SAP® Documentation

Single view

ABAPSORT_ITAB - SORT ITAB

General Material Data   TXBHW - Original Tax Base Amount in Local Currency  
This documentation is copyright by SAP AG.
SAP E-Book

SORT itab

Short Reference



Syntax

SORT itab $[STABLE$]
          ${ ${ $[ASCENDING$|DESCENDING$]
              $[AS TEXT$]
              $[BY ${ comp1 $[ASCENDING$|DESCENDING$] $[AS TEXT$]$}
                  ${ comp2 $[ASCENDING$|DESCENDING$] $[AS TEXT$]$}
                  ... $] $}
          $| ${ $[BY (otab)$] $}
          $| ${ $[BY expr$] $} $}.


Additions

1. ... STABLE

2. ... ASCENDING$|DESCENDING

3. ... AS TEXT

4. ... BY compi $[ASCENDING$|DESCENDING$] $[AS TEXT$]

5. ... BY (otab)

6. ... BY expr

Effect

This statement sorts an internal table itab by the size of its components. Here, default sizes are compared using the general comparison rules, that is:

  • Numeric and byte-like components are sorted by their values.
  • Character-like components are sorted by default by their binary representation (code page). Textual sorting of character-like components can be performed using the addition AS TEXT.
  • The sizes of other component types are compared using the corresponding rules for reference variables, structures, and internal tables.

If no explicit sort key is entered using the addition BY, the internal table itab is sorted by the primary table key. The priority of the sort is based on the order in which the key fields are specified in the table definition. In standard keys, the sort is prioritized according to the order of the key fields in the row type of the table. If the primary table key of a standard table is empty, no sort takes place. If this is known statically, the syntax check produces a warning.

Sorting is unstable by default, which means that the relative order of rows that do not have different sort keys is not preserved when they are sorted. The order can be different depending on the platform or when sorted multiple times. The addition STABLE can be used for stable sorting.

itab expects a standard table or a hashed table.

  • In standard tables, the primary table index is applied in accordance with the sort order
  • In hashed tables, the internal order is modified. This internal order was defined either by inserting rows in the internal table or by a previous sort using the statement SORT.

In both table categories, SORT specifies the order in which a subsequent LOOP runs without the addition USING KEY.

Sorted tables cannot be sorted using SORT and applying the statement SORT to sorted tables is prohibited by the syntax. If the system only detects that a sorted table is to be sorted at runtime, a non-handleable exception is raised if this action could modify the existing sorting. The latter occurs in the following cases:

  • if the addition BY is used to specify a different sort key as the initial part of the table key.
  • if the addition DESCENDING is used.
  • if the addition AS TEXT is used.
  • if an attribute of an object is specified as a component in the addition BY.

Otherwise, the statement SORT is ignored for sorted tables.

Notes

  • It is best to specify an explicit sort key behind BY, if possible. An implicit sort behind the primary table key (which can itself, in standard tables, be defined implicitly as a standard key) makes a program difficult to understand and possibly unpredictable.

  • When using the primary table key, note that this key can be the standard key, which can also have unexpected consequences:
  • If the row type is structured, the table is sorted by all character-like and byte-like components.

  • The standard key of a standard table can be empty.

  • Secondary table keys cannot be specified as sort keys.

  • SORTs are ignored by the assignment of rows to a secondary table index.

  • The addition GROUP BY of the statement LOOP AT itab or of a FOR expression also has the additions ASCENDING and DESCENDING for sorting groups. These can be used to expand the statement SORT if its sort criteria are not sufficient (see the executable example).

  • It is possible to sort columns with reference types but doing this is questionable. Here it is important to note that no comparison rule is defined for non-initial invalid references. An internal table can only be sorted by valid or initial references. A non-initial, invalid reference leads to a runtime error if it is involved in sorting.

  • The system class CL_ABAP_ITAB_UTILITIES contains method VIRTUAL_SORT, which can be used to virtually sort a set of internal tables. See also the executable examples listed below.


Example

Simplest form of the statement SORT for internal tables. The hash table carriers is sorted by its primary key (in other words, sorted by column carrid).

DATA carriers TYPE HASHED TABLE OF scarr
              WITH UNIQUE KEY carrid.

SELECT *
       FROM scarr
       INTO TABLE @carriers.

SORT carriers.

Addition 1

... STABLE

Effect

STABLE is used to perform stable sorts, which means that the relative order of rows (an order that does not change in the sort key) remains unchanged in the sort. If the addition STABLE is not specified, the order is not stable:

  • The order can depend on the platform.
  • Multiple sorting of a table using the same sort key can produce a different order each time the table is sorted.


Example

Produces a stable sort of the internal table flights by columns cityfromcityto, whereby the order within this sorting with respect to carrid and connid is preserved.

SELECT carrid, connid, cityfrom, cityto
       FROM spfli
       ORDER BY carrid, connid
       INTO TABLE @DATA(flights).

SORT flights STABLE BY cityfrom cityto.

Addition 2

... ASCENDING$|DESCENDING

Effect

The addition ASCENDING or DESCENDING can be used to specify the sort direction explicitly as ascending or descending. If neither of the additions is specified, the table is sorted in ascending order. This sort direction can be overwritten after the addition BY for components specified individually here.

Example

The internal table itab is sorted by its primary key (in other words, by its rows). Next, LOOP AT GROUP BY can be used for grouping and determine the number of rows per group.

DATA itab TYPE TABLE OF i WITH NON-UNIQUE KEY table_line.

DATA(rnd) = cl_abap_random_int=>create( seed = + sy-uzeit
                                        min  = 1
                                        max  = 10 ).

itab = VALUE #( FOR i = 1 UNTIL i > 100 ( rnd->get_next( ) ) ).

SORT itab DESCENDING.

LOOP AT itab ASSIGNING FIELD-SYMBOL(<fs>)
             GROUP BY ( key = <fs> size = GROUP SIZE )
             ASSIGNING FIELD-SYMBOL(<key>).
  cl_demo_output=>write( |{ <key>-key WIDTH = 4
                         }{ <key>-size }| ).
ENDLOOP.
cl_demo_output=>display( ).

Addition 3

... AS TEXT

Effect

The addition AS TEXT specifies that text-like components are sorted in accordance with the locale of the current text environment. If AS TEXT is not specified, text-like components are sorted according to the encoding in the code page of the current text environment. This can be overwritten after the addition BY for the components specified individually here. The text environment is set when an internal session is opened or by using the statement SET LOCALE.

Notes

  • The result of sorting without the addition AS TEXT depends on the operating system of the host computer of the current . Although the sequence of individual letters that belong to the activated language remains the same across different operating systems, there are differences in terms of the characters that do not belong to the alphabet of the activated language. Even if only the letters from the alphabet of the activated language are used, some slight differences occur when sorting complete words. Furthermore, the order of uppercase and lowercase letters is specific to the operating system.
  • The use of the addition AS TEXT usually renders the statement CONVERT TEXT superfluous in the context of internal tables.
  • A sort without the addition AS TEXT is considerably faster than a sort that does use this addition. If it is certain that both sorts produce the same order, the addition AS TEXT is not necessary. This can be the case if, for example, text-like components contain characters from the ASCII character set only and only lowercase or uppercase letters.


Example

Sorts a hashed tabletext_tab by the order in the code page and in accordance with the locale of the current text environment. If a western European text environment is configured, the sorts produce the orders Miller, Moller, Muller, Möller and Miller, Moller, Möller, Muller respectively (also see the executable example for SET LOCALE).

CLASS demo DEFINITION.
  PUBLIC SECTION.
    CLASS-METHODS main.
  PRIVATE SECTION.
    CLASS-DATA text_tab TYPE HASHED TABLE OF string
               WITH UNIQUE KEY table_line.
ENDCLASS.

CLASS demo IMPLEMENTATION.
  METHOD main.
    text_tab = VALUE #(
      ( `Muller` )
      ( `Möller` )
      ( `Moller` )
      ( `Miller` ) ).
    SORT text_tab.
    cl_demo_output=>write_data( text_tab ).
    SORT text_tab AS TEXT.
    cl_demo_output=>display_data( text_tab ).
  ENDMETHOD.
ENDCLASS.

START-OF-SELECTION.
  demo=>main( ).

Sorting Internal Tables Alphabetically

Addition 4

... BY compi $[ASCENDING$|DESCENDING$] $[AS TEXT$]

Effect

The addition BY compi does not sort the table by the primary table key, but by the components comp1 comp2... specified after it instead. The components are specified as described under Specifying Components. If all components are specified using name variables and these variables contain only blanks, no sort takes place. The priority of the sort depends on the order in which the components comp1 comp2 ... are specified from left to right. The specified components can also be duplicated or can overlap. The specified components can have any data type. The relevant comparison rules apply to the evaluation.

If neither of the additions ASCENDING or DESCENDING are specified after compi, the sort direction specified by addition 2 is used. If one of the additions ASCENDING or DESCENDING is specified, it overwrites the default for this component.

If the addition AS TEXT is not specified after a text-like component compi, the instructions defined by addition 3 are used. If the addition AS TEXT is specified after a text-like component, it overwrites the default for this component. In non-text-like components, AS TEXT cannot be specified, unless a structured component is specified. In structured components, AS TEXT only affects text-like components.

Notes

  • If the row type of the internal table is not known statically, the components can only be specified dynamically and not directly.
  • Instead of individual dynamic components, an internal table can be specified directly as otab or as the result of an expression expr as a dynamic sort key (see additions 5 and 6). Using a table like this has the advantage that any exceptions are handleable. When specifying the table, the number of components of the sort key is also dynamic. In contrast, when individual dynamic components are used, a character-like data object must be specified for any required component, which is ignored if it only contains blank characters.

  • An obsolete variant allows field symbols to also be specified for the components outside of classes, for standard tables.


Example

Sorts the internal table itab in ascending order by column col1 and in descending order by column col2.

TYPES:
  BEGIN OF line,
    col1 TYPE c LENGTH 1,
    col2 TYPE i,
  END OF line.

DATA itab TYPE STANDARD TABLE OF line WITH EMPTY KEY.

itab = VALUE #( ( col1 = 'A' col2 = 6 )
                ( col1 = 'B' col2 = 4 )
                ( col1 = 'B' col2 = 7 )
                ( col1 = 'C' col2 = 1 )
                ( col1 = 'C' col2 = 3 )
                ( col1 = 'B' col2 = 9 )
                ( col1 = 'A' col2 = 2 )
                ( col1 = 'A' col2 = 5 )
                ( col1 = 'C' col2 = 8 ) ).

SORT itab BY col1 ASCENDING col2 DESCENDING.

cl_demo_output=>display( itab ).

Addition 5

... BY (otab)

Effect

The addition BY (otab) does not sort the table by the primary table key, but by the component specified dynamically in the internal table otab instead. Each row of the table otab defines a component of the sort key. The priority of the sort is based on the order of the rows in otab. If the table otab is initial, the table is not sorted.

For otab, a standard table of the table type ABAP_SORTORDER_TAB from ABAP Dictionary must be specified. The row type of this table is the dictionary structure ABAP_SORTORDER with the following components:

  • NAME of the type SSTRING

    for specifying a component of the sort key. The component is specified in the form "comp_name[+off(len)]", where "comp_name" must be the name of a component in itab (uppercase characters). The component name may contain offsets and lengths, structure component selectors, and component selectors for assigning structured data objects and attributes in classes or objects.

  • DESCENDING of the type CHAR with length 1

    for specifying the sort direction for the current component. If DESCENDING is initial, the sort is performed in ascending order. If DESCENDING has the value "X", the table is sorted in descending order.

  • ASTEXT of the type CHAR with length 1

    for the text sorting of the current component. If ASTEXT has the value "X", the sort is performed as with the addition AS TEXT. This is only possible for character-like components. If ASTEXT is initial, character-like components are sorted in accordance with their binary representation.

If a column of otab has invalid content (that is, if NAME contains the name of a component that does not exist or an incorrect offset/length or if DESCENDING and ASTEXT do not contain "X" or the initial value), this raises a handleable exception of the class CX_SY_DYN_TABLE_ILL_COMP_VAL.

Notes

  • The addition BY (otab) cannot be combined with BY compi.

  • When using the addition BY (otab), it is not possible to use DESCENDING or AS TEXT to specify a descending sort direction or textual sorting for all components.

  • If a single parenthesized data object (dobj) is specified after the addition BY, its data type decides whether its content is used to specify a single dynamic component or multiple components. In either case, no sort takes place if dobj is initial.


Example

Imports a database table into a dynamic internal table dynamically and sorts its content dynamically. The name of the database table and the names of the columns (by which the table sorted) can be entered.

DATA dbtab TYPE c LENGTH 30 VALUE 'spfli'.
cl_demo_input=>add_field( CHANGING field = dbtab ).
DATA columns TYPE string VALUE `cityfrom, cityto`.
cl_demo_input=>request( CHANGING field = columns ).
dbtab = condense( to_upper( dbtab ) ).

DATA dref  TYPE REF TO data.
FIELD-SYMBOLS <itab> TYPE STANDARD TABLE.

TRY.
    CREATE DATA dref TYPE STANDARD TABLE OF (dbtab).
    ASSIGN dref->* TO <itab>.
  CATCH cx_sy_create_data_error.
    cl_demo_output=>display( 'Wrong data type!' ).
    LEAVE PROGRAM.
ENDTRY.

TRY.
    SELECT *
           FROM (dbtab)
           INTO TABLE @<itab>.
  CATCH cx_sy_dynamic_osql_semantics.
    cl_demo_output=>display( 'Wrong database table!' ).
    LEAVE PROGRAM.
ENDTRY.

SPLIT columns AT `,` INTO TABLE DATA(column_tab).
DATA(order) = VALUE abap_sortorder_tab(
                FOR wa IN column_tab
               ( name = condense( to_upper( wa ) ) ) ).

TRY.
    SORT <itab> BY (order).
  CATCH cx_sy_dyn_table_ill_comp_val.
    cl_demo_output=>display(  'Wrong column name!' ).
    LEAVE PROGRAM.
ENDTRY.

cl_demo_output=>display( <itab> ).

Addition 6

... BY expr

Effect

The addition BY expr can be used to specify an expression or a functional method call expr whose result is an internal table with the same type and content as in the preceding addition BY (otab). expr is a general expression position. The behavior is the same as when specifying a parenthesized internal table directly.

Note

Parentheses cannot be placed around expr.

Example

The above example for specifying BY (otab) can be written in a shorter form as shown below. Instead of specifying the unnecessary internal table order, it is possible to specify the tabular value (constructed using the value operator VALUE) of the required content).

...

SPLIT columns AT `,` INTO TABLE DATA(column_tab).
TRY.
    SORT <itab> BY VALUE #( FOR wa IN column_tab
                ( name = condense( to_upper( wa ) ) ) ).
  CATCH cx_sy_dyn_table_ill_comp_val.
    cl_demo_output=>display(  'Wrong column name!' ).
    LEAVE PROGRAM.
ENDTRY.

...


Sorting Internal Tables Dynamically.

Exceptions

Non-Catchable Exceptions

CX_SY_DYN_TABLE_ILL_LINE_TYPE

  • Cause: The table otab has a prohibited line type.
    Runtime Error:DYN_TABLE_ILL_LINE_TYPE

CX_SY_DYN_TABLE_ILL_COMP_VAL

  • Cause: A column of the table otab contains a prohibited value.
    Runtime Error:DYN_TABLE_ILL_COMP_VAL

Non-Catchable Exceptions

  • Cause: A sort criterion dynamically specified in the form (name) with the explicit addition AS TEXT is not text-like.
    Runtime Error:SORT_AS_TEXT_BAD_DYN_TYPE
  • Cause: A field symbol used as a dynamic sort criterion with an explicit addition AS TEXT is not text-like.
    Runtime Error:SORT_AS_TEXT_BAD_FS_TYPE
  • Cause: A field symbol used as a dynamic sort criterion does not point to the header row of the internal table to be sorted.
    Runtime Error:SORT_ITAB_FIELD_INVALID
  • Cause: For a table of the type SORTED TABLE, the sort key does not match a beginning piece of the table key.
    Runtime Error:SORT_SORT_ILL_KEY_ORDER
  • Cause: The additions DESCENDING and AS TEXT are not allowed for tables of the type SORTED TABLE.
    Runtime Error:SORT_SORT_ILLEGAL
  • Cause: More than 250 sort criteria.
    Runtime Error:SORT_TOO_MANY_FIELDS
  • Cause: Sort mode neither 'E'(xternal) nor 'I'(nternal)
    Runtime Error:SORT_ILLEGAL_MODE







CPI1466 during Backup   SUBST_MERGE_LIST - merge external lists to one complete list with #if... logic for R3up  
This documentation is copyright by SAP AG.

Length: 33688 Date: 20200126 Time: 042134     sap01-206 ( 140 ms )

Our Service

Looking for Support? Questions?

The

Consolut

Callback-Service

Leave us your contact details and we will call you back. Panels marked with * are mandatory.