Messages

Complete Message Docu Documentation From SAPMTRAN008 up to SF350

This documentation is copyright by SAP AG.
Count: 2752 Skipped: 9
Message Docu
Description
Cuation: control table will be activated (see long text) ( SAPWL 012 )
Function Module &1 Parameter &2 not allowed with SAP ACO ( SAP_ACO 032 )
Function Module &1 Exception &2 not allowed with SAP ACO ( SAP_ACO 033 )
Function Module &1 Type &2 not allowed with SAP ACO ( SAP_ACO 036 )
Property &1 does not have a valid prefix ( SAP_NWBC 027 )
Target system "&1" (or "&1_HTTP" or "&1_HTTPS") for entry &2 is invalid. ( SAP_NWBC 035 )
Target system alias "&1" (or "&1_RFC") for entry &2 is invalid. ( SAP_NWBC 036 )
RFC destination for alias &1 is undefined or incomplete ( SAP_NWBC 037 )
There is no cycle for this project ( SASAP 001 )
Your user ID is not assigned to a project ( SASAPIA 028 )
Data structures were changed; processing no longer possible ( SAT 002 )
STACK display is not possible here ( SAT 004 )
User &1 is not authorized to delete traces of user &2 ( SAT 010 )
Limitation to this subarea has already taken place ( SAT 099 )
No memory exists for hierarchy comparisons ( SAT 101 )
Message for selftest of CL_SATC_AC_TEXT_HANDLE_T100 ( SATC_ABAP_CHECK 100 )
Result probably incomplete – failures occurred during check run ( SATC_ABAP_CHECK 410 )
Execution of check seemingly aborted ( SATC_ABAP_CHECK 411 )
Check execution aborted ( SATC_ABAP_CHECK 412 )
Exception occurred during check execution ( SATC_ABAP_CHECK 413 )
Error in behaviour during check execution ( SATC_ABAP_CHECK 414 )
Prerequisite not met ( SATC_ABAP_CHECK 415 )
Error in ATC while processing findings of executed checks ( SATC_ABAP_CHECK 419 )
Object not checkable, due to defects in object ( SATC_ABAP_CHECK 600 )
Check not executable, due to missing prerequisites ( SATC_ABAP_CHECK 601 )
Check only partially executable, due to missing prerequisites ( SATC_ABAP_CHECK 602 )
Object not checkable, due to defects in check ( SATC_ABAP_CHECK 603 )
ATC check run aborted, due to missing prerequisites ( SATC_ABAP_CHECK 604 )
Implementation of check probably changed after check execution ( SATC_ABAP_CHECK 605 )
Check has reported a problem not interpretable by ATC ( SATC_ABAP_CHECK 606 )
Execution of check not completely successful ( SATC_ABAP_CHECK 607 )
Use of object providers not supported (see long text) ( SATC_CI_CFG 001 )
Check run scheduled but not released (check authorisations) ( SATC_CI_CFG 005 )
Modifications cannot be checked in &1 (see long text) ( SATC_CI_CFG 006 )
Approving this exemption conflicts with rejected exemption requests ( SATC_CI_MODE_MSGS 000 )
This exemption is redundant due to other more general exemptions ( SATC_CI_MODE_MSGS 001 )
The exemptions overshadows rejected exemption requests ( SATC_CI_MODE_MSGS 002 )
The email address of user &1 is unknown. No notification has been sent. ( SATC_CI_MODE_MSGS 011 )
Navigation with RFC destination & might fail - press F1 or Help button ( SATC_CI_MODE_MSGS 020 )
It is recommended to apply baseline for checks with stable identity only ( SATC_CI_MODE_MSGS 099 )
Index ID '&1' is transformed during an upgrade to '~&2' or '^&2' ( SAUL_ATC_CHECKS 001 )
Index ID '&1' is transformed during an upgrade to '^&2' ( SAUL_ATC_CHECKS 002 )
Invalid Object ( SAUTH 008 )
Internal Error ( SAUTH 010 )
Enter a task type ( SAWE_BO_SA 006 )
Wrong currency &1 specified ( SAWE_BO_SA 012 )
Assignment cannot be deleted: &1/&2/&3. Working time already entered ( SAWE_BO_SA 013 )
Assignment cannot be deleted: &1/&2/&3. Forecast entry is locked ( SAWE_BO_SA 014 )
Assignment period cannot be shortened: &1/&2/&3 ( SAWE_BO_SA 019 )
Assignment cannot be changed: &1/&2/&3 ( SAWE_BO_SA 021 )
Inconsistent skill in assignments grouped for forecast: &1/&2/&3 ( SAWE_BO_SA 022 )
Assignment cannot be deleted: &1/&2/&3 ( SAWE_BO_SA 026 )
Task type must be initial ( SAWE_BO_SA 027 )
Change not possible as CATS data exists in the original interval ( SAWE_BO_SA 032 )
The &2 &1 is different from that of the assignment ( SAWE_BO_SA 033 )
Actuals of &1 exceed staff assignment hours per work day ( SAWE_BO_SA 039 )
Staff assignment can be archived, but error in setting archive flag ( SAWE_BO_SA 104 )
Enter retention period days or a retention period date ( SAWE_BO_SA 105 )
Limit exceeded for &3 &4 ( SAWE_BO_SA 156 )
Expected days exceeded for &3 &4 ( SAWE_BO_SA 157 )
Employee &1 cannot be replaced; assignment expired ( SAWE_BO_SA 613 )
E-mail to employee &1 (removed from object id/type &2) not sent ( SAWE_BO_SA 725 )
E-mail(s) to &1 employee(s) not sent due to data error; see mail status ( SAWE_BO_SA 727 )
You are not authorized to maintain enhanced forecast objects ( SAWE_BO_SA 739 )
You are not authorized to run trans. to maintain enhanced forecast objs ( SAWE_BO_SA 740 )
Customer &1 is blocked; see long text ( SAWE_BO_SA 800 )
Sold-to party &1 is blocked; see long text ( SAWE_BO_SA 801 )
Search results do not include blocked data ( SAWE_BO_SA 802 )
Assignment validity ends on &1; end date &2 cannot exceed &1 ( SAWE_BO_SA_TIME_PS 034 )
End date &1 exceeds planning time frame, which ends on &2 ( SAWE_BO_SA_TIME_PS 035 )
Error while processing employee &1; check employee data ( SAWE_MSG 003 )
Company code cannot be determined for specific task assigned to party ID ( SAWE_PSE_SE 003 )
Planning granularity has not been defined in Customizing ( SAWE_PSE_SE 004 )
Value for element &2 is too long ( SAWE_PSE_SE 005 )
Invalid WorkEngagementReferenceType and WorkEngagementReferenceID ( SAWE_PSE_SE 010 )
Element &1 has an invalid format ( SAWE_PSE_SE 011 )
Invalid week provided for the element &2 ( SAWE_PSE_SE 012 )
Invalid month provided for the element &2 ( SAWE_PSE_SE 013 )
Element &1 is not supported ( SAWE_PSE_SE 016 )
Element &1 is not supported ( SAWE_PSE_SE 018 )
Only enter a value for one of the validity elements ( SAWE_PSE_SE 037 )
Invalid combination of WorkEngagementReference & StaffAssignmentItemUUID ( SAWE_PSE_SE 047 )
For planning granularity &1 planning time frame value &2 is invalid ( SAWE_TIME_PS_GEN 001 )
For planning granularity &1 display time frame value &2 is invalid ( SAWE_TIME_PS_GEN 002 )
For planning granularity &1 planning unit value &2 is invalid ( SAWE_TIME_PS_GEN 003 )
Default automatic forecast not possible for &1 ( SAWE_TIME_PS_GEN 013 )
Search results do not include blocked data; see long text ( SAWE_WE_POWL 008 )
Error sending data to Solution Manager Diagnostics ( SA_DIAG 001 )
Adjust the installation path (see long text) ( SA_DIAG 006 )
The specified insallation path is not correct (see long text) ( SA_DIAG 017 )
The subnodes of a structure node could not be saved ( SA_IMPORT 015 )
Structure element '&4' has not been imported ( SA_IMPORT 017 )
Assignments to a structure element could not be saved ( SA_IMPORT 018 )
The structure element with ID '&1' already exists elsewhere ( SA_IMPORT 020 )
Cannot display user data from a remote system ( SB 097 )
Cannot display request ( SB 098 )
No detail information exists for this field ( SB 099 )
& ( SB 100 )
Choose one object type only ( SB 101 )
Choose a version ( SB 102 )
Compare two versions only with each other ( SB 103 )
Choose one version only ( SB 104 )
Choose two versions for comparison ( SB 105 )
Position cursor on valid row ( SB 106 )
No versions found ( SB 107 )
Select using 'X', 'x' or F2 ( SB 108 )
Version management initialized ( SB 110 )
No selected version objects exist to be displayed ( SB 111 )
No selected version objects exist to be deleted ( SB 112 )
The selected version objects have already been deleted ( SB 113 )
No objects selected ( SB 114 )
No more processing necessary ( SB 115 )
The version directory was restored ( SB 116 )
Position the cursor on a valid line ( SB 119 )
No more differences found ( SB 120 )
No more matches found ( SB 121 )
Error in target system ( SB 123 )
No connection to target system/error in communication ( SB 124 )
Version management: Objects check for transport & ( SB 125 )
The selected block was copied to the X clipboard ( SB 127 )
Original system of the object not defined in object directory TADIR ( SB 128 )
Version management: No free memory available ( SB 129 )
No destinations defined in table RFCDES for SAP systems ( SB 130 )
The object does not exist in the target system ( SB 131 )
No new delta could be generated ( SB 133 )
No connection selected ( SB 134 )
Version management: Inconsistencies found ( SB 135 )
Version management: Inconsistencies resolved ( SB 136 )
Remote system &: Remote comparison not possible ( SB 137 )
Reconstruction not possible, version management data missing ( SB 143 )
Object & & & does not exist or cannot be compared ( SB 156 )
Version management: Make backup versions before importing from & ( SB 158 )
Version management: Make versions after importing & ( SB 164 )
The specified destination does not match the target system ( SB 170 )
Enter an RFC destination for the system & ( SB 171 )
There are no SAP systems that can be selected directly ( SB 172 )
& & No version made, object does not exist or no version can be made ( SB 176 )
Inconsistent data in version management ( SB 177 )
You cannot make versions of objects of the type &1 &2 ( SB 178 )
Object &1 &2 does not exist, no version created ( SB 179 )
Object &1 &2 not locked, no version created ( SB 180 )
No active version exists, no version created ( SB 181 )
No modified version exists, no version created ( SB 182 )
Archived data deleted and index entries generated ( SB 200 )
Error when deleting the archived versions ( SB 202 )
Test run: No versions archived ( SB 203 )
The required version was not found in the archive index ( SB 207 )
The index used for the archive file & is inconsistent ( SB 208 )
The version & & & could not be restored ( SB 209 )
Version directory in the archive does not match the directory on the DB ( SB 220 )
&1 ( SB 226 )
Error in remote connection to SAP system &1 (destination &2): &3&4 ( SB 300 )
Request &1 not found in SAP system &2 (destination &3) ( SB 301 )
Request &1 not found in SAP system &2 ( SB 302 )
Position the cursor on a request or task ( SB 303 )
Object &1 &2 &3 locked in request &4; object cannot be copied ( SB 305 )
Error in remote connection to SAP system with destination &1 ( SB 306 )
Cannot compare object types &1 and &2 ( SB 307 )
An object of type &1 has no source code ( SB 309 )
Delta does not match the target object &1 &2, version &3 from system &4 ( SB 310 )
Internal error in Correction Workbench ( SB 311 )
Unsuitable delta, cannot copy changes ( SB 312 )
Object unchanged in the reference correction, do not need to copy changes ( SB 313 )
Initial source code identical, changes can be copied ( SB 314 )
Request &1 invalid; copy changes in &2 ( SB 315 )
Object locked in &1; copy changes in &2 only ( SB 316 )
Object &1 &2 does not yet exist, create it first ( SB 317 )
Initial source code not identical, changes can be copied ( SB 318 )
Cannot copy changes for objects of this type ( SB 319 )
Position the cursor on a request or task ( SB 320 )
The applied changes can be canceled ( SB 321 )
Confirmation: Copy object changes ( SB 323 )
Confirmation: Cancel changes ( SB 324 )
Object changes were applied ( SB 328 )
Error in remote connection: &1&2&3&4 ( SB 330 )
Error in remote connection to destination &1: &2&3&4 ( SB 331 )
Error in remote connection to SAP system &1: &2&3&4 ( SB 332 )
No request found for task &1, processing canceled ( SB 339 )
Note &1 does not have corr. instructions that can be copied automatically ( SB 340 )
Note &1 does not exist or does not contain any correction instructions ( SB 341 )
The objects can only be added to request &1 ( SB 342 )
Enter a valid modularization unit ( SB 344 )
Use this function to compare requests or tasks ( SB 346 )
No suitable request in SAP system &1 ( SB 347 )
Changes can be copied ( SB 348 )
Not all changes were applied; see detail display ( SB 349 )
Use the remote comparison function in version management ( SB 352 )
RFC destination &1 does not exist in system &2 ( SB 360 )
No system data defined in SISM for SAP system & ( SB 361 )
RFC error: System not available for RFC destination &1 ( SB 362 )
Object can only be modified using Modification Assistant ( SB 363 )
Cannot display changes; no versions exist ( SB 366 )
Cannot display changes; no version exists ( SB 367 )
Not configured; edit table CWBVDBSCFG in SID &1; see long text ( SB 420 )
A number of errors have occurred - see long text ( SBCF 003 )
Assignment data inconsistent and/or incomplete ( SBCF 004 )
Call the content object maintenance transaction manually ( SBCF 006 )
Parameter &1 overwritten by user-specific value (&2) ( SBCF 015 )
You are not authorized to perform this action (area &1, activity &2) ( SBCF 075 )
Error in where-used list for a business object ( SBCF2 001 )
No content objects for context &1 ( SBCF3 003 )
No top-level object types in the metadata ( SBCF3 007 )
No authoring service for object type &1 in the metadata ( SBCF3 008 )
No object types for system group &1 and role &2 ( SBCF3 013 )
Data not found for object with search string &1 and object type &2 ( SBCF4 146 )
The current transaction is not the session transaction ( SBCF4 171 )
The current transaction could not be found ( SBCF4 173 )
Session transaction could not be determined ( SBCF4 174 )
Error while determining the spool parameters for the background job ( SBCF4 197 )
Object of type &1 not registered for the TCD service ( SBCF4 198 )
Spool paramaters are invalid for performing a background job ( SBCF4 199 )
The session transaction has status &1 instead of the expected status 1 ( SBCF4 200 )
Error running background report &1 ( SBCF4 203 )
Background job &1 has been scheduled but not released for execution ( SBCF4 205 )
Temporary data for table &1 not found ( SBCF4 208 )
Text update ended with warnings ( SBCF4 213 )
Text update ended with errors ( SBCF4 214 )
No implementations of BADI &1 ( SBCF4 267 )
Assignment &1: Object ID for content object reference is initial ( SBCF4 501 )
Assignment &1: No content object reference ( SBCF4 502 )
Assignment &1: The ID for the client application is initial ( SBCF4 503 )
Assignment &1: The business entity ID is initial ( SBCF4 505 )
Assignment &1: Creation time value is initial ( SBCF4 507 )
Assignment &1: Creator is initial ( SBCF4 508 )
Assignment &1: Time of last change is initial ( SBCF4 509 )
Assignment &1: Last changer is initial ( SBCF4 510 )
Assignment &1: Technical name of object reference not unique ( SBCF4 555 )
Assignment &1: Content object not in provider ( SBCF4 563 )
No connection data for service &1 (context: &2/&3) ( SBCF5 001 )
No unambiguous connection data to service &1 (context: &2/&3) ( SBCF5 002 )
Configuration request &1 is not unique ( SBCF5 006 )
Object &1 is still used actively and cannot be deactivated ( SBCF5 012 )
Configuration not yet completed ( SBCF5 042 )
Configuration log could not be loaded ( SBCF5 064 )
Invalid value for the configuration mode (&1) ( SBCF5 075 )
Request &1 does not contain any assignments relevant for activation ( SBCF5 082 )
Request &1 does not contain any assignments relevant for loading ( SBCF5 083 )
Invalid value for the transport object (&1) ( SBCF5 085 )
Object &1 is still used actively and cannot be unloaded ( SBCF5 088 )
Configuration terminated ( SBCF5 090 )
Configuration process not performed for service group &1 ( SBCF5 094 )
Service delivers no value for parameter &1 ( SBCF5 102 )
Automatic status query not possible for configuration request &1 ( SBCF5 107 )
No free configuration request number found for system landscape ( SBCF5 113 )
Connection problems: No connection to destination &1 ( SBCF5 136 )
Connection problems: Check all connections in context &1 ( SBCF5 137 )
Service &1 returns status 'Not Started' ( SBCF5 138 )
Service passed no value for parameter &1, object &2 (type &3) ( SBCF5 139 )
Configuration processes not performed ( SBCF5 140 )
Connection problems: No connection to service provider &1 in context &2 ( SBCF5 143 )
Unallowed object scope value (&1) ( SBCF5 157 )
Update: Object &1 (type &2) need not be activated ( SBCF5 159 )
Object type &1: Service &2 not assigned to a service group ( SBCF5 164 )
A configuration is running for context &1/&2: &3 ( SBCF5 168 )
&3 configurations running for context &1/&2 ( SBCF5 169 )
Choose a new expiry date greater than &1 ( SBCF5 181 )
Process post-processing service &1: Asynchronous processing not allowed ( SBCF5 216 )
Active configuration adjusted ( SBCF5 226 )
Request &1 does not contain any objects for loading ( SBCF5 245 )
Request &1 does not contain any objects for activation ( SBCF5 246 )
Configuration is already running in runtime system: &1 ( SBCF5 247 )
&1 configurations are running in the runtime system ( SBCF5 248 )
No connection data for service &1 ( SBCF5 249 )
Automatic status query for configuration requests not possible ( SBCF5 276 )
Configuration in runtime system cancelled ( SBCF5 346 )
Runtime system not configured ( SBCF5 348 )
Incidents not forwarded to the Health Check Framework ( SBCF5 358 )
No ID for object: &1 (type &2) ( SBCF7 014 )
Invalid combination reading Business Content data ( SBCF7 018 )
Fine-tuning recording is not active in system &1 ( SBCF7 030 )
BCE: No support package queue ID received ( SBCF7 031 )
Fine-tuning recording is inactive in system &1 ( SBCF7 040 )
RFC connection error: &1&2&3&4 ( SBCF8 002 )
No data received for object &1 (type &2) ( SBCF8 008 )
No ID given for the object with search string &1 (type &2) ( SBCF8 009 )
Serious communication error to BCE Remote/Transport Layer WebService ( SBCF8 017 )
No proxy found for SP &3 with client context &1 (&2) ( SBCF8 020 )
Remote system error: &1&2&3&4 ( SBCF8 021 )
Destination &1 does not exist ( SBCF8 023 )
Invalid type for destination &1 ( SBCF8 024 )
Fine tuning recording is not active in the current system ( SBCFB 025 )
Not all transports of FT session &1 could be exported ( SBCFB 041 )
The fine-tuning recording setting is invalid ( SBCFB 076 )
Several registered system IDs for client context &1 ( SBCFB 120 )
System ID &2, in client context &1, has more than three characters ( SBCFB 121 )
Fine tuning session &1 contains no transport requests ( SBCFB 125 )
Only a local transport request could be created in system &1 ( SBCFB 524 )
No fine-tuning export is possible in system &1(&2) ( SBCFB 525 )
Fine tuning service is not supported for object type &1 ( SBCFC 008 )
Messages for content provider &1 ( SBCFE 012 )
No messages in update request - J2EE update? ( SBCFE 017 )
Messages for content provider &1 can no longer be found ( SBCFE 018 )
Content object &1 (&2) adjusted during update ( SBCFE 037 )
You are not authorized to use the test transaction ( SBCFT_A1S_TEST_UI 001 )
SAP object copied ( SBCFT_A1S_TEST_UI 003 )
Customer version copied ( SBCFT_A1S_TEST_UI 004 )
No content objects found for &1 ( SBCFT_SP_ABAP 005 )
Fine-tuning not supported for &1 ( SBCFT_SP_ABAP 016 )
T100 test entry ( SBCFT_SP_ABAP 018 )
Work center &1 look-up error ( SBCFX1 003 )
Work Center Test Mode is Active ( SBCFX1 020 )
Adjustment &1 not performed for subobject &2 in layer &3 ( SBCFX1 025 )
&1 is obsolete; use &2 ( SBCOMS 004 )
The attachments entered are not printed or sent ( SBCOMS 201 )
Could not determine disclosures ( SBCOMS 626 )
Disclosures being edited by user & ( SBCOMS 632 )
Error while reloading table &1 from archive ( SBCOMS 720 )
Central User Administration is active, only display of user addresses ( SBCS_ADM 011 )
Cannot execute or schedule report &1 ( SBCS_ADM 100 )
Document could not be moved ( SBCS_SEND 007 )
Error moving snap-shot &1 to table &2 ( SBC_XPRA 003 )
No hits ( SBDS 001 )
Bar code error. Target content repository does not match ( SBDS 003 )
Bar Code &2 Already Exists ( SBDS 006 )
Error in bar code processing. Not possible to delete in table & ( SBDS 007 )
Error when searching for links. Document is not unique ( SBDS 039 )
Select an object ID first ( SBDS 312 )
No relationships exist for document &. It is not possible to delete ( SBDS 329 )
Document & (version: &, var-Id: & ) cannot be transported ( SBDS 330 )
The document cannot be transported ( SBDS 331 )
Document & cannot be transported ( SBDS 332 )
Internal error when starting application ( SBDS 334 )
The application selected was not found ( SBDS 335 )
Enter the target directory for the export ( SBDS 340 )
The target path specified does not exist ( SBDS 341 )
Note function not available for these documents ( SBDS 356 )
It is not possible to reassign the selected document ( SBDS 357 )
SAP GOS documents cannot be processed using the BDN ( SBDS 362 )
No notes can be created for SAP GOS documents. ( SBDS 363 )
No assignment has been made for class name &1, class type &2 ( SBDS 366 )
No suitable application was found ( SBDV 018 )
Original language &1 differs from logon language &2 ( SBD_MESSAGES 027 )
&1 is still used and could not be deleted ( SBD_MESSAGES 201 )
Enhancement Category ( SBD_MESSAGES 300 )
Can be enhanced in any way ( SBD_MESSAGES 301 )
Can be enhanced and character-like or numeric ( SBD_MESSAGES 302 )
Can be enhanced character-like ( SBD_MESSAGES 303 )
Cannot be enhanced ( SBD_MESSAGES 304 )
Unclassified ( SBD_MESSAGES 305 )
Delivery Class ( SBD_MESSAGES 310 )
Application table for master data and transaction data ( SBD_MESSAGES 311 )
Customer table for data entered only by the customer ( SBD_MESSAGES 312 )
Table used as a repository for temporary data ( SBD_MESSAGES 313 )
Customizing table, protected against SAP Update ( SBD_MESSAGES 314 )
Control table, SAP and customer have separate key areas ( SBD_MESSAGES 315 )
System table, maint. only by SAP, change = modification ( SBD_MESSAGES 316 )
System table, contents transportable by separate TR objects ( SBD_MESSAGES 317 )
Display and Maintenance ( SBD_MESSAGES 320 )
Display/maintenance allowed ( SBD_MESSAGES 321 )
Display/maintenance not allowed ( SBD_MESSAGES 322 )
Display/maintenance allowed to a limited extent ( SBD_MESSAGES 323 )
Transparent Database Table ( SBD_MESSAGES 331 )
Global Temporary Table ( SBD_MESSAGES 334 )
Activation Type ( SBD_MESSAGES 340 )
Can be activated directly from the ABAP Dictionary ( SBD_MESSAGES 341 )
The runtime object must be generated using a C program ( SBD_MESSAGES 342 )
Must be adjusted manually in the C program when the table is changed ( SBD_MESSAGES 343 )
Required before R3TRANS runs ( SBD_MESSAGES 344 )
Short Description ( SBD_MESSAGES 350 )
Primary key as INVERTED HASH ( SBD_MESSAGES 362 )
Foreign Key Short Description ( SBD_MESSAGES 363 )
Foreign Key Type ( SBD_MESSAGES 364 )
Input Value Check on Dynpro ( SBD_MESSAGES 365 )
Message Class ( SBD_MESSAGES 366 )
Message Number ( SBD_MESSAGES 367 )
Currency Field ( SBD_MESSAGES 368 )
Unit Field ( SBD_MESSAGES 369 )
Key fields/key candidates ( SBD_MESSAGES 370 )
No key fields/key candidates ( SBD_MESSAGES 371 )
Replacement Object ( SBD_MESSAGES 373 )
Output Style for Decfloat Types ( SBD_MESSAGES 380 )
Normal Output Style ( SBD_MESSAGES 381 )
Sign right Output Style ( SBD_MESSAGES 382 )
Scale-preserving Output Style ( SBD_MESSAGES 383 )
Scientific Output Style ( SBD_MESSAGES 384 )
Scientific with leading zero Output Style ( SBD_MESSAGES 385 )
Scale-preserving scientific Output Style ( SBD_MESSAGES 386 )
Engineering Output Style ( SBD_MESSAGES 387 )
Mode &1 is not allowed ( SBEIF 042 )
All texts are read in the original language of object in mode &1 ( SBEIF 048 )
You cannot read names in mode &1 only ( SBEIF 050 )
You cannot read industry sector names (field ADDON) in mode &1 ( SBEIF 051 )
Parameter &1 is ignored if parameter &2 is filled ( SBEIF 053 )
Object &1 &2 is in the foreign namespace &3 ( SBEIF 056 )
Class &1 projects cannot be used ( SBEIF 059 )
Report &1 could not become a step in job &2: RC = &3 ( SBEIF 061 )
You are not authorized to edit this method ( SBFB 006 )
You are not authorized to display this method ( SBFB 007 )
The method contains invalid conditions or formulas: "&1" | "&2" ( SBFB 012 )
The superior element could not be determined ( SBF_BW 003 )
The requested information has not been found ( SBF_BW 006 )
Function module &1 has not been found ( SBF_BW 007 )
No further occurences of search term &1 were found ( SBF_BW 008 )
Administrator mode for project administration has been activated ( SBF_BW 009 )
There is a more up-to-date version of this Transaction ( SBF_BW 012 )
Only released BAPIs are displayed ( SBF_BW 013 )
The HTML control on this computer is obsolete ( SBF_BW 016 )
An error has occurred when executing &1 ( SBF_BW 025 )
Unknown request "&1" in the HTML page ( SBF_BW 026 )
Navigation is not planned ( SBF_BW 032 )
A type already exists with the name &1 ( SBMIG 022 )
System will not migrate object type &1 (migration exception) ( SBMIG 302 )
Migration information on object type &1 not available (view VSBMIGOT) ( SBMIG 303 )
Did not perform generation run for object type &1 ( SBMIG 304 )
Name mapping for object type &1 not available ( SBMIG 370 )
Name mapping not available for &1 &2 &3 ( SBMIG 371 )
Transaction does not exist in system &2 ( SBM_REFOBJ 001 )
Report does not exist in system &2 ( SBM_REFOBJ 002 )
Specify an existing IMG object ( SBM_REFOBJ 003 )
Specify an existing BC Set ( SBM_REFOBJ 004 )
Specify an existing transport request ( SBM_REFOBJ 005 )
Specify an existing test case ( SBM_REFOBJ 006 )
Specify an existing eCATT test configuration ( SBM_REFOBJ 007 )
Object does not exist in system &2 ( SBM_REFOBJ 009 )
Specify existing NW content (see long text) ( SBM_REFOBJ 012 )
Function Module for the Action Not Found ( SBM_REFOBJ 013 )
The link cannot be found ( SBM_REFOBJ 030 )
SAP object type & is not a centrally approved object type ( SBO_MSG 012 )
Cannot retrieve status for the SAP object type & ( SBO_MSG 013 )
Cannot delete Object Type &, as it is already in use ( SBO_MSG 014 )
No favorites will be available the next time a program is started ( SBPT_FWWP 101 )
Folder '&' does not have a key ( SBPT_FWWP 102 )
& favorites will not be available the next time a program is started ( SBPT_FWWP 103 )
& favorites will not be available the next time a program is started ( SBPT_FWWP 104 )
Favorites could not be saved ( SBPT_FWWP 105 )
Tree control update caused an error ( SBPT_FWWP 201 )
Reassignment not possible for data record &1 ( SBRG 006 )
You cannot reassign individual material items ( SBRG 007 )
'&1' does not implement interface 'IF_SBTM_TAF_TASK_AGENT' ( SBTM_MTA 112 )
'&1' does not implement interface 'IF_SBTM_MTA_AGENT_EXTENSION' ( SBTM_MTA 113 )
Select a valid responsibility type ID for responsibility determination ( SBTM_MTA 117 )
Errors in task type '&1' referenced in action rule '&2' ( SBTM_MTA 122 )
Errors in the responsibility type binding of action rule '&1' ( SBTM_MTA 124 )
Invalid responsibility binding in action rule '&1' ( SBTM_MTA 131 )
Invalid business object node type ID used in action rule '&1' ( SBTM_MTA 132 )
Errors in the relevance condition of action rule '&1' ( SBTM_MTA 133 )
Errors in the create action condition of action rule '&1' ( SBTM_MTA 134 )
Errors in the change action condition of action rule '&1' ( SBTM_MTA 135 )
Errors in the complete action condition of action rule '&1' ( SBTM_MTA 136 )
Errors in the cancel action condition of action rule '&1' ( SBTM_MTA 137 )
Action rules '&1' and '&2' have identical metadata ( SBTM_MTA 143 )
Task type '&1' referred in action rule '&2' is used in other task agents ( SBTM_MTA 146 )
Task agent was not activated ( SBTM_MTA 153 )
Task agent saved but not registered with the latest data ( SBTM_MTA 154 )
Task agent does not need to be activated ( SBTM_MTA 156 )
Responsibility definition is missing for action rule '&1' ( SBTM_MTA 162 )
Task agent class '&1' does not exist ( SBTM_MTA 188 )
Task agent cannot be changed with the current system settings ( SBTM_MTA 198 )
Use of task type with usage type #AE# in action rule #&1# is prohibited ( SBTM_MTA 208 )
Task information ( SBTM_OPS_MSG 007 )
Component information ( SBTM_OPS_MSG 023 )
Operational information ( SBTM_OPS_MSG 024 )
CCMS initialization: ( SBTM_OPS_MSG 080 )
RFC destination '&1' for BTM frontend notification is missing ( SBTM_TAF 150 )
Search for &1 yields multiple results. Use F4 to select an entry. ( SBTM_TYP 050 )
Task type '&1' not found ( SBTM_TYP 051 )
No task type name matches the search pattern '&1' ( SBTM_TYP 052 )
Deletion of task type is not possible ( SBTM_TYP 092 )
Responsibility type '&1' does not exist ( SBTM_TYP 100 )
Task type '&1' for 'Execution Failure' reaction is of wrong usage type ( SBTM_TYP 101 )
Errors in task type used for 'Execution Failure' reaction ( SBTM_TYP 102 )
Design: Activation of task type '&1' failed ( SBTM_TYP 114 )
Configuration: Activation of task type '&1' failed ( SBTM_TYP 115 )
Access context '&1' does not exist ( SBTM_TYP 117 )
Task type '&1' is locked against editing ( SBTM_TYP 120 )
Responsible organization will not be considered ( SBTM_TYP 158 )
Using person and organization responsibility in parallel is not supported ( SBTM_TYP 174 )
Transport of task type '&1' in request &2 resulted in errors ( SBTM_TYP 178 )
Activation failed. Run BTM auto customizing in relevant client(s) ( SBTM_TYP 189 )
Transport of task type &1 in request &2 resulted in configuration errors ( SBTM_TYP 197 )
Configuration and cache is not updated for task type &1 ( SBTM_TYP 198 )
Task type '&1' cannot be locally configured ( SBTM_TYP 208 )
Point where call originated cannot be displayed for the selected object ( SC 001 )
Dynamic calls cannot be displayed ( SC 002 )
Function can only be used with external modules ( SC 003 )
Subroutine &1 in program &2 either does not exist or is not used ( SC 004 )
Dynpro &1 in program &2 either does not exist or is not used ( SC 007 )
No packages exist for the selected group ( SC 030 )
Choose at least one entry ( SC 031 )
Do not choose more than &1 entries ( SC 032 )
Difference display switched off ( SC 033 )
All tables are switched off ( SC 036 )
Ranking &1 not defined ( SC 040 )
rc = &1, subrc = &2 ( SC 043 )
Ranking &1 saved without checking ( SC 045 )
You do not have authorization to change ranking &1 ( SC 046 )
Ranking &1 has been deleted. ( SC 047 )
Cursor is not in formula field ( SC 050 )
Calculation formula is empty ( SC 051 )
Metric: &1(&2) ( SC 052 )
Position the cursor on an object ( SC 053 )
Function: &1 = &2 ( SC 054 )
Unknown object: &1 ( SC 055 )
Choose a node in the hierarchy ( SC 057 )
Position the cursor on a release entry ( SC 058 )
Unable to find any further calls ( SC 070 )
Unable to display the component hierarchy ( SC 080 )
Application package name &1 has already been assigned to a package ( SC 082 )
Unable to find the selected metrics in system &1 ( SC 089 )
You did not request any metrics ( SC 090 )
Object name is incomplete ( SC 092 )
Select one or more columns ( SC 095 )
The application package & contains all customer packages ( SC 102 )
The application package & contains all local packages ( SC 103 )
The application package & reserved for internal use ( SC 104 )
Function module & contains syntax errors ( SC 125 )
Pushbuttons are longer than 79 characters ( SC 140 )
Menu bar options are longer than 67 characters ( SC 141 )
Position & of pushbuttons filled more than once ( SC 145 )
Status & deleted ( SC 150 )
Function keys & deleted ( SC 155 )
Function set & deleted ( SC 158 )
Menu & does not exist ( SC 160 )
Function keys & do not exist ( SC 170 )
Pushbuttons & of the F keys & do not exist ( SC 180 )
Cannot restart (no restart information on INDX) ( SC 200 )
Error appending to table RSDDSRCH ( SC 201 )
No definition exists for program & ( SC 240 )
Program & already has a user interface ( SC 241 )
Program & is already being edited ( SC 250 )
Function cannot be processed ( SC 252 )
Function cannot be processed ( SC 253 )
No extended texts found ( SC 260 )
One or more configuration objects in request are not active ( SC2M 100 )
Table &1 activation error ( SC2PT 008 )
Too many long string fields in language-independent node table ( SC2PT 049 )
Too many long string fields in language-dependent node table ( SC2PT 050 )
Parameter & is already used in field &. Specify a different name ( SC2_IDE 016 )
The data structure contain fields with name length > 16 characters ( SC2_IDE 024 )
Caution: Changing text field selection can cause loss of data ( SC2_IDE 033 )
Caution: Changing time-dependence can cause loss of data ( SC2_IDE 034 )
Transaction currently locked ( SC 500 )
Table SCALT_CONV does not contain suitable conversion date ( SCAL_CONV 001 )
Table SCALT_CONV provides an inconsistent conversion date ( SCAL_CONV 002 )
Date to be converted is inconsistent ( SCAL_CONV 003 )
Enter a valid calendar type ( SCAL_CONV 054 )
This calendar type has no month table ( SCAL_CONV 055 )
Not authorized to access object_provider &1 ( SCA_DS 000 )
Connection test for RFC destination &1 failed (see longtext) ( SCA_DS 059 )
System failure for RFC destination &1 ( SCA_DS 063 )
Communication failure for RFC destination &1 ( SCA_DS 064 )
Enter RFC destination or SAP system ( SCA_DS 307 )
Enter RFC destination if you want to schedule check runs for &1 in &2 ( SCA_DS 308 )
Business object &1 can be detached only in an on-premise environment. ( SCBO_MODEL 049 )
Delete all check aspect values first ( SCC_WB_TOOLS 014 )
Some required check aspect values do not exist ( SCC_WB_TOOLS 032 )
Invalid default value: Aspect value & does not exist ( SCC_WB_TOOLS 035 )
Service class & cannot be instantiated ( SCC_WB_TOOLS 042 )
Implementing class & cannot be instantiated ( SCC_WB_TOOLS 043 )
A value has been incorrectly entered for check aspect & ( SCC_WB_TOOLS 046 )
Referenced Objects in CDS ( SCDS_ATC_CHECKS 000 )
Element &2 for &1 not found ( SCDS_ATC_CHECKS 001 )
Key element &2 for &1 not found ( SCDS_ATC_CHECKS 002 )
Parameter &2 for &1 not found ( SCDS_ATC_CHECKS 003 )
Association &2 for &1 not found ( SCDS_ATC_CHECKS 004 )
Entity &2 for &1 not found ( SCDS_ATC_CHECKS 005 )
Annotation Check for Data Definitions ( SCDS_ATC_DDLS_ANNO 000 )
Annotation &1 does not exist ( SCDS_ATC_DDLS_ANNO 001 )
Annotation &1 is used at a wrong position ( SCDS_ATC_DDLS_ANNO 002 )
Enumeration value &2 for annotation &1 does not exist ( SCDS_ATC_DDLS_ANNO 003 )
Annotations value &1 does not match the annotation type &2 ( SCDS_ATC_DDLS_ANNO 004 )
Check for Client Session Variable Dependency ( SCDS_ATC_SESNVAR_DEP 000 )
"#SESSION_VARIABLE" specified but view is not session-variable-dependent ( SCDS_ATC_SESNVAR_DEP 001 )
Check Where Clause Generation When Using #SESSION_VARIABLE ClientHandling ( SCDS_ATC_SESNVAR_MIG 000 )
CDS Remote Syntax Check ( SCDS_ATC_SYNTREM 000 )
Data definition contains syntax errors ( SCDS_ATC_SYNTREM 001 )
Wrong key order. All keys must be defined before other non-key elements ( SCDS_ATC_SYNTREM 002 )
The system landscape is not yet maintained ( SCDT_DIST 001 )
You are not authorized to install distribution ( SCDT_DIST 003 )
Specify the source system ( SCDT_DIST 004 )
The connection to system & cannot be made ( SCDT_DIST 005 )
You are not authorized to distribute into system & ( SCDT_DIST 006 )
Transport requests cannot be assigned in the target system &1 ( SCDT_DIST 007 )
Distribution successful for target system & ( SCDT_DIST 010 )
Object: &1 put in distribution ( SCDT_DIST 011 )
Object &1 is already distributed by another project/synch. group ( SCDT_DIST 015 )
Distribution is active or cancelled ( SCDT_DIST 016 )
The project - synchronization group combination is not active ( SCDT_DIST 021 )
Internal error: Object data of &1 are inconsistent ( SCDT_DIST 027 )
The RFC destination for &1 is not maintained in the system landscape ( SCDT_DIST 030 )
Source system release is too old. Distribution is only manual or initial ( SCDT_DIST 046 )
The transport is empty or the task not yet released. -> Text ( SCDT_DIST 047 )
BC Set activation in system &1 ended with warnings ( SCDT_DIST 052 )
BC Set activation in system &1 ended with errors ( SCDT_DIST 053 )
BC Set activation in system &1 cancelled ( SCDT_DIST 054 )
The distribution method is already defined differently for this project ( SCDT_DIST 055 )
Missing RFC destination for system &1 client &2, service &3 ( SCDT_DIST 057 )
A different central system is defined for this project in the source ( SCDT_DIST 063 )
- Subobject &1 of &2 put in distribution ( SCDT_DIST 064 )
Only time-dep. distribution is possible for source releases before 4.6C ( SCDT_DIST 065 )
Synchronization object: &1 put in distribution ( SCDT_DIST 066 )
Addresses not supported, field &1 in &2 remains empty ( SCDT_DIST 072 )
Key field &1 contains an address number, &2 is not distributed ( SCDT_DIST 073 )
... Target entries (INS:&1; UPD:&2; DEL:&3; TOT:&4) ( SCDT_DIST 077 )
No data found which must be distributed into the target system ( SCDT_DIST 079 )
Table &1 of &2 Language Field Conversion Error ( SCDT_DIST 081 )
User &1 is Blocking the Distribution of &2 ( SCDT_DIST 085 )
Conversion error in fields of table &1 from &2 ( SCDT_DIST 086 )
Conversion error in key fields of table &1 from &2 ( SCDT_DIST 087 )
Profile &1 not in &2. Import the current ST-PI Add-On ( SCDT_DIST 096 )
Password was cut off after eight characters (user &1; system &2) ( SCDT_DIST 097 )
You are not authorized to delete the logs ( SCDT_DIST 104 )
There is no BC Set for the log which you have chosen ( SCDT_DIST 106 )
Source client or system not found ( SCDT_DIST 108 )
Log cannot be deleted ( SCDT_DIST 110 )
RFC connection &1 cannot be made (&2&3) ( SCDT_DIST 113 )
RFC destination &1 uses no dialog user in target system &2 ( SCDT_DIST 115 )
RFC destination &1 sends a logon screen ( SCDT_DIST 116 )
No system found for project &1 ( SCDT_LIS_IF 003 )
SLD communication error: & ( SCDT_LIS_IF 004 )
Function group &1 cannot be called in RFC system &2 ( SCDT_LIS_IF 010 )
The SLD server connection is inactive ( SCDT_LIS_IF 011 )
Log. component &1: No log. system is assigned to system role &2 ( SCDT_LIS_IF 032 )
Log. component &1: Log. system &3 has no RFC destination ( SCDT_LIS_IF 033 )
Log. component &1: Product &4 is not in log. system &3 ( SCDT_LIS_IF 034 )
Log. system &3 has a different product version from logical component &1 ( SCDT_LIS_IF 035 )
Log. component &1: Dependency on product instance &2 ( SCDT_LIS_IF 036 )
&1: Log. system &2 has no RFC destination ( SCDT_LIS_IF 038 )
This synchronization object could not be saved ( SCDT_MAP 007 )
No F4 help available ( SCDT_MAP 018 )
The table(s) cannot be assigned 1:1 ( SCDT_MAP 024 )
Incomplete data cannot be saved ( SCDT_MAP 026 )
Interval cannot be deleted (no gaps allowed) ( SCDT_MAP 027 )
Highest Release value is too high ( SCDT_MAP 030 )
Correct the Release limits ( SCDT_MAP 031 )
No RFC destination required for component &1 ( SCDT_MAP 034 )
No source IMG activity specified ( SCDT_MAP 037 )
Object &1 does not exist in source system ( SCDT_MAP 041 )
There is no possible entries help for IMG activities for tables ( SCDT_MAP 047 )
Synchronization object &1 error ( SCDT_MAP 048 )
Edit the mapping information of synchronization object &1 ( SCDT_MAP 050 )
IT_OBJECT is empty ( SCDT_MPNG 002 )
No entry in table &2 for object &1 ( SCDT_MPNG 003 )
No entry for the EQ object: &1 in IT_MAPFLD ( SCDT_MPNG 004 )
RFC parameter release inconsistency for object &1 ( SCDT_MPNG 005 )
Release inconsistency for object &1. See long text ( SCDT_MPNG 006 )
Incorrect entries in the table IT_MAPFLD for object &1 ( SCDT_MPNG 007 )
No entry in &2 for the object &1 ( SCDT_MPNG 008 )
The entry in the IT_MAPFLD is superfluous for object &1 ( SCDT_MPNG 009 )
Some fields for object &1 only exist in the table &4 ( SCDT_MPNG 010 )
Some fields of object &1 can only be converted by &4 ( SCDT_MPNG 011 )
Some fields of object &1 cannot be converted ( SCDT_MPNG 012 )
Some fields of object &1 are not identical, but they are convertible ( SCDT_MPNG 013 )
Error - obj: &1, some fields have NTAB comparison errors ( SCDT_MPNG 014 )
&2, Object: &1 ( SCDT_MPNG 015 )
&2, Object: &1 ( SCDT_MPNG 016 )
Field &2 of object &1 is in &3 ( SCDT_MPNG 017 )
Field &2 of object &1 can only be converted by &3 ( SCDT_MPNG 018 )
Field &2 of object &1 is not convertible ( SCDT_MPNG 019 )
Field &2 of object &1 is not identical, but convertible ( SCDT_MPNG 020 )
Field &2 of object &1 has NTAB comparison errors ( SCDT_MPNG 021 )
Entry &1 in table &2 is invalid ( SCDT_MPNG 022 )
Tables could not be extracted from 'S' object: &1 ( SCDT_MPNG 023 )
&2 fields correctly assigned in object &1 ( SCDT_MPNG 024 )
Object &1 may not be BC Set-compatible ( SCDT_MPNG 025 )
The BC Set-compatibility of obj. &1 could not be checked ( SCDT_MPNG 026 )
Internal error: IT_OBJECT is empty ( SCDT_MPNG1 002 )
Internal error: No entry in &2 for the object: &1 ( SCDT_MPNG1 003 )
Internal error: RFC parameter release inconsistency for object &1 ( SCDT_MPNG1 005 )
Internal error: Release inconsistency for object &1 -> long text ( SCDT_MPNG1 006 )
Internal error: Incorrect entries in IT_MAPFLD for object &1 ( SCDT_MPNG1 007 )
Internal error: No entry in &2 for object &1 ( SCDT_MPNG1 008 )
Internal warning: The entry in IT_MAPFLD is superfluous for object &1 ( SCDT_MPNG1 009 )
Object: &1, some fields only exist in &4 ( SCDT_MPNG1 010 )
Source table &1: Possible data loss in redistribution ( SCDT_MPNG1 011 )
Object &1, some fields cannot be converted ( SCDT_MPNG1 012 )
Note - object: &1, some fields can be converted ( SCDT_MPNG1 013 )
Object &1, some fields have structure comparison errors ( SCDT_MPNG1 014 )
&2, object: &1 ( SCDT_MPNG1 015 )
&2, object: &1 ( SCDT_MPNG1 016 )
Object &1: Field &2 only exists in &3 ( SCDT_MPNG1 017 )
Source table &1, field &2: Possible data loss in redistribution ( SCDT_MPNG1 018 )
Source table &1, field &2: Assignment not possible ( SCDT_MPNG1 019 )
Note - object: &1; the field &2 can be converted ( SCDT_MPNG1 020 )
Internal warning: Excess entry &1 in table &2 ( SCDT_MPNG1 022 )
The tables could not be extracted from the 'S' object: &1 ( SCDT_MPNG1 023 )
Object: &1, &2 fields are assigned correctly ( SCDT_MPNG1 024 )
Object: &1 may not be BC Set-compatible ( SCDT_MPNG1 025 )
The BC Set-compatibility of object &1 could not be checked ( SCDT_MPNG1 026 )
Source table &1, field &2: Possible data loss in distribution ( SCDT_MPNG1 027 )
You cannot insert &1 (recursion) ( SCDT_SCENARIOS 001 )
You have no authorization for the synchronization group editor ( SCDT_SCENARIOS 005 )
No authorization to create or change synchronization groups ( SCDT_SCENARIOS 006 )
You have no authorization to load object lists ( SCDT_SCENARIOS 007 )
Enter a name in customer namespace ( SCDT_SCENARIOS 014 )
You cannot change the synchronization group &1 in SAP namenspace ( SCDT_SCENARIOS 023 )
Missing RFC destination. Change the system landscape ( SCDT_SCENARIOS 026 )
You are creating a cross-component synchronization group ( SCDT_SCENARIOS 035 )
No access to IMG with RFC destination &1: &2 &3 ( SCDT_SCENARIOS 043 )
View cluster objects copied from piece list ( SCDT_SCENARIOS 052 )
The object descriptions are only available after saving ( SCDT_SCENARIOS 053 )
Customizing object has been replaced by synchronization object ( SCDT_SCENARIOS 058 )
Objects in subgroups cannot be deleted ( SCDT_SCENARIOS 076 )
Choose reference systems for synchronization group &1 ( SCDT_SCENARIOS 082 )
No reference system for synchronization group &1 ( SCDT_SCENARIOS 083 )
No target release. Choose reference systems ( SCDT_SCENARIOS 084 )
Synchronization group &1 is used in Customizing Distribution ( SCDT_SCENARIOS 090 )
Authorization insufficient for all desired systems ( SCDT_SCOUT_ENTRY 003 )
No object lists ( SCDT_SCOUT_ENTRY 006 )
System &1 is not of type SAP R/3 ( SCDT_SCOUT_ENTRY 008 )
The target system has no RFC destination ( SCDT_SCOUT_ENTRY 012 )
System landscape information access error ( SCDT_SCOUT_ENTRY 013 )
No RFC destination for system &1 ( SCDT_SCOUT_ENTRY 014 )
System &1 is not assigned to a system role ( SCDT_SCOUT_ENTRY 015 )
No authorization to use system &1 as comparison system ( SCDT_SCOUT_ENTRY 016 )
No authorization to download object lists ( SCDT_SCOUT_ENTRY 017 )
No RFC destination for system &1 ( SCDT_SCOUT_ENTRY 018 )
&1 of &2 comparisons deleted ( SCDT_SCOUT_ENTRY 026 )
No authorization for System &1, Client &2 ( SCDT_SCOUT_ENTRY 028 )
There is no RFC destination for System &1, Client &2 ( SCDT_SCOUT_ENTRY 032 )
No objects for System &1, Client &2. System not compared ( SCDT_SCOUT_ENTRY 034 )
Distribution is not actived for project &1 ( SCDT_SCOUT_ENTRY 036 )
Comparison display error ( SCDT_SCOUT_ENTRY 896 )
Comparison error ( SCDT_SCOUT_ENTRY 897 )
Internal error: &1 &2 &3 &4 ( SCDT_SCOUT_ENTRY 899 )
Error connecting to RFC destination &1: &2 &3 ( SCDT_SCOUT_LOG 005 )
No system found for component &3 and role '&2' in project &1 ( SCDT_SYS 504 )
You are not authorized to change the logical components ( SCDT_SYS 505 )
Component &1 is not an ABAP component (navigation not possible) ( SCDT_SYS 506 )
No system found for component &1, role '&3' in solution '&2' ( SCDT_SYS 507 )
No system for component &2 in solution '&1' ( SCDT_SYS 508 )
&1 indicates no available logical system ( SCDT_SYS 606 )
Save problems: System landscape could not be saved ( SCDT_SYS 609 )
Logical system &1 is defined more than once ( SCDT_SYS 626 )
No authorization to change the system landscape for project &1 ( SCDT_SYS 636 )
You are not authorized to change the instances ( SCDT_SYS 637 )
No authorization to display the system landscape for project &1 ( SCDT_SYS 638 )
You are not authorized to display the instances ( SCDT_SYS 639 )
You are not authorized to change the system landscape ( SCDT_SYS 640 )
You are not authorized display the system landscape ( SCDT_SYS 641 )
Component &1 can only be the source component in a comparison ( SCDT_XSM 103 )
&1 is only used as source component. No comparison has been made ( SCDT_XSM 109 )
&1 is only used as source component. No comparison can be made ( SCDT_XSM 110 )
&1 is used as a source component. No exclusion can be defined ( SCDT_XSM 111 )
You are not authorized to compare in target client (S_TABU_CLI) ( SCDT_XSM 112 )
You are not authorized to compare in source client (S_TABU_CLI) ( SCDT_XSM 113 )
You are not authorized to compare in target client (S_TABU_RFC) ( SCDT_XSM 114 )
You are not authorized to compare in source client (S_TABU_RFC) ( SCDT_XSM 115 )
Target client is locked against external access (T000) ( SCDT_XSM 116 )
Source client is locked against external access (T000) ( SCDT_XSM 117 )
Cannot call in remote system: &1 &2 ( SCDT_XSM 122 )
No RFC connection for system &1 client &2 ( SCDT_XSM 123 )
Comparison data inconsistent ( SCDT_XSM 124 )
It may not be possible to change the IMG ( SCDT_XSM 129 )
No texts for domain &1 in language &2 ( SCERT_EXCEPTION 111 )
Forbidden COMMIT WORK in handling after save ( SCERT_EXCEPTION 206 )
Veto: Exit: &1; Application component; &2 ( SCERT_EXCEPTION 208 )
Exception Raised: Exit: &1; Application Component; &2 ( SCERT_EXCEPTION 209 )
Customizing object &1 can not be maintained with this tool ( SCERT_EXCEPTION 253 )
After Commit Exit '&1'ended incorrectly ( SCERT_LOG 156 )
No registry entry for schema node &1 ( SCERT_LOG 176 )
Element still in use and cannot be deleted ( SCI 001 )
Caution: DEFAULT check variant has a special purpose ( SCI 005 )
Check variant: Attributes are not complete (&1) ( SCI 011 )
The object set could not be saved ( SCI 023 )
Choose an Object ( SCI 026 )
The object set contains too many objects ( SCI 028 )
Inspection could not be copied due to unknown &1 ( SCI 034 )
Inspection could not be copied due to missing &1 ( SCI 035 )
Display: Object set at time of execution of inspection ( SCI 036 )
Display: Check variant at time of execution of inspection ( SCI 037 )
Due to changed format, the check variant can no longer be read ( SCI 039 )
Invalid Object Set ( SCI 042 )
The object was saved, but it does not contain any object ( SCI 045 )
Your own DEFAULT check variant was successfully deleted ( SCI 048 )
The check variant does not exist (see long text) ( SCI 054 )
This is an SAP object that cannot be checked ( SCI 058 )
Selection was not activated. Refer to long text ( SCI 077 )
Object set &1, version &2 can no longer be displayed ( SCI 078 )
The inspection was only partially completed ( SCI 085 )
Result has too many records (more than &1) and will be displayed in parts ( SCI 088 )
Result tree is too big (> &1 entries) and is only displayed in parts ( SCI 089 )
Inspection cannot be carried out due to invalid check variant ( SCI 095 )
Inspection cannot be carried out due to invalid check variant ( SCI 096 )
Inspection cannot be carried out due to invalid check variant ( SCI 097 )
TEST ( SCI 099 )
Error editing object &1 &2. Info: &3 ( SCI 100 )
Check variant &1 cannot be included in a transport request ( SCI 105 )
New or changed global check variants were imported ( SCI 115 )
No new check variants found ( SCI 116 )
Object set &1, version &2, user &3 included in other set of objects ( SCI 123 )
Limit for maximum number of versions was reached ( SCI 132 )
Limit for maximum number of global inspections reached ( SCI 133 )
Limit for maximum number of inspections reached for user &1 ( SCI 134 )
Non-assigned include. Check only possible for main program ( SCI 143 )
Invalid category class &1 in check variant ( SCI 144 )
Invalid class name &1 in check variant ( SCI 145 )
You are not authorized to delete this exception ( SCI 155 )
Requester or approver of exception not valid ( SCI 159 )
Exception already requested for this message in another inspection ( SCI 167 )
Validity of exception cannot be limited ( SCI 168 )
Inspection &1 / &2 cannot be deleted, contains exception request ( SCI 169 )
A global object set cannot contain a local object set ( SCI 182 )
Check category &2 for checking &1 is not yet active ( SCI 225 )
Check category &1 is still in use (contains check &2) ( SCI 226 )
Method '&1' is not implemented ( SCI 301 )
This information about proxy check &1 requires an RFC connection ( SCI 533 )
RFC destination of the reference check system does not exist ( SCI 541 )
Reference check variant does not exist in check system ( SCI 542 )
RFC destination is not specified ( SCI 544 )
Reference check system does not contain the required functions ( SCI 546 )
Action not authorized (see long text) ( SCIDM2 001 )
System '&1' is unknown ( SCIDM2 003 )
Action not authorized (see long text) ( SCIDM2 019 )
Business system '&1' cannot be deleted ( SCIDM2 020 )
ID type and system are in the type group '&2' (client &1) ( SCIDM2 207 )
There are still ID mappings for the ID type and the Business System ( SCIDM2 209 )
Type group '&1' for Integration Server '&2' still contains assignments ( SCIDM2 213 )
No authorization to assign ID type and Business System ( SCIDM2 214 )
No RFC destination for Business System '&1' ( SCIDM2 302 )
&1 row(s) inserted; &2 ID(s) had already been assigned ( SCIDM2 309 )
IDs cannot be accessed in the source system ( SCIDM2 337 )
No authorization to edit ID mappings (see long text) ( SCIDM2 350 )
Exporting ID mappings for: ( SCIDM2 448 )
ID mapping export error. Action cancelled ( SCIDM2 452 )
Initializing. Export not possible ( SCIDM2 453 )
No RFC write destination for system '&1' ( SCIDM2 454 )
Internal Integration Server error ( SCIDM2 459 )
ID mapping definition in the integration is inconsistent ( SCIDM2 460 )
System '&1' is not an Integration Server ( SCIDM2 465 )
Start deletion of ID mappings on the Integration Server for: ( SCIDM2 480 )
Deletion error. Action cancelled ( SCIDM2 491 )
No ID types assigned to the type group. Action cancelled ( SCIDM2 492 )
Customizing Distribution conflict. Assignment not possible ( SCIDM2 520 )
Distribution conflict: Project '&1', Synchronization group '&2' ( SCIDM2 521 )
Distribution conflict: Source object '&1' gets ID of type '&3' ( SCIDM2 522 )
Distribution conflict: Target object '&1' ( SCIDM2 523 )
Distribution conflict: Target object '&1' gets ID of type '&3' ( SCIDM2 524 )
Distribution conflict: Source object '&1' ( SCIDM2 525 )
ID type '&2', system '&3' (in target type group '&1') are assigned to IDs ( SCIDM2 716 )
Inconsistencies; replication is not performed ( SCIDM2 753 )
You are not authorized for this action (see long text) ( SCIDM_EDIT_ID_TYPE 021 )
ID type '&1': No key fields in the text table ( SCIDM_EDIT_ID_TYPE 056 )
ID type '&1', field '&2': Data type is not supported ( SCIDM_EDIT_ID_TYPE 057 )
ID type is used in type group '&3' ('&2'). You cannot delete ( SCIDM_EDIT_ID_TYPE 076 )
Message ( SCI_TEST 000 )
Message &1 ( SCI_TEST 001 )
Message &1 &2 ( SCI_TEST 002 )
Message &1 &2 &3 &4 ( SCI_TEST 004 )
Connection to server failed (ICM_HTTP_CONNECTION_FAILED) ( SCLNT_HTTP 400 )
Connection to server broken (ICM_HTTP_CONNECTION_BROKEN) ( SCLNT_HTTP 401 )
Timeout error (ICM_HTTP_TIMEOUT) ( SCLNT_HTTP 402 )
Service not available (ICM_HTTP_SERVICE_UNAVAILABLE) ( SCLNT_HTTP 403 )
ICM memory request failed (ICM_HTTP_NO_MORE_MEMORY) ( SCLNT_HTTP 404 )
Internal ICM error (ICM_HTTP_INTERNAL_ERROR) ( SCLNT_HTTP 405 )
ICM authorization error (ICM_HTTP_NO_PERMISSION) ( SCLNT_HTTP 406 )
SSL error (ICM_HTTP_SSL_ERROR) ( SCLNT_HTTP 407 )
SSL proxy error (ICM_HTTP_SSL_PROXY_ERROR) ( SCLNT_HTTP 408 )
Logon failed (ICM_HTTP_UNAUTHORIZED) ( SCLNT_HTTP 410 )
Connection refused by server (ICM_HTTP_CONNECTION_REFUSED) ( SCLNT_HTTP 411 )
Connection refused by proxy server (ICM_HTTP_PROXY_CONN_REFUSED) ( SCLNT_HTTP 412 )
Unknown proxy host name (ICM_HTTP_PROXY_HOST_UNKNOWN) ( SCLNT_HTTP 413 )
SSL PSE file not found (ICM_HTTP_SSL_CRED_NOT_FOUND) ( SCLNT_HTTP 414 )
Invalid host name in SSL server certificate (ICM_HTTP_SSL_CERT_MISMATCH) ( SCLNT_HTTP 415 )
Logon at proxy failed (ICM_HTTP_PROXY_UNAUTHORIZED) ( SCLNT_HTTP 416 )
Unknown host name (ICM_HTTP_HOST_UNKNOWN) ( SCLNT_HTTP 417 )
No suitable ICM service active (ICM_HTTP_NO_ICM_SERVICE) ( SCLNT_HTTP 418 )
SSL is not initialized (ICM_HTTP_SSL_NOT_INITIALIZED) ( SCLNT_HTTP 419 )
SSL Server Certificate has expired (ICM_HTTP_SSL_PEER_CERT_EXPIRED) ( SCLNT_HTTP 420 )
SSL certificate not trusted (ICM_HTTP_SSL_PEER_CERT_UNTRUSTED) ( SCLNT_HTTP 421 )
Internal error in method &1 for &2 ( SCMG_CASE 001 )
Due to its status, &1 is display only ( SCMG_CASE 005 )
Error when checking attributes ( SCMG_CASE 006 )
&1 is locked by user &2 and is display only ( SCMG_CASE 007 )
Error when calling BAdI ( SCMG_CASE 008 )
You are not authorized to perform this action ( SCMG_CASE 009 )
No valid &1s exist ( SCMG_CASE 010 )
&1 &2 &3 &4 ( SCMG_CASE 012 )
Error when calling case component ( SCMG_CASE 015 )
&1 is not assigned to an object ( SCMG_CASE 016 )
No text types exist for this case type, check the text profile ( SCMG_CASE 055 )
Number range interval &1 from &2 is almost used up ( SCMG_CASE 301 )
First choose a Records Management System ID ( SCMG_CUSTOMIZING 000 )
Error in Records Management Framework ( SCMG_CUSTOMIZING 001 )
No element types for & found in RMS & ( SCMG_CUSTOMIZING 002 )
No template relationship defined for service provider & ( SCMG_CUSTOMIZING 003 )
Profile &1 not defined for case search ( SCMG_CUSTOMIZING 106 )
Field &1 entered twice in profile for case search ( SCMG_CUSTOMIZING 107 )
&1-&2 is a key field and cannot be excluded ( SCMP_EXCP 009 )
No authorization to edit or activate exceptions ( SCMP_EXCP 016 )
Unit &2 is not a valid unit of measure for the material ( SCM_MD_R3_PI 010 )
Unit &1 does not correspond to base unit of measure of material ( SCM_MD_R3_PI 011 )
Category of PUoM for &1 must correspond to cat. of other UoM of same dim. ( SCM_MD_R3_PI 031 )
&1 is not as valid namespace prefix for a code ( SCODELIST_REGISTRY 000 )
Generated proxy is not active or not of type 'CODE' ( SCODELIST_REGISTRY 003 )
Domain fixed values have no context ( SCODELIST_REGISTRY 004 )
The name of the context structure is no longer up-to-date ( SCODELIST_REGISTRY 005 )
Code type with non-character context field ( SCODELIST_REGISTRY 006 )
Code type with non-character context field ( SCODELIST_REGISTRY 007 )
Context field cannot be assigned without context structure ( SCODELIST_REGISTRY 008 )
No context structure is assigned to the code type definition ( SCODELIST_REGISTRY 009 )
Registry entry &1 already exists ( SCODELIST_REGISTRY 010 )
Names of schema node &1 and IMG table &2 do not match ( SCODELIST_REGISTRY 011 )
Code Type &1: Foreign key definition problem (see long text) ( SCODELIST_REGISTRY 113 )
A domain or table and field name must be maintained ( SCODELIST_REGISTRY 118 )
Code type &1: Context &2 is not a generated proxy ( SCODELIST_REGISTRY 122 )
Code Type &1: Invalid Text Table Specified ( SCODELIST_REGISTRY 123 )
Context structure &1 in the registry is not global type &2 ( SCODELIST_REGISTRY 206 )
Registration only in transaction SM30 (view V_SCODE_REGISTRY) ( SCODELIST_REGISTRY 300 )
No authorization for mapping backend users to USREXTID ( SCOL_API 206 )
BO & is a generated proxy object (change using Transaction SPROXY) ( SCOOL 256 )
TREX query has changed ( SCOOL 403 )
TREX query and search definition are inconsistent ( SCOOL 404 )
Could not test aspects ( SCOOL 601 )
Number of rows different from the cardinality for the action ( SCOOL 609 )
No authorization to display Data Trace for current user ( SCOOL_MSG 050 )
No authorization to maintain Data Trace for current user ( SCOOL_MSG 051 )
No authorization to display Data Trace for other user ( SCOOL_MSG 053 )
No authorization to maintain Data Trace for other user ( SCOOL_MSG 054 )
No authorization to display Performance Trace for current user ( SCOOL_MSG 056 )
No authorization to maintain Performance Trace for current user ( SCOOL_MSG 057 )
No authorization to display Performance Trace for other user ( SCOOL_MSG 059 )
No authorization to maintain Performance Trace for other user ( SCOOL_MSG 060 )
No authorization to lock or unlock Data Trace ( SCOOL_MSG 062 )
Save Owner already registered ( SCOOL_SERVER 014 )
ConfChk: PARENT_NODE_ID not filled in BO-Name '&1' BO-Node '&2', ID='&3' ( SCOOL_SERVER 173 )
The service provider implementation raised an exception. ( SCOOL_SERVER 193 )
RootNodeId (Image &3) not found for change notif. on node &2, node id &1 ( SCOOL_SERVER 217 )
Core Service ConvertKeys not implemented ( SCOOL_SERVER 218 )
Short text &1 ( SCOOL_SERVER 876 )
Short text &1 ( SCOOL_SERVER 877 )
Enter a BC Set name ( SCPR 001 )
Specify a valid version ( SCPR 002 )
Invalid BC Set type. See long text ( SCPR 003 )
Attribute write error. See long text ( SCPR 006 )
Change document write error. See long text ( SCPR 007 )
BC Set short text write error. See long text ( SCPR 008 )
Values write error. See long text ( SCPR 010 )
Value delete error. See long text ( SCPR 011 )
BC Set does not exist; choose an existing BC Set ( SCPR 012 )
No BC Set found for selection criteria ( SCPR 013 )
Attributes cannot be deleted. They still have short texts ( SCPR 014 )
BC Set attribute delete error. See long text ( SCPR 015 )
Attributes cannot be deleted, They still have data ( SCPR 016 )
BC Set short text delete error. See long text ( SCPR 017 )
Specify a customizing object ( SCPR 020 )
The customizing object is not consistent ( SCPR 021 )
Choose a different name. BC Set & already exists ( SCPR 022 )
Missing customizing object parameter. See long text ( SCPR 023 )
Cust. object does not exist. See long text ( SCPR 024 )
Specify a table name ( SCPR 025 )
Table & is too wide. It cannot be processed ( SCPR 026 )
Error reading view & header data ( SCPR 027 )
The table/view & has no generated maintenance dialog ( SCPR 028 )
Table read error. See long text ( SCPR 029 )
Specify a short text for the BC Set ( SCPR 032 )
Specify a BC Set short text ( SCPR 034 )
Define the BC Set validity range ( SCPR 041 )
Customizing object '&1' (type '&2') is not supported ( SCPR 043 )
Enter company name ( SCPR 044 )
Field &2 cannot be put in the BC Set for table/view &1 ( SCPR 045 )
Adjustment required for BC Set & ( SCPR 048 )
Adjust the BC Set ( SCPR 049 )
Attributes cannot be deleted because sub-BC Sets exist ( SCPR 051 )
BC Set cannot be deleted. Adjust it first ( SCPR 053 )
Transport layer error ( SCPR 054 )
No BC Set exists for this customizing object ( SCPR 055 )
No BC Set found ( SCPR 056 )
Select a data record. See long text ( SCPR 059 )
Your data selection contains key conflicts. See long text ( SCPR 063 )
BC Sets cannot be activated in production systems; see the long text ( SCPR 065 )
You have no Favorites. & BC Sets are displayed ( SCPR 066 )
Field &1 is not defined in table &2 ( SCPR 068 )
BC Set & does not exist ( SCPR 072 )
Transport request specified does not exist ( SCPR 075 )
Not authzorized to read transport request ( SCPR 076 )
Enter a table name ( SCPR 078 )
Table & is too wide (maximum is 1024 characters) ( SCPR 080 )
BC Set & is not valid in this release ( SCPR 081 )
Database error in table &1. See long text ( SCPR 082 )
No data records found for table/view &1 with key '&2' ( SCPR 083 )
Table key not correct for this table definition ( SCPR 084 )
Activate SAP BC Sets only ( SCPR 085 )
Table & not suitable for inclusion in a BC Set ( SCPR 086 )
Position the cursor on an activity ( SCPR 087 )
No default data available for table/view; see long text ( SCPR 088 )
Data record read error; see long text ( SCPR 089 )
Inconsistency in view data structure: & ( SCPR 090 )
Enter a table type (V = view, S = table) ( SCPR 091 )
No BC Set short text ( SCPR 092 )
BC Set &1 has key conflicts; see long text ( SCPR 095 )
BC Set data does not match field ( SCPR 101 )
No customizing object found. Check the data ( SCPR 102 )
No data found for writing activation links for object &1 ( SCPR 116 )
Activation link deletion error ( SCPR 117 )
No unique assignment from selection list possible ( SCPR 119 )
Table/view & not found ( SCPR 120 )
Transport request &2 is from client &1. Create the BC Set there ( SCPR 124 )
No assigned BC Set found ( SCPR 126 )
BC Set &1 contains invalid characters ( SCPR 127 )
Table & does not exist. Check the name ( SCPR 128 )
Choose only customizing tables ( SCPR 129 )
The field & value does not satisfy the view selection conditions ( SCPR 131 )
BC Set & read error; see long text ( SCPR 132 )
Error opening file &1; see long text ( SCPR 136 )
Error writing to file &1; see long text ( SCPR 137 )
Error writing to file &1; see long text ( SCPR 138 )
Error reading file &1; see long text ( SCPR 141 )
Invalid file type; see long text ( SCPR 142 )
File &1 upload error; see long text ( SCPR 144 )
File selection error; see long text ( SCPR 146 )
Inconsistent data in BC Set &; see long text ( SCPR 147 )
Validity (& - &) of BC Set & does not include System release (&) ( SCPR 148 )
Choose a valid namespace for BC Set &1 ( SCPR 149 )
BC Set contains data for nonexistent table field: & - & ( SCPR 151 )
This IMG activity does not contain any table-like customizing objects ( SCPR 160 )
Key field attribute set to 'Unchangeable after Activation' ( SCPR 161 )
Key field attribute set to 'Get Value at Activation' ( SCPR 162 )
Activation error; see long text ( SCPR 167 )
Only use simple BC Sets, not hierarchical ones ( SCPR 170 )
Variable field text write error; see long text ( SCPR 174 )
Activation links were not added to transport request &1 ( SCPR 176 )
BC Set &1 contains incomplete data records from client &2 ( SCPR 177 )
Data part added to incomplete data records. Save ( SCPR 178 )
You are not authorized to maintain BC Sets ( SCPR 179 )
No BC Set found in current system &1 ( SCPR 184 )
No unique table assignment. No time stamp ( SCPR 185 )
No detail data for BC Set &1 ( SCPR 186 )
No BC Set values found for table &1 ( SCPR 187 )
All existing BC Set change documents are displayed ( SCPR 196 )
There are no change documents for the selection criteria ( SCPR 197 )
Internal Error: Custom container could not be created ( SCPR 199 )
Internal error: ALV grid object could not be created ( SCPR 201 )
Internal error: Output list could not be generated ( SCPR 203 )
Invalid release at activation ( SCPR 206 )
BC Set &1 has key conflicts with BC Set &2 ( SCPR 209 )
No transport numbers. Transport system is active in activation system ( SCPR 219 )
No BC Set found in activation system ( SCPR 221 )
Older versions exist; adjust BC Sets first ( SCPR 222 )
Internal error: No BC Set names specified ( SCPR 225 )
&1 of BC Set &2 ended with errors ( SCPR 226 )
&1 of BC Set &2 ended with unknown result ( SCPR 227 )
View read error; see long text ( SCPR 228 )
BC Sets cannot be activated in production systems; see the long text ( SCPR 229 )
You cannot activate the specified BC Sets ( SCPR 232 )
BC Sets were passed for activation more than once ( SCPR 233 )
&1 ended with warning ( SCPR 234 )
&1 ended with errors ( SCPR 235 )
&1 was canceled ( SCPR 236 )
Activation canceled in accordance with default settings; see long text ( SCPR 237 )
Error getting transport numbers ( SCPR 241 )
Transport number check error no. &1 ( SCPR 242 )
No authorization for RFC call ( SCPR 245 )
No authorization to create BC Sets ( SCPR 246 )
&1 has no authorization to activate BC Sets in System &2(&3) ( SCPR 247 )
BC Set data read error ( SCPR 248 )
&1 of customizing object &2 with errors ( SCPR 259 )
&1 of customizing object &2 ended with unknown result ( SCPR 265 )
Table &1 assigned to customizing object &2 ( SCPR 266 )
Customizing object &1 not found ( SCPR 267 )
Adjust the BC Sets first ( SCPR 268 )
Internal error: BC Sets passed as list and individual value ( SCPR 272 )
Function module call error ( SCPR 273 )
Customizing cannot be changed in client &1 ( SCPR 275 )
No objects assigned to the IMG activity ( SCPR 277 )
Not all data was activated in all languages in object &1 ( SCPR 278 )
&1 of customizing object &2 ended with warning ( SCPR 279 )
No data to be compared ( SCPR 280 )
Software component assignment problems ( SCPR 282 )
Invalid BC Set activation component assignments ( SCPR 286 )
The selected namespace '&1' is invalid ( SCPR 291 )
The name of BC Set & is too long (max. & characters allowed) ( SCPR 292 )
Activation link write error ( SCPR 293 )
Internal error: Data record key incomplete ( SCPR 295 )
Data was not added to transport request when activated ( SCPR 296 )
Internal error & ( SCPR 298 )
Error filling transport tables of object &1 ( SCPR 304 )
User-defined languages are not installed in the system ( SCPR 305 )
BC Set &1 does not contain all language-dependent data ( SCPR 306 )
BC Set contains incomplete data records ( SCPR 308 )
No BC Set deletion authorization ( SCPR 309 )
Error reading the data for table/view &1 from transport &2 ( SCPR 310 )
F4 help error ( SCPR 311 )
Internal error: No BC Sets passed ( SCPR 312 )
You cannot go into change mode ( SCPR 318 )
You cannot go into create mode ( SCPR 319 )
No BC Set display authorization ( SCPR 331 )
Data records for table/view &1 are deleted from BC Set when you save ( SCPR 334 )
Message &1 &2 does not exist; see long text ( SCPR 336 )
Transport object '&1 &2 &3' cannot be put in the BC Set ( SCPR 337 )
No authorization to read the data from table/view &1 ( SCPR 338 )
Data records of table/view &1 only read in logon language ( SCPR 339 )
Customizing object '&1' cannot be put in a BC Set ( SCPR 340 )
No data records for transport object '&1 &2 &3' read ( SCPR 344 )
Data records for table/view &1 only read in logon language ( SCPR 349 )
BC Set tables cannot be put in BC Sets ( SCPR 351 )
No customizing object found for table &1 ( SCPR 352 )
System parameter read error ( SCPR 353 )
Error reading transport request &1 ( SCPR 355 )
Customizing data not recorded in BC Set (see long text) ( SCPR 356 )
Activation of customizing objects is not supported ( SCPR 357 )
BC Set &2: The activation of customizing object &1 is not supported ( SCPR 358 )
Complete activation not possible because of system settings ( SCPR 359 )
Activation of object &1 not possible because of system settings ( SCPR 360 )
No customizing transport found ( SCPR 361 )
No system transport found ( SCPR 362 )
Activatiin of table/view &1 in BC Set &2 is not supported ( SCPR 363 )
System transport not filled ( SCPR 364 )
Table/view &1 cannot be put in a BC Set ( SCPR 365 )
BC Set contains data records for tables which are no longer allowed ( SCPR 368 )
Inconsistent data records removed from the BC Set ( SCPR 369 )
Data from transport not recorded in BC Set ( SCPR 370 )
No data found for recording in BC Set ( SCPR 371 )
Table/view &1 cannot be put in a BC Set ( SCPR 372 )
System table &1 cannot be put in a BC Set ( SCPR 373 )
Application table &1 cannot be put in a BC Set ( SCPR 374 )
Table &1 for storing temporary data cannot be included ( SCPR 375 )
Key fields of table/view &1 cannot be included ( SCPR 377 )
You have no Favorites. Search function under 'New BC Set Selection' ( SCPR 378 )
&1 has no authorization to activate BC Sets in &2(&3) in expert mode ( SCPR 379 )
You have no authorization to enhance BC Set documentation ( SCPR 380 )
You are not authorized to change fixed values ( SCPR 381 )
Invalid data records deleted from BC Set &1 ( SCPR 382 )
Documentation error; see long text ( SCPR 389 )
Documentation of BC Set &1 saved as raw ( SCPR 391 )
Documentation of BC Set &1 saved in status 'active' ( SCPR 392 )
Documentation of BC Set &1 cannot be enhanced ( SCPR 393 )
Maintain/enhance the document in language &1 ( SCPR 394 )
Generation error: & ( SCPR 396 )
No BC Set found in the file &1; see long text ( SCPR 398 )
No data record activation information ( SCPR 399 )
BC Set &1 not found; Activation information obsolete ( SCPR 400 )
Data record not in BC Set &1; Activation information obsolete ( SCPR 401 )
Activation information obsolete; internal error ( SCPR 402 )
Project IMG &1 or project view read error ( SCPR 403 )
Reference IMG read error ( SCPR 404 )
The selected project IMG &1 does not exist ( SCPR 405 )
Table/view &1 key is not supported ( SCPR 406 )
Status information in data record activation information ( SCPR 407 )
Table key not supported by activation links ( SCPR 408 )
Internal BC Set variable input check error ( SCPR 409 )
Position the cursor on a customizing object for the activity ( SCPR 410 )
BC Set &2 is locked by user &1. Processing not possible ( SCPR 412 )
BC Set &1 cannot be changed because of transport restrictions ( SCPR 414 )
Specify a valid BC Set name ( SCPR 415 )
BC Set &1 could not be locked ( SCPR 418 )
One or more BC Sets could not be locked ( SCPR 419 )
Internal HTML viewer error ( SCPR 424 )
Field &1 of table/view &2 is removed from the BC Set ( SCPR 425 )
The forbidden field &1 in table/view &2 is removed from the BC Set ( SCPR 426 )
Not all data of BC Set &2, object &1 activated ( SCPR 428 )
&1 ended with additional information ( SCPR 432 )
Field values could not be enhanced for all data records ( SCPR 433 )
Only a maximum of &2 fields can be shown for table &1 ( SCPR 435 )
Default user settings have been read ( SCPR 438 )
Table/view &1 is added to the current IMG activity ( SCPR 440 )
Customizing object &1 cannot be activated ( SCPR 441 )
You cannot fix data records after activating object &1 ( SCPR 442 )
Comply with the 'Fix Value' restrictions for cust. object &1 ( SCPR 444 )
Variable field text delete error; see long text ( SCPR 449 )
Short text delete error; see long text ( SCPR 450 )
BC Set delete error; see long text ( SCPR 451 )
BC Set delete error; see long text ( SCPR 452 )
New activity '&1' has been put in the BC Set ( SCPR 453 )
Activity '&1' is already in the BC Set ( SCPR 454 )
Table/view &1 is put in an incorrect IMG activity ( SCPR 455 )
New customizing object '&1' has been put in the activity '&2' ( SCPR 456 )
Select a simple BC Set from the list ( SCPR 457 )
Table &1 is already in the BC Set under the IMG activity '&2' ( SCPR 458 )
Invalid release when activating BC Sets ( SCPR 459 )
Customizing objects not found ( SCPR 460 )
Key conflicts at activation ( SCPR 461 )
Default system setting values have been read ( SCPR 462 )
Selection of BC Sets found has been restricted to &1 ( SCPR 465 )
Selected project view &1 does not exist ( SCPR 472 )
Key field &1 of type "GUID/UUID" cannot be variable ( SCPR 476 )
Activation option information ( SCPR 477 )
Assignment of customizing object &1 to IMG activity &2 is not compatible ( SCPR 478 )
You are not authorized for BC Set system administration ( SCPR 479 )
Duplicate data records have been removed from the BC Set ( SCPR 481 )
BC Set &1 has internal numbering errors. You cannot save it ( SCPR 482 )
Old settings (CP parameters) are respected under 'Default' ( SCPR 483 )
User settings have been updated; CP parameters are inactive ( SCPR 484 )
After Import method of object &1 not called because of object error ( SCPR 489 )
Activation link table &1 lock error ( SCPR 490 )
Restricted support for activation links in subsequent systems ( SCPR 492 )
Functions are lost when activation links are deactivated ( SCPR 493 )
Assignment of object &1 (type '&2') to IMG activity &3 not found ( SCPR 495 )
Key of table/view &1 interrupted by non-key fields ( SCPR 496 )
Overall display not possible, restricted to activated data records ( SCPR 504 )
Key length is not currently supported ( SCPR 511 )
No activated data records; overall display not possible ( SCPR 513 )
Table/view &1 cannot be used in BC Sets ( SCPR 520 )
You cannot put system object &1 in a BC Set ( SCPR 522 )
Translation error in table &1 in language &2: &4 times attribute val '&3' ( SCPR 523 )
View &1 has the maintenance status 'Read-Only' ( SCPR 524 )
BC Set &1 contains incomplete data records ( SCPR 526 )
The current change in data selection for object &1 will be lost ( SCPR 527 )
Invalid value &1 of parameter &2 in function module call &3 ( SCPR 551 )
Internal BC Set &1 errors. You cannot save it ( SCPR 553 )
System transport &1 is invalid ( SCPR 558 )
Customizing transport &1 is invalid ( SCPR 559 )
Field &1 in table/view &2 set to 'Variable (Get Value)' ( SCPR 571 )
Invalid value &1 of parameter &2 in module &3 ( SCPR 575 )
Original language of BC Set (&1) does not match the logon language ( SCPR 576 )
Data record with key '&1' of tab. &2 not put in BC Set ( SCPR 592 )
Client-dependency of data in Switch BC Set &1 not specified ( SCPR 593 )
Cascading of data in Switch BC Set &1 not specified ( SCPR 594 )
Switch BC Set &: Client-dependency and cascading not spezified ( SCPR 595 )
Internal error writing change documents: & ( SCPR 600 )
Content was classified as client-specific and cascadable ( SCPR 617 )
Content is classified as client-specific and not cascadable ( SCPR 618 )
Contents classified as cross-client ( SCPR 619 )
No package found for BC Set &1 ( SCPR 620 )
BC Set &1: The BC Set is not assigned to a switch ( SCPR 624 )
Classification of Switch BC Set does not match object ( SCPR 628 )
Data record with key '&1' of tab. &2 not put in BC Set ( SCPR 637 )
BC Set &1: The BC Set is of the category '&2' ( SCPR 641 )
&2 data records deleted because of generic entries in BC Set &1 ( SCPR 656 )
BC Set &1, Client &2: AI Method &3 (Object &4) does not run ( SCPR 657 )
BC Set &1 contains &2 redundant data records because of gen. keys ( SCPR 659 )
No recording data in Switch BC Set ( SCPR 663 )
Transport request contains incomplete BC Sets - Cannot be released ( SCPR 664 )
No data to show log overview ( SCPR 667 )
BC Set &1 (Category '&2') is not a Switch BC Set ( SCPR 680 )
Category '&1' of BC Set &2 is not allowed ( SCPR 681 )
BC Set &1 contains incomplete data records ( SCPR 688 )
&1 forbidden/redundant data records removed from BC Set &2 ( SCPR 700 )
Generic data record '&1' of table &2 is redundant in BC Set &3 ( SCPR 701 )
Data record '&1' of table/view &2 is in customer namespace ( SCPR 703 )
1 forbidden/redundant data record removed from BC Set &1 ( SCPR 705 )
New customizing object '&1' put in BC Set ( SCPR 713 )
Table/view &1 put completely into Switch BC Set generically ( SCPR 716 )
Table/view &1 put into BC Set completely ( SCPR 717 )
User language &1 (&2) is not in BC Set &3 ( SCPR 718 )
Language &1 (&2) in BC Set &3 is not a user language ( SCPR 719 )
Language &1 (&2) in BC Set &3 is not a system language ( SCPR 720 )
Incompletely-specified data records must be edited manually ( SCPR 722 )
Data record '&1' of table/view &2 is not in the logon language ( SCPR 725 )
Data record '&1' of table/view &2 is not in the logon language ( SCPR 726 )
Data record '&1' in language '&3' in table/view &2 was ignored ( SCPR 727 )
Data record '&1' in language '&3' in table/view &2 was ignored ( SCPR 728 )
Transport request &1 does not contain a primary table for view/S table &2 ( SCPR 731 )
Data record '&1' of table/view &2 must be edited manually ( SCPR 733 )
BC Set &1, Table &2: Invalid generic key ( SCPR 738 )
BC Set &1, Client &2, Table &3: SML for data record '&4' ( SCPR 741 )
BC Set &1, Table &2: SML for data record &3 ( SCPR 742 )
Data records for table/view &1 are only read in the logon language ( SCPR 743 )
Data records for table/view &1 are only read in the logon language ( SCPR 744 )
BC Set &1, Client &2, Table &3: Error in gen. deletion of '&4' ( SCPR 748 )
Generic data record '&1' could not be completely reconstructed ( SCPR 749 )
Object &2 (type '&3') is not used in BC Set &1 ( SCPR 750 )
Switch BC Set &1 contains data from more than one object ( SCPR 751 )
BC Set &1: Entry in exception list with activation step '&2' ( SCPR 773 )
Error reading data for customizing object '&1' (table '&2') ( SCPR 777 )
BC Set &1: No activation in Switch BC Set creation systems ( SCPR 779 )
Classify the Switch BC Set (client-dependence/cascading) ( SCPR 781 )
No BC Set-relevant keys found for transport object '&1 &2 &3' ( SCPR 790 )
BC Set &1, table &2: Data transfer to transport &3 failed ( SCPR 791 )
Table SCPRSKEYS of BC Set &1 is inconsistent ( SCPR 797 )
Classification of the contents of BC Set &1 and BC Set &2 is different ( SCPR 809 )
Attribute for special customizing not allowed for Switch BC Set &1 ( SCPR 810 )
Enhancement BC Set must be the same type as source BC Set ( SCPR 811 )
Field &1 for table/view &2 was not added to BC Set &3 ( SCPR 816 )
Attribute of field &1 in table/view &2 changed (&3 -> &4) ( SCPR 817 )
Field &1 for new/changed data records for table/view &2 in &3 "initial" ( SCPR 818 )
System settings forbid changes to Switch BC Sets &1 ( SCPR 824 )
You are not authorized to change the check result ( SCPR 873 )
Incorrect code page &1; must be a system code page ( SCPRFC 002 )
Language &1 (SAP key: &2) appears multiple times in the list ( SCPRFC 003 )
Internal error: Memory string contains errors (enter it again) ( SCPRFC 013 )
Internal error: Save string overflow during generation ( SCPRFC 014 )
Destination &1 is a Unicode system (code page &2) ( SCPRFC 015 )
The list only has empty language or code page entries ( SCPRFC 017 )
Set LANG. & &. Repeat RADNTLANG with exceptions ( SCPRFC 030 )
BC Set Consistency ( SCPR_ATC 000 )
View is Read Only ( SCPR_ATC 001 )
Software component does not exist in the current system ( SCPR_ATC 002 )
BC Set is obsolete in this system ( SCPR_ATC 003 )
BC Set is newer than the existing software component in the system ( SCPR_ATC 004 )
Switch BC Set: Client-dependency and cascading is not specified ( SCPR_ATC 005 )
Client-dependency of an object in Switch BC Set is not specified ( SCPR_ATC 006 )
Data cascading of an object in Switch BC Set is not specified ( SCPR_ATC 007 )
Switch BC Set is not assigned to a switch (see package assignment) ( SCPR_ATC 008 )
Entries in table SCPRSKEYS of a BC Set are inconsistent ( SCPR_ATC 009 )
BC Set has key conflicts; see long text ( SCPR_ATC 010 )
Switch BC Set contains data from more than one object ( SCPR_ATC 011 )
Used object is forbidden because of an existing BEFORE EXPORT method ( SCPR_ATC 012 )
Piece list of an object is empty ( SCPR_ATC 013 )
Used Table/View does not exist ( SCPR_ATC 014 )
SOBJ piece list for object is not consistent with DDIC piece list ( SCPR_ATC 015 )
View has undefined customizing delivery class ( SCPR_ATC 016 )
View/table was added to customizing object manually in SOBJ piece list ( SCPR_ATC 017 )
SOBJ piece list for table/view in customizing object is not consistent ( SCPR_ATC 018 )
View/table contains tables with different cascading attributes ( SCPR_ATC 019 )
View/table in object has incorrect cascading attributes ( SCPR_ATC 020 )
Field in BC Set is not in the table/view ( SCPR_ATC 021 )
Assignment of View/Table to customizing object is inconsistent ( SCPR_ATC 022 )
No request number was passed for the invisible processing. ( SCR3 110 )
Table &1 from system &2 cannot be converted to local format ( SCRM 003 )
No authorization to access table &2 through RFC ( SCRM 004 )
No authorization to access cross-client table &1 ( SCRM 005 )
No authorization to display table &1 ( SCRM 006 )
No authorization to maintain table &1 ( SCRM 007 )
Not enough work processes available (-> see long text) ( SCRM 051 )
RFC: System termination in remote system ( SCRM 055 )
RFC: Problem during connection setup or communication ( SCRM 056 )
RFC: No RFC authorization for function group &2 ( SCRM 057 )
&1: Wrong parameter value for &2. &3 &4 ( SCRM 115 )
Global class &1 of check &2 contains syntax errors ( SCRM 119 )
User &1 unknown (see help) ( SCRM 135 )
Select at most &1 entries ( SCRM 149 )
No documentation available for this check ( SCRM 150 )
Last check run not yet completed, only restart possible ( SCRM 180 )
Check configuration is incomplete ( SCRM 304 )
Object filter &1 does not exist (->see long text) ( SCRM 703 )
No CheckMan news available ( SCRM 706 )
cPro Project &1 unknown (see help) ( SCRM 791 )
Messages referring to check &1 cannot be checked again. ( SCRM 803 )
RFC destination & does not exist ( SCRM 900 )
No client field found in table &1 ( SCRR_IUUC 006 )
Maximum assignment of background processes should be &1 . ( SCRR_TST 015 )
For config id &1 and table &2 a field &3 is assigned that is a key field ( SCRR_TST 019 )
Set in transaction snro: object=crr_tfw_id ( SCRR_TST 054 )
File &1 not correctly filled. See long text. ( SCRR_TST 092 )
Threshold values set incorrectly: Y2G(&1); G2Y(&2); R2Y(&3); Y2R(&4) ( SCSM_GTC 051 )
Threshold values set incorrectly: Y2R(&1); R2Y(&2); G2Y(&3); Y2G(&4) ( SCSM_GTC 052 )
No analysis function exists for Monitor Attribute &1 ( SCSM_GTC 054 )
Error occurred while deleting Monitor Attribute &1: '&2&3&4' ( SCSM_GTC 056 )
Referenced object type &1 &2 doesn't exist. ( SCTS_AIM 003 )
Lock mode is undefined for table &1 in metadata of object &2 type &3. ( SCTS_AIM 008 )
API &1 not defined but referenced by API &2. ( SCTS_AIM 009 )
Object type &1 &2: No AIM meta data maintained. ( SCTS_AIM 010 )
AIM meta data of object type &1 &2 is not consistent. ( SCTS_AIM 012 )
API metadata inconsistent. ( SCTS_AIM 014 )
API &1: no meta data maintained. ( SCTS_AIM 015 )
Invalid Software Component(s) &1 specified for &2 &3 ( SCTS_AIM 022 )
No start release information provided. ( SCTS_AIM 023 )
Lock mode conflict (&2 <-> &3) for table &1 with AIM of SOBJ-type &4 ( SCTS_AIM 024 )
AIM &1 &2 &3 not ZDM enabled according to AIM repository. ( SCTS_AIM 030 )
AIM &1 &2 &3 not ZDM enabled. No meta data found in AIM repository. ( SCTS_AIM 031 )
SL_API &1 not ZDM enabled according to SL_API repository. ( SCTS_AIM 033 )
SL_API &1 not ZDM enabled. No meta data found in SL_API repository. ( SCTS_AIM 034 )
SL API &1 not ZDM enabled according to implementation of IF_TR_CTS_SLAPI. ( SCTS_AIM 044 )
OBJM &1 can not be deleted. It is currently referenced by &2 &3 &4. ( SCTS_AIM 050 )
The following definitions cannot be deleted: &1 &2 &3 &4 ( SCTS_AIM 051 )
Table lock modes changed to "completely locked" for this AIM/API. ( SCTS_AIM 056 )
No lock modes adjustment P -> X needed. No tables with lock mode P found. ( SCTS_AIM 058 )
Lock mode conflict (&2 <-> &3) for table &1 with SLAPI-entry &4 ( SCTS_AIM 059 )
Lock mode conflict (&2 <-> &3) for table &1 with AIM of SOBJ-type &4 ( SCTS_AIM 060 )
Lock mode conflict (&2 <-> &3) for table &1 with SLAPI-entry &4 ( SCTS_AIM 061 )
Lock mode is undefined for table &1 in metadata of API &2. ( SCTS_AIM 062 )
Table &1 in metadata of object &3 type &2 does not exist ( SCTS_AIM 063 )
ZDO meta data for a transport object type that does no longer exist. ( SCTS_AIM 070 )
ZDO meta data for an after-import-method that does no longer exist. ( SCTS_AIM 071 )
ZDO meta data for &1 &2 to be deleted but still referenced by &3 &4. ( SCTS_AIM 072 )
File transmission: Expected digest "&1", file "&2&3&4" ( SCTS_CTL_DEPLOYER 011 )
Customizing synchronization not possible from this system ( SCTS_CTO_CUST_SYNC 001 )
Change request &1 is not assigned to a Customizing project ( SCTS_CTO_CUST_SYNC 002 )
Could not contact system &1(&2) - see long text for details ( SCTS_DIST_CTL_CHNGTR 007 )
Release of system &1 is not supported ( SCTS_DIST_CTL_COMAPI 002 )
Unknown technical problem with system &1 occurred. Check TMS Alerts ( SCTS_DIST_CTL_COMAPI 005 )
tp command &1 reported an error for system &2. Check TMS Alerts ( SCTS_DIST_CTL_COMAPI 007 )
Transport tools need to be updated in communication system &1 ( SCTS_DIST_CTL_COMAPI 008 )
Transport Organizer destination &2 to system &1 is missing ( SCTS_DIST_CTL_COMAPI 009 )
Import destination &2 to system &1 is missing ( SCTS_DIST_CTL_COMAPI 010 )
Deploy destination &2 to system &1 is missing ( SCTS_DIST_CTL_COMAPI 011 )
&1 plug-in in system &2 is outdated or does not exist. Update plug-in ( SCTS_DIST_CTL_COMAPI 012 )
Cannot find &1 plug-in for release &2 and SP &3 ( SCTS_DIST_CTL_COMAPI 013 )
TMS parameter MANAGED_SYSTEM is not set correctly for system &1 ( SCTS_DIST_CTL_COMAPI 015 )
TMS parameter OPERATION_MODE is not set correctly for system &1 ( SCTS_DIST_CTL_COMAPI 016 )
TMS parameter NON_ABAP_WBO_CLIENT is not set correctly for system &1 ( SCTS_DIST_CTL_COMAPI 017 )
Transport Organizer destination not needed; &1 ( SCTS_DIST_CTL_COMAPI 021 )
Import destination not needed; &1 ( SCTS_DIST_CTL_COMAPI 022 )
Deploy destination not needed; &1 ( SCTS_DIST_CTL_COMAPI 023 )
Transport Organizer destination cannot be validated; &1 ( SCTS_DIST_CTL_COMAPI 032 )
Deploy destination cannot be validated; &1 ( SCTS_DIST_CTL_COMAPI 033 )
Import destination cannot be validated; &1 ( SCTS_DIST_CTL_COMAPI 034 )
Component CTS_PLUG installed in system &1 ( SCTS_DIST_CTL_COMAPI 049 )
Component CTS_PLUG installed in communication system &1 of system &2 ( SCTS_DIST_CTL_COMAPI 050 )
Component CTS_PLUG not installed in system &1 ( SCTS_DIST_CTL_COMAPI 051 )
Component CTS_PLUG not installed in communication system &1 of system &2 ( SCTS_DIST_CTL_COMAPI 052 )
Job triggered by event &1 not needed due to operation mode &2 ( SCTS_DIST_CTL_COMAPI 067 )
&3 job(s) triggered by event &1 exists for system &2 ( SCTS_DIST_CTL_COMAPI 069 )
No job triggered by event &1 exists for system &2 ( SCTS_DIST_CTL_COMAPI 070 )
System &1 is not available ( SCTS_DIST_CTL_COMMON 100 )
Central CTS configuration only possible on domain controller ( SCTS_DIST_CTL_LNDSCP 020 )
Could not add system &1 ( SCTS_DIST_CTL_LNDSCP 024 )
Manual import of CTS service plug-in required for system &1 ( SCTS_DIST_CTL_LNDSCP 052 )
Import queue Web UI activated for system cluster ( SCTS_DIST_CTL_TRANSP 022 )
Navigation to system &3 is not possible; for more information, click link ( SCTS_DIST_CTL_TRANSP 070 )
Queue is in display mode; to change, choose "Execution Mode" ( SCTS_DIST_CTL_TRANSP 071 )
Navigation to SAP GUI is deactivated ( SCTS_DIST_CTL_TRANSP 072 )
Cannot forward transports to system &1 ( SCTS_DIST_CTL_TRANSP 074 )
Welcome Overview ( SCTS_DIST_CTL_UPGRAD 002 )
Welcome Details ( SCTS_DIST_CTL_UPGRAD 003 )
Welcome Next ( SCTS_DIST_CTL_UPGRAD 004 )
Select System - Explain ( SCTS_DIST_CTL_UPGRAD 005 )
Select System - Next ( SCTS_DIST_CTL_UPGRAD 006 )
Select Task - Next ( SCTS_DIST_CTL_UPGRAD 008 )
Select Transport - Explain ( SCTS_DIST_CTL_UPGRAD 009 )
Select Transport - Next ( SCTS_DIST_CTL_UPGRAD 010 )
Confirm - Explain ( SCTS_DIST_CTL_UPGRAD 011 )
Confirm - Next ( SCTS_DIST_CTL_UPGRAD 012 )
Download - Explain ( SCTS_DIST_CTL_UPGRAD 013 )
Download - Explain Extended ( SCTS_DIST_CTL_UPGRAD 014 )
Confirm - Explain Extended ( SCTS_DIST_CTL_UPGRAD 015 )
Error in execution of HDI call: &1&2&3&4 ( SCTS_HDI 001 )
Error in configuration; no HDI transports possible ( SCTS_HDI 004 )
The name of container group &1&2&3&4 contains invalid literals ( SCTS_HDI 005 )
Object already exists in development environment ( SCTS_HDI 029 )
HDI call ended with error; details in HDI log for request ID &1 ( SCTS_HDI 030 )
HDI call ended with fatal error; details in HDI log for request ID &1 ( SCTS_HDI 031 )
HDI call ended with warning; details in HDI log for request ID &1 ( SCTS_HDI 032 )
Cannot check out object (it does not exist in HTA) ( SCTS_HDI 033 )
You do not have authorization for this action (see long text) ( SCTS_HDI 049 )
Object not the same in HDI and WebIDE; deploy &1&2&3&4 first ( SCTS_HDI 050 )
HDI namespace &1&2 in container &3 too long for transport system ( SCTS_HDI 052 )
File .hdinamespace cannot be modified or created manually ( SCTS_HDI 053 )
HDI object path &1&2&3&4 is invalid ( SCTS_HDI 054 )
Upgrade running (changes to HDI objects are not allowed) ( SCTS_HDI 073 )
&1 is not a valid name of a logical HDI container ( SCTS_HDI 081 )
A logical database schema with the name &1 already exists ( SCTS_HDI 085 )
Inactive version of the object in HTA Repository (activate it first) ( SCTS_HDI 087 )
Object was created manually in Web IDE but not yet checked out ( SCTS_HDI 088 )
Object was changed in HTA Repository and Web IDE (check it out first) ( SCTS_HDI 089 )
Object cannot be checked in in status &1 (check it out first) ( SCTS_HDI 090 )
Start of deployment of HDI objects: &1 ( SCTS_HDI 201 )
Start of import of &1 HDI objects for container &2: &3 ( SCTS_HDI 203 )
Start of 'Make' with &1/&2 objects to activate, &3/&4 to delete ( SCTS_HDI 214 )
&1/&2 objects activated, &3/&4 objects deleted ( SCTS_HDI 216 )
&1/&2 objects with activation error, &3/&4 objects with delete error ( SCTS_HDI 217 )
Start of 'Write' with &1/&2 HDI objects and &3 folders ( SCTS_HDI 218 )
&1/&2 objects imported, &3/&4 objects with import errors ( SCTS_HDI 220 )
Start of 'Delete' with &1/&2 HDI objects ( SCTS_HDI 223 )
&1/&2 objects deleted inactively, &3/&4 objects with errors ( SCTS_HDI 225 )
Objects already active: &1 ( SCTS_HDI 227 )
Error in activation phase &1 (maximum &2) for container &3 ( SCTS_HDI 233 )
Activation phase &1 (maximum &2) ( SCTS_HDI 234 )
No details for activation phase &1 (maximum &2) in this log ( SCTS_HDI 236 )
Start of activation of &1 HDI objects for container &2: &3 ( SCTS_HDI 237 )
Skipped objects since container &1 is not active: &2 ( SCTS_HDI 239 )
Skipping HDI object deployment for HDI container &1 ( SCTS_HDI 240 )
Ignoring cycle in HDI container &1 and attempting object deployment ( SCTS_HDI 241 )
Activation canceled. Maximum number of retries reached. ( SCTS_HDI 242 )
Activation canceled. Object set to activate remains constant. ( SCTS_HDI 243 )
Error when deploying HDI objects; see &1 and SAP Note 2602571 ( SCTS_HDI 244 )
Error in "update/upgrade running?" query ( SCTS_HDI 245 )
HDI object deployment log: &1&2 ( SCTS_HDI 246 )
Error in deployment of HDI objects in SAP data container; see &1 ( SCTS_HDI 247 )
ABAP-managed HDI container &1 does not exist or is not active ( SCTS_HDI 248 )
Warnings in deployment of HDI objects; see &1 ( SCTS_HDI 249 )
HDI objects were deployed; see &1 ( SCTS_HDI 250 )
The following HDI objects were not deployed: ( SCTS_HDI 252 )
Container &1 has an inactive version ( SCTS_HDI 303 )
Inactive objects: &3 ( SCTS_HDI 304 )
Objects that do not match in HTA and HDI: &3 ( SCTS_HDI 305 )
Missing objects in HDI (container does not exist): &3 ( SCTS_HDI 306 )
Objects that only exist in HTA: &3 ( SCTS_HDI 309 )
Objects that only exist in HDI: &3 ( SCTS_HDI 310 )
Objects with deletion/deployment errors: &3 ( SCTS_HDI 318 )
Deployment simulation not possible (HDI container &1 is not active) ( SCTS_HDI 321 )
Inconsistencies between HTA and HDI; see SAP Note 2602487 ( SCTS_HDI 335 )
Deployment simulation ended with errors (see SAP Note 2602487) ( SCTS_HDI 336 )
HDI namespace &1&2&3&4 already exists as a non-generated namespace ( SCTS_HDI 402 )
Objects cannot be generated for container &1 ( SCTS_HDI 403 )
Log is empty ( SCTS_HDI 498 )
HDI container checks started ( SCTS_HDI 501 )
Check on active referenced containers/schemas (for &1) started ( SCTS_HDI 502 )
Logical HDI container &1 exists but is inactive ( SCTS_HDI 503 )
Check for cycles (for &1) started ( SCTS_HDI 507 )
Cycle for container &1 found: ( SCTS_HDI 508 )
Data container &1 cannot have any references ( SCTS_HDI 513 )
&1 &2 cannot reference API container &3 ( SCTS_HDI 514 )
API container &1 cannot reference data container &2 ( SCTS_HDI 517 )
Deployment for HDI container &1 started: &2 ( SCTS_HDI 522 )
HDI container deployment started ( SCTS_HDI 524 )
Skipping deployment for HDI container &1 ( SCTS_HDI 532 )
Logical HDI container &1 does not exist ( SCTS_HDI 550 )
Logical database schema &1 does not exist ( SCTS_HDI 551 )
Logical database schema &1 exists but is inactive ( SCTS_HDI 552 )
Logical DB schema &1 is active and physical DB schema is assigned ( SCTS_HDI 553 )
Logical DB schema &1 is active but no physical DB schema assigned ( SCTS_HDI 554 )
Cannot save (newer object version &1 exists) ( SCTS_HDI 701 )
HDI object is checked out in SAP Web IDE (see long text) ( SCTS_HDI 702 )
Cannot save (HDI object was deleted by transport request import) ( SCTS_HDI 704 )
Newer object version &1 exists (editor loads new version) ( SCTS_HDI 705 )
Error in communication with SAP HANA: &1&2&3&4 ( SCTS_HOT 000 )
Error when reading object &1 (error &3: &4) ( SCTS_HOT 001 )
Error when reading package &1&2 (error &3: &4) ( SCTS_HOT 002 )
Object not found in HTA repository. &1 &2 ( SCTS_HOT 007 )
Object cannot be deployed in its current status (&2). &1 ( SCTS_HOT 008 )
Package cannot be deployed in its current status (&2). &1 ( SCTS_HOT 009 )
Error when writing object &1 (error &3: &4) ( SCTS_HOT 010 )
Package not found in HTA repository: &1 ( SCTS_HOT 012 )
Error when creating package &1 (error &3: &4) ( SCTS_HOT 013 )
Transport tools need to be updated ( SCTS_HOT 021 )
Original language missing for package &1&2&3&4 ( SCTS_HOT 022 )
Original language &4 not supported ( SCTS_HOT 023 )
Cannot synchronize object in current status (&4). &1&2&3 ( SCTS_HOT 025 )
Cannot synchronize package in current status (&4). &1&2&3 ( SCTS_HOT 026 )
Object exists in different case in the HTA repository ( SCTS_HOT 027 )
Package exists with different case in the HTA repository ( SCTS_HOT 028 )
Synchronize the objects of the selected packages (if required) ( SCTS_HOT 029 )
Deployment ended with: &1 ( SCTS_HOT 030 )
You are not authorized to deploy HANA repository packages/objects ( SCTS_HOT 031 )
Start of deployment of SAP HANA repository objects: &1 ( SCTS_HOT 508 )
The following transport objects were skipped: ( SCTS_HOT 514 )
Packages not deployed (already deployed): &1 ( SCTS_HOT 528 )
&1&2&3&4 ( SCTS_HOT 530 )
&1&2&3&4 ( SCTS_HOT 532 )
&1&2&3&4 ( SCTS_HOT 537 )
&1&2&3&4 ( SCTS_HOT 538 )
Attempt &1: Activating &2 objects ( SCTS_HOT 539 )
&1&2&3&4 ( SCTS_HOT 540 )
No details for this activation attempt in this log ( SCTS_HOT 542 )
&1&2&3&4 ( SCTS_HOT 543 )
&1&2&3&4 ( SCTS_HOT 544 )
&1&2&3&4 ( SCTS_HOT 546 )
&1&2&3&4 ( SCTS_HOT 547 )
&1&2&3&4 ( SCTS_HOT 549 )
Objects not deployed (already deployed): &1 ( SCTS_HOT 550 )
HANA time stamp (&4): &1, HANA severity &2, HANA return code: &3 ( SCTS_HOT 564 )
HANA time stamp (&4): &1, HANA severity: &2, HANA return code: &3 ( SCTS_HOT 567 )
The following transport objects were not imported (or deployed): ( SCTS_HOT 578 )
Skipped packages (deactivated by switch): &1 ( SCTS_HOT 580 )
Skipped objects (deactivated by switch): &1 ( SCTS_HOT 582 )
Skipped packages (prework not yet done): &1 ( SCTS_HOT 584 )
Skipped objects (prework not yet done): &1 ( SCTS_HOT 586 )
&1 in the HTA WB activation; see the log ( SCTS_HOT 588 )
At least one package/object deleted in ABAP; prework needed ( SCTS_HOT 592 )
Languages where texts were deployed: &1&2 ( SCTS_HOT 598 )
Objects without text deployment due to import/activation errors: &1 ( SCTS_HOT 600 )
Objects where no text deployment was required: &1 ( SCTS_HOT 601 )
No texts to deploy were found for the following objects: ( SCTS_HOT 602 )
Objects with errors in text deployment: &1 ( SCTS_HOT 603 )
No text deployment for objects not in the HTA repository: ( SCTS_HOT 605 )
No text deployment for objects with import/activation errors: ( SCTS_HOT 606 )
The following objects were deleted inactively (no activation needed): ( SCTS_HOT 607 )
The following objects were deleted inactively (no activation needed): ( SCTS_HOT 608 )
Objects for which no active deletion was required: &1 ( SCTS_HOT 611 )
Try number &1: Activation of &2 successful objects from previous try ( SCTS_HOT 613 )
HTA parameters: &1&2&3&4 ( SCTS_HOT 614 )
&1&2&3&4 ( SCTS_HOT 615 )
&1&2&3&4 ( SCTS_HOT 616 )
Activation canceled. Maximum number of retries reached. ( SCTS_HOT 617 )
Activation canceled. Object set to activate remains constant. ( SCTS_HOT 618 )
A deployment is already running. Please try again later. ( SCTS_HOT 620 )
Redeployment of objects with errors started for HDI=&1,HANA Repository=&2 ( SCTS_HOT 621 )
HTA parameters: &1&2&3&4 ( SCTS_HOT 622 )
Locking the HOTA transport objects to be deployed took &1 seconds. ( SCTS_HOT 623 )
Redeployment of error objects scheduled for HDI=&1, HANA Repository=&2 ( SCTS_HOT 624 )
Packages not deployed because synchronized: &1 ( SCTS_HOT 625 )
Objects not deployed because synchronized: &1 ( SCTS_HOT 626 )
&1 ( SCTS_HTA_HDI_ADT 008 )
Packages cannot be deleted with maintenance view V_PACKMODE ( SCTS_PACKMODE 010 )
Package &4 is in maintenance mode: Object cannot be edited ( SCTS_PACKMODE 020 )
Package &2 is in development mode: You cannot reassign this package ( SCTS_PACKMODE 021 )
Package &2 is in maintenance mode: You cannot reassign this package ( SCTS_PACKMODE 022 )
Different categories for document &; see long text ( SCTS_SOBJ 004 )
Attributes for multiclient-compliance deleted ( SCTS_SOBJ 005 )
Message &1 &2 does not have a long text ( SCTS_TODO 001 )
Character string 'TMP','TEMP' or 'DUMMY' in name of program & ( SCTS_TODO 002 )
Program & does not exist ( SCTS_TODO 003 )
Program & is in customer namespace ( SCTS_TODO 004 )
Program & is in a test package ( SCTS_TODO 005 )
Software component of package does not match delivery flag ( SCTS_TODO 015 )
Package not assigned to a valid software component ( SCTS_TODO 016 )
Number of data records registered restricted to 30 ( SCTS_TODO 018 )
Object List Web UI started ( SCTS_WDUI_MSG 003 )
Table TCURR is locked by user & ( SCURMAINT 003 )
& is not a valid entry ( SCURMAINT 004 )
Factors missing for exchange rate type '&' and currency pair '&' ( SCURMAINT 005 )
Exchange rate of & is greater than 9999.99999 ( SCURMAINT 006 )
Exchange rate is less than 0.00001 ( SCURMAINT 007 )
New exchange rate falls beyond the defined tolerance ( SCURMAINT 008 )
Exchange rate missing ( SCURMAINT 010 )
You are changing an existing exchange rate ( SCURMAINT 011 )
You are not authorized to display exchange rates from worklist '&' ( SCURMAINT 012 )
You are no authorized to enter new exchange rates in worklist '&' ( SCURMAINT 013 )
You are not authorized to overwrite old exchange rates in worklist '&' ( SCURMAINT 014 )
No exchange rate relations are stored for currency pair & on & ( SCURMAINT 017 )
The exchange rate factors & for currency pair & are not valid until & ( SCURMAINT 018 )
For exchange rate type &, only rates with to-currency & are relevant ( SCURMAINT 104 )
Both currency keys are identical ( SCURMAINT 105 )
Implementation test could not proceed due to lack of system resources ( SCWB_NOTE_IMP_TEST 003 )
Error during converting results to XML for intervall &1. ( SCWB_NOTE_IMP_TEST 004 )
Saving results for interval &1 not successful. ( SCWB_NOTE_IMP_TEST 005 )
Unable to find SAP Note that meets specified criteria ( SCWN 001 )
SAP Note does not contain valid correction instructions ( SCWN 002 )
Not all required corrections were implemented ( SCWN 003 )
SAP Note already implemented ( SCWN 004 )
Objects from SAP Note are in multiple requests ( SCWN 006 )
SAP Note can be implemented in request &1 only ( SCWN 007 )
Unable to implement SAP Notes in specified order ( SCWN 011 )
Release track & & & does not exist ( SCWN 012 )
Obsolete SPAM version; import the latest SPAM/SAINT update ( SCWN 013 )
SAP Note implementation has already been reset ( SCWN 015 )
Data file of SAP Note is incomplete ( SCWN 017 )
Cannot disassemble data file with version & ( SCWN 018 )
Data for SAP Note & incomplete ( SCWN 022 )
SAP Note already implemented by Support Package ( SCWN 023 )
SAP Note already completely implemented ( SCWN 024 )
Unable to deimplement or reset to original, see long text ( SCWN 027 )
SAP Note obsolete, will be deimplemented ( SCWN 029 )
If you implement changes, object will contain syntax errors ( SCWN 031 )
Syntax errors were detected ( SCWN 032 )
No syntax errors found ( SCWN 033 )
If you do not implement changes, object will contain syntax errors ( SCWN 034 )
Request & invalid; enter all objects in request & ( SCWN 038 )
Not all objects were reset to SAP original ( SCWN 039 )
Processing status automatically changed to 'not relevant' ( SCWN 046 )
No correction instructions implemented for SAP Note & ( SCWN 047 )
User &1 is implementing SAP Notes ( SCWN 051 )
User &1 is importing Support Packages or an add-on ( SCWN 052 )
User &1 confirmed that he or she has read the SAP Note text ( SCWN 053 )
Reference to message &1 of Solution Manager added ( SCWN 054 )
Objects could not be included in a change request ( SCWN 064 )
Note &1 downloaded again and adjustment status recalculated ( SCWN 067 )
Manual activity &1 &2 &3 is not a pre- or post-implementation step ( SCWN 073 )
The current version of note & could not be downloaded ( SCWN 077 )
Request &1 contains function group &2 &3 &4 (see long text) ( SCWN 088 )
Modification adjustment: User &1 has confirmed reading SAP Note text ( SCWN 090 )
SAP Note &1 (&3) has not been released and cannot be implemented ( SCWN 091 )
No release data for Note & in the data file in the request ( SCWN 099 )
Software component & does not exist ( SCWN 101 )
SAP Note & not released ( SCWN 104 )
SAP Note & not available in language & ( SCWN 105 )
SAP Note & incomplete ( SCWN 106 )
Error occurred while downloading SAP Note & ( SCWN 107 )
This manual activity is not transportable ( SCWN 118 )
This manual activity is transportable ( SCWN 119 )
Help for the queue of correction inststructions to be installed ( SCWN 120 )
Confirm at least one manual activity ( SCWN 121 )
SAP Note & already completely implemented; see long text ( SCWN 201 )
Obsolete version &2 of SAP Note &1 implemented; see long text ( SCWN 202 )
SAP Note & incompletely implemented; see long text ( SCWN 203 )
SAP Note & previously implemented; see long text ( SCWN 204 )
SAP Note & not been implemented yet; see long text ( SCWN 205 )
SAP Note & cannot be implemented; see long text ( SCWN 206 )
SAP Note & already completely implemented ( SCWN 211 )
SAP Note &1 implemented in obsolete version &2 ( SCWN 212 )
SAP Note & incompletely implemented ( SCWN 213 )
SAP Note & obsolete; no action required ( SCWN 214 )
SAP Note & can be implemented ( SCWN 215 )
SAP Note & cannot be implemented ( SCWN 216 )
SAP Note & obsolete; deimplementation necessary ( SCWN 217 )
SAP Note locked in request &1 ( SCWN 285 )
Correction instructions &1 not implemented ( SCWN 287 )
Correction instructions &1 implemented with manual changes ( SCWN 288 )
&1 confirms implementation of SAP Note &2, not correction instructions &3 ( SCWN 296 )
&1 confirms deimplementation of SAP Note &2, but not correction instr. &3 ( SCWN 297 )
At least one object was not created again ( SCWN 304 )
At least one note was not implemented completely ( SCWN 305 )
Note description cannot be displayed ( SCWN 306 )
Adobe Document Service not installed ( SCWN 307 )
SAP Note &1 cannot be implemented completely ( SCWN 308 )
Method &1 &2 cannot be implemented ( SCWN 314 )
Interface &1 does not exist ( SCWN 315 )
Object locked in &1; SAP Note can be implemented under &2 only ( SCWN 316 )
Object &1 &2 does not exist; create it ( SCWN 317 )
Unable to apply changes for objects of this type ( SCWN 319 )
Object &1 &2 does not exist; changes cannot be applied ( SCWN 320 )
Object &1 &2 can no longer be deleted ( SCWN 321 )
Object type CPAK does not exist in this SAP Basis release ( SCWN 322 )
Confirmation: implement corrections contained in SAP Note ( SCWN 323 )
Changes can be applied ( SCWN 348 )
Not all corrections applied; see change display ( SCWN 349 )
All corrections applied already ( SCWN 350 )
Some corrections already exist; see change display ( SCWN 351 )
Changes already exist completely ( SCWN 352 )
Some changes already exist; see change display ( SCWN 353 )
Changes not applied; see change display ( SCWN 354 )
Corrections not applied; see change display ( SCWN 355 )
No changes to be implemented ( SCWN 356 )
Applying changes from & & to & ( SCWN 358 )
& & cannot be selected (it is already part of the applied changes) ( SCWN 361 )
Object cannot be created again. Object &3 &4 missing. ( SCWN 362 )
New creation impossible, since &3 &4 cannot be created ( SCWN 363 )
Unable to find delivery event & & & ( SCWN 420 )
Error during RFC connection to SAP, cannot update SAP Note ( SCWN 421 )
The following SAP Notes have not been released yet: ( SCWN 422 )
SAP Note can only be displayed once it has been downloaded ( SCWN 424 )
Object does not exist yet; customer must create new object ( SCWN 501 )
SAP Note &1 version &2 not released; implementation test with version &3 ( SCWN 502 )
Implementation test not possible since no version data exists ( SCWN 503 )
Implementation test not possible since not all SPs have versions ( SCWN 506 )
&2 &1: You are not authorized to grant special approvals ( SCWN 550 )
Request & has already been released ( SCWN 551 )
Missing special approvals (HOTPACKEXC), request not released. ( SCWN 556 )
Do not change objects of type &2 in Support Package systems ( SCWN 562 )
Prior approval is required to change type &2 objects in SP systems ( SCWN 563 )
Object contains customer modifications ( SCWN 564 )
Could not apply change to subobject &1 of &2 &3 ( SCWN 603 )
Function module &1 does not belong to function group &2 ( SCWN 609 )
Parameter &1 for function module &2 is not deleted or modified ( SCWN 611 )
Cannot delete/modify text for parameter &, function module & ( SCWN 612 )
Parameter &1 for function module &2 already exists ( SCWN 614 )
Cannot create text for parameter &1 of function module &2 ( SCWN 615 )
Object deleted ( SCWN 621 )
Object already exists and will be overwritten ( SCWN 623 )
Object does not exist yet and will be created ( SCWN 624 )
New object will be created ( SCWN 625 )
Do not apply changes; final state in &1 same as initial state in &2 ( SCWN 626 )
Could not save object; cause unknown ( SCWN 627 )
Objects that the system could not save ( SCWN 628 )
Object deleted ( SCWN 721 )
Object already exists and will be overwritten ( SCWN 723 )
Object does not exist yet and will be created ( SCWN 724 )
New object will be created ( SCWN 725 )
All changes already exist ( SCWN 735 )
Create the package first ( SCWN 737 )
Class contains complex type definitions ( SCWN 800 )
Could not read version in RFC connection &1 to system &2 ( SCWN 850 )
Cannot deimplement note &1 (no backup of transport-based instruction &2) ( SCWN 852 )
Mark all SAP Notes as "read" ( SCWN 898 )
Information: Manual activities required ( SCWN 899 )
Document is already being edited ( SD 002 )
Document cannot be locked for technical reasons ( SD 004 )
You have no authorization for documentation maintenance ( SD 010 )
Document locked by correction & ( SD 014 )
Choose a document class ( SD 021 )
Option saved ( SD 030 )
No authorization for end user documentation (raw version) ( SD 031 )
No authorization for end user documentation (final version) ( SD 032 )
No authorization for technical documentation (raw version) ( SD 033 )
No authorization for technical documentation (final version) ( SD 034 )
No translation authorization ( SD 038 )
Document was saved in raw version; no authorization for active version ( SD 039 )
Specify the name of the document ( SD 040 )
Enter an exact document name ( SD 044 )
Generic entries in position 1 and 2 not allowed ( SD 045 )
Program & does not exist ( SD 050 )
Message & & & does not exist ( SD 051 )
Data element & is not used in an ABAP Dictionary structure ( SD 052 )
Table & does not exist ( SD 053 )
Transaction & does not exist ( SD 054 )
Object & & does not require documentation ( SD 056 )
Authorization object & does not exist ( SD 057 )
Authorization profile & is not available ( SD 058 )
Choose an editing status ( SD 060 )
Make a selection ( SD 061 )
Select only one option ( SD 062 )
Choose a document class ( SD 063 )
You can only select the 'Not to be documented' option by itself ( SD 064 )
Work list & does not exist ( SD 071 )
Selection not possible here ( SD 073 )
Generic deletion is not possible ( SD 090 )
Data element & is not used on a dynpro ( SD 101 )
Load & is not current ( SD 105 )
Program & does not exist ( SD 106 )
Program & not generated ( SD 107 )
Program & is not a main program ( SD 108 )
Message class &1 contains the special character '+' ( SD 109 )
& cannot be changed in language & ( SD 110 )
& cannot be deleted in language & ( SD 112 )
You are not authorized for this document ( SD 120 )
& & not in table TADIR ( SD 121 )
You are not authorized for this document ( SD 122 )
Documentation already exists for this document ( SD 130 )
Documentation element is locked for further documentation ( SD 135 )
Object & & can be documented again ( SD 137 )
This function can only be used for data elements ( SD 138 )
You can only reference an object with a long text ( SD 142 )
Specify at least two letters or start in the background ( SD 150 )
Specify a package ( SD 151 )
Package & not found ( SD 152 )
Generic and range entry cannot be used at the same time. ( SD 153 )
Start generic analysis in the background ( SD 154 )
Specify documentation type "E" or "M" ( SD 155 )
Use only "X" or " "(space) for "Original system only" ( SD 156 )
Job could not be released ( SD 160 )
Object documentation reset. ( SD 164 )
Document name & contains forbidden special characters. ( SD 170 )
Document name & contains forbidden special characters. ( SD 171 )
Document name & contains forbidden special characters. ( SD 172 )
Document & saved ( SD 201 )
Document saved as & ( SD 203 )
You are not authorized for activation ( SD 208 )
Document cannot be copied onto itself ( SD 214 )
Specify a supplementary number ( SD 240 )
Dynpro & & no longer exists ( SD 252 )
You are not authorized to maintain this document ( SD 260 )
You do not have maintenance authorization ( SD 263 )
Maintain the attributes first ( SD 290 )
Maintain the application components first ( SD 291 )
Define the attributes first ( SD 292 )
Add a reference to the Implementation Guide ( SD 293 )
Set the attribute "Customizing parameter changes" ( SD 294 )
Select only one option ( SD 401 )
Make a selection ( SD 402 )
Technical writer & not found ( SD 403 )
Choose an object ( SD 404 )
Package & does not exist ( SD 405 )
Choose a date ( SD 407 )
Start date & is later than end date & ( SD 408 )
Saving is only possible with 'package' ( SD 410 )
Error saving statistics ( SD 412 )
Statistics values do not exist ( SD 415 )
No statistics exist for date & ( SD 416 )
No statistics exist for language & ( SD 417 )
Error deleting statistics language & and date & ( SD 419 )
Select one object only ( SD 420 )
No statistics available ( SD 421 )
Select an option ( SD 423 )
Product & does not exist ( SD 425 )
Component & & does not exist ( SD 426 )
Product not selected. Entry set to '*' ( SD 427 )
The list of possible entries is too long ( SD 502 )
No possible entries available for this field ( SD 503 )
Specify a path in the profile parameters eu/iwb* ( SD 510 )
Specify a server in the profile parameters eu/iwb* ( SD 511 )
Specify a help type in the profile parameters eu/iwb* ( SD 512 )
Specify the installed languages in the profile parameters eu/iwb* ( SD 513 )
Specify a valid help type in the profile parameters eu/iwb* ( SD 517 )
Help type & is not valid for the platform & ( SD 518 )
Specify a valid Netscape path in the transaction FILE ( SD 520 )
Save orginal unsuccessful ( SD 621 )
Document &2 of type &1 could not be changed in language &3. ( SD 622 )
Document &2 of type &1 does not exist in language &3 in the index. ( SD 623 )
Orginal document could not be in inserted in a request. ( SD 625 )
Object &1 is orginal in current system. ( SD 626 )
Error deleting the enhancement from the orginal document ( SD 627 )
Error inserting the enhancement into the orginal document ( SD 628 )
The document &1 already exists. ( SD 629 )
The names of the enhancements must be different. ( SD 630 )
The name of the second enhancement is not relevant. ( SD 632 )
Document &1 is itself an enhancement. ( SD 634 )
Document &1 (&2) is already being edited. ( SD 635 )
Edit reading the TADIR entry &1 &2 &3 ( SD 636 )
No enhancement was found for document &1 (&2). ( SD 637 )
The document &1 (&2) is already being edited. ( SD 638 )
You have no maintenance authorization for the document &1 (&2). ( SD 639 )
Document delete error ( SD 642 )
The original of the document has already been modified ( SD 643 )
The document has already been enhanced ( SD 644 )
Header & is missing ( SD 773 )
Release Note contains text and redirect link ( SD 782 )
Translations for object & were saved ( SD 807 )
Missing entries were not saved ( SD 809 )
Table & is not in ABAP Dictionary ( SD 812 )
Object & not found ( SD 832 )
Object cannot be accessed with this option ( SD 833 )
Object & does not have a long text ( SD 837 )
Object & does not have any exceptions ( SD 839 )
Table has no language indicator ( SD 841 )
No entries found in table & ( SD 844 )
This function is not allowed in your system ( SD 845 )
An invalid parameter was passed ( SD 848 )
Check translations again (length) ( SD 849 )
Requested status does not exist ( SD 851 )
Read error ( SD 852 )
Parameter was incorrectly filled ( SD 853 )
Table & is not to be translated. See table NOTRA ( SD 854 )
Enter a remark for object & ( SD 855 )
TSYST DEVTYPE does not exist (application, basis or customer system) ( SD 856 )
Migration texts cannot be translated in this system ( SD 858 )
You cannot translate into the master language & ( SD 859 )
No active short text exists ( SD 860 )
Generated BOR programs can only be edited in BOR ( SD 861 )
No values exist for domain & ( SD 863 )
Confirmation of translation not necessary or already made ( SD 869 )
Target lang. &1 not available in old trans. environment (see long text) ( SD 875 )
Target lang. &1 not available in new transl. environment (see long text) ( SD 876 )
Confirmation of translation not necessary or already made ( SD 877 )
Worklist already open ( SD 878 )
Reinstall program & & ( SD 999 )
Please adjust SMS definitions (ACS routines) ( SDB2U 011 )
Automatic Overwriting of Log Area ( SDBALM 044 )
Current status of the liveCache ( SDBALM 045 )
Current status of the SAP DB ( SDBALM 046 )
liveCache write-protected ( SDBALM 047 )
Last stop of the liveCache instance ( SDBALM 048 )
Time of the last restart ( SDBALM 049 )
Time of the last checkpoint ( SDBALM 050 )
Name of the liveCache instance ( SDBALM 051 )
Name of the SAP DB instance ( SDBALM 052 )
Name of the liveCache server ( SDBALM 053 )
Name of the SAP DB server ( SDBALM 054 )
Instance type ( SDBALM 055 )
Kernel version of the liveCache instance ( SDBALM 056 )
Kernel version of the SAP DB instance ( SDBALM 057 )
Version of the DBM Server ( SDBALM 058 )
Operating System ( SDBALM 059 )
liveCache error messages ( SDBALM 060 )
Error messages of the SAP DB database ( SDBALM 061 )
Error messages during liveCache operation ( SDBALM 062 )
Free space in data area in % ( SDBALM 063 )
Free memory in log area in % ( SDBALM 064 )
Log write ( SDBALM 065 )
Status of automatic log backup ( SDBALM 066 )
Last known log page number ( SDBALM 067 )
Last known log sequence number ( SDBALM 068 )
Usage of the data cache in % ( SDBALM 069 )
Usage of the data cache with OMS data in % ( SDBALM 070 )
Usage of the data cache with SQL data in % ( SDBALM 071 )
Usage of the data cache with history/undo data in % ( SDBALM 072 )
Usage of the data cache with OMS history data in % ( SDBALM 073 )
Usage of the data cache with OMS rollback data in % ( SDBALM 074 )
Number of "Out of Memory" exceptions since the last message ( SDBALM 075 )
Number of OMS terminations since the last measurement ( SDBALM 076 )
Usage of the heap in % ( SDBALM 077 )
Usage of the heap in KB ( SDBALM 078 )
Maximum usage of the heap in KB ( SDBALM 079 )
Size of the system heap in KB ( SDBALM 080 )
Setting of the parameter OMS_HEAP_LIMIT ( SDBALM 081 )
Hit rate of the data cache in % ( SDBALM 082 )
Hit rate for the OMS data in the data cache in % ( SDBALM 083 )
Hit rate for the SQL data in the data cache in % ( SDBALM 084 )
Hit rate for the history/undo data in the data cache (in %) ( SDBALM 085 )
Hit rate for the OMS history data in the data cache in % ( SDBALM 086 )
Hit rate for the OMS rollback data in the data cache in % ( SDBALM 087 )
Hit rate of the catalog cache in % ( SDBALM 088 )
Hit rate of the rollback cache in % ( SDBALM 089 )
Hit rate of the converter cache in % ( SDBALM 090 )
Number of user tasks in status "Connect Wait" ( SDBALM 091 )
Setting of the OMS memory analysis ( SDBALM 092 )
Age of the oldest OMS version in hours ( SDBALM 093 )
Database trace setting ( SDBALM 094 )
Number of log queue overflows since the last measurement ( SDBALM 095 )
Proportion of log queue overflows to log queue inserts (in %) ( SDBALM 096 )
Last update of optimizer statistics ( SDBALM 097 )
Type of last update of optimizer statistics ( SDBALM 098 )
Time of the last successful complete data backup ( SDBALM 099 )
Return code of the last full data backup ( SDBALM 100 )
Time of the last restore ( SDBALM 101 )
Number of defective database indexes ( SDBALM 102 )
Time of last successful database structure check ( SDBALM 103 )
Return code of last database structure check ( SDBALM 104 )
Type of last database structure check ( SDBALM 105 )
Status of the Database Analyzer ( SDBALM 106 )
Last logged Database Analyzer warning with high priority ( SDBALM 107 )
Database Analyzer log directory ( SDBALM 108 )
Database Analyzer configuration file ( SDBALM 109 )
Collection interval of the Database Analyzer in seconds ( SDBALM 110 )
Start time of the Database Analyzer ( SDBALM 111 )
Version of the kernel in internel notation (xxx.yyy.zzz.uuu) ( SDBALM 122 )
Instance type ( SDBALM 123 )
Cache accesses (total) - for calculation of the access hitrates ( SDBALM 124 )
Cache accesses (successful) - for calculation of the access hitrates ( SDBALM 125 )
Size of the data area (MB) ( SDBALM 126 )
Utilized data area (%) ( SDBALM 128 )
Free data area (MB) ( SDBALM 130 )
Size of the log area (MB) ( SDBALM 131 )
Utilized log area (%) ( SDBALM 133 )
Free log area (MB) ( SDBALM 135 )
Internal version ID of the liveCache/SAP DB alert monitoring ( SDBALM 141 )
Time of the last restart (time stamp) ( SDBALM 142 )
Time of the last check of the shutdown cause ( SDBALM 143 )
Number of log queue overflows (total) ( SDBALM 144 )
Number of log queue inserts (total) ( SDBALM 145 )
Number of "Out of Memory" exceptions (total) ( SDBALM 146 )
Number of OMS terminations (total) ( SDBALM 147 )
Server on which the data collection was started ( SDBALM 148 )
Connection using DBMRFC ( SDBALM 150 )
Connection using Native SQL ( SDBALM 151 )
Locked data collectors ( SDBALM 154 )
State of the data collection (active or inactive) ( SDBALM 155 )
Data collector A (highest runtime frequency) ( SDBALM 156 )
Data collector B (high runtime frequency) ( SDBALM 157 )
Data collector C (medium runtime frequency) ( SDBALM 158 )
Data collector D (low runtime frequency) ( SDBALM 159 )
Data collection through file access to: dban.prt ( SDBALM 160 )
Data collection through file access to: knldiag.err ( SDBALM 161 )
Data collection through file access to: lcinit.hist ( SDBALM 162 )
Data collector (currently has no function) ( SDBALM 163 )
APO system name ( SDBALM 302 )
Version of the APO system ( SDBALM 303 )
Version of the liveCache applications (DB procedures) ( SDBALM 304 )
Number of work processes ( SDBALM 305 )
Information about LCA connection ( SDBALM 307 )
Information about LDA connection ( SDBALM 308 )
Information about the program /SAPAPO/OM_REORG_DAILY ( SDBALM 310 )
Information about the program /SAPAPO/OM_DELETE_OLD_SIMSESS ( SDBALM 311 )
Information about the program /SAPAPO/DELETE_LC_ANCHORS ( SDBALM 312 )
Number of active liveCache application traces ( SDBALM 314 )
Number of active liveCache application checks ( SDBALM 315 )
Information about critical logging events ( SDBALM 317 )
Information about RFC connections relevant for APO ( SDBALM 318 )
Information about LEA connection ( SDBALM 320 )
Specifications for program SLCA_LCK_SYNCHOWNERS ( SDBALM 321 )
Database availability ( SDBALM 501 )
Growth in used memory area in MB since previous day ( SDBALM 504 )
Usage of data area between 00:00 and 02:00 ( SDBALM 607 )
Cluster & is being processed by the incremental table conversion ( SDBI_MSG 001 )
Cluster & is modified and inactive ( SDBI_MSG 002 )
RBAM check is either through ACL assoc. or through ACLROOT/ENTRY table ( SDCBO 153 )
Sales organization & does not exist ( SDCORE 095 )
Distribution channel &2 not permitted in sales organization &1 ( SDCORE 096 )
Division &2 is not permitted in sales organization &1 ( SDCORE 097 )
Division & does not exist ( SDCORE 098 )
Distribution channel & does not exist ( SDCORE 099 )
Sales office & does not exist ( SDCORE 110 )
Sales group & does not exist ( SDCORE 111 )
Sales area & & & does not exist ( SDCORE 115 )
SAP Script Analysis ( SDC_ANALYSIS_KIND 000 )
Document not Available ( SDC_ANALYSIS_KIND 100 )
Document Is not Active ( SDC_ANALYSIS_KIND 101 )
Technical Document Is not Active ( SDC_ANALYSIS_KIND 102 )
Document Has no Master Language ( SDC_ANALYSIS_KIND 103 )
Document Has no Content ( SDC_ANALYSIS_KIND 110 )
Content Is Malformed ( SDC_ANALYSIS_KIND 111 )
Content Is Inconsistent ( SDC_ANALYSIS_KIND 112 )
Content Is Inconsistent ( SDC_ANALYSIS_KIND 113 )
Not all checked transactions given "WebEnabling" attributed ( SDDC 009 )
The recommended length should be '&1' (based on text length '&2') ( SDDIC_ADT_DDLA 047 )
Syntax Check for CDS Metadata Extensions ( SDDIC_ADT_DDLX 000 )
Select list entry '&1' does not exist in '&2' ( SDDIC_ADT_DDLX 005 )
Parameter '&1' does not exist in '&2' ( SDDIC_ADT_DDLX 016 )
Element '&1' for '&2' not found ( SDDIC_ADT_DDLX 068 )
Association '&1' for '&2' not found ( SDDIC_ADT_DDLX 069 )
Key element '&1' for '&2' not found ( SDDIC_ADT_DDLX 070 )
Parameter '&1' for '&2' not found ( SDDIC_ADT_DDLX 071 )
Entity '&1' for '&2' not found ( SDDIC_ADT_DDLX 075 )
The column & is unknown ( SDDL_PARSER_MSG 010 )
The selection list must contain at least one client field ( SDDL_PARSER_MSG 011 )
Column &1 is not contained in the GROUP BY list ( SDDL_PARSER_MSG 024 )
GROUP BY must not contain any LOB columns ( SDDL_PARSER_MSG 029 )
UNION must not contain any LOB columns in the selection list ( SDDL_PARSER_MSG 030 )
Conditions must not contain any LOB columns ( SDDL_PARSER_MSG 031 )
Automatic client handling is not possible; see long text ( SDDL_PARSER_MSG 039 )
This element is not allowed in ON conditions in associations (class &) ( SDDL_PARSER_MSG 045 )
Field "&1" must be included together with "&2" in the selection list ( SDDL_PARSER_MSG 054 )
"To many" associations (cardinality [n..*]) are not allowed here ( SDDL_PARSER_MSG 057 )
The function & expects & parameters ( SDDL_PARSER_MSG 060 )
The association & cannot be used locally in the view (see long text) ( SDDL_PARSER_MSG 061 )
It is not possible to expand path element & ( SDDL_PARSER_MSG 063 )
The association & can modify the cardinality of the results set ( SDDL_PARSER_MSG 074 )
The name & does not conform with DDIC conventions ( SDDL_PARSER_MSG 078 )
The parameter & is not contained in the selection list of the entity ( SDDL_PARSER_MSG 085 )
Use of the association & can produce cyclical dependencies ( SDDL_PARSER_MSG 087 )
Use of various paths with quantity values in aggregate functions ( SDDL_PARSER_MSG 092 )
Either "WITH PARAMETERS" or "RETURNS" was expected here ( SDDL_PARSER_MSG 103 )
The keyword "PARAMETERS" was expected here ( SDDL_PARSER_MSG 104 )
A list of input parameters is expected after "WITH PARAMETERS" ( SDDL_PARSER_MSG 105 )
": <type name>" was expected instead of "&1" ( SDDL_PARSER_MSG 106 )
"RETURNS" must be followed by a parameter list in '{}' ( SDDL_PARSER_MSG 107 )
Return column has incorrect form or contains a reserved word ( SDDL_PARSER_MSG 108 )
The annotation "Environment.SystemField #CLIENT" is not allowed here ( SDDL_PARSER_MSG 113 )
The association & is not used ( SDDL_PARSER_MSG 114 )
The view & cannot be extended ( SDDL_PARSER_MSG 122 )
Union clauses in basis view & and extend & do not match ( SDDL_PARSER_MSG 123 )
Union: Association & is different in the selections ( SDDL_PARSER_MSG 126 )
Association &2 is not required for selection of the element &1 ( SDDL_PARSER_MSG 127 )
Inconsistent annotation for client handling ( SDDL_PARSER_MSG 130 )
Automatic client handling not possible ( SDDL_PARSER_MSG 131 )
"&" is an invalid parameter name or a reserved keyword ( SDDL_PARSER_MSG 134 )
Invalid value "&1" for annotation "ClientDependent" ( SDDL_PARSER_MSG 142 )
Invalid value "&1" for annotation "ClientHandling.Type" ( SDDL_PARSER_MSG 144 )
Optimization of Case expression and Join used is not possible. ( SDDL_PARSER_MSG 153 )
Annotation "@ClientHandling.type: #CLIENT_DEPENDENT" is required. ( SDDL_PARSER_MSG 156 )
No annotation "@Environment.systemField: #CLIENT" for client parameter ( SDDL_PARSER_MSG 157 )
Association on-condition for "&" not available in metadata; see long text ( SDDL_PARSER_MSG 165 )
Client field must be specified manually to avoid duplicates ( SDDL_PARSER_MSG 171 )
Released association "&1" is not used (see long text) ( SDDL_PARSER_MSG 174 )
The parent entity "&1" requires a unique key ( SDDL_PARSER_MSG 223 )
Composition entities cannot be the same ( SDDL_PARSER_MSG 228 )
Data source &1 is used in FROM clause or JOIN clause of the view ( SDDL_PARSER_MSG 232 )
The composition "&1" cannnot be published with attributes ( SDDL_PARSER_MSG 235 )
The type of the child entity "&1" is not supported in compositions ( SDDL_PARSER_MSG 239 )
The specified path expression can be replaced by "&1.&2" ( SDDL_PARSER_MSG 248 )
Invalid comparison in the ON condition of the composition definition ( SDDL_PARSER_MSG 249 )
Two target fields cannot be compared in the composition definition ( SDDL_PARSER_MSG 257 )
Error in Class Library; lock not possible ( SDEST 005 )
Value & for qRFC version is invalid ( SDEST 007 )
Value & for load check procedure in asynchronous RFC is invalid ( SDEST 008 )
Value & for communication method is invalid ( SDEST 009 )
Value & for start type of external program is invalid ( SDEST 010 )
Value & for forwarding of trace level to target system is invalid ( SDEST 012 )
Error when saving destination & to database ( SDEST 013 )
Update options for modifying destination are invalid ( SDEST 019 )
Password handling error in Class Library (error situation &1) ( SDEST 021 )
Value & for HTTP version is invalid ( SDEST 025 )
Value & for status of HTTP compression is invalid ( SDEST 026 )
Value & for status of HTTP compression of response is invalid ( SDEST 027 )
Value & for handling of cookies is invalid ( SDEST 028 )
You cannot edit a destination of category &2 ( SDEST 032 )
Internal error in class library (error sitation &) ( SDEST 033 )
Logon data inconsistent; user not unique ( SDEST 036 )
Logon data and logon procedure are inconsistent ( SDEST 037 )
Value & for system load analysis period is invalid ( SDEST 038 )
You cannot specify logon data for logon screen prompt ( SDEST 039 )
Could not switch to classic qRFC version ( SDEST 040 )
Value &1 for destination name is invalid (error situation &2) ( SDEST 041 )
Cannot use function module &2 for type &1 ( SDEST 042 )
Category &1 for destination &2 is invalid ( SDEST 043 )
Value & for logon procedure is invalid ( SDEST 044 )
Value &1 for basXML activation is invalid ( SDEST 046 )
Server name &2 ignored for method &1 when saving ( SDEST 048 )
Unprocessed units exist; no deletion possible ( SDEST 050 )
Cannot send SSO ticket ( SDEST 052 )
Password cannot be specified without user ( SDEST 053 )
Proxy password cannot be specified without proxy user ( SDEST 054 )
Logon data changed; specify a new password ( SDEST 055 )
Password is too long ( SDEST 057 )
Collect failed. &V3 server(s) not reached. See longtext. ( SDLP_UI 033 )
Dialog pool name &1 not allowed. Choose another name ( SDME_DDT 124 )
Only the header structure is required ( SDOE_BAPI_WIZ 015 )
Generation is not triggered because the key mapping is incomplete ( SDOE_BAPI_WIZ 042 )
Parent child relationship between nodes &1 and &2 is incomplete ( SDOE_ESD 029 )
Minimal set of fields not included in node &1 ( SDOE_ESD 030 )
Cannot copy package variant because copy constraints are not met ( SDOE_MDP_MSGS 082 )
Cannot add any data objects to this package variant ( SDOE_MDP_MSGS 086 )
Cannot schedule the step to run in the background ( SDOE_SETUP 027 )
Setup tool has detected an upgrade;for more information, see long text ( SDOE_SETUP 032 )
Others can now edit this object. You might lose changes you didn’t save. ( SDRAFT_COMMON 003 )
At the moment, we can't save or autosave this object. ( SDRAFT_COMMON 004 )
Editing for this object is disabled. Please try again later. ( SDRAFT_COMMON 007 )
Draft Lifecycle ( SDRAFT_LIFECYCLE 000 )
Object &1 not Draft enabled ( SDRAFT_LIFECYCLE 001 )
Unkown Expiry Event &1 ( SDRAFT_LIFECYCLE 104 )
More than one annotation exists for &1 ( SDRAFT_LIFECYCLE 105 )
Invalid Expiry Duration &1 for Event &2 ( SDRAFT_LIFECYCLE 108 )
Configuration for event &1 ignored ( SDRAFT_LIFECYCLE 109 )
Configuration &1 defined on Property Level ( SDRAFT_LIFECYCLE 110 )
Expiry Duration &1 for Event &2 is to short ( SDRAFT_LIFECYCLE 111 )
Program error (&1) ( SDRB 001 )
Select only one entry ( SDRB 002 )
The system cannot display object "&1 &2" ( SDRB 003 )
The system cannot display object "&1 &2 &3" ( SDRB 004 )
Default method called for object type "&1" ( SDRB 005 )
Temperature range for DRB reads ( SDRB 029 )
Setting was saved but is not used ( SDRB 032 )
Setting was saved but is not used ( SDRB 033 )
Setting was saved but is not supported by database ( SDRB 034 )
Setting was saved but is not supported by database ( SDRB 035 )
DRB started with object "&1 &2" ( SDRB 101 )
Determining adjacent same-level nodes to object "&1 &2" ( SDRB 102 )
The RFC destination for method &1 has been determined ( SDRB 103 )
The RFC destination for method &1 could not be determined ( SDRB 104 )
Display of object "&1 &2" requested ( SDRB 106 )
Display of object "&1 &2" ended ( SDRB 107 )
Formatting for object key "&1 &2" requested ( SDRB 108 )
Formatting for object key "&1 &2" ended ( SDRB 109 )
Determination of origin requested for object "&1 &2" ( SDRB 110 )
Determination of origin ended for object "&1 &2" ( SDRB 111 )
Determination of origin not possible for object type &1 ( SDRB 112 )
RFC error: &1&2&3 ( SDRB 113 )
&1&2&3 ( SDRB 114 )
Switch to secure mode (see long text) ( SDRB 115 )
Function module &1 does not exist ( SDRB 116 )
Program &1 contains syntax errors ( SDRB 117 )
&1 &2 &3 not found ( SDRB 118 )
Only current data is read ( SDRB 121 )
IDoc &1 not found ( SDRB 201 )
Work item &1 not found ( SDRB 202 )
& does not conform to DDIC or does not exist on DB (schemas &) ( SDRPLI 259 )
Unexpected status code &1 received (reason: &2) ( SDS_COMMON 000 )
Error &1 received (reason: &2) ( SDS_COMMON 001 )
Error with return code SY_SUBRC &1 while getting number range (aRFC ID) ( SDS_COMMON 003 )
Transformation of the download.xml failed ( SDS_COMMON 004 )
Do not externally set execution parameters ( SDS_COMMON 006 )
Cannot open file; exception &1 occurred ( SDS_COMMON 007 )
Entry for user &1 already exists in database table &2 ( SDS_COMMON 009 )
Entry for user &1 does not exist in database table &2 ( SDS_COMMON 010 )
Cannot create entries or changes; configuration is not locked ( SDS_COMMON 011 )
Cannot change or delete entry for user &1; it does not exist ( SDS_COMMON 013 )
Exception SYSTEM_FAILURE occurred during remote call ( SDS_COMMON 014 )
Exception COMMUNICATION_FAILURE occured during remote call ( SDS_COMMON 015 )
Cannot transport file data; download stopped ( SDS_COMMON 016 )
Cannot close file &1; download was stopped ( SDS_COMMON 017 )
Number of aRFC processes &1 is larger than the maximum value &2 ( SDS_COMMON 021 )
Unexpected error &1 during calculation of allowed aRFC processes ( SDS_COMMON 022 )
Value &1 for field 'Optimized Download' is not supported ( SDS_COMMON 023 )
Directory &1 does not exist or user has insufficient priv. to write files ( SDS_COMMON 024 )
HTTP client: send method failed with return code SY_SUBRC &1 ( SDS_COMMON 026 )
HTTP client: receive method failed with return code SY_SUBRC &1 ( SDS_COMMON 027 )
HTTP client: open method failed with return code SY_SUBRC &1 ( SDS_COMMON 028 )
HTTP client: close method failed with return code SY_SUBRC &1 ( SDS_COMMON 029 )
Entry for identifier &1 does not exist in DB table SDS_CNF_SUSER ( SDS_COMMON 030 )
File size has changed during download ( SDS_COMMON 031 )
File was modified during download ( SDS_COMMON 032 )
Cannot get file name for logical path &1 with message &2 ( SDS_COMMON 033 )
Cannot get file name with path for logical path &1 with message &2 ( SDS_COMMON 034 )
HTTP connection check was not executed ( SDS_COMMON 044 )
Cannot execute virus scan ( SDS_COMMON 045 )
Download XML does not contain any files ( SDS_COMMON 046 )
URL &1 does not match the supported patterns ( SDS_COMMON 047 )
Entered XML is invalid ( SDS_COMMON 049 )
Created a configuration entry for system default entry ( SDS_COMMON 050 )
Created a configuration entry for user &1 ( SDS_COMMON 051 )
Changed configuration entry for system default entry ( SDS_COMMON 052 )
Changed configuration entry for user &1 ( SDS_COMMON 053 )
Cannot determine free space for logical path &1; message &2 ( SDS_COMMON 056 )
Not enough free space on target directory ( SDS_COMMON 057 )
File name &1 in XML file does not match file name &2 in download URL ( SDS_COMMON 058 )
Not authorized to read configuration data ( SDS_COMMON 059 )
Authority check for function &1 activity &2 failed ( SDS_COMMON 060 )
File &1, line &2: Incorrect IDoc number ( SDX 210 )
File &1, line &2: Different parent segment numbers ( SDX 213 )
File &1, line &2: Hierarchy error ( SDX 214 )
File &1, line &2: missing mandatory segment ( SDX 215 )
File &1, line &2: Error in hierarchy assignment ( SDX 216 )
Line &2 of file &1 does not contain an IDoc control record ( SDX 222 )
Maximum number of errors in file &1 reached (see long text) ( SDX 225 )
File &1, line &2: incorrect segment number ( SDX 228 )
File &1, line &2: ( SDX 231 )
File &1, line &2: incorrect client ( SDX 241 )
File &1, line &2: incorrect system release ( SDX 242 )
File &1, line &2: incorrect direction ( SDX 243 )
File &1, line &2: incorrect receiver port ( SDX 244 )
File &1, line &2: incorrect test option ( SDX 245 )
Specify one file port ( SDX 400 )
Do not use a port with a dynamic file name ( SDX 401 )
Invalid output mode for port &3 ( SDX 402 )
Error in port definition; see the long text ( SDX 403 )
Input file &1: Session header number BGR00 not found ( SDX 530 )
File &1, line &2: unexpected segment length ( SDX 531 )
System &1: BF LOG_SD_ANALYTICS_01 cannot be activated, see message(s) &2 ( SD_ANLY 001 )
At least one Logistics application has open V3 update entries ( SD_ANLY 002 )
At least one Logistics application has open extraction queue entries ( SD_ANLY 003 )
At least one Logistics application has open setup table entries ( SD_ANLY 004 )
Logistics application 12 (Shipping) has open pre-buffer entries ( SD_ANLY 005 )
No customizing settings defined for trade finance risk control. ( SD_RM_LC 011 )
Pymt method &1 has no SEPA assignment; mandate reference will be deleted ( SD_SEPA 002 )
Payment term &1 has pymt method w/o SEPA assgmt; mandate will be deleted ( SD_SEPA 004 )
Payer changed; assigned mandate reference &1 has been deleted ( SD_SEPA 007 )
Combination of payment card and payment term not valid for SEPA ( SD_SEPA 012 )
Buffer table not up to date ( SE 001 )
Please select by either service number or service short text ( SE 004 )
Caution! Entry sheet & imported once already ( SE 008 )
No authorization to display entry sheet & ( SE 013 )
Not all entry sheets shown due to lack of authorizations ( SE 016 )
Not possible to cancel acceptance immediately due to aggregation ( SE 025 )
You cannot maintain service specs. due to incomplete transfer structure ( SE 026 )
Data could not be transmitted ( SE 028 )
Maintain services or limits ( SE 029 )
No authorization to transmit ( SE 030 )
You have no authorization to read mails ( SE 033 )
Informatory line in item &1 &2 is not supported in external system ( SE 035 )
Line with blank quantity in item &1 &2 not supported in external system ( SE 036 )
Basic line in item &1 &2 is not supported in external system ( SE 037 )
Alternative line in item &1 &2 is not supported in external system ( SE 038 )
Outlines without service lines are not supported in the external system ( SE 039 )
Please enter just one selection date ( SE 040 )
No time recording data available for this purchase order ( SE 041 )
Document & contains line types not supported by the catalog ( SE 043 )
Function can only be executed if taxes are active at service level ( SE 095 )
Specified service & does not exist ( SE 101 )
No entry sheets exist ( SE 109 )
Please enter an Internet address ( SE 112 )
Maintain services or limits (function not possible) ( SE 123 )
Service & may not be entered (no limit) ( SE 135 )
Service &: no limit amounting to & for unplanned services exists ( SE 136 )
Service &: no overall limit for unpl. services amounting to & exists ( SE 137 )
Unplanned service & may not be entered ( SE 147 )
Service &: quantity & exceeds quantity & in purchase order ( SE 149 )
Already effected releases cancelled ( SE 150 )
No authorization for release group & and release code & ( SE 153 )
Release with code & not possible ( SE 154 )
Not possible to cancel release with code & ( SE 155 )
Please enter points score between 1 and & ( SE 156 )
Acceptance of blocked entry sheets not allowed ( SE 157 )
Release of blocked entry sheets not allowed ( SE 158 )
Price must be greater than 0 ( SE 159 )
Please enter a valid release code ( SE 161 )
You have no authorization for release code & ( SE 162 )
Please enter a valid release group ( SE 163 )
Entry sheet & has in the meantime been changed (function not possible) ( SE 164 )
The entry sheets for PO no. & are already being processed ( SE 165 )
Not possible to block PO & ( SE 166 )
No authorization to accept entry sheet & ( SE 167 )
Error posting entry sheets ( SE 168 )
No suitable documents found ( SE 169 )
"Final entry" indicator already set ( SE 172 )
Not possible to block accepted documents ( SE 174 )
Blocking not possible (document in process of being accepted) ( SE 175 )
"Final entry" indicator has already been set in entry sheet & ( SE 176 )
"Final entry" indicator has not been set in entry sheet & ( SE 177 )
Please specify an account assignment category ( SE 178 )
Account assignment category 'U' not defined here ( SE 179 )
Specify account assignment ( SE 180 )
Please specify a valid account assignment ( SE 181 )
Entry must be within validity period of purchase order (& - &) ( SE 182 )
Chosen data incorrect ( SE 183 )
Error importing data ( SE 184 )
No data chosen ( SE 185 )
Adoption of planned services not possible ( SE 188 )
Please maintain a short text ( SE 189 )
Please enter account assignment category for this item category ( SE 191 )
Entry sheet with communication number & already exists ( SE 196 )
No provision for service entry for purchase order & & ( SE 198 )
No data found ( SE 205 )
Error initializing text ( SE 208 )
Error reading text ( SE 209 )
Error copying text ( SE 210 )
Service long text adopted in document ( SE 211 )
Prices can only be displayed for services ( SE 237 )
Please enter a currency for price display ( SE 238 )
Unit of measure of formula result & not convertible into & ( SE 250 )
Please enter a value for variable(s) & (&) ( SE 252 )
Entry sheet already deleted (not possible to copy) ( SE 258 )
"Final entry" indicator set ( SE 259 )
Service-based invoice verification not active ( SE 274 )
Please enter either a service number or a text ( SE 300 )
Specify a valid service type ( SE 313 )
Please enter a service (not possible to specify quantity alone) ( SE 315 )
Enter a price ( SE 316 )
Line number not unique or is outside the interval ( SE 317 )
External service number is not sufficient (Please enter internal number) ( SE 318 )
Please enter a quantity ( SE 319 )
Quantity must correspond to at least the already entered quantity $ ( SE 320 )
Service line $ does not exist in the purchase order ( SE 322 )
You cannot enter the unplanned service ( SE 323 )
Deletion not possible (outline level & contains services) ( SE 324 )
Different jurisdiction code & ( SE 329 )
Service type data reset ( SE 331 )
SSC item contains variable symbols (Please complete long text) ( SE 332 )
Please enter network number and operation number ( SE 334 )
Operation & & does not exist or does not include any services ( SE 336 )
Please enter a line number ( SE 337 )
Line number entered is outside the allowed interval ( SE 338 )
Please enter a maintenance order number and an operation number ( SE 339 )
Tax jurisdiction & of account assignment adopted in service line ( SE 340 )
PO item must have account assignment for invoicing plan ( SE 341 )
Specified line $ in contract does not exist ( SE 344 )
Please enter a line number within the outline level ( SE 345 )
Quantity entered $ exceeds target quantity $ in contract ( SE 346 )
Total value entered ($) exceeds target value in contract ($) ( SE 347 )
Please indicate to which basic line the alternative belongs ( SE 354 )
Line assignment only allowed in case of alternative line ( SE 357 )
Highest outline level cannot be changed here ( SE 359 )
Highest outline level may not be deleted ( SE 360 )
Line & can only be logically deleted ( SE 368 )
No services exist in reference document ( SE 374 )
Service & flagged for deletion ( SE 382 )
Value of specs. less than zero (function cannot be performed) ( SE 396 )
Value of account assignment & negative ( SE 397 )
Sum of values exceeds the allowed maximum value per service line ( SE 402 )
Negative total service value not allowed ( SE 405 )
Please enter model specifications number ( SE 414 )
Model service specifications & do not exist ( SE 415 )
Model specifications & contain no services ( SE 416 )
Usage of model service specifications & blocked ( SE 417 )
Not possible to delete basic line & (alternative line & exists) ( SE 437 )
Conditions for service price determination incomplete ( SE 477 )
No copyable service lines in reference document ( SE 479 )
Condition type GPRO not maintained in condition schema ( SE 498 )
Purchase order item is not a service item ( SE 501 )
No service items selected ( SE 506 )
Please specify purchase order or entry sheet ( SE 522 )
Not possible to enter services ("final entry" indicator set) ( SE 524 )
Service entry sheet saved, acceptance document & posted ( SE 526 )
The purchase order has not been released ( SE 529 )
Purchase order has different account assignment category ( SE 544 )
Acceptance document already exists for entry sheet ( SE 587 )
Requisition is closed or has different source of supply ( SE 588 )
Purchasing object & & does not exist or is not transmittable ( SE 610 )
Taxes are active at service level ( SE 629 )
Combination of GR/IR control not allowed for external services ( SE 650 )
Service-based invoice verif. requires GR "NO" or GR-based invoice verif. ( SE 655 )
Price change not allowed for this combination (see long text) ( SE 658 )
Cannot be deleted, as account assignment item contains posting ( SE 687 )
Combination of these line categories not allowed ( SE 691 )
Header conditions cannot be maintained without service specifications ( SE 730 )
New entries will not be taken into account when new prices are calculated ( SE 731 )
Reference invoicing plan not a Purchasing invoicing plan ( SE 751 )
Model service specs. & cannot be configured (no object dependencies) ( SE 758 )
No invoicing plan types defined ( SE 760 )
Invoicing plan type & does not exist ( SE 761 )
Item & has no invoicing plan ( SE 763 )
Invoicing plan function not possible in case of valuated good receipt ( SE 764 )
No automatic generation of invoice from invoicing plan dates ( SE 765 )
Invoicing plan not possible in case of GR-based invoice verification ( SE 766 )
Invoice cannot be created for item & ( SE 767 )
Final invoice indicator set for item & ( SE 768 )
Items with invoicing plan must have account assignment ( SE 769 )
No value-based commitments updating defined for unit of measure & ( SE 770 )
Sum of invoice values differs from item value ( SE 771 )
Sum of percentages is not 100% of item value ( SE 772 )
No invoicing plan possible if price determination date is GR date ( SE 777 )
In case of period inv. date, please use rule w. base date = inv. date ( SE 778 )
Invoicing rule & unsuitable for invoicing plan type ( SE 780 )
Date category &1 does not exist for invoicing plan type &2 ( SE 782 )
Invoicing plan type & does not exist ( SE 783 )
Define date category during maintenance of invoicing plan type ( SE 784 )
Change in acct. assignment has no effect on cumulative updating of costs ( SE 788 )
Not possible to determine a price for service & ( SE 789 )
Invoicing plan not allowed, as service lines exist with FAA indicator ( SE 795 )
Invoicing plan not allowed, as items exist with FAA indicator ( SE 796 )
Select the service lines for which you wish to change the values ( SE 812 )
Text contains formatting -> SAPscript editor ( SE 998 )
Method not allowed - Method is not allowed for this resource(Request-URI) ( SECATT_HTTP_STATUS 405 )
Not Acceptable ( SECATT_HTTP_STATUS 406 )
Proxy Authentication Required ( SECATT_HTTP_STATUS 407 )
Request Timeout ( SECATT_HTTP_STATUS 408 )
Request couldn't be completed (conflict with current state of ressource) ( SECATT_HTTP_STATUS 409 )
Gone - The requested resource is no longer available at the server ( SECATT_HTTP_STATUS 410 )
The server refuses to accept the request without a defined Content-Length ( SECATT_HTTP_STATUS 411 )
Precondition Failed ( SECATT_HTTP_STATUS 412 )
Request Entity Too Large ( SECATT_HTTP_STATUS 413 )
Request-URI Too Long ( SECATT_HTTP_STATUS 414 )
Unsupported Media Type ( SECATT_HTTP_STATUS 415 )
Requested Range Not Satisfiable ( SECATT_HTTP_STATUS 416 )
Expectation Failed ( SECATT_HTTP_STATUS 417 )
HTTP 500-Internal Server Error ( SECATT_HTTP_STATUS 500 )
HTTP 501-Not Implemented ( SECATT_HTTP_STATUS 501 )
HTTP 502-Bad Gateway ( SECATT_HTTP_STATUS 502 )
HTTP 503-Service Unavailable ( SECATT_HTTP_STATUS 503 )
HTTP 504-Gateway Timeout ( SECATT_HTTP_STATUS 504 )
HTTP 505-HTTP Version Not Supported ( SECATT_HTTP_STATUS 505 )
Kernel parameters saved ( SECAUDIT 044 )
Kernel parameters deleted ( SECAUDIT 045 )
File name template does not contain the patter '++++++++' ( SECAUDIT 046 )
File name template does not contain the pattern '######' ( SECAUDIT 047 )
File name template contains the pattern '######' before '++++++++' ( SECAUDIT 048 )
Security Audit Log events ( SECAUDIT 050 )
Control for dialog logons ( SECAUDIT 051 )
Auditing of RFC logons ( SECAUDIT 052 )
Control of transaction starts ( SECAUDIT 053 )
Control of RFC calls ( SECAUDIT 054 )
Control of user master record changes ( SECAUDIT 055 )
Control of other events ( SECAUDIT 056 )
Interface for SAP Enterprise Threat Detection only ( SECM 010 )
Internal error occurred ( SECSTORE 014 )
Access denied ( SECSTORE 015 )
You are not authorized to administer the secure storage ( SECSTORE 016 )
Internal error in secure store ( SECSTORE 021 )
Invalid input data for secure store ( SECSTORE 022 )
Cannot find entry &1 in secure store ( SECSTORE 023 )
Entry &1 already exists in secure store ( SECSTORE 024 )
Inconsistent administration data for the secure store ( SECSTORE 025 )
Access to entry &1 in the secure storage denied ( SECSTORE 026 )
Memory shortage when using the secure store ( SECSTORE 027 )
Database error while using the secure store ( SECSTORE 028 )
Incorrect key for entry &1 ( SECSTORE 029 )
Incorrect global key for entry &1 ( SECSTORE 030 )
System-dependent data for entry &1 changed: &2 / &3 ( SECSTORE 031 )
Secure storage cannot be used (no license exists) ( SECSTORE 032 )
Entry &1 is not in the registered namespace ( SECSTORE 033 )
Input data for entry &1 is too long for the secure storage ( SECSTORE 034 )
Cannot read global key (see long text) ( SECSTORE 035 )
Conversion error for the data of entry &1 ( SECSTORE 036 )
Missing or unsuitable migration key for entry &1 ( SECSTORE 037 )
BAdI implementation &1 registering an empty namespace ( SECSTORE 038 )
Nested namespace registration for prefix &1 ( SECSTORE 039 )
This entry does not support navigation to maintenance application ( SECSTORE 041 )
You can delete this entry ( SECSTORE 047 )
Access control entries are incomplete ( SECSTORE 048 )
Generated key: &1 ( SECSTORE 051 )
Changing the key: see the notes in the long text of this message ( SECSTORE 052 )
The quality of the pass phrase is not sufficient ( SECSTORE 054 )
Unspecified application error ( SECSTORE 056 )
Entry required by application "&1" is missing in the secure storage ( SECSTORE 057 )
Application "&1" passed a prefix with errors ( SECSTORE 058 )
Restricted check function in the case of selection by identifier ( SECSTORE 065 )
Entry "&1" will be deleted (see long text) ( SECSTORE 070 )
Entered characters of key are incorrect ( SECSTORE 080 )
Last change to file system is more recent than buffer time (&1 s <= &2 s) ( SECSTORE 082 )
Cannot access server "&1": &2&3&4 ( SECSTORE 087 )
Server "&1" cannot see key "&2" ( SECSTORE 088 )
Key "&1" for entry "&2" is missing in the secure storage in the file sys. ( SECSTORE 089 )
Entry "&1" cannot be decrypted with key "&2" ( SECSTORE 090 )
Server "&1" is not "Active" ( SECSTORE 091 )
No inconsistencies found ( SECSTORE 100 )
Entry &1 does not have an entry in the LDAP system user maintenance ( SECSTORE 101 )
Entry &1 cannot be read by function group SLDAP ( SECSTORE 102 )
Access control entry &1/&2 does not have an entry in the secure storage ( SECSTORE 103 )
Entry &1 in client &2 does not have an access control entry ( SECSTORE 105 )
Key value has unknown key type ( SECSTORE_FS 001 )
Key value has incorrect length for the declared key type ( SECSTORE_FS 002 )
Key value has incorrect checksum for the encryption key ( SECSTORE_FS 003 )
Key value has incorrect checksum for the declared key identifier ( SECSTORE_FS 004 )
&1 superfluous entries were selected ( SECURITY_POLICY 009 )
Value of security policy attribute &1 is the same as default value &2 ( SECURITY_POLICY 010 )
Changes were not saved ( SECURITY_POLICY 011 )
Invalid value combination; required password length (&1) > &2 ( SECURITY_POLICY 012 )
No LOB handle structure can be defined for table & ( SEDD_DER 002 )
No LOB handle structure is defined for view & ( SEDD_DER 003 )
Cals is in Display mode. Obj ref. not transferred ( SEDISSUB 001 )
Please switch to Change mode to execute e-Discoveries ( SEDISSUB 002 )
Enhancement spot &1 defines enhancement spot in another object ( SEDI_ENH 004 )
Enhancement implementation &1 does not have to be compared/adjusted ( SEEF_ADJUSTMENT 003 )
Enhancement implementation &1 cannot be compared/adjusted automatically ( SEEF_ADJUSTMENT 004 )
Check whether enhancement implementation &1 is causing the syntax error ( SEEF_ADJUSTMENT 102 )
Class &1 cannot be used as an implementing class ( SEEF_ADJUSTMENT 201 )
Filter types were adjusted; adjust the filter values too ( SEEF_ADJUSTMENT 202 )
Scan of resource failed ( SEEF_ADT_HOOK 001 )
Enhancement spot is not empty ( SEEF_BADI 001 )
A screen enhancement for BAdI &1 already exists ( SEEF_BADI 005 )
Critical change ( SEEF_BADI 006 )
Changing the interface for BAdI &1 is dangerous ( SEEF_BADI 014 )
Class &1 does not implement interface &2 ( SEEF_BADI 015 )
BAdI &1 has dependent objects ( SEEF_BADI 021 )
Interface &1 does not include interface IF_BADI_INTERFACE. ( SEEF_BADI 028 )
Name of BAdI definition is invalid ( SEEF_BADI 034 )
BAdI &1 contains menu enhancements ( SEEF_BADI 041 )
Screen enhancements only possible for BAdIs with simple implementation ( SEEF_BADI 043 )
Menu enhancements only possible for BAdIs with simple implementation ( SEEF_BADI 044 )
Input of filter value without relational operator not useful ( SEEF_BADI 045 )
Call of form interpreter was generated in method &1. ( SEEF_BADI 048 )
Implementation &1 will be migrated (see long text for instructions) ( SEEF_BADI 049 )
BAdI migrated in full; change implementation enhancement & instead ( SEEF_BADI 050 )
Use transaction SPAU to migrate BAdI implementation &1 ( SEEF_BADI 051 )
OR operation not possible ( SEEF_BADI 053 )
AND operation not possible ( SEEF_BADI 054 )
Combination of &1, &2, and comparator &3 not useful ( SEEF_BADI 058 )
Filter name &1 is invalid ( SEEF_BADI 072 )
Interface must be specified in BAdI definition ( SEEF_BADI 073 )
Class missing for BAdI implementation &1 ( SEEF_BADI 074 )
An implementation exists for BAdI &1 ( SEEF_BADI 075 )
Interface IF_FILTER_CHECK_AND_F4 is not implemented in class &1 ( SEEF_BADI 080 )
Menu enhancements exist for BAdI &1 ( SEEF_BADI 082 )
First choose a program for the subscreen ( SEEF_BADI 085 )
First choose a valid BAdI in the tree ( SEEF_BADI 086 )
For BAdI &1, context set to "Not Context-Dependent" ( SEEF_BADI 087 )
Context settings for BAdI &1 cannot be changed ( SEEF_BADI 088 )
Class &1 is abstract ( SEEF_BADI 089 )
Interface &2 cannot be used (see long text) ( SEEF_BADI 090 )
Lock error for BAdI &1 ( SEEF_BADI 093 )
BAdI &1 is an internal BAdI (see long text) ( SEEF_BADI 094 )
BAdI &1 already exists ( SEEF_BADI 096 )
BAdI definition &1 does not contain an interface yet ( SEEF_BADI 097 )
Invalid context settings for BAdI &1 due to screen enhancements ( SEEF_BADI 098 )
BAdI &1 migrated: Changing not permitted ( SEEF_BADI 099 )
Changing context settings of BAdI &1 ( SEEF_BADI 101 )
BAdI implementation &1 must still be migrated ( SEEF_BADI 103 )
Namespace conflict (see long text) ( SEEF_BADI 104 )
Define an interface first ( SEEF_BADI 113 )
Enclosing literal characters '...' or `...` are superfluous ( SEEF_BADI 118 )
Changing a filter for BAdI &1 is dangerous ( SEEF_BADI 121 )
String filter value contains significant trailing blanks: &1 ( SEEF_BADI 125 )
BAdI &1: Limited filter use collides with filter number ( SEEF_BADI 128 )
Selected layer is invalid ( SEEF_BADI 129 )
Select one filter only (limited filter use) ( SEEF_BADI 130 )
AND link not allowed (limited filter usage) ( SEEF_BADI 131 )
Filter combination required (limited filter use) ( SEEF_BADI 132 )
Comparator is invalid (limited filter use) ( SEEF_BADI 133 )
Creation of classic BAdIs no longer supported (see long text) ( SEEF_BADI 150 )
Use transaction SPAU to migrate CMOD implementation &1 ( SEEF_BADI 151 )
CMOD &1 for SMOD &2 has yet to be migrated ( SEEF_BADI 152 )
BAdI & is referenced in IMG. Check IMG and adapt if necessary ( SEEF_BADI 160 )
Implementation & is referenced in IMG. Adapt IMG accordingly ( SEEF_BADI 161 )
A customer implementation cannot be migrated to an SAP implementation ( SEEF_BADI 162 )
"Switch Off Default Menu Enhancement" not possible ( SEEF_BADI 170 )
Implementation specifications for menu enhancement will be deleted ( SEEF_BADI 171 )
Implementation will be created as SAP preliminary object ( SEEF_BADI 175 )
BAdI is internal SAP; implementation in customer namespace not allowed ( SEEF_BADI 176 )
Choose a class that is not declared as "final" ( SEEF_BADI 181 )
Class &1 is an Exit Handler class; this is not allowed ( SEEF_BADI 316 )
Copying enhancement spots is not supported ( SEEF_BASE 030 )
Subordinate objects for enhancement implementation &1 exist ( SEEF_BASE 044 )
Subordinate objects for enhancement spot &1 exist ( SEEF_BASE 045 )
Enhancement implementation &1 is locked ( SEEF_BASE 048 )
New assignment is not possible ( SEEF_BASE 053 )
Composite enhancement spot &1 has an inactive version ( SEEF_BASE 062 )
Table &1: Select a line and fill the required fields &2 ( SEEF_BASE 071 )
Transaction SPAU_ENH for adjusting enhancement implementations ( SEEF_BASE 094 )
Enhancement spot &1 cannot be renamed because enh.impl. exists ( SEEF_BASE 106 )
Enhancement implementations cannot be created on their own ( SEEF_BASE 114 )
Enhancement spot &1 is inactive; activate it ( SEEF_BASE 120 )
Object &1 &2 is inactive. Activate it. ( SEEF_BASE 121 )
Enhancement implementation &1 must still be adjusted ( SEEF_BASE 123 )
Contract for &1 cannot be created; error in &2 &3 ( SEEF_BASE 125 )
Function call through RFC connection &1 not successful &3 ( SEEF_BASE 146 )
Function call through RFC connection &1 not successful &3 ( SEEF_BASE 149 )
Inconsistency between Table GBADI_IMPL and GTADIR ( SEEF_BASE 150 )
Repair/Check only possible for active, enhanced objects ( SEEF_BASE 154 )
Enhancement spot &1 contains migrated BAdI; renaming not possible ( SEEF_BASE 157 )
BAdI &1 is used in the IMG; adjust IMG after migration ( SEEF_BASE 160 )
Deletion of enhancement spot &1 not possible due to enhancement options ( SEEF_BASE 171 )
Enhancement spot &1 contains migrated BAdI; deletion not possible ( SEEF_BASE 173 )
&1: Conflict determination for new behavior of POST-exits has failed ( SEEF_BASE 192 )
Cannot compare the two selected lines ( SEEF_BASE 204 )
It was not possible to perform the correction ( SEEF_BASE 214 )
Syntax check only possible for saved version of &1 ( SEEF_BASE 215 )
An inactive version exists for object &1 ( SEEF_BASE 216 )
Dependent enhancement objects must still be adjusted ( SEEF_BASE 250 )
Not possible to determine main program for enhancement implementation &1 ( SEEF_BASE 252 )
Operation &1 cannot be executed ( SEEF_BASE 253 )
Enhancement object &1 inconsistent (n version exists) ( SEEF_BASE 310 )
Enh. methods cannot be enhanced with pre/post/overwrite exits ( SEEF_BASE 551 )
Enh. methods cannot be enhanced with parameters of other enhancements ( SEEF_BASE 552 )
Enh. results cannot be enhanced with parameters of other enhancements ( SEEF_BASE 553 )
Use transaction SE20 for changes ( SEEF_BASE 625 )
Enhancement implementation cannot be created using transaction SE20 ( SEEF_BASE 626 )
BAdI definition cannot be created using transaction SE20 ( SEEF_BASE 627 )
Error with specific AFTER_IMPORT of enh. object &1 ( SEEF_BASE 810 )
Enhancement spot is not empty ( SEEF_HOOK 001 )
Error during scan of program &1 ( SEEF_HOOK 103 )
Top segment of a code page must be of sequence type ( SEG 016 )
The Segment Selection Contains a Mix of Include and Exclude ( SEG 020 )
Code page type could not be determined (rc = &) ( SEG 028 )
Unknown code page type (&) ( SEG 029 )
Error during database access (rc = &) ( SEG 030 )
Maximum number of selection options (&1) already reached ( SELTOOL 723 )
Selection list box number &1 already has a standard value ( SELTOOL 724 )
Enter position numbers within the interval from 1 to &1 ( SELTOOL 725 )
Choose a selection criteria using the entry help ( SELTOOL 726 )
Incorrect settings in system tables - inform SAP ( SELTOOL 727 )
Incorrect Customizing in table TAIF10 - make needed entries ( SELTOOL 728 )
Incorrect settings in system table - contact SAP ( SELTOOL 729 )
No data element name is defined for table field &1 - &2 ( SELTOOL 730 )
Select logical component from dependent product instances as well ( SEL_COMP 000 )
Component from a dependent product instance: & has to be selected ( SEL_COMP 001 )
Select at least one entry ( SEL_COMP 002 )
Highest product version set as initial value ( SEL_COMP 005 )
The product version change can cause incompatibilities ( SEL_COMP 008 )
Only one logical component can be edited ( SEL_COMP 010 )
The logical component & is still being used ( SEL_COMP 011 )
Logical components & and & have the same system &. ( SEL_COMP 016 )
Internal error: invalid parameter & ( SEMC 001 )
The interface does not support object type & ( SEMC 002 )
Internal error: delete modification parenthesis ( SEMC 006 )
Operation not allowed in Modification Assistant for element &1 of type &2 ( SEMC 007 )
Element &1 of type &2 does not exist in element list for dynpro ( SEMC 008 )
Element &1 of type &2 already exists in element list for dynpro ( SEMC 009 )
The function group & does not exist; you cannot create it here ( SEMC 010 )
This class exists in the old structure. Conversion not possible ( SEMC 012 )
Data for company code '&1' was applied for the mandate recipient ( SEPA 050 )
You cannot execute contradictory update requests ( SEPA 101 )
Mandate &1 &2 exists in active applications other than &3 ( SEPA 147 )
Mandate &1 &2 is in more than one active application ( SEPA 148 )
Mandate &1 already exists ( SEPA 153 )
Bank &1 &2 (SWIFT code &3) does not support SEPA B2B direct debits ( SEPA 193 )
Mandates &1 have been changed by another process in the meantime ( SEPA 203 )
Mandates &1 have been deleted by another process in the meantime ( SEPA 204 )
No field is permitted for mass change for application &1 ( SEPA 208 )
Specify sufficient selection criteria ( SEPA 220 )
The selection result has been limited to the maximum number of hits ( SEPA 305 )
You have not entered the data for limits (payee) completely ( SEPA_CI_LIMIT 001 )
Start date &1 for period unit &2 not allowed ( SEPA_CI_LIMIT 003 )
Cannot change status of mandate &1 from &2 to &3. ( SEPA_EN 001 )
Cannot change status from &1 to &2. ( SEPA_EN 003 )
Cannot create mandate with status &1. ( SEPA_EN 007 )
Poisson distribution (Lambda='&1') exceeds ABAP decimal value range ( SEPMH_DG 022 )
Attribute rule for &1-&2 is no valid value listener ( SEPMH_DG 038 )
Category &1 does not exist ( SEPMRA_PRODUCT 121 )
A new review has been added for &1 ( SEPMRA_PRODUCT 301 )
&1 reviews have been updated ( SEPMRA_PRODUCT 306 )
A system failure occured during a locking operation ( SEPM_TEST 209 )
The specification of a test session id is required ( SEPM_TEST 217 )
This is a test message with 4 parameters: P1=&1, P2=&2, P3=&3, P4=&4 ( SEPM_TEST 990 )
Documentation for Product Assignment ( SEP_BIZC 000 )
System assignment cannot be made - wizard will terminate ( SEP_BIZC 050 )
System information not completely available - selection corrected ( SEP_BIZC 052 )
Information about preconfiguration ( SEP_BIZC 100 )
This is a test message with param &1,&2 and longtext -> DO NOT TRANSLATE! ( SESFTS 022 )
Data requested = &1. OUT_DATA: &2 records. OUT_NODE_IDS: &3 records. ( SESF_CCF000 050 )
The PARENT_NODE_ID field was not filled. Query &1, NodeID: &2 ( SESF_CCF000 053 )
Query &1 performed on invalid node &2 ( SESF_CCF000 054 )
Sum of failed keys and no of out records is not equal to the input keys ( SESF_CCF000 100 )
The PARENT_NODE_ID field was not filled. NodeID: &1 ( SESF_CCF000 101 )
Sync notifications raised for read only edit mode. ( SESF_CCF000 102 )
Retrieve called on invalid node &1 ( SESF_CCF000 103 )
The &1 field is blank for the CREATE call. Node: &2, NodeID handle: &3 ( SESF_CCF000 150 )
The temporary key handle is blank for the CREATE call. Node: &1 ( SESF_CCF000 151 )
Changed attribute &1 is not part of Node &2. NodeID: &3 ( SESF_CCF000 152 )
Neither success nor failed create notification raised. NodeID handle: &1 ( SESF_CCF000 153 )
Modification was sent for invalid BO Node &1, NodeID: &2 ( SESF_CCF000 154 )
The PARENT_NODE_ID field was not filled. Association: &1, NodeID: &2 ( SESF_CCF000 200 )
Data table is populated even when data is not requested. Association: &1 ( SESF_CCF000 201 )
No. of out records <> distinct target keys in OUT_LINKS. Association: &1 ( SESF_CCF000 202 )
Sync notifications raised for read only edit mode. ( SESF_CCF000 203 )
Association &1 triggered on an invalid node &2 ( SESF_CCF000 204 )
Invalid Action name: &1 ( SESF_CCF000 250 )
Number of source keys = &1, entries in OUT_FAILED = &2, target keys = &3 ( SESF_CCF000 300 )
Number of entries in IN_NODE_ID_HANDLES:&1, records in OUT_DATA:&2. ( SESF_CCF000 350 )
LDU Violation: BO &1 with no LDU assignment accessed BO &2 with LDU &3 ( SESF_CCF000 850 )
LDU Violation: BO &1, LDU &4 accessed BO &2, LDU &3. ( SESF_CCF000 851 )
LDU Violation (Extended check): BO &1, LDU '&4' accessed BO &2, LDU '&3' ( SESF_CCF000 852 )
Query &1 returned a NodeID, not part of the filtered NodeIDs. NodeID: &2 ( SESF_CCF001 050 )
Query &1 fetched more records than requested. Requested: &2, Fetched: &3 ( SESF_CCF001 052 )
Query &1 returned duplicate result set. ( SESF_CCF001 053 )
Mismatch found between keys in data table/failed keys and input keys. &1 ( SESF_CCF001 100 )
Valueset retrieval for attribute &1 fetched &2 records, requested &3. ( SESF_CCF001 200 )
Valueset retrieval for action &1 fetched &2 records, requested &3. ( SESF_CCF001 201 )
Valueset retrieval for query &1 fetched &2 records, requested &3. ( SESF_CCF001 202 )
Message ID &1 of severity ERROR has no symptom assigned to it. ( SESF_CCF001 850 )
Message ID &1 was raised with no severity assigned. ( SESF_CCF001 851 )
Boolean field &1 contains illegal value: &2. Query: &4, NodeID: &3 ( SESF_CCF002 051 )
DateTime field &1 contains illegal value: &2. Query: &4, NodeID: &3 ( SESF_CCF002 052 )
Language field &1 contains illegal value: &2. Query: &4, NodeID: &3 ( SESF_CCF002 053 )
Date field &1 contains illegal value: &2. Query: &4, NodeID: &3 ( SESF_CCF002 054 )
Time field &1 contains illegal value: &2. Query: &4, NodeID: &3 ( SESF_CCF002 055 )
Boolean field &1 contains illegal value: &2. NodeID: &3 ( SESF_CCF002 101 )
DateTime field &1 contains illegal value: &2. NodeID: &3 ( SESF_CCF002 102 )
Language field &1 contains illegal value: &2. NodeID: &3 ( SESF_CCF002 103 )
Date field &1 contains illegal value: &2. NodeID: &3 ( SESF_CCF002 104 )
Time field &1 contains illegal value: &2. NodeID: &3 ( SESF_CCF002 105 )
Association &1 returned &2 record(s), cardinality allows &3. NodeID: &4. ( SESF_CCF002 200 )
Source-target link table contains unrequested NodeID: &1. Association: &2 ( SESF_CCF002 201 )
Boolean field &1 contains illegal value: &2. Association: &4, NodeID: &3 ( SESF_CCF002 202 )
DateTime field &1 contains illegal value: &2. Association: &4, NodeID: &3 ( SESF_CCF002 203 )
Language field &1 contains illegal value: &2. Association: &4, NodeID: &3 ( SESF_CCF002 204 )
Date field &1 contains illegal value: &2. Association: &4, NodeID: &3 ( SESF_CCF002 205 )
Time field &1 contains illegal value: &2. Association: &4, NodeID: &3 ( SESF_CCF002 206 )
&1 NodeIDs passed for action of cardinality &2. Action: &3 ( SESF_CCF002 250 )
Property &1 raised for non existing attribute &2. Node ID: &3. ( SESF_CCF002 300 )
A Service Provider does not respond to a node element create request ( SESF_CLIENT_API 109 )
RETRIEVE in read-only mode delivers notifications ( SESF_CLIENT_API 110 )
RETRIEVE_BY_ASSOCIATION in read-only mode delivers notifications ( SESF_CLIENT_API 111 )
Query returns inconsistent data ( SESF_CLIENT_API 112 )
&1 Uncaught serivce provider exceptions occured for business object &2. ( SESF_HEALTH_CHECK 020 )
Modification of auto-generated Service Definition not allowed here ( SESI_EDITOR 003 )
No Service Definition found for Interface &1. ( SESI_EDITOR 029 )
More than one autogenerated Service Definitions found for Proxy &1 ! ( SESI_EDITOR 052 )
A Service Definition has been found for a non P2P-enabled Proxy. ( SESI_EDITOR 053 )
Missing data in Table VEPCROSSREF for Service Definition &1 of Proxy &2. ( SESI_EDITOR 057 )
No &1 available, - may be not yet all used objects loaded. ( SESI_EDITOR 059 )
&1 is inconsistent, configuration cannot be displayed ( SESI_EDITOR 064 )
Failed to reset session &1 of type &2. Language settings not changed ( SESS_LANG 006 )
Sets with same name exist in another hierarchy ( SETHIER 000 )
Always specify the object and object type together ( SEUDEPENDENCY 012 )
Include &1 is used in multiple programs. Aktivate this object via JavaGUI ( SEU_ADT 001 )
Internal Error (See Long Text) ( SEU_MANAGER 016 )
An attempt was made to create a second instance of the Workbench Manager ( SEU_MANAGER 017 )
A second instance of the Workbench Manager is created ( SEU_MANAGER 018 )
Action is not supported here; use ADT ( SEU_MANAGER 031 )
Email text with &V1& &V2& &V3& ( SE_PTRM_ESA 000 )
Enter operator ( SF 003 )
Check entry (the logical link is not available) ( SF 004 )
Check entry ( SF 005 )
"&" is a negative word ( SF 015 )
Search term only contains invalid special characters ( SF 018 )
Object & is unknown ( SF 020 )
Text ID & is unknown ( SF 021 )
Your user data is incomplete in the user management ( SF 034 )
You are not authorized to approve Release Notes ( SF 035 )
Caution: this release note must be approved ( SF 036 )
The reporting tree & does not exist in this client. ( SF 099 )
No statutory change Release Infos found ( SF 125 )
No menu version from the previous release ( SF 139 )
Position on an executable object in the menu tree ( SF 147 )
Only a sequential search is possible ( SF 200 )
Only searches by class & are possible in the current repository ( SF 201 )
A sequential search is started when you press Enter ( SF 202 )
Undefined attributes have occurred (information class was changed) ( SF 203 )
When you press Enter, multiple folders may be searched sequentially ( SF 205 )
Create new projects with the modeling tool ( SF 239 )
Links can only be created for transactions ( SF 249 )
The program was not executed (do not forget the order) ( SF 255 )
Error in status & ( SF 256 )
Node title only found in German ( SF 278 )
No authorization to add transaction &1 to the role menu ( SF 285 )
The transaction & is not in the active enterprise menu ( SF 286 )
The documentation for this project was not activated ( SF 291 )
Enter a Person Responsible ID ( SF 292 )
Enter an object type ( SF 293 )
Regenerate project & IMG first ( SF 309 )
Target structure already exists in another language ( SF 325 )
Generate a display version of structure & ( SF 326 )
You cannot delete structure & ( SF 327 )
Deletion of structure & was canceled ( SF 328 )
You are not authorized to delete this structure ( SF 329 )
Structure with the specified keys does not exist ( SF 331 )
Structure is not contained in table DSYDS ( SF 332 )
Enter an existing structure as source structure ( SF 333 )
Enter a new structure as target structure ( SF 334 )
Get authorization to edit the structures ( SF 335 )
Only maintain customer structures in a customer system ( SF 336 )
Maintain only SAP structures in an SAP system ( SF 337 )
Select a structure name that does not start with "Y" or "Z" ( SF 338 )
Choose a structure name that starts with "Y" or "Z" ( SF 339 )
This structure is blocked by correction & ( SF 340 )
The original of this structure is in another system (&). ( SF 341 )
A document of class & cannot be maintained ( SF 342 )
The document is not used in any structure ( SF 345 )
No document exists for this structure title ( SF 346 )
Insert the enhancement as a subnode ( SF 347 )
A document from class & cannot be printed ( SF 348 )
Enter the 'From' Release ( SF 349 )

Length: 705909 Date: 20191022 Time: 012817

Count: 2752     sap01-206 ( 2859 ms ) This documentation is copyright by SAP AG.

Our Service

Looking for Support? Questions?

The

Consolut

Callback-Service

Leave us your contact details and we will call you back. Panels marked with * are mandatory.