OS/400 Messages

Are you looking for the description of OS/400 (System i) messages e.g. CPF9801? Then you have come to the right place. Below you can see a (hoefully) complete list of of all OS/400 messages with all "second level texts".

Complete OS/400 Messages Documentation From CPC2626 up to CPD0904

This documentation is copyright by IBM.
Count: 1447 Skipped: 0
OS/400 Messages
Description
IOP reset for line &1 complete.
IOP reset for controller &1 complete.
IOP reset for device &1 complete.
Automatic configuration created controller description &1.
Automatic configuration created device description &1.
Automatic configuration deleted controller description &1.
Automatic configuration deleted device description &1.
Class-of-service description &1 deleted.
Class-of-service description &1 created.
Configuration list &1 created.
Configuration list &1 deleted.
Configuration list &1 changed.
Mode &1 successfully deleted.
Automatic configuration converted controller description &1.
Automatic configuration converted device description &1.
Network interface description &1 created.
Description for network interface &1 changed.
Description for network interface &1 deleted.
Automatic configuration changed device description &1.
IOP reset for network interface &1 complete.
Vary on completed for network interface &1.
Vary off completed for network interface &1.
Port sharing changed device description &1.
Connection list &1 deleted.
Connection list &1 created.
Connection list &1 changed.
Entry &2 added to connection list &1.
Entry &2 changed in connection list &1.
Entry &2 removed from connection list &1.
Entry &2 in connection list &1 renamed to &3.
CL source for &1 objects retrieved; CL source for &2 objects not retrieved.
&1 objects converted; &2 objects not converted.
NetBIOS description &1 created.
NetBIOS description &1 changed.
Network server storage space link added.
Network server storage space link removed.
Network server description &1 created.
Vary on completed for network server &1.
Vary off completed for network server &1.
Description for network server &1 deleted.
Description for network server &1 changed.
Description for NetBIOS description &1 deleted.
Remove network server storage link completed with errors.
Status of drive resource in device &1 changed successfully.
Vary on completed with errors for network server &1.
IPX description &1 created.
IPX description &1 changed.
Line &1 created by Advanced 36 machine.
Description for line &1 deleted by Advanced 36 machine.
Vary on completed with errors for network server &1.
Lock obtained on device &1.
Vary configuration completed for online at IPL.
&9 records updated in to-file member &6.
&7 records copied from member &3.
&7 records copied from member &3.
No records copied from file &1 in &2.
All records copied from file &1 in &2.
&7 records copied to member &6.
Data in member &3 reorganized.
Update of sequence number and date field complete.
Question &1 changed.
PTF for problem not found on local system.
PTF for problem &1 found on local system.
File &1 restored to library &2. &4 records copied.
Alternative index &1 restored to library &2.
Restored &2 members to library &1, &4 members excluded.
Physical file &1 saved from library &2. &4 records copied.
Logical file &1 saved from library &2.
Saved &2 members from library &1.
Member &3 restored to library &2.
&3 files restored; &5 files not selected.
Saved &3 files from library &1 to set &2.
Definition &1 created and sequenced.
&1 definitions created and sequenced.
File key attributes changed.
Key field sequence attributes changed.
&1 definitions created. Last definition is &2.
Definition &1 created.
Definition &1 changed.
Definition &1 copied.
Definition &1 deleted.
Definition &1 displayed.
Definition &1 printed.
Definition &1 renamed.
&1 where used function completed.
Dictionary &1 created.
Dictionary &1 changed.
Change authority request for Dictionary &1 completed
Dictionary &1 deleted.
Definition &2 in dictionary &3 displayed.
Definition &2 in dictionary &3 printed.
File &2 created in &3.
Program-described file &2 created in &3.
Data for file &2 in &3 was changed.
File definition &2 added to dictionary.
File &2 in &3 linked.
File &2 in &3 unlinked.
Program-described files unlinked from dictionary &1.
Member &2 file &1 in &3 cleared.
Member &2 initialized with &4 records.
Member &3 file &1 in &2 changed.
Member &3 renamed to member &4.
Trigger added to file.
Trigger not added. Errors occurred.
Trigger removed from file.
Trigger not removed. Errors occurred.
Node group &1 in &2 changed.
Database Cross-Reference data for library &1 recovered.
Database Cross-Reference files successfully verified.
&3 constraint(s) added to file &1.
&3 constraint(s) removed from file &1.
&3 constraint(s) changed for file &1.
Trigger(s) changed for file &1.
&1 writers started. &2 writers did not start.
&1 writers ended. &2 writers did not end.
&1 files held. &2 files not held.
&1 files released. &2 files not released.
&1 files deleted. &2 files not deleted.
&1 files changed. &2 files not changed.
Warning: Spooled data will be lost.
Cleanup of spooled output and jobs on queues completed.
Cleanup of output queue &1 in library &2 on Auxiliary Storage Pool (ASP) &3 is complete.
&1 expired spooled files were deleted.
&1 expired spooled files were deleted from &2.
A reclaim request has been sent to the &1 spool system job.
Unused storage for &1 spooled files was reclaimed from &2.
Cleanup of output queue &1 in library &2 on Auxiliary Storage Pool (ASP) &3 was partially completed.
Unused storage for &1 spooled files was reclaimed.
User print information changed for user &1.
Output queue &1 was created in library &2 but warnings were issued.
Service not active for job &1 user &2 number &3.
Synchronization of PTF database and save files completed.
Copying of PTF information completed successfully.
All PTFs included in package.
Positioned to &1 of product &2 &3.
Positioned to position for &1 of product &2 &3.
Selected PTFs loaded for licensed program &1.
&1 PTF cover letters copied from device &2.
PTFs installed successfully.
Dump identifier is &1.
&1 objects saved from library &3.
Save System (SAVSYS) command has completed processing.
&1 objects restored from &3 to &4.
&1 objects saved from library &3. &8 objects not included.
&1 user profiles restored at &3.
Private authorities restored for user profile &1.
&1 libraries saved at &3.
No objects saved from library &1. All objects excluded.
&1 libraries restored at &3.
No libraries or objects saved.
SAVSYSISD command saved file &6.
&1 objects saved.
&1 objects saved.
&1 objects restored.
&1 objects restored.
Private authorities restored for &1 user profiles at &2.
Save or restore of entire system completed successfully.
&2 &1 restored.
&2 &1 restored without password or group linkage.
&2 &1 restored. Password and group linkages were not changed.
No objects saved, all objects were excluded.
No objects restored, all objects were excluded.
All digital certificate manager objects restored.
Save System Information (SAVSYSINF) command has completed processing.
Restore System Information (RSTSYSINF) command has completed processing.
Synchronization ID &1 started.
Synchronization ID &1 ended.
&2 objects completed for DFRID &1.
DFRID &1 removed.
All objects saved from &1 libraries.
&1 libraries saved.
&1 objects saved from library &3.
&1 objects saved from library &3. &9 objects not included.
Objects in save file &9 in &10 saved to media.
Save file &1 in library &2 cleared.
&4 objects restored for &1 option &2.
&1 objects restored. &6 objects excluded.
Licensed program &1 option &2 saved.
Licensed program &1 option &2 deleted.
Private authorities made available for &2 &1.
&2 &1 restored.
All security objects saved.
All security objects saved to save file &3.
System storage saved at &1.
System storage restored from save storage media.
All configuration objects saved.
All configuration objects saved to save file &3.
&1 objects restored. &6 objects excluded.
Work with licensed programs function has completed.
Program temporary fixes loaded for licensed program &1.
Program temporary fixes applied for licensed program &1.
Secondary language &1 restored.
Initialize System (INZSYS) processing completed successfully.
Watch session &1 successfully started.
End Watch completed successfully.
Watch session &1 successfully started but some jobs not found.
All &1 watch sessions ended.
Trace ended but trace cleanup in serviced job may not be complete.
Service ended but service cleanup in serviced job may not be complete.
STRTRC session ID &1 successfully started.
STRTRC session ID &1 started but some jobs not found.
ENDTRC session ID &1 successfully saved into library &2.
ENDTRC session ID &1 successfully deleted.
&1 members removed, &2 members not removed.
&2 session ID &1 successfully deleted.
Trace job started. Cancel ignored.
Job being serviced. Cancel ignored.
Trace records successfully deleted for trace table &1.
Restore APAR Data function completed
Delete APAR Data function completed
Save APAR Data function completed
Normal end of SNADS *SVDS sender &3/&2/&1 serving distribution queue &4.
Abnormal end of SNADS *SVDS sender &3/&2/&1 serving distribution queue &4.
Abnormal end of SNADS *SVDS receiver &3/&2/&1 using distribution queue &4.
Object &1 in &2 compressed.
Cannot compress object &1 in &2.
Cannot compress object &1 in &2.
&1 objects compressed; &8 objects not included.
Cannot decompress object &1 in &2.
&1 objects decompressed; &8 objects not included.
Object &1 in &2 decompressed.
&1KB temporary storage reclaimed.
Object &1 not compressed.
Communications side information object &1 created in library &2.
Communications side information object &1 changed in library &2.
Locale object &1 was successfully created.
Locale &1 in library &2 created with warnings.
Message catalog &1 successfully created or updated.
Table source for &1 object retrieved; table source for &2 object not retrieved.
System enabled for software agreement acceptance.
User installation processing completed.
Licensed program installation process completed successfully.
Loading of PTFs completed successfully.
Marking of PTFs for delayed application completed successfully.
Install of IBM i directories completed.
Task to prepare for install successfully completed.
Library &1 installed.
Secondary language &3 deleted.
Spelling aid dictionary &1 deleted.
Software agreement accepted for product &1 option &2.
Software agreement accepted for *MCHCOD.
*LNG objects for NLV &3 for product &1 option &2 release &4 deleted.
*PGM objects for product &1 option &2 release &4 deleted.
Objects for product &1 option &2 release &4 deleted.
Objects for product &1 option &2 release &4 saved.
*LNG objects for NLV &3 for product &1 option &2 release &4 saved.
*PGM objects for product &1 option &2 release &4 saved.
Objects for product &1 option &2 release &4 restored.
*PGM objects for product &1 option &2 release &4 restored.
*LNG objects for NLV &3 for product &1 option &2 release &4 restored.
Installation profile &1 created.
Installation profile &1 changed.
Installation profile &1 deleted.
Installation profile &1 displayed.
Objects for product &1 option &2 release &4 saved.
*LNG objects for NLV &3 for product &1 option &2 release &4 processed.
*PGM objects for product &1 option &2 release &4 processed.
Automatic installation completed successfully.
Relational database directory entry added.
Relational database directory entry changed.
Relational database directory entry removed.
All remote relational database directory entries removed.
Relational database directory empty.
Some parameters for relational database directory entry ignored.
All relational database directory entries removed.
Member &3 file &1 in &2 opened.
Member &3 file &1 in &2 closed.
Contents of volume on device &1 set to density &4.
Diagnostic message was issued for file &2.
Device &1 held.
Device &1 released.
Device &1 automatic error recovery ended.
Device &1 automatic error recovery resumed.
Controller &1 automatic error recovery ended.
Controller &1 automatic error recovery resumed.
Line &1 automatic error recovery ended.
Line &1 automatic error recovery resumed.
Network interface &1 automatic error recovery ended.
Network interface &1 automatic error recovery resumed.
Command &5 completed successfully for mode &1 device &2.
The &1 command completed successfully for all modes.
Panel group &1 successfully created in library &2.
Binder language added to member &1 in file &2 in library &3 for &4 objects. &5 objects not included.
Binding directory &1 created in library &2.
&1 entries added, &2 entries not added to Binding directory &3 in library &4.
Program &1 created in library &2.
&1 entries removed, &2 entries not removed from Binding directory &3 in library &4.
Program &1 not created because OPTION(*NOGEN) specified.
Service program &1 created in library &2.
Module &1 in library &2 changed.
No change required for module &1 in library &2.
&1 modules changed. &2 modules did not require change.
Service program &1 not created because OPTION(*NOGEN) specified.
Service program &1 in &2 changed.
No change required for service program &1 in &2.
&1 service programs changed. &2 service programs did not require change.
Program &1 in &2 updated.
Service program &1 in &2 updated.
Program &1 not updated because OPTION(*NOGEN) specified.
Service program &1 not updated because OPTION(*NOGEN) specified.
Program profiling started.
Program profiling ended.
Customization object &1 created successfully.
Produced &2 duplicates of diskette in device &1.
Rename diskette completed. &1 diskette processed.
Clear diskette completed. &1 diskette processed.
Delete diskette label completed. &1 diskette processed.
Volume ID &2 found on diskette in device &1.
Volume &2 with file &3 found in &1.
Display of command &1 in library &2 complete.
Command &1 in library &2 changed.
Default values changed for command &1.
&6 files on volume &2 on device &1 processed.
File sequence number &3 label &5 dumped.
Volume labels for volume &2 device &1 dumped.
&1 configured and varied on successfully.
LAN information displayed successfully.
Initialize diskette completed. &1 diskette processed.
Mounted category &4 assigned.
Mounted category &4 released.
Category &4 demounted from device &1.
Category &4 mounted on device &1.
Volume &2 prepared for operation with owner ID &3.
Tape duplication completed successfully.
Nonlabeled tape volume initialized.
All file data deleted from volume &2 on device &1.
Volume &2 found on device &1.
File found at sequence number &3.
&6 cartridges added
&6 cartridges removed
Display tape cartridge complete
Library device description &1 created
Library device description &1 deleted
Category &4 created
Category &4 deleted
Display tape category complete
&6 cartridges changed
Associating receivers with journal &1 completed.
Remote journal &1 in &2 was added.
Remote journal &1 in &2 was removed.
Remote journal &1 in library &2 was inactivated.
Remote journal &1 in library &2 was activated.
Print descriptor group &1 created in library &2.
PDG profile changed for user &1.
Remote definition for system &1 &2 added.
Remote definition for system &1 &2 removed.
All remote definitions removed.
Remote definition for system &1 &2 changed.
Requested information has been printed.
List saved for user &1
List restored for user &1
Panel group added to search index.
All references to panel group have been removed.
&1 command document(s) created successfully.
&1 of &4 objects have started journaling.
&1 of &2 objects have ended journaling.
&1 of &2 objects changed.
Recovery count has been changed to &1.
Journal attribute &1 has been changed to &2.
Journal &1 created in library &2.
Journal receiver &1 created in library &2.
&7 entries compared for member &3.
File &1 started journaling to journal &3.
&2 of &3 files have started journaling.
File &1 in &2 ended journaling.
&1 of &2 files have ended journaling.
&5 access paths for file &1 started journaling.
&1 files have started access path journaling.
&5 access paths for file &1 ended journaling.
&1 files have ended access path journaling.
&9 entries applied to *&10 object.
Journal conversion completed.
Conversion recovery complete for file &1 in &2.
&7 entries applied to &8 objects.
&7 entries removed for &8 objects.
&9 entries removed from *&10 object.
&4 entries converted from journal &1 in &2.
&4 entries received from journal &1 in &2.
Recovery times changed successfully.
System Service Tools detected function check. CAUTION: Any device(s) in diagnostic mode not reset.
System Service Tools detected function check. See message CPF5263.
File &1 created in library &2.
File &1 created in &2 with SRTSEQ.
File &1 in library &2 changed.
Member &1 added to file &2 in &3.
Member &1 removed from file &2 in &3.
&4 files changed for file &1 in library &2.
Device added to file &1 in library &2.
Devices removed from file &1 in &2.
&4 members removed for &1.
Device changed in file &1 in library &2.
&1 problem records deleted.
Problem &1 successfully changed.
Changes to the text for problem &1 were saved.
&1 entries removed from sphere of control.
&1 entries added to sphere of control.
&1 alerts deleted from the alert database.
Alert created.
Alert created in job &3/&4/&5.
Alert description &1 added to alert table &2 in library &3.
Connection complete to remote application.
Remote support enabled.
Remote support disabled.
Order assistance request received by remote system
File &1 successfully received by remote system.
Order information file &1 created.
Order assistance request sent to &1.
Answer sent to &1.
Network job entry &1 &2 added.
Network job entry &1 &2 changed.
Network job entry &1 &2 removed.
File &1 sent to &2 users. Not sent to &3 users.
File &1 in &2 member &3 sent to &4 users. Not sent to &5 users.
Input stream in file &1 in &2 member &3 sent to &4 users. Not sent to &5 users.
Message sent to &1 users. Not sent to &2 users.
&1 files deleted. &2 files not deleted for user &3 &4.
Member &6 in &5 number &7 deleted for user &3 &4.
File &1 member &2 number &3 received.
Reclaim storage completed successfully.
RCLOBJOWN processing complete. &1 objects processed. &2 deleted.
RCLSTG processing complete. &1 objects processed. &2 deleted.
Read operation completed successfully.
Write operation completed successfully.
Print operation completed successfully.
Display operation completed successfully.
Alter operation completed successfully.
No diskette devices available.
Errors were detected while reading the diskette in device &1.
The data has been successfully altered.
Forced &7 has ended.
IPL recovery of commitment definition &8 for job &19/&18/&17 completed.
Commitment options changed.
Resynchronization for commitment definition &1 complete.
Resynchronization with location &12, device &13 canceled.
Post-IPL recovery of commitment definition &8 for job &19/&18/&17 completed.
End rollback request completed.
XA forget has ended.
Resynchronization with relational database &10 canceled.
Job &3/&2/&1 in progress.
System-supplied and &3 user-defined images copied.
System-supplied characters copied.
&3 user-defined characters copied.
Normal completion. No user-defined characters copied.
DBCS font table &1 created.
&3 user-defined characters copied.
&3 user-defined characters copied. &4 excluded.
No user-defined characters copied.
System-supplied characters already exist in DBCS font table &1.
DBCS font table &1 deleted.
Migration of DBCS font table &1 was successful.
DBCS conversion dictionary &1 created in library &2.
Entry &1 printed from DBCS conversion dictionary &2 in &3.
DBCS conversion dictionary &1 modified with &6 changes.
Entry &1 updated for DBCS conversion dictionary &2 in &3.
Entry &1 deleted from DBCS conversion dictionary &2 in &3.
Entry &1 added to DBCS conversion dictionary &2 in &3.
Emulation configuration entry &1 added.
Emulation configuration entry &1 changed.
Emulation configuration entry &1 removed.
Graphics messages signalled during processing.
Vector symbol set &1 created in library &2.
Image symbol set &1 created in library &2.
&1 words processed. &2 words accepted.
Dictionary &1 created with &3 words.
Finance diskette image sent to remote location &1.
Job ended abnormally for SNADS sender &3/&2/&1, serving *SNADS distribution queue &5
SNADS router &3/&2/&1 ended abnormally.
SNADS receiver &3/&2/&1 ended normally.
SNADS receiver &3/&2/&1 ended abnormally.
Queue &1 added.
System name/Group &1 &2 added to routing table.
&1 &2 was changed in the routing table.
Entry &1 &2 was removed from the routing table.
Distribution queue &1 was changed.
Distribution queue &1 was removed.
&1 &2 was added to the secondary system name table.
Entry &1 &2 was removed from the secondary system name table.
Job ended normally for SNADS sender &3/&2/&1, serving *SNADS distribution queue &5
Job ended abnormally for SNADS gateway sender &3/&2/&1, serving &5 distribution queue &4.
Receive function for DSNX object distribution ended abnormally.
DSNX request processor ended.
DSNX host interface function ended abnormally.
User profile not found.
DSNX cannot be received temporarily.
Job ending status for DSNX was &1.
Phase &1 released by NetView Distribution Manager.
Printer resource type &1 &2 created in library &3.
Printer resource type &1 &2 created in library &3 with modifications.
PSF configuration &1 created in library &2.
PSF configuration &1 in library &2 changed.
Pass-through ended normally.
User ID and address &1 &2 renamed successfully.
User ID and address &1 &2 backed out successfully.
Document &2 was copied from folder &1.
Document &2 moved from folder &1.
&2 of type &4 renamed in folder &1.
Document &2 or folder &3 deleted from folder &1.
&1 objects deleted.
Folder &1 created.
Initialization of document detail files complete.
Activity related to documents and folders is now allowed.
All documents and folders are now available.
&2 of type &4 in folder path &1 reclaimed.
&1 objects reorganized; &2 bytes of storage made available.
&1 objects processed.
Dump successful for &2 of type &4 in folder &1.
Dump successful for &2 of type &4 in folder &1.
Problem reporting complete. &1 answered, &2 not answered.
Problem &2 not sent.
Problem reporting complete. Service number is &1.
PTF order complete. The PTF order ID number is &1.
Problem reporting complete. No service number assigned.
PTF order complete. No service number assigned.
Service attribute &1 changed to &2 in &3 by &4/&5/&6.
Service attribute &1 changed to &2 by &3/&4/&5.
Optical image is being created for download.
The PTF order &1 has been submitted.
The PTF order &1 has been canceled.
Text associated with &1 problem ID copied to Integrated File System (IFS) file.
System/36 folder &1 restored into folder &4.
Document &2 restored in folder &7.
System/36 folder &1 restored into folder &4 with changes.
Dictionary &1 restored as dictionary &3 in library &3.
Subdirectory &8 restored in folder &7.
Subdirectory &8 partially restored in folder &7.
Subdirectory &8 not restored.
Document &2 not restored.
Display Access Code (DSPACC) command processing completed.
Access code &1 added.
Document interchange session ended for user &1.
No document lists found to delete.
Document password for user &1 changed.
Document list &1 created for user &2. Search name &3.
User permission given for &1 users.
User permission removed for &1 users.
Request distribution from user profile &1 completed.
Obtain distribution for user profile &1 completed.
Cancel distribution for &1 completed.
List request from &1 completed for &4 distributions.
Access code authority granted (Grant Access Code Authority (GRTACCAUT) command) to &1 users.
Access code authority revoked (Revoke Access Code Authority (RVKACCAUT) command) from &1 users.
Removed &1 access codes.
Owner changed for document library object &1.
Output successfully generated.
Document &1 returned for user &2.
Document &1 was deleted for user &2.
Display Access Code Authority (DSPACCAUT) command completed.
Display User Permission (DSPUSRPMN) command has completed processing.
Document &1 filed for user &2.
&1 document library objects restored.
Document &1 changed for user &2.
Entry &1 &2 added to the directory.
Directory entry for &1 &2 was changed.
List ID &1 &2 created in the directory.
Document &1 was replaced by user &2.
User &1, User ID &2 &3 removed.
Requested distribution complete, &1 distributions.
Distribution received and copied.
&1 distributions have been deleted successfully.
Send distribution completed successfully.
Document filed successfully.
The document description has been changed.
Search of document library completed successfully.
Document retrieved successfully from library.
Document has been replaced successfully in library.
Auditing level successfully changed.
Description for user ID and address &1 &2 removed from directory.
Authority changes made to &1 document library objects.
Request submitted &1 to file document into library &2 completed.
Primary group changed for document library object &1.
Request submitted &1 to search document library &2 completed.
Request submitted &1 to copy a document from document library &2 completed.
Request submitted &1 to delete document from library &2 completed.
&1 folders restored.
&1 document library objects restored.
Request submitted &1 to print document from library &2 completed.
Request submitted &1 to change document details in library &2 completed.
Document &1 in folder &2 successfully deleted.
Distribution description changed.
&1 document library objects saved.
Initialization of directory and distribution files complete.
Conversion of mail logs complete.
Initialization of calendar files complete.
Initialization of office files complete.
Conversion of document list system objects complete.
Start directory shadowing command successful.
End directory shadow controlling job successful.
Print of directory submitted to job queue.
Supplier &1 removed. Shadowed directory information not removed.
Directory shadow collector &1 removed.
Shadowing for supplier system &1 will be resumed.
Locations were combined.
Directory attributes changed.
Shadowing suspended for directory shadow system &1.
Directory shadow system &1 changed.
The list of directory shadow systems has been printed.
Directory shadow collector &1 removed.
Directory shadow system &1 added.
&1 successfully shadowed.
System successfully initialized with shadowed data from &1.
Authority to locally owned data granted to &1.
Authority to locally owned data revoked from &1.
The local system has shadowed &1 records from supplier system &2.
Location &1 added.
Directory data copied.
Location &1 changed.
Details for the location were printed.
Details for all locations were printed.
Directory shadow supplier &1 removed.
Command completed on target system.
Twinaxial configuration completed successfully.
Token-ring configuration completed successfully.
SDLC configuration completed successfully.
Asynchronous configuration completed successfully.
5394 remote configuration completed successfully.
Ethernet configuration completed successfully.
User &1 enrolled. Password same as user profile.
User &1 already enrolled to use IBM i Access.
User &1 enrolled to use IBM i Access.
Round-trip (in milliseconds) min/avg/max = &1/&2/&3
Command did not complete on the specified wait time.
Selection entry with sequence number &4 added.
Action entry for group &4 added.
Selection entry with sequence number &4 removed.
Action entry for group &4 removed.
Selection entry with sequence number &4 changed.
Action entry for group &4 changed.
Filter &2 in library &1 changed.
Password changed for controller &1.
&6 records loaded to member &3 file &1 in library &2.
&6 records were read from member &3 file &1 in library &2.
&6 records loaded to member &3 file &1 in library &2.
File &1 created in library &2, but some parameters were ignored.
Problem analysis results recorded in the problem log.
Initialization of library files complete.
&1 document library objects saved.
Node list entry added.
Node list entry removed.
Network server configuration &1 created.
Network server configuration &1 deleted.
Network server configuration &1 changed.
Network server configuration &1 request processed.
Object &2 type *&5 created in library &3.
Printer output created.
User &1 no longer enrolled in directory.
Line &1 added.
Controller &1 added.
Device &1 added.
Remote system &1 added.
Line &1 removed.
Controller &1 removed.
Device &1 removed.
Configuration now operational.
Line &1 made available.
Controller &1 made available.
License information changed.
Peak usage is reset to 0.
&1 license key information records added to repository.
&1 license key information records removed from repository.
Request to &1 feature &2 processed successfully.
The current version of Master Key &1 has been set.
Directory is using Unicode Case Mapping Version &2
Stream file copied to object.
Object copied.
Directory created.
Object renamed.
Directory removed.
Object moved.
Object copied.
Link added.
Link removed.
Object checked in.
Current directory changed.
&1 file system mounted.
&1 directory created.
Object checked out.
Specified path refers to a system object at address &1.
Directory created. Object is &1.
Object created. Object is &1.
Print &1 configuration completed.
Internet address converted.
SNA network identifier and location name converted.
IP over SNA type of service changed successfully.
IP over SNA interface &1 started.
IP over SNA interface &1 ended.
File system mounted.
File system or directory unmounted.
The Network File System server daemon has ended.
Specified path refers to an attached object at address &1.
Start of RPCBind daemon completed successfully.
End of RPCBind daemon completed successfully.
RPCBind daemon is already running.
CVTRPCSRC or RPCGEN command completed successfully.
Directory conversion completed. &1 links processed.
Start NFS server command completed successfully.
End NFS server command completed successfully.
User-defined file system created.
User-defined file system deleted.
Export request completed successfully.
&1 entries exported, &2 entries not exported.
Request to release locks submitted to *NLM NFS server daemon job &1.
Locks were released. Object is &1.
&1 created.
Scroller printed.
Scroller not printed.
Network server alias &1 created.
Network server storage space &1 created.
Network server alias &1 deleted.
Network server alias &1 changed.
Network server storage space &1 deleted.
Command submitted to server &1.
Network server message sent.
Request to add remote server &1 sent.
Session &1 on server &2 ended.
Network server storage space &1 changed.
Server &1 restarted.
Remove request submitted successfully.
INSNTWSVR command complete.
Network server attributes changed successfully.
Network server user attributes changed successfully for user profile &1.
NetWare source copied successfully.
New upgrade environment &1 created.
Upgrade environment &1 set.
Upgrade values set successfully.
Licensed program planning information defined.
System information printed successfully.
Status of libraries at priority &1 changed.
Status of libraries at priority &1 cleared.
Upgrade method selected.
Libraries at priority &1 saved successfully.
Enhanced Upgrade Assistant for i5/OS task &1 completed.
Upgrade method not selected or changed.
Upgrade values reset successfully.
System information successfully retrieved.
Disk preparation option changed to &1.
Save or restore option completed successfully.
Disk preparation scheduled.
Upgrade preparation information successfully collected.
Media devices configured successfully.
Conversion of library &1 successful.
System information for type &1 successfully updated.
Environment variable added.
Environment variable changed.
Environment variable list printed.
Environment variable printed.
User Trace option changed for job &3/&2/&1.
User Trace buffer cleared for job &3/&2/&1.
User Trace data for job &3/&2/&1 dumped to member &4 in file &5 in library &6.
&1 User Trace buffer(s) deleted.
Environment variable removed.
Press F3 to exit terminal session.
Service configuration &1 created.
Service configuration &1 deleted.
Connection profile for service configuration &1 deleted.
Service mapping table entry for service configuration &1 deleted.
Service configuration &1 changed.
Verify processing completed.
&1 objects saved and restored.
&1 libraries saved and restored.
&1 document library objects saved and restored.
Vary on completed for resource &1.
Vary off completed for resource &1.
Vary on completed with errors for resource &1.
Vary on completed for system &1.
Vary off completed for system &1.
Vary on completed with errors for system &1.
OptiConnect verification test completed successfully.
OptiConnect verification test completed with errors.
Session &1 started.
Session &1 deleted.
Data member &1 removed from database
Session data &1 converted to database file members.
Session &1 saved.
Session &1 suspended.
Session &1 resumed.
Definition &1 added.
Definition changed.
PEX downlevel files successfully moved to library &1.
PEX downlevel files not moved to library &1.
Dumped &1 out of &2 available pages.
Network server application ended for network server &4.
Network server application started for network server &4.
Network server application deleted.
Network server application installed.
Conversion of priority &1 successful.
All objects from priority &1 saved successfully.
All objects from priority &1 restored successfully.
&2 of &1 objects were converted successfully by STROBJCVN.
Checking of objects was successful.
Object analysis completed successfully.
Object analysis reported successfully.
Conversion of objects was successful.
&1 statistic collection(s) requested.
&1 statistic collection(s) deleted.
Statistic collection &8 updated.
&1 statistic collection request(s) cancelled.
Thread ended abnormally.
Job Watcher job &3/&2/&1 ended successfully.
Definition &1 removed from file &2 in library &3.
Start Disk Watcher command running in job &3/&2/&1 ended successfully with reason code &4.
Job Watcher collection running in job &3/&2/&1 ended successfully with reason code &4.
&1 pages produced.
File deleted.
Access to ASP &1 is suspended.
Access to ASP &1 successfully resumed.
Operation on object signatures completed successfully. &1 objects attempted, &2 objects successful.
Library &1 migrated successfully.
Folder &1 migrated successfully.
Library &1 of size &2 KB can be moved to ASP &3.
&3 user-defined characters copied.
&3 user-defined characters copied.
&3 user-defined characters copied. &4 not copied.
&3 user-defined characters copied. &4 not copied.
Normal completion. No user-defined characters copied.
Normal completion. No user-defined characters copied.
&1 created.
Cluster Resource Services API &1 completed.
Dump request for cluster resource group &1 completed.
Image catalog &1 created in library &2.
Image catalog &1 changed.
Image catalog entry &1 changed.
Image catalog &1 loaded in device &2.
Image catalog &1 unloaded from device &2.
Image catalog &1 loaded.
Image catalog &1 deleted.
Image catalog entry removed from image catalog &1.
Image catalog &1, type &2 verified.
Image catalog entry added to image catalog &1.
Image catalog entry &2 removed from image catalog &1.
All image catalog entries removed from image catalog &1.
Image catalog entry &1 loaded.
Image catalog entry &1 unloaded.
Image catalog entry &1 mounted.
Image catalog entry &2 mounted, entry &3 loaded in catalog &1.
Image catalog entry &1 initialized.
Image catalog entry &1 duplicated.
Image catalog entry &1 dumped.
Installation langauge set.
Successful return.
The secure handshake operation was successfully started.
The secure data receive operation was successfully started.
The secure data send operation was successfully started.
Kerberos password changed successfully.
Keytab entry was removed successfully.
Credentials cache &1 deleted.
The ticket granting ticket has been created successfully.
Password changed successfully.
Keytab entry was added successfully.
&1 modules created in library &2.
ANZCMDPFR command completed successfully.
Performance collection &1 of type &2 copied.
Performance collection files successfully converted.
&1 performance collections saved from library &3.
&1 performance collections restored from &3 to &4.
IPX circuit &1 successfully added.
IPX circuit &1 successfully changed.
IPX circuit &1 successfully removed.
Print list completed.
IPX circuit &1 successfully started.
IPX circuit &1 successfully ended.
STRIPX successfully completed.
ENDIPX successfully completed.
SNA over IPX location successfully removed.
SNA over IPX location successfully changed.
SNA over IPX location successfully added.
IP over IPX address successfully added.
IP over IPX address successfully changed.
IP over IPX address successfully removed.
IPX circuit &1 added. Static routes and services required.
IP over IPX interface &1 successfully started.
IP over IPX interface &1 successfully ended.
IPX circuit route successfully removed.
IPX circuit route successfully changed.
IPX circuit route successfully added.
IPX circuit service successfully removed.
IPX circuit service successfully changed.
IPX circuit service successfully added.
Ended SPX connection &3, &4, &5, &6.
Closed IPX socket &3 &4 &5.
Print list completed.
Print details completed.
End processing successfully completed for the QIPX job.
IPX internal circuit &1 successfully added.
IPX internal circuit &1 successfully removed.
IPX internal circuit &1 successfully started.
&1 function was requested by &2.
Test problem created.
Service Agent activation completed for a network of systems or logical partitions.
Service Agent not activated for network.
Service Agent activated for network.
Entry added. Press F5=Refresh to update list.
Entry deleted. Press F5=Refresh to update list.
Entry or entries changed. Press F5=Refresh to update list.
Entry changed.
All 9337 call block records removed.
Print completed for record &1.
Analysis Requested.
Analysis date and time changed.
Service Agent activation completed for the local system.
Service information configuration changed.
Only character string expressions allowed for &2.
Exponent of floating-point number is not valid.
Selective prompt characters in wrong position.
Character following selective prompt characters not valid.
Command length not valid.
Comment allowed only in prompter comment field.
?- only allowed when ? precedes command name.
Command length exceeds &2 characters.
List displacement for parameter &2 is too large.
&1 not safe for job with multiple threads.
&2 not allowed for releases earlier than &3.
Command &3/&2 not safe for a multithreaded job.
Exit program &3/&2 called in a job that has multiple threads.
Exit program &5/&4 not found.
Maximum nesting level for parameter &2 exceeded.
Qualifier missing from qualified name &2.
Characters in qualifier beginning &2 not valid.
A matching parenthesis not found.
A matching apostrophe not found.
Label &2 not valid.
Prompt request in wrong position.
Comment not completed with */ before command ended.
String &2 contains a character that is not valid.
Built-in function name beginning &2 not valid.
Replacement command length is not valid.
Replacement command &3/&2 not allowed. Reason code &4.
Character &3 not valid following string &2.
Hexadecimal string &2 not valid.
&2 not in expression enclosed in parentheses.
Length of data starting &2 not valid.
No matching shift-in character for shift-out character.
Internal error processing variable &2.
Library changed to *CRTDFT because &1 deleted.
Library changed to *NONE because &1 deleted.
Library &2 not found.
Command &2 in &3 deleted during processing.
Command &2 in library &3 not found.
Command &2 not allowed in this setting.
Not authorized to command &2 in library &3.
String beginning &2 not valid command name.
More than one label specified on command.
Library name &2 not valid.
Automatic or selective prompting not allowed.
Label exceeds 10 characters.
Command &2 not valid in this mode.
&3 value too large for parameter &2.
No command parameter defined to receive value &2.
Parameter &2 specified more than once.
Keyword &2 not valid for this command.
Positional value cannot follow keyword parameter.
Too many qualifiers for parameter &2.
Too many values in list for parameter &2.
List or expression not valid for parameter &2.
List of values not valid for parameter &2.
Qualified name not valid for parameter &2.
Expression operator not allowed for parameter &2.
Argument number &2 of &3 must be length &4.
Argument &2 of built-in function &3 not valid.
Variable not allowed for argument &2 of built-in function.
Argument &2 built-in function &3 not a valid length.
Argument &2 of &3 does not meet relational check.
Built-in function &2 not valid.
Built-in function &3 requires &4 arguments.
Built-in function &3 allows &4 arguments.
Variable name required for argument &2 of &3.
Value for argument &2 of &3 not in allowed range.
&3 value not valid for parameter &2.
Not enough elements in list for parameter &2.
Too many elements in list for parameter &2.
Error detected on parameter &2. Internal failure.
Number of positional parameters exceeds limit of &2.
Argument &2 of &3 must be type &4.
Fractional length of argument &2 of &3 not valid.
Characters in parameter &2 not printable.
Variable &3 and &2 type not compatible.
Qualifier for parameter &2 required.
Parameter &2 required.
List item value for parameter &2 required.
*N not valid as a list value for parameter &2.
Value &3 for &2 exceeds &4 characters.
Value &3 for &2 must be &4 characters.
&3 for parameter &2 must be numeric.
Decimal point for parameter value &2 not valid.
Value &3 for parameter &2 not a valid name.
Value &3 for &2 not a name or generic name.
0 or 1 required for parameter &2.
Variable name required for parameter &2.
Value &3 for parameter &2 not a valid date.
Value &3 for parameter &2 not valid time.
&3 not valid for parameter &2.
Range of parameter &2 does not include &4.
Parameter &2 value must be greater than &3.
Parameter &2 value must be &3.
Parameter &2 value must be &3 or greater.
Parameter &2 value must be less than &3.
Parameter &2 value cannot be &3.
Parameter &2 value must be &3 or less.
Error detected on parameter &2. Internal failure.
&3 not valid for parameter &2.
&3 must be only value for parameter &2.
Numeric value for parameter &2 is not valid.
Hexadecimal value not allowed for parameter &2.
Hexadecimal string for parameter &2 is not valid.
Decimal value for parameter &2 is not valid.
Previous &2 errors found in embedded command &3.
Parameter &2 value too large.
Variable name &2 exceeds &3 characters.
Variable name required for parameter &2.
Variable &3 not allowed for parameter &2.
Expression not allowed for parameter &2.
Built-in function not allowed for parameter &2.
Variable &3 for &2 exceeds 21 characters.
Variable &3 for parameter &2 not valid.
Variable &3 and &2 type not compatible.
Variable &2 is referred to but not declared.
Index value for array variable &1 not valid.
Selective prompting for &2 must specify protection.
Parameter &2 value too small.
Parameter &2 value contains exponent that is not valid.
Floating-point number not allowed for parameter &2.
Generic command name not allowed.
Selective prompt characters for &2 must be ??.
Selective prompt characters must be ??, ?*, or ?-.
Command &2 not valid for current release.
Syntax of expression in parameter &2 not valid.
Operator in expression for parameter &2 not valid.
Internal parser stack overflow for parameter &2.
Internal parser stack underflow for parameter &2.
Semantic stack overflow for parameter &2.
Semantic stack underflow for parameter &2.
Operand not valid or operator missing in &2.
Value following sign not numeric value for &2.
Value not valid following *NOT or not sign for &2.
Concatenation operands must be character for &2.
Operands must be numeric for parameter &2.
Operands for relational operator not same type.
For &2, operands for logical operator not logical.
Value &3 for parameter &2 not allowed.
Value &3 for parameter &2 not allowed.
Value &3 for &2 exceeds &4 characters.
Value &3 for &2 must be &4 characters.
Major Command Groups menu is not allowed.
Value for &2 must be greater than value for &3.
Value for &2 must be equal to value for &3.
Value for &2 must be greater than or equal to value for &3.
Value for &2 must be less than value for &3.
Value for &2 must not equal value for &3.
Value for &2 must be less than or equal to value for &3.
Unicode processing not supported.
Requirements between parameters not satisfied.
Program &2 not found in library &3.
Not authorized to program &2 in &3.
Parameters do not match those in program &2 in &3.
Program &2 in &3 saved with storage freed.
Library list not changed.
Not able to allocate library &2.
Library &2 damaged.
Not authorized to library &2.
Library &2 previously deleted.
Program &2 in library &3 not found.
Not authorized to program &2 in library &3.
Parameters passed on CALL do not match those required.
Program &2 in &3 previously deleted.
Program &2 in &3 saved with storage freed.
Command &2 in library &3 not allowed.
Program &2 in &3 is not usable.
Command &2 in &3 not found.
Built-in function name &3 for &2 too long.
Argument for built-in function &3 not valid.
Positional input is not allowed for TYPE(*CMDSTR).
Embedded command &2 too long.
&3 value too long for parameter &2.
Selective prompt characters ?& and ?% not valid with TGTRLS(*PRV).
Path name cannot begin with *.
Path name pattern is not valid.
Pattern not allowed in path name directory.
Matching quote not found in path name.
Path name contains embedded nulls.
Path name not converted.
Path name not valid.
Software problem in &3.
VARY(*YES *INT4) not valid for &2.
Pattern not allowed in user name.
Path name not converted.
Unexpected message &3 received.
Service program &2 not found.
Not authorized to service program &2 in &3.
Program or service program destroyed.
Service program &2 in &3 saved with storage freed.
Number of chained proxy commands exceeds &2.
Command type must be *CMD when using EXPR(*YES).
Message identifier &2 not valid.
MODE parameter value specified more than once. Duplicate value ignored.
ALLOW parameter value specified more than once. Duplicate value ignored.
Command &2 already exists in library &3.
Library &2 not found.
PMTCTLPGM not allowed for keyword &2. Keyword not referred to by PMTCTL statement.
Compare value &2 cannot be compared with keyword &3.
Duplicate REXX exit program was specified.
LGLREL parameter ignored on first PMTCTL statement in group.
*EXEC not valid as only value for ALLOW parameter.
Value of MAXPOS parameter less than number of required parameters.
Value of MAXPOS parameter greater than number of parameters that can be specified.
CMD statement either not valid or not found in command definition source.
Label &2 not defined.
Label missing on first PMTCTL statement in group.
Hexadecimal from-value not allowed in SPCVAL or SNGVAL parameter.
Keyword &2 not valid because not preceded by ampersand.
Label &2 already defined.
&2 not valid because value is greater than number of entries on COND parameter.
More than one CMD statement specified in command definition source.
Label missing on first ELEM or QUAL statement in group of elements or qualifiers.
Keyword &2 previously defined by PARM statement.
More than 300 ELEM statements specified in group of elements.
&2 not valid because value greater than number of entries on PARM parameter.
ELEM statement not preceded by PARM statement.
QUAL statement not preceded by PARM statement.
Keyword name for CONSTANT or DFT parameter not valid with data type specified.
&2 preceded by ampersand, but not followed by relational operator and compare value.
Operand following relational operator for keyword &2 missing.
Keyword &2 not previously defined by PARM statement.
LEN value &2 specified for total length is less than 1 or exceeds 24.
LEN value &2 for decimal positions not valid.
Too many values specified on LEN parameter.
More than &2 PARM statements specified.
Parameter &2 exceeds maximum length of 10 characters.
Label not defined on PMTCTL statement.
Label not defined on ELEM or QUAL statement.
PROMPT not allowed on first qualifier in group.
TYPE parameter value not valid for first QUAL statement in group.
&2 for SNGVAL or SPCVAL parameter not valid for first QUAL statement in group.
Continuation character specified on last record in source file.
PROMPT keyword not allowed for CONSTANT parameter or when TYPE(*ZEROELEM) specified.
Using label &2 alone or on a comment, not allowed. Label ignored.
Keyword name for to-value of SPCVAL or SNGVAL parameter not valid with data type.
Keyword dependency not valid with PASSVAL(*NULL).
Default value of &2 assumed for DFT parameter.
Default value for DFT parameter not correct type or length for this parameter.
Default value for DFT parameter not one of restricted values.
DFT parameter default does not meet requirements of REL or RANGE parameter.
DFT value required on SNGVAL, SPCVAL, or VALUES parameter for list of like values.
First value on RANGE parameter greater than second value.
Value &2 not valid time.
Value &2 not valid date.
More than three levels of nesting specified for keyword &2.
Required list or qualified name of all optional elements or qualifiers not allowed.
List defined specifying itself as an element.
Value &2 less than minimum required for data type. Minimum value assumed.
Value &2 greater than maximum allowed for data type. Maximum value assumed.
Required parameter not allowed after optional parameter. Optional parameter assumed.
CONSTANT not specified correctly on QUAL statements.
Default value &2 ignored because not valid.
Compare value &2 cannot be compared with keyword &3.
CHOICE(*VALUES) specified, but not all values fit.
Keyword &2 and &3 cannot be compared because types not compatible.
Keyword &2 not valid operand when comparing parameters.
Default or constant value required as from-value on SNGVAL parameter.
Special value &2 not valid.
PASSATR(*YES) and VARY(*NO) cannot be used if RTNVAL(*YES) specified.
Value &2 not valid for data type specified.
Value &2 not valid for type and length specified.
CONSTANT parameter value does not meet requirements of REL or RANGE parameters.
DFT parameter value does not meet requirements of REL or RANGE parameters.
Value &2 not valid for type and length specified.
Keyword &2 not valid operand when comparing parameters.
Keyword &2 not allowed for CTL parameter because PMTCTL(*PMTRQS) was specified for keyword.
RTNVAL(*YES) valid only in CL programs or REXX procedures.
Keyword &2 does not exist.
Default value of null pointer assumed.
Default value &2 assumed for TYPE(*DATE) or TYPE(*TIME).
Required ELEM following optional ELEM not allowed. Optional ELEM assumed.
Required QUAL following optional QUAL not allowed. Optional QUAL assumed.
TYPE(*CMD) allowed only on IF, ELSE, and MONMSG commands.
Keyword &2 not required when comparing parameters.
Value &2 not allowed for DFT, VALUES, SNGVAL, or SPCVAL for keyword &3.
KEYPARM(*YES) not allowed with PMTCTL.
Prompt file &2 in library &3 not found.
Not authorized to prompt file &2 in library &3.
Size of command &2 cannot be greater than 32K bytes.
Internal size of command &2 may exceed maximum length for processing.
Size of &2 exceeds maximum length for processing.
Parameter &2 not allowed for CTL parameter because RTNVAL(*YES) was specified for parameter.
Keyword &2 not allowed for CTL parameter.
COND(*UNSPCFD) not allowed because keyword &2 is required.
PMTCTL statement refers to keyword controlled by statement.
Keyword &2 must be prompted before keyword &3.
Prompt override program specified but no parameters with KEYPARM(*YES) found.
Parameters with KEYPARM(*YES) found but no prompt override program specified. KEYPARM(*NO) assumed.
MAX > 1 not allowed with KEYPARM(*YES).
Parameter with KEYPARM(*YES) follows a parameter with KEYPARM(*NO). KEYPARM(*NO) assumed.
KEYPARM(*YES) specified for all parameters.
PARM with KEYPARM(*NO) is prompted before a PARM with KEYPARM(*YES).
Keyword &2 not valid as controlling parameter.
More than one PARM statement with TYPE(*CMDSTR) specified.
File with OPNID value of &1 not previously declared.
DCLF with OPNID parameter &1 declared previously.
SUBR command not allowed.
No matching SUBR command for ENDSUBR command.
Length specified not valid for integer variable.
No matching ENDSUBR command for SUBR command.
Only SUBR and ENDPGM commands can follow an ENDSUBR command.
Subroutine &1 does not exist.
Label &1 not defined in subroutine &2.
Subroutine &1 previously defined at statement &2.
RTNSUBR command not allowed.
Subroutine &1 defined but not called.
RTNVAL must be variable of TYPE(*INT) LEN(4).
DCLBINFLD(*INT) parameter is ignored.
RTNVAL cannot be stored in a CL variable of TYPE(*INT) LEN(4).
No reachable executable commands found in source file.
Variable &1 specified for BASPTR can not be based.
Storage &1 not allowed for variable passed into program.
Variable &1 not valid on the ADDRESS keyword.
DCLPRCOPT command specified more than once in CL procedure.
No user libraries in library list &1.
Program &2 not found in library &1.
Library &1 does not contain any program objects.
Object domain error for program &1 in library &2.
Program &2 in &1 not accessible.
CL program &2 in &1 cannot be accessed.
CL program &2 in &1 damaged.
CL program &2 in library &1 destroyed.
CL program &2 in &1 logically damaged.
Program &2 in &1 saved with storage freed.
Program &2 in library &1 not found.
Library &1 damaged.
Library &1 destroyed.
Library &1 not available.
Library &1 not found.
Library &1 saved with storage freed.
PRTCMDUSG command ended because function check occurred.
Not authorized to CL program &2 in &1.
Not authorized to library &1.
Internal failures in CL program &2 in &1.
*NOCRT cannot be specified with parameters that could force program or service program re-creation.
Card files not allowed.
SECURITY(2 *PASSWORD) not allowed.
DSPSIZ value of 12 by 80 not allowed.
DSPSIZ value of 16 by 64 not allowed.
DSPSIZ values of 12 by 80 and 16 by 64 not allowed.
QCONSOLE device in file not allowed.
Device file saved before System/38 Release 5 not allowed.
File &1 not saved for &7.
File &1 in library &2 already exists.
The &3 keyword is specified at a level that is not supported on &7.
&3 DDS keyword not supported on &7.
Value on SFLPGMQ keyword not supported on &7.
Option indicators not supported on &3 DDS keyword.
Device file cannot be saved for &7.
Format of BARCODE DDS keyword not supported on &7.
Third paper drawer not supported on Release 1.0.
Keyword parameter not supported on &7.
Keyword not allowed with data type on &7.
Graphic data type not allowed on &7.
Data type not allowed on &7.
Constant field with POSITION keyword not supported on &7.
DEVTYPE(&2) not allowed.
Workstation Customizing Object (WSCST) value not allowed.
Value on &5 not supported for &6 on &7.
Value on &5 not supported on &7.
Value on &5 not supported on &7.
Command parameter &5 not supported for device entry &6.
Value for &5 not supported in &7.
Parameter &5 not supported on &7.
File &1 not saved for &7.
Save file contains more than &5 records.
Value on &5 not supported on &7.
Command with continuation character precedes end of file.
Initial value not allowed for variable passed into program.
Number of temporary variables exceeds 200.
Length required. Initial value too long for variable type.
Hexadecimal initial value does not match variable type.
Depth of nested DO commands is greater than 25.
No matching DO command for ENDDO command. ENDDO ignored.
Command &1 cannot be used as a parameter value.
Command &1 not allowed for EXEC parameter.
VAR parameter not variable or allowable built-in function.
Operands in expression not same type.
Operand &1 does not have valid type for operator.
Values of VAR and VALUE parameters not same type.
No matching ENDDO command for DO command for &1 do groups.
Label &1 does not exist.
Data area &1 not found.
Label &1 previously defined at statement &2.
Depth of nested IF commands is greater than 10.
Variable &1 is used as parameter but not declared.
Program contains batch and interactive commands.
Hexadecimal value does not have required length specified.
No matching IF command for ELSE command.
Member &1 is in device file, not source file.
Null string not valid for this command.
End of source file reached without ENDPGM command.
Variable &1 declared but not referred to.
Variable &1 is referred to but not declared.
PGM command cannot be nested in program. Command ignored.
No executable commands found in source file.
Decimal positions not valid for this variable.
Expression on &1 command not logical type.
Length specified is too long for variable type.
Size of program exceeds machine limit.
Maximum storage allocated for user profile exceeded.
Cancel reply received while processing file &1.
Declare command occurs after first operable command.
Not authorized to data area &1.
Variable &1 cannot contain program name.
Variable &1 cannot contain library name.
PGM command missing.
GOTO branches to itself.
Parameter &1 specified more than once.
Unable to open source file &1 in &2.
Initial value does not match variable type and length.
%SWITCH mask &1 wrong length or wrong characters.
Number of decimal positions exceeds length of variable.
Command definition previously deleted.
Number of decimal positions in initial value exceeds nine.
Number of MONMSG commands is &1. Maximum allowed is &2.
Data area &1 previously deleted.
Ensure the following messages are correctable by prompting.
No variables declared in program.
Message identifier &1 not valid.
Data area &1 already declared in another library.
The preceding errors may be caused by previous release incompatibility.
Variable &2 not character or decimal variable.
Variable &2 not character or logical variable.
Command &1 not allowed in an ILE module.
Length of data area exceeds limits.
Library damaged or destroyed.
Result of built-in function not same type as operator.
Expression requires temporary variable larger than 32767 bytes.
Data area or variable &1 previously declared.
Library &2 for data area &1 not found.
Depth of nested ELSE commands is greater than 10.
Variable &1 not passed by program.
Program contains commands only valid for batch processing.
Program contains commands only valid when run interactively.
CL program must be created again.
Variable &2 not decimal variable.
Variable &3 for parameter &2 must be *LGL.
Variable &3 for parameter &2 must be *CHAR.
&1 and &2 cannot both be specified.
&1 and &2 cannot both be specified.
Specified values for parameter &1 in error.
Source sequence numbers not valid.
Prompt character not followed by a command.
Prompt character not allowed for command &1.
Variable &3 for parameter &2 must be TYPE(*DEC), LEN(&4,&5).
Variable &3 for parameter &2 must be *CHAR, minimum length &4.
Variable &3 for parameter &2 not valid.
&1 command not valid for TYPE(*CMDSTR) parameter.
Compiler ended abnormally. See message &1.
RTNVAL parameter not variable or allowable built-in function.
No command specified on &1 command.
Data type of variable &1 not valid for argument.
No labels used in program.
No data areas, variables, or labels used in program.
Qualified command &1 found in previous release library &2.
Variable &1 declared with length less than 8.
Value missing on parameter &1.
Conversion of expression result not allowed.
OPTION(*NOGEN) not allowed.
Unable to allocate library &1 for insertion.
Value for parameter &2 overridden by &3 command.
Command &1 not valid for include processing.
The PGM and SRVPGM parameters are mutually exclusive.
A value must be specified for PGM or SRVPGM when MODULE(*PGM) specified.
Character attributes of variable &1 not valid.
Floating point variable &1 not valid in program.
Parameter &1 not allowed.
&1 command not allowed.
DBCS data in text will not be printed correctly.
Unable to access sort sequence table.
Sort sequence must be *HEX for a previous release
OUTPUT(*NONE) not allowed.
ACTGRP parameter not allowed.
LEN parameter not allowed with TYPE(*PTR).
VALUE parameter not allowed with TYPE(*PTR).
VALUE parameter not allowed with STG(*BASED) or STG(*DEFINED).
ADDRESS parameter not allowed with STG(*DEFINED) or STG(*BASED).
BASPTR parameter required when STG(*BASED) specified.
BASPTR parameter valid only when STG(*BASED) specified.
ADDRESS parameter not allowed with STG(*BASED).
DCLF command specified more than allowed in program.
Record format name &1 specified more than once.
File &1 in library &2 not found.
File &1 has more than one record format.
Display file &1 contains no source statements.
Device file &1 not a display file.
No valid record format names in RCDFMT parameter.
Record format &2 not in device file &1.
Variable or data area &1 declared previously.
No record format information is available for file &1.
Variable length field not allowed for variable &1.
DBCS variable length field not allowed for variable &1.
Graphic field not allowed for variable &1.
ADDRESS parameter valid only with TYPE(*PTR).
Not authorized to create CL program.
Optimization level set to *NONE.
File &1 in library &2 cannot be used now.
More than 99 record format names in file &1.
Decimal attributes of variable &1 not valid.
File not previously declared.
File &1 in library &2 not available.
Type of variable &1 not character.
*FILE not valid for file with more than one record format.
Record format &1 not found in DCLF command.
Declare of &1 failed, variable &2 is not large enough.
Declare of &1 failed, variable &2 is not TYPE(*PTR).
DEFVAR parameter required when STG(*DEFINED) specified.
DEFVAR parameter valid only with STG(*DEFINED).
Variable &1 for the offset built-in is not declared TYPE(*PTR).
Pointer &1 is not 16-byte aligned.
Attributes of routing data variable &1 not valid.
No corresponding RCVF, SNDF, or SNDRCVF command.
Routing data variable &1 not previously declared.
Program &1 in library &2 already exists.
Data area &1 not previously declared.
ACTGRP and STGMDL(*TERASPACE) not allowed with DFTACTGRP(*YES).
&1 command found outside of SELECT group.
WHEN, OTHERWISE, or ENDSELECT command expected.
WHEN command found after OTHERWISE command.
OTHERWISE command previously specified in SELECT group.
No WHEN commands found in SELECT group.
WHEN or OTHERWISE command is not complete.
&1 command found outside of DO group.
Not authorized to library &1.
Library &1 not found.
Not authorized to file &1 in library &2.
Value of &1 for &2 not valid program name.
Value of &1 for &2 not valid library name.
Argument &1 not valid for built-in function &2.
Built-in function &1 not valid for S/38 environment.
Start position not valid for variable &1.
Label not valid when no command specified on EXEC parameter.
Specified length not valid for variable &1.
Length and start position will extend past &1.
Messages cannot be monitored on this command.
&1 MONMSG commands specified. Maximum allowed is &2.
&1 MONMSG commands specified. Maximum allowed is &2.
EXEC parameter in MONMSG must be GOTO command.
Label &1 is not valid for &2 command.
DO group label stack exceeds 100 labels.
Variable &2 for parameter &1 must be declared TYPE(*INT) or TYPE(*UINT).
Only numeric expressions allowed for &1.
Controller &1 type not valid for alert processing.
Specified value not allowed.
Value specified for default mode not valid.

Length: 334272 Date: 20191117 Time: 234202

Count: 1447     sap01-206 ( 573 ms ) This documentation is copyright by IBM.

Our Service

Looking for Support? Questions?

The

Consolut

Callback-Service

Leave us your contact details and we will call you back. Panels marked with * are mandatory.