Messages

Complete Message Docu Documentation From 1J076 up to 3O316

This documentation is copyright by SAP AG.
Count: 2810 Skipped: 3
Message Docu
Description
Return order &3 for item &2 posted, item in postprocessing ( 1J 076 )
Return order &3 for item &2 posted, item transferred to PT ( 1J 077 )
Balance in payment order not zero. Please check customizing ( 1J 078 )
No Customizing of amount authorization for product &2, trans. type &3 ( 1J 079 )
Payment order &2 posted in bank area &1 - communication error ( 1J 080 )
For transaction type &1 more than one offsetting trans. type determined ( 1J 081 )
Negative amounts not allowed in Customizing; Correct your entry ( 1J 082 )
Enter another primary selection ( 1J 090 )
Selection area for account numbers too big; Restrict your selection ( 1J 091 )
Data selection terminated after &1 records ( 1J 092 )
Enter a selection condition ( 1J 093 )
Data selection terminated after &1 payment orders ( 1J 094 )
Return order &1 posted with all items ( 1J 095 )
Return reason &1 posted, item in postprocessing ( 1J 096 )
Return order &1 posted, item transferred to PT ( 1J 097 )
Return order &2 in bank area &1 transferred for release ( 1J 098 )
Return not possible as posting balance not cleared ( 1J 099 )
Recipient transaction type is missing ( 1J 102 )
&1 cannot be converted to &2 ( 1J 104 )
Return order &1 posted - communication error ( 1J 105 )
Payment order &2 in bank area &1 released - communication error ( 1J 106 )
Payment item &1 in bank area &2 in queue for posting later ( 1J 120 )
& items were not processed ( 1J 122 )
No tolerance period maintained in bank area &1 for forward orders ( 1J 131 )
Cannot reject release for payment order &1 bank area &2 ( 1J 152 )
User cancelled the release ( 1J 165 )
Payment order &2 posted in bank area &1; See long text for transfer info. ( 1J 181 )
The maximun number of direct debit orders has been reached ( 1J 241 )
PO &2 in bank area &1 and its payment items sent to PTS ( 1J 280 )
PO &2 in bank area &1 sent to PTS; See long text for transfer information ( 1J 281 )
PO &2 in bank area &1 sent to PTS; Communication error ( 1J 282 )
PO &1, bank area &2, acct &3 and its payment items sent to PTS ( 1J 283 )
PO &1, bank area &2, acct &3 sent to PTS; PIs still to be sent to PTS ( 1J 284 )
PO &1 in bank area &2, acct &3 sent to PTS; Communication error ( 1J 285 )
Standing order &1 deleted - display only possible ( 1J 305 )
Standing order &1 flagged for deletion - changing not possible ( 1J 308 )
The next run date does not correspond to the period data ( 1J 323 )
SWIFT code &1 does not match bank country &2 or bank key &3 ( 1J 514 )
Enter missing values for transaction type &1 ( 1J 571 )
Select the 'SendTo PTS' checkbox ( 1J 572 )
SEPA Ordering party customizing not maintained for transaction type &1 ( 1J 573 )
Missing customizing for transaction type &1 and mandate type &2 ( 1J 574 )
Enter the mandate reference ( 1J 604 )
Enter the creditor ID ( 1J 605 )
Status of mandate &1 is not active ( 1J 606 )
Global lock defined for creditor ID &1 ( 1J 607 )
Mandate &1 is not valid on posting date &2 ( 1J 610 )
The BP of the ordering party &1 does not match the BP of mandate &2 ( 1J 618 )
Mandate check enabled for ordering party transaction type &1 ( 1J 620 )
The mandate &1 is obsolete ( 1J 622 )
Mandate type &1 cannot be used with offsetting transaction type &2 ( 1J 623 )
Customer validation of BIC and IBAN failed ( 1J 624 )
Enter a due date that is after the due date &1 of the first collection ( 1J 625 )
Account currency should be EUR for collection with SEPA payment method ( 1J 628 )
Mandate &1 not valid on due date &2 calculated based on posting date &3 ( 1J 631 )
Calculated due date based on closure dt &1 must be after 1st coll.date &2 ( 1J 632 )
Mandate &1 is not valid on planned closure date &2 ( 1J 633 )
Mandate &1 is not valid on due date &2 based on planned closure date &3 ( 1J 634 )
Calculated due date based on posting dt &1 must be after 1st coll.date &2 ( 1J 635 )
SDD checks use posting date &1 as planned closure date not entered ( 1J 636 )
Mandate checks use posting date &1 as planned closure date not entered ( 1J 637 )
Due date &1 falls on a non-working day ( 1J 645 )
Processing days missing in Customizing for payment method &1 ( 1J 646 )
Posting date &1 is before the earliest posting date &2 ( 1J 647 )
Posting date &1 is after the latest posting date &2 ( 1J 648 )
Earliest posting date &1 is after latest posting date &2 ( 1J 651 )
The SEPA direct debit order cannot be posted until &1 ( 1J 652 )
Next run date &1 is after the latest posting date &2 ( 1J 653 )
Next run date &1 before the earliest posting date &2 ( 1J 654 )
Error in calculating next run date and due date for subsequent run ( 1J 657 )
Latest posting date could not be determined for due date &1 ( 1J 660 )
Backdated posting is not allowed for SEPA direct debit orders ( 1J 661 )
Error occurred during calculation of next run date and due date ( 1J 664 )
The earliest possible due date is &1 for posting date &2 ( 1J 670 )
Enter a valid due date that considers the setting for maximum days of &1 ( 1J 671 )
Enter a valid due date that considers the minimum days of &1 ( 1J 672 )
The latest due date for posting date &1 can be &2 ( 1J 673 )
A SEPA order cannot be created for an account not managed in euro ( 1J 674 )
Prenote could not be created ( 1J 675 )
The prenote is not for a credit transaction ( 1J 676 )
More than one active implementation of BAdI BADI_BKK_POPOSTPROC_DISPLAY ( 1J 677 )
More than one active implementation of BAdI: Validation of IBAN and SWIFT ( 1J 679 )
Error preparing data for enrichment (MGUID = &1) ( 1J 701 )
Error mapping enrichment data (MND &1, UCI &2, PO_MGUID/MVERS &3/&4) ( 1J 702 )
Error sending enrichment data to external system ( 1J 703 )
Error updating mandate frequency (MND = &1, UCI = &2, MGUID = &3) ( 1J 705 )
There is no default offsetting transaction type for transaction type &1 ( 1J 730 )
IBAN &1 is not maintained in the recipient account for BP &2 ( 1J 800 )
Medium &1 already exists in client &2 ( 1K 003 )
More than one medium is flagged as internal medium ( 1K 004 )
No medium is flagged as internal medium ( 1K 005 )
&1 payment orders cannot be used to create SEPA direct debits ( 1K 008 )
No transaction type defined for transaction type &1 and return reason &2 ( 1K 023 )
Transaction type &1 already exists in client &2 ( 1K 025 )
No transaction type may be used for account closure ( 1K 026 )
The transaction types for account closure are incomplete ( 1K 027 )
The transaction types for account closure are not clear ( 1K 028 )
Format & does not exist ( 1K 102 )
No text is maintained in language &2 for transaction type &1 ( 1K 124 )
No interest is calculated for transaction type &1 ( 1K 125 )
No guaranteed amount is allowed for transaction type &1 ( 1K 126 )
Correspondence cannot be generated; see long text ( 1K 855 )
Cannot create correspondence request for account &1; see long text ( 1K 857 )
Enter recipient details for correspondence type &1 ( 1K 858 )
Select Print Change Correspondence to create correpondence request ( 1K 863 )
Reference limit &1 &2 &3 &4 does not exist ( 1L 003 )
External limit is bigger than internal limit ( 1L 007 )
Limit date is before last balancing date ( 1L 013 )
Delete indicator set for limit ( 1L 018 )
Limit: Interval must end before date of currency conversion ( 1L 027 )
Limit currency &1 is not allowed - please check the entry ( 1L 035 )
Interest compensation limits must be maintained for root account ( 1L 042 )
Changing reference limits in the past can cause problems ( 1L 050 )
For account &1 there are still unreleased limits ( 1L 060 )
Enter values in all required fields to define a default &1 ( 1L 067 )
Next balancing date &1 is in the past. It has to be after &2. ( 1M 012 )
You have entered balancing type & twice ( 1M 017 )
No entry for bank statement exists for account number & / bank area & ( 1M 022 )
No business transaction code exists for transaction type & ( 1M 026 )
Posting date for balancing postings already set at &1 ( 1M 031 )
Bank Statement Creation could not be started ( 1M 035 )
Bank area changed; Default the balancing posting date ( 1M 038 )
Mass run cannot be started (see long text) ( 1M 046 )
Recipient entries for balancing posting for account closure missing ( 1M 051 )
Capital yield tax being calculated for at least one account ( 1M 054 )
W: Accounts in bank area &1 blocked by end of day processing ( 1M 065 )
Accounts in bank area &1 blocked by end of day processing ( 1M 100 )
Balancing: Key date is before posting date. Changes not allowed ( 1M 128 )
Upgrade of table &1 failed ( 1M 148 )
Inserting new entries in table &1 failed ( 1M 150 )
Account &1 (bank area &2) being edited by end of day processing run ( 1M 166 )
Error during conversion of object &1 &2 ( 1M 169 )
A P.O. box address was selected for account &1, bank area &2 ( 1M 173 )
Required field period not entered for time period &1 ( 1M 185 )
Restart end of day processing chain &1 &2 not possible ( 1M 188 )
Next execution date &1 cannot be changed ( 1M 203 )
Account balancing not yet executed - changing not possible ( 1M 208 )
No due date can be determined for account &1, bank area &2 ( 1M 209 )
Account no. &1, company code &2 was still active on key date &3 ( 1M 211 )
Bank statement: Balance unequal for account &1, BkSt no. &2, bank PoAr &3 ( 1M 216 )
Receiver change to cpd-account &1 &2 ( 1M 222 )
No authorization for execution of report &1 ( 1M 300 )
Job &1, &2 cannot be started on instance &3 ( 1M 501 )
Cannot combine the time periods of account balancing w. term balancing ( 1M 700 )
No Customizing amount authorization for account type &2, trans. type &3 ( 1N 001 )
Customizing for bank area &1, product &2, trans. type &3 incomplete ( 1N 003 )
Negative amounts not allowed in Customizing; Correct your entry ( 1N 004 )
Error in Customizing; See long text ( 1N 005 )
Release not possible, must be done by another user ( 1N 009 )
Payment item transferred to legacy system via balance carry forward ( 1N 020 )
Payment item transferred to legacy system via item transfer ( 1N 021 )
All payment items or orders that are not archived are displayed ( 1N 075 )
Payment items with posting date before &1 may have been archived ( 1N 076 )
Enter a valid payment method; cannot use medium &1 as a payt method ( 1N 081 )
Report for posting planned item is locked, execution failed ( 1N 096 )
Report for curr. conversion of planned item is locked, execution failed ( 1N 098 )
Payment orders with posting date before &1 may have been archived ( 1N 150 )
Cannot create the payt order as payt method &1 is relevant to SEPA ( 1N 172 )
Number of payment notes cannot exceed &1 for payment note format &2 ( 1N 173 )
No. of characters in payt notes cannot exceed &1 for payt note format &2 ( 1N 175 )
Enter a valid payt method for process &1,not payt method relevant to SEPA ( 1N 178 )
Enter the transaction type ( 1N 180 )
Report for curr. conversion of forward order is locked, execution failed. ( 1N 195 )
Report for posting forward order is locked, execution failed ( 1N 196 )
Business partner is not maintained for bank key &1 ( 1N 206 )
Business partner &1 does not exist in the role of account holder ( 1N 207 )
You cannot reset the "Bank Is Creditor" checkbox ( 1N 209 )
Account holder &1 has a creditor ID ( 1N 210 )
Enter signature city ( 1N 212 )
Cannot change from RBD to BCA IVA in a production system ( 1N 250 )
Before changing from RBD to BCA IVA, check if the prerequisites are met ( 1N 251 )
Cannot activate RBD; Post the planned IVA entries in bank area &1 ( 1N 252 )
Cannot activate RBD; Execute balance sheet preparation in bank area &1 ( 1N 253 )
Cannot use the BCA IVA feature when the RBD solution is active ( 1N 258 )
Before changing from BCA IVA to RBD, check if the prerequisites are met ( 1N 265 )
Cannot activate BCA IVA; Post planned IVA entries in RBD ( 1N 266 )
Enter a unique combination of Company Code &1 and Logical Destination &2 ( 1N 301 )
Enter a unique combination of Logical Destination &1 and Model View &2 ( 1N 302 )
Mandate sender &1 is not account holder &2 ( 1N 513 )
Mandate recipient &1 is not account holder &2 ( 1N 514 )
Enter a suitable combination of bank area, account number, and IBAN ( 1N 518 )
Account &1 has at least one active and valid mandate ( 1N 519 )
Account &1 has at least one active and valid mandate ( 1N 520 )
Return not possible as no recipient can be determined ( 1P 113 )
Release for payment item &1, bank area &2 cannot be rejected ( 1P 143 )
Transfer item to an external account is not allowed. ( 1P 146 )
Transaction type '&1': +/- sign does not concur with legacy system ( 1P 157 )
Payment item with external reference number &1 is already updated ( 1P 161 )
Process '&1' does not exist ( 1P 172 )
For process &1 and transaction type &2 you cannot delete/reverse ( 1P 173 )
Posting date &1 is within the period flagged for archiving ( 1P 209 )
Value date '&1' is within the period flagged for archiving ( 1P 210 )
Archiving detailed balancing data no longer possible ( 1P 211 )
Posting date is not in the past ( 1P 212 )
Posting date is not in the future ( 1P 213 )
Value date is outside the allowed range &1 to &2; enter a valid date ( 1P 215 )
Incorrect account currency '&1' in field ACUR (account currency is '&2') ( 1P 258 )
System error: Importparametererror in function module &1 ( 1P 461 )
No status was transferred for payment item &1 &2 &3 ( 1P 507 )
DI: Interest penalty attribute in data record does not match account ( 1P 514 )
A record with the number &1/&2/&3 already exists ( 1P 559 )
Paymnet note no. &1 is longer than the permitted &2 characters ( 1P 581 )
Payment note no. &1 is valid ( 1P 582 )
No data could be determined for process '&1' ( 1P 681 )
Error occurred during processing of standing orders ( 1P 804 )
'Suspend from' is before next execution ( 1P 814 )
Standing order not executed as minimum amount dropped below ( 1P 835 )
Changing of transaction type with DI oder BAPI_CHANGE is not allowed ( 1P 837 )
The recipient does not match the defined payment details ( 1P 849 )
Files are already being imported currently ( 1PAYMINEX 014 )
Error during check of payment order &1 (see long text) ( 1PAYMINEX 016 )
Payment order &1 has the wrong currency (see long text) ( 1PAYMINEX 017 )
The header information of the EFT file is not changeable (see long text) ( 1PAYMINEX 052 )
Payment order &2 in bank area &1 - all items posted ( 1Q 100 )
EDI partner for bank area & and account number & cannot be determined ( 1Q 200 )
EDI partner cannot be determined - several bank state. recipients exist ( 1Q 208 )
Error during creation of a payment request ( 1Q 211 )
Error during creation of internal payment order ( 1Q 212 )
Error While Creating a Payment Request ( 1Q 213 )
Transaction &1 does not support netting ( 1Q 351 )
Select at least one field ( 1Q 352 )
No payment order found ( 1Q 353 )
No payment item found, payment order &1 is skipped ( 1Q 354 )
Warning: Posted payment order found, run in display mode ( 1Q 355 )
No authorization for payment order &1 ( 1Q 356 )
No payment note found ( 1Q 357 )
Error in posting payment order &1 ( 1Q 358 )
Error in recalculation of payment order &1, item &2 ( 1Q 359 )
Error during pre-posting/parking payment order &1 ( 1Q 360 )
No payment order to be edited; report skipped ( 1Q 361 )
Error when converting to equivalent currency in netting ( 1Q 362 )
No posting date for bank area &1 ( 1Q 363 )
Error when searching for account names ( 1Q 364 )
Error when preparing the netting report ( 1Q 365 )
No sender/recipient for payment order &1 ( 1Q 366 )
Dsiplay varient does not exist for program &1 ( 1Q 367 )
Bank area for In-house cash not configured correctly ( 1Q 368 )
Error in foreign currency split for payment order &1 ( 1Q 369 )
Payment order update completed ( 1Q 370 )
Error: A further copy of the program is running for bank &1 ( 1Q 373 )
Runtime error when setting block for bank &1 ( 1Q 374 )
Runtime error during authorization check for the posting ( 1Q 375 )
Error when displaying the ALV grid ( 1Q 376 )
Automatic currency swap is not supported for several recipients ( 1Q 400 )
Endless loop in the definition of route &2 in bank area &1 ( 1Q 401 )
General error in route determination for bank area &1 ( 1Q 402 )
Route &2 in bank area &1 has been defined incorrectly in Customizing ( 1Q 403 )
Bank &1 &2 in bank area &3 is not an In-House Cash Center ( 1Q 404 )
Error in route definition in clearing account &3, bank area &1 ( 1Q 405 )
Clearing accounts in bank area &3 have different account currencies ( 1Q 406 )
At least one clearing account is missing in route &1 in bank area &2 ( 1Q 407 )
Error in recipient bank &3 in bank country &2 or in bank area &1 ( 1Q 408 )
Route has not been fully defined in bank area &1 ( 1Q 409 )
In route &1 an external bank has been entered as the executing IHC Center ( 1Q 410 )
Error during currency swap in bank area &1 ( 1Q 411 )
Incorrect combination of bank area and bank key of the IHC Center ( 1Q 412 )
Error occurred while saving the reversal table BCAREVPO ( 1Q 413 )
The generated payment orders will not be posted (rollback) ( 1Q 414 )
Posting of payment request (payment method) terminated ( 1Q 415 )
Payment order &2 in bank area &1 and derived orders have been posted ( 1Q 416 )
Payment order &1/&2 must be reversed using report RBCAREVPO ( 1Q 417 )
The original payment order has not yet been reversed ( 1Q 418 )
Payment order &1 in bank area &2 has already been reversed ( 1Q 419 )
Payment order &1 must be reversed with report &2 ( 1Q 420 )
Table entry for TIBAN cannot be created ( 1Q 430 )
Key field not filled in route determination &2 in bank area &1 ( 1Q 500 )
Required field not filled in route &2 in bank area &1 ( 1Q 501 )
The executing bank in route &2 is not an In-House Cash Center ( 1Q 502 )
&1 account statement was sent by in-house cash center &2 ( 1Q 552 )
&1 Company code &2 of &3 is not the same as co. code &4 of acct statement ( 1Q 553 )
The document is locked by user &1 ( 1R 002 )
Error in calling web browser on your frontend ( 1R 003 )
&1 is not permitted as a derived category since it is a logical category ( 1R 020 )
&1 is not permitted as a logical category since it is a derived caregory ( 1R 021 )
Category &1 can only be derived from a logical category ( 1R 022 )
Repository &1 has document area &2 ( 1R 023 )
Repository &1 has no document area ( 1R 024 )
System could not retrieve component information ( 1R 201 )
Error when calling front-end services ( 1R 203 )
System could not retrieve file list for a directory ( 1R 204 )
File system will not allow file to deleted ( 1R 205 )
System cannot delete a file ( 1R 206 )
File system will not allow directory to be deleted ( 1R 207 )
System could not delete a directory ( 1R 208 )
System could not create a directory ( 1R 209 )
File system refused access to a directory ( 1R 210 )
System cannot start the application for file extension &2 ( 1R 211 )
System cannot find the application for file extension &2 ( 1R 212 )
Error occurred when calculating document class for a document ( 1R 213 )
Error when calculating description texts for a document ( 1R 214 )
Error when writing description texts for a document ( 1R 215 )
No standard content repository exists ( 1R 301 )
Standard contents repository is not a file server ( 1R 302 )
RFC destination & is currently locked ( 1R 305 )
Source and target categories link to different repositories ( 1R 311 )
Table &1 field &2 points nonexistent table &4 for &3 ( 1R 317 )
Error while resolving URL &1 ( 1R 360 )
Error while determining LOIOs for PHIO (&1, &2) ( 1R 361 )
Error while reading the expiry time of the object (&1, &2) ( 1R 362 )
Error while reading the indicator "individual expiry time" (&1, &2) ( 1R 363 )
Error while determining the parent of the object (&1, &2) ( 1R 364 )
Error while writing the expiry time of the object (&1, &2) ( 1R 366 )
Error while determining the subnode of the object (&1, &2) ( 1R 367 )
Error while determining the URL of the object (&1, &2) ( 1R 371 )
Transport file could not be deleted from file server ( 1R 404 )
Transport file could not be copied to file server ( 1R 405 )
No connection to RFC destination &1 ( 1R 446 )
System termination on file server ( 1R 447 )
No subsequent handling required for transport ( 1R 454 )
Table &1 for document contents does not exist ( 1R 462 )
Inconsistenciees in the management data for document class &1 ( 1R 476 )
Inconsistencies in the management data for document distribution ( 1R 477 )
Missing documents when recovering categories ( 1R 479 )
Document contents could not be deleted ( 1R 538 )
Error while calling operation &4 for storage system &3 ( 1R 541 )
Storage system &3 reports error while executing operation &4 ( 1R 542 )
Document forced out of shared memory ( 1R 548 )
Document had to be regenerated, cause: &3 ( 1R 549 )
Content repository &1 is accessed using the application server ( 1R 550 )
Colliding alias names for document files ( 1R 554 )
System error in RFC call of function module &1 ( 1R 555 )
Communication error in RFC call of function module &1 ( 1R 556 )
Content-Type &1 is not permitted ( 1R 557 )
Document with status "protected" has no component information ( 1R 558 )
Error indexing a document ( 1R 559 )
Error determining category attributes for index space ( 1R 560 )
Unknown index space for document class &1 ( 1R 561 )
Error in deindexing ( 1R 562 )
Error starting and registering RFC server &1 ( 1R 563 )
Error stopping and deregistering an RFC server ( 1R 564 )
No authorization to access physical information object ( 1R 565 )
Error writing from R/3 System to an FTP server ( 1R 566 )
Error reading from an FTP server to R/3 System ( 1R 567 )
Language &1 is not supported by the current application server ( 1R 568 )
Language (&1, &2) is not specified consistently ( 1R 569 )
Invalid file name &1 ( 1R 571 )
Text line for planned text table too long ( 1R 572 )
No document area free for web server assignment ( 1R 573 )
Web Server &2 assigned to document area &1 ( 1R 574 )
Unspecific exception when calling &1 ( 1R 575 )
Error determining component lengths ( 1R 578 )
An error occurred when calling module &1 ( 1R 579 )
No Header Table Can Be Determined for Relationship Class &1 ( 1R 581 )
SSF information for SAP user &1 not found ( 1S 021 )
Password check delayed. Try again. ( 1S 024 )
SSF kernel error: external library "SAPSECU" not installed ( 1S 351 )
SSF kernel error: install new version of SAPCRYPTOLIB ( 1S 352 )
An extended parameter has an invalid value ( 1S 360 )
Transaction PSEMAINT is no longer supported ( 1S 400 )
Choose server ( 1S 402 )
PSE does not exist in database ( 1S 406 )
PSE not distributed through database ( 1S 407 )
Standard values entered in table for empty fields ( 1S 415 )
Error reading own certificate ( 1S 420 )
User locked ( 1S 521 )
User not in validity period or password initial ( 1S 530 )
Certificate response does not match PSE ( 1S 540 )
Incomplete certificate chain ( 1S 541 )
Select at least one field ( 1S 652 )
Object type &1 does not have a &2 method ( 1W 002 )
Attribute &1 for object type &2 has no DDIC reference ( 1W 005 )
You cannot delete the primary key ( 1W 008 )
Data element &1 is already used in key &2 for object type &3 ( 1W 009 )
Data element &1 identifies object type &2 ( 1W 010 )
No input fields found for transaction &1 ( 1W 012 )
Default created for key definition ( 1W 014 )
Object relation for &1 is deactivated (cannot be transported) ( 1W 015 )
No free data element found for domain &1 ( 1W 018 )
No initial screen found for transaction &1 ( 1W 020 )
Key field &1 not found ( 1W 023 )
Object name in SPRTL0 not correct ( 1W 026 )
Internal data type contains errors: field &1 &2 ( 1W 033 )
Data changed -> check and save ( 1W 034 )
Length of data element &1 differs from length of key field &2 ( 1W 035 )
Supertype &1 is still used in objects ( 1W 039 )
Key definition of &1 is incompatible with supertype &2 ( 1W 040 )
Object key in supertype &1 is inconsistent ( 1W 042 )
&1 cannot be used (interface) ( 1W 045 )
Call by function module; field assignment cannot be defined ( 1W 046 )
Assign a prefix for the function module ( 1W 049 )
Object type &1 is released, maintenance not possible ( 1W 050 )
Data element &1 is assigned to more than one supertype ( 1W 055 )
Data element &1 is assigned to more than one object type ( 1W 056 )
Check the parameter settings for the function modules ( 1W 061 )
No authorization to execute the object query ( 1W 062 )
Error in the specified object relation ( 1W 063 )
Error when reading the linked objects ( 1W 064 )
Source object type &1 unknown or inactive ( 1W 066 )
Target object type &1 unknown or inactive ( 1W 067 )
Caution: the target object type is the same as the source object type ( 1W 071 )
Object type &1 is obsolete in Release &2 ( 1W 072 )
No linked objects found ( 1W 073 )
Attributes with multiple values are not fully supported ( 1W 074 )
First activate the object ( 1W 075 )
Transaction &1 cannot be used for Drag&Relate (EWT/IAC) ( 1W 076 )
Service &1 is already assigned to object &2 (service type: &3) ( 1W 077 )
No fields with search help found (dynpro &1 &2) ( 1W 102 )
Object type &1 is already assigned directly to transaction &2 ( 1W 106 )
No (collective) search help found for transaction &1 ( 1W 108 )
No data found for object type &1 (transaction &2) ( 1W 110 )
Search help &1 not found (object &2, transaction &3) ( 1W 111 )
Dynpro field &1 not found (object &2, transaction &3) ( 1W 112 )
Field &1 not defined in search help &2 (object &3, transaction &4) ( 1W 113 )
No search help was selected for object &1 and transaction &2 ( 1W 114 )
Select a dynpro field with search help ( 1W 115 )
Object &1 transported in SAP mode, now activate manually ( 1W 152 )
Automatic activation switched off, object &1 not activated ( 1W 153 )
Object &1 currently locked by user &2, no activation ( 1W 154 )
Linked object type &1 is not active ( 1W 155 )
Function module &1 not found ( 1W 158 )
No key definition found for object &1 ( 1W 159 )
Function module &1 also used by object &2 ( 1W 160 )
Interface description generated for function module &1 ( 1W 161 )
Parameter &1 invalid for prefix &2 ( 1W 162 )
Data element &1 activated (for object or supertype &2) ( 1W 163 )
No active version of object &1 found, only display mode possible ( 1W 164 )
Data element &1 deactivated (for object type or supertype &2) ( 1W 165 )
Caution when setting the transport mode (see the long text) ( 1W 166 )
Object &1 does not exist in target system; activation not necessary ( 1W 167 )
Object relation deactivated for &1 (attribute &2) ( 1W 169 )
Function module &1 deactivated ( 1W 171 )
Read module parameter settings modified ( 1W 173 )
No function specified for supertype &1 ( 1W 175 )
No SAP version of object &1 found, only display mode possible ( 1W 176 )
Service &1 (type &2) not found ( 1W 179 )
Linked object type &1 has not been released ( 1W 180 )
Field &1 not found in infoset &2 ( 1W 181 )
Index for transactions with search help not found ( 1W 183 )
Select an elementary search help ( 1W 184 )
You cannot maintain the delivery version ( 1W 186 )
No detailed information on &1 available ( 1W 187 )
&1 generated queries deleted ( 1W 188 )
Caution, activation running in test mode ( 1W 194 )
Modified object &1 will be overwritten ( 1W 199 )
No server information for local object URL generation ( 1W 200 )
Package &1 assigned to component &2 ( 1W 201 )
No objects for transport found ( 1W 202 )
SPORTAL5 not allowed in include's original system -> test mode ( 1W 206 )
You can only modify the default version ( 1W 207 )
The specified node type cannot be used for this structure type ( 1X 012 )
Create the function module & for the link type "&" ( 1X 022 )
No node types are assigned to this structure type ( 1X 041 )
The structure type could not be activated ( 1X 055 )
Select a structure that was generated by manual selection ( 1X 074 )
Insertion of subnode not possible: Node refers to (sub-) structure ( 1X 082 )
Caution: The referenced structure cannot be transported ( 1X 083 )
No subnodes can be created for this node ( 1X 089 )
Creating or changing a link object is not possible here ( 1X 090 )
Not all selected nodes could be moved ( 1X 096 )
The selected nodes could not be moved ( 1X 097 )
No nodes have been selected for the filtering ( 1X 101 )
Text table definition errors & (see long text) ( 1X 112 )
Table & has no transport object (see long text) ( 1X 113 )
Caution: The original language of the structure is & (editing lang.: &) ( 1X 115 )
Do not enhance the structure in its original system ( 1X 124 )
Enhancement repairs must be repeated in their original system ( 1X 125 )
Only select nodes with enhancement ID & ( 1X 126 )
The substructure does not exist: Expand is not possible ( 1X 130 )
The selected structure cannot be displayed ( 1X 131 )
Package check error. See long text ( 1X 133 )
Package check error. See long text ( 1X 134 )
Package check error. See long text ( 1X 135 )
Error saving the test plan ID in the table 'SQACYCLE' ( 1X 138 )
Select at least one node ( 1X 140 )
Tree Control inconsistent - Delete mode ( 1X 142 )
The tree could only be partially expanded for performance reasons ( 1X 143 )
You cannot insert under this node ( 1X 146 )
You cannot cut out different node types ( 1X 147 )
The processing is in the background ( 1X 154 )
Seet performance note about comparing big structures ( 1X 170 )
Generating filter &1. Display only ( 1X 182 )
Node has subnodes with enhancement ID <> '&1'. It cannot de deleted ( 1X 193 )
The displayed structure contains unassignable nodes ( 1X 196 )
Modifiable enhancement IDs released ( 1X 230 )
None of the displayed enhancement IDs is modifiable ( 1X 231 )
Delete enhancement ID '&1' in your source system ( 1X 237 )
Piece list for objects 'SHI3' or 'SHI6' is incomplete ( 1X 350 )
Request &1 cannot be changed; editing canceled ( 1X 353 )
PFS is used by & in "change" mode ( 20 003 )
Unable to start PFS for plant & and planning tool & ( 20 005 )
Unable to delete the lock entry ( 20 008 )
User & is currently processing the planning data in the PFS ( 20 009 )
Unable to find start program & for PFS ( 20 017 )
Unable to find background job for master data download ( 20 020 )
Unable to find background job for transaction data download ( 20 021 )
Different logical systems for project definition &1 ( 2054ALE 001 )
Different logical systems for WBS element &1 ( 2054ALE 002 )
WBS element &1 already exists for project definition &2 ( 2054ALE 003 )
WBS element: &1. 'SaveReplica' method was not called up via ALE ( 2054ALE 004 )
Project definition &1 'SaveReplica' method was not called up via ALE ( 2054ALE 005 )
No receiver system could be determined for project &1 ( 2054ALE 013 )
Cannot delete WBS element &1, Project &2 distributed in other systems ( 2054ALE 014 )
Transaction is only allowed in the project master system ( 2054ALE 020 )
Assignments to WBS element only allowed in the WBS master system ( 2054ALE 021 )
Assignments to project definition only allowed in WBS master system ( 2054ALE 022 )
Different logical system for order &1 ( 2075ALE 001 )
Order &1 can not be changed in the current system &2 ( 2075ALE 002 )
Order &1 did not yet have the "Released" status. ( 2075ALE 005 )
No receiver system could by determined for order &1 ( 2075ALE 006 )
Order master system differs from current logical system ( 2075ALE 007 )
Enter additional selection criteria ( 2075ALE 008 )
Master system of distributed order &1 either not correct, or not filled ( 2075ALE 011 )
Order &1 has an incorrect order category ( 2075ALE 012 )
Order &1 is locked ( 2075ALE 013 )
Either enter the order/order type, or a selection variant ( 2075ALE 014 )
Document & & & & already exists ( 25 003 )
Distribution order could not be started (internal error) ( 25 041 )
Special characters & and & not allowed ( 25 044 )
Recipients cannot be displayed (internal error) ( 25 046 )
Recipient exists in more than one recipient list ( 25 047 )
There is no recipient list for & with the given context ( 25 049 )
You do not have the authorization to display recipient lists ( 25 052 )
You do not have the authorization to change recipient lists ( 25 053 )
You do not have the authorization to create recipient lists ( 25 054 )
Initial order & could not be created ( 25 056 )
There is no recipient list with context & for the document ( 25 058 )
Partial order has been included in distribution order & ( 25 059 )
Context & is invalid ( 25 060 )
Error occurred whilst determining new distribution order ID ( 25 061 )
You have not entered a partial order ( 25 062 )
Reason for the distribution has not been entered correctly ( 25 065 )
Select a distribution list or an organizational unit ( 25 072 )
At least one recipient already exists in the recipient list ( 25 073 )
Partial order <&> is not available ( 25 076 )
Error whilst determining new distribution order package ID ( 25 077 )
Error whilst determining new partial order ID ( 25 078 )
You have not entered a distribution order package ID ( 25 081 )
Distribution order package ID <&> is not available ( 25 082 )
No recipient has been copied ( 25 085 )
Distribution initiation type has not been copied ( 25 086 )
No Workflow has been started for the partial order <&> ( 25 088 )
Error occurred when package was being sent ( 25 091 )
You cannot enter a distribution type for this recipient ( 25 102 )
No authorization to distribute documents of type &. ( 25 104 )
File & could not be copied to the application server ( 25 105 )
File & cannot be accessed ( 25 108 )
Error when determining file name on application computer ( 25 111 )
Error occurred when distribution order was being initiated ( 25 114 )
Distribution type & has not been defined ( 25 115 )
Only partial orders with the status ER, IG, WO, and WR are allowed. ( 25 117 )
Distribution order parameters being determined from Customizing tables ( 25 118 )
You have not entered a distribution point ( 25 119 )
Please only choose partial orders in a distibution order or package. ( 25 121 )
Error when event 'ReSend' was created ( 25 122 )
Status "BD" (bundled) could not be set ( 25 124 )
Status 'IW' (being processed) could not be set ( 25 125 )
Only partial orders with status AS, MA, ER, WO, or WR are allowed ( 25 126 )
There are no partial orders with the status 'AS' ( 25 127 )
Only partial orders with the status AS, MA, and ER are allowed ( 25 128 )
Status 'PC' could not be set ( 25 133 )
No original application files have been made available ( 25 139 )
Error occurred when the global directory was being determined ( 25 140 )
Package has been transferred to the communication interface for distribtn ( 25 142 )
Original & is not available (please choose another original) ( 25 144 )
REcipient does not support distribution type & ( 25 145 )
Error occurred when the distribution order status was being saved ( 25 157 )
You are not allowed to use personal distribution lists ( 25 160 )
You do not have the authorization to confirm output ( 25 164 )
You do not have the authorization to confirm receipt ( 25 165 )
You do not have the authorization to display the distribution log ( 25 166 )
You do not have the authorization for the 'Ignore' function ( 25 167 )
You do not have the authorization to start the distribution manually ( 25 168 )
You do not have the authorization to restart the distribution ( 25 169 )
You do not have the authorization to delete recipient list ( 25 170 )
Recipient list was created by & (you cannot delete it) ( 25 172 )
Sent to an external address ( 25 176 )
You do not have the authorization to display the generated mail ( 25 190 )
Distribution point & & does not exist ( 25 191 )
No distribution type has been defined for communication type & ( 25 192 )
Error occurred whilst determining the URL for access to ITS server ( 25 194 )
This combination of parameters is not allowed ( 25 195 )
You do not have the authorization to access the original ( 25 196 )
Original file & is of length 0 ( 25 198 )
No plotter has been defined for the recipient ( 25 200 )
No printer has been defined for the recipient ( 25 201 )
You must name an output device for distribution type & ( 25 204 )
Standard recipient list &3 already exists for the document &1 &2 ( 25 208 )
Recipient list & is already being edited by & ( 25 209 )
Document is currently being edited in another recipient list ( 25 211 )
Distribution point & does not support communication type &. ( 25 212 )
Only choose partial orders with the status 'MA' or 'AS'. ( 25 213 )
Choose only partial orders that belong to an initial order ( 25 216 )
Choose only partial orders that belong to a distribution order ( 25 217 )
An error occurred during package output ( 25 219 )
You can only choose partial orders in a package ( 25 223 )
Only partial orders with status ER, IG, WO, WR and OK are allowed ( 25 224 )
The partial order has been restarted. Initial order & has been created. ( 25 225 )
Distribution point & & does not support communication type & ( 25 226 )
No plotter has been defined for recipient & ( 25 227 )
No plotter has been defined for distribution point & & ( 25 228 )
You must enter the communication type for the distribution point ( 25 230 )
No authorization to start the distribution for document & & & &. ( 25 232 )
Document parts and versions suggested by system. Please check! ( 25 233 )
Not yet sent to recipient ( 25 235 )
The original is not accessible online ( 25 239 )
The original is managed by an external DMS ( 25 240 )
Logical system for the client & is not defined ( 25 241 )
Orginizational unit/distribution list <&> contains no recipients ( 25 242 )
Several orginizational units/distibution lists contain no recipients ( 25 243 )
No original with the application &1 maintained for the document ( 25 245 )
The reutrn date & is not in the future ( 25 246 )
No additional data is maintained for the inital order ( 25 247 )
The printer you entered & can not be used for plotting ( 25 249 )
No distribution type is defined/active for plotting ( 25 250 )
You have no authorization to delete temporary files ( 25 254 )
Plotter job & queued ( 25 256 )
Document already exists ( 26 002 )
Document &1 does not exist ( 26 003 )
No user master exists for this user ( 26 004 )
Version number not supported for document type & ( 26 005 )
Version assigned automatically for document type & ( 26 006 )
Status type not valid ( 26 007 )
No previous status allowed for status type ( 26 008 )
Abbreviation & for status not maintained ( 26 009 )
Status & is a primary status ( 26 010 )
Status (&) & does not follow status (&) & ( 26 011 )
The status set requires a previous status ( 26 012 )
Document type & can only be assigned numbers internally ( 26 014 )
Only external or mixed number assignment supported for document type & ( 26 015 )
Special character * not supported ( 26 018 )
Number range & is not an internal number range ( 26 019 )
& already allocated - further assignments ignored ( 26 020 )
With this status, only existing objects can be assigned ( 26 021 )
Number range object & not found ( 26 022 )
Number range & not defined ( 26 023 )
Number range & is not an external number range ( 26 025 )
Document number & is not within external number range & ( 26 026 )
CAUTION: critical point in number range & has been reached ( 26 027 )
CAUTION: The last number in number range & has been assigned ( 26 028 )
Document hierarchy is recursive ( 26 032 )
Document hierarchy is recursive from &/&/&/& ( 26 033 )
Document does not have a hierarchy ( 26 034 )
Status does not allow you to change certain data ( 26 035 )
You are not authorized for & with document type & ( 26 036 )
You are not authorized for authorization group & ( 26 037 )
You are not authorized for status & document type & ( 26 038 )
Status & not defined for document type & ( 26 039 )
You are not authorized to set deletion indicators for doc. type & ( 26 040 )
Superior document cannot be same document ( 26 042 )
You are not authorized for activity & document type & ( 26 043 )
Version assignment not supported for document type & ( 26 044 )
Document & is locked by & ( 26 045 )
System locking error ( 26 046 )
No long text exists ( 26 047 )
You can only copy from a document with the same document type ( 26 048 )
Document assignments copied ( 26 049 )
Document type & does not allow you to assign to object & ( 26 050 )
Document number not in form & ( 26 051 )
Document type & only allows a 1:n assignment to & ( 26 052 )
Document was created via CAD system ( 26 054 )
Status of status type "0" not defined ( 26 055 )
Not all assignments can be copied ( 26 056 )
No documents found for change number & ( 26 057 )
Do not enter document type generically ( 26 059 )
Your terminal & is not defined ( 26 060 )
Object links not supported for document type & ( 26 061 )
Data carrier type & and application & - application type & not defined ( 26 062 )
Data carrier & cannot be accessed online ( 26 063 )
No applications exist ( 26 065 )
You cannot display application ( 26 066 )
Network address & of your computer is not maintained ( 26 068 )
Change number locked by & ( 26 069 )
For document type & links to & are not supported ( 26 070 )
When the document is changed, status must be changed ( 26 071 )
Hierarchy below document contains documents which are not released ( 26 072 )
You cannot set another status currently ( 26 074 )
Document cannot be deleted - already used ( 26 075 )
The document is marked for deletion ( 26 076 )
No object links defined for this document type ( 26 077 )
Special characters & not allowed ( 26 078 )
No main parameters were entered - risk of timeout ( 26 081 )
Data carrier type & not defined ( 26 083 )
Workstation application & not defined ( 26 084 )
Document & locked by & (object link not possible now) ( 26 085 )
CAD system & not defined ( 26 086 )
Data carrier & not defined ( 26 087 )
Only values from 0 to 7 allowed for version number increments ( 26 088 )
Values from 1 to 5 and blank allowed for type of number assignment ( 26 089 )
Enter AScEx when entering screen number ( 26 090 )
Enter program exit for document number (NumExit) ( 26 091 )
Number & not in external number range ( 26 093 )
Number & not in internal number range ( 26 094 )
Enter complete document key ( 26 099 )
Archive function error ( 26 100 )
Kernel function error ( 26 101 )
Error in communication table ( 26 102 )
No entry in TCLO for object & ( 26 103 )
Error uploading & ( 26 106 )
File & cannot be opened ( 26 107 )
Archive storage not supported for document type & ( 26 109 )
No screen source maintained for object & ( 26 112 )
Previous status not found ( 26 113 )
Invalid entry ( 26 114 )
Enter value for version number increment (VersNumIncr.) ( 26 115 )
No entries found for status log ( 26 116 )
New version created ( 26 117 )
Original cannot be displayed on this terminal (& type &) ( 26 118 )
Data for application & cannot be put in archive & (& &) ( 26 119 )
Document has SAP objects assigned ( 26 120 )
Start authorization for application & not set ( 26 121 )
Entry with "*" not allowed ( 26 123 )
Not a valid SAP object ( 26 124 )
Special characters & and & not allowed ( 26 125 )
Indicator cannot be set/deleted not possible (documents exist) ( 26 126 )
New version copied from & & & & ( 26 127 )
Error uploading & ( 26 128 )
Error downloading & ( 26 130 )
Document is marked for deletion ( 26 131 )
Revision levels already exist for & / & / & ( 26 134 )
There is no access path from your front end to data carrier & ( 26 135 )
File & could not be accessed ( 26 136 )
Document was not created by copying ( 26 137 )
No vault defined ( 26 140 )
Document not archived (content version not possible ( 26 142 )
No content version can be displayed for this log entry ( 26 143 )
Document & inserted ( 26 144 )
SAP archiving for document type & maximum & bytes: file has & bytes ( 26 145 )
Programm & cannot be accessed ( 26 147 )
Status in Engineering Change Mgmt cannot be set to "complete" ( 26 151 )
You cannot set the deletion indicator (document is used &) ( 26 152 )
Revision level maintenance not active in system ( 26 156 )
Vault path not maintained ( 26 159 )
You cannot delete the document type, because it is still in use ( 26 160 )
The document has reservations for Engineering Change Management ( 26 161 )
No valid program found for & ( 26 162 )
Function "&" not possible if network address is "DEFAULT" ( 26 163 )
Each text record must be preceded by a document info record ( 26 164 )
There must be a document info record before each object allocation record ( 26 165 )
There must be a document info record before each classification record ( 26 166 )
There must be a classification record before each assigned values record ( 26 167 )
Document type '&' not defined ( 26 168 )
Document number modifier cannot contain only figures ( 26 170 )
Each long text record must be preceded by a text record ( 26 173 )
Version with change number & becomes valid in the future ( 26 174 )
File & was not copied ( 26 175 )
Reservations for other change numbers exist ( 26 177 )
Update error: table & function & return code & ( 26 178 )
Document type & does not support additional object links ( 26 182 )
RFC connection to source system & is not defined ( 26 187 )
Error while converting short text & ( 26 195 )
You must set an audit indicator and lock status for digital signature ( 26 196 )
The "Change completed" indicator is not set for any status ( 26 197 )
Parameter for C function missing ( 26 200 )
Connection to & failed ( 26 201 )
User & not allowed on computer & ( 26 202 )
FTP connection to &: binary mode cannot be set ( 26 203 )
RFC to program SAPFTP failed ( 26 205 )
Invalid FTP handle ( 26 206 )
FTP subcommand: local error ( 26 207 )
Internal error in SAPFTP ( 26 208 )
FTP subcommand: server returns error ( 26 209 )
RFC destination & could not be created ( 26 210 )
RFC destination & not defined ( 26 211 )
SAPFTP could not be installed ( 26 212 )
If expected DIR's are not found in result, increase 'Max Number of Hits' ( 26 217 )
No document links have been copied ( 26 225 )
Error while checking in and storing: & ( 26 253 )
Document is processed by user &. Edit possible only after a status change ( 26 255 )
Object does not exist ( 26 260 )
No authorization for changing additional data of the object link ( 26 262 )
Deletion not possible, original is being used in other documents ( 26 263 )
You cannot delete file & on the frontend ( 26 265 )
Status can only be set when all originals are stored ( 26 269 )
You cannot delete the active content version ( 26 270 )
Content version created using audit status cannot be deleted ( 26 271 )
You can only assigned two originals for document type &1 ( 26 272 )
Entry & already exists ( 26 275 )
Function & is not avialable for documents of the document type & ( 26 277 )
Error while updating short texts (table: DART) ( 26 278 )
Additional file & cannot be accessed ( 26 279 )
No content versions are supported for the application & ( 26 281 )
The SAP object & allows only one document link ( 26 285 )
You have no authorization for the link to SAP object & ( 26 287 )
The link to SAP object & is not allowed for document type & ( 26 288 )
No authorization for &1 with document type &2 and status &3 ( 26 290 )
No folder information fo &1 available ( 26 295 )
An error occured while creating the original attribute for &1 ( 26 296 )
An error occured while creating additional file &1 &2 ( 26 298 )
The Knowledge Provider is using document type &1 as a storage system ( 26 300 )
&1 is not valid as a file name nor path name for additional files ( 26 305 )
Cannot create content version for &1 ( 26 306 )
Error while calling the EAI Viewer ( 26 313 )
There is no entry in Customizing for document type & and application & ( 26 351 )
No office application for logical application & found ( 26 352 )
The link & already exists in the database ( 26 355 )
This function is not activated in Customizing for object &1. ( 26 356 )
Signatures have been initiated using CJ Package ( 26 358 )
Error while creating search engine index ( 26 411 )
Could not upload all files; see long text ( 26 518 )
No files were uploaded; see long text ( 26 519 )
Authorization group & does not exist ( 26 887 )
Lab/Office & does not exist ( 26 892 )
Internal error: & (FM: &, exception: &) ( 27 000 )
Internal error: & (FM: &, exception: &) ( 27 100 )
No configuration has been initialized yet ( 27 301 )
No syntax errors were found &1 ( 28 000 )
Error in syntax check &1 ( 28 002 )
Dependency cannot be checked because there are too many errors ( 28 004 )
Invalid character ( 28 011 )
Missing quote mark ( 28 012 )
Missing comma ( 28 015 )
Expression too long ( 28 016 )
Semicolon missing ( 28 017 )
Error: remaining part of expression cannot be interpreted ( 28 021 )
Error: no source code entered ( 28 022 )
Error in syntax check for simple condition ( 28 023 )
Syntax error in simple action/procedure ( 28 024 )
Syntax error in constraint ( 28 025 )
Syntax check for rule found errors ( 28 026 )
Comparison operator required ( 28 031 )
Alphanumeric operator required ( 28 032 )
Link operator "=" required ( 28 033 )
Boolean expression expected ( 28 034 )
Key expected ( 28 035 )
Object variable expected ( 28 036 )
Logical expression required ( 28 037 )
Numeric expression required ( 28 038 )
Alphanumeric expression required ( 28 039 )
Language element &1 only allowed in procedures ( 28 040 )
Condition entered is inconsistent ( 28 041 )
Partial condition not allowed: NOT SPECIFIED &1&2 ( 28 042 )
Partial condition not allowed: NOT TYPE_OF ( 28 043 )
Partial condition not allowed: NOT &1 = ... ( 28 044 )
Partial condition not allowed: &1 <> ... ( 28 045 )
Reference characteristic expected ( 28 046 )
Partial condition not allowed: NOT PART_OF ( 28 047 )
Simple condition without variables not allowed ( 28 048 )
Characteristic &1 is not restrictable ( 28 049 )
Characteristic is multiple value &1 ( 28 050 )
Reference to characteristic required ( 28 051 )
No characteristic: &1 ( 28 052 )
&1 is not a single-value characteristic ( 28 053 )
&1 is not a multiple-value characteristic ( 28 054 )
&1 is not a numeric characteristic ( 28 055 )
Characteristic &1 not alphanumeric ( 28 056 )
Reference to object required: &1 found ( 28 057 )
Characteristic not valid for class (&1)&2: &3 ( 28 058 )
Characteristic not valid for object &1: &2 ( 28 059 )
Partial condition not allowed: NOT &1 &2 ( 28 060 )
Reference to a class/object required ( 28 061 )
Invalid object type: &1 ( 28 062 )
Reference to object $ROOT, $PARENT or $SELF required ( 28 063 )
Class (&)& not valid ( 28 064 )
Syntax error in class entry: expression required in form <(...)...> ( 28 065 )
Invalid combination of object identifier/class type: (&1)(&2) ( 28 066 )
Object name expected in parantheses ( 28 068 )
Partial key expression <formal_param> = <partial_key> expected ( 28 069 )
Invalid key for object type &1 ( 28 070 )
Object reference/variable used more than once: &1 &2 ( 28 071 )
Characteristic reference/variable used more than once: &1 &2 ( 28 072 )
Object does not exist ( 28 073 )
Error in object key entry &1 for object type &2 ( 28 074 )
Character string expected in quotation marks ( 28 075 )
Key too long: &1. Maximum length &2. ( 28 076 )
Key for object type &1 incomplete ( 28 077 )
Description for object key too long: &1 ( 28 078 )
Key word missing or incorrect: &1 expected ( 28 081 )
Keyword incorrect: closed with ':' ( 28 082 )
Reserved name &1 invalid as key/variable name ( 28 084 )
Invalid variable name &1 ( 28 085 )
Formal parameter &1 not valid for: &2 ( 28 086 )
Data type error: formal parameter &1 is of type &2 ( 28 087 )
Error in standard dependency: &1 ( 28 091 )
Invalid value &1 for characteristic &2 ( 28 101 )
Variable declaration for object expected ( 28 102 )
Value &1 has no subordinate values ( 28 103 )
Invalid value &1 for characteristic &2 with class/object &3 ( 28 104 )
Invalid value &1 for parameter &2 in table/function &3 ( 28 105 )
Value &1 has subordinate values ( 28 106 )
Invalid value &1 for parameter &2 ( 28 107 )
Error in predefined function &1 ( 28 109 )
Keyword RESTRICTION: expected ( 28 110 )
Error in 'PART_OF'/'SUBPART_OF' dependency ( 28 111 )
Error in table/function argument &1 ( 28 112 )
Error in table/function declaration ( 28 113 )
Error in generic function module interface (ABAP): &1 ( 28 114 )
Error in conditional restriction (with IF) ( 28 116 )
Restriction not possible: expression not linear ( 28 117 )
Duplicate entry &1 in the allowed values for characteristic &2 ( 28 118 )
Table/function does not allow inference of values ( 28 121 )
Multiple-value formal parameter &1 in table/function &2 ( 28 122 )
Formal parameter &1 in table/function &2 is restrictable ( 28 123 )
Current parameter &1 in table/function &2 is multiple value ( 28 124 )
Inference of default value for &1 in table/function not possible ( 28 125 )
Required formal parameter missing for inference in &1 ( 28 126 )
No values can be inferred for action/procedure ( 28 127 )
Net complete - constraint/rule cannot be entered in net ( 28 130 )
Constraint has too many value assignment alternatives: &1 ( 28 131 )
Inference for characteristic variable &2 (facet &1) not possible ( 28 132 )
Restrictable and other characteristics cannot be inferred simultaneously ( 28 133 )
Dependency cannot be compiled: reason #&1 ( 28 135 )
Characteristic variable &2 (facet &1) is declared but not used ( 28 136 )
Object variable &1 is declared but not used ( 28 137 )
Char. variable &2 (facet &1) does not appear in the execution section ( 28 138 )
Object variable &1 does not appear in the execution section ( 28 139 )
Incorrect BOM item number &1 ( 28 141 )
Expression has incorrect length &1. Length &2 was expected ( 28 142 )
Table &1 does not exist ( 28 151 )
Function &1 is not declared ( 28 152 )
ABAP function module does not exist ( 28 156 )
ABAP function module is not activated ( 28 157 )
&1: expected facet &2, found &3 ( 28 160 )
&1: expected <inferbl> facet, found &3 ( 28 161 )
&1: expected Boolean facet, found &2 ( 28 162 )
&1: expected facet ALL_OFFERS or ALL_REQUIRES, found &3 ( 28 163 )
&1: expected numeric facet, found &2 ( 28 164 )
&1: expected characteristic type &2, found &3 ( 28 169 )
New version of net compilation: &1 &2 &3 &4 ( 28 391 )
Internal error in function & & & & ( 28 400 )
Restrictions of value set using dependencies not yet supported: &1 ( 28 406 )
Characteristic &1: data type "UDEF" not yet supported ( 28 407 )
Runtime error in constraint condition: #&1 &2 ( 28 471 )
Runtime error in constraint restriction: #&1 &2 ( 28 472 )
Error in dependency processing: condition &1 is empty ( 28 501 )
Error in dependency processing: action &1 is empty ( 28 502 )
Error processing dependency &1: instance &2 not known ( 28 508 )
Error in dependency processing: division by 0 in dependency &1 ( 28 510 )
Error in dependency processing: dependency &1, function &2 ( 28 511 )
Error in dependency processing: dependency &1, table &2 ( 28 512 )
No value could be inferred from table &2: dependency &1 ( 28 513 )
Error in dependency processing: dependency &1, function &2 ( 28 514 )
Error in dependency processing: dependency &1, function &2 ( 28 515 )
Error in dependency &1: negative value for characteristic &2 ( 28 516 )
Error in compilation of dependency &1: Code line &2 not found ( 28 520 )
Error in compilation of dependency &1: Action expected in line &2 ( 28 530 )
Error in compilation of dependency &1: Condition expected in line &2 ( 28 540 )
Error in compilation of dependency &1: Invalid operator in line &2 ( 28 542 )
Error in compilation of dependency &1: Alphan. term expected in line &2 ( 28 546 )
Error in compilation of dependency &1: Variable required in line &2 ( 28 547 )
Error in compilation of dependency &1: Obj. variable required in line &2 ( 28 548 )
Error in compilation of dependency &1: Type required in line &2 ( 28 549 )
Error in compilation of dependency &1: Char. key missing from line &2 ( 28 550 )
Error in compilation of dependency &1: Value set required in line &2 ( 28 554 )
Error in compilation of dependency &1: Literal required in line &2 ( 28 556 )
Error in compilation of dependency &1: List element required in line &2 ( 28 558 )
Trace settings saved ( 28 568 )
Object instance &1 entered for item &2 in instance &3 ( 28 570 )
Deleted: object instance &1 ( 28 572 )
Confirmed: object instance &1 ( 28 573 )
Value &2 entered for characteristic &1 ( 28 574 )
Deleted: characteristic &1 with value &2 ( 28 576 )
Confirmed: characteristic &1 with value &2 ( 28 577 )
Conflict of values: characteristic &1 with value &2 ( 28 578 )
Specialized: object instance &1 ( 28 581 )
Specialization withdrawn for object instance &1 ( 28 582 )
Constraint &1 is violated ( 28 610 )
Inconsistent values inferred for characteristic &1 ( 28 613 )
No further explanation available ( 28 640 )
Invalid cursor position ( 28 642 )
Maximum nesting depth for explanation reached ( 28 643 )
No text found for dependency ( 28 646 )
& & & & ( 28 999 )
BOM not found for this material/plant/usage ( 29 001 )
Inconsistent data (inform your system manager) ( 29 002 )
Alternative & already exists ( 29 003 )
Alternative & does not exist ( 29 004 )
BOM already exists for this material/plant/usage ( 29 005 )
Variant BOM already exists for this material/plant/usage ( 29 006 )
Multi-level BOM already exists for material & ( 29 007 )
No free numeric alternative could be determined ( 29 009 )
Alternative & added to BOM ( 29 010 )
Variant BOM (alternative not used) ( 29 011 )
No BOMs found for BOM group & ( 29 013 )
Material/usage ignored ( 29 016 )
BOM may be relevant to plant maintenance ( 29 017 )
BOM is allocated to other plants ( 29 018 )
BOM is relevant to plant maintenance ( 29 019 )
You are not authorized for authorization group & ( 29 020 )
You are not authorized for this reference ( 29 021 )
You are not authorized to create this BOM ( 29 023 )
You are not authorized to change this BOM ( 29 024 )
You are not authorized to display this BOM ( 29 025 )
You are not authorized to create variants for this BOM ( 29 026 )
You are not authorized to create new alternatives for this BOM ( 29 027 )
BOM for material & deleted ( 29 032 )
Variant created for material & ( 29 033 )
Change number & does not allow you to change BOMs ( 29 040 )
BOM number & & & was not processed with change number & ( 29 041 )
Date & copied from change number ( 29 042 )
Maintenance values adopted from change number & ( 29 043 )
Change number & does not allow you to create new BOMs ( 29 044 )
Enter change number - BOM has history requirement ( 29 045 )
Object management record cannot be generated ( 29 046 )
BOM & & & is locked for changes with change number & ( 29 047 )
A change number was entered, so the revision level is ignored ( 29 049 )
Date & and change no. & determined from revision level & ( 29 050 )
Revision level & does not exist for material & ( 29 051 )
BOM cannot be deleted on & with change number & ( 29 054 )
Material/plant/usage required to generate object management record ( 29 055 )
Revision level & not found for document & ( 29 056 )
Date &, change number & and version & determined from revision level & ( 29 057 )
BOM group & for material & & is not valid on & ( 29 058 )
BOM group & & is not valid on & ( 29 059 )
BOM for material & & not valid on & ( 29 060 )
Check effectivity data ( 29 061 )
Assign the item to an alternative ( 29 067 )
BOM already allocated to plant(s) ( 29 068 )
Allocation to group exists ( 29 069 )
First bill of material ( 29 070 )
Last bill of material ( 29 071 )
Material & is not configurable ( 29 072 )
BOM can only be extended via standard product & ( 29 073 )
BOM can only be changed via standard product & ( 29 074 )
Material & & is configured from standard product & ( 29 075 )
BOM can only be displayed via configurable material & ( 29 076 )
You cannot copy from configurable BOM ( 29 077 )
No configurable material exists for material &1 ( 29 079 )
Selected item(s) not valid on & - no operation allocation possible ( 29 080 )
No selected items valid on & - no allocation to operation possible ( 29 081 )
BOM status does not allow allocation to operations ( 29 082 )
Status & is not released for routings ( 29 083 )
Process materials not supported in BOM items ( 29 085 )
Item & & is classified ( 29 086 )
You are changing a CAD item ( 29 087 )
Only negative quantities supported for co-product ( 29 088 )
Co-products not supported for material & & ( 29 089 )
Modification parameters not found (inform your system manager) ( 29 090 )
Modification parameters incomplete (inform your system manager) ( 29 091 )
No default values found for transaction & ( 29 092 )
Dialog error (inform your system manager) ( 29 093 )
Object status & not supported ( 29 094 )
Group BOM ( 29 095 )
BOMs not supported in plant & ( 29 096 )
Special character & not supported for BOM number ( 29 097 )
Quantity calculated does not fit in the field ( 29 098 )
Material & is marked for deletion ( 29 101 )
Material & not maintained in plant & ( 29 102 )
Error producing a message ( 29 103 )
Update error - MRP level ( 29 104 )
Update terminated: error reading table & ( 29 105 )
Update terminated: table & function & return code & ( 29 106 )
Lot size to cannot be less than lot size from ( 29 107 )
BOM group & already exists ( 29 109 )
BOM is recursive ( 29 110 )
Item category & is not defined (check entry) ( 29 111 )
Material is a required entry for item category & ( 29 112 )
Do not enter material for item category & ( 29 113 )
Quantity must be positive for item category & ( 29 114 )
Quantity must be negative for item category & ( 29 115 )
Material type & not supported for BOM usage & ( 29 116 )
Material type & not supported for BOM item ( 29 117 )
Material type & cannot be used with item category & (plant &) ( 29 118 )
For material &1, material status &2 '&3' does not allow BOM maintenance ( 29 119 )
Material status & '&' is not selected for BOM item (plant &) ( 29 120 )
Material & has status & '&' ( 29 121 )
Material & & is flagged for deletion ( 29 122 )
Sub-item number has already been assigned ( 29 123 )
Enter number for sub-item ( 29 124 )
Material & & is defined as a bulk material ( 29 125 )
G/L account & not defined in company code & (plant &) ( 29 126 )
Bulk material not allowed for items relevant to costing ( 29 127 )
Bulk material only for items relevant to production and plant maintenance ( 29 128 )
Item status not supported ( 29 129 )
Item status does not allow you to maintain PM data ( 29 130 )
Plant & is the issuing plant ( 29 131 )
Sub-items exist for this item ( 29 132 )
No items containing component & could be selected ( 29 133 )
No item & for component & could be selected ( 29 134 )
Alternative & not found ( 29 135 )
Item category & only supported in BOMs relevant to PM ( 29 136 )
BOM usage & cannot be used with item category & ( 29 137 )
Item category & only supported for items relevant only to PM ( 29 138 )
PM assembly required for item category & ( 29 139 )
Base unit of measure & cannot be copied ( 29 140 )
Base units of measure (&/&) for the materials are different ( 29 141 )
Long text to be copied not found ( 29 142 )
Check the usage probability ( 29 144 )
" in material number & cannot be replaced ( 29 145 )
Operation scrap can only be maintained in connection with net indicator ( 29 147 )
Please enter all price data ( 29 148 )
Material group & different from material group & in material master ( 29 149 )
Cursor is not on valid line ( 29 150 )
Cursor is not on material ( 29 151 )
Item long text only saved if there are 3 lines or more ( 29 152 )
Long text only saved if there are 2 lines or more ( 29 153 )
The cursor is not on a sales order ( 29 159 )
BOM & & & is locked by & ( 29 160 )
BOM & is locked by & ( 29 161 )
Material & is locked by & ( 29 162 )
BOM group & being assigned by & ( 29 163 )
Change number & is locked by & ( 29 164 )
Cannot create - material & recursive ( 29 165 )
Cannot create - document & & & & recursive ( 29 166 )
Intra material -> no master data exists ( 29 168 )
System error while locking ( 29 169 )
Enter sub-item quantity ( 29 171 )
Item quantity changed from & to & ( 29 173 )
Unit of measure & not supported for material & in plant & ( 29 175 )
Unit of measure & not allowed for material & ( 29 176 )
Unit of measure & not defined ( 29 177 )
Unit system is inconsistent (inform your system manager) ( 29 180 )
Unit of measure & supports & decimal places ( 29 181 )
Unit of measure & does not support decimal places ( 29 182 )
First maintain dimension for unit of measure & ( 29 183 )
First maintain SI-unit for dimension & ( 29 184 )
Dimension not supported ( 29 185 )
Errors converting quantities ( 29 186 )
Conversion between units of measure not possible ( 29 187 )
Unit of measure & is not defined for class & & ( 29 188 )
Unit calculated for variable-size item not possible ( 29 190 )
Variable-size item quantity not recalculated ( 29 191 )
Variable & cannot be assigned value ( 29 193 )
Formula: & ( 29 194 )
First maintain a dimension for formula result ( 29 195 )
Dimension of variable-size item unit not supported in formula & ( 29 196 )
Formula & not supported ( 29 197 )
Formula contains invalid variable ( 29 198 )
An error (&) has occurred during calculation with formula ( 29 199 )
BOM not found for material/usage ( 29 201 )
Multiple BOM already exists for material & & ( 29 207 )
Material & only exists in plant & -> allocation not possible ( 29 208 )
Material & only exists in plant & ( 29 209 )
(Initial) plant same as allocated plant ( 29 211 )
Material must be same as initial material ( 29 212 )
Further allocations can only be made from same BOM (&) ( 29 213 )
You are not authorized to create allocations to plants ( 29 221 )
You are not authorized to change allocations to plants ( 29 222 )
You are not authorized to display allocations to plants ( 29 223 )
In plant &, you are not authorized to create ( 29 224 )
In plant &, you are not authorized to change ( 29 225 )
In plant &, you are not authorized to display ( 29 226 )
You are not authorized to create new alternatives in plant & ( 29 227 )
You are not authorized to create variants in plant & ( 29 228 )
At least one allocation must exist for each alternative/variant ( 29 237 )
Pipeline handling is not obligatory in plant & (item: & &) ( 29 238 )
Material status & '&' does not allow BOM for material & (plant &) ( 29 240 )
Material & has status & '&' (plant &) ( 29 241 )
Material & cannot be BOM item due to material status & '&' (plant &) ( 29 242 )
Material type & cannot be used with item category & (item: & &) ( 29 243 )
G/L account & not defined in company code & (plant &) (item: &) ( 29 244 )
Unit of measure & not defined (item: & &/plant &) ( 29 245 )
Distribution key & not defined in plant & (item: &) ( 29 246 )
Purchasing organization & not defined in plant & (item: &) ( 29 247 )
Storage loc. & not defined for material & in plant & (item: &) ( 29 248 )
Links to BOM &/&/& created ( 29 250 )
& is not a configured material in plant & ( 29 253 )
Standard products in plants & and & are different ( 29 254 )
& is not a configured material in plant & ( 29 256 )
No BOM exists for configurable material/plant/usage ( 29 260 )
No BOM exists for configurable material/plant ( 29 261 )
Different BOMs for configurable material & exist in plants & and & ( 29 262 )
The BOM is now recursive (item & &) ( 29 263 )
Configured material & only has variant & defined for it ( 29 265 )
Standard products & and & are different ( 29 266 )
Initial plant & and allocation plant & must be the same ( 29 267 )
Discontinuation group not defined in plant & (item: & &) ( 29 270 )
Supply area & not defined in plant & (item: &) ( 29 272 )
Issue location & not supported for supply area & in plant & (item: &) ( 29 273 )
Item ID & already exists ( 29 279 )
The BOM header can only be displayed. Your entries were ignored ( 29 282 )
The item can only be displayed. Your entries were ignored ( 29 283 )
Clean up the incomplete item data with report RCCS0001 ( 29 284 )
Special procurement key & not defined for items ( 29 286 )
Reference point & does not exist ( 29 287 )
First select document item ( 29 290 )
There are certain items that remain valid after the deletion date & ( 29 291 )
Deletion selected (select item(s) first) ( 29 300 )
Item screen ctrl key & not maintained: inform your system manager ( 29 301 )
First select item(s) ( 29 302 )
First select header(s) ( 29 303 )
First select alternative(s) ( 29 304 )
First select BOM ( 29 305 )
First select plant ( 29 306 )
Only one alternative can be selected for change ( 29 307 )
Only one alternative in the reference can be selected ( 29 309 )
Last selected alternative ( 29 310 )
First selected alternative ( 29 311 )
Last selected header ( 29 312 )
First selected header ( 29 313 )
Last & ( 29 314 )
First & ( 29 315 )
Last header overview ( 29 316 )
First header overview ( 29 317 )
Last selected item ( 29 318 )
First selected item ( 29 319 )
Last selected item (for which sub-items are supported) ( 29 320 )
First selected item (for which sub-items are supported) ( 29 321 )
Class overview is only supported in configurable BOMs ( 29 329 )
Item overview selected (first enter alternative) ( 29 330 )
Header full selected (first enter alternative) ( 29 331 )
Header overview selected (first enter alternative) ( 29 332 )
Item entry selected (first enter alternative) ( 29 333 )
Header quantity/long text selected (first enter alternative) ( 29 334 )
More header data selected (first enter alternative) ( 29 335 )
Header administrative data selected (first enter alternative) ( 29 336 )
& selected (no & found) ( 29 337 )
Alternative overview selected (remove alternative entry) ( 29 338 )
Delete selected (first select sub-item(s)) ( 29 339 )
Header overview cannot be displayed: only 1 header found ( 29 340 )
Class entry is only supported in configurable BOMs ( 29 341 )
Sub-items not supported for selected item(s) ( 29 342 )
Sub-items not supported for the current item ( 29 343 )
No all selected items were deleted ( 29 344 )
Links to operations not supported for selected item(s) ( 29 346 )
Discontinuation data not supported for selected items ( 29 347 )
Classification not supported for selected item(s) ( 29 348 )
Item category & requires you to enter a document ( 29 353 )
Item category & does not allow you to enter a document ( 29 354 )
Please enter complete document key ( 29 356 )
Item category & only supported in master recipes ( 29 359 )
Distribution key & not defined in plant & ( 29 360 )
Purchasing organization & not defined in plant & ( 29 361 )
Storage location & not supported for material & in plant & ( 29 362 )
Issue loc. only for items relevant to production and plant maintenance ( 29 363 )
Issue location & not supported for supply area & in plant & ( 29 367 )
Enter storage location for supply area ( 29 368 )
Supply area & not defined in plant & ( 29 369 )
Item category & requires you to enter a class ( 29 370 )
Item category & does not allow you to enter a class ( 29 371 )
Please enter resulting item category for class items ( 29 372 )
Resulting item category is only supported for class items ( 29 373 )
Resulting item category & not defined ( 29 374 )
Resulting item category & cannot be used with class type & ( 29 375 )
Class & & does not exist ( 29 376 )
Class status & does not allow selection ( 29 378 )
Class & & not supported in bills of material ( 29 379 )
Class & & is not valid on & ( 29 380 )
You are not authorized for selection in classes ( 29 381 )
Item category & cannot be used with class type & ( 29 382 )
Class type only defined for material and document items ( 29 383 )
Selection condition only supported if you enter a class type ( 29 384 )
Resulting item category & is different from default & for class ( 29 386 )
Organizational area & not defined for class & & (&) ( 29 387 )
Item category & only supported in configurable BOMs ( 29 388 )
The selected components cause recursiveness ( 29 389 )
Component & causes recursiveness ( 29 390 )
Class type & not supported in configurable objects ( 29 391 )
Variant class type & not supported in BOMs ( 29 392 )
Resulting item category & only supported in BOMs relevant to PM ( 29 395 )
BOM usage & cannot be used with resulting item category & ( 29 396 )
If the resulting item category is &, PM assembly is required ( 29 397 )
No base unit of measure for BOMs defined in class ( 29 398 )
Old and new material are the same ( 29 401 )
Old and new material types (&/&) incompatible ( 29 402 )
Base units for old (&) and new (&) materials are incompatible ( 29 403 )
Units of issue for old (&) and new (&) materials are incompatible ( 29 404 )
Material & not used on & ( 29 405 )
Material & not used in technical status & ( 29 406 )
See log ( 29 407 )
Old document is the same as new document ( 29 412 )
New class number is the same as old class number ( 29 413 )
Caution! Component quantity of old material & changed ( 29 418 )
Caution! Component quantity of old document & & & & changed ( 29 419 )
Caution! Component quantity of class & changed ( 29 420 )
Invalid combination ( 29 424 )
You cannot delete the old material ( 29 425 )
You cannot change the old material ( 29 426 )
You cannot delete the old document ( 29 427 )
You cannot delete the old class ( 29 428 )
You cannot change the old document ( 29 429 )
You cannot change the old class ( 29 430 )
If you change an item, old material must be the same as new material ( 29 433 )
Maintain at least one item change ( 29 435 )
Key date is not required when deleting over entire period ( 29 436 )
Please enter a key date ( 29 437 )
Invalid combination ( 29 439 )
Number range cannot be reset ( 29 440 )
Changes to the BOM exist after & ( 29 460 )
Changes to the BOM group exist after & ( 29 461 )
+/- sign does not correspond with the component quantity ( 29 465 )
Certain selected components are allocated to a task list ( 29 468 )
Components of the BOM are allocated to a task list ( 29 469 )
You are not authorized to delete the (alternative) BOM ( 29 470 )
Item can be either co-product or discontinued/follow-up item ( 29 475 )
Item can be either discontinued/follow-up item or alternative item ( 29 476 )
Material & & is to be discontinued ( 29 477 )
Discontinuation not defined for material & & ( 29 480 )
Please enter either a discontinuation group or a follow-up group ( 29 481 )
Please check the discontinuation indicators for material & ( 29 482 )
Please enter follow-up group ( 29 483 )
Follow-up group not supported for discontinued part ( 29 484 )
Fixed quantity not supported for alternative items ( 29 485 )
Item can be either co-product or alternative item ( 29 487 )
Please enter alternative item group ( 29 488 )
Change number & does not support dependency maintenance ( 29 490 )
Dependencies can only be changed with a change number ( 29 491 )
Change number & not defined for classification ( 29 492 )
Classification data can only be changed with a change number ( 29 493 )
Please enter item group ( 29 494 )
Number assignment error ( 29 499 )
& Material & not maintained in plant & ( 29 501 )
& Material & does not have a BOM ( 29 502 )
& This BOM is not effective on & ( 29 503 )
& Alternative & not found ( 29 504 )
& No selection made for usage of material & ( 29 507 )
& Enter application ( 29 508 )
& You are not authorized to display the BOM ( 29 509 )
& Material & not found in BOMs ( 29 510 )
& Enter required quantity or resulting quantity ( 29 512 )
& BOM is marked for deletion ( 29 516 )
& BOM is not active ( 29 517 )
Spool order created ( 29 518 )
& alternative priority; enter an alternative BOM ( 29 520 )
& Revision level & for material & does not exist ( 29 522 )
& Conversion error - Check units/conversion factors for & ( 29 524 )
Maintenance with change number is not defined for usage & ( 29 525 )
& No use of & found ( 29 531 )
& No use of & selected ( 29 532 )
& In validity entered, & is not used ( 29 533 )
& Class & & not used ( 29 541 )
& No use of class & & selected ( 29 542 )
& In validity period entered, & & is not used ( 29 543 )
& You are not authorized to display data on & & ( 29 545 )
& Class & & is not active ( 29 546 )
& Class & & is not valid on & ( 29 549 )
& Specify at least one application or usage ( 29 560 )
& Enter a required quantity or an alternative for a multiple BOM ( 29 561 )
& Enter at least one material or sales order data ( 29 562 )
Superior bill of material must be an order BOM ( 29 571 )
The material could not be created ( 29 572 )
Material for the sales order item cannot be changed ( 29 573 )
BOM has been changed. Refresh the screen contents ( 29 574 )
BOM display is not possible with cumulated comparison ( 29 589 )
Please enter material and usage for order no. &, item & ( 29 592 )
No BOM information available for production order & ( 29 595 )
Bill of material could not be fixed (see log) ( 29 597 )
Comparison result cannot be displayed in list viewer ( 29 599 )
No default defined for indicator & ( 29 604 )
Enter "+" or "-" ( 29 612 )
Material type & not supported for BOM headers with usage & ( 29 645 )
BOM category & is already linked to another object type ( 29 654 )
Task list type & is already linked to another object type ( 29 655 )
History requirement only supported if engineering change mgmt is active ( 29 659 )
Special character & not supported for BOM usage ( 29 660 )
Reference usage and new usage are the same ( 29 661 )
You cannot change usage from PM only due to existing BOM(s) ( 29 662 )
Item category & is not a material or text item ( 29 664 )
Item category & is not a document item ( 29 665 )
Item category & is within your reserved customer name range (0-9, X-Z) ( 29 666 )
Item category & is within the SAP-reserved name range (A-W) ( 29 667 )
Item category & is not a class item ( 29 668 )
User & not defined ( 29 669 )
An entry with revision level & is marked for deletion ( 29 673 )
There is already an entry for date & ( 29 675 )
Object & & does not exist ( 29 677 )
Entry is not possible, template & ( 29 680 )
Multiple BOM / variant BOMs already exist ( 29 682 )
No BOM exists for WBS element ( 29 691 )
BOM already exists for WBS element ( 29 692 )
BOM for WBS element/material & is not effective on & ( 29 693 )
BOM not found for equipment/plant/usage ( 29 701 )
BOM already exists for equipment/plant/usage ( 29 702 )
BOM for equipment/plant &/& is not vaild on & ( 29 703 )
Equipment & on & allocated to PM planning plant & ( 29 711 )
Only usages relevant to plant maintenance are supported ( 29 712 )
Equipment/usage ignored ( 29 714 )
BOM group & for equipment & & not valid on & ( 29 715 )
No BOM found for equipment/usage ( 29 716 )
A variant BOM exists for equipment/plant/usage ( 29 717 )
Equipment and initial equipment must be the same ( 29 719 )
No BOM exists for class/usage ( 29 721 )
A BOM already exists for class/usage ( 29 722 )
The BOM for document & is not valid on & ( 29 733 )
Item category & is not supported in document structures ( 29 740 )
Document key ignored ( 29 742 )
BOM group & for document & is not valid on & ( 29 743 )
Document & & & & is marked for deletion ( 29 745 )
BOM for functional location & & is not valid on & ( 29 753 )
Functional location & (&) is allocated to planning plant & ( 29 759 )
Functional location/usage ignored ( 29 761 )
BOM group & for functional location & & is not valid on & ( 29 762 )
No BOM exists for this functional location/usage ( 29 763 )
Functional location & is marked for deletion ( 29 765 )
Functional location must be same as on initial screen ( 29 767 )
Standard BOM & & & does not exist ( 29 770 )
Standard BOM & & & already exists ( 29 771 )
Special character & is not supported for standard BOMs ( 29 772 )
Standard BOM & & is not valid on & ( 29 773 )
Sales order & is locked ( 29 780 )
No BOM exists for this sales order item/usage ( 29 781 )
A BOM already exists for this sales order item/usage ( 29 782 )
The BOM for sales order item & & is not valid on & ( 29 783 )
The BOM for this sales order item only supports configurable materials ( 29 784 )
Sales order & does not exist ( 29 787 )
Sales order item & & does not exist ( 29 788 )
No plant has been assigned to sales order item & & ( 29 792 )
Sequential file & could not be opened ( 29 800 )
Sequential file & does not contain batch input records ( 29 801 )
First record in sequential file & is not a session header record (Type 0) ( 29 802 )
Record type & not supported: record ignored ( 29 803 )
Previous session header record was ignored ( 29 804 )
Item record must be preceded by a header record ( 29 805 )
Sub-item record must be preceded by an item record ( 29 806 )
Session &: session record contains no session name ( 29 807 )
Session &: session record contains no client ( 29 808 )
Session &: copied client & is different from system client & ( 29 809 )
Session &: session record contains no user name ( 29 810 )
Transaction & not supported ( 29 811 )
& & & cannot have discontinuation data - discontinuation data ignored ( 29 815 )
Please select a valid line ( 29 818 )
Session &: copied client & not defined ( 29 820 )
Processing terminated ( 29 821 )
Session name & not defined ( 29 822 )
Session &: lock date & not defined ( 29 823 )
Session &: internal error creating session ( 29 824 )
Session &: no user was included ( 29 827 )
Screen load for screen & & not found ( 29 831 )
No application server has been selected ( 29 839 )
Enter an application server ( 29 840 )
"&" is not defined as an application server ( 29 841 )
Data on presentation server -> server ignored ( 29 842 )
Data on local application server -> server ignored ( 29 843 )
Sequential file & on server & could not be opened ( 29 844 )
Sequential file & on server & does not contain any batch input records ( 29 845 )
Conversion error occurred ( 29 850 )
Error converting field & & ( 29 851 )
An error has occurred: please check the application log ( 29 870 )
BOM processed successfully (see application log for more information) ( 29 871 )
Spare part indicator & not defined (check your entry) ( 29 880 )
Materials-prov. indicator & not defined (check your entry) ( 29 881 )
Formula & not defined (check your entry) ( 29 882 )
Item category & not defined (please check your entry) ( 29 883 )
BOM status & not defined (check your entry) ( 29 884 )
BOM usage & not defined (check your entry) ( 29 885 )
Laboratory/office & not defined (check your entry) ( 29 886 )
Plant & not defined (please check your entry) ( 29 887 )
Application & not defined (check your entry) ( 29 893 )
Job &1 does not meet TMS naming conventions ( 2B 001 )
Job control data not found ( 2B 002 )
Job &1 &2 does not have a job log ( 2B 003 )
Job &1 &2 does not exist in system ( 2B 004 )
Request comes from another domain ( 2B 005 )
TMS not configured, background commands cannot be executed ( 2B 006 )
TMS locked ( 2B 007 )
Could not generate new TMS background process number ( 2B 009 )
&1 &2 &3 &4 ( 2B 010 )
Could not create &1 with background control ( 2B 011 )
Could not create any steps for &1 ( 2B 012 )
Release of &1 in system &3 failed with return code &2 ( 2B 013 )
No authorization for releasing &1 for background processing ( 2B 014 )
Could not store control data for &1 ( 2B 015 )
Release of job &1 terminated ( 2B 017 )
Could not read job data for &1 ( 2B 018 )
Could not change job &1 ( 2B 019 )
Authorization for &1 to change jobs missing ( 2B 020 )
Authorization for &1 to test job status missing ( 2B 021 )
Could not test job status for &1 ( 2B 022 )
Authorization for &1 to delete jobs missing ( 2B 023 )
Could not delete job &1 ( 2B 024 )
Could not read job &1 ( 2B 025 )
Could not read job log for &1 ( 2B 026 )
No TMS jobs found in system &1 ( 2B 027 )
No job control data found ( 2B 029 )
No log for job &1 &2 found ( 2B 030 )
Job &1 &2 does not exist ( 2B 031 )
Status &3 of job &1 &2 does not allow you to cancel the release ( 2B 032 )
Status &3 of job &1 &2 does not allow you to release the job ( 2B 033 )
Error &1 when entering scheduling data ( 2B 034 )
Cannot delete job &1 &2 with status &3 ( 2B 035 )
Could not cancel job &1 &2. Terminated with error &3 ( 2B 036 )
Status of job &1 &2 does not allow you to cancel it ( 2B 038 )
Job &1 &2 deleted with its job control data ( 2B 039 )
Job &1 &2 deleted without its job control data ( 2B 040 )
Status of job &1 &2 corrected ( 2B 042 )
No TMS data found for job number &1 ( 2B 043 )
Transport routes inconsistent ( 2B 044 )
Choose one job only ( 2B 049 )
&1 jobs with job control data and &2 jobs without control data deleted ( 2B 055 )
Could not execute command &1 ( 2B 100 )
Command &1 ended with a warning ( 2B 101 )
Select end of frame below frame heading ( 2C 001 )
Interface design &1 (DSINT: &2) locked by &3 ( 2C 007 )
Interface design &1 does not exist ( 2C 008 )
Line to must be greater than line from ( 2C 010 )
Column to must be greater than column from ( 2C 011 )
Characteristics group & already exists ( 2C 012 )
Select one of the three display options ( 2C 013 )
The system is summarizing into tabs ( 2C 014 )
You cannot create more than two sequences ( 2C 017 )
Internal number assignment error &1 &2 ( 2C 018 )
You can only select one display option ( 2C 030 )
Enter a language ( 2C 100 )
Enter a frame description ( 2C 101 )
Language & not defined ( 2C 102 )
Enter a text for the pushbutton ( 2C 103 )
Caution: First specify client &2 for &1 ( 2L 399 )
RFC error with destination &1 ( 2L 430 )
Target system (&2) of destination &1 does not match LIS definition (&3) ( 2L 431 )
Error when executing test function module &2 with destination &1 ( 2L 432 )
Parameter &1 for system &2 is not defined in LIS ( 2L 450 )
System &1 on host &2 already known ( 2Q 001 )
SAP system on &1, service &2 points to a known domain ( 2Q 002 )
Enter a host name ( 2Q 008 )
Enter a service number ( 2Q 009 )
&1 &2 &3 &4 ( 2Q 010 )
Character string for host name and SAProuter must be &1 long ( 2Q 012 )
Domain link to domain &1; controller &2 already exists ( 2Q 013 )
System &1 originates from its own domain &2; cannot be deleted ( 2Q 014 )
Domain link &1 does not exist in domain &2 ( 2Q 015 )
Cannot delete systems from other domains ( 2Q 017 )
Cannot lock systems from other domains ( 2Q 018 )
Cannot unlock systems from other domains ( 2Q 019 )
Domain link to domain &1 deleted ( 2Q 020 )
Proposal for domain link for &1 reset ( 2Q 023 )
Proposal for domain link for &1 accepted ( 2Q 024 )
Status of domain link &1 is 'Waiting to be accepted' ( 2Q 025 )
Status of domain link &1 is 'Received domain link request' ( 2Q 026 )
Domain link to domain &1 unknown ( 2Q 027 )
Follow the password rules for TMSADM (SAP Notes 1515926, 1414156) ( 2Q 031 )
Could not find transport step log entries from &1 at &2 ( 2R 001 )
Cannot display any more details ( 2R 002 )
Material "&" is not configurable ( 2X 001 )
Characteristic values cannot be assigned to '&' ( 2X 002 )
Find objects function not possible ( 2X 003 )
Material "&" is not allocated to a variant class ( 2X 005 )
Error during INSERT in table &, RCode = &, key = & & ( 30 002 )
Error during UPDATE in table &, RCode = &, key = & & ( 30 003 )
Error during DELETE in table &, RCode = &, key = & & ( 30 004 )
No data records entered ( 30 005 )
Data records saved ( 30 006 )
No change made --> not saved ( 30 007 )
Service & created ( 30 008 )
Service & changed ( 30 009 )
Service & deleted ( 30 010 )
Master record & for reference does not exist ( 30 011 )
Master record number & already exists ( 30 012 )
Master record number & does not exist ( 30 013 )
Short text for master record & does not exist ( 30 014 )
User has no authorization for master record & ( 30 015 )
Master record number & in line & already exists ( 30 016 )
Please maintain short text in line & ( 30 017 )
Please maintain unit of measure in line & ( 30 018 )
You are not allowed to change the unit of measure ( 30 019 )
No data record exists in internal table & (operation &) ( 30 020 )
A long text already exists in language &1 ( 30 024 )
Number range & does not exist ( 30 040 )
Number range & is not an external number range ( 30 041 )
Number of master record & not within external number range ( 30 042 )
Service category & not defined ( 30 043 )
Organization status & for service category not defined ( 30 044 )
Precondition for entry of wage type is that unit must be unit of time ( 30 045 )
Master record not classified ( 30 050 )
Validity date only defined in conjunction with status ( 30 051 )
Please enter validity date ( 30 052 )
Validity date is in the past ( 30 053 )
No valuation class exists for account reference ( 30 054 )
No wage types exist ( 30 055 )
Wage type & not defined ( 30 056 )
Valuation class & not allowed ( 30 057 )
Master record & for hierarchy does not exist ( 30 058 )
Particulars relating to standard service catalog already exist ( 30 059 )
Particulars relating to higher-level service and wage type already exist ( 30 060 )
Particulars relating to standard service catalog are incorrect ( 30 061 )
Data for standard service catalog copied -> check duplicated data ( 30 062 )
Data for higher level serv. and wage type copied -> check duplicated data ( 30 063 )
Data for standard service catalog incomplete ( 30 064 )
Unit of measure cannot be changed due to existence of conditions ( 30 065 )
Text contains formatting -> SAPscript editor ( 30 300 )
&1 without valid change indicator were ignored ( 30 659 )
The interval contains records of different subtypes ( 32 001 )
Subsequent pay scale level missing in pay scale groups table ( 32 006 )
The entry for the required key is missing in the pay scale groups table ( 32 007 )
Check the "Grouping of Employee Subgroups for Coll.Agreem.Provis." table ( 32 008 )
Entry for key & is missing in the personnel area/subarea table ( 32 009 )
No record exists for infotype &, date & ( 32 010 )
You are not authorized to read infotype & ( 32 011 )
Enter a positive number of biennial salary inc. in Infotype Basic Pay (&) ( 32 012 )
Check the pay scale groups table ( 32 013 )
Check the pay scale groups table ( 32 014 )
Create the key date for service regulations in infotype & or & ( 32 015 )
Maintain date type "Key Date for Service Regulations" for date ID & ( 32 016 )
Amount data record does not match last master data record read ( 32 023 )
Check the table of assignments of wage types to infotypes (&1) ( 32 024 )
Check the table of assignments of field names to wage types (&1) ( 32 025 )
Package header record not included in import table ( 32 026 )
Header record not included in import table ( 32 027 )
Trailer record not included in import table ( 32 028 )
Package end record not included in import table ( 32 029 )
Record read in import table does not have type Package Header ( 32 030 )
Record read in import table is not of type "Header Record" ( 32 031 )
Record read in import table does not have type "Trailer Record" ( 32 032 )
Record read in import table does not have type Package End ( 32 033 )
The import table contains records after the package end record ( 32 034 )
Maintain the field conversion table for record type & and version & ( 32 037 )
Maintain the field conversion table for rec.type &, vers. &, ext.field & ( 32 039 )
Check the field type in the record structures table ( 32 040 )
No calculation process assigned to pay scale &1 ( 32 051 )
The level is only determined for increase type A (feature AVSTG) ( 32 052 )
No process step assigned to public service law &1 ( 32 054 )
No pay scale assigned to calculation process &1 ( 32 055 )
Define the conversion rule &2 of calculation process &1 ( 32 056 )
Public service law &1 cannot be derived from the entry date ( 32 060 )
Rate &2 with pay scale grouping &3 of pay scale &1 is not defined ( 32 061 )
Pay scale level &3 &4 of collect. agreem. provis. &2 has no membersh.per. ( 32 062 )
Pay scale level &2 &3 &4 of pay scale &1 is not defined ( 32 066 )
&1:Pay scale level &2 &3 &4 is the last pay scale level ( 32 067 )
Result format not processed in the standard system ( 32 068 )
Rate is not defined ( 32 069 )
If capacity utiliz. level > 100%, operat. level intentity not determined ( 32 070 )
No evaluation date for reassignment generated between &1 and &2 ( 32 071 )
No increase carried out for this employee ( 32 075 )
Pay scale level is not fully defined ( 32 076 )
Increase type &1 is not defined ( 32 077 )
There is already a reassignment on & before the next increase ( 32 082 )
No increase defined for pay scale grouping &1 &2 &3 of pay scale &4 ( 32 083 )
Automatically determined level does not match saved level ( 32 084 )
Despite gross pension, no data processed for pers. no. & (&/&) ( 32 108 )
Selection parameter 'New Change Reason' is initial ( 32 129 )
Pers.no. & has different feature APABS & than data carrier & ( 32 131 )
Maintain infotyp assignment of wage type & to start date & in table & ( 32 136 )
Reported pension type (&) in infotype 0484 differs from feature APQUA (&) ( 32 139 )
File &2 imported to TemSe &1 does not start with a package header record ( 32 142 )
The Pension Type field is not filled for pers. no. & ( 32 143 )
No payroll driver found for date & and country & ( 32 146 )
Enter a new TemSe object number or leave the field empty ( 32 148 )
In infotype 484, & is expected in field 'Type of Accident Insurance' ( 32 157 )
No suitable infotype 484 found for imported data record ( 32 158 )
Entry only possible for type of benefit "U1 Accident Pension" ( 32 160 )
Error updating infotype 0042 ( 32 161 )
The number of children to be taken into account changes between &1 and &2 ( 32 162 )
No valid social insurance number exists for pers. no. & ( 32 163 )
For pers. no. &, paragraph of Sec. 47 EStG missing in infotyp 484 ( 32 164 )
Dynam. assignment failed as field & not contained in structure & ( 32 216 )
Fill the Priority field ( 32 222 )
Set the Priority field to initial (blank) ( 32 223 )
Select a different priority ( 32 224 )
Parameter &1 not defined for call of operation AOSVT ( 32 225 )
An error occurred in operation &1 ( 32 226 )
Check the tax code for contribution type & ( 32 227 )
A variance occurred during creation of SI tax table ( 32 228 )
An error occurred in operation &1 ( 32 229 )
ALV list: field catalog entries (GT_FIELDCAT) greater than 99 ( 32 230 )
Check return value of feature AVKAT ( 32 231 )
Activate subapplication SVON ( 32 233 )
No field links proposed ( 33 002 )
Error in module &1; no message number in the context definition ( 33 010 )
Context version &1 successfully retrieved ( 33 051 )
Highlighted names are not unique ( 33 073 )
&1 contains parameter(s) without reference field or type ( 33 078 )
Specify a type for module &1 ( 33 081 )
A temporary version was generated with number & ( 33 130 )
Cursor wrongly positioned ( 33 230 )
Duplicate version of context field &1 exists ( 33 235 )
Creating, copying and renaming of contexts not allowed before 4.0C ( 33 899 )
Configuration contains unknown object &1 ( 34 240 )
Configuration contains unknown attribute &1 ( 34 241 )
Value &1 of attribute &2 has an incorrect format ( 34 242 )
Configuration contains unknown BOM item &1 ( 34 243 )
Fixed values of domain &1 could not be read ( 35 001 )
District &2 of municipality &1 does not exist (check your entry) ( 35 002 )
Use only numeric values for the dynpro number ( 37 000 )
Use a dynpro number less than 9000 ( 37 001 )
Use a dynpro greater than or equal to 9000 ( 37 002 )
Text element needs a name for translation ( 37 004 )
Could not save dynpro &1 &2 ( 37 005 )
Dynpro & & was saved without checking ( 37 006 )
Dynpro & & was deleted ( 37 007 )
Could not import the dynpro & & ( 37 009 )
Dynpro & & does not exist ( 37 010 )
No dynpro was selected ( 37 011 )
Dynpro does not exist but can be added ( 37 013 )
Dynpro was not found ( 37 014 )
Dynpro number 0 is not valid ( 37 018 )
The flow logic in dynpro & & is empty ( 37 019 )
Selection screen cannot be changed in Screen Painter. ( 37 020 )
Dynpro header incomplete: Program name or dynpro number missing ( 37 021 )
Character &1 in element name not allowed ( 37 024 )
The dynpro &1 &2 is protected; see the long text for more information ( 37 026 )
No selection made from list of tables ( 37 027 )
Table not found in ABAP Dictionary ( 37 028 )
Generated dynpro is not the current version ( 37 029 )
Only use dynpro numbers 8500-8999 for partner developments ( 37 030 )
Only use dynpro numbers 8500-8999 for partner developments ( 37 031 )
A version was generated for dynpro & & ( 37 034 )
No version was generated for dynpro & & ( 37 035 )
Specify a program name ( 37 036 )
Element is a cell of a splitter control and cannot be deleted ( 37 037 )
Search help & is not active in ABAP Dictionary ( 37 038 )
Field ID & for matchcode object & not active in ABAP Dictionary ( 37 039 )
Format & is not permitted in the Screen Painter ( 37 040 )
Specify both a field ID and a field name for the subkey ( 37 042 )
Assign a name to the dynpro element ( 37 043 )
No matchcode subkey can be assigned to field & ( 37 044 )
ABAP Dictionary field name already exists on the screen ( 37 045 )
ABAP Dictionary field &-& not found in Dictionary ( 37 046 )
Insufficient space for ABAP Dictionary field ( 37 047 )
ABAP Dictionary type & is not allowed for dynpro element & ( 37 048 )
Entry in a loop continuation line is not allowed ( 37 049 )
Name & was already assigned to another dynpro element ( 37 050 )
Name & in & & has length 0; editing options are limited ( 37 051 )
Element & in & & is a splitter control; cannot be processed ( 37 052 )
Maximum number of columns (255) exceeded in table control &1 ( 37 053 )
Last line is full, insert not possible ( 37 054 )
Unable to insert line in loop ( 37 055 )
Unable to delete loop line ( 37 056 )
Unable to insert a line within a box ( 37 057 )
Loop start line must not be blank ( 37 059 )
Place the cursor on a suitable dynpro element ( 37 060 )
Screen limit exceeded (&1 lines, &2 columns) ( 37 062 )
Collision at target location. Operation not performed ( 37 063 )
Specify loop block end line without continuation lines ( 37 064 )
Loop block end line is not greater than first line ( 37 065 )
Insufficient space for loop continuation lines ( 37 066 )
Variable loop requires whole line. Operation not performed ( 37 067 )
Cursor not allowed outside the dynpro ( 37 071 )
Selection in loop continuation lines is not allowed ( 37 073 )
Assign a name to the line selection field ( 37 075 )
Target block overlaps with loop lines ( 37 076 )
Maximum screen limits (&1 lines, &2 columns) exceeded ( 37 077 )
Selection overlaps with loop lines ( 37 078 )
Place the fields by selecting ( 37 080 )
No fields selected; check the preselection ( 37 081 )
Too little space for table/program fields. Fields not placed ( 37 082 )
Place fields from clipboard with 'Paste' function ( 37 083 )
Name already exists (You cannot create by insertion) ( 37 084 )
Contents of temp. storage are inappropriate (unable to insert) ( 37 085 )
Invalid attribute combination for line selection ( 37 086 )
The line selection element & will be deleted ( 37 087 )
Unable to delete or cut out line selection element ( 37 088 )
Insert & ignored because temporary storage contains only a text field ( 37 089 )
Place the cursor on a field which can accept input ( 37 090 )
Enter a name first (element does not yet exist) ( 37 091 )
Create the column element for table column & first ( 37 092 )
Specify a column width > 0 ( 37 094 )
Previous columns are also fixed ( 37 095 )
Fixing of subsequent columns also canceled ( 37 096 )
Choose a visible length between & and & ( 37 097 )
Element already exists (edit with 'Attributes' function) ( 37 098 )
& has column headers, which will also be deleted ( 37 099 )
Attribute "Configurability" for & will be or remains reset ( 37 100 )
Specify table/field name ( 37 101 )
Table & not active in ABAP Dictionary ( 37 102 )
Specify a table name no longer than 30 characters ( 37 103 )
No Dictionary information found for &1-&2 ( 37 104 )
For &, a title field & exists. It will be deleted ( 37 105 )
Position the cursor on a valid field name field ( 37 106 )
Choose Sash between & and & percent ( 37 107 )
Place the cursor on a free position ( 37 108 )
Place the cursor on a table control ( 37 109 )
Place the cursor on a modified dynpro element ( 37 110 )
Table dynpro & & already exists ( 37 115 )
Dynpro element &1 too long; shortened to length &2 ( 37 116 )
Graphical element not complete in loop. Operation not performed ( 37 126 )
Input/output field and text field are not in the same loop ( 37 127 )
Dynpro & & was saved and generated ( 37 130 )
No syntax errors found ( 37 131 )
Dynpro & & was generated in display mode ( 37 132 )
Table control & can already be resized horizontally (not executed) ( 37 133 )
Table control & can already be resized vertically; not executed ( 37 134 )
Loop contains an illegal element. Operation not performed ( 37 135 )
You cannot insert a line in this area ( 37 136 )
You cannot delete a line in this area ( 37 137 )
Selection overlaps with an area ( 37 138 )
This name is already assigned to another area ( 37 139 )
Size of area or control is invalid ( 37 140 )
Select end of area ( 37 141 )
Insufficient space for area ( 37 142 )
Unable to define screen element in loop block ( 37 143 )
One variable (vertically resizeable) loop already exists. Not executed ( 37 144 )
Text field (keyword) does not exist in ABAP Dictionary ( 37 145 )
Field text is shorter than specified in ABAP Dictionary ( 37 146 )
1..4 dictionary texts; V variable dictionary texts; F fixed modifications ( 37 147 )
Text field flagged as modified, since it does not exist in the Dictionary ( 37 148 )
Dynpro editing canceled ( 37 149 )
Number of lines must be between number 'filled' and maximum & only ( 37 150 )
Number of columns must be between number 'filled' and maximum & only ( 37 151 )
Max. 20 lines according to GUI standard ( 37 152 )
Dynpro is too big; maintenance size cannot be changed ( 37 156 )
Cannot delete selected line ( 37 157 )
Temporary storage is empty ( 37 160 )
Field name & already exists in dynpro ( 37 161 )
Error when saving. Generation not possible ( 37 162 )
Target dynpro already exists; delete it first ( 37 163 )
Dynpro does not exist ( 37 164 )
Dynpro & & was added ( 37 165 )
& & ( 37 166 )
Specify a dynpro name ( 37 169 )
Buffer was filled with & rows & columns ( 37 170 )
Dynpro copy canceled ( 37 171 )
Dynpro deletion canceled ( 37 173 )
Choose a processing type ( 37 175 )
Screen contains more than 19 lines. Adjust window ( 37 177 )
The OK_CODE field cannot be deleted ( 37 178 )
Not enough space; dynpro element truncated ( 37 180 )
Maximum length is &1 characters ( 37 181 )
Only checkboxes, radio buttons and pushbuttons allowed in loop lines ( 37 182 )
Select only one dynpro element ( 37 185 )
Selection overlaps graphical element ( 37 186 )
Define lower right corner of box by selection ( 37 187 )
Unable to increase size of box ( 37 189 )
Select loop end below first loop block ( 37 190 )
Use at least two loop blocks when selecting ( 37 191 )
Do not select loop end below the intended area ( 37 192 )
'Input' attribute lost in transformation to box or pushbutton ( 37 194 )
There is no space for the box page margin ( 37 197 )
Box touches or overlaps with another dynpro element ( 37 198 )
Insufficient space for a pushbutton ( 37 199 )
User & is already editing the dynpro & & ( 37 200 )
You have no display authorization ( 37 201 )
You are not authorized to make changes ( 37 202 )
Program & does not exist ( 37 203 )
Non-executable element changes in a dynpro line ( 37 204 )
Unable to increase length ( 37 207 )
Text, input/output field and icon cannot all be missing at the same time ( 37 208 )
Element is too long (visible field length will be shortened) ( 37 209 )
Visible length is shorter than defined length (not transformed) ( 37 213 )
Character @ not allowed as first character. Operation not performed ( 37 214 )
Length 0 is not allowed. Operation not performed ( 37 215 )
& is not a valid icon name (use input help) ( 37 216 )
"Permanent help key for values" for & will be ignored at runtime ( 37 217 )
Use at least the defined length & ( 37 218 )
Type change between text field and input/output field is not possible ( 37 219 )
Not enough space for icon of length &. Operation not performed ( 37 220 )
Icons cannot be assigned to input fields ( 37 221 )
Icon assigned to element & (cannot transform to graphical element) ( 37 222 )
Visible length is shorter than icon length. Operation not performed ( 37 223 )
Icon & is not a valid pushbutton icon. ( 37 224 )
Icon & is allowed only as a pushbutton icon. ( 37 225 )
Only input fields can be required entry fields. Operation not performed ( 37 226 )
Transformation to field control only possible for single element ( 37 228 )
& has an invalid program type ( 37 230 )
Graphical Screen Painter not active or could not be canceled ( 37 240 )
Graphical Screen Painter canceled ( 37 241 )
Graphical layout editor: F1 help through Performance Assistant impossible ( 37 242 )
File does not contain a dynpro ( 37 250 )
Dynpro file was created in an incompatible release ( 37 251 )
The dynpro was modified and cannot be deleted ( 37 261 )
Function type "Local GUI function" not allowed ( 37 270 )
Function code may not begin with '/' ( 37 276 )
Reference field &1 does not exist in the dynpro or has an incorrect type ( 37 277 )
GUI &1 patch &2 less than required (&3); continue with Alpha Screen ( 37 298 )
Flow logic of dynpro & & contains errors; check the syntax ( 37 510 )
Program & contains errors. Check syntax ( 37 511 )
Could not generate dynpro &1 &2: &3 ( 37 518 )
Error when deleting & ( 37 522 )
Internal error in scanner - too little memory ( 37 524 )
Field &1 does not exist in (active version of) table &2 ( 37 526 )
Graphical Layout Editor not available. Continue with alphanumeric editor. ( 37 527 )
The field & does not exist in (the generated version of) program & ( 37 528 )
The dynpro name & & is invalid ( 37 529 )
Selection canceled ( 37 535 )
Transformation of text field & to graphical element not possible ( 37 542 )
Graphical group expanded to individual pushbuttons ( 37 548 )
You cannot delete checkboxes or radio buttons from the element list ( 37 549 )
Include element & in the selected area ( 37 550 )
Enter a name for all elements in the selected area ( 37 551 )
Pushbuttons and checkboxes require a name ( 37 552 )
Name & has already been assigned to a graphical element ( 37 553 )
Name & has already been assigned to a template or field text ( 37 554 )
Areas must have unique names. Operation not performed ( 37 555 )
Delete the name & of the OK_CODE field first ( 37 556 )
& is an area (subscreen). Operation not performed ( 37 557 )
No layout errors ( 37 558 )
Modification mode: Selected area contains invalid elements ( 37 559 )
Dynpro & & was generated without saving with complete flow logic ( 37 560 )
Dynpro & & was generated without saving or a PAI part in the flow logic ( 37 561 )
& & is a selection dynpro or template dynpro (not checked) ( 37 562 )
Dynpro consistency check for & was canceled ( 37 563 )
Only one of two elements & is in the loop (cannot be tranformed) ( 37 564 )
Leave enough space for possible entries icon ( 37 566 )
Unable to delete an element of a databound control ( 37 567 )
Element & is not a pushbutton or has no assigned function ( 37 568 )
You cannot use this function in modification mode for original element & ( 37 569 )
Selected area overlaps a box ( 37 570 )
Selected area overlaps radio buttons or checkboxes ( 37 571 )
No versions found for dynpro & ( 37 575 )
Version for dynpro & was restored ( 37 576 )
Select end of loop block ( 37 580 )
Place the cursor so that all elements are completely enclosed ( 37 581 )
No space for at least 2 loop blocks ( 37 582 )
Other elements will be truncated (loop unchanged) ( 37 583 )
Support Package system: Changes to the dynpro are restricted ( 37 585 )
& & switched to standard 21x83 (not saved yet) ( 37 587 )
Internal error in &: Dynpro & & is damaged or incomplete ( 37 590 )
Internal error: Illegal parameter & from function module & ( 37 591 )
Internal error with &1 (unable to find &2) ( 37 592 )
Internal error: Incorrect dynpro & & ( 37 593 )
Internal error with &2 (unable to execute &2) ( 37 594 )
Logon with Unicode ON in Unicode system. Continue with Alpha screen ( 37 596 )
Internal error with &1 (unable to find starter program &2) ( 37 597 )
GUI release & lower than system release &. Continue with alpha screen. ( 37 598 )
Internal error: Incomplete data transfer with & & ( 37 599 )
GUI is not a GUI for Windows (continue with alphanumeric editor) ( 37 601 )
Field name & already exists. (Unable to change name) ( 37 604 )
Element length too short (element not changed) ( 37 606 )
Input not numeric (value not changed) ( 37 609 )
Screen limit exceeded (element not changed) ( 37 610 )
Field overlapped or bordered (element not changed) ( 37 611 )
Field name & is not a valid ABAP Dictionary name ("-" missing) ( 37 612 )
Field name cannot be blank. Name not changed ( 37 614 )
Text cannot begin with an underscore ('_' replaced by '#') ( 37 615 )
Element modified, since none of the Dictionary texts fits ( 37 617 )
Field text does not exist in ABAP Dictionary ( 37 618 )
Element is shorter than defined in ABAP Dictionary ( 37 619 )
I/O template must begin with an underscore. First character replaced ( 37 620 )
Icon & unknown. Icon name not changed ( 37 621 )
The text may not begin with an icon code ('@' replaced by '#') ( 37 622 )
Icon & not permitted for this object type (icon name not changed) ( 37 623 )
Unable to compare attribute name &->& against the class library ( 37 624 )
Field name & is not a valid class attribute name ("->" missing) ( 37 625 )
Format & does not match property format & ( 37 626 )
Format & of the Dictionary field & does not fit the property format & ( 37 627 )
Function code may not begin with a slash ('/' removed) ( 37 628 )
Switch &1 does not exist and does not conform to naming convention ( 37 630 )
Collision at target location (element not placed) ( 37 653 )
Screen limits exceeded (element not placed) ( 37 654 )
Collision at target location. Group not placed ( 37 655 )
Element(s) are outside new limits; dynpro size not changed ( 37 667 )
Element name & already exists; text not used ( 37 675 )
Name(s) already exist. Use elements in question without names? ( 37 676 )
No template or text is switched on ( 37 700 )
ABAP Dictionary table must be specified precisely ( 37 702 )
Field & is too long (reduced to maximum field length &) ( 37 707 )
Selection contains fields that cannot be taken over ( 37 708 )
Selection not possible in display mode ( 37 709 )
Type not allowed for a title strip element in a tab ( 37 720 )
Type not allowed for a page element in a tab ( 37 721 )
No tab page selected ( 37 722 )
De-referenced page element deleted ( 37 723 )
Collision with page element in tab ( 37 724 )
Unable to find page element &; reference not used ( 37 728 )
Maximum element size exceeded ( 37 750 )
Element too short ( 37 751 )
Collision at target location (element not moved) ( 37 752 )
Unable to delete command in command field ( 37 753 )
Screen limit exceeded (element not moved) ( 37 754 )
Field overlapped or bordered ( 37 755 )
Screen or window limit reached ( 37 756 )
Internal error: Screen for icon & unknown in Screen Painter ( 37 762 )
Collision at target location (element truncated and made scrollable) ( 37 763 )
You cannot change container in modification mode ( 37 764 )
No blank line for margin. ( 37 770 )
No blank column found for box. ( 37 771 )
Text field is empty (cannot be transformed) ( 37 772 )
Pushbutton is blank. ( 37 773 )
Pushbutton icon does not match text. ( 37 774 )
Reference element & not found ( 37 775 )
Selection does not contain an element ( 37 780 )
Collision at target location. Group not moved ( 37 781 )
Screen limit exceeded (group not moved) ( 37 782 )
Group must contain at least 2 pushbuttons ( 37 785 )
Group can only contain radio buttons ( 37 786 )
Radio button does not have field name (unable to create group) ( 37 790 )
Conflict in target location; & elements truncated or not used ( 37 791 )
Elements of a group are in different containers ( 37 792 )
Elements of a group of radio buttons in different containers ( 37 793 )
Element exists in already selected element (element not selected) ( 37 834 )
Element contains already selected element (element not selected) ( 37 835 )
Element(s) not visible in container (unable to select element(s)) ( 37 836 )
Character & not allowed in element names ( 37 837 )
Do you want the element to have an ABAP Dictionary reference ( 37 838 )
Element name may not consist only of digits ( 37 839 )
Collision in table control (element not included) ( 37 850 )
Invalid element for table control (conversion not possible) ( 37 851 )
Header element in table control shortened ( 37 852 )
Falls short of minimum table control height ( 37 853 )
Falls short of table control width ( 37 854 )
Invalid type for header element in table control ( 37 855 )
Invalid type of column element in table control ( 37 856 )
Collision with header element in table control ( 37 857 )
No column for header element in table control ( 37 858 )
Header element deleted ( 37 859 )
Header element(s) also deleted ( 37 862 )
Are you sure you want to delete the title element? ( 37 864 )
Are you sure you want to delete the header element? ( 37 865 )
Are you sure you want to delete the header elements? ( 37 866 )
The header element will also be deleted. Delete? ( 37 867 )
Create a title element for the table control ( 37 869 )
Create header elements for the table control ( 37 870 )
Specify a name for the line selection element ( 37 871 )
Connection to SAP System lost. Program terminated ( 37 882 )
Unable to format data. Exit program? ( 37 885 )
Unable to pass data. Exit program? ( 37 886 )
Internal error while exchanging data. Exit program? ( 37 887 )
Windowing system &1 not supported in graphical layout editor ( 37 889 )
Character string not found ( 37 891 )
This is a verification test message with 4 parameters (long text) ( 38 004 )
Reference person.no.was changed retroactively for the previous period ( 3B 107 )
Work in category: ' ', 'X', '1', '2', '3', '4' ( 3B 974 )
Invalid Nationality ( 3D 000 )
Identity Type not defined for nationality & ( 3D 001 )
Invalid Wagetype ( 3D 002 )
Please fill up Calculation basis wagetype ( 3D 003 )
JAMSOSTEK ID cannot contain any special characters. ( 3D 004 )
Invalid JAMSOSTEK Identification No ( 3D 005 )
Marital status is different from that entered in Personal Data Infotype ( 3D 006 )
Employee maximum limit can not be greater than allowed maximum limit ( 3D 008 )
Employee minimum limit can not be lower than allowed minimum limit ( 3D 009 )
Employer maximum limit can not be greater than allowed maximum limit ( 3D 010 )
Employer minimum limit can not be lower than allowed minimum limit ( 3D 011 )
Limit is not prescribed in the table T7ID13. ( 3D 012 )
Please select level for the scheme before selecting a contribution type ( 3D 013 )
Employee minimum limit can not be greater than maximum limit ( 3D 014 )
Employer minimum limit can not be greater than maximum limit ( 3D 015 )
Contributions are not given in the table for & & & & for selection period ( 3D 017 )
Calc. Rules are not given in the table for & & & & for selection period ( 3D 018 )
Insurance & does not exist ( 3D 019 )
Insurance & is not a Health Insurance Scheme ( 3D 020 )
Female employees are supposed to be treated as 'Single' for JAMSOSTEK. & ( 3D 021 )
Please check date(s)! & & ( 3D 023 )
Please complete your entry. & & & ( 3D 024 )
The contribution entries do not match with the rule. ( 3D 025 )
The rule cannot be blank. ( 3D 026 )
Please select at least on report for processing ( 3D 039 )
This Organisational change can not take place. ( 3D 043 )
Choose 'All Employees' when 'Employee with Tax' is checked ( 3D 045 )
Tax id entered is different from Company Tax id ( &-&-& ). ( 3D 201 )
Unmarried person cannot claim spouse benefits. ( 3D 202 )
Please enter the unemployment certificate number for spouse. ( 3D 203 )
Unemployment Ref No must be 15 characters long with alpha-numeric values. ( 3D 204 )
Please check Spouse Benefit field. ( 3D 205 )
Company Tax id does not exist for Pers. Area & and Sub Area &. ( 3D 206 )
Marital Status is different from Personal Data infotype. ( 3D 207 )
Record does not exist for current dates in Personal Data. ( 3D 208 )
No record found for corresponding Pers. Area & and Sub Area & in T7IDOP. ( 3D 209 )
Number of Dependents is inconsistent with actual no. of dependents ( & ). ( 3D 210 )
Form of address (Mr / Mrs) and gender are inconsistent. ( 3D 211 )
Entry for constant '&' not found in table T511K. ( 3D 212 )
Invalid Personal Tax Id. ( 3D 213 )
A male emp. who is married for tax purposes should get spouse benefit. ( 3D 214 )
Please enter either (Contribution % &1) or (Contr. Amount &2) &3 ( 3E 001 )
Employee (Contr. Amount &1) will override default (Contribution % &2)! ( 3E 002 )
(Contr. Amount &1) will override calculated (Contribution % &2)! ( 3E 003 )
Enter (Contr. Amount &1) or calculated (Contribution % &2) &3 ( 3E 004 )
Enter (Contr. Amount &1), (Contribution % &2) or (Contr. Factor &3) &4 ( 3E 005 )
(Contribution % &1) will override calculated (Contr. Amount &2)! ( 3E 006 )
Enter calculated (Contr. Amount &1 ) or (Contribution % &2) &3 ( 3E 007 )
User entered (Contribution % &1) will override calculated (&2 &3)! ( 3E 009 )
Enter (Contribution % &1) or (Contr. Factor &2) &3 ( 3E 010 )
User entered (Contribution % &1) will override (Contr. Factor &2)! ( 3E 012 )
Calculated (Contribution % &1) will override default (Contribution % &2)! ( 3E 013 )
Calculated (Contr. Amount &1) will override default (Contribution % &2)! ( 3E 014 )
User entered (Contr. Factor &1) will override default (&2 &3)! ( 3E 015 )
User entered (Contr. Amount &1) will override calculated (&2 &3)! ( 3E 016 )
Enter (Contr. Amount &1) or (Contr. Factor &2) but not both! ( 3E 017 )
User entered (Contr. Amount &1) will override (Contr. Factor &2)! ( 3E 019 )
User entered (Contr. Amount &1) will override default (&2 &3)! ( 3E 020 )
Error reading feature & ( 3E 022 )
Number range interval not found when retrieving the next IR cert number ( 3E 023 )
Number range object not found when retrieving the next IR cert number ( 3E 024 )
Unable to read table & ( 3E 025 )
The sum of Tax Percentage & and Student Loan Percentage & exceeds 100.00% ( 3E 026 )
Country modifier could not be found for personnel area & and subarea & ( 3E 027 )
For absence pay type A, the gross earning adj. wage type is compulsory ( 3E 028 )
No data exists (select again) ( 3E 030 )
Enter either amount or rate ( 3E 038 )
Amount and rate are not permitted ( 3E 039 )
Enter an amount but no rate ( 3E 040 )
Enter a rate but no amount ( 3E 041 )
Enter an amount or rate ( 3E 042 )
Enter an amount. Rate is optional. ( 3E 043 )
Enter a rate. Amount is optional. ( 3E 044 )
Enter both an amount and a rate ( 3E 045 )
Could not export & to pcl4 ( 3E 047 )
No employees selected to terminate ( 3E 049 )
There is no wage type set up in T512W for termination cheque payment ( 3E 050 )
No entry in T530 for reason & under event & ( 3E 051 )
Payroll area & is locked. Open another session, change status and retry ( 3E 052 )
There is no unit of measure setup for & in table T511 ( 3E 053 )
Feature '43EMS' has not been maintained or generated ( 3E 056 )
No entry found in table T511K for '&1' ( 3E 057 )
Period parameters could not be found in table T549A for payroll area &1 ( 3E 059 )
A valid infotype 0001 record could not be found during &1 - &2 ( 3E 060 )
Period dates could not be found in table T549Q for period parameter &1 ( 3E 061 )
A pay date could not be found in table T549S ( 3E 062 )
Inconsistent internal number for quota &1 ( 3E 063 )
No payroll results could be found during &1 - &2 ( 3E 064 )
A tax code could not found for this employee during &1 - &2 ( 3E 067 )
Invalid remittance begin date ( 3E 068 )
Invalid remittance end date ( 3E 069 )
The remittance dates must fall within the same month and year. ( 3E 070 )
Could not retrieve paydate during & - & (Table T549S key & &) ( 3E 072 )
No valid entry in table & for key & & & ( 3E 073 )
Employee was not accounted during & - & ( 3E 074 )
Infotype 0001 record cannot be found for this survey ( 3E 082 )
No payroll results retrieved for this employee &1, &2, &3 ( 3E 085 )
Employee is not accounted for in any payroll periods applicable to survey ( 3E 086 )
Employee was not accounted for in the payroll period &1 &2, area &3. ( 3E 087 )
No entry in T549Q. ( 3E 151 )
No valid T7NZLR table entry for leave type &, accrual id & ( 3E 152 )
&1 Participates in super scheme &2 but company contribution % is 0. ( 3E 153 )
No & Infotype record ( 3E 154 )
No PTQUODED entries ( 3E 155 )
No entry in table T556A for & ( 3E 156 )
Unable to & infotype & ( 3E 157 )
Unable to & infotype & ( 3E 158 )
Deduction not correct after rebooking ( 3E 159 )
Fund & not found in table T5QSF, fund is not processed for employee. ( 3E 286 )
Could not retrieve paydate between & & - table T549S key & & ( 3E 297 )
No valid entry in table & for key & & & ( 3E 299 )
No valid entry in the tax scale table for tax code & on pay date & ( 3E 300 )
No valid entry in the earner premium table for tax code & on pay date & ( 3E 301 )
No valid entry in student loan table for tax code & on pay date & ( 3E 302 )
No valid entry in low income rebate table for tax code & on pay date & ( 3E 303 )
No valid entry in super surcharge tab. for surcharge code & on pay date & ( 3E 304 )
Invalid pay frequency & entered ( 3E 306 )
Tax code '&' changed to the corresponding student loan tax code ( 3E 310 )
The & is not valid & the 01.04.2000 ( 3E 311 )
Enter a valid View type ( 3E 317 )
Enter a valid View Expansion level ( 3E 318 )
Check priority. The same wage type must have a different priority. ( 3E 888 )
Same subtype already exists ( 3F 002 )
Entry & & does not exist (check your entries) ( 3F 003 )
Enter delimitation rule ( 3F 008 )
There is no entry in the pay scale structure for the data specified ( 3F 010 )
There is no entry in the salary structure for the data specified ( 3F 011 )
Relevant currency and unit of time could not be found ( 3F 012 )
Relevant currency or unit of time could not be defined. ( 3F 013 )
Organizational structure not definable in period &1 to &2 ( 3F 014 )
Use the view cluster maintenance ( 3F 016 )
Validity period lies outside the pay grade period ( 3F 017 )
Record & & & &: Maintain unit of time ( 3F 018 )
Application: HR-PD Client: & Infotype Planned Compensation (1005) ( 3F 019 )
Salary lies outside the range (& - &) for this grade level ( 3F 029 )
Plan version '&' was set from Compensation Management ( 3F 037 )
Subtype & for infotype & does not exist (check your entries) ( 3F 042 )
Budget for & of & was set to initial ( 3F 047 )
Org. unit cannot be selected as there is no compensation manager ( 3F 048 )
Compensation component & is not permissable ( 3F 050 )
Planned compensation cannot be determined ( 3F 061 )
Planned compensation not unique ( 3F 062 )
The time unit does not correspond to a valid value for this pay scale ( 3F 066 )
Record & & & &: Time unit was set to a pay scale value ( 3F 067 )
Inconsistent validity periods exist ( 3F 068 )
Employee's country grouping and compensation area differ ( 3F 082 )
Wage type model changed on &1 ( 3F 083 )
You can only maintain this infotype in Compensation Administration ( 3F 084 )
Compensation adjustment type & does not exist (check entry) ( 3F 102 )
Adjustment type & for area & does not exist (check entries) ( 3F 103 )
Compensation area & does not exist ( 3F 104 )
Compensation adjustment reason & does not exist ( 3F 105 )
Guidelines for wage type & in compensation area & do not exist ( 3F 106 )
Guidelines & for compensation area & do not exist ( 3F 107 )
There is no eligibility rule for compensation adjustment reason & ( 3F 108 )
Eligibility rule & for eligibility group & does not exist ( 3F 109 )
No compensation adjustment reasons exist at the moment ( 3F 111 )
Compensation adjustment type & does not exist for adjustment reason & ( 3F 112 )
Planning period &1 does not exist. Enter an existing planning period ( 3F 113 )
The combination planning period/processor view returned no results ( 3F 126 )
There are no adjustment types for this error in this planning period ( 3F 127 )
There is no entry for eligibility rule &1. Employee is not eligible ( 3F 128 )
Information on employee's compensation adjustment on & not found ( 3F 152 )
Information on employee's basis pay on & not found ( 3F 153 )
Information on employee's org. assignment on & not found ( 3F 154 )
Information on employee's working time on & not found ( 3F 155 )
Job indicator &1 not valid on &2 ( 3F 161 )
Average bonus (percent) could not be calculated ( 3F 163 )
Average bonus could not be calculated ( 3F 164 )
Employee not eligible for compensation adjustments ( 3F 209 )
The validity of the adjustment does not match the employment period ( 3F 219 )
EE group & EE subgroup &: Grouping for appraisal does not exist ( 3F 229 )
Personnel subgroup grouping for appraisals does not exist ( 3F 230 )
No organizational assignment found in the period & to & ( 3F 233 )
Appraisals for employee &1 between &2 and &3 not found ( 3F 240 )
No currency has been specified for budget type group & on & ( 3F 241 )
At least on of the wage types for adjustment type & could not be rounded ( 3F 272 )
No rounding rules found for the wage types belonging to adjustment type & ( 3F 273 )
Appraisal model & is not used in a matrix dimension ( 3F 279 )
Appraisal model & is not used in a matrix ( 3F 280 )
Appraisal model & is not used in a guideline ( 3F 281 )
Appraisal model & is not used in a compensation wage type ( 3F 282 )
Appraisal model & is not used in an adjustment ( 3F 283 )
Appraisal model & is not used in an adjustment reason ( 3F 284 )
No valid planning period could be determined ( 3F 298 )
Combination personnel area &1 and personnel subarea &2 does not exist ( 3F 322 )
No entry found for currency &1 and exchange rate &2 ( 3F 323 )
Time unit &1 does not exist ( 3F 324 )
(&3) An error occurred during currency conversion ( 3F 325 )
(&3) An error occurred during time conversion ( 3F 326 )
(&3) You cannot assign a planned compensation via the job ( 3F 327 )
The calculated reclassification date & is not permissable ( 3F 354 )
IT rec. 0008 (&2 - &3): Reassignment to wage level date &1 not permitted ( 3F 358 )
IT record 0008 (&1): End level according to table T510_PSRCL reached ( 3F 359 )
Error reading pay grade levels and/or pay grades for basic pay on & ( 3F 428 )
Incorrect calculation rule for calculating length of service ( 3F 430 )
Data is locked by user & (function not possible) ( 3F 437 )
You have not maintained a function module for method & ( 3F 446 )
Table T71E0, key &1: Enter matrix ( 3F 471 )
Contradictory entries defined ( 3F 472 )
No data found in table T71CA for entry &2 in &1 ( 3F 473 )
Check existing entries for & in T71CA ( 3F 474 )
The salary structure is currently locked ( 3F 502 )
No jobs were selected ( 3F 503 )
Data could not be saved ( 3F 511 )
There are no links to survey providers available. ( 3F 607 )
Error have occurred in the XML interface. ( 3F 609 )
Error reading object type of job. ( 3F 611 )
There are no survey providers in the system. ( 3F 612 )
Assign a survey type to the survey providers. ( 3F 613 )
Please check the survey type which has been assigned. ( 3F 614 )
Only enter a bonus or a fixed bonus and a variable bonus ( 3F 616 )
You cannot change the status because budgets have already been claimed ( 3F 696 )
Status change not possible, as budget struc. has already been extended ( 3F 697 )
Budget status & does not exist for budget type group & ( 3F 702 )
Budget structure selected has not been released yet ( 3F 704 )
The budget structure selected could not be locked ( 3F 706 )
Validity of the budget structure or parts of it is already extended ( 3F 707 )
There is a gap between budget period &1 and period &2 ( 3F 709 )
One of the budget periods specified does not exist ( 3F 710 )
You are not authorized to display/change the new budget ( 3F 712 )
The budgets could not be deleted (dependent budgets exist) ( 3F 714 )
There is already a relationship for the financed unit &1 &2 ( 3F 715 )
The budget unit is not allowed for budget type group &1 ( 3F 719 )
No budget type indicator stored in the customizing settings ( 3F 720 )
An error occurred when changing the budget values ( 3F 722 )
The budget types are incompatible ( 3F 727 )
The budget structure no longer exists in budget period & ( 3F 728 )
The customizing table entries for budget unit & & were changed. ( 3F 731 )
One of the currencies you are using does not exist ( 3F 736 )
The currency data required to change the budget values is missing ( 3F 739 )
You cannot not enter quantities for monetary budgets ( 3F 740 )
You cannot enter currency amounts for quantity budget types ( 3F 741 )
Due to budget type &1, this budget cannot be disposed ( 3F 742 )
Budget has the status "planned" ( 3F 743 )
Budget falls short of required amount and exceeds available amount ( 3F 744 )
An error occurred when saving the budget structure ( 3F 745 )
Object & & does not exist in budget period & ( 3F 747 )
An error occurred when creating the budget units ( 3F 748 )
An error occurred when creating the relationship(s) ( 3F 749 )
You cannot use this function for the root budget unit ( 3F 751 )
Could not find budget type group & ( 3F 757 )
Budget period &1 could not be found for budget type group &2 ( 3F 760 )
An error occurred calling up F4 help ( 3F 767 )
The budget unit data could not be checked ( 3F 768 )
No budget currency stored in the customizing settings ( 3F 769 )
Budget type group &1 and/or budget type &2 not allowed ( 3F 770 )
The budget unit could not be created ( 3F 772 )
There is an error in the budget structure ( 3F 773 )
There is an error in the evaluation path ( 3F 774 )
There is no name for budget type &1 of budget type group &2 ( 3F 776 )
An error occurred when formatting the budget structure data ( 3F 777 )
An error occurred when displaying the budget structure ( 3F 778 )
Could not find the root budget unit ( 3F 780 )
Error found (inconsistent budgets exist) ( 3F 787 )
Budget has been released (you cannot edit a budget that has this status) ( 3F 789 )
Multiple selection is not possible for this function ( 3F 790 )
You cannot use this function for the current budget status ( 3F 791 )
You can only use this function for complete budget structures ( 3F 792 )
Available budget was exceeded ( 3F 793 )
Budget falls short of required amount/quantity ( 3F 794 )
Budget & & cannot be deleted (dependent budgets exist) ( 3F 798 )
Plan scenario &1 &2 &3 &4 has already been released ( 3F 802 )
Text for plan scenario &1 has been changed to a new entry ( 3F 806 )
No authorization for scenario group &1 &2 &3 &4 ( 3F 807 )
Calc. inactive: values for scenario gr. &1 &2 &3 &4 are not up-to-date ( 3F 809 )
Calcultion inactive: View &1 cannot be changed ( 3F 810 )
Plan already released: Calculation must remain active ( 3F 811 )
The view 'Cost Objects' was changed to 'Individual Objects' ( 3F 813 )
No valid entry has been chosen ( 3F 814 )
Cost item &1 does not exist in the period of time selected ( 3F 816 )
No data exists in the period chosen ( 3F 819 )
The time unit &1 has not been maintained in table T546T or T777L ( 3F 820 )
No &1 chosen ( 3F 821 )
No scenario group(s) found ( 3F 822 )
Object &1 &2 '&3' only available in the reference plan ( 3F 827 )
Error starting the background processing for scenario &1 &2 &3 &4 ( 3F 829 )
Wage element &1 does not exist in the period from &2 to &3 ( 3F 830 )
Cost object &1 &2 '&3' was transferred from the reference plan ( 3F 832 )
Cost object &1 &2 '&3' already exists in the current plan ( 3F 833 )
Object type &1 is not supported in the standard system ( 3F 834 )
Repeat save so that the system can recalculate the scenarios ( 3F 835 )
No controlling area/financial year selected ( 3F 836 )
frror assigning controlling area &1 to plan scenario ( 3F 837 )
The CO system could not be determined in the ALE customizing ( 3F 840 )
Controlling area &1: CO periods could not be determined ( 3F 841 )
There are no CO plan sources defined in HR customizing ( 3F 842 )
Plan scenario &1 &2 &3 &4 is not released ( 3F 843 )
The CO system has release &1 ( 3F 844 )
Cost assignment to periods could not be carried out ( 3F 846 )
Customer exit for employee &3 (&1) is returning an error ( 3F 852 )
Customer exit for employee &3 (&1) has inconsistent data ( 3F 853 )
No cost data has been maintained for basic pay for cost object &3 (&1) ( 3F 854 )
No cost data from payroll exists for cost object &3 (&1) ( 3F 855 )
No cost data for projected pay exists for cost object &3 (&1) ( 3F 856 )
Data transfer for controlling area &1 has already been executed ( 3F 859 )
Scenario group &1: No account assignment object planned ( 3F 860 )
Scenario group &1: Cost element &2 of cost item &3 not defined ( 3F 861 )
Organizational unit &1 &2 are used in several scenario groups ( 3F 862 )
Controlling area &1: Financial year could not be determined ( 3F 863 )
User &1 is already editing the scenario group ( 3F 869 )
User &1 is already editing the plan scenario ( 3F 870 )
Error log entry could not be created for object (&1) &2. ( 3F 880 )
Number format cannot be interpreted (correct file version?) ( 3G 002 )
The & conversion program for cluster & does not exist ( 3G 003 )
Cluster & will not be edited ( 3G 004 )
The new or old version of cluster & could not be determined ( 3G 005 )
The currency could not be determined for client & and PCGrouping & ( 3G 006 )
The record & could not be imported in client & ( 3G 008 )
The record & could not be converted in client & ( 3G 009 )
The record & could not be saved in client & ( 3G 010 )
Wage type "&" could not be converted from "&" to "&" ( 3G 023 )
Cluster CD/CU for & could not be read in client & ( 3G 025 )
Payroll record & & in client & has the incorrect version number & ( 3G 033 )
Error when updating PCL2: XPRA has been canceled ( 3G 037 )
Cluster & has already been converted ( 3G 038 )
Type &1 is not valid for payroll reporting ( 3G 040 )
Nummer range 01 to number range HR_PEVAL2 sub-object &1 is full ( 3G 041 )
Number range 01 to HR_PEVAL2 sub-object &1 cannot be created ( 3G 042 )
Number range 01 to HR_PEVAL2 sub-object &1 is not internal ( 3G 043 )
Internal error during number assignment to object HR_PEVAL2 ( 3G 044 )
Number range object HR_PEVAL2 has not been found ( 3G 045 )
Posting run &1 &2 already exists ( 3G 046 )
Run number &1 &2 does not exist ( 3G 047 )
Attribute for run &1 &2 does not exist ( 3G 048 )
Run number &1 &2 is locked ( 3G 051 )
Deletion is not possible: Dependent run &1 &2 exists ( 3G 055 )
Run &1 &2 cannot be deleted ( 3G 057 )
Choose the key from the allowed namespace ( 3G 060 )
No name range definition is possible for specifications ( 3G 061 )
Name range definition must be more precise ( 3G 062 )
Name range definition is already used by country grouping 99 ( 3G 063 )
Specifications for processing class can only have one character ( 3G 064 )
Client &1 has already been converted, no action is necessary ( 3G 073 )
Please maintain the symb.account for wage type &2 (PCG &1) ( 3G 074 )
The symb. acc. does not exist for wage type &2 (PCG &1) ( 3G 075 )
The symb. account for wage type &2 (PCG &1) is inconsistent ( 3G 076 )
Wage type &2 (PCG &1): Specification PCL 32 is unknown ( 3G 077 )
Application: HR-PAY client: &1 ( 3G 079 )
Customizing steps for posting converted for client &1 with errors/warning ( 3G 080 )
Cluster CD is no longer used ( 3G 083 )
In client &, record & could not be imported from cluster F1 ( 3G 084 )
In client &, the record & could not be imported from cluster F2 ( 3G 085 )
Error when updating PCL4: XPRA has been terminated ( 3G 086 )
No payroll results found to be converted ( 3G 087 )
No status history found for run &1 &2 ( 3G 089 )
Payroll posting document &1 does not exist ( 3G 090 )
Document &1 cannot be released: incorrect status ( 3G 092 )
Document(s) cannot be released: Incorrect run status ( 3G 093 )
No line information for document &1 exists ( 3G 095 )
The selected runs do not contain any documents ( 3G 096 )
This document was not posted to Accounting ( 3G 098 )
Incorrect country grouping &2 (country grouping for run: &1) ( 3G 099 )
Call up of feature PPMOD was not successful ( 3G 100 )
Inconsistence in payroll results (tables &1/RT) ( 3G 101 )
Payroll result has already been evaluated in run &1 ( 3G 102 )
Posting balance is not cleared (&1) ( 3G 103 )
Wage type &1: Symb. account &2 does not exist ( 3G 104 )
Wage type &1, symb. account &2: Acc. assignment &3 does not exist ( 3G 105 )
Personnel number locked by payroll run/reporting ( 3G 106 )
The posting date for period &2/&3 for payroll area &1 is not maintained ( 3G 107 )
Payroll area &1 is invalid ( 3G 108 )
Payroll results for reporting cannot be simulated ( 3G 109 )
Simulation payroll run for &2 could not take place ( 3G 110 )
Country grouping &1 does not exist ( 3G 111 )
Payroll results could not be imported ( 3G 112 )
Employee grouping &1 does not exist (feature PPMOD contains errors) ( 3G 114 )
WT &1: Transfer posting during cost assignment only for transfer to R/2 ( 3G 115 )
Personnel number &1 has no payroll results ( 3G 116 )
Please specify a valid name for the payroll program ( 3G 117 )
Payroll simulation with document creation is not permitted ( 3G 119 )
Please use the wage type copy function (transaction PU30) ( 3G 120 )
This tool is not part of the IMG ( 3G 121 )
The entries have been transferred ( 3G 122 )
No authorization to read or write for cluster & ( 3G 123 )
Payroll results are inconsistent for personnel number &1 ( 3G 125 )
Cluster CU could not be read for personnel number &1 ( 3G 126 )
The sequence numbers could not be created for per.no. &1 ( 3G 127 )
Error when creating the payroll directory for personnel number &1 ( 3G 128 )
An archive exists for per.no. &1 and this archive cannot be converted ( 3G 134 )
Entries inserted in table T52MCW for Matchcode W: & ( 3G 137 )
Infotype 0003: KOABR indicator (old Matchcode W) deleted: & ( 3G 138 )
The role of the client is not defined ( 3G 140 )
According to control record for PArea &1, payroll is not completed ( 3G 141 )
Control record for payroll area &1 is missing ( 3G 142 )
WBS element with external number &1 is not recognized in the system ( 3G 143 )
WBS element with the internal number &1 cannot be converted ( 3G 144 )
No read authorization for cluster &1 ( 3G 145 )
No account can be determined for search key &1 HRC &2 &3 &4 ( 3G 146 )
Export to cost planning not possible, since actual data exists ( 3G 147 )
Posting to special periods for manual posting date is not possible ( 3G 148 )
Error in user exit: Account assignment type changed in user exit ( 3G 152 )
Posting run &1 not completely posted ( 3G 153 )
No authorization to start a posting run of type &1 ( 3G 155 )
No authorization to perform the activity (auth. object &1) ( 3G 156 )
Expenditure type &1 is more than 100% financed ( 3G 157 )
Error in user exit: Generated WType &1 is also included in payroll result ( 3G 158 )
Company code clearing not possible for external company codes ( 3G 159 )
Error in symbolic account &1 with account assignment type FO ( 3G 160 )
Wage type &1: Posting to symbolic account &2 without expenditure type ( 3G 161 )
Entering an expenditure type for this symbolic account is not allowed ( 3G 162 )
Payroll result &1 &2 could not be read from the puffer ( 3G 163 )
Deleting the runs occurs via update ( 3G 167 )
Selection using matchcodes is not allowed ( 3G 168 )
No authorization for the action 'Set manually to posted status' ( 3G 169 )
Internal error for personnel number &1: no index line found ( 3G 173 )
Internal error for personnel number &2: period not found ( 3G 174 )
Feature PU136 is not generated in client & ( 3G 175 )
Use the data transfer workbench ( 3G 176 )
Posting run PP&1 contains no posting documents; Read the long text ( 3G 177 )
The created posting run contains no documents; Read the long text ( 3G 178 )
EXIT_RPCIPE00_001: Acc.assgn.type changed to invalid assgn in user exit ( 3G 179 )
Only choose posting runs of one type ( 3G 180 )
Payroll simulation: Payroll program &1 does not exist ( 3G 181 )
Payroll simulation: Variant &1 does not exist ( 3G 182 )
Payroll simulation: An input parameter was not specified ( 3G 183 )
Payroll simulation: There is an incorrect parameter combination ( 3G 184 )
Payroll simulation: The country grouping for payroll is incorrect ( 3G 185 )
Error when importing the out-of-sequence reversal original result ( 3G 187 )
Original out-of-sequence reversal result is not in the RGDIR ( 3G 188 )
Error when reading cluster CU for the personnel number &1 ( 3G 189 )
The hidden parameter REVR_SQN is only permitted together with SET_REVR ( 3G 190 )
There are no payroll results with sequence number &1 ( 3G 191 )
The payroll results with sequence number &1 are not original results ( 3G 192 )
The dependent entries were not copied correctly ( 3G 194 )
Combination of personnel area &1 and personnel subarea &2 is invalid ( 3G 195 )
System unable to format name for personnel number &1 ( 3G 196 )
Payroll result &1: table BT does not contain any payment information ( 3G 197 )
Payroll result &1: payment method missing for payment &2 ( 3G 198 )
Company code &1 is invalid; see the long text ( 3G 199 )
&1 line items rejected: Account category &2 does not exist. ( 3G 201 )
&1 line items rejected: Amount and number are zero. ( 3G 202 )
Account with the following search key was not found: &1 ( 3G 203 )
Company code clearing account not found in co. code &1 for co. code &2 ( 3G 204 )
Posting varient &1 does not exist ( 3G 205 )
Error when maintaining the run status ( 3G 206 )
Posting run &1 &2 does not have the 'Document Creation Initiated' status ( 3G 207 )
Account assignment objects could not be checked ( 3G 208 )
Account assignment objects are incorrect. No substitution is possible. ( 3G 209 )
Error during calculation of taxes with tax indicator &1 ( 3G 210 )
There are several creditors with the search key &1 &2 &3 &4 ( 3G 211 )
Internal error when determining the creditor ( 3G 212 )
No creditor with the search key &1 &2 &3 &4 has been found ( 3G 213 )
Central posting lock for creditor &1 ( 3G 214 )
Posting lock in company code for creditor &1 ( 3G 215 )
Central deletion flag for creditor &1 ( 3G 216 )
Deletion flag in the company code for creditor &1 ( 3G 217 )
&1 is not permitted as a search term for debtors ( 3G 218 )
&1 is not permitted as a search term for creditors ( 3G 219 )
Internal error when determining the debtor ( 3G 220 )
No debtor has been found with the search key &1 &2 &3 &4 ( 3G 221 )
Central posting lock for debtor &1 ( 3G 222 )
Posting lock in company code for debtor &1 ( 3G 223 )
Central deletion flag for debtor &1 ( 3G 224 )
Deletion flag in company code for debtor &1 ( 3G 225 )
Entry for client &1 is missing in the client table ( 3G 226 )
Posting run &1 &2 cannot be posted: Incorrect status ( 3G 227 )
Posting run &1 &2 cannot be posted: Simulation run ( 3G 228 )
Posting run &1 &2 was not found ( 3G 229 )
Posting run &1 &2 is locked ( 3G 231 )
The system has tried to update an invalid status ( 3G 232 )
Status update has failed ( 3G 233 )
Posting run &1 &2 is locked (A rollback has occurred) ( 3G 235 )
Posting run &1 &2 was not found. (A rollback has occurred) ( 3G 236 )
Update of an invalid status (Rollback occurred) ( 3G 237 )
Status update has failed. (Rollback has occurred) ( 3G 238 )
Error during conversion of the currency amount ( 3G 240 )
Internal error: Document has not been posted ( 3G 242 )
Document has not been posted ( 3G 243 )
Error in ALE Customizing for object &1 and method &2 ( 3G 244 )
Internal error in the filter objects for object &1 and method &2 ( 3G 246 )
RFC destination is not maintained for object &1 and method &2 ( 3G 248 )
This report cannot be started without selection criteria ( 3G 250 )
No data can be selected for the lines chosen ( 3G 251 )
Int. error: Field catalog for list display could not be created ( 3G 252 )
Int. error: Field catalog for list display could not be created ( 3G 253 )
Int.error: No index entries in int. table mode_idx for selected line ( 3G 254 )
No payroll result can be found for the selected entry ( 3G 255 )
Int. error: No data has been selected for the lines chosen ( 3G 256 )
No dates selected for which revision information can be displayed. ( 3G 258 )
There is no PPOIX entry for the PPOPX entry PERNR &1 and SEQNR &2 ( 3G 259 )
Data inconsistency ( 3G 260 )
Internal error during selection of the data ( 3G 261 )
Inconsistent payroll results ( 3G 262 )
Internal error RPCIPD00 ( 3G 263 )
double click is not possible for this payroll result ( 3G 265 )
Address data is missing for personnel number &1 (infotype 0006) ( 3G 266 )
The original documents to the reverse document line items are displayed. ( 3G 268 )
Payee key &1: bank details and address data missing ( 3G 271 )
System cannot interpret feature PERID ( 3G 272 )
Personal data missing for personnel number &1 (infotype 0002) ( 3G 273 )
Payroll results of personnel number &2 are incomplete ( 3G 274 )
Address data for bank &2 (ctry &1) missing in bank master rec.(tab. BNKA) ( 3G 275 )
Combination of employee group &1 and employee subgroup &2 is invalid ( 3G 276 )
House bank account &3 does not exist (house bank &2, company code &1) ( 3G 277 )
Wage type &2: text key missing (country grouping &1, table T520S) ( 3G 278 )
Personnel number &2: infotype &1 is missing ( 3G 279 )
House bank &1 does not exist in company code &2 (table T012) ( 3G 290 )
Payment method missing from master data or Customizing ( 3G 291 )
Transfer was changed to check (new payment method is &1) ( 3G 292 )
Payment method &1 does not exist in country &2 ( 3G 293 )
Line Overflow in the Purpose for Payment Method &, PersNo & ( 3G 294 )
Sequence number &2: WPBP for personnel assignment &1 not found ( 3G 295 )
Special Processing of the Posting Item is not Permitted ( 3G 299 )
Run type &1 is not allowed ( 3G 301 )
Order or WBS element in cost distribution for account assignment type R ( 3G 302 )
Supplemental (sequence no.&1) has already been evaluated in run &2 ( 3G 303 )
Error in Customizing for cost distribution ( 3G 308 )
Posting balance of retroactive accounting chain not settled ( 3G 310 )
Sequence number &1 for personnel number &2 for run type &3 not yet posted ( 3G 311 )
Internal error when determining the creditor (search keys &1 &2 &3 &4) ( 3G 320 )
Internal error when determining the debtor (search keys &1 &2 &3 &4) ( 3G 321 )
Maximum value for amount field exceeded (document &1, line &2, amount &3) ( 3G 322 )
Enter an Appropriate Payroll Area ( 3G 323 )
Data for repeat run of sequence number & & is missing ( 3G 327 )
Unpermitted personnel number selection for repeat run ( 3G 328 )
Current value & and original value & of parameter & are different ( 3G 329 )
Internal error: No valid return value for segment found ( 3G 330 )
Current value & of field & of posting variant <> original value & ( 3G 331 )
Unpermitted posting status for repeat run of sequence number & & ( 3G 332 )
Personnel number & was already successfully processed for sequence no. & ( 3G 333 )
Could not derive the account assignment objects ( 3G 334 )
Termination after 10 attempts to start for parallel task ( 3G 338 )
No export to cost planning as no BAdI implementation is active ( 3G 342 )
No statistics available, as run was generated with the report &1 ( 3G 343 )
Incorrect configuration for complementary wage type & ( 3G 345 )
Liability wage type &: Distribution basis is missing assgmt ID & ( 3G 346 )
Error when generating the IDOCs ( 3G 353 )
There are several receiving systems for object &1 and method &2 ( 3G 354 )
Creditor search could not be executed ( 3G 355 )
Debtor search could not be executed ( 3G 356 )
Tax indicator could not be read from G/L account ( 3G 357 )
Posting period could not be determined ( 3G 358 )
Transfer posting document to ALE layer ( 3G 359 )
Posting date for special period could not be determined ( 3G 360 )
Account determination could not be performed ( 3G 361 )
TAx calculation could not be performed ( 3G 362 )
The account assignment objects could not be checked ( 3G 363 )
The document line text could not be read ( 3G 364 )
Error when converting the project structure plan element ( 3G 365 )
Number range 01 to HRPP_PDOC is full ( 3G 366 )
Number range 01 for HRPP_PDOC could not be found ( 3G 367 )
Number range 01 for HRPP_PDOC is not internal ( 3G 368 )
Internal error during number assignment ( 3G 369 )
Number range object could not be found ( 3G 370 )
Number range 01 for HRPP_PDOC cannot be created ( 3G 371 )
Internal error when defining the posting date ( 3G 372 )
Internal error when defining the account for search key &1 ( 3G 373 )
Document check not carried out due to conversion error ( 3G 374 )
Document check for G/L account documents has been performed locally ( 3G 375 )
Document check for G/L account document took place in logical system &1 ( 3G 376 )
Document check for vendor document took place locally ( 3G 377 )
Document check for vendor document took place in logical system &1 ( 3G 378 )
Document check for customer document took place locally ( 3G 379 )
Document check for customer document took place in logical system &1 ( 3G 380 )
VAT calculation took place locally ( 3G 381 )
VAT calculation took place in a logical system &1 ( 3G 382 )
Last day in the fiscal year was determined locally ( 3G 383 )
Last day in the fiscal year was determined in the logical system &1 ( 3G 384 )
Account assignment object check took place locally ( 3G 385 )
Account assignment object check took place in logical system &1 ( 3G 386 )
Determination of posting period took place locally ( 3G 387 )
Determination of posting period took place in the logical system &1 ( 3G 388 )
Vendor search took place locally ( 3G 389 )
Vendor search took place in logical system &1 ( 3G 390 )
Customer search took place locally ( 3G 391 )
Customer search took place in logical system &1 ( 3G 392 )
Account determination took place locally ( 3G 393 )
Account determination took place in logical system &1 ( 3G 394 )
Line item text was read locally ( 3G 395 )
Line item text was read in logical system &1 ( 3G 396 )
Value-added-tax code was read locally from G/L acocunt ( 3G 397 )
VAT code read from G/L account in logical system &1 ( 3G 398 )
Acc.assignment object replaced by current master cost center for employee ( 3G 399 )
Account assignment object replaced by substitute cost center ( 3G 400 )
Funds eliminated from posting line ( 3G 401 )
System error in system &1, function &2 ( 3G 403 )
Communication error with system &1, function &2 ( 3G 404 )
Internal error: Invalid return value when checking account assign. object ( 3G 405 )
Internal error: Invalid return value when checking fund ( 3G 406 )
Subsequent posting of documents is not possible: Incorrect status ( 3G 408 )
The G/L account could not be checked ( 3G 410 )
The debtor document could not be checked ( 3G 411 )
The creditor document could not be checked ( 3G 412 )
Substitute funding derived from basic pay funding. ( 3G 413 )
Basic pay funds eliminated. ( 3G 414 )
Substitution with basic pay funding is not possible. ( 3G 415 )
No substitution rule maintained for funds center. ( 3G 416 )
Substitution funding could not be determined. ( 3G 417 )
Expenditure type &1 is not funded. ( 3G 418 )
The "basic pay" expenditure type is not funded. ( 3G 419 )
Default funding is posted. ( 3G 420 )
Substitution funding determination is done locally. ( 3G 421 )
Substitution funding was determined in the logical system &1. ( 3G 422 )
No substitution rule maintained for commitment item. ( 3G 423 )
Substitute funding is not possible. ( 3G 424 )
No default funds center maintained. ( 3G 425 )
No default commitment item maintained. ( 3G 426 )
Internal error: Company ID from company code &1 is not clear ( 3G 427 )
The log can only be displayed for &2 employees ( 3G 428 )
Funds commitment reference was deleted was deleted from document item. ( 3G 429 )
Internal error: Invalid return value when checking the funds commitment ( 3G 430 )
No ISO code was found for the (internal) code &1 ( 3G 431 )
Existing month end accruals were not evaluated ! ( 3G 432 )
It is possible to reverse in a different period than which was posted in ( 3G 433 )
Month end accruals are not reversed ! ( 3G 434 )
The value added tax indicator &1 contains non-deductible input tax ( 3G 435 )
Error at INSERT in table PPDHD: DOCNUM = &1 is already available ( 3G 436 )
Internal error: Invalid return value when checking segment ( 3G 438 )
Internal error: Invalid return value when checking the business area ( 3G 439 )
Name &1 invalid for Temse object (text for posting run: &2) ( 3G 440 )
Program cannot be used with Unicode (see note 455878) ( 3G 441 )
No Entry in Internal Table for Perno &1 Seqno &2 Postnum &3 ( 3G 442 )
Data inconsistency in payroll result table FUND: finance to &1% ( 3G 443 )
EXIT_RPCIPE00_001: Symb. account &1 cannot be replaced with &2 ( 3G 444 )
Symbol. account &1 has account assignment type FO and uses EE grouping ( 3G 445 )
Adjustment of posting index for out-of-sequence has failed: & & & ( 3G 447 )
Write error: update of adjusted posting index has failed ( 3G 448 )
Internal error: & & ( 3G 449 )
Posting run &1 &2 cannot be reversed: Incorrect status ( 3G 451 )
Posting run &1 &2 cannot be reversed: Incorrect document status ( 3G 452 )
Reversal is not possible: Related run &1 &2 exists ( 3G 453 )
Posting runs with type &1 cannot be reversed ( 3G 454 )
Number range 01 for HRPP_PDOC is in the critical area ( 3G 455 )
The reverse documents cannot be posted: Incorrect status ( 3G 456 )
Termination processing for the reversal is not possible: Incorrect status ( 3G 457 )
Incorrect reverse documents in posting run &1 &2 ( 3G 460 )
Reversal posting date &1 is before &2 ( 3G 462 )
No payment run information available in table &1 (sequence number &2) ( 3G 463 )
Posting run cannot be deleted: Incorrect status ( 3G 465 )
Choose at least one of the parameters to select the runs ( 3G 466 )
No void posting: the payroll result has not been posted ( 3G 467 )
Error occurred whilst calculating tax from the gross amount ( 3G 468 )
Check replacement posting: No payment run information available ( 3G 469 )
Grant &1 cannot be posted. Derivation is not possible ( 3G 470 )
Internal error: invalid return value during grant check ( 3G 471 )
Fixed Acc Assgnt (&1/&2) cannot be posted. Further checks not possible. ( 3G 472 )
Checking the Funds Management account assignments revealed an error ( 3G 473 )
Distribution of liabilities according to expenses not permitted ( 3G 475 )
Split criteria could not be checked ( 3G 476 )
Budget period &1 cannot be posted, was deleted from document item ( 3G 477 )
The combination fund &1 - budget period &2 is not valid ( 3G 478 )
BAdI implementation for BAdI HRPAY00_PCP0 not found ( 3G 480 )
An incorrect implementation was called (should be &1, is: &2) ( 3G 481 )
Action not supported by run type &1 ( 3G 482 )
Structure for converting table COVER undefined: XPRA cancelled ( 3G 510 )
Payroll results &1: BT does not contain any payment information due to &2 ( 3G 613 )
Payroll result &2 for pers.no. &1 not found; payment is not effected ( 3G 615 )
Payroll result &2 for pers. no. &1 reversed; payment is not effected ( 3G 616 )
Payment posting is not active for country &1 for the date &2 ( 3G 621 )
Posting program &1 is not permitted ( 3G 622 )
An error occurred when determining the provider application. ( 3G 645 )
An error occurred when a Web service was called. ( 3G 647 )
Characteristics for doc. splitting/GL determined in log. system &1 ( 3G 648 )
Characteristics for doc. splitting/general ledger determined locally ( 3G 649 )
Wage type &1 exists more than once in table T52LIDIBASE ( 3G 650 )
Wage type &1 already exists in field Liability Wage Type 2 ( 3G 651 )
RT_PERSON wage types were not evaluated ( 3G 653 )
Format Data Not Correct ( 3G 656 )
'&1' could not be interpreted as a wage type --> New entry ( 3G 704 )
Data missing log variant cannot be changed/ created ( 3G 707 )
The type group &2 does not exist for &1 yet ( 3G 710 )
Type group &1 is incomplete ( 3G 711 )
&1 is already defined as &1 ( 3G 714 )
&1 has been saved without checking ( 3G 715 )
&1 already exists ( Please choose another name ) ( 3G 716 )
Please do not use any underscores in type group names ( 3G 717 )
Name '&1' contains a non-alphanumeric character ( 3G 718 )
Function group &1 does not exist yet ( 3G 721 )
No other modules can be added to function group &1 ( 3G 723 )
Module &1 already exists in another function group (&2) ( 3G 724 )
Not all key fields in table &1 can be classified ( 3G 726 )
Structure &1 does not contain field &2 ( 3G 727 )
You have not assigned a value to field &1 ( 3G 728 )
Function module &1 does not exist yet ( 3G 733 )
Field &1 has no header ( 3G 738 )
Only one more module can be added to function group &1 ( 3G 739 )
Function group &1 does not exist yet ( 3G 740 )
The application language (&1) does not match the master language (&2) ( 3G 746 )
&1 cannot have the &2 structure ( 3G 747 )
The module in table &1 does not originally contain structure &2 ( 3G 749 )
There are no other includes in function groups &2 &3 for &1 ( 3G 753 )
Field position &1 has been entered &2 times ( 3G 754 )
The header of the IMP fields can be a max.of &1 long, this header is &2 ( 3G 757 )
Table &1 cannot be displayed ( 3G 758 )
Field &1 can have a maximum of &2 decimal places ( 3G 764 )
Table &1 does not belong to HR or to Basis (DECO) ( 3G 768 )
The ISO code &1 is not recognized ( 3G 772 )
Time managment log only if logging is active ( 3G 778 )
If logging is inactive, no layout can be entered ( 3G 779 )
No data was changed ( 3G 785 )
No Currency &1 is Assigned to the Amount Field ( 3G 792 )
The header has more than 9 physical lines ( 3G 793 )
Deletion forbidden! Result was posted with posting run &1 (run type &2) ( 3G 801 )
Application: HR Payroll, components: PY-XX-TL, client: &2 ( 3G 810 )
Error when changing table T512B in XPRA &1; client &2, &3 entries ( 3G 811 )
Missing/superfluous modules in selection program &1 (&2 &3 &4) ( 3G 819 )
If an object is converted, flag the 'Reset Status' field. ( 3G 830 )
After conversion to &1 (&4), you cannot convert from &2 to &3 ( 3G 831 )
The container can only be displayed for process steps ( 3G 836 )
Please place cursor on package and choose 'Job Log for Package' ( 3G 844 )
Number range 'HR_PROCESS' does not exist. Please create the number range ( 3G 847 )
Please only select one process to be closed ( 3G 848 )
&1 is not an executable program ( 3G 854 )
Process model &1 contains several start programs ( 3G 858 )
Program &1 requires a uncond. interrupt before it is executed ( 3G 859 )
Program &1 has not PNP selection ( 3G 860 )
Only limited changes are possible to process model &1 ( 3G 862 )
It is not necessary to reset incorrect personnel number &1 ( 3G 863 )
After step &2 it is not possible to reset personnel number &1 ( 3G 864 )
Parameter &2 is missing in the interface for program &1 ( 3G 867 )
The status tables are not written in program &1 ( 3G 868 )
One or more variants of program &1 do not yet exist ( 3G 869 )
No event is triggered in program &1 (function module &2) ( 3G 870 )
The function module &2 is missing in selection program &1 ( 3G 871 )
Only program categories without PNP selection are permitted ( 3G 876 )
Process &1 could not be deleted (internal error) ( 3G 883 )
Place the cursor on a process and then call the function ( 3G 884 )
Neither the process nor the indiv. pers. nos can be deleted (->long text) ( 3G 886 )
Place the cursor on a process or step and choose 'Start' ( 3G 891 )
Background processing is not possible: Selection variant is missing ( 3G 894 )
Place cursor on step, run or package ( 3G 895 )
Counting class of period work schedule &/& not available on & ( 3H 004 )
Value must be between '&' and '&' ( 3I 000 )
Errors in check table & (&) - contact SAP administrator ( 3I 001 )
& does not exist. Error in check table &. Contact SAP admin ( 3I 009 )
Regime not supported by the employee's income category ( 3I 011 )
Savings deduction and tax reduction rate not permitted simultaneously ( 3I 014 )
Fields that do not apply to the indicated & will be reset ( 3I 017 )
Maximum value permitted not defined for part of the period in question ( 3I 021 )
No postal codes match the criteria ( 3I 023 )
Unexpected income category in Soc.Sec.processing. Contact SAP admin. ( 3I 027 )
Enter a valid Social Security regime first ( 3I 028 )
There is more than one record in infotype & (&) for this period ( 3I 035 )
(reserved) ( 3I 036 )
Basis amount level will be set to & ( 3I 037 )
Maintain infotype I0331 consistent with infotype I0332 ( 3I 040 )
& '&' does not exist ( 3I 060 )
Regime master data missing ( 3I 103 )
Fields not applicable to the specified & will be reset ( 3I 104 )
Cumulation wage type & does not have custom wage types in V_T596J view ( 3I 137 )
Number of daily hours must be equal or lower than & ( 3I 138 )
Number of annual hours must be equal or lower than & ( 3I 139 )
Annual estimation wage type & not found ( 3I 140 )
Number of weekly hours should be equal or lower than & ( 3I 141 )
The tax code records & were updated in the period ( 3I 156 )
Tax code & has non reported values in the period ( 3I 158 )
This function is deactivated ( 3I 172 )
Customize date for subapplic.TMIN in view V_R596D (see SAP Note 2015040) ( 3I 173 )
Choose option 'Every month since January' (see SAP Note 2015040) ( 3I 174 )
Adjustment of &1 negative for &2. A retro is necessary since its payment. ( 3I 228 )
Code P per. &1 in &2 not processed: value 0 and days different from 0 ( 3I 258 )
Indicate IMSS registration number ( 3L 001 )
Indicate number of days/hours ( 3L 003 )
Incorrect municipal code ( 3L 004 )
You have not specified any discount for the employee ( 3L 006 )
IMSS registration no. incomplete. It must be 11 digits ( 3L 025 )
IMSS registration no. duplicated in employee no. & ( 3L 027 )
CURP number duplicated in the employee number & ( 3L 028 )
The indicated period number is not monthly ( 3L 032 )
The indicated period number is not bimonthly ( 3L 033 )
Select a contribution total to report ( 3L 034 )
The specified wage type & is inconsistent in field & table T7MX50 & ( 3L 037 )
Wage type invalid for & ( 3L 040 )
Proportional payment may only be made before December ( 3L 042 )
Incorrect monthly percentage ( 3L 053 )
Error in function module & ( 3L 057 )
Year must be same for date fields ( 3L 064 )
There are no wage types to report for the selection parameters ( 3L 067 )
Error in user job call ( 3L 068 )
Profit to be shared cannot equal zero in batch output mode ( 3L 070 )
Schema & does not exist in schema directory ( 3L 073 )
Marital status in infotype 0002 does not agree with spouse subtype ( 3L 074 )
You cannot execute this evaluation directly ( 3L 076 )
Wage type invalid for infotype Time quota compensations ( 3L 094 )
There is no additional info on area & / subarea & ( 3L 103 )
No employer record with key & available ( 3L 105 )
There is no IMSS occupational hazard data in & / & / & ( 3L 118 )
Data existing or less than last period & & & for occupational hazard ( 3L 119 )
Short-time day does not correspond with data in infotype 0007 ( 3L 120 )
Error with control program in CALL interface ( 3L 124 )
Error on calling function module & ( 3L 125 )
System error TemSe notified ( 3L 126 )
For this country there is no relevant economic zone for payroll ( 3L 141 )
Time of working day does not correspond to data of infotype 0007 ( 3L 142 )
You cannot select incapacity and absence ( 3L 143 )
You must execute the payroll in test mode to calculate the SDI ( 3L 150 )
Do not flag any integrated daily wage parameter ( 3L 151 )
Flag an official format for IMSS registration notification ( 3L 156 )
Flag an official format for IMSS wage modification notification ( 3L 157 )
Flag an official format for IMSS deregistration notification ( 3L 158 )
Select at least one type of IMSS notification ( 3L 159 )
Select only one employee to see employee details ( 3L 180 )
Final payment date incorrect ( 3L 184 )
Calendar type of wage type & is different to that of wage type & ( 3L 191 )
Valuation of daily wage or SDI only accepts wage types with & ( 3L 192 )
Average valuation only accepts wage types with & ( 3L 193 )
You will not perform settlement of savings fund ( 3L 194 )
You must not indicate IMSS affiliation number for this type of relation ( 3L 217 )
Error when saving correction activation of group &1 number &2 ( 3L 218 )
Daily minimum salary for economic zone &1 on date &2 not available ( 3L 219 )
First 4 CURP positions must be alphabetical "&" ( 3L 222 )
Incorrect date of birth in CURP "&" in & ( 3L 223 )
In & there are alphabetical characters "&" ( 3L 224 )
Gender in CURP does not coincide. Must be &, not & ( 3L 225 )
There are unauthorized characters "&" in the state ( 3L 226 )
There are unauthorized characters "&" in CURP ( 3L 227 )
Incomplete CURP format ( 3L 228 )
You need to specify state code ( 3L 229 )
State code in CURP "&", does not correspond to Mexican entities ( 3L 231 )
You need to specify internal consonants in CURP ( 3L 233 )
There are unauthorized characters "&" in the field for & ( 3L 234 )
There are unauthorized accents for the IMSS "&" in the field for & ( 3L 235 )
Unable to calculate tax for two different cost centers ( 3L 242 )
There is no daily integrated wage for & / & in the infotype 0372 ( 3L 314 )
There is no identification number for & / & / & in infotype 0185 ( 3L 371 )
It is not possible to open TemSe file ( 3L 372 )
There is no balance for this credit in the last payroll ( 3L 374 )
The discount percentage is incorrect ( 3L 378 )
There is no ident. document for & / & in infotype 0185 subtype & & ( 3L 385 )
Release date not permitted ( 3L 403 )
You need to delete debt infotype ( 3L 404 )
Specify dividend and divisor or neither of them ( 3L 407 )
Unit does not correspond to type of discount for fixed amount ( 3L 408 )
Unit does not correspond to type of discount for percentage ( 3L 409 )
Specify a discount percentage ( 3L 412 )
Delete fixed quota for percentage discount ( 3L 413 )
Specify an amount in fixed quota ( 3L 414 )
Delete percentage for discount by fixed quota ( 3L 415 )
Specify currency for fixed quota ( 3L 416 )
Specify a unit/interval ( 3L 418 )
Payment date & is previous to payment date of last payroll & ( 3L 505 )
Payment date & is previous to last payroll & ( 3L 506 )
No additional information exists for company (BUKRS) &. ( 3L 805 )
Function module & for car benefit calculation does not exist. ( 3N 055 )
Pers.no had a negative amount &1 in sum wage type &2 ( 3N 082 )
NP class &1 amount &2 should be not less than &3 amount &4 ( 3O 099 )
No country code found in table T7TW1P for &1 ( 3O 260 )
Set labor type consistent with NP class &1 ( 3O 263 )
Except for integration data, personnel no. &1 has been deleted completely ( 3O 291 )
The selected personal aera and subarea don't have the same NHIID ( 3O 315 )

Length: 682260 Date: 20191022 Time: 004533

Count: 2810     sap01-206 ( 1291 ms ) This documentation is copyright by SAP AG.

Our Service

Looking for Support? Questions?

The

Consolut

Callback-Service

Leave us your contact details and we will call you back. Panels marked with * are mandatory.