Messages

Complete Message Docu Documentation From W#454 up to WO330

This documentation is copyright by SAP AG.
Count: 3467 Skipped: 6
Message Docu
Description
No further values could be selected ( W# 456 )
Total of recipient items does not equal material quantity ( W# 457 )
Recipient &1 was not included in original selection ( W# 458 )
Total quantities for each processing method not same as total quantity ( W# 459 )
Quantity exceeds/falls short of maximum qty of &1 &2 to be distributed ( W# 461 )
Distribution order generation was (partially) unsuccessful ( W# 463 )
Messages generated when distribution orders were generated ( W# 464 )
Error in storage location determination for plant &1, material &2 (&4) ( W# 466 )
Storage location &1 does not use Lean WM ( W# 467 )
No FRM movement type was specified for warehouse &1 ( W# 468 )
Picking location type not specified for combination &1/&2 ( W# 470 )
"To" storage type not defined for WM movement type &1 in warehouse &2 ( W# 471 )
Error generating distribution orders (return code &1) ( W# 472 )
System cannot lock documents &1, item &2 and &3, item &4 ( W# 473 )
Documents &1 and &2 are currently locked for processing ( W# 474 )
Distribution quantity of material &1 reduced for recipient &2 ( W# 475 )
At least one material could not be blocked ( W# 476 )
At least one material could not be blocked ( W# 477 )
At least one material could not be blocked ( W# 478 )
Error determining quantities in open distribution orders ( W# 479 )
Collective PO cannot be generated due to locking problem ( W# 481 )
No data exists for generation of distribution orders ( W# 483 )
Relevant distribution data already being processed by user &1 ( W# 484 )
Relevant distribution data cannot be locked ( W# 485 )
Relevant distribution data cannot be locked ( W# 486 )
Qty for plant &1, material &2 for recip. &3 cannot be distributed ( W# 487 )
Quantity for plant &1 and material &2 cannot be distributed ( W# 488 )
PO &1, item &2 could not be selected ( W# 490 )
Allocation table item &1/&2 not found ( W# 491 )
Processing method for external PO &1/&2, delivery &3 &4 changed ( W# 492 )
Processing method for external PO &1/&2, delivery &3 &4 changed ( W# 493 )
Distribution method for external PO &1/&2, delivery &3 &4 changed ( W# 494 )
Picking storage type not defined for storage location &1 ( W# 495 )
Return storage type not defined for WM movement type &1 in warehouse &2 ( W# 496 )
Subs. proc. not possible for immediate confirmation of distr. orders ( W# 497 )
Allocation table item category &1 not defined ( W# 499 )
The quantity in the goods receipts for PO &1, item &2 is negative ( W# 503 )
The quantity of the adjustment is smaller than the quantity delivered ( W# 504 )
Supply source determination cannot be executed ( W# 508 )
Collective PO schedule line vendor &1, mat. &2, &3 &4 deleted ( W# 510 )
No supply source found for material &1 and plant &2 ( W# 517 )
No purchasing group found for material &1 and vendor &2 ( W# 518 )
Quantity optimizing not possible for material &1 ( W# 519 )
Quantity optimizing not possible for material &1 ( W# 520 )
Select at least one document column ( W# 521 )
Internal error ( W# 522 )
The quantity in the main item could not be distributed ( W# 524 )
Item quantity could not be distributed ( W# 525 )
SLS subitems cannot be maintained for item &1 ( W# 526 )
Quantities in sub-items calculated new ( W# 527 )
Quantity in main item calculated new ( W# 528 )
New quantity in item &1 smaller than goods receipt quantity ( W# 529 )
New quantity in item &1 smaller than the invoiced quantity ( W# 530 )
Promotion not possible. Quantities inconsistent ( W# 531 )
You cannot cancel ( W# 532 )
Relevant service &1 not performed ( W# 535 )
Check service &1 ( W# 536 )
&1 &2, item &3 has no sub-items ( W# 537 )
Perform service &1 ( W# 538 )
Delivery item &1/&2 cannot be packed in shipping unit &3 ( W# 539 )
Current delivery generation run cancelled (no document data) ( W# 540 )
Select only procurement lines ( W# 541 )
Deliveries generated with collective no. &1 ( W# 542 )
Error triggering asynchronous processing for delivery generation ( W# 544 )
Distribution data no longer up-to-date ( W# 545 )
No entries found for current purchase order ( W# 547 )
No shipping points found for the distribution centers entered ( W# 548 )
No goods receipts found for the selection criteria you entered ( W# 549 )
Qty in main item &1 does not equal the sum of the subitems ( W# 550 )
Cond. '108' for checking if SO item du for delivery was not called ( W# 552 )
Distribution orders are not permitted with a connected external WM ( W# 553 )
The total distributed qty of &1 &2 &3 is larger than qty for distribution ( W# 806 )
No return stocks could be selected ( W# 810 )
Error number &1 (see long text) occurred during transfer posting ( W# 821 )
Supply source determination was activated due to scheduling ( W# 822 )
OTB check is active therefore seasonal procurement is necessary ( W# 829 )
Change parameter is missing or blank => Data parameter is ignored ( W+ 113 )
Catalog created via ALE => Changes may be lost ( W+ 114 )
The next available number in the number range is &1 ( W+ 118 )
Catalot &1 created via ALE => Layout is not converted ( W+ 119 )
Layout '&' already exists ( W+ 200 )
Layout area(s) already exist in layout '&' ( W+ 201 )
Grouping number '&' in area '&' already assigned in layout '&' ( W+ 202 )
Layout number range is finished ( W+ 204 )
No item(s) selected ( W+ 205 )
User & already processing basic data of catalog & ( W+ 206 )
Target is within selected area ( W+ 207 )
Layout area selected no longer exists ( W+ 209 )
Assigned items cannot be separated from higher-level item ( W+ 211 )
Item reserved for components of material '& &' ( W+ 212 )
Material is variant of generic material '&' ( W+ 213 )
Item reserved for assigned variants of material '& &' ( W+ 214 )
It is only possible to call variant selection for generic materials ( W+ 217 )
You can only insert line in independent item ( W+ 220 )
Catalog variant '&' does not exist ( W+ 221 )
You can only change the unit on the generic material '& &' level ( W+ 223 )
You cannot change the unit for components of a sales set ( W+ 224 )
Layout area & no longer exists -> operation not possible ( W+ 226 )
You can only delete component together with sales set '& &' ( W+ 229 )
Layout area '&' currently being processed by user & ( W+ 230 )
Layout area & has now been reassigned ( W+ 231 )
User & currently processing layout areas at highest level ( W+ 239 )
Material & does not have allowed category -> no insertion possible ( W+ 240 )
Target layout area is selected -> moving not possible ( W+ 244 )
Material '&' is flagged for deletion => insertion not possible ( W+ 248 )
Generic material '&' has no variants => insertion not possible ( W+ 249 )
You are not authorized to change layout area '&' ( W+ 253 )
You are not authorized to display/read layout area '&' ( W+ 254 )
You are not authorized to change layout area '&' ( W+ 255 )
You are not authorized to move layout area '&' ( W+ 256 )
You are not authorized to create layout areas ( W+ 257 )
Layout area cannot be copied to itself ( W+ 261 )
You are not authorized to copy layout area & ( W+ 266 )
Order number &1 cannot be used for material &2 ( W+ 272 )
Order number &1 cannot be used for materials &2 and &3 ( W+ 275 )
Order number &1 is currently being processed by user &2 ( W+ 276 )
Select at least one layout area ( W+ 279 )
No layout number range is assigned to logical system & ( W+ 420 )
Messages relating to product catalog &1 can be found under log no. &2 ( W+ 423 )
Product catalog & does not exist ( W+ 500 )
Variant & already exists ( W+ 501 )
Please enter language indicator ( W+ 502 )
Please enter a variant ( W+ 503 )
Variant for language '&' and currency '&' already exists ( W+ 504 )
Catalog variant material does not have the predefined material type ( W+ 506 )
Please enter currency ( W+ 507 )
Layout number range & is in critical area ( W+ 508 )
To date falls before from date ( W+ 509 )
Last number reached in layout number range & ( W+ 510 )
Layout number range & full ( W+ 511 )
Enter date ( W+ 513 )
Product catalog created via another transaction ( W+ 514 )
No layout created for product catalog & ( W+ 516 )
Variant missing -> You cannot go to layout ( W+ 517 )
Key date is not within validity period ( W+ 518 )
Sales area & & & not defined for customer & ( W+ 519 )
Variant & does not exist for product catalog & ( W+ 520 )
No layout exists for product catalog & ( W+ 521 )
Variant for language '&' and currency '&' already exists ( W+ 522 )
Variant for language '&' and currency '&' already exists ( W+ 523 )
Please enter a reference customer ( W+ 524 )
Please enter a display currency ( W+ 528 )
Display currency does not exist as a variant currency ( W+ 529 )
Only enter variants if one single catalog is selected ( W+ 534 )
Layout currently being processed by user & ( W+ 538 )
Layout currently blocked by user & ( W+ 539 )
User & currently processing layout areas ( W+ 542 )
No material type defined for catalog variant materials ( W+ 543 )
You are not authorized to display/read catalog & ( W+ 544 )
You are not authorized to change catalog & ( W+ 545 )
You are not authorized to create catalogs ( W+ 546 )
You are not authorized to copy catalog & ( W+ 547 )
You are not authorized to delete catalog & ( W+ 548 )
You are not authorized to display changes in catalog & ( W+ 552 )
You are not authorized to create IDocs for catalog & ( W+ 553 )
No authorization to create IDocs for the selected catalogs ( W+ 554 )
You are not authorized to change authorization group & ( W+ 555 )
You are not authorized to change authorization group & ( W+ 556 )
No authorization to convert the layout of catalog & ( W+ 557 )
Several catalogs selected => Default for layout number is ignored ( W+ 558 )
No conversion necessary for catalog & ( W+ 559 )
Suggested layout number is not between &1 and &2 ( W+ 560 )
No authorization to convert layout area &1 ( W+ 562 )
Catalog &2 blocked by user &1 => Conversion not possible ( W+ 564 )
Layout of &2 blocked by user &1 => Conversion not possible ( W+ 565 )
Layout area of &2 blocked by user &1 => Conversion not possible ( W+ 566 )
All numbers in range &1 used up for catalog ID ( W+ 567 )
Critical area reached for number range &1 for catalog ID ( W+ 568 )
Selection of variants only possible for message type &1 ( W+ 573 )
Message type &1 is not suitable for product catalog data ( W+ 574 )
Selection of recipients only possible for message type &1 ( W+ 576 )
Parallel processing only possible for message type &1 ( W+ 578 )
Inclusion of ref. customers in transfer only possible for message type &1 ( W+ 579 )
Only enter areas if one single catalog is selected ( W+ 580 )
Only enter items if one single area is selected ( W+ 581 )
Inclusion of materials in transmission only possible for message type &1 ( W+ 582 )
Selection of layout areas only possible for message type &1 ( W+ 583 )
Selection of items only possible for message type &1 ( W+ 584 )
Data already exists with original system &1 => No ALE import ( W+ 585 )
Layout number is not within the defined number range ( W+ 587 )
Layout number &1 different to layout number of catalog &2 ( W+ 590 )
Variant already exists with language &1 and currency &2 ( W+ 595 )
Enter at least one value per condition ( W+ 596 )
Layout & does not exist ( W+ 600 )
Area & in layout & does not exist ( W+ 601 )
Cursor is not on a line ( W+ 602 )
Inserting lines only possible for lines already filled ( W+ 603 )
No block selected ( W+ 604 )
Target is within block ( W+ 605 )
Layout area '&' contains items => You cannot delete ( W+ 606 )
'&' contains subordinate layout areas => You cannot delete ( W+ 607 )
You can only call up the editor from the long texts ( W+ 608 )
No &1 for material &2 in language &3 ( W+ 609 )
Language for copying unknown ( W+ 610 )
Item with material & and unit of measure & already exists ( W+ 611 )
Please enter a material ( W+ 612 )
Unit of measure & is not allowed for material & ( W+ 613 )
Please enter a unit of measure ( W+ 614 )
Material & does not exist ( W+ 615 )
F4 entries only possible if material already exists ( W+ 616 )
All units for material & have already been used ( W+ 617 )
Layout area contain items ( W+ 619 )
No line selected ( W+ 620 )
Item & does not exist for area & in layout & ( W+ 621 )
Incorrect entry - please enter again ( W+ 654 )
No selection fields / data entered ( W+ 657 )
More than one selection field was entered ( W+ 658 )
Material group does not exist ( W+ 659 )
The layout module does not exist ( W+ 661 )
The assortment module does not exist ( W+ 662 )
The material class does not exist ( W+ 663 )
No material class was selected ( W+ 665 )
Sales office & was not found ( W+ 670 )
Sales office &1 is not assigned to sales area &2 &3 &4 ( W+ 671 )
Sales area &1 &2 &3 does not exist ( W+ 672 )
Reference customer & does not exist ( W+ 673 )
Customer &1 is not defined for sales area &2 &3 &4 ( W+ 674 )
Internal number assignment not assigned for reference customer & ( W+ 675 )
Master IDocs &1 / communication IDocs &2 created ( W+ 750 )
Master IDocs &1 / Communication IDocs &2 (&3) ( W+ 751 )
Internal error: layout type & missing ( W+ 800 )
Internal error: function module & called wrongly => Contact hotline ( W+ 898 )
Internal error: & & & -> Inform SAP hotline ( W+ 899 )
System error blocking Table & ( W- 027 )
Errors have been found in the assignments ( W- 032 )
Error inserting assignment & ( W- 034 )
Error deleting assignment & ( W- 035 )
Hierarchy type is missing: Assignments cannot be made ( W- 036 )
Error updating assignment & ( W- 037 )
Supplier & not defined as being assigned to & ( W- 043 )
Enter a purchasing organization ( W- 044 )
Purchasing organization cannot be entered without Supplier number ( W- 045 )
Assignment not possible (higher-level supplier not created) ( W- 047 )
Purchasing organization assignment is not defined ( W- 048 )
Node & will be assigned to the same level ( W- 058 )
Higher-level node already maintained as a subordinate node ( W- 063 )
Assigned node is also a higher-level node ( W- 064 )
No authorization to display suppliers ( W- 067 )
No authorization to maintain suppliers ( W- 068 )
No authorization to display supplier & in purchasing organization & ( W- 069 )
No authorization to maintain supplier & in purchasing organization & ( W- 070 )
Date cannot be changed (inconsistent validity periods) ( W- 081 )
No hierarchy exists for supplier &1 ( W- 091 )
No materials or plants/price lists were found for the selection ( W/ 001 )
Planning number & already exists. Change the planing number ( W/ 004 )
Period incorrect or incomplete. Correct the dates ( W/ 005 )
Distribution chain & / & not found in markdown plan ( W/ 006 )
Update not successful. Data entered is lost ( W/ 007 )
The planned sales quantity cannot be smaller than 0 ( W/ 008 )
The planned initial stock cannot be smaller than 0 ( W/ 009 )
The planned sales price cannot be smaller than 0 ( W/ 010 )
The planned remaining stock is smaller than 0 ( W/ 011 )
Enter a season year ( W/ 012 )
Items can only be entered via the "Edit->Insert several" menu option ( W/ 013 )
Price phases cannot be created. Header planning data incomplete ( W/ 014 )
Of & items, & were changed and & created ( W/ 015 )
Selection cancelled. No new materials or stores selected ( W/ 016 )
Markdown must not be less than 0% or greater than 9999 ( W/ 017 )
Error reading plant table ( W/ 018 )
No purchase price found for item & / &. Maintain purchasing data ( W/ 019 )
The remaining stock value cannot be less than 0 ( W/ 020 )
The planned initial quantity cannot be smaller than the sales quantity ( W/ 021 )
Date & in item & / & may be wrong ( W/ 022 )
Currency missing for an amount. Enter currency ( W/ 023 )
Item & / & not deleted. Individual price phases are active. ( W/ 024 )
Phase with starting date entered. Caution: no sales quota (%) ( W/ 025 )
Material &: Purchasing unit & cannot be converted to sales unit ( W/ 026 )
No markdown rule found ( W/ 028 )
Starting date for item exists more than once. Correct the starting date ( W/ 029 )
Starting date for a phase cannot be before starting date for item ( W/ 030 )
No currency found for plant - plant & will not be copied ( W/ 031 )
Price and distribution chain currencies & & for material & differ ( W/ 032 )
Markdown percentage must always be greater than or equal to 0 ( W/ 033 )
Number of calendar days must be greater than 0 ( W/ 034 )
Number of calendar days cannot be greater than 10 years ( W/ 035 )
A specific value in calendar day column can only be entered once ( W/ 036 )
Please place cursor on a valid line in the table ( W/ 037 )
Calculation resulted in & plant phase items correct and & with errors ( W/ 038 )
It is not possible to access information system using selection variant & ( W/ 039 )
Information structure & has no period values based on weeks ( W/ 040 )
Selection variant & does not exist ( W/ 041 )
No plants for planning found. Activation cancelled ( W/ 042 )
The planned purchase price cannot be less than 0 ( W/ 043 )
No key figures in Information System for material & ( W/ 044 )
Number range & not created ( W/ 045 )
No plants found for selection ( W/ 046 )
Incorrect plant items during condition record update ( W/ 047 )
User session cancelled. All data is lost ( W/ 048 )
Error during automatic markdown number assignment. Termination. Error & ( W/ 049 )
Selection occurred without special cases ( W/ 050 )
No markdown plan exists, or markdown plan is empty ( W/ 051 )
The target currency does not exist in the currency table ( W/ 052 )
Conversion not possible. Conversion factor missing. ( W/ 053 )
Error during conversion ( W/ 054 )
Error during price condition creation ( W/ 055 )
Markdown plan is currently being processed ( W/ 056 )
Error when writing to database ( W/ 057 )
Error reading from the database ( W/ 058 )
Converted value is longer than the result field ( W/ 059 )
Program error ( W/ 060 )
Exchange rate type does not exist ( W/ 061 )
Position the cursor on a generic material ( W/ 062 )
No variants exist for the generic article ( W/ 063 )
Error reading information on the material ( W/ 064 )
Error during processing of the variant matrix ( W/ 065 )
Position the cursor on a phase of the generic material ( W/ 066 )
Material & cannot be deleted as phases are already activated ( W/ 067 )
Mat. & cannot be deleted as its price is dependent on another material ( W/ 068 )
Mat. & cannot be deleted as variants are already activated ( W/ 069 )
Price calc. not possible for the mat. Start date of price change missing ( W/ 070 )
Price calculation not possible for the material. Sales price missing ( W/ 071 )
Price calc. not possible for the material. Organizational data incomplete ( W/ 072 )
Transaction terminated. Error occurred during price activation ( W/ 073 )
Material references the sales price of another material ( W/ 074 )
Price-dependent material & / & not deleted ( W/ 075 )
Individual phases have been activated. Entries rejected ( W/ 076 )
Price calculation found & material phase items were correct, & faulty ( W/ 078 )
No distribution chain entered ( W/ 080 )
Price calculation at plant level not possible for distr. chain &1 &2 ( W/ 082 )
No results exist for plant ( W/ 083 )
Markdown type & does not exist ( W/ 084 )
Material & does not exist in sales unit & ( W/ 089 )
Enter a planning number ( W/ 100 )
No data found for plan no. Please enter another plan no. ( W/ 101 )
Plan no. & is already being processed by user & ( W/ 102 )
Plan & could not be blocked. Transaction terminated ( W/ 103 )
No plan defined for blocking ( W/ 104 )
Markdown plan & is saved ( W/ 105 )
Material number & not found. Enter another material number ( W/ 106 )
No purchasing info record found for material no. &. Change mat. no. ( W/ 107 )
No unit of measure entered for material &. Enter a unit of measure ( W/ 108 )
Phase percentage of sales must be between 0 and 100 ( W/ 109 )
Item &/& already assigned to plan ( W/ 110 )
Markdown rule & already exists. Please change your entry. ( W/ 111 )
Material &/&: Results outside value range. Please check factors ( W/ 112 )
Markdown rule & already exists. Please enter another name ( W/ 113 )
Markdown rule & not found ( W/ 114 )
Price phase already exists. Please change value days ( W/ 115 )
The percentage totals amount to more than 100%. Please check percentages. ( W/ 116 )
Markdown rule & was saved ( W/ 130 )
No lines were selected for deletion ( W/ 131 )
This is the first distribution chain ( W/ 132 )
This is the last distribution chain ( W/ 133 )
Price phase cannot be deleted as it is the only price phase for the mat. ( W/ 134 )
No materials/phases found for sales price activation ( W/ 137 )
Internal number assignment. Planning number was deleted ( W/ 138 )
Enter planning number ( W/ 139 )
Test ID selected - markdown plan processing is simulated ( W/ 140 )
Selection was limited to &1 of &2 hits ( W/ 142 )
Logon language & is used as the language ID ( W/ 143 )
Inconsistency with database - processing not possible ( W/ 148 )
Material &1 does not exist in dist. chain &2 &3 - processing not possible ( W/ 149 )
Database contains additional entries - processing not recommended ( W/ 150 )
Phase &1 mat. &2 does not exist in DChain &3 &4 - processing not possible ( W/ 151 )
Plant &1 dist. chain &2 &3 does not exist - processing not possible ( W/ 152 )
Material & cannot be deleted as it is pricing ref. mat. for another mat. ( W/ 153 )
Generic material &1 cannot be deleted without variant &2 ( W/ 154 )
Sales price currency cannot be changed ( W/ 155 )
Sales unit cannot be changed ( W/ 156 )
Material & is not to be processed as phases are already active ( W/ 157 )
Date & invalid ( W/ 158 )
You are not authorized to use transaction & ( W/ 159 )
Material &1 is price-dependent -> Process pricing ref. material &2 ( W/ 160 )
No item selected ( W/ 161 )
No column was selected ( W/ 162 )
Only enter amount as percentage (not both) ( W/ 164 )
Mass maintenance without amount or percentage not possible ( W/ 165 )
Start phase cannot be deleted ( W/ 166 )
Process no. &2: System or communication error; see long text ( W/ 171 )
Process number &1 with &2 pricing items started ( W/ 173 )
Caution: &1 process(es) of the &2 started not completed correctly ( W/ 175 )
No materials/phases found for test calculation ( W/ 176 )
Price phase &3 for material &1 &2 not deleted; it is already activated ( W/ 177 )
Price phase &3 for material &1 &2 not deleted; it is price-dependent ( W/ 178 )
Price phase &3 of generic mat. &1 &2 not deleted; variant is activated ( W/ 179 )
Price phase &3 of mat. &1 &2 not deleted; it is only existing price phase ( W/ 180 )
No markdown plan was found for archiving ( W/ 181 )
Enter characteristic name ( W/ 182 )
Limit your selection further ( W/ 183 )
Create the characteristic value ( W/ 184 )
Internal error during selection ( W/ 185 )
Select either a plant or a price list ( W/ 186 )
You cannot calculate on the price list level for distr. ch. &1 &2 ( W/ 188 )
Price list &1 distr. ch. &2 &3 does not exist - processing impossible ( W/ 190 )
Material &3 (distr. ch. &1 &2) is being processsed by user &4 ( W/ 191 )
Material &1 &2: Change '&3' could not be implemented ( W/ 192 )
Items selected from various distribution chains ( W/ 193 )
You have no authorization for material &3 (distr.ch. &1 &2) ( W/ 194 )
You have no authorization to access markdown plan & ( W/ 195 )
Markdown plan & cannot be deleted ( W/ 196 )
Markdown rule &1 cannot be deleted ( W/ 197 )
Price phase &3 for material &1 &2 cannot be deleted ( W/ 200 )
Materials with several selected price phases ( W/ 201 )
Internal error: & & & & => contact hotline ( W/ 289 )
The distribution chain was not deleted ( W/ 290 )
Either 'Assign MG to VO-mat.'or 'Exceptions possible" ( W0 004 )
Maintain material group hierarchy level ( W0 005 )
The MG hierarchy level field cannot be maintained ( W0 006 )
ID: 1, value-only material already exists ( W0 007 )
Deletion of reference store of store distr. chain not allowed ( W0 008 )
Store distribution chain (category 1) not maintained ( W0 009 )
Ref. store for store distrib. chain is not a store in this dist. chain ( W0 010 )
Ref. store for store distr. chain same as ref. plant for plant category ( W0 011 )
Condition type &3 does not exist for application &2 ( W0 012 )
Ref. plant for store in distr. chain contains errors (diff. mat. data) ( W0 014 )
A reference store exists globally for this store distribution chain ( W0 017 )
A reference plant already exists for stores ( W0 022 )
The same reference plant already exists for stores ( W0 023 )
Record cannot be deleted ( W0 025 )
Wrong plant class type ( W0 028 )
For application & object & of class type & is not allowed ( W0 032 )
Warehouse no. & for plant & already assigned to different plant ( W0 035 )
Error setting control indicator ( W0 036 )
"Value-only mat. freely definable" cannot be set ( W0 037 )
Indicators set only allowed for customer profiles ( W0 038 )
Time slots overlap (start & end &) ( W0 039 )
Material already created with industry &, industry cannot be changed ( W0 058 )
Select either 'Rounding off allowed' or 'Order qty one' ( W0 063 )
After start of new day, only enter timeslots for day 2 ( W0 067 )
Enter timeslots in day 2 from start without any gaps ( W0 068 )
Condition record &1 is supplementary condition without access sequence ( W0 073 )
Do not maintain the application and calculation schema fields ( W0 077 )
Maintain the application and calculation schema fields ( W0 078 )
Description &1 replaced by description &2 ( W0 079 )
Description &1 adopted ( W0 080 )
Maintain the "Function module description" field ( W0 081 )
Do not maintain the "Function module description" field ( W0 082 )
Make an entry in all three fields for pur. doc. item cat. ( W0 085 )
Make an entry in all three fields for pur. doc. item cat. or none at all ( W0 086 )
Payer entered, but "cash on delivery" indicator is not set ( W0 096 )
Do not maintain the flag for staging area determination at item level ( W0 108 )
Do not maintain any fields in the selection values for sales data box ( W0 109 )
Maintain all fields in the selection values for sales data box ( W0 110 )
Do not maintain any field in the selection values for stock data box ( W0 111 )
Maintain all fields in the selection values for stock data box ( W0 112 )
Set w/o unit flag for all units of group & or not at all ( W0 113 )
List field & cannot be entered in combination with SP calc. schema ( W0 114 )
Application & cannot be entered ( W0 115 )
Search criteria for long text only allowed if user exit used ( W0 116 )
Do not use this IMG structure any more ( W0 118 )
Enter a one-time customer number ( W0 119 )
One-time customer is maintained, but ID allowing 1x customers not set ( W0 120 )
& is not a valid entry ( W0 122 )
Payment card type is entered, but "Credit card with SET" flag not set ( W0 124 )
Sequence & already exists. No double entries allowed ( W0 125 )
Max.requested del. time is maintained, but "Enter req. del. date" not set ( W0 128 )
Coupon share and condition type: maintain both or leave both blank ( W0 130 )
Maintain coupon share and condition type, as account key entered ( W0 131 )
Maintain coupon share and condition type, as affecting margins ( W0 132 )
Maintain no. of days for double document analysis ( W0 133 )
Old reference plant cannot be changed ( W0 134 )
Number range already used for layout maintenance ( W0 137 )
Layout number range '&' does not exist ( W0 139 )
Layout number range '&' is not external ( W0 140 )
"Allow one-time customers" is set but "W/o registration" is not ( W0 143 )
Maximum requested delivery date is shorter than lead time (&1 days) ( W0 144 )
No dependent table entries being deleted ( W0 146 )
Maintain the "Use order number" indicator ( W0 147 )
Number range '&' does not exist ( W0 148 )
Table & does not exist for this value combination ( W0 149 )
Select the indicator for reading the purchase price ( W0 151 )
Error in maintaining the default reason ( W0 153 )
Automatic POD field wrongly maintained ( W0 154 )
Entry is incorrect (see long text) ( W0 157 )
Entry & is not permitted for the field name ( W0 158 )
Do not set the indicator "Do not prepare material" ( W0 159 )
Do not set the indicator "Do not prepare follow-on material" ( W0 160 )
Site &1 is no &2; select a site with the correct site type ( W0 161 )
An error occurred when the data for site &1 was being read ( W0 166 )
You cannot maintain the direct entry indicator ( W0 174 )
Note the additional settings for storage location management ( W0CSRS 011 )
Set one key in the selection box as a default ( W0CSRS 026 )
Choose the field 'Determine and display quantity proposals' ( W0CSRS 027 )
Object & class type $ not defined ( W1 028 )
Object & already exists ( W3 001 )
Specify a processing program ( W3 003 )
Specify a name for the object ( W3 004 )
Program for editing Web object does not exist ( W3 008 )
No MIME type assigned to object & ( W3 009 )
Report &1 has already been released for the Internet. ( W3 014 )
Error when canceling release of report &1 ( W3 015 )
The release of Report &1 cannot be reset ( W3 017 )
The release of function module &1 cannot be undone ( W3 020 )
An error occurred when resetting the release of function module &1 ( W3 021 )
The function module &1 has already been released for the Internet ( W3 025 )
The authorization group for report &1 is not defined ( W3 027 )
Report tree &1 has already been for the Internet. ( W3 031 )
The release of report tree &1 cannot be revoked. ( W3 032 )
An error has occurred when resetting the release of report tree &1. ( W3 033 )
Hierarchy type is missing: Assignments cannot be made ( W3 036 )
Error updating assignment & ( W3 037 )
Node & will be assigned to the same level ( W3 058 )
Higher-level node already maintained as a subordinate node ( W3 063 )
Assigned node is also a higher-level node ( W3 064 )
Date cannot be changed (inconsistent validity periods) ( W3 081 )
Default indicator for & & & & cannot be reset ( W3 117 )
Default indicator for & & & cannot be reset ( W3 120 )
Enter a usage for structure configuration for BOM explosion ( W3 123 )
Only special text objects are allowed ( W3 220 )
Text ID & in Procedure & & does not exist in TTXID ( W3 232 )
Data error: no long name entered for HTML template ( W3_API 301 )
Cannot use files of this type as MIME objects ( W3_API 401 )
Data of object &1 is invalid ( W3_TOOL 011 )
An error occurred during publishing of the object ( W3_TOOL 014 )
Browser started ( W3_TOOL 016 )
Enter the address of your ITS Web server ( W3_TOOL 031 )
Choose an ITS for publishing ( W3_TOOL 033 )
Object is being edited outside the SAP System ( W3_TOOL 034 )
Object name is too long ( W3_TOOL 035 )
Do not create any more language-specific HTML templates ( W3_TOOL 054 )
Dynpro & does not exist in & ( W3_TOOL 055 )
The state & cannot be reached ( W3_TOOL 094 )
MIME object does not contain any picture data ( W3_TOOL 103 )
No WML cards defined in the dynpro ( W3_TOOL 105 )
HTML template & is not in the upgrade ( W3_TOOL 107 )
Cannot display MIME objects under non-standard code pages ( W3_TOOL 108 )
Cannot publish MIME objects under non-standard code pages locally ( W3_TOOL 109 )
Internal error ( W3_TOOL 119 )
Compare for object &1 is not possible ( W3_TOOL 120 )
Conversion Error. Incorrect Display. Watch Long Text. ( W3_TOOL 121 )
Enhancement of file &1&2&3 unknown on front end ( W3_TOOL 124 )
Error in parameter specification for service ( W3_TOOL 151 )
The parameter &1 does not exist in resource file &2 ( W3_TOOL 206 )
Enter an Internet service that you want to publish ( W3_TOOL 252 )
An inactive version exists for dynpro &1 &2 ( W3_TOOL 352 )
Replace Tab.: Row &1, Column &2 ( W3_TOOL 353 )
Results possibly incomplete ( W3_TOOL 404 )
Only display changed ( W3_TOOL 505 )
&: & purchase order exists ( W4 001 )
&: & contract exists ( W4 002 )
&: & scheduling agreement exists ( W4 003 )
&: & info record exists ( W4 004 )
&: & purchase requisition exists ( W4 005 )
&: & routing exists ( W4 006 )
&: & dependent storage location entries exist ( W4 007 )
&: & planned order exists ( W4 008 )
&: & indep. requirements exist ( W4 009 )
&: & production order exists ( W4 010 )
&: & quant exists ( W4 011 )
&: & use in sales and distribution ( W4 012 )
&: & use as production resource/tool in routing or order ( W4 013 )
&: & bill of material exists ( W4 014 )
&: & use in bill of material ( W4 015 )
&: & use in routing ( W4 016 )
&: & reservation / dependent requirements exist ( W4 017 )
&: & WM quant exists or WM transfer requirement exists ( W4 018 )
&: & WM transfer requirement exists ( W4 019 )
&: & WM stock transfer (from material) exists ( W4 020 )
&: & WM transfer order exists ( W4 021 )
&: & WM stock transfer (to material) exists ( W4 022 )
&: & run schedule header exists ( W4 023 )
&: & assignments (product group/planning) exist ( W4 024 )
&: & use in product group exists ( W4 025 )
&: & sales and operations plan exists ( W4 026 )
&: & reference to a reference functional location exists ( W4 027 )
&: & reference to a functional location exists ( W4 028 )
&: & reference to equipment exists ( W4 029 )
&: & reference to a medium exists ( W4 030 )
&: & plant is assigned to the valuation area ( W4 031 )
&: & plant is supplying plant for a purchase order ( W4 032 )
&: & Dependent batch stocks exist ( W4 033 )
&: & material is configured ( W4 034 )
&: & serial number(s) exist(s) ( W4 035 )
&: & Class assignments (configuration) exist ( W4 036 )
&: & configuration data exists ( W4 037 )
&: & use in routing -&- ( W4 038 )
&: & routing exists -&- ( W4 039 )
&: & unrestricted-use, valuated stock exists ( W4 040 )
&: & stock in transfer exists ( W4 041 )
&: & stock in quality inspection exists ( W4 042 )
&: & restricted-use stock exists ( W4 043 )
&: & blocked stock exists ( W4 044 )
&: & blocked stock returns exist ( W4 045 )
&: & unrestricted-use consignment stock exists ( W4 046 )
&: & consignment stock in quality inspection exists ( W4 047 )
&: & restricted-use consignment stock exists ( W4 048 )
&: & blocked consignment stock exists ( W4 049 )
&: & physical inventory blocking indicator is set ( W4 050 )
&: & physical inventory indicator is set for warehouse stock ( W4 051 )
&: & physical inventory indicator is set for inspection stock ( W4 052 )
&: & physical inventory indicator is set for restricted-use stock ( W4 053 )
&: & physical inventory indicator is set for blocked stock ( W4 054 )
&: & physical inventory indicator is set for whse stock in previous per. ( W4 055 )
&: & physical inventory indicator is set for insp. stock in previous per. ( W4 056 )
&: & phys. inventory indicator set for restr.-use stock in previous per. ( W4 057 )
&: & physical inventory indicator set for blocked stock in previous per. ( W4 058 )
&: & unrestricted-use, valuated stock in previous period exists ( W4 059 )
&: & stock in transfer in previous period exists ( W4 060 )
&: & stock in quality inspection in previous period exists ( W4 061 )
&: & restricted-use stock in previous period exists ( W4 062 )
&: & blocked stock in previous period exists ( W4 063 )
&: & blocked stock returns in previous period exist ( W4 064 )
&: & physical inventory indicator set for whse stock for following year ( W4 065 )
&: & physical inventory indicator set for inspection stock for fol. year ( W4 066 )
&: & phys. inventory indicator set for blocked stock for following year ( W4 067 )
&: & source list entries exist ( W4 068 )
&: & quota arrangement exists ( W4 069 )
&: & arrangements exist in Purchasing ( W4 070 )
&: & stock allocation exists ( W4 071 )
&: & promotion exists ( W4 072 )
&: & stock valuation takes place for this material ( W4 073 )
&: & listing conditions exist ( W4 074 )
&: & selling period extends beyond the sales block date ( W4 075 )
&: & plant is vendor in purchasing info records ( W4 076 )
&: & delivery exists ( W4 077 )
&: & request for quotation exists ( W4 078 )
&: & The material ledger still has to be settled ( W4 079 )
&: & Costing data exists ( W4 080 )
&: & Variants exist ( W4 081 )
&: & The plant is the reference plant ( W4 082 )
&: & Stock in transit exists ( W4 083 )
&: & assortment is sold-to party in sales and distribution ( W4 084 )
&: & assortment is sold-to party for deliveries ( W4 085 )
&: & Stock exists for value-only material ( W4 086 )
&: & Stock in transfer exists for value-only material ( W4 087 )
&: & Transit value exists for value-only material ( W4 088 )
&: & Stock transfer sales value exists for value-only material ( W4 089 )
&: & dependent consignment stock records exist ( W4 090 )
&: & dependent batch records exist ( W4 091 )
&: & dependent sales order stock records exist ( W4 092 )
&: & dependent project stock records exist ( W4 093 )
&: & export license data exists ( W4 094 )
&: & preference data exists ( W4 095 )
&: & dependent sales order stock records (totals) exist ( W4 096 )
&: & dependent batch records exist ( W4 097 )
&: & dependent special stocks at the customer exist ( W4 098 )
&: & dependent special stocks at the vendor (totals) exist ( W4 099 )
&: & dependent special stocks at the vendor exist ( W4 100 )
&: & dependent consignment price records exist ( W4 101 )
&: & use in the product catalog ( W4 102 )
&: & replenishment stock exists ( W4 103 )
&: & tied empties stock exists ( W4 104 )
&: & sales value of tied empties stock does not equal 0 ( W4 105 )
&: & dangerous goods data exists ( W4 106 )
&: & internal use of the material ( W4 107 )
&: & material is used in certificate profiles ( W4 108 )
&: & MPN material master record exists ( W4 109 )
&: & Use in assortment modules ( W4 110 )
&: & Manufacturer parts exist ( W4 111 )
&: & use in layout modules ( W4 112 )
&: & usage in returnable packaging accounts ( W4 113 )
&: & Material is used in control cycles ( W4 114 )
&: & Usage in a configuration folder ( W4 115 )
&: & Usage in a configuration definition ( W4 116 )
&: & Usage in a baseline ( W4 117 )
&: & Usage as a controlled object ( W4 118 )
&: & Material is used in quality information records ( W4 121 )
&: & Material is used in inspection lots ( W4 123 )
&: & Quality notifications exist ( W4 124 )
&: & listing conditions for general assortments exist ( W4 141 )
Note: the input data was reorganized for postprocessing ( W4 244 )
Not possible to assign a number (Please check number assignment) ( W5 006 )
Parameter for plant - WRK - missing from your user master record ( W5 010 )
Parameter for release code FAB missing from your user master record ( W5 012 )
Pass on the desired status when calling up the method ( W5 015 )
No product groups could be determined ( W5 016 )
Parameter for release group FGR missing from your user master record ( W5 017 )
No purchase requisitions can be released with release code & ( W5 018 )
No purchase orders can be released with release code & ( W5 019 )
Parameter for release group missing from your user master record (FGB) ( W5 020 )
Parameter for purchasing group (EKG) missing from your user master record ( W5 025 )
Material & inadequately maintained: will be reset ( W5 050 )
Data in & for item & does not correspond to current database status ( W5 058 )
Inconsistencies in structure & (Please check the ABAP Dictionary) ( W5 059 )
Purchase order & & is not an order for external services ( W5 084 )
Purchase order & & contains no planned services ( W5 085 )
Retrospective adoption of planned services not possible ( W5 087 )
No purchase order specified in user parameters & & ( W5 088 )
Specify a cost center for service & ( W5 089 )
Enter a unit of measure for service & ( W5 090 )
Line with quantity/unit of measure not possible without service ( W5 091 )
The BAPI_REQUIREMENT_CREATE can only create the PReq in local currency & ( W5 099 )
Purchase requisition & & blocked ( W5 102 )
Release prerequisites not satisfied ( W5 103 )
Release outside field of responsibility ( W5 105 )
Purchasing document & blocked ( W5 108 )
A general error has occurred in release ( W5 112 )
You have not yet released any purchase orders ( W5 114 )
You have not yet released any purchase requisitions ( W5 115 )
Please enter at least one service ( W5 118 )
Error calling 'BAPI_PO_GETITEMS' with return code & ( W5 143 )
Partne role &1 cannot be processed by BAPI &2 ( W5 150 )
Subcontracting item & & will not be processed due to reservations ( W5 154 )
Quantity conversion from &3 to &4 for material &1 from res. &2 failed ( W5 160 )
Hierarchial display levels will be extended ( W6 002 )
Material type & of material & is not defined for empties ( W6 003 )
No conversion factor maintained for material &, unit of measure & ( W6 006 )
Entry in material master for material & and plant & ( W6 007 )
Restricted-use stock exists for material & in plant & / & ( W6 013 )
For material &, material type & is not maintained ( W6 100 )
Material &1 still has warehouse stock in plant &2 ( W7 001 )
Material &1 still has valuated stock in plant &2 ( W7 002 )
Material &1 in plant &2 is still part of an active physical inventory ( W7 003 )
Value-only material &1 still has valuated stock in plant &2 ( W7 004 )
Material group hierarchy level must have a value between 1 and 9 ( W7 005 )
In plant &1 material groups have already been assigned value-only mat. ( W7 006 )
System error: parameters set wrongly during internal call ( W7 007 )
No material group materials exist in plant &1 ( W7 008 )
Exceptions still exist in plant &2 for material group &1 ( W7 009 )
Please enter a plant number ( W7 010 )
Exceptions still exist for plant &1 ( W7 011 )
Stock of value-only material &1 still exists in plant &2 ( W7 012 )
Value-only material &1 is being physically inventoried in plant &2 ( W7 013 )
No material group materials found ( W7 014 )
No profile for value-based Inventory Management found for number &1 ( W7 015 )
Check your entry ( W7 016 )
Plant &1 does not exist ( W7 017 )
Error checking valuation at retail for valuation area &1 ( W7 018 )
Error reading material type &1 ( W7 019 )
No posting possible to value-only material &1 in plant &2 ( W7 020 )
No hierarchy material found for material group &1 ( W7 021 )
Error reading material group &1 ( W7 022 )
Value-based Inventory Management is not defined for plant &1 ( W7 023 )
Please position cursor on a selection line ( W7 024 )
Error reading valuation area for plant &1 ( W7 025 )
Valuation at retail is not allowed in this plant ( W7 026 )
System error: error deleting in an internal table ( W7 027 )
A faulty profile was transferred ( W7 028 )
You must enter a material number ( W7 029 )
Material &1 does not belong to material group &2 ( W7 030 )
Material &1 is a value-only material ( W7 031 )
Material &1 is not a value-only material ( W7 032 )
The profile for value-based Inv. Management contains a hierarchy level ( W7 033 )
Error reading valuation area &1 ( W7 034 )
Error: the system expected you to enter either a plant or valuation area ( W7 035 )
No stock level determination possible for material group &1 ( W7 036 )
Error determining profile for value-based Inventory Management ( W7 037 )
No materials found for material group &1 ( W7 038 )
The profile for value-based Inv. Management contains no hierarchy level ( W7 039 )
No listing procedure found ( W7 040 )
Material &1 cannot be listed in plant &2 ( W7 041 )
No posting possible to value-only material &1 in plant &2 ( W7 042 )
Material &1 is not assigned to any material group ( W7 043 )
No material found for material group &1 ( W7 044 )
No plant number transferred ( W7 045 )
Plant &1 does not exist ( W7 046 )
Material &1 does not exist ( W7 047 )
No material found for material group &1 and season category &2 ( W7 048 )
No material group material found for material group & ( W7 049 )
Enter a plant or a valuation area ( W7 050 )
Enter a plant ( W7 051 )
Material type &1 is not defined for value-only materials ( W7 052 )
Material category &1 not defined for value-only materials ( W7 053 )
Error determining material group ( W7 054 )
Error occurred during compulsory parameter transfer ( W7 055 )
Material &1 cannot be reclassified ( W7 057 )
Stocks still exist for material &1 in plant &2 in storage location &3 ( W7 058 )
Third-party special stock exists for mat. &1 in plant &2 in st.loc &3 ( W7 059 )
Subcontracting stock still exists for material &1 in plant &2 ( W7 060 )
Company-own special stock exists for mat. &1 in plant &2 ( W7 061 )
Sales order stock exists for mat. &1 in plant &2 in storage loc. &3 ( W7 062 )
Project stock exists for mat. &1 in plant &2 in storage loc. &3 ( W7 063 )
Value-only material &1 still has valuated stock in plant &2 ( W7 064 )
Exceptions still exist for value-only material &1 in plant &2 ( W7 065 )
Value-only material &1 is being physically inventoried in plant &2 ( W7 066 )
Value-only material &1 still has valuated stock in plant &2 ( W7 067 )
Value-only material &1 is being physically inventoried in plant &2 ( W7 068 )
Material &1 is managed on a value-only basis in MG &3 in plant &4 ( W7 069 )
Material &1 has another stock material in MG &3 in plant &4 ( W7 070 )
Material &1 is managed on a value-basis in plant &4 in material group &2 ( W7 071 )
No value-only material found for material &1 and plant &2 ( W7 072 )
Enter either a material or a material group ( W7 073 )
You can select a distr. channel only in conjunction with a sales org. ( W7 074 )
Error restricting stock data at plant level ( W7 075 )
No plant class type has been maintained for the stock overview ( W7 076 )
No materials could be found for the selection criteria specified ( W7 077 )
Value-only material &1 cannot be adopted when profile changes ( W7 078 )
Choose a class type for grouping together plants ( W7 079 )
Stock cannot be determined in material group &1 ( W7 080 )
No hierarchy material exists for level &2 in material group &1 ( W7 081 )
Error reading company code &1 ( W7 082 )
Value & does not correspond to the data type & of element & ( W8 004 )
The interface of function module '&1' does not correspond to conventions ( W8 020 )
&1 errors occurred in binding assignment to &2 ( W8 051 )
&1 errors occurred in binding assignment to &3 ( W8 052 )
&1 errors occurred in the condition evaluation of &2 ( W8 053 )
Table action "Append" is only possible for single-level expressions ( W8 060 )
Reference '&1'('&2') has changed - binding adapted for '&3' ( W8 063 )
Value for expression &1 cut ( W8 066 )
Input not supported for structured elements with data type '&1' ( W8 069 )
Element & has no structure reference, therefore no access to fld & in & ( W8 071 )
No access to field & in element & (expression & ) possible w/o structure ( W8 072 )
Element & from expression & is incompatible with structure & ( W8 073 )
Element & cannot be read with structure & ( W8 074 )
Source and target structures have different numbers of fields (&, &) ( W8 075 )
Access to field & is not possible for multiline element & ( W8 077 )
Access to attribute & is not possible for multiline element & ( W8 078 )
CHAR string of length & becomes value with reference structure & ( W8 083 )
Access with line index () is not possible for element & (one line) ( W8 084 )
Access with line index () is not possible for expression part & ( W8 085 )
Source & corresponds to object type & and not & ( W8 088 )
Binding for element '&3' adapted to new data type or length ( W8 094 )
Syntax '()' only allows read access to element & ( W8 096 )
Syntax '()' is only possible for elements of the container ( W8 098 )
No container definition available ( W8 100 )
Source & corresponds to object type & and not & ( W8 108 )
Reference types '&1' and '&2' are not compatible (expression '&3') ( W8 109 )
Syntax error in expression &1 ( W8 110 )
The data type & cannot be converted to data type & ( W8 116 )
***** Binding definition: Direction "&", element & ***** ( W8 119 )
Table action not possible on element & ( W8 129 )
Multiline element & cannot be assigned to a single-line element ( W8 131 )
Element & has been defined as single-line but can now become multiline ( W8 133 )
Assignment of variable object type & to object type & may contain errors ( W8 134 )
Constants cannot be declared here ( W8 137 )
Object type & overwrites initial object type of target element ( W8 145 )
Function only allowed for data type CHAR (not for data type &) ( W8 149 )
Expression & only allows single-line values ( W8 152 )
Element & from expression & is not in container ( W8 154 )
Element & could not be recognized as an object reference ( W8 157 )
Value for container element & is initial, no attributes can be determined ( W8 158 )
Element & does not have a reference type (see container definition) ( W8 162 )
Expression & does not have a valid date format or time format ( W8 175 )
Enter the value for element & using the input help ( W8 177 )
Data type incompatible ( W8 181 )
References '&1' and '&2' are not compatible ( W8 182 )
Element & is assigned data for all source elements ( W8 183 )
Element & is the source for all target elements ( W8 184 )
Expression & is not a constant ( W8 186 )
Logical system & is not valid (current system: & ) ( W8 187 )
Element & is only intended for data export ( W8 188 )
Field or field value restrictions are only valid for "change" event & ( W8 190 )
Field or field value restrictions for "change" event only ( W8 191 )
Value & exists in client &, but check table & is client-specific ( W8 192 )
Value & is invalid in client &, but check table & is client-specific ( W8 193 )
Value & is allowed in language &, but check table & is language-specific ( W8 194 )
Value & is invalid in language &, but check table & is language-specific ( W8 195 )
Value & cannot be checked against table & ( W8 196 )
Value of type & is used for defining date (type &) ( W8 198 )
No binding for required element &1&, use default value ( W8 207 )
Condensing of containers not supported for element &1 ( W8 210 )
Expression &1: Invalid syntax for access to structure field ( W8 220 )
Select a line area first ( W8 305 )
Operator '&' cannot be used in this position ( W8 310 )
Add a logical operator (AND, OR) to line &1 ( W8 311 )
Object type &1 does not have a method for checking existence ( W8 312 )
Existing selection removed ( W8 315 )
Position the cursor on an expression ( W8 319 )
Choose a line in the condition by double-clicking ( W8 322 )
Simulated evaluation of the condition returns &1 error(s) ( W8 323 )
Logical operator &1 (in line &2) is not permitted ( W8 325 )
Cursor automatically positioned on expression &1 ( W8 329 )
Error accessing local file - operation aborted ( W8 336 )
Too many closing parentheses in line &1 ( W8 340 )
Opening parenthesis in line &1 not closed ( W8 341 )
Operator '&1' can only be applied to an object reference ( W8 352 )
Operator '&1' cannot be applied to a multiline element ( W8 353 )
Operator '&1' allows only one operand ( W8 354 )
Condition '&' saved and type linkage &.& <-> & created ( W8 380 )
Mode switch not effective until next time condition editor called ( W8 396 )
Welcome to the condition editor (traditional mode) ... ( W8 397 )
Welcome to the condition editor ... ( W8 398 )
Workflow & not found - enter a valid workflow ID ( W8 406 )
HTML control: Error accessing resource '&1' ( W8 411 )
Event linkage '&1'<->'&2.&3' deactivated ( W8 413 )
Event linkage '&1'<->'&2.&3' activated ( W8 414 )
Start condition '&1' activated ( W8 416 )
Start condition '&1' deactivated ( W8 417 )
New default currency for start condition '&1': &2 ( W8 418 )
Object type '&1' defines no events. Use not possible. ( W8 422 )
Create a start condition; click the required event linkage ( W8 423 )
Start condition being processed by user &1 - Only display possible ( W8 425 )
Start condition '&1' could not be activated ( W8 428 )
There are changes that have not been assigned to a transport request ( W8 430 )
No exchange rate found for currency conversion '&1' -> '&2' ( W8 435 )
Error during currency conversion '&1' -> '&2' ( W8 436 )
Conversion only possible for field restrictions without entry KEY ( W8 520 )
Field restrictions and a combined field restriction exist ( W8 521 )
A combined field restriction already exists ( W8 523 )
Field restrictions exist that have not yet been converted ( W8 526 )
Key for change doc. object & and business object type & are incompatible ( W8 706 )
Some parameters of event are not assigned values during creation ( W8 710 )
Internal error accessing database ( W8 711 )
No change document written for & when changed ( W8 712 )
No change document written for & when created ( W8 713 )
No change document written for & when deleted ( W8 714 )
Creation/deletion of records in table & checked ( W8 718 )
Event & can only be a triggering event ( W8 719 )
Field name 'KEY' can be used to check create/delete for table & ( W8 723 )
Field & is not part of change document ( W8 726 )
Key already exists for change document object & ( W8 728 )
A system error has occurred ( W8 805 )
Stored workflow trace cannot be deleted ( W8 810 )
Job & could not be scheduled ( W8 814 )
No authorization to change an existing start condition ( W8 998 )
No authorization to create a new start condition ( W8 999 )
Choose an event or select "Extend object type" ( WA 003 )
Business object type &1 has status &2. Linkage not possible. ( WA 129 )
Error activating & ( WA 143 )
No change document object for business object type &1 ( WA 160 )
The existing subtype &1 is used for the extension ( WA 161 )
Event linkage not possible for change document &1 ( WA 164 )
The problem cannot be cleaned up automatically ( WA 434 )
Enter a receiver type ( WA 451 )
Receiver function module & can only be used for type linkages ( WA 452 )
Receiver FM & can only be used for instance linkages ( WA 453 )
Receiver function module & can only be used for BOR objects ( WA 454 )
All modules must support the same type of interface ( WA 523 )
Number range object & not found ( WA 600 )
Number for number range object & could not be generated ( WA 601 )
Object type & for event & not found ( WA 602 )
Object type & not allowed for automatic type linkage ( WA 603 )
No entries found corresponding to the selection criteria ( WA 610 )
No table entry selected ( WA 611 )
Status of event trace was not changed ( WA 614 )
The selected events were deleted ( WA 615 )
Instance linkage between & & and & & cannot be deleted ( WA 620 )
Instance linkages event & receiver & cannot be deleted ( WA 621 )
Linkage number cannot be generated ( WA 622 )
Instance linkage between & & and & & cannot be entered ( WA 623 )
Instance linkage between & & and & &: Type linkage cannot be entered ( WA 624 )
Instance linkage between & & and & &: Type linkage cannot be activated ( WA 625 )
Instance linkages for & & cannot be copied to & & ( WA 626 )
Instance linkages to task & cannot be deleted ( WA 627 )
Type linkage between & & and &: Not possible to change check funct.mod.& ( WA 630 )
Type linkage between & & and &: Deletion not possible ( WA 631 )
Type linkage between & & and &: Deactivation not possible ( WA 632 )
Type linkage between & & and &: Activation not possible ( WA 633 )
Type linkage between & & and &: Insertion not possible ( WA 634 )
Type linkage betw. & & and &: Not possible to change receiver funct.mod.& ( WA 635 )
Type linkage betw.& & and &: Not possible to change rec.type determ. FM & ( WA 636 )
Type linkage & & for &: Indicator for type linkage not set ( WA 637 )
Type linkage & & for &: Indicator for type linkage not deleted ( WA 638 )
Type linkage between & & and &: No entry found ( WA 639 )
Type linkage betw. & & and &: Exception & when checking transport object ( WA 640 )
Type linkage betw. & & and &: Exception & when inserting transport object ( WA 641 )
Type linkage between & & and &: Entry exists with other secondary data ( WA 642 )
Type linkages to task & cannot be deleted from table & ( WA 643 )
Type linkage between & & and &: Status "no errors" cannot be set ( WA 645 )
Receiver function module & not found ( WA 650 )
Receiver function module &: Error determining interface ( WA 651 )
Receiver function module &: Invalid name for a function module ( WA 652 )
Receiver function module &: Parameter & has an invalid reference & ( WA 653 )
Receiver function module &: Parameter & is not optional ( WA 654 )
Receiver function module & not identified as RFC-compatible ( WA 655 )
Check function module & not found ( WA 660 )
Check function module &: Error determining interface ( WA 661 )
Check function module &: Invalid name for a function module ( WA 662 )
Check function module &: Parameter & has an invalid reference & ( WA 663 )
Check function module &: Parameter & is not optional ( WA 664 )
Receiver type determination function module & not found ( WA 670 )
Receiver type determination func. module &: Error determining interface ( WA 671 )
Receiver type determination func. module &: Invalid name for a func. mod. ( WA 672 )
Receiver type determination FM &: Parameter & has invalid reference & ( WA 673 )
Receiver type determination func. mod. &: Parameter & is not optional ( WA 674 )
Error deleting obsolete linkage entries ( WA 676 )
& & not found ( WA 680 )
& &: Error determining interface ( WA 681 )
& &: Name not valid for function module ( WA 682 )
& &: Parameter & does not exist ( WA 683 )
& &: Parameter & has invalid reference & ( WA 684 )
& &: Parameter & is not optional ( WA 685 )
Event creation not possible for this work item type ( WA 700 )
Event receivers of type & cannot be displayed ( WA 703 )
The event has not yet been delivered ( WA 845 )
Error reading event ( WA 847 )
Error saving administration data ( WA 848 )
Background job scheduling not changed ( WA 858 )
Customizing data cannot be transported to client & ( WA 894 )
Specify the number of events to be read per access ( WA 898 )
Specify a time period to the next read access ( WA 899 )
Price determination and settlement partner category do not match ( WAB 006 )
Internal error: BAdI implementation for filter & missing ( WAB 021 )
Deactivating tax code for settlement document type & not allowed ( WAB 033 )
Cross-Company-Code Transactions Not Supported ( WAB 040 )
Settlement document type &1 for settlement process type &2 not allowed ( WAB 041 )
Sales area data not intended for settlement partner &1 ( WAB 043 )
Purchasing organization data not intended for settlement partner &1 ( WAB 044 )
Message log &1 was saved ( WAB 046 )
Report & terminated (see log) ( WAB 050 )
Item cancellation only possible with Settlement using Follow-On Documents ( WAB 053 )
Item &1 was already distributed ( WAB 060 )
Not all items of source document &1 were cancelled ( WAB 066 )
External number assignment not implemented (number range &1 &2) ( WAB 068 )
No external number assigned (number range &1 &2 is external) ( WAB 069 )
Payment Recipient &1 <> Invoicing Party &2 ( WAB 099 )
Alternative Creditor &1 <> Invoicing Party &2 ( WAB 100 )
Local crcy &1 co. code customer &2 <> Local crcy &3 co. code supplier &4 ( WAB 101 )
A profit center document &1 for document &2 already exists ( WAB 103 )
Posting type 6 (to clearing account with tax) is not allowed &1 ( WAB 118 )
Completing customer settlements from two-sided documents is not allowed ( WAB 119 )
Completing supplier settlements from two-sided documents is not allowed ( WAB 120 )
Preceding document &1 of item &2 already processed further ( WAB 121 )
Item &1 preceding document &2 of item &3 already processed further ( WAB 122 )
Cancellation of cancellation not possible: Original doc. &1 cancelled ( WAB 123 )
Barcode &1 does not have correct format for barcode category &2 ( WAB 126 )
You cannot enter bank data for this document ( WAB 129 )
IBAN &1 was identified for the bank details; please check ( WAB 130 )
Item can be canceled during creation at header level only if doc. settled ( WAB 135 )
Completion of collective documents from settlement docs not permitted ( WAB 143 )
No application log object maintained for settlement document type &1 ( WAB 149 )
Collective documents and their source docs cannot be processed together ( WAB 153 )
Application logs are created for this event only during BAPI processing ( WAB 157 )
Cancel change fields group not allowed with category &1 &2 ( WAB 164 )
Posting Type "Rollover" inconsistent ( WAB 180 )
Enter a settlement document type for a supplier settlement list ( WAB 189 )
Inconsistency between net &1 tax &2 and gross &3 amounts in pricing ( WAB 190 )
An internal error occurred during number assignment ( WAB 191 )
Supplier &1 blocked ( WAB 245 )
Supplier &1 blocked for purchasing organization &2 ( WAB 246 )
Supplier &1 is blocked for company code &2 ( WAB 247 )
Supplier &1 blocked for all company codes ( WAB 248 )
"from Pricing Procedure" requires Partner Lines at Condition Record Level ( WAB 249 )
No bill-to-party allowed for settlement process type &1 ( WAB 252 )
Could not execute method &1 ( WAF 001 )
Method &1 raised system exception &2 ( WAF 013 )
You can only install one version of an application ( WAF 030 )
Period indicator &1 is not allowed ( WAHD 001 )
Could not set lock on table WAHD(-OVAL)for plant &1 ( WAHD 004 )
Enter restrictions for the data to be selected ( WAHD 023 )
Invalid query definition; selection missing or incorrect for &2 ( WAHD 201 )
Invalid query definition; key figure &2 is missing or incorrect ( WAHD 202 )
Invalid query definition; incorrect number of characteristics ( WAHD 203 )
Conflict in recipient selection in query definition &1 with DRD profile ( WAHD 204 )
Query for the period is different to the update period in ECC ( WAHD 207 )
Conflict with base unit of measure for material &1 (ECC = &2, BW = &3) ( WAHD 209 )
You cannot maintain AHD when creating a material ( WAHD 401 )
When changing a material, AHD can only be displayed ( WAHD 402 )
Internal error occurred when displaying the AHD (see long text). ( WAHD 403 )
AHD not active. Data will be shown in display mode. ( WAHD 605 )
Distribution according to allocation rule &2 was not successful ( WAUF_ADD 010 )
Planned qty resulted in neg. val. for plant & and was therefore set to 0 ( WAUF_ADD 012 )
The allocation strategy processing was canceled ( WAUF_ADD 016 )
No putaway into the distribution center was possible for this item ( WAUF_ADD 017 )
No settings could be made for putaway into the distribution center ( WAUF_ADD 021 )
Putaway for remaining stock to DC could not be carried out ( WAUF_ADD 025 )
In quantity calculation, the planned quantity is assumed to be zero ( WAUF_ADD 026 )
Rounding according to rounding profile only at item level ( WAUF_ADD 029 )
Only enter an interval when using the supply period option ( WAUF_ADD 031 )
Customers do not exist ( WB 001 )
Plant data not found ( WB 002 )
Data for plant & incomplete ( WB 003 )
No customers with communication profile selected ( WB 004 )
No materials are assigned to the layout module selected ( WB 005 )
No materials exist for selection criteria ( WB 006 )
Materials for assortment list type & do not exist ( WB 007 )
No customers with assortment list profile selected ( WB 009 )
Assortment list types do not exist ( WB 010 )
No language is assigned to plant & ( WB 013 )
Version no. &1 for customer &2 and assortment list &3 is already blocked ( WB 015 )
Version no. & for customer & and assort. list type & already exists ( WB 016 )
Version no. for customer &1 and assortment list &2 is in critical area ( WB 019 )
No layout modules have been assigned to the materials ( WB 020 )
Maximum version no. for customer &1 and assortment list &2 is exceeded ( WB 021 )
Too many versions being processed for customer &1 and asst list type &2 ( WB 022 )
No assortment list items exist ( WB 026 )
ISO code & is assigned to more than one unit of measurement ( WB 027 )
Data on assortment list profile & does not exist ( WB 028 )
Description for assortment list profile & does not exist in language & ( WB 029 )
Logistic quantity control data for AL & and qty type & does not exist ( WB 030 )
Logistic quantity control data for AL type & does not exist ( WB 031 )
No assortment list version exists for selection ( WB 032 )
Assortment list group data not found ( WB 033 )
Data on assortment list profile & for AL type & does not exist ( WB 034 )
Plant & not assigned the category "allowed condition types" ( WB 035 )
No layout is assigned to customer & ( WB 036 )
No purchasing info record exists for supplier selected for material & ( WB 038 )
The supplier selected do not supply materials ( WB 039 )
POS outbound log & not read ( WB 041 )
Number assignment for POS outbound log is in critical area ( WB 051 )
Last number reached in POS outbound log ( WB 052 )
Number range '1' for POS outbound log does not exist ( WB 054 )
IDoc not posted ( WB 056 )
Assortment list items not posted ( WB 057 )
No recipient exists for IDoc in distribution model ( WB 058 )
No layout areas exist for layout & ( WB 060 )
Customer not limited ( WB 063 )
Selection of materials not limited ( WB 064 )
Intermediate structure & does not exist ( WB 070 )
No price found for material & in Un & from & to & ( WB 089 )
Purchasing info record & for material & not found ( WB 093 )
Purchasing info record & for material & and plant & not found ( WB 094 )
No price found for material & between & and & ( WB 096 )
No tax rate found for material & ( WB 097 )
System error in include &1 &2 ( WB 099 )
Data on material & and material group & in customer & not found ( WB 101 )
Sales status & for material & not found ( WB 103 )
Purchasing status & for material & not found ( WB 104 )
POS data for material & not found ( WB 106 )
Material & is not assigned to any layout module ( WB 130 )
No materials exist for selection ( WB 131 )
No mat. listed for customer & with assortment list type & from & to & ( WB 132 )
Changed mat. for assort. list type & are not listed for customer & ( WB 133 )
No mat. changed for customer & and assortment list type & ( WB 134 )
Materials for AL type & are not listed for customer & ( WB 136 )
Select only assortment list versions that are no longer valid ( WB 141 )
Only assortment lists are displayed that can be generated today ( WB 147 )
No status history exists for customer & and assort. list type & ( WB 153 )
No further assortment list version exists ( WB 156 )
Also select assortment list versions already processed ( WB 157 )
Examine creation cycle only for assortment lists already initialized ( WB 158 )
Assortment lists created for no customer ( WB 160 )
Supplier does not exist ( WB 161 )
Data on assortment list profile does not exist ( WB 162 )
Please select a line for assortment list version ( WB 165 )
Error opening form & ( WB 170 )
No form or printer in assortment list profile & ( WB 171 )
No application log exists for item & ( WB 180 )
Bill of material does not exist for material & ( WB 190 )
Versions for customer &1 and assortment list mat. &2 cannot be mixed ( WB 210 )
No new merged version necessary for customer &1 and asrtmnt list type &2 ( WB 211 )
Blocked data is not displayed; see long text ( WB 220 )
Document incomplete ( WB2B 024 )
No item categories are maintained for trading contract type &1 ( WB2B 028 )
Schedule lines cannot be created for main items ( WB2B 039 )
Schedule lines have already been created for the main item ( WB2B 040 )
Maximum value exceeded during calculation of net value ( WB2B 041 )
The value is not copied to all items ( WB2B 042 )
Material-dependent fields are copied from the material master again ( WB2B 044 )
The item has not yet been created ( WB2B 045 )
Errors occurred during creation of follow-on documents ( WB2B 053 )
Schedule lines have already been maintained ( WB2B 054 )
Sub-items for the item have already been created ( WB2B 055 )
The goods recipient was not entered ( WB2B 060 )
Physical deletion no longer possible. Deletion flag is set ( WB2B 061 )
Sub-items can no longer be created for this item ( WB2B 063 )
The sales quantities do not correspond with the purchasing quantities ( WB2B 068 )
The check for financial documents was negative ( WB2B 069 )
The document can no longer be deleted ( WB2B 070 )
Combination not allowed ( WB2B 079 )
The cond. grp contains conditions that do not match the expense type ( WB2B 080 )
Condition table &1 does not contain the trading contract number ( WB2B 081 )
The condition table is not defined for this condition ( WB2B 087 )
Enter purchasing and sales quantities ( WB2B 109 )
The selected documents are assigned to different status groups ( WB2B 114 )
Inconsistent currency information exists in item &1 ( WB2B 118 )
Condition type group & was not processed completely ( WB2B 120 )
Assignment of expenses type &1 to condition type group incomplete ( WB2B 121 )
Creation of follow-on documents is not defined for the trading contract & ( WB2B 122 )
The document must be released again ( WB2B 126 )
Copying from &1 to &2 is not defined ( WB2B 134 )
The field ( &1 ) can no longer be changed ( WB2B 138 )
Trading contract type &1 is blocked ( WB2B 139 )
Parameter &1 of the FM is not correct (see long text) ( WB2B 140 )
Required condition &1 is not created in the TC Customizing ( WB2B 148 )
This flag is already set for structure &1, field &2 ( WB2B 154 )
In Customizing, no field maintained as criterion for closing ( WB2B 155 )
The transaction in this document is not yet closed ( WB2B 156 )
Not all FI documents of this transaction are completely cleared yet ( WB2B 157 )
The status 'FI closed' is not defined for this contract type ( WB2B 158 )
The contract has not yet been approved ( WB2B 159 )
&1 &2 already delivered ( WB2B 160 )
Item &1 can no longer be deleted (delivery performed) ( WB2B 161 )
Set free-of-charge item ( WB2B 162 )
Set chargeable (standard) item ( WB2B 163 )
Follow on processing of Trading Contract &1 via TEW not supported ( WB2B 165 )
Follow on processing of Trading Contract &1 can be done only via TEW ( WB2B 166 )
Quantity smaller than quantity of follow-on documents. Check entry ( WB2B 167 )
Status 'closed' is not defined for contract type &1 ( WB2B 171 )
Contract will be closed (physical deletion no longer possible) ( WB2B 172 )
Contract can no longer be logically deleted (follow-up transactions) ( WB2B 173 )
TC &1 is not released and cannot be processed in the TEW ( WB2B 174 )
Maintain prices for current document item &1 ( WB2B 175 )
Changes to document flow for document &1 no longer possible ( WB2B 177 )
Expense documents exist for document &1. Deletion not possible ( WB2B 179 )
Creating with reference is not allowed for contract type &1 ( WB2B 181 )
Inconsistent business data exists. Check data for document &1 / &2 / &3 ( WB2B 191 )
NAST object key not filled correctly (internal error) ( WB2B 201 )
No address key could be determined for user name &1 ( WB2B 202 )
No suitable data found for the NAST object key (internal error) ( WB2B 203 )
Target group in NAST object key not correct (internal error) ( WB2B 204 )
The combination of TEW type &1 and TC type &2 is not possible ( WB2B2 043 )
Level in NAST object key not correct (internal key) ( WB2B 205 )
The determined address key is not complete ( WB2B 206 )
Address key does not allow print formatting for the address ( WB2B 207 )
No sales grouping exists ( WB2B 208 )
No message schema exists in the sales grouping ( WB2B 209 )
Batch is not possible; commodity items are assigned commodity ( WB2B2 092 )
No message schema for item messages in the sales grouping ( WB2B 210 )
No message schema exists in the trading contract type ( WB2B 211 )
No message schema for item messages in the contract type ( WB2B 212 )
No purchasing grouping exists ( WB2B 213 )
No message schema exists in the purchasing grouping ( WB2B 214 )
No message schema for item messages in the purchasing grouping ( WB2B 215 )
No information exists on the supplier ( WB2B 216 )
Error of BAdI &1 in spot &2 ( WB2B2 168 )
Error when accessing an internal table ( WB2B 217 )
No gaps in condition type specification allowed ( WB2B2 170 )
Shadow item &1|&2 belongs to a commodity item and cannot be canceled ( WB2B2 179 )
No information exists on the customer ( WB2B 218 )
Items with initial material cannot be assigned ( WB2B2 201 )
Materials of assigned items must be equal ( WB2B2 202 )
No output has been selected for printing ( WB2B 221 )
Washout quantities for sales items are unequal to purchase-side items ( WB2B2 243 )
Copy Control: Settings are not allowed --> see longtext ( WB2B2 263 )
Copy Control: Settings are not allowed --> see longtext ( WB2B2 267 )
Copy Control: Settings are not allowed --> see longtext ( WB2B2 268 )
Quantity greater than maximum quantity. Doc. &1, Item &2 Check your entry ( WB2B 228 )
Agri restriction ( WB2B2 301 )
Trading contract &1 has no TRM exposure data subject to explicit deletion ( WB2B2 334 )
No exposure relevant line items found ( WB2B2 337 )
Errors have occurred during processing of trading contracts ( WB2B2 338 )
Default status for incomplete TCs must be specified in status group ( WB2B2 345 )
Trading contract &1 still not released after release ( WB2B 280 )
Sales Pricing is not longer supported (see long text) ( WB2B 282 )
Creation with reference forbidden: Contract types have different sides ( WB2B 283 )
Legal control active for doc. &1, immediate release not possible ( WB2B 294 )
Legal control and immediate release not possible together ( WB2B 295 )
Internal error occurred ( WB2B 302 )
Order price UoM &1 of item &3 can no longer be changed ( WB2B 308 )
Field '&1' cannot be copied because it is not ready for input ( WB2B 311 )
Delete item & and do not assign deletion indicator ( WB2B 318 )
Different pricing types have been maintained for trading contract type ( WB2B 336 )
One-sided documents can only be copied with differing attributes ( WB2B 340 )
Billing document &1 still has an open differential invoice &2 ( WB2B 352 )
Sales quantity does not correspond to the rounding rules ( WB2B 386 )
Stock Transfer Order for contract type &1 not possible ( WB2B 391 )
Calculation schema &1, no gross price configurable for empties, item &2 ( WB2B 404 )
Different calculation procedures in &1 and &2 ( WB2B 409 )
Selection restricted to &1 hits ( WB2B 411 )
Sales Order Item Category &1 is not allowed for Sales order type &3 ( WB2B 421 )
Partner &1 was checked without organizational data ( WB2B 424 )
Copying from &1 to &2 is not defined for item category &3 ( WB2B 428 )
Release authorization: enter partner for Trading Contract &1 ( WB2B 434 )
Interface data for condition type &1 is inconsistent ( WB2B 450 )
Contract settlement requires class-based accounting document creation ( WB2B 451 )
No posting keys assigned to copy control entries for billing type &1 ( WB2B 453 )
Error during processing; check posting key &1 ( WB2B 454 )
Multiple Partners exist for Partner role &1: changes are not possible ( WB2B 458 )
Application Status &1 on TC &3 is not defined in Status Group &2 ( WB2B 462 )
Schedule items of item &1 are not transferred to outline agreements ( WB2B 476 )
Creation with ref. forbidden: Contracts have different settlement purpose ( WB2B 497 )
&1 packages with &2 documents were processed (messages occurred) ( WB2B 502 )
Statistical data setup covering many documents (read long text) ( WB2B 506 )
Verify that a database index for Material and Batch exists for table WBHI ( WB2B 520 )
UoM &1 is a proportion/product UoM. Field &2 (purchase) ( WB2B 529 )
UoM &1 is a proportion/product UoM. Field &2 (sales) ( WB2B 530 )
Follow on processing of Tradong Contract &1 via TEW not supported ( WB2B 537 )
Follow on processing of Tradong Contract &1 can be done only via TEW ( WB2B 538 )
Sales side TRM update requires a sales-sided trading contract ( WB2B 544 )
Purchasing side TRM update requires a purchasing-sided trading contract ( WB2B 545 )
Item type for item &1/material &2 could not be determined ( WB2B 601 )
Structure &1 is not allowed for the definition of the changeable fields ( WB2B 603 )
Material &1 cannot be copied ( WB2B 608 )
JNet ActiveX Control is missing ( WB2B 677 )
No calculation types assigned to the items in your selection ( WB2B 770 )
No table entry for appl. &1, TC type &2, item categ. &3 and procedure &4 ( WB2B 844 )
Delivery date is in the past ( WB2BDOTCOM 300 )
Extractor &1 is not active ( WB2BW 003 )
BW is generally not active for Global Trade Management ( WB2BW 009 )
Flag for uploading data from position management to BW is not set ( WB2BW 010 )
Enter document number of (&1) less than or equal to (&2) ( WB2BW 011 )
Save the selection parameters in a variant (see long text) ( WB2BW 013 )
Run with name & does not exist (see long text) ( WB2BW 018 )
Run with name & already exists (see long text) ( WB2BW 019 )
Termination because time exceeded: &1 documents processed ( WB2BW 020 )
&1 packages with &2 documents were processed (messages occurred) ( WB2BW 021 )
Reconstruction of position management w. assoc. network was terminated ( WB2BW 022 )
Choose a CP monitor view ( WB2B_CPM_UI 005 )
Selection restricted to &1 trading contracts ( WB2B_CPM_UI 012 )
Enhancement setting “Add-Ons Active” is not active for all documents ( WB2B_CPM_UI 014 )
Deletion not possible; &1 assigned to matching group &2 ( WB2B_CS 711 )
Deletion not possible; &1 assigned to TC type &2 ( WB2B_CS 712 )
Document type &1 is not defined for expense processing ( WB2B_EXPENSE 001 )
The calculated line price is zero. Enter a larger value ( WB2B_EXPENSE 004 )
No expense type is defined for this combination ( WB2B_EXPENSE 005 )
No master conditions are defined for settl doc type &1 of suppl. bill doc ( WB2B_EXPENSE 006 )
Posting type &1 cannot be used for expense class &2 ( WB2B_EXPENSE 010 )
Internal category of posting type &1 has not been created ( WB2B_EXPENSE 012 )
Settlement document type &1 for supplier billing doc cannot be used here ( WB2B_EXPENSE 019 )
Invalid calculation type for quantity-dependent condition &1 ( WB2B_EXPENSE 020 )
Copy control for settlem. doc type &1 for suppl. bill doc is not defined ( WB2B_EXPENSE 021 )
Choose a calculation schema containing condition category 'd' ( WB2B_EXPENSE 022 )
Planned expenses from the trading contract are applied ( WB2B_EXPENSE 023 )
Expense processing is not possible ( WB2B_EXPENSE 028 )
Check business partner data before saving ( WB2B_EXPENSE 030 )
Settlement doc type &1 for suppl. bill doc does not post to a G/L account ( WB2B_EXPENSE 033 )
G/L account cannot be cleared with this posting key ( WB2B_EXPENSE 034 )
Set price copy control to pricing type D or G ( WB2B_EXPENSE 035 )
Condition &2 was not found in document &1 (Customizing error) ( WB2B_EXPENSE 037 )
Required condition type is missing ( WB2B_EXPENSE 038 )
Not all items are relevant for expense processing ( WB2B_EXPENSE 049 )
Not all items are relevant for expense processing in document &1. ( WB2B_EXPENSE 079 )
Document &1 planned expenses are not applicable for accrual processing ( WB2B_EXPENSE 081 )
Not all planned expenses from &1 are used;expense partner is not provided ( WB2B_EXPENSE 082 )
Master condition &1 cannot be determined;see long text ( WB2B_EXPENSE 083 )
Tax code cannot be determined for settlement document type &1 ( WB2B_EXPENSE 087 )
No expense type defined for account type &1 post type &2 expense class &3 ( WB2B_EXPENSE 088 )
Selected doucments have different organizational data ( WB2B_EXPENSE 097 )
Maintain Document Type starting from Y and Z ( WB2B_EXPENSE 123 )
Maintain Settlement Management Document Type starting from Y and Z ( WB2B_EXPENSE 124 )
Value entered in Settlement Management Doc Type does not exists in Domain ( WB2B_EXPENSE 125 )
Value entered in Settlement Management Doc Type exists for other entry ( WB2B_EXPENSE 126 )
Item relevancy determination type does not exist; see long text ( WB2B_IFW 000 )
Item relevancy determination type is invalid; check the settings ( WB2B_IFW 001 )
Access sequence is missing for application &1 and condition type &2 ( WB2B_IFW 002 )
Condition type not found in schema &1, step &2 ( WB2B_IFW 003 )
Time-dependent portfolio tables are not supported ( WB2B_IFW 004 )
Portfolio type &1 is not marked as IFW relevant for application &2 ( WB2B_IFW 005 )
Internal error occurred at &1 &2 &3 &4 ( WB2B_PROCESSING 000 )
Internal error occurred ( WB2B_TEW 001 )
Internal error occurred ( WB2B_TEW 002 )
Error in Customizing ( WB2B_TEW 006 )
Error in Customizing ( WB2B_TEW 007 )
Error in Customizing ( WB2B_TEW 008 )
Error in Customizing ( WB2B_TEW 009 )
Error in Customizing ( WB2B_TEW 010 )
Error in Customizing ( WB2B_TEW 011 )
Error in Customizing ( WB2B_TEW 012 )
Error in Customizing ( WB2B_TEW 013 )
Error in Customizing ( WB2B_TEW 014 )
Error in Customizing ( WB2B_TEW 015 )
Error in Customizing ( WB2B_TEW 017 )
Error in Customizing ( WB2B_TEW 018 )
Error in Customizing ( WB2B_TEW 019 )
No entry in Customizing ( WB2B_TEW 020 )
Error in Customizing ( WB2B_TEW 023 )
Error in Customizing ( WB2B_TEW 024 )
Error in Customizing ( WB2B_TEW 025 )
Error in Customizing ( WB2B_TEW 026 )
Error in Customizing ( WB2B_TEW 027 )
Error in Customizing ( WB2B_TEW 028 )
Error in Customizing ( WB2B_TEW 030 )
Internal error occurred ( WB2B_TEW 033 )
Error in Customizing ( WB2B_TEW 036 )
Error in Customizing for enhancement classes ( WB2B_TEW 046 )
Error in Customizing for enhancement classes ( WB2B_TEW 047 )
Error in Customizing for filter classes ( WB2B_TEW 048 )
Error in Customizing for filter classes ( WB2B_TEW 049 )
Error in Customizing for action classes ( WB2B_TEW 050 )
Error in Customizing ( WB2B_TEW 051 )
Error in Customizing ( WB2B_TEW 052 )
Error in Customizing ( WB2B_TEW 060 )
Document &1: No business scenario defined at header level ( WB2B_TEW 061 )
Error in Customizing ( WB2B_TEW 066 )
Error in Customizing for check classes ( WB2B_TEW 072 )
Error in Customizing for association check classes ( WB2B_TEW 073 )
Error in document flow to add-on document ( WB2B_TEW 090 )
Trading contract &1 was changed after it was released ( WB2B_TEW 091 )
Item &1: Creation of purchasing configuration not allowed ( WB2B_VC 001 )
Internal error occurred while calling function module &1 ( WB2B_VC 002 )
Configuration not allowed for item category &1 ( WB2B_VC 005 )
Internal error occurred ( WB2C 003 )
Reversal for settlement date &1 of contract &2 not allowed, see long text ( WB2R 052 )
Settlement for &1 already created. New Date &2 not allowed ( WB2R 055 )
Target Field &1 does not exist in structure &2 ( WB2R 059 )
Error in determination of next date from &1 in calendar &2 (contract &3) ( WB2R 060 )
No business volume selection criteria maintained ( WB2R 071 )
No inclusive entry in business volume selection criteria ( WB2R 072 )
No exclusive entry in business volume selection criteria ( WB2R 073 )
Field combination supplier missing in contract type &1 ( WB2R 074 )
Field combination customer missing in contract type &1 ( WB2R 075 )
Field combination plant missing in contract type &1 ( WB2R 076 )
The field combination &1 has to have exactly one field ( WB2R 077 )
Generated delta settlement date &1 from calendar &2 already used ( WB2R 096 )
Final settlement date &1 has more (&2) delta dates than allowed (&3) ( WB2R 098 )
Settlement Doc &1 but not &2 is reversed for settlement date &3 of &4 ( WB2R 106 )
No settlement date exists for the valid-to date &1 of the contract ( WB2R 109 )
Internal error: Not all partial settlements could be distributed ( WB2R 111 )
Internal error: Not all accruals could be distributed ( WB2R 112 )
Accruals Reversal &1 has to be reversed first for contract &2 ( WB2R 119 )
Manual settlement for contract type &1 only allowed for proforma settl ( WB2R 133 )
Manual settlement for contract type &1 only alloed for non-auto settl ( WB2R 134 )
Close not possible, accruals exist for document &1. Use Reversal instead. ( WB2R 138 )
No field for material assigned for unit conversion ( WB2R 147 )
No corresponding field combination with material group for &1 ( WB2R 151 )
No corresponding field combination with customer for &1 ( WB2R 152 )
Settlement Type Supplier &1 not allowed for contract type &2 ( WB2R 153 )
Settlement Type Customer &1 not allowed for contract type &2 ( WB2R 154 )
Manual Settlement for Date Type Delta Accruals is not allowed ( WB2R 164 )
Change to multiple settlements for date &1 not allowed. ( WB2R 165 )
No corresponding fieldcombination for &1 for explosion from &2 to &3 ( WB2R 183 )
Accruals reversal not allowed for correction with multiple dates ( WB2R 187 )
Delta Accruals (&1) are not allowed for correction with multiple dates ( WB2R 188 )
Accruals from Settlement not allowed for correction with multiple dates ( WB2R 189 )
Accruals reversal not allowed for partial correction on &1 ( WB2R 190 )
Document &1 cannot be archived, contract &2 not ready for archiving ( WB2R 204 )
Posting Rule for Accruals Deferral missing ( WB2R 205 )
Indicator for Accruals Deferral not selected in posting rule &1 ( WB2R 206 )
Contract &1 cannot be archived. Settlement document &2 is not archived ( WB2R 215 )
Next settlement &1 after delta accruals &2 already performed ( WB2R 218 )
Next settlement &1 after accruals deferral &2 already performed ( WB2R 219 )
Notification provider '&1' inactive ( WB2R 236 )
Follow-On Documents from Contract Settlement cannot be closed ( WB2R 239 )
Customer &1 is different from customer &2 assigned to supplier &3. ( WB2R 255 )
Supplier &1 is different from supplier &2 assigned to customer &3. ( WB2R 256 )
Partner type &1 of partner function &2 is not supported ( WB2R 346 )
The assignment cannot be deleted; sub-assignments exist ( WB2_ASGT 018 )
The new assignment quantity is negative ( WB2_ASGT 019 )
The current assignment is a sub-assignment of another assignment ( WB2_ASGT 020 )
&1 &2 are transferred back from the sub-assignment to its assignment ( WB2_ASGT 026 )
Distributed quantity of pricing aspect &2 is too large ( WB2_ASGT 032 )
The assgmt distribution is not changeable; pricing aspect &2, Counter &3 ( WB2_ASGT 035 )
The shadow item cannot be deleted; assignments exist ( WB2_ASGT 037 )
The shadow item is not yet locked ( WB2_ASGT 039 )
No distribution for pricing aspect &2 and counter &3 of the assignment ( WB2_ASGT 045 )
The shadow item cannot be changed ( WB2_ASGT 049 )
Quantity &1 &2 is transferred from an assignment to another assignment ( WB2_ASGT 056 )
The shadow item has an initial UoM for the assignments ( WB2_ASGT 075 )
Pricing aspect &1, count &2: different UoM for the assignment ( WB2_ASGT 078 )
Assignment cannot be canceled; sub-assignments exist ( WB2_ASGT 093 )
Both involved shadow items have different commodity item categories ( WB2_ASGT 106 )
Trading Contract &1 does not allow creation of invoices for settlement. ( WB2_SE_INVC_AGENCY 202 )
Invoice refers to TC with different sides (sales / purchase) ( WB2_SE_INVC_AGENCY 207 )
Invoice refers to TC with different settlement process types ( WB2_SE_INVC_AGENCY 209 )
Data inconsistency: settl. management document &1 does not exist ( WB2_SE_INVC_AGENCY 227 )
Data inconsistency: settl. mgmt document &1 does not exist ( WB2_SE_INVC_AGENCY 230 )
Home currency could not be determined; see long text ( WB2_SE_TRO 029 )
Errors occurred when creating the assortment list version ( WB 300 )
Assortment lists IDoc &1 has not been created ( WB 301 )
Version cannot be created: dynamic reduction was used ( WB 302 )
No assortment list with structure &1 exists for this data ( WB 730 )
Version &1 is acive and cannot therefore be deleted ( WB 795 )
Version &1 cannot be copied ( WB 796 )
Fields &1, field &2, and field &3 cannot be selected in &4 ( WB 797 )
Version 0000 cannot be deleted ( WB 799 )
Data for customer & is incomplete ( WB 801 )
No fields selected for update ( WB 802 )
Layout module &1 is not assigned to layout &2 ( WB 803 )
No documents are assigned to layout module &1 ( WB 804 )
Data for space management is incomplete ( WB 806 )
Fill in all required entry fields ( WB 807 )
Layout module &1 is not assigned to customer &2 ( WB 808 )
The import table does not contain any materials ( WB 809 )
No layout is assigned to customer &1 ( WB 810 )
No data exists for selection variant &1 of info structure &2 ( WB 811 )
Material group &2 is not assigned a requirement group at customer &1 ( WB 812 )
No materials are listed or on sale ( WB 813 )
The document path for the layout module version &1 is missing ( WB 816 )
The Customizing fields have the wrong domains ( WB 817 )
Customer &1 is not the reference customer for layout module &2 ( WB 818 )
Errors occurred during dynamic reading of info structure &1 ( WB 819 )
Space management profile & does not exist ( WB 820 )
Description for profile &1 in language &2 does not exist ( WB 821 )
Selection variant & for space management does not exist ( WB 822 )
Selection variant &1 does not contain any fields ( WB 823 )
Field &1 is not included as a return value in selection variant &2 ( WB 824 )
Field names are not maintained for either the bus. vol. quantity or value ( WB 825 )
Articles are still assigned to layout module &1 ( WB 826 )
Profile & successfully checked, selection variants initialized ( WB 827 )
Material &1 is not listed or on sale in plant &3 at time &2 ( WB 828 )
Field &1 is not contained as a selection field in variant &2 ( WB 829 )
Error in dynamic call of function module & ( WB 830 )
Microsoft Excel could not be started by OLE ( WB 831 )
Errors occurred when creating the layout module ( WB 833 )
Errors occurred when deleting the layout module ( WB 834 )
Errors occurred when changing the layout module ( WB 835 )
Fields &1 and &2 are not selection fields in variant &3 ( WB 836 )
No reference customer is assigned to layout module &1 ( WB 837 )
No space management profile is assigned to customer &1 ( WB 838 )
Material group &2 is not assigned to customer &1 ( WB 839 )
No valid sites were selected ( WB 841 )
No plants found ( WB 842 )
Class &1 not found in class type &2 ( WB 843 )
Errors occurred when deleting the layout module version ( WB 844 )
Errors occurred when changing the layout module version ( WB 845 )
Errors occurred when creating the layout module version ( WB 846 )
No version exists for layout module &2 for date &1 ( WB 850 )
Data for selection variant &1 of info structure &2 is not complete ( WB 851 )
No valid version exists for layout module version &1 ( WB 852 )
Errors occurred when listing the imported materials ( WB 853 )
Layout module &1 already exists ( WB 855 )
Make only one selection ( WB 856 )
Do not select all customers or no customers simultaneously ( WB 857 )
No valid layout module assignments exist for material &1 on date &2 ( WB 858 )
Material &1 is not available in SAP ( WB 859 )
No documents exist for layout module versions ( WB 861 )
Errors occurred when generating the tree control ( WB 863 )
Errors occurred when generating listing conditions ( WB 864 )
No listing conditions were generated ( WB 865 )
No future version exists for layout module &1 ( WB 871 )
No variants exist for version &2 of layout module &1 for customer &3 ( WB 874 )
Version &1 of layout module &2 already exists ( WB 876 )
The structures you have selected do not use the same layout module ( WB 877 )
Layout module &1 already exists ( WB 879 )
Description &1 for layout module &2 already exists in language &3 ( WB 880 )
A variant is already assigned to customer &1 ( WB 881 )
Variant &1 does not exist for version &2 of layout module &3 ( WB 883 )
Layout module variant is not assigned to the assortment ( WB 885 )
Layout module version &1 overlaps with version &2 ( WB 886 )
Error in space management profile &1 ( WB 892 )
Status cannot be changed ( WB 893 )
Choose a layout module variant ( WB 894 )
Error occurred when deleting the layout module assignment ( WB 895 )
Do not run listing checks and listing simultaneously ( WB 899 )
The CCMS performance reports cannot be used ( WBA_CCMSBI 000 )
There is no BI client in this system ( WBA_CCMSBI 001 )
The BI content add-on was not installed ( WBA_CCMSBI 002 )
The current BI content version (&1, SP &2) is inappropriate ( WBA_CCMSBI 003 )
Authorization check in BI: &1 ( WBA_CCMSBI 004 )
System setting: &1 ( WBA_CCMSBI 005 )
Transport setting:&1 ( WBA_CCMSBI 006 )
BI basic settings: &1 ( WBA_CCMSBI 008 )
Authorization check in CEN: &1 ( WBA_CCMSBI 009 )
There is no RFC destination for BI sytem &1 client &2 ( WBA_CCMSBI 010 )
RFC destination &1 does not work ( WBA_CCMSBI 013 )
The required BI content is incorrect or incomplete ( WBA_CCMSBI 014 )
BI content activation prerequisites are not fulfilled ( WBA_CCMSBI 015 )
IT Performance Reporting is not yet active ( WBA_CCMSBI 017 )
No suitable RFC connection to system &1 is maintained in SMSY ( WBA_MESSAGES 020 )
URL for &2 on system &1 cannot be determined ( WBA_MESSAGES 056 )
BI Administration Tool cannot be reached on system &1 ( WBA_MESSAGES 062 )
URL for &2 on system &1 cannot be determined ( WBA_MESSAGES 064 )
No additional data exists for condition type & ( WBBY 106 )
User &1 is blocking the bonus buy history table ( WBBY_DEL 004 )
A system error occurred while locking the bonus buy history table ( WBBY_DEL 005 )
Customizing has not been maintained for HPR project ( WBB_HPR 100 )
Customizing for ALE has not been maintained (see long text) ( WBB_HPR 105 )
BDCP2 is not used to read change pointers ( WBB_HPR 106 )
Selection without material for plant &1; no DB index for field &2 ( WBEF_HYBRID 014 )
& ( WC 000 )
Errors occurred at POS outbound ( WC 001 )
No material could be found ( WC 002 )
No EAN reference was able to be selected ( WC 003 )
No recipient was able to be selected ( WC 004 )
No set materials could be selected ( WC 005 )
No follow-on items could be selected ( WC 006 )
No customer nos for sales org. & and dist. ch. & could be selected ( WC 007 )
You are not authorized to delete the specified log ( WC 009 )
No final correct transmission has taken place ( WC 011 )
Date as of which data is valid for POS system ( WC 023 )
Date to which data is valid for POS system ( WC 024 )
Deletion request for POS system ( WC 025 )
Debugging mode via status tracking of POS interface ( WC 026 )
Partner no. &, message cat. &: no FM name maintained in port defin. ( WC 027 )
Error opening trigger file & in directory & ( WC 028 )
Dummy initialization for customer number & was performed ( WC 029 )
Status reorganization of POS interface ( WC 030 )
Status reorganization of assortment list ( WC 031 )
Please enter a sales organization and distribution channel ( WC 032 )
No data available for these selection criteria ( WC 033 )
Date from which changes can be selected for the next realignment run (F1) ( WC 034 )
No bonus buys could be selected ( WC 037 )
Suppress deleting IDocs during reorganization ( WC 038 )
Promotional discounts should be sent to the POS system ( WC 039 )
No promotion could be selected ( WC 040 )
Latest merchandise supply to a store after how many days? ( WC 041 )
No material groups maintained ( WC 100 )
Error importing material group & ( WC 101 )
No set com. maintained for material & ( WC 102 )
Material group material & not properly maintained in material group & ( WC 103 )
No set material listed in the interval & to &, or material cannot be sent ( WC 104 )
No IDoc could be created for status ID & and item no. & ( WC 105 )
Material master could not be read ( WC 106 )
No R/3 Retail material master data for material &, sales unit & ( WC 107 )
Material &, sales unit &: material type & invalid ( WC 108 )
Material &, sales unit &: invalid material status & ( WC 109 )
No communication profile for store & maintained ( WC 110 )
Material &, sales unit &: no price found from & to & ( WC 111 )
Error converting unit of measure & ( WC 112 )
Error converting material group & ( WC 113 )
Error converting language code & ( WC 114 )
Error converting sales tax code & ( WC 115 )
Material & is not listed in interval & to & ( WC 116 )
No material listed in interval & to &, or material cannot be sent ( WC 117 )
No conditions maintained for material &, sales unit & for date & ( WC 118 )
Material & not maintained in material master ( WC 119 )
Sales unit & for material & not maintained in material master ( WC 120 )
No texts maintained for mat. &, sales unit & and lang. & in mat. master ( WC 121 )
No set components maintained for material & to date & ( WC 122 )
No material listed in interval & to &, or material cannot be sent ( WC 123 )
No follow-on item listed in interval & to &, or item cannot be sent ( WC 124 )
No EAN maintained for material & in sales unit & for date & ( WC 125 )
Material master could not be read ( WC 126 )
EAN not maintained for additional material & and sales unit & for date & ( WC 127 )
Material group &2 is not assigned to store &1 ( WC 128 )
Error converting condition type & ( WC 129 )
No components maintained for follow-on item & in sales unit & ( WC 130 )
No EAN maintained for set component & in sales unit & to date & ( WC 131 )
No comp. maintained for follow-on item & in sales unit & for date & ( WC 132 )
No EAN references maintained for material & in sales unit & ( WC 133 )
No currency maintained for store &, sales org, &, dist. ch. & and div. & ( WC 134 )
No exchange rate found for store & from & to & ( WC 135 )
No set material exists in material master ( WC 136 )
Exchange rate translation factors not properly maintained for store & ( WC 137 )
Error converting currency & ( WC 138 )
Error converting recipient no. & ( WC 139 )
No tax code maintained for country code & ( WC 140 )
No calculation schema maintained for country code & ( WC 141 )
Error converting tax code & ( WC 142 )
No customer data maintained for sales org. &, distribution channel & ( WC 143 )
Total credit limit for customer no. & not maintained in customer master ( WC 144 )
No texts maintained for mat. &, sales unit & and lang. & in mat. master ( WC 145 )
No material groups assigned to store & ( WC 146 )
No follow-on items exist in material master ( WC 147 )
Lead time for store & has not been maintained ( WC 148 )
No material listed in store &V1& ( WC 149 )
No bank details maintained for customer number & ( WC 150 )
No payment card information maintained for customer number & ( WC 151 )
No material group material defined for material group & ( WC 152 )
No log documentation defined for store & ( WC 153 )
Status ID & of this store not yet processed by sub-system ( WC 154 )
More recent POS outbound processing exists for store & ( WC 155 )
Communication profile for store & was deleted ( WC 156 )
End of period already in the past ( WC 157 )
Preparation for this store already been okayed ( WC 158 )
Material group &2 is not assigned to store &1 ( WC 159 )
Material group &2 is not assigned to store &1 ( WC 160 )
Material group & not assigned to store & for date & ( WC 161 )
Change message simulation: no database changes ( WC 162 )
Workflow Builder is not available ( WD 000 )
& canceled ( WD 002 )
Internal error & ( WD 004 )
Number object for WF object & not found ( WD 005 )
Number for WF object & cannot be generated ( WD 006 )
Method contains structure parameters and may not be used ( WD 007 )
Workflow Builder not available as ActiveX (starting network graphic) ( WD 014 )
Event cannot be deactivated ( WD 016 )
No start events or start transactions/forms ( WD 017 )
Container element & is for read purposes only. No values are assigned ( WD 018 )
Container element & is not used ( WD 019 )
Save the workflow before document templates are created ( WD 021 )
An active configuration exists for this workflow definition ( WD 022 )
The container does not contain a suitable element for the form data ( WD 029 )
The workflow has start transactions/forms but no agents ( WD 030 )
A configuration exists for this workflow definition ( WD 033 )
No expression entered for reference date/time for deadline monitoring ( WD 036 )
No free version found ( WD 037 )
Only alphanumeric Workflow Builder available ( WD 038 )
Graphical workflow log cannot be started ( WD 039 )
The ad hoc anchor does not contain any tasks ( WD 044 )
Reference of container element '&' was changed -> see long text ( WD 063 )
Workflow (&2) to be monitored already completed ( WD 064 )
(Local) event '&' already exists (choose another name) ( WD 067 )
Event for evaluating conditions is missing in basic data ( WD 088 )
Scenario & was loaded. Please use transaction SWDD_SCENARIO. ( WD 092 )
Workflow & was loaded in scenario editor. Please use SWDD. ( WD 093 )
Data type &1 cannot be deleted (uses parameter &2) ( WD 098 )
No steps found with the search criteria entered ( WD 111 )
Element &1 uses proxy structure &2; no support for changes ( WD 140 )
Specify object for event '&' ( WD 200 )
Installation error: Node type '&' not configured ( WD 201 )
Specify event for object '&' ( WD 202 )
Outcome not modeled for other values ( WD 206 )
Inconsistency found in '&' in the task definition ( WD 214 )
Task '&' is not fully defined ( WD 215 )
Task '&' changed since last processing ( WD 219 )
Internal error '&' occurred ( WD 220 )
Container definition has errors ( WD 229 )
Number of required branches is less than 1 ( WD 230 )
Fork must contain at least one branch ( WD 231 )
Number of required branches must be greater than 0 ( WD 232 )
Use a permitted task type (& is not valid) ( WD 233 )
Terminating events of task '&' not maintained fully ( WD 235 )
Specify an agent ( WD 237 )
Block structure of workflow definition is inconsistent ( WD 238 )
Workflow Builder cannot be started in CALL mode ( WD 242 )
Task '&' cannot be used as a decision task ( WD 243 )
Workflow definition '&' does not have to be translated ( WD 244 )
Workflow container does not contain any suitable elements ( WD 251 )
Insertion of workflow '&' aborted by system ( WD 252 )
Task '&' is not fully within the validity period of the workflow ( WD 260 )
Fork maintained inconsistently ( WD 262 )
Expression '&' is not a time ( WD 268 )
Expression '&' is not a date ( WD 269 )
Time interval for workflow start or work item start cannot be negative ( WD 270 )
Default values are used for the time ( WD 271 )
Not possible to create a new version in display mode ( WD 273 )
Control operation selected not allowed on step '&1' ( WD 275 )
Second parameter not applied in assignments ( WD 279 )
Object type '&1' not valid ( WD 280 )
Database error '&1' saving table '&2' ( WD 281 )
Database error '&1' deleting table '&2' ( WD 282 )
Generation of binding terminated with error ( WD 283 )
Task '&' has no agent assignment ( WD 287 )
Expression '&' has an invalid type or reference ( WD 288 )
Multiple line expression not permitted ( WD 289 )
Result element of container operation must be entered ( WD 290 )
Container element & is not multiline -> Appending not allowed ( WD 291 )
No further operations may take place while appending a table ( WD 292 )
No exception 'Processing obsolete' was modeled for step '&' ( WD 293 )
Deadlines active, without dealing with missed deadlines ( WD 295 )
More than five decision alternatives: User decision as list ( WD 300 )
Decision text longer than 50 characters: User decision as list ( WD 301 )
Import properties or export properties for container element & changed ( WD 302 )
The selected WF definition was created in a later release ( WD 304 )
Enter a condition ( WD 305 )
Time interval for workflow start or work item start cannot be negative ( WD 307 )
Database error '&1' reading table '&2' ( WD 311 )
When ref. date/time not equal to expression, time interval must be stated ( WD 321 )
Task does not reference any workflow versions ( WD 323 )
Select a version of the workflow definition ( WD 324 )
Workflow &1 currently being configured by user &2 -> Display only ( WD 325 )
Configuration for workflow & version & saved ( WD 326 )
Element '&' already exists ( WD 329 )
The document template specified no longer exists ( WD 340 )
This workflow definition does not have any document templates ( WD 341 )
Workflow not prepared for ad hoc agent assignment ( WD 343 )
This node violates the block structure required ( WD 344 )
Element '&' does not refer to the BOR object type WF_DOC ( WD 345 )
Rule & cannot be used for this function ( WD 346 )
The loaded version cannot be deleted ( WD 347 )
Task & locked by Workflow Builder, display only ( WD 348 )
Multistep task & is locked, but cannot be loaded ( WD 354 )
Ad-hoc anchor already overflowed - Ad-hoc enhancement not possible ( WD 357 )
Class '&' does not support any workflow program exit interface ( WD 360 )
Required condition 'complete execution' does not exist ( WD 368 )
Workflow definition could not be imported ( WD 369 )
Translation to language "&" is missing for step "&", output "&" ( WD 376 )
Outcome "&" has no ID. The outcome is ignored at runtime. ( WD 378 )
Outcome "&" is already defined for step "&". Property (&<>&) ( WD 379 )
Transfer format/group applied from proxy; see the long text ( WD 387 )
Function not allowed for step type chosen ( WD 393 )
No version selected. Use most recent version (if active)? ( WD 394 )
Workflow definition '&' not in version '&' ( WD 401 )
Workflow definition '&' cannot be activated ( WD 407 )
Multiline container element only allowed for an assignment ( WD 417 )
Function was canceled ( WD 418 )
Contents of clipboard cannot be moved ( WD 422 )
Selected command is not allowed for this node ( WD 428 )
Function was canceled ( WD 438 )
Requested operation is not possible on selected node '&' ( WD 440 )
Customizing data locked by another user ( WD 448 )
Number of parallel branches less than number of required branches ( WD 470 )
Not possible to reassign line for event '&' ( WD 471 )
The check produced '&' items of information '&' warnings '&' errors ( WD 474 )
Choose a valid line ( WD 475 )
Clipboard inconsistent ( WD 477 )
Table processing does not allow modeling of outcomes ( WD 483 )
Problems caused by number range object '&' ( WD 490 )
Binding definition contains errors ( WD 491 )
Internal program error: & & & & ( WD 499 )
Parameter & is a constant ( WD 500 )
Header change not applied to step description ( WD 501 )
New task selected, enter expression for task ( WD 503 )
Canceling a work item may terminate the Workflow ( WD 505 )
Single-step tasks cannot be inserted with this function ( WD 506 )
You defined & placeholders in title but assigned values to & parameters ( WD 507 )
Binding could not be defined automatically ( WD 508 )
Method '&' has dialog but task '&' is running in background ( WD 509 )
This workflow definition does not contain any subworkflow calls ( WD 514 )
Object type & does not support search for existing objects ( WD 521 )
Container element '&' does not refer to an object ( WD 522 )
Workflow & is not indicated as a review workflow ( WD 580 )
Important: Workflow 2.1 DELETED for Release 5.0 -> see long text ( WD 600 )
Template '&' created -> Maintain the task binding ( WD 705 )
Step container found without related step &. Delete? ( WD 715 )
Condition of step & found. This does not exist; do you want to delete it? ( WD 716 )
Condition of type & does not suit step &. Do you want to delete it? ( WD 717 )
Not possible to maintain data in current client & ( WE 054 )
The EAN category for the EAN & allows numeric entries only ( WE 066 )
Current EAN will be deleted; see long text ( WE 067 )
The previous EAN will be overwritten ( WE 068 )
You cannot change the EAN category for the EAN & ( WE 070 )
The interval & was not found ( WE 109 )
The interval & is not external ( WE 110 )
The number range object & is not defined ( WE 111 )
The interval & is not internal ( WE 112 )
You have specified an invalid EAN category ( WE 214 )
No internal number assignment defined for EAN category & ( WE 215 )
The EAN & may not be assigned externally ( WE 216 )
The EAN & is assigned to the EAN category & ( WE 217 )
The EAN & has an incorrect check digit ( WE 218 )
The EAN & has an invalid prefix ( WE 219 )
The last & figures of fresh produce EANs will be replaced with zeros ( WE 222 )
You have entered an invalid SAN ( WE 223 )
& currently blocked by user & ( WE 225 )
Position the cursor on a valid line ( WE 227 )
EAN already assigned to unit of measure as a main EAN ( WE 228 )
Select the future main EAN for unit of measure & ( WE 229 )
EAN & does not exist as an additional EAN ( WE 231 )
Check digit for EAN & cannot be determined ( WE 232 )
EAN cat.&: check digit will be created for EAN & poss.assigned internally ( WE 233 )
Specify a weight EAN prefix ( WE 301 )
Not possible to select the "Alphanumeric EANs" field here ( WE 302 )
Specify a 2- or 3-digit value for EAN prefix ( WE 303 )
Specify first digit in EAN prefix ( WE 304 )
Enter a numerical value ( WE 305 )
It is only useful to specify a length for numeric EANs ( WE 307 )
You are processing an EAN category with the UPC-E short format ( WE 308 )
EAN is in critical area of number range & & ( WE 710 )
Last EAN in number range & & has been assigned ( WE 711 )
Number range & not defined ( WE 712 )
A request for server & was sent to server &. Note 1364846 ( WEBDYNPRO_RT 021 )
Commit canceled; request is not XSRF-checked ( WEBDYNPRO_RT 025 )
You are already registered for changes in the browser history ( WEBDYNPRO_RT 027 )
Use only main window views for the registration ( WEBDYNPRO_RT 029 )
UI element &1 is disabled ( WEBDYNPRO_RT 032 )
Test message for F1 Help test. Variables & and & are specified ( WEBDYNPRO_TEST 003 )
Bank details need to be maintained, but this is not possible at present ( WEBFI_MASTER 281 )
Wrong admin. data for ServDef. &1 in field &2 actual '&3' exp. '&4' ( WEBI_CHECKS 001 )
Wrong value in VEPCROSSREF for Service Definition &1 ( WEBI_CHECKS 002 )
No value for &1 for Service Definition &2 operation &3 ( WEBI_CHECKS 003 )
No value for &1 for Service Definition &2 ( WEBI_CHECKS 004 )
Config. profile of Service Def. &1 contains unknown operation &2 ( WEBI_CHECKS 005 )
Config. profile of Service Def. &1 does not match available profiles ( WEBI_CHECKS 006 )
Config. profile of Service Def. &1 missing ( WEBI_CHECKS 007 )
Multiple values (&4) for &1 for Service Definition &2 operation &3 ( WEBI_CHECKS 009 )
Multiple values (&3) for &1 for Service Definition &2 ( WEBI_CHECKS 010 )
No active version of Service Definition &1 found ( WEBI_CHECKS 015 )
Service Definition &1 refers to not existing Service Interface &2 ( WEBI_CHECKS 016 )
Service Definition &1 refers to non existing Function Module &2 ( WEBI_CHECKS 017 )
Table &1 must not contain data for Proxy related Service Definition &2 ( WEBI_CHECKS 018 )
Serv. Def. &1, missing entry in table &2: &3 ( WEBI_CHECKS 026 )
Serv. Def. &1, wrong entry in table &2, expected '&3' actual '&4' ( WEBI_CHECKS 027 )
Serv. Def. &1, wrong unexpected entry in table &2: &3 ( WEBI_CHECKS 028 )
Serv. Def. &1 refers to non existing OTR text (concept &2) ( WEBI_CHECKS 029 )
Service Definition &1 refers to non existing operation &2->&3 ( WEBI_CHECKS 036 )
Serv. Def. &1 operation &2->&3 missing in table VEPFUNCTION ( WEBI_CHECKS 037 )
Consistency of Service Definitions ( WEBI_CHECKS 100 )
Consistency of Service Definitions (Administrative Data) ( WEBI_CHECKS 101 )
Consistency of Service Definitions (Where-Used List) ( WEBI_CHECKS 102 )
Consistency of Service Definitions (Soap Appl. Properties for Features) ( WEBI_CHECKS 103 )
Consistency of Service Definitions (Associated Functions) ( WEBI_CHECKS 104 )
Consistency of Service Definitions (Function Parameters) ( WEBI_CHECKS 105 )
Consistency of Service Definitions (Associated Type) ( WEBI_CHECKS 106 )
Consistency of Service Definitions (Structure Type) ( WEBI_CHECKS 107 )
Consistency of Service Definitions (Table Type) ( WEBI_CHECKS 108 )
Consistency of Service Definitions (Structure Type) ( WEBI_CHECKS 109 )
Consistency of Service Definitions (Elementary Type) ( WEBI_CHECKS 110 )
Consistency of Service Definitions (Exception of Function) ( WEBI_CHECKS 111 )
Consistency of Service Definitions (Elementary Type of SOAP Extension) ( WEBI_CHECKS 112 )
Consistency of Service Definitions (Table Type SOAP Extension) ( WEBI_CHECKS 113 )
Consistency of Service Definitions (Associated Functions of SOAP Ext.) ( WEBI_CHECKS 114 )
Consistency of Service Definitions (Field References) ( WEBI_CHECKS 115 )
Consistency of Service Definitions (OTR Texts) ( WEBI_CHECKS 116 )
Consistency of Service Definitions (OTR Texts - Strings) ( WEBI_CHECKS 117 )
Consistency of Service Definitions (UDDI Classifications SAP) ( WEBI_CHECKS 118 )
Consistency of Service Definitions (UDDI Classifications Customer) ( WEBI_CHECKS 119 )
Consistency of Service Definitions (Associated Type of SOAP Extension) ( WEBI_CHECKS 120 )
Consistency of Service Definitions (Associated VI SOAP Extension) ( WEBI_CHECKS 121 )
Customer is blocked; see long text ( WEB_PRICAT 018 )
RFC destination from CRM to ERP has not been maintained ( WEC_CHECK_MESSAGES 002 )
CRMSUBTAB is not maintained for object &1 / class &2 ( WEC_CHECK_MESSAGES 005 )
Attribute &2 of MDM site &1 is not maintained ( WEC_CHECK_MESSAGES 007 )
Business Function &1 in ERP system is not active ( WEC_CHECK_MESSAGES 015 )
No authority to perform remote checks for destination &1 ( WEC_CHECK_MESSAGES 018 )
No MDM-specific filter criteria maintained for BDoc type &1 ( WEC_CHECK_MESSAGES 024 )
Subscription &2 for BDoc type &1 has no site assignment ( WEC_CHECK_MESSAGES 025 )
Site &1 does not exist ( WEC_CHECK_MESSAGES 026 )
Site &1 is not an MDM site ( WEC_CHECK_MESSAGES 027 )
Publication for BDoc type &1 does not exist ( WEC_CHECK_MESSAGES 028 )
Adapter object &1 does not exist ( WEC_CHECK_MESSAGES 031 )
Adapter object &1 is inactive ( WEC_CHECK_MESSAGES 032 )
Adapter object &1 has no registered receiver modules (SMOFSUBTAB) ( WEC_CHECK_MESSAGES 033 )
Adapter object &1 has no assigned DB tables (SMOFTABLES) ( WEC_CHECK_MESSAGES 034 )
Adaptor object &1 has no suitable initial flow context ( WEC_CHECK_MESSAGES 035 )
Initial flow context for adapter object &1 is inactive ( WEC_CHECK_MESSAGES 036 )
Delta Load for class &1 is not active. ( WEC_CHECK_MESSAGES 037 )
Logical system has not been maintained ( WEC_CHECK_MESSAGES 039 )
MDM Connectivity is not active for the Delta Load ( WEC_CHECK_MESSAGES 041 )
MDM Connectivity is active for the Delta Load ( WEC_CHECK_MESSAGES 042 )
Industry flag is not set ( WEC_CHECK_MESSAGES 044 )
Function modules for BDoc type &1 not completely maintained ( WEC_CHECK_MESSAGES 045 )
Unexpected value &1 for industry flag ( WEC_CHECK_MESSAGES 046 )
Replication object for BDoc type &1 does not exist ( WEC_CHECK_MESSAGES 048 )
No subscriptions exist for BDoc type &1 ( WEC_CHECK_MESSAGES 050 )
MDM site &2 is not subscribed to BDoc type &1 ( WEC_CHECK_MESSAGES 051 )
ERP site &1 does not exist ( WEC_CHECK_MESSAGES 052 )
Site &1 is not an ERP site ( WEC_CHECK_MESSAGES 053 )
RFC destination for ERP site &1 is not maintained ( WEC_CHECK_MESSAGES 054 )
RFC destination &2 to ERP site &1 is erroneous ( WEC_CHECK_MESSAGES 057 )
Software component &1 is not installed in ERP system ( WEC_CHECK_MESSAGES 059 )
Version &2 of software component &1 in ERP is less than &3 ( WEC_CHECK_MESSAGES 060 )
No port assignment maintained for Bdoc segment &1 ( WEC_CHECK_MESSAGES 063 )
Port code is missing in assignment to BDoc segment &1 ( WEC_CHECK_MESSAGES 064 )
No priority is maintained for attribute &1 ( WEC_CHECK_MESSAGES 066 )
Attribute &1 has no master data record ( WEC_CHECK_MESSAGES 068 )
CRM site is not maintained ( WEC_CHECK_MESSAGES 070 )
Download for adapter object &1 was aborted ( WEC_CHECK_MESSAGES 071 )
Filter for adapter object &1 was changed after transfer ( WEC_CHECK_MESSAGES 072 )
Port code &2 for message &1 differs from default code &3 ( WEC_CHECK_MESSAGES 074 )
CRMSUBTAB in ERP is not maintained for object &1 / class &2 ( WEC_CHECK_MESSAGES 075 )
CRMSUBTAB in ERP for object &1 / class &2 with module &3 ( WEC_CHECK_MESSAGES 076 )
Item &1, type &1 cannot be changed; it is already assigned ( WER 363 )
Application of simple filter &2 on filter object &1 terminated ( WES_FILTER 001 )
Application of complex filter &2 on filter object &1 terminated ( WES_FILTER 003 )
Application of implicit filter &2 on filter object &1 terminated ( WES_FILTER 004 )
Filter object &2 is not assigned to application &1 ( WES_FILTER 010 )
Filter object &2 is not assigned to application &1 ( WES_FILTER 011 )
Filter object &1 is defined without a table or a filter ( WES_FILTER 012 )
No filters, but table &2 is assigned to filter object &1 ( WES_FILTER 013 )
Simple filters of filter object &2 are ignored in application &1 ( WES_FILTER 015 )
Message &1 was created (&2 data records) &3 &4 ( WES_OUTBOUND 009 )
Error during proxy call (&1: &2, &3) ( WES_OUTBOUND 015 )
Service implementation &1 is not completely defined ( WES_OUTBOUND 030 )
Service operation &1 is not completely defined ( WES_OUTBOUND 032 )
Authorization for application &1 and service implementation &2 missing ( WES_OUTBOUND 053 )
Filter &3 for service implementation &2 in application &1 is deactivated ( WES_OUTBOUND 056 )
No explicit filters are assigned to filter object &1 ( WES_OUTBOUND 058 )
No explicit filters are assigned to application &1 and filter object &2 ( WES_OUTBOUND 059 )
Implementing class &2 does not support filter object &1 ( WES_OUTBOUND 070 )
Message &1 with a data record was created &3 &4 ( WES_OUTBOUND 080 )
Message &1 with &2 data records was created &3 &4 ( WES_OUTBOUND 082 )
Status information for service implementation will be ignored ( WES_OUTBOUND 088 )
Error during start of a parallel task ( WES_OUTBOUND 096 )
No init. for appl. &1, serv.impl. &2, sales org. &3 and distr. channel &4 ( WES_OUTBOUND 101 )
No settings stored for application &1 and service implementation &2 ( WES_OUTBOUND 102 )
Status for appl. &1, serv.impl. &2 and dist.chain &3 could not be created ( WES_OUTBOUND 107 )
Customizing for condition document index not stored or incomplete ( WES_OUTBOUND 126 )
Customizing for condition document index not stored or incomplete ( WES_OUTBOUND 127 )
Deletion of promotion &1 does not need to be processed ( WES_OUTBOUND 303 )
Deletion of bonus buy &1 does not need to be processed ( WES_OUTBOUND 401 )
Bonus buy &1 uses features not supported by this service; Use &2&3 ( WES_OUTBOUND 416 )
Bonus buy uses features that are not supported by this service ( WES_OUTBOUND 418 )
Process is locked by another agent/session ( WF 007 )
System &:& does not allow workflow sharing ( WF 011 )
Process type is locked by another agent/session ( WF 012 )
Process type is locked by another agent/session ( WF 020 )
No further processing in state <&> ( WF 061 )
Unknown error when adding the object to correction & ( WF 062 )
Process type & does not belong to the error handler class ( WF 111 )
Program error during authorization check (RC=& in &) ( WF 851 )
Internal error occurred during authorization check (-->F1) ( WF 852 )
Worflow: DB error / inconsistency with '&' & & ( WF 899 )
Create work rule intervals for special day part rules only ( WFA 026 )
Default value must be between minimum value and maximum value ( WFA 028 )
Field symbol is not assigned (&1) ( WFA 063 )
Data cannot be changed by customer ( WFA 074 )
Records in group &1 and &2 overlap in time \&3 age ( WFA 083 )
No age-unrestricted record is flagged as default in group &1 ( WFA 084 )
Age-unrestricted record is flagged as default in group & ( WFA 085 )
One age-unrestricted group must have the default flag set ( WFA 086 )
Only one age-unrestricted group can be the default ( WFA 087 )
Age-restricted record is found in group &1 ( WFA 088 )
Minimum age specified in the age qualifier is too high for start date & ( WFA 090 )
Maximum age specified in the qualifier is too low for start date & ( WFA 091 )
Special age flag is not set for break rule set & at start time &1 ( WFA 092 )
Special age flag is not set for availability template &1 ( WFA 093 )
Special age flag is not set for work rule set &1 ( WFA 094 )
Validity period of age qualifier & ends too early ( WFA 095 )
Validity period of age qualifier & starts too late ( WFA 096 )
Validity period of break rule set & ends too early ( WFA 097 )
Validity period of break rule set & starts too late ( WFA 098 )
Validity period of break rule set & does not cover the required time ( WFA 099 )
Validity period of age qualifier & does not cover the required time ( WFA 100 )
Minimum age is too high for default settings group &1 with start &2 ( WFA 101 )
Maximum age is too low for default settings group &1 with start &2 ( WFA 102 )
Age qualifier is used in default settings group & with start date &1 ( WFA 103 )
Entry &1 is still used in a profile group ( WFA 123 )
End time is on the next day ( WFA 146 )
Profile &1 assigned to default settings group &2; cannot change currency ( WFA 152 )
Default value must be greater than or equal to &1 ( WFA 160 )
Default value must be less than or equal to &1 ( WFA 161 )
Week weight must be greater than or equal to 0 or less than or equal to 2 ( WFA 170 )
Default value must be greater than or equal to & ( WFA 260 )
Default value must be less than or equal to & ( WFA 261 )
Error in org. unit determination for personnel number &1 ( WFA_ABSENCE_IDOC 003 )
Deviation between total days (&1) and paid days (&2); data not saved ( WFA_ABSENCE_IDOC 013 )
Deviation between total hours (&1) and paid hours (&2); data not saved ( WFA_ABSENCE_IDOC 014 )
No data exists to archive based on the selection criteria ( WFA_CAS 500 )
Too many or too few values. Possibly due to daylight savings time change. ( WFA_FORECASTING 073 )
Failure in operation & on DB-table &. ( WFA_FORECASTING 092 )
Location &1 had errors during volume adjustment. See location for details ( WFA_FORECASTING 306 )
Location &1 had errors during workload adjustment. ( WFA_FORECASTING 307 )
Organizations have different week breakers, changes are not allowed ( WFA_FORECASTING 322 )
RFC connection to HCM system could not be established ( WFA_HR 034 )
Sub Type for HCM is not maintained in absence type table WFAC_ABSTYPE ( WFA_HR 035 )
Employee number could not be determined for partner &1 ( WFA_HR 036 )
No RFC destination maintained for the HCM system ( WFA_HR 037 )
No mapping to HCM sub types exist in table WFAC_ABSTYPE ( WFA_HR 039 )
WFM tables successfully updated from IDoc ( WFA_HR 048 )
&1: start date cannot be later than end date ( WFA_MULTI_CFG 000 )
Select an active org. unit for viewing ( WFA_MULTI_CFG 001 )
Profile ID already exists ( WFA_MULTI_CFG 002 )
Could not create the org. unit object for validation ( WFA_MULTI_CFG 003 )
Validation failed ( WFA_MULTI_CFG 004 )
No active org. units were found; could not copy ( WFA_MULTI_CFG 005 )
Select an org. unit to copy ( WFA_MULTI_CFG 006 )
Selection value & already exists; modify, then save again ( WFA_MULTI_CFG 007 )
& ( WFA_MULTI_CFG 008 )
Selected parameter is in use and could not be deleted ( WFA_MULTI_CFG 010 )
Transport was canceled ( WFA_MULTI_CFG 011 )
Select a row ( WFA_MULTI_CFG 012 )
Parent ID &1 is not valid; enter a valid parent ID, then save again ( WFA_MULTI_CFG 013 )
Parent ID does not have any selection values ( WFA_MULTI_CFG 016 )
Field & is a parent field and must be visible ( WFA_MULTI_CFG 017 )
Data will be saved automatically ( WFA_MULTI_CFG 019 )
Select a parameter ( WFA_MULTI_CFG 020 )
Select only one parameter ( WFA_MULTI_CFG 021 )
Select a parameter group ( WFA_MULTI_CFG 022 )
Select only one parameter group ( WFA_MULTI_CFG 023 )
View is in display mode ( WFA_MULTI_CFG 030 )
No recommended parameter group was found ( WFA_MULTI_CFG 034 )
Make only one selection for & ( WFA_MULTI_CFG 035 )
Could not save configuration detail information ( WFA_MULTI_CFG 038 )
Parameter groups &1 and &2 have the same start date ( WFA_MULTI_CFG 043 )
&1: multiple parameters may not have the same start date ( WFA_MULTI_CFG 044 )
Field does not have any selection values ( WFA_MULTI_CFG 048 )
Selected parameter group is still in use and could not be deleted ( WFA_MULTI_CFG 049 )
Selection value &1 already exists in &2 ( WFA_MULTI_CFG 051 )
&1 cannot contain overlapping &2 parameter groups ( WFA_MULTI_CFG 052 )
&1 must contain one &2 for all time periods ( WFA_MULTI_CFG 053 )
Org. units were saved; validation failed ( WFA_MULTI_CFG 054 )
Org. unit &2 must contain one &1 at all times ( WFA_MULTI_CFG 056 )
&1 cannot contain more than one parameter of this type per time frame ( WFA_MULTI_CFG 057 )
&1 must contain one and only one parameter of this type per time frame ( WFA_MULTI_CFG 058 )
&1: same parameters cannot be overlapped within the same time frame ( WFA_MULTI_CFG 059 )
&1 must have at least one parameter for all time intervals ( WFA_MULTI_CFG 060 )
Parameter group &1 was saved; validation failed ( WFA_MULTI_CFG 061 )
Parent field ID should be less than the child field ID ( WFA_MULTI_CFG 062 )
Selected org. unit is still in use and could not be deleted ( WFA_MULTI_CFG 063 )
Org. unit profile ID already exists, and could not be saved ( WFA_MULTI_CFG 064 )
Parameter &1 start date is later than parameter group assignment date ( WFA_MULTI_CFG 071 )
Define an org. unit profile ID for all org. units ( WFA_MULTI_CFG 072 )
Org. unit &1 was saved; validation failed ( WFA_MULTI_CFG 075 )
Overwrite values cannot be removed from the parameter ( WFA_MULTI_CFG 077 )
Overwrite values cannot be propagated from an org. unit ( WFA_MULTI_CFG 078 )
This parameter group type is already assigned to & ( WFA_MULTI_CFG 081 )
Assign at least one parameter before saving the parameter group ( WFA_MULTI_CFG 082 )
Could not insert data into table & line & ( WFA_MULTI_CFG 085 )
At most one of the six special day part rule types at a time: &1 and &2 ( WFA_MULTI_CFG 095 )
Department tag &1 is not valid ( WFA_MULTI_CFG 100 )
Department tag &1 is already in use ( WFA_MULTI_CFG 101 )
Data has been saved; transport request could not be created ( WFA_MULTI_CFG 107 )
Employee &1 is assigned to overlapping events (&2, &3) ( WFA_SCHED 152 )
Understaffing is expected in &1; demand exceeds maximum hours by &2 ( WFA_SCHED_ANALYSIS 000 )
Overstaffing is expected in &1; minimum hours exceed demand by &2 hours ( WFA_SCHED_ANALYSIS 001 )
Assign employee(s) to work area &1 ( WFA_SCHED_ANALYSIS 002 )
Assign a default settings group to employee &1, &2 ( WFA_SCHED_ANALYSIS 003 )
Assign a cost profile to employee &1, &2 ( WFA_SCHED_ANALYSIS 004 )
Assign break rules to employee &1, &2 ( WFA_SCHED_ANALYSIS 005 )
Assign a reluctance profile to employee &1, &2 ( WFA_SCHED_ANALYSIS 006 )
Assign schedule rules to employee &1, &2 ( WFA_SCHED_ANALYSIS 007 )
Assign employee &1, &2 to a work area ( WFA_SCHED_ANALYSIS 008 )
Enter a pay rate for employee &1, &2 ( WFA_SCHED_ANALYSIS 009 )
Enter a work area proficiency rating for employee &1, &2 ( WFA_SCHED_ANALYSIS 010 )
Understaffing is expected in workload &1 on &2 by &3 people between &4 ( WFA_SCHED_ANALYSIS 011 )
Understaffing expected in qual. wrkld. &1 on &2 by &3 people between &4 ( WFA_SCHED_ANALYSIS 012 )
Core coverage violation is expected in &1 on &2 by &3 people between &4 ( WFA_SCHED_ANALYSIS 013 )
Understaffing is expected in &1 on &2 by &3 hours ( WFA_SCHED_ANALYSIS 014 )
Overstaffing is expected in &1 on &2 by &3 hours ( WFA_SCHED_ANALYSIS 015 )
Understaffing is expected in &1; demand exceeds employee hours by &2 ( WFA_SCHED_ANALYSIS 016 )
Overstaffing is expected; employee minimum hours exceed demand &1 by &2 ( WFA_SCHED_ANALYSIS 017 )
Define a valid default settings group for employee &1, &2 ( WFA_SCHED_ANALYSIS 018 )
Define a valid cost profile for employee &1, &2 ( WFA_SCHED_ANALYSIS 019 )
Define valid break rules for employee &1, &2 ( WFA_SCHED_ANALYSIS 020 )
Define a valid reluctance profile for employee &1, &2 ( WFA_SCHED_ANALYSIS 021 )
Errors in function module &1 &2 &3 &4 ( WFCS 051 )
No entries from table &1 read &2 &3 &4 ( WFCS 052 )
No key tables for function module & transferred &1 &2 &3 ( WFCS 053 )
No customer (table T001W) &2 &3 &4 exists for plant &1 ( WFCS 055 )
No keys generated for accessing table &1 &2 &3 &4 ( WFCS 056 )
No forecasting data read for material &1 in plant &2 &3 &4 ( WFCS 057 )
Too little forecasting data for material &1 in plant &2 &3 &4 ( WFCS 058 )
No history for table WRFT was read &1 &2 &3 &4 ( WFCS 061 )
No master data found in table &2 for material &1 in plant &. &3 ( WFCS 065 )
&2 records fewer than requested were taken from table &1. &3 &4 ( WFCS 066 )
No/invalid historical values for material &1 in plant &2 &3 &4 ( WFCS 068 )
No forecast values calculated for material &1 in plant &2. &3 &4 ( WFCS 069 )
Error occurred when calling up user exit &1 ( WFCS 080 )
Invalid action in productive system ( WFCS 088 )
Posting error (table: &1; plant: &2) ( WFCS 089 )
Items posted (table: &1; plant: &2) ( WFCS 090 )
Items deleted (table: &1; plant: &2) ( WFCS 091 )
Posting error (table: &1) ( WFCS 092 )
Items posted (table: &1) ( WFCS 093 )
Items read (table: &1; plant: &2) ( WFCS 094 )
Items inconsistent (plant: &1) ( WFCS 095 )
Historical time series for plant &1 were completed. ( WFCS 096 )
Valid fiscal year variant &1 missing for posting period. &2 &3 &4 ( WFCS 100 )
Factory calendar &1 does not exist or is inactive &2 &3 &4 ( WFCS 103 )
Error updating time series buffer posting period, variant &1 &2 &3 &4 ( WFCS 106 )
No period total (PERAN=ANZPR=0) in forecast master data &1 &2 &3 &4 ( WFCS 108 )
Invalid aggregation mode ( WFCS 109 )
Error transferring data when calculating forecast requirements ( WFCS 111 )
Forecast results are only simulated ( WFCS 211 )
Forecast run for materials for plant &1 not carried out ( WFCS 217 )
Process for plant &1 was started (time stamp: &2) ( WFCS 221 )
Process waiting in &1 (&2 hh:mm:ss) ( WFCS 222 )
Processes started: &1/ start attempts: &2 ( WFCS 223 )
Parallel processing: Timeout for &1 (number: &2) ( WFCS 224 )
Serious system or communication error (number: &1) ( WFCS 225 )
Process for plant &1 finished (runtime: &2) ( WFCS 226 )
Personnel resource &1 cannot be assigned to item &2 ( WFDS_SGE 002 )
Tool resource &1 cannot be assigned to item &2 ( WFDS_SGE 003 )
Tool resource &1 cannot be used as tool &2 ( WFDS_SGE 004 )
No individual object exists for tool &1 (&2) ( WFDS_SGE 005 )
Action cannot be undone ( WFDS_SGE 006 )
Could not determine start time for the demand ( WFDS_SGE 008 )
Could not determine end time for the demand ( WFDS_SGE 009 )
Could not determine duration of the demand ( WFDS_SGE 010 )
Selected demand is not a service item relevant for resource planning ( WFDS_SGE 016 )
Resource &1 is not a personnel resource ( WFDS_SGE 018 )
Service process &1 cannot be assigned to resource &2 ( WFDS_SGE 025 )
Cannot determine a planning board profile ( WFDS_SGE 030 )
Assign &1 to a team as scheduler in time interval &2 - &3 ( WFDS_SGE 032 )
Resource &1 Number &2 not yet created in the WFM Core ( WFDS_SGE 034 )
Could not initialize resource &1 ( WFDS_SGE 036 )
Demand &1 is not available in the WFM Core ( WFDS_SGE 037 )
Order &1 is not consistent with resource planning ( WFDS_SGE 039 )
Assignment must match the validity of the team ( WFDS_SGE 045 )
Planning board was saved and updated successfully ( WFDS_SGE 048 )
Error while saving data ( WFDS_SGE 049 )
You are not authorized to edit the planning board for team &1 ( WFDS_SGE 050 )
You are not authorized to display the planning board for team &1 ( WFDS_SGE 051 )
You are not authorized to edit the planning board for orders ( WFDS_SGE 052 )
You are not authorized to display the planning board for orders ( WFDS_SGE 053 )
Error during the authorization check (authorization object &1) ( WFDS_SGE 054 )
Error in WFM Core; &1 &2 &3 ( WFDS_SGE 064 )
Resource &1 is overloaded from &2 to &3 ( WFDS_SGE 100 )
Resource &1 is not available from &2 to &3 ( WFDS_SGE 101 )
Assignment &1 violates link to resource &2 ( WFDS_SGE 102 )
Tool &1 is not scheduled with assignment &2 ( WFDS_SGE 105 )
Spare part demand &1 is not available for assignment &2 on &3 ( WFDS_SGE 106 )
Resources for demand &1 are not scheduled for the same time ( WFDS_SGE 107 )
Linked resources &1 and &2 for &3 are scheduled in different orders ( WFDS_SGE 108 )
Assignment &1 violates the link between &2 and &3 ( WFDS_SGE 109 )
Team &1 is overloaded from &2 to &3 ( WFDS_SGE 113 )
Team &1 does not have any capacity from &2 to &3 ( WFDS_SGE 114 )
Utilization of team &1 is &4% ( WFDS_SGE 115 )
First assignment for demand &1 starts before the earliest start date &2 ( WFDS_SGE 116 )
First assignment for demand &1 starts after the latest start date &2 ( WFDS_SGE 117 )
Last assignment for demand &1 ends before the earliest end date &2 ( WFDS_SGE 118 )
Last assignment for demand &1 ends after the latest end date &2 ( WFDS_SGE 119 )
Resource &1 does not have the qualifications required for assignment &2 ( WFDS_SGE 120 )
Total duration &2 of assignments f. demand &1 is too long (plnd dur. &3) ( WFDS_SGE 121 )
Total duration &2 of assignments f. demand &1 is too short (plnd dur. &3) ( WFDS_SGE 122 )
Total duration &2 of assignments f. demand &1 is too long (plnd dur. &3) ( WFDS_SGE 123 )
Total duration &2 of assignments f. demand &1 is too short (plnd dur. &3) ( WFDS_SGE 124 )
First assignment for demand &1 starts after the SLA start date &2 ( WFDS_SGE 125 )
Last assignment for demand &1 ends after the SLA end date &2 ( WFDS_SGE 126 )
Duration not entered for demand &1 for some assignments ( WFDS_SGE 127 )
Assignment &3 starts before assignment &1 &2 ends ( WFDS_SGE 130 )
Assignment &1 &2 ends after demand &3 is planned to start ( WFDS_SGE 131 )
Assignment &3 starts before demand &1 &2 is planned to end ( WFDS_SGE 132 )
Assignment &3 starts before assignment &1 &2 starts ( WFDS_SGE 134 )
Assignment &1 &2 starts after demand &3 is planned to start ( WFDS_SGE 135 )
Assignment &3 starts before demand &1 &2 is planned to start ( WFDS_SGE 136 )
Assignment &3 ends before assignment &1 &2 ends ( WFDS_SGE 138 )
Assignment &1 &2 ends after demand &3 is planned to end ( WFDS_SGE 139 )
Assignment &3 ends before demand &1 &2 is planned to end ( WFDS_SGE 140 )
Assignment &3 ends before assignment &1 &2 starts ( WFDS_SGE 142 )
Assignment &1 &2 starts after demand &3 is planned to end ( WFDS_SGE 143 )
Assignment &3 ends before demand &1 &2 is planned to start ( WFDS_SGE 144 )
Assignment &3 does not start at the same time as assignment &1 ( WFDS_SGE 146 )
Assignment &1 does not start at same time as demand &3 is plnd to start ( WFDS_SGE 147 )
Assignment &3 does not start at same time as demand &1 is plnd to start ( WFDS_SGE 148 )
Link &1 was changed by user &2 ( WFDS_SGE 200 )
Link &1 was deleted by user &2 ( WFDS_SGE 201 )
Assignment &1 was changed by user &2 ( WFDS_SGE 202 )
Assignment &1 was deleted previously ( WFDS_SGE 203 )
Time specification &1 was changed by user &2 ( WFDS_SGE 204 )
Time specification &1 was deleted previously ( WFDS_SGE 205 )
Resource &1 was edited by user &3 on &2 ( WFDS_SGE 206 )
Transaction &1 was processed by user &2 ( WFDS_SGE 207 )
Class &1 does not support interface /MRSS/IF_SGE_WL_ATT ( WFDS_SGE 700 )
Class &1 does not support interface /MRSS/IF_SGE_CHECK ( WFDS_SGE 701 )
Leave change mode before maintaining assignments ( WFDS_UI 846 )
Service Arrangement exists for business partner &1 ( WFD_BUPA 034 )
Problems determining agents for step &1 of &4 ( WFEA 001 )
Problems determining excluded agents ( WFEA 002 )
Notification agent for completion cannot be determined ( WFEA 003 )
Latest start: Recipient for missed deadline cannot be determined ( WFEA 004 )
Requested end: Recipient for missed deadline cannot be determined ( WFEA 005 )
Latest end: Recipient for missed deadline cannot be determined ( WFEA 006 )
Requested start: Deadline already passed at beginning of step ( WFEA 021 )
Latest start: Deadline already passed at beginning of step ( WFEA 022 )
Requested end: Deadline already passed at beginning of step ( WFEA 023 )
Latest end: Deadline already passed at beginning of step ( WFEA 024 )
Step &1 of &4: Binding from workflow to work item aborted ( WFEA 031 )
Step &1 of &4: Binding from work item to workflow aborted ( WFEA 032 )
Step &1 of &4: Binding from workflow to rule aborted ( WFEA 033 )
Event creator in &4: Binding from workflow to event aborted ( WFEA 034 )
Task not started ( WFEA 051 )
Workflow hanging ( WFEA 052 )
Overview of problems ( WFEA 100 )
&1: start date cannot be later than end date ( WFM_MULTI_CFG 000 )
Select an active org. unit for viewing ( WFM_MULTI_CFG 001 )
Profile ID already exists ( WFM_MULTI_CFG 002 )
Could not create the org. unit object for validation ( WFM_MULTI_CFG 003 )
Validation failed ( WFM_MULTI_CFG 004 )
No active org. units were found; could not copy ( WFM_MULTI_CFG 005 )
Select an org. unit to copy ( WFM_MULTI_CFG 006 )
Selection value & already exists; modify, then save again ( WFM_MULTI_CFG 007 )
& ( WFM_MULTI_CFG 008 )
Selected parameter is in use and could not be deleted ( WFM_MULTI_CFG 010 )
Transport was canceled ( WFM_MULTI_CFG 011 )
Select a row ( WFM_MULTI_CFG 012 )
Parent ID &1 is not valid; enter a valid parent ID, then save again ( WFM_MULTI_CFG 013 )
Parent ID does not have any selection values ( WFM_MULTI_CFG 016 )
Field & is a parent field and must be visible ( WFM_MULTI_CFG 017 )
Data will be saved automatically ( WFM_MULTI_CFG 019 )
Select a parameter ( WFM_MULTI_CFG 020 )
Select only one parameter ( WFM_MULTI_CFG 021 )
Select a parameter group ( WFM_MULTI_CFG 022 )
Select only one parameter group ( WFM_MULTI_CFG 023 )
View is in display mode ( WFM_MULTI_CFG 030 )
No recommended parameter group was found ( WFM_MULTI_CFG 034 )
Make only one selection for & ( WFM_MULTI_CFG 035 )
Could not save configuration detail information ( WFM_MULTI_CFG 038 )
Parameter groups &1 and &2 have the same start date ( WFM_MULTI_CFG 043 )
&1: multiple parameters may not have the same start date ( WFM_MULTI_CFG 044 )
Field does not have any selection values ( WFM_MULTI_CFG 048 )
Selected parameter group is still in use and could not be deleted ( WFM_MULTI_CFG 049 )
Selection value &1 already exists in &2 ( WFM_MULTI_CFG 051 )
&1 cannot contain overlapping &2 parameter groups ( WFM_MULTI_CFG 052 )
&1 must contain one &2 for all time periods ( WFM_MULTI_CFG 053 )
Org. units were saved; validation failed ( WFM_MULTI_CFG 054 )
Org. unit &2 must contain one &1 at all times ( WFM_MULTI_CFG 056 )
&1 cannot contain more than one parameter of this type per time frame ( WFM_MULTI_CFG 057 )
&1 must contain one and only one parameter of this type per time frame ( WFM_MULTI_CFG 058 )
&1: same parameters cannot be overlapped within the same time frame ( WFM_MULTI_CFG 059 )
&1 must have at least one parameter for all time intervals ( WFM_MULTI_CFG 060 )
Parameter group &1 was saved; validation failed ( WFM_MULTI_CFG 061 )
Parent field ID should be less than the child field ID ( WFM_MULTI_CFG 062 )
Selected org. unit is still in use and could not be deleted ( WFM_MULTI_CFG 063 )
Org. unit profile ID already exists, and could not be saved ( WFM_MULTI_CFG 064 )
Parameter &1 start date is later than parameter group assignment date ( WFM_MULTI_CFG 071 )
Define an org. unit profile ID for all org. units ( WFM_MULTI_CFG 072 )
Org. unit &1 was saved; validation failed ( WFM_MULTI_CFG 075 )
Overwrite values cannot be removed from the parameter ( WFM_MULTI_CFG 077 )
Overwrite values cannot be propagated from an org. unit ( WFM_MULTI_CFG 078 )
This parameter group type is already assigned to & ( WFM_MULTI_CFG 081 )
Assign at least one parameter before saving the parameter group ( WFM_MULTI_CFG 082 )
Could not insert data into table & line & ( WFM_MULTI_CFG 085 )
Department tag &1 is not valid ( WFM_MULTI_CFG 100 )
Department tag &1 is already in use ( WFM_MULTI_CFG 101 )
Data has been saved; transport request could not be created ( WFM_MULTI_CFG 107 )
Understaffing is expected in &1; demand exceeds maximum hours by &2 ( WFM_SCHED_ANALYSIS 000 )
Overstaffing is expected in &1; minimum hours exceed demand by &2 hours ( WFM_SCHED_ANALYSIS 001 )
Assign employee(s) to work area &1 ( WFM_SCHED_ANALYSIS 002 )
Assign a default settings group to employee &1, &2 ( WFM_SCHED_ANALYSIS 003 )
Assign a cost profile to employee &1, &2 ( WFM_SCHED_ANALYSIS 004 )
Assign break rules to employee &1, &2 ( WFM_SCHED_ANALYSIS 005 )
Assign a reluctance profile to employee &1, &2 ( WFM_SCHED_ANALYSIS 006 )
Assign schedule rules to employee &1, &2 ( WFM_SCHED_ANALYSIS 007 )
Assign employee &1, &2 to a work area ( WFM_SCHED_ANALYSIS 008 )
Enter a pay rate for employee &1, &2 ( WFM_SCHED_ANALYSIS 009 )
Enter a work area proficiency rating for employee &1, &2 ( WFM_SCHED_ANALYSIS 010 )
Understaffing is expected in workload &1 on &2 by &3 people between &4 ( WFM_SCHED_ANALYSIS 011 )
Understaffing expected in qual. wrkld. &1 on &2 by &3 people between &4 ( WFM_SCHED_ANALYSIS 012 )
Core coverage violation is expected in &1 on &2 by &3 people between &4 ( WFM_SCHED_ANALYSIS 013 )
Understaffing is expected in &1 on &2 by &3 hours ( WFM_SCHED_ANALYSIS 014 )
Overstaffing is expected in &1 on &2 by &3 hours ( WFM_SCHED_ANALYSIS 015 )
Understaffing is expected in &1; demand exceeds employee hours by &2 ( WFM_SCHED_ANALYSIS 016 )
Overstaffing is expected; employee minimum hours exceed demand &1 by &2 ( WFM_SCHED_ANALYSIS 017 )
Define a valid default settings group for employee &1, &2 ( WFM_SCHED_ANALYSIS 018 )
Define a valid cost profile for employee &1, &2 ( WFM_SCHED_ANALYSIS 019 )
Define valid break rules for employee &1, &2 ( WFM_SCHED_ANALYSIS 020 )
Define a valid reluctance profile for employee &1, &2 ( WFM_SCHED_ANALYSIS 021 )
Restrict your selection for reference module assignments ( WFRE_CON 221 )
Restrict your selection for reference modules ( WFRE_CON 222 )
Select kind of data for transfer ( WFRE_CON 223 )
Element name "&1" already used ( WF_CONT 001 )
"&1" is not a valid element name ( WF_CONT 002 )
Local ABAP Dictionary type for &1 is not actively available ( WF_CONT 003 )
Element &1 is a reserved word within the CDS view ( WF_CONT 026 )
Editor not available on front end used ( WF_CONT 049 )
Data type & not supported by workflow system ( WF_CONT 053 )
Invalid data type & - Choose a valid data type ( WF_CONT 054 )
Category & is not supported by the workflow system ( WF_CONT 069 )
Nested Tables Can Be Accessed Using Context Menu ( WF_CONT 114 )
The element chosen is not available ( WF_CONT 141 )
Element & cannot be saved ( WF_CONT 202 )
Client missing in header record, external requirement number & ( WG 000 )
Order type missing in header record, external requirement number & ( WG 001 )
No ISO currency code in header segment (general part) ( WG 002 )
External requirement number missing. Set IDoc number ( WG 003 )
Supplier/supplying plant missing. Supply source will be determined ( WG 004 )
IDoc segment & will not be analyzed ( WG 005 )
Qty not entered -> order item for & will be ignored ( WG 006 )
Order date missing in doc. header for req.no & . Today's date will be set ( WG 007 )
Delivery date in item & req. no & missing. Today's date will be set ( WG 008 )
Qualifier & in segment & is not supported ( WG 009 )
Empty identifier in segment & will be ignored ( WG 010 )
PO with no. & created ( WG 011 )
No purch. org. found. Req no. & for client &, store & ( WG 015 )
Wrong purch. org. & found in order header data for order & ( WG 016 )
No purchasing group in doc. header of store order & ( WG 017 )
Delivery date for material & cannot be found. Set system date ( WG 019 )
Default for document category & not valid. Value reset ( WG 020 )
Unit of measure for store order &, material & cannot be found ( WG 021 )
Unauthorized Customizing setting: &; Default value reset ( WG 022 )
Missing unit of measure cannot be found without material number or EAN ( WG 024 )
Material no. & does not exist ( WG 025 )
EAN & not found. Item cannot be identified ( WG 026 )
Req. no. &, item & not identified. No identifier found ( WG 027 )
Req. no. &, item &: doc. type, supplier and supplying plant not found ( WG 028 )
Item cat. & could not be decoded. Choose & ( WG 029 )
No supply source can be found for external req. no. &, material no. & ( WG 030 )
Create pur. req. without supply source. Req. &, item & ( WG 031 )
Different pur.org. found in supply source determination. Mat. no. & ( WG 032 )
Error & occurred in doc. processing ( WG 033 )
Error occured in update. No receiving plant entered ( WG 034 )
Errors occurred creating store order documents ( WG 035 )
Error calling dispatcher ( WG 039 )
Error buffering order items. Data will be lost if system crashes ( WG 041 )
Unknown dispatcher call ( WG 042 )
Supplier material number &1 for supplier &2 not found (Call: &3) ( WG 044 )
Supplier & entered = supplying plant &. This is not allowed ( WG 046 )
No document could be created for this item ( WG 047 )
No supply source could be determined for mat. no. & ( WG 048 )
Order processing cancelled for mat. no. & ( WG 049 )
Error creating error workflow (position &) ( WG 050 )
Parts of store order items not updated. See integrated inbox. ( WG 052 )
Unit sent & cannot be converted to a single SAP unit of measure ( WG 054 )
Unit & sent is not ISO unit or cannot be converted to a SAP unit ( WG 055 )
Supplying plant & and delivery type & do not match up ( WG 059 )
Only 002, 003 and 006 are allowed as qualifiers ( WG 060 )
Del. data cannot be derived for order &, material &, supplying plant & ( WG 061 )
Rounding off error occurred: Problem: &; Doc. &; Material & ( WG 062 )
Quantity rounded off: material &, qty requested was: & & ( WG 063 )
No availability check possible. Material &, supplying plant & ( WG 064 )
Goods not available. Mat. &, supplying plant &, & requested, & available ( WG 065 )
Delivery processing for material & terminated ( WG 066 )
No checking rule found for availability check. Supplying plant & ( WG 067 )
Messages could not be saved in table WPLST: Error: & ( WG 069 )
Order item not posted for external req. no. &, material & ( WG 070 )
Store order not deleted, as it was not found. Req.: &, error & ( WG 075 )
No entry in table "control store order" for customer &, profile & ( WG 076 )
No entry in table "Aggregate taxes". POS sales upload for profile & ( WG 077 )
Check for double PO not possible. Document &, document category & ( WG 081 )
Insert error & inserting in table WVFB2 with external req. no. & ( WG 085 )
No maximum order qty check possible. Material &, supplying plant & ( WG 086 )
No maximum order qty check possible. Material &, supplying plant &, Un & ( WG 087 )
Mat. & will be reordered for customer using Replenishment. Item ignored ( WG 096 )
Order item could not be processed for document item ( WG 102 )
Supplying plant cannot be determined. Customer &. ( WG 135 )
Document type contains errors. Change document cannot be determined! ( WG 145 )
Migration of condition change pointers has not yet taken place ( WG 150 )
Migration of condition change pointers has not yet taken place ( WG 151 )
Date cannot occur in the past ( WG 152 )
Change pointers that are still needed may be deleted ( WG 153 )
Condition change pointer (WIND) could not be updated ( WG 154 )
Condition change pointer (WIND) could not be deleted ( WG 155 )
None of the suppliers takes part in optimized PO-based load building ( WG 208 )
No entry found in plant master for plant &1 ( WG 212 )
Restriction profile & does not exist ( WG 216 )
Purchase orders were bundled under number & ( WG 217 )
Purchase orders could not be bundled, number range & does not exist ( WG 218 )
No free number in number range object & ( WG 219 )
The last number in number range object & has been assigned ( WG 220 )
Assigned number of number range object & is in critical area ( WG 221 )
System error in store order sub-function. Position & ( WG 222 )
System error combining purchase orders. Data was reset ( WG 223 )
Only collective number, supplier and plant are used for selection ( WG 228 )
Select a different processing mode ( WG 235 )
No info record found for the user entries ( WG 302 )
Selected plant must be a distribution center ( WG 303 )
Purchase order not created for supplier &1 &2 as one already exists ( WG 307 )
PO created for supplier/plant &1 &2, simulation cannot be deleted ( WG 309 )
Datea blocked by user &1. ( WG 311 )
The selected line has already been deleted by another user ( WG 313 )
PO value for purchase order & could not be determined correctly ( WG 314 )
Gross PO weight could not be correctly determined for purchase order & ( WG 315 )
PO volumes could not be correctly determined for purchase order & ( WG 316 )
PO quantity could not be correctly determined for purchase order & ( WG 317 )
Net PO weight could not be correctly determined for purchase order & ( WG 318 )
Not possible to assign a joint delivery date ( WG 319 )
Joint delivery date must be earlier than all delivery dates ( WG 320 )
Joint delivery date is in the past ( WG 321 )
Joint purchase order date too late ( WG 322 )
Joint purchase order date later than joint delivery date ( WG 323 )
Supplier &1, plant &2, &3 percent supplier service level. No load built! ( WG 334 )
General Customizing setting missing for auto. load building ( WG 349 )
Supplier service level &3 % for supplier &1, plant &2 greater than &4 % ( WG 355 )
Nothing for ordering, or purchase order has already been created ( WG 365 )
Use the new load building transaction WLB13 only. ( WG 367 )
Purchase order &1 is blocked by user &2 ( WG 368 )
Not all information exists that is required for order splitting ( WG 401 )
Errors withour detailed information on calling FM: &1 occurred ( WG 402 )
A minimum restriction is not met. Splitting not possible. ( WG 408 )
Split not possible, as only one item exists ( WG 411 )
Split not possible. Multiple restriction would not be met ( WG 415 )
Do not split collective purchase orders and allocation table POs ( WG 416 )
Delivery date occurs in the past ( WG 470 )
Processing of article &2 and site &3 failed because of other error items ( WG 474 )
You cannot reset values of an existing error ( WGDS_CC_2012 003 )
Select a valid line/field ( WGDS_CC_2012 006 )
Internal error in “Error Management" function; action aborted ( WGDS_CC_2012 007 )
Requested action or update of error not allowed ( WGDS_CC_2012 012 )
&1 message proposals are not shown in the result list ( WGDS_CC_2012 070 )
Error management is not active; execution stopped ( WGDS_CC_2012 071 )
Confirmation message &1 with status "Accepted" was sent successfully ( WGDS_CONFIRMATION 060 )
Confirmation message &1 with status "Synchronized" was sent successfully ( WGDS_CONFIRMATION 061 )
Confirmation message &1 with status "Rejected" was sent successfully ( WGDS_CONFIRMATION 062 )
Confirmation message &1 with status "Review" was sent successfully ( WGDS_CONFIRMATION 063 )
Confirmation for catalog &1, top-level GTIN &2, base GTIN &3 not sent ( WGDS_CONFIRMATION 132 )
Generic material &1 does not provide a grouping number for the variants ( WGDS_ENH 103 )
Choose a characteristics profile to get variant-creating characteristics ( WGDS_ENH 105 )
No variant-creating characteristics could be determined for &1 ( WGDS_ENH 106 )
No material group has been entered for characteristics profile &1 ( WGDS_ENH 107 )
Material group &1 has no characteristics profile assignments ( WGDS_ENH 108 )
Characteristics profile &2 is not assigned to material group &1 ( WGDS_ENH 109 )
No variant-creating characteristics could be determined for &1 and &2 ( WGDS_ENH 110 )
Incomplete characteristic value combinations found ( WGDS_ENH 115 )
Select at least one working line containing a single material ( WGDS_ENH 116 )
Some of the selected items have been removed ( WGDS_ENH 117 )
Characteristic values are not used uniquely ( WGDS_ENH 118 )
Incomplete generic material decriptions found ( WGDS_ENH 121 )
Characteristic values and generic material descriptions contain errors ( WGDS_ENH 126 )
Do not change the characteristic values of a converted variant ( WGDS_ENH 130 )
Not all data records for EAN &1 are selected (multiple validities) ( WGDS_ENH 132 )
You cannot exclude the base GTIN &1 ( WGDS_ENH_EMPTIES 010 )
Comp. &1 of struct. article has an empties BOM assigned; creation aborted ( WGDS_ENH_EMPTIES 012 )
VE-Processor not started due to incorrect results for mapping process ( WGDS_PROCESS 164 )
Processing of &1 orders, &2 orders/job in &3 tasks, ~&4 jobs (total) ( WGDS_PROCESS 654 )
Enter an application for the inbound proxy process ( WGDS_PROCESS 655 )
Enter an application for the postprocessing process ( WGDS_PROCESS 656 )
Order &1 is locked and cannot be processed ( WGDS_PROCESS 660 )
You are being forwarded to the new report &1 which replaces the report &2 ( WGDS_PROCESS 662 )
User &1 has no authorization to execute the selected mode ( WGDS_PROCESS 684 )
Model &1 version &2 is not ready for inferencing ( WGDS_PROCESS 751 )
Training data for model &1 is not ready to be downloaded ( WGDS_PROCESS 755 )
Cannot change processing state "&1" ( WGDS_STORAGE_BUS 084 )
Supplier table is empty; please click here to maintain GLN ( WGDS_SUBSCRIPTION 044 )
Customer table is empty.Please click on the help button to maintain GLN. ( WGDS_SUBSCRIPTION 045 )
No assignment exists for &1, plant &2, storage location &3, subrange &4 ( WGRC 015 )
Cannot determine warehouse number for plant &1/storage location &2 ( WGRC 022 )
You cannot reduce the data if orders exist ( WGRC 038 )
Select a door ( WGRC 065 )
Select a staging area ( WGRC 066 )
Cannot save empty table ( WGRC 068 )
Cannot delete assignments if activities exist ( WGRC 080 )
Cannot delete resources if activities exist ( WGRC 081 )
Customizing settings for utilization not defined for warehouse no. &1 ( WGRC 118 )
Deletion of resources: invalid selection criteria ( WGRC 155 )
EAN (&) not found. Item cannot be identified ( WH 000 )
Material &: no related document item exists ( WH 006 )
System error has occurred during blocking procedure ( WH 007 )
Physical inventory document & & blocked by another user ( WH 008 )
No items found for document & & ( WH 009 )
No entry could be read for customer number & ( WH 012 )
Internal communication profile for customer & could not be read ( WH 013 )
The zero count indicator has been set, but the quantity is larger than 0 ( WH 016 )
Document with ID &/&/&/ already posted (cannot be re-posted) ( WH 017 )
Currency & differs from local currency & ( WH 018 )
Field & is not filled. Item will not be processed ( WH 019 )
Sales value missing (mandatory entry for mats. managed on value basis) ( WH 020 )
Movement type or batch missing ( WH 021 )
The associated phy. inv. doc. item &/&/& has already posted ( WH 022 )
The associated physical inventory document item &/&/& will be recounted ( WH 023 )
The associated physical inventory document item &/&/& has been deleted ( WH 024 )
Qualifier & is not supported. Item cannot be identified ( WH 025 )
Sales value & for material &, count qty & determined as per conditions ( WH 026 )
Inconsistency: there are &2 active phy. inv. doc. items for material &1 ( WH 027 )
Phy. inv. doc. &/& does not exist or belongs to another plant/stor. loc. ( WH 028 )
Count date has not been entered ( WH 029 )
No items could be read for document &/& ( WH 030 )
The associated physical inventory document item has a different mat. no. ( WH 031 )
The associated phy. inventory doc. item has a different stock type ( WH 032 )
The associated phy. inventory doc. item has a different batch number ( WH 033 )
The physical inventory documents found could not be read ( WH 034 )
Exchange rate type for currency conversion missing ( WH 035 )
Units of measure in IDoc (&) and EAN (&) do not match ( WH 036 )
The zero count indicator has been set, but the SP value is larger than 0 ( WH 037 )
Value & in the fiscal year field is not numerical ( WH 038 )
Value & in the planned count date field is not a valid date ( WH 039 )
Value & in the count date field is not a valid date ( WH 040 )
Value & in the line number field is not numerical ( WH 041 )
ISO code & for units of measurement not found in system ( WH 042 )
Value &1 is too large ( WH 043 )
More than one SAP unit of measurement exists for ISO code & ( WH 044 )
Value & in the quantity field is not numerical ( WH 045 )
Value & in the sales value field is not numerical ( WH 046 )
Value & in the sales price or old sales price field is not numerical ( WH 047 )
ISO code & for currencies not found in system ( WH 048 )
More than one SAP currency code exists for ISO code & ( WH 049 )
The physical inventory document has & figures with leading zeros ( WH 050 )
Empty count date fields lead to error messages in upload processing ( WH 051 )
Error reading plant & ( WH 052 )
No ISO code defined for currency code & ( WH 057 )
No ISO code defined for unit of measure & ( WH 058 )
The individual materials could not be determined for value-only mat. & ( WH 059 )
Value & in the sales price unit field is not numerical ( WH 060 )
Value & in the date of price change field is not valid ( WH 061 )
Document contains items for physical inventory and revaluation ( WH 062 )
Date of price change missing ( WH 063 )
EAN & is not unique ( WH 064 )
Error occurred in storage location determination for plant & ( WH 065 )
Storage location has not been entered and cannot be found ( WH 066 )
Change reason missing in items ( WH 068 )
Movement type (or batch) &2 entered is wrong ( WH 069 )
Material data could not be read for material & ( WH 070 )
Error reading customer data for plant & ( WH 071 )
Error reading plant data for customer no. & ( WH 072 )
Error reading communication profile & (customer &) ( WH 073 )
No layout data for material & ( WH 074 )
Enter count for items without document reference ( WH 075 )
No suitable item found in physical inventory document entered ( WH 078 )
Enter an outbound intermediate document with message type & ( WH 079 )
New physical inventory document & created and count entered ( WH 080 )
Setting & not supported ( WH 081 )
System cannot determine POS currency for the store ( WH 082 )
System could not read POS currency ( WH 083 )
Special stock &1 is not supported ( WH 084 )
You must enter the supplier for special stock &1 ( WH 085 )
Entry of supplier not allowed ( WH 086 )
Storage loc. &1 does not exist in plant &2 ( WH 087 )
Associated physical inventory document item contains a different supplier ( WH 088 )
The quantity entered for material &1 was converted into the base unit ( WH 089 )
Check for zero stock only possible in current period ( WH 203 )
Withholding tax type &1 does not correspond to a unique tax line ( WHT_BR 004 )
Origin of base can only be set to Nota fiscal with Modified tax amount ( WHT_BR 020 )
No suitable tasks exist ( WI 116 )
The selected step cannot be displayed in the current client ( WI 127 )
Workflow &1 cannot be started ( WI 139 )
Error reading distribution list & ( WI 303 )
No workflow definitions based on object type &1 ( WI 724 )
No data relevant to labeling exists ( WJ 003 )
The structure &1 cannot be found in the Dictionary ( WJ 004 )
Incorrect price for material &1 in plant &2 ( WJ 005 )
A selection list will be issued to help limit the selection ( WJ 008 )
Also select already processed assortment list versions ( WJ 009 )
Spool parameters are displayed and can be changed ( WJ 010 )
The assignment to customer grp &1 and mat. group &2 is not consistent ( WJ 011 )
Additional &1 has not been created as a material ( WJ 200 )
Database error: additionals could not be deleted ( WJ 201 )
Database error: existing additionals could not be changed ( WJ 202 )
Database error: new additionals could not be added ( WJ 203 )
Current line &1 already exists in line &2: duplicated key ( WJ 204 )
Database error ( WJ 206 )
System error ( WJ 207 )
Class type & not maintained for additionals in Customizing ( WJ 210 )
Class & not found: correct your entry ( WJ 211 )
Material & is not an additional ( WJ 212 )
You must enter a bill-to party for the additional ( WJ 213 )
Unit of measure & not maintained for material & ( WJ 214 )
Procedure for additionals &2 is not allowed for additional &1 ( WJ 215 )
Additionals are not allowed for material category & (&) ( WJ 216 )
No more supplementary texts can be entered ( WJ 217 )
No class types maintained ( WJ 218 )
No class type entered ( WJ 219 )
No materials chosen ( WJ 220 )
Additionals not activated: see the long text ( WJ 222 )
Additionals cannot be assigned to a prepack ( WJ 223 )
Enter plant, customer or class ( WJ 227 )
Class type & and class & cannot be exploded ( WJ 228 )
No message category exists for additional & (material group &) ( WJ 229 )
No additionals are assigned to promotion & ( WJ 233 )
No material or plant data found for promotion & ( WJ 234 )
No additionals found for promotion & ( WJ 235 )
These plants are not defined for promotion & ( WJ 236 )
You have selected & materials; the upper limit is & ( WJ 238 )
Material & not listed in &; this combination will not be included ( WJ 239 )
Define a column for display ( WK 001 )
Entries cannot be displayed for current column selection ( WK 008 )
Grouping not maintained ( WK 014 )
Folder does not exist ( WK 027 )
Filter options were not changed ( WK 208 )
Configuration " & " is protected ( WK 217 )
Enter a new name ( WK 221 )
No active class exists in table < & > for folder < & > ( WK 224 )
Function not possible for the selected entries ( WK 300 )
Quarter was removed from display ( WK 503 )
Recalculation of quota executed (see long text) ( WK 509 )
Recalculation of quota is already running ( WK 510 )
Recalculation of quota scheduled, but job not released ( WK 512 )
The condition is too long altogether ( WK 602 )
Runtime handle of object type & could not be created ( WL 000 )
Method &2->&1 produced an error ( WL 001 )
Number of entries in checklist is not within permitted limits ( WL 002 )
Number of required checks is not within permitted limits ( WL 003 )
List with correct entries contains errors ( WL 004 )
List contains incorrect symbol for selecting entries ( WL 005 )
An unknown exception was raised at runtime (kernel ID: &1) ( WL 008 )
'&1' entries have been edited ( WL 010 )
Workflow clearing work successfully scheduled ( WL 012 )
Workflow clearing work executed ( WL 013 )
Error when scheduling work item error monitoring ( WL 015 )
Error when scheduling work item rule monitoring ( WL 016 )
Error when scheduling workflow clean-up work ( WL 017 )
Class & cannot be instantiated or interface & is not supported ( WL 020 )
No implementation found for log '&' ( WL 021 )
User & is not a permitted user for callback ( WL 022 )
Runtime system is stopped ( WL 039 )
No useable objects found ( WL 040 )
tRFC with errors: &1 ( WL 048 )
No errors occurred -> Details in long text ( WL 050 )
Monitoring -> Work Item:&1, Action:&2, Duration (ms):&3, Index:&4 ( WL 052 )
No errors have occurred -> Event details in long text ( WL 098 )
Error processing work item (Method &2->&1) ( WL 099 )
Expression & has data type reference & and not & ( WL 109 )
Error in & binding for element & ( WL 127 )
You have assigned an attribute of a multi-line element ( WL 132 )
Element & does not have a reference type (see container definition) ( WL 162 )
Error during input for element & ( WL 169 )
Please specify a value for element & using the input help ( WL 177 )
ActiveX not available (starting version without ActiveX...) ( WL 181 )
Error formatting workflow log ( WL 182 )
The workflow settings do not allow agent names to be displayed ( WL 211 )
The workflow in the remote system cannot yet be accessed ( WL 212 )
An error has occurred in this workflow - press F1 for more information ( WL 213 )
Error executing workflow log in remote system ( WL 216 )
The logon attempt in the remote system failed ( WL 217 )
No destination maintained for logon to remote system ( WL 218 )
Error in asynchronous start of work item display ( WL 228 )
All users can process this task ( WL 230 )
Work item &3 currently locked by user '&1' (&2) ( WL 241 )
You are not authorized to change the attachment ( WL 245 )
No modifiable attachments exist ( WL 246 )
You are not authorized to delete the attachment ( WL 250 )
No attachments that can be deleted ( WL 251 )
Work item number & is currently locked ( WL 262 )
End parallel branches: &2 of &3 necessary branches completed ( WL 307 )
Step no.&4 work item no.&3 workflow no.&2 '&1' - step processed ( WL 313 )
Node no.&4 work item no.&3 workflow no.&2 '&1' - node processed ( WL 314 )
Step no.&3 work item no.&2 workflow &1 - step type &4: Start ( WL 315 )
Confirmation from work item no. & probably canceled: runtime error? ( WL 319 )
Workflow no. & not started: Runtime error? ( WL 320 )
Background work item no. & could not be started: runtime error? ( WL 321 )
Background work item no. & has been running for more than 24 hours ( WL 322 )
Workflow &1 node &2: Multiline container element &3 overflow ( WL 324 )
Dynamic fork with &1 branches (multiline element &2) ( WL 325 )
End of dynamic fork ( WL 326 )
End of static fork (&1 of &2 necessary branches) ( WL 327 )
End of static fork (end condition is fulfilled) ( WL 328 )
The runtime data for join node &1 does not exist ( WL 364 )
Result of operation '& & &' is a time; type '&' not allowed ( WL 366 )
Result of operation '& & &' is a date; type '&' not allowed ( WL 367 )
Work item & (type '&', &) cannot be started immediately by user & ( WL 369 )
Restart Workflow &: Subworkflow & could not be restarted ( WL 372 )
Workflow & step &: Work item & for step & could not be completed ( WL 373 )
Fork from node & has not been released again yet ( WL 375 )
Inconsistent workflow definition: Join for fork node no. & not found ( WL 376 )
Inconsistent workflow definition: Node/step number & does not exist ( WL 377 )
Task & cannot be started immediately ( WL 378 )
No agent in '&' is allowed to process task & ( WL 379 )
Agent & in container element & is not permitted to execute task & ( WL 380 )
Expression '&' for task: Error during evaluation or incorrect data type ( WL 382 )
Illegal expression '&' for agent ( WL 383 )
Result of operation & & & is multiline ( WL 384 )
Workflow & no. & step &: Expression '&' is not a valid task number ( WL 385 )
ABAP data type '&V2&' is not allowed in a container operation ( WL 386 )
Result of operation '& & &' cannot be of type '&' ( WL 387 )
Element '&': Reference structure '&', field '&' not active in DDIC ( WL 388 )
Division by zero is not allowed (expression '&' has value 0) ( WL 389 )
Expression '&' does not contain a date or time or has errors ( WL 390 )
Maximum node number reached in process execution (endless loop?) ( WL 392 )
Response from work item &: Error writing to database table '&' ( WL 393 )
Workflow no. &: An error occurred in work item & (step no. &) ( WL 394 )
Workflow customizing incomplete: Default workflow administrator missing ( WL 395 )
Workflow '&' no. & step no. &: Error in expression '&' ( WL 401 )
Workflow '&' no. & step no. &: Error in expression '&' or '&' ( WL 402 )
Workflow '&': Workflow definition does not exist ( WL 403 )
Workflow '&': Workflow def. not activated/cannot be executed at present ( WL 404 )
Workflow '&': No data definition in workflow container ( WL 405 )
Maximum nesting level reached ( WL 406 )
Workflow '&' no. &: Workflow container already exists in database ( WL 407 )
Container element '&' not found in workflow container ( WL 408 )
Workflow '&' no. &: Element '_WF_Initiator' missing in workflow container ( WL 409 )
Workflow '&' step number &: work item could not be created ( WL 410 )
Workflow '&': No successor exists for CASE node & with value '&' ( WL 416 )
Workflow '&' number & cannot be set to state 'done' ( WL 417 )
Workflow '&' wait step no. & object &: Event '&' is not permitted ( WL 418 )
Workflow '&' wait step no. &: Object '&' for event '&' is missing ( WL 419 )
Workflow '&' wait step & object &: Element '&' not in container/empty ( WL 420 )
Error in resolution of rule '&1' for step '&2' ( WL 423 )
Workflow '&' step & index & could not be logged at &h ( WL 424 )
Workflow '&' number & step &: Container element '&' does not exist ( WL 426 )
Workflow '&' no& join node &(&): Related fork node not found ( WL 427 )
Workflow '&' number & container operation step &: Division by zero (&) ( WL 428 )
Workflow '&' container operation step &: Numeric value & or & too big ( WL 429 )
Workflow '&' no. & container operation step &: Element/parameter missing ( WL 430 )
Workflow '&' no& cancel step &: No work item for step/expression '&' ( WL 432 )
Workflow no. & cancel step &: Exception '&' at cancelation of work item & ( WL 433 )
Workflow 1 definition 2 (version 3) has no binding definition ( WL 435 )
Start workflow '&' no. & vers.&: SWP_HEADER could not be created ( WL 436 )
Workflow no. & step &: Event cannot be triggered ( WL 437 )
Workflow & no.& WI end & by event: Object '&' not in WI container ( WL 439 )
Workflow & wait step & (object '&' event '&'): Number of waits missing ( WL 441 )
Workflow & wait step &: Instead of object type '&', '&' expected ( WL 443 )
Workflow:&4 Work item:&2 Activity:&3 invalid ( WL 444 )
Workflow & feedback work item &: Workflow instance data not in database ( WL 445 )
Workflow &2 feedback from work item &1: Delete flag of WF instance is set ( WL 446 )
Workflow &2 feedback work item &1: Saved since workflow has stopped ( WL 447 )
Workflow & feedback work item &: Workflow definition not activated ( WL 448 )
Workflow definition &1 (&2) cannot be executed (task &3) ( WL 449 )
Workflow & feedback work item &: Could not be saved ( WL 450 )
Work item &: Repetition of & to workflow manager failed ( WL 452 )
Warning: No deadline message recipient (rule '&') for workflow & no. & ( WL 453 )
Warning: No administrator (rule '&1') for workflow &2 number &3 ( WL 454 )
Continuation of work item &: Terminating event or object not in container ( WL 456 )
Work item &: Deadline data could not be read ( WL 459 )
Workflow or work item no. & does not exist ( WL 460 )
Workflow or work item & not canceled ( WL 461 )
Termination of work item &: Notification of responsible user failed ( WL 462 )
Step &: Responsible agent '&' is not a possible agent of task & ( WL 465 )
Workflow & no. & activity & role '&': No active plan version ( WL 467 )
Workflow & no. & decision & has no title text in language '&' ( WL 469 )
Workflow & no. & activity & role '&': No agent found ( WL 470 )
WF definition no. & ID & end WI &: DB view SWP_V_HEA1 cannot not be read ( WL 471 )
Workflow & number & container operation step &: Operation '&' unknown ( WL 472 )
Workflow & arithmetic operation step &: '&' or '&' is not a number ( WL 473 )
Workflow & WI end & (event): Object '&' ID & in container more than once ( WL 474 )
Control command '&1' unknown ( WL 476 )
Confirmation of work item &3 flagged for later execution ( WL 477 )
Workflow &: Repair message for error && could not be created ( WL 478 )
Continuation of workflow &: work item & could not be unlocked ( WL 479 )
Workflow definition '&1' number &2 (&3) cannot be started at present ( WL 480 )
Workflow & no.& step &: See messages for evaluation of expression '&' ( WL 483 )
Step &: Deadline '&' on & at &. See message about deadline calculation ( WL 484 )
Workflow & No.&: Confirmation of work item & ignored ( WL 486 )
Confirmation from WI no.& ignored since workflow & no.& already completed ( WL 487 )
Report back from work item & recorded since workflow & is blocked ( WL 488 )
Report back could not be repeated since work item no. & is blocked ( WL 489 )
Operation '&' between data type '&' and '&' not allowed ( WL 490 )
Operator '&' not allowed or blank in expression '& & &' ( WL 491 )
Comparison cannot be evaluated since element/expression '&' has no value ( WL 492 )
Multiline container element not allowed in this operation ( WL 493 )
Error in container operation '& & &'; only '=' '<>' allowed on objects ( WL 496 )
Workflow & no.& step &: Error & found in workflow definition ( WL 497 )
Default values were applied ( WL 499 )
Runtime system Customizing data cannot be read ( WL 580 )
Runtime system Customizing data cannot be written ( WL 581 )
Runtime system Customizing being processed by user &1 ( WL 582 )
A system error has occurred in lock management ( WL 583 )
Error in archiving class WORKITEM ( WL 596 )
Error when scheduling work item deadline monitoring ( WL 597 )
Number range object & not found ( WL 601 )
Number could not be generated for number range object & ( WL 602 )
Express work item '&' with priority & received ( WL 603 )
Work item &: Not possible to delete callback flag ( WL 604 )
Work item & locked by user & (enqueue error) ( WL 605 )
Work item &: Not possible to set callback flag ( WL 606 )
Work item &: Workflow trace handle cannot be set ( WL 607 )
Work item &: Workfow trace handle cannot be deleted ( WL 608 )
Event & & for task & not defined as start/end event ( WL 610 )
Unable to copy instance linkages from work item & to & ( WL 611 )
Object type & from container element & is incompatible with type & ( WL 612 )
No text for type & in language & ( WL 613 )
No type texts in language & ( WL 614 )
No text for status & in language & ( WL 615 )
No status texts in language & ( WL 616 )
No text for function module & in language & ( WL 617 )
No texts for function modules in language & ( WL 618 )
Work item &: No reference to proxy work item entered ( WL 619 )
Work item &: Restart not possible in deactivated state ( WL 620 )
Work item &: Restart cannot be executed for type & ( WL 621 )
Work item &: Logical deletion not allowed for dependent work items ( WL 622 )
Work item &: Passing on note indicator to parent & failed ( WL 623 )
Work item &: Task & is asynchronous and requires a terminating event ( WL 624 )
Work item &: Immediate start after creation not possible ( WL 625 )
Requested start & & greater than inherited start time & & ( WL 626 )
Latest start & & greater than inherited start time & & ( WL 627 )
Requested end & & later than superordinate end deadline & & ( WL 628 )
Latest end & & later than superordinate latest end & & ( WL 629 )
Work item &: Object cannot be read after method execution & ( WL 630 )
Work item &: Notification of completion cannot be sent ( WL 631 )
Work item &: Notification of completion cannot be sent to all ( WL 632 )
Work item &: Error notification cannot be sent ( WL 633 )
Work item &: Error notification cannot be sent to all ( WL 634 )
Deadline monitoring changed from individual-case to periodic ( WL 635 )
Deadline monitoring changed from periodic to individual-case ( WL 636 )
Periodic deadline monitoring set to & minutes ( WL 637 )
Periodic deadline monitoring is switched off ( WL 638 )
Work item & is already late when being created (deadline status: &) ( WL 639 )
Counter for maximum number of retries changed ( WL 640 )
Counter for maximum number of retries not changed ( WL 641 )
Counter for maximum number of retries cannot be changed ( WL 642 )
Background job & for automatic restart cannot be generated ( WL 643 )
Background job & for automatic restart contains invalid job data ( WL 644 )
Background job & for automatic restart cannot be scheduled ( WL 645 )
Background job & for automatic restart cannot be executed immediately ( WL 646 )
Background job & for automatic restart cannot be completed ( WL 647 )
Background job & for automatic restart cannot be locked ( WL 648 )
Background job & for automatic restart scheduled and started ( WL 649 )
Administration information cannot be written for background job & ( WL 650 )
Administration information cannot be read for background job & ( WL 651 )
Background job & for automatic restart cannot be deleted ( WL 652 )
Log of background job & cannot be deleted ( WL 653 )
Steps of background job & cannot be deleted ( WL 654 )
Scheduling for background job & cannot be deleted ( WL 655 )
Background job & cannot be changed in the database ( WL 656 )
Background job & for automatic restart cannot be found ( WL 657 )
Background job & for automatic restart is currently active ( WL 658 )
No authorization to delete background job & ( WL 659 )
Administration information for background job & cannot be deleted ( WL 660 )
Background job & for automatic restart cannot be released ( WL 662 )
Background job & for automatic restart has multiple instances ( WL 663 )
Interval until next retry cannot be changed ( WL 664 )
Work item deadline monitoring scheduled successfully ( WL 666 )
Archive & cannot be opened in mode & ( WL 670 )
Archiving object & is unknown ( WL 671 )
System format cannot be established ( WL 672 )
Data compression failed for archiving class & ( WL 673 )
Data decompression failed for archiving class & ( WL 674 )
Conversion from code page & to & failed for archiving class & ( WL 675 )
Conversion of structure & has error when reading from archive (error &) ( WL 679 )
Work item & does not exist ( WL 680 )
Work item &: No document was passed ( WL 681 )
Document could not be sent ( WL 682 )
Document could not be put in the attachments of work item & ( WL 683 )
Info mail & could not be sent to recipient & ( WL 686 )
'Send mail' action not possible for work items of type & ( WL 687 )
Condition evaluation successfully scheduled ( WL 688 )
Transmission of error to associated proxy work item failed ( WL 691 )
Repetition of feedback to associated proxy work item not allowed ( WL 692 )
Displaying & in a separate window... ( WL 694 )
Object & under element & has & relationships using type & ( WL 699 )
Function was executed (&1 successfully, &2 with errors) ( WL 700 )
No authorization to select at least one of the defined views ( WL 701 )
Text variables could not be replaced in description text ( WL 703 )
No views defined ( WL 704 )
Error exiting a view or substitution ( WL 705 )
Error when reading selected views/applied substitutions ( WL 706 )
Error when inserting selected views or applied substitutions ( WL 710 )
Work item "&" cannot be replaced in status "&" ( WL 711 )
Work item "&" cannot be executed in status "&" ( WL 712 )
Work item "&" cannot be set to "Done" in status "&" ( WL 713 )
'Accept' function cannot be used ( WL 714 )
Processing can no longer be rejected for work item "&" ( WL 715 )
Resubmission of work item cannot be terminated ( WL 717 )
Work item "&" is already being processed by another agent ( WL 718 )
No notification agent determined - Forwarding not possible ( WL 719 )
Work item "&" cannot be forwarded in status "&" ( WL 720 )
Work items of type "&" cannot be forwarded ( WL 721 )
The priority cannot be changed for work items of type "&" ( WL 725 )
The priority cannot be changed for work items in status "&" ( WL 726 )
No relationships found in organizational model for user & ( WL 727 )
Work items of type "&" cannot be executed ( WL 728 )
Work items of type "&" do not have to be reserved ( WL 729 )
Work items of type "&" cannot be replaced ( WL 730 )
Work items of type "&" cannot be set to "Done" ( WL 731 )
Processing cannot be rejected for work items of type "&" ( WL 732 )
Processing cannot be rejected for work items in status "&" ( WL 733 )
Work items of type "&" cannot be changed ( WL 734 )
Work item &: Work item container could not be read ( WL 735 )
Container definition could not be read ( WL 736 )
Work item currently locked by user '&' ( WL 737 )
Work items cannot be changed in status "&" ( WL 738 )
Mass execution not possible due to different parameter structures ( WL 739 )
"Execute together" not possible: Input parameters not returned ( WL 740 )
No attachments that can be deleted ( WL 741 )
Error changing container for work item & ( WL 743 )
Attachments cannot be created for work items in status "&" ( WL 746 )
Attachments cannot be created for work items of type "&" ( WL 747 )
No attachments exist for work items of type "&" ( WL 748 )
Work item container references unsaved attachments ( WL 750 )
No modifiable attachments exist ( WL 752 )
Attachments cannot be changed for work items in status "&" ( WL 754 )
Attachments cannot be deleted for work items in status "&" ( WL 755 )
Objects cannot be created/added for work items in status "&" ( WL 758 )
Objects cannot be created/added for work items of type "&" ( WL 759 )
The specified date/time is in the past ( WL 760 )
No objects in work item container ( WL 769 )
No possible recipients found for the work item task ( WL 770 )
Error reading possible agents in organization model ( WL 771 )
Not possible to reject processing of work item & ( WL 772 )
No higher-level work item for this work item ( WL 778 )
No other recipients exist ( WL 789 )
No agents displayed (general task) ( WL 791 )
Resubmission date is invalid ( WL 793 )
The deadline chosen cannot be deleted ( WL 797 )
You do not have authorization for the selected function ( WL 800 )
Work item ID cannot be created ( WL 801 )
Status change from &1 to &2 is not allowed/possible ( WL 802 )
Work item & cannot be read ( WL 803 )
Status & is unknown ( WL 804 )
Table & cannot be read ( WL 805 )
Work item & cannot be deleted ( WL 806 )
Work item & cannot be changed in status & ( WL 807 )
Work item & cannot be executed in status & ( WL 808 )
Work item & cannot be reserved in status & ( WL 809 )
Work item & cannot be replaced in status & ( WL 810 )
Work item &: Priority & cannot be set ( WL 811 )
Work item &: Callback function module & cannot be set ( WL 812 )
Work item &: Work item text & cannot be set ( WL 813 )
Work item &: Status & cannot be set ( WL 814 )
Work item &: Language & cannot be set ( WL 815 )
Work item &: Deadline data cannot be set (table &) ( WL 816 )
Work item &: Deadline data cannot be deleted (table &) ( WL 817 )
Table & cannot be written ( WL 818 )
Initial status & is incompatible with requested start & & ( WL 819 )
Work item &: Task & cannot be read ( WL 820 )
Object '&1' method '&2' cannot be executed ( WL 821 )
Work item & cannot be resubmitted in status & ( WL 822 )
Work item &: Container element & cannot be read ( WL 823 )
Object & not found in container ( WL 824 )
Work item &: Object handle for object & cannot be created ( WL 825 )
Work item &: Container cannot be read ( WL 826 )
Work item &: Container cannot be written ( WL 827 )
Work item &: Work item or task & locked for execution ( WL 828 )
Work item &: Task & locked for instantiation ( WL 829 )
Work item &: Method & not allowed for type & ( WL 830 )
Work item &: Type & cannot be executed more than once ( WL 831 )
Work item type & not known ( WL 832 )
Work item &: Execution as reference work item not successful ( WL 833 )
Work item &: Execution as reference work item not allowed ( WL 834 )
Work item &: List for reference work item cannot be saved ( WL 835 )
Work item list does not contain any entries ( WL 836 )
Work item &: Linkage to object & event & cannot be written ( WL 837 )
Work item &: Lock for execution cannot be set ( WL 838 )
Work item &: Lock for execution cannot be deleted ( WL 839 )
The following agents cannot be determiend: & ( WL 840 )
Work item &: Agents of type & cannot be written ( WL 841 )
Work item &: Forwarding not allowed in status & ( WL 842 )
Work item &: Agents of type & cannot be deleted ( WL 843 )
Work item &: User & cannot reserve the work item ( WL 844 )
Work item &: Organizational assignment cannot be deleted ( WL 845 )
Work item &: Organizational assignment cannot be written ( WL 846 )
Work item &: Dependent work items cannot be read ( WL 847 )
Work item &: Resubmission on & & not possible ( WL 848 )
Work item &1: User &1 does not have authorization for this function ( WL 849 )
Work item &: Data for type & cannot be read (table &) ( WL 850 )
Work item &: Data for type & cannot be written (table &) ( WL 851 )
Work item &: Workflow data cannot be read ( WL 852 )
Work item &: Rejection not allowed ( WL 853 )
Time & is not valid (plausibility check not fulfilled) ( WL 854 )
Date & is not valid (plausibility check not fulfilled) ( WL 855 )
Requested start & & is not in the future ( WL 856 )
Latest start date & & is not in the future ( WL 857 )
Requested end date & & is not in the future ( WL 858 )
Latest end & & is not in the future ( WL 859 )
The callback function module must be set for work items of type E ( WL 860 )
Workflow definition for task & cannot be read ( WL 861 )
Work item &: Dependent work item & cannot be deleted ( WL 862 )
Notification of completion cannot be generated ( WL 863 )
Work item &: Background job & cannot be scheduled (error &) ( WL 864 )
Work item &: Background job & cannot be deleted (error &) ( WL 865 )
Requested start & & is later than latest start & & ( WL 866 )
Requested end & & is later than latest end & & ( WL 867 )
Requested start & & is later than requested end & & ( WL 868 )
Latest start & & is later than latest end & & ( WL 869 )
Work item &: Log cannot be deleted (table &) ( WL 870 )
Work item &: Note flag cannot be changed ( WL 871 )
Work item &: Error & & updating WFM header data ( WL 872 )
Work item &: Background job & cannot be changed (error &) ( WL 873 )
Work item & cannot be repaired in status & ( WL 874 )
Work queue &: Lines cannot be updated in blocks ( WL 875 )
Object & in work queue & cannot be displayed ( WL 876 )
Work queue & could not be split ( WL 877 )
Work queue & could not be copied ( WL 880 )
The line(s) could not be deleted ( WL 881 )
Action & does not exist ( WL 883 )
The corresponding work item & cannot be set to status & ( WL 884 )
Work queue & cannot be released internally ( WL 885 )
Work queue & cannot be executed ( WL 886 )
Work queue & cannot be displayed ( WL 887 )
Work queue cannot be created ( WL 888 )
Work queue & released ( WL 889 )
Work queue: Key of work queue line occurs twice ( WL 890 )
Work queue & cannot be deleted ( WL 891 )
Work queue &: Line could not be deleted (table: &) ( WL 892 )
Work queue & does not exist ( WL 893 )
Work queue: Line cannot be called again ( WL 895 )
Work queue & has not yet been released ( WL 896 )
Work queue: Line with ID & does not exist ( WL 897 )
Work queue & has status & - restart not possible ( WL 898 )
Work queue & with errors could not be restarted ( WL 899 )
Syntax error &1 in generated report &4 in line &2 (&3) ( WLC_PARALLEL 001 )
The text symbols for the generated report cannot be read ( WLC_PARALLEL 003 )
The text symbols for the generated report cannot be written ( WLC_PARALLEL 004 )
Internal error in &1 - return code &2 - message &3 ( WLC_PARALLEL 005 )
The necessary Customizing settings have not yet been made for report &1 ( WLC_PARALLEL 006 )
Input parameter &1 of function module &2 must be filled ( WLC_PARALLEL 007 )
Reading of selection options for report &1 led to error code &2 ( WLC_PARALLEL 008 )
Data preselection should use function module, but the name is missing ( WLC_PARALLEL 009 )
The type of data preselection is missing or incorrect (&1<-&2) ( WLC_PARALLEL 010 )
Funct. mod. &1 for data preselection of report &2 does not exist (RC:&3) ( WLC_PARALLEL 011 )
The header table for data selection for report &1 must be entered ( WLC_PARALLEL 012 )
The line table for data selection for report &1 must be entered ( WLC_PARALLEL 013 )
Enter at least 2 parallel jobs: &1 job is not enough ( WLC_PARALLEL 014 )
Enter a database field for determining the workload ( WLC_PARALLEL 017 )
Enter the database field in the form TABLE-FIELD ( WLC_PARALLEL 019 )
Table &1 for data preselection does not exist ( WLC_PARALLEL 020 )
The database field &1 for determining workload is not in &2 ( WLC_PARALLEL 025 )
Table &2 does not contain the values for workload and selection options ( WLC_PARALLEL 026 )
The field type &1 is not compatible with field &2 ( WLC_PARALLEL 027 )
No data was preselected. No worklist for report &1? ( WLC_PARALLEL 029 )
Routine &1 in report &2 was not found. Generation error ( WLC_PARALLEL 030 )
Event &1 could not be triggered ( WLC_PARALLEL 031 )
No input data/workload exists for distribution ( WLC_PARALLEL 032 )
Selection of table &1 is not restricted ( WLC_PARALLEL 034 )
The workload per job is not restricted ( WLC_PARALLEL 035 )
Maintain the table to be selected of parameter &1 (rep. &2) ( WLC_PARALLEL 037 )
Maintain the field to be selected of parameter &1 (rep. &2) ( WLC_PARALLEL 038 )
Selection option &1 (field &2) is filled to create parallel jobs ( WLC_PARALLEL 039 )
Values of &2 for select. option &1 are used to create parallel jobs ( WLC_PARALLEL 040 )
The two tables to be selected must be different (&1) ( WLC_PARALLEL 041 )
Syntax error &1 in the generated selection routines in line &2 (&3) ( WLC_PARALLEL 042 )
The FM &1 for the data preselection ended with undefined error ( WLC_PARALLEL 043 )
The values of the field &1 you chose create jobs ( WLC_PARALLEL 044 )
Field &1 in table &2 is not available ( WLC_PARALLEL 045 )
Job &1 completed ( WLC_PARALLEL 052 )
Report contains no selection options, therefore no parallel processing ( WLC_PARALLEL 053 )
Table TWPA not maintained, termination ( WM 000 )
Incorrect cursor position ( WM 001 )
Selection not allowed ( WM 002 )
You have not selected any nodes ( WM01 001 )
Assortment & does not exist in the tree ( WM01 002 )
No data was changed ( WM01 003 )
No assortment was selected for the chosen material groups ( WM01 006 )
No assortment was selected for the chosen plants ( WM01 007 )
A root node cannot be assigned to an assortment ( WM01 009 )
Sales organization and distribution chain must be selected together ( WM01 014 )
Plants cannot be assigned to the root nodes of the assortments. ( WM01 016 )
You can only select assortments ( WM01 017 )
No assortments were selected for the MG hierarchies (Error code &) ( WM01 019 )
Mass Change: Initialize POS outbound / assortment list ( WM01 036 )
Multiple assignment is not active => transaction cannot be executed ( WM01 037 )
Assignments already exist in the selection area ( WM01 043 )
Module & - technical error occurred during locking ( WM 013 )
Module & only valid from & to & ( WM 014 )
Module & contains no valid items per & ( WM 015 )
Starting date items corrected to starting date module ( WM 018 )
Finishing date items corrected to finishing date module ( WM 019 )
Function not yet supported ( WM 023 )
Listing procedure & not allowed for external use online ( WM 031 )
Module & is not of the category: manual maintenance ( WM 032 )
All materials from & already exist in module ( WM 037 )
Material & is not a generic material ( WM 047 )
Function is currently only available for complete generic materials ( WM 048 )
Material & can be replaced in & out of a total of & assortments ( WM 050 )
No assortment selected / no changes made ( WM 053 )
Category source ( & ) <> cat. target ( & ) ( WM 055 )
Active assortment assignments still exist in target, delete beforehand ( WM 056 )
No active assortment & ( WM 057 )
No multiple assignments allowed for material & ( WM 061 )
Assortment & does not have all the necessary attributes ( WM 062 )
Assortment & does not have all the necessary attributes ( WM 064 )
Inconsistency between plant no. & and customer no. & ( WM 066 )
Incomplete entry ( WM 068 )
Priority & in item is not less than priority & in module ( WM 069 )
Priority & in item greater than priority & in module ( WM 070 )
Reference module and new module have different categories ( WM 074 )
Reference module does not have the same attributes as the new module ( WM 075 )
Material no. &: Validity of material and module do not match ( WM 080 )
Validity of item & changed to match validity of material ( WM 081 )
Mat. no. & contains material category not allowed for assortment items ( WM 082 )
Material & already has variants listed differently ( WM 083 )
Module category "internal transport" only possible for local modules ( WM 084 )
No authorization for listing procedure & ( WM 086 )
Module & has not yet been activated ( WM 091 )
Material & is a variant of generic material & ( WM 106 )
Material & is a generic material and variants already exist ( WM 107 )
VSR not allowed without supplier ( WM 115 )
You require either supplier, material group, generic material or layout ( WM 116 )
More than & materials selected, please limit your selection ( WM 118 )
Exclusion module cannot be local module ( WM 119 )
MatGr / assortment grade: material and assortment do not match ( WM 120 )
Classif.: material and assortment do not match ( WM 121 )
Link: assortment grades / classification / layout procedure not allowed ( WM 124 )
Manual module selection and checking procedure not possible at present ( WM 126 )
Material & is a generic material, please enter variant ( WM 136 )
Exclusion listing of material & in assortment & from & - & ( WM 140 )
Not all materials copied ( WM 151 )
Enter either material group or material ( WM 152 )
Worklist too large, please limit selection ( WM 153 )
Function not allowed ( WM 156 )
Listings created / changed ( WM 164 )
No assortment-material listing created - already exists / contains errors ( WM 165 )
More than 1 entry in parameter table TWPA ( WM 180 )
You are not authorized to skip errors ( WM 186 )
Exit for interface "int. mat. maint." in tab. TWPA not filled ( WM 197 )
SOrg/DisChnl &/& Change assortment grade & using "Change" ( WM 198 )
No "Standard" or "Promotion" valuation category created for assortment & ( WM 199 )
In assortment & only defined mat. groups allowed, not & ( WM 220 )
You are assigning mats. to assortment & - they are not defined there ( WM 221 )
Material group not entered in material & ( WM 222 )
User exit not maintained for subsequent listing ( WM 227 )
No log available, as defined in Retail master data general parameters ( WM 236 )
Check listing procedure. Standard layout procedure parameters not set ( WM 256 )
Value-only mat. for mat. group & not defined (edit mat. group) ( WM 257 )
No plant profile maintained for &, termination ( WM 270 )
Error information only after new listing check / parameter changes ( WM 275 )
Number of materials with errors (not transferred): & ( WM 277 )
No subsequent listing is possible for assortment & ( WM 279 )
Reference plant for distribution centers has wrong plant category ( WM 280 )
Reference plant for stores has wrong plant category ( WM 282 )
Ref. plant for distribution centers is incorrect (different mat. data) ( WM 284 )
Reference plant for stores is incorrect (different material data) ( WM 285 )
Rack jobber modules are not defined for use ( WM 286 )
Mat. group assignment takes place independently of communication profile ( WM 291 )
Not a listing procedure for automatic data conversion with WRS6 changes! ( WM 301 )
No materials found ( WM 324 )
Last processed on & at &, take note of changes after this date ( WM 339 )
Only existing listing conditions are evaluated, no simulation ( WM 343 )
Please ignore messages with the external number MSGTIME ( WM 365 )
Ref. material for copying may be missing - check log ( WM 369 )
Listing procedure "&" already assigned exclusively for function "&" ( WM 370 )
Material & not listed for assortment / customer & per & ( WM 373 )
Material & for assortment / customer & per & - exclusion listing ( WM 374 )
Display listing conditions for generic mat. as well as for variants ( WM 375 )
Char. & (&) does not have alphanum. single vals.; comparison not possible ( WM 378 )
Listing procedure & not suitable for this assortment function ( WM 379 )
Note : the listing procedure used is &2 defined for assortment &1 ( WM 380 )
Material & does not have any components ( WM 387 )
Not listed - decided by user exit ( WM 388 )
Material & has inadmissible assignments ( WM 395 )
Material & is already assigned to & as rack jobber material ( WM 396 )
Value-only material & (possibly reference material) not fully maintained ( WM 426 )
New listing conditions receive the date in the material master ( WM 428 )
Module number & is not an admissible external number ( WM 434 )
Assortment & cannot be deleted while assignments still exist ( WM 437 )
Change material: module can only be deleted in module maintenance ( WM 443 )
Assortment grade & is not defined as a result assortment grade ( WM 447 )
Customer & is a retail plant and cannot be assigned here ( WM 448 )
Please note: assortment number & has already been used for a customer ( WM 450 )
Assortment no. & has already been used for a customer of a retail plant ( WM 451 )
Assortment & still has active listing conditions ( WM 452 )
The assignment can only be changed by editing the retail site ( WM 454 )
Material & only listed as component in assortment & ( WM 456 )
Assortment & is not a local assortment for a plant ( WM 457 )
No structured material found for material & ( WM 458 )
Not currently possible to limit the validity period of the assortment ( WM 462 )
Please select assortments before customers ( WM 463 )
Assortment & still has active assignments to assortment users ( WM 465 )
Indicator for controlling replenishment is not maintained correctly ( WM 466 )
Assortment control can only be defined for "real" customers ( WM 467 )
Assortment & is still assigned to assortment classes ( WM 469 )
Deselect all variants for generic material & first ( WM 471 )
Date for variant & must lie within listing period of the generic material ( WM 472 )
The date for generic material & must encompass the variants' dates ( WM 473 )
Retain different listing data in other distribution chains ( WM 474 )
Variants cannot currently be listed differently if mod. selected manually ( WM 477 )
Also select generic material & when selecting its variant & ( WM 479 )
Material & is a variant - that is not allowed here ( WM 480 )
Already differing assortment grades in various distribution chains! ( WM 481 )
Listing conditions already exist for material & SOrg & distr.chnl. & ( WM 482 )
No assortments are listed for the distribution chain(s) selected ( WM 483 )
Material group & does not exist ( WM 484 )
Existing listing conditions are to be changed ( WM 485 )
Function is no longer available in Release 4.0 ( WM 486 )
Material category & is not currently allowed here ( WM 487 )
Please note: & is a complex retail material, category = & ( WM 490 )
Please define 1 assortment as the main assortment for customer & ( WM 491 )
Please define 1 astmt as the main astmt for customer & SOrg & DistrChnl & ( WM 492 )
Customers are already assigned to assortment & ( WM 493 )
Assignment to assortment user & cannot be deleted ( WM 495 )
Only limited processing possible for assortment & ( WM 496 )
Module & still has items assigned to assortments ( WM 509 )
Customer & not assigned to promotion ( WM 515 )
Assortment check only possible if no more than one distr.chain assigned ( WM 519 )
Customer & is already assigned to assortment & ( WM 520 )
Shelf modules cannot be created manually ( WM 522 )
Company code is different from the plant ( WM 530 )
The date you have entered, &, must be before today's date ( WM 531 )
Indicator for parallel processing is not flagged ( WM 534 )
You have deactivated change document generation ( WM 535 )
You have not selected any material groups ( WM 536 )
Assignment already expired. Deletion not possible. ( WM 538 )
Enter either a plant or a customer, not both. ( WM 539 )
Plant & is assigned to reference plant &. Assignment not possible ( WM 540 )
Plant & is a reference plant. Dependent assignments exist. ( WM 541 )
A job with the name & already exists. ( WM 542 )
Enter a date or IMMEDIATELY for the start time ( WM 543 )
Job cannot be scheduled periodically ( WM 544 )
Job name & does not exist ( WM 545 )
Different Indicators: Plant &, Assortment &, Assortment & ( WM 547 )
Function was canceled by the user ( WM 549 )
Plant & is already assigned to reference plant & ( WM 554 )
Plant & is already assigned to assortment & ( WM 555 )
Job & already exists ( WM 557 )
Local assortments taken into account during listing. ( WM 558 )
Job & cannot be processed using this program ( WM 566 )
Server group & does not exist ( WM 568 )
Transaction WSM4 is obsolete ( WM 569 )
Plant assignments will be physically deleted ( WM 570 )
Resetting the functionality to 1:1 assignment is not permitted ( WM 571 )
Incorrect access to the buffer in table WLK1 ( WM 576 )
Enter data for distribution chain as well ( WM 577 )
Inconsistency in job processing => see long text ( WM 578 )
Material & is planned ( WM 579 )
Material & was already listed 999 times in assortment &; see long text ( WM 583 )
Blocked data cannot be displayed; see long text ( WM 584 )
Blocked data cannot be displayed; see long text ( WM 585 )
Enter either a material group or an assortment ( WM 609 )
IDoc & could not be processed ( WM 656 )
Unspecified layout module ( WM 670 )
Validity change: select all assortments for listing ( WM 681 )
Please enter supplier or purchasing organization ( WM 700 )
Wrong combination of selection options ( WM 708 )
No material was selected ( WM 711 )
Materials selected are flagged for discontinuation ( WM 713 )
Should all materials be discontinued from this assortment? ( WM 719 )
Material & & & cannot be processed ( WM 724 )
Errors occurred during processing ( WM 726 )
No follow-up actions exist ( WM 727 )
No data prepared for material discontinuation ( WM 728 )
& materials are being checked. The result appears in the work list. ( WM 729 )
Selection options are not offered for an offline check ( WM 730 )
Processing type not changed ( WM 733 )
Value material & is not assigned in assortment & ( WM 741 )
Discontinuation was started for the selected materials ( WM 742 )
Local update due to error during RFC call for package & with & records ( WM 743 )
Data updated locally due to capacity problems when calling RFC ( WM 744 )
Material &1 locked by assortment functions being performed by user &2 ( WM 750 )
One or more materials locked ( WM 751 )
Do not specify a transaction key ( WM 800 )
No splitting type found for material &1 ( WM 801 )
Use only vendor &1 in vendor characteristic values ( WMCV 001 )
Only 1 maintenance request is allowed for characteristic &1 and value &2 ( WMCV 002 )
Only 1 Replace request is allowed for charact &1 and vendor value &2 ( WMCV 003 )
Vendor charact. value &1 cannot be used for value &3 (used for value &2) ( WMCV 004 )
Vendor characteristic values are not specified in the distribution model ( WMCV 006 )
VALUE_SCL field segment should be the same as in Value Scale Header ( WMCV 101 )
Position &1 is already used by Characteristic Value &2 ( WMCV 102 )
Value Scale item &1 position must be the same as in Characteristic &3 ( WMCV 106 )
Value Scale item &1 does not exist in Characteristic &3 ( WMCV 107 )
Characteristic Value &1 could not be found in Value Scale &2 ( WMCV 108 )
A maximum of one default quota scale can exist for each value scale ( WMCV 109 )
No text found for Value Scale &1 after deletion, IDoc process cancelled ( WMCV 114 )
No text found for Quota Scale &1 after deletion, IDoc process cancelled ( WMCV 115 )
Value Scale no longer linked to Original Characteristic ( WMCV 116 )
A maximum of one default quota scale can exist for each value scale ( WMCV 121 )
Quota scale &1 does not contain any items ( WMCV 122 )
Quota scale &1 contains item without any corresponding value scale item ( WMCV 124 )
Quota Scale field is required ( WMCV 125 )
Text in &2 found for non-existent Quota Scale &1, deletion ignored ( WMCV 127 )
Non-existent Quota per Plant/Material Group found, deletion ignored ( WMCV 128 )
Characteristic &1 is not entered in the classification system (CABN) ( WMCV 141 )
Required field &1 is missing from segment or parameter ( WMCV 501 )
FUNCTION field contains an invalid value: &1 ( WMCV 502 )
Distribution was not started (recipient system &1 not available) ( WMCV 503 )
Material & is the pricing reference material for material &. ( WMGW_MM_MATRIX 015 )
Material & has material & as a pricing reference material. ( WMGW_MM_MATRIX 016 )
Error reading internal table &1 ( WMOD 001 )
Characteristic &1 is not entered in the classification system ( WMOD 002 )
Error calling function module &1 ( WMOD 003 )
No characteristic selected ( WMOD 004 )
No text found for characteristic &1 ( WMOD 005 )
Characteristic &1 does not have category 'CHAR' (character string) ( WMOD 006 )
Value scale &1 already exists ( WMOD 007 )
Value scale &1 does not exist ( WMOD 008 )
Enter a value scale ( WMOD 009 )
Quota scale &1 already exists ( WMOD 010 )
Quota scale &1 does not exist ( WMOD 011 )
Enter a quota scale ( WMOD 012 )
Characteristic &1 and value scale &2 do not match ( WMOD 013 )
Enter description for value scale &1 ( WMOD 014 )
Enter description for quota scale &1 ( WMOD 015 )
No value scale exists for characteristic &1 ( WMOD 016 )
Quota scale &1 deleted ( WMOD 017 )
Database insert error in table &1 ( WMOD 018 )
Database update error in table &1 ( WMOD 019 )
Database delete error in table &1 ( WMOD 020 )
No value scale exists for variant-creating characteristics ( WMOD 021 )
More than two variant-creating characteristics currently not possible ( WMOD 022 )
No variants found for generic material &1 ( WMOD 023 )
No variant-creating characteristics found for generic material &1 ( WMOD 024 )
No generic material entered ( WMOD 025 )
The quantity to be allocated is 0 ( WMOD 026 )
Quota scale &1 contains item without any corresponding value scale item ( WMOD 027 )
Quota scale &1 does not contain any items ( WMOD 028 )
Value scale &1 does not contain any items ( WMOD 029 )
Error reading database table &1 ( WMOD 030 )
No quota for characteristic value &1 ( WMOD 031 )
Characteristic values have not changed since the last reconciliation ( WMOD 032 )
No changes were made to the database tables ( WMOD 037 )
Val. scale &1 for quota scale &2 does not match processed characteristic ( WMOD 038 )
Quota scale &1 has no descriptive text ( WMOD 039 )
Conflicting posting requests exist for table &1 ( WMOD 040 )
A maximum of one default quota scale can exist for each value scale ( WMOD 041 )
Text record for non-existent quota scale &1 found ( WMOD 042 )
Item for non-existent quota scale &1 found ( WMOD 043 )
Quota scale &1 cannot be selected ( WMOD 044 )
Reference record for non-existent quota scale &1 found ( WMOD 048 )
Characteristic &1: Select a quota scale or 'Manual entry' ( WMOD 049 )
No quota scale was found for value scale &1 ( WMOD 050 )
No quotas are maintained for the variants ( WMOD 051 )
Default indicator being deleted in previous default quota scale &1 ( WMOD 052 )
User &1 currently processing value scale(s) &2 ( WMOD 055 )
Some characteristic values have been deleted: &1 &2 &3 &4 ( WMOD 060 )
Quota scale &1 not maintained for value scale &2 ( WMOD 061 )
Position cursor on a field containing a quota ( WMOD 062 )
More than one quota scale exists with the name &1 ( WMOD 063 )
Warning: Variant &1 entered twice. ( WMOD 064 )
Country group(s) not available ( WMOD 065 )
No internal characteristic number could be determined for charac. &1 ( WMOD 067 )
Value scale &1 has no descriptive text ( WMOD 068 )
No items exist for value scale &1 ( WMOD 069 )
Several default quota scales exist for value scale &1 ( WMOD 070 )
Quota scale &1 has no descriptive text ( WMOD 071 )
No items exist for quota scale &1 ( WMOD 072 )
Assign the country groups to the characteristic first ( WMOD 076 )
No country groups have been assigned to characteristic & ( WMOD 078 )
No language can be assigned to country group & ( WMOD 079 )
No maintenance view exists for table &1 ( WN 003 )
Plant & already exists as a retail plant ( WN 005 )
The POS currency was changed from &2 to &1 ( WN 006 )
& has invalid plant category: '&' & ( WN 007 )
Address number & appears in plant & ( WN 015 )
Supplier not yet created ( WN 016 )
Consumer account group not permitted ( WN 017 )
Maintain the description ( WN 018 )
Either the pull or push process must be permitted ( WN 019 )
Plant category not maintained in plant profile & ( WN 020 )
Plant profile & does not exist ( WN 021 )
Plant & assigned plant category & from plant profile & ( WN 024 )
Please maintain valid account group & in plant profile & ( WN 025 )
Please enter a valid plant profile: & ( WN 026 )
Valuation area assignment will be extended ( WN 029 )
Sales org. & already assigned to purch. org & ( WN 032 )
Pur. org. & assigned to company code & ( WN 033 )
Sales area & & & not defined ( WN 034 )
The customer for inter-company billing missing in SOrg & ( WN 036 )
Dist. channel &2\&1 does not have distribution chain cat. &3 ( WN 039 )
Confirm ( WN 042 )
Confirm organizational data & by pressing ENTER ( WN 047 )
Dept. &1 not maintained as default value in MG &2, plant &3 ( WN 049 )
Department &1 not maintained in plant &2 ( WN 050 )
Material group & does not exist in supplying plant & ( WN 051 )
Entry & not found in & ( WN 054 )
Supplying plant & cannot deliver to any of the plant distribution chains ( WN 055 )
First delete tables assigned to copy rule ( WN 057 )
Storage location & not maintained in plant & ( WN 062 )
Priorities missing for period overlap ( WN 064 )
You are not authorized to create plant & ( WN 067 )
You are not authorized to change plant & ( WN 068 )
Plant is not assigned to the sales area ( WN 071 )
Receiving point & not defined ( WN 073 )
Unloading point & not assigned to goods recipient ( WN 074 )
Plant & has no receiving points assigned to it ( WN 075 )
Goods recipient & has no unloading points assigned to it ( WN 076 )
Please maintain partner function GR and unloading points for cust. assgnd ( WN 077 )
Goods recipient & not defined as partner function of customer ( WN 078 )
Goods recipient & has no unloading points assigned to it ( WN 080 )
Receiving points updated due to deletion of unloading point(s) &1 ( WN 082 )
Errors while creating or updating business partner in the target system ( WN 089 )
Time key & does not exist ( WN 091 )
Cannot create business partner for plant &1 ( WN 094 )
Cannot create customer master data for bus. partner assigned to plant &1 ( WN 095 )
Cannot create supplier master data for bus. partner assigned to plant &1 ( WN 096 )
Class & in plant profile & has no characteristics ( WN 111 )
Class type and class not maintained in plant profile & ( WN 112 )
Data for class type & will be copied from reference plant & ( WN 114 )
Class & does not exist in class type & ( WN 116 )
Data for class type & will not be copied from reference plant & ( WN 117 )
No class types are assigned to plant group application & ( WN 118 )
Invalid class type & ( WN 119 )
Val. grouping code & missing in stnd accnt table for chart of accounts & ( WN 121 )
Layout already maintained at plant level ( WN 150 )
No area schema has been assigned ( WN 153 )
Maintain layout first ( WN 154 )
Area schema & not assigned to layout & ( WN 155 )
Layout already maintained for department & ( WN 156 )
No sales area profitablilty could be determined ( WN 157 )
Cust. & has not been created for SlsOrg. & DistCh. & Div. & ( WN 180 )
Add. compulsory fields exist for address in screen control acct grp & & ( WN 181 )
Add. comp. fields exist for address in act.-dep. screen control & -&- ( WN 182 )
Listing conditions already exist for plant ( WN 190 )
Listing procedure & not allowed for manual module selection ( WN 191 )
No vendor processing possible ( WN 200 )
Please enter customer OR vendor ( WN 201 )
Customer does not exist ( WN 202 )
Supplier does not exist ( WN 203 )
Choose a valid line ( WN 205 )
No material assigned to layout module & ( WN 206 )
Please select at least & & ( WN 207 )
Pur. org. data & not maintained ( WN 208 )
Company code & not maintained ( WN 209 )
Customer & is a consumer ( WN 210 )
No assignments could be created for material group hierarchy & ( WN 211 )
Profile & does not exist for value-based Inventory Management in plant & ( WN 213 )
No exceptions can be maintained for profile & in plant & ( WN 214 )
Sales price valuation not active for profile & & ( WN 215 )
Assignments were copied ( WN 216 )
Plants copied to worklist & ( WN 217 )
Department & assigned to material group & ( WN 218 )
Please enter a posting material for material & ( WN 219 )
No hierarchy material exists for level &2 in material group &1 ( WN 220 )
&1 is not a material group ( WN 221 )
You must enter a material ( WN 222 )
Choose a valid line ( WN 223 )
Distribution chain, SOrg & and DChl & not fully maintained for RP determ. ( WN 224 )
Distribution chain & & not valid for retail price determination ( WN 225 )
No assignments exist in material group hierarchy & ( WN 226 )
Profile for value-based inventory management does not exist ( WN 227 )
A revaluation profile must be entered for revaluation at retail ( WN 228 )
Material & already exists as an exception ( WN 229 )
No material group hierarchies exist for selection ( WN 230 )
Material group & does not exist in plant & ( WN 232 )
Please enter one value only ( WN 233 )
There are still assortments assigned to the customer ( WN 234 )
No supplier acct group exists for plant profile &1 with plant category &2 ( WN 251 )
Please enter credit card institute and merchant ID ( WN 260 )
Plant & is not a distribution center ( WN 270 )
Customer & is not assigned to a plant master ( WN 271 )
No valid characteristic selected for & ( WN 302 )
Internal error in form routine: & & ( WN 308 )
Only some of the changes are displayed ( WN 314 )
Existing BP &1 with supplier &2 will be assigned; maintain customer ( WN 461 )
Existing BP &1 will be assigned; maintain customer ( WN 462 )
Existing BP &1 will be assigned; maintain customer and supplier ( WN 463 )
Existing BP &1 with customer &2 will be assigned; maintain supplier ( WN 464 )
No role found with business partner role category BPSITE ( WN 467 )
Plant profile changed; supplier is now required and has to be maintained ( WN 469 )
You cannot change this plant; migration is still pending ( WN 470 )
New plant will overwrite referenced plant in customer master ( WN 474 )
Referenced supplier in customer master will be overwritten ( WN 475 )
New plant will overwrite referenced plant in supplier master ( WN 476 )
Referenced customer in supplier master will be overwritten ( WN 477 )
You cannot change the supplier of a retail site customer ( WN 480 )
You cannot change the plant of a retail site customer ( WN 481 )
You cannot change the customer of a retail site supplier ( WN 482 )
You cannot change the plant of a retail site supplier ( WN 483 )
You cannot maintain the archiving flag of business partner &1 ( WN 484 )
Error while processing customer &1; cust. is assigned to a retail site ( WN 490 )
Error while processing supplier &1; suppl. is assigned to a retail site ( WN 491 )
Error while processing customer &1; cannot change retail site assignment ( WN 492 )
Error while processing supplier &1; cannot change retail site assignment ( WN 493 )
Supplier &1 already assigned to plant &2 ( WN 501 )
Customer & already assigned to plant & ( WN 502 )
Supplier &1 not maintained ( WN 503 )
Customer & already exists ( WN 504 )
Customer & not maintained ( WN 506 )
Supplier &1 not assigned to plant &2 ( WN 507 )
Customer & not assigned to plant & ( WN 508 )
Reference to customer master record missing for plant & ( WN 510 )
Plant data not fully maintained for customer '&' ( WN 511 )
First assign the plant a customer number ( WN 515 )
Please enter a company code and/or a sales area ( WN 516 )
Please enter a company code and/or a purchasing organization ( WN 517 )
Number range & is not created for object & ( WN 530 )
Please enter a value between & and & ( WN 533 )
The number range & has not been created for customers ( WN 535 )
Number range &1 has not been created for suppliers ( WN 536 )
The number range & has not been created for layouts ( WN 537 )
Plant &1 does not exist in the source system ( WN 650 )
Plant &1 is inconsistent in the source system ( WN 651 )
Plant &1 is inconsistent in the target system ( WN 652 )
Plant &1 is locked in the source system ( WN 653 )
Plant &1 is locked in the target system ( WN 654 )
Plant &1 is identical in the source system and target system ( WN 656 )
Plant &1 was transported successfully ( WN 657 )
Database error while creating or changing plant &1 ( WN 658 )
Database error while creating or changing the address of plant &1 ( WN 659 )
Plant &1 can be transported ( WN 660 )
Plant &1 has no plant data in the source system (WRF1 does not exist) ( WN 662 )
Plant &1 cannot be transported due to inconsistencies ( WN 663 )
Business partner of plant &1 is not available in the target system ( WN 666 )
Business partner of plant &1 has no customer in target system ( WN 676 )
Business partner of plant &1 has no supplier in target system ( WN 677 )
Maintenance of plant &1 is incomplete; update fields for customer &2 ( WN 678 )
Maintenance of plant &1 is incomplete; update fields for supplier &2 ( WN 679 )
Cannot persist key mapping for contact persons &1 and &2; see long text ( WN 681 )
Cannot persist contact key mapping; see long text ( WN 682 )
Errors while creating contact business partner in the target system ( WN 683 )
Transfer of contact persons is not possible; check key mapping settings ( WN 686 )
Table &1 cannot be transported due to incorrect configuration ( WN 688 )
Maintainance of table &1 is not possible, see longtext ( WN 699 )
Exceptions were not created for all selected plants ( WN 708 )
SYST: error deleting tab. & key: & & & ( WN 801 )
SYST: error inserting tab. & key: & & & ( WN 802 )
SYST: error updating tab. & key: & & & ( WN 803 )
SYST: error reading tab. & key: & & & ( WN 804 )
SYST: error determining next address number ( WN 805 )
EDI partner profiles could not be copied from reference plant & ( WN 806 )
Staging date not taken into account if transportation chain assigned ( WN 852 )
Plant profile not maintained. Please convert data with report RWWPLPRO ( WN 890 )
Include SAP Note 412256 With Maximum Number &1 ( WN 899 )
Workflow Wizard (type) is already being processed - Display only ( WO 001 )
Error in tree display ( WO 002 )
Enter a name for the Workflow Wizard ( WO 021 )
Enter a description for the Workflow Wizard ( WO 022 )
Workflow Wizard with name & exists already ( WO 023 )
Creation of Workflow definition canceled ( WO 024 )
Deletion was canceled ( WO 025 )
Program & does not contain a FORM routine & ( WO 032 )
Program & and FORM routine & are already in the definition ( WO 044 )
No IMG help exists for & & ( WO 047 )
Workflow definition & does not exist in the database ( WO 151 )
Workflow Builder could not be called ( WO 153 )
Step & could not be created in Workflow definition ( WO 154 )
Workflow definition was not written to database ( WO 155 )
Workflow definition & was not deleted from database ( WO 156 )
Unable to delete. Exception &1 is inherited by surrounding block ( WO 167 )
Message-workflow linkage could not be updated ( WO 182 )
Message '& &' does not exist ( WO 183 )
& started ( WO 200 )
Workflow container not found ( WO 201 )
Step & of Workflow definition not found ( WO 202 )
Binding for step & could not be created automatically ( WO 203 )
Task container for step & task & not found ( WO 204 )
Object type & does not exist ( WO 217 )
Method & for object type & does not exist ( WO 218 )
Workflow definition & could not be deleted ( WO 219 )
Workflow definition & could not be found in the database ( WO 220 )
Operation failed - activate workflow trace ( WO 221 )
Agent & already selected ( WO 222 )
Agent must be selected ( WO 300 )
Number of approvers required is greater than number of approvers ( WO 301 )
Object type & does not support interface & ( WO 303 )
Number of approval levels must be entered (>0) ( WO 304 )
Enter number of branches and required number of branches ( WO 305 )
Select more than one task for grouping ( WO 306 )
Fields which have been grouped cannot be grouped again ( WO 307 )
Tasks must be selected for processing ( WO 308 )
Only one task may be selected for function & ( WO 309 )
Background tasks cannot be used ( WO 310 )
Task '&' has no agent assignment ( WO 312 )
Task '&' has too few results (at least & are required) ( WO 313 )
Tasks do not refer to object type '&' ( WO 319 )
There are no tasks for method & of object type & ( WO 324 )
Serious system error occurred - creation of WF definition terminated ( WO 328 )

Length: 871336 Date: 20191022 Time: 001524

Count: 3467     sap01-206 ( 2272 ms ) This documentation is copyright by SAP AG.

Our Service

Looking for Support? Questions?

The

Consolut

Callback-Service

Leave us your contact details and we will call you back. Panels marked with * are mandatory.