OS/400 Messages

Are you looking for the description of OS/400 (System i) messages e.g. CPF9801? Then you have come to the right place. Below you can see a (hoefully) complete list of of all OS/400 messages with all "second level texts".

Complete OS/400 Messages Documentation From CCA0113 up to CPC2626

This documentation is copyright by IBM.
Count: 1462 Skipped: 0
OS/400 Messages
Description
PKA key store file &1 in library &2 is not the correct file type.
PKA key store file &1 in library &2 is not found.
Not authorized to PKA key store file &1 in library &2.
Key store file not specified.
Read/write operation failed for DES Key Store file &1 in library &2.
Out of resources for in DES key store file &1 in library &2.
DES key store file &1 in library &2 is not the correct file type.
DES key store file &1 in library &2 is not found.
Not authorized to DES key store file &1 in library &2.
Read/write operation failed for AES keystore file &1 in library &2.
Out of resources for AES keystore file &1 in library &2.
AES keystore file &1 in library &2 is not the correct file type.
AES keystore file &1 in library &2 is not found.
Not authorized to AES keystore file &1 in library &2.
IBM i - CCA Cryptographic Service Provider
The API completed successfully
The condition token passed to &1 is not valid.
The application is ending.
This job is about to end.
The condition sent by &1 was not handled.
The target for &1 is not valid.
&1 is unable to find the procedure.
Additional registrations of the procedure remain in the queue.
The type of move for &1 is not valid.
Procedure already registered, registered again.
The procedure provided for &1 is not valid.
The condition token passed to &1 is not valid.
No active condition for call to &1.
The condition being promoted is not valid.
The result code received from a condition handler is not valid.
The Case parameter for &1 is not valid.
Unsupported control code &2 passed to procedure &1.
Severity passed to &1 is not valid.
Unsupported destination code &2 passed to &1.
The identifier &2 is not valid.
&1 cannot find message &3 in message file &2.
The message returned is truncated.
&1 cannot find message file &2.
The operational descriptor data type is not valid.
Missing operational descriptor.
The argument number is not valid.
A NULL-terminated string is not found.
The storage headers are damaged.
The heap identifier does not match any existing heap.
The initial_size parameter is not valid.
The increment parameter is not valid.
Allocation strategy identifier value is not valid.
The mark does not match any existing mark.
Requested storage size is not valid.
The maximum number of heaps supported by ILE has been reached.
The starting address for reallocation is not valid.
The basic initial heap cannot be marked and discarded.
Insufficient storage available to satisfy the request.
Allocation strategy identifier is not supported by ILE.
Allocation strategy identifier is not supported by ILE.
The allocation strategy identifier is out of range.
The heap cannot be marked.
Mutex &1 failed to lock with reason code &2.
Mutex &1 failed to unlock with reason code &2.
This thread ended abnormally.
The argument is too close to multiple (pi/2)'s or pi's for procedure &1.
The arguments for procedure &1 are not valid.
The arguments for procedure &1 are not valid.
The value of the argument for &1 is outside the range &2.
The parameter values for procedure &1 are not valid.
The arguments are not valid for procedure &1.
The argument for procedure &1 is not valid.
The argument for &1 is less than 0.0.
The argument for &1 is greater than &2.
The argument for &1 is not valid.
The argument for &1 is not valid.
The arguments for &1 are not valid.
The argument for &1 is not valid.
The argument for &1 is not valid.
The argument for &1 is not valid.
The argument for &1 is not valid.
The argument for &1 is not valid.
The arguments for &1 are not valid.
The argument for &1 is not valid.
The result overflows the result field in &1.
Floating-point overflow exception occurred in &1.
Floating-point underflow exception occurred in &1.
A zero divide occurred in &1.
Floating-point zero divide exception occurred in &1.
The argument for &1 is not valid.
The argument for &1 is not valid.
Floating-point operand exception occurred in &1.
The argument for &1 is not valid.
The complex argument for &1 is not valid.
Local time not available.
UTC offset not available.
The value for seconds is out of range.
The value for seconds is outside of era.
Insufficient data provided.
The value for day is not valid.
The value for era is not valid.
The value for hour is not valid.
The value for day is not valid.
The value for the given Lilian date is not valid.
The value for Lilian date is not valid.
The value for Lilian year is not valid.
The value for millisecond is not valid.
The minute value is not valid.
The value for month is not valid.
The picture string specification is not valid.
The value for second is not valid.
The picture string is not valid.
The value for year is not valid.
Lilian date outside of era.
UTC not available to generate random seed from system time.
Seed value for &1 is not valid.
Timestamp picture mismatch.
Date truncated.
Timestamp truncated.
UTC not available.
The century_start value is not between 0 - 100.
Input string is not valid
Input string is out of range
The argument being tested is not an address.
At least one field in the allocation strategy is not valid.
&1 cannot be called in the default activation group.
Priority value &1 is not valid.
Cannot allocate storage in &1.
The pointer type in &1 is not valid.
The call stack entry given to &1 no longer exists.
The action &1 specified by a condition handler cannot be performed.
The message specified for &1 is not an exception message.
The option specified for &1 is not valid.
The relative call stack entry &2 specified for &1 must be either -1 or 0.
The message type for promotion is not valid.
&1 cannot be called at this time.
Negative offset supplied to &1.
Exception recursion detected.
The date picture string is truncated.
The country/region_code identifier is not valid for procedure CEEFMDA.
The time picture string is truncated.
The country/region_code identifier was not valid for CEEFMTM.
The resulting string is truncated
The country/region_code identifier is not valid for CEEFMDT.
Press ENTER to end terminal session.
F3=Exit F4=End of File F6=Print F9=Retrieve F17=Top
F18=Bottom F19=Left F20=Right F21=User Window
Application error. &1 unmonitored by &2 at statement &5, instruction &3.
Unexpected user error occurred in &1.
Attempted to use the unsupported feature &1.
The call to &1 caused a limit to be exceeded.
IBM Universal Manageability Enablement
Management Enablement Feature 1
Management Enablement Feature 2
Management Enablement Feature 3
Management Enablement Feature 4
Management Enablement Feature 5
Management Enablement Feature 6
Management Enablement Feature 7
Management Enablement Feature 8
Management Enablement Feature 9
Management Enablement Feature 10
Management Enablement Feature 11
Management Enablement Feature 12
Management Enablement Feature 13
Management Enablement Feature 14
Management Enablement Feature 15
Management Enablement Feature 16
Management Enablement Feature 17
Management Enablement Feature 18
Management Enablement Feature 19
Management Enablement Feature 20
System Management Operations
CIMOM Server
Common Information Model Object Manager (CIMOM) server access administration.
CIM Class Operations
CIM Qualifier Operations
Create Class
Permission to create a class
Delete Class
Permission to delete a class
Get Class
Permission to retrieve a class
Enumerate Class Names
Permission to retrieve a list of class names
Enumerate Classes
Permission to retrieve a list of classes
Modify Class
Permission to modify a class
Delete Qualifier
Permission to delete a qualifier
Get Qualifier
Permission to retrieve a qualifier
Enumerate Qualifiers
Permission to retrieve a list of qualifiers
Set Qualifier
Permission to set a qualifier
CIMOM server job not submitted. Reason code &1.
CIMOM server has errors during the shutdown. Reason code &1.
CIMOM server job not ended. Reason code &1.
CIMOM server error or warning.
CIMOM server error or warning. Reason code &1.
CIMOM server is in use.
Additional CIMOM Server messages are available in the log file
Not authorized to use the CIM commands.
Environment error &2 is detected. Reason code &1.
Performance data collection is not active.
Performance data is not available for resource class &2.
Access to the CIM Performance Provider
Permission to access the performance data by Metric provider
Create SQL RPG Program
Create SQL COBOL Program
Create SQL PL/I Program
Create SQL C Program
Create SQL FORTRAN Program
Create SQL ILE C object
Create SQL ILE RPG Object
Create SQL ILE COBOL Object
Run SQL Statements
Create SQL ILE C++ Object
Program
Source file
Source member
Precompiler options
Commitment control
Severity level
Print file
Text 'description'
Library
Source margins
Left margin
Right margin
INCLUDE file
Target release
SQL package
Create SQL Package
Relational database
Delete SQL Package
Default collection
Replace
Date format
Time format
Package
IBM SQL flagging
ANS flagging
Allow copy of data
Close SQL cursor
Date separator character
Time separator character
Delay PREPARE
Allow blocking
RDB user
RDB user password
Compile type
Debugging view
Module list
Dynamic user profile
Sort sequence
Language id
Listing output
Object
Object type
Naming
Decimal Point
RDB connect method
Print SQL Information
Change Query Attributes
Query processing time limit
Parallel processing degree
User profile
Force record write
Comment
Type of records
Asynchronous job usage
Apply CHGQRYA to remote
*CURRENT, VxRxMx
To source file
Convert SQL C++ Source
Query options file library
Dynamic default collection
SQL path
SQL rules
Teraspace memory options
Teraspace memory enabled
If teraspace enabled
Storage model
Data model
Compiler options
Decimal result options
Maximum precision
Maximum scale
Minimum divide scale
RPG preprocessor options
Source stream file
SQL INCLUDE directory
Decimal float rounding mode
Second level text
Concurrent access resolution
Debug encryption key
Start SQL Interactive Session
Start DB2 UDB Query Manager
Naming convention
Statement processing
Library option
List type
Data refresh
Allow copy data
Program language
Decimal point
SQL string delimiter
Sort sequence
Language identifier
Library
Advanced Function Printing Fonts/400
&3 received by &1 at &4. (C D I R)
&3 received by procedure &7. (C D I R)
System &1 is powering down. (G C)
System &1 is powering down. (G C)
System &1 is powering down. (G C)
Incorrect use of option &1 for program QSKMAINT can cause damage to data on your system. (C G)
System is scheduled to power off at &4 on &3. (G C 30-180)
Load the volume that contains file &1 on device &2 (C G).
Load next volume on the installation device. (C G)
Library &1 ownership transferred to QDFTOWN (G).
Object and library attributes lost for library &1. (G)
All objects lost from library &1 (G).
Object information lost for some objects in &1. (G)
Journal inherit rules lost for library &1. (G)
Storage limit exceeded for user profile &2. (G)
Object information lost for &1. (G)
Ownership of &1 transferred to QDFTOWN. (G)
Clearing or deleting system library &1. (I C)
User profile &1 damaged. (G)
Defaults used for all user profiles. (G)
User profile &1 cannot be used. Default values used. (G)
Your group job is about to end. (C I)
You have requested to reroute this job. (C I)
Device &25 failed. Recovery ended. (C G R)
Device &25 failed. Recovery ended. (C G R)
Device &25 could not establish sessions. Recovery ended. (C G R)
Device &1 cannot be varied off at this time. (C G)
Controller &1 cannot be varied off at this time. (C G)
Connection list &1 in use (C G)
Connection list &1 in use (C G)
Network server &1 cannot be varied off at this time. (C G)
Resource &1 cannot be deallocated at this time. (C G)
&1 path should not be changed at this time. (C G)
Removing the network server storage link will not allow the network server to vary on. (C G)
From-file record length not equal to expected length. (C I)
File &1 in library &2 member &3 cannot be saved. (C I)
Member &3 of file &1 cannot be restored to a System 36. (G I C)
File &1 was not found on device &2. (C R)
Diskette in device &3 has wrong volume identifier. (C I R)
Diskette in device &3 different from first diskette. (C R)
Diskette in device &3 contains active files. (C R)
File &1 was not restored to library &2 from set &3. (C I R)
File &1 was not restored to library &2 from set &3. (C I R)
Object &4 is in use and cannot be shared. (C I R)
You are not authorized to file &1 in library &2. (C I R)
File &1 of set &3 was not found on device &4. (C R)
File &1 for set &3 was not in correct sequence. (C R)
Starting file &1 for set &3 was not found on device &4. (C R)
Set &3 was not found on device &4. (C R)
SQL data dictionary &1 going to be deleted. (C G)
Data base records may need to be recovered. (G)
Member &2 file &1 at maximum size. (C I)
Key specifications are going to be removed from file &1. (K G)
Change of file &1 may cause data to be lost. (C I)
Not enough storage to change file &1. (C I)
File &1 on node &3 can not be deleted. (C I)
DataLinks cannot be unlinked from file &1. (C G)
DataLink File Manager has already been initialized. (C G)
Writer &1 ready to continue after failure. (G C H 1-99,999)
Writer &1 ready to continue after failure. (H C G)
Attributes of file &4 not supported for device &9. (C G H)
Final form text data in file &4 not supported by device &9. (C G H I)
IGCDTA(*YES) not allowed for device &9. (C H T)
Attributes of file &1 not supported. (G C)
Attributes of file &1 not supported by CPYSPLF (G C).
Remove output from device &9 for writer &1. (G C)
PSF feature grace period ends &10. (G C)
PSF feature grace period ended &10. (G C)
Attributes of file &4 not supported for device &9. (C G H)
DEVTYPE(*SCS) not supported for device &9. (C G H I)
Character per inch of file &4 not supported for device &9. (C G H)
Session with device &1 cannot be established (C R)
Print &10 separator pages for writer &1. (G C 0-9)
Device &4 not available. (C R)
Attributes of file &4 not supported for device &9. (C G T H I)
Page size of file &4 not supported for device &9. (C H T)
Not able to allocate device &4 (C R A)
Device &4 not available. (C R)
Load form type '&4' device &5 writer &1. (G B I H R C)
Load form type '&4' device &5 writer &1. (G B I C)
Starting page exceeds end of file. (C 1-&9)
Starting page is not valid. (C &10-&9)
Records for file &4 will be truncated. (G H)
Error during PTF request. Press Help before replying (C D).
Remove order of PTFs cannot be determined. (C I)
Load first volume of next PTF volume set in device &1. (X G)
Compression not available on all devices. (C I)
IPL mode not set at Normal. (C R)
Previous release system data and current system data found (C I).
Load volume containing library &1 on device &2. (C G)
Load previous tape volume on device &2. (C G)
Load next tape volume on device &2. (C G)
Load correct tape volume on device &2. (C G)
&1 received during &2 command. (C G)
&1 received during &2 command. (C G)
Command prompting ended when user pressed F3 or F12. (C G)
Cannot install from volume &1. (C G)
&1 received during &2 command. (C G R)
&1 received during &2 command. (C G R)
Not all subsystems ended. (C G)
Serviced job did not reply within specified time period (C R).
&5 objects for licensed program &1 option &2 already on media. (C R)
Software agreements have not been accepted. (C G)
Target licensed information already exists (C G).
Load tape for program number &1 (C G).
Problem occurred loading volume into device &1 (X G)
Problem occurred loading volume into device &1 (C G)
Media contains licensed programs you may not want to install (C G).
Make device &2 ready (C G).
Library &6 not registered to product &1 option &2. (C G)
Library &6 not registered to product &1 option &2. (C G)
Folder &5 not registered to product &1 option &2. (C G)
Folder &5 not registered to product &1 option &2. (C G)
Load tape for language feature &1 (C G).
Load another volume into device &4 (C G).
Load next volume, if necessary, in optical device &1 (X G).
Load the next volume in optical device &1. (X G)
Load the next volume in optical device &1. (X G)
Incorrect volume &3 was loaded on optical device &1. (C G)
Load a valid volume containing licensed programs in optical device &1 (X G).
QGPL and QUSRSYS required on volume to continue processing. (C G)
Missing information on volume in device &1 (X G).
Directory not registered. (C G)
Directory not registered. (C G)
Load volume with required software agreements in device &1. (C G)
Removing the *LOCAL directory entry may cause loss of configuration data. (C G)
SQL stopped in job &3/&2/&1 program &4 SQLCODE &5. (G DMP E)
End of forms on printer &3. (C I)
Verify alignment on printer &3. (I G N R E C)
Form feed attachment &4 required on printer &3. (C G H)
End of ribbon on printer &3. (C H I PAGE 1-9999999)
End of ribbon on printer &3. (C I)
Volume &5 density is not correct. (C R)
Paper jam on printer &3. (C R)
Open cover on printer &3. (C H PAGE 1-9999999)
Open cover on printer &3. (C R)
Volume &5 density is not correct. (C R INZ)
File label &4 with creation date &5 already exists on diskette in &3. (C R)
ASCII code of volume &5 on device &4 is not valid (C R).
ASCII code of volume &5 on device &4 is not valid (C INZ R).
Media error while writing to volume &5 on device &4. (C G)
Character on printer &3 not printable. (H I PAGE 1-9999999)
Character on printer &3 not printable. (C R)
Print check on printer &3. (C H PAGE 1-9999999)
Print check on printer &3. (C R)
Forms error on printer &3. (C H PAGE 1-9999999)
Forms check on printer &3. (C R)
End of forms on printer &3. (C H I PAGE 1-9999999)
End of forms on printer &3. (C I)
Operator action required on device &1.
Paper jam on printer &3. (C H PAGE 1-9999999)
Volume &5 is not usable. (C R)
Volume on device &4 at end of data. (C G)
Volume ID does not match cartridge ID (C INZ)
Library device &5 not ready (C R)
Library device storage slots full (C R)
Library device &5 not in library mode (C R)
Volume &5 not last volume for file &40 (C I R).
Load failure occurred on device &4. (C R)
Error while reading labels on device &3. (C R)
Volume &4 damaged for file sequence &40. (C R)
Volume &5 density differs from other volumes (C R INZ).
Diskette in &1 different from first diskette in multivolume file. (C R INZ)
Diskette in device &2 not prepared correctly. (C R INZ)
Code on volume &5 differs from previous volumes (C R).
Diskette in device &2 not written in &4. (C R INZ)
Diskette in &3 has wrong format for save or restore. (C R INZ)
Database busy or error occurred (C R)
Volume identifier not standard for file &2 in library &3 on device &4. (C I R)
Expected volume &6, found volume &5 in device &3. (C I R INZ)
Volume table of contents (VTOC) read error on device &3. (C R INZ)
Diskette volume identifier &2 at device &1 not valid for save or restore. (C I R)
Volume &5 not first for file sequence number &40 (C I R).
Labels on volume &5 device &4 are not valid (C R).
File expiration dates out of sequence (C I R).
Character &5 on printer &3 not printable. (H I PAGE 1-9999999)
Character &5 on printer &3 not printable. (C R)
End of forms on printer &3. (C H I PAGE 1-9999999)
Operator action required on device &4 (C R).
Tape management information not available. (C I R)
Storage extension information not available. (I R)
End of forms on printer &3. (C I)
Problem on device &1 requires operator help.
Print head overheating on printer &3. (C H I PAGE 1-9999999)
Print head overheating on printer &3. (C R)
Verify alignment on printer &3. (I C G R)
Diskette volume identifier &2 in device &1 not valid for save or restore. (C R INZ)
Print check on printer &3. (C H I PAGE 1-9999999)
Either end of forms or forms check on printer &3. (C H I PAGE 1-9999999)
End of forms or forms check on printer &3. (C I)
Error on diskette volume &6 device &1. (C R)
Shared printer &1 is busy.
Volume &5 not first for file sequence number &40 (C R).
A paper jam has occurred on device &1 (C R).
Device &1 not ready (C R).
Problem with device &1 (C R).
Not authorized to data on diskette in device &1 volume &2. (C R)
Not authorized to data on diskette in device &1 volume &2. (C R INZ)
Diskette in device &2 out of sequence. (C R)
One-sided diskette required in device &1. (C R)
Error while reading labels on device &3. (C R INZ)
No authority to access data (C INZ R).
Code on volume &5 differs from previous volumes (C INZ R).
Labels on volume &5 device &4 are not valid (C INZ R).
Volume &5 on device &4 wrong type (C INZ R).
Found &5; expected &6 on device &4. (C I INZ R)
A door, cover, or interlock is open on device &1 (C R).
An input tray needs attention on device &1 (C R).
An output bin needs attention on device &1 (C R).
A printer supply needs attention on device &1 (C R).
A paper path needs attention on device &1 (C R).
Device &4 cannot process loaded volume. (C R INZ)
Cannot initialize tape on device &4. (C R)
DBCS device may be required. (C G)
Cannot access data file on volume &5 device &4 (C INZ R).
Diskette in &1 did not format correctly. (C R INZ)
Check status lights on printer &3. (C H PAGE 1-9999999)
Check status lights on printer &3. (C R)
Save file &2 in &3 already contains data. (C G)
Volume &5 density differs from previous volumes. (C R)
Trace table size should be greater than 128000 (C G)
Diskette in device &1 has extended label area. (C R)
Platen protection tape on device &2 needs replacement. (I C)
Maximum number of records reached for file &1. (C R NOMAX 1-999999)
Data position check on printer &3. (C H PAGE 1-9999999)
Data position check on printer &3. (C R)
Not enough storage on printer &3. (C H PAGE 1-9999999)
Not enough storage on printer &3. (C G)
Load form type '&2' on printer &3. (I C G)
Paper length error on printer &3. (C H PAGE 1-9999999)
Paper length error on printer &3. (C R)
Paper size changed on printer &3. (C H PAGE 1-99999)
Change print band on printer &1.
File &7 will be written over. (C I R)
Diskette in device &1 is write-protected. (C R)
Insert next diskette to receive a copy. (C G)
Device &4 was not ready or next volume was not loaded. (C R)
Diskette inserted in device &3 is not correct. (C R)
Load next tape volume on device &4. (C G)
Load volume &5 on device &4. (C G)
Device &4 was not ready. (C R)
Wrong cartridge type in device &4 (C R).
File &40 not found on volume &5 device &4 (C R).
Found &5; expected &6 on device &4. (C R)
Cannot access data on volume &5 device &4 (C R).
Volume &5 on device &4 wrong type (C R).
No authority to access data file on volume &5 (C R).
Member &1 file &2 in library &3 out of date. (C I)
Change LPI switch on printer &1 to &2. (C G)
Diskette device &3 not ready. (C R)
Extensive error recovery is occurring on diskette in device &1. (C I)
&4 LPI not allowed on printer &3. (C G)
Creation date of file label &4 not matching. (C I)
File label &4 already exists on diskette in &3. (C R)
Query exceeds specified time limit or storage limit (C I)
Diskette in device &1 is not correct format. (C R)
Diskette in device &3 full. (C R)
Volume &5 on device &4 is write protected. (C R)
Volume &5 not loaded or device &4 not ready. (C R)
Found &5; expected &6 on device &4. (C I R)
Diskette in device &2 not prepared. (C R)
Diskette in device &2 not written in &4. (C R)
Wrong continuation volume loaded on device &4 (C R).
Expected creation date and found date not the same (C I R).
Diskette in &3 has wrong format for save or restore. (C R)
File &1 label &5 in device &3 overlapped. (C I)
Diskette in device &1 cannot be used for output. (C R INZ)
Insert next diskette in device &3. (C G)
Diskette in device &3 has volume identifier &4. Insert diskette volume &5. (C I R)
File label &5 not found on diskette in &3. (C R)
Diskette in &2 out of sequence. (C I R)
Active file found on this volume (C I R).
Data file label &7 not found (C R).
Volume table of contents (VTOC) read error on device &3. (C R)
Operation not allowed on diskette in device &1. (C R)
Device &4 cannot process loaded volume. (C R)
&4 characters per inch not allowed on printer &3. (C G)
Device &4 cannot write to loaded volume. (C R)
Hardware failure on device &3.
Volume sequence number exceeds length of field in diskette HDR1 label.
End of VOL list for file &2 in &3 (C I).
Press Ready, Start, or Start/Stop on printer &1.
Diskette device &3 not ready. (C G)
Record not added. Member &1 is full. (C I 9999)
Verify alignment on printer &3. (I C G N R)
Diskette in &1 different from first diskette in multivolume file. (C R)
Files on diskette in device &3 are active. (C I R)
End of list for volume ID reached for file &5. (C I)
End of forms on printer &3. (C H I PAGE 1-9999999)
Character &5 on printer &3 not printable. (H I PAGE 1-9999999)
Character &5 on printer &3 not printable. (C R)
Print error on printer &3. (C R)
Print error on printer &3. (C H I PAGE 1-9999999)
Forms check on printer &3. (C R)
Forms error on printer &3. (C H I PAGE 1-9999999)
Ribbon error on printer &3. (C R)
Ribbon or toner error on printer &3. (C H I PAGE 1-9999999)
Controller &24 on line &23 not contacted. Link problem. (C R)
Controller &24 on line &23 not contacted. Link problem. (C G R)
Controller &24 on line &23 not contacted. Probable remote protocol error. (C R)
Controller &24 on line &23 not contacted. Probable remote protocol error. (C G R)
Controller &24 on line &23 not contacted. Remote station disconnected. (C R)
Controller &24 on line &23 not contacted. Remote station disconnected. (C G R)
Controller &24 on line &23 not contacted. Received frame length too large. (C R)
Controller &24 on line &23 not contacted. Received frame length too large. (C G R)
Call to controller &24 failed. Too many dialing digits. (C R)
Modem or local hardware error on line &23. (C G R)
Line &23 HDLC data link reset. (C G R)
Controller &24 failed. XID not supported. (C G R)
Controller &24 on line &23 not contacted. No IOP storage available. (C R)
Controller &24 on line &23 not contacted. No IOP storage available. (C G R)
Time limit reached while trying to call controller &24. (C R)
Controller &24 on line &23 not contacted. Remote time-out. (C G R)
System cannot call controller &24. No lines available. (C R)
Controller &24 on line &23 not contacted. Call failed. (C R)
Controller &24 on line &23 not contacted. Remote disconnect. (C R)
Controller &24 on line &23 not contacted. Remote disconnect. (C G R)
Call to controller &24 on line &23 failed. Probable local hardware problem. (C R)
Controller &24 not contacted. Configuration problem. (C R)
Controller &24 on line &23 not contacted. XID retry limit reached. (C R)
Controller &24 on line &23 not contacted. XID retry limit reached. (C G R)
Controller &24 on line &23 not contacted. Probable configuration problem. (C G R)
Controller &24 on line &23 not contacted. Remote disconnect. (C R)
Controller &24 on line &23 not contacted. Probable configuration problem. (C R)
Controller &24 on line &23 not contacted. Probable configuration problem. (C G R)
System cannot call out on line &23. Connection list entry is *ANY for the remote number (C N R).
System cannot call out on line &23. Connection list entry error. (C N R)
System cannot call controller &24. No lines available. (C R)
System cannot call out on line &23. No network interfaces available. (C N R)
System cannot call out on line &23. Connection list &40 does not exist. (C N R)
System cannot call out on line &23. Unable to use connection list &40. (C N R)
System cannot call out on line &23. Connection list entry &41 not found. (C N R)
System cannot call out on line &23. Line unusable at this time. (C N R)
Controller &24 not contacted. Probable remote system problem. (C R)
Controller &24 not contacted. Probable remote system problem. (C G R)
Controller &24 not contacted. Probable configuration problem. (C R)
Controller &24 not contacted. Probable configuration problem. (C G R)
Controller &24 on line &23 not contacted. Protocol error. (C R)
Controller &24 on line &23 not contacted. Protocol error. (C G R)
Controller &24 failed. Probable network problem. (C G R)
Temporary network congestion while communicating with controller &24 on line &23. (C G R)
Call on controller &24 failed. Connection list entry is *ANY for the remote number. (C R)
System cannot call out on controller &24. Connection list entry error. (C R)
System cannot call out on controller &24. Unable to use connection list &40. (C R)
System cannot call out on controller &24. Unable to use connection list &40. (C R)
System cannot call out on controller &24. Connection list entry not found. (C R)
Controller &24 on line &23 not contacted. Probable configuration problem. (C R)
Controller &24 on line &23 not contacted. Probable configuration problem. (C G R)
Controller &24 on line &23 not contacted. Local configuration problem. (C R)
Controller &24 on line &23 not contacted. Probable application program problem. (C R)
Controller &24 on line &23 not contacted. Probable configuration problem. (C R)
Controller &24 on line &23 not contacted. Local configuration problem. (C R)
Controller &24 on line &23 not contacted. Probable config problem. (C R)
Controller &24 on line &23 failed. Probable config problem. (C R)
Controller &24 on line &23 not contacted. (C R)
Controller &24 on line &23 not contacted. (C G R)
Call failed for line &23 on network interface &30. (C N R)
Line &23 failed. RESTART CONFIRM packet not received within required time. (C G R)
Controller &24 failed. Logical channel reset or cleared. (C G R)
Controller &24 failed. Probable X.25 network problem. (C G R)
Line &23 failed. Inactivity timeout. (C G R)
Controller &24 on line &23 not contacted. Probable configuration problem. (C R)
Controller &24 on line &23 not contacted. Probable configuration problem. (C G R)
Controller &24 on line &23 not contacted. (C R)
Controller &24 on line &23 not contacted. Probable remote system problem. (C G R)
Controller &24 on line &23 not contacted. (C R)
Controller &24 on line &23 not contacted. (C G R)
Controller &24 contact not successful. Remote system disconnected. (C G R)
Controller &24 failed. Recovery stopped. Probable remote system problem. (C G R)
This message is not used. (C R)
Controller &24 failed. No virtual circuits available. (C G R)
Controller &24 on line &23 not contacted. (C R)
Controller &24 on line &23 not contacted. Probable configuration problem. (C R)
Controller &24 contact not successful. Probable remote system problem. (C R)
Controller &24 on line &23 not contacted. (C R)
Controller &24 on line &23 not contacted. (C R)
Controller &24 on line &23 not contacted. Probable configuration problem. (C R)
Controller &24 on line &23 not contacted. Probable configuration problem. (C G R)
Controller &24 on line &23 not contacted. Probable configuration problem. (C R)
Controller &24 on line &23 not contacted. Probable configuration problem. (C R)
Controller &24 on line &23 not contacted. (C R)
Controller &24 on line &23 not contacted. Probable configuration problem. (C R)
Controller &24 on line &23 not contacted. Probable configuration problem. (C R)
Controller &24 on line &23 not contacted. Configuration problem. (C G R)
Controller &24 on line &23 not contacted. Configuration problem. (C G R)
Controller &24 on line &23 not contacted. (C R)
Controller &24 on line &23 not contacted. Remote system problem. (C G R)
Controller &24 on line &23 not contacted. (C R)
Controller &24 on line &23 not contacted. (C G R)
Controller &24 on line &23 not contacted. Probable configuration problem. (C G R)
Controller &24 on line &23 not contacted. Probable configuration problem. (C G R)
Controller &24 contact not successful. Probable remote system problem. (C R)
Controller &24 on line &23 not contacted. (C R)
Controller &24 contact not successful. Probable remote system problem. (C R)
Controller &24 contact not successful. Logical channel reset or cleared. (C G R)
Logical channel to controller &24 reset or cleared. (C R)
Controller &24 contact not successful. Probable remote system problem. (C G R)
Controller &24 on line &23. Probable configuration problem. (C G R)
Controller &24 on line &23. Probable configuration problem. (C G R)
The call for line &23 on network interface &30 failed, no channels available. (C N R)
The call for line &23 on network interface &30 failed, B channel is busy. (C N R)
Call failed for line &23 on network interface &30. (C N R)
Call on line &23 failed, semi-permanent connection not supported by the network (C N R).
The call for line &23 on network interface &30 failed, no response from the network. (C N R)
Network interface &30 failed, possible network problem. (C G R)
Controller &24 on line &23 not contacted. (C R)
Controller &24 on line &23. Probable configuration problem. (C G R)
Insufficient resources for controller &24. (C G R)
Line &23 on network interface &30 not contacted. (C N R)
Queue full on controller &24. (C G R)
Call for line &23 on network interface &30 failed, probable configuration problem. (C N R)
Queue full on controller &24. (C G R)
Call for line &23 on network interface &30 failed, possible network problem. (C N R)
Line &23 on Network Interface &30 not contacted. A protocol error has occurred. (C N R)
Line &23 not contacted. (C N R)
Line &23 not contacted, insufficient resources. (C N R)
Line &23 on network interface &30 failed, call cleared. (C G R)
Line &23 on network interface &30 failed, possible network problem. (C G R)
Line &23 on Network Interface &30 failed. A protocol error has occurred. (C G R)
Network interface &30 failed, retry limit reached. (C G R)
Network interface &30 failed, disconnect received from the network (C G R).
Network interface &30 failed, TEI assignment failed. (C G R)
Call to controller on line &23 failed. Network or hardware problem. (C G R)
HDLC link establishment failed on line &23. (C G R)
Controller &24 on line &23 failed. Probable insufficient resources. (C G R)
Not enough resources for controller &24. (C G R)
Controller &24 DCE cleared. (C R)
Controller &24 failed. Remote system problem. (C G R)
Network interface &30 failed, TEI removed. (C G R)
Line &23 on network interface &30 failed, call cleared. (C G R)
Call for line &23 on network interface &30 failed, call cleared. (C N R)
Network interface &30 failed. No response from NT. (C G R)
Network interface &30 failed. Possible NT problem. (C G R)
Network interface &30 failed. Possible network problem. (C G R)
Network interface &30 failed. Possible NT problem. (C G R)
Network interface &30 failed. Loss of power from NT. (C G R)
Network interface &30 failed. Probable local wiring problem. (C G R)
Controller &24 on line &23 not contacted. (C R)
Controller &24 contact not successful. (C R)
Controller &24 contact not successful. Probable X.25 network problem. (C G R)
Controller &24 failed. No virtual circuits available. (C R)
Controller &24 failed. Duplicate user facilities (C G R).
Controller &24 contact not successful. Duplicate user facilities. (C R)
Controller &24 contact not successful. Probable remote system problem. (C G R)
Network interface &30 failed. Unable to detect power source from NT. (C G R)
Controller &24 contact not successful. (C R)
Incoming data on line &23 lost. (C G R)
Controller &24 failed. Probable remote system or network problem. (C G R)
Controller &24 failed. Remote system problem. (C G R)
Call request on line &23 failed. Probable network failure. (C G R)
Controller &24 failed. Remote system problem. (C G R)
Controller &24 failed. Probable remote system problem. (C G R)
Controller &24 failed. Probable remote system problem. (C G R)
Controller &24 failed. Probable remote system or network problem. (C G R)
Call to controller on line &23 not answered. Probable remote problem. (C G R)
Call from controller on line &23 failed. Probable network or hardware problem. (C G R)
Controller &24 failed. No virtual circuits available. (C R)
DCE or local hardware on line &23 failed. (C G R)
DCE on line &23 not turned on or not in data mode. (C G R)
Dialing digits for controller &24 not valid. (C R)
Call to controller &24 on line &23 rejected. Probable network or DCE problem. (C R)
Call to controller &24 failed. X.21 station busy. (C R)
Selection signals used to call controller &24 not correct. (C R)
Parity error on line &23. (C G R)
Not authorized to call controller &24 on line &23. (C R)
Connection number to controller &24 has changed. (C R)
Connection number for controller &24 failed. Probable connection number not valid. (C R)
Call to controller &24 failed. Probable remote DCE problem. (C R)
Controller &24 not ready. (C R)
Controller &24 not ready. (C R)
Call request on line &23 to controller &24 failed. Remote modem power may be off. (C R)
Network rejected call request to controller &24 on line &23. (C R)
Controller &24 contact not successful. Probable network problem. (C R)
Call request on line &23 failed. Notify network administrator. (C G R)
Network rejected call request to controller &24 on line &23. (C R)
Temporary network congestion while trying to contact controller &24. (C R)
Long term network congestion on line &23. (C G R)
Network to controller &24 not operational. (C R)
Controller &24 does not support X.21 SHM. (C R)
Local system canceled call to remote system &24. (C R)
Station address from controller &24 not configured. (C R)
Controller &24 reconnection not expected. (C R)
Controller &24 failed. No data received. (C G R)
Attempt to connect with controller &24 exceeded time limit. (C G R)
Controller &24 DCE cleared. (C G R)
Station address from controller &24 not configured. (C G R)
Attempt to connect with controller &24 exceeded time limit. (C R)
Call to controller &24 on line &23 rejected. Probable network or DCE problem. (C G R)
Call to controller &24 failed. X.21 station busy. (C G R)
Selection signals used to call controller &24 not correct. (C G R)
Not authorized to call controller &24 on line &23. (C G R)
Connection number to controller &24 has changed. (C G R)
Modem on line &23 not ready. (C G R)
Line &23 failed. Probable hardware failure. (C G R)
Connection number for controller &24 failed. Probable connection number not valid. (C G R)
Call to controller &24 failed. Probable remote DCE problem. (C G R)
Controller &24 not ready. (C G R)
Controller &24 not ready. (C G R)
Call request on line &23 to controller &24 failed. Remote modem power may be off. (C G R)
Network rejected call request to controller &24 on line &23. (C G R)
Network rejected call request to controller &24 on line &23. (C G R)
Network to controller &24 not operational. (C G R)
Controller &24 failed. Local hardware problem. (C G R)
Controller &24 not contacted. (C R)
Controller &24 contact not successful. Remote system problem. (C R)
Controller &24 contact not successful. Probable remote system problem. (C R)
Controller &24 contact not successful. Probable remote system problem. (C R)
All sessions to controller &24 failed. Data may be lost. (C G R)
Controller &24 failed. Remote system problem. (C G R)
Controller &24 on line &23 not contacted. Remote time-out. (C R)
Controller &24 contact not successful on line &23. (C R)
Controller &24 failed. Probable timing problem. (C G R)
Controller &24 failed. Not found on local area network. (C G R)
Line &23 failed. Probable cabling or hardware problem. (C G R)
Contact not successful on controller &24. LPDA test in progress. (C R)
Controller &24 not found on token-ring network. (C G R)
Controller &24 failed. Probable remote station problem. (C G R)
Contact not successful on controller &24. LPDA test in progress. (C G R)
Controller &24 contact not successful. Probable remote station problem. (C R)
Line &23 failed. (C G R)
Line &23 failed - LES error (C G R)
LEC call failure on line &23. (C G R)
LEC ARP failure on line &23. (C G R)
LECS Configure failure on line &23. (C G R)
HDLC connection time-out occurred on line &23. (C N R)
NWI &30 failed, no switch response (C G R)
Line &23 failed (C G R)
Call on line &23 failed. Too many dialing digits. (C N R)
Dialing digits for line &23 not valid. (C N R)
Time limit reached while trying to call using line &23. (C N R)
Line &23 not contacted. Call failed. (C N R)
Call on line &23 failed. Probable local hardware problem. (C N R)
Controller &24 on line &23 not contacted. (C R)
Line &23 failed. Probable configuration problem. (C G R)
Line &23 not contacted. Internal system failure. (C N R)
Line &23 not contacted. Internal system failure. (C N R)
Line &23 contact not successful on network interface &30. Configuration error (C N)
Manually dial &40 for line &23. (C G N)
Manually dial &40 for controller &24 line &23. (C G)
Device &25 is not responding normally. (C G R)
Cannot communicate with device &25. Probable local system problem. (C R G)
Dial pending for line &23. (C G)
Controller &24 contact unsuccessful. Probable remote system problem. (C R)
Controller &24 contact not successful. Remote system disconnected. (C R)
Controller &24 contact not successful. Logical link protocol error detected.(C G R)
Controller &24 contact not successful. Logical link protocol error detected. (C R)
Controller &24 not contacted. Probable configuration problem. (C R)
Line &23 is ready to answer. (C G N)
Call for line &23 on network interface &30 failed, internal system failure. (C N R)
Call for line &23 on network interface &30 failed, internal system failure. (C N R)
Line &23 is ready to answer. (C G N)
Line &23 failed. Probable local hardware problem. (C G R)
Controller &24 failed. Logical channel reset or cleared. (C G R)
Controller &24 contact not successful. Logical channel reset or cleared. (C G R)
Controller &24 contact not successful. Logical channel reset or cleared. (C R)
Line &23 failed. Probable local modem problem. (C G R)
No activity on line &23. Line disconnected. (C G R)
Line &23 failed. Probable local modem problem. (C G R)
Controller &24 failed. Remote station disconnected. (C G R)
Controller &24 failed. Probable remote protocol error. (C G R)
Controller &24 failed. Link problem. (C G R)
Time-out on line &23. System may be overcommitted. (C G R)
Line &23 failed. Probable link problem. (C G R)
Controller &24 failed. Resources not sufficient. (C G R)
Controller &24 failed. Packet-level time-out. (C G R)
Controller &24 contact not successful. (C R)
Controller &24 contact not successful. Packet-level time-out.(C G R)
Call from controller &24 not accepted during recovery. (C G R)
Call from controller &24 not accepted during recovery. (C R)
Controller &24 failed. Probable remote system problem. (C G R)
Controller &24 failed. Remote disconnect. (C G R)
Controller &24 failed. Configuration or remote system problem. (C G R)
Line &23 failed. Probable modem problem. (C G R)
Call on line &23 failed. Data link occupied error. (C N R)
Line &23 failed. (C G R)
Line &23 failed. Probable local hardware problem. (C G R)
Controller &24 failed. Logical link protocol error detected.(C G R)
Line &23 failed. No polls from primary. (C G R)
Time between sync characters exceeded. (C G R)
Line &23 response time limit reached. (C G R)
Controller &24 response time limit reached. (C G R)
Data on line &23 lost. Probable line or modem failure. (C G R)
Controller &24 failed. Facility field too long. (C G R)
Controller &24 contact not successful. (C R)
Internal system failure while processing with controller &24. (C G R)
Contact not successful on controller &24. Internal system failure. (C R)
Internal system failure. Contact not successful on controller &24. (C R)
Contact not successful for controller &24. Internal system failure. (C G R)
Contact not successful on controller &24. Internal system failure. (C R)
Controller &24 contact not successful. (C R)
Place modem for line &23 in data mode. (C G)
Not enough resources for controller &24. (C R)
Call to controller on line &23 failed. Probable local hardware problem. (C G R)
Line &23 failed. Probable configuration problem. (C G R)
Line &23 failed. No IOP storage available. (C G R)
Call to controller on line &23 failed. Probable local hardware problem. (C G R)
Controller &24 failed. Data buffer exceeded (C G R)
Contact not successful for controller &24. Data buffer exceeded. (C G R)
Contact not successful for controller &24. Data buffer exceeded. (C R)
Incoming data on line &23 lost. (C G R)
Line &23 failed. Probable remote system problem. (C G R)
Time-out on line &23. Probable remote system problem. (C G R)
Call on line &23 failed. Time-out occurred. (C N R)
Call on line &23 failed. Modem aborted call. (C N R)
Call on line &23 failed. Dial tone error. (C N R)
Call on line &23 failed. Remote busy. (C N R)
Call on line &23 failed. Forbidden call. (C N R)
Call on line &23 failed. No answer tone. (C N R)
Call on line &23 failed. No answer. (C N R)
Call on line &23 failed. (C N R)
Call on line &23 failed. Modem command not valid. (C N R)
Modem connection error on line &23. Potential modem problem. (C N R)
Line &23 failed. Probable communication subsystem problem. (C G R)
Line &23 failed. Local configuration problem. (C G R)
Line &23 failed. Local configuration problem. (C G R)
Line &23 failed. Local configuration problem. (C G R)
Controller &24 failed. Probable remote system problem. (C G R)
Line &23 failed. Probable local hardware problem. (C G R)
Controller &24 failed. Probable local system problem. (C G R)
Controller &24 failed. Remote system failure. (C G R)
Line &23 failed. Probable modem problem. (C G R)
Call to controller &24 on line &23 failed. Time-out occurred. (C R)
Call to controller &24 on line &23 failed. Modem aborted call. (C R)
Call to controller &24 on line &23 failed. Dial tone error. (C R)
Call to controller &24 on line &23 failed. Remote busy. (C R)
Call to controller &24 on line &23 failed. Forbidden call. (C R)
Call to controller &24 on line &23 failed. No answer tone. (C R)
Call to controller &24 on line &23 failed. No answer. (C R)
Call to controller &24 on line &23 failed. (C R)
Call to controller &24 on line &23 failed. Modem command not valid. (C R)
Controller &24 not replying. Remote system or configuration problem. (C R)
Controller &24 failed. Remote station problem. (C G R)
Controller &24 failed. Probable remote system problem. (C G R)
Controller &24 failed. Probable remote system problem. (C G R)
Call on line &23 failed, packet mode connection not supported by the network (C N R).
Line &23 failed while attached to network interface &30. Network no longer responding. (C G R)
Line &23 contact not successful on network interface &30. Network not responding. (C N R)
Line &23 failed while attached to network interface &30. Potential cabling problem. (C G R)
Line &23 contact not successful on network interface &30. Potential cabling problem. (C N R)
Controller &24 failed. Probable local system problem. (C G R)
Line &23 failed. Probable cabling or hardware problem. (C G R)
Line &23 contact not successful on network interface &30. Addressing problem encountered. (C N R)
Call for line &23 on network interface &30 failed, call cleared. (C N R)
Network interface &30 failed. Local configuration problem. (C G R)
Network interface &30 failed. Local configuration problem. (C G R)
Network interface &30 failed. Local configuration problem. (C G R)
Call for line &23 on network interface &30 failed, call cleared. (C N R)
Line &23 failed while attached to network interface &30. Network is not ready. (C G R)
Line &23 contact not successful on network interface &30. Network is not ready. (C N R)
Line &23 failed while attached to network interface &30. Addressing problem encountered (C G R)
Network interface &30 failed. Probable communication subsystem problem. (C G R)
Controller &24 failed. Maximum retry limit reached. (C G R)
Controller &24 not contacted, connect retry limit reached. (C G R)
Controller &24 contact not successful. Connect retry limit reached. (C R)
Controller &24 on line &23 not contacted. Remote disconnect. (C G R)
Controller &24 on line &23 not contacted. Remote disconnect. (C R)
Controller &24 not contacted. Call out request failed. (C R)
Line &23 failed. Protocol mismatch. (C G R)
Call to controller &24 failed. Dialing digit not valid. (C R)
Line &23 failed. Network configuration problem. (C G R)
Network interface &30 failed. Cable or hardware problem. (C G R)
Network interface &30 failed. Communication link problem. (C G R)
Contact not successful on controller &24. Network interface is busy (C G R).
Contact not successful on controller &24. Exceeded maximum controllers (C G R).
Contact not successful for line &23. Protocol mismatch. (C G R)
Line &23 failed. Probable configuration problem. (C G R)
Call for line &23 failed, possible network problem. (C G R)
Controller &24 contact not successful. Probable remote system problem. (C R)
Controller &24 contact not successful. Probable remote system problem. (C G R)
Line &23 failed. Protocol mismatch. (C G R)
Contact not successful for line &23. Probable configuration problem. (C G R)
Line &23 failed. Probable local hardware problem. (C G R)
Line &23 failed. Probable modem problem. (C G R)
Line &23 on network interface &30 failed. Probable configuration problem. (C G R)
Controller &24 contact not successful on line &23. (C R)
Controller &24 failed. XID retry limit reached. (C G R)
Controller &24 failed. Probable configuration problem. (C G R)
Controller &24 failed. Probable remote system problem. (C G R)
Controller &24 failed. Probable configuration problem. (C G R)
Controller &24 failed. Protocol error. (C G R)
Controller &24 failed. Remote system problem. (C G R)
Controller &24 failed. Probable remote system problem. (C G R)
Controller &24 failed. Configuration problem. (C G R)
Controller &24 failed. Probable configuration problem. (C G R)
Controller &24 failed. Probable remote system problem. (C G R)
Controller &24 failed. Probable remote system problem. (C G R)
Controller &24 failed. Probable internal system failure. (C G R)
Controller &24 failed. Remote time-out. (C G R)
Line &23 failed. HDLC frame retry limit exceeded. (C G R)
Line &23 failed. HDLC frame retry limit exceeded. (C N R)
HDLC link establishment failed on line &23. (C N R)
HDLC link establishment failed on line &23. (C N R)
Line &23 failed. HDLC link disconnected. (C G R)
Line &23 HDLC data link reset. (C G R)
Line &23 failed. HDLC data link not active. (C G R)
Controller &24 failed. Probable network problem. (C G R)
Line &23 failed. HDLC link disconnected. (C G R)
Controller &24 failed. Probable remote system problem. (C G R)
Controller &24 failed. Probable remote system problem. (C G R)
Controller &24 failed. Probable remote system problem. (C G R)
Controller &24 failed. Probable remote system problem. (C G R)
Controller &24 contact not successful. Not found on local area network. (C R)
Controller &24 contact not successful. Remote system problem. (C R)
Controller &24 contact not successful. Remote system problem. (C R)
Controller &24 contact not successful. Remote system problem. (C R)
Controller &24 contact not successful. Logical channel recovering from error. (C G R)
Controller &24 contact not successful. Probable local system problem. (C R)
Internal system failure on line &23. (C G R)
Internal system failure on line &23. (C G R)
Controller &24 failed. Internal system failure. (C G R)
Controller &24 failed. Internal system failure. (C G R)
Internal system failure on line &23. (C G R)
Controller &24 failed. Internal system failure. (C G R)
Internal system failure on network interface &30. (C G R)
Internal system failure on network interface &30. (C G R)
Controller &24 failed. Internal system failure. (C G R)
Internal system failure on line &23. (C G R)
Unable to contact DLUS for controller &24. (I R)
Controller &24 for DLUR support failed. (I R)
Diskette in device &1 has extended label area that is not displayed.
Sector size of diskette in &2 not valid. (C R INZ)
File label expiration date &5 on diskette in &3 has not been reached.(C I)
Creation date of file and creation date on command not same. (C I)
Cannot clear diskette in device &3. (C R)
Cannot process diskette in device &3. (C R)
Diskette in device &3 not correct. (C R)
Diskette format in device &2 not valid. (C R)
Code of diskette in &2 not valid. (C R INZ)
Format of diskette in device &2 not correct. (C R INZ)
Diskette in &1 will not be reorganized. (C I)
Cannot initialize volume on device &4. (C R)
Volume on device &4 is write protected (C R).
Volume on device &4 cannot be processed (C R).
Volume on device &4 cannot be processed (C R INZ).
End of VOL list for device &4 (C I).
Cannot overwrite file on device &4. (C R)
One-sided diskette in device &3. (C R)
Diskette in device &1 is write-protected. (C R)
Active file &4 found on volume &2 (C I).
Data on diskette in &1 not accessible for processing. (C R)
Volume &5 on device &4 wrong type (C I R).
Defective diskette in device &5. (C R)
Active files on diskette in device &1. (C I R)
Key store file &1 needs retranslation. (C G)
Data on diskette in device &1 cannot be accessed. (C I R)
VTOC indicates one-sided diskette in device &1. (C R)
Cartridge &2 on device &1 not valid. (C "cartridge id")
No volume to mount on device &1. (C "cartridge id")
File cannot be duplicated (C I).
Ensure you have sufficient authority. (I C)
Repeated command nesting causes slow performance.
Receiver &1 in &2 never fully saved. (I C)
*OFF resets all ASP recovery times (C G)
Current version of *&4 object not from last save. (C I)
Receiver &1 in &2 is attached. (I C)
Restore date of *&4 object not same as in journal. (C I)
Entry not journaled to journal &1 in &2. (C R)
ENDCMTCTL requested with changes pending. (RB C CM)
Commitment control operation not currently allowed. (R C)
End rollback may cause unpredictable results due to pending Alter Table operation. (C G)
All DBCS devices using DBCS font table &1 must be varied off before deleting the table. (C G)
Distributions pending for User ID &1 &2. (C G)
Duplicate directory data from system &1 exists (C I).
Automatic configuration turned off. Turn it on? (Y N)
Controller &1 exists. Delete and add new one? (Y N)
User profile &1 exists. Add user to directory? (Y N)
Device &1 exists. Delete and add new one? (Y N)
Auto create controllers turned off. Turn it on? (Y N)
Top cover or front door not closed for tape device &25.
Tape reel missing for tape device &25.
Tape reel inverted for tape device &25.
Tape reel beginning-of-tape marker missing on tape device &25.
Tape reel not seated correctly on tape device &25 supply hub.
The address switch setting has been changed on device &25.
The address switch failed on tape device &25.
Tape controller &26 or tape device &25 failed.
Tape device &25 not ready.
Tape on tape device &25 is damaged.
Tape controller &26 error can be recovered.
Tape device &25 error can be recovered.
Tape device &25 busy.
Tape device &25 not ready or not loaded.
Tape on tape device &25 is damaged.
Tape device &25 not communicating with Tape I/O Processor.
Tape device &25 returning a busy status.
Error log full in Tape I/O Processor &26.
The usage limit for product &1, feature &3 has been increased. (G)
Usage limit increase must be authorized. Press Help before replying. (C G)
Verify file systems to be converted. Press Help before replying. (C G)
Lost contact with NetWare server &1.
Spawned (child) process &3/&2/&1 is stopped. (G C)
Resource &1 cannot be varied off at this time. (C G)
System &1 cannot be varied off at this time. (C G)
Do you want to send data to IBM by activating PM Agent? (I G C)
Device &1 cannot be varied off at this time. (C G)
Cluster resource group &1 is failing over from node &2 to node &3. (G C)
Cluster resource groups are failing over to node &1. (G C)
Data missing from performance member &3. (I C)
System value QRETSVRSEC currently has a value of 0. (G R C)
Electronic Service Agent has not been activated. (I)
Command &2 created in library &3.
Program &1 in &2 changed.
No change required for program &1 in &2.
&1 programs changed. &2 programs did not require change.
CL source retrieved for &6 &4 in &5.
Retrieved CL source in member &3 requires sequencing.
Display of program &1 in &2 complete.
PRTCMDUSG command completed.
&1 member conversions successful, &2 not successful.
Program &1 not created because *NOGEN specified.
Program &1 created in library &2.
Module &1 created in library &2.
Module &1 not created because *NOGEN specified.
Data area &1 created in library &2.
Subsystem &3 prestart job entry for program &1 in &2 is no longer active.
System name will be changed to &1 at IPL.
Network attribute &1 changed to &2 in &3 by &4/&5/&6.
Network attribute &1 changed to &2 by &3/&4/&5.
Network attribute 'Network node servers' changed by &1/&2/&3.
Activation group &2 deleted.
&1 activation groups deleted.
Class &1 created in library &2.
Class &1 in library &2 changed.
Cleanup of job tables completed.
System values retrieved.
System values restored.
Network attributes retrieved.
Network attributes restored.
Time zone description &1 changed.
Time zone description &1 created.
CRTPFRDTA completed - &1 members built, &2 not built
Performance monitor &3/&2/&1 submitted to job queue &4 in &5.
Performance monitor not started.
Performance collection &3/&2/&1 submitted to job queue &4 in &5.
End Performance Collection command submitted for job &3/&2/&1.
Performance data files successfully converted.
Performance tools files successfully converted.
Performance thread data successfully converted.
CRTPFRDTA completed normally.
CRTPFRDTA ended - code &1&2.
End Performance Monitor command submitted for job &3/&2/&1.
ARM trace session successfully started.
ARM trace session successfully stopped.
Management collection object &1 in library &2 changed.
CRTPFRSUM completed normally.
Program &1 completed successfully.
Label location list printout was created.
Label &1 location successfully updated.
*&3 object &1 created in library &2.
No errors detected by CHKPRDOPT.
Firmware product created.
CPC1115 Class &1 in library &2 not found.
CPC1116 Program &1 in library &2 not found.
CPC1117 Routing data does not match routing entry.
CPC1118 Maximum number active jobs for routing entry reached.
CPC1119 No authority to class &1 in &2.
CPC1120 No authority to program &1 in &2.
CPC1121 No storage requested for storage pool.
CPC1122 Function check occurred while trying to start job.
Subsystem &1 cannot start prestart job &2.
ENDJOBABN issued against job &3/&2/&1 by user &4.
Job &3/&2/&1 was ended by user &4.
Job &3/&2/&1 was ended by user &4.
Spooled output ended for job &3/&2/&1.
User name no longer valid.
Job &3/&2/&1 changed by &4.
Group profile &1 cannot be allocated.
DSCJOB started for job &3/&2/&1.
Not authorized to subsystem.
Maximum number of jobs active for work station entry.
Shared pool &1 changed.
Active shared pool &1 changed.
Shared pool &1 may not have been changed.
Shared pool &1 not changed.
CPC1138 Library on library search list deleted.
System value &1 changed to &2.
&5K of &3 brought to pool with &6K unused.
&5K of &2 brought to pool with &6K unused.
Member &3 purged from main storage.
Object &2 purged from main storage.
Pool &1 has been cleared.
*MACHINE pool changed.
Job &3/&2/&1 held by user &4 with option SPLFILE(*NO).
Job &3/&2/&1 released by user &4.
SIGTERM signal sent to job &3/&2/&1.
Time limit reached for SIGTERM signal handler.
Job description specified in work station entry cannot be used.
CPC1170 Library &1 on library list cannot be allocated.
Job connected again. Sign on information ignored.
Group job ended because of ENDGRPJOB command.
Group job ended because of SIGNOFF command or entire group being ended.
Job ended because device error occurred.
Job ended due to error in other job of system request pair.
Work station &1 cannot be used with file &2 in library &3.
CPC1203 Object access error during routing.
Subsystem is ending controlled.
Subsystem ending immediately.
Immediate End Prestart Jobs (ENDPJ) command issued.
Controlled End Prestart Jobs (ENDPJ) command issued.
Prestart job ending due to maximum use.
Prestart jobs are ending because of errors.
Prestart job ending caused by CHGPJE.
Prestart job ending; too many prestart jobs not in use.
Special handling program completed successfully.
Applying of PTFs completed.
Applying of PTFs for product &1 completed successfully.
Job ended abnormally.
Job ended abnormally.
This job ended abnormally.
Job ended abnormally because of error code MCH&1.
Job &3/&2/&1 submitted to job queue &4 in library &5.
Job &3/&2/&1 held by user &4 with option SPLFILE(*YES).
Job ended abnormally.
Job &3/&2/&1 ended abnormally.
System job &3/&2/&1 ended abnormally.
LOGLMT changed for job &3/&2/&1.
ENDJOB started for job &3/&2/&1.
Job &3/&2/&1 ended from job queue.
Job &3/&2/&1 spooled output previously deleted.
Job &3/&2/&1 ended from job queue by user &4.
Job &3/&2/&1 is ending immediately.
Job &8/&7/&6 submitted for job schedule entry &3 number &4.
Job schedule entry &3 number &4 added.
Job schedule entry &3 number &4 removed.
Job schedule entry &3 number &4 successfully held.
Job schedule entry &3 number &4 successfully released.
Job submitted for job schedule entry &3, but warnings exist.
Job submitted for job schedule entry &3, but warnings exist.
Job schedule entry &3 added, but warnings exist.
Job schedule entry &3 number &4 released and removed.
&3 entries successfully removed.
&3 entries successfully held.
&3 entries successfully released.
CPC1249 Not authorized to library &1 in library list.
CPC1250 Not authorized to group profile &1.
Cannot allocate message queue &1 in &2.
MSGQ &1 in &2 deleted or damaged.
CPC1289 JOBD(*USRPRF) specified but profile defines no JOBD.
Job schedule entry &3 number &4 changed.
Job schedule entry &3 changed, but warnings exist.
IPL attribute &1 changed to &2.
PTF group &1 deleted.
&1 PTFs deleted.
PTF &1-&2 &3 deleted.
Subsystem description &1 created in &2.
Subsystem description &1 in library &2 changed.
Printer output created.
Active subsystem description &1 in &2 changed.
*BASE pool changed.
Job description &1 created in library &2.
Job description &1 in library &2 changed.
Printer output created.
Tracing started for ASP &1 with name &2.
Tracing ended for ASP &1 with name &2.
Trace data cleared on ASP &1 with name &2.
ASP balance function &1 started.
&3 started for ASP &1 with name &2.
Disk balancing ended for ASP &1 with name &2.
&1 request processed.
Breakpoint &2 re-defined for program &1.
Call out command successful.
Contact open and current on.
Contact open and current off.
Contact closed and current on.
Contact closed and current off.
Contact operate command successful.
Disconnect command successful.
Transmit speed set at &1 bits per second.
Transmit speed command completed.
Audience path &1 removed.
Audience path &1 changed.
Audience path &1 added.
Module &1 removed.
Module &1 changed.
Course &1 opened.
Course &1 closed.
Module &1 added.
Course &1 removed.
Course &1 added to the list of available courses.
Course &1 changed.
Student &1 removed.
Course &1 converted.
Make changes or press Enter to confirm.
Power on and off schedule successfully changed for &2.
Power on and off schedule defaults changed for &1.
Default values successfully changed.
Cleanup options successfully changed.
Cleanup options changed, but cleanup not started.
Cleanup ended.
Cleanup started.
Cleanup will start at &1.
Cleanup has completed.
Cleanup started, but not scheduled to run.
Cleanup started and will run at scheduled power off time.
Local device addresses printed.
&1 made unavailable.
&1 made available.
Device &1 renamed &2.
Controller &1 renamed &2.
Line &1 renamed &2.
Directory information was successfully retrieved.
Options changed for printer output &1.
Printer output &1 held.
Printer output &1 deleted.
Printer output &1 released.
Printer output &1 moved to printer &2.
Attempting to start printer &2 for printer output &1.
Attempting to restart printer &2 for printer output &1.
Warning: Part of printer output &1 will be lost.
Printer &1 stopped.
Attempting to start printer &1.
Attempting to restart printer &1.
Problem information created for &1.
Message sent to all users.
Tape &2 successfully initialized.
Backup job submitted.
&1 backup successfully completed.
&1 backup options changed.
Tape set &2 successfully initialized.
Some system options not changed.
Some system options not changed. Some changed and require IPL.
Some passwords not changed. Try again later.
Passwords successfully changed.
System options successfully changed; IPL required.
System options successfully changed.
Job &1 released.
Job &1 held.
Job queue &1 held.
Job queue &1 released.
User &1 successfully signed off.
Disk Space Information was successfully collected.
Backup schedule successfully changed.
Data collection schedule successfully changed.
Backup schedule successfully changed, but will not be used.
Library list changed.
Library &1 created.
Object changed for &1 in &2 type &3.
Days used count field reset for all objects.
Object not changed for &1 in &2 type *&3.
Reclaim of library &1 complete.
All &4 objects of type *&3 deleted.
&1 objects duplicated.
No libraries to display.
Object &1 in &2 type *&3 deleted.
Object &1 in &2 type *&4 renamed &3.
Object &1 in &2 type *&4 moved to library &3.
Library &1 deleted.
Library &1 renamed to &2. Errors occurred.
Library &1 added to library list.
Library &1 removed from library list.
Current library changed to &1.
Library &1 cleared.
&3 entries changed in EPT &1 in library &2.
&1 entries are different.
Current EPT changed to &1 in &2.
All objects of type *&3 deleted.
All &4 *&3 objects in ASP group &5 deleted.
Object authority granted.
Object authority revoked.
DST security officer password changed.
User profile &1 created.
User profile &1 changed.
Ownership of object &2 in &1 type &3 changed.
Authorization list &1 created.
Users added, &1 authorization lists processed.
Users changed, &1 authorization lists processed.
Users removed, &1 authorization lists processed.
IBM-supplied service tools user ID password did not change.
Authority holder created.
Authority holder deleted.
Object authorities changed.
Object authorities changed.
Ownership of object &2 type &3 transferred to user profile &1.
User &1 added; press F5 (Refresh).
User &1 changed.
User &1 copied from user &2.
Primary group of object &2 type &3 changed to user profile &1.
Object changed.
&1 objects successfully changed.
Function &1 usage information changed.
User &1 removed.
User &1 added, but not enrolled in OfficeVision/400.
User &1 changed but not enrolled in OfficeVision/400.
User &1 added but not enrolled in OfficeVision/400.
Object auditing value changed for &1 in &2 type *&3.
Auditing value changed for user profile &1.
Auditing value changed for all specified objects.
Auditing value changed for all specified user profiles.
Primary group of object &2 in &1 type &3 changed.
Command completed successfully but violations found.
Auditing value changed for &1 objects.
Command completed successfully.
Generated UIDs will start at &2, GIDs at &4.
&1 user profiles have default passwords of which &2 have the status of *ENABLED.
User profile &1 created with STATUS set to *DISABLED.
User profile &1 changed but STATUS set *DISABLED.
Password changed successfully.
Message queue &1 in library &2 cleared.
Library &1 copied to library &2.
Your library list for your job was changed.
Save or restore option completed successfully.
Positioned to &1 of type &2 in library &3
Positioned to &1 in library &3
Positioned to &1
Positioned to position for &1 of type &2 in library &3
Positioned to position for &1 in library &3
Positioned to position for &1
Positioned to &1 of type &2
Positioned to position for &1 of type &2
Positioned to top of list
Positioned to bottom of list
&2 message queue &1 created again.
Job ended. Cancel message received at command processor.
Reply List entry with sequence number &1 added to system reply list.
System reply list entry with sequence number &1 changed.
No changes specified for reply list entry with sequence number &1.
Reply list entry with sequence number &1 removed from system reply list.
*ALL entries removed from system reply list.
System reply list created again.
Message files have been merged.
&1 message queues were changed.
&1 message files were changed.
Reply sent to message.
Messages not needing a reply were removed.
&1 messages removed.
Job ended due to installing a new software release.
Line description &1 created.
Description for device &1 deleted.
Description for controller &1 deleted.
Description for line &1 deleted.
Vary on completed for device &1.
Vary off completed for device &1.
Vary on completed for line &1.
Vary off completed for line &1.
Vary on completed for controller &1.
Vary off completed for controller &1.
Class-of-service description &1 changed.
Mode description &1 created during IPL.
Description for device &1 changed.
Controller description &1 changed.
Description for line &1 changed.
Class-of-service &1 created during IPL.
Damaged mode description &1 deleted during IPL.
Damaged class-of-service &1 deleted during IPL.
Table &1 in library &2 created.
Edit description &1 in library &2 created.
Warning. Device &1 varied off while in session.
Description for device &1 created.
Description for controller &1 created.
Mode description &1 created.
Mode description &1 changed.

Length: 343211 Date: 20191013 Time: 225810

Count: 1462     sap01-206 ( 420 ms ) This documentation is copyright by IBM.

Our Service

Looking for Support? Questions?

The

Consolut

Callback-Service

Leave us your contact details and we will call you back. Panels marked with * are mandatory.