean value ( QE 439 )
The minimum value is greater than the maximum value ( QE 440 )
The number of inspected sample units is being corrected ( QE 441 )
The valuation of the inspection result has the invalid value &1. ( QE 443 )
The statistics for the characteristic (sample) were reset ( QE 461 )
Error in memory management of QM results recording ( QE 478 )
The entry cannot be deleted (mark it as invalid) ( QE 479 )
You cannot delete the entry here ( QE 481 )
Characteristics are only closed once the signature process is complete ( QE 483 )
A selected characteristic is already in a signature process ( QE 485 )
You cannot use characteristic filter &1 for this function ( QE 508 )
An initial value is not possible for the mean value (& valid values) ( QE 559 )
No printout required or no print information available ( QE 578 )
Check value & for the standard deviation ( QE 604 )
You have confirmed numbers for an open marginal class ( QE 608 )
The number of valid values is 0 ( QE 610 )
Value $ of a number field is not meaningful ( QE 611 )
Error in function module $ ( QE 612 )
The inspection characteristic does not have a tolerance range ( QE 613 )
No mean value available for the measured values ( QE 614 )
No standard deviation available for the measured values ( QE 615 )
No entries found ( QE 651 )
This line cannot be selected ( QE 690 )
Control chart type &1 not allowed ( QE 701 )
No control chart type found ( QE 702 )
No SPC criterion found ( QE 703 )
Control chart type &1 does not exist ( QE 704 )
SPC criterion &1 does not exist ( QE 705 )
Control chart blocked by &1 ( QE 706 )
SPC criterion &1 cannot be used ( QE 707 )
Track &2 for control chart type &1 does not exist ( QE 708 )
Control chart &1 does not exist ( QE 709 )
Track &2 for control chart &1 does not exist ( QE 710 )
Inspection results are not complete ( QE 712 )
Unexpected error occurred when the test was called ( QE 713 )
There are still graphics windows open ( QE 714 )
SPC criterion and characteristic cannot be combined ( QE 715 )
Track &1 of the control chart does not contain any data ( QE 716 )
Control limits for track &1 could not be calculated ( QE 717 )
The SPC characteristic indicator is reset ( QE 718 )
The function is not supported ( QE 719 )
There is insufficient data available ( QE 720 )
There is not enough data to create a histogram ( QE 721 )
The data for the histogram is inconsistent ( QE 722 )
A histogram cannot be displayed for characteristic &1 ( QE 723 )
Internal error in control chart &1 ( QE 724 )
Data for printing a run-chart is missing ( QE 730 )
Data for the run-chart is inconsistent ( QE 731 )
No run-chart can be displayed for characteristic &1 ( QE 732 )
No QM STI evaluation can be carried out for characteristic &1 ( QE 733 )
No data could be exported ( QE 740 )
First exit the current results processing session ( QE 750 )
Inconsistencies in control chart &1 prevent valuation ( QE 760 )
System determines start of inspection ( QE 761 )
Automatic defects recording not possible for char. &1 in operation &2 ( QECOPY 025 )
Not all allocations were created ( QEHH 004 )
No allocations were created ( QEHH 005 )
Allocations have not been completely created ( QEHH 006 )
Please maintain the application (inspection lot &1 operation &2) ( QEHH 007 )
Maintain the inspector (inspection lot &1 operation &2) ( QEHH 008 )
Incorrect or incomplete allocations exist ( QEHH 009 )
Application &1 is not available ( QEHH 011 )
Text for application &1 is not available in language &2 ( QEHH 012 )
Allocation for inspection lot &1 already exists ( QEHH 015 )
Application &1 not suitable for allocation (insp. lot &2 operation &3) ( QEHH 016 )
Incorrect status "&1" for allocation (inspection lot &3 operation &4) ( QEHH 017 )
Enter a mobile application ( QEHH 019 )
Data for allocation (inspection lot &1 operation &2) was not saved ( QEHH 024 )
Enter a status (inspection lot &1 operation &2) ( QEHH 025 )
Position the cursor on a results field ( QETB 013 )
Cursor is incorrectly positioned (inspection point identification) ( QETB 014 )
Scrolling is not possible ( QETB 020 )
You cannot record characteristic results for inspection lot & ( QETB 024 )
You cannot process this charac. with this transaction. ( QETB 025 )
You cannot use this function in the entry line for new inspection points ( QETB 034 )
Defects can only be recorded at the lot level for the current insp.lot ( QF 008 )
Defects cannot be recorded for the characteristic ( QF 009 )
No catalog profile maintained for report type & ( QF 015 )
No report category could be determined automatically ( QF 019 )
Function is not possible for completed item(s) ( QF 028 )
Updating selections ( QF 029 )
Function is not possible for item(s) that have not yet been activated ( QF 032 )
Serial number & cannot be used in inspection lot & ( QF 034 )
No serial numbers have been created for inspection lot &, material & ( QF 038 )
You cannot delete closed items ( QF 041 )
Function is not possible for item(s) that have already been activated ( QF 043 )
The notificiation types for the marked items are not identical ( QF 044 )
No quality notification type has been defined for inspection type & ( QF 048 )
This line cannot be selected ( QF 050 )
List contains defect records that are not yet saved ( QF 051 )
Automatic assignment of report category to work center is not possible ( QF 052 )
No notifications have been created for the selected defect records ( QF 057 )
Only notifications for posted defect records can be displayed ( QF 058 )
Entries generated by valuation cannot be deleted manually ( QF 059 )
New defect item(s) activated automatically ( QF 064 )
Marked defect item(s) activated ( QF 065 )
Defect items were automatically activated ( QF 068 )
Quality notification was activated automatically using defect class ( QF 071 )
Function is not possible for item(s) that have already been activated ( QF 072 )
Defect item & is already completed- only display is possible ( QF 073 )
Defects recording w/o reference to an insp. point ( QF 080 )
You cannot delete the defects assigned to an insp. point or sample ( QF 081 )
You can only display the defects assigned to an insp. point ( QF 082 )
Defect & & could not be generated ( QF 083 )
Item '&' cannot be deleted, tasks were created ( QF 084 )
Inspection lot & could not be found ( QF 085 )
A quality notification is created for the inspection lot ( QF 091 )
The current defect was recorded using report type & ( QF 122 )
Completed notification set in process due to new item(s) ( QF 123 )
Serial no. &3 already exists for confirmation no. &1, item no. &2 ( QF 149 )
You cannot change the serial number since long texts were entered ( QF 150 )
You can only use the function for newly created serial nos. after saving ( QF 151 )
Changing the object list for the insp. lot can affect defects recording ( QF 153 )
You can no longer change the object list for the serial number ( QF 154 )
Serial number &1 can no longer be changed ( QF 155 )
Value & of item number & is not unique ( QF 173 )
You cannot record results for insp. lot & ( QF 201 )
Reference data for inspection lot was added to newly created item(s) ( QF 202 )
Not all items for inspection lot & can be processed ( QF 203 )
You cannot generate defect records automatically for notification type & ( QF 220 )
No inspection lot found ( QG 101 )
The print dialog was discontinued ( QG 151 )
Device type invalid ( QG 152 )
The layout set is not available ( QG 153 )
The print options are invalid ( QG 154 )
Another layout set is still open ( QG 155 )
The layout set printout is not open ( QG 156 )
The printout has been successfully completed ( QG 157 )
Impermissible page format ( QG 158 )
No form opened yet ( QG 159 )
Text element does not exist ( QG 160 )
The function is not valid ( QG 161 )
The window section is invalid ( QG 162 )
Window does not exist ( QG 163 )
No lots found for the selection criteria ( QG 164 )
No inspection operations selected for &1 lot(s) ( QG 165 )
Standard form will not be used for printout ( QG 166 )
Limit your selection ( QG 167 )
No partial lots have been selected for &1 lots ( QG 168 )
Check your entries ( QG 169 )
Printing from the print view was canceled ( QG 170 )
Internal program error in string comparison ( QG 171 )
Status records were recovered ( QG 173 )
Archive data (status record for inspection lots) incomplete ( QG 174 )
Insufficient data given in parameter ( QG 201 )
'From' date is after 'To' date ( QG 202 )
No data found using the selection criteria ( QG 203 )
No information available for material ( QG 204 )
No information available for the inspection plan or routing ( QG 205 )
No information exists for the inspection or work operation ( QG 206 )
Internal program error ( QG 207 )
Results history does not exist ( QG 208 )
No row selected ( QG 211 )
No single results exist ( QG 212 )
Error in exporting the single values ( QG 213 )
Error during call up of graphics ( QG 214 )
Select only one entry ( QG 215 )
Results history for insp. lot origin 14 (Plant Maintenance) not available ( QG 216 )
Internal program error when accessing an internal table ( QG 217 )
The task list does not contain suitable characteristics ( QG 301 )
Processing was terminated ( QG 302 )
Function could only be partially performed ( QG 306 )
The task list does not contain any characs. ( QG 311 )
Processing was terminated ( QG 312 )
No insp. results were found ( QG 313 )
Enter a reference object ( QG 314 )
No quality score class assigned to the information structure & ( QG 702 )
Company code for plant & could not be determined ( QG 703 )
The statistics update was not carried out ( QG 707 )
The selected analysis does not use quality score classes ( QG 716 )
The list is incomplete- & inspection lot(s) missing ( QG 717 )
The list has & inspection lots more than were used for the analysis ( QG 718 )
No inspection lots exist for the summarized data of the analysis ( QG 720 )
No data base table found for info structure & ( QG 721 )
No assignment possible to info structure & ( QG 722 )
Internal error when posting inspection lots- inconsistent data in QMIS ( QG 725 )
Entries in the inspection lot file are already blocked ( QG 726 )
You cannot display the master data ( QG 729 )
No time reference for insp.lot/notif.list with posting period periodicity ( QG 731 )
Internal error- statistics were not updated ( QG 732 )
The lead time for inspection lot & is negative and has been reset to zero ( QG 733 )
Internal error during rebuild- event & ( QG 735 )
The document data in the QM module is inconsistent ( QG 736 )
Logging of statistics update has been turned on (Performance) ( QG 737 )
Some notification data entries are already blocked ( QG 738 )
The unit of measurement for the lead time could not be determined ( QG 739 )
The list is incomplete- & notification(s) are missing ( QG 740 )
The list contains & notification(s) more than the analysis ( QG 741 )
No notifications were found for the summarized analysis data ( QG 742 )
The reorganization only summarizes info structures assigned to QMIS ( QG 743 )
Material & could not be converted from unit & to unit & ( QG 747 )
Code group cannot be used to restrict the hit list ( QG 748 )
The list display could not be limited with drill-down criterion & ( QG 751 )
Data, info structure & version & exist, data inconsistency ( QG 754 )
Info structure & not active or no update due to application 05 ( QG 755 )
The selected function is not supported on the hierarchy lists ( QG 760 )
Info structure & is not defined for the QM component ( QG 761 )
No QM update is necessary for info structure & ( QG 762 )
Statistic update for inspection results is switched off ( QG 765 )
No update group is defined for info structure & ( QG 766 )
The current process model will not be copied ( QG 781 )
Error when opening the archive file ( QG 801 )
Checksum error when reading the archive ( QG 802 )
I/O error when reading the archive ( QG 803 )
You cannot select clients for archiving ( QG 804 )
The client you require is not available ( QG 805 )
Access denied, selection criteria are being corrected ( QG 806 )
No archive file selectable/selected ( QG 807 )
Archiving object QM_CONTROL has not been created ( QG 808 )
Internal error during archiving ( QG 809 )
Check your entry. Searching for batches without partial lots. ( QG 811 )
The selection is limited to &1 inspection lots ( QG 812 )
Error during parse of the graphic settings in line &1, column &2 ( QG_EVAL 002 )
Selection &1 not defined for data type &2 ( QG_EVAL 004 )
Data record &1 of structure &2 could not be assigned ( QG_EVAL 010 )
The structure of data &1 is not suitable for implementation type &2 ( QG_EVAL 013 )
Current layout settings will be lost during selection ( QG_EVAL 026 )
The total quantity & must be posted completely for HU lots ( QHU 002 )
You cannot assign the chosen handling unit to the material sample ( QHU 003 )
No handling unit was assigned to & samples ( QHU 004 )
No handling units were assigned ( QHU 005 )
The handling unit &1 is assigned to delivery &2 and cannot be processed ( QHU 006 )
You cannot post stock in transit as a return to the supplier ( QHU 007 )
You cannot transfer stock to an HU-managed storage location ( QHU 008 )
You cannot have a single-unit inspection and HU inspection lots ( QHU 009 )
Check for handling unit does not allow all types of lot grouping ( QHU 018 )
Inspection lot table for status update is empty ( QI 015 )
A valuation was executed, although no indicators are set ( QI 020 )
You have no authorization to delete the application log for QM Interfaces ( QI 021 )
No communication destination maintained for subsystem & ( QI 080 )
No entry found in subsystem table for & ( QI 081 )
Table structure & too long for transfer ( QI 082 )
An invalid data type has been used in table structure & ( QI 083 )
Error creating a receiver file ( QI 084 )
Insufficient main storage available ( QI 085 )
Error creating the interchange files ( QI 087 )
Interchange files are already present in the target system ( QI 088 )
Incorrect record type for results recording for confirmation number & ( QI 101 )
Field & in record for confirmation number & contains incorrect characters ( QI 102 )
Characteristic with confirmation number & is already blocked ( QI 104 )
Characteristic with confirmation number & is not available ( QI 105 )
Characteristic lot with confirmation no. & not available ( QI 106 )
Operation for characteristic with confirmation no. & not available ( QI 107 )
Sample & for characteristic with confirmation no. & not available ( QI 108 )
Valuation module for confirmation no. & not available ( QI 109 )
No serial number indicated for confirmation number & ( QI 110 )
Error while changing status for characteristic w/confirmation no. & ( QI 111 )
Incomplete record for confirmation no. & : no measured value indicated ( QI 112 )
Incomplete record for confirmation no. & : no code indicated ( QI 113 )
Incomplete record for confirmation no. & : no valuation indicated ( QI 114 )
Record error for confirmation no. & : code & for codeGrp & not available ( QI 115 )
Record type &1 does not match confirmation of characteristic &2 ( QI 116 )
Single result &1 for characteristic w/confirmation no. &2 not available ( QI 117 )
Characteristic w/ confirmation no. & could not be closed ( QI 118 )
Characteristic w/ confirmation no. & could not be valuated ( QI 119 )
Sample &1 for characteristic with confirmation no. &2 is not closed ( QI 120 )
Sample &1 for characteristic w/confirmation no. & could not be valuated ( QI 121 )
Defect class &1 of characteristic w/confirmation no. & not defined ( QI 122 )
Valuation &1 of characteristic for confirmation no. &2 not allowed ( QI 123 )
Defect class &1 of characteristic w/confirmation no. &2 not defined ( QI 124 )
Valuation &1 for sample &2 and confirmation no. &3 is not allowed ( QI 125 )
Defect class &1 for sample &2 and confirmation no. &3 not defined ( QI 126 )
Sample &1 for characteristic w/confirmation no. &2 is not valid ( QI 127 )
Sample &1 for characteristic with inspection charac. &2 was not specified ( QI 128 )
No samples are permitted for characteristic w/confirmation no. & ( QI 129 )
Confirmation for characteristic & not allowed in view of inspLot status ( QI 130 )
No authorization for insp. type or material for insp. characteristic &1 ( QI 131 )
No operation authorization for characteristic with confirmation no. &1 ( QI 132 )
Single value &1 was not copied for confirmation number &2 ( QI 139 )
Incorrect record type for results recording for confirm. no. &1 lot &2 ( QI 301 )
Field &1 in record for confirm. no. &2, lot &3 contains incorrect chars ( QI 302 )
Characteristic with confirmation number &1 (lot &2) is already blocked ( QI 304 )
Characteristic with confirmation number &1 (lot &2) is not available ( QI 305 )
Characteristic lot with confirmation no. &1 (lot &2) not available ( QI 306 )
Operation for charc with confirmation no. &1 (lot &2) not available ( QI 307 )
Sample &1 for charc with confirmation no. &2 (lot &3) not available ( QI 308 )
Valuation module for confirmation no. &1 (lot &2) not available ( QI 309 )
No serial number entered for confirmation number &1 (lot &2) ( QI 310 )
Error when changing status for charc with confirmation no. &1 (lot &2) ( QI 311 )
Incomplete record for confirm. no. &1 (lot &2): no measured value entered ( QI 312 )
Incomplete record for confirmation no. &1 (lot &2): no code entered ( QI 313 )
Incomplete record for confirmation no. &1 (lot &2): no valuation entered ( QI 314 )
Single result &1 for charc with confirm. no. &2 (lot &3) not available ( QI 317 )
Characteristic with confirmation no. &1 (lot &2) could not be closed ( QI 318 )
Characteristic with confirmation no. &1 (lot &2) could not be valuated ( QI 319 )
Sample &1 for characteristic (confirmation no. &2, lot &3) is not closed ( QI 320 )
Sample &1 for charc (confirmation no. &2, lot &3) could not be valuated ( QI 321 )
Defect class &1 of charc with confirmation no. &2 (lot &3) not defined ( QI 322 )
Valuation &1 of charc for confirmation no. &2 (lot &3) not allowed ( QI 323 )
Defect class &1 of charc with confirmation no. &2 (lot &3) not defined ( QI 324 )
Valuation &1 for sample &2 confirmation no. &3 (lot &4) is not allowed ( QI 325 )
Defect class &1 for sample &2 confirmation no. &3 (lot &4) not defined ( QI 326 )
Sample &1 for characteristic w/ confirmation no. &2 (lot &3) is not valid ( QI 327 )
No samples are permitted for charc with confirmation no. &1 (lot &2) ( QI 329 )
No operation authorization f. characteristic (confirmation no. &1 lot &2) ( QI 332 )
Single value &1 was not copied for confirmation number &2 (lot &3) ( QI 339 )
Number range for findings does not exist ( QIE_COMMON 008 )
Table &1 does not contain insp. object type &2 &3 &4 in the source system ( QIE_COMMON 011 )
Table &1: Error during sample-drawing procedure &2 in the source system ( QIE_COMMON 012 )
Table &1: Error in sample-drawing unit &2 from the source system ( QIE_COMMON 013 )
Table &1: Error in sample-drawing instruction &2 from the source system ( QIE_COMMON 014 )
Table &1: Error in inspection rule with GUID &2 from the source system ( QIE_COMMON 015 )
Error when using catalog &1 ( QIE_COMMON 018 )
Object to be changed is currently being processed by another user ( QIE_COMMON 019 )
Search criteria are too extensive ( QIE_COMMON 021 )
Acceptance and rejection numbers will be initialized ( QIE_CUSTOMIZING_UI 002 )
Document Service Provider (Element Type ID) &1 is invalid ( QIE_CUSTOMIZING_UI 003 )
No insp. stage selected as starting point; insp. stage &1 will be used ( QIE_CUSTOMIZING_UI 023 )
Index &1 &2 &3 &4 is flagged for deletion; perform an update ( QIE_CUSTOMIZING_UI 030 )
Execute an update report to activate changed indexes ( QIE_CUSTOMIZING_UI 031 )
Index &1 &2 &3 &4 will not be created ( QIE_CUSTOMIZING_UI 032 )
Index contains too many properties; only the first 10 are considered ( QIE_CUSTOMIZING_UI 033 )
Index will not be created; property position numbers contain gaps ( QIE_CUSTOMIZING_UI 034 )
Not possible to change index &1 &2 &3 &4 ( QIE_CUSTOMIZING_UI 035 )
Index &1 &2 &3 &4 is not active ( QIE_CUSTOMIZING_UI 036 )
Index &1 &2 &3 &4 is locked ( QIE_CUSTOMIZING_UI 037 )
No number range specified in Customizing for sample/item type & ( QIE_ELEMENT 014 )
Assignment is not possible; parent object is not an inspection document ( QIE_ELEMENT 015 )
Specify the entity type of the parent object ( QIE_ELEMENT 016 )
Property &1 is not allowed for sample or item type &2 ( QIE_ELEMENT 018 )
Decision code &1 is not allowed for decision code group &2 ( QIE_ELEMENT 019 )
Sanmple assignment is not allowed for sample of subcategory &1 ( QIE_ELEMENT 020 )
No insp. doc. found for sample &1; sample is not assigned to an insp. doc ( QIE_ELEMENT 022 )
Inspection document for sample &1 could not be read ( QIE_ELEMENT 023 )
Attribute &2 was not set to &3 for sample or item &1 ( QIE_ELEMENT 024 )
Inspection document &1 does not allow the creation of samples ( QIE_ELEMENT 026 )
Decision cannot be made; decision for inspection document &1 already made ( QIE_ELEMENT 027 )
Value &1 of property &2 contains inadmissable special characters ( QIE_ELEMENT 034 )
Sample/item &1 cannot be indexed because of inconsistent data ( QIE_ELEMENT 043 )
Document attachments of sample or item &1 were changed ( QIE_ELEMENT 046 )
Finding type &1 could not be determined ( QIE_FINDING 006 )
Data missing for directly superordinate obj. (insp. document or element) ( QIE_FINDING 007 )
Adapter class &2 assigned to catalog &1 has incorrect interface ( QIE_FINDING 013 )
Catalog &1 was not assigned to finding type &2 in Customizing ( QIE_FINDING 014 )
Document attachments of finding &1 were changed ( QIE_FINDING 046 )
Inspection &1 will be performed without dynamic modification ( QIE_INSP_DOCUMENT 006 )
Decision code &1 is not allowed for decision code group &2 ( QIE_INSP_DOCUMENT 019 )
Sample or item &1 is already locked ( QIE_INSP_DOCUMENT 020 )
Lot size cannot be changed; external inspection has started ( QIE_INSP_DOCUMENT 021 )
Inspection document not canceled; external inspection has started ( QIE_INSP_DOCUMENT 022 )
Sample generation not possible; sample-drawing procedure &1 is locked ( QIE_INSP_DOCUMENT 030 )
No inspection rule arguments exist for inspection document &1 ( QIE_INSP_DOCUMENT 031 )
A sample was created; settings for sample drawing are inconsistent ( QIE_INSP_DOCUMENT 032 )
Primary sample was created, because lot size is equal to sample size ( QIE_INSP_DOCUMENT 033 )
Primary sample was created, because sample size is greater than lot size ( QIE_INSP_DOCUMENT 034 )
Primary sample was created; error in quantity conversion ( QIE_INSP_DOCUMENT 035 )
Quantity specifications copied from the sample-drawing ( QIE_INSP_DOCUMENT 036 )
Search not possible; no unique inspection object type was specified ( QIE_INSP_DOCUMENT 039 )
Property &1 is not allowed for inspection object type ( QIE_INSP_DOCUMENT 041 )
Value &1 of property &2 contains inadmissable special characters ( QIE_INSP_DOCUMENT 042 )
Finding &1 is already locked ( QIE_INSP_DOCUMENT 043 )
Document attachments of inspection document &1 were changed ( QIE_INSP_DOCUMENT 046 )
Primary sample created as sample-drawing instructions are inconsistent ( QIE_INSP_DOCUMENT 047 )
Decision for inspection document &1 reset; quality level not corrected ( QIE_QUALITY_LEVEL 002 )
Inspection stage may be incorrect, due to reset inspection decision ( QIE_QUALITY_LEVEL 003 )
Inspection document &1 cancelled; quality level not corrected ( QIE_QUALITY_LEVEL 004 )
Inspection stage may be incorrect, due to cancelled inspection document ( QIE_QUALITY_LEVEL 005 )
Tightening of inspection not possible, no setting made for rejection case ( QIE_QUALITY_LEVEL 015 )
Deletion of quality level is not possible ( QIE_QUALITY_LEVEL 017 )
Interval must be specified when creating sample-drawing unit of type &1 ( QIE_SAMP_DRWP 014 )
Sample-drawing unit for type &1 cannot be created with interval spec. ( QIE_SAMP_DRWP 015 )
Not possible to create sample-drawing unit for type &1 ( QIE_SAMP_DRWP 016 )
Sample-drawing unit &1 &2 conflicts with type of sample drawing &3 ( QIE_SAMP_DRWP 017 )
Sample category &1 not permitted for sample-drawing instruction ( QIE_SAMP_DRWP 018 )
Impermissible data for samp.-drawing instructn of type "Fixed No. Samps" ( QIE_SAMP_DRWP 021 )
Impermissible data for sample-drawing instruction of type "Individual" ( QIE_SAMP_DRWP 022 )
Impermissible data for sample-drawing instr. of type "Sampling Scheme" ( QIE_SAMP_DRWP 023 )
Type &1 of the sample-drawing instruction is not permitted ( QIE_SAMP_DRWP 025 )
Sample or item type &1 is not permitted ( QIE_SAMP_DRWP 026 )
Specify a measurement unit for the sample-drawing unit for the type &1 ( QIE_SAMP_DRWP 028 )
Sample quantity &1 not permitted for sample-drawing instr. of category &2 ( QIE_SAMP_DRWP 031 )
Sample qty unit &1 not permitted for sample-drawing instr. of category &2 ( QIE_SAMP_DRWP 033 )
Sample quantity specified without unit of measurement ( QIE_SAMP_DRWP 034 )
Property &1 cannot be used for inspection rules ( QIE_SETUP 029 )
Technical name of property &1 contains impermissible special characters ( QIE_SETUP 035 )
Specify a sample type for the specified sample-drawing procedure ( QIE_SETUP 042 )
Insp. severity &1 from dyn.mod.rule &2 does not exist in samp. scheme &3 ( QIE_SETUP 050 )
Arguments specified for sample type 1 are not suitable for sample type &1 ( QIE_SETUP 051 )
Arguments specified for sample type 2 are not suitable for sample type &1 ( QIE_SETUP 052 )
Arguments specified for sample type 3 are not suitable for sample type &1 ( QIE_SETUP 053 )
Rule specified for sample determination not suitable for sample type &1 ( QIE_SETUP 054 )
Sample-drawing unit overridden by container type in sample-drawing proc. ( QIE_SETUP 055 )
Sample-drawing procedure of type BAdI does not contain sample-draw. unit ( QIE_SETUP 056 )
No automatic release of samples despite external system being specified ( QIE_SETUP 057 )
Conversion of parameter '&1' for input processing not possible ( QINPPROC 001 )
You can only process characteristics during data entry in web with form ( QISR 002 )
Internet service &1 may be used a maximum of one more time ( QISR 003 )
You can only process the template once you have saved scenario &1 ( QISR 004 )
Account assignment object was deleted as the controlling area was changed ( QISR 005 )
Field name &1 cannot be used, as &1 is in the incorrect namespace ( QISR 006 )
&1 is not a data element, nor is it a structure ( QISR 007 )
Structure &1 contains a field from the "Table type" category (TTYP) ( QISR 008 )
Partner role must be of type "user" ( QISR 009 )
You cannot delete scenario &1 as messages still exist ( QISR 010 )
The scenario still has characteristics ( QISR 011 )
Structure &1 contains a field called &2 ( QISR 012 )
Field &1 has already been used ( QISR 013 )
Structure &1 contains field &2, which is also in structure &4 ( QISR 014 )
Structure &1 already contains field &2 (field name &3) ( QISR 015 )
You need to enter the partner role when specifying a processor ( QISR 017 )
You can enter either the standard role, or the person responsible ( QISR 018 )
Enter one account assignment only ( QISR 019 )
Subtemplates for ISR must begin with "ISR_", and have 10 characters ( QISR 020 )
Subtemplate &1 is used more than once in the template ( QISR 021 )
You need to save scenarion &1 before you can test it ( QISR 022 )
Company code was changed from &1 to &2 ( QISR 023 )
Internet service &1 does not exist ( QISR 024 )
Cost variant &1 is not allowed ( QISR 025 )
Subtemplate &1 is not allowed ( QISR 026 )
Assign a cost center, an order, or a WBS element ( QISR 027 )
The contact person must be an SAP user ( QISR 028 )
Notification type &1 does not include partner role ( QISR 029 )
The key is not valid in notification type &1 ( QISR 030 )
Either enter estimated costs or a template ( QISR 031 )
The processor found cannot be transferred to the task ( QISR 032 )
Field &1 cannot be used in the template ( QISR 033 )
Field &1 cannot be used in the template ( QISR 034 )
The name of field &1 will be truncated during generation of the form ( QISR 035 )
The Adobe form &1 does not yet exist ( QISR 408 )
The Adobe form &1 cannot be generated ( QISR 412 )
The selected validity period is not correct ( QISR 415 )
No server can be entered for input type & ( QISR 418 )
Message type &1 does not exist ( QISR 501 )
You can only set one status ( QISR 502 )
The status was not changed ( QISR 503 )
Notification number is missing from the interface of a function module ( QISR 504 )
Error occurred during costing ( QISR 505 )
List of the job processors not yet fully generated ( QISR 506 )
Role & cannot be used ( QISR 613 )
Assign a user to role & ( QISR 614 )
ISR scenario & has more than one default entry ( QISR_MPO 101 )
ISR scenario & has no default entry ( QISR_MPO 102 )
Service type &: activity type & does not have the correct category ( QISR_MPO 103 )
Enter a quantity for service type & ( QISR_MPO 109 )
Posting for notification & could not be executed ( QISR_MPO 111 )
No scenario is entered for use &1 ( QISR_PCR 001 )
Position the cursor on a document line ( QISR_PCR 002 )
Object &1 is not defined for multiple specifications ( QLMS 001 )
Object type & is not defined for multiple specification ( QLMS 002 )
Internal Error ( QLMS 003 )
Error when reading objects for inspection lot &1 ( QLMS 004 )
Error when converting units ( QLMS 010 )
Multiple specifications are only permitted for inspection acc. to plan ( QLMS 015 )
Error when reading specifications for the multiple specification ( QLMS 026 )
Object(s) of multiple specification for inspection lot & rejected ( QLMS 050 )
Form &1 is not suitable for the output of multiple specifications ( QLMS 060 )
In internal table &1, entry &2 &3 &4 is missing ( QLMS 100 )
Object type &1 is not defined in Customizing ( QLMS 101 )
Not possible to determine communication technology ( QL_COMMUNICATION 062 )
Material &1 for plant &2 not maintained ( QM 004 )
Material &1 does not exist - check your entries ( QM 005 )
No screen number defined for initial screen for notification type &1 ( QM 006 )
Screen &1 for program &2 does not exist ( QM 007 )
Enter both material document number and item ( QM 008 )
Enter both purchasing document number and item ( QM 009 )
The combination of material document/purchasing document is not allowed ( QM 010 )
Copy data from material document &1 to notification ( QM 011 )
Copy data from purchasing document &1 to notification ( QM 012 )
Enter both order number and order item ( QM 013 )
You cannot create an order for notification type &1 and plant &2 ( QM 014 )
You must specify a plant when you create an order ( QM 015 )
There is no user exit available for function code &1 ( QM 017 )
Data transfer to the notification from sales order &1 ( QM 018 )
Enter both the order number and operation ( QM 019 )
The combination of sales order and delivery is not allowed ( QM 020 )
Enter both the delivery number and delivery item ( QM 021 )
Item number &2 does not exist for delivery &1 ( QM 022 )
Delivery &1 does not exist ( QM 023 )
Data transfer to notification from delivery &1 ( QM 024 )
If there is no item number, create the customer complaint for entire del. ( QM 025 )
Data transfer to notification from order &1 &2 ( QM 026 )
Operation &2 does not exist for order &1 in routing &3 ( QM 027 )
Enter a production order or a production version ( QM 028 )
Data copied to notification from production version ( QM 029 )
Material is maintained with revision level ( QM 030 )
You cannot use the current notification as a copy model ( QM 031 )
Sample &1 does not match inspection lot &2 ( QM 038 )
Sample &1 does not match material &2 and batch &3 ( QM 039 )
Sample &1 does not match material &2 ( QM 040 )
Enter both the delivery and item ( QM 041 )
Order parameter you changed is only effective in current processing ( QM 046 )
The item number &1 you entered is not the main item ( QM 053 )
Production version &1 for plant &2 and material &3 does not exist ( QM 056 )
Production version is only uniquely identified with material and plant ( QM 057 )
Production version is not defined for repetitive manufacturing ( QM 058 )
Material change: Adjust the quantity if necessary! ( QM 059 )
Operation &2 for order &1 is not unique ( QM 060 )
Sequence &1 for operation &2 does not exist in routing &3 ( QM 061 )
Sys. error during call up of funct. module QM08_numbers_of_notifications ( QM 107 )
Notification type &1 does not match specified notif. &2 ( QM 109 )
You cannot make a selection based on customer and vendor ( QM 113 )
Entries in the notif. list differ from the default values ( QM 114 )
Notification no. &1 could not be read ( QM 115 )
Order type &1 does not have the sales doc. identifier "repair" ( QM 127 )
The repair order could not be created ( QM 133 )
You must enter a service product for order type &1 ( QM 135 )
This follow-up function cannot be executed ( QM 139 )
There is no Internet mail address entered in your user master ( QM 140 )
Inspection lot exists - follow-up function cannot be performed ( QM 141 )
No repair order exists - follow-up function cannot be performed ( QM 142 )
Entry for transfer posting to blocked stock is not defined ( QM 143 )
Entry for transfer posting to scrap is not defined ( QM 144 )
Standard form will not be used for printout ( QM 147 )
Check the number of the purchasing document/purchasing item ( QM 151 )
Check the item number of the purchasing document ( QM 152 )
Could not create return delivery ( QM 153 )
Return delivery &1 will be created after saving the notification. ( QM 154 )
No suitable purchasing document could be assigned ( QM 155 )
Transfer order & will be created after saving the notification ( QM 156 )
An inspection lot already exists for the notification ( QM 157 )
No inspection lot is assigned to the notification ( QM 158 )
Usage decision for the inspection lot was already made ( QM 160 )
Material will be posted to inspection stock after saving the notification ( QM 161 )
No inspection lot could be created ( QM 162 )
The lot does not yet exist in the database ( QM 166 )
The notification must be saved before this function is executed. ( QM 168 )
This partner is not allowed as the invoice recipient ( QM 171 )
Assigning purchasing document to the notification ( QM 173 )
The inspection lot could not be created ( QM 177 )
Material will be posted to unrestricted stock, after saving notification ( QM 178 )
Material will be posted to blocked stock after the notification is saved ( QM 179 )
&1 return deliveries were created from &2 and &3 ( QM 181 )
Enter the storage location for the batch ( QM 183 )
No goods receipts exist for purchasing document &1 &2 ( QM 185 )
Usage decision has not been made for inspection lot ( QM 188 )
Could not set status 'DEF' (defects were recorded). ( QM 189 )
Goods issue slip will be printed after notification is saved ( QM 190 )
Purchasing info record does not exist ( QM 191 )
For this purchasing document a maximum of &1 &2 can be returned ( QM 193 )
Only the first purchasing document chosen is copied to the notification ( QM 194 )
Material document is not valid for the purchasing document you entered ( QM 195 )
Only the first vendor selected is copied to the notification ( QM 197 )
No suitable vendor could be assigned ( QM 198 )
Document flow could not be deleted ( QM 199 )
A notification was not selected ( QM 201 )
& records will not be displayed due to missing authorization ( QM 210 )
Cannot create customer returns order ( QM 222 )
Returned partial quantities are greater than the total qty to be returned ( QM 251 )
Returned subsets are smaller than the total quantity to be returned ( QM 252 )
There are only &1 &2 in &3 ( QM 253 )
Storage location & is managed by warehouse management (LE-WM) ( QM 254 )
Storage location & is not managed by warehouse management (LE-WM) ( QM 255 )
After saving the notification, the material is posted to scrap ( QM 256 )
Form not available ( QM 257 )
Transport order could not be created ( QM 258 )
Enter the price and currency ( QM 259 )
Quality notification will be created after the order has been saved ( QM 260 )
You cannot change the notification type ( QM 351 )
Priority &1 will be deleted because it is invalid ( QM 353 )
Change of notification type is no longer possible ( QM 355 )
Notif. type has not been determined, therefore no possible entries help ( QM 401 )
Function module &1 does not have &2 parameter ( QM 403 )
The function module name & you entered is invalid ( QM 404 )
The reference structure of &1 parameter must be &2, not &3 ( QM 405 )
Delete function modules before changing allowed function ( QM 407 )
Enter icons or function text ( QM 408 )
Ind. "Log line" can only be used in conj. with "No long text change" ( QM 409 )
Scenario &1 is not planned for notification type &2 ( QM 410 )
The function module &1 must be documented as &2 ( QM 412 )
The function module &1 cannot be used ( QM 413 )
Notification type &1 not allowed- incorrect notification type ( QM 502 )
&1 partners were deleted ( QM 551 )
Coding for &1 was deleted ( QM 552 )
No text exists in &2 language for function &1 ( QM 601 )
SAP-PHONE function is not active ( QM 602 )
Dependent Workflow tasks/function modules are not implemented ( QM 603 )
No partner is assigned to the notification ( QM 605 )
There are no items in the notification. 8D report cannot be created ( QM 608 )
There is no form assigned to shop paper &1 ( QM 610 )
There is no ITS server defined for this function ( QM 612 )
Decision could not be reported back to the repair order ( QM 614 )
Action Box Cannot be Displayed: Control Error ( QM 620 )
Check your entries for the notification type ( QM 708 )
The follow-up function cannot be displayed in display mode ( QM 709 )
Search for code includes search for code group ( QM 710 )
Ext. change of notification type only possible with same notif. category ( QM 854 )
Material & could not be converted from unit & to unit & ( QMEX 010 )
Internal error in program &1, function module / subroutine &2, code &3 ( QMEX 011 )
An internal error occurred in the application ( QMIP_EA 002 )
There is no active BAdI implementation for source type &1 ( QMIP_EA 004 )
An internal error occurred during &1 ( QMIP_EA 005 )
Message log contains errors; Inspection plan was not saved ( QMIP_EA 214 )
No characteristics for source can be copied to inspection plan ( QMIP_EA 216 )
Material master record &1 is not in any specified plant ( QMIP_EA 221 )
Quality view for material master record &1 in plant &2 does not exist ( QMIP_EA 222 )
Inconsistency of control indicator "quantitative characteristic" - &1 &2 ( QMIP_EA 224 )
Inconsistency of control indicator "quantitative characteristic" - &1 &2 ( QMIP_EA 225 )
Control indicators for &1 &2 allow for an upper specification limit ( QMIP_EA 226 )
Control indicators for &1 &2 allow for a lower specification limit ( QMIP_EA 227 )
Specification characteristic &1 allows for an upper specification limit ( QMIP_EA 228 )
Specification characteristic &1 allows for a lower specification limit ( QMIP_EA 229 )
No inspection plan exists for specification or plan is deleted ( QMIP_EA 230 )
Characteristic number is a required entry (data source &1) ( QMIP_EA 232 )
Value assignment type &1 is not valid for plant &2 ( QMIP_EA 240 )
Value assignment type &1 not valid for plants in material/plan assignment ( QMIP_EA 241 )
No material/plan assignment was determined ( QMIP_EA 243 )
Specification &1 is only valid from &2 ( QMIP_EA 245 )
No new material/plan assignments to be created (no deletion) ( QMIP_EA 322 )
No selected set exists for source &1 / &2 ( QMIP_EA 355 )
No codes can be derived for &1 &2 for the qualitative characteristic ( QMIP_EA 356 )
Standard values for source characteristic &1 could not be determined ( QMIP_EA 357 )
Based on MIC &1/&2, &3 is created as quantitative characteristic ( QMIP_EA 358 )
Based on MIC &1/&2, &3 is created as qualitative characteristic ( QMIP_EA 359 )
Value assgmt type &1: Only the first Q-relevant val. assgmt is considered ( QMIP_EA 401 )
There is more than one property for value assignment type &1 ( QMIP_EA 402 )
No values could be selected for the F4 help ( QMIP_EA 403 )
Result recording possible for quantitative characteristics only ( QM_API_ODATA_MSG 121 )
Sytem error during processing of long text &1 ( QP 049 )
Key date is overwritten with date & from change number ( QP 067 )
No original value recording for referenced characteristic & ( QP 086 )
Cond.charac.: There is no preceding required characteristic in operation ( QP 087 )
No original value recording for calculated characteristic & ( QP 088 )
No partial samples exist for referenced characteristic & ( QP 089 )
Formula &: no original value recording for referenced characteristic & ( QP 096 )
Cond.char. &: There is no preceding required charac. in the operation ( QP 097 )
Formula &: no original value recording for calculated characteristic ( QP 098 )
Formula &: no partial samples exist for referenced characteristic & ( QP 099 )
Error during key date selection ( QP 100 )
Nominal values cannot be specified for tolerance key ( QP 101 )
Processing with inspection points is required for insp. lots in PM orders ( QP 111 )
Maintain QM plant settings for plant & ( QP 123 )
Calculated characteristic & does not have partial samples ( QP 125 )
Referenced characteristic & has a different sampling procedure ( QP 126 )
Maintain the defect codes ( QP 127 )
The calculated characteristic must be a long-term characteristic ( QP 129 )
Formula &: The calculated characteristic has no partial samples ( QP 140 )
Formula &: Sampling procedure differs from characteristic & ( QP 141 )
Char. &: No defect code has been maintained ( QP 142 )
Formula & : Calculated characteristic must be a long-term characteristic ( QP 144 )
Maintain two characters for parameter name ( QP 158 )
Enter numbers for unplanned characteristics (QM client presettings) ( QP 200 )
There are no dynamic modification criteria for plan use & ( QP 201 )
Catalog type & is no longer available ( QP 206 )
Char. &: sampling procedure & does not fit dyn.mod.rule & ( QP 207 )
Char. &: sample unit & cannot be used with material & ( QP 208 )
Dyn. modification criteria & not defined for plan usage & ( QP 210 )
Char. &: Plan usage has too few dynamic modification criteria ( QP 211 )
Inspection characteristics must be maintained for operation &1 ( QP 212 )
Insp. Characs Exist for Op. &1 Although Indicator in Control Key Missing ( QP 213 )
No valid task list assignment for char. &1, dependent charac. specs &2 ( QP 214 )
Char. &: sampling procedure & cannot be used ( QP 215 )
Ch. & : Conflicts with char. & (operation &) due to batch classification ( QP 216 )
Char. &1: Mstr insp. charac. already used in char. &2 (operation &3) ( QP 217 )
Reference to char. & not valid because of dyn. modif. ( QP 218 )
Sampling procedure does not fit dyn. mod. rule in char. & ( QP 219 )
No suitable characteristic found ( QP 220 )
Char. &: Sample-drawing text cannot be printed ( QP 221 )
Charac. & : Different sample unit of measure for same partial sample ( QP 222 )
Results Rec. by Insp. Unit: No Char. Without Indep. Multiple Samples (&) ( QP 224 )
Op. &1 Results Rec. by Insp. Unit: No Charac. with Single Value Recording ( QP 225 )
Dynamic modification criteria are proposed according to task list usage & ( QP 249 )
Dynamic modification rule & cannot be used ( QP 250 )
Insertion increment must be smaller than the increment itself ( QP 251 )
Dynamic modification rule is reset due to the dynamic modification level ( QP 252 )
Define dynamic modification rule & ( QP 253 )
Dynamic modification rule & is not compatible with sampling procedure ( QP 254 )
Sampling proc. & is not compatible with dynamic modification rule & ( QP 255 )
QM data: Maintain inspection point reference ( QP 256 )
QM data: maintain quantity-related data ( QP 257 )
QM data: maintain time-related data ( QP 258 )
This inspection point completion is not possible for task list type &2 ( QP 259 )
Record an inspection point of type "freely-defined" or "sample" ( QP 280 )
Create an inspection point of the type "sample" ( QP 281 )
Sample-drawing procedure only allowed for insp. point type "sample" ( QP 286 )
You cannot define characteristics for standard tasks ( QP 288 )
Inspection point &1 (type &2) is not allowed for this task list type (&3) ( QP 289 )
Inconsistency in plan usage &: dyn. sampling criterion & not available ( QP 290 )
Dynamic modification rule &1 is only possible for optional characs ( QP 291 )
No dynamic modification level can be defined for usage & ( QP 293 )
Dynamic modification level & already used; & not allowed ( QP 294 )
Use & with dynamic modification criterion & already defined in plan ( QP 295 )
First delete dynamic modification data for this plan ( QP 296 )
No dynamic modification data can be defined for this task list type & ( QP 297 )
Possible dynamic modification levels: initial or 1 (lot level) ( QP 298 )
No characteristics can be defined for this plan type ( QP 299 )
No characteristics available for operation & ( QP 301 )
Enter a validity time period for the tolerance change ( QP 305 )
There are no assignments ( QP 307 )
The characteristic number must be between & and & ( QP 310 )
Dependent characteristic specs not possible for task list type & ( QP 313 )
Characteristic & has no reference ( QP 314 )
Characteristic &1: Reference to master inspection char. &2 was cancelled ( QP 315 )
Enter a target value ( QP 319 )
Select a smaller class width ( QP 323 )
The target value is smaller than the lower tolerance ( QP 326 )
The class range exceeds the tolerance range ( QP 327 )
The target value is greater than the upper tolerance ( QP 329 )
Enter the characteristic category or specify a control key profile ( QP 330 )
Dyn. modification level changed: Check dyn. mod. rule for insp. chars ( QP 332 )
Check the sample unit of measure (Proposal: Operation unit of measure) ( QP 335 )
Define sampling procedure & ( QP 340 )
Sampling procedure & cannot be used ( QP 343 )
The tolerance range is smaller than the class width entered ( QP 344 )
Correct the dyn. modification level (only 0, 1, 3 or init. value allowed) ( QP 347 )
There is no characteristic data on the selected screen ( QP 349 )
No valid version found for master inspection characteristic & ( QP 352 )
Master inspection characteristic &, version & is being processed by &3 ( QP 354 )
Master inspection characteristic &1 in version &2 is not released ( QP 355 )
Check your selections ( QP 357 )
Dependent characteristic specs for referenced insp. char. not allowed ( QP 359 )
Tolerance range cannot be calculated ( QP 360 )
Insert interval must be smaller than & ( QP 361 )
Select a new insert position ( QP 363 )
Entry & is positioned (internal) ( QP 364 )
Data will be reset ( QP 365 )
Version & is the current valid version ( QP 367 )
Confirm the sample unit of measure & ( QP 369 )
Lower tolerance limit is not on class limit ( QP 371 )
Upper tolerance limit is not within class limit ( QP 372 )
Only the first selected characteristic is unlocked ( QP 375 )
Define share estimate procedure & ( QP 376 )
No share estimation procedure was selected ( QP 377 )
Share estimation procedure & and control indicator are not compatible ( QP 378 )
Inspection characteristic & is linked to a class characteristic ( QP 383 )
Enter a method that is assigned to the master inspection characteristic ( QP 388 )
Dependent characteristic specifications will be deleted ( QP 391 )
Complete the data entry ( QP 396 )
Only relative tolerances can be defined as depending on a target value ( QP 398 )
No valid version for selected set & is available ( QP 402 )
Select catalog type (entry &) ( QP 406 )
Code group &2 is currently being processed by &1 ( QP 407 )
Selected set &2 in plant &3 is currently being processed by &1 ( QP 408 )
No master inspection characteristic is assigned ( QP 413 )
Define catalog type & ( QP 417 )
No selected sets are allowed in catalog type & ( QP 418 )
Select another catalog type ( QP 419 )
Enter a selected set or code group ( QP 420 )
Check your data ( QP 423 )
No dependent characteristic specifications are available ( QP 424 )
Catalog type & cannot be used in the characteristic ( QP 425 )
Sequences are not available in plan category & ( QP 428 )
Data will be copied after the cursor position (characteristic &) ( QP 430 )
Select an existing characteristic ( QP 431 )
You cannot copy data to characteristic & ( QP 433 )
Characteristic & is not a calculated characteristic ( QP 438 )
SPC criterion & is reset ( QP 441 )
SPC criterion can be entered ( QP 442 )
Charac. & is not used in a material specification for plan materials ( QP 446 )
Maintain procedure for share calculation ( QP 447 )
You must know the characteristic version in order to choose a method ( QP 448 )
There is no long-term characteristic used in the formula ( QP 449 )
When you select ENTER, position only exisiting characteristics ( QP 450 )
Conditional characteristic must also be a long-term characteristic ( QP 454 )
No dyn. modif. rule is assigned to specified characteristic & ( QP 455 )
Only enter a procedure for the dynamic modification rule ( QP 456 )
Test equipment & is not defined for operation ( QP 457 )
Characteristic & will not be changed ( QP 458 )
Inspection characteristic has no link to a class characteristic ( QP 459 )
Entering a dynamic modification rule is not allowed ( QP 474 )
No formula is defined for the inspection characteristic ( QP 475 )
No test equipment assigned ( QP 476 )
The current valid version of &1 is not released ( QP 480 )
You can only use suppl. or cust. selection criteria with ref. to a mat. ( QP 481 )
Unit & cannot be converted into the operation unit & ( QP 500 )
Sample unit &1 is not compatible with task list unit of measure & ( QP 501 )
Non-relevant fields will be initialized ( QP 504 )
Unit & cannot be converted in header unit of measure & ( QP 505 )
Internal errors are initialized by the system (&1) ( QP 506 )
The entry is not reccognized as a selected set ( QP 516 )
You have not assigned the insp. point description in the task list header ( QP 520 )
Dynamic modification level was initialized for task list usage &1 ( QP 522 )
Dynamic modification rule was initialized for task list usage & ( QP 523 )
Replace sampling procedure for inspection characteristics if required ( QP 524 )
Discrepancy between memory and memory management of operation data ( QP 550 )
Enter the plant for the master inspection characteristic & ( QP 560 )
No relative specification limits defined for target value ( QP 566 )
The tolerance key is being reset ( QP 574 )
No authorization to change characteristics. You can only display them ( QP 575 )
Error during authorization check. Contact your system administrator ( QP 576 )
You are not authorized to include characteristic &1 &2 &3 ( QP 577 )
Ch &1: You are not authorized to include insp. method &2 &3 &4 ( QP 578 )
Charac. &1: Deselecting "Calculate formula" indicator ( QP 579 )
Charac. &1: Link exists to dynamic modification for characteristic &2 ( QP 580 )
Charac. &1: Cancelling test equipment assignment ( QP 581 )
Characteristic &1 is a conditional characteristic ( QP 582 )
CH &2: There is more than one selected set for catalog &1 ( QP 585 )
Copying characteristic data from the tolerance key ( QP 617 )
Control indicator and tolerance key are not compatible ( QP 621 )
Limit values and class definitions were reset ( QP 622 )
Target value is set to zero (relative tolerances) ( QP 623 )
Conflict for at least 1 characteristic due to change number ( QP 630 )
Conflict for at least 1 dep. char. spec. due to change number ( QP 631 )
Data for dependent characteristic specifications (&1) are not consistent ( QP 659 )
The inspection characteristic data &1 is inconsistent ( QP 660 )
You do not have authorization (&) to assign master data ( QP 662 )
The key for inspection method & was not completely entered ( QP 663 )
Enter an upper specification limit ( QP 670 )
Enter a lower specification limit ( QP 671 )
Enter a class number, class width and class midpoint ( QP 672 )
Enter a formula for calculating characteristic results ( QP 673 )
Enter a target value ( QP 674 )
Dependent characteristic specifications are also deleted ( QP 701 )
The changes are copied to dependent characteristic specifications ( QP 702 )
An internal error occurred when you called up the function ( QP 711 )
Only materials without a deletion flag are displayed ( QP 804 )
Master inspection characteristic &1 &2 &3 cannot be replaced ( QP 851 )
Inspection characteristic will be replaced by itself ( QP 852 )
You must enter a version for the new master inspection characteristic ( QP 856 )
Master inspection characteristic &1 &2 &3 is not released ( QP 858 )
Master inspection characteristic & & & is not completely maintained ( QP 866 )
The new characteristic is a calculated characteristic ( QP 867 )
If necessary, assignment of test equipment must be changed ( QP 868 )
SPC criterion not specified for sampling procedure & ( QP 869 )
Dynamic modification rule & is not compatible with sampling procedure & ( QP 873 )
Master insp. characteristic &1 &2 &3 does not have a valid use in plans ( QP 874 )
There is no link between a master inspection char. and a class char. ( QP 876 )
Replacement with master inspection characteristic &1 &2 &3 not possible ( QP 877 )
See long text for reasons for lock indicator ( QP 879 )
Code groups from catalog type 1 are not used in plans ( QP 881 )
Information for copying task list data ( QP 884 )
Enter a sampling procedure ( QP 886 )
Function not supported for task list type & ( QP 890 )
Select other characteristic/assignment number or other change number ( QP 891 )
An internal error occurred in the application ( QPCP 001 )
You do not have the authorization to execute this function ( QPCP 002 )
Internal error when executing authorization check ( QPCP 003 )
There is no authorization profile stored in the user master record ( QPCP 004 )
An authorization is damaged in the user master record ( QPCP 005 )
The control plan is closed ( QPCP 007 )
Internal error in status management ( QPCP 008 )
Errors occurred when saving the control plan ( QPCP 014 )
Control plan identifier &1 protected ( QPCP 017 )
The SAVE method was called without COMMIT WORK ( QPCP 019 )
Error in change document creation/analysis: & & ( QPCP 028 )
Classed recording is switched off for characteristic &1 ( QPCP 041 )
You do not need to assign test equipment for characteristic &1 ( QPCP 042 )
Characteristc &1 is not distinguished as a formula ( QPCP 043 )
Number in number range interval &1 (&2 to &3) ( QPCP 070 )
Inspection char. &1 from plan &2 links to a deleted FMEA characteristic ( QPCP 088 )
A control plan could not be created based on your entries ( QPCP 089 )
Plan creation date must not be greater than selection date ( QPCP 090 )
Could not find a plan for the data entered ( QPCP 120 )
Process category &1 is not relevant for material &2 ( QPCP 304 )
Selection date &1 is before today's date ( QPCP 306 )
Task list &1 &2, alternative &3 is not available or invalid ( QPLEXT 003 )
Specify an object type ( QPMS 001 )
Error in material-task list assignments for multiple specifications ( QPMS 002 )
Material-only assignment is missing for inspection plan ( QPMS 003 )
In addition to assigning material &1, assign a customer or object ( QPMS 004 )
Object type &1 is not allowed for assignment of customer &2 ( QPMS 006 )
Object type &1 is not allowed with initial field &2 ( QPMS 007 )
The country assignment is missing for object &1 ( QPMS 008 )
Object type &1 is not allowed for object &2 ( QPMS 009 )
Material-task list assignment not possible for multiple specifications ( QPMS 011 )
Material-task list assignment is incomplete ( QPMS 012 )
Insp. plan not suitable for multiple specifications - change assignments ( QPMS 013 )
Material-task list assignment cannot be deleted ( QPMS 014 )
Multiple specification for material-only assignment not possible ( QPMS 015 )
Multiple specifications are not allowed in insp. plans with insp. points ( QPMS 016 )
Edit the inspection plan using the Engineering Workbench ( QPMS 017 )
Edit the inspection plan using the Engineering Workbench ( QPMS 018 )
Inspection method can only be assigned using the Engineering Workbench ( QPMS 019 )
Indicator "Parameter characteristic" cannot be copied from template ( QPMS 202 )
The parameter characteristic cannot be displayed ( QPMS 203 )
Method cannot be changed on the detail screen ( QPMS 204 )
Reference to inspection characteristic is not allowed ( QPMS 205 )
The inspection characteristic to which you want to link does not exist ( QPMS 206 )
You cannot assign/delete the method to/from a primary characteristic ( QPMS 207 )
Characteristic with insp. method cannot be a parameter characteristic ( QPMS 208 )
Delete the method and parameter characteristics for the primary char. ( QPMS 209 )
Central replacement of methods with parameter chars not possible ( QPMS 210 )
Central replacement using methods with parameter chars not possible ( QPMS 211 )
Old and new method with parameter chars. Add new parameter chars. ( QPMS 212 )
Replace the method with a method with parameter characteristics ( QPMS 213 )
Incomplete method ID. Either enter data in all fields or none ( QPMS 214 )
Document version of the material has changed. ( QPVP 020 )
Comparison of inspection characteristics is completed. ( QPVP 028 )
Node information from the viewable file could not be transferred. ( QPVP 036 )
Number range object QPVP_ID could not generate a number. ( QPVP 075 )
Number range object QPVP_ID could not generate a number. ( QPVP 076 )
Number range object QPVP_ID interval is used up. ( QPVP 077 )
Number range object QPVP_ID could not generate a number. ( QPVP 078 )
Number range object QPVP_ID could not generate a number. ( QPVP 079 )
An internal error occurred in the application ( QQM_EA 001 )
Object category &2 is not intended for notification type &1 ( QQM_EA 004 )
No active BAdI implementation for object category &1 exists ( QQM_EA 005 )
Customizing of object category &1 is incomplete ( QQM_EA 014 )
Item contains incomplete assigned objects ( QQM_EA 020 )
Object &1 does not contain a reference to the notification ( QQM_EA 039 )
Notification-type-dependent layout was saved ( QQM_EA 060 )
Could not further extend selection criteria ( QQM_EA 103 )
Notification type Q9 reserved for notifications that originate in SNC ( QQM_EA 214 )
Internal error in function module &1 &2 &3 &4 ( QRPCC 001 )
No product cost collector exists for the specified characteristics ( QRPCC 101 )
An invalid Controlling level is assigned to material &1 ( QRPCC 102 )
Product cost collector is not allowed for APO confirmation ( QRPCC 103 )
Product cost collector is only allowed for confirmation from APO ( QRPCC 104 )
Cost element list not available with this product cost collector ( QRPCC 201 )
Product cost collector &1 cannot be deleted ( QRPCC 301 )
Internal error in function module &1 &2 &3 &4 ( QRPRP 001 )
No component can be found for cost estimate number &1 ( QRPRP 002 )
No cost estimate number found for component &1 ( QRPRP 003 )
No single documents can be posted for the confirmation ( QRPRP 004 )
No sales order stock available for material &1 ( QRPRP 005 )
Only reporting point backflushes allowed in current or previous period ( QRPRP 101 )
Account assignment object &1 is locked ( QRPRP 104 )
First enter variant = "01" ( QS 002 )
Automatic assignment of specs not possible ( QS 003 )
The sample cannot be calculated automatically for a manual entry ( QS 004 )
You can only inspect by characteristic using the inspection specification ( QS 013 )
For insp. type &, the requirement is greater than the offer ( QS 015 )
Assign a task list usage to the inspection type &1 in Customizing ( QS 018 )
A 100% inspection is not possible for manual sample determination ( QS 019 )
Caution: no relative tolerances defined for target value ( QS 020 )
You cannot enter the sample size manually for inspection type &1 ( QS 023 )
Check the data for sample calculation for inspection type &1 ( QS 024 )
You can no longer change the control indicators in the characteristic ( QS 027 )
Lower limit for unplanned characteristics should not be changed ( QS 029 )
Notification type &1 is not intended for defects recording ( QS 032 )
A share of scrap is not supported for the specified qual. score procedure ( QS 035 )
You cannot enter a sampling procedure for inspection type &1 ( QS 037 )
You cannot enter a dynamic modification rule for inspection type &1 ( QS 038 )
Qual. score procedure for insp. type &1 not compatible with type of insp. ( QS 039 )
Score must be between & and & ( QS 043 )
Number must be greater than & ( QS 044 )
You cannot select 'X' for this inspection type ( QS 046 )
You cannot assign inspection type &1 to a material ( QS 047 )
Insp. by config. only allowed with a task list/material specification ( QS 048 )
You cannot define the sample for inspection type &1 manually ( QS 050 )
Enter dynamic modification rule or set indicator "Manual sample" ( QS 051 )
You cannot inspect according to batch determination only ( QS 052 )
Inspection type(s) & will be deleted in target system ( QS 054 )
Inspection types for materials &1, plant &2 will not be transferred ( QS 056 )
A link to a standard batch characteristic is not allowed ( QS 072 )
You have not specified a unit of measure ( QS 074 )
Characteristic is used in at least one certificate profile ( QS 075 )
Enter a unit of measurement ( QS 076 )
Master inspection characteristic is already linked to class char. &1 ( QS 077 )
The most up-to-date version is being processed ( QS 078 )
Reference to the class characteristic will not be copied ( QS 079 )
Data is preassigned in the master inspection characteristic ( QS 080 )
The class char. and the master inspection char. are not compatible ( QS 081 )
You cannot use master inspection char. as "incomplete copy model" ( QS 082 )
You can only change certain control indicators ( QS 084 )
Class characteristic has more than one interval ( QS 086 )
No selected set is assigned to the class characteristic ( QS 087 )
Specification limit for the class char. differs from interval limit ( QS 090 )
Class characteristic is not released for use ( QS 091 )
Use a suitable tolerance key ( QS 093 )
Class charac. is already linked with master insp. charac. &2 in plant &1 ( QS 094 )
You cannot link class characteristic & to the master insp. characteristic ( QS 096 )
You cannot set "Data record is archived" manually ( QS 098 )
Enter a sample-drawing text in language &1 ( QS 102 )
You cannot enter an "*" ( QS 111 )
Status change not allowed here ( QS 112 )
For method &1 (plant &2), there is no released version for key date &3 ( QS 113 )
Tolerance change results in an incorrect tolerance range ( QS 118 )
Both specification limits are necessary for the calculation ( QS 124 )
Target value is smaller than a lower limit ( QS 128 )
Target value is greater than an upper limit ( QS 131 )
Select a valid position ( QS 146 )
Create code & or release the code group ( QS 148 )
No validity period was selected for master inspection charac. &1 &2 &3 ( QS 150 )
You have not assigned a defect code ( QS 153 )
Characteristic & & & has already been created ( QS 157 )
First make an entry in TQ01 for & ( QS 159 )
Enter a characteristic type ( QS 160 )
No time axis is available for this master inspection characteristic ( QS 161 )
Enter a catalog type and a code group/selected set ( QS 162 )
Create or release code group & in catalog & ( QS 164 )
First create or release selected set & in catalog & ( QS 166 )
Select a tolerance key that corresponds to the type of characteristic ( QS 168 )
Check the target value. Tolerance key is used ( QS 172 )
Inspection method & & & cannot be deleted ( QS 175 )
No characteristic could be selected ( QS 176 )
You cannot use entries from catalogs 1 and 3 ( QS 178 )
Characteristic version is marked for deletion ( QS 181 )
You can no longer use this characteristic version ( QS 182 )
Characteristic is being used and therefore cannot be deleted ( QS 186 )
Changes cannot be distributed using ALE ( QS 187 )
Target value is copied from the tolerance key ( QS 188 )
Characteristic & & & was changed with history ( QS 191 )
Inspection methods are assigned to the characteristic ( QS 193 )
This code was deleted. It cannot be created again. ( QS 200 )
Selected sets are not defined for this catalog type ( QS 204 )
Catalog type 0 through 9 are reserved. You cannot delete them ( QS 207 )
This code group was deleted. You cannot create it again. ( QS 209 )
First make entries for this code group ( QS 210 )
No other texts exist. Deletion is not possible ( QS 211 )
This code group contains codes. You cannot delete it. ( QS 212 )
The selected set contains codes. You cannot delete it. ( QS 219 )
The code is assigned to a selected set. You cannot delete it ( QS 224 )
First delete all code groups from catalog & ( QS 225 )
Language & is not defined for catalog type & (TQ15T) ( QS 227 )
Language & is not defined for code group & ( QS 228 )
Codes in language & are assigned to code group & ( QS 230 )
Code group is released ( QS 234 )
No entries were found for the specified selection ( QS 240 )
There are no details for this line. ( QS 241 )
Selected set is released ( QS 242 )
You cannot select this line ( QS 243 )
Entries in other languages are available ( QS 261 )
Enter a valuation or include additional data ( QS 264 )
Classification can only be displayed ( QS 269 )
Catalog types 0 through 9 are reserved. Change your entry. ( QS 272 )
Select function is not supported in this field ( QS 273 )
Catalog types A through O are reserved and cannot be deleted ( QS 277 )
First delete all entries in catalog & ( QS 280 )
Indicator for inventory posting in the background will be canceled ( QS 285 )
No stock posting default value available for selected code ( QS 286 )
Conversion was not completed for master inspection characteristics ( QS 288 )
Conversion not completely carried out for inspection methods ( QS 290 )
You have no authorization for this catalog entry ( QS 291 )
Use the check boxes to make your selection ( QS 292 )
Select function is not supported for this field ( QS 293 )
No entries have been selected ( QS 294 )
Code group/selected set does not contain any codes ( QS 295 )
No selection is possible in display mode ( QS 296 )
Select function is not supported for this field ( QS 297 )
You have not selected any entries ( QS 298 )
No entries were found in catalog &1 ( QS 299 )
Internal error: return code &1 &2 &3 ( QS 334 )
The "copy" function is not supported for this row ( QS 335 )
The "copy" function is not supported for this row ( QS 336 )
The "copy" function is not supported for this row ( QS 337 )
At least one code is missing in the language & ( QS 340 )
Application: QM ( QS 341 )
The text for the catalog entry does not exist ( QS 342 )
Enter a code group for selection ( QS 343 )
Define 100% inspection, inspection percentage or sampling procedure ( QS 345 )
You do not have authorization for &1 code groups of your selection ( QS 348 )
Released code group &1 is already being used ( QS 352 )
Released selected set &1 is already being used ( QS 353 )
Of &1 codes selected, &2 were copied ( QS 354 )
The selection quantity & for the selected codes is already being used ( QS 356 )
Code group was generated by an external source and cannot be deleted ( QS 360 )
Code was generated by an external source and cannot be deleted ( QS 361 )
Selected set was created by external source, deletion not possible ( QS 362 )
Internal error during ALE transfer of inspection methods ( QS 370 )
Insp. method versions do not have the same insp. method/plant combination ( QS 371 )
Inspection method &1 for plant &2 cannot be saved ( QS 372 )
Inspection method table is empty (error during ALE transfer) ( QS 373 )
Inspection method short text table is empty (error during ALE transfer) ( QS 374 )
Create insp. method/master insp. characteristic &1&: Details not complete ( QS 375 )
Complete the short text data ( QS 376 )
Create insp. method/master inspection char. &1&: Short text exists twice ( QS 377 )
& version(s) found of inspection methods to be distributed ( QS 378 )
Error when creating, writing, or reading error log ( QS 379 )
& version(s) found of master inspection characteristics to be distributed ( QS 380 )
Short text for insp. char./insp. method &1, plant &2, version &3 missing ( QS 381 )
Inspection method &1 for plant &2, version &3 cannot be deleted ( QS 382 )
No recipients found when sending the master record ( QS 383 )
Master inspection characteristic &1 &2 &3 is used ( QS 385 )
Select "Add task List Data" or "Change" ( QS 386 )
Only specify one sampling procedure ( QS 387 )
You do not have authorization for &1 selected sets of your selection ( QS 390 )
Maintain the QM transaction control for & ( QS 401 )
Customer master does not exist ( QS 402 )
Enter a valid sales organization ( QS 403 )
Maintain text for sales organization in language & ( QS 404 )
Data for customer & is saved ( QS 405 )
An entry already exists for this material ( QS 406 )
No additional material is selected ( QS 407 )
Select at least one material via button ( QS 408 )
You cannot scroll in an empty list ( QS 409 )
No long text exists for this material ( QS 411 )
You are not authorized to maintain the control data ( QS 412 )
Material is not yet defined for Sales and Distribution ( QS 413 )
No materials are assigned yet ( QS 414 )
Material is not defined for Sales and Distribution ( QS 415 )
The customer is blocked for deliveries ( QS 416 )
Activation of multiple specifications cannot be reversed ( QS 420 )
Cannot deactivate multiple specifications ( QS 421 )
Edit client &1 and plant &2 in Customizing for Archiving ( QS 501 )
Archiving object has inspection lot number 0 ( QS 502 )
Error during DELETE: Inspection lot &2 does not exist in client &1 ( QS 503 )
Error during UPDATE: Inspection lot &2 does not exist for client &1 ( QS 504 )
Method & & & was changed with history ( QS 701 )
Inspection & & & has already been created ( QS 707 )
No validity period was selected for inspection method & & & ( QS 708 )
This inspection method is marked for deletion ( QS 709 )
No time line is available for this inspection method ( QS 710 )
Method was already used and as a result cannot be deleted ( QS 714 )
No method could be selected ( QS 715 )
This inspection method can no longer be used ( QS 718 )
You cannot enter an "*" ( QS 725 )
You cannot set "Data record is archived" manually ( QS 729 )
Master record & & is classed ( QS 730 )
Internal error : Field & is initial ( QS 732 )
Changes cannot be distributed using ALE ( QS 733 )
Internal error when reading classification ( QS 734 )
Specify a language ( QS 765 )
Language & must not be changed ( QS 788 )
Sampling procedure & is not compatible with characteristic ( QS 801 )
Sampling procedure & does not exist ( QS 802 )
Characteristic indicator already available in characteristic &1 &2 &3 ( QS 803 )
Master inspection characteristic has not been completely maintained ( QS 805 )
You have not yet created or released master insp. characteristic & ( QS 806 )
No class characs for material & that can be linked to master insp. chars. ( QS 808 )
Check sample unit of measure (default: base unit of measure) ( QS 810 )
Confirm the sample unit of measure & ( QS 811 )
Unit of measure & is not defined for material & ( QS 812 )
No appropriate sampling procedure could be found ( QS 814 )
Error INSERT QMSP & & ( QS 819 )
Error DELETE QMSP & & ( QS 820 )
Error UPDATE QMSP & & ( QS 821 )
Master insp. charac. was already assigned to this material specification ( QS 827 )
Correct purchase order history for insp. lot & using transaction MWBQ ( QS 830 )
Error during creation of change document & ( QS 832 )
No class charac. is assigned to the master inspection characteristic ( QS 834 )
Master insp. charac. has no link to the class charac. &1 ( QS 835 )
Characteristics of planned status from &1 will be proposed ( QS 836 )
Selected master inspection characteristics will be copied ( QS 838 )
No maintenance authority for classification ( QS 844 )
Classification is not set correctly ( QS 845 )
The activation date & lies in the future ( QS 846 )
No material specification has been created for the material ( QS 848 )
For characteristic &1 &2, a sampling procedure has not been entered ( QS 849 )
The reference will be cancelled for the selected characteristics ( QS 850 )
You cannot use a classed characteristic in the material specification ( QS 855 )
Characteristic you have entered is an SPC characteristic ( QS 856 )
The reference will be reestablished for the selected characteristics ( QS 857 )
You have not selected a valid line ( QS 858 )
You have not selected a valid line ( QS 859 )
Batch &1 &2 &3 can only be partially valuated ( QS 860 )
QM characteristics and batch values cannot be compared ( QS 861 )
Characteristics in the current material specification will be proposed ( QS 862 )
Characteristics will be deleted from the material specification ( QS 863 )
For the charac., there is at most one relevant value for classification ( QS 864 )
No planning has taken place for &. Displaying current status ( QS 865 )
Batch &2 of material &1 in plant &3 can only be partially valuated ( QS 866 )
Processing can only be performed using the stability study notification ( QST 003 )
Status of last inspection lot for sample & does not allow a new lot ( QST 012 )
Quantity for storage cond. & is greater than quantity of initial sample ( QST 015 )
Quantity of samples for storage conds exceeds quantity of initial sample ( QST 019 )
Completion of initial test: Study & is already locked ( QST 021 )
Completion of initial test: Study & could not be locked ( QST 022 )
Operation "Completion of Initial Test" could not be performed ( QST 023 )
The date of receipt cannot be later than the date of release ( QST 027 )
Completion not possible: There are outstanding dates for follow-up test ( QST 038 )
Cannot unlock: Sample for storage condition & is removed from storage ( QST 039 )
Default & for testing schedule no. not possible. Manual entry required ( QST 040 )
The testing schedule is incomplete ( QST 043 )
No initial sample found for stability study & ( QST 045 )
The initial sample is locked. Confirmation is not possible ( QST 051 )
Cannot delete storage condition &, as it is contained in testing schedule ( QST 058 )
Cannot start the study: Not all storage conditions have been stored ( QST 059 )
New storage conditions must be added to testing schedule & ( QST 068 )
Error while executing flexible inspection specifications function ( QST 071 )
Flexible inspection specifications: No characteristics selected ( QST 072 )
SYSTEM: Status & of the inspection plan does not exist ( QST 075 )
The inspection plan is not available without restrictions ( QST 076 )
An inspection of material samples is not planned in this inspection plan ( QST 077 )
The inspection plan entered is not compatible with the strategy :& ( QST 078 )
The testing schedule & is not part of a stability study ( QST 079 )
The sample & for this item cannot be changed ( QST 082 )
There are no characteristics available for flexible inspection specs ( QST 084 )
No printer could be determined for the printing of the storage list ( QST 086 )
The plant presetting is not completely maintained in the cust. applic. ( QT 001 )
The insp. point ident. is not completely maintained in the cust. applic. ( QT 002 )
The insp. point ident. is not completely maintained in the cust. applic. ( QT 003 )
No selected set exists for the inspection point &1 or plant &2 ( QT 006 )
The plant presetting is not completely maintained in the cust. applic. ( QT 007 )
You can only create inspection points in create mode ( QT 008 )
Error in change of system settings for inspection point (TQ79) ( QT 011 )
Sample &1 does not belong to current inspection lot &2 ( QT 012 )
Change the status of sample &1 to allow results recording ( QT 013 )
First create a master record for the sample &1 in the system ( QT 014 )
An inspection point already exists for the key fields ( QT 015 )
You are not authorized to change the inspection point fields ( QT 016 )
Results confirmation not possible with inspection points from PI sheet ( QT 103 )
The exceptions for function module &1 differ from the example module ( QT 111 )
The export params for function module &1 differ from the example module ( QT 112 )
The import params for function module &1 differ from the example module ( QT 113 )
The tables for the function module &1 differ from the example module ( QT 114 )
You must assign a batch to the partial lot ( QT 203 )
You must assign a partial lot to the inspection point ( QT 205 )
Enter quantity ( QT 206 )
You have already assigned the number for a new batch ( QT 207 )
The previous selection is canceled ( QT 208 )
The entry made for the quantity is cancelled ( QT 210 )
Quantity confirmation cannot be changed, data has been reset ( QT 211 )
Control key does not allow the operation to be confirmed ( QT 212 )
No inspection point available for the operation ( QT 213 )
There is no scrap confirmation, although the inspection point is rejected ( QT 214 )
The previous operation has not yet been confirmed ( QT 215 )
For operation &2, a quantity has not yet been entered for partial lot &1 ( QT 216 )
There is still no batch assigned to the partial lot ( QT 217 )
Set indicator 'No Confirmation' ( QT 218 )
Confirmation will be canceled ( QT 219 )
Confirmation is expected via process message ( QT 220 )
Due to the status of the order, confirmation cannot be made to PP ( QT 221 )
Confirmations were recorded in the header of order &1 ( QT 222 )
You are not authorized to carry out a PP confirmation ( QT 223 )
Partial lot assignment to insp.point is available with another material ( QT 224 )
No confirmation parameters are defined in plant &1 for order type &2 ( QT 225 )
Confirmation not allowed or not activated ( QT 226 )
The unit of measurement is not defined for this material ( QT 227 )
Operation &1 of sequence &2 cannot be confirmed ( QT 228 )
Valuation of the inspection point is transferred to the partial lot ( QT 301 )
All entries for the new partial lot are lost after choosing a part. lot ( QT 302 )
Inspection lot &1 cannot be found ( QT 305 )
Inspection lot &1 is not relevant ( QT 306 )
Partial lot &1 does not belong to inspection lot &2 ( QT 307 )
The confirmation cannot be cancelled at this point. ( QT 311 )
First maintain table TQ01 for transaction & ( QT 312 )
Code &1 does not exist in selected set &3 ( QT 314 )
A maximum of three columns can be chosen as sort criteria ( QT 322 )
The list can be sorted according to the sort sequence you predefine ( QT 324 )
Material number(QAIPP) differs from material number in the inspection lot ( QT 430 )
Abnormal termination: database error &1 &2 &3 &4 ( QT 888 )
Batch is identical to batch from inspection lot ( QV 003 )
The client-specific basic options need to be maintained for QM ( QV 010 )
The basic settings need to be maintained for QM in plant & ( QV 011 )
Error in status management: & ( QV 012 )
Missing object number: problem for status updating ( QV 013 )
No stock proposal available ( QV 015 )
& short-term characteristics are still open ( QV 016 )
& long-term characteristics are still open ( QV 017 )
Serial number management not supported ( QV 018 )
Call up the 'Change with history' transaction ( QV 019 )
Create batch & first ( QV 020 )
Error & has occurred sending a mail (-> long text) ( QV 021 )
Follow-up actions are not supported for the required level ( QV 022 )
Use the function 'Orders for production lots' ( QV 023 )
Assigned order & is neither completed nor confirmed ( QV 025 )
The run schedule header has not yet reached the end of its runtime ( QV 026 )
Select a usage decision code (cancellation not allowed) ( QV 027 )
Defective quantity greater than inspected quantity. Correct your entry. ( QV 028 )
Inspected quantity greater than actual lot quantity. Check your entry. ( QV 029 )
You have to enter a batch for material & ( QV 030 )
Batch & has "unrestricted use" status ( QV 033 )
Batch & has "blocked" status ( QV 034 )
Purchase order & & cannot be used ( QV 036 )
The usage decision was reset ( QV 038 )
This inventory posting is not supported for the material ( QV 039 )
Storage location change not supported for this material ( QV 040 )
Error in the quantity fields for the insp. lots ( QV 042 )
Batch assignment is required ( QV 043 )
Assignment of a batch is required ( QV 044 )
The UD valuation and the batch status deviate from one another ( QV 046 )
Change batch status to -unrestricted- based on the usage decision ( QV 047 )
Change batch status to -restricted- based on the usage decision ( QV 048 )
Batch status cannot be changed for inspection lot & ( QV 055 )
The validity period end date for prod. version &1 has not been reached ( QV 057 )
Usage decision data for inspection lot cannot be displayed ( QV 100 )
Correcting characteristic counters ( QV 101 )
The usage decision for inspection lot & has not been made yet ( QV 102 )
Basic settings for the transaction need to be maintained in Customizing ( QV 103 )
The function module has not been created yet ( QV 109 )
Stock transfer to EWM-managed storage location is not possible ( QV 114 )
Stock posting for the inspection lot is not finished ( QV 117 )
The sum of the quantities that still must be posted is & ( QV 118 )
Selected set code &2 does not exist, or data entered is incomplete ( QV 121 )
Use the function "Usage decision selection" ( QV 122 )
You do not have the authorization for usage decision & & & & ( QV 123 )
Short-term inspections are still open ( QV 124 )
Inspections are still open ( QV 126 )
Internal error - Authorization for usage decision & & & & ( QV 128 )
Internal error - Authorization for stock postings ( QV 129 )
No usage decision was selected ( QV 130 )
You are not authorized to close inspections with open required characs. ( QV 135 )
Internal error during authorization check ( QV 136 )
Inspection closure not meaningful due to delivery certificate status ( QV 137 )
Goods have not been delivered yet; UD prevents delivery note changes ( QV 138 )
Select the function "Usage decision selection" ( QV 142 )
Posting >> & << was copied ( QV 143 )
No stock proposal available ( QV 144 )
No changes were carried out ( QV 145 )
Rejected partial lots exist; delivery is not possible ( QV 146 )
The current status of partial lot &1 does not allow the desired activity ( QV 147 )
Sample and reserve quantity exceeds the MM sample stock ( QV 148 )
Logistical follow-up activity was not specified for all partial lots ( QV 151 )
Maintain inspection lot status (requirements) for & & ( QV 180 )
Access to inspection lot & is not allowed ( QV 181 )
Maintain inspection lot status (setting status) for & & ( QV 182 )
The synchr.update indicator is taken into account starting with Rel. 3.0 ( QV 183 )
Error during stock postings: see log ( QV 200 )
Internal error: Table TQ07M is not maintained for field & ( QV 201 )
Maintain quality score procedure & ( QV 202 )
Error during quality score calculation (-> PF1) ( QV 203 )
No characteristic results are available for inspection lot & ( QV 204 )
Share of scrap has changed; Recalculate the quality score, if necessary ( QV 205 )
Follow-up action & cannot be used ( QV 206 )
Choose a higher quality score: Lower limit: & ( QV 207 )
Choose a lower quality score: Upper limit: & ( QV 208 )
Make a usage decision before you enter the quality score ( QV 209 )
Internal error: ASSIGN field & contains errors with return code & ( QV 210 )
Follow-up action & not allowed for usage & ( QV 211 )
Posting to sample allowed only up to a lot size of & ( QV 212 )
Internal error - entry & missing from table IMSEG ( QV 213 )
Inspection is still active. Remaining sample quantity is equal to &1 &2 ( QV 214 )
Internal error - remaining quantity & to be posted was corrected to 0 ( QV 215 )
There are no characteristics for this inspection lot ( QV 217 )
Material & not maintained for plant & ( QV 218 )
Material & does not exist (check your entry) ( QV 219 )
No material documents available ( QV 220 )
Status change in Q-info record was carried out ( QV 221 )
Status in Q-info record is not changed ( QV 222 )
Confirmation number missing. Data cannot be displayed ( QV 223 )
Operation & not available for this lot ( QV 224 )
A minimum of one defect item must be selected for this function ( QV 226 )
Internal error: Entry parameter QSS1_PARTIAL_LOT_FEATURE_SHOW initial ( QV 227 )
Complete the automatic usage decision settings for results recording ( QV 525 )
Complete the automatic usage decision settings for skip lots ( QV 526 )
No change documents exist ( QV 801 )
Sample &1 cannot be processed (system error) ( QY 010 )
Print module for sample type &1 could not be found ( QY 011 )
Choose 'New with copy model' or 'Extend existing' ( QY 018 )
Sample number &1 is not in the external number range 00. ( QY 033 )
No sample type is assigned to inspection type &1 ( QY 035 )
Maintain the sample quantity completely (quantity and unit) ( QY 036 )
No samples were created for sample drawing &1 ( QY 037 )
Please confirm sample drawing &1 ( QY 040 )
Sample &1 does not have the required status ( QY 042 )
Insp. sample for last insp. lot &1 for sample &2 not yet calculated ( QY 043 )
Unit &1 cannot be converted into base unit of measure for the material ( QY 045 )
Enter either an inspection lot, order number or production version number ( QY 050 )
Usage decision has already been made for inspection lot &1 ( QY 054 )
Inspection lot &1 does not allow for an inspection of samples ( QY 055 )
Inspection type for origin 15 is not active for material &1/&2 ( QY 056 )
Internal error during label printing ( QY 057 )
No characteristic specifications found for the operation/operations ( QY 062 )
Sample drawing &1 does not belong to the current inspection lot ( QY 064 )
You are not authorized to process other samp. draw. procs. in the system ( QY 201 )
An internal error occurred during the authorization check ( QY 202 )
There is an error in the user authorization for the user record ( QY 203 )
You cannot make any more new entries ( QY 205 )
Enter a valid inspection severity ( QY 208 )
Enter a valid AQL value ( QY 209 )
Calculation according to a sampling scheme, formula, or fixed number ( QY 210 )
Enter the missing information ( QY 211 )
Error when processing long text ( QY 212 )
Error in copying a long text ( QY 213 )
You are not authorized to process this authorization group ( QY 214 )
You did not enter instructions for the first stage/primary stage ( QY 215 )
The sample drawing procedure is being used and cannot be deleted ( QY 218 )
You cannot use sample drawing procedure & ( QY 224 )
Define the sample drawing procedure & ( QY 225 )
Error during update of change documents ( QY 228 )
Use the transaction & to avoid data inconsistencies ( QY 229 )
An entry already exists with the same key ( QY 231 )
Sampling scheme &1 cannot be used in sample-drawing procedure ( QY 232 )
Lot &1: No sample-drawing items found for sample-drawing procedure &2, &3 ( QY 303 )
Sample determination: No sample drawing item found ( QY 304 )
Samp. determination: Data missing for no. of containers and lot container ( QY 307 )
Sample drawing item no longer exists ( QY 308 )
Total size of all material samples is greater than the lot size ( QY 309 )
More than one sample-drawing item was found for operation &1 ( QY 310 )
Formula must determine a number of samples greater than 0 ( QY 313 )
Overflow during sample determination ( QY 314 )
InfoSource has not been maintained in source system ( R! 041 )
Update mode & is not supported by the extractor ( R! 042 )
Template for generic extractor does not exist ( R! 043 )
Error & when generating extraction call ( R! 044 )
Sum of data element lengths is too long ( R! 230 )
Data element for IO has been changed. There will be consequences ! ( R! 851 )
No main card defined for card type &1 ( R$ 013 )
Company code &1 fm card &2 not equal to company code &3 from main card &4 ( R$ 018 )
No main card maintained for card type &1 in company code &2 ( R$ 028 )
Normal vendor cannot be derived from data file or master record ( R$ 035 )
Specify a processor ID ( R$ 038 )
Card type in incoming file incorrect ( R$ 043 )
More than one main card number in incoming file ( R$ 044 )
No main card number in incoming file ( R$ 045 )
Settlement date in incoming file is missing or not unique ( R$ 048 )
No authorization for card document with card &1 &2 ( R$ 071 )
You have no authorization for the selected activity ( R$ 080 )
Card type &1 not defined ( R$ 090 )
Data record &2 &3 &4 blocked by user &1 ( R$ 222 )
Data record &1 &2 &3 has already been posted ( R$ 223 )
The key date must not be in the future ( R$ 300 )
Unable to recover the hierarchy of transaction (&1) ( R- 005 )
Object reference in elementary category could not be read ( R- 008 )
You can select only fictitious or simulated generic transactions here ( R- 015 )
You can select only fictitious or simulated generic transactions here ( R- 016 )
The generic transaction has to contain at least one elementary category ( R- 018 )
Hierarchy of the generic transaction is inconsistent ( R- 019 )
Assign simulation runm & an identifier consisting of letters and numbers ( R- 021 )
A version must be valid for at least a day ( R- 337 )
For class supplements, the security ID number has to be filled ( R- 342 )
For class supplements, there has to be a reference to the ID number ( R- 347 )
Uppermost extended elementary cat. must have trans.form 300 for cat. '9' ( R- 349 )
You can use a category other than '0' for unassigned fin. objects only ( R- 351 )
Complex classes must be unique ( R- 354 )
You have already requested a version for extended generic transaction & ( R- 355 )
You are requesting a version, but have already modified the header ( R- 356 )
No further changes can be made to extended generic trans. & in MODE & ( R- 357 )
No further changes can be made to extended elem. cat. & of gen. trans & ( R- 358 )
Current version of generic trans. internal & external & is valid from & ( R- 359 )
Error while reading data; activity terminated ( R- 503 )
Error while unlocking generic transaction & ( R- 509 )
Unable to save generic transaction &; activity was canceled ( R- 511 )
Cannot display the primary transaction ( R- 517 )
You cannot create subnodes for the node selected ( R- 525 )
Unable to delete generic transaction & ( R- 528 )
Unable to delete the versions of generic transaction & ( R- 530 )
Generic transaction & has a financial object; status & not permitted ( R- 533 )
Security ID & not permitted; a complex class already exists ( R- 534 )
Unable to copy generic transaction &; it is a complex class ( R- 537 )
An error occurred when processing the primary transaction - see long text ( R- 538 )
No transaction available for display ( R- 553 )
Data records with the ID &2 were found in DB table &1 and deleted ( R- 701 )
Error while writing to database; dataset & was not saved ( R- 702 )
Input data contains data records from a different saved dataset ( R- 705 )
Input data is incomplete; see long text ( R- 707 )
Error while deleting data from database; dataset & was not deleted ( R- 708 )
Error while locking the DB tables for dataset & ( R- 711 )
Error; processing terminated ( R- 715 )
Value for the 'save with update' indicator is not valid ( R1 025 )
Value &1 is invalid for the indicator 'save mode' ( R1 030 )
Value &1 is Invalid for indicator 'Display initial screen' ( R1 032 )
The stated object type &1 does not correspond to valid object type &2 ( R1 049 )
Update of Variable Node was Not Carried Out ( R1 068 )
Authorization group was updated successfully (see long text) ( R1 074 )
The number specified is in the critical area of number range &1 ( R1 081 )
The specified number is the last in number range &1 ( R1 082 )
No more numbers are free in number range &1 ( R1 083 )
Grouping & has external number assignment, enter a number ( R1 091 )
Archiving object &1 is not assigned to any application object ( R1 097 )
Number not in interval &1 - &2 ( R1 099 )
You are not authorized to display this data; see long text ( R11 002 )
Blocked data is not displayed; see long text ( R11 003 )
Business function BUPA_ILM_BF is not activated; see long text ( R11 004 )
You are not authorized to block/unblock data; see long text ( R11 005 )
You cannot change business partner &1; see long text ( R11 006 )
Standard screen sequence variant &1 may not be deleted ( R1 102 )
Activity category &1 does not exist ( R1 105 )
Application object &1: No assignment exists for BP role grouping &2 ( R1 109 )
No appropriate external grouping exists for partner number &1 ( R11 098 )
Industry system &1 not reserved for data exchange ( R11 099 )
Application object &1 was not initialized ( R1 110 )
No display variant exists ( R11 100 )
The field &1 is obsolete; do not fill it ( R111 005 )
You are not authorized to block/unblock data; see long text ( R111 022 )
ILM policy does not exist for business partner; see long text ( R111 029 )
Enter other search criteria ( R11 103 )
Business function BUPA_ILM_BF is not activated; see long text ( R111 035 )
Business activity not ended for business partner &1; see long text ( R111 038 )
Selected partners cannot be processed. See long text. ( R111 039 )
Business partner cannot be blocked; see long text ( R111 045 )
No. of max. processes exceeds no. of business partners; see long text ( R111 046 )
Error while transferring data; see long text ( R111 047 )
Resource error while transferring the data; see long text ( R111 048 )
Error while processing the business partner; see long text ( R111 049 )
No search possible ( R11 111 )
Business partner &1 does not (yet) have a GUID ( R11 147 )
Error-Tolerant Search for Business Partners is Not Possible ( R11 167 )
You are not authorized to execute report &1 ( R111 706 )
Business partner &1 has status &2 ( R11 185 )
Transaction code &1 assigned to multiple application transactions ( R1 120 )
Internet user for user &1 may not be intialized ( R11 213 )
Enter the Internet user ( R11 214 )
User &1 of user &2 blocked ( R11 223 )
Address type &1 may not be deleted ( R11 239 )
No move target address exists ( R11 242 )
No bank details exist for change ( R11 247 )
Transfer of communication data not possible ( R11 252 )
Standard industry system was changed ( R11 253 )
No APIs exist for the selected active applications ( R11 257 )
Transaction code &1 assigned more than once as a configuration activity ( R1 126 )
Validity period of the target bank details is not sufficient ( R11 265 )
Validity period not permitted; bank details are change target of ID &1 ( R11 266 )
Validity period of the target move address is not sufficient ( R11 267 )
Validity period not permitted; address is move target of other addresses ( R11 268 )
Telephone number &1 &2 ambiguous; identified using CONSNUMBER ( R11 270 )
Telephone number &1 &2 already exists ( R11 271 )
Fax number &1 &2 ambiguous; identified using CONSNUMBER ( R11 272 )
Fax number &1 &2 already exists ( R11 273 )
Teletex number &1 &2 ambiguous; identified using CONSNUMBER ( R11 274 )
Teletex number &1 &2 already exists ( R11 275 )
Telex number &1 &2 ambiguous; identified using CONSNUMBER ( R11 276 )
Teletex number &1 &2 already exists ( R11 277 )
SMTP &1 &2 ambiguous; identified using CONSNUMBER ( R11 278 )
SMTP &1 already exists ( R11 279 )
Application object &1: BP roles cannot be passed ( R1 128 )
Remote mail &1 &2 ambiguous; identified using CONSNUMBER ( R11 280 )
Remote mail address &1 &2 already exists ( R11 281 )
X.400 &1 &2 &3 ambiguous; identified using CONSNUMBER ( R11 282 )
X.400 &1 &2 &3 already exists ( R11 283 )
RFC &1 ambiguous; identified using CONSNUMBER ( R11 284 )
RFC &1 already exists ( R11 285 )
Printer &1 ambiguous; identified using CONSNUMBER ( R11 286 )
Printer &1 already exists ( R11 287 )
SSF address &1 ambiguous; identified using CONSNUMBER ( R11 288 )
SSF address &1 already exists ( R11 289 )
Application object &1: BP role groupings cannot be passed ( R1 129 )
URI address &1 ambiguous; identified using CONSNUMBER ( R11 290 )
URI address &1 already exists ( R11 291 )
Pager address &1 &2 ambiguous; identified using CONSNUMBER ( R11 292 )
Pager address &1 &2 already exists ( R11 293 )
Application object &1: Views cannot be passed ( R1 130 )
Transaction may be started only in development client ( R11 304 )
Application object &1: Applications cannot be passed ( R1 131 )
Application object &1: No standard screen sequence variant exists ( R1 133 )
Errors occurred during call of function module &1 ( R11 335 )
This language may be maintained only for persons ( R11 336 )
It is not possible to search using wildcards without specifying a country ( R11 337 )
Application object &1: No further view checks found ( R1 134 )
Time dependency of table &1 cannot be deactivated ( R11 346 )
Data set &1 for BP &2 maintained time-dependently,despite inact.time dep. ( R11 349 )
Creation of new validity period not possible ( R11 354 )
Scheduling no longer possible using the field VALDT ( R11 359 )
No central data for partner &1 in the required database activity &2 ( R11 360 )
No standard industry stated for standard industry number system &1 ( R11 410 )
No screen number and program name stated for view &1. ( R11 422 )
Application object &1: Results table of VCT usages is empty ( R11 449 )
BP role groupings must not be active for single selection ( R1 145 )
Appl. obj.&1: Results table obj.part grp. - obj.part assignment is empty ( R11 456 )
Appl. obj.&1: Results table obj.part group -scrn sequ. assignmnt is empty ( R11 457 )
Application object &1 has already been called in this LUW ( R1 147 )
Error in assignment of screen sequence using table TBZ6 ( R11 470 )
Application object &1: Read function module missing for table &2 ( R1 150 )
Changing screen is not possible ( R1 151 )
View &1 must be manually assigned to section &2 ( R11 512 )
No authorization to create partner with authorization type &1 ( R1 152 )
Client &1 appl. object &2 screen &3: Error generating dynpro container ( R11 520 )
BP role category &1 is still in use and cannot be deleted ( R11 526 )
BP view &1 is still in use and cannot be deleted ( R11 527 )
Role &1 is assigned to exclusion group &2 and must be updated ( R11 528 )
Role not updated if a role category is not assigned ( R11 529 )
No authorization to change partner with authorization type &1 ( R1 153 )
No authorization to display partner with authorization type &1 ( R1 154 )
BP role &1 may not be deleted ( R11 550 )
BP role &1 is not update-relevant ( R11 557 )
No standard assignment defined for BP role category &1 ( R11 575 )
Conflict between BP role grouping &1 and BP role exclusion group &2 ( R11 580 )
A valid BP view is not assigned to BP role &1 ( R11 581 )
Assignment of BP role &1 not permitted because of disallowed transition ( R11 586 )
Validity of BP role &1 restricted to date &2 ( R11 588 )
BP role &1 deleted (&2 is valid BP role) ( R11 589 )
You must select the Involved in maintenance or Call only indicator ( R1 160 )
Archive indicator not set for business partner &1 ( R11 600 )
Select filter and/or restrict BP selection ( R11 601 )
"All BP roles" indicator allowed only in connection with BP role category ( R11 651 )
Change type &1 of the BP role is not intended ( R11 667 )
Not all planned changes for the day activated in table &1 ( R1 168 )
Application object &1: Data sets cannot be passed ( R1 169 )
General maintenance may not be assigned ( R1 170 )
You cannot assign general maintenance to a BP role grouping ( R1 171 )
No Authorization To Delete Partner without Authorization group &1 ( R11 777 )
Control object &1: No assignment exists for application object &2 ( R1 178 )
Validity period for the address usage not compatible with address ( R11 853 )
A standard address is not always specified ( R11 854 )
Standard usage has not been maintained for all required points in time ( R11 855 )
Business partner &1 already exists in role &2 ( R1 204 )
Business partner &1 does not exist in role &2 ( R1 205 )
Make at least one register entry ( R1 211 )
Bank &2 for country &1 does not exist ( R1 218 )
Enter at least one set of bank details ( R1 219 )
Bank details &1 &2 &3 in the validity period are not unique ( R1 228 )
Business partner &1 does not exist in role &2 (differentiation &3) ( R1 229 )
Business partner &1 created in &2 roles ( R1 244 )
Business partner number &1 is not permitted ( R1 249 )
Business partner category &1 does not exist; use 1, 2 or 3 ( R1 269 )
No authorization to create partner with authorization group &1 ( R1 272 )
No authorization to change partner with authorization group &1 ( R1 273 )
No authorization to display partner with authorization group &1 ( R1 274 )
No authorization to create partner in role &1 ( R1 275 )
No authorization to change partner in role &1 ( R1 276 )
No authorization to display partner in role &1 ( R1 277 )
No relevant business partner category for all selected BP roles ( R1 278 )
Business partner cat. &1 not permitted for BP role &2 ( R1 279 )
Business partner type was changed, field selection will be adjusted ( R1 285 )
Application object &1: Field &2 is assigned to multiple field groups ( R1 302 )
ApplObj.&1: Trans. for RolCat.&2, RolCatGp &3, activ.&4 does not exist ( R1 303 )
Required field &1 has no entry ( R1 304 )
This field already assigned to field group &1 ( R1 305 )
Parameter I_DIFF_TYPE missing for parameter mode &1 ( R1 307 )
System unable to determine any relevant views ( R1 308 )
You cannot plan changes to bank master data ( R1 325 )
Business partner &1 already exists in role &2 ( R1 326 )
Changes to credit card details cannot be planned in advance ( R1 333 )
Main screen sequence &3 does not exist ( R1 363 )
Item number &1 is in customer name range ( R1 364 )
Item number &1 is in SAP name range ( R1 365 )
Deletion of generated screen sequence was canceled with errors ( R1 368 )
Tree control Cannot be Initialized ( R1 371 )
No view variant has been created ( R1 372 )
No relevant data screen exists; all fields are hidden ( R1 392 )
Field &1-&2 Not Ready for Input Due to Customizing Settings ( R1 393 )
Field &1-&2 Cannot be Scheduled ( R1 394 )
Function &1 is controlled by the field group; navigation not possible ( R1 396 )
Delete dynpro containers only if all screens are regenerated ( R1 397 )
Incorrect validity interval ( R1 403 )
Error in minimum/maximum limits & & & & ( R1 406 )
Existing validity intervals are incorrect ( R1 407 )
Business partner &1 does not exist in role &2 ( R1 424 )
BUSPCDACT no longer possible for object BUPA from Release 6.40 ( R1 439 )
Change type &1 for teletex number is not defined ( R1 441 )
Change type &1 for telex number is not defined ( R1 442 )
Change type &1 for RML mail address is not defined ( R1 443 )
Change type &1 for X.400 address is not defined ( R1 444 )
Change type &1 for RFC destination is not defined ( R1 445 )
Change type &1 for printer is not defined ( R1 446 )
Change type &1 for SSF address is not defined ( R1 447 )
Change type &1 for URI address is not defined ( R1 448 )
Change type &1 for pager number is not defined ( R1 449 )
External BP number &1 has already been assigned for business partner &2 ( R1 451 )
Partner &1 has not been created in all the relevant roles ( R1 452 )
Partner &1 has not been created in any of the relevant roles ( R1 453 )
Address is still being used and may not be deleted ( R1 455 )
Address is still being used, but can be deleted / restricted ( R1 456 )
Maintain changes to the address in the organizational unit ( R1 468 )
An active Internet user &2 does not exist for business partner &1 ( R1 470 )
Invalid value &2 for field &3 for business partner &1 ( R1 473 )
Number &2&4 is already assigned to partner &3 for ID type &1 ( R1 477 )
Validity period not allowed: Address is move target address for &1 ( R1 478 )
Address still in use; change to validity not allowed ( R1 479 )
Address is standard address; restriction to validity not allowed ( R1 480 )
Error in address &1 ( R1 482 )
Validity period incompatible with validity of address ( R1 483 )
Restricting the validity of a standard address is not allowed ( R1 484 )
The validity of the standard usage may not be restricted ( R1 485 )
Choose a target object for the move date ( R1 486 )
Assignment for field &1 in structure &2 is not possible. No data transfer ( R1 491 )
'Standard usage' not planned for standard addresses ( R1 493 )
Indicator 'standard address' no longer allowed ( R1 494 )
Addresses and/or address usages are inconsistent ( R1 495 )
Status &1 is Not Permitted for Field Group &2 ( R1 503 )
Field does not exist on the assigned subscreen ( R1 509 )
Reference table field for differentiation type element & incorrect ( R1 515 )
Section &1: Maximum number of views exceeded (upper limit is &2) ( R1 517 )
Screen &1 &2 &3: Maximum Number of Sections Exceeded (Upper Limit is &4) ( R1 518 )
Screen &1 &2 &3: Maximum Number of Lines Exceeded (Upper Limit is &4) ( R1 522 )
DiffType for BP role BP1 must be the same as DiffType for RelCat ( R1 528 )
DiffType for BP role BP1 must be the same as DiffType for RoleDefCat ( R1 529 )
DiffType for BP role BP2 must be the same as DiffType for RelCat ( R1 530 )
DiffType for BP role BP2 must be the same as DiffType for RoleDefCat ( R1 531 )
BP role &1 cannot be used ('General Maintenance' indicator set) ( R1 532 )
BP role &1 already has a higher-level BP role ( R1 540 )
BP role &1 is a higher-level BP role of &2 ( R1 541 )
Standard Industry Number System &1 Must Not be Deleted ( R1 542 )
Identification category &1 is assigned to multiple identification types ( R1 546 )
Business partner type &2 not applied; change this on the data screen ( R1 552 )
Standard credit card details must be unambiguous ( R1 571 )
Enter the business partner number or business partner GUID ( R1 581 )
Employees cannot be created in this system ( R1 582 )
User &1 already assigned to business partner &2 ( R1 583 )
Object &1: Authorization group &2 does not exist ( R1 586 )
Bank Details &1 are Still being Used and Must Not be Deleted ( R1 591 )
Bank Details &1 are Still being Used, But Can be Deleted ( R1 592 )
Payment Card &1 is Still being Used and Must Not be Deleted ( R1 593 )
Payment Card &1 is Still being Used, But Can be Deleted ( R1 594 )
The 'standard address' indicator may not be deleted ( R1 614 )
Invalid change type &1 for telephone number ( R1 617 )
Invalid change type &1 for fax number ( R1 620 )
Change type &1 of the address is not defined ( R1 623 )
Change type &1 of the Internet address is not defined ( R1 624 )
Standard address cannot be deleted ( R1 625 )
Standard address usage cannot be deleted ( R1 637 )
Address cannot be deleted due to address usages. ( R1 639 )
An address with ext.address no. = INITIAL already exists for partner &1 ( R1 641 )
Address number &1 is not unique; do not change or delete ( R1 643 )
You cannot create more than one usage for address type &1. ( R1 645 )
No other address exists for usage for address type &1 ( R1 646 )
Cannot change because multiple addresses with external number SPACE exist ( R1 648 )
Address usages for deleted address also deleted ( R1 649 )
Standard telephone numbers cannot be deleted ( R1 650 )
Standard fax numbers cannot be deleted ( R1 651 )
Address usage &1 &2 cannot be changed (standard indicator blank) ( R1 652 )
Fixed address for partner &1 does not exist; standard address is used ( R1 653 )
Address incomplete; enter the city or the P.O. box ( R1 659 )
The standard Internet address must not be deleted ( R1 660 )
The standard teletex number must not be deleted ( R1 661 )
The standard telex number must not be deleted ( R1 662 )
Standard RML address must not be deleted ( R1 663 )
The standard X.400 address must not be deleted ( R1 664 )
The standard RFC destination must not be deleted ( R1 665 )
The standard printer must not be deleted ( R1 666 )
The standard SSF address must not be deleted ( R1 667 )
The standard URI address must not be deleted ( R1 668 )
The standard pager number must not be deleted ( R1 669 )
Modus & for relationships/role definition maintenance not permitted ( R1 701 )
Partner selections are combined (correspond. search strategy) ( R1 706 )
Function module does not exist for differentiation element &1 ( R1 707 )
BP role &1 not permitted ('General Maintenance' indicator set) ( R1 708 )
Program or dynpro does not exist for differentiation element &1 ( R1 712 )
No maintenance of & & without complete differentiation ( R1 713 )
&1 &2 &3 &4 updated; no display because no longer in work area ( R1 719 )
BP role &1 not permitted for role definition category &2 ( R1 722 )
Business partner &1 does not exist in a role with diff. type &2 ( R1 725 )
Cannot create &1 &2 &3 &4 because internal number is missing ( R1 734 )
Number range interval &1 for number range object &2 incorrectly maintain. ( R1 735 )
Validity key date &1 not adhered to ( R1 736 )
BP role &1 does not have required differentiation type &2 ( R1 737 )
BP role selections are mutually exclusive ( R1 743 )
&: Generic value not permitted for & & ( R1 750 )
Effect on another validity interval; use change mode ( R1 757 )
Maximum no. of relationships (&) in this relationship set exceeded ( R1 758 )
Maximum no. of role definitions (&) in this set exceeded ( R1 759 )
No time constraint; date specifications will be ignored & & & & ( R1 760 )
Validity intervals changed & & & & ( R1 764 )
Multiple intervals changed at same time & & & & ( R1 765 )
No time constraint; &1 already exists &2 &3 &4 ( R1 773 )
Existing interval does not match time constraint & & & & ( R1 774 )
& cannot be planned ( R1 777 )
Notes cannot be planned ( R1 778 )
&2 already exists; further interval not possible &3 &4 ( R1 779 )
&1 has more validity intervals than were designated &2 &3 &4 ( R1 780 )
BP &1 already has max. no. of relships possible for this relship category ( R1 781 )
Partner &1 already has the maximum number of role definitions possible ( R1 782 )
Validity Intervals No Longer Correspond to the Time Constraint ( R1 785 )
You May Only Change Validity Dates ( R1 791 )
Cannot fill all required entry fields ( R1 792 )
Enter at Least One Change Document Type ( R1 795 )
Specifiy either all or no bank details to enter the IBAN ( R1 809 )
No central evaluation of communication data without company address ( R1 821 )
No time dependence in address data ( R1 822 )
Cannot maintain address data; display only ( R1 823 )
Cannot maintain relationship data in full ( R1 824 )
Business partner &2 is already contact person for business partner &1 ( R1 826 )
Business partner &2 is already employee of business partner &1 ( R1 827 )
Assign company address to fill all required fields ( R1 838 )
Can be edited in HR system only ( R1 839 )
Test: Company code cannot be changed from &1 to &2 ( R1 845 )
Can be edited using organization management only ( R1 846 )
SYST: Error in Module &1 &2 &3 &4 ( R1 851 )
SYST: Error in routine &1 &2 &3 &4 ( R1 852 )
SYST: Error in Function &1 &2 &3 &4 ( R1 853 )
Error during number assignment f. scheduled addresses: Obj.&1 interval &2 ( R1 854 )
Error When Inserting Table &1 &2 &3 &4 ( R1 855 )
Error When Updating Table &1 &2 &3 &4 ( R1 856 )
Error When Deleting Table &1 &2 &3 &4 ( R1 857 )
Check log: TA SLG1 with message object BDT_DYNPRO_GENERATE ( R1 861 )
Node entry is incorrect ( R1 866 )
The node entered does not exist ( R1 868 )
Do not delete this node otherwise data will be lost ( R1 869 )
Action not carried out ( R1 870 )
Data could not be loaded ( R1 871 )
More Than One Entry will be Changed With This Input Data ( R1 872 )
Additional information is only saved in the logon language ( R1 873 )
Only the additional information can be changed in a substitute node ( R1 874 )
You cannot open note object with key (&1, &2) ( R1 880 )
Note object with key (&1, &2) does not exist ( R1 881 )
Note object with key (&1, &2) has no temporary number ( R1 882 )
Field group to view assignment for current note view not found ( R1 883 )
No or multiple field groups found for view &1 of note object ( R1 884 )
Update run can only be conducted as a background run ( R1 892 )
VCT control for screen configuration does not exist ( R1 895 )
This Version of the Visual Configuration Tool is Not the Current Version ( R1 901 )
Enter a permitted value ( R2 001 )
No customer contact generated ( R2 016 )
You are not authorized for contact class &1 ( R2 027 )
Object for mandatory role &1 is missing ( R2 035 )
More than one object was specified for role &1; this is not permitted ( R2 036 )
The number of days must be at least 100 ( R2 039 )
Entry &1 &2 &3 does not exist in &4; check your entries ( R2 058 )
Enter a valid value in field &1 ( R2 071 )
No number range could be determined for object &1 ( R2 302 )
Number &1 is not in number range &2 (object &3) ( R2 307 )
Number range &1 (object &2) is in the critical area ( R2 308 )
Caution: Number range &1 (object &2) has reached the upper limit ( R2 309 )
Number range &1 (object &2) does not exist ( R2 310 )
No numbers were requested (number range &1, object &2) ( R2 312 )
Number &1 (object &2) contains impermissible characters ( R2 313 )
&1 &2 &3 &4 has been deleted ( R2 531 )
The function 'Select' is not supported for contact classes ( R2 770 )
The request IDoc contains an invalid segment & ( R3 001 )
Target system & is not known in the source system. ( R3 002 )
Error & when sending an IDoc ( R3 003 )
Object type & is not defined in the source system ( R3 004 )
InfoSource & is not defined in the source system. ( R3 005 )
InfoObject & is not defined in the source system ( R3 006 )
No transfer structure is available for InfoSource & in the source system ( R3 007 )
Error in call of the extraction program ( R3 008 )
The extraction program does not support object & ( R3 009 )
Selection criterion & is missing in the data request ( R3 010 )
Update mode & is not supported by the extraction API ( R3 011 )
InfoObject & does not support hierarchies ( R3 012 )
The transfer structure for object & must be regenerated ( R3 013 )
Domain & cannot be used for data extraction ( R3 015 )
DataSource &1 has to be replicated (time stamp, see long text) ( R3 016 )
Request IDoc does not contain any segments ( R3 017 )
Error & when starting the extraction program ( R3 019 )
Request IDoc does not contain any language information ( R3 026 )
Error & when generating the data transfer program ( R3 027 )
Transfer structure & for InfoSource & does not contain any fields ( R3 028 )
No extract structure exists for object & in the source system ( R3 029 )
Incomplete control parameters for communication with the BW system ( R3 030 )
DataSource &1 does not support IDOC transfer ( R3 031 )
Error in a parallel process for sending data ( R3 032 )
Error when determining the transfer IDoc ( R3 033 )
View & cannot be used for data extraction ( R3 034 )
Data request does not contain any hierarchy names ( R3 036 )
Transfer structure field not contained in DataSource ( R3 037 )
RFC user logon failed. Check connection &1 ( R3 077 )
InfoSource & does not exist in source system & ( R3 101 )
Name of transfer structure & in BW does not match name of srce systm & ( R3 102 )
When deleting transfer structure & in source system & errors occurred ( R3 103 )
Error when creating transfer structure & in source system & ( R3 104 )
Error when assigning transfer structure & to IDoc type & ( R3 105 )
IDoc type & does not exist in source system & ( R3 106 )
Transfer structure & does not exist in IDoc type & (&) ( R3 107 )
Dictionary error when creating transfer structure & in source system & ( R3 108 )
Activation error of transfer structure & in source system & ( R3 109 )
InfoSource & has no transfer structure in source system & (error) ( R3 110 )
InfoSource & does not have a transfer structure in source system & ( R3 111 )
System prefix of the transfer structure & is in the SAP name range ( R3 112 )
System prefix of the transfer structure & is in customer name range ( R3 113 )
Source system release & is not compatible with extractor release & ( R3 114 )
Error when generating the message type for transfer structure & ( R3 115 )
Missing entry in RSMDDELTA for basic characteristic & or error in entry ( R3 116 )
Delta transfer for basic characteristic &: Unknown field & ignored ( R3 117 )
Incorrect object type & passed to function & ( R3 118 )
No suitable entries found for text view & in structure & ( R3 120 )
Error in delta generation & ( R3 121 )
Unable to delete program & in source system & ( R3 123 )
ALE message type & is not active ( R3 124 )
No name could be determined for the ALE message type ( R3 125 )
Logical system name has been changed for this system ( R3 206 )
SAP BW client & is not the same as your logon client & ( R3 207 )
System manipulation!!! ( R3 208 )
No RFC dest.parameters maintained for the Warehouse & in source system & ( R3 220 )
The basic IDoc type & is already available ( R3 221 )
Logical system & exists already ( R3 222 )
No connection between Warehouse & and source system & ( R3 223 )
Process code & is not known across the system ( R3 224 )
Name & of client & is not the same as the name & of the Warehouse ( R3 225 )
ALE change pointers are not set up correctly ( R3 226 )
Select at least one archive file ( R3 251 )
Extractor for DataSource &1 cannot be called up ( R3 252 )
No authorization for DataSource &1 ( R3 325 )
Warnings have appeared when extracting data ( R3 401 )
Information has been derived from data extraction ( R3 402 )
No active transfer structure exists in source system &1 for DataSource &2 ( R3 412 )
Direct access is not supported for hierarchy DataSource &1 ( R3 415 )
Project: & - & ( R3_OLR3_DMS 003 )
Project: & - & Version number: & ( R3_OLR3_DMS 004 )
& - & / Collaboration: & & ( R3_OLR3_DMS 005 )
& - & / Header: & / Item: & ( R3_OLR3_DMS 006 )
& - & & ( R3_OLR3_DMS 007 )
& & ( & & ) ( R3_OLR3_DMS 008 )
No number range found for object &1 ( R5 006 )
&1 &2 &3 not maintained in language &4 ( R5 017 )
Database inconsistency city &1, notify system administrator ( R5 055 )
More than twelve entries in table ADRDYCONTR ( R5 058 )
Database inconsistency city &1, notify system administrator ( R5 060 )
Database inconsistency city &1, notify system administrator ( R5 065 )
Database inconsistency street &1, notify system administrator ( R5 071 )
Number range &1 has incorrect number assignment ( R5 079 )
Database inconsistency street &1, notify system administrator ( R5 081 )
Postal code different from postal code in district (&1) ( R5 082 )
You have not specified a city ( R5 501 )
City number &1 in country &2 does not exist ( R5 502 )
Internal error: City name for city &1 country &2 language &3 missing ( R5 505 )
Internal error: Street name for street &1 country &2 language &3 missing ( R5 506 )
Street number &1 in country &2 does not exist ( R5 507 )
Postal code &1 in country &2 is not permitted for delivery ( R5 511 )
Postal code &1 in country &2 is not permitted for P.O. boxes ( R5 513 )
Postal code &1 in country &2 is not permitted for major customers ( R5 514 )
Only PO Box postal code or company postal code allowed ( R5 515 )
Postal code &1 &2 is not assigned to a city ( R5 516 )
City &1 does not exist in country &2 ( R5 517 )
Postal code &1 does not match city name &2 in country &3 ( R5 518 )
You have not specified a street ( R5 519 )
Street &1 does not exist in city &2 ( R5 520 )
Postal code &1 is not permitted for city &2 in country &3 ( R5 521 )
Region &1 does not match district name &2 in country &3 ( R5 523 )
Street &1 in country &2 contains invalid city &3 ( R5 527 )
Postal code &1 in country &2 is assigned to nonexistent city number &3 ( R5 528 )
No city numbers exist for postal code &1 in country &2 ( R5 529 )
District &1 does not match city name &2 in country &3 ( R5 530 )
Street &1 does not match city name &2 in country &3 ( R5 531 )
Postal code &1 does not match street name &2 in country &3 ( R5 532 )
Postal code &1 is not valid for street &2 in city &3, correct: &4 ( R5 535 )
Postal code &1 is not valid for house number &2 &4, correct: &3 ( R5 536 )
Street or part of street indicates another district (&1) ( R5 537 )
District &1 in country &2 contains invalid city &3 ( R5 540 )
District &1 is not compatible with street name &2 in country &3 ( R5 541 )
PO Box &1 is invalid, it is not in any interval of city &2 &3 ( R5 542 )
Postal code &1 is incorrect; the correct postal code is &2 ( R5 543 )
City &1 has no different postal city, so moved to field 'City' ( R5 544 )
City &1 has no different postal city, so city &2 deleted ( R5 545 )
City &1 has postal city &2, so &1 put in 'Diff. res. city' ( R5 547 )
Invalid BW namespace definition -> See long text ( R7 003 )
InfoProvider &1 is inconsistent; reactivate ( R7 005 )
InfoObject &1 is inconsistent; repair ( R7 006 )
Cannot repair InfoObject &1 (SIDs already exist) ( R7 007 )
InfoObject &1 not converted correctly ( R7 008 )
Name &1 is not in the namespace for BW meta objects ( R7 011 )
Name &1 in the partner namespace is invalid; correct form: /ABC/DEF ( R7 016 )
Namespace '&1' is not a valid BW namespace ( R7 017 )
Name &1 is not in the namespace for generated BW meta objects ( R7 019 )
Char.&1 has vers.&2 hierarchy; hierarchies must remain version-dependent ( R7 020 )
Characteristic &1 cannot be a master data InfoSource ( R7 029 )
Characteristic &1 is a geocharacteristic. Coordinate attribute added. ( R7 031 )
Characteristic &1. Enter GIS attribute. ( R7 032 )
Char. &1 is of geographical type &2: Changed to 'with master table'. ( R7 033 )
Geo-characteristic &1 is not activate or has the wrong geographical type ( R7 034 )
Characteristic &1: only &2 InfoObjects are allowed in the compounding ( R7 035 )
Table &1: error creating index &2 (&3) ( R7 038 )
Characteristic &1: Navigation attribute &2 deleted (possibly converted) ( R7 039 )
Field name &1 is longer than &2 (&3 cannot be used for authorizations) ( R7 040 )
Characteristic &1 has conversion routine; extension not allowed ( R7 041 )
Characteristic &1: Extension can be problematic ( R7 042 )
InfoObject &1 is inconsistent (it is new and still flagged as active) ( R7 044 )
Characteristic &1: The &2 is new and must be filled with data ( R7 045 )
Characteristic &1: The coordinate attributes were deleted ( R7 046 )
Characteristic &1: Time-dependent &2 '&3' not buffered ( R7 047 )
&1 can only be manually activated in client &2 ( R7 048 )
Characteristic &1 is a BOR object: Attribute 0SOURSYSTEM added ( R7 049 )
Incoming / outgoing / or changed stock of key figure &1 not found ( R7 051 )
InfoObject &1 is new - please activate first ( R7 059 )
InfoObject &1 is not active ( R7 060 )
InfoObject &1 deactivated ( R7 061 )
Characteristic &2: Cannot edit attribute &1 in master data maintenance ( R7 065 )
Characteristic &1: Master data has to be activated before conversion ( R7 067 )
Characteristic &1 has no master data but is an export DataSource ( R7 071 )
Characteristic &1: Assigned InfoArea &2 does not exist->NODESNOTCONNECTED ( R7 072 )
Characteristic &1: Navigation attribute &2 does not exist for char. &3 ( R7 078 )
Characteristic &1 is not an InfoProvider; InfoArea / nav. attr. deleted ( R7 079 )
No source system ID exists for source system (logical system) &1 ( R7 087 )
The attributes from characteristic &1 also used for characteristic &2 ( R7 101 )
Object name &1 must be alphanumeric ( R7 110 )
Only InfoObjects from system type &1 can be edited ( R7 113 )
You can only maintain display attributes with referenced chararact. &2 ( R7 128 )
No suitable standard domain found (type &1, length &2) ( R7 129 )
Default value &1 set for the reference field ( R7 131 )
Reference characteristic is deleted (both aggregations agree) ( R7 132 )
Navigational attribute &1 has the same description as characteristic &3 ( R7 135 )
Navigational attribute &1 has same description as nav. attribute &3 ( R7 136 )
Characteristic &1 (in compound from char. &2) is not available ( R7 139 )
Compound with char. &1 produces a total length of &2 (maximum is &3) ( R7 143 )
InfoObject &1 is deliverd by SAP as &2 (please rename) ( R7 147 )
Characteristic &1 requires &2 (is transferred to the compund) ( R7 148 )
InfoObject &1 still used in &2 &3 ( R7 154 )
InfoObject &1 used in compounding of or as in/out flow of &2 ( R7 155 )
Error/warning in dict. activator, detailed log --> Detail ( R7 159 )
First change attribute &1 with characteristic &2 to navigation attribute ( R7 163 )
The name &1 is already used for a characteristic ( R7 164 )
Enter characteristic &1 or one of the referencing characteristics ( R7 173 )
InfoObject &1 must also be transferred as an attribute of char. &3 ( R7 179 )
Characteristic &1 does not have any master data (or any texts) ( R7 189 )
There are no tables to be converted ( R7 190 )
Error &2 with function module &1 (&3) ( R7 195 )
Master data tables must be converted - activate characteristics ( R7 197 )
All saved InfoObjects already active (or locked) ( R7 198 )
Transfer routine can only be maintained with the referencing char. &2 ( R7 208 )
Be careful! You are editing objects delivered by SAP. ( R7 217 )
InfoObject &1 is of incorrect system type &2 ( R7 218 )
Save InfoObjects first ( R7 219 )
Characteristic &1 is not actively available ( R7 220 )
Error/warning in Dictionary deleter; detailed log --> detail ( R7 230 )
Schedule the table to be converted as background processing (->long text) ( R7 236 )
InfoSource &1 already exists. Rename it. ( R7 237 )
Characteristic &1: Hierarchy structure has become time dependant ( R7 238 )
Characteristic &1 bearing hierarchies: Max. length with compounding: &2 ( R7 239 )
Characteristic &1 must equally be a navigation attribute of char. &3 ( R7 240 )
Characteristic &1: Small case letters were set to 'not allowed' ( R7 241 )
Warning!! Deleting the block can lead to inconsistencies!! ( R7 246 )
InfoObject &1 is a protected system field ( R7 248 )
A query element with technical name &1 already exists ( R7 251 )
InfoObject &1 is still being used in DataStore object &2 ( R7 252 )
The transfer routine for characteristic &1 is o.k. ( R7 253 )
InfoObject &1 is used in transfer rules (&3) of characteristic &2 ( R7 256 )
The DataSources of char. &1 do not have attributes (or do not exist) ( R7 264 )
Enter the field name in the text view ( R7 269 )
The transfer routine of active version of InfoObject &1 was transferred ( R7 271 )
The transfer routine of InfoObject &1 is locked by the CTO ( R7 272 )
Transfer routine of InfoObject &1 could not be saved in the order ( R7 273 )
Transfer routine of InfoObject &1 succesfully saved ( R7 274 )
Error while saving transfer routine of InfoObject &1 ( R7 275 )
Object status of the selected InfoObjects was set to inactive ( R7 277 )
The (default) values for the aggregation have been reset ( R7 278 )
InfoObject &1 is locked by the Change and Transport Organizer ( R7 279 )
You do not have authorization to read Program Builder ( R7 280 )
You must not delete any rows from the pairing of InfoObject &1 ( R7 281 )
InfoObject &1 is already active ( R7 282 )
InfoObject &1 is referenced - cannot change data type to DATS or TIMS ( R7 284 )
Characteristic &1: Attribute &3 compounded to &2 has a diff. time-dpdncy ( R7 285 )
InfoObject &1 is copied from the revised version ( R7 287 )
Caution ! The saved version of InfoObject &1 is being compared ( R7 289 )
InfoObject &1: Transfer routine copied from version &2 into version &3 ( R7 290 )
Warning! The saved version of InfoObject &1 is being merged ( R7 291 )
InfoObject &1 still being used in DataSore object &2 (contains data) ( R7 292 )
Characteristic &1: Cannot add attribute &2 directly into compounding ( R7 296 )
InfoObject &1 has dependent InfoObject &3 for invalid component &4 ( R7 297 )
Characteristic &1: Key figure &2 and unit &3 - inconsist. time-dependency ( R7 303 )
Error when writing object &1 &2 in the ObjectCatalog (TADIR) ( R7 306 )

Length: 930399 Date: 20191022 Time: 011519

Count: 3734     sap01-206 ( 2024 ms ) This documentation is copyright by SAP AG.

Our Service

Looking for Support? Questions?

The

Consolut

Callback-Service

Leave us your contact details and we will call you back. Panels marked with * are mandatory.